diff options
Diffstat (limited to 'board/gateworks/venice/spl.c')
| -rw-r--r-- | board/gateworks/venice/spl.c | 33 |
1 files changed, 32 insertions, 1 deletions
diff --git a/board/gateworks/venice/spl.c b/board/gateworks/venice/spl.c index b819c6846d..533d44a07a 100644 --- a/board/gateworks/venice/spl.c +++ b/board/gateworks/venice/spl.c @@ -16,6 +16,7 @@ #include <asm/mach-imx/iomux-v3.h> #include <asm/arch/clock.h> #include <asm/arch/imx8mm_pins.h> +#include <asm/arch/imx8mn_pins.h> #include <asm/arch/sys_proto.h> #include <asm/mach-imx/boot_mode.h> #include <asm/arch/ddr.h> @@ -41,6 +42,7 @@ static void spl_dram_init(int size) struct dram_timing_info *dram_timing; switch (size) { +#ifdef CONFIG_IMX8MM case 1: dram_timing = &dram_timing_1gb; break; @@ -54,16 +56,34 @@ static void spl_dram_init(int size) printf("Unknown DDR configuration: %d GiB\n", size); dram_timing = &dram_timing_1gb; size = 1; +#endif +#ifdef CONFIG_IMX8MN + case 1: + dram_timing = &dram_timing_1gb_single_die; + break; + case 2: + if (!strcmp(gsc_get_model(), "GW7902-SP466-A") || + !strcmp(gsc_get_model(), "GW7902-SP466-B")) { + dram_timing = &dram_timing_2gb_dual_die; + } else { + dram_timing = &dram_timing_2gb_single_die; + } + break; + default: + printf("Unknown DDR configuration: %d GiB\n", size); + dram_timing = &dram_timing_2gb_dual_die; + size = 2; +#endif } printf("DRAM : LPDDR4 %d GiB\n", size); ddr_init(dram_timing); - writel(size, M4_BOOTROM_BASE_ADDR); } #define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) #define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) +#ifdef CONFIG_IMX8MM static iomux_v3_cfg_t const uart_pads[] = { IMX8MM_PAD_UART2_RXD_UART2_RX | MUX_PAD_CTRL(UART_PAD_CTRL), IMX8MM_PAD_UART2_TXD_UART2_TX | MUX_PAD_CTRL(UART_PAD_CTRL), @@ -72,6 +92,17 @@ static iomux_v3_cfg_t const uart_pads[] = { static iomux_v3_cfg_t const wdog_pads[] = { IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), }; +#endif +#ifdef CONFIG_IMX8MN +static const iomux_v3_cfg_t uart_pads[] = { + IMX8MN_PAD_UART2_RXD__UART2_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), + IMX8MN_PAD_UART2_TXD__UART2_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static const iomux_v3_cfg_t wdog_pads[] = { + IMX8MN_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), +}; +#endif int board_early_init_f(void) { |