2 files changed, 1 insertions, 77 deletions
diff --git a/board/freescale/mx28evk/MAINTAINERS b/board/freescale/mx28evk/MAINTAINERS
index 597118d3f6..c565010ccf 100644
--- a/board/freescale/mx28evk/MAINTAINERS
+++ b/board/freescale/mx28evk/MAINTAINERS
@@ -2,6 +2,7 @@ MX28EVK BOARD
 M:	Fabio Estevam <festevam@gmail.com>
 S:	Maintained
 F:	board/freescale/mx28evk/
+F:	arch/arm/dts/imx28-evk.dts
 F:	include/configs/mx28evk.h
 F:	configs/mx28evk_defconfig
 F:	configs/mx28evk_auart_console_defconfig
diff --git a/board/freescale/mx28evk/mx28evk.c b/board/freescale/mx28evk/mx28evk.c
index 21c9cb1128..88c3bf3608 100644
--- a/board/freescale/mx28evk/mx28evk.c
+++ b/board/freescale/mx28evk/mx28evk.c
@@ -72,80 +72,3 @@ int board_init(void)
 
 	return 0;
 }
-
-#ifdef	CONFIG_CMD_MMC
-static int mx28evk_mmc_wp(int id)
-{
-	if (id != 0) {
-		printf("MXS MMC: Invalid card selected (card id = %d)\n", id);
-		return 1;
-	}
-
-	return gpio_get_value(MX28_PAD_SSP1_SCK__GPIO_2_12);
-}
-
-int board_mmc_init(struct bd_info *bis)
-{
-	/* Configure WP as input */
-	gpio_direction_input(MX28_PAD_SSP1_SCK__GPIO_2_12);
-
-	/* Configure MMC0 Power Enable */
-	gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
-
-	return mxsmmc_initialize(bis, 0, mx28evk_mmc_wp, NULL);
-}
-#endif
-
-#ifdef	CONFIG_CMD_NET
-
-int board_eth_init(struct bd_info *bis)
-{
-	struct mxs_clkctrl_regs *clkctrl_regs =
-		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
-	struct eth_device *dev;
-	int ret;
-
-	ret = cpu_eth_init(bis);
-	if (ret)
-		return ret;
-
-	/* MX28EVK uses ENET_CLK PAD to drive FEC clock */
-	writel(CLKCTRL_ENET_TIME_SEL_RMII_CLK | CLKCTRL_ENET_CLK_OUT_EN,
-	       &clkctrl_regs->hw_clkctrl_enet);
-
-	/* Power-on FECs */
-	gpio_direction_output(MX28_PAD_SSP1_DATA3__GPIO_2_15, 0);
-
-	/* Reset FEC PHYs */
-	gpio_direction_output(MX28_PAD_ENET0_RX_CLK__GPIO_4_13, 0);
-	udelay(200);
-	gpio_set_value(MX28_PAD_ENET0_RX_CLK__GPIO_4_13, 1);
-
-	ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
-	if (ret) {
-		puts("FEC MXS: Unable to init FEC0\n");
-		return ret;
-	}
-
-	ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE);
-	if (ret) {
-		puts("FEC MXS: Unable to init FEC1\n");
-		return ret;
-	}
-
-	dev = eth_get_dev_by_name("FEC0");
-	if (!dev) {
-		puts("FEC MXS: Unable to get FEC0 device entry\n");
-		return -EINVAL;
-	}
-
-	dev = eth_get_dev_by_name("FEC1");
-	if (!dev) {
-		puts("FEC MXS: Unable to get FEC1 device entry\n");
-		return -EINVAL;
-	}
-
-	return ret;
-}
-
-#endif