diff options
Diffstat (limited to 'board/freescale/mx53evk/mx53evk.c')
| -rw-r--r-- | board/freescale/mx53evk/mx53evk.c | 17 |
1 files changed, 11 insertions, 6 deletions
diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c index fd821c0b1d..eab9c5f7d4 100644 --- a/board/freescale/mx53evk/mx53evk.c +++ b/board/freescale/mx53evk/mx53evk.c @@ -32,6 +32,7 @@ #include <i2c.h> #include <mmc.h> #include <fsl_esdhc.h> +#include <pmic.h> #include <fsl_pmic.h> #include <asm/gpio.h> #include <mc13892.h> @@ -124,12 +125,16 @@ static void setup_i2c(unsigned int port_number) void power_init(void) { unsigned int val; + struct pmic *p; + + pmic_init(); + p = get_pmic(); /* Set VDDA to 1.25V */ - val = pmic_reg_read(REG_SW_2); + pmic_reg_read(p, REG_SW_2, &val); val &= ~SWX_OUT_MASK; val |= SWX_OUT_1_25; - pmic_reg_write(REG_SW_2, val); + pmic_reg_write(p, REG_SW_2, val); /* * Need increase VCC and VDDA to 1.3V @@ -137,16 +142,16 @@ void power_init(void) */ if (is_soc_rev(CHIP_REV_2_0) == 0) { /* Set VCC to 1.3V for TO2 */ - val = pmic_reg_read(REG_SW_1); + pmic_reg_read(p, REG_SW_1, &val); val &= ~SWX_OUT_MASK; val |= SWX_OUT_1_30; - pmic_reg_write(REG_SW_1, val); + pmic_reg_write(p, REG_SW_1, val); /* Set VDDA to 1.3V for TO2 */ - val = pmic_reg_read(REG_SW_2); + pmic_reg_read(p, REG_SW_2, &val); val &= ~SWX_OUT_MASK; val |= SWX_OUT_1_30; - pmic_reg_write(REG_SW_2, val); + pmic_reg_write(p, REG_SW_2, val); } } |