diff options
Diffstat (limited to 'board/freescale/mpc8548cds/mpc8548cds.c')
| -rw-r--r-- | board/freescale/mpc8548cds/mpc8548cds.c | 69 |
1 files changed, 58 insertions, 11 deletions
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index a8d57cdddef..e5563f7c759 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c @@ -33,6 +33,9 @@ #include <miiphy.h> #include <libfdt.h> #include <fdt_support.h> +#include <tsec.h> +#include <fsl_mdio.h> +#include <netdev.h> #include "../common/cadmus.h" #include "../common/eeprom.h" @@ -81,12 +84,10 @@ local_bus_init(void) volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; - uint lbc_hz; sys_info_t sysinfo; get_sys_info(&sysinfo); clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; - lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; gur->lbiuiplldcr1 = 0x00078080; if (clkdiv == 16) { @@ -115,7 +116,6 @@ void lbc_sdram_init(void) uint idx; volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; - uint cpu_board_rev; uint lsdmr_common; puts("LBC SDRAM: "); @@ -137,7 +137,6 @@ void lbc_sdram_init(void) /* * MPC8548 uses "new" 15-16 style addressing. */ - cpu_board_rev = get_cpu_board_revision(); lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON; lsdmr_common |= LSDMR_BSMA1516; @@ -287,7 +286,7 @@ void pci_init_board(void) fsl_pcie_init_board(first_free_busno); } -int last_stage_init(void) +void configure_rgmii(void) { unsigned short temp; @@ -295,29 +294,77 @@ int last_stage_init(void) /* This is needed to get the RGMII working for the 1.3+ * CDS cards */ if (get_board_version() == 0x13) { - miiphy_write(CONFIG_TSEC1_NAME, + miiphy_write(DEFAULT_MII_NAME, TSEC1_PHY_ADDR, 29, 18); - miiphy_read(CONFIG_TSEC1_NAME, + miiphy_read(DEFAULT_MII_NAME, TSEC1_PHY_ADDR, 30, &temp); temp = (temp & 0xf03f); temp |= 2 << 9; /* 36 ohm */ temp |= 2 << 6; /* 39 ohm */ - miiphy_write(CONFIG_TSEC1_NAME, + miiphy_write(DEFAULT_MII_NAME, TSEC1_PHY_ADDR, 30, temp); - miiphy_write(CONFIG_TSEC1_NAME, + miiphy_write(DEFAULT_MII_NAME, TSEC1_PHY_ADDR, 29, 3); - miiphy_write(CONFIG_TSEC1_NAME, + miiphy_write(DEFAULT_MII_NAME, TSEC1_PHY_ADDR, 30, 0x8000); } - return 0; + return; } +#ifdef CONFIG_TSEC_ENET +int board_eth_init(bd_t *bis) +{ + struct fsl_pq_mdio_info mdio_info; + struct tsec_info_struct tsec_info[4]; + int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + num++; +#endif +#ifdef CONFIG_TSEC2 + SET_STD_TSEC_INFO(tsec_info[num], 2); + num++; +#endif +#ifdef CONFIG_TSEC3 + /* initialize TSEC3 only if Carrier is 1.3 or above on CDS */ + if (get_board_version() >= 0x13) { + SET_STD_TSEC_INFO(tsec_info[num], 3); + tsec_info[num].interface = PHY_INTERFACE_MODE_RGMII_ID; + num++; + } +#endif +#ifdef CONFIG_TSEC4 + /* initialize TSEC4 only if Carrier is 1.3 or above on CDS */ + if (get_board_version() >= 0x13) { + SET_STD_TSEC_INFO(tsec_info[num], 4); + tsec_info[num].interface = PHY_INTERFACE_MODE_RGMII_ID; + num++; + } +#endif + + if (!num) { + printf("No TSECs initialized\n"); + + return 0; + } + + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + fsl_pq_mdio_init(bis, &mdio_info); + + tsec_eth_init(bis, tsec_info, num); + configure_rgmii(); + + return pci_eth_init(bis); +} +#endif #if defined(CONFIG_OF_BOARD_SETUP) void ft_pci_setup(void *blob, bd_t *bd) |