summaryrefslogtreecommitdiff
path: root/board/freescale/ls2080ardb
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale/ls2080ardb')
-rw-r--r--board/freescale/ls2080ardb/Kconfig16
-rw-r--r--board/freescale/ls2080ardb/MAINTAINERS8
-rw-r--r--board/freescale/ls2080ardb/Makefile8
-rw-r--r--board/freescale/ls2080ardb/README120
-rw-r--r--board/freescale/ls2080ardb/ddr.c199
-rw-r--r--board/freescale/ls2080ardb/ddr.h92
-rw-r--r--board/freescale/ls2080ardb/eth_ls2080rdb.c147
-rw-r--r--board/freescale/ls2080ardb/ls2080ardb.c321
-rw-r--r--board/freescale/ls2080ardb/ls2080ardb_qixis.h20
9 files changed, 931 insertions, 0 deletions
diff --git a/board/freescale/ls2080ardb/Kconfig b/board/freescale/ls2080ardb/Kconfig
new file mode 100644
index 0000000000..fe02575cf9
--- /dev/null
+++ b/board/freescale/ls2080ardb/Kconfig
@@ -0,0 +1,16 @@
+
+if TARGET_LS2080ARDB
+
+config SYS_BOARD
+ default "ls2080ardb"
+
+config SYS_VENDOR
+ default "freescale"
+
+config SYS_SOC
+ default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+ default "ls2080ardb"
+
+endif
diff --git a/board/freescale/ls2080ardb/MAINTAINERS b/board/freescale/ls2080ardb/MAINTAINERS
new file mode 100644
index 0000000000..aac81104db
--- /dev/null
+++ b/board/freescale/ls2080ardb/MAINTAINERS
@@ -0,0 +1,8 @@
+LS2080A BOARD
+M: Prabhakar Kushwaha <prabhakar@freescale.com>
+S: Maintained
+F: board/freescale/ls2080ardb/
+F: board/freescale/ls2080a/ls2080ardb.c
+F: include/configs/ls2080ardb.h
+F: configs/ls2080ardb_defconfig
+F: configs/ls2080ardb_nand_defconfig
diff --git a/board/freescale/ls2080ardb/Makefile b/board/freescale/ls2080ardb/Makefile
new file mode 100644
index 0000000000..6a52167be1
--- /dev/null
+++ b/board/freescale/ls2080ardb/Makefile
@@ -0,0 +1,8 @@
+#
+# Copyright 2015 Freescale Semiconductor
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += ls2080ardb.o eth_ls2080rdb.o
+obj-y += ddr.o
diff --git a/board/freescale/ls2080ardb/README b/board/freescale/ls2080ardb/README
new file mode 100644
index 0000000000..7fc2569648
--- /dev/null
+++ b/board/freescale/ls2080ardb/README
@@ -0,0 +1,120 @@
+Overview
+--------
+The LS2080A Reference Design (RDB) is a high-performance computing,
+evaluation, and development platform that supports the QorIQ LS2080A
+Layerscape Architecture processor.
+
+LS2080A SoC Overview
+------------------
+The LS2080A integrated multicore processor combines eight ARM Cortex-A57
+processor cores with high-performance data path acceleration logic and network
+and peripheral bus interfaces required for networking, telecom/datacom,
+wireless infrastructure, and mil/aerospace applications.
+
+The LS2080A SoC includes the following function and features:
+
+ - Eight 64-bit ARM Cortex-A57 CPUs
+ - 1 MB platform cache with ECC
+ - Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support
+ - One secondary 32-bit DDR4 SDRAM memory controller, intended for use by
+ the AIOP
+ - Data path acceleration architecture (DPAA2) incorporating acceleration for
+ the following functions:
+ - Packet parsing, classification, and distribution (WRIOP)
+ - Queue and Hardware buffer management for scheduling, packet sequencing, and
+ congestion management, buffer allocation and de-allocation (QBMan)
+ - Cryptography acceleration (SEC) at up to 10 Gbps
+ - RegEx pattern matching acceleration (PME) at up to 10 Gbps
+ - Decompression/compression acceleration (DCE) at up to 20 Gbps
+ - Accelerated I/O processing (AIOP) at up to 20 Gbps
+ - QDMA engine
+ - 16 SerDes lanes at up to 10.3125 GHz
+ - Ethernet interfaces
+ - Up to eight 10 Gbps Ethernet MACs
+ - Up to eight 1 / 2.5 Gbps Ethernet MACs
+ - High-speed peripheral interfaces
+ - Four PCIe 3.0 controllers, one supporting SR-IOV
+ - Additional peripheral interfaces
+ - Two serial ATA (SATA 3.0) controllers
+ - Two high-speed USB 3.0 controllers with integrated PHY
+ - Enhanced secure digital host controller (eSDXC/eMMC)
+ - Serial peripheral interface (SPI) controller
+ - Quad Serial Peripheral Interface (QSPI) Controller
+ - Four I2C controllers
+ - Two DUARTs
+ - Integrated flash controller (IFC 2.0) supporting NAND and NOR flash
+ - Support for hardware virtualization and partitioning enforcement
+ - QorIQ platform's trust architecture 3.0
+ - Service processor (SP) provides pre-boot initialization and secure-boot
+ capabilities
+
+ LS2080ARDB board Overview
+ -----------------------
+ - SERDES Connections, 16 lanes supporting:
+ - PCI Express - 3.0
+ - SATA 3.0
+ - XFI
+ - DDR Controller
+ - Two ports of 72-bits (8-bits ECC) DDR4. Each port supports four
+ chip-selects and two DIMM connectors. Support is up to 2133MT/s.
+ - One port of 40-bits (8-bits ECC) DDR4 which supports four chip-selects
+ and two DIMM connectors. Support is up to 1600MT/s.
+ -IFC/Local Bus
+ - IFC rev. 2.0 implementation supporting Little Endian connection scheme.
+ - 128 MB NOR flash 16-bit data bus
+ - One 2 GB NAND flash with ECC support
+ - CPLD connection
+ - USB 3.0
+ - Two high speed USB 3.0 ports
+ - First USB 3.0 port configured as Host with Type-A connector
+ - Second USB 3.0 port configured as OTG with micro-AB connector
+ - SDHC adapter
+ - SD Card Rev 2.0 and Rev 3.0
+ - DSPI
+ - 128 MB high-speed flash Memory for boot code and storage (up to 108MHz)
+ - 4 I2C controllers
+ - Two SATA onboard connectors
+ - UART
+ - ARM JTAG support
+
+Memory map from core's view
+----------------------------
+0x00_0000_0000 .. 0x00_000F_FFFF Boot Rom
+0x00_0100_0000 .. 0x00_0FFF_FFFF CCSR
+0x00_1800_0000 .. 0x00_181F_FFFF OCRAM
+0x00_3000_0000 .. 0x00_3FFF_FFFF IFC region #1
+0x00_8000_0000 .. 0x00_FFFF_FFFF DDR region #1
+0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2
+0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2
+
+Other addresses are either reserved, or not used directly by u-boot.
+This list should be updated when more addresses are used.
+
+IFC region map from core's view
+-------------------------------
+During boot i.e. IFC Region #1:-
+ 0x30000000 - 0x37ffffff : 128MB : NOR flash
+ 0x3C000000 - 0x40000000 : 64MB : CPLD
+
+After relocate to DDR i.e. IFC Region #2:-
+ 0x5_1000_0000..0x5_1fff_ffff Memory Hole
+ 0x5_2000_0000..0x5_3fff_ffff IFC CSx (CPLD, NAND and others 512MB)
+ 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB
+ 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet)
+ 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet)
+
+Booting Options
+---------------
+a) NOR boot
+b) NAND boot
+
+Booting Linux flavors which do not support 48-bit VA (< Linux 3.18)
+-------------------------------------------------------------------
+One needs to use appropriate bootargs to boot Linux flavors which do
+not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown
+below:
+
+=> setenv bootargs 'console=ttyS1,115200 root=/dev/ram
+ earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m
+ hugepages=16 mem=2048M'
+
diff --git a/board/freescale/ls2080ardb/ddr.c b/board/freescale/ls2080ardb/ddr.c
new file mode 100644
index 0000000000..ae681de35e
--- /dev/null
+++ b/board/freescale/ls2080ardb/ddr.c
@@ -0,0 +1,199 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+#include "ddr.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num)
+{
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
+ u8 dq_mapping_0, dq_mapping_2, dq_mapping_3;
+#endif
+ const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+ ulong ddr_freq;
+ int slot;
+
+ if (ctrl_num > 2) {
+ printf("Not supported controller number %d\n", ctrl_num);
+ return;
+ }
+
+ for (slot = 0; slot < CONFIG_DIMM_SLOTS_PER_CTLR; slot++) {
+ if (pdimm[slot].n_ranks)
+ break;
+ }
+
+ if (slot >= CONFIG_DIMM_SLOTS_PER_CTLR)
+ return;
+
+ /*
+ * we use identical timing for all slots. If needed, change the code
+ * to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num];
+ */
+ if (popts->registered_dimm_en)
+ pbsp = rdimms[ctrl_num];
+ else
+ pbsp = udimms[ctrl_num];
+
+
+ /* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr
+ * freqency and n_banks specified in board_specific_parameters table.
+ */
+ ddr_freq = get_ddr_freq(ctrl_num) / 1000000;
+ while (pbsp->datarate_mhz_high) {
+ if (pbsp->n_ranks == pdimm[slot].n_ranks &&
+ (pdimm[slot].rank_density >> 30) >= pbsp->rank_gb) {
+ if (ddr_freq <= pbsp->datarate_mhz_high) {
+ popts->clk_adjust = pbsp->clk_adjust;
+ popts->wrlvl_start = pbsp->wrlvl_start;
+ popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+ popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+ goto found;
+ }
+ pbsp_highest = pbsp;
+ }
+ pbsp++;
+ }
+
+ if (pbsp_highest) {
+ printf("Error: board specific timing not found for data rate %lu MT/s\n"
+ "Trying to use the highest speed (%u) parameters\n",
+ ddr_freq, pbsp_highest->datarate_mhz_high);
+ popts->clk_adjust = pbsp_highest->clk_adjust;
+ popts->wrlvl_start = pbsp_highest->wrlvl_start;
+ popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+ popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+ } else {
+ panic("DIMM is not supported by this board");
+ }
+found:
+ debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
+ "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, wrlvl_ctrl_3 0x%x\n",
+ pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
+ pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
+ pbsp->wrlvl_ctl_3);
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
+ if (ctrl_num == CONFIG_DP_DDR_CTRL) {
+ /* force DDR bus width to 32 bits */
+ popts->data_bus_width = 1;
+ popts->otf_burst_chop_en = 0;
+ popts->burst_length = DDR_BL8;
+ popts->bstopre = 0; /* enable auto precharge */
+ /*
+ * Layout optimization results byte mapping
+ * Byte 0 -> Byte ECC
+ * Byte 1 -> Byte 3
+ * Byte 2 -> Byte 2
+ * Byte 3 -> Byte 1
+ * Byte ECC -> Byte 0
+ */
+ dq_mapping_0 = pdimm[slot].dq_mapping[0];
+ dq_mapping_2 = pdimm[slot].dq_mapping[2];
+ dq_mapping_3 = pdimm[slot].dq_mapping[3];
+ pdimm[slot].dq_mapping[0] = pdimm[slot].dq_mapping[8];
+ pdimm[slot].dq_mapping[1] = pdimm[slot].dq_mapping[9];
+ pdimm[slot].dq_mapping[2] = pdimm[slot].dq_mapping[6];
+ pdimm[slot].dq_mapping[3] = pdimm[slot].dq_mapping[7];
+ pdimm[slot].dq_mapping[6] = dq_mapping_2;
+ pdimm[slot].dq_mapping[7] = dq_mapping_3;
+ pdimm[slot].dq_mapping[8] = dq_mapping_0;
+ pdimm[slot].dq_mapping[9] = 0;
+ pdimm[slot].dq_mapping[10] = 0;
+ pdimm[slot].dq_mapping[11] = 0;
+ pdimm[slot].dq_mapping[12] = 0;
+ pdimm[slot].dq_mapping[13] = 0;
+ pdimm[slot].dq_mapping[14] = 0;
+ pdimm[slot].dq_mapping[15] = 0;
+ pdimm[slot].dq_mapping[16] = 0;
+ pdimm[slot].dq_mapping[17] = 0;
+ }
+#endif
+ /* To work at higher than 1333MT/s */
+ popts->half_strength_driver_enable = 0;
+ /*
+ * Write leveling override
+ */
+ popts->wrlvl_override = 1;
+ popts->wrlvl_sample = 0x0; /* 32 clocks */
+
+ /*
+ * Rtt and Rtt_WR override
+ */
+ popts->rtt_override = 0;
+
+ /* Enable ZQ calibration */
+ popts->zq_en = 1;
+
+ if (ddr_freq < 2350) {
+ popts->ddr_cdr1 = DDR_CDR1_DHC_EN |
+ DDR_CDR1_ODT(DDR_CDR_ODT_60ohm);
+ popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) |
+ DDR_CDR2_VREF_RANGE_2;
+ } else {
+ popts->ddr_cdr1 = DDR_CDR1_DHC_EN |
+ DDR_CDR1_ODT(DDR_CDR_ODT_100ohm);
+ popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_100ohm) |
+ DDR_CDR2_VREF_RANGE_2;
+ }
+}
+
+phys_size_t initdram(int board_type)
+{
+ phys_size_t dram_size;
+
+#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
+ return fsl_ddr_sdram_size();
+#else
+ puts("Initializing DDR....using SPD\n");
+
+ dram_size = fsl_ddr_sdram();
+#endif
+
+ return dram_size;
+}
+
+void dram_init_banksize(void)
+{
+#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
+ phys_size_t dp_ddr_size;
+#endif
+
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) {
+ gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
+ gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
+ gd->bd->bi_dram[1].size = gd->ram_size -
+ CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
+ } else {
+ gd->bd->bi_dram[0].size = gd->ram_size;
+ }
+
+#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
+ /* initialize DP-DDR here */
+ puts("DP-DDR: ");
+ /*
+ * DDR controller use 0 as the base address for binding.
+ * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
+ */
+ dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
+ CONFIG_DP_DDR_CTRL,
+ CONFIG_DP_DDR_NUM_CTRLS,
+ CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
+ NULL, NULL, NULL);
+ if (dp_ddr_size) {
+ gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
+ gd->bd->bi_dram[2].size = dp_ddr_size;
+ } else {
+ puts("Not detected");
+ }
+#endif
+}
diff --git a/board/freescale/ls2080ardb/ddr.h b/board/freescale/ls2080ardb/ddr.h
new file mode 100644
index 0000000000..bda9d4a40f
--- /dev/null
+++ b/board/freescale/ls2080ardb/ddr.h
@@ -0,0 +1,92 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __DDR_H__
+#define __DDR_H__
+struct board_specific_parameters {
+ u32 n_ranks;
+ u32 datarate_mhz_high;
+ u32 rank_gb;
+ u32 clk_adjust;
+ u32 wrlvl_start;
+ u32 wrlvl_ctl_2;
+ u32 wrlvl_ctl_3;
+};
+
+/*
+ * These tables contain all valid speeds we want to override with board
+ * specific parameters. datarate_mhz_high values need to be in ascending order
+ * for each n_ranks group.
+ */
+
+static const struct board_specific_parameters udimm0[] = {
+ /*
+ * memory controller 0
+ * num| hi| rank| clk| wrlvl | wrlvl | wrlvl
+ * ranks| mhz| GB |adjst| start | ctl2 | ctl3
+ */
+ {2, 1350, 0, 4, 6, 0x0708090B, 0x0C0D0E09,},
+ {2, 1666, 0, 4, 8, 0x08090B0D, 0x0E10100C,},
+ {2, 1900, 0, 4, 8, 0x090A0C0E, 0x1012120D,},
+ {2, 2300, 0, 4, 9, 0x0A0B0C10, 0x1114140E,},
+ {}
+};
+
+/* DP-DDR DIMM */
+static const struct board_specific_parameters udimm2[] = {
+ /*
+ * memory controller 2
+ * num| hi| rank| clk| wrlvl | wrlvl | wrlvl
+ * ranks| mhz| GB |adjst| start | ctl2 | ctl3
+ */
+ {2, 1350, 0, 4, 0xd, 0x0C0A0A00, 0x00000009,},
+ {2, 1666, 0, 4, 0xd, 0x0C0A0A00, 0x00000009,},
+ {2, 1900, 0, 4, 0xe, 0x0D0C0B00, 0x0000000A,},
+ {2, 2200, 0, 4, 0xe, 0x0D0C0B00, 0x0000000A,},
+ {}
+};
+
+static const struct board_specific_parameters rdimm0[] = {
+ /*
+ * memory controller 0
+ * num| hi| rank| clk| wrlvl | wrlvl | wrlvl
+ * ranks| mhz| GB |adjst| start | ctl2 | ctl3
+ */
+ {2, 1350, 0, 4, 6, 0x0708090B, 0x0C0D0E09,},
+ {2, 1666, 0, 4, 7, 0x08090A0C, 0x0D0F100B,},
+ {2, 1900, 0, 4, 7, 0x09090B0D, 0x0E10120B,},
+ {2, 2200, 0, 4, 8, 0x090A0C0F, 0x1012130C,},
+ {}
+};
+
+/* DP-DDR DIMM */
+static const struct board_specific_parameters rdimm2[] = {
+ /*
+ * memory controller 2
+ * num| hi| rank| clk| wrlvl | wrlvl | wrlvl
+ * ranks| mhz| GB |adjst| start | ctl2 | ctl3
+ */
+ {2, 1350, 0, 4, 6, 0x0708090B, 0x0C0D0E09,},
+ {2, 1666, 0, 4, 7, 0x0B0A090C, 0x0D0F100B,},
+ {2, 1900, 0, 4, 7, 0x09090B0D, 0x0E10120B,},
+ {2, 2200, 0, 4, 8, 0x090A0C0F, 0x1012130C,},
+ {}
+};
+
+static const struct board_specific_parameters *udimms[] = {
+ udimm0,
+ udimm0,
+ udimm2,
+};
+
+static const struct board_specific_parameters *rdimms[] = {
+ rdimm0,
+ rdimm0,
+ rdimm2,
+};
+
+
+#endif
diff --git a/board/freescale/ls2080ardb/eth_ls2080rdb.c b/board/freescale/ls2080ardb/eth_ls2080rdb.c
new file mode 100644
index 0000000000..db50e4efa9
--- /dev/null
+++ b/board/freescale/ls2080ardb/eth_ls2080rdb.c
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <malloc.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <exports.h>
+#include <asm/arch/fsl_serdes.h>
+#include <fsl-mc/ldpaa_wriop.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int load_firmware_cortina(struct phy_device *phy_dev)
+{
+ if (phy_dev->drv->config)
+ return phy_dev->drv->config(phy_dev);
+
+ return 0;
+}
+
+void load_phy_firmware(void)
+{
+ int i;
+ u8 phy_addr;
+ struct phy_device *phy_dev;
+ struct mii_dev *dev;
+ phy_interface_t interface;
+
+ /*Initialize and upload firmware for all the PHYs*/
+ for (i = WRIOP1_DPMAC1; i <= WRIOP1_DPMAC8; i++) {
+ interface = wriop_get_enet_if(i);
+ if (interface == PHY_INTERFACE_MODE_XGMII) {
+ dev = wriop_get_mdio(i);
+ phy_addr = wriop_get_phy_address(i);
+ phy_dev = phy_find_by_mask(dev, 1 << phy_addr,
+ interface);
+ if (!phy_dev) {
+ printf("No phydev for phyaddr %d\n", phy_addr);
+ continue;
+ }
+
+ /*Flash firmware for All CS4340 PHYS */
+ if (phy_dev->phy_id == PHY_UID_CS4340)
+ load_firmware_cortina(phy_dev);
+ }
+ }
+}
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_FSL_MC_ENET)
+ int i, interface;
+ struct memac_mdio_info mdio_info;
+ struct mii_dev *dev;
+ struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 srds_s1;
+ struct memac_mdio_controller *reg;
+
+ srds_s1 = in_le32(&gur->rcwsr[28]) &
+ FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK;
+ srds_s1 >>= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
+
+ reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO1;
+ mdio_info.regs = reg;
+ mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME;
+
+ /* Register the EMI 1 */
+ fm_memac_mdio_init(bis, &mdio_info);
+
+ reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO2;
+ mdio_info.regs = reg;
+ mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME;
+
+ /* Register the EMI 2 */
+ fm_memac_mdio_init(bis, &mdio_info);
+
+ switch (srds_s1) {
+ case 0x2A:
+ wriop_set_phy_address(WRIOP1_DPMAC1, CORTINA_PHY_ADDR1);
+ wriop_set_phy_address(WRIOP1_DPMAC2, CORTINA_PHY_ADDR2);
+ wriop_set_phy_address(WRIOP1_DPMAC3, CORTINA_PHY_ADDR3);
+ wriop_set_phy_address(WRIOP1_DPMAC4, CORTINA_PHY_ADDR4);
+ wriop_set_phy_address(WRIOP1_DPMAC5, AQ_PHY_ADDR1);
+ wriop_set_phy_address(WRIOP1_DPMAC6, AQ_PHY_ADDR2);
+ wriop_set_phy_address(WRIOP1_DPMAC7, AQ_PHY_ADDR3);
+ wriop_set_phy_address(WRIOP1_DPMAC8, AQ_PHY_ADDR4);
+
+ break;
+ default:
+ printf("SerDes1 protocol 0x%x is not supported on LS2080aRDB\n",
+ srds_s1);
+ break;
+ }
+
+ for (i = WRIOP1_DPMAC1; i <= WRIOP1_DPMAC4; i++) {
+ interface = wriop_get_enet_if(i);
+ switch (interface) {
+ case PHY_INTERFACE_MODE_XGMII:
+ dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME);
+ wriop_set_mdio(i, dev);
+ break;
+ default:
+ break;
+ }
+ }
+
+ for (i = WRIOP1_DPMAC5; i <= WRIOP1_DPMAC8; i++) {
+ switch (wriop_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_XGMII:
+ dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME);
+ wriop_set_mdio(i, dev);
+ break;
+ default:
+ break;
+ }
+ }
+
+ /* Load CORTINA CS4340 PHY firmware */
+ load_phy_firmware();
+
+ cpu_eth_init(bis);
+#endif /* CONFIG_FMAN_ENET */
+
+#ifdef CONFIG_PHY_AQUANTIA
+ /*
+ * Export functions to be used by AQ firmware
+ * upload application
+ */
+ gd->jt->strcpy = strcpy;
+ gd->jt->mdelay = mdelay;
+ gd->jt->mdio_get_current_dev = mdio_get_current_dev;
+ gd->jt->phy_find_by_mask = phy_find_by_mask;
+ gd->jt->mdio_phydev_for_ethname = mdio_phydev_for_ethname;
+ gd->jt->miiphy_set_current_dev = miiphy_set_current_dev;
+#endif
+ return pci_eth_init(bis);
+}
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
new file mode 100644
index 0000000000..2ae9d6cf45
--- /dev/null
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -0,0 +1,321 @@
+/*
+ * Copyright 2015 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <netdev.h>
+#include <fsl_ifc.h>
+#include <fsl_ddr.h>
+#include <asm/io.h>
+#include <hwconfig.h>
+#include <fdt_support.h>
+#include <libfdt.h>
+#include <fsl_debug_server.h>
+#include <fsl-mc/fsl_mc.h>
+#include <environment.h>
+#include <i2c.h>
+#include <asm/arch/soc.h>
+
+#include "../common/qixis.h"
+#include "ls2080ardb_qixis.h"
+
+#define PIN_MUX_SEL_SDHC 0x00
+#define PIN_MUX_SEL_DSPI 0x0a
+
+#define SET_SDHC_MUX_SEL(reg, value) ((reg & 0xf0) | value)
+DECLARE_GLOBAL_DATA_PTR;
+
+enum {
+ MUX_TYPE_SDHC,
+ MUX_TYPE_DSPI,
+};
+
+unsigned long long get_qixis_addr(void)
+{
+ unsigned long long addr;
+
+ if (gd->flags & GD_FLG_RELOC)
+ addr = QIXIS_BASE_PHYS;
+ else
+ addr = QIXIS_BASE_PHYS_EARLY;
+
+ /*
+ * IFC address under 256MB is mapped to 0x30000000, any address above
+ * is mapped to 0x5_10000000 up to 4GB.
+ */
+ addr = addr > 0x10000000 ? addr + 0x500000000ULL : addr + 0x30000000;
+
+ return addr;
+}
+
+int checkboard(void)
+{
+ u8 sw;
+ char buf[15];
+
+ cpu_name(buf);
+ printf("Board: %s-RDB, ", buf);
+
+ sw = QIXIS_READ(arch);
+ printf("Board Arch: V%d, ", sw >> 4);
+ printf("Board version: %c, boot from ", (sw & 0xf) + 'A');
+
+ sw = QIXIS_READ(brdcfg[0]);
+ sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+ if (sw < 0x8)
+ printf("vBank: %d\n", sw);
+ else if (sw == 0x9)
+ puts("NAND\n");
+ else
+ printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+
+ printf("FPGA: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata));
+
+ puts("SERDES1 Reference : ");
+ printf("Clock1 = 156.25MHz ");
+ printf("Clock2 = 156.25MHz");
+
+ puts("\nSERDES2 Reference : ");
+ printf("Clock1 = 100MHz ");
+ printf("Clock2 = 100MHz\n");
+
+ return 0;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+ u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+
+ switch (sysclk_conf & 0x0F) {
+ case QIXIS_SYSCLK_83:
+ return 83333333;
+ case QIXIS_SYSCLK_100:
+ return 100000000;
+ case QIXIS_SYSCLK_125:
+ return 125000000;
+ case QIXIS_SYSCLK_133:
+ return 133333333;
+ case QIXIS_SYSCLK_150:
+ return 150000000;
+ case QIXIS_SYSCLK_160:
+ return 160000000;
+ case QIXIS_SYSCLK_166:
+ return 166666666;
+ }
+ return 66666666;
+}
+
+int select_i2c_ch_pca9547(u8 ch)
+{
+ int ret;
+
+ ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+ if (ret) {
+ puts("PCA: failed to select proper channel\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+int config_board_mux(int ctrl_type)
+{
+ u8 reg5;
+
+ reg5 = QIXIS_READ(brdcfg[5]);
+
+ switch (ctrl_type) {
+ case MUX_TYPE_SDHC:
+ reg5 = SET_SDHC_MUX_SEL(reg5, PIN_MUX_SEL_SDHC);
+ break;
+ case MUX_TYPE_DSPI:
+ reg5 = SET_SDHC_MUX_SEL(reg5, PIN_MUX_SEL_DSPI);
+ break;
+ default:
+ printf("Wrong mux interface type\n");
+ return -1;
+ }
+
+ QIXIS_WRITE(brdcfg[5], reg5);
+
+ return 0;
+}
+
+int board_init(void)
+{
+ char *env_hwconfig;
+ u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
+ u32 val;
+
+ init_final_memctl_regs();
+
+ val = in_le32(dcfg_ccsr + DCFG_RCWSR13 / 4);
+
+ env_hwconfig = getenv("hwconfig");
+
+ if (hwconfig_f("dspi", env_hwconfig) &&
+ DCFG_RCWSR13_DSPI == (val & (u32)(0xf << 8)))
+ config_board_mux(MUX_TYPE_DSPI);
+ else
+ config_board_mux(MUX_TYPE_SDHC);
+
+#ifdef CONFIG_ENV_IS_NOWHERE
+ gd->env_addr = (ulong)&default_environment[0];
+#endif
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+
+ QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET_EN);
+
+ return 0;
+}
+
+int board_early_init_f(void)
+{
+ fsl_lsch3_early_init_f();
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ if (hwconfig("sdhc"))
+ config_board_mux(MUX_TYPE_SDHC);
+
+ return 0;
+}
+
+void detail_board_ddr_info(void)
+{
+ puts("\nDDR ");
+ print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
+ print_ddr_info(0);
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
+ if (gd->bd->bi_dram[2].size) {
+ puts("\nDP-DDR ");
+ print_size(gd->bd->bi_dram[2].size, "");
+ print_ddr_info(CONFIG_DP_DDR_CTRL);
+ }
+#endif
+}
+
+int dram_init(void)
+{
+ gd->ram_size = initdram(0);
+
+ return 0;
+}
+
+#if defined(CONFIG_ARCH_MISC_INIT)
+int arch_misc_init(void)
+{
+#ifdef CONFIG_FSL_DEBUG_SERVER
+ debug_server_init();
+#endif
+
+ return 0;
+}
+#endif
+
+unsigned long get_dram_size_to_hide(void)
+{
+ unsigned long dram_to_hide = 0;
+
+/* Carve the Debug Server private DRAM block from the end of DRAM */
+#ifdef CONFIG_FSL_DEBUG_SERVER
+ dram_to_hide += debug_server_get_dram_block_size();
+#endif
+
+/* Carve the MC private DRAM block from the end of DRAM */
+#ifdef CONFIG_FSL_MC_ENET
+ dram_to_hide += mc_get_dram_block_size();
+#endif
+
+ return roundup(dram_to_hide, CONFIG_SYS_MEM_TOP_HIDE_MIN);
+}
+
+#ifdef CONFIG_FSL_MC_ENET
+void fdt_fixup_board_enet(void *fdt)
+{
+ int offset;
+
+ offset = fdt_path_offset(fdt, "/fsl-mc");
+
+ if (offset < 0)
+ offset = fdt_path_offset(fdt, "/fsl,dprc@0");
+
+ if (offset < 0) {
+ printf("%s: ERROR: fsl-mc node not found in device tree (error %d)\n",
+ __func__, offset);
+ return;
+ }
+
+ if (get_mc_boot_status() == 0)
+ fdt_status_okay(fdt, offset);
+ else
+ fdt_status_fail(fdt, offset);
+}
+#endif
+
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ int err;
+ u64 base[CONFIG_NR_DRAM_BANKS];
+ u64 size[CONFIG_NR_DRAM_BANKS];
+
+ ft_cpu_setup(blob, bd);
+
+ /* fixup DT for the two GPP DDR banks */
+ base[0] = gd->bd->bi_dram[0].start;
+ size[0] = gd->bd->bi_dram[0].size;
+ base[1] = gd->bd->bi_dram[1].start;
+ size[1] = gd->bd->bi_dram[1].size;
+
+ fdt_fixup_memory_banks(blob, base, size, 2);
+
+#ifdef CONFIG_FSL_MC_ENET
+ fdt_fixup_board_enet(blob);
+ err = fsl_mc_ldpaa_exit(bd);
+ if (err)
+ return err;
+#endif
+
+ return 0;
+}
+#endif
+
+void qixis_dump_switch(void)
+{
+ int i, nr_of_cfgsw;
+
+ QIXIS_WRITE(cms[0], 0x00);
+ nr_of_cfgsw = QIXIS_READ(cms[1]);
+
+ puts("DIP switch settings dump:\n");
+ for (i = 1; i <= nr_of_cfgsw; i++) {
+ QIXIS_WRITE(cms[0], i);
+ printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
+ }
+}
+
+/*
+ * Board rev C and earlier has duplicated I2C addresses for 2nd controller.
+ * Both slots has 0x54, resulting 2nd slot unusable.
+ */
+void update_spd_address(unsigned int ctrl_num,
+ unsigned int slot,
+ unsigned int *addr)
+{
+ u8 sw;
+
+ sw = QIXIS_READ(arch);
+ if ((sw & 0xf) < 0x3) {
+ if (ctrl_num == 1 && slot == 0)
+ *addr = SPD_EEPROM_ADDRESS4;
+ else if (ctrl_num == 1 && slot == 1)
+ *addr = SPD_EEPROM_ADDRESS3;
+ }
+}
diff --git a/board/freescale/ls2080ardb/ls2080ardb_qixis.h b/board/freescale/ls2080ardb/ls2080ardb_qixis.h
new file mode 100644
index 0000000000..cb60c00c6c
--- /dev/null
+++ b/board/freescale/ls2080ardb/ls2080ardb_qixis.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LS2_RDB_QIXIS_H__
+#define __LS2_RDB_QIXIS_H__
+
+/* SYSCLK */
+#define QIXIS_SYSCLK_66 0x0
+#define QIXIS_SYSCLK_83 0x1
+#define QIXIS_SYSCLK_100 0x2
+#define QIXIS_SYSCLK_125 0x3
+#define QIXIS_SYSCLK_133 0x4
+#define QIXIS_SYSCLK_150 0x5
+#define QIXIS_SYSCLK_160 0x6
+#define QIXIS_SYSCLK_166 0x7
+
+#endif /*__LS2_RDB_QIXIS_H__*/