diff options
Diffstat (limited to 'board/freescale/common/sys_eeprom.c')
| -rw-r--r-- | board/freescale/common/sys_eeprom.c | 84 |
1 files changed, 80 insertions, 4 deletions
diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c index 510d7c266bb..bb655ca7447 100644 --- a/board/freescale/common/sys_eeprom.c +++ b/board/freescale/common/sys_eeprom.c @@ -149,23 +149,42 @@ static int read_eeprom(void) { int ret; #ifdef CONFIG_SYS_EEPROM_BUS_NUM +#ifndef CONFIG_DM_I2C unsigned int bus; #endif +#endif if (has_been_read) return 0; #ifdef CONFIG_SYS_EEPROM_BUS_NUM +#ifndef CONFIG_DM_I2C bus = i2c_get_bus_num(); i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM); #endif +#endif - ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, - (void *)&e, sizeof(e)); +#ifndef CONFIG_DM_I2C + ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, + CONFIG_SYS_I2C_EEPROM_ADDR_LEN, + (void *)&e, sizeof(e)); +#else + struct udevice *dev; +#ifdef CONFIG_SYS_EEPROM_BUS_NUM + ret = i2c_get_chip_for_busnum(CONFIG_SYS_EEPROM_BUS_NUM, + CONFIG_SYS_I2C_EEPROM_ADDR, 1, &dev); +#else + ret = i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_EEPROM_ADDR, 1, &dev); +#endif + if (!ret) + ret = dm_i2c_read(dev, 0, (void *)&e, sizeof(e)); +#endif #ifdef CONFIG_SYS_EEPROM_BUS_NUM +#ifndef CONFIG_DM_I2C i2c_set_bus_num(bus); #endif +#endif #ifdef DEBUG show_eeprom(); @@ -199,8 +218,10 @@ static int prog_eeprom(void) int i; void *p; #ifdef CONFIG_SYS_EEPROM_BUS_NUM +#ifndef CONFIG_DM_I2C unsigned int bus; #endif +#endif /* Set the reserved values to 0xFF */ #ifdef CONFIG_SYS_I2C_EEPROM_NXID @@ -211,10 +232,12 @@ static int prog_eeprom(void) #endif update_crc(); +#ifndef CONFIG_DM_I2C #ifdef CONFIG_SYS_EEPROM_BUS_NUM bus = i2c_get_bus_num(); i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM); #endif +#endif /* * The AT24C02 datasheet says that data can only be written in page @@ -222,8 +245,26 @@ static int prog_eeprom(void) * complete a given write. */ for (i = 0, p = &e; i < sizeof(e); i += 8, p += 8) { - ret = i2c_write(CONFIG_SYS_I2C_EEPROM_ADDR, i, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, +#ifndef CONFIG_DM_I2C + ret = i2c_write(CONFIG_SYS_I2C_EEPROM_ADDR, i, + CONFIG_SYS_I2C_EEPROM_ADDR_LEN, p, min((int)(sizeof(e) - i), 8)); +#else + struct udevice *dev; +#ifdef CONFIG_SYS_EEPROM_BUS_NUM + ret = i2c_get_chip_for_busnum(CONFIG_SYS_EEPROM_BUS_NUM, + CONFIG_SYS_I2C_EEPROM_ADDR, + CONFIG_SYS_I2C_EEPROM_ADDR_LEN, + &dev); +#else + ret = i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_EEPROM_ADDR, + CONFIG_SYS_I2C_EEPROM_ADDR_LEN, + &dev); +#endif + if (!ret) + ret = dm_i2c_write(dev, i, p, min((int)(sizeof(e) - i), + 8)); +#endif if (ret) break; udelay(5000); /* 5ms write cycle timing */ @@ -233,15 +274,34 @@ static int prog_eeprom(void) /* Verify the write by reading back the EEPROM and comparing */ struct eeprom e2; +#ifndef CONFIG_DM_I2C ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (void *)&e2, sizeof(e2)); + CONFIG_SYS_I2C_EEPROM_ADDR_LEN, + (void *)&e2, sizeof(e2)); +#else + struct udevice *dev; +#ifdef CONFIG_SYS_EEPROM_BUS_NUM + ret = i2c_get_chip_for_busnum(CONFIG_SYS_EEPROM_BUS_NUM, + CONFIG_SYS_I2C_EEPROM_ADDR, + CONFIG_SYS_I2C_EEPROM_ADDR_LEN, + &dev); +#else + ret = i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_EEPROM_ADDR, + CONFIG_SYS_I2C_EEPROM_ADDR_LEN, + &dev); +#endif + if (!ret) + ret = dm_i2c_read(dev, 0, (void *)&e2, sizeof(e2)); +#endif if (!ret && memcmp(&e, &e2, sizeof(e))) ret = -1; } +#ifndef CONFIG_DM_I2C #ifdef CONFIG_SYS_EEPROM_BUS_NUM i2c_set_bus_num(bus); #endif +#endif if (ret) { printf("Programming failed.\n"); @@ -529,8 +589,24 @@ unsigned int get_cpu_board_revision(void) u8 minor; /* 0x05 Board revision, minor */ } be; +#ifndef CONFIG_DM_I2C i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (void *)&be, sizeof(be)); +#else + struct udevice *dev; +#ifdef CONFIG_SYS_EEPROM_BUS_NUM + ret = i2c_get_chip_for_busnum(CONFIG_SYS_EEPROM_BUS_NUM, + CONFIG_SYS_I2C_EEPROM_ADDR, + CONFIG_SYS_I2C_EEPROM_ADDR_LEN, + &dev); +#else + ret = i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_EEPROM_ADDR, + CONFIG_SYS_I2C_EEPROM_ADDR_LEN, + &dev) +#endif + if (!ret) + dm_i2c_read(dev, 0, (void *)&be, sizeof(be)); +#endif if (be.id != (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D')) return MPC85XX_CPU_BOARD_REV(0, 0); |