summaryrefslogtreecommitdiff
path: root/board/esd/pmc440/pmc440.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/esd/pmc440/pmc440.c')
-rw-r--r--board/esd/pmc440/pmc440.c165
1 files changed, 101 insertions, 64 deletions
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
index e86996c55f..062ae67276 100644
--- a/board/esd/pmc440/pmc440.c
+++ b/board/esd/pmc440/pmc440.c
@@ -12,7 +12,6 @@
*
* SPDX-License-Identifier: GPL-2.0+
*/
-
#include <common.h>
#include <libfdt.h>
#include <fdt_support.h>
@@ -34,14 +33,14 @@
DECLARE_GLOBAL_DATA_PTR;
-extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
extern void __ft_board_setup(void *blob, bd_t *bd);
ulong flash_get_size(ulong base, int banknum);
-int pci_is_66mhz(void);
+static int pci_is_66mhz(void);
int is_monarch(void);
-int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset,
- uchar *buffer, unsigned cnt);
+static int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset,
+ uchar *buffer, unsigned cnt);
struct serial_device *default_serial_console(void)
{
@@ -58,23 +57,24 @@ struct serial_device *default_serial_console(void)
if (((val & 0xf0000000) >> 29) != 7)
return &eserial2_device;
- ulong scratchreg = in_be32((void*)GPIO0_ISR3L);
+ ulong scratchreg = in_be32((void *)GPIO0_ISR3L);
if (!(scratchreg & 0x80)) {
/* mark scratchreg valid */
scratchreg = (scratchreg & 0xffffff00) | 0x80;
+ i2c_init_all();
+
i = bootstrap_eeprom_read(CONFIG_SYS_I2C_BOOT_EEPROM_ADDR,
0x10, buf, 4);
if ((i != -1) && (buf[0] == 0x19) && (buf[1] == 0x75)) {
scratchreg |= buf[2];
/* bringup delay for console */
- for (delay=0; delay<(1000 * (ulong)buf[3]); delay++) {
+ for (delay = 0; delay < (1000 * (ulong)buf[3]); delay++)
udelay(1000);
- }
} else
scratchreg |= 0x01;
- out_be32((void*)GPIO0_ISR3L, scratchreg);
+ out_be32((void *)GPIO0_ISR3L, scratchreg);
}
if (scratchreg & 0x01)
@@ -93,10 +93,7 @@ int board_early_init_f(void)
mtdcr(EBC0_CFGADDR, EBC0_CFG);
mtdcr(EBC0_CFGDATA, 0xf8400000);
- /*
- * Setup the GPIO pins
- * TODO: setup GPIOs via CONFIG_SYS_4xx_GPIO_TABLE in board's config file
- */
+ /* Setup the GPIO pins */
out_be32((void *)GPIO0_OR, 0x40000102);
out_be32((void *)GPIO0_TCR, 0x4c90011f);
out_be32((void *)GPIO0_OSRL, 0x28051400);
@@ -259,7 +256,7 @@ int misc_init_r(void)
* USB suff...
*/
if ((act == NULL || strcmp(act, "host") == 0) &&
- !(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)){
+ !(in_be32((void *)GPIO0_IR) & GPIO0_USB_PRSNT)) {
/* SDR Setting */
mfsdr(SDR0_PFC1, sdr0_pfc1);
mfsdr(SDR0_USB2D0CR, usb2d0cr);
@@ -326,16 +323,16 @@ int misc_init_r(void)
mtsdr(SDR0_SRST1, 0x00000000);
mtsdr(SDR0_SRST0, 0x00000000);
- if (!(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) {
+ if (!(in_be32((void *)GPIO0_IR) & GPIO0_USB_PRSNT)) {
/* enable power on USB socket */
- out_be32((void*)GPIO1_OR,
- in_be32((void*)GPIO1_OR) & ~GPIO1_USB_PWR_N);
+ out_be32((void *)GPIO1_OR,
+ in_be32((void *)GPIO1_OR) & ~GPIO1_USB_PWR_N);
}
printf("USB: Host\n");
} else if ((strcmp(act, "dev") == 0) ||
- (in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) {
+ (in_be32((void *)GPIO0_IR) & GPIO0_USB_PRSNT)) {
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
@@ -414,30 +411,31 @@ int misc_init_r(void)
#endif
/* turn off POST LED */
- out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_POST_N);
+ out_be32((void *)GPIO1_OR, in_be32((void *)GPIO1_OR) & ~GPIO1_POST_N);
/* turn on RUN LED */
- out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~GPIO0_LED_RUN_N);
+ out_be32((void *)GPIO0_OR,
+ in_be32((void *)GPIO0_OR) & ~GPIO0_LED_RUN_N);
return 0;
}
int is_monarch(void)
{
- if (in_be32((void*)GPIO1_IR) & GPIO1_NONMONARCH)
+ if (in_be32((void *)GPIO1_IR) & GPIO1_NONMONARCH)
return 0;
return 1;
}
-int pci_is_66mhz(void)
+static int pci_is_66mhz(void)
{
- if (in_be32((void*)GPIO1_IR) & GPIO1_M66EN)
+ if (in_be32((void *)GPIO1_IR) & GPIO1_M66EN)
return 1;
return 0;
}
-int board_revision(void)
+static int board_revision(void)
{
- return (int)((in_be32((void*)GPIO1_IR) & GPIO1_HWID_MASK) >> 4);
+ return (int)((in_be32((void *)GPIO1_IR) & GPIO1_HWID_MASK) >> 4);
}
int checkboard(void)
@@ -495,7 +493,7 @@ void pci_target_init(struct pci_controller *hose)
out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */
/* - disabled b4 setting */
out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */
- out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Addr */
out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
out32r(PCIL0_PMM0MA, 0xc0000001); /* 1G + No prefetching, */
/* and enable region */
@@ -532,7 +530,8 @@ void pci_target_init(struct pci_controller *hose)
if (is_monarch()) {
/* BAR2: map FPGA registers behind system memory at 1GB */
- pci_hose_write_config_dword(hose, 0, PCI_BASE_ADDRESS_2, 0x40000008);
+ pci_hose_write_config_dword(hose, 0,
+ PCI_BASE_ADDRESS_2, 0x40000008);
}
/*
@@ -562,10 +561,10 @@ void pci_target_init(struct pci_controller *hose)
CONFIG_SYS_PCI_CLASSCODE_NONMONARCH);
/* PCI configuration done: release ERREADY */
- out_be32((void*)GPIO1_OR,
- in_be32((void*)GPIO1_OR) | GPIO1_PPC_EREADY);
- out_be32((void*)GPIO1_TCR,
- in_be32((void*)GPIO1_TCR) | GPIO1_PPC_EREADY);
+ out_be32((void *)GPIO1_OR,
+ in_be32((void *)GPIO1_OR) | GPIO1_PPC_EREADY);
+ out_be32((void *)GPIO1_TCR,
+ in_be32((void *)GPIO1_TCR) | GPIO1_PPC_EREADY);
} else {
/* Program the board's subsystem id/classcode */
pci_hose_write_config_word(hose, 0, PCI_SUBSYSTEM_ID,
@@ -595,14 +594,14 @@ void pci_master_init(struct pci_controller *hose)
static void wait_for_pci_ready(void)
{
- if (!(in_be32((void*)GPIO1_IR) & GPIO1_PPC_EREADY)) {
+ if (!(in_be32((void *)GPIO1_IR) & GPIO1_PPC_EREADY)) {
printf("PCI: Waiting for EREADY (CTRL-C to skip) ... ");
while (1) {
if (ctrlc()) {
puts("abort\n");
break;
}
- if (in_be32((void*)GPIO1_IR) & GPIO1_PPC_EREADY) {
+ if (in_be32((void *)GPIO1_IR) & GPIO1_PPC_EREADY) {
printf("done\n");
break;
}
@@ -641,34 +640,73 @@ int is_pci_host(struct pci_controller *hose)
#endif /* defined(CONFIG_PCI) */
#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
+static int pmc440_setup_vsc8601(char *devname, int phy_addr,
+ unsigned short behavior, unsigned short method)
{
- char *s;
- unsigned short val_method, val_behavior;
+ /* adjust LED behavior */
+ if (miiphy_write(devname, phy_addr, 0x1f, 0x0001) != 0) {
+ printf("Phy%d: register write access failed\n", phy_addr);
+ return -1;
+ }
- /* special LED setup for NGCC/CANDES */
- if ((s = getenv("bd_type")) &&
- ((!strcmp(s, "ngcc")) || (!strcmp(s, "candes")))) {
- val_method = 0x0e0a;
- val_behavior = 0x0cf2;
- } else {
- /* PMC440 standard type */
- val_method = 0x0e10;
- val_behavior = 0x0cf0;
+ miiphy_write(devname, phy_addr, 0x11, 0x0010);
+ miiphy_write(devname, phy_addr, 0x11, behavior);
+ miiphy_write(devname, phy_addr, 0x10, method);
+ miiphy_write(devname, phy_addr, 0x1f, 0x0000);
+
+ return 0;
+}
+
+static int pmc440_setup_ksz9031(char *devname, int phy_addr)
+{
+ unsigned short id1, id2;
+
+ if (miiphy_read(devname, phy_addr, 2, &id1) ||
+ miiphy_read(devname, phy_addr, 3, &id2)) {
+ printf("Phy%d: cannot read id\n", phy_addr);
+ return -1;
}
- if (miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x1f, 0x0001) == 0) {
- miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, 0x0010);
- miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, val_behavior);
- miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x10, val_method);
- miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x1f, 0x0000);
+ if ((id1 != 0x0022) || ((id2 & 0xfff0) != 0x1620)) {
+ printf("Phy%d: unexpected id\n", phy_addr);
+ return -1;
}
- if (miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x1f, 0x0001) == 0) {
- miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, 0x0010);
- miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, val_behavior);
- miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x10, val_method);
- miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x1f, 0x0000);
+ /* MMD 2.08: adjust tx_clk pad skew */
+ miiphy_write(devname, phy_addr, 0x0d, 2);
+ miiphy_write(devname, phy_addr, 0x0e, 8);
+ miiphy_write(devname, phy_addr, 0x0d, 0x4002);
+ miiphy_write(devname, phy_addr, 0x0e, 0xf | (0x17 << 5));
+
+ return 0;
+}
+
+void reset_phy(void)
+{
+ char *s;
+ unsigned short val_method, val_behavior;
+
+ if (gd->board_type < 4) {
+ /* special LED setup for NGCC/CANDES */
+ s = getenv("bd_type");
+ if (s && ((!strcmp(s, "ngcc")) || (!strcmp(s, "candes")))) {
+ val_method = 0x0e0a;
+ val_behavior = 0x0cf2;
+ } else {
+ /* PMC440 standard type */
+ val_method = 0x0e10;
+ val_behavior = 0x0cf0;
+ }
+
+ /* boards up to rev. 1.3 use Vitesse VSC8601 phys */
+ pmc440_setup_vsc8601("ppc_4xx_eth0", CONFIG_PHY_ADDR,
+ val_method, val_behavior);
+ pmc440_setup_vsc8601("ppc_4xx_eth1", CONFIG_PHY1_ADDR,
+ val_method, val_behavior);
+ } else {
+ /* rev. 1.4 uses a Micrel KSZ9031 */
+ pmc440_setup_ksz9031("ppc_4xx_eth0", CONFIG_PHY_ADDR);
+ pmc440_setup_ksz9031("ppc_4xx_eth1", CONFIG_PHY1_ADDR);
}
}
#endif
@@ -729,7 +767,6 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
* We must write the address again when changing pages
* because the address counter only increments within a page.
*/
-
while (offset < end) {
unsigned alen, len;
unsigned maxlen;
@@ -771,8 +808,8 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
return rcode;
}
-int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset,
- uchar *buffer, unsigned cnt)
+static int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset,
+ uchar *buffer, unsigned cnt)
{
unsigned end = offset + cnt;
unsigned blk_off;
@@ -820,10 +857,10 @@ int board_usb_init(int index, enum usb_init_type init)
int i;
if ((act == NULL || strcmp(act, "host") == 0) &&
- !(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT))
+ !(in_be32((void *)GPIO0_IR) & GPIO0_USB_PRSNT))
/* enable power on USB socket */
- out_be32((void*)GPIO1_OR,
- in_be32((void*)GPIO1_OR) & ~GPIO1_USB_PWR_N);
+ out_be32((void *)GPIO1_OR,
+ in_be32((void *)GPIO1_OR) & ~GPIO1_USB_PWR_N);
for (i=0; i<1000; i++)
udelay(1000);
@@ -834,7 +871,7 @@ int board_usb_init(int index, enum usb_init_type init)
int usb_board_stop(void)
{
/* disable power on USB socket */
- out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_USB_PWR_N);
+ out_be32((void *)GPIO1_OR, in_be32((void *)GPIO1_OR) | GPIO1_USB_PWR_N);
return 0;
}
@@ -858,8 +895,8 @@ void ft_board_setup(void *blob, bd_t *bd)
rc = fdt_find_and_setprop(blob, "/plb/pci@1ec000000", "status",
"disabled", sizeof("disabled"), 1);
if (rc) {
- printf("Unable to update property status in PCI node, err=%s\n",
- fdt_strerror(rc));
+ printf("Unable to update property status in PCI node, ");
+ printf("err=%s\n", fdt_strerror(rc));
}
}
}