1 files changed, 0 insertions, 112 deletions
diff --git a/board/esd/dp405/dp405.c b/board/esd/dp405/dp405.c
deleted file mode 100644
index 730ff215e9..0000000000
--- a/board/esd/dp405/dp405.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * (C) Copyright 2001-2003
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <command.h>
-#include <malloc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f (void)
-{
-	/*
-	 * IRQ 0-15  405GP internally generated; active high; level sensitive
-	 * IRQ 16    405GP internally generated; active low; level sensitive
-	 * IRQ 17-24 RESERVED
-	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
-	 * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
-	 * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
-	 * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
-	 * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
-	 * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
-	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
-	 */
-	mtdcr(UIC0SR, 0xFFFFFFFF);       /* clear all ints */
-	mtdcr(UIC0ER, 0x00000000);       /* disable all ints */
-	mtdcr(UIC0CR, 0x00000000);       /* set all to be non-critical*/
-	mtdcr(UIC0PR, 0xFFFFFF80);       /* set int polarities */
-	mtdcr(UIC0TR, 0x10000000);       /* set int trigger levels */
-	mtdcr(UIC0VCR, 0x00000001);      /* set vect base=0,INT0 highest priority*/
-	mtdcr(UIC0SR, 0xFFFFFFFF);       /* clear all ints */
-
-	/*
-	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
-	 */
-	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
-
-	/*
-	 * Reset CPLD via GPIO13 (CS4) pin
-	 */
-	out_be32((void *)GPIO0_OR,
-		 in_be32((void *)GPIO0_OR) & ~(0x80000000 >> 13));
-	udelay(1000); /* wait 1ms */
-	out_be32((void *)GPIO0_OR,
-		 in_be32((void *)GPIO0_OR) | (0x80000000 >> 13));
-	udelay(1000); /* wait 1ms */
-
-	return 0;
-}
-
-int misc_init_r (void)
-{
-	/* adjust flash start and offset */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-	return (0);
-}
-
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	char str[64];
-	int i = getenv_f("serial#", str, sizeof(str));
-	unsigned char trans[16] = {0x0,0x8,0x4,0xc,0x2,0xa,0x6,0xe,
-				   0x1,0x9,0x5,0xd,0x3,0xb,0x7,0xf};
-	unsigned char id1, id2, rev;
-
-	puts ("Board: ");
-
-	if (i == -1)
-		puts ("### No HW ID - assuming DP405");
-	else
-		puts(str);
-
-	id1 = trans[(~(in_be32((void *)GPIO0_IR) >> 5)) & 0x0000000f];
-	id2 = trans[(~(in_be32((void *)GPIO0_IR) >> 9)) & 0x0000000f];
-
-	rev = in_8((void *)0xf0001000);
-	if (rev & 0x10) /* old DP405 compatibility */
-		rev = in_8((void *)0xf0000800);
-
-	switch (rev & 0xc0) {
-	case 0x00:
-		puts(" (HW=DP405");
-		break;
-	case 0x80:
-		puts(" (HW=DP405/CO");
-		break;
-	case 0xc0:
-		puts(" (HW=DN405");
-		break;
-	}
-	printf(", ID=0x%1X%1X, PLD=0x%02X", id2, id1, rev & 0x0f);
-
-	if ((rev & 0xc0) == 0xc0) {
-		printf(", C5V=%s",
-		       in_be32((void *)GPIO0_IR) & 0x40000000 ? "off" : "on");
-	}
-	puts(")\n");
-
-	return 0;
-}