diff options
Diffstat (limited to 'board/emk/top5200/top5200.c')
| -rw-r--r-- | board/emk/top5200/top5200.c | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/board/emk/top5200/top5200.c b/board/emk/top5200/top5200.c new file mode 100644 index 0000000000..536a5152a6 --- /dev/null +++ b/board/emk/top5200/top5200.c @@ -0,0 +1,216 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2003 + * Reinhard Meyer, EMK Elektronik GmbH, r.meyer@emk-elektronik.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc5xxx.h> +#include <pci.h> + +/***************************************************************************** + * initialize SDRAM/DDRAM controller. + * TBD: get data from I2C EEPROM + *****************************************************************************/ +long int initdram (int board_type) +{ + ulong dramsize = 0; +#ifndef CFG_RAMBOOT + ulong t; + ulong tap_del; + + #define MODE_EN 0x80000000 + #define SOFT_PRE 2 + #define SOFT_REF 4 + + /* configure SDRAM start/end */ + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = (CFG_SDRAM_BASE & 0xFFF00000) | CFG_DRAM_RAM_SIZE; + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */ + + /* setup config registers */ + *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = CFG_DRAM_CONFIG1; + *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = CFG_DRAM_CONFIG2; + + /* unlock mode register */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN; + /* precharge all banks */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_PRE; +#if CFG_DRAM_DDR + /* set extended mode register */ + *(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_EMODE; +#endif + /* set mode register */ + *(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_MODE | 0x0400; + /* precharge all banks */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_PRE; + /* auto refresh */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_REF; + /* set mode register */ + *(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_MODE; + /* normal operation */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL; + /* write default TAP delay */ + *(vu_long *)MPC5XXX_CDM_PORCFG = CFG_DRAM_TAP_DEL << 24; + +#if 0 + for (tap_del = 0; tap_del < 32; tap_del++) { + *(vu_long *)MPC5XXX_CDM_PORCFG = tap_del << 24; + + printf ("\nTAP Delay:%x Filling DRAM...", *(vu_long *)MPC5XXX_CDM_PORCFG); + for (t = 0; t < 0x04000000; t+=4) + *(vu_long *) t = t; + printf ("Checking DRAM...\n"); + for (t = 0; t < 0x04000000; t+=4) { + ulong rval = *(vu_long *) t; + if (rval != t) { + printf ("mismatch at %x: ", t); + printf (" 1.read %x", rval); + printf (" 2.read %x", *(vu_long *) t); + printf (" 3.read %x", *(vu_long *) t); + break; + } + } + } +#endif +#endif /* CFG_RAMBOOT */ + + dramsize = ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS0CFG - 0x13)) << 20); + + /* return total ram size */ + return dramsize; +} + +/***************************************************************************** + * print board identification + *****************************************************************************/ +int checkboard (void) +{ +#if defined (CONFIG_EVAL5200) + puts ("Board: EMK TOP5200 on EVAL5200\n"); +#else +#if defined (CONFIG_MINI5200) + puts ("Board: EMK TOP5200 on MINI5200\n"); +#else + puts ("Board: EMK TOP5200\n"); +#endif +#endif + return 0; +} + +/***************************************************************************** + * prepare for FLASH detection + *****************************************************************************/ +void flash_preinit(void) +{ + /* + * Now, when we are in RAM, enable flash write + * access for detection process. + * Note that CS_BOOT cannot be cleared when + * executing in flash. + */ + *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ +} + +/***************************************************************************** + * finalize FLASH setup + *****************************************************************************/ +void flash_afterinit(uint bank, ulong start, ulong size) +{ + if (bank == 0) { /* adjust mapping */ + *(vu_long *)MPC5XXX_BOOTCS_START = + *(vu_long *)MPC5XXX_CS0_START = START_REG(start); + *(vu_long *)MPC5XXX_BOOTCS_STOP = + *(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(start, size); + } +} + +/***************************************************************************** + * otherinits after RAM is there and we are relocated to RAM + * note: though this is an int function, nobody cares for the result! + *****************************************************************************/ +int misc_init_r (void) +{ + /* read 'factory' part of EEPROM */ + uchar buf[81]; + uchar *p; + uint length; + uint addr; + uint len; + + /* get length first */ + addr = CFG_FACT_OFFSET; + if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, 2)) { +bailout: + printf ("cannot read factory configuration\n"); + printf ("be sure to set ethaddr yourself!\n"); + return 0; + } + length = buf[0] + (buf[1] << 8); + addr += 2; + + /* sanity check */ + if (length < 20 || length > CFG_FACT_SIZE - 2) + goto bailout; + + /* read lines */ + while (length > 0) { + /* read one line */ + len = length > 80 ? 80 : length; + if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, len)) + goto bailout; + /* mark end of buffer */ + buf[len] = 0; + /* search end of line */ + for (p = buf; *p && *p != 0x0a; p++); + if (!*p) + goto bailout; + *p++ = 0; + /* advance to next line start */ + length -= p - buf; + addr += p - buf; + /*printf ("%s\n", buf); */ + /* search for our specific entry */ + if (!strncmp ((char *) buf, "[RLA/lan/Ethernet] ", 19)) { + setenv ("ethaddr", buf + 19); + } else if (!strncmp ((char *) buf, "[BOARD/SERIAL] ", 15)) { + setenv ("serial#", buf + 15); + } else if (!strncmp ((char *) buf, "[BOARD/TYPE] ", 13)) { + setenv ("board_id", buf + 13); + } + } + return (0); +} + +/***************************************************************************** + * initialize the PCI system + *****************************************************************************/ +#ifdef CONFIG_PCI +static struct pci_controller hose; + +extern void pci_mpc5xxx_init(struct pci_controller *); + +void pci_init_board(void) +{ + pci_mpc5xxx_init(&hose); +} +#endif |