diff options
Diffstat (limited to 'board/eNET/eNET.c')
-rw-r--r-- | board/eNET/eNET.c | 167 |
1 files changed, 167 insertions, 0 deletions
diff --git a/board/eNET/eNET.c b/board/eNET/eNET.c new file mode 100644 index 00000000000..57dd6359e78 --- /dev/null +++ b/board/eNET/eNET.c @@ -0,0 +1,167 @@ +/* + * (C) Copyright 2008 + * Graeme Russ, graeme.russ@gmail.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/ic/sc520.h> + +#ifdef CONFIG_HW_WATCHDOG +#include <watchdog.h> +#endif + +#include "hardware.h" + +DECLARE_GLOBAL_DATA_PTR; + +#undef SC520_CDP_DEBUG + +#ifdef SC520_CDP_DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + +unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN; + +void init_sc520_enet (void) +{ + /* Set CPU Speed to 100MHz */ + write_mmcr_byte(SC520_CPUCTL, 1); + gd->cpu_clk = 100000000; + + /* wait at least one millisecond */ + asm("movl $0x2000,%%ecx\n" + "wait_loop: pushl %%ecx\n" + "popl %%ecx\n" + "loop wait_loop\n": : : "ecx"); + + /* turn on the SDRAM write buffer */ + write_mmcr_byte(SC520_DBCTL, 0x11); + + /* turn on the cache and disable write through */ + asm("movl %%cr0, %%eax\n" + "andl $0x9fffffff, %%eax\n" + "movl %%eax, %%cr0\n" : : : "eax"); +} + +/* + * Miscellaneous platform dependent initializations + */ +int board_init(void) +{ + init_sc520_enet(); + + write_mmcr_byte(SC520_GPCSRT, 0x01); /* GP Chip Select Recovery Time */ + write_mmcr_byte(SC520_GPCSPW, 0x07); /* GP Chip Select Pulse Width */ + write_mmcr_byte(SC520_GPCSOFF, 0x00); /* GP Chip Select Offset */ + write_mmcr_byte(SC520_GPRDW, 0x05); /* GP Read pulse width */ + write_mmcr_byte(SC520_GPRDOFF, 0x01); /* GP Read offset */ + write_mmcr_byte(SC520_GPWRW, 0x05); /* GP Write pulse width */ + write_mmcr_byte(SC520_GPWROFF, 0x01); /* GP Write offset */ + + write_mmcr_word(SC520_PIODATA15_0, 0x0630); /* PIO15_PIO0 Data */ + write_mmcr_word(SC520_PIODATA31_16, 0x2000); /* PIO31_PIO16 Data */ + write_mmcr_word(SC520_PIODIR31_16, 0x2000); /* GPIO Direction */ + write_mmcr_word(SC520_PIODIR15_0, 0x87b5); /* GPIO Direction */ + write_mmcr_word(SC520_PIOPFS31_16, 0x0dfe); /* GPIO pin function 31-16 reg */ + write_mmcr_word(SC520_PIOPFS15_0, 0x200a); /* GPIO pin function 15-0 reg */ + write_mmcr_byte(SC520_CSPFS, 0x00f8); /* Chip Select Pin Function Select */ + + write_mmcr_long(SC520_PAR2, 0x200713f8); /* Uart A (GPCS0, 0x013f8, 8 Bytes) */ + write_mmcr_long(SC520_PAR3, 0x2c0712f8); /* Uart B (GPCS3, 0x012f8, 8 Bytes) */ + write_mmcr_long(SC520_PAR4, 0x300711f8); /* Uart C (GPCS4, 0x011f8, 8 Bytes) */ + write_mmcr_long(SC520_PAR5, 0x340710f8); /* Uart D (GPCS5, 0x010f8, 8 Bytes) */ + write_mmcr_long(SC520_PAR6, 0xe3ffc000); /* SDRAM (0x00000000, 128MB) */ + write_mmcr_long(SC520_PAR7, 0xaa3fd000); /* StrataFlash (ROMCS1, 0x10000000, 16MB) */ + write_mmcr_long(SC520_PAR8, 0xca3fd100); /* StrataFlash (ROMCS2, 0x11000000, 16MB) */ + write_mmcr_long(SC520_PAR9, 0x4203d900); /* SRAM (GPCS0, 0x19000000, 1MB) */ + write_mmcr_long(SC520_PAR10, 0x4e03d910); /* SRAM (GPCS3, 0x19100000, 1MB) */ + write_mmcr_long(SC520_PAR11, 0x50018100); /* DP-RAM (GPCS4, 0x18100000, 4kB) */ + write_mmcr_long(SC520_PAR12, 0x54020000); /* CFLASH1 (0x200000000, 4kB) */ + write_mmcr_long(SC520_PAR13, 0x5c020001); /* CFLASH2 (0x200010000, 4kB) */ +/* write_mmcr_long(SC520_PAR14, 0x8bfff800); */ /* BOOTCS at 0x18000000 */ +/* write_mmcr_long(SC520_PAR15, 0x38201000); */ /* LEDs etc (GPCS6, 0x1000, 20 Bytes */ + + /* Disable Watchdog */ + write_mmcr_word(0x0cb0, 0x3333); + write_mmcr_word(0x0cb0, 0xcccc); + write_mmcr_word(0x0cb0, 0x0000); + + /* Chip Select Configuration */ + write_mmcr_word(SC520_BOOTCSCTL, 0x0033); + write_mmcr_word(SC520_ROMCS1CTL, 0x0615); + write_mmcr_word(SC520_ROMCS2CTL, 0x0615); + + write_mmcr_byte(SC520_ADDDECCTL, 0x02); + write_mmcr_byte(SC520_UART1CTL, 0x07); + write_mmcr_byte(SC520_SYSARBCTL,0x06); + write_mmcr_word(SC520_SYSARBMENB, 0x0003); + + /* Crystal is 33.000MHz */ + gd->bus_clk = 33000000; + + return 0; +} + +int dram_init(void) +{ + init_sc520_dram(); + return 0; +} + +void show_boot_progress(int val) +{ + uchar led_mask; + + led_mask = 0x00; + + if (val < 0) + led_mask |= LED_ERR_BITMASK; + + led_mask |= (uchar)(val & 0x001f); + outb(led_mask, LED_LATCH_ADDRESS); +} + + +int last_stage_init(void) +{ + int minor; + int major; + + major = minor = 0; + + printf("Serck Controls eNET\n"); + + return 0; +} + +ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) +{ + if (banknum == 0) { /* non-CFI boot flash */ + info->portwidth = FLASH_CFI_8BIT; + info->chipwidth = FLASH_CFI_BY8; + info->interface = FLASH_CFI_X8; + return 1; + } else + return 0; +} |