summaryrefslogtreecommitdiff
path: root/board/dvlhost/dvlhost.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/dvlhost/dvlhost.c')
-rw-r--r--board/dvlhost/dvlhost.c112
1 files changed, 0 insertions, 112 deletions
diff --git a/board/dvlhost/dvlhost.c b/board/dvlhost/dvlhost.c
deleted file mode 100644
index 087070f40d..0000000000
--- a/board/dvlhost/dvlhost.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * (C) Copyright 2009
- * Michael Schwingen, michael@schwingen.org
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <config.h>
-#include <command.h>
-#include <malloc.h>
-#include <asm/arch/ixp425.h>
-#include <asm/io.h>
-#include <miiphy.h>
-#ifdef CONFIG_PCI
-#include <pci.h>
-#include <asm/arch/ixp425pci.h>
-#endif
-
-#include "dvlhost_hw.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
- /* CS1: LED Latch */
- writel(0xBFFF0002, IXP425_EXP_CS1);
- return 0;
-}
-
-int board_init(void)
-{
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x00000100;
-
- /* Setup GPIOs used as output */
- GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_WDGTRIGGER);
- GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_DLAN_PAIRING);
- GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_PCIRST);
-
- /*
- * LED latch enable and watchdog enable are tied to the same GPIO,
- * so we need to trigger the watchdog if we want to enable the LEDs.
- */
-#ifdef CONFIG_HW_WATCHDOG
- GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_WDG_LED_EN);
-#else
- GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_WDG_LED_EN);
-#endif
-
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_WDGTRIGGER);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DLAN_PAIRING);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_WDG_LED_EN);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCIRST);
-
- /* Setup GPIOs for Interrupt inputs */
- GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_BTN_WLAN);
- GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_BTN_PAIRING);
- GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_BTN_RESET);
- GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_IRQA);
- GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_IRQB);
-
- /* Setup GPIO's for 33MHz clock output */
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK);
- writel(0x01FF01FF, IXP425_GPIO_GPCLKR);
-
- /* turn off all LEDs */
- writew(0x0000, DVLHOST_LED_LATCH);
-
- udelay(533);
- GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_PCIRST);
-
- return 0;
-}
-
-/* Check Board Identity */
-int checkboard(void)
-{
- char *s = getenv("serial#");
-
- puts("Board: dLAN 200AV (dvlhost)");
-
- if (s != NULL) {
- puts(", serial# ");
- puts(s);
- }
- putc('\n');
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20);
- return 0;
-}
-
-#ifdef CONFIG_PCI
-struct pci_controller hose;
-
-void pci_init_board(void)
-{
- pci_ixp_init(&hose);
-}
-#endif
-
-void reset_phy(void)
-{
- /* init IcPlus IP175C ethernet switch to native IP175C mode */
- miiphy_write("NPE1", 29, 31, 0x175C);
-}