diff options
Diffstat (limited to 'board/dbau1x00/dbau1x00.c')
| -rw-r--r-- | board/dbau1x00/dbau1x00.c | 110 |
1 files changed, 110 insertions, 0 deletions
diff --git a/board/dbau1x00/dbau1x00.c b/board/dbau1x00/dbau1x00.c new file mode 100644 index 00000000000..3b6fcec1c8a --- /dev/null +++ b/board/dbau1x00/dbau1x00.c @@ -0,0 +1,110 @@ +/* + * (C) Copyright 2003 + * Thomas.Lange@corelatus.se + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <asm/au1x00.h> +#include <asm/mipsregs.h> + +long int initdram(int board_type) +{ + /* Sdram is setup by assembler code */ + /* If memory could be changed, we should return the true value here */ + return 64*1024*1024; +} + +#define BCSR_PCMCIA_PC0DRVEN 0x0010 +#define BCSR_PCMCIA_PC0RST 0x0080 + +/* In cpu/mips/cpu.c */ +void write_one_tlb( int index, u32 pagemask, u32 hi, u32 low0, u32 low1 ); + +int checkboard (void) +{ + u16 status; + volatile u32 *pcmcia_bcsr = (u32*)(DB1000_BCSR_ADDR+0x10); + volatile u32 *phy = (u32*)(DB1000_BCSR_ADDR+0xC); + volatile u32 *sys_counter = (volatile u32*)SYS_COUNTER_CNTRL; + u32 proc_id; + + *sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */ + + proc_id = read_32bit_cp0_register(CP0_PRID); + + switch(proc_id>>24){ + case 0: + puts("Board: Merlot (DbAu1000)\n"); + printf("CPU: Au1000 396 MHz, id: 0x%02x, rev: 0x%02x\n", + (proc_id>>8)&0xFF,proc_id&0xFF); + break; + default: + printf("Unsupported cpu %d, proc_id=0x%x\n",proc_id>>24,proc_id); + } +#ifdef CONFIG_IDE_PCMCIA + /* Enable 3.3 V on slot 0 ( VCC ) + No 5V */ + status = 4; + *pcmcia_bcsr = status; + + status |= BCSR_PCMCIA_PC0DRVEN; + *pcmcia_bcsr = status; + au_sync(); + + udelay(300*1000); + + status |= BCSR_PCMCIA_PC0RST; + *pcmcia_bcsr = status; + au_sync(); + + udelay(100*1000); + + /* PCMCIA is on a 36 bit physical address. + We need to map it into a 32 bit addresses */ + +#if 0 + /* We dont need theese unless we run whole pcmcia package */ + write_one_tlb(20, /* index */ + 0x01ffe000, /* Pagemask, 16 MB pages */ + CFG_PCMCIA_IO_BASE, /* Hi */ + 0x3C000017, /* Lo0 */ + 0x3C200017); /* Lo1 */ + + write_one_tlb(21, /* index */ + 0x01ffe000, /* Pagemask, 16 MB pages */ + CFG_PCMCIA_ATTR_BASE, /* Hi */ + 0x3D000017, /* Lo0 */ + 0x3D200017); /* Lo1 */ +#endif + write_one_tlb(22, /* index */ + 0x01ffe000, /* Pagemask, 16 MB pages */ + CFG_PCMCIA_MEM_ADDR, /* Hi */ + 0x3E000017, /* Lo0 */ + 0x3E200017); /* Lo1 */ + + /* Release reset of ethernet PHY chips */ + /* Always do this, because linux does not know about it */ + *phy = 3; + + return 0; +#endif +} |