diff options
Diffstat (limited to 'board/davinci/da8xxevm/README.omapl138-lcdk')
| -rw-r--r-- | board/davinci/da8xxevm/README.omapl138-lcdk | 28 |
1 files changed, 28 insertions, 0 deletions
diff --git a/board/davinci/da8xxevm/README.omapl138-lcdk b/board/davinci/da8xxevm/README.omapl138-lcdk new file mode 100644 index 0000000000..ea0c53d043 --- /dev/null +++ b/board/davinci/da8xxevm/README.omapl138-lcdk @@ -0,0 +1,28 @@ +Summary +======= +This README assumes you have read README.da850. It contains some additional +information specific to building the omapl138-lcdk. The AIS file as generated +by the build is, currently, not useable due to differences in the flash +available on this board, as compared to the da850evm boards. + +Flash Differences +================= +Refer to the discussion in [1] for more detail - basically the da850evm uses +SPI flash whereas the lcdk uses NAND flash to store the bootloader, and +the support isn't there in the SPL code. + +It should be possible to add the support in the SPL code should someone be +sufficiently motivated. + +Using the built image +===================== +The output image to use is u-boot.bin. This needs to be converted to an +AIS file as described in [1] and then flashed using the utitilty linked to +there and also described in README.da850. You _may_ be able to write using +u-boot itself, but the commands in README.da850 won't work as they write to +SPI rather than NAND. + +Links +===== +[1] + http://e2e.ti.com/support/dsp/omap_applications_processors/f/42/t/386829
\ No newline at end of file |