diff options
Diffstat (limited to 'board/cradle')
| -rw-r--r-- | board/cradle/memsetup.S | 515 |
1 files changed, 515 insertions, 0 deletions
diff --git a/board/cradle/memsetup.S b/board/cradle/memsetup.S new file mode 100644 index 00000000000..2f1e042fbb0 --- /dev/null +++ b/board/cradle/memsetup.S @@ -0,0 +1,515 @@ +/* + * Most of this taken from Redboot hal_platform_setup.h with cleanup + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/pxa-regs.h> + +DRAM_SIZE: .long CFG_DRAM_SIZE + +/* wait for coprocessor write complete */ + .macro CPWAIT reg + mrc p15,0,\reg,c2,c0,0 + mov \reg,\reg + sub pc,pc,#4 + .endm + + .macro SET_LED val + ldr r6, =CRADLE_LED_CLR_REG + ldr r7, =0 + str r7, [r6] + ldr r6, =CRADLE_LED_SET_REG + ldr r7, =\val + str r7, [r6] + .endm + + +.globl memsetup +memsetup: + + mov r10, lr + + /* Set up GPIO pins first */ + + ldr r0, =GPSR0 + ldr r1, =CFG_GPSR0_VAL + str r1, [r0] + + ldr r0, =GPSR1 + ldr r1, =CFG_GPSR1_VAL + str r1, [r0] + + ldr r0, =GPSR2 + ldr r1, =CFG_GPSR2_VAL + str r1, [r0] + + ldr r0, =GPCR0 + ldr r1, =CFG_GPCR0_VAL + str r1, [r0] + + ldr r0, =GPCR1 + ldr r1, =CFG_GPCR1_VAL + str r1, [r0] + + ldr r0, =GPCR2 + ldr r1, =CFG_GPCR2_VAL + str r1, [r0] + + ldr r0, =GRER0 + ldr r1, =CFG_GRER0_VAL + str r1, [r0] + + ldr r0, =GRER1 + ldr r1, =CFG_GRER1_VAL + str r1, [r0] + + ldr r0, =GRER2 + ldr r1, =CFG_GRER2_VAL + str r1, [r0] + + ldr r0, =GFER0 + ldr r1, =CFG_GFER0_VAL + str r1, [r0] + + ldr r0, =GFER1 + ldr r1, =CFG_GFER1_VAL + str r1, [r0] + + ldr r0, =GFER2 + ldr r1, =CFG_GFER2_VAL + str r1, [r0] + + ldr r0, =GPDR0 + ldr r1, =CFG_GPDR0_VAL + str r1, [r0] + + ldr r0, =GPDR1 + ldr r1, =CFG_GPDR1_VAL + str r1, [r0] + + ldr r0, =GPDR2 + ldr r1, =CFG_GPDR2_VAL + str r1, [r0] + + ldr r0, =GAFR0_L + ldr r1, =CFG_GAFR0_L_VAL + str r1, [r0] + + ldr r0, =GAFR0_U + ldr r1, =CFG_GAFR0_U_VAL + str r1, [r0] + + ldr r0, =GAFR1_L + ldr r1, =CFG_GAFR1_L_VAL + str r1, [r0] + + ldr r0, =GAFR1_U + ldr r1, =CFG_GAFR1_U_VAL + str r1, [r0] + + ldr r0, =GAFR2_L + ldr r1, =CFG_GAFR2_L_VAL + str r1, [r0] + + ldr r0, =GAFR2_U + ldr r1, =CFG_GAFR2_U_VAL + str r1, [r0] + + /* enable GPIO pins */ + ldr r0, =PSSR + ldr r1, =CFG_PSSR_VAL + str r1, [r0] + + SET_LED 1 + + ldr r3, =MSC1 /* low - bank 2 Lubbock Registers / SRAM */ + ldr r2, =CFG_MSC1_VAL /* high - bank 3 Ethernet Controller */ + str r2, [r3] /* need to set MSC1 before trying to write to the HEX LEDs */ + ldr r2, [r3] /* need to read it back to make sure the value latches (see MSC section of manual) */ + + +/********************************************************************* + Initlialize Memory Controller + + See PXA250 Operating System Developer's Guide + + pause for 200 uSecs- allow internal clocks to settle + *Note: only need this if hard reset... doing it anyway for now +*/ + + @ Step 1 + @ ---- Wait 200 usec + ldr r3, =OSCR @ reset the OS Timer Count to zero + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + + SET_LED 2 + +mem_init: + @ get memory controller base address + ldr r1, =MEMC_BASE + + +@**************************************************************************** +@ Step 2 +@ + + @ Step 2a + @ write msc0, read back to ensure data latches + @ + ldr r2, =CFG_MSC0_VAL + str r2, [r1, #MSC0_OFFSET] + ldr r2, [r1, #MSC0_OFFSET] + + @ write msc1 + ldr r2, =CFG_MSC1_VAL + str r2, [r1, #MSC1_OFFSET] + ldr r2, [r1, #MSC1_OFFSET] + + @ write msc2 + ldr r2, =CFG_MSC2_VAL + str r2, [r1, #MSC2_OFFSET] + ldr r2, [r1, #MSC2_OFFSET] + + @ Step 2b + @ write mecr + ldr r2, =CFG_MECR_VAL + str r2, [r1, #MECR_OFFSET] + + @ write mcmem0 + ldr r2, =CFG_MCMEM0_VAL + str r2, [r1, #MCMEM0_OFFSET] + + @ write mcmem1 + ldr r2, =CFG_MCMEM1_VAL + str r2, [r1, #MCMEM1_OFFSET] + + @ write mcatt0 + ldr r2, =CFG_MCATT0_VAL + str r2, [r1, #MCATT0_OFFSET] + + @ write mcatt1 + ldr r2, =CFG_MCATT1_VAL + str r2, [r1, #MCATT1_OFFSET] + + @ write mcio0 + ldr r2, =CFG_MCIO0_VAL + str r2, [r1, #MCIO0_OFFSET] + + @ write mcio1 + ldr r2, =CFG_MCIO1_VAL + str r2, [r1, #MCIO1_OFFSET] + + /*SET_LED 3 */ + + @ Step 2c + @ fly-by-dma is defeatured on this part + @ write flycnfg + @ldr r2, =CFG_FLYCNFG_VAL + @str r2, [r1, #FLYCNFG_OFFSET] + +/* FIXME Does this sequence really make sense */ +#ifdef REDBOOT_WAY + @ Step 2d + @ get the mdrefr settings + ldr r3, =CFG_MDREFR_VAL + + @ extract DRI field (we need a valid DRI field) + @ + ldr r2, =0xFFF + + @ valid DRI field in r3 + @ + and r3, r3, r2 + + @ get the reset state of MDREFR + @ + ldr r4, [r1, #MDREFR_OFFSET] + + @ clear the DRI field + @ + bic r4, r4, r2 + + @ insert the valid DRI field loaded above + @ + orr r4, r4, r3 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + + @ *Note: preserve the mdrefr value in r4 * + + /*SET_LED 4 */ + +@**************************************************************************** +@ Step 3 +@ +@ NO SRAM + + mov pc, r10 + + +@**************************************************************************** +@ Step 4 +@ + + @ Assumes previous mdrefr value in r4, if not then read current mdrefr + + @ clear the free-running clock bits + @ (clear K0Free, K1Free, K2Free + @ + bic r4, r4, #(0x00800000 | 0x01000000 | 0x02000000) + + @ set K0RUN for CPLD clock + @ + orr r4, r4, #0x00002000 + + @ set K1RUN if bank 0 installed + @ + orr r4, r4, #0x00010000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + @ deassert SLFRSH + @ + bic r4, r4, #0x00400000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + + @ assert E1PIN + @ + orr r4, r4, #0x00008000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + nop + nop +#else + @ Step 2d + @ get the mdrefr settings + ldr r3, =CFG_MDREFR_VAL + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + + @ Step 4 + + @ set K0RUN for CPLD clock + @ + orr r4, r4, #0x00002000 + + @ set K1RUN for bank 0 + @ + orr r4, r4, #0x00010000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + @ deassert SLFRSH + @ + bic r4, r4, #0x00400000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + + @ assert E1PIN + @ + orr r4, r4, #0x00008000 + + @ write back mdrefr + @ + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + nop + nop +#endif + + @ Step 4d + @ fetch platform value of mdcnfg + @ + ldr r2, =CFG_MDCNFG_VAL + + @ disable all sdram banks + @ + bic r2, r2, #(MDCNFG_DE0 | MDCNFG_DE1) + bic r2, r2, #(MDCNFG_DE2 | MDCNFG_DE3) + + @ program banks 0/1 for bus width + @ + bic r2, r2, #MDCNFG_DWID0 @0=32-bit + + @ write initial value of mdcnfg, w/o enabling sdram banks + @ + str r2, [r1, #MDCNFG_OFFSET] + + @ Step 4e + @ pause for 200 uSecs + @ + ldr r3, =OSCR @ reset the OS Timer Count to zero + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + + /*SET_LED 5 */ + + /* Why is this here??? */ + mov r0, #0x78 @turn everything off + mcr p15, 0, r0, c1, c0, 0 @(caches off, MMU off, etc.) + + @ Step 4f + @ Access memory *not yet enabled* for CBR refresh cycles (8) + @ - CBR is generated for all banks + + ldr r2, =CFG_DRAM_BASE + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + str r2, [r2] + + @ Step 4g + @get memory controller base address + @ + ldr r1, =MEMC_BASE + + @fetch current mdcnfg value + @ + ldr r3, [r1, #MDCNFG_OFFSET] + + @enable sdram bank 0 if installed (must do for any populated bank) + @ + orr r3, r3, #MDCNFG_DE0 + + @write back mdcnfg, enabling the sdram bank(s) + @ + str r3, [r1, #MDCNFG_OFFSET] + + @ Step 4h + @ write mdmrs + @ + ldr r2, =CFG_MDMRS_VAL + str r2, [r1, #MDMRS_OFFSET] + + @ Done Memory Init + + /*SET_LED 6 */ + + @******************************************************************** + @ Disable (mask) all interrupts at the interrupt controller + @ + + @ clear the interrupt level register (use IRQ, not FIQ) + @ + mov r1, #0 + ldr r2, =ICLR + str r1, [r2] + + @ Set interrupt mask register + @ + ldr r1, =CFG_ICMR_VAL + ldr r2, =ICMR + str r1, [r2] + + @ ******************************************************************** + @ Disable the peripheral clocks, and set the core clock + @ + + @ Turn Off ALL on-chip peripheral clocks for re-configuration + @ + ldr r1, =CKEN + mov r2, #0 + str r2, [r1] + + @ set core clocks + @ + ldr r2, =CFG_CCCR_VAL + ldr r1, =CCCR + str r2, [r1] + +#ifdef ENABLE32KHZ + @ enable the 32Khz oscillator for RTC and PowerManager + @ + ldr r1, =OSCC + mov r2, #OSCC_OON + str r2, [r1] + + @ NOTE: spin here until OSCC.OOK get set, + @ meaning the PLL has settled. + @ +60: + ldr r2, [r1] + ands r2, r2, #1 + beq 60b +#endif + + @ Turn on needed clocks + @ + ldr r1, =CKEN + ldr r2, =CFG_CKEN_VAL + str r2, [r1] + + /*SET_LED 7 */ + +/* Is this needed???? */ +#define NODEBUG +#ifdef NODEBUG + /*Disable software and data breakpoints */ + mov r0,#0 + mcr p15,0,r0,c14,c8,0 /* ibcr0 */ + mcr p15,0,r0,c14,c9,0 /* ibcr1 */ + mcr p15,0,r0,c14,c4,0 /* dbcon */ + + /*Enable all debug functionality */ + mov r0,#0x80000000 + mcr p14,0,r0,c10,c0,0 /* dcsr */ + +#endif + + /*SET_LED 8 */ + + mov pc, r10 + +@ End memsetup |