diff options
Diffstat (limited to 'board/cradle')
-rw-r--r-- | board/cradle/flash.c | 18 | ||||
-rw-r--r-- | board/cradle/lowlevel_init.S | 86 |
2 files changed, 52 insertions, 52 deletions
diff --git a/board/cradle/flash.c b/board/cradle/flash.c index 4783d92608b..b5635fbc265 100644 --- a/board/cradle/flash.c +++ b/board/cradle/flash.c @@ -30,7 +30,7 @@ #define FLASH_BANK_SIZE 0x400000 #define MAIN_SECT_SIZE 0x20000 -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /*----------------------------------------------------------------------- @@ -41,15 +41,15 @@ ulong flash_init (void) int i, j; ulong size = 0; - for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { ulong flashbase = 0; flash_info[i].flash_id = (INTEL_MANUFACT & FLASH_VENDMASK) | (INTEL_ID_28F128J3 & FLASH_TYPEMASK); flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CFG_MAX_FLASH_SECT; - memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); + flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; + memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); switch (i) { case 0: flashbase = PHYS_FLASH_1; @@ -71,8 +71,8 @@ ulong flash_init (void) /* Protect monitor and environment sectors */ flash_protect (FLAG_PROTECT_SET, - CFG_FLASH_BASE, - CFG_FLASH_BASE + monitor_flash_len - 1, + CONFIG_SYS_FLASH_BASE, + CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]); flash_protect (FLAG_PROTECT_SET, @@ -88,7 +88,7 @@ void flash_print_info (flash_info_t * info) { int i, j; - for (j = 0; j < CFG_MAX_FLASH_BANKS; j++) { + for (j = 0; j < CONFIG_SYS_MAX_FLASH_BANKS; j++) { switch (info->flash_id & FLASH_VENDMASK) { case (INTEL_MANUFACT & FLASH_VENDMASK): printf ("Intel: "); @@ -183,7 +183,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) while ((*addr & 0x80) != 0x80) { if (get_timer_masked () > - CFG_FLASH_ERASE_TOUT) { + CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = 0xB0; /* suspend erase */ *addr = 0xFF; /* reset to read mode */ rc = ERR_TIMOUT; @@ -250,7 +250,7 @@ static int write_word (flash_info_t * info, ulong dest, ushort data) /* wait while polling the status register */ while (((val = *addr) & 0x80) != 0x80) { - if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) { + if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { rc = ERR_TIMOUT; /* suspend program command */ *addr = 0xB0; diff --git a/board/cradle/lowlevel_init.S b/board/cradle/lowlevel_init.S index 2fd307f1d0e..6b5cfb922b5 100644 --- a/board/cradle/lowlevel_init.S +++ b/board/cradle/lowlevel_init.S @@ -24,7 +24,7 @@ #include <version.h> #include <asm/arch/pxa-regs.h> -DRAM_SIZE: .long CFG_DRAM_SIZE +DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE /* wait for coprocessor write complete */ .macro CPWAIT reg @@ -51,98 +51,98 @@ lowlevel_init: /* Set up GPIO pins first */ ldr r0, =GPSR0 - ldr r1, =CFG_GPSR0_VAL + ldr r1, =CONFIG_SYS_GPSR0_VAL str r1, [r0] ldr r0, =GPSR1 - ldr r1, =CFG_GPSR1_VAL + ldr r1, =CONFIG_SYS_GPSR1_VAL str r1, [r0] ldr r0, =GPSR2 - ldr r1, =CFG_GPSR2_VAL + ldr r1, =CONFIG_SYS_GPSR2_VAL str r1, [r0] ldr r0, =GPCR0 - ldr r1, =CFG_GPCR0_VAL + ldr r1, =CONFIG_SYS_GPCR0_VAL str r1, [r0] ldr r0, =GPCR1 - ldr r1, =CFG_GPCR1_VAL + ldr r1, =CONFIG_SYS_GPCR1_VAL str r1, [r0] ldr r0, =GPCR2 - ldr r1, =CFG_GPCR2_VAL + ldr r1, =CONFIG_SYS_GPCR2_VAL str r1, [r0] ldr r0, =GRER0 - ldr r1, =CFG_GRER0_VAL + ldr r1, =CONFIG_SYS_GRER0_VAL str r1, [r0] ldr r0, =GRER1 - ldr r1, =CFG_GRER1_VAL + ldr r1, =CONFIG_SYS_GRER1_VAL str r1, [r0] ldr r0, =GRER2 - ldr r1, =CFG_GRER2_VAL + ldr r1, =CONFIG_SYS_GRER2_VAL str r1, [r0] ldr r0, =GFER0 - ldr r1, =CFG_GFER0_VAL + ldr r1, =CONFIG_SYS_GFER0_VAL str r1, [r0] ldr r0, =GFER1 - ldr r1, =CFG_GFER1_VAL + ldr r1, =CONFIG_SYS_GFER1_VAL str r1, [r0] ldr r0, =GFER2 - ldr r1, =CFG_GFER2_VAL + ldr r1, =CONFIG_SYS_GFER2_VAL str r1, [r0] ldr r0, =GPDR0 - ldr r1, =CFG_GPDR0_VAL + ldr r1, =CONFIG_SYS_GPDR0_VAL str r1, [r0] ldr r0, =GPDR1 - ldr r1, =CFG_GPDR1_VAL + ldr r1, =CONFIG_SYS_GPDR1_VAL str r1, [r0] ldr r0, =GPDR2 - ldr r1, =CFG_GPDR2_VAL + ldr r1, =CONFIG_SYS_GPDR2_VAL str r1, [r0] ldr r0, =GAFR0_L - ldr r1, =CFG_GAFR0_L_VAL + ldr r1, =CONFIG_SYS_GAFR0_L_VAL str r1, [r0] ldr r0, =GAFR0_U - ldr r1, =CFG_GAFR0_U_VAL + ldr r1, =CONFIG_SYS_GAFR0_U_VAL str r1, [r0] ldr r0, =GAFR1_L - ldr r1, =CFG_GAFR1_L_VAL + ldr r1, =CONFIG_SYS_GAFR1_L_VAL str r1, [r0] ldr r0, =GAFR1_U - ldr r1, =CFG_GAFR1_U_VAL + ldr r1, =CONFIG_SYS_GAFR1_U_VAL str r1, [r0] ldr r0, =GAFR2_L - ldr r1, =CFG_GAFR2_L_VAL + ldr r1, =CONFIG_SYS_GAFR2_L_VAL str r1, [r0] ldr r0, =GAFR2_U - ldr r1, =CFG_GAFR2_U_VAL + ldr r1, =CONFIG_SYS_GAFR2_U_VAL str r1, [r0] /* enable GPIO pins */ ldr r0, =PSSR - ldr r1, =CFG_PSSR_VAL + ldr r1, =CONFIG_SYS_PSSR_VAL str r1, [r0] SET_LED 1 ldr r3, =MSC1 /* low - bank 2 Lubbock Registers / SRAM */ - ldr r2, =CFG_MSC1_VAL /* high - bank 3 Ethernet Controller */ + ldr r2, =CONFIG_SYS_MSC1_VAL /* high - bank 3 Ethernet Controller */ str r2, [r3] /* need to set MSC1 before trying to write to the HEX LEDs */ ldr r2, [r3] /* need to read it back to make sure the value latches (see MSC section of manual) */ @@ -181,47 +181,47 @@ mem_init: @ Step 2a @ write msc0, read back to ensure data latches @ - ldr r2, =CFG_MSC0_VAL + ldr r2, =CONFIG_SYS_MSC0_VAL str r2, [r1, #MSC0_OFFSET] ldr r2, [r1, #MSC0_OFFSET] @ write msc1 - ldr r2, =CFG_MSC1_VAL + ldr r2, =CONFIG_SYS_MSC1_VAL str r2, [r1, #MSC1_OFFSET] ldr r2, [r1, #MSC1_OFFSET] @ write msc2 - ldr r2, =CFG_MSC2_VAL + ldr r2, =CONFIG_SYS_MSC2_VAL str r2, [r1, #MSC2_OFFSET] ldr r2, [r1, #MSC2_OFFSET] @ Step 2b @ write mecr - ldr r2, =CFG_MECR_VAL + ldr r2, =CONFIG_SYS_MECR_VAL str r2, [r1, #MECR_OFFSET] @ write mcmem0 - ldr r2, =CFG_MCMEM0_VAL + ldr r2, =CONFIG_SYS_MCMEM0_VAL str r2, [r1, #MCMEM0_OFFSET] @ write mcmem1 - ldr r2, =CFG_MCMEM1_VAL + ldr r2, =CONFIG_SYS_MCMEM1_VAL str r2, [r1, #MCMEM1_OFFSET] @ write mcatt0 - ldr r2, =CFG_MCATT0_VAL + ldr r2, =CONFIG_SYS_MCATT0_VAL str r2, [r1, #MCATT0_OFFSET] @ write mcatt1 - ldr r2, =CFG_MCATT1_VAL + ldr r2, =CONFIG_SYS_MCATT1_VAL str r2, [r1, #MCATT1_OFFSET] @ write mcio0 - ldr r2, =CFG_MCIO0_VAL + ldr r2, =CONFIG_SYS_MCIO0_VAL str r2, [r1, #MCIO0_OFFSET] @ write mcio1 - ldr r2, =CFG_MCIO1_VAL + ldr r2, =CONFIG_SYS_MCIO1_VAL str r2, [r1, #MCIO1_OFFSET] /*SET_LED 3 */ @@ -229,14 +229,14 @@ mem_init: @ Step 2c @ fly-by-dma is defeatured on this part @ write flycnfg - @ldr r2, =CFG_FLYCNFG_VAL + @ldr r2, =CONFIG_SYS_FLYCNFG_VAL @str r2, [r1, #FLYCNFG_OFFSET] /* FIXME Does this sequence really make sense */ #ifdef REDBOOT_WAY @ Step 2d @ get the mdrefr settings - ldr r3, =CFG_MDREFR_VAL + ldr r3, =CONFIG_SYS_MDREFR_VAL @ extract DRI field (we need a valid DRI field) @ @@ -319,7 +319,7 @@ mem_init: #else @ Step 2d @ get the mdrefr settings - ldr r3, =CFG_MDREFR_VAL + ldr r3, =CONFIG_SYS_MDREFR_VAL @ write back mdrefr @ @@ -363,7 +363,7 @@ mem_init: @ Step 4d @ fetch platform value of mdcnfg @ - ldr r2, =CFG_MDCNFG_VAL + ldr r2, =CONFIG_SYS_MDCNFG_VAL @ disable all sdram banks @ @@ -400,7 +400,7 @@ mem_init: @ Access memory *not yet enabled* for CBR refresh cycles (8) @ - CBR is generated for all banks - ldr r2, =CFG_DRAM_BASE + ldr r2, =CONFIG_SYS_DRAM_BASE str r2, [r2] str r2, [r2] str r2, [r2] @@ -430,7 +430,7 @@ mem_init: @ Step 4h @ write mdmrs @ - ldr r2, =CFG_MDMRS_VAL + ldr r2, =CONFIG_SYS_MDMRS_VAL str r2, [r1, #MDMRS_OFFSET] @ Done Memory Init @@ -449,7 +449,7 @@ mem_init: @ Set interrupt mask register @ - ldr r1, =CFG_ICMR_VAL + ldr r1, =CONFIG_SYS_ICMR_VAL ldr r2, =ICMR str r1, [r2] @@ -465,7 +465,7 @@ mem_init: @ set core clocks @ - ldr r2, =CFG_CCCR_VAL + ldr r2, =CONFIG_SYS_CCCR_VAL ldr r1, =CCCR str r2, [r1] @@ -488,7 +488,7 @@ mem_init: @ Turn on needed clocks @ ldr r1, =CKEN - ldr r2, =CFG_CKEN_VAL + ldr r2, =CONFIG_SYS_CKEN_VAL str r2, [r1] /*SET_LED 7 */ |