summaryrefslogtreecommitdiff
path: root/board/compulab/cm_fx6/spl.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/compulab/cm_fx6/spl.c')
-rw-r--r--board/compulab/cm_fx6/spl.c366
1 files changed, 366 insertions, 0 deletions
diff --git a/board/compulab/cm_fx6/spl.c b/board/compulab/cm_fx6/spl.c
new file mode 100644
index 0000000000..3948ba23ae
--- /dev/null
+++ b/board/compulab/cm_fx6/spl.c
@@ -0,0 +1,366 @@
+/*
+ * SPL specific code for Compulab CM-FX6 board
+ *
+ * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
+ *
+ * Author: Nikita Kiryanov <nikita@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/mx6-ddr.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <fsl_esdhc.h>
+#include "common.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+enum ddr_config {
+ DDR_16BIT_256MB,
+ DDR_32BIT_512MB,
+ DDR_32BIT_1GB,
+ DDR_64BIT_1GB,
+ DDR_64BIT_2GB,
+ DDR_64BIT_4GB,
+ DDR_UNKNOWN,
+};
+
+/*
+ * Below DRAM_RESET[DDR_SEL] = 0 which is incorrect according to
+ * Freescale QRM, but this is exactly the value used by the automatic
+ * calibration script and it works also in all our tests, so we leave
+ * it as is at this point.
+ */
+#define CM_FX6_DDR_IOMUX_CFG \
+ .dram_sdqs0 = 0x00000038, \
+ .dram_sdqs1 = 0x00000038, \
+ .dram_sdqs2 = 0x00000038, \
+ .dram_sdqs3 = 0x00000038, \
+ .dram_sdqs4 = 0x00000038, \
+ .dram_sdqs5 = 0x00000038, \
+ .dram_sdqs6 = 0x00000038, \
+ .dram_sdqs7 = 0x00000038, \
+ .dram_dqm0 = 0x00000038, \
+ .dram_dqm1 = 0x00000038, \
+ .dram_dqm2 = 0x00000038, \
+ .dram_dqm3 = 0x00000038, \
+ .dram_dqm4 = 0x00000038, \
+ .dram_dqm5 = 0x00000038, \
+ .dram_dqm6 = 0x00000038, \
+ .dram_dqm7 = 0x00000038, \
+ .dram_cas = 0x00000038, \
+ .dram_ras = 0x00000038, \
+ .dram_sdclk_0 = 0x00000038, \
+ .dram_sdclk_1 = 0x00000038, \
+ .dram_sdcke0 = 0x00003000, \
+ .dram_sdcke1 = 0x00003000, \
+ .dram_reset = 0x00000038, \
+ .dram_sdba2 = 0x00000000, \
+ .dram_sdodt0 = 0x00000038, \
+ .dram_sdodt1 = 0x00000038,
+
+#define CM_FX6_GPR_IOMUX_CFG \
+ .grp_b0ds = 0x00000038, \
+ .grp_b1ds = 0x00000038, \
+ .grp_b2ds = 0x00000038, \
+ .grp_b3ds = 0x00000038, \
+ .grp_b4ds = 0x00000038, \
+ .grp_b5ds = 0x00000038, \
+ .grp_b6ds = 0x00000038, \
+ .grp_b7ds = 0x00000038, \
+ .grp_addds = 0x00000038, \
+ .grp_ddrmode_ctl = 0x00020000, \
+ .grp_ddrpke = 0x00000000, \
+ .grp_ddrmode = 0x00020000, \
+ .grp_ctlds = 0x00000038, \
+ .grp_ddr_type = 0x000C0000,
+
+static struct mx6sdl_iomux_ddr_regs ddr_iomux_s = { CM_FX6_DDR_IOMUX_CFG };
+static struct mx6sdl_iomux_grp_regs grp_iomux_s = { CM_FX6_GPR_IOMUX_CFG };
+static struct mx6dq_iomux_ddr_regs ddr_iomux_q = { CM_FX6_DDR_IOMUX_CFG };
+static struct mx6dq_iomux_grp_regs grp_iomux_q = { CM_FX6_GPR_IOMUX_CFG };
+
+static struct mx6_mmdc_calibration cm_fx6_calib_s = {
+ .p0_mpwldectrl0 = 0x005B0061,
+ .p0_mpwldectrl1 = 0x004F0055,
+ .p0_mpdgctrl0 = 0x0314030C,
+ .p0_mpdgctrl1 = 0x025C0268,
+ .p0_mprddlctl = 0x42464646,
+ .p0_mpwrdlctl = 0x36322C34,
+};
+
+static struct mx6_ddr_sysinfo cm_fx6_sysinfo_s = {
+ .cs1_mirror = 1,
+ .cs_density = 16,
+ .bi_on = 1,
+ .rtt_nom = 1,
+ .rtt_wr = 0,
+ .ralat = 5,
+ .walat = 1,
+ .mif3_mode = 3,
+ .rst_to_cke = 0x23,
+ .sde_to_rst = 0x10,
+};
+
+static struct mx6_ddr3_cfg cm_fx6_ddr3_cfg_s = {
+ .mem_speed = 800,
+ .density = 4,
+ .rowaddr = 14,
+ .coladdr = 10,
+ .pagesz = 2,
+ .trcd = 1800,
+ .trcmin = 5200,
+ .trasmin = 3600,
+ .SRT = 0,
+};
+
+static void spl_mx6s_dram_init(enum ddr_config dram_config, bool reset)
+{
+ if (reset)
+ ((struct mmdc_p_regs *)MX6_MMDC_P0_MDCTL)->mdmisc = 2;
+
+ switch (dram_config) {
+ case DDR_16BIT_256MB:
+ cm_fx6_sysinfo_s.dsize = 0;
+ cm_fx6_sysinfo_s.ncs = 1;
+ break;
+ case DDR_32BIT_512MB:
+ cm_fx6_sysinfo_s.dsize = 1;
+ cm_fx6_sysinfo_s.ncs = 1;
+ break;
+ case DDR_32BIT_1GB:
+ cm_fx6_sysinfo_s.dsize = 1;
+ cm_fx6_sysinfo_s.ncs = 2;
+ break;
+ default:
+ puts("Tried to setup invalid DDR configuration\n");
+ hang();
+ }
+
+ mx6_dram_cfg(&cm_fx6_sysinfo_s, &cm_fx6_calib_s, &cm_fx6_ddr3_cfg_s);
+ udelay(100);
+}
+
+static struct mx6_mmdc_calibration cm_fx6_calib_q = {
+ .p0_mpwldectrl0 = 0x00630068,
+ .p0_mpwldectrl1 = 0x0068005D,
+ .p0_mpdgctrl0 = 0x04140428,
+ .p0_mpdgctrl1 = 0x037C037C,
+ .p0_mprddlctl = 0x3C30303A,
+ .p0_mpwrdlctl = 0x3A344038,
+ .p1_mpwldectrl0 = 0x0035004C,
+ .p1_mpwldectrl1 = 0x00170026,
+ .p1_mpdgctrl0 = 0x0374037C,
+ .p1_mpdgctrl1 = 0x0350032C,
+ .p1_mprddlctl = 0x30322A3C,
+ .p1_mpwrdlctl = 0x48304A3E,
+};
+
+static struct mx6_ddr_sysinfo cm_fx6_sysinfo_q = {
+ .cs_density = 16,
+ .cs1_mirror = 1,
+ .bi_on = 1,
+ .rtt_nom = 1,
+ .rtt_wr = 0,
+ .ralat = 5,
+ .walat = 1,
+ .mif3_mode = 3,
+ .rst_to_cke = 0x23,
+ .sde_to_rst = 0x10,
+};
+
+static struct mx6_ddr3_cfg cm_fx6_ddr3_cfg_q = {
+ .mem_speed = 1066,
+ .density = 4,
+ .rowaddr = 14,
+ .coladdr = 10,
+ .pagesz = 2,
+ .trcd = 1324,
+ .trcmin = 59500,
+ .trasmin = 9750,
+ .SRT = 0,
+};
+
+static void spl_mx6q_dram_init(enum ddr_config dram_config, bool reset)
+{
+ if (reset)
+ ((struct mmdc_p_regs *)MX6_MMDC_P0_MDCTL)->mdmisc = 2;
+
+ cm_fx6_ddr3_cfg_q.rowaddr = 14;
+ switch (dram_config) {
+ case DDR_16BIT_256MB:
+ cm_fx6_sysinfo_q.dsize = 0;
+ cm_fx6_sysinfo_q.ncs = 1;
+ break;
+ case DDR_32BIT_512MB:
+ cm_fx6_sysinfo_q.dsize = 1;
+ cm_fx6_sysinfo_q.ncs = 1;
+ break;
+ case DDR_64BIT_1GB:
+ cm_fx6_sysinfo_q.dsize = 2;
+ cm_fx6_sysinfo_q.ncs = 1;
+ break;
+ case DDR_64BIT_2GB:
+ cm_fx6_sysinfo_q.dsize = 2;
+ cm_fx6_sysinfo_q.ncs = 2;
+ break;
+ case DDR_64BIT_4GB:
+ cm_fx6_sysinfo_q.dsize = 2;
+ cm_fx6_sysinfo_q.ncs = 2;
+ cm_fx6_ddr3_cfg_q.rowaddr = 15;
+ break;
+ default:
+ puts("Tried to setup invalid DDR configuration\n");
+ hang();
+ }
+
+ mx6_dram_cfg(&cm_fx6_sysinfo_q, &cm_fx6_calib_q, &cm_fx6_ddr3_cfg_q);
+ udelay(100);
+}
+
+static int cm_fx6_spl_dram_init(void)
+{
+ unsigned long bank1_size, bank2_size;
+
+ switch (get_cpu_type()) {
+ case MXC_CPU_MX6SOLO:
+ mx6sdl_dram_iocfg(64, &ddr_iomux_s, &grp_iomux_s);
+
+ spl_mx6s_dram_init(DDR_32BIT_1GB, false);
+ bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000);
+ if (bank1_size == 0x40000000)
+ return 0;
+
+ if (bank1_size == 0x20000000) {
+ spl_mx6s_dram_init(DDR_32BIT_512MB, true);
+ return 0;
+ }
+
+ spl_mx6s_dram_init(DDR_16BIT_256MB, true);
+ bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000);
+ if (bank1_size == 0x10000000)
+ return 0;
+
+ break;
+ case MXC_CPU_MX6D:
+ case MXC_CPU_MX6Q:
+ mx6dq_dram_iocfg(64, &ddr_iomux_q, &grp_iomux_q);
+
+ spl_mx6q_dram_init(DDR_64BIT_4GB, false);
+ bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000);
+ if (bank1_size == 0x80000000)
+ return 0;
+
+ if (bank1_size == 0x40000000) {
+ bank2_size = get_ram_size((long int *)PHYS_SDRAM_2,
+ 0x80000000);
+ if (bank2_size == 0x40000000) {
+ /* Don't do a full reset here */
+ spl_mx6q_dram_init(DDR_64BIT_2GB, false);
+ } else {
+ spl_mx6q_dram_init(DDR_64BIT_1GB, true);
+ }
+
+ return 0;
+ }
+
+ spl_mx6q_dram_init(DDR_32BIT_512MB, true);
+ bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000);
+ if (bank1_size == 0x20000000)
+ return 0;
+
+ spl_mx6q_dram_init(DDR_16BIT_256MB, true);
+ bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000);
+ if (bank1_size == 0x10000000)
+ return 0;
+
+ break;
+ }
+
+ return -1;
+}
+
+static iomux_v3_cfg_t const uart4_pads[] = {
+ IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+};
+
+static void cm_fx6_setup_uart(void)
+{
+ SETUP_IOMUX_PADS(uart4_pads);
+ enable_uart_clk(1);
+}
+
+#ifdef CONFIG_SPL_SPI_SUPPORT
+static void cm_fx6_setup_ecspi(void)
+{
+ cm_fx6_set_ecspi_iomux();
+ enable_cspi_clock(1, 0);
+}
+#else
+static void cm_fx6_setup_ecspi(void) { }
+#endif
+
+void board_init_f(ulong dummy)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ gd = &gdata;
+ /*
+ * We don't use DMA in SPL, but we do need it in U-Boot. U-Boot
+ * initializes DMA very early (before all board code), so the only
+ * opportunity we have to initialize APBHDMA clocks is in SPL.
+ */
+ setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
+ enable_usdhc_clk(1, 2);
+
+ arch_cpu_init();
+ timer_init();
+ cm_fx6_setup_ecspi();
+ cm_fx6_setup_uart();
+ get_clocks();
+ preloader_console_init();
+ gpio_direction_output(CM_FX6_GREEN_LED, 1);
+ if (cm_fx6_spl_dram_init()) {
+ puts("!!!ERROR!!! DRAM detection failed!!!\n");
+ hang();
+ }
+
+ memset(__bss_start, 0, __bss_end - __bss_start);
+ board_init_r(NULL, 0);
+}
+
+void spl_board_init(void)
+{
+ u32 boot_device = spl_boot_device();
+
+ if (boot_device == BOOT_DEVICE_SPI)
+ puts("Booting from SPI flash\n");
+ else if (boot_device == BOOT_DEVICE_MMC1)
+ puts("Booting from MMC\n");
+ else
+ puts("Unknown boot device\n");
+}
+
+#ifdef CONFIG_SPL_MMC_SUPPORT
+static struct fsl_esdhc_cfg usdhc_cfg = {
+ .esdhc_base = USDHC3_BASE_ADDR,
+ .max_bus_width = 4,
+};
+
+int board_mmc_init(bd_t *bis)
+{
+ cm_fx6_set_usdhc_iomux();
+
+ usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+
+ return fsl_esdhc_initialize(bis, &usdhc_cfg);
+}
+#endif