summaryrefslogtreecommitdiff
path: root/board/cm5200/cmd_cm5200.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/cm5200/cmd_cm5200.c')
-rw-r--r--board/cm5200/cmd_cm5200.c402
1 files changed, 0 insertions, 402 deletions
diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c
deleted file mode 100644
index 60097dc8c7..0000000000
--- a/board/cm5200/cmd_cm5200.c
+++ /dev/null
@@ -1,402 +0,0 @@
-/*
- * (C) Copyright 2007 Markus Kappeler <markus.kappeler@objectxp.com>
- *
- * Adapted for U-Boot 1.2 by Piotr Kruszynski <ppk@semihalf.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <i2c.h>
-#include <usb.h>
-
-#ifdef CONFIG_CMD_BSP
-
-static int do_usb_test(char * const argv[])
-{
- int i;
- static int usb_stor_curr_dev = -1; /* current device */
-
- printf("Starting USB Test\n"
- "Please insert USB Memmory Stick\n\n"
- "Please press any key to start\n\n");
- getc();
-
- usb_stop();
- printf("(Re)start USB...\n");
- i = usb_init();
-#ifdef CONFIG_USB_STORAGE
- /* try to recognize storage devices immediately */
- if (i >= 0)
- usb_stor_curr_dev = usb_stor_scan(1);
-#endif /* CONFIG_USB_STORAGE */
- if (usb_stor_curr_dev >= 0)
- printf("Found USB Storage Dev continue with Test...\n");
- else {
- printf("No USB Storage Device detected.. Stop Test\n");
- return 1;
- }
-
- usb_stor_info();
-
- printf("stopping USB..\n");
- usb_stop();
-
- return 0;
-}
-
-static int do_led_test(char * const argv[])
-{
- int i = 0;
- struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT;
-
- printf("Starting LED Test\n"
- "Please set Switch S500 all off\n\n"
- "Please press any key to start\n\n");
- getc();
-
- /* configure timer 2-3 for simple GPIO output High */
- gpt->gpt2.emsr |= 0x00000034;
- gpt->gpt3.emsr |= 0x00000034;
-
- (*(vu_long *)MPC5XXX_WU_GPIO_ENABLE) |= 0x80000000;
- (*(vu_long *)MPC5XXX_WU_GPIO_DIR) |= 0x80000000;
- printf("Please press any key to stop\n\n");
- while (!tstc()) {
- if (i == 1) {
- (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) |= 0x80000000;
- gpt->gpt2.emsr &= ~0x00000010;
- gpt->gpt3.emsr &= ~0x00000010;
- } else if (i == 2) {
- (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) &= ~0x80000000;
- gpt->gpt2.emsr &= ~0x00000010;
- gpt->gpt3.emsr |= 0x00000010;
- } else if (i >= 3) {
- (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) &= ~0x80000000;
- gpt->gpt3.emsr &= ~0x00000010;
- gpt->gpt2.emsr |= 0x00000010;
- i = 0;
- }
- i++;
- udelay(200000);
- }
- getc();
-
- (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) |= 0x80000000;
- gpt->gpt2.emsr |= 0x00000010;
- gpt->gpt3.emsr |= 0x00000010;
-
- return 0;
-}
-
-static int do_rs232_test(char * const argv[])
-{
- int error_status = 0;
- struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
- struct mpc5xxx_psc *psc1 = (struct mpc5xxx_psc *)MPC5XXX_PSC1;
-
- /* Configure PSC 2-3-6 as GPIO */
- gpio->port_config &= 0xFF0FF80F;
-
- switch (simple_strtoul(argv[2], NULL, 10)) {
- case 1:
- /* check RTS <-> CTS loop */
- /* set rts to 0 */
- printf("Uart 1 test: RX TX tested by using U-Boot\n"
- "Please connect RTS with CTS on Uart1 plug\n\n"
- "Press any key to start\n\n");
- getc();
-
- psc1->op1 |= 0x01;
-
- /* wait some time before requesting status */
- udelay(10);
-
- /* check status at cts */
- if ((psc1->ip & 0x01) != 0) {
- error_status = 3;
- printf("%s: failure at rs232_1, cts status is %d "
- "(should be 0)\n",
- __FUNCTION__, (psc1->ip & 0x01));
- }
-
- /* set rts to 1 */
- psc1->op0 |= 0x01;
-
- /* wait some time before requesting status */
- udelay(10);
-
- /* check status at cts */
- if ((psc1->ip & 0x01) != 1) {
- error_status = 3;
- printf("%s: failure at rs232_1, cts status is %d "
- "(should be 1)\n",
- __FUNCTION__, (psc1->ip & 0x01));
- }
- break;
- case 2:
- /* set PSC2_0, PSC2_2 as output and PSC2_1, PSC2_3 as input */
- printf("Uart 2 test: Please use RS232 Loopback plug on UART2\n"
- "\nPress any key to start\n\n");
- getc();
-
- gpio->simple_gpioe &= ~(0x000000F0);
- gpio->simple_gpioe |= 0x000000F0;
- gpio->simple_ddr &= ~(0x000000F0);
- gpio->simple_ddr |= 0x00000050;
-
- /* check TXD <-> RXD loop */
- /* set TXD to 1 */
- gpio->simple_dvo |= (1 << 4);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if ((gpio->simple_ival & 0x00000020) != 0x00000020) {
- error_status = 2;
- printf("%s: failure at rs232_2, rxd status is %d "
- "(should be 1)\n", __FUNCTION__,
- (gpio->simple_ival & 0x00000020) >> 5);
- }
-
- /* set TXD to 0 */
- gpio->simple_dvo &= ~(1 << 4);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if ((gpio->simple_ival & 0x00000020) != 0x00000000) {
- error_status = 2;
- printf("%s: failure at rs232_2, rxd status is %d "
- "(should be 0)\n", __FUNCTION__,
- (gpio->simple_ival & 0x00000020) >> 5);
- }
-
- /* check RTS <-> CTS loop */
- /* set RTS to 1 */
- gpio->simple_dvo |= (1 << 6);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if ((gpio->simple_ival & 0x00000080) != 0x00000080) {
- error_status = 3;
- printf("%s: failure at rs232_2, cts status is %d "
- "(should be 1)\n", __FUNCTION__,
- (gpio->simple_ival & 0x00000080) >> 7);
- }
-
- /* set RTS to 0 */
- gpio->simple_dvo &= ~(1 << 6);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if ((gpio->simple_ival & 0x00000080) != 0x00000000) {
- error_status = 3;
- printf("%s: failure at rs232_2, cts status is %d "
- "(should be 0)\n", __FUNCTION__,
- (gpio->simple_ival & 0x00000080) >> 7);
- }
- break;
- case 3:
- /* set PSC3_0, PSC3_2 as output and PSC3_1, PSC3_3 as input */
- printf("Uart 3 test: Please use RS232 Loopback plug on UART2\n"
- "\nPress any key to start\n\n");
- getc();
-
- gpio->simple_gpioe &= ~(0x00000F00);
- gpio->simple_gpioe |= 0x00000F00;
-
- gpio->simple_ddr &= ~(0x00000F00);
- gpio->simple_ddr |= 0x00000500;
-
- /* check TXD <-> RXD loop */
- /* set TXD to 1 */
- gpio->simple_dvo |= (1 << 8);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if ((gpio->simple_ival & 0x00000200) != 0x00000200) {
- error_status = 2;
- printf("%s: failure at rs232_3, rxd status is %d "
- "(should be 1)\n", __FUNCTION__,
- (gpio->simple_ival & 0x00000200) >> 9);
- }
-
- /* set TXD to 0 */
- gpio->simple_dvo &= ~(1 << 8);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if ((gpio->simple_ival & 0x00000200) != 0x00000000) {
- error_status = 2;
- printf("%s: failure at rs232_3, rxd status is %d "
- "(should be 0)\n", __FUNCTION__,
- (gpio->simple_ival & 0x00000200) >> 9);
- }
-
- /* check RTS <-> CTS loop */
- /* set RTS to 1 */
- gpio->simple_dvo |= (1 << 10);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if ((gpio->simple_ival & 0x00000800) != 0x00000800) {
- error_status = 3;
- printf("%s: failure at rs232_3, cts status is %d "
- "(should be 1)\n", __FUNCTION__,
- (gpio->simple_ival & 0x00000800) >> 11);
- }
-
- /* set RTS to 0 */
- gpio->simple_dvo &= ~(1 << 10);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if ((gpio->simple_ival & 0x00000800) != 0x00000000) {
- error_status = 3;
- printf("%s: failure at rs232_3, cts status is %d "
- "(should be 0)\n", __FUNCTION__,
- (gpio->simple_ival & 0x00000800) >> 11);
- }
- break;
- case 4:
- /* set PSC6_2, PSC6_3 as output and PSC6_0, PSC6_1 as input */
- printf("Uart 4 test: Please use RS232 Loopback plug on UART2\n"
- "\nPress any key to start\n\n");
- getc();
-
- gpio->simple_gpioe &= ~(0xF0000000);
- gpio->simple_gpioe |= 0x30000000;
-
- gpio->simple_ddr &= ~(0xf0000000);
- gpio->simple_ddr |= 0x30000000;
-
- (*(vu_long *)MPC5XXX_WU_GPIO_ENABLE) |= 0x30000000;
- (*(vu_long *)MPC5XXX_WU_GPIO_DIR) &= ~(0x30000000);
-
- /* check TXD <-> RXD loop */
- /* set TXD to 1 */
- gpio->simple_dvo |= (1 << 28);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) !=
- 0x10000000) {
- error_status = 2;
- printf("%s: failure at rs232_4, rxd status is %lu "
- "(should be 1)\n", __FUNCTION__,
- ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
- 0x10000000) >> 28);
- }
-
- /* set TXD to 0 */
- gpio->simple_dvo &= ~(1 << 28);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) !=
- 0x00000000) {
- error_status = 2;
- printf("%s: failure at rs232_4, rxd status is %lu "
- "(should be 0)\n", __FUNCTION__,
- ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
- 0x10000000) >> 28);
- }
-
- /* check RTS <-> CTS loop */
- /* set RTS to 1 */
- gpio->simple_dvo |= (1 << 29);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) !=
- 0x20000000) {
- error_status = 3;
- printf("%s: failure at rs232_4, cts status is %lu "
- "(should be 1)\n", __FUNCTION__,
- ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
- 0x20000000) >> 29);
- }
-
- /* set RTS to 0 */
- gpio->simple_dvo &= ~(1 << 29);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) !=
- 0x00000000) {
- error_status = 3;
- printf("%s: failure at rs232_4, cts status is %lu "
- "(should be 0)\n", __FUNCTION__,
- ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
- 0x20000000) >> 29);
- }
- break;
- default:
- printf("%s: invalid rs232 number %s\n", __FUNCTION__, argv[2]);
- error_status = 1;
- break;
- }
- gpio->port_config |= (CONFIG_SYS_GPS_PORT_CONFIG & 0xFF0FF80F);
-
- return error_status;
-}
-
-static int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- int rcode = -1;
-
- switch (argc) {
- case 2:
- if (strncmp(argv[1], "led", 3) == 0)
- rcode = do_led_test(argv);
- else if (strncmp(argv[1], "usb", 3) == 0)
- rcode = do_usb_test(argv);
- break;
- case 3:
- if (strncmp(argv[1], "rs232", 3) == 0)
- rcode = do_rs232_test(argv);
- break;
- }
-
- switch (rcode) {
- case -1:
- printf("Usage:\n"
- "fkt { i2c | led | usb }\n"
- "fkt rs232 number\n");
- rcode = 1;
- break;
- case 0:
- printf("Test passed\n");
- break;
- default:
- printf("Test failed with code: %d\n", rcode);
- }
-
- return rcode;
-}
-
-U_BOOT_CMD(
- fkt, 4, 1, cmd_fkt,
- "Function test routines",
- "i2c\n"
- " - Test I2C communication\n"
- "fkt led\n"
- " - Test LEDs\n"
- "fkt rs232 number\n"
- " - Test RS232 (loopback plug(s) for RS232 required)\n"
- "fkt usb\n"
- " - Test USB communication"
-);
-#endif /* CONFIG_CMD_BSP */
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-04 16:58:05 +0000