summaryrefslogtreecommitdiff
path: root/board/bmw
diff options
context:
space:
mode:
Diffstat (limited to 'board/bmw')
-rw-r--r--board/bmw/early_init.S1172
1 files changed, 1172 insertions, 0 deletions
diff --git a/board/bmw/early_init.S b/board/bmw/early_init.S
new file mode 100644
index 0000000000..ec20a67a71
--- /dev/null
+++ b/board/bmw/early_init.S
@@ -0,0 +1,1172 @@
+#include <ppc_asm.tmpl>
+#include <mpc824x.h>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#define USE_V2_INIT 1 /* Jimmy Blair's initialization. */
+
+
+/*
+ * Initialize the MMU using BAT entries and hardwired TLB
+ * This obviates the need for any code in cpu_init_f which
+ * configures the BAT registers.
+*/
+#define MEMORY_MGMT_MSR_BITS (MSR_DR | MSR_IR) /* Data and Inst Relocate */
+ .global iommu_setup
+ /* Initialize IO/MMU mappings via BAT method Ch. 7,
+ * PPC Programming Reference
+ */
+iommu_setup:
+
+/* initialize the BAT registers (SPRs 528 - 543 */
+#define mtibat0u(x) mtspr 528,(x) /* SPR 528 (IBAT0U) */
+#define mtibat0l(x) mtspr 529,(x) /* SPR 529 (IBAT0L) */
+#define mtibat1u(x) mtspr 530,(x) /* SPR 530 (IBAT1U) */
+#define mtibat1l(x) mtspr 531,(x) /* SPR 531 (IBAT1L) */
+#define mtibat2u(x) mtspr 532,(x) /* SPR 532 (IBAT2U) */
+#define mtibat2l(x) mtspr 533,(x) /* SPR 533 (IBAT2L) */
+#define mtibat3u(x) mtspr 534,(x) /* SPR 534 (IBAT3U) */
+#define mtibat3l(x) mtspr 535,(x) /* SPR 535 (IBAT3L) */
+#define mtdbat0u(x) mtspr 536,(x) /* SPR 536 (DBAT0U) */
+#define mtdbat0l(x) mtspr 537,(x) /* SPR 537 (DBAT0L) */
+#define mtdbat1u(x) mtspr 538,(x) /* SPR 538 (DBAT1U) */
+#define mtdbat1l(x) mtspr 539,(x) /* SPR 539 (DBAT1L) */
+#define mtdbat2u(x) mtspr 540,(x) /* SPR 540 (DBAT2U) */
+#define mtdbat2l(x) mtspr 541,(x) /* SPR 541 (DBAT2L) */
+#define mtdbat3u(x) mtspr 542,(x) /* SPR 542 (DBAT3U) */
+#define mtdbat3l(x) mtspr 543,(x) /* SPR 543 (DBAT3L) */
+
+
+/* PowerPC processors do not necessarily initialize the BAT
+ registers on power-up or reset. So they are in an unknown
+ state. Before programming the BATs for the first time, all
+ BAT registers MUST have their Vs and Vp bits cleared in the
+ upper BAT half in order to avoid possibly having 2 BATs
+ valid and mapping the same memory region.
+
+ The reason for this is that, even with address translation
+ disabled, multiple BAT hits for an address are treated as
+ programming errors and can cause unpredictable results.
+
+ It is up to the software to make sure it never has 2 IBAT
+ mappings or 2 DBAT mappings that are valid for the same
+ addresses. It is not necessary to perform this code
+ sequence every time the BATs are programmed, only when
+ there is a possibility that there may be overlapping BAT
+ entries.
+
+ When programming the BATs in non-reset scenarios, even if
+ you are sure that your new mapping will not temporarily
+ create overlapping regions, it is still a wise idea to
+ invalidate a BAT entry by setting its upper BAT register to
+ all 0's before programming it. This will avoid having a
+ BAT marked valid that is in an unknown or transient state
+*/
+
+ addis r5,0,0x0000
+ mtibat0u(r5)
+ mtibat0l(r5)
+ mtibat1u(r5)
+ mtibat1l(r5)
+ mtibat2u(r5)
+ mtibat2l(r5)
+ mtibat3u(r5)
+ mtibat3l(r5)
+ mtdbat0u(r5)
+ mtdbat0l(r5)
+ mtdbat1u(r5)
+ mtdbat1l(r5)
+ mtdbat2u(r5)
+ mtdbat2l(r5)
+ mtdbat3u(r5)
+ mtdbat3l(r5)
+ isync
+
+/*
+ * Set up I/D BAT0
+ */
+ lis r4, CFG_DBAT0L@h
+ ori r4, r4, CFG_DBAT0L@l
+ lis r3, CFG_DBAT0U@h
+ ori r3, r3, CFG_DBAT0U@l
+
+ mtdbat0l(r4)
+ isync
+ mtdbat0u(r3)
+ isync
+ sync
+
+ lis r4, CFG_IBAT0L@h
+ ori r4, r4, CFG_IBAT0L@l
+ lis r3, CFG_IBAT0U@h
+ ori r3, r3, CFG_IBAT0U@l
+
+ isync
+ mtibat0l(r4)
+ isync
+ mtibat0u(r3)
+ isync
+
+/*
+ * Set up I/D BAT1
+ */
+ lis r4, CFG_IBAT1L@h
+ ori r4, r4, CFG_IBAT1L@l
+ lis r3, CFG_IBAT1U@h
+ ori r3, r3, CFG_IBAT1U@l
+
+ isync
+ mtibat1l(r4)
+ isync
+ mtibat1u(r3)
+ isync
+ mtdbat1l(r4)
+ isync
+ mtdbat1u(r3)
+ isync
+ sync
+
+/*
+ * Set up I/D BAT2
+ */
+ lis r4, CFG_IBAT2L@h
+ ori r4, r4, CFG_IBAT2L@l
+ lis r3, CFG_IBAT2U@h
+ ori r3, r3, CFG_IBAT2U@l
+
+ isync
+ mtibat2l(r4)
+ isync
+ mtibat2u(r3)
+ isync
+ mtdbat2l(r4)
+ isync
+ mtdbat2u(r3)
+ isync
+ sync
+
+/*
+ * Setup I/D BAT3
+ */
+ lis r4, CFG_IBAT3L@h
+ ori r4, r4, CFG_IBAT3L@l
+ lis r3, CFG_IBAT3U@h
+ ori r3, r3, CFG_IBAT3U@l
+
+ isync
+ mtibat3l(r4)
+ isync
+ mtibat3u(r3)
+ isync
+ mtdbat3l(r4)
+ isync
+ mtdbat3u(r3)
+ isync
+ sync
+
+
+/*
+ * Invalidate all 64 TLB's
+ */
+ lis r3, 0
+ mtctr r3
+ lis r5, 4
+
+tlblp:
+ tlbie r3
+ sync
+ addi r3, r3, 0x1000
+ cmplw r3, r5
+ blt tlblp
+
+ sync
+
+/*
+ * Enable Data Translation
+ */
+ lis r4, MEMORY_MGMT_MSR_BITS@h
+ ori r4, r4, MEMORY_MGMT_MSR_BITS@l
+ mfmsr r3
+ or r3, r4, r3
+ mtmsr r3
+ isync
+ sync
+
+ blr
+
+
+#ifdef USE_V2_INIT
+/* #define USER_I_CACHE_ENABLE 1*/ /* Fast rom boots */
+/* Macro for hiadjust and lo */
+#define HIADJ(arg) arg@ha
+#define HI(arg) arg@h
+#define LO(arg) arg@l
+
+#undef LOADPTR
+#define LOADPTR(reg,const32) \
+ addis reg,r0,HIADJ(const32); addi reg,reg,LO(const32)
+
+.globl early_init_f
+
+early_init_f:
+/* MPC8245/BMW CPCI System Init
+ * Jimmy Blair, Broadcom Corp, 2002.
+ */
+ mflr r11
+ /* Zero-out registers */
+
+ addis r0,r0,0
+ mtspr SPRG0,r0
+ mtspr SPRG1,r0
+ mtspr SPRG2,r0
+ mtspr SPRG3,r0
+
+ /* Set MPU/MSR to a known state. Turn on FP */
+
+ LOADPTR (r3, MSR_FP)
+ sync
+ mtmsr r3
+ isync
+
+ /* Init the floating point control/status register */
+
+ mtfsfi 7,0x0
+ mtfsfi 6,0x0
+ mtfsfi 5,0x0
+ mtfsfi 4,0x0
+ mtfsfi 3,0x0
+ mtfsfi 2,0x0
+ mtfsfi 1,0x0
+ mtfsfi 0,0x0
+ isync
+
+ /* Set MPU/MSR to a known state. Turn off FP */
+
+#if 1 /* Turn off floating point (remove to keep FP on) */
+ andi. r3, r3, 0
+ sync
+ mtmsr r3
+ isync
+#endif
+
+ /* Init the Segment registers */
+
+ andi. r3, r3, 0
+ isync
+ mtsr 0,r3
+ isync
+ mtsr 1,r3
+ isync
+ mtsr 2,r3
+ isync
+ mtsr 3,r3
+ isync
+ mtsr 4,r3
+ isync
+ mtsr 5,r3
+ isync
+ mtsr 6,r3
+ isync
+ mtsr 7,r3
+ isync
+ mtsr 8,r3
+ isync
+ mtsr 9,r3
+ isync
+ mtsr 10,r3
+ isync
+ mtsr 11,r3
+ isync
+ mtsr 12,r3
+ isync
+ mtsr 13,r3
+ isync
+ mtsr 14,r3
+ isync
+ mtsr 15,r3
+ isync
+
+ /* Turn off data and instruction cache control bits */
+
+ mfspr r3, HID0
+ isync
+ rlwinm r4, r3, 0, 18, 15 /* r4 has ICE and DCE bits cleared */
+ sync
+ isync
+ mtspr HID0, r4 /* HID0 = r4 */
+ isync
+
+ /* Get cpu type */
+
+ mfspr r28, PVR
+ rlwinm r28, r28, 16, 16, 31
+
+ /* invalidate the MPU's data/instruction caches */
+
+ lis r3, 0x0
+ cmpli 0, 0, r28, CPU_TYPE_603
+ beq cpuIs603
+ cmpli 0, 0, r28, CPU_TYPE_603E
+ beq cpuIs603
+ cmpli 0, 0, r28, CPU_TYPE_603P
+ beq cpuIs603
+ cmpli 0, 0, r28, CPU_TYPE_604R
+ bne cpuNot604R
+
+cpuIs604R:
+ lis r3, 0x0
+ mtspr HID0, r3 /* disable the caches */
+ isync
+ ori r4, r4, 0x0002 /* disable BTAC by setting bit 30 */
+
+cpuNot604R:
+ ori r3, r3, (HID0_ICFI |HID0_DCI)
+
+cpuIs603:
+ ori r3, r3, (HID0_ICE | HID0_DCE)
+ or r4, r4, r3 /* set bits */
+ sync
+ isync
+ mtspr HID0, r4 /* HID0 = r4 */
+ andc r4, r4, r3 /* clear bits */
+ isync
+ cmpli 0, 0, r28, CPU_TYPE_604
+ beq cpuIs604
+ cmpli 0, 0, r28, CPU_TYPE_604E
+ beq cpuIs604
+ cmpli 0, 0, r28, CPU_TYPE_604R
+ beq cpuIs604
+ mtspr HID0, r4
+ isync
+
+#ifdef USER_I_CACHE_ENABLE
+ b instCacheOn603
+#else
+ b cacheEnableDone
+#endif
+
+cpuIs604:
+ LOADPTR (r5, 0x1000) /* loop count, 0x1000 */
+ mtspr CTR, r5
+loopDelay:
+ nop
+ bdnz loopDelay
+ isync
+ mtspr HID0, r4
+ isync
+
+ /* turn the Instruction cache ON for faster FLASH ROM boots */
+
+#ifdef USER_I_CACHE_ENABLE
+
+ ori r4, r4, (HID0_ICE | HID0_ICFI)
+ isync /* Synchronize for ICE enable */
+ b writeReg4
+instCacheOn603:
+ ori r4, r4, (HID0_ICE | HID0_ICFI)
+ rlwinm r3, r4, 0, 21, 19 /* clear the ICFI bit */
+
+ /*
+ * The setting of the instruction cache enable (ICE) bit must be
+ * preceded by an isync instruction to prevent the cache from being
+ * enabled or disabled while an instruction access is in progress.
+ */
+ isync
+writeReg4:
+ mtspr HID0, r4 /* Enable Instr Cache & Inval cache */
+ cmpli 0, 0, r28, CPU_TYPE_604
+ beq cacheEnableDone
+ cmpli 0, 0, r28, CPU_TYPE_604E
+ beq cacheEnableDone
+
+ mtspr HID0, r3 /* using 2 consec instructions */
+ /* PPC603 recommendation */
+#endif
+cacheEnableDone:
+
+ /* Detect map A or B */
+
+ addis r5,r0, HI(CHRP_REG_ADDR)
+ addis r6,r0, HI(CHRP_REG_DATA)
+ LOADPTR (r7, KAHLUA_ID) /* Kahlua PCI controller ID */
+ LOADPTR (r8, BMC_BASE)
+
+ stwbrx r8,0,(r5)
+ lwbrx r3,0,(r6) /* Store read value to r3 */
+ cmp 0,0,r3,r7
+ beq cr0, X4_KAHLUA_START
+
+ /* It's not an 8240, is it an 8245? */
+
+ LOADPTR (r7, KAHLUA2_ID) /* Kahlua PCI controller ID */
+ cmp 0,0,r3,r7
+ beq cr0, X4_KAHLUA_START
+
+ /* Save the PCI controller type in r7 */
+ mr r7, r3
+
+ LOADPTR (r5, PREP_REG_ADDR)
+ LOADPTR (r6, PREP_REG_DATA)
+
+X4_KAHLUA_START:
+ /* MPC8245 changes begin here */
+ LOADPTR (r3, MPC107_PCI_CMD) /* PCI command reg */
+ stwbrx r3,0,r5
+ li r4, 6 /* Command register value */
+ sthbrx r4, 0, r6
+
+ LOADPTR (r3, MPC107_PCI_STAT) /* PCI status reg */
+ stwbrx r3,0,r5
+ li r4, -1 /* Write-to-clear all bits */
+ li r3, 2 /* PCI_STATUS is at +2 offset */
+ sthbrx r4, r3, r6
+
+ /*-------PROC_INT1_ADR */
+
+ LOADPTR (r3, PROC_INT1_ADR) /* Processor I/F Config 1 reg. */
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0xff141b98)
+ stwbrx r4,0,r6
+
+ /*-------PROC_INT2_ADR */
+
+ LOADPTR (r3, PROC_INT2_ADR) /* Processor I/F Config 2 reg. */
+ stwbrx r3,0,r5
+ lis r4, 0x2000 /* Flush PCI config writes */
+ stwbrx r4,0,r6
+
+ LOADPTR (r9, KAHLUA2_ID)
+ cmpl 0, 0, r7, r9
+ bne L1not8245
+
+ /* MIOCR1 -- turn on bit for DLL delay */
+
+ LOADPTR (r3, MIOCR1_ADR_X)
+ stwbrx r3,0,r5
+ li r4, 0x04
+ stb r4, MIOCR1_SHIFT(r6)
+
+ /* For the MPC8245, set register 77 to %00100000 (see Errata #15) */
+ /* SDRAM_CLK_DEL (0x77)*/
+
+ LOADPTR (r3, MIOCR2_ADR_X)
+ stwbrx r3,0,r5
+ li r4, 0x10
+ stb r4, MIOCR2_SHIFT(r6)
+
+ /* PMCR2 -- set PCI hold delay to <10>b for 33 MHz */
+
+ LOADPTR (r3, PMCR2_ADR_X)
+ stwbrx r3,0,r5
+ li r4, 0x20
+ stb r4, PMCR2_SHIFT(r6)
+
+ /* Initialize EUMBBAR early since 8245 has internal UART in EUMB */
+
+ LOADPTR (r3, EUMBBAR)
+ stwbrx r3,0,r5
+ LOADPTR (r4, CFG_EUMB_ADDR)
+ stwbrx r4,0,r6
+
+L1not8245:
+
+ /* Toggle the DLL reset bit in AMBOR */
+
+ LOADPTR (r3, AMBOR)
+ stwbrx r3,0,r5
+ lbz r4, 0(r6)
+
+ andi. r4, r4, 0xdf
+ stb r4, 0(r6) /* Clear DLL_RESET */
+ sync
+
+ ori r4, r4, 0x20 /* Set DLL_RESET */
+ stb r4, 0(r6)
+ sync
+
+ andi. r4, r4, 0xdf
+ stb r4, 0(r6) /* Clear DLL_RESET */
+
+
+ /* Enable RCS2, use supplied timings */
+ LOADPTR (r3, ERCR1)
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0x80408000)
+ stwbrx r4,0,r6
+
+ /* Disable RCS3 parameters */
+ LOADPTR (r3, ERCR2)
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0x00000000)
+ stwbrx r4,0,r6
+
+ /* RCS3 at 0x70000000, 64KBytes */
+ LOADPTR (r3, ERCR2)
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0x00000004)
+ stwbrx r4,0,r6
+
+ /*-------MCCR1 */
+
+#ifdef INCLUDE_ECC
+#define MC_ECC 1
+#else /* INCLUDE_ECC */
+#define MC_ECC 0
+#endif /* INCLUDE_ECC */
+
+#define MC1_ROMNAL 8 /* 0-15 */
+#define MC1_ROMFAL 11 /* 0-31 */
+#define MC1_DBUS_SIZE 0 /* 0-3, read only */
+#define MC1_BURST 0 /* 0-1 */
+#define MC1_MEMGO 0 /* 0-1 */
+#define MC1_SREN 1 /* 0-1 */
+#define MC1_RAM_TYPE 0 /* 0-1 */
+#define MC1_PCKEN MC_ECC /* 0-1 */
+#define MC1_BANKBITS 0x5555 /* 2 bits/bank 7-0 */
+
+ LOADPTR (r3, MEM_CONT1_ADR) /* Set MCCR1 (F0) */
+ stwbrx r3,0,r5
+ LOADPTR(r4, \
+ MC1_ROMNAL << 28 | MC1_ROMFAL << 23 | \
+ MC1_DBUS_SIZE << 21 | MC1_BURST << 20 | \
+ MC1_MEMGO << 19 | MC1_SREN << 18 | \
+ MC1_RAM_TYPE << 17 | MC1_PCKEN << 16 )
+ li r3, MC1_BANKBITS
+ cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
+ bne BankBitsAdd
+ cmpli 0, 0, r3, 0x5555
+ beq K2BankBitsHack /* On 8245, 5555 ==> 0 */
+BankBitsAdd:
+ ori r4, r3, 0
+K2BankBitsHack:
+ stwbrx r4, 0, r6
+
+ /*------- MCCR2 */
+
+#define MC2_TS_WAIT_TIMER 0 /* 0-7 */
+#define MC2_ASRISE 8 /* 0-15 */
+#define MC2_ASFALL 4 /* 0-15 */
+#define MC2_INLINE_PAR_NOT_ECC 0 /* 0-1 */
+#define MC2_WRITE_PARITY_CHK_EN MC_ECC /* 0-1 */
+#define MC2_INLRD_PARECC_CHK_EN MC_ECC /* 0-1 */
+#define MC2_ECC_EN 0 /* 0-1 */
+#define MC2_EDO 0 /* 0-1 */
+/*
+* N.B. This refresh interval looks good up to 85 MHz with Hynix SDRAM.
+* May need to be decreased for 100 MHz
+*/
+#define MC2_REFINT 0x3a5 /* 0-0x3fff */
+#define MC2_RSV_PG 0 /* 0-1 */
+#define MC2_RMW_PAR MC_ECC /* 0-1 */
+
+ LOADPTR (r3, MEM_CONT2_ADR) /* Set MCCR2 (F4) */
+ stwbrx r3,0,r5
+ LOADPTR(r4, \
+ MC2_TS_WAIT_TIMER << 29 | MC2_ASRISE << 25 | \
+ MC2_ASFALL << 21 | MC2_INLINE_PAR_NOT_ECC << 20 | \
+ MC2_WRITE_PARITY_CHK_EN << 19 | \
+ MC2_INLRD_PARECC_CHK_EN << 18 | \
+ MC2_ECC_EN << 17 | MC2_EDO << 16 | \
+ MC2_REFINT << 2 | MC2_RSV_PG << 1 | MC2_RMW_PAR)
+ cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
+ bne notK2
+ /* clear Kahlua2 reserved bits */
+ LOADPTR (r3, 0xfffcffff)
+ and r4, r4, r3
+notK2:
+ stwbrx r4,0,r6
+
+ /*------- MCCR3 */
+
+#define MC_BSTOPRE 0x079 /* 0-0x7ff */
+
+#define MC3_BSTOPRE_U (MC_BSTOPRE >> 4 & 0xf)
+#define MC3_REFREC 8 /* 0-15 */
+#define MC3_RDLAT (4+MC_ECC) /* 0-15 */
+#define MC3_CPX 0 /* 0-1 */
+#define MC3_RAS6P 0 /* 0-15 */
+#define MC3_CAS5 0 /* 0-7 */
+#define MC3_CP4 0 /* 0-7 */
+#define MC3_CAS3 0 /* 0-7 */
+#define MC3_RCD2 0 /* 0-7 */
+#define MC3_RP1 0 /* 0-7 */
+
+ LOADPTR (r3, MEM_CONT3_ADR) /* Set MCCR3 (F8) */
+ stwbrx r3,0,r5
+ LOADPTR(r4, \
+ MC3_BSTOPRE_U << 28 | MC3_REFREC << 24 | \
+ MC3_RDLAT << 20 | MC3_CPX << 19 | \
+ MC3_RAS6P << 15 | MC3_CAS5 << 12 | MC3_CP4 << 9 | \
+ MC3_CAS3 << 6 | MC3_RCD2 << 3 | MC3_RP1)
+ cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
+ bne notK2b
+ /* clear Kahlua2 reserved bits */
+ LOADPTR (r3, 0xff000000)
+ and r4, r4, r3
+notK2b:
+ stwbrx r4,0,r6
+
+ /*------- MCCR4 */
+
+#define MC4_PRETOACT 3 /* 0-15 */
+#define MC4_ACTOPRE 5 /* 0-15 */
+#define MC4_WMODE 0 /* 0-1 */
+#define MC4_INLINE MC_ECC /* 0-1 */
+#define MC4_REGISTERED (1-MC_ECC) /* 0-1 */
+#define MC4_BSTOPRE_UU (MC_BSTOPRE >> 8 & 3)
+#define MC4_REGDIMM 0 /* 0-1 */
+#define MC4_SDMODE_CAS 2 /* 0-7 */
+#define MC4_DBUS_RCS1 1 /* 0-1, 8-bit */
+#define MC4_SDMODE_WRAP 0 /* 0-1 */
+#define MC4_SDMODE_BURST 2 /* 0-7 */
+#define MC4_ACTORW 3 /* 0-15 */
+#define MC4_BSTOPRE_L (MC_BSTOPRE & 0xf)
+
+ LOADPTR (r3, MEM_CONT4_ADR) /* Set MCCR4 (FC) */
+ stwbrx r3,0,r5
+ LOADPTR(r4, \
+ MC4_PRETOACT << 28 | MC4_ACTOPRE << 24 | \
+ MC4_WMODE << 23 | MC4_INLINE << 22 | \
+ MC4_REGISTERED << 20 | MC4_BSTOPRE_UU << 18 | \
+ MC4_DBUS_RCS1 << 17 | \
+ MC4_REGDIMM << 15 | MC4_SDMODE_CAS << 12 | \
+ MC4_SDMODE_WRAP << 11 | MC4_SDMODE_BURST << 8 | \
+ MC4_ACTORW << 4 | MC4_BSTOPRE_L)
+ cmpl 0, 0, r7, r9 /* Check for Kahlua 2 */
+ bne notK2c
+ /* Turn on Kahlua2 extended ROM space */
+ LOADPTR (r3, 0x00200000)
+ or r4, r4, r3
+notK2c:
+ stwbrx r4,0,r6
+
+#ifdef INCLUDE_ECC
+ /*------- MEM_ERREN1 */
+
+ LOADPTR (r3, MEM_ERREN1_ADR) /* Set MEM_ERREN1 (c0) */
+ stwbrx r3,0,r5
+ lwbrx r4,0,r6
+ ori r4,r4,4 /* Set MEM_PERR_EN */
+ stwbrx r4,0,r6
+#endif /* INCLUDE_ECC */
+
+ /*------- MSAR/MEAR */
+
+ LOADPTR (r3, MEM_START1_ADR) /* Set MSAR1 (80) */
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0xc0804000)
+ stwbrx r4,0,r6
+
+ LOADPTR (r3, MEM_START2_ADR) /* Set MSAR2 (84) */
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0xc0804000)
+ stwbrx r4,0,r6
+
+ LOADPTR (r3, XMEM_START1_ADR) /* Set MESAR1 (88) */
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0x00000000)
+ stwbrx r4,0,r6
+
+ LOADPTR (r3, XMEM_START2_ADR) /* Set MESAR2 (8c) */
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0x01010101)
+ stwbrx r4,0,r6
+
+ LOADPTR (r3, MEM_END1_ADR) /* Set MEAR1 (90) */
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0xffbf7f3f)
+ stwbrx r4,0,r6
+
+ LOADPTR (r3, MEM_END2_ADR) /* Set MEAR2 (94) */
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0xffbf7f3f)
+ stwbrx r4,0,r6
+
+ LOADPTR (r3, XMEM_END1_ADR) /* MEEAR1 (98) */
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0x00000000)
+ stwbrx r4,0,r6
+
+ LOADPTR (r3, XMEM_END2_ADR) /* MEEAR2 (9c) */
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0x01010101)
+ stwbrx r4,0,r6
+
+ /*-------ODCR */
+
+ LOADPTR (r3, ODCR_ADR_X) /* Set ODCR */
+ stwbrx r3,0,r5
+
+ li r4, 0x7f
+ stb r4, ODCR_SHIFT(r6) /* ODCR is at +3 offset */
+
+ /*-------MBEN */
+
+ LOADPTR (r3, MEM_EN_ADR) /* Set MBEN (a0) */
+ stwbrx r3,0,r5
+ li r4, 0x01 /* Enable bank 0 */
+ stb r4, 0(r6) /* MBEN is at +0 offset */
+
+#if 0 /* Jimmy: I think page made is broken */
+ /*-------PGMAX */
+
+ LOADPTR (r3, MPM_ADR_X)
+ stwbrx r3,0,r5
+ li r4, 0x32
+ stb r4, MPM_SHIFT(r6) /* PAGE_MODE is at +3 offset */
+#endif
+
+ /* Wait before initializing other registers */
+
+ lis r4,0x0001
+ mtctr r4
+
+KahluaX4wait200us:
+ bdnz KahluaX4wait200us
+
+ /* Set MEMGO bit */
+
+ LOADPTR (r3, MEM_CONT1_ADR) /* MCCR1 (F0) |= PGMAX */
+ stwbrx r3,0,r5
+ lwbrx r4,0,r6 /* old MCCR1 */
+ oris r4,r4,0x0008 /* MEMGO=1 */
+ stwbrx r4, 0, r6
+
+ /* Wait again */
+
+ addis r4,r0,0x0002
+ ori r4,r4,0xffff
+
+ mtctr r4
+
+KahluaX4wait8ref:
+ bdnz KahluaX4wait8ref
+
+ sync
+ eieio
+ mtlr r11
+ blr
+
+#else /* USE_V2_INIT */
+
+
+
+/* U-Boot works, but memory will not run reliably for all address ranges.
+ * Early U-Boot Working init, but 2.4.19 kernel will crash since memory is not
+ * initialized correctly. Could work if debugged.
+ */
+/* PCI Support routines */
+
+ .globl __pci_config_read_32
+__pci_config_read_32:
+ lis r4, 0xfec0
+ stwbrx r3, r0, r4
+ sync
+ lis r4, 0xfee0
+ lwbrx r3, 0, r4
+ blr
+ .globl __pci_config_read_16
+__pci_config_read_16:
+ lis r4, 0xfec0
+ andi. r5, r3, 2
+ stwbrx r3, r0, r4
+ sync
+ oris r4, r5, 0xfee0
+ lhbrx r3, r0, r4
+ blr
+ .globl __pci_config_read_8
+__pci_config_read_8:
+ lis r4, 0xfec0
+ andi. r5, r3, 3
+ stwbrx r3, r0, r4
+ sync
+ oris r4, r5, 0xfee0
+ lbz r3, 0(4)
+ blr
+ .globl __pci_config_write_32
+__pci_config_write_32:
+ lis r5, 0xfec0
+ stwbrx r3, r0, r5
+ sync
+ lis r5, 0xfee0
+ stwbrx r4, r0, r5
+ sync
+ blr
+ .globl __pci_config_write_16
+__pci_config_write_16:
+ lis r5, 0xfec0
+ andi. r6, r3, 2
+ stwbrx r3, r0, 5
+ sync
+ oris r5, r6, 0xfee0
+ sthbrx r4, r0, r5
+ sync
+ blr
+ .globl __pci_config_write_8
+__pci_config_write_8:
+ lis r5, 0xfec0
+ andi. r6, r3, 3
+ stwbrx r3, r0, r5
+ sync
+ oris r5, r6, 0xfee0
+ stb r4, 0(r5)
+ sync
+ blr
+ .globl in_8
+in_8:
+ oris r3, r3, 0xfe00
+ lbz r3,0(r3)
+ blr
+ .globl in_16
+in_16:
+ oris r3, r3, 0xfe00
+ lhbrx r3, 0, r3
+ blr
+ .globl in_16_ne
+in_16_ne:
+ oris r3, r3, 0xfe00
+ lhzx r3, 0, r3
+ blr
+ .globl in_32
+in_32:
+ oris r3, r3, 0xfe00
+ lwbrx r3, 0, r3
+ blr
+ .globl out_8
+out_8:
+ oris r3, r3, 0xfe00
+ stb r4, 0(r3)
+ eieio
+ blr
+ .globl out_16
+out_16:
+ oris r3, r3, 0xfe00
+ sthbrx r4, 0, r3
+ eieio
+ blr
+ .globl out_16_ne
+out_16_ne:
+ oris r3, r3, 0xfe00
+ sth r4, 0(r3)
+ eieio
+ blr
+ .globl out_32
+out_32:
+ oris r3, r3, 0xfe00
+ stwbrx r4, 0, r3
+ eieio
+ blr
+ .globl read_8
+read_8:
+ lbz r3,0(r3)
+ blr
+ .globl read_16
+read_16:
+ lhbrx r3, 0, r3
+ blr
+ .globl read_32
+read_32:
+ lwbrx r3, 0, r3
+ blr
+ .globl read_32_ne
+read_32_ne:
+ lwz r3, 0(r3)
+ blr
+ .globl write_8
+write_8:
+ stb r4, 0(r3)
+ eieio
+ blr
+ .globl write_16
+write_16:
+ sthbrx r4, 0, r3
+ eieio
+ blr
+ .globl write_32
+write_32:
+ stwbrx r4, 0, r3
+ eieio
+ blr
+ .globl write_32_ne
+write_32_ne:
+ stw r4, 0(r3)
+ eieio
+ blr
+
+
+.globl early_init_f
+
+early_init_f:
+ mflr r11
+ lis r10, 0x8000
+
+ /* PCI Latency Timer */
+ li r4, 0x0d
+ ori r3, r10, PLTR@l
+ bl __pci_config_write_8
+
+ /* Cache Line Size */
+ li r4, 0x08
+ ori r3, r10, PCLSR@l
+ bl __pci_config_write_8
+
+ /* PCI Cmd */
+ li r4, 6
+ ori r3, r10, PCICR@l
+ bl __pci_config_write_16
+
+#if 1
+ /* PCI Stat */
+ ori r3, r10, PCISR@l
+ bl __pci_config_read_16
+ ori r4, r4, 0xffff
+ ori r3, r10, PCISR@l
+ bl __pci_config_write_16
+#endif
+
+ /* PICR1 */
+ lis r4, 0xff14
+ ori r4, r4, 0x1b98
+ ori r3, r10, PICR1@l
+ bl __pci_config_write_32
+
+
+ /* PICR2 */
+ lis r4, 0x0404
+ ori r4, r4, 0x0004
+ ori r3, r10, PICR2@l
+ bl __pci_config_write_32
+
+ /* MIOCR1 */
+ li r4, 0x04
+ ori r3, r10, MIOCR1@l
+ bl __pci_config_write_8
+
+ /* For the MPC8245, set register 77 to %00100000 (see Errata #15) */
+ /* SDRAM_CLK_DEL (0x77)*/
+ li r4, 0x10
+ ori r3, r10, MIOCR2@l
+ bl __pci_config_write_8
+
+ /* EUMBBAR */
+ lis r4, 0xfc00
+ ori r3, r10, EUMBBAR@l
+ bl __pci_config_write_32
+
+ /* AMBOR */
+
+ /* Even if Address Map B is not being used (though it should),
+ * the memory DLL needs to be cleared/set/cleared before using memory.
+ */
+
+ ori r3, r10, AMBOR@l
+ bl __pci_config_read_8 /* get Current bits */
+
+ andi. r4, r4, 0xffdf
+ ori r3, r10, AMBOR@l
+ bl __pci_config_write_16 /* Clear DLL_RESET */
+
+ ori r4, r4, 0x0020
+ ori r3, r10, AMBOR@l
+ bl __pci_config_write_16 /* Set DLL_RESET */
+
+ andi. r4, r4, 0xffdf
+ ori r3, r10, AMBOR@l
+ bl __pci_config_write_16 /* Clear DLL_RESET */
+
+ /* ERCR1 */
+ lis r4, 0x8040 /* Enable RCS2, use supplied timings */
+ ori r4, r4, 0x8000
+ ori r3, r10, ERCR1@l
+ bl __pci_config_write_32
+
+ /* ERCR2 */
+ lis r4, 0x0000 /* Disable RCS3 parms */
+ ori r4, r4, 0x0000
+ ori r3, r10, ERCR2@l
+ bl __pci_config_write_32
+
+ /* ERCR3 */
+ lis r4, 0x0000 /* RCS3 at 0x70000000, 64K bytes */
+ ori r4, r4, 0x0004
+ ori r3, r10, ERCR2@l
+ bl __pci_config_write_32
+
+ /* Preserve memgo bit */
+ /* MCCR1 */
+
+/* lis r4, 0x75a8 / Safe Local ROM = 11+3 clocks */
+ lis r4, 0x75a0 /* Safe Local ROM = 11+3 clocks */
+/* lis r4, 0x73a0 / Fast Local ROM = 7+3 clocks */
+/* oris r4, r4, 0x0010 / Burst ROM/Flash enable */
+/* oris r4, r4, 0x0004 / Self-refresh enable */
+
+/* ori r4,r4,0xFFFF / 16Mbit 2bank SDRAM */
+/* ori r4,r4,0xAAAA / 256Mbit 4bank SDRAM (8245 only) */
+/* ori r4,r4,0x5555 / 64Mbit 2bank SDRAM */
+ ori r4,r4,0x0000 /* 64Mbit 4bank SDRAM */
+
+ ori r3, r10, MCCR1@l
+ bl __pci_config_write_32
+
+ /* MCCR2 */
+
+ lis r4,0x0000
+/* oris r4,r4,0x4000 / TS_WAIT_TIMER = 3 clocks */
+ oris r4,r4,0x1000 /* ASRISE = 8 clocks */
+ oris r4,r4,0x0080 /* ASFALL = 8 clocks */
+/* oris r4,r4,0x0010 / SDRAM Parity (else ECC) */
+/* oris r4,r4,0x0008 / Write parity check */
+/* oris r4,r4,0x0004 / SDRAM inline reads */
+
+
+/* Select a refresh rate; it needs to match the bus speed; if too */
+/* slow, data may be lost; if too fast, performance is lost. We */
+/* use the fastest value so we run at all speeds. */
+/* Refresh = (15600ns/busclk) - (213 (see UM)). */
+
+/* ori r4,r4,0x1d2c / 133 MHz mem bus = 1867 */
+/* ori r4,r4,0x150c / 100 MHz mem bus = 1347 */
+/* ori r4,r4,0x10fc / 83 MHz mem bus = 1087 */
+/* ori r4,r4,0x0cc4 / 66 MHz mem bus = 817 */
+ ori r4,r4,0x04cc /* 33 MHz mem bus (SAFE) = 307 */
+/* ori r4,r4,0x0002 / Reserve a page */
+/* ori r4,r4,0x0001 / RWM parity */
+
+ ori r3, r10, MCCR2@l
+ bl __pci_config_write_32
+
+
+ /* MCCR3 */
+ lis r4,0x0000 /* BSTOPRE_M = 7 (see A/N) */
+ oris r4,r4,0x0500 /* REFREC = 8 clocks */
+ ori r3, r10, MCCR3@l
+ bl __pci_config_write_32
+
+ /* MCCR4 */ /* Turn on registered buffer mode */
+ lis r4, 0x2000 /* PRETOACT = 3 clocks */
+ oris r4,r4,0x0400 /* ACTOPRE = 5 clocks */
+/* oris r4,r4,0x0080 / Enable 8-beat burst (32-bit bus) */
+/* oris r4,r4,0x0040 / Enable Inline ECC/Parity */
+ oris r4,r4,0x0020 /* EXTROM enabled */
+ oris r4,r4,0x0010 /* Registered buffers */
+/* oris r4,r4,0x0000 / BSTOPRE_U = 0 (see A/N) */
+ oris r4,r4,0x0002 /* DBUS_SIZ[2] (8 bit on RCS1) */
+
+/* ori r4,r4,0x8000 / Registered DIMMs */
+ ori r4,r4,0x2000 /*CAS Latency (CL=3) (see RDLAT) */
+/* ori r4,r4,0x2000 / CAS Latency (CL=2) (see RDLAT) */
+/* ori r4,r4,0x0300 / Sequential wrap/8-beat burst */
+ ori r4,r4,0x0200 /* Sequential wrap/4-beat burst */
+ ori r4,r4,0x0030 /* ACTORW = 3 clocks */
+ ori r4,r4,0x0009 /* BSTOPRE_L = 9 (see A/N) */
+
+ ori r3, r10, MCCR4@l
+ bl __pci_config_write_32
+
+ /* MSAR1 */
+ lis r4, 0xc0804000@h
+ ori r4, r4, 0xc0804000@l
+ ori r3, r10, MSAR1@l
+ bl __pci_config_write_32
+
+ /* MSAR2 */
+ lis r4, 0xc0804000@h
+ ori r4, r4, 0xc0804000@l
+ ori r3, r10, MSAR2@l
+ bl __pci_config_write_32
+
+ /* MESAR1 */
+ lis r4, 0x00000000@h
+ ori r4, r4, 0x00000000@l
+ ori r3, r10, EMSAR1@l
+ bl __pci_config_write_32
+
+ /* MESAR2 */
+ lis r4, 0x01010101@h
+ ori r4, r4, 0x01010101@l
+ ori r3, r10, EMSAR2@l
+ bl __pci_config_write_32
+
+ /* MEAR1 */
+ lis r4, 0xffbf7f3f@h
+ ori r4, r4, 0xffbf7f3f@l
+ ori r3, r10, MEAR1@l
+ bl __pci_config_write_32
+
+ /* MEAR2 */
+ lis r4, 0xffbf7f3f@h
+ ori r4, r4, 0xffbf7f3f@l
+ ori r3, r10, MEAR2@l
+ bl __pci_config_write_32
+
+ /* MEEAR1 */
+ lis r4, 0x00000000@h
+ ori r4, r4, 0x00000000@l
+ ori r3, r10, EMEAR1@l
+ bl __pci_config_write_32
+
+ /* MEEAR2 */
+ lis r4, 0x01010101@h
+ ori r4, r4, 0x01010101@l
+ ori r3, r10, EMEAR2@l
+ bl __pci_config_write_32
+
+ /* ODCR */
+ li r4, 0x7f
+ ori r3, r10, ODCR@l
+ bl __pci_config_write_8
+
+ /* MBER */
+ li r4, 0x01
+ ori r3, r10, MBER@l
+ bl __pci_config_write_8
+
+ /* Page CTR aka PGMAX */
+ li r4, 0x32
+ ori r3, r10, 0x70
+ bl __pci_config_write_8
+
+#if 0
+ /* CLK Drive */
+ ori r4, r10, 0xfc01 /* Top bit will be ignored */
+ ori r3, r10, 0x74
+ bl __pci_config_write_16
+#endif
+
+ /* delay */
+ lis r7, 1
+ mtctr r7
+label1: bdnz label1
+
+ /* Set memgo bit */
+ /* MCCR1 */
+ ori r3, r10, MCCR1@l
+ bl __pci_config_read_32
+ lis r7, 0x0008
+ or r4, r3, r7
+ ori r3, r10, MCCR1@l
+ bl __pci_config_write_32
+
+ /* delay again */
+ lis r7, 1
+ mtctr r7
+label2: bdnz label2
+#if 0
+/* DEBUG: Infinite loop, write then read */
+loop:
+ lis r7, 0xffff
+ mtctr r7
+ li r3, 0x5004
+ lis r4, 0xa0a0
+ ori r4, r4, 0x5050
+ bl write_32_ne
+ li r3, 0x5004
+ bl read_32_ne
+ bdnz loop
+#endif
+ mtlr r11
+ blr
+#endif
+