summaryrefslogtreecommitdiff
path: root/board/bf609-ezkit
diff options
context:
space:
mode:
Diffstat (limited to 'board/bf609-ezkit')
-rw-r--r--board/bf609-ezkit/Kconfig9
-rw-r--r--board/bf609-ezkit/MAINTAINERS6
-rw-r--r--board/bf609-ezkit/Makefile13
-rw-r--r--board/bf609-ezkit/bf609-ezkit.c68
-rw-r--r--board/bf609-ezkit/soft_switch.c171
-rw-r--r--board/bf609-ezkit/soft_switch.h80
6 files changed, 0 insertions, 347 deletions
diff --git a/board/bf609-ezkit/Kconfig b/board/bf609-ezkit/Kconfig
deleted file mode 100644
index 7992e1ec86..0000000000
--- a/board/bf609-ezkit/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_BF609_EZKIT
-
-config SYS_BOARD
- default "bf609-ezkit"
-
-config SYS_CONFIG_NAME
- default "bf609-ezkit"
-
-endif
diff --git a/board/bf609-ezkit/MAINTAINERS b/board/bf609-ezkit/MAINTAINERS
deleted file mode 100644
index acfc6c7a86..0000000000
--- a/board/bf609-ezkit/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-BF609-EZKIT BOARD
-M: Sonic Zhang <sonic.adi@gmail.com>
-S: Maintained
-F: board/bf609-ezkit/
-F: include/configs/bf609-ezkit.h
-F: configs/bf609-ezkit_defconfig
diff --git a/board/bf609-ezkit/Makefile b/board/bf609-ezkit/Makefile
deleted file mode 100644
index e4184ee2b6..0000000000
--- a/board/bf609-ezkit/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# U-Boot - Makefile
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := bf609-ezkit.o
-obj-$(CONFIG_BFIN_SOFT_SWITCH) += soft_switch.o
diff --git a/board/bf609-ezkit/bf609-ezkit.c b/board/bf609-ezkit/bf609-ezkit.c
deleted file mode 100644
index c993ca6d91..0000000000
--- a/board/bf609-ezkit/bf609-ezkit.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * U-Boot - main board file
- *
- * Copyright (c) 2008-2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/blackfin.h>
-#include <asm/io.h>
-#include <asm/sdh.h>
-#include <asm/portmux.h>
-#include "soft_switch.h"
-
-int checkboard(void)
-{
- printf("Board: ADI BF609 EZ-Kit board\n");
- printf(" Support: http://blackfin.uclinux.org/\n");
- return 0;
-}
-
-int board_early_init_f(void)
-{
- static const unsigned short pins[] = {
- P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
- P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21,
- P_A22, P_A23, P_A24, P_A25, P_NORCK, 0,
- };
- peripheral_request_list(pins, "smc0");
-
- return 0;
-}
-
-#ifdef CONFIG_ETH_DESIGNWARE
-int board_eth_init(bd_t *bis)
-{
- int ret = 0;
-
- if (CONFIG_DW_PORTS & 1) {
- static const unsigned short pins[] = P_RMII0;
- if (!peripheral_request_list(pins, "emac0"))
- ret += designware_initialize(EMAC0_MACCFG, 0);
- }
- if (CONFIG_DW_PORTS & 2) {
- static const unsigned short pins[] = P_RMII1;
- if (!peripheral_request_list(pins, "emac1"))
- ret += designware_initialize(EMAC1_MACCFG, 0);
- }
-
- return ret;
-}
-#endif
-
-#ifdef CONFIG_BFIN_SDH
-int board_mmc_init(bd_t *bis)
-{
- return bfin_mmc_init(bis);
-}
-#endif
-
-/* miscellaneous platform dependent initialisations */
-int misc_init_r(void)
-{
- printf("other init\n");
- return setup_board_switches();
-}
diff --git a/board/bf609-ezkit/soft_switch.c b/board/bf609-ezkit/soft_switch.c
deleted file mode 100644
index 7c117ea997..0000000000
--- a/board/bf609-ezkit/soft_switch.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * U-Boot - main board file
- *
- * Copyright (c) 2008-2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <asm/blackfin.h>
-#include <asm/io.h>
-#include <i2c.h>
-#include "soft_switch.h"
-
-struct switch_config {
- uchar dir0; /* IODIRA */
- uchar dir1; /* IODIRB */
- uchar value0; /* OLATA */
- uchar value1; /* OLATB */
-};
-
-static struct switch_config switch_config_array[NUM_SWITCH] = {
- {
-/*
- U45 Port A U45 Port B
-
- 7--------------- RMII_CLK_EN | 7--------------- ~TEMP_THERM_EN
- | 6------------- ~CNT0ZM_EN | | 6------------- ~TEMP_IRQ_EN
- | | 5----------- ~CNT0DG_EN | | | 5----------- ~UART0CTS_146_EN
- | | | 4--------- ~CNT0UD_EN | | | | 4--------- ~UART0CTS_RST_EN
- | | | | 3------- ~CAN0RX_EN | | | | | 3------- ~UART0CTS_RTS_LPBK
- | | | | | 2----- ~CAN0_ERR_EN | | | | | | 2----- ~UART0CTS_EN
- | | | | | | 1--- ~CAN_STB | | | | | | | 1--- ~UART0RX_EN
- | | | | | | | 0- CAN_EN | | | | | | | | 0- ~UART0RTS_EN
- | | | | | | | | | | | | | | | | |
- O O O O O O O O | O O O O O O O O (I/O direction)
- 1 0 0 0 0 0 1 1 | 1 1 1 1 1 0 0 0 (value being set)
-*/
- .dir0 = 0x0, /* all output */
- .dir1 = 0x0, /* all output */
- .value0 = RMII_CLK_EN | CAN_STB | CAN_EN,
- .value1 = TEMP_THERM_EN | TEMP_IRQ_EN | UART0CTS_146_EN
- | UART0CTS_RST_EN | UART0CTS_RTS_LPBK,
- },
- {
-/*
- U46 Port A U46 Port B
-
- 7--------------- ~LED4_GPIO_EN | 7--------------- EMPTY
- | 6------------- ~LED3_GPIO_EN | | 6------------- ~SPI0D3_EN
- | | 5----------- ~LED2_GPIO_EN | | | 5----------- ~SPI0D2_EN
- | | | 4--------- ~LED1_GPIO_EN | | | | 4--------- ~SPIFLASH_CS_EN
- | | | | 3------- SMC0_LP0_EN | | | | | 3------- ~SD_WP_EN
- | | | | | 2----- EMPTY | | | | | | 2----- ~SD_CD_EN
- | | | | | | 1--- SMC0_EPPI2 | | | | | | | 1--- ~PUSHBUTTON2_EN
- _LP1_SWITCH
- | | | | | | | 0- OVERRIDE_SMC0 | | | | | | | | 0- ~PUSHBUTTON1_EN
- _LP0_BOOT
- | | | | | | | | | | | | | | | | |
- O O O O O O O O | O O O O O O O O (I/O direction)
- 0 0 0 0 0 X 0 1 | X 0 0 0 0 0 0 0 (value being set)
-*/
- .dir0 = 0x0, /* all output */
- .dir1 = 0x0, /* all output */
-#ifdef CONFIG_BFIN_LINKPORT
- .value0 = OVERRIDE_SMC0_LP0_BOOT,
-#else
- .value0 = SMC0_EPPI2_LP1_SWITCH,
-#endif
- .value1 = 0x0,
- },
- {
-/*
- U47 Port A U47 Port B
-
- 7--------------- ~PD2_SPI0MISO | 7--------------- EMPTY
- _EI3_EN
- | 6------------- ~PD1_SPI0D3 | | 6------------- EMPTY
- _EPPI1D17
- _SPI0SEL2
- _EI3_EN
- | | 5----------- ~PD0_SPI0D2 | | | 5----------- EMPTY
- _EPPI1D16
- _SPI0SEL3
- _EI3_EN
- | | | 4--------- ~WAKE_PUSH | | | | 4--------- EMPTY
- BUTTON_EN
- | | | | 3------- ~ETHERNET_EN | | | | | 3------- EMPTY
- | | | | | 2----- PHYAD0 | | | | | | 2----- EMPTY
- | | | | | | 1--- PHY_PWR | | | | | | | 1--- ~PD4_SPI0CK_EI3_EN
- _DWN_INT
- | | | | | | | 0- ~PHYINT_EN | | | | | | | | 0- ~PD3_SPI0MOSI_EI3_EN
- | | | | | | | | | | | | | | | | |
- O O O O O I I O | O O O O O O O O (I/O direction)
- 1 1 1 0 0 0 0 0 | X X X X X X 1 1 (value being set)
-*/
- .dir0 = 0x6, /* bits 1 and 2 input, all others output */
- .dir1 = 0x0, /* all output */
- .value0 = PD1_SPI0D3_EN | PD0_SPI0D2_EN,
- .value1 = 0,
- },
-};
-
-static int setup_soft_switch(int addr, struct switch_config *config)
-{
- int ret = 0;
-
- ret = i2c_write(addr, OLATA, 1, &config->value0, 1);
- if (ret)
- return ret;
- ret = i2c_write(addr, OLATB, 1, &config->value1, 1);
- if (ret)
- return ret;
-
- ret = i2c_write(addr, IODIRA, 1, &config->dir0, 1);
- if (ret)
- return ret;
- return i2c_write(addr, IODIRB, 1, &config->dir1, 1);
-}
-
-int config_switch_bit(int addr, int port, int bit, int dir, uchar value)
-{
- int ret, data_reg, dir_reg;
- uchar tmp;
-
- if (port == IO_PORT_A) {
- data_reg = OLATA;
- dir_reg = IODIRA;
- } else {
- data_reg = OLATB;
- dir_reg = IODIRB;
- }
-
- if (dir == IO_PORT_INPUT) {
- ret = i2c_read(addr, dir_reg, 1, &tmp, 1);
- if (ret)
- return ret;
- tmp |= bit;
- return i2c_write(addr, dir_reg, 1, &tmp, 1);
- } else {
- ret = i2c_read(addr, data_reg, 1, &tmp, 1);
- if (ret)
- return ret;
- if (value)
- tmp |= bit;
- else
- tmp &= ~bit;
- ret = i2c_write(addr, data_reg, 1, &tmp, 1);
- if (ret)
- return ret;
- ret = i2c_read(addr, dir_reg, 1, &tmp, 1);
- if (ret)
- return ret;
- tmp &= ~bit;
- return i2c_write(addr, dir_reg, 1, &tmp, 1);
- }
-}
-
-int setup_board_switches(void)
-{
- int ret;
- int i;
-
- for (i = 0; i < NUM_SWITCH; i++) {
- ret = setup_soft_switch(SWITCH_ADDR + i,
- &switch_config_array[i]);
- if (ret)
- return ret;
- }
- return 0;
-}
diff --git a/board/bf609-ezkit/soft_switch.h b/board/bf609-ezkit/soft_switch.h
deleted file mode 100644
index 75d64e279a..0000000000
--- a/board/bf609-ezkit/soft_switch.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * U-Boot - main board file
- *
- * Copyright (c) 2008-2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef __BOARD_SOFT_SWITCH_H__
-#define __BOARD_SOFT_SWITCH_H__
-
-#include <asm/soft_switch.h>
-
-/* switch 0 port A */
-#define CAN_EN 0x1
-#define CAN_STB 0x2
-#define CAN0_ERR_EN 0x4
-#define CAN0RX_EN 0x8
-#define CNT0UD_EN 0x10
-#define CNT0DG_EN 0x20
-#define CNT0ZM_EN 0x40
-#define RMII_CLK_EN 0x80
-
-/* switch 0 port B */
-#define UART0RTS_EN 0x1
-#define UART0RX_EN 0x2
-#define UART0CTS_EN 0x4
-#define UART0CTS_RTS_LPBK 0x8
-#define UART0CTS_RST_EN 0x10
-#define UART0CTS_146_EN 0x20
-#define TEMP_IRQ_EN 0x40
-#define TEMP_THERM_EN 0x80
-
-/* switch 1 port A */
-#define OVERRIDE_SMC0_LP0_BOOT 0x1
-#define SMC0_EPPI2_LP1_SWITCH 0x2
-#define SMC0_LP0_EN 0x8
-#define LED1_GPIO_EN 0x10
-#define LED2_GPIO_EN 0x20
-#define LED3_GPIO_EN 0x40
-#define LED4_GPIO_EN 0x80
-
-/* switch 1 port B */
-#define PUSHBUTTON1_EN 0x1
-#define PUSHBUTTON2_EN 0x2
-#define SD_CD_EN 0x4
-#define SD_WP_EN 0x8
-#define SPIFLASH_CS_EN 0x10
-#define SPI0D2_EN 0x20
-#define SPI0D3_EN 0x40
-
-/* switch 2 port A */
-#define PHYINT_EN 0x1
-#define PHY_PWR_DWN_INT 0x2
-#define PHYAD0 0x4
-#define ETHERNET_EN 0x8
-#define WAKE_PUSHBUTTON_EN 0x10
-#define PD0_SPI0D2_EN 0x20
-#define PD1_SPI0D3_EN 0x40
-#define PD2_SPI0MISO_EN 0x80
-
-/* switch 2 port B */
-#define PD3_SPI0MOSI_EN 0x1
-#define PD4_SPI0CK_EN 0x2
-
-#ifdef CONFIG_BFIN_BOARD_VERSION_1_0
-#define SWITCH_ADDR 0x21
-#else
-#define SWITCH_ADDR 0x20
-#endif
-
-#define NUM_SWITCH 3
-#define IODIRA 0x0
-#define IODIRB 0x1
-#define OLATA 0x14
-#define OLATB 0x15
-
-int setup_board_switches(void);
-
-#endif /* __BOARD_SOFT_SWITCH_H__ */
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-30 10:12:20 +0000