summaryrefslogtreecommitdiff
path: root/board/bf537-stamp
diff options
context:
space:
mode:
Diffstat (limited to 'board/bf537-stamp')
-rw-r--r--board/bf537-stamp/bf537-stamp.c14
-rw-r--r--board/bf537-stamp/nand.c8
-rw-r--r--board/bf537-stamp/post-memory.c8
-rw-r--r--board/bf537-stamp/spi_flash.c2
-rw-r--r--board/bf537-stamp/u-boot.lds.S4
5 files changed, 18 insertions, 18 deletions
diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c
index 4567213111b..7303f1b4155 100644
--- a/board/bf537-stamp/bf537-stamp.c
+++ b/board/bf537-stamp/bf537-stamp.c
@@ -109,12 +109,12 @@ phys_size_t initdram(int board_type)
printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
"tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
3, 3, 6, 2, 3);
- printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
- printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE >> 20);
+ printf("SDRAM Begin: 0x%x\n", CONFIG_SYS_SDRAM_BASE);
+ printf("Bank size = %d MB\n", CONFIG_SYS_MAX_RAM_SIZE >> 20);
#endif
- gd->bd->bi_memstart = CFG_SDRAM_BASE;
- gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
- return CFG_MAX_RAM_SIZE;
+ gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
+ return CONFIG_SYS_MAX_RAM_SIZE;
}
#if defined(CONFIG_MISC_INIT_R)
@@ -236,11 +236,11 @@ int flash_post_test(int flags)
erase_block_flash(n);
printf("OK\r");
printf("--------Program block:%2d...", n);
- write_data(CFG_FLASH_BASE + offset, BLOCK_SIZE, pbuf);
+ write_data(CONFIG_SYS_FLASH_BASE + offset, BLOCK_SIZE, pbuf);
printf("OK\r");
printf("--------Verify block:%2d...", n);
for (i = 0; i < BLOCK_SIZE; i += 2) {
- if (*(unsigned short *)(CFG_FLASH_BASE + offset + i) !=
+ if (*(unsigned short *)(CONFIG_SYS_FLASH_BASE + offset + i) !=
*temp++) {
value = 1;
result = 1;
diff --git a/board/bf537-stamp/nand.c b/board/bf537-stamp/nand.c
index 9800083c9e9..c597f2db1e3 100644
--- a/board/bf537-stamp/nand.c
+++ b/board/bf537-stamp/nand.c
@@ -44,13 +44,13 @@ static void bfin_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
if (ctrl & NAND_CTRL_CHANGE) {
if( ctrl & NAND_CLE )
- IO_ADDR_W = CFG_NAND_BASE + BFIN_NAND_CLE;
+ IO_ADDR_W = CONFIG_SYS_NAND_BASE + BFIN_NAND_CLE;
else
- IO_ADDR_W = CFG_NAND_BASE;
+ IO_ADDR_W = CONFIG_SYS_NAND_BASE;
if( ctrl & NAND_ALE )
- IO_ADDR_W = CFG_NAND_BASE + BFIN_NAND_ALE;
+ IO_ADDR_W = CONFIG_SYS_NAND_BASE + BFIN_NAND_ALE;
else
- IO_ADDR_W = CFG_NAND_BASE;
+ IO_ADDR_W = CONFIG_SYS_NAND_BASE;
this->IO_ADDR_W = (void __iomem *) IO_ADDR_W;
}
this->IO_ADDR_R = this->IO_ADDR_W;
diff --git a/board/bf537-stamp/post-memory.c b/board/bf537-stamp/post-memory.c
index fa119919b39..7c36c8155e0 100644
--- a/board/bf537-stamp/post-memory.c
+++ b/board/bf537-stamp/post-memory.c
@@ -6,7 +6,7 @@
#include <post.h>
#include <watchdog.h>
-#if CONFIG_POST & CFG_POST_MEMORY
+#if CONFIG_POST & CONFIG_SYS_POST_MEMORY
#define CLKIN 25000000
#define PATTERN1 0x5A5A5A5A
#define PATTERN2 0xAAAAAAAA
@@ -71,10 +71,10 @@ int memory_post_test(int flags)
post_init_uart(sclk);
post_out_buff("\n\r\0");
post_out_buff(log[m][n]);
- for (addr = 0x0; addr < CFG_MAX_RAM_SIZE; addr += 4)
+ for (addr = 0x0; addr < CONFIG_SYS_MAX_RAM_SIZE; addr += 4)
*(unsigned long *)addr = PATTERN1;
post_out_buff("Reading...\0");
- for (addr = 0x0; addr < CFG_MAX_RAM_SIZE; addr += 4) {
+ for (addr = 0x0; addr < CONFIG_SYS_MAX_RAM_SIZE; addr += 4) {
if ((*(unsigned long *)addr) != PATTERN1) {
post_out_buff("Error\n\r\0");
ret = 0;
@@ -318,5 +318,5 @@ int post_init_sdram(int sclk)
return mem_SDRRC;
}
-#endif /* CONFIG_POST & CFG_POST_MEMORY */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_MEMORY */
#endif /* CONFIG_POST */
diff --git a/board/bf537-stamp/spi_flash.c b/board/bf537-stamp/spi_flash.c
index 7c73ddd7208..11a2803e6f2 100644
--- a/board/bf537-stamp/spi_flash.c
+++ b/board/bf537-stamp/spi_flash.c
@@ -412,7 +412,7 @@ void spi_init_f(void)
*/
void spi_init_r(void)
{
-#if defined(CONFIG_POST) && (CONFIG_POST & CFG_POST_SPI)
+#if defined(CONFIG_POST) && (CONFIG_POST & CONFIG_SYS_POST_SPI)
/* Our testing strategy here is pretty basic:
* - fill src memory with an 8-bit pattern
* - write the src memory to the SPI flash
diff --git a/board/bf537-stamp/u-boot.lds.S b/board/bf537-stamp/u-boot.lds.S
index 4e7fd7c0419..97ebd792601 100644
--- a/board/bf537-stamp/u-boot.lds.S
+++ b/board/bf537-stamp/u-boot.lds.S
@@ -36,7 +36,7 @@
* for different CPU's which may lack non-cache L1 data.
*/
#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CFG_MONITOR_BASE
+# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
# define L1_DATA_B_SRAM_SIZE 0
#endif
@@ -45,7 +45,7 @@ OUTPUT_ARCH(bfin)
/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
MEMORY
{
- ram : ORIGIN = CFG_MONITOR_BASE, LENGTH = CFG_MONITOR_LEN
+ ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE
l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
}