diff options
Diffstat (limited to 'board/bf533-ezkit')
-rw-r--r-- | board/bf533-ezkit/Kconfig | 9 | ||||
-rw-r--r-- | board/bf533-ezkit/MAINTAINERS | 6 | ||||
-rw-r--r-- | board/bf533-ezkit/Makefile | 12 | ||||
-rw-r--r-- | board/bf533-ezkit/bf533-ezkit.c | 44 | ||||
-rw-r--r-- | board/bf533-ezkit/config.mk | 11 | ||||
-rw-r--r-- | board/bf533-ezkit/flash-defines.h | 106 | ||||
-rw-r--r-- | board/bf533-ezkit/flash.c | 473 | ||||
-rw-r--r-- | board/bf533-ezkit/psd4256.h | 51 |
8 files changed, 0 insertions, 712 deletions
diff --git a/board/bf533-ezkit/Kconfig b/board/bf533-ezkit/Kconfig deleted file mode 100644 index 555ab298f24..00000000000 --- a/board/bf533-ezkit/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_BF533_EZKIT - -config SYS_BOARD - default "bf533-ezkit" - -config SYS_CONFIG_NAME - default "bf533-ezkit" - -endif diff --git a/board/bf533-ezkit/MAINTAINERS b/board/bf533-ezkit/MAINTAINERS deleted file mode 100644 index bfa7c3cb29f..00000000000 --- a/board/bf533-ezkit/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -BF533-EZKIT BOARD -M: Sonic Zhang <sonic.adi@gmail.com> -S: Maintained -F: board/bf533-ezkit/ -F: include/configs/bf533-ezkit.h -F: configs/bf533-ezkit_defconfig diff --git a/board/bf533-ezkit/Makefile b/board/bf533-ezkit/Makefile deleted file mode 100644 index bf7a2c4477a..00000000000 --- a/board/bf533-ezkit/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# U-Boot - Makefile -# -# Copyright (c) 2005-2007 Analog Device Inc. -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := bf533-ezkit.o flash.o diff --git a/board/bf533-ezkit/bf533-ezkit.c b/board/bf533-ezkit/bf533-ezkit.c deleted file mode 100644 index 6879319a70f..00000000000 --- a/board/bf533-ezkit/bf533-ezkit.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * U-Boot - main board file - * - * Copyright (c) 2005-2008 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> -#include "psd4256.h" -#include "flash-defines.h" - -DECLARE_GLOBAL_DATA_PTR; - -int checkboard(void) -{ - printf("Board: ADI BF533 EZ-Kit Lite board\n"); - printf(" Support: http://blackfin.uclinux.org/\n"); - return 0; -} - -/* miscellaneous platform dependent initialisations */ -int misc_init_r(void) -{ - /* Set direction bits for Video en/decoder reset as output */ - *(volatile unsigned char *)(CONFIG_SYS_FLASH1_BASE + PSD_PORTA_DIR) = - PSDA_VDEC_RST | PSDA_VENC_RST; - /* Deactivate Video en/decoder reset lines */ - *(volatile unsigned char *)(CONFIG_SYS_FLASH1_BASE + PSD_PORTA_DOUT) = - PSDA_VDEC_RST | PSDA_VENC_RST; - - return 0; -} - -#ifdef CONFIG_SMC91111 -int board_eth_init(bd_t *bis) -{ - return smc91111_initialize(0, CONFIG_SMC91111_BASE); -} -#endif diff --git a/board/bf533-ezkit/config.mk b/board/bf533-ezkit/config.mk deleted file mode 100644 index 7f9138b09be..00000000000 --- a/board/bf533-ezkit/config.mk +++ /dev/null @@ -1,11 +0,0 @@ -# -# Copyright (c) 2005-2008 Analog Device Inc. -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# Set some default LDR flags based on boot mode. -LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/bf533-ezkit/flash-defines.h b/board/bf533-ezkit/flash-defines.h deleted file mode 100644 index 7822a9dfd72..00000000000 --- a/board/bf533-ezkit/flash-defines.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * U-Boot - flash-defines.h - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __FLASHDEFINES_H__ -#define __FLASHDEFINES_H__ - -#include <common.h> - -#define V_ULONG(a) (*(volatile unsigned long *)( a )) -#define V_BYTE(a) (*(volatile unsigned char *)( a )) -#define BUFFER_SIZE 0x80000 -#define NO_COMMAND 0 -#define GET_CODES 1 -#define RESET 2 -#define WRITE 3 -#define FILL 4 -#define ERASE_ALL 5 -#define ERASE_SECT 6 -#define READ 7 -#define GET_SECTNUM 8 -#define FLASH_START_L 0x0000 -#define FLASH_START_H 0x2000 -#define FLASH_TOT_SECT 40 -#define FLASH_SIZE 0x220000 -#define FLASH_MAN_ST 2 -#define CONFIG_SYS_FLASH0_BASE 0x20000000 -#define CONFIG_SYS_FLASH1_BASE 0x20200000 -#define RESET_VAL 0xF0 - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -int get_codes(void); -int poll_toggle_bit(long lOffset); -void reset_flash(void); -int erase_flash(void); -int erase_block_flash(int, unsigned long); -void unlock_flash(long lOffset); -int write_data(long lStart, long lCount, uchar *pnData); -int FillData(long lStart, long lCount, long lStride, int *pnData); -int read_data(long lStart, long lCount, long lStride, int *pnData); -int read_flash(long nOffset, int *pnValue); -int write_flash(long nOffset, int nValue); -void get_sector_number(long lOffset, int *pnSector); -int GetSectorProtectionStatus(flash_info_t * info, int nSector); -int GetOffset(int nBlock); - -#define WRITESEQ1 0x0AAA -#define WRITESEQ2 0x0554 -#define WRITESEQ3 0x0AAA -#define WRITESEQ4 0x0AAA -#define WRITESEQ5 0x0554 -#define WRITESEQ6 0x0AAA -#define WRITEDATA1 0xaa -#define WRITEDATA2 0x55 -#define WRITEDATA3 0x80 -#define WRITEDATA4 0xaa -#define WRITEDATA5 0x55 -#define WRITEDATA6 0x10 -#define PriFlashABegin 0 -#define SecFlashABegin 32 -#define SecFlashBBegin 36 -#define PriFlashAOff 0x0 -#define PriFlashBOff 0x100000 -#define SecFlashAOff 0x200000 -#define SecFlashBOff 0x280000 -#define INVALIDLOCNSTART 0x20270000 -#define INVALIDLOCNEND 0x20280000 -#define BlockEraseVal 0x30 -#define UNLOCKDATA1 0xaa -#define UNLOCKDATA2 0x55 -#define UNLOCKDATA3 0xa0 -#define GETCODEDATA1 0xaa -#define GETCODEDATA2 0x55 -#define GETCODEDATA3 0x90 -#define SecFlashASec1Off 0x200000 -#define SecFlashASec2Off 0x204000 -#define SecFlashASec3Off 0x206000 -#define SecFlashASec4Off 0x208000 -#define SecFlashAEndOff 0x210000 -#define SecFlashBSec1Off 0x280000 -#define SecFlashBSec2Off 0x284000 -#define SecFlashBSec3Off 0x286000 -#define SecFlashBSec4Off 0x288000 -#define SecFlashBEndOff 0x290000 - -#define SECT32 32 -#define SECT33 33 -#define SECT34 34 -#define SECT35 35 -#define SECT36 36 -#define SECT37 37 -#define SECT38 38 -#define SECT39 39 - -#define FLASH_SUCCESS 0 -#define FLASH_FAIL -1 - -#endif diff --git a/board/bf533-ezkit/flash.c b/board/bf533-ezkit/flash.c deleted file mode 100644 index a7b3519d950..00000000000 --- a/board/bf533-ezkit/flash.c +++ /dev/null @@ -1,473 +0,0 @@ -/* - * U-Boot - flash.c Flash driver for PSD4256GV - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * This file is based on BF533EzFlash.c originally written by Analog Devices, Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/io.h> -#include "flash-defines.h" - -int AFP_NumSectors = 40; -long AFP_SectorSize1 = 0x10000; -int AFP_SectorSize2 = 0x4000; - -void flash_reset(void) -{ - reset_flash(); -} - -unsigned long flash_get_size(ulong baseaddr, flash_info_t * info, int bank_flag) -{ - int id = 0, i = 0; - static int FlagDev = 1; - - id = get_codes(); - if (FlagDev) { -#ifdef DEBUG - printf("Device ID of the Flash is %x\n", id); -#endif - FlagDev = 0; - } - info->flash_id = id; - - switch (bank_flag) { - case 0: - for (i = PriFlashABegin; i < SecFlashABegin; i++) - info->start[i] = (baseaddr + (i * AFP_SectorSize1)); - info->size = 0x200000; - info->sector_count = 32; - break; - case 1: - info->start[0] = baseaddr + SecFlashASec1Off; - info->start[1] = baseaddr + SecFlashASec2Off; - info->start[2] = baseaddr + SecFlashASec3Off; - info->start[3] = baseaddr + SecFlashASec4Off; - info->size = 0x10000; - info->sector_count = 4; - break; - case 2: - info->start[0] = baseaddr + SecFlashBSec1Off; - info->start[1] = baseaddr + SecFlashBSec2Off; - info->start[2] = baseaddr + SecFlashBSec3Off; - info->start[3] = baseaddr + SecFlashBSec4Off; - info->size = 0x10000; - info->sector_count = 4; - break; - } - return (info->size); -} - -unsigned long flash_init(void) -{ - unsigned long size_b0, size_b1, size_b2; - int i; - - size_b0 = size_b1 = size_b2 = 0; -#ifdef DEBUG - printf("Flash Memory Start 0x%x\n", CONFIG_SYS_FLASH_BASE); - printf("Memory Map for the Flash\n"); - printf("0x20000000 - 0x200FFFFF Flash A Primary (1MB)\n"); - printf("0x20100000 - 0x201FFFFF Flash B Primary (1MB)\n"); - printf("0x20200000 - 0x2020FFFF Flash A Secondary (64KB)\n"); - printf("0x20280000 - 0x2028FFFF Flash B Secondary (64KB)\n"); - printf("Please type command flinfo for information on Sectors \n"); -#endif - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - size_b0 = flash_get_size(CONFIG_SYS_FLASH0_BASE, &flash_info[0], 0); - size_b1 = flash_get_size(CONFIG_SYS_FLASH0_BASE, &flash_info[1], 1); - size_b2 = flash_get_size(CONFIG_SYS_FLASH0_BASE, &flash_info[2], 2); - - if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) { - printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0 >> 20); - } - - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_FLASH0_BASE, - (flash_info[0].start[2] - 1), &flash_info[0]); - - return (size_b0 + size_b1 + size_b2); -} - -void flash_print_info(flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id) { - case FLASH_PSD4256GV: - printf("ST Microelectronics "); - break; - default: - printf("Unknown Vendor: (0x%08lX) ", info->flash_id); - break; - } - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf("\n "); - printf(" %08lX%s", - info->start[i], info->protect[i] ? " (RO)" : " "); - } - printf("\n"); - return; -} - -int flash_erase(flash_info_t * info, int s_first, int s_last) -{ - int cnt = 0, i; - int prot, sect; - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) - prot++; - } - - if (prot) - printf("- Warning: %d protected sectors will not be erased!\n", - prot); - else - printf("\n"); - - cnt = s_last - s_first + 1; - - if (cnt == FLASH_TOT_SECT) { - printf("Erasing flash, Please Wait \n"); - if (erase_flash() < 0) { - printf("Erasing flash failed \n"); - return FLASH_FAIL; - } - } else { - printf("Erasing Flash locations, Please Wait\n"); - for (i = s_first; i <= s_last; i++) { - if (info->protect[i] == 0) { /* not protected */ - if (erase_block_flash(i, info->start[i]) < 0) { - printf("Error Sector erasing \n"); - return FLASH_FAIL; - } - } - } - } - return FLASH_SUCCESS; -} - -int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - int ret; - int d; - if (addr % 2) { - read_flash(addr - 1 - CONFIG_SYS_FLASH_BASE, &d); - d = (int)((d & 0x00FF) | (*src++ << 8)); - ret = write_data(addr - 1, 2, (uchar *) & d); - if (ret == FLASH_FAIL) - return ERR_NOT_ERASED; - ret = write_data(addr + 1, cnt - 1, src); - } else - ret = write_data(addr, cnt, src); - if (ret == FLASH_FAIL) - return ERR_NOT_ERASED; - return FLASH_SUCCESS; -} - -int write_data(long lStart, long lCount, uchar * pnData) -{ - long i = 0; - unsigned long ulOffset = lStart - CONFIG_SYS_FLASH_BASE; - int d; - int nSector = 0; - int flag = 0; - - if (lCount % 2) { - flag = 1; - lCount = lCount - 1; - } - - for (i = 0; i < lCount - 1; i += 2, ulOffset += 2) { - get_sector_number(ulOffset, &nSector); - read_flash(ulOffset, &d); - if (d != 0xffff) { - printf - ("Flash not erased at offset 0x%lx Please erase to reprogram\n", - ulOffset); - return FLASH_FAIL; - } - unlock_flash(ulOffset); - d = (int)(pnData[i] | pnData[i + 1] << 8); - write_flash(ulOffset, d); - if (poll_toggle_bit(ulOffset) < 0) { - printf("Error programming the flash \n"); - return FLASH_FAIL; - } - if ((i > 0) && (!(i % AFP_SectorSize2))) - printf("."); - } - if (flag) { - get_sector_number(ulOffset, &nSector); - read_flash(ulOffset, &d); - if (d != 0xffff) { - printf - ("Flash not erased at offset 0x%lx Please erase to reprogram\n", - ulOffset); - return FLASH_FAIL; - } - unlock_flash(ulOffset); - d = (int)(pnData[i] | (d & 0xFF00)); - write_flash(ulOffset, d); - if (poll_toggle_bit(ulOffset) < 0) { - printf("Error programming the flash \n"); - return FLASH_FAIL; - } - } - return FLASH_SUCCESS; -} - -int read_data(long ulStart, long lCount, long lStride, int *pnData) -{ - long i = 0; - int j = 0; - long ulOffset = ulStart; - int iShift = 0; - int iNumWords = 2; - int nLeftover = lCount % 4; - int nHi, nLow; - int nSector = 0; - - for (i = 0; (i < lCount / 4) && (i < BUFFER_SIZE); i++) { - for (iShift = 0, j = 0; j < iNumWords; j += 2) { - if ((ulOffset >= INVALIDLOCNSTART) - && (ulOffset < INVALIDLOCNEND)) - return FLASH_FAIL; - - get_sector_number(ulOffset, &nSector); - read_flash(ulOffset, &nLow); - ulOffset += (lStride * 2); - read_flash(ulOffset, &nHi); - ulOffset += (lStride * 2); - pnData[i] = (nHi << 16) | nLow; - } - } - if (nLeftover > 0) { - if ((ulOffset >= INVALIDLOCNSTART) - && (ulOffset < INVALIDLOCNEND)) - return FLASH_FAIL; - - get_sector_number(ulOffset, &nSector); - read_flash(ulOffset, &pnData[i]); - } - return FLASH_SUCCESS; -} - -int write_flash(long nOffset, int nValue) -{ - long addr; - - addr = (CONFIG_SYS_FLASH_BASE + nOffset); - SSYNC(); - *(unsigned volatile short *)addr = nValue; - SSYNC(); - if (poll_toggle_bit(nOffset) < 0) - return FLASH_FAIL; - return FLASH_SUCCESS; -} - -int read_flash(long nOffset, int *pnValue) -{ - int nValue = 0x0; - long addr = (CONFIG_SYS_FLASH_BASE + nOffset); - - if (nOffset != 0x2) - reset_flash(); - SSYNC(); - nValue = *(volatile unsigned short *)addr; - SSYNC(); - *pnValue = nValue; - return true; -} - -int poll_toggle_bit(long lOffset) -{ - unsigned int u1, u2; - unsigned long timeout = 0xFFFFFFFF; - volatile unsigned long *FB = - (volatile unsigned long *)(0x20000000 + lOffset); - while (1) { - if (timeout < 0) - break; - u1 = *(volatile unsigned short *)FB; - u2 = *(volatile unsigned short *)FB; - if ((u1 & 0x0040) == (u2 & 0x0040)) - return FLASH_SUCCESS; - if ((u2 & 0x0020) == 0x0000) - continue; - u1 = *(volatile unsigned short *)FB; - if ((u2 & 0x0040) == (u1 & 0x0040)) - return FLASH_SUCCESS; - else { - reset_flash(); - return FLASH_FAIL; - } - timeout--; - } - printf("Time out occurred \n"); - if (timeout < 0) - return FLASH_FAIL; -} - -void reset_flash(void) -{ - write_flash(WRITESEQ1, RESET_VAL); - /* Wait for 10 micro seconds */ - udelay(10); -} - -int erase_flash(void) -{ - write_flash(WRITESEQ1, WRITEDATA1); - write_flash(WRITESEQ2, WRITEDATA2); - write_flash(WRITESEQ3, WRITEDATA3); - write_flash(WRITESEQ4, WRITEDATA4); - write_flash(WRITESEQ5, WRITEDATA5); - write_flash(WRITESEQ6, WRITEDATA6); - - if (poll_toggle_bit(0x0000) < 0) - return FLASH_FAIL; - - write_flash(SecFlashAOff + WRITESEQ1, WRITEDATA1); - write_flash(SecFlashAOff + WRITESEQ2, WRITEDATA2); - write_flash(SecFlashAOff + WRITESEQ3, WRITEDATA3); - write_flash(SecFlashAOff + WRITESEQ4, WRITEDATA4); - write_flash(SecFlashAOff + WRITESEQ5, WRITEDATA5); - write_flash(SecFlashAOff + WRITESEQ6, WRITEDATA6); - - if (poll_toggle_bit(SecFlashASec1Off) < 0) - return FLASH_FAIL; - - write_flash(PriFlashBOff + WRITESEQ1, WRITEDATA1); - write_flash(PriFlashBOff + WRITESEQ2, WRITEDATA2); - write_flash(PriFlashBOff + WRITESEQ3, WRITEDATA3); - write_flash(PriFlashBOff + WRITESEQ4, WRITEDATA4); - write_flash(PriFlashBOff + WRITESEQ5, WRITEDATA5); - write_flash(PriFlashBOff + WRITESEQ6, WRITEDATA6); - - if (poll_toggle_bit(PriFlashBOff) < 0) - return FLASH_FAIL; - - write_flash(SecFlashBOff + WRITESEQ1, WRITEDATA1); - write_flash(SecFlashBOff + WRITESEQ2, WRITEDATA2); - write_flash(SecFlashBOff + WRITESEQ3, WRITEDATA3); - write_flash(SecFlashBOff + WRITESEQ4, WRITEDATA4); - write_flash(SecFlashBOff + WRITESEQ5, WRITEDATA5); - write_flash(SecFlashBOff + WRITESEQ6, WRITEDATA6); - - if (poll_toggle_bit(SecFlashBOff) < 0) - return FLASH_FAIL; - - return FLASH_SUCCESS; -} - -int erase_block_flash(int nBlock, unsigned long address) -{ - long ulSectorOff = 0x0; - - if ((nBlock < 0) || (nBlock > AFP_NumSectors)) - return false; - - ulSectorOff = (address - CONFIG_SYS_FLASH_BASE); - - write_flash((WRITESEQ1 | ulSectorOff), WRITEDATA1); - write_flash((WRITESEQ2 | ulSectorOff), WRITEDATA2); - write_flash((WRITESEQ3 | ulSectorOff), WRITEDATA3); - write_flash((WRITESEQ4 | ulSectorOff), WRITEDATA4); - write_flash((WRITESEQ5 | ulSectorOff), WRITEDATA5); - - write_flash(ulSectorOff, BlockEraseVal); - - if (poll_toggle_bit(ulSectorOff) < 0) - return FLASH_FAIL; - - return FLASH_SUCCESS; -} - -void unlock_flash(long ulOffset) -{ - unsigned long ulOffsetAddr = ulOffset; - ulOffsetAddr &= 0xFFFF0000; - - write_flash((WRITESEQ1 | ulOffsetAddr), UNLOCKDATA1); - write_flash((WRITESEQ2 | ulOffsetAddr), UNLOCKDATA2); - write_flash((WRITESEQ3 | ulOffsetAddr), UNLOCKDATA3); -} - -int get_codes() -{ - int dev_id = 0; - - write_flash(WRITESEQ1, GETCODEDATA1); - write_flash(WRITESEQ2, GETCODEDATA2); - write_flash(WRITESEQ3, GETCODEDATA3); - - read_flash(0x0002, &dev_id); - dev_id &= 0x00FF; - - reset_flash(); - - return dev_id; -} - -void get_sector_number(long ulOffset, int *pnSector) -{ - int nSector = 0; - - if (ulOffset >= SecFlashAOff) { - if ((ulOffset < SecFlashASec1Off) - && (ulOffset < SecFlashASec2Off)) { - nSector = SECT32; - } else if ((ulOffset >= SecFlashASec2Off) - && (ulOffset < SecFlashASec3Off)) { - nSector = SECT33; - } else if ((ulOffset >= SecFlashASec3Off) - && (ulOffset < SecFlashASec4Off)) { - nSector = SECT34; - } else if ((ulOffset >= SecFlashASec4Off) - && (ulOffset < SecFlashAEndOff)) { - nSector = SECT35; - } - } else if (ulOffset >= SecFlashBOff) { - if ((ulOffset < SecFlashBSec1Off) - && (ulOffset < SecFlashBSec2Off)) { - nSector = SECT36; - } - if ((ulOffset < SecFlashBSec2Off) - && (ulOffset < SecFlashBSec3Off)) { - nSector = SECT37; - } - if ((ulOffset < SecFlashBSec3Off) - && (ulOffset < SecFlashBSec4Off)) { - nSector = SECT38; - } - if ((ulOffset < SecFlashBSec4Off) - && (ulOffset < SecFlashBEndOff)) { - nSector = SECT39; - } - } else if ((ulOffset >= PriFlashAOff) && (ulOffset < SecFlashAOff)) { - nSector = ulOffset & 0xffff0000; - nSector = ulOffset >> 16; - nSector = nSector & 0x000ff; - } - - if ((nSector >= 0) && (nSector < AFP_NumSectors)) { - *pnSector = nSector; - } -} diff --git a/board/bf533-ezkit/psd4256.h b/board/bf533-ezkit/psd4256.h deleted file mode 100644 index 925669644e1..00000000000 --- a/board/bf533-ezkit/psd4256.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * U-Boot - psd4256.h - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Flash A/B Port A configuration registers. - * Addresses are offset values to CONFIG_SYS_FLASH1_BASE - * for Flash A and CONFIG_SYS_FLASH2_BASE for Flash B. - */ - -#define PSD_PORTA_DIN 0x070000 -#define PSD_PORTA_DOUT 0x070004 -#define PSD_PORTA_DIR 0x070006 - -/* - * Flash A/B Port B configuration registers - * Addresses are offset values to CONFIG_SYS_FLASH1_BASE - * for Flash A and CONFIG_SYS_FLASH2_BASE for Flash B. - */ - -#define PSD_PORTB_DIN 0x070001 -#define PSD_PORTB_DOUT 0x070005 -#define PSD_PORTB_DIR 0x070007 - -/* - * Flash A Port A Bit definitions - */ - -#define PSDA_PPICLK1 0x20 /* PPI Clock select bit 1 */ -#define PSDA_PPICLK0 0x10 /* PPI Clock select bit 0 */ -#define PSDA_VDEC_RST 0x08 /* Video decoder reset, 0 = RESET */ -#define PSDA_VENC_RST 0x04 /* Video encoder reset, 0 = RESET */ -#define PSDA_CODEC_RST 0x01 /* Codec reset, 0 = RESET */ - -/* - * Flash A Port B Bit definitions - */ - -#define PSDA_LED9 0x20 /* LED 9, 1 = LED ON */ -#define PSDA_LED8 0x10 /* LED 8, 1 = LED ON */ -#define PSDA_LED7 0x08 /* LED 7, 1 = LED ON */ -#define PSDA_LED6 0x04 /* LED 6, 1 = LED ON */ -#define PSDA_LED5 0x02 /* LED 5, 1 = LED ON */ -#define PSDA_LED4 0x01 /* LED 4, 1 = LED ON */ |