diff options
Diffstat (limited to 'board/atmel/at91sam9263ek/lowlevel_init.S')
-rw-r--r-- | board/atmel/at91sam9263ek/lowlevel_init.S | 264 |
1 files changed, 0 insertions, 264 deletions
diff --git a/board/atmel/at91sam9263ek/lowlevel_init.S b/board/atmel/at91sam9263ek/lowlevel_init.S deleted file mode 100644 index 3a957776df9..00000000000 --- a/board/atmel/at91sam9263ek/lowlevel_init.S +++ /dev/null @@ -1,264 +0,0 @@ -/* - * Memory Setup stuff - taken from blob memsetup.S - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and - * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) - * - * Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at) - * Copyright (C) 2009 Jean-Christopher PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_pio.h> -#include <asm/arch/at91_rstc.h> -#include <asm/arch/at91_wdt.h> -#include <asm/arch/at91sam9_sdramc.h> -#include <asm/arch/at91sam9_smc.h> -#include <asm/arch/at91sam9263_matrix.h> - -_TEXT_BASE: - .word TEXT_BASE - -.globl lowlevel_init -.type lowlevel_init,function -lowlevel_init: - - mov r5, pc /* r5 = POS1 + 4 current */ -POS1: - ldr r0, =POS1 /* r0 = POS1 compile */ - ldr r2, _TEXT_BASE - sub r0, r0, r2 /* r0 = POS1-_TEXT_BASE (POS1 relative) */ - sub r5, r5, r0 /* r0 = TEXT_BASE-1 */ - sub r5, r5, #4 /* r1 = text base - current */ - - /* memory control configuration 1 */ - ldr r0, =SMRDATA - ldr r2, =SMRDATA1 - ldr r1, _TEXT_BASE - sub r0, r0, r1 - sub r2, r2, r1 - add r0, r0, r5 - add r2, r2, r5 -0: - /* the address */ - ldr r1, [r0], #4 - /* the value */ - ldr r3, [r0], #4 - str r3, [r1] - cmp r2, r0 - bne 0b - -/* ---------------------------------------------------------------------------- - * PMC Init Step 1. - * ---------------------------------------------------------------------------- - * - Check if the PLL is already initialized - * ---------------------------------------------------------------------------- - */ - ldr r1, =(AT91_BASE_SYS + AT91_PMC_MCKR) - ldr r0, [r1] - and r0, r0, #3 - cmp r0, #0 - bne PLL_setup_end - -/* --------------------------------------------------------------------------- - * - Enable the Main Oscillator - * --------------------------------------------------------------------------- - */ - ldr r1, =(AT91_BASE_SYS + AT91_CKGR_MOR) - ldr r2, =(AT91_BASE_SYS + AT91_PMC_SR) - ldr r0, =CONFIG_SYS_MOR_VAL - str r0, [r1] /* Enable main oscillator, OSCOUNT = 0xFF */ - - /* Reading the PMC Status to detect when the Main Oscillator is enabled */ - mov r4, #AT91_PMC_MOSCS -MOSCS_Loop: - ldr r3, [r2] - and r3, r4, r3 - cmp r3, #AT91_PMC_MOSCS - bne MOSCS_Loop - -/* ---------------------------------------------------------------------------- - * PMC Init Step 2. - * ---------------------------------------------------------------------------- - * Setup PLLA - * ---------------------------------------------------------------------------- - */ - ldr r1, =(AT91_BASE_SYS + AT91_CKGR_PLLAR) - ldr r0, =CONFIG_SYS_PLLAR_VAL - str r0, [r1] - - /* Reading the PMC Status register to detect when the PLLA is locked */ - mov r4, #AT91_PMC_LOCKA -MOSCS_Loop1: - ldr r3, [r2] - and r3, r4, r3 - cmp r3, #AT91_PMC_LOCKA - bne MOSCS_Loop1 - -/* ---------------------------------------------------------------------------- - * PMC Init Step 3. - * ---------------------------------------------------------------------------- - * - Switch on the Main Oscillator 16.367 MHz - * ---------------------------------------------------------------------------- - */ - ldr r1, =(AT91_BASE_SYS + AT91_PMC_MCKR) - - /* -Master Clock Controller register PMC_MCKR */ - ldr r0, =CONFIG_SYS_MCKR1_VAL - str r0, [r1] - - /* Reading the PMC Status to detect when the Master clock is ready */ - mov r4, #AT91_PMC_MCKRDY -MCKRDY_Loop: - ldr r3, [r2] - and r3, r4, r3 - cmp r3, #AT91_PMC_MCKRDY - bne MCKRDY_Loop - - ldr r0, =CONFIG_SYS_MCKR2_VAL - str r0, [r1] - - /* Reading the PMC Status to detect when the Master clock is ready */ - mov r4, #AT91_PMC_MCKRDY -MCKRDY_Loop1: - ldr r3, [r2] - and r3, r4, r3 - cmp r3, #AT91_PMC_MCKRDY - bne MCKRDY_Loop1 - -PLL_setup_end: - -/* ---------------------------------------------------------------------------- - * - memory control configuration 2 - * ---------------------------------------------------------------------------- - */ - ldr r0, =(AT91_BASE_SYS + AT91_SDRAMC_TR) - ldr r1, [r0] - cmp r1, #0 - bne SDRAM_setup_end - - ldr r0, =SMRDATA1 - ldr r2, =SMRDATA2 - ldr r1, _TEXT_BASE - sub r0, r0, r1 - sub r2, r2, r1 - add r0, r0, r5 - add r2, r2, r5 - -2: - /* the address */ - ldr r1, [r0], #4 - /* the value */ - ldr r3, [r0], #4 - str r3, [r1] - cmp r2, r0 - bne 2b - -SDRAM_setup_end: - /* everything is fine now */ - mov pc, lr - - .ltorg - -SMRDATA: - .word (AT91_BASE_SYS + AT91_WDT_MR) - .word CONFIG_SYS_WDTC_WDMR_VAL - - .word (AT91_BASE_SYS + AT91_PIOD + PIO_PDR) - .word CONFIG_SYS_PIOD_PDR_VAL1 - .word (AT91_BASE_SYS + AT91_PIOD + PIO_PUDR) - .word CONFIG_SYS_PIOD_PPUDR_VAL - .word (AT91_BASE_SYS + AT91_PIOD + PIO_ASR) - .word CONFIG_SYS_PIOD_PPUDR_VAL - - .word (AT91_BASE_SYS + AT91_MATRIX_EBI0CSA) - .word CONFIG_SYS_MATRIX_EBI0CSA_VAL - - /* flash */ - .word (AT91_BASE_SYS + AT91_SMC_MODE(0)) - .word CONFIG_SYS_SMC0_MODE0_VAL - - .word (AT91_BASE_SYS + AT91_SMC_CYCLE(0)) - .word CONFIG_SYS_SMC0_CYCLE0_VAL - - .word (AT91_BASE_SYS + AT91_SMC_PULSE(0)) - .word CONFIG_SYS_SMC0_PULSE0_VAL - - .word (AT91_BASE_SYS + AT91_SMC_SETUP(0)) - .word CONFIG_SYS_SMC0_SETUP0_VAL - -SMRDATA1: - .word (AT91_BASE_SYS + AT91_SDRAMC_MR) - .word CONFIG_SYS_SDRC_MR_VAL1 - .word (AT91_BASE_SYS + AT91_SDRAMC_TR) - .word CONFIG_SYS_SDRC_TR_VAL1 - .word (AT91_BASE_SYS + AT91_SDRAMC_CR) - .word CONFIG_SYS_SDRC_CR_VAL - .word (AT91_BASE_SYS + AT91_SDRAMC_MDR) - .word CONFIG_SYS_SDRC_MDR_VAL - .word (AT91_BASE_SYS + AT91_SDRAMC_MR) - .word CONFIG_SYS_SDRC_MR_VAL2 - .word AT91_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL1 - .word (AT91_BASE_SYS + AT91_SDRAMC_MR) - .word CONFIG_SYS_SDRC_MR_VAL3 - .word AT91_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL2 - .word AT91_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL3 - .word AT91_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL4 - .word AT91_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL5 - .word AT91_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL6 - .word AT91_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL7 - .word AT91_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL8 - .word AT91_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL9 - .word (AT91_BASE_SYS + AT91_SDRAMC_MR) - .word CONFIG_SYS_SDRC_MR_VAL4 - .word AT91_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL10 - .word (AT91_BASE_SYS + AT91_SDRAMC_MR) - .word CONFIG_SYS_SDRC_MR_VAL5 - .word AT91_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL11 - .word (AT91_BASE_SYS + AT91_SDRAMC_TR) - .word CONFIG_SYS_SDRC_TR_VAL2 - .word AT91_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL12 - /* User reset enable*/ - .word (AT91_BASE_SYS + AT91_RSTC_MR) - .word CONFIG_SYS_RSTC_RMR_VAL -#ifdef CONFIG_SYS_MATRIX_MCFG_REMAP - /* MATRIX_MCFG - REMAP all masters */ - .word (AT91_BASE_SYS + AT91_MATRIX_MCFG0) - .word 0x1FF -#endif - -SMRDATA2: - .word 0 |