diff options
Diffstat (limited to 'board/at91sam9261ek/nand.c')
| -rw-r--r-- | board/at91sam9261ek/nand.c | 124 |
1 files changed, 124 insertions, 0 deletions
diff --git a/board/at91sam9261ek/nand.c b/board/at91sam9261ek/nand.c new file mode 100644 index 0000000000..ee33961000 --- /dev/null +++ b/board/at91sam9261ek/nand.c @@ -0,0 +1,124 @@ +/* + * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/hardware.h> + +#if (CONFIG_COMMANDS & CFG_CMD_NAND) + +#include <nand.h> + +/* + * hardware specific access to control-lines + */ +#define MASK_CLE (1 << 21) /* our ALE is AD22 */ +#define MASK_ALE (1 << 22) /* our CLE is AD21 */ + +/* + * Disk On Chip (NAND) Millenium initialization. + * The NAND lives in the CS3* space + */ +void at91sam9261ek_nand_init (struct nand_chip *nand) +{ + /* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */ + AT91C_BASE_MATRIX->MATRIX_EBICSA |= AT91C_MATRIX_CS3A_SM; + + /* Configure SMC CS3 */ + AT91C_BASE_SMC->SMC_SETUP3 = (AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | + AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP); + + AT91C_BASE_SMC->SMC_PULSE3 = (AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE); + + AT91C_BASE_SMC->SMC_CYCLE3 = (AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE); + + if ((nand->options & NAND_BUSWIDTH_16) == NAND_BUSWIDTH_16) + { + AT91C_BASE_SMC->SMC_CTRL3 = (AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | + AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF); + } else { + AT91C_BASE_SMC->SMC_CTRL3 = (AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | + AT91C_SMC_DBW_WIDTH_EIGTH_BITS | AT91C_SM_TDF); + } + + /* Clock PIOC */ + AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_PIOC; + + /* Configure Ready/Busy signal */ + AT91C_BASE_PIOC->PIO_ODR = AT91C_PIO_PC15; + AT91C_BASE_PIOC->PIO_PER = AT91C_PIO_PC15; + /* Configure pull-up */ + AT91C_BASE_PIOC->PIO_PPUER = AT91C_PIO_PC15; + + /* Enable PC0=SMOE line PC1=SMWE, A21=CLE, A22=ALE */ + AT91C_BASE_PIOC->PIO_ASR = (AT91C_PC0_SMOE | AT91C_PC1_SMWE); + AT91C_BASE_PIOC->PIO_PDR = (AT91C_PC0_SMOE | AT91C_PC1_SMWE); /* Set in Periph mode */ + + /* Enable NandFlash */ + AT91C_BASE_PIOC->PIO_PER = AT91C_PIO_PC14; + AT91C_BASE_PIOC->PIO_OER = AT91C_PIO_PC14; +} + +static void at91sam9261ek_nand_hwcontrol(struct mtd_info *mtd, int cmd) +{ + struct nand_chip *this = mtd->priv; + ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; + + IO_ADDR_W &= ~(MASK_ALE|MASK_CLE); + switch (cmd) { + case NAND_CTL_SETCLE: IO_ADDR_W |= MASK_CLE; break; + case NAND_CTL_SETALE: IO_ADDR_W |= MASK_ALE; break; + case NAND_CTL_CLRNCE: *AT91C_PIOC_SODR = AT91C_PIO_PC14; break; + case NAND_CTL_SETNCE: *AT91C_PIOC_CODR = AT91C_PIO_PC14; break; + } + this->IO_ADDR_W = (void *) IO_ADDR_W; +} + +/* + * chip R/B detection + */ +static int at91sam9261ek_nand_ready(struct mtd_info *mtd) +{ + return (*AT91C_PIOC_PDSR & AT91C_PIO_PC15); +} + +void board_nand_init(struct nand_chip *nand) +{ + /* Init due to switch 8/16 bits mode */ + if (nand->write_byte) + nand->write_byte = NULL; + if (nand->read_byte) + nand->read_byte = NULL; + if (nand->write_buf) + nand->write_buf = NULL; + if (nand->read_buf) + nand->read_buf = NULL; + if (nand->verify_buf) + nand->verify_buf = NULL; + + nand->eccmode = NAND_ECC_SOFT; + nand->hwcontrol = at91sam9261ek_nand_hwcontrol; + nand->dev_ready = at91sam9261ek_nand_ready; + nand->chip_delay = 18; + + at91sam9261ek_nand_init(nand); +} +#endif |