summaryrefslogtreecommitdiff
path: root/board/actux2/actux2.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/actux2/actux2.c')
-rw-r--r--board/actux2/actux2.c122
1 files changed, 0 insertions, 122 deletions
diff --git a/board/actux2/actux2.c b/board/actux2/actux2.c
deleted file mode 100644
index e578cd0996..0000000000
--- a/board/actux2/actux2.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * (C) Copyright 2007
- * Michael Schwingen, michael@schwingen.org
- *
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <asm/arch/ixp425.h>
-#include <asm/io.h>
-
-#include <miiphy.h>
-
-#include "actux2_hw.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
- /* CS1: IPAC-X */
- writel(0x94d10013, IXP425_EXP_CS1);
- /* CS5: Debug port */
- writel(0x9d520003, IXP425_EXP_CS5);
- /* CS6: HW release register */
- writel(0x81860001, IXP425_EXP_CS6);
- /* CS7: LEDs */
- writel(0x80900003, IXP425_EXP_CS7);
-
- return 0;
-}
-
-int board_init(void)
-{
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x00000100;
-
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_ETHRST);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DSR);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DCD);
-
- GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST);
- GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_ETHRST);
-
- GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_DSR);
- GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_DCD);
-
- /* Setup GPIOs for Interrupt inputs */
- GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_DBGINT);
- GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_ETHINT);
-
- /* Setup GPIOs for 33MHz clock output */
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK);
- writel(0x011001FF, IXP425_GPIO_GPCLKR);
-
- udelay(533);
- GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST);
- GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_ETHRST);
-
- ACTUX2_LED1(1);
- ACTUX2_LED2(0);
- ACTUX2_LED3(0);
- ACTUX2_LED4(0);
-
- return 0;
-}
-
-/*
- * Check Board Identity
- */
-int checkboard(void)
-{
- char buf[64];
- int i = getenv_f("serial#", buf, sizeof(buf));
-
- puts("Board: AcTux-2 rev.");
- putc(ACTUX2_BOARDREL + 'A' - 1);
-
- if (i > 0) {
- puts(", serial# ");
- puts(buf);
- }
- putc('\n');
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20);
- return 0;
-}
-
-/*************************************************************************
- * get_board_rev() - setup to pass kernel board revision information
- * 0 = reserved
- * 1 = Rev. A
- * 2 = Rev. B
- *************************************************************************/
-u32 get_board_rev(void)
-{
- return ACTUX2_BOARDREL;
-}
-
-void reset_phy(void)
-{
- /* init IcPlus IP175C ethernet switch to native IP175C mode */
- miiphy_write("NPE0", 29, 31, 0x175C);
-}