summaryrefslogtreecommitdiff
path: root/board/Marvell/db64360/mv_eth.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/Marvell/db64360/mv_eth.c')
-rw-r--r--board/Marvell/db64360/mv_eth.c62
1 files changed, 31 insertions, 31 deletions
diff --git a/board/Marvell/db64360/mv_eth.c b/board/Marvell/db64360/mv_eth.c
index e5a87ad2952..dfc0bf7d307 100644
--- a/board/Marvell/db64360/mv_eth.c
+++ b/board/Marvell/db64360/mv_eth.c
@@ -1391,7 +1391,7 @@ u32 mv_get_internal_sram_base (void)
* port_phy_addr).
*
* INPUT:
-* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
+* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
*
* OUTPUT:
* See description.
@@ -1551,7 +1551,7 @@ static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl)
* ether_init_rx_desc_ring for Rx queues).
*
* INPUT:
-* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
+* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
*
* OUTPUT:
* Ethernet port is ready to receive and transmit.
@@ -1641,7 +1641,7 @@ static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl)
* INPUT:
* ETH_PORT eth_port_num Port number.
* char * p_addr Address to be set
-* ETH_QUEUE queue Rx queue number for this MAC address.
+* ETH_QUEUE queue Rx queue number for this MAC address.
*
* OUTPUT:
* Set MAC address low and high registers. also calls eth_port_uc_addr()
@@ -1679,10 +1679,10 @@ static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
* parameters.
*
* INPUT:
-* ETH_PORT eth_port_num Port number.
+* ETH_PORT eth_port_num Port number.
* unsigned char uc_nibble Unicast MAC Address last nibble.
-* ETH_QUEUE queue Rx queue number for this MAC address.
-* int option 0 = Add, 1 = remove address.
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
*
* OUTPUT:
* This function add/removes MAC addresses from the port unicast address
@@ -1761,10 +1761,10 @@ static bool eth_port_uc_addr (ETH_PORT eth_port_num,
* In this case, the function calculates the CRC-8bit value and calls
* eth_port_omc_addr() routine to set the Other Multicast Table.
* INPUT:
-* ETH_PORT eth_port_num Port number.
-* unsigned char *p_addr Unicast MAC Address.
-* ETH_QUEUE queue Rx queue number for this MAC address.
-* int option 0 = Add, 1 = remove address.
+* ETH_PORT eth_port_num Port number.
+* unsigned char *p_addr Unicast MAC Address.
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
*
* OUTPUT:
* See description.
@@ -1895,10 +1895,10 @@ static void eth_port_mc_addr (ETH_PORT eth_port_num,
* according to the argument given.
*
* INPUT:
-* ETH_PORT eth_port_num Port number.
-* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits).
-* ETH_QUEUE queue Rx queue number for this MAC address.
-* int option 0 = Add, 1 = remove address.
+* ETH_PORT eth_port_num Port number.
+* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits).
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
*
* OUTPUT:
* See description.
@@ -1959,10 +1959,10 @@ static bool eth_port_smc_addr (ETH_PORT eth_port_num,
* CRC-8 argument given.
*
* INPUT:
-* ETH_PORT eth_port_num Port number.
-* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1).
-* ETH_QUEUE queue Rx queue number for this MAC address.
-* int option 0 = Add, 1 = remove address.
+* ETH_PORT eth_port_num Port number.
+* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1).
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
*
* OUTPUT:
* See description.
@@ -2203,7 +2203,7 @@ static bool ethernet_phy_reset (ETH_PORT eth_port_num)
* eth_port_reset - Reset Ethernet port
*
* DESCRIPTION:
- * This routine resets the chip by aborting any SDMA engine activity and
+ * This routine resets the chip by aborting any SDMA engine activity and
* clearing the MIB counters. The Receiver and the Transmit unit are in
* idle state after this command is performed and the port is disabled.
*
@@ -2556,9 +2556,9 @@ static void eth_set_access_control (ETH_PORT eth_port_num,
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE rx_queue Number of Rx queue.
- * int rx_desc_num Number of Rx descriptors
- * int rx_buff_size Size of Rx buffer
+ * ETH_QUEUE rx_queue Number of Rx queue.
+ * int rx_desc_num Number of Rx descriptors
+ * int rx_buff_size Size of Rx buffer
* unsigned int rx_desc_base_addr Rx descriptors memory area base addr.
* unsigned int rx_buff_base_addr Rx buffer memory area base addr.
*
@@ -2650,9 +2650,9 @@ static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE tx_queue Number of Tx queue.
- * int tx_desc_num Number of Tx descriptors
- * int tx_buff_size Size of Tx buffer
+ * ETH_QUEUE tx_queue Number of Tx queue.
+ * int tx_desc_num Number of Tx descriptors
+ * int tx_buff_size Size of Tx buffer
* unsigned int tx_desc_base_addr Tx descriptors memory area base addr.
* unsigned int tx_buff_base_addr Tx buffer memory area base addr.
*
@@ -2745,7 +2745,7 @@ static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE tx_queue Number of Tx queue.
+ * ETH_QUEUE tx_queue Number of Tx queue.
* PKT_INFO *p_pkt_info User packet buffer.
*
* OUTPUT:
@@ -2861,7 +2861,7 @@ static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl,
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE tx_queue Number of Tx queue.
+ * ETH_QUEUE tx_queue Number of Tx queue.
* PKT_INFO *p_pkt_info User packet buffer.
*
* OUTPUT:
@@ -2930,7 +2930,7 @@ static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
* eth_port_receive - Get received information from Rx ring.
*
* DESCRIPTION:
- * This routine returns the received data to the caller. There is no
+ * This routine returns the received data to the caller. There is no
* data copying during routine operation. All information is returned
* using pointer to packet information struct passed from the caller.
* If the routine exhausts Rx ring resources then the resource error flag
@@ -2938,7 +2938,7 @@ static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE rx_queue Number of Rx queue.
+ * ETH_QUEUE rx_queue Number of Rx queue.
* PKT_INFO *p_pkt_info User packet buffer.
*
* OUTPUT:
@@ -2980,7 +2980,7 @@ static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
/* Nothing to receive... */
if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
-/* DP(printf("Rx: command_status: %08x\n", command_status)); */
+/* DP(printf("Rx: command_status: %08x\n", command_status)); */
D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
/* DP(printf("\nETH_END_OF_JOB ...\n"));*/
return ETH_END_OF_JOB;
@@ -3019,7 +3019,7 @@ static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE rx_queue Number of Rx queue.
+ * ETH_QUEUE rx_queue Number of Rx queue.
* PKT_INFO *p_pkt_info Information on the returned buffer.
*
* OUTPUT: