summaryrefslogtreecommitdiff
path: root/board/MAI/bios_emulator/scitech/src
diff options
context:
space:
mode:
Diffstat (limited to 'board/MAI/bios_emulator/scitech/src')
-rw-r--r--board/MAI/bios_emulator/scitech/src/biosemu/besys.c408
-rw-r--r--board/MAI/bios_emulator/scitech/src/biosemu/bios.c250
-rw-r--r--board/MAI/bios_emulator/scitech/src/biosemu/biosemu.c445
-rw-r--r--board/MAI/bios_emulator/scitech/src/biosemu/biosemui.h79
-rw-r--r--board/MAI/bios_emulator/scitech/src/biosemu/makefile99
-rw-r--r--board/MAI/bios_emulator/scitech/src/biosemu/makefile.cross10
-rw-r--r--board/MAI/bios_emulator/scitech/src/biosemu/warmboot.c569
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/_aa_imp.asm51
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/_ga_imp.asm136
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/_gatimer.asm248
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/_pm_imp.asm195
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/aabeos.c92
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/aados.c64
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/aalib.c225
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/aalinux.c94
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/aaos2.c124
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/aaqnx.c95
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/aartt.c89
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/aasmx.c83
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/aavxd.c90
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/aawin32.c264
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/agplib.c219
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/center.c122
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/cmdline.c428
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/gabeos.c146
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/gados.c135
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/galib.c268
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/galinux.c148
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/gantdrv.c136
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/gaos2.c248
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/gaqnx.c149
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/gartt.c139
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/gasmx.c133
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/gavxd.c136
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/gawin32.c255
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/gtfcalc.c436
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/libcimp.c827
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/makefile18
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/peloader.c586
-rw-r--r--board/MAI/bios_emulator/scitech/src/common/vesavbe.c1214
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/beos/cpuinfo.c80
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/beos/event.c199
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/beos/oshdr.h32
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/beos/pm.c539
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/beos/vflat.c49
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/beos/ztimer.c111
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/codepage/us_eng.c285
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/common.c480
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/common/_cpuinfo.asm600
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/common/_dma.asm246
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/common/_int64.asm309
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/common/_joy.asm230
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/common/_mtrr.asm272
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/common/_pcihelp.asm358
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/common/agp.c189
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/common/keyboard.c449
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/common/malloc.c205
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/common/mtrr.c867
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/common/pcilib.c747
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/common/unixio.c306
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/common/vgastate.c377
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/cpuinfo.c808
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/debug.c107
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/dos/_event.asm194
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/dos/_lztimer.asm438
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/dos/_pm.asm656
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/dos/_pmdos.asm1105
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/dos/_vflat.asm652
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/dos/cpuinfo.c72
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/dos/event.c494
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/dos/oshdr.h29
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/dos/pm.c2243
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/dos/pmdos.c1637
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/dos/vflat.c251
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/dos/ztimer.c111
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/event.c1115
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/linux/cpuinfo.c68
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/linux/event.c1360
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/linux/event.svga1058
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/linux/oshdr.h60
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/linux/pm.c1809
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/linux/vflat.c49
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/linux/ztimer.c95
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/makefile290
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/ntdrv/_irq.asm288
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/ntdrv/_pm.asm281
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/ntdrv/cpuinfo.c64
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/ntdrv/int86.c251
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/ntdrv/irq.c142
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/ntdrv/mem.c518
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/ntdrv/oshdr.h45
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/ntdrv/pm.c933
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/ntdrv/stdio.c330
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/ntdrv/stdlib.c139
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/ntdrv/vflat.c45
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/ntdrv/ztimer.c123
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/os2/_pmos2.asm180
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/os2/cpuinfo.c66
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/os2/event.c565
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/os2/mon.h165
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/os2/oshdr.h41
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/os2/pm.c2008
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/os2/vflat.c49
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/os2/ztimer.c110
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/os2pm/event.c170
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/os2pm/oshdr.h36
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/oshdr.h70
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/photon/event.c268
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/photon/oshdr.h38
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/pm.vpw43
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/pmcommon.vpj45
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/pmdos.vpj41
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/pmlinux.vpj35
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/pmntdrv.vpj39
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/pmqnx.vpj35
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/pmvxd.vpj34
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/pmwin32.vpj35
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/qnx/_mtrrqnx.asm226
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/qnx/cpuinfo.c64
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/qnx/event.c601
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/qnx/mtrrqnx.c182
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/qnx/oshdr.h103
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/qnx/pm.c891
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/qnx/vflat.c49
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/qnx/ztimer.c91
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/rttarget/cpuinfo.c94
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/rttarget/event.c287
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/rttarget/oshdr.h34
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/rttarget/pm.c701
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/rttarget/vflat.c48
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/rttarget/ztimer.c136
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/smx/_event.asm175
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/smx/_lztimer.asm58
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/smx/_pm.asm448
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/smx/_pmsmx.asm933
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/smx/_vflat.asm652
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/smx/cpuinfo.c72
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/smx/event.c368
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/smx/oshdr.h29
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/smx/pm.c1187
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/smx/pmsmx.c471
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/smx/vflat.c49
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/smx/ztimer.c115
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/stub/cpuinfo.c79
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/stub/event.c199
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/stub/oshdr.h33
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/stub/pm.c980
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/stub/vflat.c49
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/stub/ztimer.c111
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/altbrk.c90
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/altcrit.c85
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/biosptr.c92
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/block.c69
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/brk.c78
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/callreal.c107
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/checks.c100
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/cpu.c46
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/critical.c70
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/getch.c501
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/isvesa.c110
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/key.c92
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/key15.c96
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/memtest.c106
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/mouse.c109
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/restore.c81
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/rtc.c92
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/save.c69
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/showpci.c253
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/tick.c94
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/timerc.c87
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/timercpp.cpp107
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/uswc.c311
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/vftest.c78
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/tests/video.c199
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/vdd/cpuinfo.c66
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/vdd/fileio.c359
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/vdd/oshdr.h29
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/vdd/pm.c1050
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/vdd/vflat.c45
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/vdd/ztimer.c103
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/vxd/_pm.asm299
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/vxd/cpuinfo.c66
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/vxd/fileio.c304
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/vxd/oshdr.h29
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/vxd/pm.c1359
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/vxd/vflat.c45
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/vxd/ztimer.c105
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/win32/_pmwin32.asm78
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/win32/cpuinfo.c94
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/win32/ddraw.c582
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/win32/event.c459
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/win32/ntservc.c258
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/win32/oshdr.h79
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/win32/pm.c1459
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/win32/vflat.c53
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/win32/ztimer.c136
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/x11/event.c307
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/x11/oshdr.h38
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/z_samples.vpj74
-rw-r--r--board/MAI/bios_emulator/scitech/src/pm/ztimer.c516
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/AsmMacros.h450
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/README32
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/awk.scr15
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/cbios.c415
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/command.c38
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/console.c95
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/debug.h60
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/happy_cards76
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/hexdump3
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/int.c238
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/io.c257
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/lex.l79
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/main.c616
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/makefile.linux59
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/mem.c124
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/parser.y498
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/pci.c902
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/pci.h127
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/v86.c562
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/v86bios.c933
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/v86bios.h214
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/working_cards7
-rw-r--r--board/MAI/bios_emulator/scitech/src/v86bios/x86emu.c316
-rw-r--r--board/MAI/bios_emulator/scitech/src/x86emu/LICENSE17
-rw-r--r--board/MAI/bios_emulator/scitech/src/x86emu/debug.c443
-rw-r--r--board/MAI/bios_emulator/scitech/src/x86emu/decode.c970
-rw-r--r--board/MAI/bios_emulator/scitech/src/x86emu/fpu.c945
-rw-r--r--board/MAI/bios_emulator/scitech/src/x86emu/makefile63
-rw-r--r--board/MAI/bios_emulator/scitech/src/x86emu/makefile.cross82
-rw-r--r--board/MAI/bios_emulator/scitech/src/x86emu/makefile.linux81
-rw-r--r--board/MAI/bios_emulator/scitech/src/x86emu/makefile.uboot80
-rw-r--r--board/MAI/bios_emulator/scitech/src/x86emu/ops.c11701
-rw-r--r--board/MAI/bios_emulator/scitech/src/x86emu/ops2.c2800
-rw-r--r--board/MAI/bios_emulator/scitech/src/x86emu/prim_ops.c2914
-rw-r--r--board/MAI/bios_emulator/scitech/src/x86emu/sys.c658
-rw-r--r--board/MAI/bios_emulator/scitech/src/x86emu/validate.c765
-rw-r--r--board/MAI/bios_emulator/scitech/src/x86emu/x86emu/debug.h210
-rw-r--r--board/MAI/bios_emulator/scitech/src/x86emu/x86emu/decode.h87
-rw-r--r--board/MAI/bios_emulator/scitech/src/x86emu/x86emu/fpu.h61
-rw-r--r--board/MAI/bios_emulator/scitech/src/x86emu/x86emu/ops.h45
-rw-r--r--board/MAI/bios_emulator/scitech/src/x86emu/x86emu/prim_asm.h970
-rw-r--r--board/MAI/bios_emulator/scitech/src/x86emu/x86emu/prim_ops.h231
-rw-r--r--board/MAI/bios_emulator/scitech/src/x86emu/x86emu/x86emui.h98
243 files changed, 0 insertions, 88282 deletions
diff --git a/board/MAI/bios_emulator/scitech/src/biosemu/besys.c b/board/MAI/bios_emulator/scitech/src/biosemu/besys.c
deleted file mode 100644
index 1512ce9bf9..0000000000
--- a/board/MAI/bios_emulator/scitech/src/biosemu/besys.c
+++ /dev/null
@@ -1,408 +0,0 @@
-/****************************************************************************
-*
-* BIOS emulator and interface
-* to Realmode X86 Emulator Library
-*
-* Copyright (C) 1996-1999 SciTech Software, Inc.
-*
-* ========================================================================
-*
-* Permission to use, copy, modify, distribute, and sell this software and
-* its documentation for any purpose is hereby granted without fee,
-* provided that the above copyright notice appear in all copies and that
-* both that copyright notice and this permission notice appear in
-* supporting documentation, and that the name of the authors not be used
-* in advertising or publicity pertaining to distribution of the software
-* without specific, written prior permission. The authors makes no
-* representations about the suitability of this software for any purpose.
-* It is provided "as is" without express or implied warranty.
-*
-* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-* Developer: Kendall Bennett
-*
-* Description: This file includes BIOS emulator I/O and memory access
-* functions.
-*
-****************************************************************************/
-
-#include "biosemui.h"
-
-/*------------------------------- Macros ----------------------------------*/
-
-/* Macros to read and write values to x86 bus memory. Replace these as
- * necessary if you need to do something special to access memory over
- * the bus on a particular processor family.
- */
-
-#define readb(base,off) *((u8*)((u32)(base) + (off)))
-#define readw(base,off) *((u16*)((u32)(base) + (off)))
-#define readl(base,off) *((u32*)((u32)(base) + (off)))
-#define writeb(v,base,off) *((u8*)((u32)(base) + (off))) = (v)
-#define writew(v,base,off) *((u16*)((u32)(base) + (off))) = (v)
-#define writel(v,base,off) *((u32*)((u32)(base) + (off))) = (v)
-
-/*----------------------------- Implementation ----------------------------*/
-
-#ifdef DEBUG
-# define DEBUG_MEM() (M.x86.debug & DEBUG_MEM_TRACE_F)
-#else
-# define DEBUG_MEM()
-#endif
-
-/****************************************************************************
-PARAMETERS:
-addr - Emulator memory address to read
-
-RETURNS:
-Byte value read from emulator memory.
-
-REMARKS:
-Reads a byte value from the emulator memory. We have three distinct memory
-regions that are handled differently, which this function handles.
-****************************************************************************/
-u8 X86API BE_rdb(
- u32 addr)
-{
- u8 val = 0;
-
- if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) {
- val = *(u8*)(_BE_env.biosmem_base + addr - 0xC0000);
- }
- else if (addr >= 0xA0000 && addr <= 0xFFFFF) {
- val = readb(_BE_env.busmem_base, addr - 0xA0000);
- }
- else if (addr > M.mem_size - 1) {
-DB( printk("mem_read: address %#lx out of range!\n", addr);)
- HALT_SYS();
- }
- else {
- val = *(u8*)(M.mem_base + addr);
- }
-DB( if (DEBUG_MEM())
- printk("%#08x 1 -> %#x\n", addr, val);)
- return val;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr - Emulator memory address to read
-
-RETURNS:
-Word value read from emulator memory.
-
-REMARKS:
-Reads a word value from the emulator memory. We have three distinct memory
-regions that are handled differently, which this function handles.
-****************************************************************************/
-u16 X86API BE_rdw(
- u32 addr)
-{
- u16 val = 0;
-
- if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) {
-#ifdef __BIG_ENDIAN__
- if (addr & 0x1) {
- addr -= 0xC0000;
- val = ( *(u8*)(_BE_env.biosmem_base + addr) |
- (*(u8*)(_BE_env.biosmem_base + addr + 1) << 8));
- }
- else
-#endif
- val = *(u16*)(_BE_env.biosmem_base + addr - 0xC0000);
- }
- else if (addr >= 0xA0000 && addr <= 0xFFFFF) {
-#ifdef __BIG_ENDIAN__
- if (addr & 0x1) {
- addr -= 0xA0000;
- val = ( readb(_BE_env.busmem_base, addr) |
- (readb(_BE_env.busmem_base, addr + 1) << 8));
- }
- else
-#endif
- val = readw(_BE_env.busmem_base, addr - 0xA0000);
- }
- else if (addr > M.mem_size - 2) {
-DB( printk("mem_read: address %#lx out of range!\n", addr);)
- HALT_SYS();
- }
- else {
-#ifdef __BIG_ENDIAN__
- if (addr & 0x1) {
- val = ( *(u8*)(M.mem_base + addr) |
- (*(u8*)(M.mem_base + addr + 1) << 8));
- }
- else
-#endif
- val = *(u16*)(M.mem_base + addr);
- }
-DB( if (DEBUG_MEM())
- printk("%#08x 2 -> %#x\n", addr, val);)
- return val;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr - Emulator memory address to read
-
-RETURNS:
-Long value read from emulator memory.
-
-REMARKS:
-Reads a long value from the emulator memory. We have three distinct memory
-regions that are handled differently, which this function handles.
-****************************************************************************/
-u32 X86API BE_rdl(
- u32 addr)
-{
- u32 val = 0;
-
- if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) {
-#ifdef __BIG_ENDIAN__
- if (addr & 0x3) {
- addr -= 0xC0000;
- val = ( *(u8*)(_BE_env.biosmem_base + addr + 0) |
- (*(u8*)(_BE_env.biosmem_base + addr + 1) << 8) |
- (*(u8*)(_BE_env.biosmem_base + addr + 2) << 16) |
- (*(u8*)(_BE_env.biosmem_base + addr + 3) << 24));
- }
- else
-#endif
- val = *(u32*)(_BE_env.biosmem_base + addr - 0xC0000);
- }
- else if (addr >= 0xA0000 && addr <= 0xFFFFF) {
-#ifdef __BIG_ENDIAN__
- if (addr & 0x3) {
- addr -= 0xA0000;
- val = ( readb(_BE_env.busmem_base, addr) |
- (readb(_BE_env.busmem_base, addr + 1) << 8) |
- (readb(_BE_env.busmem_base, addr + 2) << 16) |
- (readb(_BE_env.busmem_base, addr + 3) << 24));
- }
- else
-#endif
- val = readl(_BE_env.busmem_base, addr - 0xA0000);
- }
- else if (addr > M.mem_size - 4) {
-DB( printk("mem_read: address %#lx out of range!\n", addr);)
- HALT_SYS();
- }
- else {
-#ifdef __BIG_ENDIAN__
- if (addr & 0x3) {
- val = ( *(u8*)(M.mem_base + addr + 0) |
- (*(u8*)(M.mem_base + addr + 1) << 8) |
- (*(u8*)(M.mem_base + addr + 2) << 16) |
- (*(u8*)(M.mem_base + addr + 3) << 24));
- }
- else
-#endif
- val = *(u32*)(M.mem_base + addr);
- }
-DB( if (DEBUG_MEM())
- printk("%#08x 4 -> %#x\n", addr, val);)
- return val;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr - Emulator memory address to read
-val - Value to store
-
-REMARKS:
-Writes a byte value to emulator memory. We have three distinct memory
-regions that are handled differently, which this function handles.
-****************************************************************************/
-void X86API BE_wrb(
- u32 addr,
- u8 val)
-{
-DB( if (DEBUG_MEM())
- printk("%#08x 1 <- %#x\n", addr, val);)
- if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) {
- *(u8*)(_BE_env.biosmem_base + addr - 0xC0000) = val;
- }
- else if (addr >= 0xA0000 && addr <= 0xFFFFF) {
- writeb(val, _BE_env.busmem_base, addr - 0xA0000);
- }
- else if (addr > M.mem_size-1) {
-DB( printk("mem_write: address %#lx out of range!\n", addr);)
- HALT_SYS();
- }
- else {
- *(u8*)(M.mem_base + addr) = val;
- }
-}
-
-/****************************************************************************
-PARAMETERS:
-addr - Emulator memory address to read
-val - Value to store
-
-REMARKS:
-Writes a word value to emulator memory. We have three distinct memory
-regions that are handled differently, which this function handles.
-****************************************************************************/
-void X86API BE_wrw(
- u32 addr,
- u16 val)
-{
-DB( if (DEBUG_MEM())
- printk("%#08x 2 <- %#x\n", addr, val);)
- if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) {
-#ifdef __BIG_ENDIAN__
- if (addr & 0x1) {
- addr -= 0xC0000;
- *(u8*)(_BE_env.biosmem_base + addr + 0) = (val >> 0) & 0xff;
- *(u8*)(_BE_env.biosmem_base + addr + 1) = (val >> 8) & 0xff;
- }
- else
-#endif
- *(u16*)(_BE_env.biosmem_base + addr - 0xC0000) = val;
- }
- else if (addr >= 0xA0000 && addr <= 0xFFFFF) {
-#ifdef __BIG_ENDIAN__
- if (addr & 0x1) {
- addr -= 0xA0000;
- writeb(val >> 0, _BE_env.busmem_base, addr);
- writeb(val >> 8, _BE_env.busmem_base, addr + 1);
- }
- else
-#endif
- writew(val, _BE_env.busmem_base, addr - 0xA0000);
- }
- else if (addr > M.mem_size-2) {
-DB( printk("mem_write: address %#lx out of range!\n", addr);)
- HALT_SYS();
- }
- else {
-#ifdef __BIG_ENDIAN__
- if (addr & 0x1) {
- *(u8*)(M.mem_base + addr + 0) = (val >> 0) & 0xff;
- *(u8*)(M.mem_base + addr + 1) = (val >> 8) & 0xff;
- }
- else
-#endif
- *(u16*)(M.mem_base + addr) = val;
- }
-}
-
-/****************************************************************************
-PARAMETERS:
-addr - Emulator memory address to read
-val - Value to store
-
-REMARKS:
-Writes a long value to emulator memory. We have three distinct memory
-regions that are handled differently, which this function handles.
-****************************************************************************/
-void X86API BE_wrl(
- u32 addr,
- u32 val)
-{
-DB( if (DEBUG_MEM())
- printk("%#08x 4 <- %#x\n", addr, val);)
- if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) {
-#ifdef __BIG_ENDIAN__
- if (addr & 0x1) {
- addr -= 0xC0000;
- *(u8*)(M.mem_base + addr + 0) = (val >> 0) & 0xff;
- *(u8*)(M.mem_base + addr + 1) = (val >> 8) & 0xff;
- *(u8*)(M.mem_base + addr + 2) = (val >> 16) & 0xff;
- *(u8*)(M.mem_base + addr + 3) = (val >> 24) & 0xff;
- }
- else
-#endif
- *(u32*)(M.mem_base + addr - 0xC0000) = val;
- }
- else if (addr >= 0xA0000 && addr <= 0xFFFFF) {
-#ifdef __BIG_ENDIAN__
- if (addr & 0x3) {
- addr -= 0xA0000;
- writeb(val >> 0, _BE_env.busmem_base, addr);
- writeb(val >> 8, _BE_env.busmem_base, addr + 1);
- writeb(val >> 16, _BE_env.busmem_base, addr + 1);
- writeb(val >> 24, _BE_env.busmem_base, addr + 1);
- }
- else
-#endif
- writel(val, _BE_env.busmem_base, addr - 0xA0000);
- }
- else if (addr > M.mem_size-4) {
-DB( printk("mem_write: address %#lx out of range!\n", addr);)
- HALT_SYS();
- }
- else {
-#ifdef __BIG_ENDIAN__
- if (addr & 0x1) {
- *(u8*)(M.mem_base + addr + 0) = (val >> 0) & 0xff;
- *(u8*)(M.mem_base + addr + 1) = (val >> 8) & 0xff;
- *(u8*)(M.mem_base + addr + 2) = (val >> 16) & 0xff;
- *(u8*)(M.mem_base + addr + 3) = (val >> 24) & 0xff;
- }
- else
-#endif
- *(u32*)(M.mem_base + addr) = val;
- }
-}
-
-/* Debug functions to do ISA/PCI bus port I/O */
-
-#ifdef DEBUG
-#define DEBUG_IO() (M.x86.debug & DEBUG_IO_TRACE_F)
-
-u8 X86API BE_inb(int port)
-{
- u8 val = PM_inpb(port);
- if (DEBUG_IO())
- printk("%04X:%04X: inb.%04X -> %02X\n",M.x86.saved_cs, M.x86.saved_ip, (ushort)port, val);
- return val;
-}
-
-u16 X86API BE_inw(int port)
-{
- u16 val = PM_inpw(port);
- if (DEBUG_IO())
- printk("%04X:%04X: inw.%04X -> %04X\n",M.x86.saved_cs, M.x86.saved_ip, (ushort)port, val);
- return val;
-}
-
-u32 X86API BE_inl(int port)
-{
- u32 val = PM_inpd(port);
- if (DEBUG_IO())
- printk("%04X:%04X: inl.%04X -> %08X\n",M.x86.saved_cs, M.x86.saved_ip, (ushort)port, val);
- return val;
-}
-
-void X86API BE_outb(int port, u8 val)
-{
- if (DEBUG_IO())
- printk("%04X:%04X: outb.%04X <- %02X\n",M.x86.saved_cs, M.x86.saved_ip, (ushort)port, val);
- PM_outpb(port,val);
-}
-
-void X86API BE_outw(int port, u16 val)
-{
- if (DEBUG_IO())
- printk("%04X:%04X: outw.%04X <- %04X\n",M.x86.saved_cs, M.x86.saved_ip, (ushort)port, val);
- PM_outpw(port,val);
-}
-
-void X86API BE_outl(int port, u32 val)
-{
- if (DEBUG_IO())
- printk("%04X:%04X: outl.%04X <- %08X\n",M.x86.saved_cs, M.x86.saved_ip, (ushort)port, val);
- PM_outpd(port,val);
-}
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/biosemu/bios.c b/board/MAI/bios_emulator/scitech/src/biosemu/bios.c
deleted file mode 100644
index c0f4a4b18e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/biosemu/bios.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/****************************************************************************
-*
-* BIOS emulator and interface
-* to Realmode X86 Emulator Library
-*
-* Copyright (C) 1996-1999 SciTech Software, Inc.
-*
-* ========================================================================
-*
-* Permission to use, copy, modify, distribute, and sell this software and
-* its documentation for any purpose is hereby granted without fee,
-* provided that the above copyright notice appear in all copies and that
-* both that copyright notice and this permission notice appear in
-* supporting documentation, and that the name of the authors not be used
-* in advertising or publicity pertaining to distribution of the software
-* without specific, written prior permission. The authors makes no
-* representations about the suitability of this software for any purpose.
-* It is provided "as is" without express or implied warranty.
-*
-* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-* Developer: Kendall Bennett
-*
-* Description: Module implementing the BIOS specific functions.
-*
-****************************************************************************/
-
-#include "biosemui.h"
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-intno - Interrupt number being serviced
-
-REMARKS:
-Handler for undefined interrupts.
-****************************************************************************/
-static void X86API undefined_intr(
- int intno)
-{
- if (BE_rdw(intno * 4 + 2) == BIOS_SEG)
- printk("biosEmu: undefined interrupt %xh called!\n",intno);
- else
- X86EMU_prepareForInt(intno);
-}
-
-/****************************************************************************
-PARAMETERS:
-intno - Interrupt number being serviced
-
-REMARKS:
-This function handles the default system BIOS Int 10h (the default is stored
-in the Int 42h vector by the system BIOS at bootup). We only need to handle
-a small number of special functions used by the BIOS during POST time.
-****************************************************************************/
-static void X86API int42(
- int intno)
-{
- if (M.x86.R_AH == 0x12 && M.x86.R_BL == 0x32) {
- if (M.x86.R_AL == 0) {
- /* Enable CPU accesses to video memory */
- PM_outpb(0x3c2, PM_inpb(0x3cc) | (u8)0x02);
- return;
- }
- else if (M.x86.R_AL == 1) {
- /* Disable CPU accesses to video memory */
- PM_outpb(0x3c2, PM_inpb(0x3cc) & (u8)~0x02);
- return;
- }
-#ifdef DEBUG
- else {
- printk("biosEmu/bios.int42: unknown function AH=0x12, BL=0x32, AL=%#02x\n",M.x86.R_AL);
- }
-#endif
- }
-#ifdef DEBUG
- else {
- printk("biosEmu/bios.int42: unknown function AH=%#02x, AL=%#02x, BL=%#02x\n",M.x86.R_AH, M.x86.R_AL, M.x86.R_BL);
- }
-#endif
-}
-
-/****************************************************************************
-PARAMETERS:
-intno - Interrupt number being serviced
-
-REMARKS:
-This function handles the default system BIOS Int 10h. If the POST code
-has not yet re-vectored the Int 10h BIOS interrupt vector, we handle this
-by simply calling the int42 interrupt handler above. Very early in the
-BIOS POST process, the vector gets replaced and we simply let the real
-mode interrupt handler process the interrupt.
-****************************************************************************/
-static void X86API int10(
- int intno)
-{
- if (BE_rdw(intno * 4 + 2) == BIOS_SEG)
- int42(intno);
- else
- X86EMU_prepareForInt(intno);
-}
-
-/* Result codes returned by the PCI BIOS */
-
-#define SUCCESSFUL 0x00
-#define FUNC_NOT_SUPPORT 0x81
-#define BAD_VENDOR_ID 0x83
-#define DEVICE_NOT_FOUND 0x86
-#define BAD_REGISTER_NUMBER 0x87
-#define SET_FAILED 0x88
-#define BUFFER_TOO_SMALL 0x89
-
-/****************************************************************************
-PARAMETERS:
-intno - Interrupt number being serviced
-
-REMARKS:
-This function handles the default Int 1Ah interrupt handler for the real
-mode code, which provides support for the PCI BIOS functions. Since we only
-want to allow the real mode BIOS code *only* see the PCI config space for
-its own device, we only return information for the specific PCI config
-space that we have passed in to the init function. This solves problems
-when using the BIOS to warm boot a secondary adapter when there is an
-identical adapter before it on the bus (some BIOS'es get confused in this
-case).
-****************************************************************************/
-static void X86API int1A(
- unused)
-{
- u16 pciSlot;
-
- /* Fail if no PCI device information has been registered */
- if (!_BE_env.vgaInfo.pciInfo)
- return;
- pciSlot = (u16)(_BE_env.vgaInfo.pciInfo->slot.i >> 8);
- switch (M.x86.R_AX) {
- case 0xB101: /* PCI bios present? */
- M.x86.R_AL = 0x00; /* no config space/special cycle generation support */
- M.x86.R_EDX = 0x20494350; /* " ICP" */
- M.x86.R_BX = 0x0210; /* Version 2.10 */
- M.x86.R_CL = 0; /* Max bus number in system */
- CLEAR_FLAG(F_CF);
- break;
- case 0xB102: /* Find PCI device */
- M.x86.R_AH = DEVICE_NOT_FOUND;
- if (M.x86.R_DX == _BE_env.vgaInfo.pciInfo->VendorID &&
- M.x86.R_CX == _BE_env.vgaInfo.pciInfo->DeviceID &&
- M.x86.R_SI == 0) {
- M.x86.R_AH = SUCCESSFUL;
- M.x86.R_BX = pciSlot;
- }
- CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
- break;
- case 0xB103: /* Find PCI class code */
- M.x86.R_AH = DEVICE_NOT_FOUND;
- if (M.x86.R_CL == _BE_env.vgaInfo.pciInfo->Interface &&
- M.x86.R_CH == _BE_env.vgaInfo.pciInfo->SubClass &&
- (u8)(M.x86.R_ECX >> 16) == _BE_env.vgaInfo.pciInfo->BaseClass) {
- M.x86.R_AH = SUCCESSFUL;
- M.x86.R_BX = pciSlot;
- }
- CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
- break;
- case 0xB108: /* Read configuration byte */
- M.x86.R_AH = BAD_REGISTER_NUMBER;
- if (M.x86.R_BX == pciSlot) {
- M.x86.R_AH = SUCCESSFUL;
- M.x86.R_CL = (u8)PCI_accessReg(M.x86.R_DI,0,PCI_READ_BYTE,_BE_env.vgaInfo.pciInfo);
- }
- CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
- break;
- case 0xB109: /* Read configuration word */
- M.x86.R_AH = BAD_REGISTER_NUMBER;
- if (M.x86.R_BX == pciSlot) {
- M.x86.R_AH = SUCCESSFUL;
- M.x86.R_CX = (u16)PCI_accessReg(M.x86.R_DI,0,PCI_READ_WORD,_BE_env.vgaInfo.pciInfo);
- }
- CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
- break;
- case 0xB10A: /* Read configuration dword */
- M.x86.R_AH = BAD_REGISTER_NUMBER;
- if (M.x86.R_BX == pciSlot) {
- M.x86.R_AH = SUCCESSFUL;
- M.x86.R_ECX = (u32)PCI_accessReg(M.x86.R_DI,0,PCI_READ_DWORD,_BE_env.vgaInfo.pciInfo);
- }
- CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
- break;
- case 0xB10B: /* Write configuration byte */
- M.x86.R_AH = BAD_REGISTER_NUMBER;
- if (M.x86.R_BX == pciSlot) {
- M.x86.R_AH = SUCCESSFUL;
- PCI_accessReg(M.x86.R_DI,M.x86.R_CL,PCI_WRITE_BYTE,_BE_env.vgaInfo.pciInfo);
- }
- CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
- break;
- case 0xB10C: /* Write configuration word */
- M.x86.R_AH = BAD_REGISTER_NUMBER;
- if (M.x86.R_BX == pciSlot) {
- M.x86.R_AH = SUCCESSFUL;
- PCI_accessReg(M.x86.R_DI,M.x86.R_CX,PCI_WRITE_WORD,_BE_env.vgaInfo.pciInfo);
- }
- CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
- break;
- case 0xB10D: /* Write configuration dword */
- M.x86.R_AH = BAD_REGISTER_NUMBER;
- if (M.x86.R_BX == pciSlot) {
- M.x86.R_AH = SUCCESSFUL;
- PCI_accessReg(M.x86.R_DI,M.x86.R_ECX,PCI_WRITE_DWORD,_BE_env.vgaInfo.pciInfo);
- }
- CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
- break;
- default:
- printk("biosEmu/bios.int1a: unknown function AX=%#04x\n", M.x86.R_AX);
- }
-}
-
-/****************************************************************************
-REMARKS:
-This function initialises the BIOS emulation functions for the specific
-PCI display device. We insulate the real mode BIOS from any other devices
-on the bus, so that it will work correctly thinking that it is the only
-device present on the bus (ie: avoiding any adapters present in from of
-the device we are trying to control).
-****************************************************************************/
-void _BE_bios_init(
- u32 *intrTab)
-{
- int i;
- X86EMU_intrFuncs bios_intr_tab[256];
-
- for (i = 0; i < 256; ++i) {
- intrTab[i] = BIOS_SEG << 16;
- bios_intr_tab[i] = undefined_intr;
- }
- bios_intr_tab[0x10] = int10;
- bios_intr_tab[0x1A] = int1A;
- bios_intr_tab[0x42] = int42;
- X86EMU_setupIntrFuncs(bios_intr_tab);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/biosemu/biosemu.c b/board/MAI/bios_emulator/scitech/src/biosemu/biosemu.c
deleted file mode 100644
index 0052709cc6..0000000000
--- a/board/MAI/bios_emulator/scitech/src/biosemu/biosemu.c
+++ /dev/null
@@ -1,445 +0,0 @@
-/****************************************************************************
-*
-* BIOS emulator and interface
-* to Realmode X86 Emulator Library
-*
-* Copyright (C) 1996-1999 SciTech Software, Inc.
-*
-* ========================================================================
-*
-* Permission to use, copy, modify, distribute, and sell this software and
-* its documentation for any purpose is hereby granted without fee,
-* provided that the above copyright notice appear in all copies and that
-* both that copyright notice and this permission notice appear in
-* supporting documentation, and that the name of the authors not be used
-* in advertising or publicity pertaining to distribution of the software
-* without specific, written prior permission. The authors makes no
-* representations about the suitability of this software for any purpose.
-* It is provided "as is" without express or implied warranty.
-*
-* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-* Developer: Kendall Bennett
-*
-* Description: Module implementing the system specific functions. This
-* module is always compiled and linked in the OS depedent
-* libraries, and never in a binary portable driver.
-*
-****************************************************************************/
-
-#include "biosemui.h"
-#include <string.h>
-#include <stdlib.h>
-
-/*------------------------- Global Variables ------------------------------*/
-
-BE_sysEnv _BE_env;
-#ifdef __DRIVER__
-PM_imports _VARAPI _PM_imports;
-#endif
-static X86EMU_memFuncs _BE_mem = {
- BE_rdb,
- BE_rdw,
- BE_rdl,
- BE_wrb,
- BE_wrw,
- BE_wrl,
- };
-#ifdef DEBUG
-static X86EMU_pioFuncs _BE_pio = {
- BE_inb,
- BE_inw,
- BE_inl,
- BE_outb,
- BE_outw,
- BE_outl,
- };
-#else
-static X86EMU_pioFuncs _BE_pio = {
- (void*)PM_inpb,
- (void*)PM_inpw,
- (void*)PM_inpd,
- (void*)PM_outpb,
- (void*)PM_outpw,
- (void*)PM_outpd,
- };
-#endif
-
-/*-------------------------- Implementation -------------------------------*/
-
-#define OFF(addr) (u16)(((addr) >> 0) & 0xffff)
-#define SEG(addr) (u16)(((addr) >> 4) & 0xf000)
-
-/****************************************************************************
-PARAMETERS:
-debugFlags - Flags to enable debugging options (debug builds only)
-memSize - Amount of memory to allocate for real mode machine
-info - Pointer to default VGA device information
-
-REMARKS:
-This functions initialises the BElib, and uses the passed in
-BIOS image as the BIOS that is used and emulated at 0xC0000.
-****************************************************************************/
-ibool PMAPI BE_init(
- u32 debugFlags,
- int memSize,
- BE_VGAInfo *info)
-{
-#ifndef __DRIVER__
- PM_init();
-#endif
- memset(&M,0,sizeof(M));
- if (memSize < 20480)
- PM_fatalError("Emulator requires at least 20Kb of memory!\n");
- if ((M.mem_base = (unsigned long)malloc(memSize)) == NULL)
- PM_fatalError("Out of memory!");
- M.mem_size = memSize;
- _BE_env.busmem_base = (ulong)PM_mapPhysicalAddr(0xA0000,0x5FFFF,true);
- M.x86.debug = debugFlags;
- _BE_bios_init((u32*)info->LowMem);
- X86EMU_setupMemFuncs(&_BE_mem);
- X86EMU_setupPioFuncs(&_BE_pio);
- BE_setVGA(info);
- return true;
-}
-
-/****************************************************************************
-PARAMETERS:
-debugFlags - Flags to enable debugging options (debug builds only)
-
-REMARKS:
-This function allows the application to enable logging and debug flags
-on a function call basis, so we can specifically enable logging only
-for specific functions that are causing problems in debug mode.
-****************************************************************************/
-void PMAPI BE_setDebugFlags(
- u32 debugFlags)
-{
- M.x86.debug = debugFlags;
-}
-
-/****************************************************************************
-PARAMETERS:
-info - Pointer to VGA device information to make current
-
-REMARKS:
-This function sets the VGA BIOS functions in the emulator to point to the
-specific VGA BIOS in use. This includes swapping the BIOS interrupt
-vectors, BIOS image and BIOS data area to the new BIOS. This allows the
-real mode BIOS to be swapped without resetting the entire emulator.
-****************************************************************************/
-void PMAPI BE_setVGA(
- BE_VGAInfo *info)
-{
- _BE_env.vgaInfo.pciInfo = info->pciInfo;
- _BE_env.vgaInfo.BIOSImage = info->BIOSImage;
- if (info->BIOSImage) {
- _BE_env.biosmem_base = (ulong)info->BIOSImage;
- _BE_env.biosmem_limit = 0xC0000 + info->BIOSImageLen-1;
- }
- else {
- _BE_env.biosmem_base = _BE_env.busmem_base + 0x20000;
- _BE_env.biosmem_limit = 0xC7FFF;
- }
- if (*((u32*)info->LowMem) == 0)
- _BE_bios_init((u32*)info->LowMem);
- memcpy((u8*)M.mem_base,info->LowMem,sizeof(info->LowMem));
-}
-
-/****************************************************************************
-PARAMETERS:
-info - Pointer to VGA device information to retrieve current
-
-REMARKS:
-This function returns the VGA BIOS functions currently active in the
-emulator, so they can be restored at a later date.
-****************************************************************************/
-void PMAPI BE_getVGA(
- BE_VGAInfo *info)
-{
- info->pciInfo = _BE_env.vgaInfo.pciInfo;
- info->BIOSImage = _BE_env.vgaInfo.BIOSImage;
- memcpy(info->LowMem,(u8*)M.mem_base,sizeof(info->LowMem));
-}
-
-/****************************************************************************
-PARAMETERS:
-r_seg - Segment for pointer to convert
-r_off - Offset for pointer to convert
-
-REMARKS:
-This function maps a real mode pointer in the emulator memory to a protected
-mode pointer that can be used to directly access the memory.
-
-NOTE: The memory is *always* in little endian format, son on non-x86
- systems you will need to do endian translations to access this
- memory.
-****************************************************************************/
-void * PMAPI BE_mapRealPointer(
- uint r_seg,
- uint r_off)
-{
- u32 addr = ((u32)r_seg << 4) + r_off;
-
- if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) {
- return (void*)(_BE_env.biosmem_base + addr - 0xC0000);
- }
- else if (addr >= 0xA0000 && addr <= 0xFFFFF) {
- return (void*)(_BE_env.busmem_base + addr - 0xA0000);
- }
- return (void*)(M.mem_base + addr);
-}
-
-/****************************************************************************
-PARAMETERS:
-len - Return the length of the VESA buffer
-rseg - Place to store VESA buffer segment
-roff - Place to store VESA buffer offset
-
-REMARKS:
-This function returns the address of the VESA transfer buffer in real
-mode emulator memory. The VESA transfer buffer is always 1024 bytes long,
-and located at 15Kb into the start of the real mode memory (16Kb is where
-we put the real mode code we execute for issuing interrupts).
-
-NOTE: The memory is *always* in little endian format, son on non-x86
- systems you will need to do endian translations to access this
- memory.
-****************************************************************************/
-void * PMAPI BE_getVESABuf(
- uint *len,
- uint *rseg,
- uint *roff)
-{
- *len = 1024;
- *rseg = SEG(0x03C00);
- *roff = OFF(0x03C00);
- return (void*)(M.mem_base + ((u32)*rseg << 4) + *roff);
-}
-
-/****************************************************************************
-REMARKS:
-Cleans up and exits the emulator.
-****************************************************************************/
-void PMAPI BE_exit(void)
-{
- free((void*)M.mem_base);
- PM_freePhysicalAddr((void*)_BE_env.busmem_base,0x5FFFF);
-}
-
-/****************************************************************************
-PARAMETERS:
-seg - Segment of code to call
-off - Offset of code to call
-regs - Real mode registers to load
-sregs - Real mode segment registers to load
-
-REMARKS:
-This functions calls a real mode far function at the specified address,
-and loads all the x86 registers from the passed in registers structure.
-On exit the registers returned from the call are returned in the same
-structures.
-****************************************************************************/
-void PMAPI BE_callRealMode(
- uint seg,
- uint off,
- RMREGS *regs,
- RMSREGS *sregs)
-{
- M.x86.R_EAX = regs->e.eax;
- M.x86.R_EBX = regs->e.ebx;
- M.x86.R_ECX = regs->e.ecx;
- M.x86.R_EDX = regs->e.edx;
- M.x86.R_ESI = regs->e.esi;
- M.x86.R_EDI = regs->e.edi;
- M.x86.R_DS = sregs->ds;
- M.x86.R_ES = sregs->es;
- M.x86.R_FS = sregs->fs;
- M.x86.R_GS = sregs->gs;
- M.x86.R_CS = (u16)seg;
- M.x86.R_IP = (u16)off;
- M.x86.R_SS = SEG(M.mem_size - 1);
- M.x86.R_SP = OFF(M.mem_size - 1);
- X86EMU_exec();
- regs->e.cflag = M.x86.R_EFLG & F_CF;
- regs->e.eax = M.x86.R_EAX;
- regs->e.ebx = M.x86.R_EBX;
- regs->e.ecx = M.x86.R_ECX;
- regs->e.edx = M.x86.R_EDX;
- regs->e.esi = M.x86.R_ESI;
- regs->e.edi = M.x86.R_EDI;
- sregs->ds = M.x86.R_DS;
- sregs->es = M.x86.R_ES;
- sregs->fs = M.x86.R_FS;
- sregs->gs = M.x86.R_GS;
-}
-
-/****************************************************************************
-PARAMETERS:
-intno - Interrupt number to execute
-in - Real mode registers to load
-out - Place to store resulting real mode registers
-
-REMARKS:
-This functions calls a real mode interrupt function at the specified address,
-and loads all the x86 registers from the passed in registers structure.
-On exit the registers returned from the call are returned in out stucture.
-****************************************************************************/
-int PMAPI BE_int86(
- int intno,
- RMREGS *in,
- RMREGS *out)
-{
- M.x86.R_EAX = in->e.eax;
- M.x86.R_EBX = in->e.ebx;
- M.x86.R_ECX = in->e.ecx;
- M.x86.R_EDX = in->e.edx;
- M.x86.R_ESI = in->e.esi;
- M.x86.R_EDI = in->e.edi;
- ((u8*)M.mem_base)[0x4000] = 0xCD;
- ((u8*)M.mem_base)[0x4001] = (u8)intno;
- ((u8*)M.mem_base)[0x4002] = 0xC3;
- M.x86.R_CS = SEG(0x04000);
- M.x86.R_IP = OFF(0x04000);
- M.x86.R_SS = SEG(M.mem_size - 1);
- M.x86.R_SP = OFF(M.mem_size - 1);
- X86EMU_exec();
- out->e.cflag = M.x86.R_EFLG & F_CF;
- out->e.eax = M.x86.R_EAX;
- out->e.ebx = M.x86.R_EBX;
- out->e.ecx = M.x86.R_ECX;
- out->e.edx = M.x86.R_EDX;
- out->e.esi = M.x86.R_ESI;
- out->e.edi = M.x86.R_EDI;
- return out->x.ax;
-}
-
-/****************************************************************************
-PARAMETERS:
-intno - Interrupt number to execute
-in - Real mode registers to load
-out - Place to store resulting real mode registers
-sregs - Real mode segment registers to load
-
-REMARKS:
-This functions calls a real mode interrupt function at the specified address,
-and loads all the x86 registers from the passed in registers structure.
-On exit the registers returned from the call are returned in out stucture.
-****************************************************************************/
-int PMAPI BE_int86x(
- int intno,
- RMREGS *in,
- RMREGS *out,
- RMSREGS *sregs)
-{
- M.x86.R_EAX = in->e.eax;
- M.x86.R_EBX = in->e.ebx;
- M.x86.R_ECX = in->e.ecx;
- M.x86.R_EDX = in->e.edx;
- M.x86.R_ESI = in->e.esi;
- M.x86.R_EDI = in->e.edi;
- M.x86.R_DS = sregs->ds;
- M.x86.R_ES = sregs->es;
- M.x86.R_FS = sregs->fs;
- M.x86.R_GS = sregs->gs;
- ((u8*)M.mem_base)[0x4000] = 0xCD;
- ((u8*)M.mem_base)[0x4001] = (u8)intno;
- ((u8*)M.mem_base)[0x4002] = 0xC3;
- M.x86.R_CS = SEG(0x04000);
- M.x86.R_IP = OFF(0x04000);
- M.x86.R_SS = SEG(M.mem_size - 1);
- M.x86.R_SP = OFF(M.mem_size - 1);
- X86EMU_exec();
- out->e.cflag = M.x86.R_EFLG & F_CF;
- out->e.eax = M.x86.R_EAX;
- out->e.ebx = M.x86.R_EBX;
- out->e.ecx = M.x86.R_ECX;
- out->e.edx = M.x86.R_EDX;
- out->e.esi = M.x86.R_ESI;
- out->e.edi = M.x86.R_EDI;
- sregs->ds = M.x86.R_DS;
- sregs->es = M.x86.R_ES;
- sregs->fs = M.x86.R_FS;
- sregs->gs = M.x86.R_GS;
- return out->x.ax;
-}
-
-#ifdef __DRIVER__
-
-/****************************************************************************
-REMARKS:
-Empty log function for binary portable DLL. The BPD is compiled without
-debug information, so very little is logged anyway so it is simpler this
-way.
-****************************************************************************/
-void printk(const char *msg, ...)
-{
-}
-
-/****************************************************************************
-REMARKS:
-Fatal error handler called when a non-imported function is called by the
-driver. We leave this to a runtime error so that older applications and
-shell drivers will work with newer bpd drivers provided no newer functions
-are required by the driver itself. If they are, the application or shell
-driver needs to be recompiled.
-****************************************************************************/
-static void _PM_fatalErrorHandler(void)
-{
- PM_fatalError("Unsupported PM_imports import function called! Please re-compile!\n");
-}
-
-/****************************************************************************
-PARAMETERS:
-beImp - BE library imports
-beImp - Generic emulator imports
-
-RETURNS:
-Pointer to exported function list
-
-REMARKS:
-This function initialises the BIOS emulator library and returns the list of
-loader library exported functions.
-{secret}
-****************************************************************************/
-BE_exports * _CEXPORT BE_initLibrary(
- PM_imports *pmImp)
-{
- static BE_exports _BE_exports = {
- sizeof(BE_exports),
- BE_init,
- BE_setVGA,
- BE_getVGA,
- BE_mapRealPointer,
- BE_getVESABuf,
- BE_callRealMode,
- BE_int86,
- BE_int86x,
- NULL,
- BE_exit,
- };
- int i,max;
- ulong *p;
-
- /* Initialize all default imports to point to fatal error handler */
- /* for upwards compatibility. */
- max = sizeof(_PM_imports)/sizeof(BE_initLibrary_t);
- for (i = 0,p = (ulong*)&_PM_imports; i < max; i++)
- *p++ = (ulong)_PM_fatalErrorHandler;
-
- /* Now copy all our imported functions */
- memcpy(&_PM_imports,pmImp,MIN(sizeof(_PM_imports),pmImp->dwSize));
- return &_BE_exports;
-}
-
-#endif /* __DRIVER__ */
diff --git a/board/MAI/bios_emulator/scitech/src/biosemu/biosemui.h b/board/MAI/bios_emulator/scitech/src/biosemu/biosemui.h
deleted file mode 100644
index 23edebc95c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/biosemu/biosemui.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/****************************************************************************
-*
-* BIOS emulator and interface
-* to Realmode X86 Emulator Library
-*
-* Copyright (C) 1996-1999 SciTech Software, Inc.
-*
-* ========================================================================
-*
-* Permission to use, copy, modify, distribute, and sell this software and
-* its documentation for any purpose is hereby granted without fee,
-* provided that the above copyright notice appear in all copies and that
-* both that copyright notice and this permission notice appear in
-* supporting documentation, and that the name of the authors not be used
-* in advertising or publicity pertaining to distribution of the software
-* without specific, written prior permission. The authors makes no
-* representations about the suitability of this software for any purpose.
-* It is provided "as is" without express or implied warranty.
-*
-* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-* Developer: Kendall Bennett
-*
-* Description: Internal header file for the BIOS emulator library.
-*
-****************************************************************************/
-
-#ifndef __BIOSEMUI_H
-#define __BIOSEMUI_H
-
-#include <biosemu.h>
-
-/*---------------------- Macros and type definitions ----------------------*/
-
-#ifdef DEBUG
-#define DB(x) x
-#else
-#define DB(x)
-#endif
-
-#define BIOS_SEG 0xfff0
-
-#define M _X86EMU_env
-
-/*-------------------------- Function Prototypes --------------------------*/
-
-/* bios.c */
-
-void _BE_bios_init(u32 *intrTab);
-void _BE_setup_funcs(void);
-
-/* besys.c */
-
-u8 X86API BE_rdb(u32 addr);
-u16 X86API BE_rdw(u32 addr);
-u32 X86API BE_rdl(u32 addr);
-void X86API BE_wrb(u32 addr,u8 val);
-void X86API BE_wrw(u32 addr,u16 val);
-void X86API BE_wrl(u32 addr,u32 val);
-#ifdef DEBUG
-u8 X86API BE_inb(int port);
-u16 X86API BE_inw(int port);
-u32 X86API BE_inl(int port);
-void X86API BE_outb(int port, u8 val);
-void X86API BE_outw(int port, u16 val);
-void X86API BE_outl(int port, u32 val);
-#endif
-
-#endif /* __BIOSEMUI_H */
diff --git a/board/MAI/bios_emulator/scitech/src/biosemu/makefile b/board/MAI/bios_emulator/scitech/src/biosemu/makefile
deleted file mode 100644
index 80730b2997..0000000000
--- a/board/MAI/bios_emulator/scitech/src/biosemu/makefile
+++ /dev/null
@@ -1,99 +0,0 @@
-#############################################################################
-#
-# BIOS emulator and interface
-# to Realmode X86 Emulator Library
-#
-# Copyright (C) 1996-1999 SciTech Software, Inc.
-#
-# ========================================================================
-#
-# Permission to use, copy, modify, distribute, and sell this software and
-# its documentation for any purpose is hereby granted without fee,
-# provided that the above copyright notice appear in all copies and that
-# both that copyright notice and this permission notice appear in
-# supporting documentation, and that the name of the authors not be used
-# in advertising or publicity pertaining to distribution of the software
-# without specific, written prior permission. The authors makes no
-# representations about the suitability of this software for any purpose.
-# It is provided "as is" without express or implied warranty.
-#
-# THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-# INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-# EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-# USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-# OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
-#
-# ========================================================================
-#
-# Descripton: Generic makefile for the x86emu library. Requires
-# the SciTech Software makefile definitions package to be
-# installed, which uses the DMAKE make program.
-#
-#############################################################################
-
-.IMPORT .IGNORE: DEBUG
-
-#----------------------------------------------------------------------------
-# Define the lists of object files
-#----------------------------------------------------------------------------
-
-DLL_OBJS = dllstart$O _pm_imp$O
-BIOS_OBJS = biosemu$O bios$O besys$O
-X86_OBJS = sys$O decode$O ops$O ops2$O prim_ops$O fpu$O debug$O
-CFLAGS += -DSCITECH -I$(SCITECH)\src\x86emu
-
-.IF $(BUILD_DLL)
-
-CFLAGS += -I$(PRIVATE)\include\drvlib -I$(SCITECH)\include\drvlib -D__DRIVER__
-ASFLAGS += -d__DRIVER__
-EXELIBS = drvlib$L
-
-.ELSE
-
-.IF $(DEBUG)
-CFLAGS += -DDEBUG
-.ENDIF
-OBJECTS = $(BIOS_OBJS) $(X86_OBJS)
-LIBCLEAN = *.dll *.lib *.a
-LIBFILE = $(LP)biosemu$L
-
-.ENDIF
-
-#----------------------------------------------------------------------------
-# Sample test programs
-#----------------------------------------------------------------------------
-
-all: $(LIBFILE) warmboot$E
-
-warmboot$E: warmboot$O $(LIBFILE)
-
-#----------------------------------------------------------------------------
-# Target to build the Binary Portable DLL target
-#----------------------------------------------------------------------------
-
-biosemu.dll: $(DLL_OBJS) $(BIOS_OBJS) $(X86_OBJS)
-
-#----------------------------------------------------------------------------
-# Target to build all Intel binary drivers
-#----------------------------------------------------------------------------
-
-.PHONY mkdrv:
- @build wc11-w32 biosemu.dll -u BUILD_DLL=1 NO_RUNTIME=1 OPT=1
- @$(CP) biosemu.dll $(PRIVATE)\nucleus\graphics\biosemu.bpd
- @dmake cleanexe
-
-.PHONY db:
- @build wc11-w32 biosemu.dll BUILD_DLL=1 NO_RUNTIME=1 OPT=1
- @$(CP) biosemu.dll $(PRIVATE)\nucleus\graphics\biosemu.bpd
-
-#----------------------------------------------------------------------------
-# Define the list of object files to create dependency information for
-#----------------------------------------------------------------------------
-
-DEPEND_OBJ = warmboot$O $(BIOS_OBJS) $(X86_OBJS) $(DLL_OBJS)
-DEPEND_SRC = $(SCITECH)/src/x86emu;$(PRIVATE)/src/common
-.SOURCE: $(SCITECH)/src/x86emu $(PRIVATE)/src/common
-
-.INCLUDE: "$(SCITECH)/makedefs/common.mk"
diff --git a/board/MAI/bios_emulator/scitech/src/biosemu/makefile.cross b/board/MAI/bios_emulator/scitech/src/biosemu/makefile.cross
deleted file mode 100644
index 9141003076..0000000000
--- a/board/MAI/bios_emulator/scitech/src/biosemu/makefile.cross
+++ /dev/null
@@ -1,10 +0,0 @@
-CC = ppc-elf32-gcc
-AR = ppc-elf32-ar
-
-CFLAGS = -D__DRIVER__ -I../../include -DDEBUG -I.
-
-BIOS_OBJS = biosemu.o bios.o besys.o
-X86_OBJS = sys.o decode.o ops.o prim_ops.o fpu.o debug.o
-
-libbios.a: $(BIOS_OBJS)
- $(AR) rcs libbios.a $(BIOS_OBJS) \ No newline at end of file
diff --git a/board/MAI/bios_emulator/scitech/src/biosemu/warmboot.c b/board/MAI/bios_emulator/scitech/src/biosemu/warmboot.c
deleted file mode 100644
index 98d5fb8a62..0000000000
--- a/board/MAI/bios_emulator/scitech/src/biosemu/warmboot.c
+++ /dev/null
@@ -1,569 +0,0 @@
-/****************************************************************************
-*
-* BIOS emulator and interface
-* to Realmode X86 Emulator Library
-*
-* Copyright (C) 1996-1999 SciTech Software, Inc.
-*
-* ========================================================================
-*
-* Permission to use, copy, modify, distribute, and sell this software and
-* its documentation for any purpose is hereby granted without fee,
-* provided that the above copyright notice appear in all copies and that
-* both that copyright notice and this permission notice appear in
-* supporting documentation, and that the name of the authors not be used
-* in advertising or publicity pertaining to distribution of the software
-* without specific, written prior permission. The authors makes no
-* representations about the suitability of this software for any purpose.
-* It is provided "as is" without express or implied warranty.
-*
-* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-* Developer: Kendall Bennett
-*
-* Description: Module to implement warm booting of all PCI/AGP controllers
-* on the bus. We use the x86 real mode emulator to run the
-* BIOS on the primary and secondary controllers to bring
-* the cards up.
-*
-****************************************************************************/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <stdarg.h>
-#include "biosemu.h"
-#ifndef _MAX_PATH
-#define _MAX_PATH 256
-#endif
-
-/*------------------------- Global Variables ------------------------------*/
-
-static PCIDeviceInfo PCI[MAX_PCI_DEVICES];
-static int NumPCI = -1;
-static int BridgeIndex[MAX_PCI_DEVICES] = {0};
-static int NumBridges;
-static PCIBridgeInfo *AGPBridge = NULL;
-static int DeviceIndex[MAX_PCI_DEVICES] = {0};
-static int NumDevices;
-static u32 debugFlags = 0;
-static BE_VGAInfo VGAInfo[MAX_PCI_DEVICES] = {{0}};
-static ibool useV86 = false;
-static ibool forcePost = false;
-
-/* Length of the BIOS image */
-
-#define MAX_BIOSLEN (64 * 1024L)
-#define FINAL_BIOSLEN (32 * 1024L)
-
-/* Macro to determine if the VGA is enabled and responding */
-
-#define VGA_NOT_ACTIVE() (forcePost || (PM_inpb(0x3CC) == 0xFF) || ((PM_inpb(0x3CC) & 0x2) == 0))
-
-#define ENABLE_DEVICE(device) \
- PCI_writePCIRegB(0x4,PCI[DeviceIndex[device]].Command | 0x7,device)
-
-#define DISABLE_DEVICE(device) \
- PCI_writePCIRegB(0x4,0,device)
-
-/* Macros to enable and disable AGP VGA resources */
-
-#define ENABLE_AGP_VGA() \
- PCI_accessReg(0x3E,AGPBridge->BridgeControl | 0x8,PCI_WRITE_WORD,(PCIDeviceInfo*)AGPBridge)
-
-#define DISABLE_AGP_VGA() \
- PCI_accessReg(0x3E,AGPBridge->BridgeControl & ~0x8,PCI_WRITE_WORD,(PCIDeviceInfo*)AGPBridge)
-
-#define RESTORE_AGP_VGA() \
- PCI_accessReg(0x3E,AGPBridge->BridgeControl,PCI_WRITE_WORD,(PCIDeviceInfo*)AGPBridge)
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-RETURNS:
-The address to use to map the secondary BIOS (PCI/AGP devices)
-
-REMARKS:
-Searches all the PCI base address registers for the device looking for a
-memory mapping that is large enough to hold our ROM BIOS. We usually end up
-finding the framebuffer mapping (usually BAR 0x10), and we use this mapping
-to map the BIOS for the device into. We use a mapping that is already
-assigned to the device to ensure the memory range will be passed through
-by any PCI->PCI or AGP->PCI bridge that may be present.
-
-NOTE: Usually this function is only used for AGP devices, but it may be
- used for PCI devices that have already been POST'ed and the BIOS
- ROM base address has been zero'ed out.
-****************************************************************************/
-static ulong PCI_findBIOSAddr(
- int device)
-{
- ulong base,size;
- int bar;
-
- for (bar = 0x10; bar <= 0x14; bar++) {
- base = PCI_readPCIRegL(bar,device) & ~0xFF;
- if (!(base & 0x1)) {
- PCI_writePCIRegL(bar,0xFFFFFFFF,device);
- size = PCI_readPCIRegL(bar,device) & ~0xFF;
- size = ~size+1;
- PCI_writePCIRegL(bar,0,device);
- if (size >= MAX_BIOSLEN)
- return base;
- }
- }
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Re-writes the PCI base address registers for the secondary PCI controller
-with the values from our initial PCI bus enumeration. This fixes up the
-values after we have POST'ed the secondary display controller BIOS, which
-may have incorrectly re-programmed the base registers the same as the
-primary display controller (the case for identical S3 cards).
-****************************************************************************/
-static void _PCI_fixupSecondaryBARs(void)
-{
- int i;
-
- for (i = 0; i < NumDevices; i++) {
- PCI_writePCIRegL(0x10,PCI[DeviceIndex[i]].BaseAddress10,i);
- PCI_writePCIRegL(0x14,PCI[DeviceIndex[i]].BaseAddress14,i);
- PCI_writePCIRegL(0x18,PCI[DeviceIndex[i]].BaseAddress18,i);
- PCI_writePCIRegL(0x1C,PCI[DeviceIndex[i]].BaseAddress1C,i);
- PCI_writePCIRegL(0x20,PCI[DeviceIndex[i]].BaseAddress20,i);
- PCI_writePCIRegL(0x24,PCI[DeviceIndex[i]].BaseAddress24,i);
- }
-}
-
-/****************************************************************************
-RETURNS:
-True if successfully initialised, false if not.
-
-REMARKS:
-This function executes the BIOS POST code on the controller. We assume that
-at this stage the controller has its I/O and memory space enabled and
-that all other controllers are in a disabled state.
-****************************************************************************/
-static void PCI_doBIOSPOST(
- int device,
- ulong BIOSPhysAddr,
- void *mappedBIOS,
- ulong BIOSLen)
-{
- RMREGS regs;
- RMSREGS sregs;
-
- /* Determine the value to store in AX for BIOS POST */
- regs.x.ax = (u16)(PCI[DeviceIndex[device]].slot.i >> 8);
- if (useV86) {
- /* Post the BIOS using the PM functions (ie: v86 mode on Linux) */
- if (!PM_doBIOSPOST(regs.x.ax,BIOSPhysAddr,mappedBIOS,BIOSLen)) {
- /* If the PM function fails, this probably means are we are on */
- /* DOS and can't re-map the real mode 0xC0000 region. In thise */
- /* case if the device is the primary, we can use the real */
- /* BIOS at 0xC0000 directly. */
- if (device == 0)
- PM_doBIOSPOST(regs.x.ax,0xC0000,mappedBIOS,BIOSLen);
- }
- }
- else {
- /* Setup the X86 emulator for the VGA BIOS */
- BE_setVGA(&VGAInfo[device]);
-
- /* Execute the BIOS POST code */
- BE_callRealMode(0xC000,0x0003,&regs,&sregs);
-
- /* Cleanup and exit */
- BE_getVGA(&VGAInfo[device]);
- }
-}
-
-/****************************************************************************
-RETURNS:
-True if successfully initialised, false if not.
-
-REMARKS:
-Loads and POST's the secondary controllers BIOS, directly from the BIOS
-image we can extract over the PCI bus.
-****************************************************************************/
-static ibool PCI_postControllers(void)
-{
- int device;
- ulong BIOSImageLen,mappedBIOSPhys;
- uchar *mappedBIOS,*copyOfBIOS;
- char filename[_MAX_PATH];
- FILE *f;
-
- /* Disable the primary display controller and AGP VGA pass-through */
- DISABLE_DEVICE(0);
- if (AGPBridge)
- DISABLE_AGP_VGA();
-
- /* Now POST all the secondary controllers */
- for (device = 0; device < NumDevices; device++) {
- /* Skip the device if it is not enabled (probably an ISA device) */
- if (DeviceIndex[device] == -1)
- continue;
-
- /* Enable secondary display controller. If the secondary controller */
- /* is on the AGP bus, then enable VGA resources for the AGP device. */
- ENABLE_DEVICE(device);
- if (AGPBridge && AGPBridge->SecondayBusNumber == PCI[DeviceIndex[device]].slot.p.Bus)
- ENABLE_AGP_VGA();
-
- /* Check if the controller has already been POST'ed */
- if (VGA_NOT_ACTIVE()) {
- /* Find a viable place to map the secondary PCI BIOS image and map it */
- printk("Device %d not enabled, so attempting warm boot it\n", device);
-
- /* For AGP devices (and PCI devices that do have the ROM base */
- /* address zero'ed out) we have to map the BIOS to a location */
- /* that is passed by the AGP bridge to the bus. Some AGP devices */
- /* have the ROM base address already set up for us, and some */
- /* do not (we map to one of the existing BAR locations in */
- /* this case). */
- mappedBIOS = NULL;
- if (PCI[DeviceIndex[device]].ROMBaseAddress != 0)
- mappedBIOSPhys = PCI[DeviceIndex[device]].ROMBaseAddress & ~0xF;
- else
- mappedBIOSPhys = PCI_findBIOSAddr(device);
- printk("Mapping BIOS image to 0x%08X\n", mappedBIOSPhys);
- mappedBIOS = PM_mapPhysicalAddr(mappedBIOSPhys,MAX_BIOSLEN-1,false);
- PCI_writePCIRegL(0x30,mappedBIOSPhys | 0x1,device);
- BIOSImageLen = mappedBIOS[2] * 512;
- if ((copyOfBIOS = malloc(BIOSImageLen)) == NULL)
- return false;
- memcpy(copyOfBIOS,mappedBIOS,BIOSImageLen);
- PM_freePhysicalAddr(mappedBIOS,MAX_BIOSLEN-1);
-
- /* Allocate memory to store copy of BIOS from secondary controllers */
- VGAInfo[device].pciInfo = &PCI[DeviceIndex[device]];
- VGAInfo[device].BIOSImage = copyOfBIOS;
- VGAInfo[device].BIOSImageLen = BIOSImageLen;
-
- /* Restore device mappings */
- PCI_writePCIRegL(0x30,PCI[DeviceIndex[device]].ROMBaseAddress,device);
- PCI_writePCIRegL(0x10,PCI[DeviceIndex[device]].BaseAddress10,device);
- PCI_writePCIRegL(0x14,PCI[DeviceIndex[device]].BaseAddress14,device);
-
- /* Now execute the BIOS POST for the device */
- if (copyOfBIOS[0] == 0x55 && copyOfBIOS[1] == 0xAA) {
- printk("Executing BIOS POST for controller.\n");
- PCI_doBIOSPOST(device,mappedBIOSPhys,copyOfBIOS,BIOSImageLen);
- }
-
- /* Reset the size of the BIOS image to the final size */
- VGAInfo[device].BIOSImageLen = FINAL_BIOSLEN;
-
- /* Save the BIOS and interrupt vector information to disk */
- sprintf(filename,"%s/bios.%02d",PM_getNucleusConfigPath(),device);
- if ((f = fopen(filename,"wb")) != NULL) {
- fwrite(copyOfBIOS,1,FINAL_BIOSLEN,f);
- fwrite(VGAInfo[device].LowMem,1,sizeof(VGAInfo[device].LowMem),f);
- fclose(f);
- }
- }
- else {
- /* Allocate memory to store copy of BIOS from secondary controllers */
- if ((copyOfBIOS = malloc(FINAL_BIOSLEN)) == NULL)
- return false;
- VGAInfo[device].pciInfo = &PCI[DeviceIndex[device]];
- VGAInfo[device].BIOSImage = copyOfBIOS;
- VGAInfo[device].BIOSImageLen = FINAL_BIOSLEN;
-
- /* Load the BIOS and interrupt vector information from disk */
- sprintf(filename,"%s/bios.%02d",PM_getNucleusConfigPath(),device);
- if ((f = fopen(filename,"rb")) != NULL) {
- fread(copyOfBIOS,1,FINAL_BIOSLEN,f);
- fread(VGAInfo[device].LowMem,1,sizeof(VGAInfo[device].LowMem),f);
- fclose(f);
- }
- }
-
- /* Fix up all the secondary PCI base address registers */
- /* (restores them all from the values we read previously) */
- _PCI_fixupSecondaryBARs();
-
- /* Disable the secondary controller and AGP VGA pass-through */
- DISABLE_DEVICE(device);
- if (AGPBridge)
- DISABLE_AGP_VGA();
- }
-
- /* Reenable primary display controller and reset AGP bridge control */
- if (AGPBridge)
- RESTORE_AGP_VGA();
- ENABLE_DEVICE(0);
-
- /* Free physical BIOS image mapping */
- PM_freePhysicalAddr(mappedBIOS,MAX_BIOSLEN-1);
-
- /* Restore the X86 emulator BIOS info to primary controller */
- if (!useV86)
- BE_setVGA(&VGAInfo[0]);
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-Enumerates the PCI bus and dumps the PCI configuration information to the
-log file.
-****************************************************************************/
-static void EnumeratePCI(void)
-{
- int i,index;
- PCIBridgeInfo *info;
-
- printk("Displaying enumeration of PCI bus (%d devices, %d display devices)\n",
- NumPCI, NumDevices);
- for (index = 0; index < NumDevices; index++)
- printk(" Display device %d is PCI device %d\n",index,DeviceIndex[index]);
- printk("\n");
- printk("Bus Slot Fnc DeviceID SubSystem Rev Class IRQ Int Cmd\n");
- for (i = 0; i < NumPCI; i++) {
- printk("%2d %2d %2d %04X:%04X %04X:%04X %02X %02X:%02X %02X %02X %04X ",
- PCI[i].slot.p.Bus,
- PCI[i].slot.p.Device,
- PCI[i].slot.p.Function,
- PCI[i].VendorID,
- PCI[i].DeviceID,
- PCI[i].SubSystemVendorID,
- PCI[i].SubSystemID,
- PCI[i].RevID,
- PCI[i].BaseClass,
- PCI[i].SubClass,
- PCI[i].InterruptLine,
- PCI[i].InterruptPin,
- PCI[i].Command);
- for (index = 0; index < NumDevices; index++) {
- if (DeviceIndex[index] == i)
- break;
- }
- if (index < NumDevices)
- printk("<- %d\n", index);
- else
- printk("\n");
- }
- printk("\n");
- printk("DeviceID Stat Ifc Cch Lat Hdr BIST\n");
- for (i = 0; i < NumPCI; i++) {
- printk("%04X:%04X %04X %02X %02X %02X %02X %02X ",
- PCI[i].VendorID,
- PCI[i].DeviceID,
- PCI[i].Status,
- PCI[i].Interface,
- PCI[i].CacheLineSize,
- PCI[i].LatencyTimer,
- PCI[i].HeaderType,
- PCI[i].BIST);
- for (index = 0; index < NumDevices; index++) {
- if (DeviceIndex[index] == i)
- break;
- }
- if (index < NumDevices)
- printk("<- %d\n", index);
- else
- printk("\n");
- }
- printk("\n");
- printk("DeviceID Base10h Base14h Base18h Base1Ch Base20h Base24h ROMBase\n");
- for (i = 0; i < NumPCI; i++) {
- printk("%04X:%04X %08X %08X %08X %08X %08X %08X %08X ",
- PCI[i].VendorID,
- PCI[i].DeviceID,
- PCI[i].BaseAddress10,
- PCI[i].BaseAddress14,
- PCI[i].BaseAddress18,
- PCI[i].BaseAddress1C,
- PCI[i].BaseAddress20,
- PCI[i].BaseAddress24,
- PCI[i].ROMBaseAddress);
- for (index = 0; index < NumDevices; index++) {
- if (DeviceIndex[index] == i)
- break;
- }
- if (index < NumDevices)
- printk("<- %d\n", index);
- else
- printk("\n");
- }
- printk("\n");
- printk("DeviceID BAR10Len BAR14Len BAR18Len BAR1CLen BAR20Len BAR24Len ROMLen\n");
- for (i = 0; i < NumPCI; i++) {
- printk("%04X:%04X %08X %08X %08X %08X %08X %08X %08X ",
- PCI[i].VendorID,
- PCI[i].DeviceID,
- PCI[i].BaseAddress10Len,
- PCI[i].BaseAddress14Len,
- PCI[i].BaseAddress18Len,
- PCI[i].BaseAddress1CLen,
- PCI[i].BaseAddress20Len,
- PCI[i].BaseAddress24Len,
- PCI[i].ROMBaseAddressLen);
- for (index = 0; index < NumDevices; index++) {
- if (DeviceIndex[index] == i)
- break;
- }
- if (index < NumDevices)
- printk("<- %d\n", index);
- else
- printk("\n");
- }
- printk("\n");
- printk("Displaying enumeration of %d bridge devices\n",NumBridges);
- printk("\n");
- printk("DeviceID P# S# B# IOB IOL MemBase MemLimit PreBase PreLimit Ctrl\n");
- for (i = 0; i < NumBridges; i++) {
- info = (PCIBridgeInfo*)&PCI[BridgeIndex[i]];
- printk("%04X:%04X %02X %02X %02X %04X %04X %08X %08X %08X %08X %04X\n",
- info->VendorID,
- info->DeviceID,
- info->PrimaryBusNumber,
- info->SecondayBusNumber,
- info->SubordinateBusNumber,
- ((u16)info->IOBase << 8) & 0xF000,
- info->IOLimit ?
- ((u16)info->IOLimit << 8) | 0xFFF : 0,
- ((u32)info->MemoryBase << 16) & 0xFFF00000,
- info->MemoryLimit ?
- ((u32)info->MemoryLimit << 16) | 0xFFFFF : 0,
- ((u32)info->PrefetchableMemoryBase << 16) & 0xFFF00000,
- info->PrefetchableMemoryLimit ?
- ((u32)info->PrefetchableMemoryLimit << 16) | 0xFFFFF : 0,
- info->BridgeControl);
- }
- printk("\n");
-}
-
-/****************************************************************************
-RETURNS:
-Number of display devices found.
-
-REMARKS:
-This function enumerates the number of available display devices on the
-PCI bus, and returns the number found.
-****************************************************************************/
-static int PCI_enumerateDevices(void)
-{
- int i,j;
- PCIBridgeInfo *info;
-
- /* If this is the first time we have been called, enumerate all */
- /* devices on the PCI bus. */
- if (NumPCI == -1) {
- for (i = 0; i < MAX_PCI_DEVICES; i++)
- PCI[i].dwSize = sizeof(PCI[i]);
- if ((NumPCI = PCI_enumerate(PCI,MAX_PCI_DEVICES)) == 0)
- return -1;
-
- /* Build a list of all PCI bridge devices */
- for (i = 0,NumBridges = 0,BridgeIndex[0] = -1; i < NumPCI; i++) {
- if (PCI[i].BaseClass == PCI_BRIDGE_CLASS) {
- if (NumBridges < MAX_PCI_DEVICES)
- BridgeIndex[NumBridges++] = i;
- }
- }
-
- /* Now build a list of all display class devices */
- for (i = 0,NumDevices = 1,DeviceIndex[0] = -1; i < NumPCI; i++) {
- if (PCI_IS_DISPLAY_CLASS(&PCI[i])) {
- if ((PCI[i].Command & 0x3) == 0x3) {
- DeviceIndex[0] = i;
- }
- else {
- if (NumDevices < MAX_PCI_DEVICES)
- DeviceIndex[NumDevices++] = i;
- }
- if (PCI[i].slot.p.Bus != 0) {
- /* This device is on a different bus than the primary */
- /* PCI bus, so it is probably an AGP device. Find the */
- /* AGP bus device that controls that bus so we can */
- /* control it. */
- for (j = 0; j < NumBridges; j++) {
- info = (PCIBridgeInfo*)&PCI[BridgeIndex[j]];
- if (info->SecondayBusNumber == PCI[i].slot.p.Bus) {
- AGPBridge = info;
- break;
- }
- }
- }
- }
- }
-
- /* Enumerate all PCI and bridge devices to log file */
- EnumeratePCI();
- }
- return NumDevices;
-}
-
-FILE *logfile;
-
-void printk(const char *fmt, ...)
-{
- va_list argptr;
- va_start(argptr, fmt);
- vfprintf(logfile, fmt, argptr);
- fflush(logfile);
- va_end(argptr);
-}
-
-int main(int argc,char *argv[])
-{
- while (argc > 1) {
- if (stricmp(argv[1],"-usev86") == 0) {
- useV86 = true;
- }
- else if (stricmp(argv[1],"-force") == 0) {
- forcePost = true;
- }
-#ifdef DEBUG
- else if (stricmp(argv[1],"-decode") == 0) {
- debugFlags |= DEBUG_DECODE_F;
- }
- else if (stricmp(argv[1],"-iotrace") == 0) {
- debugFlags |= DEBUG_IO_TRACE_F;
- }
-#endif
- else {
- printf("Usage: warmboot [-usev86] [-force] [-decode] [-iotrace]\n");
- exit(-1);
- }
- argc--;
- argv++;
- }
- if ((logfile = fopen("warmboot.log","w")) == NULL)
- exit(1);
-
- PM_init();
- if (!useV86) {
- /* Initialise the x86 BIOS emulator */
- BE_init(false,debugFlags,65536,&VGAInfo[0]);
- }
-
- /* Enumerate all devices (which POST's them at the same time) */
- if (PCI_enumerateDevices() < 1) {
- printk("No PCI display devices found!\n");
- return -1;
- }
-
- /* Post all the display controller BIOS'es */
- PCI_postControllers();
-
- /* Cleanup and exit the emulator */
- if (!useV86)
- BE_exit();
- fclose(logfile);
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/_aa_imp.asm b/board/MAI/bios_emulator/scitech/src/common/_aa_imp.asm
deleted file mode 100644
index 61a9024ab3..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/_aa_imp.asm
+++ /dev/null
@@ -1,51 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech Nucleus Audio Architecture
-;*
-;* Copyright (C) 1991-1998 SciTech Software, Inc.
-;* All rights reserved.
-;*
-;* ======================================================================
-;* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-;* | |
-;* |This copyrighted computer code contains proprietary technology |
-;* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-;* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-;* | |
-;* |The contents of this file are subject to the SciTech Nucleus |
-;* |License; you may *not* use this file or related software except in |
-;* |compliance with the License. You may obtain a copy of the License |
-;* |at http://www.scitechsoft.com/nucleus-license.txt |
-;* | |
-;* |Software distributed under the License is distributed on an |
-;* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-;* |implied. See the License for the specific language governing |
-;* |rights and limitations under the License. |
-;* | |
-;* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-;* ======================================================================
-;*
-;* Language: TASM 4.0 or NASM
-;* Environment: IBM PC 32 bit Protected Mode.
-;*
-;* Description: Module to implement the import stubs for all the Nucleus
-;* Audio API functions for Intel binary compatible drivers.
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac" ; Memory model macros
-
-BEGIN_IMPORTS_DEF _AA_exports
-SKIP_IMP AA_status ; Implemented in C code
-SKIP_IMP AA_errorMsg ; Implemented in C code
-SKIP_IMP AA_getDaysLeft ; Implemented in C code
-SKIP_IMP AA_registerLicense ; Implemented in C code
-SKIP_IMP AA_enumerateDevices ; Implemented in C code
-SKIP_IMP AA_loadDriver ; Implemented in C code
-DECLARE_IMP AA_unloadDriver
-DECLARE_IMP AA_saveOptions
-END_IMPORTS_DEF
-
- END
diff --git a/board/MAI/bios_emulator/scitech/src/common/_ga_imp.asm b/board/MAI/bios_emulator/scitech/src/common/_ga_imp.asm
deleted file mode 100644
index 5317600438..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/_ga_imp.asm
+++ /dev/null
@@ -1,136 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech Nucleus Graphics Architecture
-;*
-;* Copyright (C) 1991-1998 SciTech Software, Inc.
-;* All rights reserved.
-;*
-;* ======================================================================
-;* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-;* | |
-;* |This copyrighted computer code contains proprietary technology |
-;* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-;* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-;* | |
-;* |The contents of this file are subject to the SciTech Nucleus |
-;* |License; you may *not* use this file or related software except in |
-;* |compliance with the License. You may obtain a copy of the License |
-;* |at http://www.scitechsoft.com/nucleus-license.txt |
-;* | |
-;* |Software distributed under the License is distributed on an |
-;* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-;* |implied. See the License for the specific language governing |
-;* |rights and limitations under the License. |
-;* | |
-;* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-;* ======================================================================
-;*
-;* Language: TASM 4.0 or NASM
-;* Environment: IBM PC 32 bit Protected Mode.
-;*
-;* Description: Module to implement the import stubs for all the Nucleus
-;* Graphics API functions for Intel binary compatible drivers.
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac" ; Memory model macros
-
-BEGIN_IMPORTS_DEF __GA_exports
-SKIP_IMP GA_status,0 ; Implemented in C code
-SKIP_IMP GA_errorMsg,1 ; Implemented in C code
-SKIP_IMP GA_getDaysLeft,1 ; Implemented in C code
-SKIP_IMP GA_registerLicense,2 ; Implemented in C code
-SKIP_IMP GA_enumerateDevices,1 ; Implemented in C code
-SKIP_IMP GA_loadDriver,2 ; Implemented in C code
-DECLARE_IMP GA_setActiveDevice,1
-SKIP_IMP GA_reserved1,0 ; Implemented in C code
-DECLARE_IMP GA_unloadDriver,1
-DECLARE_IMP REF2D_loadDriver,6
-DECLARE_IMP REF2D_unloadDriver,2
-DECLARE_IMP GA_loadRef2d,5
-DECLARE_IMP GA_unloadRef2d,1
-DECLARE_IMP GA_softStereoInit,1
-DECLARE_IMP GA_softStereoOn,0
-DECLARE_IMP GA_softStereoScheduleFlip,2
-DECLARE_IMP GA_softStereoGetFlipStatus,0
-DECLARE_IMP GA_softStereoWaitTillFlipped,0
-DECLARE_IMP GA_softStereoOff,0
-DECLARE_IMP GA_softStereoExit,0
-DECLARE_IMP GA_saveModeProfile,2
-DECLARE_IMP GA_saveOptions,2
-DECLARE_IMP GA_saveCRTCTimings,1
-DECLARE_IMP GA_restoreCRTCTimings,1
-DECLARE_IMP DDC_init,1
-DECLARE_IMP DDC_readEDID,5
-DECLARE_IMP EDID_parse,3
-DECLARE_IMP MCS_begin,1
-DECLARE_IMP MCS_getCapabilitiesString,2
-DECLARE_IMP MCS_isControlSupported,1
-DECLARE_IMP MCS_enableControl,2
-DECLARE_IMP MCS_getControlMax,2
-DECLARE_IMP MCS_getControlValue,2
-DECLARE_IMP MCS_getControlValues,3
-DECLARE_IMP MCS_setControlValue,2
-DECLARE_IMP MCS_setControlValues,3
-DECLARE_IMP MCS_resetControl,1
-DECLARE_IMP MCS_saveCurrentSettings,0
-DECLARE_IMP MCS_getTimingReport,3
-DECLARE_IMP MCS_getSelfTestReport,3
-DECLARE_IMP MCS_end,0
-SKIP_IMP GA_loadInGUI,1 ; Implemented in C code
-DECLARE_IMP DDC_writeEDID,6
-DECLARE_IMP GA_useDoubleScan,1
-DECLARE_IMP GA_getMaxRefreshRate,4
-DECLARE_IMP GA_computeCRTCTimings,6
-DECLARE_IMP GA_addMode,5
-DECLARE_IMP GA_addRefresh,5
-DECLARE_IMP GA_delMode,5
-DECLARE_IMP N_getLogName,0
-SKIP_IMP2 N_log
-DECLARE_IMP MDBX_getErrCode,0
-DECLARE_IMP MDBX_getErrorMsg,0
-DECLARE_IMP MDBX_open,1
-DECLARE_IMP MDBX_close,0
-DECLARE_IMP MDBX_first,1
-DECLARE_IMP MDBX_last,1
-DECLARE_IMP MDBX_next,1
-DECLARE_IMP MDBX_prev,1
-DECLARE_IMP MDBX_insert,1
-DECLARE_IMP MDBX_update,1
-DECLARE_IMP MDBX_flush,0
-DECLARE_IMP MDBX_importINF,2
-SKIP_IMP GA_getGlobalOptions,2 ; Implemented in C code
-DECLARE_IMP GA_setGlobalOptions,1
-DECLARE_IMP GA_saveGlobalOptions,1
-DECLARE_IMP GA_getInternalName,1
-DECLARE_IMP GA_getNucleusConfigPath,0
-DECLARE_IMP GA_getFakePCIID,0
-SKIP_IMP GA_loadLibrary,3 ; Implemented in C code
-SKIP_IMP GA_isOEMVersion,1 ; Implemented in C code
-DECLARE_IMP GA_isLiteVersion,1
-DECLARE_IMP GA_getDisplaySerialNo,1
-DECLARE_IMP GA_getDisplayUserName,1
-SKIP_IMP GA_getCurrentDriver,1 ; Implemented in C code
-SKIP_IMP GA_getCurrentRef2d,1 ; Implemented in C code
-SKIP_IMP GA_getLicensedDevices,1 ; Implemented in C code
-DECLARE_IMP DDC_initExt,2
-DECLARE_IMP MCS_beginExt,2
-DECLARE_IMP GA_loadRegionMgr,3
-DECLARE_IMP GA_unloadRegionMgr,1
-DECLARE_IMP GA_getProcAddress,2
-DECLARE_IMP GA_enableVBEMode,5
-DECLARE_IMP GA_disableVBEMode,5
-DECLARE_IMP GA_loadModeProfile,2
-DECLARE_IMP GA_getCRTCTimings,4
-DECLARE_IMP GA_setCRTCTimings,4
-DECLARE_IMP GA_setDefaultRefresh,6
-DECLARE_IMP GA_saveMonitorInfo,2
-DECLARE_IMP GA_detectPnPMonitor,3
-SKIP_IMP3 GA_queryFunctions
-SKIP_IMP3 REF2D_queryFunctions
-END_IMPORTS_DEF
-
- END
-
diff --git a/board/MAI/bios_emulator/scitech/src/common/_gatimer.asm b/board/MAI/bios_emulator/scitech/src/common/_gatimer.asm
deleted file mode 100644
index 0194a62f98..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/_gatimer.asm
+++ /dev/null
@@ -1,248 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech Nucleus Graphics Architecture
-;*
-;* Copyright (C) 1991-1998 SciTech Software, Inc.
-;* All rights reserved.
-;*
-;* ======================================================================
-;* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-;* | |
-;* |This copyrighted computer code contains proprietary technology |
-;* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-;* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-;* | |
-;* |The contents of this file are subject to the SciTech Nucleus |
-;* |License; you may *not* use this file or related software except in |
-;* |compliance with the License. You may obtain a copy of the License |
-;* |at http://www.scitechsoft.com/nucleus-license.txt |
-;* | |
-;* |Software distributed under the License is distributed on an |
-;* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-;* |implied. See the License for the specific language governing |
-;* |rights and limitations under the License. |
-;* | |
-;* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-;* ======================================================================
-;*
-;* Language: 80386 Assembler, NASM or TASM
-;* Environment: IBM PC 32 bit Protected Mode.
-;*
-;* Description: Assembly support functions for the Nucleus library for
-;* the high resolution timing support functions provided by
-;* the Intel Pentium and compatible processors.
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac" ; Memory model macros
-
-header _gatimer
-
-begcodeseg _gatimer
-
-ifdef USE_NASM
-%macro mCPU_ID 0
-db 00Fh,0A2h
-%endmacro
-else
-MACRO mCPU_ID
-db 00Fh,0A2h
-ENDM
-endif
-
-ifdef USE_NASM
-%macro mRDTSC 0
-db 00Fh,031h
-%endmacro
-else
-MACRO mRDTSC
-db 00Fh,031h
-ENDM
-endif
-
-;----------------------------------------------------------------------------
-; bool _GA_haveCPUID(void)
-;----------------------------------------------------------------------------
-; Determines if we have support for the CPUID instruction.
-;----------------------------------------------------------------------------
-cprocstart _GA_haveCPUID
-
- enter_c
- pushfd ; Get original EFLAGS
- pop eax
- mov ecx, eax
- xor eax, 200000h ; Flip ID bit in EFLAGS
- push eax ; Save new EFLAGS value on stack
- popfd ; Replace current EFLAGS value
- pushfd ; Get new EFLAGS
- pop eax ; Store new EFLAGS in EAX
- xor eax, ecx ; Can not toggle ID bit,
- jnz @@1 ; Processor=80486
- mov eax,0 ; We dont have CPUID support
- jmp @@Done
-@@1: mov eax,1 ; We have CPUID support
-@@Done: leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uint _GA_getCPUIDFeatures(void)
-;----------------------------------------------------------------------------
-; Determines the CPU type using the CPUID instruction.
-;----------------------------------------------------------------------------
-cprocstart _GA_getCPUIDFeatures
-
- enter_c
-
- xor eax, eax ; Set up for CPUID instruction
- mCPU_ID ; Get and save vendor ID
- cmp eax, 1 ; Make sure 1 is valid input for CPUID
- jl @@Fail ; We dont have the CPUID instruction
- xor eax, eax
- inc eax
- mCPU_ID ; Get family/model/stepping/features
- mov eax, edx
-@@Done: leave_c
- ret
-
-@@Fail: xor eax,eax
- jmp @@Done
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _GA_readTimeStamp(GA_largeInteger *time)
-;----------------------------------------------------------------------------
-; Reads the time stamp counter and returns the 64-bit result.
-;----------------------------------------------------------------------------
-cprocstart _GA_readTimeStamp
-
- mRDTSC
- mov ecx,[esp+4] ; Access directly without stack frame
- mov [ecx],eax
- mov [ecx+4],edx
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; N_uint32 GA_TimerDifference(GA_largeInteger *a,GA_largeInteger *b)
-;----------------------------------------------------------------------------
-; Computes the difference between two 64-bit numbers (a-b)
-;----------------------------------------------------------------------------
-cprocstart GA_TimerDifference
-
- ARG a:DPTR, b:DPTR, t:DPTR
-
- enter_c
-
- mov ecx,[a]
- mov eax,[ecx] ; EAX := b.low
- mov ecx,[b]
- sub eax,[ecx]
- mov edx,eax ; EDX := low difference
- mov ecx,[a]
- mov eax,[ecx+4] ; ECX := b.high
- mov ecx,[b]
- sbb eax,[ecx+4] ; EAX := high difference
- mov eax,edx ; Return low part
-
- leave_c
- ret
-
-cprocend
-
-; Macro to delay briefly to ensure that enough time has elapsed between
-; successive I/O accesses so that the device being accessed can respond
-; to both accesses even on a very fast PC.
-
-ifdef USE_NASM
-%macro DELAY_TIMER 0
- jmp short $+2
- jmp short $+2
- jmp short $+2
-%endmacro
-else
-macro DELAY_TIMER
- jmp short $+2
- jmp short $+2
- jmp short $+2
-endm
-endif
-
-;----------------------------------------------------------------------------
-; void _OS_delay8253(N_uint32 microSeconds);
-;----------------------------------------------------------------------------
-; Delays for the specified number of microseconds, by directly programming
-; the 8253 timer chips.
-;----------------------------------------------------------------------------
-cprocstart _OS_delay8253
-
- ARG microSec:UINT
-
- enter_c
-
-; Start timer 2 counting
-
- mov _ax,[microSec] ; EAX := count in microseconds
- mov ecx,1196
- mul ecx
- mov ecx,1000
- div ecx
- mov ecx,eax ; ECX := count in timer ticks
- in al,61h
- or al,1
- out 61h,al
-
-; Set the timer 2 count to 0 again to start the timing interval.
-
- mov al,10110100b ; set up to load initial (timer 2)
- out 43h,al ; timer count
- DELAY_TIMER
- sub al,al
- out 42h,al ; load count lsb
- DELAY_TIMER
- out 42h,al ; load count msb
- xor di,di ; Allow max 64K loop iterations
-
-@@LoopStart:
- dec di ; This is a guard against the possibility that
- jz @@LoopEnd ; someone eg. stopped the timer behind our back.
- ; After 64K iterations we bail out no matter what
- ; (and hope it wasn't too soon)
- mov al,00000000b ; latch timer 0
- out 43h,al
- DELAY_TIMER
- in al,42h ; least significant byte
- DELAY_TIMER
- mov ah,al
- in al,42h ; most significant byte
- xchg ah,al
- neg ax ; Convert from countdown remaining
- ; to elapsed count
- cmp ax,cx ; Has delay expired?
- jb @@LoopStart ; No, so loop till done
-
-; Stop timer 2 from counting
-@@LoopEnd:
- in al,61H
- and al,0FEh
- out 61H,al
-
-; Some programs have a problem if we change the control port; better change it
-; to something they expect (mode 3 - square wave generator)...
- mov al,0B6h
- out 43h,al
-
- leave_c
- ret
-
-cprocend
-
-endcodeseg _gatimer
-
- END
-
diff --git a/board/MAI/bios_emulator/scitech/src/common/_pm_imp.asm b/board/MAI/bios_emulator/scitech/src/common/_pm_imp.asm
deleted file mode 100644
index d4b11790af..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/_pm_imp.asm
+++ /dev/null
@@ -1,195 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* Copyright (C) 1991-1998 SciTech Software, Inc.
-;* All rights reserved.
-;*
-;* ======================================================================
-;* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-;* | |
-;* |This copyrighted computer code contains proprietary technology |
-;* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-;* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-;* | |
-;* |The contents of this file are subject to the SciTech Nucleus |
-;* |License; you may *not* use this file or related software except in |
-;* |compliance with the License. You may obtain a copy of the License |
-;* |at http://www.scitechsoft.com/nucleus-license.txt |
-;* | |
-;* |Software distributed under the License is distributed on an |
-;* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-;* |implied. See the License for the specific language governing |
-;* |rights and limitations under the License. |
-;* | |
-;* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-;* ======================================================================
-;*
-;* Language: TASM 4.0 or NASM
-;* Environment: IBM PC 32 bit Protected Mode.
-;*
-;* Description: Module to implement the import stubs for all the PM
-;* API functions for Intel binary portable drivers.
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac" ; Memory model macros
-
-BEGIN_IMPORTS_DEF _PM_imports
-DECLARE_IMP PM_getModeType,0
-DECLARE_IMP PM_getBIOSPointer,0
-DECLARE_IMP PM_getA0000Pointer,0
-DECLARE_IMP PM_mapPhysicalAddr,0
-DECLARE_IMP PM_mallocShared,0
-SKIP_IMP _PM_reserved1,0
-DECLARE_IMP PM_freeShared,0
-DECLARE_IMP PM_mapToProcess,0
-DECLARE_IMP PM_mapRealPointer,0
-DECLARE_IMP PM_allocRealSeg,0
-DECLARE_IMP PM_freeRealSeg,0
-DECLARE_IMP PM_allocLockedMem,0
-DECLARE_IMP PM_freeLockedMem,0
-DECLARE_IMP PM_callRealMode,0
-DECLARE_IMP PM_int86,0
-DECLARE_IMP PM_int86x,0
-DECLARE_IMP DPMI_int86,0
-DECLARE_IMP PM_availableMemory,0
-DECLARE_IMP PM_getVESABuf,0
-DECLARE_IMP PM_getOSType,0
-DECLARE_IMP PM_fatalError,0
-DECLARE_IMP PM_setBankA,0
-DECLARE_IMP PM_setBankAB,0
-DECLARE_IMP PM_setCRTStart,0
-DECLARE_IMP PM_getCurrentPat,0
-DECLARE_IMP PM_getVBEAFPath,0
-DECLARE_IMP PM_getNucleusPath,0
-DECLARE_IMP PM_getNucleusConfigPath,0
-DECLARE_IMP PM_getUniqueID,0
-DECLARE_IMP PM_getMachineName,0
-DECLARE_IMP VF_available,0
-DECLARE_IMP VF_init,0
-DECLARE_IMP VF_exit,0
-DECLARE_IMP PM_openConsole,0
-DECLARE_IMP PM_getConsoleStateSize,0
-DECLARE_IMP PM_saveConsoleState,0
-DECLARE_IMP PM_restoreConsoleState,0
-DECLARE_IMP PM_closeConsole,0
-DECLARE_IMP PM_setOSCursorLocation,0
-DECLARE_IMP PM_setOSScreenWidth,0
-DECLARE_IMP PM_enableWriteCombine,0
-DECLARE_IMP PM_backslash,0
-DECLARE_IMP PM_lockDataPages,0
-DECLARE_IMP PM_unlockDataPages,0
-DECLARE_IMP PM_lockCodePages,0
-DECLARE_IMP PM_unlockCodePages,0
-DECLARE_IMP PM_setRealTimeClockHandler,0
-DECLARE_IMP PM_setRealTimeClockFrequency,0
-DECLARE_IMP PM_restoreRealTimeClockHandler,0
-DECLARE_IMP PM_doBIOSPOST,0
-DECLARE_IMP PM_getBootDrive,0
-DECLARE_IMP PM_freePhysicalAddr,0
-DECLARE_IMP PM_inpb,0
-DECLARE_IMP PM_inpw,0
-DECLARE_IMP PM_inpd,0
-DECLARE_IMP PM_outpb,0
-DECLARE_IMP PM_outpw,0
-DECLARE_IMP PM_outpd,0
-SKIP_IMP _PM_reserved2,0
-DECLARE_IMP PM_setSuspendAppCallback,0
-DECLARE_IMP PM_haveBIOSAccess,0
-DECLARE_IMP PM_kbhit,0
-DECLARE_IMP PM_getch,0
-DECLARE_IMP PM_findBPD,0
-DECLARE_IMP PM_getPhysicalAddr,0
-DECLARE_IMP PM_sleep,0
-DECLARE_IMP PM_getCOMPort,0
-DECLARE_IMP PM_getLPTPort,0
-DECLARE_IMP PM_loadLibrary,0
-DECLARE_IMP PM_getProcAddress,0
-DECLARE_IMP PM_freeLibrary,0
-DECLARE_IMP PCI_enumerate,0
-DECLARE_IMP PCI_accessReg,0
-DECLARE_IMP PCI_setHardwareIRQ,0
-DECLARE_IMP PCI_generateSpecialCyle,0
-SKIP_IMP _PM_reserved3,0
-DECLARE_IMP PCIBIOS_getEntry,0
-DECLARE_IMP CPU_getProcessorType,0
-DECLARE_IMP CPU_haveMMX,0
-DECLARE_IMP CPU_have3DNow,0
-DECLARE_IMP CPU_haveSSE,0
-DECLARE_IMP CPU_haveRDTSC,0
-DECLARE_IMP CPU_getProcessorSpeed,0
-DECLARE_IMP ZTimerInit,0
-DECLARE_IMP LZTimerOn,0
-DECLARE_IMP LZTimerLap,0
-DECLARE_IMP LZTimerOff,0
-DECLARE_IMP LZTimerCount,0
-DECLARE_IMP LZTimerOnExt,0
-DECLARE_IMP LZTimerLapExt,0
-DECLARE_IMP LZTimerOffExt,0
-DECLARE_IMP LZTimerCountExt,0
-DECLARE_IMP ULZTimerOn,0
-DECLARE_IMP ULZTimerLap,0
-DECLARE_IMP ULZTimerOff,0
-DECLARE_IMP ULZTimerCount,0
-DECLARE_IMP ULZReadTime,0
-DECLARE_IMP ULZElapsedTime,0
-DECLARE_IMP ULZTimerResolution,0
-DECLARE_IMP PM_findFirstFile,0
-DECLARE_IMP PM_findNextFile,0
-DECLARE_IMP PM_findClose,0
-DECLARE_IMP PM_makepath,0
-DECLARE_IMP PM_splitpath,0
-DECLARE_IMP PM_driveValid,0
-DECLARE_IMP PM_getdcwd,0
-DECLARE_IMP PM_setFileAttr,0
-DECLARE_IMP PM_mkdir,0
-DECLARE_IMP PM_rmdir,0
-DECLARE_IMP PM_getFileAttr,0
-DECLARE_IMP PM_getFileTime,0
-DECLARE_IMP PM_setFileTime,0
-DECLARE_IMP CPU_getProcessorName,0
-DECLARE_IMP PM_getVGAStateSize,0
-DECLARE_IMP PM_saveVGAState,0
-DECLARE_IMP PM_restoreVGAState,0
-DECLARE_IMP PM_vgaBlankDisplay,0
-DECLARE_IMP PM_vgaUnblankDisplay,0
-DECLARE_IMP PM_blockUntilTimeout,0
-DECLARE_IMP _PM_add64,0
-DECLARE_IMP _PM_sub64,0
-DECLARE_IMP _PM_mul64,0
-DECLARE_IMP _PM_div64,0
-DECLARE_IMP _PM_shr64,0
-DECLARE_IMP _PM_sar64,0
-DECLARE_IMP _PM_shl64,0
-DECLARE_IMP _PM_neg64,0
-DECLARE_IMP PCI_findBARSize,0
-DECLARE_IMP PCI_readRegBlock,0
-DECLARE_IMP PCI_writeRegBlock,0
-DECLARE_IMP PM_flushTLB,0
-DECLARE_IMP PM_useLocalMalloc,0
-DECLARE_IMP PM_malloc,0
-DECLARE_IMP PM_calloc,0
-DECLARE_IMP PM_realloc,0
-DECLARE_IMP PM_free,0
-DECLARE_IMP PM_getPhysicalAddrRange,0
-DECLARE_IMP PM_allocPage,0
-DECLARE_IMP PM_freePage,0
-DECLARE_IMP PM_agpInit,0
-DECLARE_IMP PM_agpExit,0
-DECLARE_IMP PM_agpReservePhysical,0
-DECLARE_IMP PM_agpReleasePhysical,0
-DECLARE_IMP PM_agpCommitPhysical,0
-DECLARE_IMP PM_agpFreePhysical,0
-DECLARE_IMP PCI_getNumDevices,0
-DECLARE_IMP PM_setLocalBPDPath,0
-DECLARE_IMP PM_loadDirectDraw,0
-DECLARE_IMP PM_unloadDirectDraw,0
-DECLARE_IMP PM_getDirectDrawWindow,0
-DECLARE_IMP PM_doSuspendApp,0
-END_IMPORTS_DEF
-
- END
-
diff --git a/board/MAI/bios_emulator/scitech/src/common/aabeos.c b/board/MAI/bios_emulator/scitech/src/common/aabeos.c
deleted file mode 100644
index ad5698a406..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/aabeos.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: Linux
-*
-* Description: OS specific Nucleus Graphics Architecture services for
-* the Linux operating system.
-*
-****************************************************************************/
-
-#include "nucleus/graphics.h"
-#include <sys/time.h>
-
-static ibool haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-GA_sharedInfo * NAPI GA_getSharedInfo(
- int device)
-{
- (void)device;
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
- GA_exports *gaExp)
-{
- (void)gaExp;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
- haveRDTSC = true;
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
- GA_largeInteger *value)
-{
- if (haveRDTSC)
- _GA_readTimeStamp(value);
- else {
- struct timeval t;
- gettimeofday(&t, NULL);
- value->low = t.tv_sec*1000000 + t.tv_usec;
- value->high = 0;
- }
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/aados.c b/board/MAI/bios_emulator/scitech/src/common/aados.c
deleted file mode 100644
index 342d2f33a4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/aados.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: MSDOS
-*
-* Description: OS specific Nucleus Graphics Architecture services for
-* the MSDOS operating system.
-*
-****************************************************************************/
-
-#include "pm_help.h"
-#include "pmapi.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the DOS
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
- return true;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
- GA_largeInteger *value)
-{
- _GA_readTimeStamp(value);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/aalib.c b/board/MAI/bios_emulator/scitech/src/common/aalib.c
deleted file mode 100644
index 5003b22291..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/aalib.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Audio Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: Any 32-bit protected mode environment
-*
-* Description: C module for the Graphics Accelerator Driver API. Uses
-* the SciTech PM library for interfacing with DOS
-* extender specific functions.
-*
-****************************************************************************/
-
-#include "nucleus/audio.h"
-#ifdef __WIN32_VXD__
-#include "sdd/sddhelp.h"
-#else
-#include <stdio.h>
-#include <stdlib.h>
-#endif
-
-/*---------------------------- Global Variables ---------------------------*/
-
-#ifdef TEST_HARNESS
-extern PM_imports _VARAPI _PM_imports;
-#else
-AA_exports _VARAPI _AA_exports;
-static int loaded = false;
-static PE_MODULE *hModBPD = NULL;
-
-#ifdef __DRIVER__
-extern PM_imports _PM_imports;
-#else
-#include "pmimp.h"
-#endif
-
-static N_imports _N_imports = {
- sizeof(N_imports),
- _OS_delay,
- };
-
-#ifdef __DRIVER__
-extern AA_imports _AA_imports;
-#else
-static AA_imports _AA_imports = {
- sizeof(AA_imports),
- };
-#endif
-#endif
-
-/*----------------------------- Implementation ----------------------------*/
-
-#define DLL_NAME "audio.bpd"
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Fatal error handler for non-exported AA_exports.
-****************************************************************************/
-static void _AA_fatalErrorHandler(void)
-{
- PM_fatalError("Unsupported Nucleus export function called! Please upgrade your copy of Nucleus!\n");
-}
-
-/****************************************************************************
-REMARKS:
-Loads the Nucleus binary portable DLL into memory and initilises it.
-****************************************************************************/
-static ibool LoadDriver(void)
-{
- AA_initLibrary_t AA_initLibrary;
- AA_exports *aaExp;
- char filename[PM_MAX_PATH];
- char bpdpath[PM_MAX_PATH];
- int i,max;
- ulong *p;
-
- /* Check if we have already loaded the driver */
- if (loaded)
- return true;
- PM_init();
- _AA_exports.dwSize = sizeof(_AA_exports);
-
- /* Open the BPD file */
- if (!PM_findBPD(DLL_NAME,bpdpath))
- return false;
- strcpy(filename,bpdpath);
- strcat(filename,DLL_NAME);
- if ((hModBPD = PE_loadLibrary(filename,false)) == NULL)
- return false;
- if ((AA_initLibrary = (AA_initLibrary_t)PE_getProcAddress(hModBPD,"_AA_initLibrary")) == NULL)
- return false;
- bpdpath[strlen(bpdpath)-1] = 0;
- if (strcmp(bpdpath,PM_getNucleusPath()) == 0)
- strcpy(bpdpath,PM_getNucleusConfigPath());
- else {
- PM_backslash(bpdpath);
- strcat(bpdpath,"config");
- }
- if ((aaExp = AA_initLibrary(bpdpath,filename,&_PM_imports,&_N_imports,&_AA_imports)) == NULL)
- PM_fatalError("AA_initLibrary failed!\n");
-
- /* Initialize all default imports to point to fatal error handler
- * for upwards compatibility, and copy the exported functions.
- */
- max = sizeof(_AA_exports)/sizeof(AA_initLibrary_t);
- for (i = 0,p = (ulong*)&_AA_exports; i < max; i++)
- *p++ = (ulong)_AA_fatalErrorHandler;
- memcpy(&_AA_exports,aaExp,MIN(sizeof(_AA_exports),aaExp->dwSize));
- loaded = true;
- return true;
-}
-
-/* The following are stub entry points that the application calls to
- * initialise the Nucleus loader library, and we use this to load our
- * driver DLL from disk and initialise the library using it.
- */
-
-/* {secret} */
-int NAPI AA_status(void)
-{
- if (!loaded)
- return nDriverNotFound;
- return _AA_exports.AA_status();
-}
-
-/* {secret} */
-const char * NAPI AA_errorMsg(
- N_int32 status)
-{
- if (!loaded)
- return "Unable to load Nucleus device driver!";
- return _AA_exports.AA_errorMsg(status);
-}
-
-/* {secret} */
-int NAPI AA_getDaysLeft(void)
-{
- if (!LoadDriver())
- return -1;
- return _AA_exports.AA_getDaysLeft();
-}
-
-/* {secret} */
-int NAPI AA_registerLicense(uchar *license)
-{
- if (!LoadDriver())
- return 0;
- return _AA_exports.AA_registerLicense(license);
-}
-
-/* {secret} */
-int NAPI AA_enumerateDevices(void)
-{
- if (!LoadDriver())
- return 0;
- return _AA_exports.AA_enumerateDevices();
-}
-
-/* {secret} */
-AA_devCtx * NAPI AA_loadDriver(N_int32 deviceIndex)
-{
- if (!LoadDriver())
- return NULL;
- return _AA_exports.AA_loadDriver(deviceIndex);
-}
-#endif
-
-typedef struct {
- N_uint32 low;
- N_uint32 high;
- } AA_largeInteger;
-
-void NAPI _OS_delay8253(N_uint32 microSeconds);
-ibool NAPI _GA_haveCPUID(void);
-uint NAPI _GA_getCPUIDFeatures(void);
-void NAPI _GA_readTimeStamp(AA_largeInteger *time);
-#define CPU_HaveRDTSC 0x00000010
-
-/****************************************************************************
-REMARKS:
-This function delays for the specified number of microseconds
-****************************************************************************/
-void NAPI _OS_delay(
- N_uint32 microSeconds)
-{
- static ibool inited = false;
- LZTimerObject tm;
-
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0) {
- if (!inited) {
- ZTimerInit();
- inited = true;
- }
- LZTimerOnExt(&tm);
- while (LZTimerLapExt(&tm) < microSeconds)
- ;
- LZTimerOnExt(&tm);
- }
- else
- _OS_delay8253(microSeconds);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/aalinux.c b/board/MAI/bios_emulator/scitech/src/common/aalinux.c
deleted file mode 100644
index d3d468ed0f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/aalinux.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: Linux
-*
-* Description: OS specific Nucleus Graphics Architecture services for
-* the Linux operating system.
-*
-****************************************************************************/
-
-#include "nucleus/graphics.h"
-#include <sys/time.h>
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static ibool haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-GA_sharedInfo * NAPI GA_getSharedInfo(
- int device)
-{
- (void)device;
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
- GA_exports *gaExp)
-{
- (void)gaExp;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
- haveRDTSC = true;
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
- GA_largeInteger *value)
-{
- if (haveRDTSC)
- _GA_readTimeStamp(value);
- else {
- struct timeval t;
- gettimeofday(&t, NULL);
- value->low = t.tv_sec*1000000 + t.tv_usec;
- value->high = 0;
- }
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/aaos2.c b/board/MAI/bios_emulator/scitech/src/common/aaos2.c
deleted file mode 100644
index 0ec8c9fcf1..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/aaos2.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: OS/2 32-bit
-*
-* Description: OS specific Nucleus Graphics Architecture services for
-* the OS/2 operating system environments.
-*
-****************************************************************************/
-
-#include "pm_help.h"
-#define INCL_DOSERRORS
-#define INCL_DOS
-#define INCL_SUB
-#define INCL_VIO
-#define INCL_KBD
-#include <os2.h>
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static HFILE hSDDHelp;
-static ulong outLen; /* Must not cross 64Kb boundary! */
-static ulong result; /* Must not cross 64Kb boundary! */
-static ibool haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-REMARKS:
-This function returns a pointer to the common graphics driver loaded in the
-helper VxD. The memory for the VxD is shared between all processes via
-the VxD, so that the VxD, 16-bit code and 32-bit code all see the same
-state when accessing the graphics binary portable driver.
-****************************************************************************/
-GA_sharedInfo * NAPI GA_getSharedInfo(
- int device)
-{
- /* Initialise the PM library and connect to our runtime DLL's */
- PM_init();
-
- /* Open our helper device driver */
- if (DosOpen(PMHELP_NAME,&hSDDHelp,&result,0,0,
- FILE_OPEN, OPEN_SHARE_DENYNONE | OPEN_ACCESS_READWRITE,
- NULL))
- PM_fatalError("Unable to open SDDHELP$ helper device driver!");
- outLen = sizeof(result);
- DosDevIOCtl(hSDDHelp,PMHELP_IOCTL,PMHELP_GETSHAREDINFO,
- NULL, 0, NULL,
- &result, outLen, &outLen);
- DosClose(hSDDHelp);
- if (result) {
- /* We have found the shared Nucleus packet. Because not all processes
- * map to SDDPMI.DLL, we need to ensure that we connect to this
- * DLL so that it gets mapped into our address space (that is
- * where the shared Nucleus packet is located). Simply doing a
- * DosLoadModule on it is enough for this.
- */
- HMODULE hModSDDPMI;
- char buf[80];
- DosLoadModule((PSZ)buf,sizeof(buf),(PSZ)"SDDPMI.DLL",&hModSDDPMI);
- }
- return (GA_sharedInfo*)result;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
- GA_exports *gaExp)
-{
- (void)gaExp;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
- haveRDTSC = true;
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
- GA_largeInteger *value)
-{
- if (haveRDTSC)
- _GA_readTimeStamp(value);
- else
- DosTmrQueryTime((QWORD*)value);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/aaqnx.c b/board/MAI/bios_emulator/scitech/src/common/aaqnx.c
deleted file mode 100644
index 13531be99f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/aaqnx.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: QNX
-*
-* Description: OS specific Nucleus Graphics Architecture services for
-* the QNX operating system.
-*
-****************************************************************************/
-
-#include "nucleus/graphics.h"
-#include <time.h>
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static ibool haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-GA_sharedInfo * NAPI GA_getSharedInfo(
- int device)
-{
- (void)device;
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
- GA_exports *gaExp)
-{
- (void)gaExp;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
- haveRDTSC = true;
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
- GA_largeInteger *value)
-{
- if (haveRDTSC)
- _GA_readTimeStamp(value);
- else {
- struct timespec ts;
-
- clock_gettime(CLOCK_REALTIME, &ts);
- value->low = (ts.tv_nsec / 1000 + ts.tv_sec * 1000000);
- value->high = 0;
- }
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/aartt.c b/board/MAI/bios_emulator/scitech/src/common/aartt.c
deleted file mode 100644
index 1a5a67a4e9..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/aartt.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: RTTarget-32
-*
-* Description: OS specific Nucleus Graphics Architecture services for
-* the RTTarget-32 operating system environments.
-*
-****************************************************************************/
-
-#include "nucleus/graphics.h"
-
-/*------------------------- Global Variables ------------------------------*/
-
-static ibool haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-GA_sharedInfo * NAPI GA_getSharedInfo(
- int device)
-{
- (void)device;
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
- GA_exports *gaExp)
-{
- (void)gaExp;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0) {
- haveRDTSC = true;
- return true;
- }
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
- GA_largeInteger *value)
-{
- if (haveRDTSC)
- _GA_readTimeStamp(value);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/aasmx.c b/board/MAI/bios_emulator/scitech/src/common/aasmx.c
deleted file mode 100644
index 163060f717..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/aasmx.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: smx32
-*
-* Description: OS specific Nucleus Graphics Architecture services for
-* the smx32 platform -- no vxD support.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "nucleus/graphics.h"
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-GA_sharedInfo * NAPI GA_getSharedInfo(
- int device)
-{
- (void)device;
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
- GA_exports *gaExp)
-{
- (void)gaExp;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
- return true;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
- GA_largeInteger *value)
-{
- _GA_readTimeStamp(value);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/aavxd.c b/board/MAI/bios_emulator/scitech/src/common/aavxd.c
deleted file mode 100644
index 221b02bd9b..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/aavxd.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: Win32 VxD
-*
-* Description: OS specific Nucleus Graphics Architecture services for
-* the Win32 VxD's.
-*
-****************************************************************************/
-
-#include "sdd/sddhelp.h"
-
-/*------------------------- Global Variables ------------------------------*/
-
-static ibool haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-REMARKS:
-Return the internal shared info structure.
-****************************************************************************/
-GA_sharedInfo * NAPI GA_getSharedInfo(
- int device)
-{
- static GA_sharedInfo shared = {0,-1};
- return &shared;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
- GA_exports *gaExp)
-{
- (void)gaExp;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0) {
- haveRDTSC = true;
- }
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
- GA_largeInteger *value)
-{
- if (haveRDTSC)
- _GA_readTimeStamp(value);
- else
- VTD_Get_Real_Time(&value->high,&value->low);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/aawin32.c b/board/MAI/bios_emulator/scitech/src/common/aawin32.c
deleted file mode 100644
index 541df4ac58..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/aawin32.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: Win32
-*
-* Description: OS specific Nucleus Graphics Architecture services for
-* the Win32 operating system environments.
-*
-****************************************************************************/
-
-#include "pm_help.h"
-#include "pmapi.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#define STRICT
-#define WIN32_LEAN_AND_MEAN
-#include <windows.h>
-
-/*------------------------- Global Variables ------------------------------*/
-
-#if GA_MAX_DEVICES > 4
-#error GA_MAX_DEVICES has changed!
-#endif
-
-static ibool haveRDTSC;
-static GA_largeInteger countFreq;
-static GA_loadDriver_t ORG_GA_loadDriver;
-extern HANDLE _PM_hDevice;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-DESCRIPTION:
-Get the current graphics driver imports from the VxD
-
-REMARKS:
-This function returns a pointer to the common graphics driver loaded in the
-helper VxD. The memory for the VxD is shared between all processes via
-the VxD, so that the VxD, 16-bit code and 32-bit code all see the same
-state when accessing the graphics binary portable driver.
-****************************************************************************/
-GA_sharedInfo * NAPI GA_getSharedInfo(
- int device)
-{
- DWORD inBuf[1]; /* Buffer to send data to VxD */
- DWORD outBuf[2]; /* Buffer to receive data from VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- PM_init();
- inBuf[0] = device;
- if (DeviceIoControl(_PM_hDevice, PMHELP_GETSHAREDINFO32, inBuf, sizeof(inBuf),
- outBuf, sizeof(outBuf), &count, NULL)) {
- return (GA_sharedInfo*)outBuf[0];
- }
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
- GA_exports *gaExp)
-{
- (void)gaExp;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function initialises the software stereo module by either calling
-the Nucleus libraries directly, or calling into the VxD if we are running
-on the shared Nucleus libraries loaded by the Windows VxD.
-****************************************************************************/
-static ibool NAPI _GA_softStereoInit(
- GA_devCtx *dc)
-{
- if (_PM_hDevice) {
- DWORD inBuf[1]; /* Buffer to send data to VxD */
- DWORD outBuf[1]; /* Buffer to receive data from VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- inBuf[0] = (ulong)dc;
- if (DeviceIoControl(_PM_hDevice, PMHELP_GASTEREOINIT32, inBuf, sizeof(inBuf),
- outBuf, sizeof(outBuf), &count, NULL)) {
- return outBuf[0];
- }
- }
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function turns on software stereo mode, either directly or via the VxD.
-****************************************************************************/
-static void NAPI _GA_softStereoOn(void)
-{
- if (_PM_hDevice) {
- DeviceIoControl(_PM_hDevice, PMHELP_GASTEREOON32, NULL, 0,
- NULL, 0, NULL, NULL);
- }
-}
-
-/****************************************************************************
-REMARKS:
-This function schedules a software stereo mode page flip, either directly
-or via the VxD.
-****************************************************************************/
-static void NAPI _GA_softStereoScheduleFlip(
- N_uint32 leftAddr,
- N_uint32 rightAddr)
-{
- if (_PM_hDevice) {
- DWORD inBuf[2]; /* Buffer to send data to VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- inBuf[0] = (ulong)leftAddr;
- inBuf[1] = (ulong)rightAddr;
- DeviceIoControl(_PM_hDevice, PMHELP_GASTEREOFLIP32, inBuf, sizeof(inBuf),
- NULL, 0, &count, NULL);
- }
-}
-
-/****************************************************************************
-REMARKS:
-This function turns off software stereo mode, either directly or via the VxD.
-****************************************************************************/
-static N_int32 NAPI _GA_softStereoGetFlipStatus(void)
-{
- if (_PM_hDevice) {
- DWORD outBuf[1]; /* Buffer to receive data from VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- if (DeviceIoControl(_PM_hDevice, PMHELP_GASTEREOFLIPSTATUS32, NULL, 0,
- outBuf, sizeof(outBuf), &count, NULL)) {
- return outBuf[0];
- }
- }
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-This function turns off software stereo mode, either directly or via the VxD.
-****************************************************************************/
-static void NAPI _GA_softStereoWaitTillFlipped(void)
-{
- while (!_GA_softStereoGetFlipStatus())
- ;
-}
-
-/****************************************************************************
-REMARKS:
-This function turns off software stereo mode, either directly or via the VxD.
-****************************************************************************/
-static void NAPI _GA_softStereoOff(void)
-{
- if (_PM_hDevice) {
- DeviceIoControl(_PM_hDevice, PMHELP_GASTEREOOFF32, NULL, 0,
- NULL, 0, NULL, NULL);
- }
-}
-
-/****************************************************************************
-REMARKS:
-This function disable the software stereo handler, either directly or via
-the VxD.
-****************************************************************************/
-static void NAPI _GA_softStereoExit(void)
-{
- if (_PM_hDevice) {
- DeviceIoControl(_PM_hDevice, PMHELP_GASTEREOEXIT32, NULL, 0,
- NULL, 0, NULL, NULL);
- }
-}
-
-/****************************************************************************
-REMARKS:
-We hook this function in here so that we can avoid the memory detect and
-other destructive sequences in the drivers if we are loading the driver
-from a Win32 application (our display drivers in contrast load them inside
-the VxD directly, but the control panel applets use this function).
-****************************************************************************/
-static GA_devCtx * NAPI _GA_loadDriver(
- N_int32 deviceIndex,
- N_int32 shared)
-{
- GA_devCtx *dc;
- DWORD inBuf[1];
- DWORD outBuf[1];
- N_int32 totalMemory = 0,oldIOPL;
-
- if (deviceIndex >= GA_MAX_DEVICES)
- PM_fatalError("DeviceIndex too large in GA_loadDriver!");
- PM_init();
- inBuf[0] = deviceIndex;
- if (DeviceIoControl(_PM_hDevice, PMHELP_GETMEMSIZE32,
- inBuf, sizeof(inBuf), outBuf, sizeof(outBuf), NULL, NULL))
- totalMemory = outBuf[0];
- if (totalMemory == 0)
- totalMemory = 8192;
- _GA_exports.GA_forceMemSize(totalMemory,shared);
- oldIOPL = PM_setIOPL(3);
- dc = ORG_GA_loadDriver(deviceIndex,shared);
- PM_setIOPL(oldIOPL);
- return dc;
-}
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0) {
- haveRDTSC = true;
- return true;
- }
- else if (QueryPerformanceFrequency((LARGE_INTEGER*)&countFreq)) {
- haveRDTSC = false;
- return true;
- }
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
- GA_largeInteger *value)
-{
- if (haveRDTSC)
- _GA_readTimeStamp(value);
- else
- QueryPerformanceCounter((LARGE_INTEGER*)value);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/agplib.c b/board/MAI/bios_emulator/scitech/src/common/agplib.c
deleted file mode 100644
index 476eedc873..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/agplib.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: Any 32-bit protected mode environment
-*
-* Description: C module for the Graphics Accelerator Driver API. Uses
-* the SciTech PM library for interfacing with DOS
-* extender specific functions.
-*
-****************************************************************************/
-
-#include "nucleus/graphics.h"
-#include "nucleus/agp.h"
-
-/*---------------------------- Global Variables ---------------------------*/
-
-#ifndef DEBUG_AGP_DRIVER
-static AGP_exports _AGP_exports;
-static int loaded = false;
-static PE_MODULE *hModBPD = NULL;
-
-static N_imports _N_imports = {
- sizeof(N_imports),
- _OS_delay,
- };
-
-static AGP_imports _AGP_imports = {
- sizeof(AGP_imports),
- };
-#endif
-
-#include "pmimp.h"
-
-/*----------------------------- Implementation ----------------------------*/
-
-#define DLL_NAME "agp.bpd"
-
-#ifndef DEBUG_AGP_DRIVER
-/****************************************************************************
-REMARKS:
-Fatal error handler for non-exported GA_exports.
-****************************************************************************/
-static void _AGP_fatalErrorHandler(void)
-{
- PM_fatalError("Unsupported AGP export function called! Please upgrade your copy of AGP!\n");
-}
-
-/****************************************************************************
-PARAMETERS:
-shared - True to load the driver into shared memory.
-
-REMARKS:
-Loads the Nucleus binary portable DLL into memory and initilises it.
-****************************************************************************/
-static ibool LoadDriver(void)
-{
- AGP_initLibrary_t AGP_initLibrary;
- AGP_exports *agpExp;
- char filename[PM_MAX_PATH];
- char bpdpath[PM_MAX_PATH];
- int i,max;
- ulong *p;
-
- /* Check if we have already loaded the driver */
- if (loaded)
- return true;
- PM_init();
-
- /* Open the BPD file */
- if (!PM_findBPD(DLL_NAME,bpdpath))
- return false;
- strcpy(filename,bpdpath);
- strcat(filename,DLL_NAME);
- if ((hModBPD = PE_loadLibrary(filename,false)) == NULL)
- return false;
- if ((AGP_initLibrary = (AGP_initLibrary_t)PE_getProcAddress(hModBPD,"_AGP_initLibrary")) == NULL)
- return false;
- bpdpath[strlen(bpdpath)-1] = 0;
- if (strcmp(bpdpath,PM_getNucleusPath()) == 0)
- strcpy(bpdpath,PM_getNucleusConfigPath());
- else {
- PM_backslash(bpdpath);
- strcat(bpdpath,"config");
- }
- if ((agpExp = AGP_initLibrary(bpdpath,filename,GA_getSystemPMImports(),&_N_imports,&_AGP_imports)) == NULL)
- PM_fatalError("AGP_initLibrary failed!\n");
- _AGP_exports.dwSize = sizeof(_AGP_exports);
- max = sizeof(_AGP_exports)/sizeof(AGP_initLibrary_t);
- for (i = 0,p = (ulong*)&_AGP_exports; i < max; i++)
- *p++ = (ulong)_AGP_fatalErrorHandler;
- memcpy(&_AGP_exports,agpExp,MIN(sizeof(_AGP_exports),agpExp->dwSize));
- loaded = true;
- return true;
-}
-
-/* The following are stub entry points that the application calls to
- * initialise the Nucleus loader library, and we use this to load our
- * driver DLL from disk and initialise the library using it.
- */
-
-/* {secret} */
-int NAPI AGP_status(void)
-{
- if (!loaded)
- return nDriverNotFound;
- return _AGP_exports.AGP_status();
-}
-
-/* {secret} */
-const char * NAPI AGP_errorMsg(
- N_int32 status)
-{
- if (!loaded)
- return "Unable to load Nucleus device driver!";
- return _AGP_exports.AGP_errorMsg(status);
-}
-
-/* {secret} */
-AGP_devCtx * NAPI AGP_loadDriver(N_int32 deviceIndex)
-{
- if (!LoadDriver())
- return NULL;
- return _AGP_exports.AGP_loadDriver(deviceIndex);
-}
-
-/* {secret} */
-void NAPI AGP_unloadDriver(
- AGP_devCtx *dc)
-{
- if (loaded)
- _AGP_exports.AGP_unloadDriver(dc);
-}
-
-/* {secret} */
-void NAPI AGP_getGlobalOptions(
- AGP_globalOptions *options)
-{
- if (LoadDriver())
- _AGP_exports.AGP_getGlobalOptions(options);
-}
-
-/* {secret} */
-void NAPI AGP_setGlobalOptions(
- AGP_globalOptions *options)
-{
- if (LoadDriver())
- _AGP_exports.AGP_setGlobalOptions(options);
-}
-
-/* {secret} */
-void NAPI AGP_saveGlobalOptions(
- AGP_globalOptions *options)
-{
- if (loaded)
- _AGP_exports.AGP_saveGlobalOptions(options);
-}
-#endif
-
-/* {secret} */
-void NAPI _OS_delay8253(N_uint32 microSeconds);
-
-/****************************************************************************
-REMARKS:
-This function delays for the specified number of microseconds
-****************************************************************************/
-void NAPI _OS_delay(
- N_uint32 microSeconds)
-{
- static ibool inited = false;
- static ibool haveRDTSC;
- LZTimerObject tm;
-
- if (!inited) {
-#ifndef __WIN32_VXD__
- /* This has been causing problems in VxD's for some reason, so for now */
- /* we avoid using it. */
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0) {
- ZTimerInit();
- haveRDTSC = true;
- }
- else
-#endif
- haveRDTSC = false;
- inited = true;
- }
- if (haveRDTSC) {
- LZTimerOnExt(&tm);
- while (LZTimerLapExt(&tm) < microSeconds)
- ;
- LZTimerOnExt(&tm);
- }
- else
- _OS_delay8253(microSeconds);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/center.c b/board/MAI/bios_emulator/scitech/src/common/center.c
deleted file mode 100644
index 68e17c2a94..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/center.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/****************************************************************************
-*
-* Display Doctor Windows Interface Code
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code is a proprietary trade secret of |
-* |SciTech Software, Inc., located at 505 Wall Street, Chico, CA 95928 |
-* |USA (www.scitechsoft.com). ANY UNAUTHORIZED POSSESSION, USE, |
-* |VIEWING, COPYING, MODIFICATION OR DISSEMINATION OF THIS CODE IS |
-* |STRICTLY PROHIBITED BY LAW. Unless you have current, express |
-* |written authorization from SciTech to possess or use this code, you |
-* |may be subject to civil and/or criminal penalties. |
-* | |
-* |If you received this code in error or you would like to report |
-* |improper use, please immediately contact SciTech Software, Inc. at |
-* |530-894-8400. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: C++ 3.0
-* Environment: Win16
-*
-* Description: Dialog driven configuration program for UniVBE and
-* WinDirect Professional products.
-*
-****************************************************************************/
-
-#include "center.h"
-
-/*------------------------------ Implementation ---------------------------*/
-
-void _EXPORT CenterWindow(HWND hWndCenter, HWND parent, BOOL repaint)
-/****************************************************************************
-*
-* Function: CenterWindow
-* Parameters: hWndCenter - Window to center
-* parent - Handle for parent window
-* repaint - true if window should be re-painted
-*
-* Description: Centers the specified window within the bounds of the
-* specified parent window. If the parent window is NULL, then
-* we center it using the Desktop window.
-*
-****************************************************************************/
-{
- HWND hWndParent = (parent ? parent : GetDesktopWindow());
- RECT RectParent;
- RECT RectCenter;
- int CenterX,CenterY,Height,Width;
-
- GetWindowRect(hWndParent, &RectParent);
- GetWindowRect(hWndCenter, &RectCenter);
-
- Width = (RectCenter.right - RectCenter.left);
- Height = (RectCenter.bottom - RectCenter.top);
- CenterX = ((RectParent.right - RectParent.left) - Width) / 2;
- CenterY = ((RectParent.bottom - RectParent.top) - Height) / 2;
-
- if ((CenterX < 0) || (CenterY < 0)) {
- /* The Center Window is smaller than the parent window. */
- if (hWndParent != GetDesktopWindow()) {
- /* If the parent window is not the desktop use the desktop size. */
- CenterX = (GetSystemMetrics(SM_CXSCREEN) - Width) / 2;
- CenterY = (GetSystemMetrics(SM_CYSCREEN) - Height) / 2;
- }
- CenterX = (CenterX < 0) ? 0: CenterX;
- CenterY = (CenterY < 0) ? 0: CenterY;
- }
- else {
- CenterX += RectParent.left;
- CenterY += RectParent.top;
- }
-
- /* Copy the values into RectCenter */
- RectCenter.left = CenterX;
- RectCenter.right = CenterX + Width;
- RectCenter.top = CenterY;
- RectCenter.bottom = CenterY + Height;
-
- /* Move the window to the new location */
- MoveWindow(hWndCenter, RectCenter.left, RectCenter.top,
- (RectCenter.right - RectCenter.left),
- (RectCenter.bottom - RectCenter.top), repaint);
-}
-
-void _EXPORT CenterLogo(HWND hWndLogo, HWND hWndParent, int CenterY)
-/****************************************************************************
-*
-* Function: CenterLogo
-* Parameters: hWndLogo - Window to center
-* hWndParent - Handle for parent window
-* CenterY - Top coordinate for logo
-*
-* Description: Centers the specified window within the bounds of the
-* specified parent window in the horizontal direction only.
-*
-****************************************************************************/
-{
- RECT RectParent;
- RECT RectCenter;
- int CenterX,Height,Width;
-
- GetWindowRect(hWndParent, &RectParent);
- GetWindowRect(hWndLogo, &RectCenter);
- Width = (RectCenter.right - RectCenter.left);
- Height = (RectCenter.bottom - RectCenter.top);
- CenterX = ((RectParent.right - RectParent.left) - Width) / 2;
-
- /* Copy the values into RectCenter */
- RectCenter.left = CenterX;
- RectCenter.right = CenterX + Width;
- RectCenter.top = CenterY;
- RectCenter.bottom = CenterY + Height;
-
- /* Move the window to the new location */
- MoveWindow(hWndLogo, RectCenter.left, RectCenter.top,
- (RectCenter.right - RectCenter.left),
- (RectCenter.bottom - RectCenter.top), false);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/cmdline.c b/board/MAI/bios_emulator/scitech/src/common/cmdline.c
deleted file mode 100644
index 531e5e1312..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/cmdline.c
+++ /dev/null
@@ -1,428 +0,0 @@
-/****************************************************************************
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: any
-*
-* Description: This module contains code to parse the command line,
-* extracting options and parameters in standard System V
-* style.
-*
-****************************************************************************/
-
-#include <stdio.h>
-#include <string.h>
-#include <ctype.h>
-#include "cmdline.h"
-
-/*------------------------- Global variables ------------------------------*/
-
-int nextargv = 1; /* Index into argv array */
-char *nextchar = NULL; /* Pointer to next character */
-
-/*-------------------------- Implementation -------------------------------*/
-
-#define IS_SWITCH_CHAR(c) ((c) == '-')
-#define IS_NOT_SWITCH_CHAR(c) ((c) != '-')
-
-/****************************************************************************
-DESCRIPTION:
-Parse the command line for specific options
-
-HEADER:
-cmdline.h
-
-PARAMETERS:
-argc - Value passed to program through argc variable
-argv - Pointer to the argv array passed to the program
-format - A string representing the expected format of the command line
-argument - Pointer to optional argument on command line
-
-RETURNS:
-Character code representing the next option parsed from the command line by
-getcmdopt. Returns ALLDONE (-1) when there are no more parameters to be parsed
-on the command line, PARAMETER (-2) when the argument being parsed is a
-parameter and not an option switch and lastly INVALID (-3) if an error
-occured while parsing the command line.
-
-REMARKS:
-Function to parse the command line option switches in UNIX System V style.
-When getcmdopt is called, it returns the character code of the next valid
-option that is parsed from the command line as specified by the Format
-string. The format string should be in the following form:
-
- "abcd:e:f:"
-
-where a,b and c represent single switch style options and the character
-code returned by getcmdopt is the only value returned. Also d, e and f
-represent options that expect arguments immediately after them on the
-command line. The argument that follows the option on the command line is
-returned via a reference in the pointer argument. Thus a valid command line
-for this format string might be:
-
- myprogram -adlines -b -f format infile outfile
-
-where a and b will be returned as single character options with no argument,
-while d is returned with the argument lines and f is returned with the
-argument format.
-
-When getcmdopt returns with PARAMETER (we attempted to parse a paramter, not
-an option), the global variable NextArgv will hold an index in the argv
-array to the argument on the command line AFTER the options, ie in the
-above example the string 'infile'. If the parameter is successfully used,
-NextArgv should be incremented and getcmdopt can be called again to parse any
-more options. Thus you can also have options interspersed throught the
-command line. eg:
-
- myprogram -adlines infile -b outfile -f format
-
-can be made to be a valid form of the above command line.
-****************************************************************************/
-int getcmdopt(
- int argc,
- char **argv,
- char *format,
- char **argument)
-{
- char ch;
- char *formatchar;
-
- if (argc > nextargv) {
- if (nextchar == NULL) {
- nextchar = argv[nextargv]; /* Index next argument */
- if (nextchar == NULL) {
- nextargv++;
- return ALLDONE; /* No more options */
- }
- if (IS_NOT_SWITCH_CHAR(*nextchar)) {
- nextchar = NULL;
- return PARAMETER; /* We have a parameter */
- }
- nextchar++; /* Move past switch operator */
- if (IS_SWITCH_CHAR(*nextchar)) {
- nextchar = NULL;
- return INVALID; /* Ignore rest of line */
- }
- }
- if ((ch = *(nextchar++)) == 0) {
- nextchar = NULL;
- return INVALID; /* No options on line */
- }
-
- if (ch == ':' || (formatchar = strchr(format, ch)) == NULL)
- return INVALID;
-
- if (*(++formatchar) == ':') { /* Expect an argument after option */
- nextargv++;
- if (*nextchar == 0) {
- if (argc <= nextargv)
- return INVALID;
- nextchar = argv[nextargv++];
- }
- *argument = nextchar;
- nextchar = NULL;
- }
- else { /* We have a switch style option */
- if (*nextchar == 0) {
- nextargv++;
- nextchar = NULL;
- }
- *argument = NULL;
- }
- return ch; /* return the option specifier */
- }
- nextchar = NULL;
- nextargv++;
- return ALLDONE; /* no arguments on command line */
-}
-
-/****************************************************************************
-PARAMETERS:
-optarr - Description for the option we are parsing
-argument - String to parse
-
-RETURNS:
-INVALID on error, ALLDONE on success.
-
-REMARKS:
-Parses the argument string depending on the type of argument that is
-expected, filling in the argument for that option. Note that to parse a
-string, we simply return a pointer to argument.
-****************************************************************************/
-static int parse_option(
- Option *optarr,
- char *argument)
-{
- int num_read;
-
- switch ((int)(optarr->type)) {
- case OPT_INTEGER:
- num_read = sscanf(argument,"%d",(int*)optarr->arg);
- break;
- case OPT_HEX:
- num_read = sscanf(argument,"%x",(int*)optarr->arg);
- break;
- case OPT_OCTAL:
- num_read = sscanf(argument,"%o",(int*)optarr->arg);
- break;
- case OPT_UNSIGNED:
- num_read = sscanf(argument,"%u",(uint*)optarr->arg);
- break;
- case OPT_LINTEGER:
- num_read = sscanf(argument,"%ld",(long*)optarr->arg);
- break;
- case OPT_LHEX:
- num_read = sscanf(argument,"%lx",(long*)optarr->arg);
- break;
- case OPT_LOCTAL:
- num_read = sscanf(argument,"%lo",(long*)optarr->arg);
- break;
- case OPT_LUNSIGNED:
- num_read = sscanf(argument,"%lu",(ulong*)optarr->arg);
- break;
- case OPT_FLOAT:
- num_read = sscanf(argument,"%f",(float*)optarr->arg);
- break;
- case OPT_DOUBLE:
- num_read = sscanf(argument,"%lf",(double*)optarr->arg);
- break;
- case OPT_LDOUBLE:
- num_read = sscanf(argument,"%Lf",(long double*)optarr->arg);
- break;
- case OPT_STRING:
- num_read = 1; /* This always works */
- *((char**)optarr->arg) = argument;
- break;
- default:
- return INVALID;
- }
-
- if (num_read == 0)
- return INVALID;
- else
- return ALLDONE;
-}
-
-/****************************************************************************
-HEADER:
-cmdline.h
-
-PARAMETERS:
-argc - Number of arguments on command line
-argv - Array of command line arguments
-num_opt - Number of options in option array
-optarr - Array to specify how to parse the command line
-do_param - Routine to handle a command line parameter
-
-RETURNS:
-ALLDONE, INVALID or HELP
-
-REMARKS:
-Function to parse the command line according to a table of options. This
-routine calls getcmdopt above to parse each individual option and attempts
-to parse each option into a variable of the specified type. The routine
-can parse integers and long integers in either decimal, octal, hexadecimal
-notation, unsigned integers and unsigned longs, strings and option switches.
-Option switches are simply boolean variables that get turned on if the
-switch was parsed.
-
-Parameters are extracted from the command line by calling a user supplied
-routine do_param() to handle each parameter as it is encountered. The
-routine do_param() should accept a pointer to the parameter on the command
-line and an integer representing how many parameters have been encountered
-(ie: 1 if this is the first parameter, 10 if it is the 10th etc), and return
-ALLDONE upon successfully parsing it or INVALID if the parameter was invalid.
-
-We return either ALLDONE if all the options were successfully parsed,
-INVALID if an invalid option was encountered or HELP if any of -h, -H or
--? were present on the command line.
-****************************************************************************/
-int getargs(
- int argc,
- char *argv[],
- int num_opt,
- Option optarr[],
- int (*do_param)(
- char *param,
- int num))
-{
- int i,opt;
- char *argument;
- int param_num = 1;
- char cmdstr[MAXARG*2 + 4];
-
- /* Build the command string from the array of options */
-
- strcpy(cmdstr,"hH?");
- for (i = 0,opt = 3; i < num_opt; i++,opt++) {
- cmdstr[opt] = optarr[i].opt;
- if (optarr[i].type != OPT_SWITCH) {
- cmdstr[++opt] = ':';
- }
- }
- cmdstr[opt] = '\0';
-
- for (;;) {
- opt = getcmdopt(argc,argv,cmdstr,&argument);
- switch (opt) {
- case 'H':
- case 'h':
- case '?':
- return HELP;
- case ALLDONE:
- return ALLDONE;
- case INVALID:
- return INVALID;
- case PARAMETER:
- if (do_param == NULL)
- return INVALID;
- if (do_param(argv[nextargv],param_num) == INVALID)
- return INVALID;
- nextargv++;
- param_num++;
- break;
- default:
-
- /* Search for the option in the option array. We are
- * guaranteed to find it.
- */
-
- for (i = 0; i < num_opt; i++) {
- if (optarr[i].opt == opt)
- break;
- }
- if (optarr[i].type == OPT_SWITCH)
- *((ibool*)optarr[i].arg) = true;
- else {
- if (parse_option(&optarr[i],argument) == INVALID)
- return INVALID;
- }
- break;
- }
- }
-}
-
-/****************************************************************************
-HEADER:
-cmdline.h
-
-PARAMETERS:
-num_opt - Number of options in the table
-optarr - Table of option descriptions
-
-REMARKS:
-Prints the description of each option in a standard format to the standard
-output device. The description for each option is obtained from the table
-of options.
-****************************************************************************/
-void print_desc(
- int num_opt,
- Option optarr[])
-{
- int i;
-
- for (i = 0; i < num_opt; i++) {
- if (optarr[i].type == OPT_SWITCH)
- printf(" -%c %s\n",optarr[i].opt,optarr[i].desc);
- else
- printf(" -%c<arg> %s\n",optarr[i].opt,optarr[i].desc);
- }
-}
-
-/****************************************************************************
-HEADER:
-cmdline.h
-
-PARAMETERS:
-moduleName - Module name for program
-cmdLine - Command line to parse
-pargc - Pointer to 'argc' parameter
-pargv - Pointer to 'argv' parameter
-maxArgc - Maximum argv array index
-
-REMARKS:
-Parses a command line from a single string into the C style 'argc' and
-'argv' format. Most useful for Windows programs where the command line
-is passed in verbatim.
-****************************************************************************/
-int parse_commandline(
- char *moduleName,
- char *cmdLine,
- int *pargc,
- char *argv[],
- int maxArgv)
-{
- static char str[512];
- static char filename[260];
- char *prevWord = NULL;
- ibool inQuote = FALSE;
- ibool noStrip = FALSE;
- int argc;
-
- argc = 0;
- strcpy(filename,moduleName);
- argv[argc++] = filename;
- cmdLine = strncpy(str, cmdLine, sizeof(str)-1);
- while (*cmdLine) {
- switch (*cmdLine) {
- case '"' :
- if (prevWord != NULL) {
- if (inQuote) {
- if (!noStrip)
- *cmdLine = '\0';
- argv [argc++] = prevWord;
- prevWord = NULL;
- }
- else
- noStrip = TRUE;
- }
- inQuote = !inQuote;
- break;
- case ' ' :
- case '\t' :
- if (!inQuote) {
- if (prevWord != NULL) {
- *cmdLine = '\0';
- argv [argc++] = prevWord;
- prevWord = NULL;
- noStrip = FALSE;
- }
- }
- break;
- default :
- if (prevWord == NULL)
- prevWord = cmdLine;
- break;
- }
- if (argc >= maxArgv - 1)
- break;
- cmdLine++;
- }
-
- if ((prevWord != NULL || (inQuote && prevWord != NULL)) && argc < maxArgv - 1) {
- *cmdLine = '\0';
- argv [argc++] = prevWord;
- }
- argv[argc] = NULL;
-
- /* Return updated parameters */
- return (*pargc = argc);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/gabeos.c b/board/MAI/bios_emulator/scitech/src/common/gabeos.c
deleted file mode 100644
index a934bd1cfc..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/gabeos.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: Linux
-*
-* Description: OS specific Nucleus Graphics Architecture services for
-* the Linux operating system.
-*
-****************************************************************************/
-
-#include "nucleus/graphics.h"
-#include <sys/time.h>
-
-static ibool haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-path - Local path to the Nucleus driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable.
-****************************************************************************/
-void NAPI GA_setLocalPath(
- const char *path)
-{
- PM_setLocalBPDPath(path);
-}
-
-/****************************************************************************
-RETURNS:
-Pointer to the system wide PM library imports, or the internal version if none
-
-REMARKS:
-In order to support deploying new Nucleus drivers that may require updated
-PM library functions, we check here to see if there is a system wide version
-of the PM functions available. If so we return those functions for use with
-the system wide Nucleus drivers, otherwise the compiled in version of the PM
-library is used with the application local version of Nucleus.
-****************************************************************************/
-PM_imports * NAPI GA_getSystemPMImports(void)
-{
- /* TODO: We may very well want to provide a system shared library */
- /* that eports the PM functions required by the Nucleus library */
- /* for BeOS here. That will eliminate fatal errors loading new */
- /* drivers on BeOS! */
- return &_PM_imports;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
- GA_exports *gaExp,
- ibool shared)
-{
- (void)gaExp;
- (void)shared;
- return false;
-}
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI GA_queryFunctions(
- GA_devCtx *dc,
- N_uint32 id,
- void _FAR_ *funcs)
-{
- return __GA_exports.GA_queryFunctions(dc,id,funcs);
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI REF2D_queryFunctions(
- REF2D_driver *ref2d,
- N_uint32 id,
- void _FAR_ *funcs)
-{
- return __GA_exports.REF2D_queryFunctions(ref2d,id,funcs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
- haveRDTSC = true;
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
- GA_largeInteger *value)
-{
- if (haveRDTSC)
- _GA_readTimeStamp(value);
- else {
- struct timeval t;
- gettimeofday(&t, NULL);
- value->low = t.tv_sec*1000000 + t.tv_usec;
- value->high = 0;
- }
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/gados.c b/board/MAI/bios_emulator/scitech/src/common/gados.c
deleted file mode 100644
index d2be77694f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/gados.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: MSDOS
-*
-* Description: OS specific Nucleus Graphics Architecture services for
-* the MSDOS operating system.
-*
-****************************************************************************/
-
-#include "pm_help.h"
-#include "pmapi.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-path - Local path to the Nucleus driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable.
-****************************************************************************/
-void NAPI GA_setLocalPath(
- const char *path)
-{
- PM_setLocalBPDPath(path);
-}
-
-/****************************************************************************
-RETURNS:
-Pointer to the system wide PM library imports, or the internal version if none
-
-REMARKS:
-Nothing to do here for DOS. Basically since DOS has no system wide shared
-library mechanism we are essentially screwed if the binary API changes.
-By default for 32-bit DOS apps the local Nucleus drivers should always be
-used in preference to the system wide Nucleus drivers.
-****************************************************************************/
-PM_imports * NAPI GA_getSystemPMImports(void)
-{
- return &_PM_imports;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
- GA_exports *gaExp,
- ibool shared)
-{
- (void)gaExp;
- (void)shared;
- return false;
-}
-
-#if !defined(TEST_HARNESS) && !defined(VBETEST)
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI GA_queryFunctions(
- GA_devCtx *dc,
- N_uint32 id,
- void _FAR_ *funcs)
-{
- return __GA_exports.GA_queryFunctions(dc,id,funcs);
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI REF2D_queryFunctions(
- REF2D_driver *ref2d,
- N_uint32 id,
- void _FAR_ *funcs)
-{
- return __GA_exports.REF2D_queryFunctions(ref2d,id,funcs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the DOS
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
- return true;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
- GA_largeInteger *value)
-{
- _GA_readTimeStamp(value);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/galib.c b/board/MAI/bios_emulator/scitech/src/common/galib.c
deleted file mode 100644
index f2eacc3d24..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/galib.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: Any 32-bit protected mode environment
-*
-* Description: C module for the Graphics Accelerator Driver API. Uses
-* the SciTech PM library for interfacing with DOS
-* extender specific functions.
-*
-****************************************************************************/
-
-#include "nucleus/graphics.h"
-#if defined(__WIN32_VXD__) || defined(__NT_DRIVER__)
-#include "sdd/sddhelp.h"
-#else
-#include <stdio.h>
-#include <stdlib.h>
-#endif
-
-/*---------------------------- Global Variables ---------------------------*/
-
-#ifndef TEST_HARNESS
-GA_exports _VARAPI __GA_exports;
-static int loaded = false;
-static PE_MODULE *hModBPD = NULL;
-
-static N_imports _N_imports = {
- sizeof(N_imports),
- _OS_delay,
- };
-
-static GA_imports _GA_imports = {
- sizeof(GA_imports),
- GA_getSharedInfo,
- GA_TimerInit,
- GA_TimerRead,
- GA_TimerDifference,
- };
-#endif
-
-/*----------------------------- Implementation ----------------------------*/
-
-#define DLL_NAME "graphics.bpd"
-
-/****************************************************************************
-REMARKS:
-This function is no longer used but we must implement it and return NULL
-for compatibility with older binary drivers.
-****************************************************************************/
-GA_sharedInfo * NAPI GA_getSharedInfo(
- int device)
-{
- return NULL;
-}
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Fatal error handler for non-exported GA_exports.
-****************************************************************************/
-static void _GA_fatalErrorHandler(void)
-{
- PM_fatalError("Unsupported Nucleus export function called! Please upgrade your copy of Nucleus!\n");
-}
-
-/****************************************************************************
-PARAMETERS:
-shared - True to load the driver into shared memory.
-
-REMARKS:
-Loads the Nucleus binary portable DLL into memory and initilises it.
-****************************************************************************/
-static ibool LoadDriver(
- ibool shared)
-{
- GA_initLibrary_t GA_initLibrary;
- GA_exports *gaExp;
- char filename[PM_MAX_PATH];
- char bpdpath[PM_MAX_PATH];
- int i,max;
- ulong *p;
-
- /* Check if we have already loaded the driver */
- if (loaded)
- return true;
- PM_init();
-
- /* First try to see if we can find the system wide shared exports
- * if they are available. Under OS/2 this connects to our global
- * shared Nucleus loader in SDDPMI.DLL.
- */
- __GA_exports.dwSize = sizeof(__GA_exports);
- if (GA_getSharedExports(&__GA_exports,shared))
- return loaded = true;
-
- /* Open the BPD file */
- if (!PM_findBPD(DLL_NAME,bpdpath))
- return false;
- strcpy(filename,bpdpath);
- strcat(filename,DLL_NAME);
- if ((hModBPD = PE_loadLibrary(filename,shared)) == NULL)
- return false;
- if ((GA_initLibrary = (GA_initLibrary_t)PE_getProcAddress(hModBPD,"_GA_initLibrary")) == NULL)
- return false;
- bpdpath[strlen(bpdpath)-1] = 0;
- if (strcmp(bpdpath,PM_getNucleusPath()) == 0)
- strcpy(bpdpath,PM_getNucleusConfigPath());
- else {
- PM_backslash(bpdpath);
- strcat(bpdpath,"config");
- }
- if ((gaExp = GA_initLibrary(shared,bpdpath,filename,GA_getSystemPMImports(),&_N_imports,&_GA_imports)) == NULL)
- PM_fatalError("GA_initLibrary failed!\n");
-
- /* Initialize all default imports to point to fatal error handler
- * for upwards compatibility, and copy the exported functions.
- */
- max = sizeof(__GA_exports)/sizeof(GA_initLibrary_t);
- for (i = 0,p = (ulong*)&__GA_exports; i < max; i++)
- *p++ = (ulong)_GA_fatalErrorHandler;
- memcpy(&__GA_exports,gaExp,MIN(sizeof(__GA_exports),gaExp->dwSize));
- loaded = true;
- return true;
-}
-
-/* The following are stub entry points that the application calls to
- * initialise the Nucleus loader library, and we use this to load our
- * driver DLL from disk and initialise the library using it.
- */
-
-/* {secret} */
-int NAPI GA_status(void)
-{
- if (!loaded)
- return nDriverNotFound;
- return __GA_exports.GA_status();
-}
-
-/* {secret} */
-const char * NAPI GA_errorMsg(
- N_int32 status)
-{
- if (!loaded)
- return "Unable to load Nucleus device driver!";
- return __GA_exports.GA_errorMsg(status);
-}
-
-/* {secret} */
-int NAPI GA_getDaysLeft(N_int32 shared)
-{
- if (!LoadDriver(shared))
- return -1;
- return __GA_exports.GA_getDaysLeft(shared);
-}
-
-/* {secret} */
-int NAPI GA_registerLicense(uchar *license,N_int32 shared)
-{
- if (!LoadDriver(shared))
- return 0;
- return __GA_exports.GA_registerLicense(license,shared);
-}
-
-/* {secret} */
-ibool NAPI GA_loadInGUI(N_int32 shared)
-{
- if (!LoadDriver(shared))
- return false;
- return __GA_exports.GA_loadInGUI(shared);
-}
-
-/* {secret} */
-int NAPI GA_enumerateDevices(N_int32 shared)
-{
- if (!LoadDriver(shared))
- return 0;
- return __GA_exports.GA_enumerateDevices(shared);
-}
-
-/* {secret} */
-GA_devCtx * NAPI GA_loadDriver(N_int32 deviceIndex,N_int32 shared)
-{
- if (!LoadDriver(shared))
- return NULL;
- return __GA_exports.GA_loadDriver(deviceIndex,shared);
-}
-
-/* {secret} */
-void NAPI GA_getGlobalOptions(
- GA_globalOptions *options,
- ibool shared)
-{
- if (LoadDriver(shared))
- __GA_exports.GA_getGlobalOptions(options,shared);
-}
-
-/* {secret} */
-PE_MODULE * NAPI GA_loadLibrary(
- const char *szBPDName,
- ulong *size,
- ibool shared)
-{
- if (!LoadDriver(shared))
- return NULL;
- return __GA_exports.GA_loadLibrary(szBPDName,size,shared);
-}
-
-/* {secret} */
-GA_devCtx * NAPI GA_getCurrentDriver(
- N_int32 deviceIndex)
-{
- /* Bail for older drivers that didn't export this function! */
- if (!__GA_exports.GA_getCurrentDriver)
- return NULL;
- return __GA_exports.GA_getCurrentDriver(deviceIndex);
-}
-
-/* {secret} */
-REF2D_driver * NAPI GA_getCurrentRef2d(
- N_int32 deviceIndex)
-{
- /* Bail for older drivers that didn't export this function! */
- if (!__GA_exports.GA_getCurrentRef2d)
- return NULL;
- return __GA_exports.GA_getCurrentRef2d(deviceIndex);
-}
-
-/* {secret} */
-int NAPI GA_isOEMVersion(ibool shared)
-{
- if (!LoadDriver(shared))
- return 0;
- return __GA_exports.GA_isOEMVersion(shared);
-}
-
-/* {secret} */
-N_uint32 * NAPI GA_getLicensedDevices(ibool shared)
-{
- if (!LoadDriver(shared))
- return 0;
- return __GA_exports.GA_getLicensedDevices(shared);
-}
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/common/galinux.c b/board/MAI/bios_emulator/scitech/src/common/galinux.c
deleted file mode 100644
index 47e4e8581d..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/galinux.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: Linux
-*
-* Description: OS specific Nucleus Graphics Architecture services for
-* the Linux operating system.
-*
-****************************************************************************/
-
-#include "nucleus/graphics.h"
-#include <sys/time.h>
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static ibool haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-path - Local path to the Nucleus driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable.
-****************************************************************************/
-void NAPI GA_setLocalPath(
- const char *path)
-{
- PM_setLocalBPDPath(path);
-}
-
-/****************************************************************************
-RETURNS:
-Pointer to the system wide PM library imports, or the internal version if none
-
-REMARKS:
-In order to support deploying new Nucleus drivers that may require updated
-PM library functions, we check here to see if there is a system wide version
-of the PM functions available. If so we return those functions for use with
-the system wide Nucleus drivers, otherwise the compiled in version of the PM
-library is used with the application local version of Nucleus.
-****************************************************************************/
-PM_imports * NAPI GA_getSystemPMImports(void)
-{
- /* TODO: We may very well want to provide a system shared library */
- /* that eports the PM functions required by the Nucleus library */
- /* for Linux here. That will eliminate fatal errors loading new */
- /* drivers on Linux! */
- return &_PM_imports;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
- GA_exports *gaExp,
- ibool shared)
-{
- (void)gaExp;
- (void)shared;
- return false;
-}
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI GA_queryFunctions(
- GA_devCtx *dc,
- N_uint32 id,
- void _FAR_ *funcs)
-{
- return __GA_exports.GA_queryFunctions(dc,id,funcs);
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI REF2D_queryFunctions(
- REF2D_driver *ref2d,
- N_uint32 id,
- void _FAR_ *funcs)
-{
- return __GA_exports.REF2D_queryFunctions(ref2d,id,funcs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
- haveRDTSC = true;
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
- GA_largeInteger *value)
-{
- if (haveRDTSC)
- _GA_readTimeStamp(value);
- else {
- struct timeval t;
- gettimeofday(&t, NULL);
- value->low = t.tv_sec*1000000 + t.tv_usec;
- value->high = 0;
- }
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/gantdrv.c b/board/MAI/bios_emulator/scitech/src/common/gantdrv.c
deleted file mode 100644
index 050f73767c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/gantdrv.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: NT device driver
-*
-* Description: OS specific Nucleus Graphics Architecture services for
-* the NT device drivers.
-*
-****************************************************************************/
-
-#include "sdd/sddhelp.h"
-
-/*------------------------- Global Variables ------------------------------*/
-
-static ibool haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-path - Local path to the Nucleus driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable.
-****************************************************************************/
-void NAPI GA_setLocalPath(
- const char *path)
-{
- PM_setLocalBPDPath(path);
-}
-
-/****************************************************************************
-RETURNS:
-Pointer to the system wide PM library imports, or the internal version if none
-
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-PM_imports * NAPI GA_getSystemPMImports(void)
-{
- return &_PM_imports;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
- GA_exports *gaExp,
- ibool shared)
-{
- (void)gaExp;
- (void)shared;
- return false;
-}
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI GA_queryFunctions(
- GA_devCtx *dc,
- N_uint32 id,
- void _FAR_ *funcs)
-{
- return __GA_exports.GA_queryFunctions(dc,id,funcs);
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI REF2D_queryFunctions(
- REF2D_driver *ref2d,
- N_uint32 id,
- void _FAR_ *funcs)
-{
- return __GA_exports.REF2D_queryFunctions(ref2d,id,funcs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0) {
- haveRDTSC = true;
- }
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
- GA_largeInteger *value)
-{
- if (haveRDTSC)
- _GA_readTimeStamp(value);
- else
- KeQuerySystemTime((LARGE_INTEGER*)value);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/gaos2.c b/board/MAI/bios_emulator/scitech/src/common/gaos2.c
deleted file mode 100644
index 26e6503e5f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/gaos2.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: OS/2 32-bit
-*
-* Description: OS specific Nucleus Graphics Architecture services for
-* the OS/2 operating system environments.
-*
-****************************************************************************/
-
-#include "pm_help.h"
-#define INCL_DOSERRORS
-#define INCL_DOS
-#define INCL_SUB
-#define INCL_VIO
-#define INCL_KBD
-#include <os2.h>
-
-/*--------------------------- Global variables ----------------------------*/
-
-static ibool haveRDTSC = false;
-static ulong parms[3]; /* Must not cross 64Kb boundary! */
-static ulong result[4]; /* Must not cross 64Kb boundary! */
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-func - Helper device driver function to call
-
-RETURNS:
-First return value from the device driver in parmsOut[0]
-
-REMARKS:
-Function to open our helper device driver, call it and close the file
-handle. Note that we have to open the device driver for every call because
-of two problems:
-
- 1. We cannot open a single file handle in a DLL that is shared amongst
- programs, since every process must have it's own open file handle.
-
- 2. For some reason there appears to be a limit of about 12 open file
- handles on a device driver in the system. Hence when we open more
- than about 12 file handles things start to go very strange.
-
-Hence we simply open the file handle every time that we need to call the
-device driver to work around these problems.
-****************************************************************************/
-static ulong CallSDDHelp(
- int func)
-{
- static ulong inLen; /* Must not cross 64Kb boundary! */
- static ulong outLen; /* Must not cross 64Kb boundary! */
- HFILE hSDDHelp;
-
- /* If this code in here fails, we are screwed! Many of our drivers
- * use this code and don't have a C library, so we simply assume we
- * can't fail here.
- */
- DosOpen(PMHELP_NAME,&hSDDHelp,&result[0],0,0,
- FILE_OPEN, OPEN_SHARE_DENYNONE | OPEN_ACCESS_READWRITE,
- NULL);
- DosDevIOCtl(hSDDHelp,PMHELP_IOCTL,func,
- &parms, inLen = sizeof(parms), &inLen,
- &result, outLen = sizeof(result), &outLen);
- DosClose(hSDDHelp);
- return result[0];
-}
-
-/****************************************************************************
-PARAMETERS:
-path - Local path to the Nucleus driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable.
-****************************************************************************/
-void NAPI GA_setLocalPath(
- const char *path)
-{
- PM_setLocalBPDPath(path);
-}
-
-/****************************************************************************
-RETURNS:
-Pointer to the system wide PM library imports, or the internal version if none
-
-REMARKS:
-For OS/2 we don't need to do anything special because Nucleus is always
-loaded via the shared SDDPMI driver when SDD is loaded so we don't need
-a system wide PM library imports function.
-****************************************************************************/
-PM_imports * NAPI GA_getSystemPMImports(void)
-{
- return &_PM_imports;
-}
-
-/****************************************************************************
-PARAMETERS:
-gaExp - Place to store the exported functions
-shared - True if connecting to the shared, global Nucleus driver
-
-REMARKS:
-For OS/2 if SDD is loaded we *always* connect to the shared Nucleus functions
-contained within the SDDPMI driver. This allows the Nucleus functions contained
-within this driver to be utilised by all Nucleus apps in the system and
-maintains a consistent state between versions.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
- GA_exports *gaExp,
- ibool shared)
-{
- /* In test harness mode, we need to load a local copy of Nucleus */
-#if !defined (TEST_HARNESS) || defined (DEBUG_SDDPMI)
- HMODULE hModSDDPMI;
- char buf[80];
- GA_exports *exp;
-
- /* Initialise the PM library and connect to our runtime DLL's */
- PM_init();
- if (CallSDDHelp(PMHELP_GETSHAREDEXP) != 0) {
- /* We have found the shared Nucleus exports. Because not all processes
- * map to SDDPMI.DLL, we need to ensure that we connect to this
- * DLL so that it gets mapped into our address space (that is
- * where the shared Nucleus loader code is located). Simply doing a
- * DosLoadModule on it is enough for this.
- */
- DosLoadModule((PSZ)buf,sizeof(buf),(PSZ)"SDDPMI.DLL",&hModSDDPMI);
- exp = (GA_exports*)result[0];
- memcpy(gaExp,exp,MIN(gaExp->dwSize,exp->dwSize));
- return true;
- }
-#endif
- (void)shared;
- return false;
-}
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI GA_queryFunctions(
- GA_devCtx *dc,
- N_uint32 id,
- void _FAR_ *funcs)
-{
- return __GA_exports.GA_queryFunctions(dc,id,funcs);
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI REF2D_queryFunctions(
- REF2D_driver *ref2d,
- N_uint32 id,
- void _FAR_ *funcs)
-{
- return __GA_exports.REF2D_queryFunctions(ref2d,id,funcs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
- haveRDTSC = true;
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
- GA_largeInteger *value)
-{
- if (haveRDTSC)
- _GA_readTimeStamp(value);
- else
- DosTmrQueryTime((QWORD*)value);
-}
-
-/****************************************************************************
-REMARKS:
-On OS/2, we need special memory allocation functions if we build SDDPMI in
-test harness mode. But if we build GATest etc. in test mode, we want to use
-the normal C runtime functions, so route them back here.
-****************************************************************************/
-
-#if defined (TEST_HARNESS) && !defined (DEBUG_SDDPMI)
-
-/* Undefine these macros first or we'll recurse to hell! */
-#undef malloc
-#undef calloc
-#undef realloc
-#undef free
-
-void *SDDPMI_malloc(size_t size) {
- return malloc(size);
-}
-
-void *SDDPMI_calloc(size_t num, size_t size) {
- return calloc(num, size);
-}
-
-void SDDPMI_free(void *ptr) {
- free(ptr);
-}
-
-void *SDDPMI_realloc(void *ptr, size_t size) {
- return realloc(ptr, size);
-}
-
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/common/gaqnx.c b/board/MAI/bios_emulator/scitech/src/common/gaqnx.c
deleted file mode 100644
index 525d662869..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/gaqnx.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: QNX
-*
-* Description: OS specific Nucleus Graphics Architecture services for
-* the QNX operating system.
-*
-****************************************************************************/
-
-#include "nucleus/graphics.h"
-#include <time.h>
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static ibool haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-path - Local path to the Nucleus driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable.
-****************************************************************************/
-void NAPI GA_setLocalPath(
- const char *path)
-{
- PM_setLocalBPDPath(path);
-}
-
-/****************************************************************************
-RETURNS:
-Pointer to the system wide PM library imports, or the internal version if none
-
-REMARKS:
-In order to support deploying new Nucleus drivers that may require updated
-PM library functions, we check here to see if there is a system wide version
-of the PM functions available. If so we return those functions for use with
-the system wide Nucleus drivers, otherwise the compiled in version of the PM
-library is used with the application local version of Nucleus.
-****************************************************************************/
-PM_imports * NAPI GA_getSystemPMImports(void)
-{
- /* TODO: We may very well want to provide a system shared library */
- /* that eports the PM functions required by the Nucleus library */
- /* for QNX here. That will eliminate fatal errors loading new */
- /* drivers on QNX! */
- return &_PM_imports;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
- GA_exports *gaExp,
- ibool shared)
-{
- (void)gaExp;
- (void)shared;
- return false;
-}
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI GA_queryFunctions(
- GA_devCtx *dc,
- N_uint32 id,
- void _FAR_ *funcs)
-{
- return __GA_exports.GA_queryFunctions(dc,id,funcs);
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI REF2D_queryFunctions(
- REF2D_driver *ref2d,
- N_uint32 id,
- void _FAR_ *funcs)
-{
- return __GA_exports.REF2D_queryFunctions(ref2d,id,funcs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
- haveRDTSC = true;
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
- GA_largeInteger *value)
-{
- if (haveRDTSC)
- _GA_readTimeStamp(value);
- else {
- struct timespec ts;
-
- clock_gettime(CLOCK_REALTIME, &ts);
- value->low = (ts.tv_nsec / 1000 + ts.tv_sec * 1000000);
- value->high = 0;
- }
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/gartt.c b/board/MAI/bios_emulator/scitech/src/common/gartt.c
deleted file mode 100644
index 3a41f59c18..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/gartt.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: RTTarget-32
-*
-* Description: OS specific Nucleus Graphics Architecture services for
-* the RTTarget-32 operating system environments.
-*
-****************************************************************************/
-
-#include "nucleus/graphics.h"
-
-/*------------------------- Global Variables ------------------------------*/
-
-static ibool haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-path - Local path to the Nucleus driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable.
-****************************************************************************/
-void NAPI GA_setLocalPath(
- const char *path)
-{
- PM_setLocalBPDPath(path);
-}
-
-/****************************************************************************
-RETURNS:
-Pointer to the system wide PM library imports, or the internal version if none
-
-REMARKS:
-In order to support deploying new Nucleus drivers that may require updated
-PM library functions, we check here to see if there is a system wide version
-of the PM functions available. If so we return those functions for use with
-the system wide Nucleus drivers, otherwise the compiled in version of the PM
-library is used with the application local version of Nucleus.
-****************************************************************************/
-PM_imports * NAPI GA_getSystemPMImports(void)
-{
- return &_PM_imports;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
- GA_exports *gaExp,
- ibool shared)
-{
- (void)gaExp;
- (void)shared;
- return false;
-}
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI GA_queryFunctions(
- GA_devCtx *dc,
- N_uint32 id,
- void _FAR_ *funcs)
-{
- return __GA_exports.GA_queryFunctions(dc,id,funcs);
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI REF2D_queryFunctions(
- REF2D_driver *ref2d,
- N_uint32 id,
- void _FAR_ *funcs)
-{
- return __GA_exports.REF2D_queryFunctions(ref2d,id,funcs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0) {
- haveRDTSC = true;
- return true;
- }
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
- GA_largeInteger *value)
-{
- if (haveRDTSC)
- _GA_readTimeStamp(value);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/gasmx.c b/board/MAI/bios_emulator/scitech/src/common/gasmx.c
deleted file mode 100644
index ae31941f49..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/gasmx.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: smx32
-*
-* Description: OS specific Nucleus Graphics Architecture services for
-* the smx32 platform -- no vxD support.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "nucleus/graphics.h"
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-path - Local path to the Nucleus driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable.
-****************************************************************************/
-void NAPI GA_setLocalPath(
- const char *path)
-{
- PM_setLocalBPDPath(path);
-}
-
-/****************************************************************************
-RETURNS:
-Pointer to the system wide PM library imports, or the internal version if none
-
-REMARKS:
-In order to support deploying new Nucleus drivers that may require updated
-PM library functions, we check here to see if there is a system wide version
-of the PM functions available. If so we return those functions for use with
-the system wide Nucleus drivers, otherwise the compiled in version of the PM
-library is used with the application local version of Nucleus.
-****************************************************************************/
-PM_imports * NAPI GA_getSystemPMImports(void)
-{
- return &_PM_imports;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
- GA_exports *gaExp,
- ibool shared)
-{
- (void)gaExp;
- (void)shared;
- return false;
-}
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI GA_queryFunctions(
- GA_devCtx *dc,
- N_uint32 id,
- void _FAR_ *funcs)
-{
- return __GA_exports.GA_queryFunctions(dc,id,funcs);
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI REF2D_queryFunctions(
- REF2D_driver *ref2d,
- N_uint32 id,
- void _FAR_ *funcs)
-{
- return __GA_exports.REF2D_queryFunctions(ref2d,id,funcs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0)
- return true;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
- GA_largeInteger *value)
-{
- _GA_readTimeStamp(value);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/gavxd.c b/board/MAI/bios_emulator/scitech/src/common/gavxd.c
deleted file mode 100644
index fc8ba8d657..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/gavxd.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: Win32 VxD
-*
-* Description: OS specific Nucleus Graphics Architecture services for
-* the Win32 VxD's.
-*
-****************************************************************************/
-
-#include "sdd/sddhelp.h"
-
-/*------------------------- Global Variables ------------------------------*/
-
-static ibool haveRDTSC;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-path - Local path to the Nucleus driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable.
-****************************************************************************/
-void NAPI GA_setLocalPath(
- const char *path)
-{
- PM_setLocalBPDPath(path);
-}
-
-/****************************************************************************
-RETURNS:
-Pointer to the system wide PM library imports, or the internal version if none
-
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-PM_imports * NAPI GA_getSystemPMImports(void)
-{
- return &_PM_imports;
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
- GA_exports *gaExp,
- ibool shared)
-{
- (void)gaExp;
- (void)shared;
- return false;
-}
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI GA_queryFunctions(
- GA_devCtx *dc,
- N_uint32 id,
- void _FAR_ *funcs)
-{
- return __GA_exports.GA_queryFunctions(dc,id,funcs);
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI REF2D_queryFunctions(
- REF2D_driver *ref2d,
- N_uint32 id,
- void _FAR_ *funcs)
-{
- return __GA_exports.REF2D_queryFunctions(ref2d,id,funcs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0) {
- haveRDTSC = true;
- }
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
- GA_largeInteger *value)
-{
- if (haveRDTSC)
- _GA_readTimeStamp(value);
- else
- VTD_Get_Real_Time(&value->high,&value->low);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/gawin32.c b/board/MAI/bios_emulator/scitech/src/common/gawin32.c
deleted file mode 100644
index 69443344f4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/gawin32.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/****************************************************************************
-*
-* SciTech Nucleus Graphics Architecture
-*
-* Copyright (C) 1991-1998 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code contains proprietary technology |
-* |owned by SciTech Software, Inc., located at 505 Wall Street, |
-* |Chico, CA 95928 USA (http://www.scitechsoft.com). |
-* | |
-* |The contents of this file are subject to the SciTech Nucleus |
-* |License; you may *not* use this file or related software except in |
-* |compliance with the License. You may obtain a copy of the License |
-* |at http://www.scitechsoft.com/nucleus-license.txt |
-* | |
-* |Software distributed under the License is distributed on an |
-* |"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
-* |implied. See the License for the specific language governing |
-* |rights and limitations under the License. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: Win32
-*
-* Description: OS specific Nucleus Graphics Architecture services for
-* the Win32 operating system environments.
-*
-****************************************************************************/
-
-#include "pm_help.h"
-#include "pmapi.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#define STRICT
-#define WIN32_LEAN_AND_MEAN
-#include <windows.h>
-
-/*------------------------- Global Variables ------------------------------*/
-
-#define DLL_NAME "nga_w32.dll"
-
-extern HANDLE _PM_hDevice;
-static HMODULE hModDLL = NULL;
-static ibool useRing0Driver = false;
-static ibool haveRDTSC;
-static GA_largeInteger countFreq;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-REMARKS:
-Loads the shared "nga_w32.dll" library from disk and connects to it. This
-library is *always* located in the same directory as the Nucleus
-graphics.bpd file.
-****************************************************************************/
-static ibool LoadSharedDLL(void)
-{
- char filename[PM_MAX_PATH];
- char bpdpath[PM_MAX_PATH];
-
- /* Check if we have already loaded the DLL */
- if (hModDLL)
- return true;
- PM_init();
-
- /* Open the DLL file */
- if (!PM_findBPD(DLL_NAME,bpdpath))
- return false;
- strcpy(filename,bpdpath);
- strcat(filename,DLL_NAME);
- if ((hModDLL = LoadLibrary(filename)) == NULL)
- return false;
- return true;
-}
-
-/****************************************************************************
-PARAMETERS:
-path - Local path to the Nucleus driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable.
-
-Note that for Win32 we also call into the loaded PMHELP device driver
-as necessary to change the local Nucleus path for system wide Nucleus
-drivers.
-****************************************************************************/
-void NAPI GA_setLocalPath(
- const char *path)
-{
- DWORD inBuf[1];
- DWORD outBuf[1],outCnt;
-
- PM_setLocalBPDPath(path);
- if (_PM_hDevice != INVALID_HANDLE_VALUE) {
- inBuf[0] = (DWORD)path;
- DeviceIoControl(_PM_hDevice, PMHELP_GASETLOCALPATH32,
- inBuf, sizeof(inBuf), outBuf, sizeof(outBuf), &outCnt, NULL);
- }
-}
-
-/****************************************************************************
-RETURNS:
-Pointer to the system wide PM library imports, or the internal version if none
-
-REMARKS:
-In order to support deploying new Nucleus drivers that may require updated
-PM library functions, we check here to see if there is a system wide version
-of the PM functions available. If so we return those functions for use with
-the system wide Nucleus drivers, otherwise the compiled in version of the PM
-library is used with the application local version of Nucleus.
-****************************************************************************/
-PM_imports * NAPI GA_getSystemPMImports(void)
-{
- PM_imports * pmImp;
- PM_imports * (NAPIP _GA_getSystemPMImports)(void);
-
- if (LoadSharedDLL()) {
- /* Note that Visual C++ build DLL's with only a single underscore in front
- * of the exported name while Watcom C provides two of them. We check for
- * both to allow working with either compiled DLL.
- */
- if ((_GA_getSystemPMImports = (void*)GetProcAddress(hModDLL,"_GA_getSystemPMImports")) != NULL) {
- if ((_GA_getSystemPMImports = (void*)GetProcAddress(hModDLL,"__GA_getSystemPMImports")) != NULL) {
- pmImp = _GA_getSystemPMImports();
- memcpy(&_PM_imports,pmImp,MIN(_PM_imports.dwSize,pmImp->dwSize));
- return pmImp;
- }
- }
- }
- return &_PM_imports;
-}
-
-/****************************************************************************
-PARAMETERS:
-gaExp - Place to store the exported functions
-shared - True if connecting to the shared, global Nucleus driver
-
-REMARKS:
-For Win32 if we are connecting to the shared, global Nucleus driver (loaded
-at ring 0) then we need to load a special nga_w32.dll library which contains
-thunks to call down into the Ring 0 device driver as necessary. If we are
-connecting to the application local Nucleus drivers (ie: Nucleus on DirectDraw
-emulation layer) then we do nothing here.
-****************************************************************************/
-ibool NAPI GA_getSharedExports(
- GA_exports *gaExp,
- ibool shared)
-{
- GA_exports * exp;
- GA_exports * (NAPIP _GA_getSystemGAExports)(void);
-
- useRing0Driver = false;
- if (shared) {
- if (!LoadSharedDLL())
- PM_fatalError("Unable to load " DLL_NAME "!");
- if ((_GA_getSystemGAExports = (void*)GetProcAddress(hModDLL,"_GA_getSystemGAExports")) == NULL)
- if ((_GA_getSystemGAExports = (void*)GetProcAddress(hModDLL,"__GA_getSystemGAExports")) == NULL)
- PM_fatalError("Unable to load " DLL_NAME "!");
- exp = _GA_getSystemGAExports();
- memcpy(gaExp,exp,MIN(gaExp->dwSize,exp->dwSize));
- useRing0Driver = true;
- return true;
- }
- return false;
-}
-
-#ifndef TEST_HARNESS
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI GA_queryFunctions(
- GA_devCtx *dc,
- N_uint32 id,
- void _FAR_ *funcs)
-{
- static ibool (NAPIP _GA_queryFunctions)(GA_devCtx *dc,N_uint32 id,void _FAR_ *funcs) = NULL;
-
- if (useRing0Driver) {
- /* Call the version in nga_w32.dll if it is loaded */
- if (!_GA_queryFunctions) {
- if ((_GA_queryFunctions = (void*)GetProcAddress(hModDLL,"_GA_queryFunctions")) == NULL)
- if ((_GA_queryFunctions = (void*)GetProcAddress(hModDLL,"__GA_queryFunctions")) == NULL)
- PM_fatalError("Unable to get exports from " DLL_NAME "!");
- }
- return _GA_queryFunctions(dc,id,funcs);
- }
- return __GA_exports.GA_queryFunctions(dc,id,funcs);
-}
-
-/****************************************************************************
-REMARKS:
-Nothing special for this OS
-****************************************************************************/
-ibool NAPI REF2D_queryFunctions(
- REF2D_driver *ref2d,
- N_uint32 id,
- void _FAR_ *funcs)
-{
- static ibool (NAPIP _REF2D_queryFunctions)(REF2D_driver *ref2d,N_uint32 id,void _FAR_ *funcs) = NULL;
-
- if (useRing0Driver) {
- /* Call the version in nga_w32.dll if it is loaded */
- if (!_REF2D_queryFunctions) {
- if ((_REF2D_queryFunctions = (void*)GetProcAddress(hModDLL,"_REF2D_queryFunctions")) == NULL)
- if ((_REF2D_queryFunctions = (void*)GetProcAddress(hModDLL,"__REF2D_queryFunctions")) == NULL)
- PM_fatalError("Unable to get exports from " DLL_NAME "!");
- }
- return _REF2D_queryFunctions(ref2d,id,funcs);
- }
- return __GA_exports.REF2D_queryFunctions(ref2d,id,funcs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function initialises the high precision timing functions for the
-Nucleus loader library.
-****************************************************************************/
-ibool NAPI GA_TimerInit(void)
-{
- if (_GA_haveCPUID() && (_GA_getCPUIDFeatures() & CPU_HaveRDTSC) != 0) {
- haveRDTSC = true;
- return true;
- }
- else if (QueryPerformanceFrequency((LARGE_INTEGER*)&countFreq)) {
- haveRDTSC = false;
- return true;
- }
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-This function reads the high resolution timer.
-****************************************************************************/
-void NAPI GA_TimerRead(
- GA_largeInteger *value)
-{
- if (haveRDTSC)
- _GA_readTimeStamp(value);
- else
- QueryPerformanceCounter((LARGE_INTEGER*)value);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/gtfcalc.c b/board/MAI/bios_emulator/scitech/src/common/gtfcalc.c
deleted file mode 100644
index 1d547e9abb..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/gtfcalc.c
+++ /dev/null
@@ -1,436 +0,0 @@
-/****************************************************************************
-*
-* VESA Generalized Timing Formula (GTF)
-* Version 1.1
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Developed by: SciTech Software, Inc.
-*
-* Language: ANSI C
-* Environment: Any.
-*
-* Description: C module for generating GTF compatible timings given a set
-* of input requirements. Translated from the original GTF
-* 1.14 spreadsheet definition.
-*
-* Compile with #define TESTING to build a command line test
-* program.
-*
-* NOTE: The code in here has been written for clarity and
-* to follow the original GTF spec as closely as
-* possible.
-*
-****************************************************************************/
-
-#include "gtf.h"
-#ifndef __WIN32_VXD__
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <ctype.h>
-#include <math.h>
-#endif
-
-/*------------------------- Global Variables ------------------------------*/
-
-static GTF_constants GC = {
- 1.8, /* Margin size as percentage of display */
- 8, /* Character cell granularity */
- 1, /* Minimum front porch in lines/chars */
- 3, /* Width of V sync in lines */
- 8, /* Width of H sync as percent of total */
- 550, /* Minimum vertical sync + back porch (us) */
- 600, /* Blanking formula gradient */
- 40, /* Blanking formula offset */
- 128, /* Blanking formula scaling factor */
- 20, /* Blanking formula scaling factor weight */
- };
-
-/*-------------------------- Implementation -------------------------------*/
-
-#ifdef __WIN32_VXD__
-/* These functions are not supported in a VxD, so we stub them out so this
- * module will at least compile. Calling the functions in here will do
- * something wierd!
- */
-double sqrt(double x)
-{ return x; }
-
-double floor(double x)
-{ return x; }
-
-double pow(double x,double y)
-{ return x*y; }
-#endif
-
-static double round(double v)
-{
- return floor(v + 0.5);
-}
-
-static void GetInternalConstants(GTF_constants *c)
-/****************************************************************************
-*
-* Function: GetInternalConstants
-* Parameters: c - Place to store the internal constants
-*
-* Description: Calculates the rounded, internal set of GTF constants.
-* These constants are different to the real GTF constants
-* that can be set up for the monitor. The calculations to
-* get these real constants are defined in the 'Work Area'
-* after the constants are defined in the Excel spreadsheet.
-*
-****************************************************************************/
-{
- c->margin = GC.margin;
- c->cellGran = round(GC.cellGran);
- c->minPorch = round(GC.minPorch);
- c->vSyncRqd = round(GC.vSyncRqd);
- c->hSync = GC.hSync;
- c->minVSyncBP = GC.minVSyncBP;
- if (GC.k == 0)
- c->k = 0.001;
- else
- c->k = GC.k;
- c->m = (c->k / 256) * GC.m;
- c->c = (GC.c - GC.j) * (c->k / 256) + GC.j;
- c->j = GC.j;
-}
-
-void GTF_calcTimings(double hPixels,double vLines,double freq,
- int type,ibool wantMargins,ibool wantInterlace,GTF_timings *t)
-/****************************************************************************
-*
-* Function: GTF_calcTimings
-* Parameters: hPixels - X resolution
-* vLines - Y resolution
-* freq - Frequency (Hz, KHz or MHz depending on type)
-* type - 1 - vertical, 2 - horizontal, 3 - dot clock
-* margins - True if margins should be generated
-* interlace - True if interlaced timings to be generated
-* t - Place to store the resulting timings
-*
-* Description: Calculates a set of GTF timing parameters given a specified
-* resolution and vertical frequency. The horizontal frequency
-* and dot clock will be automatically generated by this
-* routines.
-*
-* For interlaced modes the CRTC parameters are calculated for
-* a single field, so will be half what would be used in
-* a non-interlaced mode.
-*
-****************************************************************************/
-{
- double interlace,vFieldRate,hPeriod;
- double topMarginLines,botMarginLines;
- double leftMarginPixels,rightMarginPixels;
- double hPeriodEst,vSyncBP,vBackPorch;
- double vTotalLines,vFieldRateEst;
- double hTotalPixels,hTotalActivePixels,hBlankPixels;
- double idealDutyCycle,hSyncWidth,hSyncBP,hBackPorch;
- double idealHPeriod;
- double vFreq,hFreq,dotClock;
- GTF_constants c;
-
- /* Get rounded GTF constants used for internal calculations */
- GetInternalConstants(&c);
-
- /* Move input parameters into appropriate variables */
- vFreq = hFreq = dotClock = freq;
-
- /* Round pixels to character cell granularity */
- hPixels = round(hPixels / c.cellGran) * c.cellGran;
-
- /* For interlaced mode halve the vertical parameters, and double
- * the required field refresh rate.
- */
- vFieldRate = vFreq;
- interlace = 0;
- if (wantInterlace)
- dotClock *= 2;
-
- /* Determine the lines for margins */
- if (wantMargins) {
- topMarginLines = round(c.margin / 100 * vLines);
- botMarginLines = round(c.margin / 100 * vLines);
- }
- else {
- topMarginLines = 0;
- botMarginLines = 0;
- }
-
- if (type != GTF_lockPF) {
- if (type == GTF_lockVF) {
- /* Estimate the horizontal period */
- hPeriodEst = ((1/vFieldRate) - (c.minVSyncBP/1000000)) /
- (vLines + (2*topMarginLines) + c.minPorch + interlace) * 1000000;
-
- /* Find the number of lines in vSync + back porch */
- vSyncBP = round(c.minVSyncBP / hPeriodEst);
- }
- else if (type == GTF_lockHF) {
- /* Find the number of lines in vSync + back porch */
- vSyncBP = round((c.minVSyncBP * hFreq) / 1000);
- }
-
- /* Find the number of lines in the V back porch alone */
- vBackPorch = vSyncBP - c.vSyncRqd;
-
- /* Find the total number of lines in the vertical period */
- vTotalLines = vLines + topMarginLines + botMarginLines + vSyncBP
- + interlace + c.minPorch;
-
- if (type == GTF_lockVF) {
- /* Estimate the vertical frequency */
- vFieldRateEst = 1000000 / (hPeriodEst * vTotalLines);
-
- /* Find the actual horizontal period */
- hPeriod = (hPeriodEst * vFieldRateEst) / vFieldRate;
-
- /* Find the actual vertical field frequency */
- vFieldRate = 1000000 / (hPeriod * vTotalLines);
- }
- else if (type == GTF_lockHF) {
- /* Find the actual vertical field frequency */
- vFieldRate = (hFreq / vTotalLines) * 1000;
- }
- }
-
- /* Find the number of pixels in the left and right margins */
- if (wantMargins) {
- leftMarginPixels = round(hPixels * c.margin) / (100 * c.cellGran);
- rightMarginPixels = round(hPixels * c.margin) / (100 * c.cellGran);
- }
- else {
- leftMarginPixels = 0;
- rightMarginPixels = 0;
- }
-
- /* Find the total number of active pixels in image + margins */
- hTotalActivePixels = hPixels + leftMarginPixels + rightMarginPixels;
-
- if (type == GTF_lockVF) {
- /* Find the ideal blanking duty cycle */
- idealDutyCycle = c.c - ((c.m * hPeriod) / 1000);
- }
- else if (type == GTF_lockHF) {
- /* Find the ideal blanking duty cycle */
- idealDutyCycle = c.c - (c.m / hFreq);
- }
- else if (type == GTF_lockPF) {
- /* Find ideal horizontal period from blanking duty cycle formula */
- idealHPeriod = (((c.c - 100) + (sqrt((pow(100-c.c,2)) +
- (0.4 * c.m * (hTotalActivePixels + rightMarginPixels +
- leftMarginPixels) / dotClock)))) / (2 * c.m)) * 1000;
-
- /* Find the ideal blanking duty cycle */
- idealDutyCycle = c.c - ((c.m * idealHPeriod) / 1000);
- }
-
- /* Find the number of pixels in blanking time */
- hBlankPixels = round((hTotalActivePixels * idealDutyCycle) /
- ((100 - idealDutyCycle) * c.cellGran)) * c.cellGran;
-
- /* Find the total number of pixels */
- hTotalPixels = hTotalActivePixels + hBlankPixels;
-
- /* Find the horizontal back porch */
- hBackPorch = round((hBlankPixels / 2) / c.cellGran) * c.cellGran;
-
- /* Find the horizontal sync width */
- hSyncWidth = round(((c.hSync/100) * hTotalPixels) / c.cellGran) * c.cellGran;
-
- /* Find the horizontal sync + back porch */
- hSyncBP = hBackPorch + hSyncWidth;
-
- if (type == GTF_lockPF) {
- /* Find the horizontal frequency */
- hFreq = (dotClock / hTotalPixels) * 1000;
-
- /* Find the number of lines in vSync + back porch */
- vSyncBP = round((c.minVSyncBP * hFreq) / 1000);
-
- /* Find the number of lines in the V back porch alone */
- vBackPorch = vSyncBP - c.vSyncRqd;
-
- /* Find the total number of lines in the vertical period */
- vTotalLines = vLines + topMarginLines + botMarginLines + vSyncBP
- + interlace + c.minPorch;
-
- /* Find the actual vertical field frequency */
- vFieldRate = (hFreq / vTotalLines) * 1000;
- }
- else {
- if (type == GTF_lockVF) {
- /* Find the horizontal frequency */
- hFreq = 1000 / hPeriod;
- }
- else if (type == GTF_lockHF) {
- /* Find the horizontal frequency */
- hPeriod = 1000 / hFreq;
- }
-
- /* Find the pixel clock frequency */
- dotClock = hTotalPixels / hPeriod;
- }
-
- /* Return the computed frequencies */
- t->vFreq = vFieldRate;
- t->hFreq = hFreq;
- t->dotClock = dotClock;
-
- /* Determine the vertical timing parameters */
- t->h.hTotal = (int)hTotalPixels;
- t->h.hDisp = (int)hTotalActivePixels;
- t->h.hSyncStart = t->h.hTotal - (int)hSyncBP;
- t->h.hSyncEnd = t->h.hTotal - (int)hBackPorch;
- t->h.hFrontPorch = t->h.hSyncStart - t->h.hDisp;
- t->h.hSyncWidth = (int)hSyncWidth;
- t->h.hBackPorch = (int)hBackPorch;
-
- /* Determine the vertical timing parameters */
- t->v.vTotal = (int)vTotalLines;
- t->v.vDisp = (int)vLines;
- t->v.vSyncStart = t->v.vTotal - (int)vSyncBP;
- t->v.vSyncEnd = t->v.vTotal - (int)vBackPorch;
- t->v.vFrontPorch = t->v.vSyncStart - t->v.vDisp;
- t->v.vSyncWidth = (int)c.vSyncRqd;
- t->v.vBackPorch = (int)vBackPorch;
- if (wantInterlace) {
- /* Halve the timings for interlaced modes */
- t->v.vTotal /= 2;
- t->v.vDisp /= 2;
- t->v.vSyncStart /= 2;
- t->v.vSyncEnd /= 2;
- t->v.vFrontPorch /= 2;
- t->v.vSyncWidth /= 2;
- t->v.vBackPorch /= 2;
- t->dotClock /= 2;
- }
-
- /* Mark as GTF timing using the sync polarities */
- t->interlace = (wantInterlace) ? 'I' : 'N';
- t->hSyncPol = '-';
- t->vSyncPol = '+';
-}
-
-void GTF_getConstants(GTF_constants *constants)
-{ *constants = GC; }
-
-void GTF_setConstants(GTF_constants *constants)
-{ GC = *constants; }
-
-#ifdef TESTING_GTF
-
-void main(int argc,char *argv[])
-{
- FILE *f;
- double xPixels,yPixels,freq;
- ibool interlace;
- GTF_timings t;
-
- if (argc != 5 && argc != 6) {
- printf("Usage: GTFCALC <xPixels> <yPixels> <freq> [[Hz] [KHz] [MHz]] [I]\n");
- printf("\n");
- printf("where <xPixels> is the horizontal resolution of the mode, <yPixels> is the\n");
- printf("vertical resolution of the mode. The <freq> value will be the frequency to\n");
- printf("drive the calculations, and will be either the vertical frequency (in Hz)\n");
- printf("the horizontal frequency (in KHz) or the dot clock (in MHz). To generate\n");
- printf("timings for an interlaced mode, add 'I' to the end of the command line.\n");
- printf("\n");
- printf("For example to generate timings for 640x480 at 60Hz vertical:\n");
- printf("\n");
- printf(" GTFCALC 640 480 60 Hz\n");
- printf("\n");
- printf("For example to generate timings for 640x480 at 31.5KHz horizontal:\n");
- printf("\n");
- printf(" GTFCALC 640 480 31.5 KHz\n");
- printf("\n");
- printf("For example to generate timings for 640x480 with a 25.175Mhz dot clock:\n");
- printf("\n");
- printf(" GTFCALC 640 480 25.175 MHz\n");
- printf("\n");
- printf("GTFCALC will print a summary of the results found, and dump the CRTC\n");
- printf("values to the UVCONFIG.CRT file in the format used by SciTech Display Doctor.\n");
- exit(1);
- }
-
- /* Get values from command line */
- xPixels = atof(argv[1]);
- yPixels = atof(argv[2]);
- freq = atof(argv[3]);
- interlace = ((argc == 6) && (argv[5][0] == 'I'));
-
- /* Compute the CRTC timings */
- if (toupper(argv[4][0]) == 'H')
- GTF_calcTimings(xPixels,yPixels,freq,GTF_lockVF,false,interlace,&t);
- else if (toupper(argv[4][0]) == 'K')
- GTF_calcTimings(xPixels,yPixels,freq,GTF_lockHF,false,interlace,&t);
- else if (toupper(argv[4][0]) == 'M')
- GTF_calcTimings(xPixels,yPixels,freq,GTF_lockPF,false,interlace,&t);
- else {
- printf("Unknown command line!\n");
- exit(1);
- }
-
- /* Dump summary info to standard output */
- printf("CRTC values for %.0fx%.0f @ %.2f %s\n", xPixels, yPixels, freq, argv[4]);
- printf("\n");
- printf(" hTotal = %-4d vTotal = %-4d\n",
- t.h.hTotal, t.v.vTotal);
- printf(" hDisp = %-4d vDisp = %-4d\n",
- t.h.hDisp, t.v.vDisp);
- printf(" hSyncStart = %-4d vSyncStart = %-4d\n",
- t.h.hSyncStart, t.v.vSyncStart);
- printf(" hSyncEnd = %-4d vSyncEnd = %-4d\n",
- t.h.hSyncEnd, t.v.vSyncEnd);
- printf(" hFrontPorch = %-4d vFrontPorch = %-4d\n",
- t.h.hFrontPorch, t.v.vFrontPorch);
- printf(" hSyncWidth = %-4d vSyncWidth = %-4d\n",
- t.h.hSyncWidth, t.v.vSyncWidth);
- printf(" hBackPorch = %-4d vBackPorch = %-4d\n",
- t.h.hBackPorch, t.v.vBackPorch);
- printf("\n");
- printf(" Interlaced = %s\n", (t.interlace == 'I') ? "Yes" : "No");
- printf(" H sync pol = %c\n", t.hSyncPol);
- printf(" V sync pol = %c\n", t.vSyncPol);
- printf("\n");
- printf(" Vert freq = %.2f Hz\n", t.vFreq);
- printf(" Horiz freq = %.2f KHz\n", t.hFreq);
- printf(" Dot Clock = %.2f Mhz\n", t.dotClock);
-
- /* Dump to file in format used by SciTech Display Doctor */
- if ((f = fopen("UVCONFIG.CRT","w")) != NULL) {
- fprintf(f, "[%.0f %.0f]\n", xPixels, yPixels);
- fprintf(f, "%d %d %d %d '%c' %s\n",
- t.h.hTotal, t.h.hDisp,
- t.h.hSyncStart, t.h.hSyncEnd,
- t.hSyncPol, (t.interlace == 'I') ? "I" : "NI");
- fprintf(f, "%d %d %d %d '%c'\n",
- t.v.vTotal, t.v.vDisp,
- t.v.vSyncStart, t.v.vSyncEnd,
- t.vSyncPol);
- fprintf(f, "%.2f\n", t.dotClock);
- fclose(f);
- }
-}
-
-#endif /* TESTING */
diff --git a/board/MAI/bios_emulator/scitech/src/common/libcimp.c b/board/MAI/bios_emulator/scitech/src/common/libcimp.c
deleted file mode 100644
index ab73ad578c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/libcimp.c
+++ /dev/null
@@ -1,827 +0,0 @@
-/****************************************************************************
-*
-* SciTech MGL Graphics Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Module to implement a the OS specific side of the Binary
-* Portable DLL C runtime library. The functions in here
-* are imported into the Binary Portable DLL's to implement
-* OS specific services.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#if defined(__WIN32_VXD__) || defined(__NT_DRIVER__)
-#include "drvlib/peloader.h"
-#include "drvlib/attrib.h"
-#include "drvlib/libc/init.h"
-#define __BUILDING_PE_LOADER__
-#include "drvlib/libc/file.h"
-#if defined(__WIN32_VXD__)
-#include "vxdfile.h"
-#endif
-#else
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <malloc.h>
-#include <time.h>
-#include <signal.h>
-#include <fcntl.h>
-#if defined(__GNUC__) || defined(__UNIX__)
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#else
-#include <io.h>
-#endif
-#include "drvlib/attrib.h"
-#include "drvlib/libc/init.h"
-#define __BUILDING_PE_LOADER__
-#include "drvlib/libc/file.h"
-#if defined(__WINDOWS__) || defined(TNT) || defined(__RTTARGET__)
-#define WIN32_LEAN_AND_MEAN
-#define STRICT
-#include <windows.h>
-#endif
-#ifdef __MSDOS__
-#include <dos.h>
-#endif
-#ifdef __OS2__
-#define INCL_DOS
-#define INCL_DOSERRORS
-#define INCL_SUB
-#include <os2.h>
-#endif
-#endif
-
-/* No text or binary modes for Unix */
-
-#ifndef O_BINARY
-#define O_BINARY 0
-#define O_TEXT 0
-#endif
-
-/*--------------------------- Global variables ----------------------------*/
-
-#if defined(__WIN32_VXD__) || defined(__NT_DRIVER__)
-#define MAX_FILES 16
-static FILE *openHandles[MAX_FILES] = {NULL};
-#endif
-
-/* <stdlib.h> stub functions */
-void _CDECL stub_abort(void);
-int _CDECL stub_atexit(void (*)(void));
-void * _CDECL stub_calloc(size_t _nelem, size_t _size);
-void _CDECL stub_exit(int _status);
-void _CDECL stub_free(void *_ptr);
-char * _CDECL stub_getenv(const char *_name);
-void * _CDECL stub_malloc(size_t _size);
-void * _CDECL stub_realloc(void *_ptr, size_t _size);
-int _CDECL stub_system(const char *_s);
-int _CDECL stub_putenv(const char *_val);
-
-/* <libc/file.h> stub functions */
-int _CDECL stub_open(const char *_path, int _oflag, unsigned _mode);
-int _CDECL stub_access(const char *_path, int _amode);
-int _CDECL stub_close(int _fildes);
-off_t _CDECL stub_lseek(int _fildes, off_t _offset, int _whence);
-size_t _CDECL stub_read(int _fildes, void *_buf, size_t _nbyte);
-int _CDECL stub_unlink(const char *_path);
-size_t _CDECL stub_write(int _fildes, const void *_buf, size_t _nbyte);
-int _CDECL stub_isatty(int _fildes);
-
-/* <stdio.h> stub functions */
-int _CDECL stub_remove(const char *_filename);
-int _CDECL stub_rename(const char *_old, const char *_new);
-
-/* <time.h> stub functions */
-time_t _CDECL stub_time(time_t *_tod);
-
-/* <signal.h> stub functions */
-int _CDECL stub_raise(int);
-void * _CDECL stub_signal(int, void *);
-
-/* <drvlib/attrib.h> functions */
-#define stub_OS_setfileattr _OS_setfileattr
-#define stub_OS_getcurrentdate _OS_getcurrentdate
-
-LIBC_imports _VARAPI ___imports = {
- sizeof(LIBC_imports),
-
- /* <stdlib.h> exports */
- stub_abort,
- stub_atexit,
- stub_calloc,
- stub_exit,
- stub_free,
- stub_getenv,
- stub_malloc,
- stub_realloc,
- stub_system,
- stub_putenv,
-
- /* <libc/file.h> exports */
- stub_open,
- stub_access,
- stub_close,
- stub_lseek,
- stub_read,
- stub_unlink,
- stub_write,
- stub_isatty,
-
- /* <stdio.h> exports */
- stub_remove,
- stub_rename,
-
- /* <signal.h> functions */
- stub_raise,
- stub_signal,
-
- /* <time.h> exports */
- stub_time,
-
- /* <drvlib/attrib.h> exports */
- stub_OS_setfileattr,
- stub_OS_getcurrentdate,
- };
-
-/*---------------------- Stub function implementation ---------------------*/
-
-/* <stdlib.h> stub functions */
-void _CDECL stub_abort(void)
-{
-#if !defined( __WIN32_VXD__) && !defined(__NT_DRIVER__)
- abort();
-#endif
-}
-
-int _CDECL stub_atexit(void (*func)(void))
-{
-#if !defined( __WIN32_VXD__) && !defined(__NT_DRIVER__)
- return atexit((void(*)(void))func);
-#else
- return -1;
-#endif
-}
-
-void * _CDECL stub_calloc(size_t _nelem, size_t _size)
-{ return __PM_calloc(_nelem,_size); }
-
-void _CDECL stub_exit(int _status)
-{
-#if !defined( __WIN32_VXD__) && !defined(__NT_DRIVER__)
- exit(_status);
-#endif
-}
-
-void _CDECL stub_free(void *_ptr)
-{ __PM_free(_ptr); }
-
-char * _CDECL stub_getenv(const char *_name)
-{
-#if defined( __WIN32_VXD__) || defined(__NT_DRIVER__)
- return NULL;
-#else
- return getenv(_name);
-#endif
-}
-
-void * _CDECL stub_malloc(size_t _size)
-{ return __PM_malloc(_size); }
-
-void * _CDECL stub_realloc(void *_ptr, size_t _size)
-{ return __PM_realloc(_ptr,_size); }
-
-int _CDECL stub_system(const char *_s)
-{
-#if defined(__WINDOWS__) || defined(__WIN32_VXD__) || defined(__NT_DRIVER__) || defined(__SMX32__) || defined(__RTTARGET__)
- (void)_s;
- return -1;
-#else
- return system(_s);
-#endif
-}
-
-int _CDECL stub_putenv(const char *_val)
-{
-#if defined( __WIN32_VXD__) || defined(__NT_DRIVER__)
- return -1;
-#else
- return putenv((char*)_val);
-#endif
-}
-
-time_t _CDECL stub_time(time_t *_tod)
-{
-#if defined( __WIN32_VXD__) || defined(__NT_DRIVER__)
- return 0;
-#else
- return time(_tod);
-#endif
-}
-
-#if defined(__MSDOS__)
-
-#if defined(TNT) && defined(_MSC_VER)
-
-void _CDECL _OS_setfileattr(const char *filename,unsigned attrib)
-{ SetFileAttributes((LPSTR)filename, (DWORD)attrib); }
-
-#else
-
-void _CDECL _OS_setfileattr(const char *filename,unsigned attrib)
-{ _dos_setfileattr(filename,attrib); }
-
-#endif
-
-#elif defined(__WIN32_VXD__)
-
-#define USE_LOCAL_FILEIO
-#define USE_LOCAL_GETDATE
-
-/* <libc/file.h> stub functions */
-int _CDECL stub_open(const char *_path, int _oflag, unsigned _mode)
-{
- char mode[10];
- int i;
-
- /* Find an empty file handle to use */
- for (i = 3; i < MAX_FILES; i++) {
- if (!openHandles[i])
- break;
- }
- if (openHandles[i])
- return -1;
-
- /* Find the open flags to use */
- if (_oflag & ___O_TRUNC)
- strcpy(mode,"w");
- else if (_oflag & ___O_CREAT)
- strcpy(mode,"a");
- else
- strcpy(mode,"r");
- if (_oflag & ___O_BINARY)
- strcat(mode,"b");
- if (_oflag & ___O_TEXT)
- strcat(mode,"t");
-
- /* Open the file and store the file handle */
- if ((openHandles[i] = fopen(_path,mode)) == NULL)
- return -1;
- return i;
-}
-
-int _CDECL stub_access(const char *_path, int _amode)
-{ return -1; }
-
-int _CDECL stub_close(int _fildes)
-{
- if (_fildes >= 3 && openHandles[_fildes]) {
- fclose(openHandles[_fildes]);
- openHandles[_fildes] = NULL;
- }
- return 0;
-}
-
-off_t _CDECL stub_lseek(int _fildes, off_t _offset, int _whence)
-{
- if (_fildes >= 3) {
- fseek(openHandles[_fildes],_offset,_whence);
- return ftell(openHandles[_fildes]);
- }
- return 0;
-}
-
-size_t _CDECL stub_read(int _fildes, void *_buf, size_t _nbyte)
-{
- if (_fildes >= 3)
- return fread(_buf,1,_nbyte,openHandles[_fildes]);
- return 0;
-}
-
-int _CDECL stub_unlink(const char *_path)
-{
- WORD error;
-
- if (initComplete) {
- if (R0_DeleteFile((char*)_path,0,&error))
- return 0;
- return -1;
- }
- else
- return i_remove(_path);
-}
-
-size_t _CDECL stub_write(int _fildes, const void *_buf, size_t _nbyte)
-{
- if (_fildes >= 3)
- return fwrite(_buf,1,_nbyte,openHandles[_fildes]);
- return _nbyte;
-}
-
-int _CDECL stub_isatty(int _fildes)
-{ return 0; }
-
-/* <stdio.h> stub functions */
-int _CDECL stub_remove(const char *_filename)
-{ return stub_unlink(_filename); }
-
-int _CDECL stub_rename(const char *_old, const char *_new)
-{ return -1; }
-
-void _CDECL _OS_setfileattr(const char *filename,unsigned attrib)
-{
- WORD error;
- if (initComplete)
- R0_SetFileAttributes((char*)filename,attrib,&error);
-}
-
-/* Return the current date in days since 1/1/1980 */
-ulong _CDECL _OS_getcurrentdate(void)
-{
- DWORD date;
- VTD_Get_Date_And_Time(&date);
- return date;
-}
-
-#elif defined(__NT_DRIVER__)
-
-#define USE_LOCAL_FILEIO
-#define USE_LOCAL_GETDATE
-
-/* <libc/file.h> stub functions */
-int _CDECL stub_open(const char *_path, int _oflag, unsigned _mode)
-{
- char mode[10];
- int i;
-
- /* Find an empty file handle to use */
- for (i = 3; i < MAX_FILES; i++) {
- if (!openHandles[i])
- break;
- }
- if (openHandles[i])
- return -1;
-
- /* Find the open flags to use */
- if (_oflag & ___O_TRUNC)
- strcpy(mode,"w");
- else if (_oflag & ___O_CREAT)
- strcpy(mode,"a");
- else
- strcpy(mode,"r");
- if (_oflag & ___O_BINARY)
- strcat(mode,"b");
- if (_oflag & ___O_TEXT)
- strcat(mode,"t");
-
- /* Open the file and store the file handle */
- if ((openHandles[i] = fopen(_path,mode)) == NULL)
- return -1;
- return i;
-}
-
-int _CDECL stub_close(int _fildes)
-{
- if (_fildes >= 3 && openHandles[_fildes]) {
- fclose(openHandles[_fildes]);
- openHandles[_fildes] = NULL;
- }
- return 0;
-}
-
-off_t _CDECL stub_lseek(int _fildes, off_t _offset, int _whence)
-{
- if (_fildes >= 3) {
- fseek(openHandles[_fildes],_offset,_whence);
- return ftell(openHandles[_fildes]);
- }
- return 0;
-}
-
-size_t _CDECL stub_read(int _fildes, void *_buf, size_t _nbyte)
-{
- if (_fildes >= 3)
- return fread(_buf,1,_nbyte,openHandles[_fildes]);
- return 0;
-}
-
-size_t _CDECL stub_write(int _fildes, const void *_buf, size_t _nbyte)
-{
- if (_fildes >= 3)
- return fwrite(_buf,1,_nbyte,openHandles[_fildes]);
- return _nbyte;
-}
-
-int _CDECL stub_access(const char *_path, int _amode)
-{ return -1; }
-
-int _CDECL stub_isatty(int _fildes)
-{ return 0; }
-
-int _CDECL stub_unlink(const char *_path)
-{
- /* TODO: Implement this! */
- return -1;
-}
-
-/* <stdio.h> stub functions */
-int _CDECL stub_remove(const char *_filename)
-{ return stub_unlink(_filename); }
-
-int _CDECL stub_rename(const char *_old, const char *_new)
-{
- /* TODO: Implement this! */
- return -1;
-}
-
-void _CDECL _OS_setfileattr(const char *filename,unsigned attrib)
-{
- uint _attr = 0;
- if (attrib & __A_RDONLY)
- _attr |= FILE_ATTRIBUTE_READONLY;
- if (attrib & __A_HIDDEN)
- _attr |= FILE_ATTRIBUTE_HIDDEN;
- if (attrib & __A_SYSTEM)
- _attr |= FILE_ATTRIBUTE_SYSTEM;
- PM_setFileAttr(filename,_attr);
-}
-
-/* Return the current date in days since 1/1/1980 */
-ulong _CDECL _OS_getcurrentdate(void)
-{
- TIME_FIELDS tm;
- _int64 count,count_1_1_1980;
-
- tm.Year = 1980;
- tm.Month = 1;
- tm.Day = 1;
- tm.Hour = 0;
- tm.Minute = 0;
- tm.Second = 0;
- tm.Milliseconds = 0;
- tm.Weekday = 0;
- RtlTimeFieldsToTime(&tm,(PLARGE_INTEGER)&count_1_1_1980);
- KeQuerySystemTime((PLARGE_INTEGER)&count);
- return (ulong)( (count - count_1_1_1980) / ((_int64)24 * (_int64)3600 * (_int64)10000000) );
-}
-
-#elif defined(__WINDOWS32__) || defined(__RTTARGET__)
-
-void _CDECL _OS_setfileattr(const char *filename,unsigned attrib)
-{ SetFileAttributes((LPSTR)filename, (DWORD)attrib); }
-
-#elif defined(__OS2__)
-
-#define USE_LOCAL_FILEIO
-
-#ifndef W_OK
-#define W_OK 0x02
-#endif
-
-void _CDECL _OS_setfileattr(const char *filename,unsigned attrib)
-{
- FILESTATUS3 s;
- if (DosQueryPathInfo((PSZ)filename,FIL_STANDARD,(PVOID)&s,sizeof(s)))
- return;
- s.attrFile = attrib;
- DosSetPathInfo((PSZ)filename,FIL_STANDARD,(PVOID)&s,sizeof(s),0L);
-}
-
-/* <libc/file.h> stub functions */
-
-#define BUF_SIZE 4096
-
-/* Note: the implementation of the standard Unix-ish handle-based I/O isn't
- * complete - but that wasn't the intent either. Note also that we
- * don't presently support text file I/O, so all text files end
- * up in Unix format (and are not translated!).
- */
-int _CDECL stub_open(const char *_path, int _oflag, unsigned _mode)
-{
- HFILE handle;
- ULONG error, actiontaken, openflag, openmode;
- char path[PM_MAX_PATH];
-
- /* Determine open flags */
- if (_oflag & ___O_CREAT) {
- if (_oflag & ___O_EXCL)
- openflag = OPEN_ACTION_FAIL_IF_EXISTS | OPEN_ACTION_CREATE_IF_NEW;
- else if (_oflag & ___O_TRUNC)
- openflag = OPEN_ACTION_REPLACE_IF_EXISTS | OPEN_ACTION_CREATE_IF_NEW;
- else
- openflag = OPEN_ACTION_OPEN_IF_EXISTS | OPEN_ACTION_CREATE_IF_NEW;
- }
- else if (_oflag & ___O_TRUNC)
- openflag = OPEN_ACTION_REPLACE_IF_EXISTS;
- else
- openflag = OPEN_ACTION_OPEN_IF_EXISTS;
-
- /* Determine open mode flags */
- if (_oflag & ___O_RDONLY)
- openmode = OPEN_ACCESS_READONLY | OPEN_SHARE_DENYNONE;
- else if (_oflag & ___O_WRONLY)
- openmode = OPEN_ACCESS_WRITEONLY | OPEN_SHARE_DENYWRITE;
- else
- openmode = OPEN_ACCESS_READWRITE | OPEN_SHARE_DENYWRITE;
-
- /* Copy the path to a variable on the stack. We need to do this
- * for OS/2 as when the drivers are loaded into shared kernel
- * memory, we can't pass an address from that memory range to
- * this function.
- */
- strcpy(path,_path);
- if (DosOpen(path, &handle, &actiontaken, 0, FILE_NORMAL,
- openflag, openmode, NULL) != NO_ERROR)
- return -1;
-
- /* Handle append mode of operation */
- if (_oflag & ___O_APPEND) {
- if (DosSetFilePtr(handle, 0, FILE_END, &error) != NO_ERROR)
- return -1;
- }
- return handle;
-}
-
-int _CDECL stub_access(const char *_path, int _amode)
-{
- char path[PM_MAX_PATH];
- FILESTATUS fs;
-
- /* Copy the path to a variable on the stack. We need to do this
- * for OS/2 as when the drivers are loaded into shared kernel
- * memory, we can't pass an address from that memory range to
- * this function.
- */
- strcpy(path,_path);
- if (DosQueryPathInfo(path, FIL_STANDARD, &fs, sizeof(fs)) != NO_ERROR)
- return -1;
- if ((_amode & W_OK) && (fs.attrFile & FILE_READONLY))
- return -1;
- return 0;
-}
-
-int _CDECL stub_close(int _fildes)
-{
- if (DosClose(_fildes) != NO_ERROR)
- return -1;
- return 0;
-}
-
-off_t _CDECL stub_lseek(int _fildes, off_t _offset, int _whence)
-{
- ULONG cbActual, origin;
-
- switch (_whence) {
- case SEEK_CUR:
- origin = FILE_CURRENT;
- break;
- case SEEK_END:
- origin = FILE_END;
- break;
- default:
- origin = FILE_BEGIN;
- }
- if (DosSetFilePtr(_fildes, _offset, origin, &cbActual) != NO_ERROR)
- return -1;
- return cbActual;
-}
-
-size_t _CDECL stub_read(int _fildes, void *_buf, size_t _nbyte)
-{
- ULONG cbActual = 0,cbRead;
- uchar *p = _buf;
- uchar file_io_buf[BUF_SIZE];
-
- /* We need to perform the physical read in chunks into a
- * a temporary static buffer, since the buffer passed in may be
- * in kernel space and will cause DosRead to bail internally.
- */
- while (_nbyte > BUF_SIZE) {
- if (DosRead(_fildes, file_io_buf, BUF_SIZE, &cbRead) != NO_ERROR)
- return -1;
- cbActual += cbRead;
- memcpy(p,file_io_buf,BUF_SIZE);
- p += BUF_SIZE;
- _nbyte -= BUF_SIZE;
- }
- if (_nbyte) {
- if (DosRead(_fildes, file_io_buf, _nbyte, &cbRead) != NO_ERROR)
- return -1;
- cbActual += cbRead;
- memcpy(p,file_io_buf,_nbyte);
- }
- return cbActual;
-}
-
-size_t _CDECL stub_write(int _fildes, const void *_buf, size_t _nbyte)
-{
- ULONG cbActual = 0,cbWrite;
- uchar *p = (PVOID)_buf;
- uchar file_io_buf[BUF_SIZE];
-
- /* We need to perform the physical write in chunks from a
- * a temporary static buffer, since the buffer passed in may be
- * in kernel space and will cause DosWrite to bail internally.
- */
- while (_nbyte > BUF_SIZE) {
- memcpy(file_io_buf,p,BUF_SIZE);
- if (DosWrite(_fildes, file_io_buf, BUF_SIZE, &cbWrite) != NO_ERROR)
- return -1;
- cbActual += cbWrite;
- p += BUF_SIZE;
- _nbyte -= BUF_SIZE;
- }
- if (_nbyte) {
- memcpy(file_io_buf,p,_nbyte);
- if (DosWrite(_fildes, file_io_buf, _nbyte, &cbWrite) != NO_ERROR)
- return -1;
- cbActual += cbWrite;
- }
- return cbActual;
-}
-
-int _CDECL stub_unlink(const char *_path)
-{
- char path[PM_MAX_PATH];
-
- /* Copy the path to a variable on the stack. We need to do this
- * for OS/2 as when the drivers are loaded into shared kernel
- * memory, we can't pass an address from that memory range to
- * this function.
- */
- strcpy(path,_path);
- if (DosDelete(path) != NO_ERROR)
- return -1;
- return 0;
-}
-
-int _CDECL stub_isatty(int _fildes)
-{
- ULONG htype, flags;
-
- if (DosQueryHType(_fildes, &htype, &flags) != NO_ERROR)
- return 0;
- return ((htype & 0xFF) == HANDTYPE_DEVICE);
-}
-
-/* <stdio.h> stub functions */
-int _CDECL stub_remove(const char *_path)
-{
- char path[PM_MAX_PATH];
-
- /* Copy the path to a variable on the stack. We need to do this
- * for OS/2 as when the drivers are loaded into shared kernel
- * memory, we can't pass an address from that memory range to
- * this function.
- */
- strcpy(path,_path);
- if (DosDelete(path) != NO_ERROR)
- return -1;
- return 0;
-}
-
-int _CDECL stub_rename(const char *_old, const char *_new)
-{
- char old[PM_MAX_PATH];
- char new[PM_MAX_PATH];
-
- /* Copy the path to a variable on the stack. We need to do this
- * for OS/2 as when the drivers are loaded into shared kernel
- * memory, we can't pass an address from that memory range to
- * this function.
- */
- strcpy(old,_old);
- strcpy(new,_new);
- if (DosMove(old, new) != NO_ERROR)
- return -1;
- return 0;
-}
-
-#else
-
-void _CDECL _OS_setfileattr(const char *filename,unsigned attrib)
-{ /* Unable to set hidden, system attributes on Unix. */ }
-
-#endif
-
-#ifndef USE_LOCAL_FILEIO
-
-/* <libc/file.h> stub functions */
-int _CDECL stub_open(const char *_path, int _oflag, unsigned _mode)
-{
- int oflag_tab[] = {
- ___O_RDONLY, O_RDONLY,
- ___O_WRONLY, O_WRONLY,
- ___O_RDWR, O_RDWR,
- ___O_BINARY, O_BINARY,
- ___O_TEXT, O_TEXT,
- ___O_CREAT, O_CREAT,
- ___O_EXCL, O_EXCL,
- ___O_TRUNC, O_TRUNC,
- ___O_APPEND, O_APPEND,
- };
- int i,oflag = 0;
-
- /* Translate the oflag's to the OS dependent versions */
- for (i = 0; i < sizeof(oflag_tab) / sizeof(int); i += 2) {
- if (_oflag & oflag_tab[i])
- oflag |= oflag_tab[i+1];
- }
- return open(_path,oflag,_mode);
-}
-
-int _CDECL stub_access(const char *_path, int _amode)
-{ return access(_path,_amode); }
-
-int _CDECL stub_close(int _fildes)
-{ return close(_fildes); }
-
-off_t _CDECL stub_lseek(int _fildes, off_t _offset, int _whence)
-{ return lseek(_fildes,_offset,_whence); }
-
-size_t _CDECL stub_read(int _fildes, void *_buf, size_t _nbyte)
-{ return read(_fildes,_buf,_nbyte); }
-
-int _CDECL stub_unlink(const char *_path)
-{ return unlink(_path); }
-
-size_t _CDECL stub_write(int _fildes, const void *_buf, size_t _nbyte)
-{ return write(_fildes,_buf,_nbyte); }
-
-int _CDECL stub_isatty(int _fildes)
-{ return isatty(_fildes); }
-
-/* <stdio.h> stub functions */
-int _CDECL stub_remove(const char *_filename)
-{ return remove(_filename); }
-
-int _CDECL stub_rename(const char *_old, const char *_new)
-{ return rename(_old,_new); }
-
-#endif
-
-#ifndef USE_LOCAL_GETDATE
-
-/* Return the current date in days since 1/1/1980 */
-ulong _CDECL _OS_getcurrentdate(void)
-{
- struct tm refTime;
- refTime.tm_year = 80;
- refTime.tm_mon = 0;
- refTime.tm_mday = 1;
- refTime.tm_hour = 0;
- refTime.tm_min = 0;
- refTime.tm_sec = 0;
- refTime.tm_isdst = -1;
- return (time(NULL) - mktime(&refTime)) / (24 * 3600L);
-}
-
-#endif
-
-int _CDECL stub_raise(int sig)
-{
-#if defined(__WIN32_VXD__) || defined(__NT_DRIVER__) || defined(__SMX32__)
- return -1;
-#else
- return raise(sig);
-#endif
-}
-
-#ifdef __WINDOWS32__
-typedef void (*__code_ptr)(int);
-#else
-typedef void (*__code_ptr)();
-#endif
-
-void * _CDECL stub_signal(int sig, void *handler)
-{
-#if defined(__WIN32_VXD__) || defined(__NT_DRIVER__) || defined(__SMX32__)
- return NULL;
-#else
- return (void*)signal(sig,(__code_ptr)handler);
-#endif
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/makefile b/board/MAI/bios_emulator/scitech/src/common/makefile
deleted file mode 100644
index 5aac0381b3..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#############################################################################
-#
-# Copyright (C) 1996 SciTech Software.
-# All rights reserved.
-#
-# Descripton: Makefile for UniVBE(tm), UniPOWER(tm), UVBELib(tm) and
-# DPMSLib library files. Requires Borland C++ 4.52 to build
-# some components.
-#
-# $Date: 2002/10/02 15:35:20 $ $Author: hfrieden $
-#
-#############################################################################
-
-CFLAGS += -DTESTING_GTF
-
-gtfcalc$E: gtfcalc$O
-
-.INCLUDE: "$(SCITECH)/makedefs/common.mk"
diff --git a/board/MAI/bios_emulator/scitech/src/common/peloader.c b/board/MAI/bios_emulator/scitech/src/common/peloader.c
deleted file mode 100644
index a134bb012f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/peloader.c
+++ /dev/null
@@ -1,586 +0,0 @@
-/****************************************************************************
-*
-* SciTech MGL Graphics Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Module to implement a simple Portable Binary DLL loader
-* library. This library can be used to load PE DLL's under
-* any Intel based OS, provided the DLL's do not have any
-* imports in the import table.
-*
-* NOTE: This loader module expects the DLL's to be built with
-* Watcom C++ and may produce unexpected results with
-* DLL's linked by another compiler.
-*
-****************************************************************************/
-
-#include "drvlib/peloader.h"
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "drvlib/libc/init.h"
-#if (defined(__WINDOWS32__) || defined(__DRIVER__)) && defined(CHECKED)
-#define WIN32_LEAN_AND_MEAN
-#define STRICT
-#include <windows.h>
-#endif
-#include "drvlib/pe.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-static int result = PE_ok;
-
-/*------------------------- Implementation --------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-f - Handle to open file to read driver from
-startOffset - Offset to the start of the driver within the file
-
-RETURNS:
-Handle to loaded PE DLL, or NULL on failure.
-
-REMARKS:
-This function loads a Portable Binary DLL library from disk, relocates
-the code and returns a handle to the loaded library. This function is the
-same as the regular PE_loadLibrary except that it take a handle to an
-open file and an offset within that file for the DLL to load.
-****************************************************************************/
-static int PE_readHeader(
- FILE *f,
- long startOffset,
- FILE_HDR *filehdr,
- OPTIONAL_HDR *opthdr)
-{
- EXE_HDR exehdr;
- ulong offset,signature;
-
- /* Read the EXE header and check for valid header signature */
- result = PE_invalidDLLImage;
- fseek(f, startOffset, SEEK_SET);
- if (fread(&exehdr, 1, sizeof(exehdr), f) != sizeof(exehdr))
- return false;
- if (exehdr.signature != 0x5A4D)
- return false;
-
- /* Now seek to the start of the PE header defined at offset 0x3C
- * in the MS-DOS EXE header, and read the signature and check it.
- */
- fseek(f, startOffset+0x3C, SEEK_SET);
- if (fread(&offset, 1, sizeof(offset), f) != sizeof(offset))
- return false;
- fseek(f, startOffset+offset, SEEK_SET);
- if (fread(&signature, 1, sizeof(signature), f) != sizeof(signature))
- return false;
- if (signature != 0x00004550)
- return false;
-
- /* Now read the PE file header and check that it is correct */
- if (fread(filehdr, 1, sizeof(*filehdr), f) != sizeof(*filehdr))
- return false;
- if (filehdr->Machine != IMAGE_FILE_MACHINE_I386)
- return false;
- if (!(filehdr->Characteristics & IMAGE_FILE_32BIT_MACHINE))
- return false;
- if (!(filehdr->Characteristics & IMAGE_FILE_DLL))
- return false;
- if (fread(opthdr, 1, sizeof(*opthdr), f) != sizeof(*opthdr))
- return false;
- if (opthdr->Magic != 0x10B)
- return false;
-
- /* Success, so return true! */
- return true;
-}
-
-/****************************************************************************
-PARAMETERS:
-f - Handle to open file to read driver from
-startOffset - Offset to the start of the driver within the file
-
-RETURNS:
-Size of the DLL file on disk, or -1 on error
-
-REMARKS:
-This function scans the headers for a Portable Binary DLL to determine the
-length of the DLL file on disk.
-{secret}
-****************************************************************************/
-ulong PEAPI PE_getFileSize(
- FILE *f,
- ulong startOffset)
-{
- FILE_HDR filehdr;
- OPTIONAL_HDR opthdr;
- SECTION_HDR secthdr;
- ulong size;
- int i;
-
- /* Read the PE file headers from disk */
- if (!PE_readHeader(f,startOffset,&filehdr,&opthdr))
- return 0xFFFFFFFF;
-
- /* Scan all the section headers summing up the total size */
- size = opthdr.SizeOfHeaders;
- for (i = 0; i < filehdr.NumberOfSections; i++) {
- if (fread(&secthdr, 1, sizeof(secthdr), f) != sizeof(secthdr))
- return 0xFFFFFFFF;
- size += secthdr.SizeOfRawData;
- }
- return size;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Loads a Portable Binary DLL into memory from an open file
-
-HEADER:
-peloader.h
-
-PARAMETERS:
-f - Handle to open file to read driver from
-startOffset - Offset to the start of the driver within the file
-size - Place to store the size of the driver loaded
-shared - True to load module into shared memory
-
-RETURNS:
-Handle to loaded PE DLL, or NULL on failure.
-
-REMARKS:
-This function loads a Portable Binary DLL library from disk, relocates
-the code and returns a handle to the loaded library. This function is the
-same as the regular PE_loadLibrary except that it take a handle to an
-open file and an offset within that file for the DLL to load.
-
-SEE ALSO:
-PE_loadLibrary, PE_getProcAddress, PE_freeLibrary
-****************************************************************************/
-PE_MODULE * PEAPI PE_loadLibraryExt(
- FILE *f,
- ulong startOffset,
- ulong *size,
- ibool shared)
-{
- FILE_HDR filehdr;
- OPTIONAL_HDR opthdr;
- SECTION_HDR secthdr;
- ulong offset,pageOffset;
- ulong text_off,text_addr,text_size;
- ulong data_off,data_addr,data_size,data_end;
- ulong export_off,export_addr,export_size,export_end;
- ulong reloc_off,reloc_size;
- ulong image_size;
- int i,delta,numFixups;
- ushort relocType,*fixup;
- PE_MODULE *hMod = NULL;
- void *reloc = NULL;
- BASE_RELOCATION *baseReloc;
- InitLibC_t InitLibC;
-
- /* Read the PE file headers from disk */
- if (!PE_readHeader(f,startOffset,&filehdr,&opthdr))
- return NULL;
-
- /* Scan all the section headers and find the necessary sections */
- text_off = data_off = reloc_off = export_off = 0;
- text_addr = text_size = 0;
- data_addr = data_size = data_end = 0;
- export_addr = export_size = export_end = 0;
- reloc_size = 0;
- for (i = 0; i < filehdr.NumberOfSections; i++) {
- if (fread(&secthdr, 1, sizeof(secthdr), f) != sizeof(secthdr))
- goto Error;
- if (strcmp(secthdr.Name, ".edata") == 0 || strcmp(secthdr.Name, ".rdata") == 0) {
- /* Exports section */
- export_off = secthdr.PointerToRawData;
- export_addr = secthdr.VirtualAddress;
- export_size = secthdr.SizeOfRawData;
- export_end = export_addr + export_size;
- }
- else if (strcmp(secthdr.Name, ".idata") == 0) {
- /* Imports section, ignore */
- }
- else if (strcmp(secthdr.Name, ".reloc") == 0) {
- /* Relocations section */
- reloc_off = secthdr.PointerToRawData;
- reloc_size = secthdr.SizeOfRawData;
- }
- else if (!text_off && secthdr.Characteristics & IMAGE_SCN_CNT_CODE) {
- /* Code section */
- text_off = secthdr.PointerToRawData;
- text_addr = secthdr.VirtualAddress;
- text_size = secthdr.SizeOfRawData;
- }
- else if (!data_off && secthdr.Characteristics & IMAGE_SCN_CNT_INITIALIZED_DATA) {
- /* Data section */
- data_off = secthdr.PointerToRawData;
- data_addr = secthdr.VirtualAddress;
- data_size = secthdr.SizeOfRawData;
- data_end = data_addr + data_size;
- }
- }
-
- /* Check to make sure that we have all the sections we need */
- if (!text_off || !data_off || !export_off || !reloc_off) {
- result = PE_invalidDLLImage;
- goto Error;
- }
-
- /* Find the size of the image to load allocate memory for it */
- image_size = MAX(export_end,data_end) - text_addr;
- *size = sizeof(PE_MODULE) + image_size + 4096;
- if (shared)
- hMod = PM_mallocShared(*size);
- else
- hMod = PM_malloc(*size);
- reloc = PM_malloc(reloc_size);
- if (!hMod || !reloc) {
- result = PE_outOfMemory;
- goto Error;
- }
-
- hMod->text = (uchar*)ROUND_4K((ulong)hMod + sizeof(PE_MODULE));
- hMod->data = (uchar*)((ulong)hMod->text + (data_addr - text_addr));
- hMod->export = (uchar*)((ulong)hMod->text + (export_addr - text_addr));
- hMod->textBase = text_addr;
- hMod->dataBase = data_addr;
- hMod->exportBase = export_addr;
- hMod->exportDir = opthdr.DataDirectory[0].RelVirtualAddress - export_addr;
- hMod->shared = shared;
-
- /* Now read the section images from disk */
- result = PE_invalidDLLImage;
- fseek(f, startOffset+text_off, SEEK_SET);
- if (fread(hMod->text, 1, text_size, f) != text_size)
- goto Error;
- fseek(f, startOffset+data_off, SEEK_SET);
- if (fread(hMod->data, 1, data_size, f) != data_size)
- goto Error;
- fseek(f, startOffset+export_off, SEEK_SET);
- if (fread(hMod->export, 1, export_size, f) != export_size)
- goto Error;
- fseek(f, startOffset+reloc_off, SEEK_SET);
- if (fread(reloc, 1, reloc_size, f) != reloc_size)
- goto Error;
-
- /* Now perform relocations on all sections in the image */
- delta = (ulong)hMod->text - opthdr.ImageBase - text_addr;
- baseReloc = (BASE_RELOCATION*)reloc;
- for (;;) {
- /* Check for termination condition */
- if (!baseReloc->PageRVA || !baseReloc->BlockSize)
- break;
-
- /* Do fixups */
- pageOffset = baseReloc->PageRVA - hMod->textBase;
- numFixups = (baseReloc->BlockSize - sizeof(BASE_RELOCATION)) / sizeof(ushort);
- fixup = (ushort*)(baseReloc + 1);
- for (i = 0; i < numFixups; i++) {
- relocType = *fixup >> 12;
- if (relocType) {
- offset = pageOffset + (*fixup & 0x0FFF);
- *(ulong*)(hMod->text + offset) += delta;
- }
- fixup++;
- }
-
- /* Move to next relocation block */
- baseReloc = (BASE_RELOCATION*)((ulong)baseReloc + baseReloc->BlockSize);
- }
-
- /* Initialise the C runtime library for the loaded DLL */
- result = PE_unableToInitLibC;
- if ((InitLibC = (InitLibC_t)PE_getProcAddress(hMod,"_InitLibC")) == NULL)
- goto Error;
- if (!InitLibC(&___imports,PM_getOSType()))
- goto Error;
-
- /* Clean up, close the file and return the loaded module handle */
- PM_free(reloc);
- result = PE_ok;
- return hMod;
-
-Error:
- if (shared)
- PM_freeShared(hMod);
- else
- PM_free(hMod);
- PM_free(reloc);
- return NULL;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Loads a Portable Binary DLL into memory
-
-HEADER:
-peloader.h
-
-PARAMETERS:
-szDLLName - Name of the PE DLL library to load
-shared - True to load module into shared memory
-
-RETURNS:
-Handle to loaded PE DLL, or NULL on failure.
-
-REMARKS:
-This function loads a Portable Binary DLL library from disk, relocates
-the code and returns a handle to the loaded library. This function
-will only work on DLL's that do not have any imports, since we don't
-resolve import dependencies in this function.
-
-SEE ALSO:
-PE_getProcAddress, PE_freeLibrary
-****************************************************************************/
-PE_MODULE * PEAPI PE_loadLibrary(
- const char *szDLLName,
- ibool shared)
-{
- PE_MODULE *hMod;
-
-#if (defined(__WINDOWS32__) || defined(__DRIVER__)) && defined(CHECKED)
- if (!shared) {
- PM_MODULE hInst;
- InitLibC_t InitLibC;
-
- /* For Win32 if are building checked libraries for debugging, we use
- * the real Win32 DLL functions so that we can debug the resulting DLL
- * files with the Win32 debuggers. Note that we can't do this if
- * we need to load the files into a shared memory context.
- */
- if ((hInst = PM_loadLibrary(szDLLName)) == NULL) {
- result = PE_fileNotFound;
- return NULL;
- }
-
- /* Initialise the C runtime library for the loaded DLL */
- result = PE_unableToInitLibC;
- if ((InitLibC = (void*)PM_getProcAddress(hInst,"_InitLibC")) == NULL)
- return NULL;
- if (!InitLibC(&___imports,PM_getOSType()))
- return NULL;
-
- /* Allocate the PE_MODULE structure */
- if ((hMod = PM_malloc(sizeof(*hMod))) == NULL)
- return NULL;
- hMod->text = (void*)hInst;
- hMod->shared = -1;
-
- /* DLL loaded successfully so return module handle */
- result = PE_ok;
- return hMod;
- }
- else
-#endif
- {
- FILE *f;
- ulong size;
-
- /* Attempt to open the file on disk */
- if (shared < 0)
- shared = 0;
- if ((f = fopen(szDLLName,"rb")) == NULL) {
- result = PE_fileNotFound;
- return NULL;
- }
- hMod = PE_loadLibraryExt(f,0,&size,shared);
- fclose(f);
- return hMod;
- }
-}
-
-/****************************************************************************
-DESCRIPTION:
-Loads a Portable Binary DLL into memory
-
-HEADER:
-peloader.h
-
-PARAMETERS:
-szDLLName - Name of the PE DLL library to load
-shared - True to load module into shared memory
-
-RETURNS:
-Handle to loaded PE DLL, or NULL on failure.
-
-REMARKS:
-This function is the same as the regular PE_loadLibrary function, except
-that it looks for the drivers in the MGL_ROOT/drivers directory or a
-/drivers directory relative to the current directory.
-
-SEE ALSO:
-PE_loadLibraryMGL, PE_getProcAddress, PE_freeLibrary
-****************************************************************************/
-PE_MODULE * PEAPI PE_loadLibraryMGL(
- const char *szDLLName,
- ibool shared)
-{
-#if !defined(__WIN32_VXD__) && !defined(__NT_DRIVER__)
- PE_MODULE *hMod;
-#endif
- char path[256] = "";
-
- /* We look in the 'drivers' directory, optionally under the MGL_ROOT
- * environment variable directory.
- */
-#if !defined(__WIN32_VXD__) && !defined(__NT_DRIVER__)
- if (getenv("MGL_ROOT")) {
- strcpy(path,getenv("MGL_ROOT"));
- PM_backslash(path);
- }
- strcat(path,"drivers");
- PM_backslash(path);
- strcat(path,szDLLName);
- if ((hMod = PE_loadLibrary(path,shared)) != NULL)
- return hMod;
-#endif
- strcpy(path,"drivers");
- PM_backslash(path);
- strcat(path,szDLLName);
- return PE_loadLibrary(path,shared);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Gets a function address from a Portable Binary DLL
-
-HEADER:
-peloader.h
-
-PARAMETERS:
-hModule - Handle to a loaded PE DLL library
-szProcName - Name of the function to get the address of
-
-RETURNS:
-Pointer to the function, or NULL on failure.
-
-REMARKS:
-This function searches for the named, exported function in a loaded PE
-DLL library, and returns the address of the function. If the function is
-not found in the library, this function return NULL.
-
-SEE ALSO:
-PE_loadLibrary, PE_freeLibrary
-****************************************************************************/
-void * PEAPI PE_getProcAddress(
- PE_MODULE *hModule,
- const char *szProcName)
-{
-#if (defined(__WINDOWS32__) || defined(__DRIVER__)) && defined(CHECKED)
- if (hModule->shared == -1)
- return (void*)PM_getProcAddress(hModule->text,szProcName);
- else
-#endif
- {
- uint i;
- EXPORT_DIRECTORY *exports;
- ulong funcOffset;
- ulong *AddressTable;
- ulong *NameTable;
- ushort *OrdinalTable;
- char *name;
-
- /* Find the address of the export tables from the export section */
- if (!hModule)
- return NULL;
- exports = (EXPORT_DIRECTORY*)(hModule->export + hModule->exportDir);
- AddressTable = (ulong*)(hModule->export + exports->AddressTableRVA - hModule->exportBase);
- NameTable = (ulong*)(hModule->export + exports->NameTableRVA - hModule->exportBase);
- OrdinalTable = (ushort*)(hModule->export + exports->OrdinalTableRVA - hModule->exportBase);
-
- /* Search the export name table to find the function name */
- for (i = 0; i < exports->NumberOfNamePointers; i++) {
- name = (char*)(hModule->export + NameTable[i] - hModule->exportBase);
- if (strcmp(name,szProcName) == 0)
- break;
- }
- if (i == exports->NumberOfNamePointers)
- return NULL;
- funcOffset = AddressTable[OrdinalTable[i]];
- if (!funcOffset)
- return NULL;
- return (void*)(hModule->text + funcOffset - hModule->textBase);
- }
-}
-
-/****************************************************************************
-DESCRIPTION:
-Frees a loaded Portable Binary DLL
-
-HEADER:
-peloader.h
-
-PARAMETERS:
-hModule - Handle to a loaded PE DLL library to free
-
-REMARKS:
-This function frees a loaded PE DLL library from memory.
-
-SEE ALSO:
-PE_getProcAddress, PE_loadLibrary
-****************************************************************************/
-void PEAPI PE_freeLibrary(
- PE_MODULE *hModule)
-{
- TerminateLibC_t TerminateLibC;
-
-#if (defined(__WINDOWS32__) || defined(__DRIVER__)) && defined(CHECKED)
- if (hModule->shared == -1) {
- /* Run the C runtime library exit code on module unload */
- if ((TerminateLibC = (TerminateLibC_t)PM_getProcAddress(hModule->text,"_TerminateLibC")) != NULL)
- TerminateLibC();
- PM_freeLibrary(hModule->text);
- PM_free(hModule);
- }
- else
-#endif
- {
- if (hModule) {
- /* Run the C runtime library exit code on module unload */
- if ((TerminateLibC = (TerminateLibC_t)PE_getProcAddress(hModule,"_TerminateLibC")) != NULL)
- TerminateLibC();
- if (hModule->shared)
- PM_freeShared(hModule);
- else
- PM_free(hModule);
- }
- }
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns the error code for the last operation
-
-HEADER:
-peloader.h
-
-RETURNS:
-Error code for the last operation.
-
-SEE ALSO:
-PE_getProcAddress, PE_loadLibrary
-****************************************************************************/
-int PEAPI PE_getError(void)
-{
- return result;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/common/vesavbe.c b/board/MAI/bios_emulator/scitech/src/common/vesavbe.c
deleted file mode 100644
index a669e5c292..0000000000
--- a/board/MAI/bios_emulator/scitech/src/common/vesavbe.c
+++ /dev/null
@@ -1,1214 +0,0 @@
-/****************************************************************************
-*
-* The SuperVGA Kit - UniVBE Software Development Kit
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: IBM PC Real Mode and 16/32 bit Protected Mode.
-*
-* Description: Module to implement a C callable interface to the standard
-* VESA VBE routines. You should rip out this module and use it
-* directly in your own applications, or you can use the
-* high level SDK functions.
-*
-* MUST be compiled in the LARGE or FLAT models.
-*
-****************************************************************************/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "vesavbe.h"
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-
-/*---------------------------- Global Variables ---------------------------*/
-
-#define VBE_SUCCESS 0x004F
-#define MAX_LIN_PTRS 10
-
-static uint VESABuf_len = 1024;/* Length of the VESABuf buffer */
-static ibool haveRiva128; /* True if we have a Riva128 */
-static VBE_state defState = {0}; /* Default state buffer */
-static VBE_state *state = &defState; /* Pointer to current buffer */
-static int VBE_shared = 0;
-#ifndef REALMODE
-static char localBuf[512]; /* Global PM string translate buf */
-#define MAX_LOCAL_BUF &localBuf[511]
-#endif
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* static function in WinDirect for passing 32-bit registers to BIOS */
-int PMAPI WD_int386(int intno, RMREGS *in, RMREGS *out);
-
-void VBEAPI VBE_init(void)
-/****************************************************************************
-*
-* Function: VBE_init
-*
-* Description: Initialises the VBE transfer buffer in real mode DC.memory.
-* This routine is called by the VESAVBE module every time
-* it needs to use the transfer buffer, so we simply allocate
-* it once and then return.
-*
-****************************************************************************/
-{
- if (!state->VESABuf_ptr) {
- /* Allocate a global buffer for communicating with the VESA VBE */
- if ((state->VESABuf_ptr = PM_getVESABuf(&VESABuf_len, &state->VESABuf_rseg, &state->VESABuf_roff)) == NULL)
- PM_fatalError("VESAVBE.C: Real mode memory allocation failed!");
- }
-}
-
-void * VBEAPI VBE_getRMBuf(uint *len,uint *rseg,uint *roff)
-/****************************************************************************
-*
-* Function: VBE_getRMBuf
-*
-* Description: This function returns the location and length of the real
-* mode memory buffer for calling real mode functions.
-*
-****************************************************************************/
-{
- *len = VESABuf_len;
- *rseg = state->VESABuf_rseg;
- *roff = state->VESABuf_roff;
- return state->VESABuf_ptr;
-}
-
-void VBEAPI VBE_setStateBuffer(VBE_state *s)
-/****************************************************************************
-*
-* Function: VBE_setStateBuffer
-*
-* Description: This functions sets the internal state buffer for the
-* VBE module to the passed in buffer. By default the internal
-* global buffer is used, but you must use separate buffers
-* for each device in a multi-controller environment.
-*
-****************************************************************************/
-{
- state = s;
-}
-
-void VBEAPI VBE_callESDI(RMREGS *regs, void *buffer, int size)
-/****************************************************************************
-*
-* Function: VBE_callESDI
-* Parameters: regs - Registers to load when calling VBE
-* buffer - Buffer to copy VBE info block to
-* size - Size of buffer to fill
-*
-* Description: Calls the VESA VBE and passes in a buffer for the VBE to
-* store information in, which is then copied into the users
-* buffer space. This works in protected mode as the buffer
-* passed to the VESA VBE is allocated in conventional
-* memory, and is then copied into the users memory block.
-*
-****************************************************************************/
-{
- RMSREGS sregs;
-
- if (!state->VESABuf_ptr)
- PM_fatalError("You *MUST* call VBE_init() before you can call the VESAVBE.C module!");
- sregs.es = (ushort)state->VESABuf_rseg;
- regs->x.di = (ushort)state->VESABuf_roff;
- memcpy(state->VESABuf_ptr, buffer, size);
- PM_int86x(0x10, regs, regs, &sregs);
- memcpy(buffer, state->VESABuf_ptr, size);
-}
-
-#ifndef REALMODE
-static char *VBE_copyStrToLocal(char *p,char *realPtr,char *max)
-/****************************************************************************
-*
-* Function: VBE_copyStrToLocal
-* Parameters: p - Flat model buffer to copy to
-* realPtr - Real mode pointer to copy
-* Returns: Pointer to the next byte after string
-*
-* Description: Copies the string from the real mode location pointed to
-* by 'realPtr' into the flat model buffer pointed to by
-* 'p'. We return a pointer to the next byte past the copied
-* string.
-*
-****************************************************************************/
-{
- uchar *v;
-
- v = PM_mapRealPointer((uint)((ulong)realPtr >> 16), (uint)((ulong)realPtr & 0xFFFF));
- while (*v != 0 && p < max)
- *p++ = *v++;
- *p++ = 0;
- return p;
-}
-
-static void VBE_copyShortToLocal(ushort *p,ushort *realPtr)
-/****************************************************************************
-*
-* Function: VBE_copyShortToLocal
-* Parameters: p - Flat model buffer to copy to
-* realPtr - Real mode pointer to copy
-*
-* Description: Copies the mode table from real mode memory to the flat
-* model buffer.
-*
-****************************************************************************/
-{
- ushort *v;
-
- v = PM_mapRealPointer((uint)((ulong)realPtr >> 16),(uint)((ulong)realPtr & 0xFFFF));
- while (*v != 0xFFFF)
- *p++ = *v++;
- *p = 0xFFFF;
-}
-#endif
-
-int VBEAPI VBE_detectEXT(VBE_vgaInfo *vgaInfo,ibool forceUniVBE)
-/****************************************************************************
-*
-* Function: VBE_detect
-* Parameters: vgaInfo - Place to store the VGA information block
-* Returns: VBE version number, or 0 if not detected.
-*
-* Description: Detects if a VESA VBE is out there and functioning
-* correctly. If we detect a VBE interface we return the
-* VGAInfoBlock returned by the VBE and the VBE version number.
-*
-****************************************************************************/
-{
- RMREGS regs;
-
- regs.x.ax = 0x4F00; /* Get SuperVGA information */
- if (forceUniVBE) {
- regs.x.bx = 0x1234;
- regs.x.cx = 0x4321;
- }
- else {
- regs.x.bx = 0;
- regs.x.cx = 0;
- }
- strncpy(vgaInfo->VESASignature,"VBE2",4);
- VBE_callESDI(&regs, vgaInfo, sizeof(*vgaInfo));
- if (regs.x.ax != VBE_SUCCESS)
- return 0;
- if (strncmp(vgaInfo->VESASignature,"VESA",4) != 0)
- return 0;
-
- /* Check for bogus BIOSes that return a VBE version number that is
- * not correct, and fix it up. We also check the OemVendorNamePtr for a
- * valid value, and if it is invalid then we also reset to VBE 1.2.
- */
- if (vgaInfo->VESAVersion >= 0x200 && vgaInfo->OemVendorNamePtr == 0)
- vgaInfo->VESAVersion = 0x102;
-#ifndef REALMODE
- /* Relocate all the indirect information (mode tables, OEM strings
- * etc) from the low 1Mb memory region into a static buffer in
- * our default data segment. We do this to insulate the application
- * from mapping the strings from real mode to protected mode.
- */
- {
- char *p,*p2;
- p2 = VBE_copyStrToLocal(localBuf,vgaInfo->OemStringPtr,MAX_LOCAL_BUF);
- vgaInfo->OemStringPtr = localBuf;
- if (vgaInfo->VESAVersion >= 0x200) {
- p = VBE_copyStrToLocal(p2,vgaInfo->OemVendorNamePtr,MAX_LOCAL_BUF);
- vgaInfo->OemVendorNamePtr = p2;
- p2 = VBE_copyStrToLocal(p,vgaInfo->OemProductNamePtr,MAX_LOCAL_BUF);
- vgaInfo->OemProductNamePtr = p;
- p = VBE_copyStrToLocal(p2,vgaInfo->OemProductRevPtr,MAX_LOCAL_BUF);
- vgaInfo->OemProductRevPtr = p2;
- VBE_copyShortToLocal((ushort*)p,vgaInfo->VideoModePtr);
- vgaInfo->VideoModePtr = (ushort*)p;
- }
- else {
- VBE_copyShortToLocal((ushort*)p2,vgaInfo->VideoModePtr);
- vgaInfo->VideoModePtr = (ushort*)p2;
- }
- }
-#endif
- state->VBEMemory = vgaInfo->TotalMemory * 64;
-
- /* Check for Riva128 based cards since they have broken triple buffering
- * and stereo support.
- */
- haveRiva128 = false;
- if (vgaInfo->VESAVersion >= 0x300 &&
- (strstr(vgaInfo->OemStringPtr,"NVidia") != NULL ||
- strstr(vgaInfo->OemStringPtr,"Riva") != NULL)) {
- haveRiva128 = true;
- }
-
- /* Check for Matrox G400 cards which claim to be VBE 3.0
- * compliant yet they don't implement the refresh rate control
- * functions.
- */
- if (vgaInfo->VESAVersion >= 0x300 && (strcmp(vgaInfo->OemProductNamePtr,"Matrox G400") == 0))
- vgaInfo->VESAVersion = 0x200;
- return (state->VBEVersion = vgaInfo->VESAVersion);
-}
-
-int VBEAPI VBE_detect(VBE_vgaInfo *vgaInfo)
-/****************************************************************************
-*
-* Function: VBE_detect
-* Parameters: vgaInfo - Place to store the VGA information block
-* Returns: VBE version number, or 0 if not detected.
-*
-* Description: Detects if a VESA VBE is out there and functioning
-* correctly. If we detect a VBE interface we return the
-* VGAInfoBlock returned by the VBE and the VBE version number.
-*
-****************************************************************************/
-{
- return VBE_detectEXT(vgaInfo,false);
-}
-
-ibool VBEAPI VBE_getModeInfo(int mode,VBE_modeInfo *modeInfo)
-/****************************************************************************
-*
-* Function: VBE_getModeInfo
-* Parameters: mode - VBE mode to get information for
-* modeInfo - Place to store VBE mode information
-* Returns: True on success, false if function failed.
-*
-* Description: Obtains information about a specific video mode from the
-* VBE. You should use this function to find the video mode
-* you wish to set, as the new VBE 2.0 mode numbers may be
-* completely arbitrary.
-*
-****************************************************************************/
-{
- RMREGS regs;
- int bits;
-
- regs.x.ax = 0x4F01; /* Get mode information */
- regs.x.cx = (ushort)mode;
- VBE_callESDI(&regs, modeInfo, sizeof(*modeInfo));
- if (regs.x.ax != VBE_SUCCESS)
- return false;
- if ((modeInfo->ModeAttributes & vbeMdAvailable) == 0)
- return false;
-
- /* Map out triple buffer and stereo flags for NVidia Riva128
- * chips.
- */
- if (haveRiva128) {
- modeInfo->ModeAttributes &= ~vbeMdTripleBuf;
- modeInfo->ModeAttributes &= ~vbeMdStereo;
- }
-
- /* Support old style RGB definitions for VBE 1.1 BIOSes */
- bits = modeInfo->BitsPerPixel;
- if (modeInfo->MemoryModel == vbeMemPK && bits > 8) {
- modeInfo->MemoryModel = vbeMemRGB;
- switch (bits) {
- case 15:
- modeInfo->RedMaskSize = 5;
- modeInfo->RedFieldPosition = 10;
- modeInfo->GreenMaskSize = 5;
- modeInfo->GreenFieldPosition = 5;
- modeInfo->BlueMaskSize = 5;
- modeInfo->BlueFieldPosition = 0;
- modeInfo->RsvdMaskSize = 1;
- modeInfo->RsvdFieldPosition = 15;
- break;
- case 16:
- modeInfo->RedMaskSize = 5;
- modeInfo->RedFieldPosition = 11;
- modeInfo->GreenMaskSize = 5;
- modeInfo->GreenFieldPosition = 5;
- modeInfo->BlueMaskSize = 5;
- modeInfo->BlueFieldPosition = 0;
- modeInfo->RsvdMaskSize = 0;
- modeInfo->RsvdFieldPosition = 0;
- break;
- case 24:
- modeInfo->RedMaskSize = 8;
- modeInfo->RedFieldPosition = 16;
- modeInfo->GreenMaskSize = 8;
- modeInfo->GreenFieldPosition = 8;
- modeInfo->BlueMaskSize = 8;
- modeInfo->BlueFieldPosition = 0;
- modeInfo->RsvdMaskSize = 0;
- modeInfo->RsvdFieldPosition = 0;
- break;
- }
- }
-
- /* Convert the 32k direct color modes of VBE 1.2+ BIOSes to
- * be recognised as 15 bits per pixel modes.
- */
- if (bits == 16 && modeInfo->RsvdMaskSize == 1)
- modeInfo->BitsPerPixel = 15;
-
- /* Fix up bogus BIOS'es that report incorrect reserved pixel masks
- * for 32K color modes. Quite a number of BIOS'es have this problem,
- * and this affects our OS/2 drivers in VBE fallback mode.
- */
- if (bits == 15 && (modeInfo->RsvdMaskSize != 1 || modeInfo->RsvdFieldPosition != 15)) {
- modeInfo->RsvdMaskSize = 1;
- modeInfo->RsvdFieldPosition = 15;
- }
- return true;
-}
-
-long VBEAPI VBE_getPageSize(VBE_modeInfo *mi)
-/****************************************************************************
-*
-* Function: VBE_getPageSize
-* Parameters: mi - Pointer to mode information block
-* Returns: Caculated page size in bytes rounded to correct boundary
-*
-* Description: Computes the page size in bytes for the specified mode
-* information block, rounded up to the appropriate boundary
-* (8k, 16k, 32k or 64k). Pages >= 64k in size are always
-* rounded to the nearest 64k boundary (so the start of a
-* page is always bank aligned).
-*
-****************************************************************************/
-{
- long size;
-
- size = (long)mi->BytesPerScanLine * (long)mi->YResolution;
- if (mi->BitsPerPixel == 4) {
- /* We have a 16 color video mode, so round up the page size to
- * 8k, 16k, 32k or 64k boundaries depending on how large it is.
- */
-
- size = (size + 0x1FFFL) & 0xFFFFE000L;
- if (size != 0x2000) {
- size = (size + 0x3FFFL) & 0xFFFFC000L;
- if (size != 0x4000) {
- size = (size + 0x7FFFL) & 0xFFFF8000L;
- if (size != 0x8000)
- size = (size + 0xFFFFL) & 0xFFFF0000L;
- }
- }
- }
- else size = (size + 0xFFFFL) & 0xFFFF0000L;
- return size;
-}
-
-ibool VBEAPI VBE_setVideoModeExt(int mode,VBE_CRTCInfo *crtc)
-/****************************************************************************
-*
-* Function: VBE_setVideoModeExt
-* Parameters: mode - SuperVGA video mode to set.
-* Returns: True if the mode was set, false if not.
-*
-* Description: Attempts to set the specified video mode. This version
-* includes support for the VBE/Core 3.0 refresh rate control
-* mechanism.
-*
-****************************************************************************/
-{
- RMREGS regs;
-
- if (state->VBEVersion < 0x200 && mode < 0x100) {
- /* Some VBE implementations barf terribly if you try to set non-VBE
- * video modes with the VBE set mode call. VBE 2.0 implementations
- * must be able to handle this.
- */
- regs.h.al = (ushort)mode;
- regs.h.ah = 0;
- PM_int86(0x10,&regs,&regs);
- }
- else {
- if (state->VBEVersion < 0x300 && (mode & vbeRefreshCtrl))
- return false;
- regs.x.ax = 0x4F02;
- regs.x.bx = (ushort)mode;
- if ((mode & vbeRefreshCtrl) && crtc)
- VBE_callESDI(&regs, crtc, sizeof(*crtc));
- else
- PM_int86(0x10,&regs,&regs);
- if (regs.x.ax != VBE_SUCCESS)
- return false;
- }
- return true;
-}
-
-ibool VBEAPI VBE_setVideoMode(int mode)
-/****************************************************************************
-*
-* Function: VBE_setVideoMode
-* Parameters: mode - SuperVGA video mode to set.
-* Returns: True if the mode was set, false if not.
-*
-* Description: Attempts to set the specified video mode.
-*
-****************************************************************************/
-{
- return VBE_setVideoModeExt(mode,NULL);
-}
-
-int VBEAPI VBE_getVideoMode(void)
-/****************************************************************************
-*
-* Function: VBE_getVideoMode
-* Returns: Current video mode
-*
-****************************************************************************/
-{
- RMREGS regs;
-
- regs.x.ax = 0x4F03;
- PM_int86(0x10,&regs,&regs);
- if (regs.x.ax != VBE_SUCCESS)
- return -1;
- return regs.x.bx;
-}
-
-ibool VBEAPI VBE_setBank(int window,int bank)
-/****************************************************************************
-*
-* Function: VBE_setBank
-* Parameters: window - Window to set
-* bank - Bank number to set window to
-* Returns: True on success, false on failure.
-*
-****************************************************************************/
-{
- RMREGS regs;
-
- regs.x.ax = 0x4F05;
- regs.h.bh = 0;
- regs.h.bl = window;
- regs.x.dx = bank;
- PM_int86(0x10,&regs,&regs);
- return regs.x.ax == VBE_SUCCESS;
-}
-
-int VBEAPI VBE_getBank(int window)
-/****************************************************************************
-*
-* Function: VBE_setBank
-* Parameters: window - Window to read
-* Returns: Bank number for the window (-1 on failure)
-*
-****************************************************************************/
-{
- RMREGS regs;
-
- regs.x.ax = 0x4F05;
- regs.h.bh = 1;
- regs.h.bl = window;
- PM_int86(0x10,&regs,&regs);
- if (regs.x.ax != VBE_SUCCESS)
- return -1;
- return regs.x.dx;
-}
-
-ibool VBEAPI VBE_setPixelsPerLine(int pixelsPerLine,int *newBytes,
- int *newPixels,int *maxScanlines)
-/****************************************************************************
-*
-* Function: VBE_setPixelsPerLine
-* Parameters: pixelsPerLine - Pixels per scanline
-* newBytes - Storage for bytes per line value set
-* newPixels - Storage for pixels per line value set
-* maxScanLines - Storage for maximum number of scanlines
-* Returns: True on success, false on failure
-*
-* Description: Sets the scanline length for the video mode to the specified
-* number of pixels per scanline. If you need more granularity
-* in TrueColor modes, use the VBE_setBytesPerLine routine
-* (only valid for VBE 2.0).
-*
-****************************************************************************/
-{
- RMREGS regs;
-
- regs.x.ax = 0x4F06;
- regs.h.bl = 0;
- regs.x.cx = pixelsPerLine;
- PM_int86(0x10,&regs,&regs);
- *newBytes = regs.x.bx;
- *newPixels = regs.x.cx;
- *maxScanlines = regs.x.dx;
- return regs.x.ax == VBE_SUCCESS;
-}
-
-ibool VBEAPI VBE_setBytesPerLine(int bytesPerLine,int *newBytes,
- int *newPixels,int *maxScanlines)
-/****************************************************************************
-*
-* Function: VBE_setBytesPerLine
-* Parameters: pixelsPerLine - Pixels per scanline
-* newBytes - Storage for bytes per line value set
-* newPixels - Storage for pixels per line value set
-* maxScanLines - Storage for maximum number of scanlines
-* Returns: True on success, false on failure
-*
-* Description: Sets the scanline length for the video mode to the specified
-* number of bytes per scanline (valid for VBE 2.0 only).
-*
-****************************************************************************/
-{
- RMREGS regs;
-
- regs.x.ax = 0x4F06;
- regs.h.bl = 2;
- regs.x.cx = bytesPerLine;
- PM_int86(0x10,&regs,&regs);
- *newBytes = regs.x.bx;
- *newPixels = regs.x.cx;
- *maxScanlines = regs.x.dx;
- return regs.x.ax == VBE_SUCCESS;
-}
-
-ibool VBEAPI VBE_getScanlineLength(int *bytesPerLine,int *pixelsPerLine,
- int *maxScanlines)
-/****************************************************************************
-*
-* Function: VBE_getScanlineLength
-* Parameters: bytesPerLine - Storage for bytes per scanline
-* pixelsPerLine - Storage for pixels per scanline
-* maxScanLines - Storage for maximum number of scanlines
-* Returns: True on success, false on failure
-*
-****************************************************************************/
-{
- RMREGS regs;
-
- regs.x.ax = 0x4F06;
- regs.h.bl = 1;
- PM_int86(0x10,&regs,&regs);
- *bytesPerLine = regs.x.bx;
- *pixelsPerLine = regs.x.cx;
- *maxScanlines = regs.x.dx;
- return regs.x.ax == VBE_SUCCESS;
-}
-
-ibool VBEAPI VBE_getMaxScanlineLength(int *maxBytes,int *maxPixels)
-/****************************************************************************
-*
-* Function: VBE_getMaxScanlineLength
-* Parameters: maxBytes - Maximum scanline width in bytes
-* maxPixels - Maximum scanline width in pixels
-* Returns: True if successful, false if function failed
-*
-****************************************************************************/
-{
- RMREGS regs;
-
- regs.x.ax = 0x4F06;
- regs.h.bl = 3;
- PM_int86(0x10,&regs,&regs);
- *maxBytes = regs.x.bx;
- *maxPixels = regs.x.cx;
- return regs.x.ax == VBE_SUCCESS;
-}
-
-ibool VBEAPI VBE_setDisplayStart(int x,int y,ibool waitVRT)
-/****************************************************************************
-*
-* Function: VBE_setDisplayStart
-* Parameters: x,y - Position of the first pixel to display
-* waitVRT - True to wait for retrace, false if not
-* Returns: True if function was successful.
-*
-* Description: Sets the new starting display position to implement
-* hardware scrolling.
-*
-****************************************************************************/
-{
- RMREGS regs;
-
- regs.x.ax = 0x4F07;
- if (waitVRT)
- regs.x.bx = 0x80;
- else regs.x.bx = 0x00;
- regs.x.cx = x;
- regs.x.dx = y;
- PM_int86(0x10,&regs,&regs);
- return regs.x.ax == VBE_SUCCESS;
-}
-
-ibool VBEAPI VBE_getDisplayStart(int *x,int *y)
-/****************************************************************************
-*
-* Function: VBE_getDisplayStart
-* Parameters: x,y - Place to store starting address value
-* Returns: True if function was successful.
-*
-****************************************************************************/
-{
- RMREGS regs;
-
- regs.x.ax = 0x4F07;
- regs.x.bx = 0x01;
- PM_int86(0x10,&regs,&regs);
- *x = regs.x.cx;
- *y = regs.x.dx;
- return regs.x.ax == VBE_SUCCESS;
-}
-
-ibool VBEAPI VBE_setDisplayStartAlt(ulong startAddr,ibool waitVRT)
-/****************************************************************************
-*
-* Function: VBE_setDisplayStartAlt
-* Parameters: startAddr - 32-bit starting address in display memory
-* waitVRT - True to wait for vertical retrace, false if not
-* Returns: True if function was successful, false if not supported.
-*
-* Description: Sets the new starting display position to the specified
-* 32-bit display start address. Note that this function is
-* different the the version above, since it takes a 32-bit
-* byte offset in video memory as the starting address which
-* gives the programmer maximum control over the stat address.
-*
-* NOTE: Requires VBE/Core 3.0
-*
-****************************************************************************/
-{
- RMREGS regs;
-
- if (state->VBEVersion >= 0x300) {
- regs.x.ax = 0x4F07;
- regs.x.bx = waitVRT ? 0x82 : 0x02;
- regs.e.ecx = startAddr;
- PM_int86(0x10,&regs,&regs);
- return regs.x.ax == VBE_SUCCESS;
- }
- return false;
-}
-
-int VBEAPI VBE_getDisplayStartStatus(void)
-/****************************************************************************
-*
-* Function: VBE_getDisplayStartStatus
-* Returns: 0 if last flip not occurred, 1 if already flipped
-* -1 if not supported
-*
-* Description: Returns the status of the previous display start request.
-* If this function is supported the programmer can implement
-* hardware triple buffering using this function.
-*
-* NOTE: Requires VBE/Core 3.0
-*
-****************************************************************************/
-{
- RMREGS regs;
-
- if (state->VBEVersion >= 0x300) {
- regs.x.ax = 0x4F07;
- regs.x.bx = 0x0004;
- PM_int86(0x10,&regs,&regs);
- if (regs.x.ax == VBE_SUCCESS)
- return (regs.x.cx != 0);
- }
- return -1;
-}
-
-ibool VBEAPI VBE_enableStereoMode(void)
-/****************************************************************************
-*
-* Function: VBE_enableStereoMode
-* Returns: True if stereo mode enabled, false if not supported.
-*
-* Description: Puts the system into hardware stereo mode for LC shutter
-* glasses, where the display swaps between two display start
-* addresses every vertical retrace.
-*
-* NOTE: Requires VBE/Core 3.0
-*
-****************************************************************************/
-{
- RMREGS regs;
-
- if (state->VBEVersion >= 0x300) {
- regs.x.ax = 0x4F07;
- regs.x.bx = 0x0005;
- PM_int86(0x10,&regs,&regs);
- return regs.x.ax == VBE_SUCCESS;
- }
- return false;
-}
-
-ibool VBEAPI VBE_disableStereoMode(void)
-/****************************************************************************
-*
-* Function: VBE_disableStereoMode
-* Returns: True if stereo mode disabled, false if not supported.
-*
-* Description: Puts the system back into normal, non-stereo display mode
-* after having stereo mode enabled.
-*
-* NOTE: Requires VBE/Core 3.0
-*
-****************************************************************************/
-{
- RMREGS regs;
-
- if (state->VBEVersion >= 0x300) {
- regs.x.ax = 0x4F07;
- regs.x.bx = 0x0006;
- PM_int86(0x10,&regs,&regs);
- return regs.x.ax == VBE_SUCCESS;
- }
- return false;
-}
-
-ibool VBEAPI VBE_setStereoDisplayStart(ulong leftAddr,ulong rightAddr,
- ibool waitVRT)
-/****************************************************************************
-*
-* Function: VBE_setStereoDisplayStart
-* Parameters: leftAddr - 32-bit start address for left image
-* rightAddr - 32-bit start address for right image
-* waitVRT - True to wait for vertical retrace, false if not
-* Returns: True if function was successful, false if not supported.
-*
-* Description: Sets the new starting display position to the specified
-* 32-bit display start address. Note that this function is
-* different the the version above, since it takes a 32-bit
-* byte offset in video memory as the starting address which
-* gives the programmer maximum control over the stat address.
-*
-* NOTE: Requires VBE/Core 3.0
-*
-****************************************************************************/
-{
- RMREGS regs;
-
- if (state->VBEVersion >= 0x300) {
- regs.x.ax = 0x4F07;
- regs.x.bx = waitVRT ? 0x83 : 0x03;
- regs.e.ecx = leftAddr;
- regs.e.edx = rightAddr;
- PM_int86(0x10,&regs,&regs);
- return regs.x.ax == VBE_SUCCESS;
- }
- return false;
-}
-
-ulong VBEAPI VBE_getClosestClock(ushort mode,ulong pixelClock)
-/****************************************************************************
-*
-* Function: VBE_getClosestClock
-* Parameters: mode - VBE mode to be used (include vbeLinearBuffer)
-* pixelClock - Desired pixel clock
-* Returns: Closest pixel clock to desired clock (-1 if not supported)
-*
-* Description: Calls the VBE/Core 3.0 interface to determine the closest
-* pixel clock to the requested value. The BIOS will always
-* search for a pixel clock that is no more than 1% below the
-* requested clock or somewhere higher than the clock. If the
-* clock is higher note that it may well be many Mhz higher
-* that requested and the application will have to check that
-* the returned value is suitable for it's needs. This function
-* returns the actual pixel clock that will be programmed by
-* the hardware.
-*
-* Note that if the pixel clock will be used with a linear
-* framebuffer mode, make sure you pass in the linear
-* framebuffer flag to this function.
-*
-* NOTE: Requires VBE/Core 3.0
-*
-****************************************************************************/
-{
- RMREGS regs;
-
- if (state->VBEVersion >= 0x300) {
- regs.x.ax = 0x4F0B;
- regs.h.bl = 0x00;
- regs.e.ecx = pixelClock;
- regs.x.dx = mode;
- PM_int86(0x10,&regs,&regs);
- if (regs.x.ax == VBE_SUCCESS)
- return regs.e.ecx;
- }
- return -1;
-}
-
-ibool VBEAPI VBE_setDACWidth(int width)
-/****************************************************************************
-*
-* Function: VBE_setDACWidth
-* Parameters: width - Width to set the DAC to
-* Returns: True on success, false on failure
-*
-****************************************************************************/
-{
- RMREGS regs;
-
- regs.x.ax = 0x4F08;
- regs.h.bl = 0x00;
- regs.h.bh = width;
- PM_int86(0x10,&regs,&regs);
- return regs.x.ax == VBE_SUCCESS;
-}
-
-int VBEAPI VBE_getDACWidth(void)
-/****************************************************************************
-*
-* Function: VBE_getDACWidth
-* Returns: Current width of the palette DAC
-*
-****************************************************************************/
-{
- RMREGS regs;
-
- regs.x.ax = 0x4F08;
- regs.h.bl = 0x01;
- PM_int86(0x10,&regs,&regs);
- if (regs.x.ax != VBE_SUCCESS)
- return -1;
- return regs.h.bh;
-}
-
-ibool VBEAPI VBE_setPalette(int start,int num,VBE_palette *pal,ibool waitVRT)
-/****************************************************************************
-*
-* Function: VBE_setPalette
-* Parameters: start - Starting palette index to program
-* num - Number of palette indexes to program
-* pal - Palette buffer containing values
-* waitVRT - Wait for vertical retrace flag
-* Returns: True on success, false on failure
-*
-* Description: Sets a block of palette registers by calling the VBE 2.0
-* BIOS. This function will fail on VBE 1.2 implementations.
-*
-****************************************************************************/
-{
- RMREGS regs;
-
- regs.x.ax = 0x4F09;
- regs.h.bl = waitVRT ? 0x80 : 0x00;
- regs.x.cx = num;
- regs.x.dx = start;
- VBE_callESDI(&regs, pal, sizeof(VBE_palette) * num);
- return regs.x.ax == VBE_SUCCESS;
-}
-
-void * VBEAPI VBE_getBankedPointer(VBE_modeInfo *modeInfo)
-/****************************************************************************
-*
-* Function: VBE_getBankedPointer
-* Parameters: modeInfo - Mode info block for video mode
-* Returns: Selector to the linear framebuffer (0 on failure)
-*
-* Description: Returns a near pointer to the VGA framebuffer area.
-*
-****************************************************************************/
-{
- /* We just map the pointer every time, since the pointer will always
- * be in real mode memory, so we wont actually be mapping any real
- * memory.
- *
- * NOTE: We cannot currently map a near pointer to the banked frame
- * buffer for Watcom Win386, so we create a 16:16 far pointer to
- * the video memory. All the assembler code will render to the
- * video memory by loading the selector rather than using a
- * near pointer.
- */
- ulong seg = (ushort)modeInfo->WinASegment;
- if (seg != 0) {
- if (seg == 0xA000)
- return (void*)PM_getA0000Pointer();
- else
- return (void*)PM_mapPhysicalAddr(seg << 4,0xFFFF,true);
- }
- return NULL;
-}
-
-#ifndef REALMODE
-
-void * VBEAPI VBE_getLinearPointer(VBE_modeInfo *modeInfo)
-/****************************************************************************
-*
-* Function: VBE_getLinearPointer
-* Parameters: modeInfo - Mode info block for video mode
-* Returns: Selector to the linear framebuffer (0 on failure)
-*
-* Description: Returns a near pointer to the linear framebuffer for the video
-* mode.
-*
-****************************************************************************/
-{
- static ulong physPtr[MAX_LIN_PTRS] = {0};
- static void *linPtr[MAX_LIN_PTRS] = {0};
- static int numPtrs = 0;
- int i;
-
- /* Search for an already mapped pointer */
- for (i = 0; i < numPtrs; i++) {
- if (physPtr[i] == modeInfo->PhysBasePtr)
- return linPtr[i];
- }
- if (numPtrs < MAX_LIN_PTRS) {
- physPtr[numPtrs] = modeInfo->PhysBasePtr;
- linPtr[numPtrs] = PM_mapPhysicalAddr(modeInfo->PhysBasePtr,(state->VBEMemory * 1024L)-1,true);
- return linPtr[numPtrs++];
- }
- return NULL;
-}
-
-static void InitPMCode(void)
-/****************************************************************************
-*
-* Function: InitPMCode - 32 bit protected mode version
-*
-* Description: Finds the address of and relocates the protected mode
-* code block from the VBE 2.0 into a local memory block. The
-* memory block is allocated with malloc() and must be freed
-* with VBE_freePMCode() after graphics processing is complete.
-*
-* Note that this buffer _must_ be recopied after each mode set,
-* as the routines will change depending on the underlying
-* video mode.
-*
-****************************************************************************/
-{
- RMREGS regs;
- RMSREGS sregs;
- uchar *code;
- int pmLen;
-
- if (!state->pmInfo && state->VBEVersion >= 0x200) {
- regs.x.ax = 0x4F0A;
- regs.x.bx = 0;
- PM_int86x(0x10,&regs,&regs,&sregs);
- if (regs.x.ax != VBE_SUCCESS)
- return;
- if (VBE_shared)
- state->pmInfo = PM_mallocShared(regs.x.cx);
- else
- state->pmInfo = PM_malloc(regs.x.cx);
- if (state->pmInfo == NULL)
- return;
- state->pmInfo32 = state->pmInfo;
- pmLen = regs.x.cx;
-
- /* Relocate the block into our local data segment */
- code = PM_mapRealPointer(sregs.es,regs.x.di);
- memcpy(state->pmInfo,code,pmLen);
-
- /* Now do a sanity check on the information we recieve to ensure
- * that is is correct. Some BIOS return totally bogus information
- * in here (Matrox is one)! Under DOS this works OK, but under OS/2
- * we are screwed.
- */
- if (state->pmInfo->setWindow >= pmLen ||
- state->pmInfo->setDisplayStart >= pmLen ||
- state->pmInfo->setPalette >= pmLen ||
- state->pmInfo->IOPrivInfo >= pmLen) {
- if (VBE_shared)
- PM_freeShared(state->pmInfo);
- else
- PM_free(state->pmInfo);
- state->pmInfo32 = state->pmInfo = NULL;
- return;
- }
-
- /* Read the IO priveledge info and determine if we need to
- * pass a selector to MMIO registers to the bank switch code.
- * Since we no longer support selector allocation, we no longer
- * support this mechanism so we disable the protected mode
- * interface in this case.
- */
- if (state->pmInfo->IOPrivInfo && !state->MMIOSel) {
- ushort *p = (ushort*)((uchar*)state->pmInfo + state->pmInfo->IOPrivInfo);
- while (*p != 0xFFFF)
- p++;
- p++;
- if (*p != 0xFFFF)
- VBE_freePMCode();
- }
- }
-}
-
-void * VBEAPI VBE_getSetBank(void)
-/****************************************************************************
-*
-* Function: VBE_getSetBank
-* Returns: Pointer to the 32 VBE 2.0 bit bank switching routine.
-*
-****************************************************************************/
-{
- if (state->VBEVersion >= 0x200) {
- InitPMCode();
- if (state->pmInfo)
- return (uchar*)state->pmInfo + state->pmInfo->setWindow;
- }
- return NULL;
-}
-
-void * VBEAPI VBE_getSetDisplayStart(void)
-/****************************************************************************
-*
-* Function: VBE_getSetDisplayStart
-* Returns: Pointer to the 32 VBE 2.0 bit CRT start address routine.
-*
-****************************************************************************/
-{
- if (state->VBEVersion >= 0x200) {
- InitPMCode();
- if (state->pmInfo)
- return (uchar*)state->pmInfo + state->pmInfo->setDisplayStart;
- }
- return NULL;
-}
-
-void * VBEAPI VBE_getSetPalette(void)
-/****************************************************************************
-*
-* Function: VBE_getSetPalette
-* Returns: Pointer to the 32 VBE 2.0 bit palette programming routine.
-*
-****************************************************************************/
-{
- if (state->VBEVersion >= 0x200) {
- InitPMCode();
- if (state->pmInfo)
- return (uchar*)state->pmInfo + state->pmInfo->setPalette;
- }
- return NULL;
-}
-
-void VBEAPI VBE_freePMCode(void)
-/****************************************************************************
-*
-* Function: VBE_freePMCode
-*
-* Description: This routine frees the protected mode code blocks that
-* we copied from the VBE 2.0 interface. This routine must
-* be after you have finished graphics processing to free up
-* the memory occupied by the routines. This is necessary
-* because the PM info memory block must be re-copied after
-* every video mode set from the VBE 2.0 implementation.
-*
-****************************************************************************/
-{
- if (state->pmInfo) {
- if (VBE_shared)
- PM_freeShared(state->pmInfo);
- else
- PM_free(state->pmInfo);
- state->pmInfo = NULL;
- state->pmInfo32 = NULL;
- }
-}
-
-void VBEAPI VBE_sharePMCode(void)
-/****************************************************************************
-*
-* Function: VBE_sharePMCode
-*
-* Description: Enables internal sharing of the PM code buffer for OS/2.
-*
-****************************************************************************/
-{
- VBE_shared = true;
-}
-
-/* Set of code stubs used to build the final bank switch code */
-
-#define VBE20_adjustOffset 7
-
-static uchar VBE20A_bankFunc32_Start[] = {
- 0x53,0x51, /* push ebx,ecx */
- 0x8B,0xD0, /* mov edx,eax */
- 0x33,0xDB, /* xor ebx,ebx */
- 0xB1,0x00, /* mov cl,0 */
- 0xD2,0xE2, /* shl dl,cl */
- };
-
-static uchar VBE20_bankFunc32_End[] = {
- 0x59,0x5B, /* pop ecx,ebx */
- };
-
-static uchar bankFunc32[100];
-
-#define copy(p,b,a) memcpy(b,a,sizeof(a)); (p) = (b) + sizeof(a)
-
-ibool VBEAPI VBE_getBankFunc32(int *codeLen,void **bankFunc,int dualBanks,
- int bankAdjust)
-/****************************************************************************
-*
-* Function: VBE_getBankFunc32
-* Parameters: codeLen - Place to store length of code
-* bankFunc - Place to store pointer to bank switch code
-* dualBanks - True if dual banks are in effect
-* bankAdjust - Bank shift adjustment factor
-* Returns: True on success, false if not compatible.
-*
-* Description: Creates a local 32 bit bank switch function from the
-* VBE 2.0 bank switch code that is compatible with the
-* virtual flat framebuffer devices (does not have a return
-* instruction at the end and takes the bank number in EAX
-* not EDX). Note that this 32 bit code cannot include int 10h
-* instructions, so we can only do this if we have VBE 2.0
-* or later.
-*
-* Note that we need to know the length of the 32 bit
-* bank switch function, which the standard VBE 2.0 spec
-* does not provide. In order to support this we have
-* extended the VBE 2.0 state->pmInfo structure in UniVBE 5.2 in a
-* way to support this, and we hope that this will become
-* a VBE 2.0 ammendment.
-*
-* Note also that we cannot run the linear framebuffer
-* emulation code with bank switching routines that require
-* a selector to the memory mapped registers passed in ES.
-*
-****************************************************************************/
-{
- int len;
- uchar *code;
- uchar *p;
-
- InitPMCode();
- if (state->VBEVersion >= 0x200 && state->pmInfo32 && !state->MMIOSel) {
- code = (uchar*)state->pmInfo32 + state->pmInfo32->setWindow;
- if (state->pmInfo32->extensionSig == VBE20_EXT_SIG)
- len = state->pmInfo32->setWindowLen-1;
- else {
- /* We are running on a system without the UniVBE 5.2 extension.
- * We do as best we can by scanning through the code for the
- * ret function to determine the length. This is not foolproof,
- * but is the best we can do.
- */
- p = code;
- while (*p != 0xC3)
- p++;
- len = p - code;
- }
- if ((len + sizeof(VBE20A_bankFunc32_Start) + sizeof(VBE20_bankFunc32_End)) > sizeof(bankFunc32))
- PM_fatalError("32-bit bank switch function too long!");
- copy(p,bankFunc32,VBE20A_bankFunc32_Start);
- memcpy(p,code,len);
- p += len;
- copy(p,p,VBE20_bankFunc32_End);
- *codeLen = p - bankFunc32;
- bankFunc32[VBE20_adjustOffset] = (uchar)bankAdjust;
- *bankFunc = bankFunc32;
- return true;
- }
- return false;
-}
-
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/pm/beos/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/beos/cpuinfo.c
deleted file mode 100644
index cb3afe20c1..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/beos/cpuinfo.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: *** TODO: ADD YOUR OS ENVIRONMENT NAME HERE ***
-*
-* Description: Module to implement OS specific services to measure the
-* CPU frequency.
-*
-****************************************************************************/
-
-#include <OS.h>
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Increase the thread priority to maximum, if possible.
-****************************************************************************/
-static int SetMaxThreadPriority(void)
-{
- thread_id thid = find_thread(NULL);
- thread_info tinfo;
- get_thread_info(thid, &tinfo);
- set_thread_priority(thid, B_REAL_TIME_PRIORITY);
- return tinfo.priority;
-}
-
-/****************************************************************************
-REMARKS:
-Restore the original thread priority.
-****************************************************************************/
-static void RestoreThreadPriority(
- int priority)
-{
- thread_id thid = find_thread(NULL);
- set_thread_priority(thid, priority);
-}
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
- CPU_largeInteger *freq)
-{
- /* TODO: Return the frequency of the counter in here. You should try to */
- /* normalise this value to be around 100,000 ticks per second. */
- freq->low = 1000000;
- freq->high = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-
-TODO: Implement this to read the counter. It should be done as a macro
- for accuracy.
-****************************************************************************/
-#define GetCounter(t) { *((bigtime_t*) t) = system_time(); }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/beos/event.c b/board/MAI/bios_emulator/scitech/src/pm/beos/event.c
deleted file mode 100644
index 93c6c0a8fc..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/beos/event.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: BeOS
-*
-* Description: BeOS implementation for the SciTech cross platform
-* event library.
-*
-****************************************************************************/
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static ushort keyUpMsg[256] = {0};/* Table of key up messages */
-static int rangeX,rangeY; /* Range of mouse coordinates */
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* These are not used under non-DOS systems */
-#define _EVT_disableInt() 1
-#define _EVT_restoreInt(flags)
-
-/****************************************************************************
-PARAMETERS:
-scanCode - Scan code to test
-
-REMARKS:
-This macro determines if a specified key is currently down at the
-time that the call is made.
-****************************************************************************/
-#define _EVT_isKeyDown(scanCode) (keyUpMsg[scanCode] != 0)
-
-/****************************************************************************
-REMARKS:
-This function is used to return the number of ticks since system
-startup in milliseconds. This should be the same value that is placed into
-the time stamp fields of events, and is used to implement auto mouse down
-events.
-****************************************************************************/
-ulong _EVT_getTicks(void)
-{
- /* TODO: Implement this for your OS! */
-}
-
-/****************************************************************************
-REMARKS:
-Pumps all messages in the application message queue into our event queue.
-****************************************************************************/
-static void _EVT_pumpMessages(void)
-{
- /* TODO: The purpose of this function is to read all keyboard and mouse */
- /* events from the OS specific event queue, translate them and post */
- /* them into the SciTech event queue. */
- /* */
- /* NOTE: There are a couple of important things that this function must */
- /* take care of: */
- /* */
- /* 1. Support for KEYDOWN, KEYREPEAT and KEYUP is required. */
- /* */
- /* 2. Support for reading hardware scan code as well as ASCII */
- /* translated values is required. Games use the scan codes rather */
- /* than ASCII values. Scan codes go into the high order byte of the */
- /* keyboard message field. */
- /* */
- /* 3. Support for at least reading mouse motion data (mickeys) from the */
- /* mouse is required. Using the mickey values, we can then translate */
- /* to mouse cursor coordinates scaled to the range of the current */
- /* graphics display mode. Mouse values are scaled based on the */
- /* global 'rangeX' and 'rangeY'. */
- /* */
- /* 4. Support for a timestamp for the events is required, which is */
- /* defined as the number of milliseconds since some event (usually */
- /* system startup). This is the timestamp when the event occurred */
- /* (ie: at interrupt time) not when it was stuff into the SciTech */
- /* event queue. */
- /* */
- /* 5. Support for mouse double click events. If the OS has a native */
- /* mechanism to determine this, it should be used. Otherwise the */
- /* time stamp information will be used by the generic event code */
- /* to generate double click events. */
-}
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-****************************************************************************/
-#define _EVT_maskKeyCode(evt)
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort()
-{
- EVT_exit();
- PM_fatalError("Unhandled exception!");
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
- _EVT_mouseMoveHandler mouseMove)
-{
- /* Initialise the event queue */
- _mouseMove = mouseMove;
- initEventQueue();
- memset(keyUpMsg,0,sizeof(keyUpMsg));
-
- /* TODO: Do any OS specific initialisation here */
-
- /* Catch program termination signals so we can clean up properly */
- signal(SIGABRT, _EVT_abort);
- signal(SIGFPE, _EVT_abort);
- signal(SIGINT, _EVT_abort);
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
- int xRes,
- int yRes)
-{
- rangeX = xRes;
- rangeY = yRes;
-}
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVT_resume(void)
-{
- /* Do nothing for non DOS systems */
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVT_suspend(void)
-{
- /* Do nothing for non DOS systems */
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVT_exit(void)
-{
- /* Restore signal handlers */
- signal(SIGABRT, SIG_DFL);
- signal(SIGFPE, SIG_DFL);
- signal(SIGINT, SIG_DFL);
-
- /* TODO: Do any OS specific cleanup in here */
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/beos/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/beos/oshdr.h
deleted file mode 100644
index 043d73ecd1..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/beos/oshdr.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: BeOS
-*
-* Description: Include file to include all OS specific header files.
-*
-****************************************************************************/
-
-/* This is where you include OS specific headers for the event handling */
-/* library. */
diff --git a/board/MAI/bios_emulator/scitech/src/pm/beos/pm.c b/board/MAI/bios_emulator/scitech/src/pm/beos/pm.c
deleted file mode 100644
index 2dcb1b81fb..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/beos/pm.c
+++ /dev/null
@@ -1,539 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: BeOS
-*
-* Description: Implementation for the OS Portability Manager Library, which
-* contains functions to implement OS specific services in a
-* generic, cross platform API. Porting the OS Portability
-* Manager library is the first step to porting any SciTech
-* products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-/* TODO: Include any BeOS specific headers here! */
-
-/*--------------------------- Global variables ----------------------------*/
-
-static void (PMAPIP fatalErrorCleanup)(void) = NULL;
-
-/*----------------------------- Implementation ----------------------------*/
-
-void PMAPI PM_init(void)
-{
- /* TODO: Do any initialisation in here. This includes getting IOPL */
- /* access for the process calling PM_init. This will get called */
- /* more than once. */
-
- /* TODO: If you support the supplied MTRR register stuff (you need to */
- /* be at ring 0 for this!), you should initialise it in here. */
-
-/* MTRR_init(); */
-}
-
-long PMAPI PM_getOSType(void)
-{ return _OS_BEOS; }
-
-int PMAPI PM_getModeType(void)
-{ return PM_386; }
-
-void PMAPI PM_backslash(char *s)
-{
- uint pos = strlen(s);
- if (s[pos-1] != '/') {
- s[pos] = '/';
- s[pos+1] = '\0';
- }
-}
-
-void PMAPI PM_setFatalErrorCleanup(
- void (PMAPIP cleanup)(void))
-{
- fatalErrorCleanup = cleanup;
-}
-
-void PMAPI PM_fatalError(const char *msg)
-{
- /* TODO: If you are running in a GUI environment without a console, */
- /* this needs to be changed to bring up a fatal error message */
- /* box and terminate the program. */
- if (fatalErrorCleanup)
- fatalErrorCleanup();
- fprintf(stderr,"%s\n", msg);
- exit(1);
-}
-
-void * PMAPI PM_getVESABuf(uint *len,uint *rseg,uint *roff)
-{
- /* No BIOS access for the BeOS */
- return NULL;
-}
-
-int PMAPI PM_kbhit(void)
-{
- /* TODO: This function checks if a key is available to be read. This */
- /* should be implemented, but is mostly used by the test programs */
- /* these days. */
- return true;
-}
-
-int PMAPI PM_getch(void)
-{
- /* TODO: This returns the ASCII code of the key pressed. This */
- /* should be implemented, but is mostly used by the test programs */
- /* these days. */
- return 0xD;
-}
-
-int PMAPI PM_openConsole(void)
-{
- /* TODO: Opens up a fullscreen console for graphics output. If your */
- /* console does not have graphics/text modes, this can be left */
- /* empty. The main purpose of this is to disable console switching */
- /* when in graphics modes if you can switch away from fullscreen */
- /* consoles (if you want to allow switching, this can be done */
- /* elsewhere with a full save/restore state of the graphics mode). */
- return 0;
-}
-
-int PMAPI PM_getConsoleStateSize(void)
-{
- /* TODO: Returns the size of the console state buffer used to save the */
- /* state of the console before going into graphics mode. This is */
- /* used to restore the console back to normal when we are done. */
- return 1;
-}
-
-void PMAPI PM_saveConsoleState(void *stateBuf,int console_id)
-{
- /* TODO: Saves the state of the console into the state buffer. This is */
- /* used to restore the console back to normal when we are done. */
- /* We will always restore 80x25 text mode after being in graphics */
- /* mode, so if restoring text mode is all you need to do this can */
- /* be left empty. */
-}
-
-void PMAPI PM_restoreConsoleState(const void *stateBuf,int console_id)
-{
- /* TODO: Restore the state of the console from the state buffer. This is */
- /* used to restore the console back to normal when we are done. */
- /* We will always restore 80x25 text mode after being in graphics */
- /* mode, so if restoring text mode is all you need to do this can */
- /* be left empty. */
-}
-
-void PMAPI PM_closeConsole(int console_id)
-{
- /* TODO: Close the console when we are done, going back to text mode. */
-}
-
-void PM_setOSCursorLocation(int x,int y)
-{
- /* TODO: Set the OS console cursor location to the new value. This is */
- /* generally used for new OS ports (used mostly for DOS). */
-}
-
-void PM_setOSScreenWidth(int width,int height)
-{
- /* TODO: Set the OS console screen width. This is generally unused for */
- /* new OS ports. */
-}
-
-ibool PMAPI PM_setRealTimeClockHandler(PM_intHandler ih, int frequency)
-{
- /* TODO: Install a real time clock interrupt handler. Normally this */
- /* will not be supported from most OS'es in user land, so an */
- /* alternative mechanism is needed to enable software stereo. */
- /* Hence leave this unimplemented unless you have a high priority */
- /* mechanism to call the 32-bit callback when the real time clock */
- /* interrupt fires. */
- return false;
-}
-
-void PMAPI PM_setRealTimeClockFrequency(int frequency)
-{
- /* TODO: Set the real time clock interrupt frequency. Used for stereo */
- /* LC shutter glasses when doing software stereo. Usually sets */
- /* the frequency to around 2048 Hz. */
-}
-
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
- /* TODO: Restores the real time clock handler. */
-}
-
-char * PMAPI PM_getCurrentPath(
- char *path,
- int maxLen)
-{
- return getcwd(path,maxLen);
-}
-
-char PMAPI PM_getBootDrive(void)
-{ return '/'; }
-
-const char * PMAPI PM_getVBEAFPath(void)
-{ return PM_getNucleusConfigPath(); }
-
-const char * PMAPI PM_getNucleusPath(void)
-{
- char *env = getenv("NUCLEUS_PATH");
- return env ? env : "/usr/lib/nucleus";
-}
-
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
- static char path[256];
- strcpy(path,PM_getNucleusPath());
- PM_backslash(path);
- strcat(path,"config");
- return path;
-}
-
-const char * PMAPI PM_getUniqueID(void)
-{
- /* TODO: Return a unique ID for the machine. If a unique ID is not */
- /* available, return the machine name. */
- static char buf[128];
- gethostname(buf, 128);
- return buf;
-}
-
-const char * PMAPI PM_getMachineName(void)
-{
- /* TODO: Return the network machine name for the machine. */
- static char buf[128];
- gethostname(buf, 128);
- return buf;
-}
-
-void * PMAPI PM_getBIOSPointer(void)
-{
- /* No BIOS access on the BeOS */
- return NULL;
-}
-
-void * PMAPI PM_getA0000Pointer(void)
-{
- static void *bankPtr;
- if (!bankPtr)
- bankPtr = PM_mapPhysicalAddr(0xA0000,0xFFFF,true);
- return bankPtr;
-}
-
-void * PMAPI PM_mapPhysicalAddr(ulong base,ulong limit,ibool isCached)
-{
- /* TODO: This function maps a physical memory address to a linear */
- /* address in the address space of the calling process. */
-
- /* NOTE: This function *must* be able to handle any phsyical base */
- /* address, and hence you will have to handle rounding of */
- /* the physical base address to a page boundary (ie: 4Kb on */
- /* x86 CPU's) to be able to properly map in the memory */
- /* region. */
-
- /* NOTE: If possible the isCached bit should be used to ensure that */
- /* the PCD (Page Cache Disable) and PWT (Page Write Through) */
- /* bits are set to disable caching for a memory mapping used */
- /* for MMIO register access. We also disable caching using */
- /* the MTRR registers for Pentium Pro and later chipsets so if */
- /* MTRR support is enabled for your OS then you can safely ignore */
- /* the isCached flag and always enable caching in the page */
- /* tables. */
- return NULL;
-}
-
-void PMAPI PM_freePhysicalAddr(void *ptr,ulong limit)
-{
- /* TODO: This function will free a physical memory mapping previously */
- /* allocated with PM_mapPhysicalAddr() if at all possible. If */
- /* you can't free physical memory mappings, simply do nothing. */
-}
-
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{
- /* TODO: This function should find the physical address of a linear */
- /* address. */
- return 0xFFFFFFFFUL;
-}
-
-void PMAPI PM_sleep(ulong milliseconds)
-{
- /* TODO: Put the process to sleep for milliseconds */
-}
-
-int PMAPI PM_getCOMPort(int port)
-{
- /* TODO: Re-code this to determine real values using the Plug and Play */
- /* manager for the OS. */
- switch (port) {
- case 0: return 0x3F8;
- case 1: return 0x2F8;
- }
- return 0;
-}
-
-int PMAPI PM_getLPTPort(int port)
-{
- /* TODO: Re-code this to determine real values using the Plug and Play */
- /* manager for the OS. */
- switch (port) {
- case 0: return 0x3BC;
- case 1: return 0x378;
- case 2: return 0x278;
- }
- return 0;
-}
-
-void * PMAPI PM_mallocShared(long size)
-{
- /* TODO: This is used to allocate memory that is shared between process */
- /* that all access the common Nucleus drivers via a common display */
- /* driver DLL. If your OS does not support shared memory (or if */
- /* the display driver does not need to allocate shared memory */
- /* for each process address space), this should just call PM_malloc. */
- return PM_malloc(size);
-}
-
-void PMAPI PM_freeShared(void *ptr)
-{
- /* TODO: Free the shared memory block. This will be called in the context */
- /* of the original calling process that allocated the shared */
- /* memory with PM_mallocShared. Simply call free if you do not */
- /* need this. */
- PM_free(ptr);
-}
-
-void * PMAPI PM_mapToProcess(void *base,ulong limit)
-{
- /* TODO: This function is used to map a physical memory mapping */
- /* previously allocated with PM_mapPhysicalAddr into the */
- /* address space of the calling process. If the memory mapping */
- /* allocated by PM_mapPhysicalAddr is global to all processes, */
- /* simply return the pointer. */
- return base;
-}
-
-void * PMAPI PM_mapRealPointer(uint r_seg,uint r_off)
-{
- /* No BIOS access on the BeOS */
- return NULL;
-}
-
-void * PMAPI PM_allocRealSeg(uint size,uint *r_seg,uint *r_off)
-{
- /* No BIOS access on the BeOS */
- return NULL;
-}
-
-void PMAPI PM_freeRealSeg(void *mem)
-{
- /* No BIOS access on the BeOS */
-}
-
-void PMAPI DPMI_int86(int intno, DPMI_regs *regs)
-{
- /* No BIOS access on the BeOS */
-}
-
-int PMAPI PM_int86(int intno, RMREGS *in, RMREGS *out)
-{
- /* No BIOS access on the BeOS */
- return 0;
-}
-
-int PMAPI PM_int86x(int intno, RMREGS *in, RMREGS *out,
- RMSREGS *sregs)
-{
- /* No BIOS access on the BeOS */
- return 0;
-}
-
-void PMAPI PM_callRealMode(uint seg,uint off, RMREGS *in,
- RMSREGS *sregs)
-{
- /* No BIOS access on the BeOS */
-}
-
-void PMAPI PM_availableMemory(ulong *physical,ulong *total)
-{
- /* TODO: Report the amount of available memory, both the amount of */
- /* physical memory left and the amount of virtual memory left. */
- /* If the OS does not provide these services, report 0's. */
- *physical = *total = 0;
-}
-
-void * PMAPI PM_allocLockedMem(uint size,ulong *physAddr,ibool contiguous,ibool below16Meg)
-{
- /* TODO: Allocate a block of locked, physical memory of the specified */
- /* size. This is used for bus master operations. If this is not */
- /* supported by the OS, return NULL and bus mastering will not */
- /* be used. */
- return NULL;
-}
-
-void PMAPI PM_freeLockedMem(void *p,uint size,ibool contiguous)
-{
- /* TODO: Free a memory block allocated with PM_allocLockedMem. */
-}
-
-void PMAPI PM_setBankA(int bank)
-{
- /* No BIOS access on the BeOS */
-}
-
-void PMAPI PM_setBankAB(int bank)
-{
- /* No BIOS access on the BeOS */
-}
-
-void PMAPI PM_setCRTStart(int x,int y,int waitVRT)
-{
- /* No BIOS access on the BeOS */
-}
-
-ibool PMAPI PM_enableWriteCombine(ulong base,ulong length,uint type)
-{
- /* TODO: This function should enable Pentium Pro and Pentium II MTRR */
- /* write combining for the passed in physical memory base address */
- /* and length. Normally this is done via calls to an OS specific */
- /* device driver as this can only be done at ring 0. */
- /* */
- /* NOTE: This is a *very* important function to implement! If you do */
- /* not implement, graphics performance on the latest Intel chips */
- /* will be severly impaired. For sample code that can be used */
- /* directly in a ring 0 device driver, see the MSDOS implementation */
- /* which includes assembler code to do this directly (if the */
- /* program is running at ring 0). */
- return false;
-}
-
-ibool PMAPI PM_doBIOSPOST(ushort axVal,ulong BIOSPhysAddr,void *mappedBIOS)
-{
- /* TODO: This function is used to run the BIOS POST code on a secondary */
- /* controller to initialise it for use. This is not necessary */
- /* for multi-controller operation, but it will make it a lot */
- /* more convenicent for end users (otherwise they have to boot */
- /* the system once with the secondary controller as primary, and */
- /* then boot with both controllers installed). */
- /* */
- /* Even if you don't support full BIOS access, it would be */
- /* adviseable to be able to POST the secondary controllers in the */
- /* system using this function as a minimum requirement. Some */
- /* graphics hardware has registers that contain values that only */
- /* the BIOS knows about, which makes bring up a card from cold */
- /* reset difficult if the BIOS has not POST'ed it. */
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-ulong PMAPI PM_findFirstFile(
- const char *filename,
- PM_findData *findData)
-{
- (void)filename;
- (void)findData;
- return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
- ulong handle,
- PM_findData *findData)
-{
- (void)handle;
- (void)findData;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
- ulong handle)
-{
- (void)handle;
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
- 1 - Drive A:
- 2 - Drive B:
- 3 - Drive C:
- etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
- char drive)
-{
- if (drive == 3)
- return true;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
- int drive,
- char *dir,
- int len)
-{
- (void)drive;
- getcwd(dir,len);
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
- const char *filename,
- uint attrib)
-{
- /* TODO: Set the file attributes for a file */
- (void)filename;
- (void)attrib;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/beos/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/beos/vflat.c
deleted file mode 100644
index 579ef2c95c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/beos/vflat.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-ibool PMAPI VF_available(void)
-{
- return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
- baseAddr = baseAddr;
- bankSize = bankSize;
- codeLen = codeLen;
- bankFunc = bankFunc;
- return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/beos/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/beos/ztimer.c
deleted file mode 100644
index a528b73177..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/beos/ztimer.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: *** TODO: ADD YOUR OS ENVIRONMENT NAME HERE ***
-*
-* Description: OS specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-void _ZTimerInit(void)
-{
- /* TODO: Do any specific internal initialisation in here */
-}
-
-/****************************************************************************
-REMARKS:
-Start the Zen Timer counting.
-****************************************************************************/
-static void _LZTimerOn(
- LZTimerObject *tm)
-{
- /* TODO: Start the Zen Timer counting. This should be a macro if */
- /* possible. */
-}
-
-/****************************************************************************
-REMARKS:
-Compute the lap time since the timer was started.
-****************************************************************************/
-static ulong _LZTimerLap(
- LZTimerObject *tm)
-{
- /* TODO: Compute the lap time between the current time and when the */
- /* timer was started. */
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Stop the Zen Timer counting.
-****************************************************************************/
-static void _LZTimerOff(
- LZTimerObject *tm)
-{
- /* TODO: Stop the timer counting. Should be a macro if possible. */
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time in microseconds between start and end timings.
-****************************************************************************/
-static ulong _LZTimerCount(
- LZTimerObject *tm)
-{
- /* TODO: Compute the elapsed time and return it. Always microseconds. */
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION 1
-
-/****************************************************************************
-REMARKS:
-Read the Long Period timer from the OS
-****************************************************************************/
-static ulong _ULZReadTime(void)
-{
- /* TODO: Read the long period timer from the OS. The resolution of this */
- /* timer should be around 1/20 of a second for timing long */
- /* periods if possible. */
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong _ULZElapsedTime(ulong start,ulong finish)
-{ return finish - start; }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/codepage/us_eng.c b/board/MAI/bios_emulator/scitech/src/pm/codepage/us_eng.c
deleted file mode 100644
index 9aa871423e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/codepage/us_eng.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Keyboard translation code pages for US English keyboards.
-*
-****************************************************************************/
-
-#include "event.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-/* This table is used for all normal key translations, and is the fallback
- * table if the key is not found in any of the other translation tables.
- * If the code is not found in this table, the ASCII code is set to 0 to
- * indicate that there is no ASCII code equivalent for this key.
- */
-static codepage_entry_t US_normal[] = {
- {0x01, 0x1B},
- {0x02, '1'},
- {0x03, '2'},
- {0x04, '3'},
- {0x05, '4'},
- {0x06, '5'},
- {0x07, '6'},
- {0x08, '7'},
- {0x09, '8'},
- {0x0A, '9'},
- {0x0B, '0'},
- {0x0C, '-'},
- {0x0D, '='},
- {0x0E, 0x08},
- {0x0F, 0x09},
- {0x10, 'q'},
- {0x11, 'w'},
- {0x12, 'e'},
- {0x13, 'r'},
- {0x14, 't'},
- {0x15, 'y'},
- {0x16, 'u'},
- {0x17, 'i'},
- {0x18, 'o'},
- {0x19, 'p'},
- {0x1A, '['},
- {0x1B, ']'},
- {0x1C, 0x0D},
- {0x1E, 'a'},
- {0x1F, 's'},
- {0x20, 'd'},
- {0x21, 'f'},
- {0x22, 'g'},
- {0x23, 'h'},
- {0x24, 'j'},
- {0x25, 'k'},
- {0x26, 'l'},
- {0x27, ';'},
- {0x28, '\''},
- {0x29, '`'},
- {0x2B, '\\'},
- {0x2C, 'z'},
- {0x2D, 'x'},
- {0x2E, 'c'},
- {0x2F, 'v'},
- {0x30, 'b'},
- {0x31, 'n'},
- {0x32, 'm'},
- {0x33, ','},
- {0x34, '.'},
- {0x35, '/'},
- {0x37, '*'}, /* Keypad */
- {0x39, ' '},
- {0x4A, '-'}, /* Keypad */
- {0x4E, '+'}, /* Keypad */
- {0x60, 0x0D}, /* Keypad */
- {0x61, '/'}, /* Keypad */
- };
-
-/* This table is used for when CAPSLOCK is active and the shift or ctrl
- * keys are not down. If the code is not found in this table, the normal
- * table above is then searched.
- */
-static codepage_entry_t US_caps[] = {
- {0x10, 'Q'},
- {0x11, 'W'},
- {0x12, 'E'},
- {0x13, 'R'},
- {0x14, 'T'},
- {0x15, 'Y'},
- {0x16, 'U'},
- {0x17, 'I'},
- {0x18, 'O'},
- {0x19, 'P'},
- {0x1E, 'A'},
- {0x1F, 'S'},
- {0x20, 'D'},
- {0x21, 'F'},
- {0x22, 'G'},
- {0x23, 'H'},
- {0x24, 'J'},
- {0x25, 'K'},
- {0x26, 'L'},
- {0x2C, 'Z'},
- {0x2D, 'X'},
- {0x2E, 'C'},
- {0x2F, 'V'},
- {0x30, 'B'},
- {0x31, 'N'},
- {0x32, 'M'},
- };
-
-/* This table is used for when shift key is down, but the ctrl key is not
- * down and CAPSLOCK is not active. If the code is not found in this table,
- * the normal table above is then searched.
- */
-static codepage_entry_t US_shift[] = {
- {0x02, '!'},
- {0x03, '@'},
- {0x04, '#'},
- {0x05, '$'},
- {0x06, '%'},
- {0x07, '^'},
- {0x08, '&'},
- {0x09, '*'},
- {0x0A, '('},
- {0x0B, ')'},
- {0x0C, '_'},
- {0x0D, '+'},
- {0x10, 'Q'},
- {0x11, 'W'},
- {0x12, 'E'},
- {0x13, 'R'},
- {0x14, 'T'},
- {0x15, 'Y'},
- {0x16, 'U'},
- {0x17, 'I'},
- {0x18, 'O'},
- {0x19, 'P'},
- {0x1A, '{'},
- {0x1B, '}'},
- {0x1E, 'A'},
- {0x1F, 'S'},
- {0x20, 'D'},
- {0x21, 'F'},
- {0x22, 'G'},
- {0x23, 'H'},
- {0x24, 'J'},
- {0x25, 'K'},
- {0x26, 'L'},
- {0x27, ':'},
- {0x28, '"'},
- {0x29, '~'},
- {0x2B, '|'},
- {0x2C, 'Z'},
- {0x2D, 'X'},
- {0x2E, 'C'},
- {0x2F, 'V'},
- {0x30, 'B'},
- {0x31, 'N'},
- {0x32, 'M'},
- {0x33, '<'},
- {0x34, '>'},
- {0x35, '?'},
- };
-
-/* This table is used for when CAPSLOCK is active and the shift key is
- * down, but the ctrl key is not. If the code is not found in this table,
- * the shift table above is then searched.
- */
-static codepage_entry_t US_shiftCaps[] = {
- {0x10, 'q'},
- {0x11, 'w'},
- {0x12, 'e'},
- {0x13, 'r'},
- {0x14, 't'},
- {0x15, 'y'},
- {0x16, 'u'},
- {0x17, 'i'},
- {0x18, 'o'},
- {0x19, 'p'},
- {0x1E, 'a'},
- {0x1F, 's'},
- {0x20, 'd'},
- {0x21, 'f'},
- {0x22, 'g'},
- {0x23, 'h'},
- {0x24, 'j'},
- {0x25, 'k'},
- {0x26, 'l'},
- {0x2C, 'z'},
- {0x2D, 'x'},
- {0x2E, 'c'},
- {0x2F, 'v'},
- {0x30, 'b'},
- {0x31, 'n'},
- {0x32, 'm'},
- };
-
-/* This table is used for all key translations when the ctrl key is down,
- * regardless of the state of the shift key and CAPSLOCK. If the code is
- * not found in this table, the ASCII code is set to 0 to indicate that
- * there is no ASCII code equivalent for this key.
- */
-static codepage_entry_t US_ctrl[] = {
- {0x01, 0x1B},
- {0x06, 0x1E},
- {0x0C, 0x1F},
- {0x0E, 0x7F},
- {0x10, 0x11},
- {0x11, 0x17},
- {0x12, 0x05},
- {0x13, 0x12},
- {0x14, 0x14},
- {0x15, 0x19},
- {0x16, 0x16},
- {0x17, 0x09},
- {0x18, 0x0F},
- {0x19, 0x10},
- {0x1A, 0x1B},
- {0x1B, 0x1D},
- {0x1C, 0x0A},
- {0x1E, 0x01},
- {0x1F, 0x13},
- {0x20, 0x04},
- {0x21, 0x06},
- {0x22, 0x07},
- {0x23, 0x08},
- {0x24, 0x0A},
- {0x25, 0x0B},
- {0x26, 0x0C},
- {0x2B, 0x1C},
- {0x2C, 0x1A},
- {0x2D, 0x18},
- {0x2E, 0x03},
- {0x2F, 0x16},
- {0x30, 0x02},
- {0x31, 0x0E},
- {0x32, 0x0D},
- {0x39, ' '},
- };
-
-static codepage_entry_t US_numPad[] = {
- {0x4C, '5'},
- {0x62, '4'},
- {0x63, '6'},
- {0x64, '8'},
- {0x65, '2'},
- {0x66, '0'},
- {0x67, '.'},
- {0x68, '7'},
- {0x69, '1'},
- {0x6A, '9'},
- {0x6B, '3'},
- };
-
-codepage_t _CP_US_English = {
- "US English",
- US_normal, EVT_ARR_SIZE(US_normal),
- US_caps, EVT_ARR_SIZE(US_caps),
- US_shift, EVT_ARR_SIZE(US_shift),
- US_shiftCaps, EVT_ARR_SIZE(US_shiftCaps),
- US_ctrl, EVT_ARR_SIZE(US_ctrl),
- US_numPad, EVT_ARR_SIZE(US_numPad),
- };
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common.c b/board/MAI/bios_emulator/scitech/src/pm/common.c
deleted file mode 100644
index d5a8e8f1c7..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common.c
+++ /dev/null
@@ -1,480 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Module containing code common to all platforms.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#if defined(__WIN32_VXD__) || defined(__OS2_VDD__) || defined(__NT_DRIVER__)
-#include "sdd/sddhelp.h"
-#else
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#endif
-
-/*---------------------------- Global variables ---------------------------*/
-
-/* {secret} */
-long _VARAPI ___drv_os_type = _OS_UNSUPPORTED;
-static char localBPDPath[PM_MAX_PATH] = "";
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-path - Local path to the Nucleus BPD driver files.
-
-REMARKS:
-This function is used by the application program to override the location
-of the Nucleus driver files that are loaded. Normally the loader code
-will look in the system Nucleus directories first, then in the 'drivers'
-directory relative to the current working directory, and finally relative
-to the MGL_ROOT environment variable. By default the local BPD path is
-always set to the current directory if not initialised.
-****************************************************************************/
-void PMAPI PM_setLocalBPDPath(
- const char *path)
-{
- PM_init();
- strncpy(localBPDPath,path,sizeof(localBPDPath));
- localBPDPath[sizeof(localBPDPath)-1] = 0;
-}
-
-/****************************************************************************
-PARAMETERS:
-bpdpath - Place to store the actual path to the file
-cachedpath - Place to store the cached BPD driver path
-trypath - Path to try to find the BPD file in
-subpath - Optional sub path to append to trypath
-dllname - Name of the Binary Portable DLL to load
-
-RETURNS:
-True if found, false if not.
-
-REMARKS:
-Trys the specified path to see if the BPD file can be found or not. If so,
-the path used is returned in bpdpath and cachedpath.
-****************************************************************************/
-static ibool TryPath(
- char *bpdpath,
- char *cachedpath,
- const char *trypath,
- const char *subpath,
- const char *dllname)
-{
- char filename[256];
- FILE *f;
-
- strcpy(bpdpath, trypath);
- PM_backslash(bpdpath);
- strcat(bpdpath,subpath);
- PM_backslash(bpdpath);
- strcpy(filename,bpdpath);
- strcat(filename,dllname);
- if ((f = fopen(filename,"rb")) == NULL)
- return false;
- if (cachedpath)
- strcpy(cachedpath,bpdpath);
- fclose(f);
- return true;
-}
-
-/****************************************************************************
-RETURNS:
-True if local override enabled, false if not.
-
-REMARKS:
-Tests to see if the local override option is enabled, and if so it will
-look for the Nucleus drivers in the local application directories in
-preference to the Nucleus system directories.
-****************************************************************************/
-static ibool GetLocalOverride(void)
-{
- char filename[256];
- FILE *f;
- static ibool local_override = -1;
-
- if (local_override == -1) {
- local_override = false;
- strcpy(filename,PM_getNucleusPath());
- PM_backslash(filename);
- strcat(filename,"graphics.ini");
- if ((f = fopen(filename,"r")) != NULL) {
- while (!feof(f) && fgets(filename,sizeof(filename),f)) {
- if (strnicmp(filename,"uselocal",8) == 0) {
- local_override = ((*(filename+9) - '0') == 1);
- break;
- }
- }
- fclose(f);
- }
- }
- return local_override;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Sets the location of the debug log file.
-
-HEADER:
-pmapi.h
-
-PARAMETERS:
-dllname - Name of the Binary Portable DLL to load
-bpdpath - Place to store the actual path to the file
-
-RETURNS:
-True if found, false if not.
-
-REMARKS:
-Finds the location of a specific Binary Portable DLL, by searching all
-the standard SciTech Nucleus driver locations.
-****************************************************************************/
-ibool PMAPI PM_findBPD(
- const char *dllname,
- char *bpdpath)
-{
- static char cachedpath[PM_MAX_PATH] = "";
-
- /* On the first call determine the path to the Nucleus drivers */
- if (cachedpath[0] == 0) {
- /* First try in the global system Nucleus driver path if
- * the local override setting is not enabled.
- */
- PM_init();
- if (!GetLocalOverride()) {
- if (TryPath(bpdpath,cachedpath,PM_getNucleusPath(),"",dllname))
- return true;
- }
-
- /* Next try in the local application directory if available */
- if (localBPDPath[0] != 0) {
- if (TryPath(bpdpath,cachedpath,localBPDPath,"",dllname))
- return true;
- }
- else {
-#if !defined(__WIN32_VXD__) && !defined(__NT_DRIVER__)
- char *mgl_root;
- if ((mgl_root = getenv("MGL_ROOT")) != NULL) {
- if (TryPath(bpdpath,cachedpath,mgl_root,"drivers",dllname))
- return true;
- }
-#endif
- PM_getCurrentPath(bpdpath,PM_MAX_PATH);
- if (TryPath(bpdpath,cachedpath,bpdpath,"drivers",dllname))
- return true;
- }
-
- /* Finally try in the global system path again so that we
- * will still find the drivers in the global system path if
- * the local override option is on, but the application does
- * not have any local override drivers.
- */
- if (TryPath(bpdpath,cachedpath,PM_getNucleusPath(),"",dllname))
- return true;
-
- /* Whoops, we can't find the BPD file! */
- return false;
- }
-
- /* Always try in the previously discovered path */
- return TryPath(bpdpath,NULL,cachedpath,"",dllname);
-}
-
-/****************************************************************************
-REMARKS:
-Copies a string into another, and returns dest + strlen(src).
-****************************************************************************/
-static char *_stpcpy(
- char *_dest,
- const char *_src)
-{
- if (!_dest || !_src)
- return 0;
- while ((*_dest++ = *_src++) != 0)
- ;
- return --_dest;
-}
-
-/****************************************************************************
-REMARKS:
-Copies a string into another, stopping at the maximum length. The string
-is properly terminated (unlike strncpy).
-****************************************************************************/
-static void safe_strncpy(
- char *dst,
- const char *src,
- unsigned maxlen)
-{
- if (dst) {
- if(strlen(src) >= maxlen) {
- strncpy(dst, src, maxlen);
- dst[maxlen] = 0;
- }
- else
- strcpy(dst, src);
- }
-}
-
-/****************************************************************************
-REMARKS:
-Determins if the dot separator is present in the string.
-****************************************************************************/
-static int findDot(
- char *p)
-{
- if (*(p-1) == '.')
- p--;
- switch (*--p) {
- case ':':
- if (*(p-2) != '\0')
- break;
- case '/':
- case '\\':
- case '\0':
- return true;
- }
- return false;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Make a full pathname from split components.
-
-HEADER:
-pmapi.h
-
-PARAMETERS:
-path - Place to store full path
-drive - Drive component for path
-dir - Directory component for path
-name - Filename component for path
-ext - Extension component for path
-
-REMARKS:
-Function to make a full pathname from split components. Under Unix the
-drive component will usually be empty. If the drive, dir, name, or ext
-parameters are null or empty, they are not inserted in the path string.
-Otherwise, if the drive doesn't end with a colon, one is inserted in the
-path. If the dir doesn't end in a slash, one is inserted in the path.
-If the ext doesn't start with a dot, one is inserted in the path.
-
-The maximum sizes for the path string is given by the constant PM_MAX_PATH,
-which includes space for the null-terminator.
-
-SEE ALSO:
-PM_splitPath
-****************************************************************************/
-void PMAPI PM_makepath(
- char *path,
- const char *drive,
- const char *dir,
- const char *name,
- const char *ext)
-{
- if (drive && *drive) {
- *path++ = *drive;
- *path++ = ':';
- }
- if (dir && *dir) {
- path = _stpcpy(path,dir);
- if (*(path-1) != '\\' && *(path-1) != '/')
-#ifdef __UNIX__
- *path++ = '/';
-#else
- *path++ = '\\';
-#endif
- }
- if (name)
- path = _stpcpy(path,name);
- if (ext && *ext) {
- if (*ext != '.')
- *path++ = '.';
- path = _stpcpy(path,ext);
- }
- *path = 0;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Split a full pathname into components.
-
-HEADER:
-pmapi.h
-
-PARAMETERS:
-path - Full path to split
-drive - Drive component for path
-dir - Directory component for path
-name - Filename component for path
-ext - Extension component for path
-
-RETURNS:
-Flags indicating what components were parsed.
-
-REMARKS:
-Function to split a full pathmame into separate components in the form
-
- X:\DIR\SUBDIR\NAME.EXT
-
-and splits path into its four components. It then stores those components
-in the strings pointed to by drive, dir, name and ext. (Each component is
-required but can be a NULL, which means the corresponding component will be
-parsed but not stored).
-
-The maximum sizes for these strings are given by the constants PM_MAX_DRIVE
-and PM_MAX_PATH. PM_MAX_DRIVE is always 4, and PM_MAX_PATH is usually at
-least 256 characters. Under Unix the dir, name and ext components may be
-up to the full path in length.
-
-SEE ALSO:
-PM_makePath
-****************************************************************************/
-int PMAPI PM_splitpath(
- const char *path,
- char *drive,
- char *dir,
- char *name,
- char *ext)
-{
- char *p;
- int temp,ret;
- char buf[PM_MAX_PATH+2];
-
- /* Set all string to default value zero */
- ret = 0;
- if (drive) *drive = 0;
- if (dir) *dir = 0;
- if (name) *name = 0;
- if (ext) *ext = 0;
-
- /* Copy filename into template up to PM_MAX_PATH characters */
- p = buf;
- if ((temp = strlen(path)) > PM_MAX_PATH)
- temp = PM_MAX_PATH;
- *p++ = 0;
- strncpy(p, path, temp);
- *(p += temp) = 0;
-
- /* Split the filename and fill corresponding nonzero pointers */
- temp = 0;
- for (;;) {
- switch (*--p) {
- case '.':
- if (!temp && (*(p+1) == '\0'))
- temp = findDot(p);
- if ((!temp) && ((ret & PM_HAS_EXTENSION) == 0)) {
- ret |= PM_HAS_EXTENSION;
- safe_strncpy(ext, p, PM_MAX_PATH - 1);
- *p = 0;
- }
- continue;
- case ':':
- if (p != &buf[2])
- continue;
- case '\0':
- if (temp) {
- if (*++p)
- ret |= PM_HAS_DIRECTORY;
- safe_strncpy(dir, p, PM_MAX_PATH - 1);
- *p-- = 0;
- break;
- }
- case '/':
- case '\\':
- if (!temp) {
- temp++;
- if (*++p)
- ret |= PM_HAS_FILENAME;
- safe_strncpy(name, p, PM_MAX_PATH - 1);
- *p-- = 0;
- if (*p == 0 || (*p == ':' && p == &buf[2]))
- break;
- }
- continue;
- case '*':
- case '?':
- if (!temp)
- ret |= PM_HAS_WILDCARDS;
- default:
- continue;
- }
- break;
- }
- if (*p == ':') {
- if (buf[1])
- ret |= PM_HAS_DRIVE;
- safe_strncpy(drive, &buf[1], PM_MAX_DRIVE - 1);
- }
- return ret;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Block until a specific time has elapsed since the last call
-
-HEADER:
-pmapi.h
-
-PARAMETERS:
-milliseconds - Number of milliseconds for delay
-
-REMARKS:
-This function will block the calling thread or process until the specified
-number of milliseconds have passed since the /last/ call to this function.
-The first time this function is called, it will return immediately. On
-subsquent calls it will block until the specified time has elapsed, or it
-will return immediately if the time has already elapsed.
-
-This function is useful to provide constant time functionality in a
-program, such as a frame rate limiter for graphics applications etc.
-
-SEE ALSO:
-PM_sleep
-****************************************************************************/
-void PMAPI PM_blockUntilTimeout(
- ulong milliseconds)
-{
- ulong microseconds = milliseconds * 1000L,msDelay;
- static LZTimerObject tm;
- static ibool firstTime = true;
-
- if (firstTime) {
- firstTime = false;
- LZTimerOnExt(&tm);
- }
- else {
- if ((msDelay = (microseconds - LZTimerLapExt(&tm)) / 1000L) > 0)
- PM_sleep(msDelay);
- while (LZTimerLapExt(&tm) < microseconds)
- ;
- LZTimerOffExt(&tm);
- LZTimerOnExt(&tm);
- }
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/_cpuinfo.asm b/board/MAI/bios_emulator/scitech/src/pm/common/_cpuinfo.asm
deleted file mode 100644
index 60ebed713f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/_cpuinfo.asm
+++ /dev/null
@@ -1,600 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Language: NASM or TASM Assembler
-;* Environment: Intel 32 bit Protected Mode.
-;*
-;* Description: Code to determine the Intel processor type.
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac"
-
-header _cpuinfo
-
-begdataseg _cpuinfo ; Start of data segment
-
-cache_id db "01234567890123456"
-intel_id db "GenuineIntel" ; Intel vendor ID
-cyrix_id db "CyrixInstead" ; Cyrix vendor ID
-amd_id db "AuthenticAMD" ; AMD vendor ID
-idt_id db "CentaurHauls" ; IDT vendor ID
-
-CPU_IDT EQU 01000h ; Flag for IDT processors
-CPU_Cyrix EQU 02000h ; Flag for Cyrix processors
-CPU_AMD EQU 04000h ; Flag for AMD processors
-CPU_Intel EQU 08000h ; Flag for Intel processors
-
-enddataseg _cpuinfo
-
-begcodeseg _cpuinfo ; Start of code segment
-
-ifdef USE_NASM
-%macro mCPU_ID 0
-db 00Fh,0A2h
-%endmacro
-else
-MACRO mCPU_ID
-db 00Fh,0A2h
-ENDM
-endif
-
-ifdef USE_NASM
-%macro mRDTSC 0
-db 00Fh,031h
-%endmacro
-else
-MACRO mRDTSC
-db 00Fh,031h
-ENDM
-endif
-
-;----------------------------------------------------------------------------
-; bool _CPU_check80386(void)
-;----------------------------------------------------------------------------
-; Determines if we have an i386 processor.
-;----------------------------------------------------------------------------
-cprocstart _CPU_check80386
-
- enter_c
-
- xor edx,edx ; EDX = 0, not an 80386
- mov bx, sp
-ifdef USE_NASM
- and sp, ~3
-else
- and sp, not 3
-endif
- pushfd ; Push original EFLAGS
- pop eax ; Get original EFLAGS
- mov ecx, eax ; Save original EFLAGS
- xor eax, 40000h ; Flip AC bit in EFLAGS
- push eax ; Save new EFLAGS value on
- ; stack
- popfd ; Replace current EFLAGS value
- pushfd ; Get new EFLAGS
- pop eax ; Store new EFLAGS in EAX
- xor eax, ecx ; Can't toggle AC bit,
- ; processor=80386
- jnz @@Done ; Jump if not an 80386 processor
- inc edx ; We have an 80386
-
-@@Done: push ecx
- popfd
- mov sp, bx
- mov eax, edx
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; bool _CPU_check80486(void)
-;----------------------------------------------------------------------------
-; Determines if we have an i486 processor.
-;----------------------------------------------------------------------------
-cprocstart _CPU_check80486
-
- enter_c
-
-; Distinguish between the i486 and Pentium by the ability to set the ID flag
-; in the EFLAGS register. If the ID flag is set, then we can use the CPUID
-; instruction to determine the final version of the chip. Otherwise we
-; simply have an 80486.
-
-; Distinguish between the i486 and Pentium by the ability to set the ID flag
-; in the EFLAGS register. If the ID flag is set, then we can use the CPUID
-; instruction to determine the final version of the chip. Otherwise we
-; simply have an 80486.
-
- pushfd ; Get original EFLAGS
- pop eax
- mov ecx, eax
- xor eax, 200000h ; Flip ID bit in EFLAGS
- push eax ; Save new EFLAGS value on stack
- popfd ; Replace current EFLAGS value
- pushfd ; Get new EFLAGS
- pop eax ; Store new EFLAGS in EAX
- xor eax, ecx ; Can not toggle ID bit,
- jnz @@1 ; Processor=80486
- mov eax,1 ; We dont have a Pentium
- jmp @@Done
-@@1: mov eax,0 ; We have Pentium or later
-@@Done: leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; bool _CPU_checkClone(void)
-;----------------------------------------------------------------------------
-; Checks if the i386 or i486 processor is a clone or genuine Intel.
-;----------------------------------------------------------------------------
-cprocstart _CPU_checkClone
-
- enter_c
-
- mov ax,5555h ; Check to make sure this is a 32-bit processor
- xor dx,dx
- mov cx,2h
- div cx ; Perform Division
- clc
- jnz @@NoClone
- jmp @@Clone
-@@NoClone:
- stc
-@@Clone:
- pushfd
- pop eax ; Get the flags
- and eax,1
- xor eax,1 ; EAX=0 is probably Intel, EAX=1 is a Clone
-
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; bool _CPU_haveCPUID(void)
-;----------------------------------------------------------------------------
-; Determines if we have support for the CPUID instruction.
-;----------------------------------------------------------------------------
-cprocstart _CPU_haveCPUID
-
- enter_c
-
-ifdef flatmodel
- pushfd ; Get original EFLAGS
- pop eax
- mov ecx, eax
- xor eax, 200000h ; Flip ID bit in EFLAGS
- push eax ; Save new EFLAGS value on stack
- popfd ; Replace current EFLAGS value
- pushfd ; Get new EFLAGS
- pop eax ; Store new EFLAGS in EAX
- xor eax, ecx ; Can not toggle ID bit,
- jnz @@1 ; Processor=80486
- mov eax,0 ; We dont have CPUID support
- jmp @@Done
-@@1: mov eax,1 ; We have CPUID support
-else
- mov eax,0 ; CPUID requires 32-bit pmode
-endif
-@@Done: leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uint _CPU_checkCPUID(void)
-;----------------------------------------------------------------------------
-; Determines the CPU type using the CPUID instruction.
-;----------------------------------------------------------------------------
-cprocstart _CPU_checkCPUID
-
- enter_c
-
- xor eax, eax ; Set up for CPUID instruction
- mCPU_ID ; Get and save vendor ID
- cmp eax, 1 ; Make sure 1 is valid input for CPUID
- jl @@Fail ; We dont have the CPUID instruction
- xor eax,eax ; Assume vendor is unknown
-
-; Check for GenuineIntel processors
-
- LEA_L esi,intel_id
- cmp [DWORD esi], ebx
- jne @@NotIntel
- cmp [DWORD esi+4], edx
- jne @@NotIntel
- cmp [DWORD esi+8], ecx
- jne @@NotIntel
- mov eax,CPU_Intel ; Flag that we have GenuineIntel
- jmp @@FoundVendor
-
-; Check for CyrixInstead processors
-
-@@NotIntel:
- LEA_L esi,cyrix_id
- cmp [DWORD esi], ebx
- jne @@NotCyrix
- cmp [DWORD esi+4], edx
- jne @@NotCyrix
- cmp [DWORD esi+8], ecx
- jne @@NotCyrix
- mov eax,CPU_Cyrix ; Flag that we have CyrixInstead
- jmp @@FoundVendor
-
-; Check for AuthenticAMD processors
-
-@@NotCyrix:
- LEA_L esi,amd_id
- cmp [DWORD esi], ebx
- jne @@NotAMD
- cmp [DWORD esi+4], edx
- jne @@NotAMD
- cmp [DWORD esi+8], ecx
- jne @@NotAMD
- mov eax,CPU_AMD ; Flag that we have AuthenticAMD
- jmp @@FoundVendor
-
-; Check for CentaurHauls processors
-
-@@NotAMD:
- LEA_L esi,idt_id
- cmp [DWORD esi], ebx
- jne @@NotIDT
- cmp [DWORD esi+4], edx
- jne @@NotIDT
- cmp [DWORD esi+8], ecx
- jne @@NotIDT
- mov eax,CPU_IDT ; Flag that we have AuthenticIDT
- jmp @@FoundVendor
-
-@@NotIDT:
-
-@@FoundVendor:
- push eax
- xor eax, eax
- inc eax
- mCPU_ID ; Get family/model/stepping/features
- and eax, 0F00h
- shr eax, 8 ; Isolate family
- and eax, 0Fh
- pop ecx
- or eax,ecx ; Combine in the clone flag
-@@Done: leave_c
- ret
-
-@@Fail: xor eax,eax
- jmp @@Done
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uint _CPU_getCPUIDModel(void)
-;----------------------------------------------------------------------------
-; Determines the CPU type using the CPUID instruction.
-;----------------------------------------------------------------------------
-cprocstart _CPU_getCPUIDModel
-
- enter_c
-
- xor eax, eax ; Set up for CPUID instruction
- mCPU_ID ; Get and save vendor ID
- cmp eax, 1 ; Make sure 1 is valid input for CPUID
- jl @@Fail ; We dont have the CPUID instruction
- xor eax, eax
- inc eax
- mCPU_ID ; Get family/model/stepping/features
- and eax, 0F0h
- shr eax, 4 ; Isolate model
-@@Done: leave_c
- ret
-
-@@Fail: xor eax,eax
- jmp @@Done
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uint _CPU_getCPUIDStepping(void)
-;----------------------------------------------------------------------------
-; Determines the CPU type using the CPUID instruction.
-;----------------------------------------------------------------------------
-cprocstart _CPU_getCPUIDStepping
-
- enter_c
-
- xor eax, eax ; Set up for CPUID instruction
- mCPU_ID ; Get and save vendor ID
- cmp eax, 1 ; Make sure 1 is valid input for CPUID
- jl @@Fail ; We dont have the CPUID instruction
- xor eax, eax
- inc eax
- mCPU_ID ; Get family/model/stepping/features
- and eax, 00Fh ; Isolate stepping
-@@Done: leave_c
- ret
-
-@@Fail: xor eax,eax
- jmp @@Done
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uint _CPU_getCPUIDFeatures(void)
-;----------------------------------------------------------------------------
-; Determines the CPU type using the CPUID instruction.
-;----------------------------------------------------------------------------
-cprocstart _CPU_getCPUIDFeatures
-
- enter_c
-
- xor eax, eax ; Set up for CPUID instruction
- mCPU_ID ; Get and save vendor ID
- cmp eax, 1 ; Make sure 1 is valid input for CPUID
- jl @@Fail ; We dont have the CPUID instruction
- xor eax, eax
- inc eax
- mCPU_ID ; Get family/model/stepping/features
- mov eax, edx
-@@Done: leave_c
- ret
-
-@@Fail: xor eax,eax
- jmp @@Done
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uint _CPU_getCacheSize(void)
-;----------------------------------------------------------------------------
-; Determines the CPU cache size for Intel processors
-;----------------------------------------------------------------------------
-cprocstart _CPU_getCacheSize
-
- enter_c
- xor eax, eax ; Set up for CPUID instruction
- mCPU_ID ; Get and save vendor ID
- cmp eax,2 ; Make sure 2 is valid input for CPUID
- jl @@Fail ; We dont have the CPUID instruction
- mov eax,2
- mCPU_ID ; Get cache descriptors
- LEA_L esi,cache_id ; Get address of cache ID (-fPIC aware)
- shr eax,8
- mov [esi+0],eax
- mov [esi+3],ebx
- mov [esi+7],ecx
- mov [esi+11],edx
- xor eax,eax
- LEA_L esi,cache_id ; Get address of cache ID (-fPIC aware)
- mov edi,15
-@@ScanLoop:
- cmp [BYTE esi],41h
- mov eax,128
- je @@Done
- cmp [BYTE esi],42h
- mov eax,256
- je @@Done
- cmp [BYTE esi],43h
- mov eax,512
- je @@Done
- cmp [BYTE esi],44h
- mov eax,1024
- je @@Done
- cmp [BYTE esi],45h
- mov eax,2048
- je @@Done
- inc esi
- dec edi
- jnz @@ScanLoop
-
-@@Done: leave_c
- ret
-
-@@Fail: xor eax,eax
- jmp @@Done
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uint _CPU_have3DNow(void)
-;----------------------------------------------------------------------------
-; Determines the CPU type using the CPUID instruction.
-;----------------------------------------------------------------------------
-cprocstart _CPU_have3DNow
-
- enter_c
-
- mov eax,80000000h ; Query for extended functions
- mCPU_ID ; Get extended function limit
- cmp eax,80000001h
- jbe @@Fail ; Nope, we dont have function 800000001h
- mov eax,80000001h ; Setup extended function 800000001h
- mCPU_ID ; and get the information
- test edx,80000000h ; Bit 31 is set if 3DNow! present
- jz @@Fail ; Nope, we dont have 3DNow support
- mov eax,1 ; Yep, we have 3DNow! support!
-@@Done: leave_c
- ret
-
-@@Fail: xor eax,eax
- jmp @@Done
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong _CPU_quickRDTSC(void)
-;----------------------------------------------------------------------------
-; Reads the time stamp counter and returns the low order 32-bits
-;----------------------------------------------------------------------------
-cprocstart _CPU_quickRDTSC
-
- mRDTSC
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _CPU_runBSFLoop(ulong interations)
-;----------------------------------------------------------------------------
-; Runs a loop of BSF instructions for the specified number of iterations
-;----------------------------------------------------------------------------
-cprocstart _CPU_runBSFLoop
-
- ARG iterations:ULONG
-
- push _bp
- mov _bp,_sp
- push _bx
-
- mov edx,[iterations]
- mov eax,80000000h
- mov ebx,edx
-
- ALIGN 4
-
-@@loop: bsf ecx,eax
- dec ebx
- jnz @@loop
-
- pop _bx
- pop _bp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _CPU_readTimeStamp(CPU_largeInteger *time);
-;----------------------------------------------------------------------------
-; Reads the time stamp counter and returns the 64-bit result.
-;----------------------------------------------------------------------------
-cprocstart _CPU_readTimeStamp
-
- mRDTSC
- mov ecx,[esp+4] ; Access directly without stack frame
- mov [ecx],eax
- mov [ecx+4],edx
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong _CPU_diffTime64(CPU_largeInteger *t1,CPU_largeInteger *t2,CPU_largeInteger *t)
-;----------------------------------------------------------------------------
-; Computes the difference between two 64-bit numbers.
-;----------------------------------------------------------------------------
-cprocstart _CPU_diffTime64
-
- ARG t1:DPTR, t2:DPTR, t:DPTR
-
- enter_c
-
- mov ecx,[t2]
- mov eax,[ecx] ; EAX := t2.low
- mov ecx,[t1]
- sub eax,[ecx]
- mov edx,eax ; EDX := low difference
- mov ecx,[t2]
- mov eax,[ecx+4] ; ECX := t2.high
- mov ecx,[t1]
- sbb eax,[ecx+4] ; EAX := high difference
-
- mov ebx,[t] ; Store the result
- mov [ebx],edx ; Store low part
- mov [ebx+4],eax ; Store high part
- mov eax,edx ; Return low part
-ifndef flatmodel
- shld edx,eax,16 ; Return in DX:AX
-endif
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong _CPU_calcMicroSec(CPU_largeInteger *count,ulong freq);
-;----------------------------------------------------------------------------
-; Computes the value in microseconds for the elapsed time with maximum
-; precision. The formula we use is:
-;
-; us = (((diff * 0x100000) / freq) * 1000000) / 0x100000)
-;
-; The power of two multiple before the first divide allows us to scale the
-; 64-bit difference using simple shifts, and then the divide brings the
-; final result into the range to fit into a 32-bit integer.
-;----------------------------------------------------------------------------
-cprocstart _CPU_calcMicroSec
-
- ARG count:DPTR, freq:ULONG
-
- enter_c
-
- mov ecx,[count]
- mov eax,[ecx] ; EAX := low part
- mov edx,[ecx+4] ; EDX := high part
- shld edx,eax,20
- shl eax,20 ; diff * 0x100000
- div [DWORD freq] ; (diff * 0x100000) / freq
- mov ecx,1000000
- xor edx,edx
- mul ecx ; ((diff * 0x100000) / freq) * 1000000)
- shrd eax,edx,20 ; ((diff * 0x100000) / freq) * 1000000) / 0x100000
-ifndef flatmodel
- shld edx,eax,16 ; Return in DX:AX
-endif
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong _CPU_mulDiv(ulong a,ulong b,ulong c);
-;----------------------------------------------------------------------------
-; Computes the following with 64-bit integer precision:
-;
-; result = (a * b) / c
-;
-;----------------------------------------------------------------------------
-cprocstart _CPU_mulDiv
-
- ARG a:ULONG, b:ULONG, c:ULONG
-
- enter_c
- mov eax,[a]
- imul [ULONG b]
- idiv [ULONG c]
-ifndef flatmodel
- shld edx,eax,16 ; Return in DX:AX
-endif
- leave_c
- ret
-
-cprocend
-
-endcodeseg _cpuinfo
-
- END
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/_dma.asm b/board/MAI/bios_emulator/scitech/src/pm/common/_dma.asm
deleted file mode 100644
index 2b6e1e8b56..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/_dma.asm
+++ /dev/null
@@ -1,246 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Language: 80386 Assembler, TASM 4.0 or NASM
-;* Environment: 16/32 bit Ring 0 device driver
-;*
-;* Description: Assembler support routines for ISA DMA controller.
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac" ; Memory model macros
-
-header _dma ; Set up memory model
-
-begdataseg _dma ; Start of data segment
-
-cpublic _PM_DMADataStart
-
-; DMA register I/O addresses for channels 0-7 (except 4)
-
-DMAC_page db 087h,083h,081h,082h, -1,08Bh,089h,08Ah
-DMAC_addr db 000h,002h,004h,006h, -1,0C4h,0C8h,0CCh
-DMAC_cnt db 001h,003h,005h,007h, -1,0C6h,0CAh,0CEh
-DMAC_mask db 00Ah,00Ah,00Ah,00Ah, -1,0D4h,0D4h,0D4h
-DMAC_mode db 00Bh,00Bh,00Bh,00Bh, -1,0D6h,0D6h,0D6h
-DMAC_FF db 00Ch,00Ch,00Ch,00Ch, -1,0D8h,0D8h,0D8h
-
-cpublic _PM_DMADataEnd
-
-enddataseg _dma
-
-begcodeseg _dma ; Start of code segment
-
-ifdef flatmodel
-
-cpublic _PM_DMACodeStart
-
-;----------------------------------------------------------------------------
-; void PM_DMACDisable(int channel);
-;----------------------------------------------------------------------------
-; Masks DMA channel, inhibiting DMA transfers
-;----------------------------------------------------------------------------
-cprocstart PM_DMACDisable
-
- ARG channel:UINT
-
- push ebp
- mov ebp,esp
- mov ecx,[channel] ; ECX indexes DMAC register tables
- mov dh,0 ; DH = 0 for DMAC register port access
- mov al,cl
- and al,11b
- or al,100b ; AL = (channel & 3) | "set mask bit"
- mov dl,[DMAC_mask+ecx]
- out dx,al
- pop ebp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_DMACEnable(int channel);
-;----------------------------------------------------------------------------
-; Unmasks DMA channel, enabling DMA transfers
-;----------------------------------------------------------------------------
-cprocstart PM_DMACEnable
-
- ARG channel:UINT
-
- push ebp
- mov ebp,esp
- mov ecx,[channel] ; ECX indexes DMAC register tables
- mov dh,0 ; DH = 0 for DMAC register port access
- mov al,cl
- and al,11b ; AL = (channel & 3), "set mask bit"=0
- mov dl,[DMAC_mask+ecx]
- out dx,al
- pop ebp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_DMACProgram(int channel,int mode,ulong bufferPhys,int count);
-;----------------------------------------------------------------------------
-; Purpose: Program DMA controller to perform transfer from first 16MB
-; based on previously selected mode and channel. DMA transfer may be enabled
-; by subsequent call to PM_DMACEnable.
-;
-; Entry: channel - DMA channel in use (0-7)
-; mode - Selected DMAMODE type for transfer
-; buffer - 32-bit physical address of DMA buffer
-; count - DMA byte count (1-65536 bytes)
-;----------------------------------------------------------------------------
-cprocstart PM_DMACProgram
-
- ARG channel:UINT, mode:UINT, bufferPhys:ULONG, count:UINT
-
- enter_c
- pushfd
- cli ; Disable interrupts
-
-; Mask DMA channel to disable it
-
- mov ebx,[channel] ; EBX indexes DMAC register tables
- mov dh,0 ; DH = 0 for DMAC register port access
- mov al,bl
- and al,11b
- or al,100b ; AL = (channel & 3) | "set mask bit"
- mov dl,[DMAC_mask+ebx]
- out dx,al
-
-; Generate IOW to clear FF toggle state
-
- mov al,0
- mov dl,[DMAC_FF+ebx]
- out dx,al
-
-; Compute buffer address to program
-
- mov eax,[bufferPhys] ; AX := DMA address offset
- mov ecx,eax
- shr ecx,16 ; CL := bufferPhys >> 16 (DMA page)
- mov esi,[count] ; ESI = # of bytes to transfer
- cmp ebx,4 ; 16-bit channel?
- jb @@WriteDMAC ; No, program DMAC
- shr eax,1 ; Yes, convert address and count
- shr esi,1 ; to 16-bit, 128K/page format
-
-; Set the DMA address word (bits 0-15)
-
-@@WriteDMAC:
- mov dl,[DMAC_addr+ebx]
- out dx,al
- mov al,ah
- out dx,al
-
-; Set DMA transfer count
-
- mov eax,esi
- dec eax ; ESI = # of bytes to transfer - 1
- mov dl,[DMAC_cnt+ebx]
- out dx,al
- mov al,ah
- out dx,al
-
-; Set DMA page byte (bits 16-23)
-
- mov al,cl
- mov dl,[DMAC_page+ebx]
- out dx,al
-
-; Set the DMA channel mode
-
- mov al,bl
- and al,11b
- or al,[BYTE mode] ; EAX = (channel & 3) | mode
- mov dl,[DMAC_mode+ebx]
- out dx,al
-
- pop eax ; SMP safe interrupt state restore!
- test eax,200h
- jz @@1
- sti
-@@1: leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong PMAPI PM_DMACPosition(int channel);
-;----------------------------------------------------------------------------
-; Returns the current position in a dma transfer. Interrupts should be
-; disabled before calling this function.
-;----------------------------------------------------------------------------
-cprocstart PM_DMACPosition
-
- ARG channel:UINT
-
- enter_c
- mov ecx,[channel] ; ECX indexes DMAC register tables
- mov dh,0 ; DH = 0 for DMAC register port access
-
-; Generate IOW to clear FF toggle state
-
- mov al,0
- mov dl,[DMAC_FF+ebx]
- out dx,al
- xor eax,eax
- xor ecx,ecx
-
-; Now read the current position for the channel
-
-@@ReadLoop:
- mov dl,[DMAC_cnt+ebx]
- out dx,al
- in al,dx
- mov cl,al
- in al,dx
- mov ch,al ; ECX := first count read
- in al,dx
- mov ah,al
- in al,dx
- xchg al,ah ; EAX := second count read
- sub ecx,eax
- cmp ecx,40h
- jg @@ReadLoop
- cmp ebx,4 ; 16-bit channel?
- jb @@Exit ; No, we are done
- shl eax,1 ; Yes, adjust to byte address
-
-@@Exit: leave_c
- ret
-
-cprocend
-
-
-cpublic _PM_DMACodeEnd
-
-endif
-
-endcodeseg _dma
-
- END ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/_int64.asm b/board/MAI/bios_emulator/scitech/src/pm/common/_int64.asm
deleted file mode 100644
index fdec1b58d8..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/_int64.asm
+++ /dev/null
@@ -1,309 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Language: NASM or TASM Assembler
-;* Environment: Intel 32 bit Protected Mode.
-;*
-;* Description: Code for 64-bit arhithmetic
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac"
-
-header _int64
-
-begcodeseg _int64 ; Start of code segment
-
-a_low EQU 04h ; Access a_low directly on stack
-a_high EQU 08h ; Access a_high directly on stack
-b_low EQU 0Ch ; Access b_low directly on stack
-shift EQU 0Ch ; Access shift directly on stack
-result_2 EQU 0Ch ; Access result directly on stack
-b_high EQU 10h ; Access b_high directly on stack
-result_3 EQU 10h ; Access result directly on stack
-result_4 EQU 14h ; Access result directly on stack
-
-;----------------------------------------------------------------------------
-; void _PM_add64(u32 a_low,u32 a_high,u32 b_low,u32 b_high,__u64 *result);
-;----------------------------------------------------------------------------
-; Adds two 64-bit numbers.
-;----------------------------------------------------------------------------
-cprocstart _PM_add64
-
- mov eax,[esp+a_low]
- add eax,[esp+b_low]
- mov edx,[esp+a_high]
- adc edx,[esp+b_high]
- mov ecx,[esp+result_4]
- mov [ecx],eax
- mov [ecx+4],edx
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _PM_sub64(u32 a_low,u32 a_high,u32 b_low,u32 b_high,__u64 *result);
-;----------------------------------------------------------------------------
-; Subtracts two 64-bit numbers.
-;----------------------------------------------------------------------------
-cprocstart _PM_sub64
-
- mov eax,[esp+a_low]
- sub eax,[esp+b_low]
- mov edx,[esp+a_high]
- sbb edx,[esp+b_high]
- mov ecx,[esp+result_4]
- mov [ecx],eax
- mov [ecx+4],edx
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _PM_mul64(u32 a_high,u32 a_low,u32 b_high,u32 b_low,__u64 *result);
-;----------------------------------------------------------------------------
-; Multiples two 64-bit numbers.
-;----------------------------------------------------------------------------
-cprocstart _PM_mul64
-
- mov eax,[esp+a_high]
- mov ecx,[esp+b_high]
- or ecx,eax
- mov ecx,[esp+b_low]
- jnz @@FullMultiply
- mov eax,[esp+a_low] ; EDX:EAX = b.low * a.low
- mul ecx
- mov ecx,[esp+result_4]
- mov [ecx],eax
- mov [ecx+4],edx
- ret
-
-@@FullMultiply:
- push ebx
- mul ecx ; EDX:EAX = a.high * b.low
- mov ebx,eax
- mov eax,[esp+a_low+4]
- mul [DWORD esp+b_high+4] ; EDX:EAX = b.high * a.low
- add ebx,eax
- mov eax,[esp+a_low+4]
- mul ecx ; EDX:EAX = a.low * b.low
- add edx,ebx
- pop ebx
- mov ecx,[esp+result_4]
- mov [ecx],eax
- mov [ecx+4],edx
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _PM_div64(u32 a_low,u32 a_high,u32 b_low,u32 b_high,__u64 *result);
-;----------------------------------------------------------------------------
-; Divides two 64-bit numbers.
-;----------------------------------------------------------------------------
-cprocstart _PM_div64
-
- push edi
- push esi
- push ebx
- xor edi,edi
- mov eax,[esp+a_high+0Ch]
- or eax,eax
- jns @@ANotNeg
-
-; Dividend is negative, so negate it and save result for later
-
- inc edi
- mov edx,[esp+a_low+0Ch]
- neg eax
- neg edx
- sbb eax,0
- mov [esp+a_high+0Ch],eax
- mov [esp+a_low+0Ch],edx
-
-@@ANotNeg:
- mov eax,[esp+b_high+0Ch]
- or eax,eax
- jns @@BNotNeg
-
-; Divisor is negative, so negate it and save result for later
-
- inc edi
- mov edx,[esp+b_low+0Ch]
- neg eax
- neg edx
- sbb eax,0
- mov [esp+b_high+0Ch],eax
- mov [esp+b_low+0Ch],edx
-
-@@BNotNeg:
- or eax,eax
- jnz @@BHighNotZero
-
-; b.high is zero, so handle this faster
-
- mov ecx,[esp+b_low+0Ch]
- mov eax,[esp+a_high+0Ch]
- xor edx,edx
- div ecx
- mov ebx,eax
- mov eax,[esp+a_low+0Ch]
- div ecx
- mov edx,ebx
- jmp @@BHighZero
-
-@@BHighNotZero:
- mov ebx,eax
- mov ecx,[esp+b_low+0Ch]
- mov edx,[esp+a_high+0Ch]
- mov eax,[esp+a_low+0Ch]
-
-; Shift values right until b.high becomes zero
-
-@@ShiftLoop:
- shr ebx,1
- rcr ecx,1
- shr edx,1
- rcr eax,1
- or ebx,ebx
- jnz @@ShiftLoop
-
-; Now complete the divide process
-
- div ecx
- mov esi,eax
- mul [DWORD esp+b_high+0Ch]
- mov ecx,eax
- mov eax,[esp+b_low+0Ch]
- mul esi
- add edx,ecx
- jb @@8
- cmp edx,[esp+a_high+0Ch]
- ja @@8
- jb @@9
- cmp eax,[esp+a_low+0Ch]
- jbe @@9
-@@8: dec esi
-@@9: xor edx,edx
- mov eax,esi
-
-@@BHighZero:
- dec edi
- jnz @@Done
-
-; The result needs to be negated as either a or b was negative
-
- neg edx
- neg eax
- sbb edx,0
-
-@@Done: pop ebx
- pop esi
- pop edi
- mov ecx,[esp+result_4]
- mov [ecx],eax
- mov [ecx+4],edx
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; __i64 _PM_shr64(u32 a_low,s32 a_high,s32 shift,__u64 *result);
-;----------------------------------------------------------------------------
-; Shift a 64-bit number right
-;----------------------------------------------------------------------------
-cprocstart _PM_shr64
-
- mov eax,[esp+a_low]
- mov edx,[esp+a_high]
- mov cl,[esp+shift]
- shrd edx,eax,cl
- mov ecx,[esp+result_3]
- mov [ecx],eax
- mov [ecx+4],edx
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; __i64 _PM_sar64(u32 a_low,s32 a_high,s32 shift,__u64 *result);
-;----------------------------------------------------------------------------
-; Shift a 64-bit number right (signed)
-;----------------------------------------------------------------------------
-cprocstart _PM_sar64
-
- mov eax,[esp+a_low]
- mov edx,[esp+a_high]
- mov cl,[esp+shift]
- sar edx,cl
- rcr eax,cl
- mov ecx,[esp+result_3]
- mov [ecx],eax
- mov [ecx+4],edx
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; __i64 _PM_shl64(u32 a_low,s32 a_high,s32 shift,__u64 *result);
-;----------------------------------------------------------------------------
-; Shift a 64-bit number left
-;----------------------------------------------------------------------------
-cprocstart _PM_shl64
-
- mov eax,[esp+a_low]
- mov edx,[esp+a_high]
- mov cl,[esp+shift]
- shld edx,eax,cl
- mov ecx,[esp+result_3]
- mov [ecx],eax
- mov [ecx+4],edx
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; __i64 _PM_neg64(u32 a_low,s32 a_high,__u64 *result);
-;----------------------------------------------------------------------------
-; Shift a 64-bit number left
-;----------------------------------------------------------------------------
-cprocstart _PM_neg64
-
- mov eax,[esp+a_low]
- mov edx,[esp+a_high]
- neg eax
- neg edx
- sbb eax,0
- mov ecx,[esp+result_2]
- mov [ecx],eax
- mov [ecx+4],edx
- ret
-
-cprocend
-
-
-endcodeseg _int64
-
- END
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/_joy.asm b/board/MAI/bios_emulator/scitech/src/pm/common/_joy.asm
deleted file mode 100644
index 0ff1ecf55d..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/_joy.asm
+++ /dev/null
@@ -1,230 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Language: 80386 Assembler
-;* Environment: Intel x86, any OS
-;*
-;* Description: Assembly language support routines for reading analogue
-;* joysticks.
-;*
-;****************************************************************************
-
- ideal
-
-include "scitech.mac" ; Memory model macros
-
-ifdef flatmodel
-
-header _joy ; Set up memory model
-
-begcodeseg _joy ; Start of code segment
-
-;----------------------------------------------------------------------------
-; initTimer
-;----------------------------------------------------------------------------
-; Sets up 8253 timer 2 (PC speaker) to start timing, but not produce output.
-;----------------------------------------------------------------------------
-cprocstatic initTimer
-
-; Start timer 2 counting
-
- in al,61h
- and al,0FDh ; Disable speaker output (just in case)
- or al,1
- out 61h,al
-
-; Set the timer 2 count to 0 again to start the timing interval.
-
- mov al,10110100b ; set up to load initial (timer 2)
- out 43h,al ; timer count
- sub al,al
- out 42h,al ; load count lsb
- out 42h,al ; load count msb
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; readTimer2
-;----------------------------------------------------------------------------
-; Reads the number of ticks from the 8253 timer chip using channel 2 (PC
-; speaker). This is non-destructive and does not screw up other libraries.
-;----------------------------------------------------------------------------
-cprocstatic readTimer
-
- xor al,al ; Latch timer 0 command
- out 43h,al ; Latch timer
- in al,42h ; least significant byte
- mov ah,al
- in al,42h ; most significant byte
- xchg ah,al
- and eax,0FFFFh
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; exitTimer
-;----------------------------------------------------------------------------
-; Stops the 8253 timer 2 (PC speaker) counting
-;----------------------------------------------------------------------------
-cprocstatic exitTimer
-
-; Stop timer 2 from counting
-
- push eax
- in al,61h
- and al,0FEh
- out 61h,al
-
-; Some programs have a problem if we change the control port; better change it
-; to something they expect (mode 3 - square wave generator)...
- mov al,0B6h
- out 43h,al
-
- pop eax
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int _EVT_readJoyAxis(int jmask,int *axis);
-;----------------------------------------------------------------------------
-; Function to poll the joystick to read the current axis positions.
-;----------------------------------------------------------------------------
-cprocstart _EVT_readJoyAxis
-
- ARG jmask:UINT, axis:DPTR
-
- LOCAL firstTick:UINT, lastTick:UINT, totalTicks:UINT = LocalSize
-
- enter_c
-
- mov ebx,[jmask]
- mov edi,[axis]
- mov ecx,(1193180/100)
- and ebx,01111b ; Mask out supported axes
- mov dx,201h ; DX := joystick I/O port
- call initTimer ; Start timer 2 counting
- call readTimer ; Returns counter in EAX
- mov [lastTick],eax
-
-@@WaitStable:
- in al,dx
- and al,bl ; Wait for the axes in question to be
- jz @@Stable ; done reading...
- call readTimer ; Returns counter in EAX
- xchg eax,[lastTick]
- cmp eax,[lastTick]
- jb @@1
- sub eax,[lastTick]
-@@1: add [totalTicks],eax
- cmp [totalTicks],ecx ; Check for timeout
- jae @@Stable
- jmp @@WaitStable
-
-@@Stable:
- mov al,0FFh
- out dx,al ; Start joystick reading
- call initTimer ; Start timer 2 counting
- call readTimer ; Returns counter in EAX
- mov [firstTick],eax ; Store initial count
- mov [lastTick],eax
- mov [DWORD totalTicks],0
- cli
-
-@@PollLoop:
- in al,dx ; Read Joystick port
- not al
- and al,bl ; Mask off channels we don't want to read
- jnz @@AxisFlipped ; See if any of the channels flipped
- call readTimer ; Returns counter in EAX
- xchg eax,[lastTick]
- cmp eax,[lastTick]
- jb @@2
- sub eax,[lastTick]
-@@2: add [totalTicks],eax
- cmp [totalTicks],ecx ; Check for timeout
- jae @@TimedOut
- jmp @@PollLoop
-
-@@AxisFlipped:
- xor esi,esi
- mov ah,1
- test al,ah
- jnz @@StoreCount ; Joystick 1, X axis flipped
- add esi,4
- mov ah,2
- test al,ah
- jnz @@StoreCount ; Joystick 1, Y axis flipped
- add esi,4
- mov ah,4
- test al,ah
- jnz @@StoreCount ; Joystick 2, X axis flipped
- add esi,4 ; Joystick 2, Y axis flipped
- mov ah,8
-
-@@StoreCount:
- or bh,ah ; Indicate this axis is active
- xor bl,ah ; Unmark the channels that just tripped
- call readTimer ; Returns counter in EAX
- xchg eax,[lastTick]
- cmp eax,[lastTick]
- jb @@3
- sub eax,[lastTick]
-@@3: add [totalTicks],eax
- mov eax,[totalTicks]
- mov [edi+esi],eax ; Record the time this channel flipped
- cmp bl,0 ; If there are more channels to read,
- jne @@PollLoop ; keep looping
-
-@@TimedOut:
- sti
- call exitTimer ; Stop timer 2 counting
- movzx eax,bh ; Return the mask of working axes
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int _EVT_readJoyButtons(void);
-;----------------------------------------------------------------------------
-; Function to poll the current joystick buttons
-;----------------------------------------------------------------------------
-cprocstart _EVT_readJoyButtons
-
- mov dx,0201h
- in al,dx
- shr al,4
- not al
- and eax,0Fh
- ret
-
-cprocend
-
-endcodeseg _joy
-
-endif
-
- END ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/_mtrr.asm b/board/MAI/bios_emulator/scitech/src/pm/common/_mtrr.asm
deleted file mode 100644
index 1e0a6966ce..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/_mtrr.asm
+++ /dev/null
@@ -1,272 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Language: 80386 Assembler, TASM 4.0 or NASM
-;* Environment: 16/32 bit Ring 0 device driver
-;*
-;* Description: Assembler support routines for the Memory Type Range Register
-;* (MTRR) module.
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac" ; Memory model macros
-
-header _mtrr ; Set up memory model
-
-begdataseg _mtrr
-
-ifdef DOS4GW
- cextern _PM_haveCauseWay,UINT
-endif
-
-enddataseg _mtrr
-
-begcodeseg _mtrr ; Start of code segment
-
-P586
-
-;----------------------------------------------------------------------------
-; ibool _MTRR_isRing0(void);
-;----------------------------------------------------------------------------
-; Checks to see if we are running at ring 0. This check is only relevant
-; for 32-bit DOS4GW and compatible programs. If we are not running under
-; DOS4GW, then we simply assume we are a ring 0 device driver.
-;----------------------------------------------------------------------------
-cprocnear _MTRR_isRing0
-
-; Are we running under CauseWay?
-
-ifdef DOS4GW
- enter_c
- mov ax,cs
- and eax,3
- xor eax,3
- jnz @@Exit
-
-; CauseWay runs the apps at ring 3, but implements support for specific
-; ring 0 instructions that we need to get stuff done under real DOS.
-
- mov eax,1
- cmp [UINT _PM_haveCauseWay],0
- jnz @@Exit
-@@Fail: xor eax,eax
-@@Exit: leave_c
- ret
-else
-ifdef __SMX32__
- mov eax,1 ; SMX is ring 0!
- ret
-else
-ifdef __VXD__
- mov eax,1 ; VxD is ring 0!
- ret
-else
-ifdef __NT_DRIVER__
- mov eax,1 ; NT/W2K is ring 0!
- ret
-else
-else
- xor eax,eax ; Assume ring 3 for 32-bit DOS
- ret
-endif
-endif
-endif
-endif
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong _MTRR_disableInt(void);
-;----------------------------------------------------------------------------
-; Return processor interrupt status and disable interrupts.
-;----------------------------------------------------------------------------
-cprocstart _MTRR_disableInt
-
- pushfd ; Put flag word on stack
- cli ; Disable interrupts!
- pop eax ; deposit flag word in return register
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _MTRR_restoreInt(ulong ps);
-;----------------------------------------------------------------------------
-; Restore processor interrupt status.
-;----------------------------------------------------------------------------
-cprocstart _MTRR_restoreInt
-
- ARG ps:ULONG
-
- push ebp
- mov ebp,esp ; Set up stack frame
- mov ecx,[ps]
- test ecx,200h ; SMP safe interrupt flag restore!
- jz @@1
- sti
-@@1: pop ebp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong _MTRR_saveCR4(void);
-;----------------------------------------------------------------------------
-; Save the value of CR4 and clear the Page Global Enable (bit 7). We also
-; disable and flush the caches.
-;----------------------------------------------------------------------------
-cprocstart _MTRR_saveCR4
-
- enter_c
-
-; Save value of CR4 and clear Page Global Enable (bit 7)
-
- mov ebx,cr4
- mov eax,ebx
- and al,7Fh
- mov cr4,eax
-
-; Disable and flush caches
-
- mov eax,cr0
- or eax,40000000h
- wbinvd
- mov cr0,eax
- wbinvd
-
-; Return value from CR4
-
- mov eax,ebx
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _MTRR_restoreCR4(ulong cr4Val)
-;----------------------------------------------------------------------------
-; Save the value of CR4 and clear the Page Global Enable (bit 7). We also
-; disable and flush the caches.
-;----------------------------------------------------------------------------
-cprocstart _MTRR_restoreCR4
-
- ARG cr4Val:ULONG
-
- enter_c
-
-; Enable caches
-
- mov eax,cr0
- and eax,0BFFFFFFFh
- mov cr0,eax
- mov eax,[cr4Val]
- mov cr4,eax
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uchar _MTRR_getCx86(uchar reg);
-;----------------------------------------------------------------------------
-; Read a Cyrix CPU indexed register
-;----------------------------------------------------------------------------
-cprocstart _MTRR_getCx86
-
- ARG reg:UCHAR
-
- enter_c
- mov al,[reg]
- out 22h,al
- in al,23h
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uchar _MTRR_setCx86(uchar reg,uchar val);
-;----------------------------------------------------------------------------
-; Write a Cyrix CPU indexed register
-;----------------------------------------------------------------------------
-cprocstart _MTRR_setCx86
-
- ARG reg:UCHAR, val:UCHAR
-
- enter_c
- mov al,[reg]
- out 22h,al
- mov al,[val]
- out 23h,al
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _MTRR_readMSR(uong reg, ulong FAR *eax, ulong FAR *edx);
-;----------------------------------------------------------------------------
-; Writes the specific Machine Status Register used on the newer Intel
-; Pentium Pro and Pentium II motherboards.
-;----------------------------------------------------------------------------
-cprocnear _MTRR_readMSR
-
- ARG reg:ULONG, v_eax:DPTR, v_edx:DPTR
-
- enter_c
- mov ecx,[reg]
- rdmsr
- mov ebx,[v_eax]
- mov [ebx],eax
- mov ebx,[v_edx]
- mov [ebx],edx
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _MTRR_writeMSR(uong reg, ulong eax, ulong edx);
-;----------------------------------------------------------------------------
-; Writes the specific Machine Status Register used on the newer Intel
-; Pentium Pro and Pentium II motherboards.
-;----------------------------------------------------------------------------
-cprocnear _MTRR_writeMSR
-
- ARG reg:ULONG, v_eax:ULONG, v_edx:ULONG
-
- enter_c
- mov ecx,[reg]
- mov eax,[v_eax]
- mov edx,[v_edx]
- wrmsr
- leave_c
- ret
-
-cprocend
-
-endcodeseg _mtrr
-
- END ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/_pcihelp.asm b/board/MAI/bios_emulator/scitech/src/pm/common/_pcihelp.asm
deleted file mode 100644
index 5b8dbcc73a..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/_pcihelp.asm
+++ /dev/null
@@ -1,358 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Language: 80386 Assembler, TASM 4.0 or NASM
-;* Environment: Any
-;*
-;* Description: Helper assembler functions for PCI access module.
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac" ; Memory model macros
-
-header _pcilib
-
-begcodeseg _pcilib
-
-ifdef flatmodel
-
-;----------------------------------------------------------------------------
-; uchar _ASMAPI _BIOS32_service(
-; ulong service,
-; ulong func,
-; ulong *physBase,
-; ulong *length,
-; ulong *serviceOffset,
-; PCIBIOS_entry entry);
-;----------------------------------------------------------------------------
-; Call the BIOS32 services directory
-;----------------------------------------------------------------------------
-cprocstart _BIOS32_service
-
- ARG service:ULONG, func:ULONG, physBase:DPTR, len:DPTR, off:DPTR, entry:QWORD
-
- enter_c
- mov eax,[service]
- mov ebx,[func]
-ifdef USE_NASM
- call far dword [entry]
-else
- call [FWORD entry]
-endif
- mov esi,[physBase]
- mov [esi],ebx
- mov esi,[len]
- mov [esi],ecx
- mov esi,[off]
- mov [esi],edx
- leave_c
- ret
-
-cprocend
-
-endif
-
-;----------------------------------------------------------------------------
-; ushort _ASMAPI _PCIBIOS_isPresent(ulong i_eax,ulong *o_edx,ushort *oeax,
-; uchar *o_cl,PCIBIOS_entry entry)
-;----------------------------------------------------------------------------
-; Call the PCI BIOS to determine if it is present.
-;----------------------------------------------------------------------------
-cprocstart _PCIBIOS_isPresent
-
- ARG i_eax:ULONG, o_edx:DPTR, oeax:DPTR, o_cl:DPTR, entry:QWORD
-
- enter_c
- mov eax,[i_eax]
-ifdef flatmodel
-ifdef USE_NASM
- call far dword [entry]
-else
- call [FWORD entry]
-endif
-else
- int 1Ah
-endif
- _les _si,[o_edx]
- mov [_ES _si],edx
- _les _si,[oeax]
- mov [_ES _si],ax
- _les _si,[o_cl]
- mov [_ES _si],cl
- mov ax,bx
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong _PCIBIOS_service(ulong r_eax,ulong r_ebx,ulong r_edi,ulong r_ecx,
-; PCIBIOS_entry entry)
-;----------------------------------------------------------------------------
-; Call the PCI BIOS services, either via the 32-bit protected mode entry
-; point or via the Int 1Ah 16-bit interrupt.
-;----------------------------------------------------------------------------
-cprocstart _PCIBIOS_service
-
- ARG r_eax:ULONG, r_ebx:ULONG, r_edi:ULONG, r_ecx:ULONG, entry:QWORD
-
- enter_c
- mov eax,[r_eax]
- mov ebx,[r_ebx]
- mov edi,[r_edi]
- mov ecx,[r_ecx]
-ifdef flatmodel
-ifdef USE_NASM
- call far dword [entry]
-else
- call [FWORD entry]
-endif
-else
- int 1Ah
-endif
- mov eax,ecx
-ifndef flatmodel
- shld edx,eax,16 ; Return result in DX:AX
-endif
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int _PCIBIOS_getRouting(PCIRoutingOptionsBuffer *buf,PCIBIOS_entry entry);
-;----------------------------------------------------------------------------
-; Get the routing options for PCI devices
-;----------------------------------------------------------------------------
-cprocstart _PCIBIOS_getRouting
-
- ARG buf:DPTR, entry:QWORD
-
- enter_c
- mov eax,0B10Eh
- mov bx,0
- _les _di,[buf]
-ifdef flatmodel
-ifdef USE_NASM
- call far dword [entry]
-else
- call [FWORD entry]
-endif
-else
- int 1Ah
-endif
- movzx eax,ah
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ibool _PCIBIOS_setIRQ(int busDev,int intPin,int IRQ,PCIBIOS_entry entry);
-;----------------------------------------------------------------------------
-; Change the IRQ routing for the PCI device
-;----------------------------------------------------------------------------
-cprocstart _PCIBIOS_setIRQ
-
- ARG busDev:UINT, intPin:UINT, IRQ:UINT, entry:QWORD
-
- enter_c
- mov eax,0B10Fh
- mov bx,[USHORT busDev]
- mov cl,[BYTE intPin]
- mov ch,[BYTE IRQ]
-ifdef flatmodel
-ifdef USE_NASM
- call far dword [entry]
-else
- call [FWORD entry]
-endif
-else
- int 1Ah
-endif
- mov eax,1
- jnc @@1
- xor eax,eax ; Function failed!
-@@1: leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong _PCIBIOS_specialCycle(int bus,ulong data,PCIBIOS_entry entry);
-;----------------------------------------------------------------------------
-; Generate a special cycle via the PCI BIOS.
-;----------------------------------------------------------------------------
-cprocstart _PCIBIOS_specialCycle
-
- ARG bus:UINT, data:ULONG, entry:QWORD
-
- enter_c
- mov eax,0B106h
- mov bh,[BYTE bus]
- mov ecx,[data]
-ifdef flatmodel
-ifdef USE_NASM
- call far dword [entry]
-else
- call [FWORD entry]
-endif
-else
- int 1Ah
-endif
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ushort _PCI_getCS(void)
-;----------------------------------------------------------------------------
-cprocstart _PCI_getCS
-
- mov ax,cs
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_inpb(int port)
-;----------------------------------------------------------------------------
-; Reads a byte from the specified port
-;----------------------------------------------------------------------------
-cprocstart PM_inpb
-
- ARG port:UINT
-
- push _bp
- mov _bp,_sp
- xor _ax,_ax
- mov _dx,[port]
- in al,dx
- pop _bp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_inpw(int port)
-;----------------------------------------------------------------------------
-; Reads a word from the specified port
-;----------------------------------------------------------------------------
-cprocstart PM_inpw
-
- ARG port:UINT
-
- push _bp
- mov _bp,_sp
- xor _ax,_ax
- mov _dx,[port]
- in ax,dx
- pop _bp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong PM_inpd(int port)
-;----------------------------------------------------------------------------
-; Reads a word from the specified port
-;----------------------------------------------------------------------------
-cprocstart PM_inpd
-
- ARG port:UINT
-
- push _bp
- mov _bp,_sp
- mov _dx,[port]
- in eax,dx
-ifndef flatmodel
- shld edx,eax,16 ; DX:AX = result
-endif
- pop _bp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_outpb(int port,int value)
-;----------------------------------------------------------------------------
-; Write a byte to the specified port.
-;----------------------------------------------------------------------------
-cprocstart PM_outpb
-
- ARG port:UINT, value:UINT
-
- push _bp
- mov _bp,_sp
- mov _dx,[port]
- mov _ax,[value]
- out dx,al
- pop _bp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_outpw(int port,int value)
-;----------------------------------------------------------------------------
-; Write a word to the specified port.
-;----------------------------------------------------------------------------
-cprocstart PM_outpw
-
- ARG port:UINT, value:UINT
-
- push _bp
- mov _bp,_sp
- mov _dx,[port]
- mov _ax,[value]
- out dx,ax
- pop _bp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_outpd(int port,ulong value)
-;----------------------------------------------------------------------------
-; Write a word to the specified port.
-;----------------------------------------------------------------------------
-cprocstart PM_outpd
-
- ARG port:UINT, value:ULONG
-
- push _bp
- mov _bp,_sp
- mov _dx,[port]
- mov eax,[value]
- out dx,eax
- pop _bp
- ret
-
-cprocend
-
-endcodeseg _pcilib
-
- END
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/agp.c b/board/MAI/bios_emulator/scitech/src/pm/common/agp.c
deleted file mode 100644
index d53bc88e14..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/agp.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit Ring 0 device driver
-*
-* Description: Generic module to implement AGP support functions using the
-* SciTech Nucleus AGP support drivers. If the OS provides
-* native AGP support, this module should *NOT* be used. Instead
-* wrappers should be placed around the OS support functions
-* to implement this functionality.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#ifndef REALMODE
-#include "nucleus/agp.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-static AGP_devCtx *agp;
-static AGP_driverFuncs driver;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-RETURNS:
-Size of AGP aperture in MB on success, 0 on failure.
-
-REMARKS:
-This function initialises the AGP driver in the system and returns the
-size of the available AGP aperture in megabytes.
-****************************************************************************/
-ulong PMAPI PM_agpInit(void)
-{
- if ((agp = AGP_loadDriver(0)) == NULL)
- return 0;
- driver.dwSize = sizeof(driver);
- if (!agp->QueryFunctions(AGP_GET_DRIVERFUNCS,&driver))
- return 0;
- switch (driver.GetApertureSize()) {
- case agpSize4MB: return 4;
- case agpSize8MB: return 8;
- case agpSize16MB: return 16;
- case agpSize32MB: return 32;
- case agpSize64MB: return 64;
- case agpSize128MB: return 128;
- case agpSize256MB: return 256;
- case agpSize512MB: return 512;
- case agpSize1GB: return 1024;
- case agpSize2GB: return 2048;
- }
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-This function closes down the loaded AGP driver.
-****************************************************************************/
-void PMAPI PM_agpExit(void)
-{
- AGP_unloadDriver(agp);
-}
-
-/****************************************************************************
-PARAMETERS:
-numPages - Number of memory pages that should be reserved
-type - Type of memory to allocate
-physContext - Returns the physical context handle for the mapping
-physAddr - Returns the physical address for the mapping
-
-RETURNS:
-True on success, false on failure.
-
-REMARKS:
-This function reserves a range of physical memory addresses on the system
-bus which the AGP controller will respond to. If this function succeeds,
-the AGP controller can respond to the reserved physical address range on
-the bus. However you must first call AGP_commitPhysical to cause this memory
-to actually be committed for use before it can be accessed.
-****************************************************************************/
-ibool PMAPI PM_agpReservePhysical(
- ulong numPages,
- int type,
- void **physContext,
- PM_physAddr *physAddr)
-{
- switch (type) {
- case PM_agpUncached:
- type = agpUncached;
- break;
- case PM_agpWriteCombine:
- type = agpWriteCombine;
- break;
- case PM_agpIntelDCACHE:
- type = agpIntelDCACHE;
- break;
- default:
- return false;
- }
- return driver.ReservePhysical(numPages,type,physContext,physAddr) == nOK;
-}
-
-/****************************************************************************
-PARAMETERS:
-physContext - Physical AGP context to release
-
-RETURNS:
-True on success, false on failure.
-
-REMARKS:
-This function releases a range of physical memory addresses on the system
-bus which the AGP controller will respond to. All committed memory for
-the physical address range covered by the context will be released.
-****************************************************************************/
-ibool PMAPI PM_agpReleasePhysical(
- void *physContext)
-{
- return driver.ReleasePhysical(physContext) == nOK;
-}
-
-/****************************************************************************
-PARAMETERS:
-physContext - Physical AGP context to commit memory for
-numPages - Number of pages to be committed
-startOffset - Offset in pages into the reserved physical context
-physAddr - Returns the physical address of the committed memory
-
-RETURNS:
-True on success, false on failure.
-
-REMARKS:
-This function commits into the specified physical context that was previously
-reserved by a call to ReservePhysical. You can use the startOffset and
-numPages parameters to only commit portions of the reserved memory range at
-a time.
-****************************************************************************/
-ibool PMAPI PM_agpCommitPhysical(
- void *physContext,
- ulong numPages,
- ulong startOffset,
- PM_physAddr *physAddr)
-{
- return driver.CommitPhysical(physContext,numPages,startOffset,physAddr) == nOK;
-}
-
-/****************************************************************************
-PARAMETERS:
-physContext - Physical AGP context to free memory for
-numPages - Number of pages to be freed
-startOffset - Offset in pages into the reserved physical context
-
-RETURNS:
-True on success, false on failure.
-
-REMARKS:
-This function frees memory previously committed by the CommitPhysical
-function. Note that you can free a portion of a memory range that was
-previously committed if you wish.
-****************************************************************************/
-ibool PMAPI PM_agpFreePhysical(
- void *physContext,
- ulong numPages,
- ulong startOffset)
-{
- return driver.FreePhysical(physContext,numPages,startOffset) == nOK;
-}
-
-#endif /* !REALMODE */
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/keyboard.c b/board/MAI/bios_emulator/scitech/src/pm/common/keyboard.c
deleted file mode 100644
index 36867bdba7..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/keyboard.c
+++ /dev/null
@@ -1,449 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Direct keyboard event handling module. This module contains
-* code to process raw scan code information, convert it to
-* virtual scan codes and do code page translation to ASCII
-* for different international keyboard layouts.
-*
-****************************************************************************/
-
-/*---------------------------- Implementation -----------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-scanCode - Keyboard scan code to translate
-table - Code page table to search
-count - Number of entries in the code page table
-
-REMARKS:
-This function translates the scan codes from keyboard scan codes to ASCII
-codes using a binary search on the code page table.
-****************************************************************************/
-static uchar translateScan(
- uchar scanCode,
- codepage_entry_t *table,
- int count)
-{
- codepage_entry_t *test;
- int n,pivot,val;
-
- for (n = count; n > 0; ) {
- pivot = n >> 1;
- test = table + pivot;
- val = scanCode - test->scanCode;
- if (val < 0)
- n = pivot;
- else if (val == 0)
- return test->asciiCode;
- else {
- table = test + 1;
- n -= pivot + 1;
- }
- }
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-{secret}
-****************************************************************************/
-void _EVT_maskKeyCode(
- event_t *evt)
-{
- int ascii,scan = EVT_scanCode(evt->message);
-
- evt->message &= ~0xFF;
- if (evt->modifiers & EVT_NUMLOCK) {
- if ((ascii = translateScan(scan,EVT.codePage->numPad,EVT.codePage->numPadLen)) != 0) {
- evt->message |= ascii;
- return;
- }
- }
- if (evt->modifiers & EVT_CTRLSTATE) {
- evt->message |= translateScan(scan,EVT.codePage->ctrl,EVT.codePage->ctrlLen);
- return;
- }
- if (evt->modifiers & EVT_CAPSLOCK) {
- if (evt->modifiers & EVT_SHIFTKEY) {
- if ((ascii = translateScan(scan,EVT.codePage->shiftCaps,EVT.codePage->shiftCapsLen)) != 0) {
- evt->message |= ascii;
- return;
- }
- }
- else {
- if ((ascii = translateScan(scan,EVT.codePage->caps,EVT.codePage->capsLen)) != 0) {
- evt->message |= ascii;
- return;
- }
- }
- }
- if (evt->modifiers & EVT_SHIFTKEY) {
- if ((ascii = translateScan(scan,EVT.codePage->shift,EVT.codePage->shiftLen)) != 0) {
- evt->message |= ascii;
- return;
- }
- }
- evt->message |= translateScan(scan,EVT.codePage->normal,EVT.codePage->normalLen);
-}
-
-/****************************************************************************
-REMARKS:
-Returns true if the key with the specified scan code is being held down.
-****************************************************************************/
-static ibool _EVT_isKeyDown(
- uchar scanCode)
-{
- if (scanCode > 0x7F)
- return false;
- else
- return EVT.keyTable[scanCode] != 0;
-}
-
-/****************************************************************************
-PARAMETERS:
-what - Event code
-message - Event message (ASCII code and scan code)
-
-REMARKS:
-Adds a new keyboard event to the event queue. This routine is called from
-within the keyboard interrupt subroutine!
-
-NOTE: Interrupts are OFF when this routine is called by the keyboard ISR,
- and we leave them OFF the entire time.
-****************************************************************************/
-static void addKeyEvent(
- uint what,
- uint message)
-{
- event_t evt;
-
- if (EVT.count < EVENTQSIZE) {
- /* Save information in event record */
- evt.when = _EVT_getTicks();
- evt.what = what;
- evt.message = message | 0x10000UL;
- evt.where_x = 0;
- evt.where_y = 0;
- evt.relative_x = 0;
- evt.relative_y = 0;
- evt.modifiers = EVT.keyModifiers;
- if (evt.what == EVT_KEYREPEAT) {
- if (EVT.oldKey != -1)
- EVT.evtq[EVT.oldKey].message += 0x10000UL;
- else {
- EVT.oldKey = EVT.freeHead;
- addEvent(&evt); /* Add to tail of event queue */
- }
- }
- else {
-#ifdef __QNX__
- _EVT_maskKeyCode(&evt);
-#endif
- addEvent(&evt); /* Add to tail of event queue */
- }
- EVT.oldMove = -1;
- }
-}
-
-/****************************************************************************
-REMARKS:
-This function waits for the keyboard controller to set the ready-for-write
-bit.
-****************************************************************************/
-static int kbWaitForWriteReady(void)
-{
- int timeout = 8192;
- while ((timeout > 0) && (PM_inpb(0x64) & 0x02))
- timeout--;
- return (timeout > 0);
-}
-
-/****************************************************************************
-REMARKS:
-This function waits for the keyboard controller to set the ready-for-read
-bit.
-****************************************************************************/
-static int kbWaitForReadReady(void)
-{
- int timeout = 8192;
- while ((timeout > 0) && (!(PM_inpb(0x64) & 0x01)))
- timeout--;
- return (timeout > 0);
-}
-
-/****************************************************************************
-PARAMETERS:
-data - Data to send to the keyboard
-
-REMARKS:
-This function sends a data byte to the keyboard controller.
-****************************************************************************/
-static int kbSendData(
- uchar data)
-{
- int resends = 4;
- int timeout, temp;
-
- do {
- if (!kbWaitForWriteReady())
- return 0;
- PM_outpb(0x60,data);
- timeout = 8192;
- while (--timeout > 0) {
- if (!kbWaitForReadReady())
- return 0;
- temp = PM_inpb(0x60);
- if (temp == 0xFA)
- return 1;
- if (temp == 0xFE)
- break;
- }
- } while ((resends-- > 0) && (timeout > 0));
- return 0;
-}
-
-/****************************************************************************
-PARAMETERS:
-modifiers - Keyboard modifier flags
-
-REMARKS:
-This function re-programs the LED's on the keyboard to the values stored
-in the passed in modifier flags. If the 'allowLEDS' flag is false, this
-function does nothing.
-****************************************************************************/
-static void setLEDS(
- uint modifiers)
-{
- if (EVT.allowLEDS) {
- if (!kbSendData(0xED) || !kbSendData((modifiers>>9) & 7)) {
- kbSendData(0xF4);
- }
- }
-}
-
-/****************************************************************************
-REMARKS:
-Function to process raw scan codes read from the keyboard controller.
-
-NOTE: Interrupts are OFF when this routine is called by the keyboard ISR,
- and we leave them OFF the entire time.
-{secret}
-****************************************************************************/
-void processRawScanCode(
- int scan)
-{
- static int pauseLoop = 0;
- static int extended = 0;
- int what;
-
- if (pauseLoop) {
- /* Skip scan codes until the pause key sequence has been read */
- pauseLoop--;
- }
- else if (scan == 0xE0) {
- /* This signals the start of an extended scan code sequence */
- extended = 1;
- }
- else if (scan == 0xE1) {
- /* The Pause key sends a strange scan code sequence, which is:
- *
- * E1 1D 52 E1 9D D2
- *
- * However there is never any release code nor any auto-repeat for
- * this key. For this reason we simply ignore the key and skip the
- * next 5 scan codes read from the keyboard.
- */
- pauseLoop = 5;
- }
- else {
- /* Process the scan code normally (it may be an extended code
- * however!). Bit 7 means key was released, and bits 0-6 are the
- * scan code.
- */
- what = (scan & 0x80) ? EVT_KEYUP : EVT_KEYDOWN;
- scan &= 0x7F;
- if (extended) {
- extended = 0;
- if (scan == 0x2A || scan == 0x36) {
- /* Ignore these extended scan code sequences. These are
- * used by the keyboard controller to wrap around certain
- * key sequences for the keypad (and when NUMLOCK is down
- * internally).
- */
- return;
- }
-
- /* Convert extended codes for key sequences that we map to
- * virtual scan codes so the user can detect them in their
- * code.
- */
- switch (scan) {
- case KB_leftCtrl: scan = KB_rightCtrl; break;
- case KB_leftAlt: scan = KB_rightAlt; break;
- case KB_divide: scan = KB_padDivide; break;
- case KB_enter: scan = KB_padEnter; break;
- case KB_padTimes: scan = KB_sysReq; break;
- }
- }
- else {
- /* Convert regular scan codes for key sequences that we map to
- * virtual scan codes so the user can detect them in their
- * code.
- */
- switch (scan) {
- case KB_left: scan = KB_padLeft; break;
- case KB_right: scan = KB_padRight; break;
- case KB_up: scan = KB_padUp; break;
- case KB_down: scan = KB_padDown; break;
- case KB_insert: scan = KB_padInsert; break;
- case KB_delete: scan = KB_padDelete; break;
- case KB_home: scan = KB_padHome; break;
- case KB_end: scan = KB_padEnd; break;
- case KB_pageUp: scan = KB_padPageUp; break;
- case KB_pageDown: scan = KB_padPageDown; break;
- }
- }
-
- /* Determine if the key is an UP, DOWN or REPEAT and maintain the
- * up/down status of all keys in our global key array.
- */
- if (what == EVT_KEYDOWN) {
- if (EVT.keyTable[scan])
- what = EVT_KEYREPEAT;
- else
- EVT.keyTable[scan] = scan;
- }
- else {
- EVT.keyTable[scan] = 0;
- }
-
- /* Handle shift key modifiers */
- if (what != EVT_KEYREPEAT) {
- switch (scan) {
- case KB_capsLock:
- if (what == EVT_KEYDOWN)
- EVT.keyModifiers ^= EVT_CAPSLOCK;
- setLEDS(EVT.keyModifiers);
- break;
- case KB_numLock:
- if (what == EVT_KEYDOWN)
- EVT.keyModifiers ^= EVT_NUMLOCK;
- setLEDS(EVT.keyModifiers);
- break;
- case KB_scrollLock:
- if (what == EVT_KEYDOWN)
- EVT.keyModifiers ^= EVT_SCROLLLOCK;
- setLEDS(EVT.keyModifiers);
- break;
- case KB_leftShift:
- if (what == EVT_KEYUP)
- EVT.keyModifiers &= ~EVT_LEFTSHIFT;
- else
- EVT.keyModifiers |= EVT_LEFTSHIFT;
- break;
- case KB_rightShift:
- if (what == EVT_KEYUP)
- EVT.keyModifiers &= ~EVT_RIGHTSHIFT;
- else
- EVT.keyModifiers |= EVT_RIGHTSHIFT;
- break;
- case KB_leftCtrl:
- if (what == EVT_KEYUP)
- EVT.keyModifiers &= ~EVT_LEFTCTRL;
- else
- EVT.keyModifiers |= EVT_LEFTCTRL;
- break;
- case KB_rightCtrl:
- if (what == EVT_KEYUP)
- EVT.keyModifiers &= ~EVT_RIGHTCTRL;
- else
- EVT.keyModifiers |= EVT_RIGHTCTRL;
- break;
- case KB_leftAlt:
- if (what == EVT_KEYUP)
- EVT.keyModifiers &= ~EVT_LEFTALT;
- else
- EVT.keyModifiers |= EVT_LEFTALT;
- break;
- case KB_rightAlt:
- if (what == EVT_KEYUP)
- EVT.keyModifiers &= ~EVT_RIGHTALT;
- else
- EVT.keyModifiers |= EVT_RIGHTALT;
- break;
-#ifdef SUPPORT_CTRL_ALT_DEL
- case KB_delete:
- if ((EVT.keyModifiers & EVT_CTRLSTATE) && (EVT.keyModifiers & EVT_ALTSTATE))
- Reboot();
- break;
-#endif
- }
- }
-
- /* Add the untranslated key code to the event queue. All
- * translation to ASCII from the key codes occurs when the key
- * is extracted from the queue, saving time in the low level
- * interrupt handler.
- */
- addKeyEvent(what,scan << 8);
- }
-}
-
-/****************************************************************************
-DESCRIPTION:
-Enables/disables the update of the keyboard LED status indicators.
-
-HEADER:
-event.h
-
-PARAMETERS:
-enable - True to enable, false to disable
-
-REMARKS:
-Enables the update of the keyboard LED status indicators. Sometimes it may
-be convenient in the application to turn off the updating of the LED
-status indicators (such as if a game is using the CAPSLOCK key for some
-function). Passing in a value of FALSE to this function will turn off all
-the LEDS, and stop updating them when the internal status changes (note
-however that internally we still keep track of the toggle key status!).
-****************************************************************************/
-void EVTAPI EVT_allowLEDS(
- ibool enable)
-{
- EVT.allowLEDS = true;
- if (enable)
- setLEDS(EVT.keyModifiers);
- else
- setLEDS(0);
- EVT.allowLEDS = enable;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/malloc.c b/board/MAI/bios_emulator/scitech/src/pm/common/malloc.c
deleted file mode 100644
index 83ef22113c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/malloc.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Module for implementing the PM library overrideable memory
-* allocator functions.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-void * (*__PM_malloc)(size_t size) = malloc;
-void * (*__PM_calloc)(size_t nelem,size_t size) = calloc;
-void * (*__PM_realloc)(void *ptr,size_t size) = realloc;
-void (*__PM_free)(void *p) = free;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-DESCRIPTION:
-Use local memory allocation routines.
-
-HEADER:
-pmapi.h
-
-PARAMETERS:
-malloc - Pointer to new malloc routine to use
-calloc - Pointer to new caalloc routine to use
-realloc - Pointer to new realloc routine to use
-free - Pointer to new free routine to use
-
-REMARKS:
-Tells the PM library to use a set of user specified memory allocation
-routines instead of using the normal malloc/calloc/realloc/free standard
-C library functions. This is useful if you wish to use a third party
-debugging malloc library or perhaps a set of faster memory allocation
-functions with the PM library, or any apps that use the PM library (such as
-the MGL). Once you have registered your memory allocation routines, all
-calls to PM_malloc, PM_calloc, PM_realloc and PM_free will be revectored to
-your local memory allocation routines.
-
-This is also useful if you need to keep track of just how much physical
-memory your program has been using. You can use the PM_availableMemory
-function to find out how much physical memory is available when the program
-starts, and then you can use your own local memory allocation routines to
-keep track of how much memory has been used and freed.
-
-NOTE: This function should be called right at the start of your application,
- before you initialise any other components or libraries.
-
-NOTE: Code compiled into Binary Portable DLL's and Drivers automatically
- end up calling these functions via the BPD C runtime library.
-
-SEE ALSO:
-PM_malloc, PM_calloc, PM_realloc, PM_free, PM_availableMemory
-****************************************************************************/
-void PMAPI PM_useLocalMalloc(
- void * (*malloc)(size_t size),
- void * (*calloc)(size_t nelem,size_t size),
- void * (*realloc)(void *ptr,size_t size),
- void (*free)(void *p))
-{
- __PM_malloc = malloc;
- __PM_calloc = calloc;
- __PM_realloc = realloc;
- __PM_free = free;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Allocate a block of memory.
-
-HEADER:
-pmapi.h
-
-PARAMETERS:
-size - Size of block to allocate in bytes
-
-RETURNS:
-Pointer to allocated block, or NULL if out of memory.
-
-REMARKS:
-Allocates a block of memory of length size. If you have changed the memory
-allocation routines with the PM_useLocalMalloc function, then calls to this
-function will actually make calls to the local memory allocation routines
-that you have registered.
-
-SEE ALSO:
-PM_calloc, PM_realloc, PM_free, PM_useLocalMalloc
-****************************************************************************/
-void * PMAPI PM_malloc(
- size_t size)
-{
- return __PM_malloc(size);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Allocate and clear a large memory block.
-
-HEADER:
-pmapi.h
-
-PARAMETERS:
-nelem - number of contiguous size-byte units to allocate
-size - size of unit in bytes
-
-RETURNS:
-Pointer to allocated memory if successful, NULL if out of memory.
-
-REMARKS:
-Allocates a block of memory of length (size * nelem), and clears the
-allocated area with zeros (0). If you have changed the memory allocation
-routines with the PM_useLocalMalloc function, then calls to this function
-will actually make calls to the local memory allocation routines that you
-have registered.
-
-SEE ALSO:
-PM_malloc, PM_realloc, PM_free, PM_useLocalMalloc
-****************************************************************************/
-void * PMAPI PM_calloc(
- size_t nelem,
- size_t size)
-{
- return __PM_calloc(nelem,size);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Re-allocate a block of memory
-
-HEADER:
-pmapi.h
-
-PARAMETERS:
-ptr - Pointer to block to resize
-size - size of unit in bytes
-
-RETURNS:
-Pointer to allocated memory if successful, NULL if out of memory.
-
-REMARKS:
-This function reallocates a block of memory that has been previously been
-allocated to the new of size. The new size may be smaller or larger than
-the original block of memory. If you have changed the memory allocation
-routines with the PM_useLocalMalloc function, then calls to this function
-will actually make calls to the local memory allocation routines that you
-have registered.
-
-SEE ALSO:
-PM_malloc, PM_calloc, PM_free, PM_useLocalMalloc
-****************************************************************************/
-void * PMAPI PM_realloc(
- void *ptr,
- size_t size)
-{
- return __PM_realloc(ptr,size);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Frees a block of memory.
-
-HEADER:
-pmapi.h
-
-PARAMETERS:
-p - Pointer to memory block to free
-
-REMARKS:
-Frees a block of memory previously allocated with either PM_malloc,
-PM_calloc or PM_realloc.
-
-SEE ALSO:
-PM_malloc, PM_calloc, PM_realloc, PM_useLocalMalloc
-****************************************************************************/
-void PMAPI PM_free(
- void *p)
-{
- __PM_free(p);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/mtrr.c b/board/MAI/bios_emulator/scitech/src/pm/common/mtrr.c
deleted file mode 100644
index eed5f45c9e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/mtrr.c
+++ /dev/null
@@ -1,867 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Heavily based on code copyright (C) Richard Gooch
-*
-* Language: ANSI C
-* Environment: 32-bit Ring 0 device driver
-*
-* Description: Generic Memory Type Range Register (MTRR) functions to
-* manipulate the MTRR registers on supported CPU's. This code
-* *must* run at ring 0, so you can't normally include this
-* code directly in normal applications (the except is DOS4GW
-* apps which run at ring 0 under real DOS). Thus this code
-* will normally be compiled into a ring 0 device driver for
-* the target operating system.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "ztimerc.h"
-#include "mtrr.h"
-
-#ifndef REALMODE
-
-/*--------------------------- Global variables ----------------------------*/
-
-/* Intel pre-defined MTRR registers */
-
-#define NUM_FIXED_RANGES 88
-#define INTEL_cap_MSR 0x0FE
-#define INTEL_defType_MSR 0x2FF
-#define INTEL_fix64K_00000_MSR 0x250
-#define INTEL_fix16K_80000_MSR 0x258
-#define INTEL_fix16K_A0000_MSR 0x259
-#define INTEL_fix4K_C0000_MSR 0x268
-#define INTEL_fix4K_C8000_MSR 0x269
-#define INTEL_fix4K_D0000_MSR 0x26A
-#define INTEL_fix4K_D8000_MSR 0x26B
-#define INTEL_fix4K_E0000_MSR 0x26C
-#define INTEL_fix4K_E8000_MSR 0x26D
-#define INTEL_fix4K_F0000_MSR 0x26E
-#define INTEL_fix4K_F8000_MSR 0x26F
-
-/* Macros to find the address of a paricular MSR register */
-
-#define INTEL_physBase_MSR(reg) (0x200 + 2 * (reg))
-#define INTEL_physMask_MSR(reg) (0x200 + 2 * (reg) + 1)
-
-/* Cyrix CPU configuration register indexes */
-#define CX86_CCR0 0xC0
-#define CX86_CCR1 0xC1
-#define CX86_CCR2 0xC2
-#define CX86_CCR3 0xC3
-#define CX86_CCR4 0xE8
-#define CX86_CCR5 0xE9
-#define CX86_CCR6 0xEA
-#define CX86_DIR0 0xFE
-#define CX86_DIR1 0xFF
-#define CX86_ARR_BASE 0xC4
-#define CX86_RCR_BASE 0xDC
-
-/* Structure to maintain machine state while updating MTRR registers */
-
-typedef struct {
- ulong flags;
- ulong defTypeLo;
- ulong defTypeHi;
- ulong cr4Val;
- ulong ccr3;
- } MTRRContext;
-
-static int numMTRR = -1;
-static int cpuFamily,cpuType,cpuStepping;
-static void (*getMTRR)(uint reg,ulong *base,ulong *size,int *type) = NULL;
-static void (*setMTRR)(uint reg,ulong base,ulong size,int type) = NULL;
-static int (*getFreeRegion)(ulong base,ulong size) = NULL;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-RETURNS:
-Returns non-zero if we have the write-combining memory type
-****************************************************************************/
-static int MTRR_haveWriteCombine(void)
-{
- ulong config,dummy;
-
- switch (cpuFamily) {
- case CPU_AMD:
- if (cpuType < CPU_AMDAthlon) {
- /* AMD K6-2 stepping 8 and later support the MTRR registers.
- * The earlier K6-2 steppings (300Mhz models) do not
- * support MTRR's.
- */
- if ((cpuType < CPU_AMDK6_2) || (cpuType == CPU_AMDK6_2 && cpuStepping < 8))
- return 0;
- return 1;
- }
- /* Fall through for AMD Athlon which uses P6 style MTRR's */
- case CPU_Intel:
- _MTRR_readMSR(INTEL_cap_MSR,&config,&dummy);
- return (config & (1 << 10));
- case CPU_Cyrix:
- /* Cyrix 6x86 and later support the MTRR registers */
- if (cpuType < CPU_Cyrix6x86)
- return 0;
- return 1;
- }
- return 0;
-}
-
-/****************************************************************************
-PARAMETERS:
-base - The starting physical base address of the region
-size - The size in bytes of the region
-
-RETURNS:
-The index of the region on success, else -1 on error.
-
-REMARKS:
-Generic function to find the location of a free MTRR register to be used
-for creating a new mapping.
-****************************************************************************/
-static int GENERIC_getFreeRegion(
- ulong base,
- ulong size)
-{
- int i,ltype;
- ulong lbase,lsize;
-
- for (i = 0; i < numMTRR; i++) {
- getMTRR(i,&lbase,&lsize,&ltype);
- if (lsize < 1)
- return i;
- }
- (void)base;
- (void)size;
- return -1;
-}
-
-/****************************************************************************
-PARAMETERS:
-base - The starting physical base address of the region
-size - The size in bytes of the region
-
-RETURNS:
-The index of the region on success, else -1 on error.
-
-REMARKS:
-Generic function to find the location of a free MTRR register to be used
-for creating a new mapping.
-****************************************************************************/
-static int AMDK6_getFreeRegion(
- ulong base,
- ulong size)
-{
- int i,ltype;
- ulong lbase,lsize;
-
- for (i = 0; i < numMTRR; i++) {
- getMTRR(i,&lbase,&lsize,&ltype);
- if (lsize < 1)
- return i;
- }
- (void)base;
- (void)size;
- return -1;
-}
-
-/****************************************************************************
-PARAMETERS:
-base - The starting physical base address of the region
-size - The size in bytes of the region
-
-RETURNS:
-The index of the region on success, else -1 on error.
-
-REMARKS:
-Cyrix specific function to find the location of a free MTRR register to be
-used for creating a new mapping.
-****************************************************************************/
-static int CYRIX_getFreeRegion(
- ulong base,
- ulong size)
-{
- int i,ltype;
- ulong lbase, lsize;
-
- if (size > 0x2000000UL) {
- /* If we are to set up a region >32M then look at ARR7 immediately */
- getMTRR(7,&lbase,&lsize,&ltype);
- if (lsize < 1)
- return 7;
- }
- else {
- /* Check ARR0-6 registers */
- for (i = 0; i < 7; i++) {
- getMTRR(i,&lbase,&lsize,&ltype);
- if (lsize < 1)
- return i;
- }
- /* Try ARR7 but its size must be at least 256K */
- getMTRR(7,&lbase,&lsize,&ltype);
- if ((lsize < 1) && (size >= 0x40000))
- return i;
- }
- (void)base;
- return -1;
-}
-
-/****************************************************************************
-PARAMETERS:
-c - Place to store the machine context across the call
-
-REMARKS:
-Puts the processor into a state where MTRRs can be safely updated
-****************************************************************************/
-static void MTRR_beginUpdate(
- MTRRContext *c)
-{
- c->flags = _MTRR_disableInt();
- if (cpuFamily != CPU_AMD || (cpuFamily == CPU_AMD && cpuType >= CPU_AMDAthlon)) {
- switch (cpuFamily) {
- case CPU_Intel:
- case CPU_AMD:
- /* Disable MTRRs, and set the default type to uncached */
- c->cr4Val = _MTRR_saveCR4();
- _MTRR_readMSR(INTEL_defType_MSR,&c->defTypeLo,&c->defTypeHi);
- _MTRR_writeMSR(INTEL_defType_MSR,c->defTypeLo & 0xF300UL,c->defTypeHi);
- break;
- case CPU_Cyrix:
- c->ccr3 = _MTRR_getCx86(CX86_CCR3);
- _MTRR_setCx86(CX86_CCR3, (uchar)((c->ccr3 & 0x0F) | 0x10));
- break;
- }
- }
-}
-
-/****************************************************************************
-PARAMETERS:
-c - Place to restore the machine context from
-
-REMARKS:
-Restores the processor after updating any of the registers
-****************************************************************************/
-static void MTRR_endUpdate(
- MTRRContext *c)
-{
- if (cpuFamily != CPU_AMD || (cpuFamily == CPU_AMD && cpuType >= CPU_AMDAthlon)) {
- PM_flushTLB();
- switch (cpuFamily) {
- case CPU_Intel:
- case CPU_AMD:
- _MTRR_writeMSR(INTEL_defType_MSR,c->defTypeLo,c->defTypeHi);
- _MTRR_restoreCR4(c->cr4Val);
- break;
- case CPU_Cyrix:
- _MTRR_setCx86(CX86_CCR3,(uchar)c->ccr3);
- break;
- }
- }
-
- /* Re-enable interrupts (if enabled previously) */
- _MTRR_restoreInt(c->flags);
-}
-
-/****************************************************************************
-PARAMETERS:
-reg - MTRR register to read
-base - Place to store the starting physical base address of the region
-size - Place to store the size in bytes of the region
-type - Place to store the type of the MTRR register
-
-REMARKS:
-Intel specific function to read the value of a specific MTRR register.
-****************************************************************************/
-static void INTEL_getMTRR(
- uint reg,
- ulong *base,
- ulong *size,
- int *type)
-{
- ulong hi,maskLo,baseLo;
-
- _MTRR_readMSR(INTEL_physMask_MSR(reg),&maskLo,&hi);
- if ((maskLo & 0x800) == 0) {
- /* MTRR is disabled, so it is free */
- *base = 0;
- *size = 0;
- *type = 0;
- return;
- }
- _MTRR_readMSR(INTEL_physBase_MSR(reg),&baseLo,&hi);
- maskLo = (maskLo & 0xFFFFF000UL);
- *size = ~(maskLo - 1);
- *base = (baseLo & 0xFFFFF000UL);
- *type = (baseLo & 0xFF);
-}
-
-/****************************************************************************
-PARAMETERS:
-reg - MTRR register to set
-base - The starting physical base address of the region
-size - The size in bytes of the region
-type - Type to place into the MTRR register
-
-REMARKS:
-Intel specific function to set the value of a specific MTRR register to
-the passed in base, size and type.
-****************************************************************************/
-static void INTEL_setMTRR(
- uint reg,
- ulong base,
- ulong size,
- int type)
-{
- MTRRContext c;
-
- MTRR_beginUpdate(&c);
- if (size == 0) {
- /* The invalid bit is kept in the mask, so we simply clear the
- * relevant mask register to disable a range.
- */
- _MTRR_writeMSR(INTEL_physMask_MSR(reg),0,0);
- }
- else {
- _MTRR_writeMSR(INTEL_physBase_MSR(reg),base | type,0);
- _MTRR_writeMSR(INTEL_physMask_MSR(reg),~(size - 1) | 0x800,0);
- }
- MTRR_endUpdate(&c);
-}
-
-/****************************************************************************
-REMARKS:
-Disabled banked write combing for Intel processors. We always disable this
-because it invariably causes problems with older hardware.
-****************************************************************************/
-static void INTEL_disableBankedWriteCombine(void)
-{
- MTRRContext c;
-
- MTRR_beginUpdate(&c);
- _MTRR_writeMSR(INTEL_fix16K_A0000_MSR,0,0);
- MTRR_endUpdate(&c);
-}
-
-/****************************************************************************
-PARAMETERS:
-reg - MTRR register to set
-base - The starting physical base address of the region
-size - The size in bytes of the region
-type - Type to place into the MTRR register
-
-REMARKS:
-Intel specific function to set the value of a specific MTRR register to
-the passed in base, size and type.
-****************************************************************************/
-static void AMD_getMTRR(
- uint reg,
- ulong *base,
- ulong *size,
- int *type)
-{
- ulong low,high;
-
- /* Upper dword is region 1, lower is region 0 */
- _MTRR_readMSR(0xC0000085, &low, &high);
- if (reg == 1)
- low = high;
-
- /* Find the base and type for the region */
- *base = low & 0xFFFE0000;
- *type = 0;
- if (low & 1)
- *type = PM_MTRR_UNCACHABLE;
- if (low & 2)
- *type = PM_MTRR_WRCOMB;
- if ((low & 3) == 0) {
- *size = 0;
- return;
- }
-
- /* This needs a little explaining. The size is stored as an
- * inverted mask of bits of 128K granularity 15 bits long offset
- * 2 bits
- *
- * So to get a size we do invert the mask and add 1 to the lowest
- * mask bit (4 as its 2 bits in). This gives us a size we then shift
- * to turn into 128K blocks
- *
- * eg 111 1111 1111 1100 is 512K
- *
- * invert 000 0000 0000 0011
- * +1 000 0000 0000 0100
- * *128K ...
- */
- low = (~low) & 0x0FFFC;
- *size = (low + 4) << 15;
-}
-
-/****************************************************************************
-PARAMETERS:
-reg - MTRR register to set
-base - The starting physical base address of the region
-size - The size in bytes of the region
-type - Type to place into the MTRR register
-
-REMARKS:
-Intel specific function to set the value of a specific MTRR register to
-the passed in base, size and type.
-****************************************************************************/
-static void AMD_setMTRR(
- uint reg,
- ulong base,
- ulong size,
- int type)
-{
- ulong low,high,newVal;
- MTRRContext c;
-
- MTRR_beginUpdate(&c);
- _MTRR_readMSR(0xC0000085, &low, &high);
- if (size == 0) {
- /* Clear register to disable */
- if (reg)
- high = 0;
- else
- low = 0;
- }
- else {
- /* Set the register to the base (already shifted for us), the
- * type (off by one) and an inverted bitmask of the size
- * The size is the only odd bit. We are fed say 512K
- * We invert this and we get 111 1111 1111 1011 but
- * if you subtract one and invert you get the desired
- * 111 1111 1111 1100 mask
- */
- newVal = (((~(size-1)) >> 15) & 0x0001FFFC) | base | (type+1);
- if (reg)
- high = newVal;
- else
- low = newVal;
- }
-
- /* The writeback rule is quite specific. See the manual. Its
- * disable local interrupts, write back the cache, set the MTRR
- */
- PM_flushTLB();
- _MTRR_writeMSR(0xC0000085, low, high);
- MTRR_endUpdate(&c);
-}
-
-/****************************************************************************
-PARAMETERS:
-reg - MTRR register to set
-base - The starting physical base address of the region
-size - The size in bytes of the region
-type - Type to place into the MTRR register
-
-REMARKS:
-Intel specific function to set the value of a specific MTRR register to
-the passed in base, size and type.
-****************************************************************************/
-static void CYRIX_getMTRR(
- uint reg,
- ulong *base,
- ulong *size,
- int *type)
-{
- MTRRContext c;
- uchar arr = CX86_ARR_BASE + reg*3;
- uchar rcr,shift;
-
- /* Save flags and disable interrupts */
- MTRR_beginUpdate(&c);
- ((uchar*)base)[3] = _MTRR_getCx86(arr);
- ((uchar*)base)[2] = _MTRR_getCx86((uchar)(arr+1));
- ((uchar*)base)[1] = _MTRR_getCx86((uchar)(arr+2));
- rcr = _MTRR_getCx86((uchar)(CX86_RCR_BASE + reg));
- MTRR_endUpdate(&c);
-
- /* Enable interrupts if it was enabled previously */
- shift = ((uchar*)base)[1] & 0x0f;
- *base &= 0xFFFFF000UL;
-
- /* Power of two, at least 4K on ARR0-ARR6, 256K on ARR7
- * Note: shift==0xF means 4G, this is unsupported.
- */
- if (shift)
- *size = (reg < 7 ? 0x800UL : 0x20000UL) << shift;
- else
- *size = 0;
-
- /* Bit 0 is Cache Enable on ARR7, Cache Disable on ARR0-ARR6 */
- if (reg < 7) {
- switch (rcr) {
- case 1: *type = PM_MTRR_UNCACHABLE; break;
- case 8: *type = PM_MTRR_WRBACK; break;
- case 9: *type = PM_MTRR_WRCOMB; break;
- case 24:
- default: *type = PM_MTRR_WRTHROUGH; break;
- }
- }
- else {
- switch (rcr) {
- case 0: *type = PM_MTRR_UNCACHABLE; break;
- case 8: *type = PM_MTRR_WRCOMB; break;
- case 9: *type = PM_MTRR_WRBACK; break;
- case 25:
- default: *type = PM_MTRR_WRTHROUGH; break;
- }
- }
-}
-
-/****************************************************************************
-PARAMETERS:
-reg - MTRR register to set
-base - The starting physical base address of the region
-size - The size in bytes of the region
-type - Type to place into the MTRR register
-
-REMARKS:
-Intel specific function to set the value of a specific MTRR register to
-the passed in base, size and type.
-****************************************************************************/
-static void CYRIX_setMTRR(
- uint reg,
- ulong base,
- ulong size,
- int type)
-{
- MTRRContext c;
- uchar arr = CX86_ARR_BASE + reg*3;
- uchar arr_type,arr_size;
-
- /* Count down from 32M (ARR0-ARR6) or from 2G (ARR7) */
- size >>= (reg < 7 ? 12 : 18);
- size &= 0x7FFF; /* Make sure arr_size <= 14 */
- for (arr_size = 0; size; arr_size++, size >>= 1)
- ;
- if (reg < 7) {
- switch (type) {
- case PM_MTRR_UNCACHABLE: arr_type = 1; break;
- case PM_MTRR_WRCOMB: arr_type = 9; break;
- case PM_MTRR_WRTHROUGH: arr_type = 24; break;
- default: arr_type = 8; break;
- }
- }
- else {
- switch (type) {
- case PM_MTRR_UNCACHABLE: arr_type = 0; break;
- case PM_MTRR_WRCOMB: arr_type = 8; break;
- case PM_MTRR_WRTHROUGH: arr_type = 25; break;
- default: arr_type = 9; break;
- }
- }
- MTRR_beginUpdate(&c);
- _MTRR_setCx86((uchar)arr, ((uchar*)&base)[3]);
- _MTRR_setCx86((uchar)(arr+1), ((uchar*)&base)[2]);
- _MTRR_setCx86((uchar)(arr+2), (uchar)((((uchar*)&base)[1]) | arr_size));
- _MTRR_setCx86((uchar)(CX86_RCR_BASE + reg), (uchar)arr_type);
- MTRR_endUpdate(&c);
-}
-
-/****************************************************************************
-REMARKS:
-On Cyrix 6x86(MX) and MII the ARR3 is special: it has connection
-with the SMM (System Management Mode) mode. So we need the following:
-Check whether SMI_LOCK (CCR3 bit 0) is set
- if it is set, ARR3 cannot be changed (it cannot be changed until the
- next processor reset)
- if it is reset, then we can change it, set all the needed bits:
- - disable access to SMM memory through ARR3 range (CCR1 bit 7 reset)
- - disable access to SMM memory (CCR1 bit 2 reset)
- - disable SMM mode (CCR1 bit 1 reset)
- - disable write protection of ARR3 (CCR6 bit 1 reset)
- - (maybe) disable ARR3
-Just to be sure, we enable ARR usage by the processor (CCR5 bit 5 set)
-****************************************************************************/
-static void CYRIX_initARR(void)
-{
- MTRRContext c;
- uchar ccr[7];
- int ccrc[7] = { 0, 0, 0, 0, 0, 0, 0 };
-
- /* Begin updating */
- MTRR_beginUpdate(&c);
-
- /* Save all CCRs locally */
- ccr[0] = _MTRR_getCx86(CX86_CCR0);
- ccr[1] = _MTRR_getCx86(CX86_CCR1);
- ccr[2] = _MTRR_getCx86(CX86_CCR2);
- ccr[3] = (uchar)c.ccr3;
- ccr[4] = _MTRR_getCx86(CX86_CCR4);
- ccr[5] = _MTRR_getCx86(CX86_CCR5);
- ccr[6] = _MTRR_getCx86(CX86_CCR6);
- if (ccr[3] & 1)
- ccrc[3] = 1;
- else {
- /* Disable SMM mode (bit 1), access to SMM memory (bit 2) and
- * access to SMM memory through ARR3 (bit 7).
- */
- if (ccr[6] & 0x02) {
- ccr[6] &= 0xFD;
- ccrc[6] = 1; /* Disable write protection of ARR3. */
- _MTRR_setCx86(CX86_CCR6,ccr[6]);
- }
- }
-
- /* If we changed CCR1 in memory, change it in the processor, too. */
- if (ccrc[1])
- _MTRR_setCx86(CX86_CCR1,ccr[1]);
-
- /* Enable ARR usage by the processor */
- if (!(ccr[5] & 0x20)) {
- ccr[5] |= 0x20;
- ccrc[5] = 1;
- _MTRR_setCx86(CX86_CCR5,ccr[5]);
- }
-
- /* We are finished updating */
- MTRR_endUpdate(&c);
-}
-
-/****************************************************************************
-REMARKS:
-Initialise the MTRR module, by detecting the processor type and determining
-if the processor supports the MTRR functionality.
-****************************************************************************/
-void MTRR_init(void)
-{
- int i,cpu,ltype;
- ulong eax,edx,lbase,lsize;
-
- /* Check that we have a compatible CPU */
- if (numMTRR == -1) {
- numMTRR = 0;
- if (!_MTRR_isRing0())
- return;
- cpu = CPU_getProcessorType();
- cpuFamily = cpu & CPU_familyMask;
- cpuType = cpu & CPU_mask;
- cpuStepping = (cpu & CPU_steppingMask) >> CPU_steppingShift;
- switch (cpuFamily) {
- case CPU_Intel:
- /* Intel Pentium Pro and later support the MTRR registers */
- if (cpuType < CPU_PentiumPro)
- return;
- _MTRR_readMSR(INTEL_cap_MSR,&eax,&edx);
- numMTRR = eax & 0xFF;
- getMTRR = INTEL_getMTRR;
- setMTRR = INTEL_setMTRR;
- getFreeRegion = GENERIC_getFreeRegion;
- INTEL_disableBankedWriteCombine();
- break;
- case CPU_AMD:
- /* AMD K6-2 and later support the MTRR registers */
- if ((cpuType < CPU_AMDK6_2) || (cpuType == CPU_AMDK6_2 && cpuStepping < 8))
- return;
- if (cpuType < CPU_AMDAthlon) {
- numMTRR = 2; /* AMD CPU's have 2 MTRR's */
- getMTRR = AMD_getMTRR;
- setMTRR = AMD_setMTRR;
- getFreeRegion = AMDK6_getFreeRegion;
-
- /* For some reason some IBM systems with K6-2 processors
- * have write combined enabled for the system BIOS
- * region from 0xE0000 to 0xFFFFFF. We need *both* MTRR's
- * for our own graphics drivers, so if we detect any
- * regions below the 1Meg boundary, we remove them
- * so we can use this MTRR register ourselves.
- */
- for (i = 0; i < numMTRR; i++) {
- getMTRR(i,&lbase,&lsize,&ltype);
- if (lbase < 0x100000)
- setMTRR(i,0,0,0);
- }
- }
- else {
- /* AMD Athlon uses P6 style MTRR's */
- _MTRR_readMSR(INTEL_cap_MSR,&eax,&edx);
- numMTRR = eax & 0xFF;
- getMTRR = INTEL_getMTRR;
- setMTRR = INTEL_setMTRR;
- getFreeRegion = GENERIC_getFreeRegion;
- INTEL_disableBankedWriteCombine();
- }
- break;
- case CPU_Cyrix:
- /* Cyrix 6x86 and later support the MTRR registers */
- if (cpuType < CPU_Cyrix6x86 || cpuType >= CPU_CyrixMediaGX)
- return;
- numMTRR = 8; /* Cyrix CPU's have 8 ARR's */
- getMTRR = CYRIX_getMTRR;
- setMTRR = CYRIX_setMTRR;
- getFreeRegion = CYRIX_getFreeRegion;
- CYRIX_initARR();
- break;
- default:
- return;
- }
- }
-}
-
-/****************************************************************************
-PARAMETERS:
-base - The starting physical base address of the region
-size - The size in bytes of the region
-type - Type to place into the MTRR register
-
-RETURNS:
-Error code describing the result.
-
-REMARKS:
-Function to enable write combining for the specified region of memory.
-****************************************************************************/
-int MTRR_enableWriteCombine(
- ulong base,
- ulong size,
- uint type)
-{
- int i;
- int ltype;
- ulong lbase,lsize,last;
-
- /* Check that we have a CPU that supports MTRR's and type is valid */
- if (numMTRR <= 0) {
- if (!_MTRR_isRing0())
- return PM_MTRR_ERR_NO_OS_SUPPORT;
- return PM_MTRR_NOT_SUPPORTED;
- }
- if (type >= PM_MTRR_MAX)
- return PM_MTRR_ERR_PARAMS;
-
- /* If the type is WC, check that this processor supports it */
- if (!MTRR_haveWriteCombine())
- return PM_MTRR_ERR_NOWRCOMB;
-
- /* Adjust the boundaries depending on the CPU type */
- switch (cpuFamily) {
- case CPU_AMD:
- if (cpuType < CPU_AMDAthlon) {
- /* Apply the K6 block alignment and size rules. In order:
- * o Uncached or gathering only
- * o 128K or bigger block
- * o Power of 2 block
- * o base suitably aligned to the power
- */
- if (type > PM_MTRR_WRCOMB && (size < (1 << 17) || (size & ~(size-1))-size || (base & (size-1))))
- return PM_MTRR_ERR_NOT_ALIGNED;
- break;
- }
- /* Fall through for AMD Athlon which uses P6 style MTRR's */
- case CPU_Intel:
- case CPU_Cyrix:
- if ((base & 0xFFF) || (size & 0xFFF)) {
- /* Base and size must be multiples of 4Kb */
- return PM_MTRR_ERR_NOT_4KB_ALIGNED;
- }
- if (base < 0x100000) {
- /* Base must be >= 1Mb */
- return PM_MTRR_ERR_BELOW_1MB;
- }
-
- /* Check upper bits of base and last are equal and lower bits
- * are 0 for base and 1 for last
- */
- last = base + size - 1;
- for (lbase = base; !(lbase & 1) && (last & 1); lbase = lbase >> 1, last = last >> 1)
- ;
- if (lbase != last) {
- /* Base is not aligned on the correct boundary */
- return PM_MTRR_ERR_NOT_ALIGNED;
- }
- break;
- default:
- return PM_MTRR_NOT_SUPPORTED;
- }
-
- /* Search for existing MTRR */
- for (i = 0; i < numMTRR; ++i) {
- getMTRR(i,&lbase,&lsize,&ltype);
- if (lbase == 0 && lsize == 0)
- continue;
- if (base > lbase + (lsize-1))
- continue;
- if ((base < lbase) && (base+size-1 < lbase))
- continue;
-
- /* Check that we don't overlap an existing region */
- if (type != PM_MTRR_UNCACHABLE) {
- if ((base < lbase) || (base+size-1 > lbase+lsize-1))
- return PM_MTRR_ERR_OVERLAP;
- }
- else if (base == lbase && size == lsize) {
- /* The region already exists so leave it alone */
- return PM_MTRR_ERR_OK;
- }
-
- /* New region is enclosed by an existing region, so only allow
- * a new type to be created if we are setting a region to be
- * uncacheable (such as MMIO registers within a framebuffer).
- */
- if (ltype != (int)type) {
- if (type == PM_MTRR_UNCACHABLE)
- continue;
- return PM_MTRR_ERR_TYPE_MISMATCH;
- }
- return PM_MTRR_ERR_OK;
- }
-
- /* Search for an empty MTRR */
- if ((i = getFreeRegion(base,size)) < 0)
- return PM_MTRR_ERR_NONE_FREE;
- setMTRR(i,base,size,type);
- return PM_MTRR_ERR_OK;
-}
-
-/****************************************************************************
-PARAMETERS:
-callback - Function to callback with write combine information
-
-REMARKS:
-Function to enumerate all write combine regions currently enabled for the
-processor.
-****************************************************************************/
-int PMAPI PM_enumWriteCombine(
- PM_enumWriteCombine_t callback)
-{
- int i,ltype;
- ulong lbase,lsize;
-
- /* Check that we have a CPU that supports MTRR's and type is valid */
- if (numMTRR <= 0) {
- if (!_MTRR_isRing0())
- return PM_MTRR_ERR_NO_OS_SUPPORT;
- return PM_MTRR_NOT_SUPPORTED;
- }
-
- /* Enumerate all existing MTRR's */
- for (i = 0; i < numMTRR; ++i) {
- getMTRR(i,&lbase,&lsize,&ltype);
- callback(lbase,lsize,ltype);
- }
- return PM_MTRR_ERR_OK;
-}
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/pcilib.c b/board/MAI/bios_emulator/scitech/src/pm/common/pcilib.c
deleted file mode 100644
index 1d542fc5df..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/pcilib.c
+++ /dev/null
@@ -1,747 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Module for interfacing to the PCI bus and configuration
-* space registers.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "pcilib.h"
-#if !defined(__WIN32_VXD__) && !defined(__NT_DRIVER__)
-#include <string.h>
-#endif
-
-/*---------------------- Macros and type definitions ----------------------*/
-
-#pragma pack(1)
-
-/* Length of the memory mapping for the PCI BIOS */
-
-#define BIOS_LIMIT (128 * 1024L - 1)
-
-/* Macros for accessing the PCI BIOS functions from 32-bit protected mode */
-
-#define BIOS32_SIGNATURE (((ulong)'_' << 0) + ((ulong)'3' << 8) + ((ulong)'2' << 16) + ((ulong)'_' << 24))
-#define PCI_SIGNATURE (((ulong)'P' << 0) + ((ulong)'C' << 8) + ((ulong)'I' << 16) + ((ulong)' ' << 24))
-#define PCI_SERVICE (((ulong)'$' << 0) + ((ulong)'P' << 8) + ((ulong)'C' << 16) + ((ulong)'I' << 24))
-#define PCI_BIOS_PRESENT 0xB101
-#define FIND_PCI_DEVICE 0xB102
-#define FIND_PCI_CLASS 0xB103
-#define GENERATE_SPECIAL 0xB106
-#define READ_CONFIG_BYTE 0xB108
-#define READ_CONFIG_WORD 0xB109
-#define READ_CONFIG_DWORD 0xB10A
-#define WRITE_CONFIG_BYTE 0xB10B
-#define WRITE_CONFIG_WORD 0xB10C
-#define WRITE_CONFIG_DWORD 0xB10D
-#define GET_IRQ_ROUTING_OPT 0xB10E
-#define SET_PCI_IRQ 0xB10F
-
-/* This is the standard structure used to identify the entry point to the
- * BIOS32 Service Directory, as documented in PCI 2.1 BIOS Specicition.
- */
-
-typedef union {
- struct {
- ulong signature; /* _32_ */
- ulong entry; /* 32 bit physical address */
- uchar revision; /* Revision level, 0 */
- uchar length; /* Length in paragraphs should be 01 */
- uchar checksum; /* All bytes must add up to zero */
- uchar reserved[5]; /* Must be zero */
- } fields;
- char chars[16];
- } PCI_bios32;
-
-/* Structure for a far pointer to call the PCI BIOS services with */
-
-typedef struct {
- ulong address;
- ushort segment;
- } PCIBIOS_entry;
-
-/* Macros to copy a structure that includes dwSize members */
-
-#define COPY_STRUCTURE(d,s) memcpy(d,s,MIN((s)->dwSize,(d)->dwSize))
-
-#pragma pack()
-
-/*--------------------------- Global variables ----------------------------*/
-
-static uchar *BIOSImage = NULL; /* BIOS image mapping */
-static int PCIBIOSVersion = -1;/* PCI BIOS version */
-static PCIBIOS_entry PCIEntry; /* PCI services entry point */
-static ulong PCIPhysEntry = 0; /* Physical address */
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* External assembler helper functions */
-
-uchar _ASMAPI _BIOS32_service(ulong service,ulong function,ulong *physBase,ulong *length,ulong *serviceOffset,PCIBIOS_entry entry);
-ushort _ASMAPI _PCIBIOS_isPresent(ulong i_eax,ulong *o_edx,ushort *o_ax,uchar *o_cl,PCIBIOS_entry entry);
-ulong _ASMAPI _PCIBIOS_service(ulong r_eax,ulong r_ebx,ulong r_edi,ulong r_ecx,PCIBIOS_entry entry);
-int _ASMAPI _PCIBIOS_getRouting(PCIRoutingOptionsBuffer *buf,PCIBIOS_entry entry);
-ibool _ASMAPI _PCIBIOS_setIRQ(int busDev,int intPin,int IRQ,PCIBIOS_entry entry);
-ulong _ASMAPI _PCIBIOS_specialCycle(int bus,ulong data,PCIBIOS_entry entry);
-ushort _ASMAPI _PCI_getCS(void);
-
-/****************************************************************************
-REMARKS:
-This functions returns the physical address of the PCI BIOS entry point.
-****************************************************************************/
-ulong _ASMAPI PCIBIOS_getEntry(void)
-{ return PCIPhysEntry; }
-
-/****************************************************************************
-PARAMETERS:
-hwType - Place to store the PCI hardware access mechanism flags
-lastBus - Place to store the index of the last PCI bus in the system
-
-RETURNS:
-Version number of the PCI BIOS found.
-
-REMARKS:
-This function determines if the PCI BIOS is present in the system, and if
-so returns the information returned by the PCI BIOS detect function.
-****************************************************************************/
-static int PCIBIOS_detect(
- uchar *hwType,
- uchar *lastBus)
-{
- ulong signature;
- ushort stat,version;
-
-#ifndef __16BIT__
- PCIBIOS_entry BIOSEntry = {0};
- uchar *BIOSEnd;
- PCI_bios32 *BIOSDir;
- ulong physBase,length,offset;
-
- /* Bail if we have already detected no BIOS is present */
- if (PCIBIOSVersion == 0)
- return 0;
-
- /* First scan the memory from 0xE0000 to 0xFFFFF looking for the
- * BIOS32 service directory, so we can determine if we can call it
- * from 32-bit protected mode.
- */
- if (PCIBIOSVersion == -1) {
- PCIBIOSVersion = 0;
- BIOSImage = PM_mapPhysicalAddr(0xE0000,BIOS_LIMIT,false);
- if (!BIOSImage)
- return 0;
- BIOSEnd = BIOSImage + 0x20000;
- for (BIOSDir = (PCI_bios32*)BIOSImage; BIOSDir < (PCI_bios32*)BIOSEnd; BIOSDir++) {
- uchar sum;
- int i,length;
-
- if (BIOSDir->fields.signature != BIOS32_SIGNATURE)
- continue;
- length = BIOSDir->fields.length * 16;
- if (!length)
- continue;
- for (sum = i = 0; i < length ; i++)
- sum += BIOSDir->chars[i];
- if (sum != 0)
- continue;
- BIOSEntry.address = (ulong)BIOSImage + (BIOSDir->fields.entry - 0xE0000);
- BIOSEntry.segment = _PCI_getCS();
- break;
- }
-
- /* If we found the BIOS32 directory, call it to get the address of the
- * PCI services.
- */
- if (BIOSEntry.address == 0)
- return 0;
- if (_BIOS32_service(PCI_SERVICE,0,&physBase,&length,&offset,BIOSEntry) != 0)
- return 0;
- PCIPhysEntry = physBase + offset;
- PCIEntry.address = (ulong)BIOSImage + (PCIPhysEntry - 0xE0000);
- PCIEntry.segment = _PCI_getCS();
- }
-#endif
- /* We found the BIOS entry, so now do the version check */
- version = _PCIBIOS_isPresent(PCI_BIOS_PRESENT,&signature,&stat,lastBus,PCIEntry);
- if (version > 0 && ((stat >> 8) == 0) && signature == PCI_SIGNATURE) {
- *hwType = stat & 0xFF;
- return PCIBIOSVersion = version;
- }
- return 0;
-}
-
-/****************************************************************************
-PARAMETERS:
-info - Array of PCIDeviceInfo structures to check against
-index - Index of the current device to check
-
-RETURNS:
-True if the device is a duplicate, false if not.
-
-REMARKS:
-This function goes through the list of all devices preceeding the newly
-found device in the info structure, and checks that the device is not a
-duplicate of a previous device. Some devices incorrectly enumerate
-themselves at different function addresses so we check here to exclude
-those cases.
-****************************************************************************/
-static ibool CheckDuplicate(
- PCIDeviceInfo *info,
- PCIDeviceInfo *prev)
-{
- /* Ignore devices with a vendor ID of 0 */
- if (info->VendorID == 0)
- return true;
-
- /* NOTE: We only check against the current device on
- * the bus to ensure that we do not exclude
- * multiple controllers of the same device ID.
- */
- if (info->slot.p.Bus == prev->slot.p.Bus &&
- info->slot.p.Device == prev->slot.p.Device &&
- info->DeviceID == prev->DeviceID)
- return true;
- return false;
-}
-
-/****************************************************************************
-PARAMETERS:
-info - Array of PCIDeviceInfo structures to fill in
-maxDevices - Maximum number of of devices to enumerate into array
-
-RETURNS:
-Number of PCI devices found and enumerated on the PCI bus, 0 if not PCI.
-
-REMARKS:
-Function to enumerate all available devices on the PCI bus into an array
-of configuration information blocks.
-****************************************************************************/
-static int PCI_enumerateMech1(
- PCIDeviceInfo info[])
-{
- int bus,device,function,i,numFound = 0;
- ulong *lp,tmp;
- PCIslot slot = {{0,0,0,0,0,0,1}};
- PCIDeviceInfo pci,prev = {0};
-
- /* Try PCI access mechanism 1 */
- PM_outpb(0xCFB,0x01);
- tmp = PM_inpd(0xCF8);
- PM_outpd(0xCF8,slot.i);
- if ((PM_inpd(0xCF8) == slot.i) && (PM_inpd(0xCFC) != 0xFFFFFFFFUL)) {
- /* PCI access mechanism 1 - the preferred mechanism */
- for (bus = 0; bus < 8; bus++) {
- slot.p.Bus = bus;
- for (device = 0; device < 32; device++) {
- slot.p.Device = device;
- for (function = 0; function < 8; function++) {
- slot.p.Function = function;
- slot.p.Register = 0;
- PM_outpd(0xCF8,slot.i);
- if (PM_inpd(0xCFC) != 0xFFFFFFFFUL) {
- memset(&pci,0,sizeof(pci));
- pci.dwSize = sizeof(pci);
- pci.mech1 = 1;
- pci.slot = slot;
- lp = (ulong*)&(pci.VendorID);
- for (i = 0; i < NUM_PCI_REG; i++, lp++) {
- slot.p.Register = i;
- PM_outpd(0xCF8,slot.i);
- *lp = PM_inpd(0xCFC);
- }
- if (!CheckDuplicate(&pci,&prev)) {
- if (info)
- COPY_STRUCTURE(&info[numFound],&pci);
- ++numFound;
- }
- prev = pci;
- }
- }
- }
- }
-
- /* Disable PCI config cycle on exit */
- PM_outpd(0xCF8,0);
- return numFound;
- }
- PM_outpd(0xCF8,tmp);
-
- /* No hardware access mechanism 1 found */
- return 0;
-}
-
-/****************************************************************************
-PARAMETERS:
-info - Array of PCIDeviceInfo structures to fill in
-maxDevices - Maximum number of of devices to enumerate into array
-
-RETURNS:
-Number of PCI devices found and enumerated on the PCI bus, 0 if not PCI.
-
-REMARKS:
-Function to enumerate all available devices on the PCI bus into an array
-of configuration information blocks.
-****************************************************************************/
-static int PCI_enumerateMech2(
- PCIDeviceInfo info[])
-{
- int bus,device,function,i,numFound = 0;
- ushort deviceIO;
- ulong *lp;
- PCIslot slot = {{0,0,0,0,0,0,1}};
- PCIDeviceInfo pci,prev = {0};
-
- /* Try PCI access mechanism 2 */
- PM_outpb(0xCFB,0x00);
- PM_outpb(0xCF8,0x00);
- PM_outpb(0xCFA,0x00);
- if (PM_inpb(0xCF8) == 0x00 && PM_inpb(0xCFB) == 0x00) {
- /* PCI access mechanism 2 - the older mechanism for legacy busses */
- for (bus = 0; bus < 2; bus++) {
- slot.p.Bus = bus;
- PM_outpb(0xCFA,(uchar)bus);
- for (device = 0; device < 16; device++) {
- slot.p.Device = device;
- deviceIO = 0xC000 + (device << 8);
- for (function = 0; function < 8; function++) {
- slot.p.Function = function;
- slot.p.Register = 0;
- PM_outpb(0xCF8,(uchar)((function << 1) | 0x10));
- if (PM_inpd(deviceIO) != 0xFFFFFFFFUL) {
- memset(&pci,0,sizeof(pci));
- pci.dwSize = sizeof(pci);
- pci.mech1 = 0;
- pci.slot = slot;
- lp = (ulong*)&(pci.VendorID);
- for (i = 0; i < NUM_PCI_REG; i++, lp++) {
- slot.p.Register = i;
- *lp = PM_inpd(deviceIO + (i << 2));
- }
- if (!CheckDuplicate(&pci,&prev)) {
- if (info)
- COPY_STRUCTURE(&info[numFound],&pci);
- ++numFound;
- }
- prev = pci;
- }
- }
- }
- }
-
- /* Disable PCI config cycle on exit */
- PM_outpb(0xCF8,0);
- return numFound;
- }
-
- /* No hardware access mechanism 2 found */
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-This functions reads a configuration dword via the PCI BIOS.
-****************************************************************************/
-static ulong PCIBIOS_readDWORD(
- int index,
- ulong slot)
-{
- return (ulong)_PCIBIOS_service(READ_CONFIG_DWORD,slot >> 8,index,0,PCIEntry);
-}
-
-/****************************************************************************
-PARAMETERS:
-info - Array of PCIDeviceInfo structures to fill in
-maxDevices - Maximum number of of devices to enumerate into array
-
-RETURNS:
-Number of PCI devices found and enumerated on the PCI bus, 0 if not PCI.
-
-REMARKS:
-Function to enumerate all available devices on the PCI bus into an array
-of configuration information blocks.
-****************************************************************************/
-static int PCI_enumerateBIOS(
- PCIDeviceInfo info[])
-{
- uchar hwType,lastBus;
- int bus,device,function,i,numFound = 0;
- ulong *lp;
- PCIslot slot = {{0,0,0,0,0,0,1}};
- PCIDeviceInfo pci,prev = {0};
-
- if (PCIBIOS_detect(&hwType,&lastBus)) {
- /* PCI BIOS access - the ultimate fallback */
- for (bus = 0; bus <= lastBus; bus++) {
- slot.p.Bus = bus;
- for (device = 0; device < 32; device++) {
- slot.p.Device = device;
- for (function = 0; function < 8; function++) {
- slot.p.Function = function;
- if (PCIBIOS_readDWORD(0,slot.i) != 0xFFFFFFFFUL) {
- memset(&pci,0,sizeof(pci));
- pci.dwSize = sizeof(pci);
- pci.mech1 = 2;
- pci.slot = slot;
- lp = (ulong*)&(pci.VendorID);
- for (i = 0; i < NUM_PCI_REG; i++, lp++)
- *lp = PCIBIOS_readDWORD(i << 2,slot.i);
- if (!CheckDuplicate(&pci,&prev)) {
- if (info)
- COPY_STRUCTURE(&info[numFound],&pci);
- ++numFound;
- }
- prev = pci;
- }
- }
- }
- }
- }
-
- /* Return number of devices found */
- return numFound;
-}
-
-/****************************************************************************
-PARAMETERS:
-info - Array of PCIDeviceInfo structures to fill in
-maxDevices - Maximum number of of devices to enumerate into array
-
-RETURNS:
-Number of PCI devices found and enumerated on the PCI bus, 0 if not PCI.
-
-REMARKS:
-Function to enumerate all available devices on the PCI bus into an array
-of configuration information blocks.
-****************************************************************************/
-int _ASMAPI PCI_enumerate(
- PCIDeviceInfo info[])
-{
- int numFound;
-
- /* First try via the direct access mechanisms which are faster if we
- * have them (nearly always). The BIOS is used as a fallback, and for
- * stuff we can't do directly.
- */
- if ((numFound = PCI_enumerateMech1(info)) == 0) {
- if ((numFound = PCI_enumerateMech2(info)) == 0) {
- if ((numFound = PCI_enumerateBIOS(info)) == 0)
- return 0;
- }
- }
- return numFound;
-}
-
-/****************************************************************************
-PARAMETERS:
-info - Array of PCIDeviceInfo structures to fill in
-maxDevices - Maximum number of of devices to enumerate into array
-
-RETURNS:
-Number of PCI devices found and enumerated on the PCI bus, 0 if not PCI.
-
-REMARKS:
-Function to enumerate all available devices on the PCI bus into an array
-of configuration information blocks.
-****************************************************************************/
-int _ASMAPI PCI_getNumDevices(void)
-{
- return PCI_enumerate(NULL);
-}
-
-/****************************************************************************
-PARAMETERS:
-bar - Base address to measure
-pci - PCI device to access
-
-RETURNS:
-Size of the PCI base address in bytes
-
-REMARKS:
-This function measures the size of the PCI base address register in bytes,
-by writing all F's to the register, and reading the value back. The size
-of the base address is determines by the bits that are hardwired to zero's.
-****************************************************************************/
-ulong _ASMAPI PCI_findBARSize(
- int bar,
- PCIDeviceInfo *pci)
-{
- ulong base,size = 0;
-
- base = PCI_accessReg(bar,0,PCI_READ_DWORD,pci);
- if (base && !(base & 0x1)) {
- /* For some strange reason some devices don't properly decode
- * their base address registers (Intel PCI/PCI bridges!), and
- * we read completely bogus values. We check for that here
- * and clear out those BAR's.
- *
- * We check for that here because at least the low 12 bits
- * of the address range must be zeros, since the page size
- * on IA32 processors is always 4Kb.
- */
- if ((base & 0xFFF) == 0) {
- PCI_accessReg(bar,0xFFFFFFFF,PCI_WRITE_DWORD,pci);
- size = PCI_accessReg(bar,0,PCI_READ_DWORD,pci) & ~0xFF;
- size = ~size+1;
- PCI_accessReg(bar,base,PCI_WRITE_DWORD,pci);
- }
- }
- pci->slot.p.Register = 0;
- return size;
-}
-
-/****************************************************************************
-PARAMETERS:
-index - DWORD index of the register to access
-value - Value to write to the register for write access
-func - Function to implement
-
-RETURNS:
-The value read from the register for read operations
-
-REMARKS:
-The function code are defined as follows
-
-code - function
-0 - Read BYTE
-1 - Read WORD
-2 - Read DWORD
-3 - Write BYTE
-4 - Write WORD
-5 - Write DWORD
-****************************************************************************/
-ulong _ASMAPI PCI_accessReg(
- int index,
- ulong value,
- int func,
- PCIDeviceInfo *info)
-{
- int iobase;
-
- if (info->mech1 == 2) {
- /* Use PCI BIOS access since we dont have direct hardware access */
- switch (func) {
- case PCI_READ_BYTE:
- return (uchar)_PCIBIOS_service(READ_CONFIG_BYTE,info->slot.i >> 8,index,0,PCIEntry);
- case PCI_READ_WORD:
- return (ushort)_PCIBIOS_service(READ_CONFIG_WORD,info->slot.i >> 8,index,0,PCIEntry);
- case PCI_READ_DWORD:
- return (ulong)_PCIBIOS_service(READ_CONFIG_DWORD,info->slot.i >> 8,index,0,PCIEntry);
- case PCI_WRITE_BYTE:
- _PCIBIOS_service(WRITE_CONFIG_BYTE,info->slot.i >> 8,index,value,PCIEntry);
- break;
- case PCI_WRITE_WORD:
- _PCIBIOS_service(WRITE_CONFIG_WORD,info->slot.i >> 8,index,value,PCIEntry);
- break;
- case PCI_WRITE_DWORD:
- _PCIBIOS_service(WRITE_CONFIG_DWORD,info->slot.i >> 8,index,value,PCIEntry);
- break;
- }
- }
- else {
- /* Use direct hardware access mechanisms */
- if (info->mech1) {
- /* PCI access mechanism 1 */
- iobase = 0xCFC + (index & 3);
- info->slot.p.Register = index >> 2;
- PM_outpd(0xCF8,info->slot.i);
- }
- else {
- /* PCI access mechanism 2 */
- PM_outpb(0xCF8,(uchar)((info->slot.p.Function << 1) | 0x10));
- PM_outpb(0xCFA,(uchar)info->slot.p.Bus);
- iobase = 0xC000 + (info->slot.p.Device << 8) + index;
- }
- switch (func) {
- case PCI_READ_BYTE:
- case PCI_READ_WORD:
- case PCI_READ_DWORD: value = PM_inpd(iobase); break;
- case PCI_WRITE_BYTE: PM_outpb(iobase,(uchar)value); break;
- case PCI_WRITE_WORD: PM_outpw(iobase,(ushort)value); break;
- case PCI_WRITE_DWORD: PM_outpd(iobase,(ulong)value); break;
- }
- PM_outpd(0xCF8,0);
- }
- return value;
-}
-
-/****************************************************************************
-PARAMETERS:
-numDevices - Number of devices to query info for
-
-RETURNS:
-0 on success, -1 on error, number of devices to enumerate if numDevices = 0
-
-REMARKS:
-This function reads the PCI routing information. If you pass a value of
-0 for numDevices, this function will return with the number of devices
-needed in the routing buffer that will be filled in by the BIOS.
-****************************************************************************/
-ibool _ASMAPI PCI_getIRQRoutingOptions(
- int numDevices,
- PCIRouteInfo *buffer)
-{
- PCIRoutingOptionsBuffer buf;
- int ret;
-
- if (PCIPhysEntry) {
- buf.BufferSize = numDevices * sizeof(PCIRouteInfo);
- buf.DataBuffer = buffer;
- if ((ret = _PCIBIOS_getRouting(&buf,PCIEntry)) == 0x89)
- return buf.BufferSize / sizeof(PCIRouteInfo);
- if (ret != 0)
- return -1;
- return 0;
- }
-
- /* We currently only support this via the PCI BIOS functions */
- return -1;
-}
-
-/****************************************************************************
-PARAMETERS:
-info - PCI device information for the specified device
-intPin - Value to store in the PCI InterruptPin register
-IRQ - New ISA IRQ to map the PCI interrupt to (0-15)
-
-RETURNS:
-True on success, or false if this function failed.
-
-REMARKS:
-This function changes the PCI IRQ routing for the specified device to the
-desired PCI interrupt and the desired ISA bus compatible IRQ. This function
-may not be supported by the PCI BIOS, in which case this function will
-fail.
-****************************************************************************/
-ibool _ASMAPI PCI_setHardwareIRQ(
- PCIDeviceInfo *info,
- uint intPin,
- uint IRQ)
-{
- if (PCIPhysEntry) {
- if (_PCIBIOS_setIRQ(info->slot.i >> 8,intPin,IRQ,PCIEntry)) {
- info->u.type0.InterruptPin = intPin;
- info->u.type0.InterruptLine = IRQ;
- return true;
- }
- return false;
- }
-
- /* We currently only support this via the PCI BIOS functions */
- return false;
-}
-
-/****************************************************************************
-PARAMETERS:
-bus - Bus number to generate the special cycle for
-specialCycleData - Data to send for the special cyle
-
-REMARKS:
-This function generates a special cycle on the specified bus using with
-the specified data.
-****************************************************************************/
-void _ASMAPI PCI_generateSpecialCyle(
- uint bus,
- ulong specialCycleData)
-{
- if (PCIPhysEntry)
- _PCIBIOS_specialCycle(bus,specialCycleData,PCIEntry);
- /* We currently only support this via the PCI BIOS functions */
-}
-
-/****************************************************************************
-PARAMETERS:
-info - PCI device information block for device to access
-index - Index of register to start reading from
-dst - Place to store the values read from configuration space
-count - Count of bytes to read from configuration space
-
-REMARKS:
-This function is used to read a block of PCI configuration space registers
-from the configuration space into the passed in data block. This function
-will properly handle reading non-DWORD aligned data from the configuration
-space correctly.
-****************************************************************************/
-void _ASMAPI PCI_readRegBlock(
- PCIDeviceInfo *info,
- int index,
- void *dst,
- int count)
-{
- uchar *pb;
- ulong *pd;
- int i;
- int startCount = (index & 3);
- int middleCount = (count - startCount) >> 2;
- int endCount = count - middleCount * 4 - startCount;
-
- for (i = 0,pb = dst; i < startCount; i++, index++) {
- *pb++ = (uchar)PCI_accessReg(index,0,PCI_READ_BYTE,info);
- }
- for (i = 0,pd = (ulong*)pb; i < middleCount; i++, index += 4) {
- *pd++ = (ulong)PCI_accessReg(index,0,PCI_READ_DWORD,info);
- }
- for (i = 0,pb = (uchar*)pd; i < endCount; i++, index++) {
- *pb++ = (uchar)PCI_accessReg(index,0,PCI_READ_BYTE,info);
- }
-}
-
-/****************************************************************************
-PARAMETERS:
-info - PCI device information block for device to access
-index - Index of register to start reading from
-dst - Place to store the values read from configuration space
-count - Count of bytes to read from configuration space
-
-REMARKS:
-This function is used to write a block of PCI configuration space registers
-to the configuration space from the passed in data block. This function
-will properly handle writing non-DWORD aligned data to the configuration
-space correctly.
-****************************************************************************/
-void _ASMAPI PCI_writeRegBlock(
- PCIDeviceInfo *info,
- int index,
- void *src,
- int count)
-{
- uchar *pb;
- ulong *pd;
- int i;
- int startCount = (index & 3);
- int middleCount = (count - startCount) >> 2;
- int endCount = count - middleCount * 4 - startCount;
-
- for (i = 0,pb = src; i < startCount; i++, index++) {
- PCI_accessReg(index,*pb++,PCI_WRITE_BYTE,info);
- }
- for (i = 0,pd = (ulong*)pb; i < middleCount; i++, index += 4) {
- PCI_accessReg(index,*pd++,PCI_WRITE_DWORD,info);
- }
- for (i = 0,pb = (uchar*)pd; i < endCount; i++, index++) {
- PCI_accessReg(index,*pb++,PCI_WRITE_BYTE,info);
- }
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/unixio.c b/board/MAI/bios_emulator/scitech/src/pm/common/unixio.c
deleted file mode 100644
index c3a66a7c14..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/unixio.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Module containing Unix I/O functions.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/stat.h>
-#include <unistd.h>
-#include <dirent.h>
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* {secret} */
-typedef struct {
- DIR *d;
- char path[PM_MAX_PATH];
- char mask[PM_MAX_PATH];
- } PM_findHandle;
-
-/****************************************************************************
-REMARKS:
-Internal function to convert the find data to the generic interface.
-****************************************************************************/
-static void convertFindData(
- PM_findData *findData,
- struct dirent *blk,
- const char *path)
-{
- ulong dwSize = findData->dwSize;
- struct stat st;
- char filename[PM_MAX_PATH];
-
- memset(findData,0,findData->dwSize);
- findData->dwSize = dwSize;
- strcpy(filename,path);
- PM_backslash(filename);
- strcat(filename,blk->d_name);
- stat(filename,&st);
- if (!(st.st_mode & S_IWRITE))
- findData->attrib |= PM_FILE_READONLY;
- if (st.st_mode & S_IFDIR)
- findData->attrib |= PM_FILE_DIRECTORY;
- findData->sizeLo = st.st_size;
- findData->sizeHi = 0;
- strncpy(findData->name,blk->d_name,PM_MAX_PATH);
- findData->name[PM_MAX_PATH-1] = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Determines if a file name matches the passed in pattern.
-****************************************************************************/
-static ibool filematch(
- char *pattern,
- char *dirpath,
- struct dirent *dire)
-{
- struct stat st;
- int i = 0,j = 0,lastchar = '\0';
- char fullpath[PM_MAX_PATH];
-
- strcpy(fullpath,dirpath);
- PM_backslash(fullpath);
- strcat(fullpath, dire->d_name);
- if (stat(fullpath, &st) != 0)
- return false;
- for (; i < (int)strlen(dire->d_name) && j < (int)strlen(pattern); i++, j++) {
- if (pattern[j] == '*' && lastchar != '\\') {
- if (pattern[j+1] == '\0')
- return true;
- while (dire->d_name[i++] != pattern[j+1]) {
- if (dire->d_name[i] == '\0')
- return false;
- }
- i -= 2;
- }
- else if (dire->d_name[i] != pattern[j] &&
- !(pattern[j] == '?' && lastchar != '\\'))
- return false;
- lastchar = pattern[i];
- }
- if (j == (int)strlen(pattern) && i == (int)strlen(dire->d_name))
- return true;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-void * PMAPI PM_findFirstFile(
- const char *filename,
- PM_findData *findData)
-{
- PM_findHandle *d;
- struct dirent *dire;
- char name[PM_MAX_PATH];
- char ext[PM_MAX_PATH];
-
- if ((d = PM_malloc(sizeof(*d))) == NULL)
- return PM_FILE_INVALID;
- PM_splitpath(filename,NULL,d->path,name,ext);
- strcpy(d->mask,name);
- strcat(d->mask,ext);
- if (strlen(d->path) == 0)
- strcpy(d->path, ".");
- if (d->path[strlen(d->path)-1] == '/')
- d->path[strlen(d->path)-1] = 0;
- if ((d->d = opendir(d->path)) != NULL) {
- while ((dire = readdir(d->d)) != NULL) {
- if (filematch(d->mask,d->path,dire)) {
- convertFindData(findData,dire,d->path);
- return d;
- }
- }
- closedir(d->d);
- }
- PM_free(d);
- return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
- void *handle,
- PM_findData *findData)
-{
- PM_findHandle *d = handle;
- struct dirent *dire;
-
- while ((dire = readdir(d->d)) != NULL) {
- if (filematch(d->mask,d->path,dire)) {
- convertFindData(findData,dire,d->path);
- return true;
- }
- }
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
- void *handle)
-{
- PM_findHandle *d = handle;
-
- closedir(d->d);
- free(d);
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
- 1 - Drive A:
- 2 - Drive B:
- 3 - Drive C:
- etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
- char drive)
-{
- if (drive == 3)
- return true;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
- int drive,
- char *dir,
- int len)
-{
- (void)drive;
- getcwd(dir,len);
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
- const char *filename,
- uint attrib)
-{
- struct stat st;
- mode_t mode;
-
- stat(filename,&st);
- mode = st.st_mode;
- if (attrib & PM_FILE_READONLY)
- mode &= ~S_IWRITE;
- else
- mode |= S_IWRITE;
- chmod(filename,mode);
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file attributes for a specific file.
-****************************************************************************/
-uint PMAPI PM_getFileAttr(
- const char *filename)
-{
- struct stat st;
-
- stat(filename,&st);
- if (st.st_mode & S_IWRITE)
- return 0;
- return PM_FILE_READONLY;
-}
-
-/****************************************************************************
-REMARKS:
-Function to create a directory.
-****************************************************************************/
-ibool PMAPI PM_mkdir(
- const char *filename)
-{
- return mkdir(filename,0x1FF) == 0;
-}
-
-/****************************************************************************
-REMARKS:
-Function to remove a directory.
-****************************************************************************/
-ibool PMAPI PM_rmdir(
- const char *filename)
-{
- return rmdir(filename) == 0;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_getFileTime(
- const char *filename,
- ibool gmTime,
- PM_time *time)
-{
- /* TODO: Implement this! */
- (void)filename;
- (void)gmTime;
- (void)time;
- PM_fatalError("PM_getFileTime not implemented yet!");
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to set the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_setFileTime(
- const char *filename,
- ibool gmTime,
- PM_time *time)
-{
- /* TODO: Implement this! */
- (void)filename;
- (void)gmTime;
- (void)time;
- PM_fatalError("PM_setFileTime not implemented yet!");
- return false;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/common/vgastate.c b/board/MAI/bios_emulator/scitech/src/pm/common/vgastate.c
deleted file mode 100644
index 8056e9a33f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/common/vgastate.c
+++ /dev/null
@@ -1,377 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Portions copyright (C) Josh Vanderhoof
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Functions to save and restore the VGA hardware state.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#if defined(__WIN32_VXD__) || defined(__NT_DRIVER__)
-#include "sdd/sddhelp.h"
-#else
-#include <string.h>
-#endif
-
-/*--------------------------- Global variables ----------------------------*/
-
-/* VGA index register ports */
-#define CRT_I 0x3D4 /* CRT Controller Index */
-#define ATT_IW 0x3C0 /* Attribute Controller Index & Data */
-#define GRA_I 0x3CE /* Graphics Controller Index */
-#define SEQ_I 0x3C4 /* Sequencer Index */
-
-/* VGA data register ports */
-#define CRT_D 0x3D5 /* CRT Controller Data Register */
-#define ATT_R 0x3C1 /* Attribute Controller Data Read Register */
-#define GRA_D 0x3CF /* Graphics Controller Data Register */
-#define SEQ_D 0x3C5 /* Sequencer Data Register */
-#define MIS_R 0x3CC /* Misc Output Read Register */
-#define MIS_W 0x3C2 /* Misc Output Write Register */
-#define IS1_R 0x3DA /* Input Status Register 1 */
-#define PEL_IW 0x3C8 /* PEL Write Index */
-#define PEL_IR 0x3C7 /* PEL Read Index */
-#define PEL_D 0x3C9 /* PEL Data Register */
-
-/* standard VGA indexes max counts */
-#define CRT_C 24 /* 24 CRT Controller Registers */
-#define ATT_C 21 /* 21 Attribute Controller Registers */
-#define GRA_C 9 /* 9 Graphics Controller Registers */
-#define SEQ_C 5 /* 5 Sequencer Registers */
-#define MIS_C 1 /* 1 Misc Output Register */
-#define PAL_C 768 /* 768 Palette Registers */
-#define FONT_C 8192 /* Total size of character generator RAM */
-
-/* VGA registers saving indexes */
-#define CRT 0 /* CRT Controller Registers start */
-#define ATT (CRT+CRT_C) /* Attribute Controller Registers start */
-#define GRA (ATT+ATT_C) /* Graphics Controller Registers start */
-#define SEQ (GRA+GRA_C) /* Sequencer Registers */
-#define MIS (SEQ+SEQ_C) /* General Registers */
-#define PAL (MIS+MIS_C) /* VGA Palette Registers */
-#define FONT (PAL+PAL_C) /* VGA font data */
-
-/* Macros for port I/O with arguments reversed */
-
-#define _port_out(v,p) PM_outpb(p,(uchar)(v))
-#define _port_in(p) PM_inpb(p)
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Returns the size of the VGA state buffer.
-****************************************************************************/
-int PMAPI PM_getVGAStateSize(void)
-{
- return CRT_C + ATT_C + GRA_C + SEQ_C + MIS_C + PAL_C + FONT_C;
-}
-
-/****************************************************************************
-REMARKS:
-Delay for a short period of time.
-****************************************************************************/
-static void vga_delay(void)
-{
- int i;
-
- /* For the loop here we program the POST register. The length of this
- * delay is dependant only on ISA bus speed, but it is enough for
- * what we need.
- */
- for (i = 0; i <= 10; i++)
- PM_outpb(0x80, 0);
-}
-
-/****************************************************************************
-PARAMETERS:
-port - I/O port to read value from
-index - Port index to read
-
-RETURNS:
-Byte read from 'port' register 'index'.
-****************************************************************************/
-static ushort vga_rdinx(
- ushort port,
- ushort index)
-{
- PM_outpb(port,(uchar)index);
- return PM_inpb(port+1);
-}
-
-/****************************************************************************
-PARAMETERS:
-port - I/O port to write to
-index - Port index to write
-value - Byte to write to port
-
-REMARKS:
-Writes a byte value to the 'port' register 'index'.
-****************************************************************************/
-static void vga_wrinx(
- ushort port,
- ushort index,
- ushort value)
-{
- PM_outpb(port,(uchar)index);
- PM_outpb(port+1,(uchar)value);
-}
-
-/****************************************************************************
-REMARKS:
-Save the color palette values
-****************************************************************************/
-static void vga_savepalette(
- uchar *pal)
-{
- int i;
-
- _port_out(0, PEL_IR);
- for (i = 0; i < 768; i++) {
- vga_delay();
- *pal++ = _port_in(PEL_D);
- }
-}
-
-/****************************************************************************
-REMARKS:
-Restore the color palette values
-****************************************************************************/
-static void vga_restorepalette(
- const uchar *pal)
-{
- int i;
-
- /* restore saved palette */
- _port_out(0, PEL_IW);
- for (i = 0; i < 768; i++) {
- vga_delay();
- _port_out(*pal++, PEL_D);
- }
-}
-
-/****************************************************************************
-REMARKS:
-Read the font data from the VGA character generator RAM
-****************************************************************************/
-static void vga_saveFont(
- uchar *data)
-{
- uchar *A0000Ptr = PM_getA0000Pointer();
- uchar save[7];
-
- /* Enable access to character generator RAM */
- save[0] = (uchar)vga_rdinx(SEQ_I,0x00);
- save[1] = (uchar)vga_rdinx(SEQ_I,0x02);
- save[2] = (uchar)vga_rdinx(SEQ_I,0x04);
- save[3] = (uchar)vga_rdinx(SEQ_I,0x00);
- save[4] = (uchar)vga_rdinx(GRA_I,0x04);
- save[5] = (uchar)vga_rdinx(GRA_I,0x05);
- save[6] = (uchar)vga_rdinx(GRA_I,0x06);
- vga_wrinx(SEQ_I,0x00,0x01);
- vga_wrinx(SEQ_I,0x02,0x04);
- vga_wrinx(SEQ_I,0x04,0x07);
- vga_wrinx(SEQ_I,0x00,0x03);
- vga_wrinx(GRA_I,0x04,0x02);
- vga_wrinx(GRA_I,0x05,0x00);
- vga_wrinx(GRA_I,0x06,0x00);
-
- /* Copy character generator RAM */
- memcpy(data,A0000Ptr,FONT_C);
-
- /* Restore VGA state */
- vga_wrinx(SEQ_I,0x00,save[0]);
- vga_wrinx(SEQ_I,0x02,save[1]);
- vga_wrinx(SEQ_I,0x04,save[2]);
- vga_wrinx(SEQ_I,0x00,save[3]);
- vga_wrinx(GRA_I,0x04,save[4]);
- vga_wrinx(GRA_I,0x05,save[5]);
- vga_wrinx(GRA_I,0x06,save[6]);
-}
-
-/****************************************************************************
-REMARKS:
-Downloads the font data to the VGA character generator RAM
-****************************************************************************/
-static void vga_restoreFont(
- const uchar *data)
-{
- uchar *A0000Ptr = PM_getA0000Pointer();
-
- /* Enable access to character generator RAM */
- vga_wrinx(SEQ_I,0x00,0x01);
- vga_wrinx(SEQ_I,0x02,0x04);
- vga_wrinx(SEQ_I,0x04,0x07);
- vga_wrinx(SEQ_I,0x00,0x03);
- vga_wrinx(GRA_I,0x04,0x02);
- vga_wrinx(GRA_I,0x05,0x00);
- vga_wrinx(GRA_I,0x06,0x00);
-
- /* Copy font back to character generator RAM */
- memcpy(A0000Ptr,data,FONT_C);
-}
-
-/****************************************************************************
-REMARKS:
-Save the state of all VGA compatible registers
-****************************************************************************/
-void PMAPI PM_saveVGAState(
- void *stateBuf)
-{
- uchar *regs = stateBuf;
- int i;
-
- /* Save state of VGA registers */
- for (i = 0; i < CRT_C; i++) {
- _port_out(i, CRT_I);
- regs[CRT + i] = _port_in(CRT_D);
- }
- for (i = 0; i < ATT_C; i++) {
- _port_in(IS1_R);
- vga_delay();
- _port_out(i, ATT_IW);
- vga_delay();
- regs[ATT + i] = _port_in(ATT_R);
- vga_delay();
- }
- for (i = 0; i < GRA_C; i++) {
- _port_out(i, GRA_I);
- regs[GRA + i] = _port_in(GRA_D);
- }
- for (i = 0; i < SEQ_C; i++) {
- _port_out(i, SEQ_I);
- regs[SEQ + i] = _port_in(SEQ_D);
- }
- regs[MIS] = _port_in(MIS_R);
-
- /* Save the VGA palette values */
- vga_savepalette(&regs[PAL]);
-
- /* Save the VGA character generator RAM */
- vga_saveFont(&regs[FONT]);
-
- /* Turn the VGA display back on */
- PM_vgaUnblankDisplay();
-}
-
-/****************************************************************************
-REMARKS:
-Retore the state of all VGA compatible registers
-****************************************************************************/
-void PMAPI PM_restoreVGAState(
- const void *stateBuf)
-{
- const uchar *regs = stateBuf;
- int i;
-
- /* Blank the display before we start the restore */
- PM_vgaBlankDisplay();
-
- /* Restore the VGA character generator RAM */
- vga_restoreFont(&regs[FONT]);
-
- /* Restore the VGA palette values */
- vga_restorepalette(&regs[PAL]);
-
- /* Restore the state of the VGA compatible registers */
- _port_out(regs[MIS], MIS_W);
-
- /* Delay to allow clock change to settle */
- for (i = 0; i < 10; i++)
- vga_delay();
-
- /* Synchronous reset on */
- _port_out(0x00,SEQ_I);
- _port_out(0x01,SEQ_D);
-
- /* Write seqeuencer registers */
- _port_out(1, SEQ_I);
- _port_out(regs[SEQ + 1] | 0x20, SEQ_D);
- for (i = 2; i < SEQ_C; i++) {
- _port_out(i, SEQ_I);
- _port_out(regs[SEQ + i], SEQ_D);
- }
-
- /* Synchronous reset off */
- _port_out(0x00,SEQ_I);
- _port_out(0x03,SEQ_D);
-
- /* Deprotect CRT registers 0-7 and write CRTC */
- _port_out(0x11, CRT_I);
- _port_out(_port_in(CRT_D) & 0x7F, CRT_D);
- for (i = 0; i < CRT_C; i++) {
- _port_out(i, CRT_I);
- _port_out(regs[CRT + i], CRT_D);
- }
- for (i = 0; i < GRA_C; i++) {
- _port_out(i, GRA_I);
- _port_out(regs[GRA + i], GRA_D);
- }
- for (i = 0; i < ATT_C; i++) {
- _port_in(IS1_R); /* reset flip-flop */
- vga_delay();
- _port_out(i, ATT_IW);
- vga_delay();
- _port_out(regs[ATT + i], ATT_IW);
- vga_delay();
- }
-
- /* Ensure the VGA screen is turned on */
- PM_vgaUnblankDisplay();
-}
-
-/****************************************************************************
-REMARKS:
-Disables the VGA display for screen output making it blank.
-****************************************************************************/
-void PMAPI PM_vgaBlankDisplay(void)
-{
- /* Turn screen off */
- _port_out(0x01, SEQ_I);
- _port_out(_port_in(SEQ_D) | 0x20, SEQ_D);
-
- /* Disable video output */
- _port_in(IS1_R);
- vga_delay();
- _port_out(0x00, ATT_IW);
-}
-
-/****************************************************************************
-REMARKS:
-Enables the VGA display for screen output.
-****************************************************************************/
-void PMAPI PM_vgaUnblankDisplay(void)
-{
- /* Turn screen back on */
- _port_out(0x01, SEQ_I);
- _port_out(_port_in(SEQ_D) & 0xDF, SEQ_D);
-
- /* Enable video output */
- _port_in(IS1_R);
- vga_delay();
- _port_out(0x20, ATT_IW);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/cpuinfo.c
deleted file mode 100644
index ac62e81c10..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/cpuinfo.c
+++ /dev/null
@@ -1,808 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Main module to implement the Zen Timer support functions.
-*
-****************************************************************************/
-
-#include "ztimer.h"
-#include "pmapi.h"
-#include "oshdr.h"
-#if !defined(__WIN32_VXD__) && !defined(__OS2_VDD__) && !defined(__NT_DRIVER__)
-#include <stdio.h>
-#include <string.h>
-#endif
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* External Intel assembler functions */
-#ifdef __INTEL__
-/* {secret} */
-ibool _ASMAPI _CPU_haveCPUID(void);
-/* {secret} */
-ibool _ASMAPI _CPU_check80386(void);
-/* {secret} */
-ibool _ASMAPI _CPU_check80486(void);
-/* {secret} */
-uint _ASMAPI _CPU_checkCPUID(void);
-/* {secret} */
-uint _ASMAPI _CPU_getCPUIDModel(void);
-/* {secret} */
-uint _ASMAPI _CPU_getCPUIDStepping(void);
-/* {secret} */
-uint _ASMAPI _CPU_getCPUIDFeatures(void);
-/* {secret} */
-uint _ASMAPI _CPU_getCacheSize(void);
-/* {secret} */
-uint _ASMAPI _CPU_have3DNow(void);
-/* {secret} */
-ibool _ASMAPI _CPU_checkClone(void);
-/* {secret} */
-void _ASMAPI _CPU_readTimeStamp(CPU_largeInteger *time);
-/* {secret} */
-void _ASMAPI _CPU_runBSFLoop(ulong iterations);
-/* {secret} */
-ulong _ASMAPI _CPU_mulDiv(ulong a,ulong b,ulong c);
-/* {secret} */
-void ZTimerQuickInit(void);
-#define CPU_HaveMMX 0x00800000
-#define CPU_HaveRDTSC 0x00000010
-#define CPU_HaveSSE 0x02000000
-#endif
-
-#if defined(__SMX32__)
-#include "smx/cpuinfo.c"
-#elif defined(__RTTARGET__)
-#include "rttarget/cpuinfo.c"
-#elif defined(__REALDOS__)
-#include "dos/cpuinfo.c"
-#elif defined(__NT_DRIVER__)
-#include "ntdrv/cpuinfo.c"
-#elif defined(__WIN32_VXD__)
-#include "vxd/cpuinfo.c"
-#elif defined(__WINDOWS32__)
-#include "win32/cpuinfo.c"
-#elif defined(__OS2_VDD__)
-#include "vdd/cpuinfo.c"
-#elif defined(__OS2__)
-#include "os2/cpuinfo.c"
-#elif defined(__LINUX__)
-#include "linux/cpuinfo.c"
-#elif defined(__QNX__)
-#include "qnx/cpuinfo.c"
-#elif defined(__BEOS__)
-#include "beos/cpuinfo.c"
-#else
-#error CPU library not ported to this platform yet!
-#endif
-
-/*------------------------ Public interface routines ----------------------*/
-
-/****************************************************************************
-REMARKS:
-Read an I/O port location.
-****************************************************************************/
-static uchar rdinx(
- int port,
- int index)
-{
- PM_outpb(port,(uchar)index);
- return PM_inpb(port+1);
-}
-
-/****************************************************************************
-REMARKS:
-Write an I/O port location.
-****************************************************************************/
-static void wrinx(
- ushort port,
- ushort index,
- ushort value)
-{
- PM_outpb(port,(uchar)index);
- PM_outpb(port+1,(uchar)value);
-}
-
-/****************************************************************************
-REMARKS:
-Enables the Cyrix CPUID instruction to properly detect MediaGX and 6x86
-processors.
-****************************************************************************/
-static void _CPU_enableCyrixCPUID(void)
-{
- uchar ccr3;
-
- PM_init();
- ccr3 = rdinx(0x22,0xC3);
- wrinx(0x22,0xC3,(uchar)(ccr3 | 0x10));
- wrinx(0x22,0xE8,(uchar)(rdinx(0x22,0xE8) | 0x80));
- wrinx(0x22,0xC3,ccr3);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns the type of processor in the system.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-Numerical identifier for the installed processor
-
-REMARKS:
-Returns the type of processor in the system. Note that if the CPU is an
-unknown Pentium family processor that we don't have an enumeration for,
-the return value will be greater than or equal to the value of CPU_UnkPentium
-(depending on the value returned by the CPUID instruction).
-
-SEE ALSO:
-CPU_getProcessorSpeed, CPU_haveMMX, CPU_getProcessorName
-****************************************************************************/
-uint ZAPI CPU_getProcessorType(void)
-{
-#if defined(__INTEL__)
- uint cpu,vendor,model,cacheSize;
- static ibool firstTime = true;
-
- if (_CPU_haveCPUID()) {
- cpu = _CPU_checkCPUID();
- vendor = cpu & ~CPU_mask;
- if (vendor == CPU_Intel) {
- /* Check for Intel processors */
- switch (cpu & CPU_mask) {
- case 4: cpu = CPU_i486; break;
- case 5: cpu = CPU_Pentium; break;
- case 6:
- if ((model = _CPU_getCPUIDModel()) == 1)
- cpu = CPU_PentiumPro;
- else if (model <= 6) {
- cacheSize = _CPU_getCacheSize();
- if ((model == 5 && cacheSize == 0) ||
- (model == 5 && cacheSize == 256) ||
- (model == 6 && cacheSize == 128))
- cpu = CPU_Celeron;
- else
- cpu = CPU_PentiumII;
- }
- else if (model >= 7) {
- /* Model 7 == Pentium III */
- /* Model 8 == Celeron/Pentium III Coppermine */
- cacheSize = _CPU_getCacheSize();
- if ((model == 8 && cacheSize == 128))
- cpu = CPU_Celeron;
- else
- cpu = CPU_PentiumIII;
- }
- break;
- default:
- cpu = CPU_UnkIntel;
- }
- }
- else if (vendor == CPU_Cyrix) {
- /* Check for Cyrix processors */
- switch (cpu & CPU_mask) {
- case 4:
- if ((model = _CPU_getCPUIDModel()) == 4)
- cpu = CPU_CyrixMediaGX;
- else
- cpu = CPU_UnkCyrix;
- break;
- case 5:
- if ((model = _CPU_getCPUIDModel()) == 2)
- cpu = CPU_Cyrix6x86;
- else if (model == 4)
- cpu = CPU_CyrixMediaGXm;
- else
- cpu = CPU_UnkCyrix;
- break;
- case 6:
- if ((model = _CPU_getCPUIDModel()) <= 1)
- cpu = CPU_Cyrix6x86MX;
- else
- cpu = CPU_UnkCyrix;
- break;
- default:
- cpu = CPU_UnkCyrix;
- }
- }
- else if (vendor == CPU_AMD) {
- /* Check for AMD processors */
- switch (cpu & CPU_mask) {
- case 4:
- if ((model = _CPU_getCPUIDModel()) == 0)
- cpu = CPU_AMDAm5x86;
- else
- cpu = CPU_AMDAm486;
- break;
- case 5:
- if ((model = _CPU_getCPUIDModel()) <= 3)
- cpu = CPU_AMDK5;
- else if (model <= 7)
- cpu = CPU_AMDK6;
- else if (model == 8)
- cpu = CPU_AMDK6_2;
- else if (model == 9)
- cpu = CPU_AMDK6_III;
- else if (model == 13) {
- if (_CPU_getCPUIDStepping() <= 3)
- cpu = CPU_AMDK6_IIIplus;
- else
- cpu = CPU_AMDK6_2plus;
- }
- else
- cpu = CPU_UnkAMD;
- break;
- case 6:
- if ((model = _CPU_getCPUIDModel()) == 3)
- cpu = CPU_AMDDuron;
- else
- cpu = CPU_AMDAthlon;
- break;
- default:
- cpu = CPU_UnkAMD;
- }
- }
- else if (vendor == CPU_IDT) {
- /* Check for IDT WinChip processors */
- switch (cpu & CPU_mask) {
- case 5:
- if ((model = _CPU_getCPUIDModel()) <= 4)
- cpu = CPU_WinChipC6;
- else if (model == 8)
- cpu = CPU_WinChip2;
- else
- cpu = CPU_UnkIDT;
- break;
- default:
- cpu = CPU_UnkIDT;
- }
- }
- else {
- /* Assume a Pentium compatible Intel clone */
- cpu = CPU_Pentium;
- }
- return cpu | vendor | (_CPU_getCPUIDStepping() << CPU_steppingShift);
- }
- else {
- if (_CPU_check80386())
- cpu = CPU_i386;
- else if (_CPU_check80486()) {
- /* If we get here we may have a Cyrix processor so we can try
- * enabling the CPUID instruction and trying again.
- */
- if (firstTime) {
- firstTime = false;
- _CPU_enableCyrixCPUID();
- return CPU_getProcessorType();
- }
- cpu = CPU_i486;
- }
- else
- cpu = CPU_Pentium;
- if (!_CPU_checkClone())
- return cpu | CPU_Intel;
- return cpu;
- }
-#elif defined(__ALPHA__)
- return CPU_Alpha;
-#elif defined(__MIPS__)
- return CPU_Mips;
-#elif defined(__PPC__)
- return CPU_PowerPC;
-#endif
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns true if the processor supports Intel MMX extensions.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-True if MMX is available, false if not.
-
-REMARKS:
-This function determines if the processor supports the Intel MMX extended
-instruction set.
-
-SEE ALSO:
-CPU_getProcessorType, CPU_getProcessorSpeed, CPU_have3DNow, CPU_haveSSE,
-CPU_getProcessorName
-****************************************************************************/
-ibool ZAPI CPU_haveMMX(void)
-{
-#ifdef __INTEL__
- if (_CPU_haveCPUID())
- return (_CPU_getCPUIDFeatures() & CPU_HaveMMX) != 0;
- return false;
-#else
- return false;
-#endif
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns true if the processor supports AMD 3DNow! extensions.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-True if 3DNow! is available, false if not.
-
-REMARKS:
-This function determines if the processor supports the AMD 3DNow! extended
-instruction set.
-
-SEE ALSO:
-CPU_getProcessorType, CPU_getProcessorSpeed, CPU_haveMMX, CPU_haveSSE,
-CPU_getProcessorName
-****************************************************************************/
-ibool ZAPI CPU_have3DNow(void)
-{
-#ifdef __INTEL__
- if (_CPU_haveCPUID())
- return _CPU_have3DNow();
- return false;
-#else
- return false;
-#endif
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns true if the processor supports Intel KNI extensions.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-True if Intel KNI is available, false if not.
-
-REMARKS:
-This function determines if the processor supports the Intel KNI extended
-instruction set.
-
-SEE ALSO:
-CPU_getProcessorType, CPU_getProcessorSpeed, CPU_haveMMX, CPU_have3DNow,
-CPU_getProcessorName
-****************************************************************************/
-ibool ZAPI CPU_haveSSE(void)
-{
-#ifdef __INTEL__
- if (_CPU_haveCPUID())
- return (_CPU_getCPUIDFeatures() & CPU_HaveSSE) != 0;
- return false;
-#else
- return false;
-#endif
-}
-
-/****************************************************************************
-RETURNS:
-True if the RTSC instruction is available, false if not.
-
-REMARKS:
-This function determines if the processor supports the Intel RDTSC
-instruction, for high precision timing. If the processor is not an Intel or
-Intel clone CPU, this function will always return false.
-
-DESCRIPTION:
-Returns true if the processor supports RDTSC extensions.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-True if RTSC is available, false if not.
-
-REMARKS:
-This function determines if the processor supports the RDTSC instruction
-for reading the processor time stamp counter.
-
-SEE ALSO:
-CPU_getProcessorType, CPU_getProcessorSpeed, CPU_haveMMX, CPU_have3DNow,
-CPU_getProcessorName
-****************************************************************************/
-ibool ZAPI CPU_haveRDTSC(void)
-{
-#ifdef __INTEL__
- if (_CPU_haveCPUID())
- return (_CPU_getCPUIDFeatures() & CPU_HaveRDTSC) != 0;
- return false;
-#else
- return false;
-#endif
-}
-
-#ifdef __INTEL__
-
-#define ITERATIONS 16000
-#define SAMPLINGS 2
-#define INNER_LOOPS 400
-
-/****************************************************************************
-REMARKS:
-If processor does not support time stamp reading, but is at least a 386 or
-above, utilize method of timing a loop of BSF instructions which take a
-known number of cycles to run on i386(tm), i486(tm), and Pentium(R)
-processors.
-****************************************************************************/
-static ulong GetBSFCpuSpeed(
- ulong cycles)
-{
- CPU_largeInteger t0,t1,count_freq;
- ulong ticks; /* Microseconds elapsed during test */
- ulong current; /* Variable to store time elapsed */
- int i,j,iPriority;
- ulong lowest = (ulong)-1;
-
- iPriority = SetMaxThreadPriority();
- GetCounterFrequency(&count_freq);
- for (i = 0; i < SAMPLINGS; i++) {
- GetCounter(&t0);
- for (j = 0; j < INNER_LOOPS; j++)
- _CPU_runBSFLoop(ITERATIONS);
- GetCounter(&t1);
- current = t1.low - t0.low;
- if (current < lowest)
- lowest = current;
- }
- RestoreThreadPriority(iPriority);
-
- /* Compute frequency */
- ticks = _CPU_mulDiv(lowest,1000000,count_freq.low);
- if ((ticks % count_freq.low) > (count_freq.low/2))
- ticks++; /* Round up if necessary */
- if (ticks == 0)
- return 0;
- return ((cycles*INNER_LOOPS)/ticks);
-}
-
-#define TOLERANCE 1
-
-/****************************************************************************
-REMARKS:
-On processors supporting the Read Time Stamp opcode, compare elapsed
-time on the High-Resolution Counter with elapsed cycles on the Time
-Stamp Register.
-
-The inner loop runs up to 20 times oruntil the average of the previous
-three calculated frequencies is within 1 MHz of each of the individual
-calculated frequencies. This resampling increases the accuracy of the
-results since outside factors could affect this calculation.
-****************************************************************************/
-static ulong GetRDTSCCpuSpeed(
- ibool accurate)
-{
- CPU_largeInteger t0,t1,s0,s1,count_freq;
- u64 stamp0, stamp1, ticks0, ticks1;
- u64 total_cycles, cycles, hz, freq;
- u64 total_ticks, ticks;
- int tries,iPriority;
- ulong maxCount;
-
- PM_set64_32(total_cycles,0);
- PM_set64_32(total_ticks,0);
- maxCount = accurate ? 600000 : 30000;
- iPriority = SetMaxThreadPriority();
- GetCounterFrequency(&count_freq);
- PM_set64(freq,count_freq.high,count_freq.low);
- for (tries = 0; tries < 3; tries++) {
- /* Loop until 100 ticks have passed since last read of hi-res
- * counter. This accounts for overhead later.
- */
- GetCounter(&t0);
- t1.low = t0.low;
- t1.high = t0.high;
- while ((t1.low - t0.low) < 100) {
- GetCounter(&t1);
- _CPU_readTimeStamp(&s0);
- }
-
- /* Loop until 30000 ticks have passed since last read of hi-res counter.
- * This allows for elapsed time for sampling. For a hi-res frequency
- * of 1MHz, this is about 0.03 of a second. The frequency reported
- * by the OS dependent code should be tuned to provide a good
- * sample period depending on the accuracy of the OS timers (ie:
- * if the accuracy is lower, lower the frequency to spend more time
- * in the inner loop to get better accuracy).
- */
- t0.low = t1.low;
- t0.high = t1.high;
- while ((t1.low - t0.low) < maxCount) {
- GetCounter(&t1);
- _CPU_readTimeStamp(&s1);
- }
-
- /* Find the difference during the timing loop */
- PM_set64(stamp0,s0.high,s0.low);
- PM_set64(stamp1,s1.high,s1.low);
- PM_set64(ticks0,t0.high,t0.low);
- PM_set64(ticks1,t1.high,t1.low);
- PM_sub64(cycles,stamp1,stamp0);
- PM_sub64(ticks,ticks1,ticks0);
-
- /* Sum up the results */
- PM_add64(total_ticks,total_ticks,ticks);
- PM_add64(total_cycles,total_cycles,cycles);
- }
- RestoreThreadPriority(iPriority);
-
- /* Compute frequency in Hz */
- PM_mul64(hz,total_cycles,freq);
- PM_div64(hz,hz,total_ticks);
- return PM_64to32(hz);
-}
-
-#endif /* __INTEL__ */
-
-/****************************************************************************
-DESCRIPTION:
-Returns the speed of the processor in MHz.
-
-HEADER:
-ztimer.h
-
-PARAMETERS:
-accurate - True of the speed should be measured accurately
-
-RETURNS:
-Processor speed in MHz.
-
-REMARKS:
-This function returns the speed of the CPU in MHz. Note that if the speed
-cannot be determined, this function will return 0.
-
-If the accurate parameter is set to true, this function will spend longer
-profiling the speed of the CPU, and will not round the CPU speed that is
-reported. This is important for highly accurate timing using the Pentium
-RDTSC instruction, but it does take a lot longer for the profiling to
-produce accurate results.
-
-SEE ALSO:
-CPU_getProcessorSpeedInHz, CPU_getProcessorType, CPU_haveMMX,
-CPU_getProcessorName
-****************************************************************************/
-ulong ZAPI CPU_getProcessorSpeed(
- ibool accurate)
-{
-#if defined(__INTEL__)
- /* Number of cycles needed to execute a single BSF instruction on i386+
- * processors.
- */
- ulong cpuSpeed;
- uint i;
- static ulong intel_cycles[] = {
- 115,47,43,
- };
- static ulong cyrix_cycles[] = {
- 38,38,52,52,
- };
- static ulong amd_cycles[] = {
- 49,
- };
- static ulong known_speeds[] = {
- 1000,950,900,850,800,750,700,650,600,550,500,450,433,400,350,
- 333,300,266,233,200,166,150,133,120,100,90,75,66,60,50,33,20,0,
- };
-
- if (CPU_haveRDTSC()) {
- cpuSpeed = (GetRDTSCCpuSpeed(accurate) + 500000) / 1000000;
- }
- else {
- int type = CPU_getProcessorType();
- int processor = type & CPU_mask;
- int vendor = type & CPU_familyMask;
- if (vendor == CPU_Intel)
- cpuSpeed = GetBSFCpuSpeed(ITERATIONS * intel_cycles[processor - CPU_i386]);
- else if (vendor == CPU_Cyrix)
- cpuSpeed = GetBSFCpuSpeed(ITERATIONS * cyrix_cycles[processor - CPU_Cyrix6x86]);
- else if (vendor == CPU_AMD)
- cpuSpeed = GetBSFCpuSpeed(ITERATIONS * amd_cycles[0]);
- else
- return 0;
- }
-
- /* Now normalise the results given known processors speeds, if the
- * speed we measure is within 2MHz of the expected values
- */
- if (!accurate) {
- for (i = 0; known_speeds[i] != 0; i++) {
- if (cpuSpeed >= (known_speeds[i]-3) && cpuSpeed <= (known_speeds[i]+3)) {
- return known_speeds[i];
- }
- }
- }
- return cpuSpeed;
-#else
- return 0;
-#endif
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns the speed of the processor in Hz.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-Accurate processor speed in Hz.
-
-REMARKS:
-This function returns the accurate speed of the CPU in Hz. Note that if the
-speed cannot be determined, this function will return 0.
-
-This function is similar to the CPU_getProcessorSpeed function, except that
-it attempts to accurately measure the CPU speed in Hz. This is used
-internally in the Zen Timer libraries to provide accurate real world timing
-information. This is important for highly accurate timing using the Pentium
-RDTSC instruction, but it does take a lot longer for the profiling to
-produce accurate results.
-
-SEE ALSO:
-CPU_getProcessorSpeed, CPU_getProcessorType, CPU_haveMMX,
-CPU_getProcessorName
-****************************************************************************/
-ulong ZAPI CPU_getProcessorSpeedInHZ(
- ibool accurate)
-{
-#if defined(__INTEL__)
- if (CPU_haveRDTSC()) {
- return GetRDTSCCpuSpeed(accurate);
- }
- return CPU_getProcessorSpeed(false) * 1000000;
-#else
- return 0;
-#endif
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns a string defining the speed and name of the processor.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-Processor name string.
-
-REMARKS:
-This function returns an English string describing the speed and name of the
-CPU.
-
-SEE ALSO:
-CPU_getProcessorType, CPU_haveMMX, CPU_getProcessorName
-****************************************************************************/
-char * ZAPI CPU_getProcessorName(void)
-{
-#if defined(__INTEL__)
- static int cpu,speed = -1;
- static char name[80];
-
- if (speed == -1) {
- cpu = CPU_getProcessorType();
- speed = CPU_getProcessorSpeed(false);
- }
- sprintf(name,"%d MHz ", speed);
- switch (cpu & CPU_mask) {
- case CPU_i386:
- strcat(name,"Intel i386 processor");
- break;
- case CPU_i486:
- strcat(name,"Intel i486 processor");
- break;
- case CPU_Pentium:
- strcat(name,"Intel Pentium processor");
- break;
- case CPU_PentiumPro:
- strcat(name,"Intel Pentium Pro processor");
- break;
- case CPU_PentiumII:
- strcat(name,"Intel Pentium II processor");
- break;
- case CPU_Celeron:
- strcat(name,"Intel Celeron processor");
- break;
- case CPU_PentiumIII:
- strcat(name,"Intel Pentium III processor");
- break;
- case CPU_UnkIntel:
- strcat(name,"Unknown Intel processor");
- break;
- case CPU_Cyrix6x86:
- strcat(name,"Cyrix 6x86 processor");
- break;
- case CPU_Cyrix6x86MX:
- strcat(name,"Cyrix 6x86MX processor");
- break;
- case CPU_CyrixMediaGX:
- strcat(name,"Cyrix MediaGX processor");
- break;
- case CPU_CyrixMediaGXm:
- strcat(name,"Cyrix MediaGXm processor");
- break;
- case CPU_UnkCyrix:
- strcat(name,"Unknown Cyrix processor");
- break;
- case CPU_AMDAm486:
- strcat(name,"AMD Am486 processor");
- break;
- case CPU_AMDAm5x86:
- strcat(name,"AMD Am5x86 processor");
- break;
- case CPU_AMDK5:
- strcat(name,"AMD K5 processor");
- break;
- case CPU_AMDK6:
- strcat(name,"AMD K6 processor");
- break;
- case CPU_AMDK6_2:
- strcat(name,"AMD K6-2 processor");
- break;
- case CPU_AMDK6_III:
- strcat(name,"AMD K6-III processor");
- break;
- case CPU_AMDK6_2plus:
- strcat(name,"AMD K6-2+ processor");
- break;
- case CPU_AMDK6_IIIplus:
- strcat(name,"AMD K6-III+ processor");
- break;
- case CPU_UnkAMD:
- strcat(name,"Unknown AMD processor");
- break;
- case CPU_AMDAthlon:
- strcat(name,"AMD Athlon processor");
- break;
- case CPU_AMDDuron:
- strcat(name,"AMD Duron processor");
- break;
- case CPU_WinChipC6:
- strcat(name,"IDT WinChip C6 processor");
- break;
- case CPU_WinChip2:
- strcat(name,"IDT WinChip 2 processor");
- break;
- case CPU_UnkIDT:
- strcat(name,"Unknown IDT processor");
- break;
- default:
- strcat(name,"Unknown processor");
- }
- if (CPU_haveMMX())
- strcat(name," with MMX(R)");
- if (CPU_have3DNow())
- strcat(name,", 3DNow!(R)");
- if (CPU_haveSSE())
- strcat(name,", SSE(R)");
- return name;
-#else
- return "Unknown";
-#endif
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/debug.c b/board/MAI/bios_emulator/scitech/src/pm/debug.c
deleted file mode 100644
index 751bf098fc..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/debug.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Main module containing debug checking features.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#ifdef __WIN32_VXD__
-#include "vxdfile.h"
-#elif defined(__NT_DRIVER__)
-#include "ntdriver.h"
-#elif defined(__OS2_VDD__)
-#include "vddfile.h"
-#else
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#endif
-
-/*---------------------------- Global variables ---------------------------*/
-
-/* {secret} */
-void (*_CHK_fail)(int fatal,const char *msg,const char *cond,const char *file,int line) = _CHK_defaultFail;
-static char logFile[256] = "";
-
-/*----------------------------- Implementation ----------------------------*/
-
-#ifdef CHECKED
-void _CHK_defaultFail(
- int fatal,
- const char *msg,
- const char *cond,
- const char *file,
- int line)
-{
- FILE *f;
- char buf[256];
-
- if (logFile[0] == 0) {
- strcpy(logFile,PM_getNucleusPath());
- PM_backslash(logFile);
- strcat(logFile,"scitech.log");
- }
- if ((f = fopen(logFile,"a+")) != NULL) {
-#if defined(__WIN32_VXD__) || defined(__OS2_VDD__) || defined(__NT_DRIVER__)
- sprintf(buf,msg,cond,file,line);
- fwrite(buf,1,strlen(buf),f);
-#else
- fprintf(f,msg,cond,file,line);
-#endif
- fclose(f);
- }
- if (fatal) {
- sprintf(buf,"Check failed: check '%s' for details", logFile);
- PM_fatalError(buf);
- }
-}
-#endif
-
-/****************************************************************************
-DESCRIPTION:
-Sets the location of the debug log file.
-
-HEADER:
-pmapi.h
-
-PARAMETERS:
-logFilePath - Full file and path name to debug log file.
-
-REMARKS:
-Sets the name and location of the debug log file. The debug log file is
-created and written to when runtime checks, warnings and failure conditions
-are logged to disk when code is compiled in CHECKED mode. By default the
-log file is called 'scitech.log' and goes into the current SciTech Nucleus
-path for the application. You can use this function to set the filename
-and location of the debug log file to your own application specific
-directory.
-****************************************************************************/
-void PMAPI PM_setDebugLog(
- const char *logFilePath)
-{
- strcpy(logFile,logFilePath);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/_event.asm b/board/MAI/bios_emulator/scitech/src/pm/dos/_event.asm
deleted file mode 100644
index 36dcaab67b..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/_event.asm
+++ /dev/null
@@ -1,194 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech Multi-platform Graphics Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Language: 80386 Assembler
-;* Environment: IBM PC (MS DOS)
-;*
-;* Description: Assembly language support routines for the event module.
-;*
-;****************************************************************************
-
- ideal
-
-include "scitech.mac" ; Memory model macros
-
-ifdef flatmodel
-
-header _event ; Set up memory model
-
-begdataseg _event
-
- cextern _EVT_biosPtr,DPTR
-
-ifdef USE_NASM
-%define KB_HEAD WORD esi+01Ah ; Keyboard buffer head in BIOS data area
-%define KB_TAIL WORD esi+01Ch ; Keyboard buffer tail in BIOS data area
-%define KB_START WORD esi+080h ; Start of keyboard buffer in BIOS data area
-%define KB_END WORD esi+082h ; End of keyboard buffer in BIOS data area
-else
-KB_HEAD EQU WORD esi+01Ah ; Keyboard buffer head in BIOS data area
-KB_TAIL EQU WORD esi+01Ch ; Keyboard buffer tail in BIOS data area
-KB_START EQU WORD esi+080h ; Start of keyboard buffer in BIOS data area
-KB_END EQU WORD esi+082h ; End of keyboard buffer in BIOS data area
-endif
-
-enddataseg _event
-
-begcodeseg _event ; Start of code segment
-
- cpublic _EVT_codeStart
-
-;----------------------------------------------------------------------------
-; int _EVT_getKeyCode(void)
-;----------------------------------------------------------------------------
-; Returns the key code for the next available key by extracting it from
-; the BIOS keyboard buffer.
-;----------------------------------------------------------------------------
-cprocstart _EVT_getKeyCode
-
- enter_c
-
- mov esi,[_EVT_biosPtr]
- xor ebx,ebx
- xor eax,eax
- mov bx,[KB_HEAD]
- cmp bx,[KB_TAIL]
- jz @@Done
- xor eax,eax
- mov ax,[esi+ebx] ; EAX := character from keyboard buffer
- inc _bx
- inc _bx
- cmp bx,[KB_END] ; Hit the end of the keyboard buffer?
- jl @@1
- mov bx,[KB_START]
-@@1: mov [KB_HEAD],bx ; Update keyboard buffer head pointer
-
-@@Done: leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _EVT_pumpMessages(void)
-;----------------------------------------------------------------------------
-; This function would normally do nothing, however due to strange bugs
-; in the Windows 3.1 and OS/2 DOS boxes, we don't get any hardware keyboard
-; interrupts unless we periodically call the BIOS keyboard functions. Hence
-; this function gets called every time that we check for events, and works
-; around this problem (in essence it tells the DOS VDM to pump the
-; keyboard events to our program ;-).
-;
-; Note that this bug is not present under Win 9x DOS boxes.
-;----------------------------------------------------------------------------
-cprocstart _EVT_pumpMessages
-
- mov ah,11h ; Function - Check keyboard status
- int 16h ; Call BIOS
-
- mov ax, 0Bh ; Reset Move Mouse
- int 33h
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int _EVT_disableInt(void);
-;----------------------------------------------------------------------------
-; Return processor interrupt status and disable interrupts.
-;----------------------------------------------------------------------------
-cprocstart _EVT_disableInt
-
- pushf ; Put flag word on stack
- cli ; Disable interrupts!
- pop eax ; deposit flag word in return register
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _EVT_restoreInt(int ps);
-;----------------------------------------------------------------------------
-; Restore processor interrupt status.
-;----------------------------------------------------------------------------
-cprocstart _EVT_restoreInt
-
- ARG ps:UINT
-
- push ebp
- mov ebp,esp ; Set up stack frame
- push [DWORD ps]
- popf ; Restore processor status (and interrupts)
- pop ebp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int EVT_rdinx(int port,int index)
-;----------------------------------------------------------------------------
-; Reads an indexed register value from an I/O port.
-;----------------------------------------------------------------------------
-cprocstart EVT_rdinx
-
- ARG port:UINT, index:UINT
-
- push ebp
- mov ebp,esp
- mov edx,[port]
- mov al,[BYTE index]
- out dx,al
- inc dx
- in al,dx
- movzx eax,al
- pop ebp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void EVT_wrinx(int port,int index,int value)
-;----------------------------------------------------------------------------
-; Writes an indexed register value to an I/O port.
-;----------------------------------------------------------------------------
-cprocstart EVT_wrinx
-
- ARG port:UINT, index:UINT, value:UINT
-
- push ebp
- mov ebp,esp
- mov edx,[port]
- mov al,[BYTE index]
- mov ah,[BYTE value]
- out dx,ax
- pop ebp
- ret
-
-cprocend
-
- cpublic _EVT_codeEnd
-
-endcodeseg _event
-
-endif
-
- END ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/_lztimer.asm b/board/MAI/bios_emulator/scitech/src/pm/dos/_lztimer.asm
deleted file mode 100644
index a4a9c7916e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/_lztimer.asm
+++ /dev/null
@@ -1,438 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Language: NASM or TASM Assembler
-;* Environment: IBM PC (MS DOS)
-;*
-;* Description: Uses the 8253 timer and the BIOS time-of-day count to time
-;* the performance of code that takes less than an hour to
-;* execute.
-;*
-;* The routines in this package only works with interrupts
-;* enabled, and in fact will explicitly turn interrupts on
-;* in order to ensure we get accurate results from the timer.
-;*
-;* Externally 'C' callable routines:
-;*
-;* LZ_timerOn: Saves the BIOS time of day count and starts the
-;* long period Zen Timer.
-;*
-;* LZ_timerLap: Latches the current count, and keeps the timer running
-;*
-;* LZ_timerOff: Stops the long-period Zen Timer and saves the timer
-;* count and the BIOS time of day count.
-;*
-;* LZ_timerCount: Returns an unsigned long representing the timed count
-;* in microseconds. If more than an hour passed during
-;* the timing interval, LZ_timerCount will return the
-;* value 0xFFFFFFFF (an invalid count).
-;*
-;* Note: If either more than an hour passes between calls to LZ_timerOn
-;* and LZ_timerOff, an error is reported. For timing code that takes
-;* more than a few minutes to execute, use the low resolution
-;* Ultra Long Period Zen Timer code, which should be accurate
-;* enough for most purposes.
-;*
-;* Note: Each block of code being timed should ideally be run several
-;* times, with at least two similar readings required to
-;* establish a true measurement, in order to eliminate any
-;* variability caused by interrupts.
-;*
-;* Note: Interrupts must not be disabled for more than 54 ms at a
-;* stretch during the timing interval. Because interrupts are
-;* enabled, key, mice, and other devices that generate interrupts
-;* should not be used during the timing interval.
-;*
-;* Note: Any extra code running off the timer interrupt (such as
-;* some memory resident utilities) will increase the time
-;* measured by the Zen Timer.
-;*
-;* Note: These routines can introduce inaccuracies of up to a few
-;* tenths of a second into the system clock count for each
-;* code section being timed. Consequently, it's a good idea to
-;* reboot at the conclusion of timing sessions. (The
-;* battery-backed clock, if any, is not affected by the Zen
-;* timer.)
-;*
-;* All registers and all flags are preserved by all routines, except
-;* interrupts which are always turned on
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac"
-
-;****************************************************************************
-;
-; Equates used by long period Zen Timer
-;
-;****************************************************************************
-
-; Base address of 8253 timer chip
-
-BASE_8253 equ 40h
-
-; The address of the timer 0 count registers in the 8253
-
-TIMER_0_8253 equ BASE_8253 + 0
-
-; The address of the mode register in the 8253
-
-MODE_8253 equ BASE_8253 + 3
-
-; The address of the BIOS timer count variable in the BIOS data area.
-
-TIMER_COUNT equ 6Ch
-
-; Macro to delay briefly to ensure that enough time has elapsed between
-; successive I/O accesses so that the device being accessed can respond
-; to both accesses even on a very fast PC.
-
-ifdef USE_NASM
-%macro DELAY 0
- jmp short $+2
- jmp short $+2
- jmp short $+2
-%endmacro
-else
-macro DELAY
- jmp short $+2
- jmp short $+2
- jmp short $+2
-endm
-endif
-
-header _lztimer
-
-begdataseg _lztimer
-
- cextern _ZTimerBIOSPtr,DPTR
-
-StartBIOSCount dd 0 ; Starting BIOS count dword
-EndBIOSCount dd 0 ; Ending BIOS count dword
-EndTimedCount dw 0 ; Timer 0 count at the end of timing period
-
-enddataseg _lztimer
-
-begcodeseg _lztimer ; Start of code segment
-
-;----------------------------------------------------------------------------
-; void LZ_timerOn(void);
-;----------------------------------------------------------------------------
-; Starts the Long period Zen timer counting.
-;----------------------------------------------------------------------------
-cprocstart LZ_timerOn
-
-; Set the timer 0 of the 8253 to mode 2 (divide-by-N), to cause
-; linear counting rather than count-by-two counting. Also stops
-; timer 0 until the timer count is loaded, except on PS/2 computers.
-
- mov al,00110100b ; mode 2
- out MODE_8253,al
-
-; Set the timer count to 0, so we know we won't get another timer
-; interrupt right away. Note: this introduces an inaccuracy of up to 54 ms
-; in the system clock count each time it is executed.
-
- DELAY
- sub al,al
- out TIMER_0_8253,al ; lsb
- DELAY
- out TIMER_0_8253,al ; msb
-
-; Store the timing start BIOS count
-
- use_es
-ifdef flatmodel
- mov ebx,[_ZTimerBIOSPtr]
-else
- les bx,[_ZTimerBIOSPtr]
-endif
- cli ; No interrupts while we grab the count
- mov eax,[_ES _bx+TIMER_COUNT]
- sti
- mov [StartBIOSCount],eax
- unuse_es
-
-; Set the timer count to 0 again to start the timing interval.
-
- mov al,00110100b ; set up to load initial
- out MODE_8253,al ; timer count
- DELAY
- sub al,al
- out TIMER_0_8253,al ; load count lsb
- DELAY
- out TIMER_0_8253,al ; load count msb
-
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void LZ_timerOff(void);
-;----------------------------------------------------------------------------
-; Stops the long period Zen timer and saves count.
-;----------------------------------------------------------------------------
-cprocstart LZ_timerOff
-
-; Latch the timer count.
-
- mov al,00000000b ; latch timer 0
- out MODE_8253,al
- cli ; Stop the BIOS count
-
-; Read the BIOS count. (Since interrupts are disabled, the BIOS
-; count won't change).
-
- use_es
-ifdef flatmodel
- mov ebx,[_ZTimerBIOSPtr]
-else
- les bx,[_ZTimerBIOSPtr]
-endif
- mov eax,[_ES _bx+TIMER_COUNT]
- mov [EndBIOSCount],eax
- unuse_es
-
-; Read out the count we latched earlier.
-
- in al,TIMER_0_8253 ; least significant byte
- DELAY
- mov ah,al
- in al,TIMER_0_8253 ; most significant byte
- xchg ah,al
- neg ax ; Convert from countdown remaining
- ; to elapsed count
- mov [EndTimedCount],ax
- sti ; Let the BIOS count continue
-
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; unsigned long LZ_timerLap(void)
-;----------------------------------------------------------------------------
-; Latches the current count and converts it to a microsecond timing value,
-; but leaves the timer still running. We dont check for and overflow,
-; where the time has gone over an hour in this routine, since we want it
-; to execute as fast as possible.
-;----------------------------------------------------------------------------
-cprocstart LZ_timerLap
-
- push ebx ; Save EBX for 32 bit code
-
-; Latch the timer count.
-
- mov al,00000000b ; latch timer 0
- out MODE_8253,al
- cli ; Stop the BIOS count
-
-; Read the BIOS count. (Since interrupts are disabled, the BIOS
-; count wont change).
-
- use_es
-ifdef flatmodel
- mov ebx,[_ZTimerBIOSPtr]
-else
- les bx,[_ZTimerBIOSPtr]
-endif
- mov eax,[_ES _bx+TIMER_COUNT]
- mov [EndBIOSCount],eax
- unuse_es
-
-; Read out the count we latched earlier.
-
- in al,TIMER_0_8253 ; least significant byte
- DELAY
- mov ah,al
- in al,TIMER_0_8253 ; most significant byte
- xchg ah,al
- neg ax ; Convert from countdown remaining
- ; to elapsed count
- mov [EndTimedCount],ax
- sti ; Let the BIOS count continue
-
-; See if a midnight boundary has passed and adjust the finishing BIOS
-; count by the number of ticks in 24 hours. We wont be able to detect
-; more than 24 hours, but at least we can time across a midnight
-; boundary
-
- mov eax,[EndBIOSCount] ; Is end < start?
- cmp eax,[StartBIOSCount]
- jae @@CalcBIOSTime ; No, calculate the time taken
-
-; Adjust the finishing time by adding the number of ticks in 24 hours
-; (1573040).
-
- add [DWORD EndBIOSCount],1800B0h
-
-; Convert the BIOS time to microseconds
-
-@@CalcBIOSTime:
- mov ax,[WORD EndBIOSCount]
- sub ax,[WORD StartBIOSCount]
- mov dx,54925 ; Number of microseconds each
- ; BIOS count represents.
- mul dx
- mov bx,ax ; set aside BIOS count in
- mov cx,dx ; microseconds
-
-; Convert timer count to microseconds
-
- push _si
- mov ax,[EndTimedCount]
- mov si,8381
- mul si
- mov si,10000
- div si ; * 0.8381 = * 8381 / 10000
- pop _si
-
-; Add the timer and BIOS counts together to get an overall time in
-; microseconds.
-
- add ax,bx
- adc cx,0
-ifdef flatmodel
- shl ecx,16
- mov cx,ax
- mov eax,ecx ; EAX := timer count
-else
- mov dx,cx
-endif
- pop ebx ; Restore EBX for 32 bit code
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; unsigned long LZ_timerCount(void);
-;----------------------------------------------------------------------------
-; Returns an unsigned long representing the net time in microseconds.
-;
-; If an hour has passed while timing, we return 0xFFFFFFFF as the count
-; (which is not a possible count in itself).
-;----------------------------------------------------------------------------
-cprocstart LZ_timerCount
-
- push ebx ; Save EBX for 32 bit code
-
-; See if a midnight boundary has passed and adjust the finishing BIOS
-; count by the number of ticks in 24 hours. We wont be able to detect
-; more than 24 hours, but at least we can time across a midnight
-; boundary
-
- mov eax,[EndBIOSCount] ; Is end < start?
- cmp eax,[StartBIOSCount]
- jae @@CheckForHour ; No, check for hour passing
-
-; Adjust the finishing time by adding the number of ticks in 24 hours
-; (1573040).
-
- add [DWORD EndBIOSCount],1800B0h
-
-; See if more than an hour passed during timing. If so, notify the user.
-
-@@CheckForHour:
- mov ax,[WORD StartBIOSCount+2]
- cmp ax,[WORD EndBIOSCount+2]
- jz @@CalcBIOSTime ; Hour count didn't change, so
- ; everything is fine
-
- inc ax
- cmp ax,[WORD EndBIOSCount+2]
- jnz @@TestTooLong ; Two hour boundaries passed, so the
- ; results are no good
- mov ax,[WORD EndBIOSCount]
- cmp ax,[WORD StartBIOSCount]
- jb @@CalcBIOSTime ; a single hour boundary passed. That's
- ; OK, so long as the total time wasn't
- ; more than an hour.
-
-; Over an hour elapsed passed during timing, which renders
-; the results invalid. Notify the user. This misses the case where a
-; multiple of 24 hours has passed, but we'll rely on the perspicacity of
-; the user to detect that case :-).
-
-@@TestTooLong:
-ifdef flatmodel
- mov eax,0FFFFFFFFh
-else
- mov ax,0FFFFh
- mov dx,0FFFFh
-endif
- jmp short @@Done
-
-; Convert the BIOS time to microseconds
-
-@@CalcBIOSTime:
- mov ax,[WORD EndBIOSCount]
- sub ax,[WORD StartBIOSCount]
- mov dx,54925 ; Number of microseconds each
- ; BIOS count represents.
- mul dx
- mov bx,ax ; set aside BIOS count in
- mov cx,dx ; microseconds
-
-; Convert timer count to microseconds
-
- push _si
- mov ax,[EndTimedCount]
- mov si,8381
- mul si
- mov si,10000
- div si ; * 0.8381 = * 8381 / 10000
- pop _si
-
-; Add the timer and BIOS counts together to get an overall time in
-; microseconds.
-
- add ax,bx
- adc cx,0
-ifdef flatmodel
- shl ecx,16
- mov cx,ax
- mov eax,ecx ; EAX := timer count
-else
- mov dx,cx
-endif
-
-@@Done: pop ebx ; Restore EBX for 32 bit code
- ret
-
-cprocend
-
-cprocstart LZ_disable
- cli
- ret
-cprocend
-
-cprocstart LZ_enable
- sti
- ret
-cprocend
-
-endcodeseg _lztimer
-
- END
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/_pm.asm b/board/MAI/bios_emulator/scitech/src/pm/dos/_pm.asm
deleted file mode 100644
index 42b5cf3692..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/_pm.asm
+++ /dev/null
@@ -1,656 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Language: 80386 Assembler, TASM 4.0 or NASM
-;* Environment: IBM PC Real mode and 16/32 bit protected mode
-;*
-;* Description: Low level assembly support for the PM library specific to
-;* MSDOS.
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac" ; Memory model macros
-
-header _pmdos ; Set up memory model
-
-begdataseg _pmdos
-
-ifndef flatmodel
-
-struc rmregs_s
-ax dw ?
-ax_high dw ?
-bx dw ?
-bx_high dw ?
-cx dw ?
-cx_high dw ?
-dx dw ?
-dx_high dw ?
-si dw ?
-si_high dw ?
-di dw ?
-di_high dw ?
-cflag dw ?
-cflag_high dw ?
-ends rmregs_s
-RMREGS = (rmregs_s PTR es:bx)
-
-struc rmsregs_s
-es dw ?
-cs dw ?
-ss dw ?
-ds dw ?
-ends rmsregs_s
-RMSREGS = (rmsregs_s PTR es:bx)
-
-endif ; !flatmodel
-
-ifdef flatmodel
- cextern _PM_savedDS,USHORT
- cextern _PM_VXD_off,UINT
- cextern _PM_VXD_sel,UINT
-ifdef DOS4GW
- cextern _PM_haveCauseWay,UINT
-endif
-endif
-intel_id db "GenuineIntel" ; Intel vendor ID
-
-PMHELP_GETPDB EQU 0026h
-PMHELP_FLUSHTLB EQU 0027h
-
-enddataseg _pmdos
-
-P586
-
-begcodeseg _pmdos ; Start of code segment
-
-ifndef flatmodel
-
-;----------------------------------------------------------------------------
-; void PM_callRealMode(unsigned s,unsigned o, RMREGS *regs,
-; RMSREGS *sregs)
-;----------------------------------------------------------------------------
-; Calls a real mode procedure, loading the appropriate registers values
-; from the passed in structures. Only the DS and ES register are loaded
-; from the SREGS structure.
-;----------------------------------------------------------------------------
-cprocstart PM_callRealMode
-
- ARG s:WORD, o:WORD, regs:DWORD, sregs:DWORD
-
- LOCAL addr:DWORD, bxVal:WORD, esVal:WORD, flags:WORD = LocalSize
-
- enter_c
- push ds
- push es
-
- mov ax,[o] ; Build the address to call in 'addr'
- mov [WORD addr],ax
- mov ax,[s]
- mov [WORD addr+2],ax
-
- les bx,[sregs]
- mov ax,[RMSREGS.ds]
- mov ds,ax ; DS := passed in value
- mov ax,[RMSREGS.es]
- mov [esVal],ax
- les bx,[regs]
- mov ax,[RMREGS.bx]
- mov [bxVal],ax
- mov ax,[RMREGS.ax] ; AX := passed in value
- mov cx,[RMREGS.cx] ; CX := passed in value
- mov dx,[RMREGS.dx] ; DX := passed in value
- mov si,[RMREGS.si] ; SI := passed in value
- mov di,[RMREGS.di] ; DI := passed in value
- push bp
- push [esVal]
- pop es ; ES := passed in value
- mov bx,[bxVal] ; BX := passed in value
-
- call [addr] ; Call the specified routine
-
- pushf ; Save flags for later
- pop [flags]
-
- pop bp
- push es
- pop [esVal]
- push bx
- pop [bxVal]
- les bx,[sregs]
- push ds
- pop [RMSREGS.ds] ; Save value of DS
- push [esVal]
- pop [RMSREGS.es] ; Save value of ES
- les bx,[regs]
- mov [RMREGS.ax],ax ; Save value of AX
- mov [RMREGS.cx],cx ; Save value of CX
- mov [RMREGS.dx],dx ; Save value of DX
- mov [RMREGS.si],si ; Save value of SI
- mov [RMREGS.di],di ; Save value of DI
- mov ax,[flags] ; Return flags
- and ax,1h ; Isolate carry flag
- mov [RMREGS.cflag],ax ; Save carry flag status
- mov ax,[bxVal]
- mov [RMREGS.bx],ax ; Save value of BX
-
- pop es
- pop ds
- leave_c
- ret
-
-cprocend
-
-endif
-
-;----------------------------------------------------------------------------
-; void PM_segread(PMSREGS *sregs)
-;----------------------------------------------------------------------------
-; Read the current value of all segment registers
-;----------------------------------------------------------------------------
-cprocstartdll16 PM_segread
-
- ARG sregs:DPTR
-
- enter_c
-
- mov ax,es
- _les _si,[sregs]
- mov [_ES _si],ax
- mov [_ES _si+2],cs
- mov [_ES _si+4],ss
- mov [_ES _si+6],ds
- mov [_ES _si+8],fs
- mov [_ES _si+10],gs
-
- leave_c
- ret
-
-cprocend
-
-; Create a table of the 256 different interrupt calls that we can jump
-; into
-
-ifdef USE_NASM
-
-%assign intno 0
-
-intTable:
-%rep 256
- db 0CDh
- db intno
-%assign intno intno + 1
- ret
- nop
-%endrep
-
-else
-
-intno = 0
-
-intTable:
- REPT 256
- db 0CDh
- db intno
-intno = intno + 1
- ret
- nop
- ENDM
-
-endif
-
-;----------------------------------------------------------------------------
-; _PM_genInt - Generate the appropriate interrupt
-;----------------------------------------------------------------------------
-cprocnear _PM_genInt
-
- push _ax ; Save _ax
- push _bx ; Save _bx
-ifdef flatmodel
- mov ebx,[UINT esp+12] ; EBX := interrupt number
-else
- mov bx,sp ; Make sure ESP is zeroed
- mov bx,[UINT ss:bx+6] ; BX := interrupt number
-endif
- mov _ax,offset intTable ; Point to interrupt generation table
- shl _bx,2 ; _BX := index into table
- add _ax,_bx ; _AX := pointer to interrupt code
-ifdef flatmodel
- xchg eax,[esp+4] ; Restore eax, and set for int
-else
- mov bx,sp
- xchg ax,[ss:bx+2] ; Restore ax, and set for int
-endif
- pop _bx ; restore _bx
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_int386x(int intno, PMREGS *in, PMREGS *out,PMSREGS *sregs)
-;----------------------------------------------------------------------------
-; Issues a software interrupt in protected mode. This routine has been
-; written to allow user programs to load CS and DS with different values
-; other than the default.
-;----------------------------------------------------------------------------
-cprocstartdll16 PM_int386x
-
- ARG intno:UINT, inptr:DPTR, outptr:DPTR, sregs:DPTR
-
- LOCAL flags:UINT, sv_ds:UINT, sv_esi:ULONG = LocalSize
-
- enter_c
- push ds
- push es ; Save segment registers
- push fs
- push gs
-
- _lds _si,[sregs] ; DS:_SI -> Load segment registers
- mov es,[_si]
- mov bx,[_si+6]
- mov [sv_ds],_bx ; Save value of user DS on stack
- mov fs,[_si+8]
- mov gs,[_si+10]
-
- _lds _si,[inptr] ; Load CPU registers
- mov eax,[_si]
- mov ebx,[_si+4]
- mov ecx,[_si+8]
- mov edx,[_si+12]
- mov edi,[_si+20]
- mov esi,[_si+16]
-
- push ds ; Save value of DS
- push _bp ; Some interrupts trash this!
- clc ; Generate the interrupt
- push [UINT intno]
- mov ds,[WORD sv_ds] ; Set value of user's DS selector
- call _PM_genInt
- pop _bp ; Pop intno from stack (flags unchanged)
- pop _bp ; Restore value of stack frame pointer
- pop ds ; Restore value of DS
-
- pushf ; Save flags for later
- pop [UINT flags]
- push esi ; Save ESI for later
- pop [DWORD sv_esi]
- push ds ; Save DS for later
- pop [UINT sv_ds]
-
- _lds _si,[outptr] ; Save CPU registers
- mov [_si],eax
- mov [_si+4],ebx
- mov [_si+8],ecx
- mov [_si+12],edx
- push [DWORD sv_esi]
- pop [DWORD _si+16]
- mov [_si+20],edi
-
- mov _bx,[flags] ; Return flags
- and ebx,1h ; Isolate carry flag
- mov [_si+24],ebx ; Save carry flag status
-
- _lds _si,[sregs] ; Save segment registers
- mov [_si],es
- mov _bx,[sv_ds]
- mov [_si+6],bx ; Get returned DS from stack
- mov [_si+8],fs
- mov [_si+10],gs
-
- pop gs ; Restore segment registers
- pop fs
- pop es
- pop ds
- leave_c
- ret
-
-cprocend
-
-ifndef flatmodel
-_PM_savedDS dw _DATA ; Saved value of DS
-endif
-
-;----------------------------------------------------------------------------
-; void PM_saveDS(void)
-;----------------------------------------------------------------------------
-; Save the value of DS into a section of the code segment, so that we can
-; quickly load this value at a later date in the PM_loadDS() routine from
-; inside interrupt handlers etc. The method to do this is different
-; depending on the DOS extender being used.
-;----------------------------------------------------------------------------
-cprocstartdll16 PM_saveDS
-
-ifdef flatmodel
- mov [_PM_savedDS],ds ; Store away in data segment
-endif
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_loadDS(void)
-;----------------------------------------------------------------------------
-; Routine to load the DS register with the default value for the current
-; DOS extender. Only the DS register is loaded, not the ES register, so
-; if you wish to call C code, you will need to also load the ES register
-; in 32 bit protected mode.
-;----------------------------------------------------------------------------
-cprocstartdll16 PM_loadDS
-
- mov ds,[cs:_PM_savedDS] ; We can access the proper DS through CS
- ret
-
-cprocend
-
-ifdef flatmodel
-
-;----------------------------------------------------------------------------
-; ibool DPMI_allocateCallback(void (*pmcode)(), void *rmregs, long *RMCB)
-;----------------------------------------------------------------------------
-cprocstart _DPMI_allocateCallback
-
- ARG pmcode:CPTR, rmregs:DPTR, RMCB:DPTR
-
- enter_c
- push ds
- push es
-
- push cs
- pop ds
- mov esi,[pmcode] ; DS:ESI -> protected mode code to call
- mov edi,[rmregs] ; ES:EDI -> real mode register buffer
- mov ax,303h ; AX := allocate realmode callback function
- int 31h
- mov eax,0 ; Return failure!
- jc @@Fail
-
- mov eax,[RMCB]
- shl ecx,16
- mov cx,dx
- mov [es:eax],ecx ; Return real mode address
- mov eax,1 ; Return success!
-
-@@Fail: pop es
- pop ds
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void DPMI_freeCallback(long RMCB)
-;----------------------------------------------------------------------------
-cprocstart _DPMI_freeCallback
-
- ARG RMCB:ULONG
-
- enter_c
-
- mov cx,[WORD RMCB+2]
- mov dx,[WORD RMCB] ; CX:DX := real mode callback
- mov ax,304h
- int 31h
-
- leave_c
- ret
-
-cprocend
-
-endif
-
-; Macro to delay briefly to ensure that enough time has elapsed between
-; successive I/O accesses so that the device being accessed can respond
-; to both accesses even on a very fast PC.
-
-ifdef USE_NASM
-%macro DELAY 0
- jmp short $+2
- jmp short $+2
- jmp short $+2
-%endmacro
-%macro IODELAYN 1
-%rep %1
- DELAY
-%endrep
-%endmacro
-else
-macro DELAY
- jmp short $+2
- jmp short $+2
- jmp short $+2
-endm
-macro IODELAYN N
- rept N
- DELAY
- endm
-endm
-endif
-
-;----------------------------------------------------------------------------
-; uchar _PM_readCMOS(int index)
-;----------------------------------------------------------------------------
-; Read the value of a specific CMOS register. We do this with both
-; normal interrupts and NMI disabled.
-;----------------------------------------------------------------------------
-cprocstart _PM_readCMOS
-
- ARG index:UINT
-
- push _bp
- mov _bp,_sp
- pushfd
- mov al,[BYTE index]
- or al,80h ; Add disable NMI flag
- cli
- out 70h,al
- IODELAYN 5
- in al,71h
- mov ah,al
- xor al,al
- IODELAYN 5
- out 70h,al ; Re-enable NMI
- sti
- mov al,ah ; Return value in AL
- popfd
- pop _bp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _PM_writeCMOS(int index,uchar value)
-;----------------------------------------------------------------------------
-; Read the value of a specific CMOS register. We do this with both
-; normal interrupts and NMI disabled.
-;----------------------------------------------------------------------------
-cprocstart _PM_writeCMOS
-
- ARG index:UINT, value:UCHAR
-
- push _bp
- mov _bp,_sp
- pushfd
- mov al,[BYTE index]
- or al,80h ; Add disable NMI flag
- cli
- out 70h,al
- IODELAYN 5
- mov al,[value]
- out 71h,al
- xor al,al
- IODELAYN 5
- out 70h,al ; Re-enable NMI
- sti
- popfd
- pop _bp
- ret
-
-cprocend
-
-ifdef flatmodel
-
-;----------------------------------------------------------------------------
-; int _PM_pagingEnabled(void)
-;----------------------------------------------------------------------------
-; Returns 1 if paging is enabled, 0 if not or -1 if not at ring 0
-;----------------------------------------------------------------------------
-cprocstart _PM_pagingEnabled
-
- mov eax,-1
-ifdef DOS4GW
- mov cx,cs
- and ecx,3
- jz @@Ring0
- cmp [UINT _PM_haveCauseWay],0
- jnz @@Ring0
- jmp @@Exit
-
-@@Ring0:
- mov eax,cr0 ; Load CR0
- shr eax,31 ; Isolate paging enabled bit
-endif
-@@Exit: ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; _PM_getPDB - Return the Page Table Directory Base address
-;----------------------------------------------------------------------------
-cprocstart _PM_getPDB
-
-ifdef DOS4GW
- mov ax,cs
- and eax,3
- jz @@Ring0
- cmp [UINT _PM_haveCauseWay],0
- jnz @@Ring0
-endif
-
-; Call VxD if running at ring 3 in a DOS box
-
- cmp [WORD _PM_VXD_sel],0
- jz @@Fail
- mov eax,PMHELP_GETPDB
-ifdef USE_NASM
- call far dword [_PM_VXD_off]
-else
- call [FCPTR _PM_VXD_off]
-endif
- ret
-
-@@Ring0:
-ifdef DOS4GW
- mov eax,cr3
- and eax,0FFFFF000h
- ret
-endif
-@@Fail: xor eax,eax
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_flushTLB - Flush the Translation Lookaside buffer
-;----------------------------------------------------------------------------
-cprocstart PM_flushTLB
-
- mov ax,cs
- and eax,3
- jz @@Ring0
-ifdef DOS4GW
- cmp [UINT _PM_haveCauseWay],0
- jnz @@Ring0
-endif
-
-; Call VxD if running at ring 3 in a DOS box
-
- cmp [WORD _PM_VXD_sel],0
- jz @@Fail
- mov eax,PMHELP_FLUSHTLB
-ifdef USE_NASM
- call far dword [_PM_VXD_off]
-else
- call [FCPTR _PM_VXD_off]
-endif
- ret
-
-@@Ring0:
-ifdef DOS4GW
- wbinvd ; Flush the CPU cache
- mov eax,cr3
- mov cr3,eax ; Flush the TLB
-endif
-@@Fail: ret
-
-cprocend
-
-endif
-
-;----------------------------------------------------------------------------
-; void _PM_VxDCall(VXD_regs far *r,uint off,uint sel);
-;----------------------------------------------------------------------------
-cprocstart _PM_VxDCall
-
- ARG r:DPTR, off:UINT, sel:UINT
-
- enter_c
-
-; Load all registers from the registers structure
-
- mov ebx,[r]
- mov eax,[ebx+0]
- mov ecx,[ebx+8]
- mov edx,[ebx+12]
- mov esi,[ebx+16]
- mov edi,[ebx+20]
- mov ebx,[ebx+4] ; Trashes BX structure pointer!
-
-; Call the VxD entry point (on stack)
-
-ifdef USE_NASM
- call far dword [off]
-else
- call [FCPTR off]
-endif
-
-; Save all registers back in the structure
-
- push ebx ; Push EBX onto stack for later
- mov ebx,[r]
- mov [ebx+0],eax
- mov [ebx+8],ecx
- mov [ebx+12],edx
- mov [ebx+16],esi
- mov [ebx+20],edi
- pop [DWORD ebx+4] ; Save value of EBX from stack
-
- leave_c
- ret
-
-cprocend
-
-endcodeseg _pmdos
-
- END ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/_pmdos.asm b/board/MAI/bios_emulator/scitech/src/pm/dos/_pmdos.asm
deleted file mode 100644
index 5c741f346c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/_pmdos.asm
+++ /dev/null
@@ -1,1105 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Language: 80386 Assembler, TASM 4.0 or NASM
-;* Environment: IBM PC Real mode and 16/32 bit protected mode
-;*
-;* Description: Low level assembly support for the PM library specific to
-;* MSDOS interrupt handling.
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac" ; Memory model macros
-
-header _pmdos ; Set up memory model
-
-; Define the size of our local stacks. For real mode code they cant be
-; that big, but for 32 bit protected mode code we can make them nice and
-; large so that complex C functions can be used.
-
-ifdef flatmodel
-MOUSE_STACK EQU 4096
-TIMER_STACK EQU 4096
-KEY_STACK EQU 1024
-INT10_STACK EQU 1024
-IRQ_STACK EQU 1024
-else
-MOUSE_STACK EQU 1024
-TIMER_STACK EQU 512
-KEY_STACK EQU 256
-INT10_STACK EQU 256
-IRQ_STACK EQU 256
-endif
-
-ifdef USE_NASM
-
-; Macro to load DS and ES registers with correct value.
-
-%imacro LOAD_DS 0
-%ifdef flatmodel
- mov ds,[cs:_PM_savedDS]
- mov es,[cs:_PM_savedDS]
-%else
- push ax
- mov ax,_DATA
- mov ds,ax
- pop ax
-%endif
-%endmacro
-
-; Note that interrupts we disable interrupts during the following stack
-; %imacro for correct operation, but we do not enable them again. Normally
-; these %imacros are used within interrupt handlers so interrupts should
-; already be off. We turn them back on explicitly later if the user code
-; needs them to be back on.
-
-; Macro to switch to a new local stack.
-
-%imacro NEWSTK 1
- cli
- mov [seg_%1],ss
- mov [ptr_%1],_sp
- mov [TempSeg],ds
- mov ss,[TempSeg]
- mov _sp,offset %1
-%endmacro
-
-; %imacro to switch back to the old stack.
-
-%imacro RESTSTK 1
- cli
- mov ss,[seg_%1]
- mov _sp,[ptr_%1]
-%endmacro
-
-; %imacro to swap the current stack with the one saved away.
-
-%imacro SWAPSTK 1
- cli
- mov ax,ss
- xchg ax,[seg_%1]
- mov ss,ax
- xchg _sp,[ptr_%1]
-%endmacro
-
-else
-
-; Macro to load DS and ES registers with correct value.
-
-MACRO LOAD_DS
-ifdef flatmodel
- mov ds,[cs:_PM_savedDS]
- mov es,[cs:_PM_savedDS]
-else
- push ax
- mov ax,_DATA
- mov ds,ax
- pop ax
-endif
-ENDM
-
-; Note that interrupts we disable interrupts during the following stack
-; macro for correct operation, but we do not enable them again. Normally
-; these macros are used within interrupt handlers so interrupts should
-; already be off. We turn them back on explicitly later if the user code
-; needs them to be back on.
-
-; Macro to switch to a new local stack.
-
-MACRO NEWSTK stkname
- cli
- mov [seg_&stkname&],ss
- mov [ptr_&stkname&],_sp
- mov [TempSeg],ds
- mov ss,[TempSeg]
- mov _sp,offset stkname
-ENDM
-
-; Macro to switch back to the old stack.
-
-MACRO RESTSTK stkname
- cli
- mov ss,[seg_&stkname&]
- mov _sp,[ptr_&stkname&]
-ENDM
-
-; Macro to swap the current stack with the one saved away.
-
-MACRO SWAPSTK stkname
- cli
- mov ax,ss
- xchg ax,[seg_&stkname&]
- mov ss,ax
- xchg _sp,[ptr_&stkname&]
-ENDM
-
-endif
-
-begdataseg _pmdos
-
-ifdef flatmodel
- cextern _PM_savedDS,USHORT
-endif
- cextern _PM_critHandler,CPTR
- cextern _PM_breakHandler,CPTR
- cextern _PM_timerHandler,CPTR
- cextern _PM_rtcHandler,CPTR
- cextern _PM_keyHandler,CPTR
- cextern _PM_key15Handler,CPTR
- cextern _PM_mouseHandler,CPTR
- cextern _PM_int10Handler,CPTR
-
- cextern _PM_ctrlCPtr,DPTR
- cextern _PM_ctrlBPtr,DPTR
- cextern _PM_critPtr,DPTR
-
- cextern _PM_prevTimer,FCPTR
- cextern _PM_prevRTC,FCPTR
- cextern _PM_prevKey,FCPTR
- cextern _PM_prevKey15,FCPTR
- cextern _PM_prevBreak,FCPTR
- cextern _PM_prevCtrlC,FCPTR
- cextern _PM_prevCritical,FCPTR
- cextern _PM_prevRealTimer,ULONG
- cextern _PM_prevRealRTC,ULONG
- cextern _PM_prevRealKey,ULONG
- cextern _PM_prevRealKey15,ULONG
- cextern _PM_prevRealInt10,ULONG
-
-cpublic _PM_pmdosDataStart
-
-; Allocate space for all of the local stacks that we need. These stacks
-; are not very large, but should be large enough for most purposes
-; (generally you want to handle these interrupts quickly, simply storing
-; the information for later and then returning). If you need bigger
-; stacks then change the appropriate value in here.
-
- ALIGN 4
- dclb MOUSE_STACK ; Space for local stack (small)
-MsStack: ; Stack starts at end!
-ptr_MsStack DUINT 0 ; Place to store old stack offset
-seg_MsStack dw 0 ; Place to store old stack segment
-
- ALIGN 4
- dclb INT10_STACK ; Space for local stack (small)
-Int10Stack: ; Stack starts at end!
-ptr_Int10Stack DUINT 0 ; Place to store old stack offset
-seg_Int10Stack dw 0 ; Place to store old stack segment
-
- ALIGN 4
- dclb TIMER_STACK ; Space for local stack (small)
-TmStack: ; Stack starts at end!
-ptr_TmStack DUINT 0 ; Place to store old stack offset
-seg_TmStack dw 0 ; Place to store old stack segment
-
- ALIGN 4
- dclb TIMER_STACK ; Space for local stack (small)
-RtcStack: ; Stack starts at end!
-ptr_RtcStack DUINT 0 ; Place to store old stack offset
-seg_RtcStack dw 0 ; Place to store old stack segment
-RtcInside dw 0 ; Are we still handling current interrupt
-
- ALIGN 4
- dclb KEY_STACK ; Space for local stack (small)
-KyStack: ; Stack starts at end!
-ptr_KyStack DUINT 0 ; Place to store old stack offset
-seg_KyStack dw 0 ; Place to store old stack segment
-KyInside dw 0 ; Are we still handling current interrupt
-
- ALIGN 4
- dclb KEY_STACK ; Space for local stack (small)
-Ky15Stack: ; Stack starts at end!
-ptr_Ky15Stack DUINT 0 ; Place to store old stack offset
-seg_Ky15Stack dw 0 ; Place to store old stack segment
-
-TempSeg dw 0 ; Place to store stack segment
-
-cpublic _PM_pmdosDataEnd
-
-enddataseg _pmdos
-
-begcodeseg _pmdos ; Start of code segment
-
-cpublic _PM_pmdosCodeStart
-
-;----------------------------------------------------------------------------
-; PM_mouseISR - Mouse interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Interrupt subroutine called by the mouse driver upon interrupts, to
-; dispatch control to high level C based subroutines. Interrupts are on
-; when we call the user code.
-;
-; It is _extremely_ important to save the state of the extended registers
-; as these may well be trashed by the routines called from here and not
-; restored correctly by the mouse interface module.
-;
-; NOTE: This routine switches to a local stack before calling any C code,
-; and hence is _not_ re-entrant. For mouse handlers this is not a
-; problem, as the mouse driver arbitrates calls to the user mouse
-; handler for us.
-;
-; Entry: AX - Condition mask giving reason for call
-; BX - Mouse button state
-; CX - Horizontal cursor coordinate
-; DX - Vertical cursor coordinate
-; SI - Horizontal mickey value
-; DI - Vertical mickey value
-;
-;----------------------------------------------------------------------------
-ifdef DJGPP
-cprocstart _PM_mouseISR
-else
-cprocfar _PM_mouseISR
-endif
-
- push ds ; Save value of DS
- push es
- pushad ; Save _all_ extended registers
- cld ; Clear direction flag
-
- LOAD_DS ; Load DS register
- NEWSTK MsStack ; Switch to local stack
-
-; Call the installed high level C code routine
-
- clrhi dx ; Clear out high order values
- clrhi cx
- clrhi bx
- clrhi ax
- sgnhi si
- sgnhi di
-
- push _di
- push _si
- push _dx
- push _cx
- push _bx
- push _ax
- sti ; Enable interrupts
- call [CPTR _PM_mouseHandler]
- _add sp,12,24
-
- RESTSTK MsStack ; Restore previous stack
-
- popad ; Restore all extended registers
- pop es
- pop ds
- ret ; We are done!!
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_timerISR - Timer interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the timer interrupt, to dispatch control
-; to high level C based subroutines. We save the state of all registers
-; in this routine, and switch to a local stack. Interrupts are *off*
-; when we call the user code.
-;
-; NOTE: This routine switches to a local stack before calling any C code,
-; and hence is _not_ re-entrant. Make sure your C code executes as
-; quickly as possible, since a timer overrun will simply hang the
-; system.
-;----------------------------------------------------------------------------
-cprocfar _PM_timerISR
-
- push ds ; Save value of DS
- push es
- pushad ; Save _all_ extended registers
- cld ; Clear direction flag
-
- LOAD_DS ; Load DS register
-
- NEWSTK TmStack ; Switch to local stack
- call [CPTR _PM_timerHandler]
- RESTSTK TmStack ; Restore previous stack
-
- popad ; Restore all extended registers
- pop es
- pop ds
- iret ; Return from interrupt
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_chainPrevTimer - Chain to previous timer interrupt and return
-;----------------------------------------------------------------------------
-; Chains to the previous timer interrupt routine and returns control
-; back to the high level interrupt handler.
-;----------------------------------------------------------------------------
-cprocstart PM_chainPrevTimer
-
-ifdef TNT
- push eax
- push ebx
- push ecx
- pushfd ; Push flags on stack to simulate interrupt
- mov ax,250Eh ; Call real mode procedure function
- mov ebx,[_PM_prevRealTimer]
- mov ecx,1 ; Copy real mode flags to real mode stack
- int 21h ; Call the real mode code
- popfd
- pop ecx
- pop ebx
- pop eax
- ret
-else
- SWAPSTK TmStack ; Swap back to previous stack
- pushf ; Save state of interrupt flag
- pushf ; Push flags on stack to simulate interrupt
-ifdef USE_NASM
- call far dword [_PM_prevTimer]
-else
- call [_PM_prevTimer]
-endif
- popf ; Restore state of interrupt flag
- SWAPSTK TmStack ; Swap back to C stack again
- ret
-endif
-
-cprocend
-
-; Macro to delay briefly to ensure that enough time has elapsed between
-; successive I/O accesses so that the device being accessed can respond
-; to both accesses even on a very fast PC.
-
-ifdef USE_NASM
-%macro DELAY 0
- jmp short $+2
- jmp short $+2
- jmp short $+2
-%endmacro
-%macro IODELAYN 1
-%rep %1
- DELAY
-%endrep
-%endmacro
-else
-macro DELAY
- jmp short $+2
- jmp short $+2
- jmp short $+2
-endm
-macro IODELAYN N
- rept N
- DELAY
- endm
-endm
-endif
-
-;----------------------------------------------------------------------------
-; PM_rtcISR - Real time clock interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the timer interrupt, to dispatch control
-; to high level C based subroutines. We save the state of all registers
-; in this routine, and switch to a local stack. Interrupts are *off*
-; when we call the user code.
-;
-; NOTE: This routine switches to a local stack before calling any C code,
-; and hence is _not_ re-entrant. Make sure your C code executes as
-; quickly as possible, since a timer overrun will simply hang the
-; system.
-;----------------------------------------------------------------------------
-cprocfar _PM_rtcISR
-
- push ds ; Save value of DS
- push es
- pushad ; Save _all_ extended registers
- cld ; Clear direction flag
-
-; Clear priority interrupt controller and re-enable interrupts so we
-; dont lock things up for long.
-
- mov al,20h
- out 0A0h,al
- out 020h,al
-
-; Clear real-time clock timeout
-
- in al,70h ; Read CMOS index register
- push _ax ; and save for later
- IODELAYN 3
- mov al,0Ch
- out 70h,al
- IODELAYN 5
- in al,71h
-
-; Call the C interrupt handler function
-
- LOAD_DS ; Load DS register
- cmp [BYTE RtcInside],1 ; Check for mutual exclusion
- je @@Exit
- mov [BYTE RtcInside],1
- NEWSTK RtcStack ; Switch to local stack
- sti ; Re-enable interrupts
- call [CPTR _PM_rtcHandler]
- RESTSTK RtcStack ; Restore previous stack
- mov [BYTE RtcInside],0
-
-@@Exit: pop _ax
- out 70h,al ; Restore CMOS index register
- popad ; Restore all extended registers
- pop es
- pop ds
- iret ; Return from interrupt
-
-cprocend
-
-ifdef flatmodel
-;----------------------------------------------------------------------------
-; PM_irqISRTemplate - Hardware interrupt handler IRQ template
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for any interrupt, to dispatch control
-; to high level C based subroutines. We save the state of all registers
-; in this routine, and switch to a local stack. Interrupts are *off*
-; when we call the user code.
-;
-; NOTE: This routine switches to a local stack before calling any C code,
-; and hence is _not_ re-entrant. Make sure your C code executes as
-; quickly as possible.
-;----------------------------------------------------------------------------
-cprocfar _PM_irqISRTemplate
-
- push ebx
- mov ebx,0 ; Relocation adjustment factor
- jmp __IRQEntry
-
-; Global variables stored in the IRQ thunk code segment
-
-_CHandler dd 0 ; Pointer to C interrupt handler
-_PrevIRQ dd 0 ; Previous IRQ handler
- dd 0
-_IRQ dd 0 ; IRQ we are hooked for
-ptr_IRQStack DUINT 0 ; Place to store old stack offset
-seg_IRQStack dw 0 ; Place to store old stack segment
-_Inside db 0 ; Mutual exclusion flag
- ALIGN 4
- dclb IRQ_STACK ; Space for local stack
-_IRQStack: ; Stack starts at end!
-
-; Check for and reject spurious IRQ 7 signals
-
-__IRQEntry:
- cmp [BYTE cs:ebx+_IRQ],7 ; Spurious IRQs occur only on IRQ 7
- jmp @@ValidIRQ
- push eax
- mov al,1011b ; OCW3: read ISR
- out 20h,al ; (Intel Peripheral Components, 1991,
- in al,20h ; p. 3-188)
- shl al,1 ; Set C = bit 7 (IRQ 7) of ISR register
- pop eax
- jc @@ValidIRQ
- iret ; Return from interrupt
-
-; Save all registers for duration of IRQ handler
-
-@@ValidIRQ:
- push ds ; Save value of DS
- push es
- pushad ; Save _all_ extended registers
- cld ; Clear direction flag
- LOAD_DS ; Load DS register
-
-; Send an EOI to the PIC
-
- mov al,20h ; Send EOI to PIC
- cmp [BYTE ebx+_IRQ],8 ; Clear PIC1 first if IRQ >= 8
- jb @@1
- out 0A0h,al
-@@1: out 20h,al
-
-; Check for mutual exclusion
-
- cmp [BYTE ebx+_Inside],1
- je @@ChainOldHandler
- mov [BYTE ebx+_Inside],1
-
-; Call the C interrupt handler function
-
- mov [ebx+seg_IRQStack],ss ; Switch to local stack
- mov [ebx+ptr_IRQStack],esp
- mov [TempSeg],ds
- mov ss,[TempSeg]
- lea esp,[ebx+_IRQStack]
- sti ; Re-enable interrupts
- push ebx
- call [DWORD ebx+_CHandler]
- pop ebx
- cli
- mov ss,[ebx+seg_IRQStack] ; Restore previous stack
- mov esp,[ebx+ptr_IRQStack]
- or eax,eax
- jz @@ChainOldHandler ; Chain if not handled for shared IRQ
-
-@@Exit: mov [BYTE ebx+_Inside],0
- popad ; Restore all extended registers
- pop es
- pop ds
- pop ebx
- iret ; Return from interrupt
-
-@@ChainOldHandler:
- cmp [DWORD ebx+_PrevIRQ],0
- jz @@Exit
- mov [BYTE ebx+_Inside],0
- mov eax,[DWORD ebx+_PrevIRQ]
- mov ebx,[DWORD ebx+_PrevIRQ+4]
- mov [DWORD _PrevIRQ],eax
- mov [DWORD _PrevIRQ+4],ebx
- popad ; Restore all extended registers
- pop es
- pop ds
- pop ebx
- jmp [cs:_PrevIRQ] ; Chain to previous IRQ handler
-
-cprocend
-cpublic _PM_irqISRTemplateEnd
-endif
-
-;----------------------------------------------------------------------------
-; PM_keyISR - keyboard interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the keyboard interrupt, to dispatch control
-; to high level C based subroutines. We save the state of all registers
-; in this routine, and switch to a local stack. Interrupts are *off*
-; when we call the user code.
-;
-; NOTE: This routine switches to a local stack before calling any C code,
-; and hence is _not_ re-entrant. However we ensure within this routine
-; mutual exclusion to the keyboard handling routine.
-;----------------------------------------------------------------------------
-cprocfar _PM_keyISR
-
- push ds ; Save value of DS
- push es
- pushad ; Save _all_ extended registers
- cld ; Clear direction flag
-
- LOAD_DS ; Load DS register
-
- cmp [BYTE KyInside],1 ; Check for mutual exclusion
- je @@Reissued
-
- mov [BYTE KyInside],1
- NEWSTK KyStack ; Switch to local stack
- call [CPTR _PM_keyHandler] ; Call C code
- RESTSTK KyStack ; Restore previous stack
- mov [BYTE KyInside],0
-
-@@Exit: popad ; Restore all extended registers
- pop es
- pop ds
- iret ; Return from interrupt
-
-; When the BIOS keyboard handler needs to change the SHIFT status lights
-; on the keyboard, in the process of doing this the keyboard controller
-; re-issues another interrupt, while the current handler is still executing.
-; If we recieve another interrupt while still handling the current one,
-; then simply chain directly to the previous handler.
-;
-; Note that for most DOS extenders, the real mode interrupt handler that we
-; install takes care of this for us.
-
-@@Reissued:
-ifdef TNT
- push eax
- push ebx
- push ecx
- pushfd ; Push flags on stack to simulate interrupt
- mov ax,250Eh ; Call real mode procedure function
- mov ebx,[_PM_prevRealKey]
- mov ecx,1 ; Copy real mode flags to real mode stack
- int 21h ; Call the real mode code
- popfd
- pop ecx
- pop ebx
- pop eax
-else
- pushf
-ifdef USE_NASM
- call far dword [_PM_prevKey]
-else
- call [_PM_prevKey]
-endif
-endif
- jmp @@Exit
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_chainPrevkey - Chain to previous key interrupt and return
-;----------------------------------------------------------------------------
-; Chains to the previous key interrupt routine and returns control
-; back to the high level interrupt handler.
-;----------------------------------------------------------------------------
-cprocstart PM_chainPrevKey
-
-ifdef TNT
- push eax
- push ebx
- push ecx
- pushfd ; Push flags on stack to simulate interrupt
- mov ax,250Eh ; Call real mode procedure function
- mov ebx,[_PM_prevRealKey]
- mov ecx,1 ; Copy real mode flags to real mode stack
- int 21h ; Call the real mode code
- popfd
- pop ecx
- pop ebx
- pop eax
- ret
-else
-
-; YIKES! For some strange reason, when execution returns from the
-; previous keyboard handler, interrupts are re-enabled!! Since we expect
-; interrupts to remain off during the duration of our handler, this can
-; cause havoc. However our stack macros always turn off interrupts, so they
-; will be off when we exit this routine. Obviously there is a tiny weeny
-; window when interrupts will be enabled, but there is nothing we can
-; do about this.
-
- SWAPSTK KyStack ; Swap back to previous stack
- pushf ; Push flags on stack to simulate interrupt
-ifdef USE_NASM
- call far dword [_PM_prevKey]
-else
- call [_PM_prevKey]
-endif
- SWAPSTK KyStack ; Swap back to C stack again
- ret
-endif
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_key15ISR - Int 15h keyboard interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; This routine gets called if we have been called to handle the Int 15h
-; keyboard interrupt callout from real mode.
-;
-; Entry: AX - Hardware scan code to process
-; Exit: AX - Hardware scan code to process (0 to ignore)
-;----------------------------------------------------------------------------
-cprocfar _PM_key15ISR
-
- push ds
- push es
- LOAD_DS
- cmp ah,4Fh
- jnz @@NotOurs ; Quit if not keyboard callout
-
- pushad
- cld ; Clear direction flag
- xor ah,ah ; AX := scan code
- NEWSTK Ky15Stack ; Switch to local stack
- push _ax
- call [CPTR _PM_key15Handler] ; Call C code
- _add sp,2,4
- RESTSTK Ky15Stack ; Restore previous stack
- test ax,ax
- jz @@1
- stc ; Set carry to process as normal
- jmp @@2
-@@1: clc ; Clear carry to ignore scan code
-@@2: popad
- jmp @@Exit ; We are done
-
-@@NotOurs:
-ifdef TNT
- push eax
- push ebx
- push ecx
- pushfd ; Push flags on stack to simulate interrupt
- mov ax,250Eh ; Call real mode procedure function
- mov ebx,[_PM_prevRealKey15]
- mov ecx,1 ; Copy real mode flags to real mode stack
- int 21h ; Call the real mode code
- popfd
- pop ecx
- pop ebx
- pop eax
-else
- pushf
-ifdef USE_NASM
- call far dword [_PM_prevKey15]
-else
- call [_PM_prevKey15]
-endif
-endif
-@@Exit: pop es
- pop ds
-ifdef flatmodel
- retf 4
-else
- retf 2
-endif
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_breakISR - Control Break interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the Ctrl-Break interrupt. We simply set
-; the Ctrl-Break flag to a 1 and leave (note that this is accessed through
-; a far pointer, as it may well be located in conventional memory).
-;----------------------------------------------------------------------------
-cprocfar _PM_breakISR
-
- sti
- push ds ; Save value of DS
- push es
- push _bx
-
- LOAD_DS ; Load DS register
-ifdef flatmodel
- mov ebx,[_PM_ctrlBPtr]
-else
- les bx,[_PM_ctrlBPtr]
-endif
- mov [UINT _ES _bx],1
-
-; Run alternate break handler code if installed
-
- cmp [CPTR _PM_breakHandler],0
- je @@Exit
-
- pushad
- mov _ax,1
- push _ax
- call [CPTR _PM_breakHandler] ; Call C code
- pop _ax
- popad
-
-@@Exit: pop _bx
- pop es
- pop ds
- iret ; Return from interrupt
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_ctrlBreakHit(int clearFlag)
-;----------------------------------------------------------------------------
-; Returns the current state of the Ctrl-Break flag and possibly clears it.
-;----------------------------------------------------------------------------
-cprocstart PM_ctrlBreakHit
-
- ARG clearFlag:UINT
-
- enter_c
- pushf ; Save interrupt status
- push es
-ifdef flatmodel
- mov ebx,[_PM_ctrlBPtr]
-else
- les bx,[_PM_ctrlBPtr]
-endif
- cli ; No interrupts thanks!
- mov _ax,[_ES _bx]
- test [BYTE clearFlag],1
- jz @@Done
- mov [UINT _ES _bx],0
-
-@@Done: pop es
- popf ; Restore interrupt status
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_ctrlCISR - Control Break interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the Ctrl-C interrupt. We simply set
-; the Ctrl-C flag to a 1 and leave (note that this is accessed through
-; a far pointer, as it may well be located in conventional memory).
-;----------------------------------------------------------------------------
-cprocfar _PM_ctrlCISR
-
- sti
- push ds ; Save value of DS
- push es
- push _bx
-
- LOAD_DS ; Load DS register
-ifdef flatmodel
- mov ebx,[_PM_ctrlCPtr]
-else
- les bx,[_PM_ctrlCPtr]
-endif
- mov [UINT _ES _bx],1
-
-; Run alternate break handler code if installed
-
- cmp [CPTR _PM_breakHandler],0
- je @@Exit
-
- pushad
- mov _ax,0
- push _ax
- call [CPTR _PM_breakHandler] ; Call C code
- pop _ax
- popad
-
-@@Exit: pop _bx
- pop es
- pop ds
- iret ; Return from interrupt
- iretd
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_ctrlCHit(int clearFlag)
-;----------------------------------------------------------------------------
-; Returns the current state of the Ctrl-C flag and possibly clears it.
-;----------------------------------------------------------------------------
-cprocstart PM_ctrlCHit
-
- ARG clearFlag:UINT
-
- enter_c
- pushf ; Save interrupt status
- push es
-ifdef flatmodel
- mov ebx,[_PM_ctrlCPtr]
-else
- les bx,[_PM_ctrlCPtr]
-endif
- cli ; No interrupts thanks!
- mov _ax,[_ES _bx]
- test [BYTE clearFlag],1
- jz @@Done
- mov [UINT _ES _bx],0
-
-@@Done:
- pop es
- popf ; Restore interrupt status
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_criticalISR - Control Error handler interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Interrupt handler for the MSDOS Critical Error interrupt, to dispatch
-; control to high level C based subroutines. We save the state of all
-; registers in this routine, and switch to a local stack. We also pass
-; the values of the AX and DI registers to the as pointers, so that the
-; values can be modified before returning to MSDOS.
-;----------------------------------------------------------------------------
-cprocfar _PM_criticalISR
-
- sti
- push ds ; Save value of DS
- push es
- push _bx ; Save register values changed
- cld ; Clear direction flag
-
- LOAD_DS ; Load DS register
-ifdef flatmodel
- mov ebx,[_PM_critPtr]
-else
- les bx,[_PM_critPtr]
-endif
- mov [_ES _bx],ax
- mov [_ES _bx+2],di
-
-; Run alternate critical handler code if installed
-
- cmp [CPTR _PM_critHandler],0
- je @@NoAltHandler
-
- pushad
- push _di
- push _ax
- call [CPTR _PM_critHandler] ; Call C code
- _add sp,4,8
- popad
-
- pop _bx
- pop es
- pop ds
- iret ; Return from interrupt
-
-@@NoAltHandler:
- mov ax,3 ; Tell MSDOS to fail the operation
- pop _bx
- pop es
- pop ds
- iret ; Return from interrupt
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_criticalError(int *axVal,int *diVal,int clearFlag)
-;----------------------------------------------------------------------------
-; Returns the current state of the critical error flags, and the values that
-; MSDOS passed in the AX and DI registers to our handler.
-;----------------------------------------------------------------------------
-cprocstart PM_criticalError
-
- ARG axVal:DPTR, diVal:DPTR, clearFlag:UINT
-
- enter_c
- pushf ; Save interrupt status
- push es
-ifdef flatmodel
- mov ebx,[_PM_critPtr]
-else
- les bx,[_PM_critPtr]
-endif
- cli ; No interrupts thanks!
- xor _ax,_ax
- xor _di,_di
- mov ax,[_ES _bx]
- mov di,[_ES _bx+2]
- test [BYTE clearFlag],1
- jz @@NoClear
- mov [ULONG _ES _bx],0
-@@NoClear:
- _les _bx,[axVal]
- mov [_ES _bx],_ax
- _les _bx,[diVal]
- mov [_ES _bx],_di
- pop es
- popf ; Restore interrupt status
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setMouseHandler(int mask, PM_mouseHandler mh)
-;----------------------------------------------------------------------------
-cprocstart _PM_setMouseHandler
-
- ARG mouseMask:UINT
-
- enter_c
- push es
-
- mov ax,0Ch ; AX := Function 12 - install interrupt sub
- mov _cx,[mouseMask] ; CX := mouse mask
- mov _dx,offset _PM_mouseISR
- push cs
- pop es ; ES:_DX -> mouse handler
- int 33h ; Call mouse driver
-
- pop es
- leave_c
- ret
-
-cprocend
-
-ifdef flatmodel
-
-;----------------------------------------------------------------------------
-; void PM_mousePMCB(void)
-;----------------------------------------------------------------------------
-; Mouse realmode callback routine. Upon entry to this routine, we recieve
-; the following from the DPMI server:
-;
-; Entry: DS:_SI -> Real mode stack at time of call
-; ES:_DI -> Real mode register data structure
-; SS:_SP -> Locked protected mode stack to use
-;----------------------------------------------------------------------------
-cprocfar _PM_mousePMCB
-
- pushad
- mov eax,[es:_di+1Ch] ; Load register values from real mode
- mov ebx,[es:_di+10h]
- mov ecx,[es:_di+18h]
- mov edx,[es:_di+14h]
- mov esi,[es:_di+04h]
- mov edi,[es:_di]
- call _PM_mouseISR ; Call the mouse handler
- popad
-
- mov ax,[ds:_si]
- mov [es:_di+2Ah],ax ; Plug in return IP address
- mov ax,[ds:_si+2]
- mov [es:_di+2Ch],ax ; Plug in return CS value
- add [WORD es:_di+2Eh],4 ; Remove return address from stack
- iret ; Go back to real mode!
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_int10PMCB(void)
-;----------------------------------------------------------------------------
-; int10 realmode callback routine. Upon entry to this routine, we recieve
-; the following from the DPMI server:
-;
-; Entry: DS:ESI -> Real mode stack at time of call
-; ES:EDI -> Real mode register data structure
-; SS:ESP -> Locked protected mode stack to use
-;----------------------------------------------------------------------------
-cprocfar _PM_int10PMCB
-
- pushad
- push ds
- push es
- push fs
-
- pushfd
- pop eax
- mov [es:edi+20h],ax ; Save return flag status
- mov ax,[ds:esi]
- mov [es:edi+2Ah],ax ; Plug in return IP address
- mov ax,[ds:esi+2]
- mov [es:edi+2Ch],ax ; Plug in return CS value
- add [WORD es:edi+2Eh],4 ; Remove return address from stack
-
-; Call the install int10 handler in protected mode. This function gets called
-; with DS set to the current data selector, and ES:EDI pointing the the
-; real mode DPMI register structure at the time of the interrupt. The
-; handle must be written in assembler to be able to extract the real mode
-; register values from the structure
-
- push es
- pop fs ; FS:EDI -> real mode registers
- LOAD_DS
- NEWSTK Int10Stack ; Switch to local stack
-
- call [_PM_int10Handler]
-
- RESTSTK Int10Stack ; Restore previous stack
- pop fs
- pop es
- pop ds
- popad
- iret ; Go back to real mode!
-
-cprocend
-
-endif
-
-cpublic _PM_pmdosCodeEnd
-
-endcodeseg _pmdos
-
- END ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/_vflat.asm b/board/MAI/bios_emulator/scitech/src/pm/dos/_vflat.asm
deleted file mode 100644
index 34985a9d8b..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/_vflat.asm
+++ /dev/null
@@ -1,652 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Based on original code Copyright 1994 Otto Chrons
-;*
-;* Language: 80386 Assembler, TASM 4.0 or later
-;* Environment: IBM PC 32 bit protected mode
-;*
-;* Description: Low level page fault handler for virtual linear framebuffers.
-;*
-;****************************************************************************
-
- IDEAL
- JUMPS
-
-include "scitech.mac" ; Memory model macros
-
-header _vflat ; Set up memory model
-
-VFLAT_START EQU 0F0000000h
-VFLAT_END EQU 0F03FFFFFh
-PAGE_PRESENT EQU 1
-PAGE_NOTPRESENT EQU 0
-PAGE_READ EQU 0
-PAGE_WRITE EQU 2
-
-ifdef DOS4GW
-
-;----------------------------------------------------------------------------
-; DOS4G/W flat linear framebuffer emulation.
-;----------------------------------------------------------------------------
-
-begdataseg _vflat
-
-; Near pointers to the page directory base and our page tables. All of
-; this memory is always located in the first Mb of DOS memory.
-
-PDBR dd 0 ; Page directory base register (CR3)
-accessPageAddr dd 0
-accessPageTable dd 0
-
-; CauseWay page directory & 1st page table linear addresses.
-
-CauseWayDIRLinear dd 0
-CauseWay1stLinear dd 0
-
-; Place to store a copy of the original Page Table Directory before we
-; intialised our virtual buffer code.
-
-pageDirectory: resd 1024 ; Saved page table directory
-
-ValidCS dw 0 ; Valid CS for page faults
-Ring0CS dw 0 ; Our ring 0 code selector
-LastPage dd 0 ; Last page we mapped in
-BankFuncBuf: resb 101 ; Place to store bank switch code
-BankFuncPtr dd offset BankFuncBuf
-
-INT14Gate:
-INT14Offset dd 0 ; eip of original vector
-INT14Selector dw 0 ; cs of original vector
-
- cextern _PM_savedDS,USHORT
- cextern VF_haveCauseWay,BOOL
-
-enddataseg _vflat
-
-begcodeseg _vflat ; Start of code segment
-
- cextern VF_malloc,FPTR
-
-;----------------------------------------------------------------------------
-; PF_handler64k - Page fault handler for 64k banks
-;----------------------------------------------------------------------------
-; The handler below is a 32 bit ring 0 page fault handler. It receives
-; control immediately after any page fault or after an IRQ6 (hardware
-; interrupt). This provides the fastest possible handling of page faults
-; since it jump directly here. If this is a page fault, the number
-; immediately on the stack will be an error code, at offset 4 will be
-; the eip of the faulting instruction, at offset 8 will be the cs of the
-; faulting instruction. If it is a hardware interrupt, it will not have
-; the error code and the eflags will be at offset 8.
-;----------------------------------------------------------------------------
-cprocfar PF_handler64k
-
-; Check if this is a processor exeception or a page fault
-
- push eax
- mov ax,[cs:ValidCS] ; Use CS override to access data
- cmp [ss:esp+12],ax ; Is this a page fault?
- jne @@ToOldHandler ; Nope, jump to the previous handler
-
-; Get address of page fault and check if within our handlers range
-
- mov eax,cr2 ; EBX has page fault linear address
- cmp eax,VFLAT_START ; Is the fault less than ours?
- jb @@ToOldHandler ; Yep, go to previous handler
- cmp eax,VFLAT_END ; Is the fault more than ours?
- jae @@ToOldHandler ; Yep, go to previous handler
-
-; This is our page fault, so we need to handle it
-
- pushad
- push ds
- push es
- mov ebx,eax ; EBX := page fault address
- and ebx,invert 0FFFFh ; Mask to 64k bank boundary
- mov ds,[cs:_PM_savedDS]; Load segment registers
- mov es,[cs:_PM_savedDS]
-
-; Map in the page table for our virtual framebuffer area for modification
-
- mov edi,[PDBR] ; EDI points to page directory
- mov edx,ebx ; EDX = linear address
- shr edx,22 ; EDX = offset to page directory
- mov edx,[edx*4+edi] ; EDX = physical page table address
- mov eax,edx
- mov edx,[accessPageTable]
- or eax,7
- mov [edx],eax
- mov eax,cr3
- mov cr3,eax ; Update page table cache
-
-; Mark all pages valid for the new page fault area
-
- mov esi,ebx ; ESI := linear address for page
- shr esi,10
- and esi,0FFFh ; Offset into page table
- add esi,[accessPageAddr]
-ifdef USE_NASM
-%assign off 0
-%rep 16
- or [DWORD esi+off],0000000001h ; Enable pages
-%assign off off+4
-%endrep
-else
-off = 0
-REPT 16
- or [DWORD esi+off],0000000001h ; Enable pages
-off = off+4
-ENDM
-endif
-
-; Mark all pages invalid for the previously mapped area
-
- xchg esi,[LastPage] ; Save last page for next page fault
- test esi,esi
- jz @@DoneMapping ; Dont update if first time round
-ifdef USE_NASM
-%assign off 0
-%rep 16
- or [DWORD esi+off],0FFFFFFFEh ; Disable pages
-%assign off off+4
-%endrep
-else
-off = 0
-REPT 16
- and [DWORD esi+off],0FFFFFFFEh ; Disable pages
-off = off+4
-ENDM
-endif
-
-@@DoneMapping:
- mov eax,cr3
- mov cr3,eax ; Flush the TLB
-
-; Now program the new SuperVGA starting bank address
-
- mov eax,ebx ; EAX := page fault address
- shr eax,16
- and eax,0FFh ; Mask to 0-255
- call [BankFuncPtr] ; Call the bank switch function
-
- pop es
- pop ds
- popad
- pop eax
- add esp,4 ; Pop the error code from stack
- iretd ; Return to faulting instruction
-
-@@ToOldHandler:
- pop eax
-ifdef USE_NASM
- jmp far dword [cs:INT14Gate]; Chain to previous handler
-else
- jmp [FWORD cs:INT14Gate]; Chain to previous handler
-endif
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PF_handler4k - Page fault handler for 4k banks
-;----------------------------------------------------------------------------
-; The handler below is a 32 bit ring 0 page fault handler. It receives
-; control immediately after any page fault or after an IRQ6 (hardware
-; interrupt). This provides the fastest possible handling of page faults
-; since it jump directly here. If this is a page fault, the number
-; immediately on the stack will be an error code, at offset 4 will be
-; the eip of the faulting instruction, at offset 8 will be the cs of the
-; faulting instruction. If it is a hardware interrupt, it will not have
-; the error code and the eflags will be at offset 8.
-;----------------------------------------------------------------------------
-cprocfar PF_handler4k
-
-; Fill in when we have tested all the 64Kb code
-
-ifdef USE_NASM
- jmp far dword [cs:INT14Gate]; Chain to previous handler
-else
- jmp [FWORD cs:INT14Gate]; Chain to previous handler
-endif
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void InstallFaultHandler(void *baseAddr,int bankSize)
-;----------------------------------------------------------------------------
-; Installes the page fault handler directly int the interrupt descriptor
-; table for maximum performance. This of course requires ring 0 access,
-; but none of this stuff will run without ring 0!
-;----------------------------------------------------------------------------
-cprocstart InstallFaultHandler
-
- ARG baseAddr:ULONG, bankSize:UINT
-
- enter_c
-
- mov [DWORD LastPage],0 ; No pages have been mapped
- mov ax,cs
- mov [ValidCS],ax ; Save CS value for page faults
-
-; Put address of our page fault handler into the IDT directly
-
- sub esp,6 ; Allocate space on stack
-ifdef USE_NASM
- sidt [ss:esp] ; Store pointer to IDT
-else
- sidt [FWORD ss:esp] ; Store pointer to IDT
-endif
- pop ax ; add esp,2
- pop eax ; Absolute address of IDT
- add eax,14*8 ; Point to Int #14
-
-; Note that Interrupt gates do not have the high and low word of the
-; offset in adjacent words in memory, there are 4 bytes separating them.
-
- mov ecx,[eax] ; Get cs and low 16 bits of offset
- mov edx,[eax+6] ; Get high 16 bits of offset in dx
- shl edx,16
- mov dx,cx ; edx has offset
- mov [INT14Offset],edx ; Save offset
- shr ecx,16
- mov [INT14Selector],cx ; Save original cs
- mov [eax+2],cs ; Install new cs
- mov edx,offset PF_handler64k
- cmp [UINT bankSize],4
- jne @@1
- mov edx,offset PF_handler4k
-@@1: mov [eax],dx ; Install low word of offset
- shr edx,16
- mov [eax+6],dx ; Install high word of offset
-
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void RemoveFaultHandler(void)
-;----------------------------------------------------------------------------
-; Closes down the virtual framebuffer services and restores the previous
-; page fault handler.
-;----------------------------------------------------------------------------
-cprocstart RemoveFaultHandler
-
- enter_c
-
-; Remove page fault handler from IDT
-
- sub esp,6 ; Allocate space on stack
-ifdef USE_NASM
- sidt [ss:esp] ; Store pointer to IDT
-else
- sidt [FWORD ss:esp] ; Store pointer to IDT
-endif
-
- pop ax ; add esp,2
- pop eax ; Absolute address of IDT
- add eax,14*8 ; Point to Int #14
- mov cx,[INT14Selector]
- mov [eax+2],cx ; Restore original CS
- mov edx,[INT14Offset]
- mov [eax],dx ; Install low word of offset
- shr edx,16
- mov [eax+6],dx ; Install high word of offset
-
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void InstallBankFunc(int codeLen,void *bankFunc)
-;----------------------------------------------------------------------------
-; Installs the bank switch function by relocating it into our data segment
-; and making it into a callable function. We do it this way to make the
-; code identical to the way that the VflatD devices work under Windows.
-;----------------------------------------------------------------------------
-cprocstart InstallBankFunc
-
- ARG codeLen:UINT, bankFunc:DPTR
-
- enter_c
-
- mov esi,[bankFunc] ; Copy the code into buffer
- mov edi,offset BankFuncBuf
- mov ecx,[codeLen]
- rep movsb
- mov [BYTE edi],0C3h ; Terminate the function with a near ret
-
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int InitPaging(void)
-;----------------------------------------------------------------------------
-; Initializes paging system. If paging is not enabled, builds a page table
-; directory and page tables for physical memory
-;
-; Exit: 0 - Successful
-; -1 - Couldn't initialize paging mechanism
-;----------------------------------------------------------------------------
-cprocstart InitPaging
-
- push ebx
- push ecx
- push edx
- push esi
- push edi
-
-; Are we running under CauseWay?
-
- mov ax,0FFF9h
- int 31h
- jc @@NotCauseway
- cmp ecx,"CAUS"
- jnz @@NotCauseway
- cmp edx,"EWAY"
- jnz @@NotCauseway
-
- mov [BOOL VF_haveCauseWay],1
- mov [CauseWayDIRLinear],esi
- mov [CauseWay1stLinear],edi
-
-; Check for DPMI
-
- mov ax,0ff00h
- push es
- int 31h
- pop es
- shr edi,2
- and edi,3
- cmp edi,2
- jz @@ErrExit ; Not supported under DPMI
-
- mov eax,[CauseWayDIRLinear]
- jmp @@CopyCR3
-
-@@NotCauseway:
- mov ax,cs
- test ax,3 ; Which ring are we running
- jnz @@ErrExit ; Needs zero ring to access
- ; page tables (CR3)
- mov eax,cr0 ; Load CR0
- test eax,80000000h ; Is paging enabled?
- jz @@ErrExit ; No, we must have paging!
-
- mov eax,cr3 ; Load directory address
- and eax,0FFFFF000h
-
-@@CopyCR3:
- mov [PDBR],eax ; Save it
- mov esi,eax
- mov edi,offset pageDirectory
- mov ecx,1024
- cld
- rep movsd ; Copy the original page table directory
- cmp [DWORD accessPageAddr],0; Check if we have allocated page
- jne @@HaveRealMem ; table already (we cant free it)
-
- mov eax,0100h ; DPMI DOS allocate
- mov ebx,8192/16
- int 31h ; Allocate 8192 bytes
- and eax,0FFFFh
- shl eax,4 ; EAX points to newly allocated memory
- add eax,4095
- and eax,0FFFFF000h ; Page align
- mov [accessPageAddr],eax
-
-@@HaveRealMem:
- mov eax,[accessPageAddr] ; EAX -> page table in 1st Mb
- shr eax,12
- and eax,3FFh ; Page table offset
- shl eax,2
- cmp [BOOL VF_haveCauseWay],0
- jz @@NotCW0
- mov ebx,[CauseWay1stLinear]
- jmp @@Put1st
-
-@@NotCW0:
- mov ebx,[PDBR]
- mov ebx,[ebx]
- and ebx,0FFFFF000h ; Page table for 1st megabyte
-
-@@Put1st:
- add eax,ebx
- mov [accessPageTable],eax
- sub eax,eax ; No error
- jmp @@Exit
-
-@@ErrExit:
- mov eax,-1
-
-@@Exit: pop edi
- pop esi
- pop edx
- pop ecx
- pop ebx
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void ClosePaging(void)
-;----------------------------------------------------------------------------
-; Closes the paging system
-;----------------------------------------------------------------------------
-cprocstart ClosePaging
-
- push eax
- push ecx
- push edx
- push esi
- push edi
-
- mov eax,[accessPageAddr]
- call AccessPage ; Restore AccessPage mapping
- mov edi,[PDBR]
- mov esi,offset pageDirectory
- mov ecx,1024
- cld
- rep movsd ; Restore the original page table directory
-
-@@Exit: pop edi
- pop esi
- pop edx
- pop ecx
- pop eax
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; long AccessPage(long phys)
-;----------------------------------------------------------------------------
-; Maps a known page to given physical memory
-; Entry: EAX - Physical memory
-; Exit: EAX - Linear memory address of mapped phys mem
-;----------------------------------------------------------------------------
-cprocstatic AccessPage
-
- push edx
- mov edx,[accessPageTable]
- or eax,7
- mov [edx],eax
- mov eax,cr3
- mov cr3,eax ; Update page table cache
- mov eax,[accessPageAddr]
- pop edx
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; long GetPhysicalAddress(long linear)
-;----------------------------------------------------------------------------
-; Returns the physical address of linear address
-; Entry: EAX - Linear address to convert
-; Exit: EAX - Physical address
-;----------------------------------------------------------------------------
-cprocstatic GetPhysicalAddress
-
- push ebx
- push edx
- mov edx,eax
- shr edx,22 ; EDX is the directory offset
- mov ebx,[PDBR]
- mov edx,[edx*4+ebx] ; Load page table address
- push eax
- mov eax,edx
- call AccessPage ; Access the page table
- mov edx,eax
- pop eax
- shr eax,12
- and eax,03FFh ; EAX offset into page table
- mov eax,[edx+eax*4] ; Load physical address
- and eax,0FFFFF000h
- pop edx
- pop ebx
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void CreatePageTable(long pageDEntry)
-;----------------------------------------------------------------------------
-; Creates a page table for specific address (4MB)
-; Entry: EAX - Page directory entry (top 10-bits of address)
-;----------------------------------------------------------------------------
-cprocstatic CreatePageTable
-
- push ebx
- push ecx
- push edx
- push edi
- mov ebx,eax ; Save address
- mov eax,8192
- push eax
- call VF_malloc ; Allocate page table directory
- add esp,4
- add eax,0FFFh
- and eax,0FFFFF000h ; Page align (4KB)
- mov edi,eax ; Save page table linear address
- sub eax,eax ; Fill with zero
- mov ecx,1024
- cld
- rep stosd ; Clear page table
- sub edi,4096
- mov eax,edi
- call GetPhysicalAddress
- mov edx,[PDBR]
- or eax,7 ; Present/write/user bit
- mov [edx+ebx*4],eax ; Save physical address into page directory
- mov eax,cr3
- mov cr3,eax ; Update page table cache
- pop edi
- pop edx
- pop ecx
- pop ebx
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void MapPhysical2Linear(ulong pAddr, ulong lAddr, int pages, int flags);
-;----------------------------------------------------------------------------
-; Maps physical memory into linear memory
-; Entry: pAddr - Physical address
-; lAddr - Linear address
-; pages - Number of 4K pages to map
-; flags - Page flags
-; bit 0 = present
-; bit 1 = Read(0)/Write(1)
-;----------------------------------------------------------------------------
-cprocstart MapPhysical2Linear
-
- ARG pAddr:ULONG, lAddr:ULONG, pages:UINT, pflags:UINT
-
- enter_c
-
- and [ULONG pAddr],0FFFFF000h; Page boundary
- and [ULONG lAddr],0FFFFF000h; Page boundary
- mov ecx,[pflags]
- and ecx,11b ; Just two bits
- or ecx,100b ; Supervisor bit
- mov [pflags],ecx
-
- mov edx,[lAddr]
- shr edx,22 ; EDX = Directory
- mov esi,[PDBR]
- mov edi,[pages] ; EDI page count
- mov ebx,[lAddr]
-
-@@CreateLoop:
- mov ecx,[esi+edx*4] ; Load page table address
- test ecx,1 ; Is it present?
- jnz @@TableOK
- mov eax,edx
- call CreatePageTable ; Create a page table
-@@TableOK:
- mov eax,ebx
- shr eax,12
- and eax,3FFh
- sub eax,1024
- neg eax ; EAX = page count in this table
- inc edx ; Next table
- mov ebx,0 ; Next time we'll map 1K pages
- sub edi,eax ; Subtract mapped pages from page count
- jns @@CreateLoop ; Create more tables if necessary
-
- mov ecx,[pages] ; ECX = Page count
- mov esi,[lAddr]
- shr esi,12 ; Offset part isn't needed
- mov edi,[pAddr]
-@@MappingLoop:
- mov eax,esi
- shr eax,10 ; EAX = offset to page directory
- mov ebx,[PDBR]
- mov eax,[eax*4+ebx] ; EAX = page table address
- call AccessPage
- mov ebx,esi
- and ebx,3FFh ; EBX = offset to page table
- mov edx,edi
- add edi,4096 ; Next physical address
- inc esi ; Next linear page
- or edx,[pflags] ; Update flags...
- mov [eax+ebx*4],edx ; Store page table entry
- loop @@MappingLoop
- mov eax,cr3
- mov cr3,eax ; Update page table cache
-
- leave_c
- ret
-
-cprocend
-
-endcodeseg _vflat
-
-endif
-
- END ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/dos/cpuinfo.c
deleted file mode 100644
index ee117c78e9..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/cpuinfo.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: DOS
-*
-* Description: MSDOS specific code for the CPU detection module.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* External timing function */
-
-void __ZTimerInit(void);
-
-/****************************************************************************
-REMARKS:
-Do nothing for DOS because we don't have thread priorities.
-****************************************************************************/
-#define SetMaxThreadPriority() 0
-
-/****************************************************************************
-REMARKS:
-Do nothing for DOS because we don't have thread priorities.
-****************************************************************************/
-#define RestoreThreadPriority(i) (void)(i)
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
- CPU_largeInteger *freq)
-{
- ulong resolution;
-
- __ZTimerInit();
- ULZTimerResolution(&resolution);
- freq->low = (ulong)(10000000000.0 / resolution);
- freq->high = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-****************************************************************************/
-#define GetCounter(t) \
-{ \
- (t)->low = ULZReadTime() * 10000L; \
- (t)->high = 0; \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/event.c b/board/MAI/bios_emulator/scitech/src/pm/dos/event.c
deleted file mode 100644
index a969d111b4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/event.c
+++ /dev/null
@@ -1,494 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit DOS
-*
-* Description: 32-bit DOS implementation for the SciTech cross platform
-* event library.
-*
-****************************************************************************/
-
-/*--------------------------- Global variables ----------------------------*/
-
-ibool _VARAPI _EVT_useEvents = true; /* True to use event handling */
-ibool _VARAPI _EVT_installed = 0; /* Event handers installed? */
-uchar _VARAPI *_EVT_biosPtr = NULL; /* Pointer to the BIOS data area */
-static ibool haveMouse = false; /* True if we have a mouse */
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* External assembler functions */
-
-void EVTAPI _EVT_pollJoystick(void);
-uint EVTAPI _EVT_disableInt(void);
-uint EVTAPI _EVT_restoreInt(uint flags);
-void EVTAPI _EVT_codeStart(void);
-void EVTAPI _EVT_codeEnd(void);
-void EVTAPI _EVT_cCodeStart(void);
-void EVTAPI _EVT_cCodeEnd(void);
-int EVTAPI _EVT_getKeyCode(void);
-void EVTAPI _EVT_pumpMessages(void);
-int EVTAPI EVT_rdinx(int port,int index);
-void EVTAPI EVT_wrinx(int port,int index,int value);
-
-#ifdef NO_KEYBOARD_INTERRUPT
-/****************************************************************************
-REMARKS:
-This function is used to pump all keyboard messages from the BIOS keyboard
-handler into our event queue. This can be used to avoid using the
-installable keyboard handler if this is causing problems.
-****************************************************************************/
-static void EVTAPI _EVT_pumpMessages(void)
-{
- RMREGS regs;
- uint key,ps;
-
- /* Since the keyboard ISR has not been installed if NO_IDE_BUG has
- * been defined, we first check for any pending keyboard events
- * here, and if there are some insert them into the event queue to
- * be picked up later - what a kludge.
- */
- while ((key = _EVT_getKeyCode()) != 0) {
- ps = _EVT_disableInt();
- addKeyEvent(EVT_KEYDOWN, key);
- _EVT_restoreInt(ps);
- }
-
- regs.x.ax = 0x0B; /* Reset Move Mouse */
- PM_int86(0x33,&regs,&regs);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-This function is used to return the number of ticks since system
-startup in milliseconds. This should be the same value that is placed into
-the time stamp fields of events, and is used to implement auto mouse down
-events.
-****************************************************************************/
-ulong _EVT_getTicks(void)
-{
- return (ulong)PM_getLong(_EVT_biosPtr+0x6C) * 55UL;
-}
-
-/****************************************************************************
-REMARKS:
-Reboots the machine from DOS (warm boot)
-****************************************************************************/
-static void Reboot(void)
-{
- PMREGS regs;
- PMSREGS sregs;
-
- ushort *rebootType = PM_mapRealPointer(0x40,0x72);
- *rebootType = 0x1234;
- PM_callRealMode(0xFFFF,0x0000,&regs,&sregs);
-}
-
-/****************************************************************************
-REMARKS:
-Include generic raw scancode keyboard module.
-****************************************************************************/
-#define SUPPORT_CTRL_ALT_DEL
-#include "common/keyboard.c"
-
-/****************************************************************************
-REMARKS:
-This function fools the DOS mouse driver into thinking that it is running
-in graphics mode, rather than text mode so we always get virtual coordinates
-correctly rather than character coordinates.
-****************************************************************************/
-int _EVT_foolMouse(void)
-{
- int oldmode = PM_getByte(_EVT_biosPtr+0x49);
- PM_setByte(_EVT_biosPtr+0x49,0x10);
- oldmode |= (EVT_rdinx(0x3C4,0x2) << 8);
- return oldmode;
-}
-
-/****************************************************************************
-REMARKS:
-This function unfools the DOS mouse driver after we have finished calling it.
-****************************************************************************/
-void _EVT_unfoolMouse(
- int oldmode)
-{
- PM_setByte(_EVT_biosPtr+0x49,oldmode);
-
- /* Some mouse drivers reset the plane mask register for VGA plane 4
- * modes, which screws up the display on some VGA compatible controllers
- * in SuperVGA modes. We reset the value back again in here to solve
- * the problem.
- */
- EVT_wrinx(0x3C4,0x2,oldmode >> 8);
-}
-
-/****************************************************************************
-REMARKS:
-Determines if we have a mouse attached and functioning.
-****************************************************************************/
-static ibool detectMouse(void)
-{
- RMREGS regs;
- RMSREGS sregs;
- uchar *p;
- ibool retval;
-
- regs.x.ax = 0x3533; /* Get interrupt vector 0x33 */
- PM_int86x(0x21,&regs,&regs,&sregs);
-
- /* Check that interrupt vector 0x33 is not a zero, and that the first
- * instruction in the interrupt vector is not an IRET instruction
- */
- p = PM_mapRealPointer(sregs.es, regs.x.bx);
- retval = ((sregs.es != 0) || (regs.x.bx != 0)) && (PM_getByte(p) != 207);
- return retval;
-}
-
-/****************************************************************************
-PARAMETERS:
-what - Event code
-message - Event message
-x,y - Mouse position at time of event
-but_stat - Mouse button status at time of event
-
-REMARKS:
-Adds a new mouse event to the event queue. This routine is called from within
-the mouse interrupt subroutine, so it must be efficient.
-
-NOTE: Interrupts MUST be OFF while this routine is called to ensure we have
- mutually exclusive access to our internal data structures for
- interrupt driven systems (like under DOS).
-****************************************************************************/
-static void addMouseEvent(
- uint what,
- uint message,
- int x,
- int y,
- int mickeyX,
- int mickeyY,
- uint but_stat)
-{
- event_t evt;
-
- if (EVT.count < EVENTQSIZE) {
- /* Save information in event record. */
- evt.when = _EVT_getTicks();
- evt.what = what;
- evt.message = message;
- evt.modifiers = but_stat;
- evt.where_x = x; /* Save mouse event position */
- evt.where_y = y;
- evt.relative_x = mickeyX;
- evt.relative_y = mickeyY;
- evt.modifiers |= EVT.keyModifiers;
- addEvent(&evt); /* Add to tail of event queue */
- }
-}
-
-/****************************************************************************
-PARAMETERS:
-mask - Event mask
-butstate - Button state
-x - Mouse x coordinate
-y - Mouse y coordinate
-
-REMARKS:
-Mouse event handling routine. This gets called when a mouse event occurs,
-and we call the addMouseEvent() routine to add the appropriate mouse event
-to the event queue.
-
-Note: Interrupts are ON when this routine is called by the mouse driver code.
-****************************************************************************/
-static void EVTAPI mouseISR(
- uint mask,
- uint butstate,
- int x,
- int y,
- int mickeyX,
- int mickeyY)
-{
- uint ps;
- uint buttonMask;
-
- if (mask & 1) {
- /* Save the current mouse coordinates */
- EVT.mx = x; EVT.my = y;
-
- /* If the last event was a movement event, then modify the last
- * event rather than post a new one, so that the queue will not
- * become saturated. Before we modify the data structures, we
- * MUST ensure that interrupts are off.
- */
- ps = _EVT_disableInt();
- if (EVT.oldMove != -1) {
- EVT.evtq[EVT.oldMove].where_x = x; /* Modify existing one */
- EVT.evtq[EVT.oldMove].where_y = y;
- EVT.evtq[EVT.oldMove].relative_x += mickeyX;
- EVT.evtq[EVT.oldMove].relative_y += mickeyY;
- }
- else {
- EVT.oldMove = EVT.freeHead; /* Save id of this move event */
- addMouseEvent(EVT_MOUSEMOVE,0,x,y,mickeyX,mickeyY,butstate);
- }
- _EVT_restoreInt(ps);
- }
- if (mask & 0x2A) {
- ps = _EVT_disableInt();
- buttonMask = 0;
- if (mask & 2) buttonMask |= EVT_LEFTBMASK;
- if (mask & 8) buttonMask |= EVT_RIGHTBMASK;
- if (mask & 32) buttonMask |= EVT_MIDDLEBMASK;
- addMouseEvent(EVT_MOUSEDOWN,buttonMask,x,y,0,0,butstate);
- EVT.oldMove = -1;
- _EVT_restoreInt(ps);
- }
- if (mask & 0x54) {
- ps = _EVT_disableInt();
- buttonMask = 0;
- if (mask & 2) buttonMask |= EVT_LEFTBMASK;
- if (mask & 8) buttonMask |= EVT_RIGHTBMASK;
- if (mask & 32) buttonMask |= EVT_MIDDLEBMASK;
- addMouseEvent(EVT_MOUSEUP,buttonMask,x,y,0,0,butstate);
- EVT.oldMove = -1;
- _EVT_restoreInt(ps);
- }
- EVT.oldKey = -1;
-}
-
-/****************************************************************************
-REMARKS:
-Keyboard interrupt handler function.
-
-NOTE: Interrupts are OFF when this routine is called by the keyboard ISR,
- and we leave them OFF the entire time.
-****************************************************************************/
-static void EVTAPI keyboardISR(void)
-{
- processRawScanCode(PM_inpb(0x60));
- PM_outpb(0x20,0x20);
-}
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort()
-{
- EVT_exit();
- PM_fatalError("Unhandled exception!");
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
- _EVT_mouseMoveHandler mouseMove)
-{
- int i;
-
- PM_init();
- EVT.mouseMove = mouseMove;
- _EVT_biosPtr = PM_getBIOSPointer();
- EVT_resume();
-
- /* Grab all characters pending in the keyboard buffer and stuff
- * them into our event buffer. This allows us to pick up any keypresses
- * while the program is initialising.
- */
- while ((i = _EVT_getKeyCode()) != 0)
- addKeyEvent(EVT_KEYDOWN,i);
-}
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVTAPI EVT_resume(void)
-{
- static int locked = 0;
- int stat;
- uchar mods;
- PM_lockHandle lh; /* Unused in DOS */
-
- if (_EVT_useEvents) {
- /* Initialise the event queue and enable our interrupt handlers */
- initEventQueue();
-#ifndef NO_KEYBOARD_INTERRUPT
- PM_setKeyHandler(keyboardISR);
-#endif
-#ifndef NO_MOUSE_INTERRUPT
- if ((haveMouse = detectMouse()) != 0) {
- int oldmode = _EVT_foolMouse();
- PM_setMouseHandler(0xFFFF,mouseISR);
- _EVT_unfoolMouse(oldmode);
- }
-#endif
-
- /* Read the keyboard modifier flags from the BIOS to get the
- * correct initialisation state. The only state we care about is
- * the correct toggle state flags such as SCROLLLOCK, NUMLOCK and
- * CAPSLOCK.
- */
- EVT.keyModifiers = 0;
- mods = PM_getByte(_EVT_biosPtr+0x17);
- if (mods & 0x10)
- EVT.keyModifiers |= EVT_SCROLLLOCK;
- if (mods & 0x20)
- EVT.keyModifiers |= EVT_NUMLOCK;
- if (mods & 0x40)
- EVT.keyModifiers |= EVT_CAPSLOCK;
-
- /* Lock all of the code and data used by our protected mode interrupt
- * handling routines, so that it will continue to work correctly
- * under real mode.
- */
- if (!locked) {
- /* It is difficult to ensure that we lock our global data, so we
- * do this by taking the address of a variable locking all data
- * 2Kb on either side. This should properly cover the global data
- * used by the module (the other alternative is to declare the
- * variables in assembler, in which case we know it will be
- * correct).
- */
- stat = !PM_lockDataPages(&EVT,sizeof(EVT),&lh);
- stat |= !PM_lockDataPages(&_EVT_biosPtr,sizeof(_EVT_biosPtr),&lh);
- stat |= !PM_lockCodePages((__codePtr)_EVT_cCodeStart,(int)_EVT_cCodeEnd-(int)_EVT_cCodeStart,&lh);
- stat |= !PM_lockCodePages((__codePtr)_EVT_codeStart,(int)_EVT_codeEnd-(int)_EVT_codeStart,&lh);
- if (stat) {
- PM_fatalError("Page locking services failed - interrupt handling not safe!");
- exit(1);
- }
- locked = 1;
- }
-
- /* Catch program termination signals so we can clean up properly */
- signal(SIGABRT, _EVT_abort);
- signal(SIGFPE, _EVT_abort);
- signal(SIGINT, _EVT_abort);
- _EVT_installed = true;
- }
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
- int xRes,
- int yRes)
-{
- RMREGS regs;
-
- if (haveMouse) {
- int oldmode = _EVT_foolMouse();
- PM_resetMouseDriver(1);
- regs.x.ax = 7; /* Mouse function 7 - Set horizontal min and max */
- regs.x.cx = 0;
- regs.x.dx = xRes;
- PM_int86(0x33,&regs,&regs);
- regs.x.ax = 8; /* Mouse function 8 - Set vertical min and max */
- regs.x.cx = 0;
- regs.x.dx = yRes;
- PM_int86(0x33,&regs,&regs);
- _EVT_unfoolMouse(oldmode);
- }
-}
-
-/****************************************************************************
-REMARKS
-Modifes the mouse coordinates as necessary if scaling to OS coordinates,
-and sets the OS mouse cursor position.
-****************************************************************************/
-void _EVT_setMousePos(
- int *x,
- int *y)
-{
- RMREGS regs;
-
- if (haveMouse) {
- int oldmode = _EVT_foolMouse();
- regs.x.ax = 4; /* Mouse function 4 - Set mouse position */
- regs.x.cx = *x; /* New horizontal coordinate */
- regs.x.dx = *y; /* New vertical coordinate */
- PM_int86(0x33,&regs,&regs);
- _EVT_unfoolMouse(oldmode);
- }
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVTAPI EVT_suspend(void)
-{
- uchar mods;
-
- if (_EVT_installed) {
- /* Restore the interrupt handlers */
- PM_restoreKeyHandler();
- if (haveMouse)
- PM_restoreMouseHandler();
- signal(SIGABRT, SIG_DFL);
- signal(SIGFPE, SIG_DFL);
- signal(SIGINT, SIG_DFL);
-
- /* Set the keyboard modifier flags in the BIOS to our values */
- EVT_allowLEDS(true);
- mods = PM_getByte(_EVT_biosPtr+0x17) & ~0x70;
- if (EVT.keyModifiers & EVT_SCROLLLOCK)
- mods |= 0x10;
- if (EVT.keyModifiers & EVT_NUMLOCK)
- mods |= 0x20;
- if (EVT.keyModifiers & EVT_CAPSLOCK)
- mods |= 0x40;
- PM_setByte(_EVT_biosPtr+0x17,mods);
-
- /* Flag that we are no longer installed */
- _EVT_installed = false;
- }
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVTAPI EVT_exit(void)
-{
- EVT_suspend();
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/dos/oshdr.h
deleted file mode 100644
index 35e8e00f72..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/oshdr.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit DOS
-*
-* Description: Include file to include all OS specific header files.
-*
-****************************************************************************/
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/pm.c b/board/MAI/bios_emulator/scitech/src/pm/dos/pm.c
deleted file mode 100644
index 2ad9e34f91..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/pm.c
+++ /dev/null
@@ -1,2243 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 16/32 bit DOS
-*
-* Description: Implementation for the OS Portability Manager Library, which
-* contains functions to implement OS specific services in a
-* generic, cross platform API. Porting the OS Portability
-* Manager library is the first step to porting any SciTech
-* products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "ztimerc.h"
-#include "mtrr.h"
-#include "pm_help.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <dos.h>
-#include <conio.h>
-#ifdef __GNUC__
-#include <unistd.h>
-#include <sys/nearptr.h>
-#include <sys/stat.h>
-#else
-#include <direct.h>
-#endif
-#ifdef __BORLANDC__
-#pragma warn -par
-#endif
-
-/*--------------------------- Global variables ----------------------------*/
-
-typedef struct {
- int oldMode;
- int old50Lines;
- } DOS_stateBuf;
-
-#define MAX_RM_BLOCKS 10
-
-static struct {
- void *p;
- uint tag;
- } rmBlocks[MAX_RM_BLOCKS];
-
-static uint VESABuf_len = 1024; /* Length of the VESABuf buffer */
-static void *VESABuf_ptr = NULL; /* Near pointer to VESABuf */
-static uint VESABuf_rseg; /* Real mode segment of VESABuf */
-static uint VESABuf_roff; /* Real mode offset of VESABuf */
-static void (PMAPIP fatalErrorCleanup)(void) = NULL;
-ushort _VARAPI _PM_savedDS = 0;
-#ifdef DOS4GW
-static ulong PDB = 0,*pPDB = NULL;
-#endif
-#ifndef REALMODE
-static char VXD_name[] = PMHELP_NAME;
-static char VXD_module[] = PMHELP_MODULE;
-static char VXD_DDBName[] = PMHELP_DDBNAME;
-static uint VXD_version = -1;
-static uint VXD_loadOff = 0;
-static uint VXD_loadSel = 0;
-uint _VARAPI _PM_VXD_off = 0;
-uint _VARAPI _PM_VXD_sel = 0;
-int _VARAPI _PM_haveCauseWay = -1;
-
-/* Memory mapping cache */
-
-#define MAX_MEMORY_MAPPINGS 100
-typedef struct {
- ulong physical;
- ulong linear;
- ulong limit;
- } mmapping;
-static mmapping maps[MAX_MEMORY_MAPPINGS] = {0};
-static int numMaps = 0;
-
-/* Page sized block cache */
-
-#define PAGES_PER_BLOCK 100
-#define FREELIST_NEXT(p) (*(void**)(p))
-typedef struct pageblock {
- struct pageblock *next;
- struct pageblock *prev;
- void *freeListStart;
- void *freeList;
- void *freeListEnd;
- int freeCount;
- } pageblock;
-static pageblock *pageBlocks = NULL;
-#endif
-
-/* Start of all page tables in CauseWay */
-
-#define CW_PAGE_TABLE_START (1024UL*4096UL*1023UL)
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* External assembler functions */
-
-ulong _ASMAPI _PM_getPDB(void);
-int _ASMAPI _PM_pagingEnabled(void);
-void _ASMAPI _PM_VxDCall(VXD_regs *regs,uint off,uint sel);
-
-#ifndef REALMODE
-/****************************************************************************
-REMARKS:
-Exit function to unload the dynamically loaded VxD
-****************************************************************************/
-static void UnloadVxD(void)
-{
- PMSREGS sregs;
- VXD_regs r;
-
- r.eax = 2;
- r.ebx = 0;
- r.edx = (uint)VXD_module;
- PM_segread(&sregs);
-#ifdef __16BIT__
- r.ds = ((ulong)VXD_module) >> 16;
-#else
- r.ds = sregs.ds;
-#endif
- r.es = sregs.es;
- _PM_VxDCall(&r,VXD_loadOff,VXD_loadSel);
-}
-
-/****************************************************************************
-REMARKS:
-External function to call the PMHELP helper VxD.
-****************************************************************************/
-void PMAPI PM_VxDCall(
- VXD_regs *regs)
-{
- if (_PM_VXD_sel != 0 || _PM_VXD_off != 0)
- _PM_VxDCall(regs,_PM_VXD_off,_PM_VXD_sel);
-}
-
-/****************************************************************************
-RETURNS:
-BCD coded version number of the VxD, or 0 if not loaded (ie: 0x202 - 2.2)
-
-REMARKS:
-This function gets the version number for the VxD that we have connected to.
-****************************************************************************/
-uint PMAPI PMHELP_getVersion(void)
-{
- VXD_regs r;
-
- /* Call the helper VxD to determine the version number */
- if (_PM_VXD_sel != 0 || _PM_VXD_off != 0) {
- memset(&r,0,sizeof(r));
- r.eax = API_NUM(PMHELP_GETVER);
- _PM_VxDCall(&r,_PM_VXD_off,_PM_VXD_sel);
- return VXD_version = (uint)r.eax;
- }
- return VXD_version = 0;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Connects to the helper VxD and returns the version number
-
-RETURNS:
-True if the VxD was found and loaded, false otherwise.
-
-REMARKS:
-This function connects to the VxD (loading it if it is dynamically loadable)
-and returns the version number of the VxD.
-****************************************************************************/
-static ibool PMHELP_connect(void)
-{
- PMREGS regs;
- PMSREGS sregs;
- VXD_regs r;
-
- /* Bail early if we have alread connected */
- if (VXD_version != -1)
- return VXD_version != 0;
-
- /* Get the static SDDHELP.VXD entry point if available */
- PM_segread(&sregs);
- regs.x.ax = 0x1684;
- regs.x.bx = SDDHELP_DeviceID;
- regs.x.di = 0;
- sregs.es = 0;
- PM_int386x(0x2F,&regs,&regs,&sregs);
- _PM_VXD_sel = sregs.es;
- _PM_VXD_off = regs.x.di;
- if (_PM_VXD_sel != 0 || _PM_VXD_off != 0) {
- if (PMHELP_getVersion() >= PMHELP_VERSION)
- return true;
- }
-
- /* If we get here, then either SDDHELP.VXD is not loaded, or it is an
- * earlier version. In this case try to dynamically load the PMHELP.VXD
- * helper VxD instead.
- */
- PM_segread(&sregs);
- regs.x.ax = 0x1684;
- regs.x.bx = VXDLDR_DeviceID;
- regs.x.di = 0;
- sregs.es = 0;
- PM_int386x(0x2F,&regs,&regs,&sregs);
- VXD_loadSel = sregs.es;
- VXD_loadOff = regs.x.di;
- if (VXD_loadSel == 0 && VXD_loadOff == 0)
- return VXD_version = 0;
- r.eax = 1;
- r.ebx = 0;
- r.edx = (uint)VXD_name;
- PM_segread(&sregs);
- r.ds = sregs.ds;
- r.es = sregs.es;
- _PM_VxDCall(&r,VXD_loadOff,VXD_loadSel);
- if (r.eax != 0)
- return VXD_version = 0;
-
- /* Get the dynamic VxD entry point so we can call it */
- atexit(UnloadVxD);
- PM_segread(&sregs);
- regs.x.ax = 0x1684;
- regs.x.bx = 0;
- regs.e.edi = (uint)VXD_DDBName;
- PM_int386x(0x2F,&regs,&regs,&sregs);
- _PM_VXD_sel = sregs.es;
- _PM_VXD_off = regs.x.di;
- if (_PM_VXD_sel == 0 && _PM_VXD_off == 0)
- return VXD_version = 0;
- if (PMHELP_getVersion() >= PMHELP_VERSION)
- return true;
- return VXD_version = 0;
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-Initialise the PM library. First we try to connect to a static SDDHELP.VXD
-helper VxD, and check that it is a version we can use. If not we try to
-dynamically load the PMHELP.VXD helper VxD
-****************************************************************************/
-void PMAPI PM_init(void)
-{
-#ifndef REALMODE
- PMREGS regs;
-
- /* Check if we are running under CauseWay under real DOS */
- if (_PM_haveCauseWay == -1) {
- /* Check if we are running under DPMI in which case we will not be
- * able to use our special ring 0 CauseWay functions.
- */
- _PM_haveCauseWay = false;
- regs.x.ax = 0xFF00;
- PM_int386(0x31,&regs,&regs);
- if (regs.x.cflag || !(regs.e.edi & 8)) {
- /* We are not under DPMI, so now check if CauseWay is active */
- regs.x.ax = 0xFFF9;
- PM_int386(0x31,&regs,&regs);
- if (!regs.x.cflag && regs.e.ecx == 0x43415553 && regs.e.edx == 0x45574159)
- _PM_haveCauseWay = true;
- }
-
- /* Now connect to PMHELP.VXD and initialise MTRR module */
- if (!PMHELP_connect())
- MTRR_init();
- }
-#endif
-}
-
-/****************************************************************************
-PARAMETERS:
-base - The starting physical base address of the region
-size - The size in bytes of the region
-type - Type to place into the MTRR register
-
-RETURNS:
-Error code describing the result.
-
-REMARKS:
-Function to enable write combining for the specified region of memory.
-****************************************************************************/
-int PMAPI PM_enableWriteCombine(
- ulong base,
- ulong size,
- uint type)
-{
-#ifndef REALMODE
- VXD_regs regs;
-
- if (PMHELP_connect()) {
- memset(&regs,0,sizeof(regs));
- regs.eax = API_NUM(PMHELP_ENABLELFBCOMB);
- regs.ebx = base;
- regs.ecx = size;
- regs.edx = type;
- _PM_VxDCall(&regs,_PM_VXD_off,_PM_VXD_sel);
- return regs.eax;
- }
- return MTRR_enableWriteCombine(base,size,type);
-#else
- return PM_MTRR_NOT_SUPPORTED;
-#endif
-}
-
-ibool PMAPI PM_haveBIOSAccess(void)
-{ return true; }
-
-long PMAPI PM_getOSType(void)
-{ return _OS_DOS; }
-
-int PMAPI PM_getModeType(void)
-{
-#if defined(REALMODE)
- return PM_realMode;
-#elif defined(PM286)
- return PM_286;
-#elif defined(PM386)
- return PM_386;
-#endif
-}
-
-void PMAPI PM_backslash(char *s)
-{
- uint pos = strlen(s);
- if (s[pos-1] != '\\') {
- s[pos] = '\\';
- s[pos+1] = '\0';
- }
-}
-
-void PMAPI PM_setFatalErrorCleanup(
- void (PMAPIP cleanup)(void))
-{
- fatalErrorCleanup = cleanup;
-}
-
-void PMAPI PM_fatalError(const char *msg)
-{
- if (fatalErrorCleanup)
- fatalErrorCleanup();
- fprintf(stderr,"%s\n", msg);
- exit(1);
-}
-
-static void ExitVBEBuf(void)
-{
- if (VESABuf_ptr)
- PM_freeRealSeg(VESABuf_ptr);
- VESABuf_ptr = 0;
-}
-
-void * PMAPI PM_getVESABuf(uint *len,uint *rseg,uint *roff)
-{
- if (!VESABuf_ptr) {
- /* Allocate a global buffer for communicating with the VESA VBE */
- if ((VESABuf_ptr = PM_allocRealSeg(VESABuf_len, &VESABuf_rseg, &VESABuf_roff)) == NULL)
- return NULL;
- atexit(ExitVBEBuf);
- }
- *len = VESABuf_len;
- *rseg = VESABuf_rseg;
- *roff = VESABuf_roff;
- return VESABuf_ptr;
-}
-
-int PMAPI PM_int386(int intno, PMREGS *in, PMREGS *out)
-{
- PMSREGS sregs;
- PM_segread(&sregs);
- return PM_int386x(intno,in,out,&sregs);
-}
-
-/* Routines to set and get the real mode interrupt vectors, by making
- * direct real mode calls to DOS and bypassing the DOS extenders API.
- * This is the safest way to handle this, as some servers try to be
- * smart about changing real mode vectors.
- */
-
-void PMAPI _PM_getRMvect(int intno, long *realisr)
-{
- RMREGS regs;
- RMSREGS sregs;
-
- PM_saveDS();
- regs.h.ah = 0x35;
- regs.h.al = intno;
- PM_int86x(0x21, &regs, &regs, &sregs);
- *realisr = ((long)sregs.es << 16) | regs.x.bx;
-}
-
-void PMAPI _PM_setRMvect(int intno, long realisr)
-{
- RMREGS regs;
- RMSREGS sregs;
-
- PM_saveDS();
- regs.h.ah = 0x25;
- regs.h.al = intno;
- sregs.ds = (int)(realisr >> 16);
- regs.x.dx = (int)(realisr & 0xFFFF);
- PM_int86x(0x21, &regs, &regs, &sregs);
-}
-
-void PMAPI _PM_addRealModeBlock(void *mem,uint tag)
-{
- int i;
-
- for (i = 0; i < MAX_RM_BLOCKS; i++) {
- if (rmBlocks[i].p == NULL) {
- rmBlocks[i].p = mem;
- rmBlocks[i].tag = tag;
- return;
- }
- }
- PM_fatalError("To many real mode memory block allocations!");
-}
-
-uint PMAPI _PM_findRealModeBlock(void *mem)
-{
- int i;
-
- for (i = 0; i < MAX_RM_BLOCKS; i++) {
- if (rmBlocks[i].p == mem)
- return rmBlocks[i].tag;
- }
- PM_fatalError("Could not find prior real mode memory block allocation!");
- return 0;
-}
-
-char * PMAPI PM_getCurrentPath(
- char *path,
- int maxLen)
-{
- return getcwd(path,maxLen);
-}
-
-char PMAPI PM_getBootDrive(void)
-{ return 'C'; }
-
-const char * PMAPI PM_getVBEAFPath(void)
-{ return "c:\\"; }
-
-const char * PMAPI PM_getNucleusPath(void)
-{
- static char path[256];
- char *env;
-
- if ((env = getenv("NUCLEUS_PATH")) != NULL)
- return env;
- if ((env = getenv("WINBOOTDIR")) != NULL) {
- /* Running in a Windows 9x DOS box or DOS mode */
- strcpy(path,env);
- strcat(path,"\\system\\nucleus");
- return path;
- }
- if ((env = getenv("SystemRoot")) != NULL) {
- /* Running in an NT/2K DOS box */
- strcpy(path,env);
- strcat(path,"\\system32\\nucleus");
- return path;
- }
- return "c:\\nucleus";
-}
-
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
- static char path[256];
- strcpy(path,PM_getNucleusPath());
- PM_backslash(path);
- strcat(path,"config");
- return path;
-}
-
-const char * PMAPI PM_getUniqueID(void)
-{ return "DOS"; }
-
-const char * PMAPI PM_getMachineName(void)
-{ return "DOS"; }
-
-int PMAPI PM_kbhit(void)
-{
- return kbhit();
-}
-
-int PMAPI PM_getch(void)
-{
- return getch();
-}
-
-PM_HWND PMAPI PM_openConsole(PM_HWND hwndUser,int device,int xRes,int yRes,int bpp,ibool fullScreen)
-{
- /* Not used for DOS */
- (void)hwndUser;
- (void)device;
- (void)xRes;
- (void)yRes;
- (void)bpp;
- (void)fullScreen;
- return 0;
-}
-
-int PMAPI PM_getConsoleStateSize(void)
-{
- return sizeof(DOS_stateBuf);
-}
-
-void PMAPI PM_saveConsoleState(void *stateBuf,PM_HWND hwndConsole)
-{
- RMREGS regs;
- DOS_stateBuf *sb = stateBuf;
-
- /* Save the old video mode state */
- regs.h.ah = 0x0F;
- PM_int86(0x10,&regs,&regs);
- sb->oldMode = regs.h.al & 0x7F;
- sb->old50Lines = false;
- if (sb->oldMode == 0x3) {
- regs.x.ax = 0x1130;
- regs.x.bx = 0;
- regs.x.dx = 0;
- PM_int86(0x10,&regs,&regs);
- sb->old50Lines = (regs.h.dl == 42 || regs.h.dl == 49);
- }
- (void)hwndConsole;
-}
-
-void PMAPI PM_setSuspendAppCallback(int (_ASMAPIP saveState)(int flags))
-{
- /* Not used for DOS */
- (void)saveState;
-}
-
-void PMAPI PM_restoreConsoleState(const void *stateBuf,PM_HWND hwndConsole)
-{
- RMREGS regs;
- const DOS_stateBuf *sb = stateBuf;
-
- /* Retore 50 line mode if set */
- if (sb->old50Lines) {
- regs.x.ax = 0x1112;
- regs.x.bx = 0;
- PM_int86(0x10,&regs,&regs);
- }
- (void)hwndConsole;
-}
-
-void PMAPI PM_closeConsole(PM_HWND hwndConsole)
-{
- /* Not used for DOS */
- (void)hwndConsole;
-}
-
-void PMAPI PM_setOSCursorLocation(int x,int y)
-{
- uchar *_biosPtr = PM_getBIOSPointer();
- PM_setByte(_biosPtr+0x50,x);
- PM_setByte(_biosPtr+0x51,y);
-}
-
-void PMAPI PM_setOSScreenWidth(int width,int height)
-{
- uchar *_biosPtr = PM_getBIOSPointer();
- PM_setWord(_biosPtr+0x4A,width);
- PM_setWord(_biosPtr+0x4C,width*2);
- PM_setByte(_biosPtr+0x84,height-1);
- if (height > 25) {
- PM_setWord(_biosPtr+0x60,0x0607);
- PM_setByte(_biosPtr+0x85,0x08);
- }
- else {
- PM_setWord(_biosPtr+0x60,0x0D0E);
- PM_setByte(_biosPtr+0x85,0x016);
- }
-}
-
-void * PMAPI PM_mallocShared(long size)
-{
- return PM_malloc(size);
-}
-
-void PMAPI PM_freeShared(void *ptr)
-{
- PM_free(ptr);
-}
-
-#define GetRMVect(intno,isr) *(isr) = ((ulong*)rmZeroPtr)[intno]
-#define SetRMVect(intno,isr) ((ulong*)rmZeroPtr)[intno] = (isr)
-
-ibool PMAPI PM_doBIOSPOST(
- ushort axVal,
- ulong BIOSPhysAddr,
- void *mappedBIOS,
- ulong BIOSLen)
-{
- static int firstTime = true;
- static uchar *rmZeroPtr;
- long Current10,Current6D,Current42;
- RMREGS regs;
- RMSREGS sregs;
-
- /* Create a zero memory mapping for us to use */
- if (firstTime) {
- rmZeroPtr = PM_mapPhysicalAddr(0,0x7FFF,true);
- firstTime = false;
- }
-
- /* Remap the secondary BIOS to 0xC0000 physical */
- if (BIOSPhysAddr != 0xC0000L || BIOSLen > 32768) {
- /* DOS cannot virtually remap the BIOS, so we can only work if all
- * the secondary controllers are identical, and we then use the
- * BIOS on the first controller for all the remaining controllers.
- *
- * For OS'es that do virtual memory, and remapping of 0xC0000
- * physical (perhaps a copy on write mapping) should be all that
- * is needed.
- */
- return false;
- }
-
- /* Save current handlers of int 10h and 6Dh */
- GetRMVect(0x10,&Current10);
- GetRMVect(0x6D,&Current6D);
-
- /* POST the secondary BIOS */
- GetRMVect(0x42,&Current42);
- SetRMVect(0x10,Current42); /* Restore int 10h to STD-BIOS */
- regs.x.ax = axVal;
- PM_callRealMode(0xC000,0x0003,&regs,&sregs);
-
- /* Restore current handlers */
- SetRMVect(0x10,Current10);
- SetRMVect(0x6D,Current6D);
-
- /* Second the primary BIOS mappin 1:1 for 0xC0000 physical */
- if (BIOSPhysAddr != 0xC0000L) {
- /* DOS does not support this */
- (void)mappedBIOS;
- }
- return true;
-}
-
-void PMAPI PM_sleep(ulong milliseconds)
-{
- ulong microseconds = milliseconds * 1000L;
- LZTimerObject tm;
-
- LZTimerOnExt(&tm);
- while (LZTimerLapExt(&tm) < microseconds)
- ;
- LZTimerOffExt(&tm);
-}
-
-int PMAPI PM_getCOMPort(int port)
-{
- switch (port) {
- case 0: return 0x3F8;
- case 1: return 0x2F8;
- }
- return 0;
-}
-
-int PMAPI PM_getLPTPort(int port)
-{
- switch (port) {
- case 0: return 0x3BC;
- case 1: return 0x378;
- case 2: return 0x278;
- }
- return 0;
-}
-
-PM_MODULE PMAPI PM_loadLibrary(
- const char *szDLLName)
-{
- (void)szDLLName;
- return NULL;
-}
-
-void * PMAPI PM_getProcAddress(
- PM_MODULE hModule,
- const char *szProcName)
-{
- (void)hModule;
- (void)szProcName;
- return NULL;
-}
-
-void PMAPI PM_freeLibrary(
- PM_MODULE hModule)
-{
- (void)hModule;
-}
-
-int PMAPI PM_setIOPL(
- int level)
-{
- return level;
-}
-
-/****************************************************************************
-REMARKS:
-Internal function to convert the find data to the generic interface.
-****************************************************************************/
-static void convertFindData(
- PM_findData *findData,
- struct find_t *blk)
-{
- ulong dwSize = findData->dwSize;
-
- memset(findData,0,findData->dwSize);
- findData->dwSize = dwSize;
- if (blk->attrib & _A_RDONLY)
- findData->attrib |= PM_FILE_READONLY;
- if (blk->attrib & _A_SUBDIR)
- findData->attrib |= PM_FILE_DIRECTORY;
- if (blk->attrib & _A_ARCH)
- findData->attrib |= PM_FILE_ARCHIVE;
- if (blk->attrib & _A_HIDDEN)
- findData->attrib |= PM_FILE_HIDDEN;
- if (blk->attrib & _A_SYSTEM)
- findData->attrib |= PM_FILE_SYSTEM;
- findData->sizeLo = blk->size;
- strncpy(findData->name,blk->name,PM_MAX_PATH);
- findData->name[PM_MAX_PATH-1] = 0;
-}
-
-#define FIND_MASK (_A_RDONLY | _A_ARCH | _A_SUBDIR | _A_HIDDEN | _A_SYSTEM)
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-void * PMAPI PM_findFirstFile(
- const char *filename,
- PM_findData *findData)
-{
- struct find_t *blk;
-
- if ((blk = PM_malloc(sizeof(*blk))) == NULL)
- return PM_FILE_INVALID;
- if (_dos_findfirst((char*)filename,FIND_MASK,blk) == 0) {
- convertFindData(findData,blk);
- return blk;
- }
- return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
- void *handle,
- PM_findData *findData)
-{
- struct find_t *blk = handle;
-
- if (_dos_findnext(blk) == 0) {
- convertFindData(findData,blk);
- return true;
- }
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
- void *handle)
-{
- PM_free(handle);
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
- 1 - Drive A:
- 2 - Drive B:
- 3 - Drive C:
- etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
- char drive)
-{
- RMREGS regs;
- regs.h.dl = (uchar)(drive - 'A' + 1);
- regs.h.ah = 0x36; /* Get disk information service */
- PM_int86(0x21,&regs,&regs);
- return regs.x.ax != 0xFFFF; /* AX = 0xFFFF if disk is invalid */
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
- int drive,
- char *dir,
- int len)
-{
- uint oldDrive,maxDrives;
- _dos_getdrive(&oldDrive);
- _dos_setdrive(drive,&maxDrives);
- getcwd(dir,len);
- _dos_setdrive(oldDrive,&maxDrives);
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
- const char *filename,
- uint attrib)
-{
-#if defined(TNT) && defined(_MSC_VER)
- DWORD attr = 0;
-
- if (attrib & PM_FILE_READONLY)
- attr |= FILE_ATTRIBUTE_READONLY;
- if (attrib & PM_FILE_ARCHIVE)
- attr |= FILE_ATTRIBUTE_ARCHIVE;
- if (attrib & PM_FILE_HIDDEN)
- attr |= FILE_ATTRIBUTE_HIDDEN;
- if (attrib & PM_FILE_SYSTEM)
- attr |= FILE_ATTRIBUTE_SYSTEM;
- SetFileAttributes((LPSTR)filename, attr);
-#else
- uint attr = 0;
-
- if (attrib & PM_FILE_READONLY)
- attr |= _A_RDONLY;
- if (attrib & PM_FILE_ARCHIVE)
- attr |= _A_ARCH;
- if (attrib & PM_FILE_HIDDEN)
- attr |= _A_HIDDEN;
- if (attrib & PM_FILE_SYSTEM)
- attr |= _A_SYSTEM;
- _dos_setfileattr(filename,attr);
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Function to create a directory.
-****************************************************************************/
-ibool PMAPI PM_mkdir(
- const char *filename)
-{
-#ifdef __GNUC__
- return mkdir(filename,S_IRUSR) == 0;
-#else
- return mkdir(filename) == 0;
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Function to remove a directory.
-****************************************************************************/
-ibool PMAPI PM_rmdir(
- const char *filename)
-{
- return rmdir(filename) == 0;
-}
-
-/*-------------------------------------------------------------------------*/
-/* Generic DPMI routines common to 16/32 bit code */
-/*-------------------------------------------------------------------------*/
-
-#ifndef REALMODE
-ulong PMAPI DPMI_mapPhysicalToLinear(ulong physAddr,ulong limit)
-{
- PMREGS r;
- int i;
- ulong baseAddr,baseOfs,roundedLimit;
-
- /* We can't map memory below 1Mb, but the linear address are already
- * mapped 1:1 for this memory anyway so we just return the base address.
- */
- if (physAddr < 0x100000L)
- return physAddr;
-
- /* Search table of existing mappings to see if we have already mapped
- * a region of memory that will serve this purpose. We do this because
- * DPMI 0.9 does not allow us to free physical memory mappings, and if
- * the mappings get re-used in the program we want to avoid allocating
- * more mappings than necessary.
- */
- for (i = 0; i < numMaps; i++) {
- if (maps[i].physical == physAddr && maps[i].limit == limit)
- return maps[i].linear;
- }
-
- /* Find a free slot in our physical memory mapping table */
- for (i = 0; i < numMaps; i++) {
- if (maps[i].limit == 0)
- break;
- }
- if (i == numMaps) {
- i = numMaps++;
- if (i == MAX_MEMORY_MAPPINGS)
- return NULL;
- }
-
- /* Round the physical address to a 4Kb boundary and the limit to a
- * 4Kb-1 boundary before passing the values to DPMI as some extenders
- * will fail the calls unless this is the case. If we round the
- * physical address, then we also add an extra offset into the address
- * that we return.
- */
- baseOfs = physAddr & 4095;
- baseAddr = physAddr & ~4095;
- roundedLimit = ((limit+baseOfs+1+4095) & ~4095)-1;
- r.x.ax = 0x800;
- r.x.bx = baseAddr >> 16;
- r.x.cx = baseAddr & 0xFFFF;
- r.x.si = roundedLimit >> 16;
- r.x.di = roundedLimit & 0xFFFF;
- PM_int386(0x31, &r, &r);
- if (r.x.cflag)
- return 0xFFFFFFFFUL;
- maps[i].physical = physAddr;
- maps[i].limit = limit;
- maps[i].linear = ((ulong)r.x.bx << 16) + r.x.cx + baseOfs;
- return maps[i].linear;
-}
-
-int PMAPI DPMI_setSelectorBase(ushort sel,ulong linAddr)
-{
- PMREGS r;
-
- r.x.ax = 7; /* DPMI set selector base address */
- r.x.bx = sel;
- r.x.cx = linAddr >> 16;
- r.x.dx = linAddr & 0xFFFF;
- PM_int386(0x31, &r, &r);
- if (r.x.cflag)
- return 0;
- return 1;
-}
-
-ulong PMAPI DPMI_getSelectorBase(ushort sel)
-{
- PMREGS r;
-
- r.x.ax = 6; /* DPMI get selector base address */
- r.x.bx = sel;
- PM_int386(0x31, &r, &r);
- return ((ulong)r.x.cx << 16) + r.x.dx;
-}
-
-int PMAPI DPMI_setSelectorLimit(ushort sel,ulong limit)
-{
- PMREGS r;
-
- r.x.ax = 8; /* DPMI set selector limit */
- r.x.bx = sel;
- r.x.cx = limit >> 16;
- r.x.dx = limit & 0xFFFF;
- PM_int386(0x31, &r, &r);
- if (r.x.cflag)
- return 0;
- return 1;
-}
-
-uint PMAPI DPMI_createSelector(ulong base,ulong limit)
-{
- uint sel;
- PMREGS r;
-
- /* Allocate 1 descriptor */
- r.x.ax = 0;
- r.x.cx = 1;
- PM_int386(0x31, &r, &r);
- if (r.x.cflag) return 0;
- sel = r.x.ax;
-
- /* Set the descriptor access rights (for a 32 bit page granular
- * segment).
- */
- if (limit >= 0x10000L) {
- r.x.ax = 9;
- r.x.bx = sel;
- r.x.cx = 0x40F3;
- PM_int386(0x31, &r, &r);
- }
-
- /* Map physical memory and create selector */
- if ((base = DPMI_mapPhysicalToLinear(base,limit)) == 0xFFFFFFFFUL)
- return 0;
- if (!DPMI_setSelectorBase(sel,base))
- return 0;
- if (!DPMI_setSelectorLimit(sel,limit))
- return 0;
- return sel;
-}
-
-void PMAPI DPMI_freeSelector(uint sel)
-{
- PMREGS r;
-
- r.x.ax = 1;
- r.x.bx = sel;
- PM_int386(0x31, &r, &r);
-}
-
-int PMAPI DPMI_lockLinearPages(ulong linear,ulong len)
-{
- PMREGS r;
-
- r.x.ax = 0x600; /* DPMI Lock Linear Region */
- r.x.bx = (linear >> 16); /* Linear address in BX:CX */
- r.x.cx = (linear & 0xFFFF);
- r.x.si = (len >> 16); /* Length in SI:DI */
- r.x.di = (len & 0xFFFF);
- PM_int386(0x31, &r, &r);
- return (!r.x.cflag);
-}
-
-int PMAPI DPMI_unlockLinearPages(ulong linear,ulong len)
-{
- PMREGS r;
-
- r.x.ax = 0x601; /* DPMI Unlock Linear Region */
- r.x.bx = (linear >> 16); /* Linear address in BX:CX */
- r.x.cx = (linear & 0xFFFF);
- r.x.si = (len >> 16); /* Length in SI:DI */
- r.x.di = (len & 0xFFFF);
- PM_int386(0x31, &r, &r);
- return (!r.x.cflag);
-}
-
-/****************************************************************************
-REMARKS:
-Adjust the page table caching bits directly. Requires ring 0 access and
-only works with DOS4GW and compatible extenders (CauseWay also works since
-it has direct support for the ring 0 instructions we need from ring 3). Will
-not work in a DOS box, but we call into the ring 0 helper VxD so we should
-never get here in a DOS box anyway (assuming the VxD is present). If we
-do get here and we are in windows, this code will be skipped.
-****************************************************************************/
-static void PM_adjustPageTables(
- ulong linear,
- ulong limit,
- ibool isCached)
-{
-#ifdef DOS4GW
- int startPDB,endPDB,iPDB,startPage,endPage,start,end,iPage;
- ulong andMask,orMask,pageTable,*pPageTable;
-
- andMask = ~0x18;
- orMask = (isCached) ? 0x00 : 0x18;
- if (_PM_pagingEnabled() == 1 && (PDB = _PM_getPDB()) != 0) {
- if (_PM_haveCauseWay) {
- /* CauseWay is a little different in the page table handling.
- * The code that we use for DOS4G/W does not appear to work
- * with CauseWay correctly as it does not appear to allow us
- * to map the page tables directly. Instead we can directly
- * access the page table entries in extended memory where
- * CauseWay always locates them (starting at 1024*4096*1023)
- */
- startPage = (linear >> 12);
- endPage = ((linear+limit) >> 12);
- pPageTable = (ulong*)CW_PAGE_TABLE_START;
- for (iPage = startPage; iPage <= endPage; iPage++)
- pPageTable[iPage] = (pPageTable[iPage] & andMask) | orMask;
- }
- else {
- pPDB = (ulong*)DPMI_mapPhysicalToLinear(PDB,0xFFF);
- if (pPDB) {
- startPDB = (linear >> 22) & 0x3FF;
- startPage = (linear >> 12) & 0x3FF;
- endPDB = ((linear+limit) >> 22) & 0x3FF;
- endPage = ((linear+limit) >> 12) & 0x3FF;
- for (iPDB = startPDB; iPDB <= endPDB; iPDB++) {
- pageTable = pPDB[iPDB] & ~0xFFF;
- pPageTable = (ulong*)DPMI_mapPhysicalToLinear(pageTable,0xFFF);
- start = (iPDB == startPDB) ? startPage : 0;
- end = (iPDB == endPDB) ? endPage : 0x3FF;
- for (iPage = start; iPage <= end; iPage++)
- pPageTable[iPage] = (pPageTable[iPage] & andMask) | orMask;
- }
- }
- }
- PM_flushTLB();
- }
-#endif
-}
-
-void * PMAPI DPMI_mapPhysicalAddr(ulong base,ulong limit,ibool isCached)
-{
- PMSREGS sregs;
- ulong linAddr;
- ulong DSBaseAddr;
-
- /* Get the base address for the default DS selector */
- PM_segread(&sregs);
- DSBaseAddr = DPMI_getSelectorBase(sregs.ds);
- if ((base < 0x100000) && (DSBaseAddr == 0)) {
- /* DS is zero based, so we can directly access the first 1Mb of
- * system memory (like under DOS4GW).
- */
- return (void*)base;
- }
-
- /* Map the memory to a linear address using DPMI function 0x800 */
- if ((linAddr = DPMI_mapPhysicalToLinear(base,limit)) == 0xFFFFFFFF) {
- if (base >= 0x100000)
- return NULL;
- /* If the linear address mapping fails but we are trying to
- * map an area in the first 1Mb of system memory, then we must
- * be running under a Windows or OS/2 DOS box. Under these
- * environments we can use the segment wrap around as a fallback
- * measure, as this does work properly.
- */
- linAddr = base;
- }
-
- /* Now expand the default DS selector to 4Gb so we can access it */
- if (!DPMI_setSelectorLimit(sregs.ds,0xFFFFFFFFUL))
- return NULL;
-
- /* Finally enable caching for the page tables that we just mapped in,
- * since DOS4GW and PMODE/W create the page table entries without
- * caching enabled which hurts the performance of the linear framebuffer
- * as it disables write combining on Pentium Pro and above processors.
- *
- * For those processors cache disabling is better handled through the
- * MTRR registers anyway (we can write combine a region but disable
- * caching) so that MMIO register regions do not screw up.
- */
- if (DSBaseAddr == 0)
- PM_adjustPageTables(linAddr,limit,isCached);
-
- /* Now return the base address of the memory into the default DS */
- return (void*)(linAddr - DSBaseAddr);
-}
-
-#if defined(PM386)
-
-/* Some DOS extender implementations do not directly support calling a
- * real mode procedure from protected mode. However we can simulate what
- * we need temporarily hooking the INT 6Ah vector with a small real mode
- * stub that will call our real mode code for us.
- */
-
-static uchar int6AHandler[] = {
- 0x00,0x00,0x00,0x00, /* __PMODE_callReal variable */
- 0xFB, /* sti */
- 0x2E,0xFF,0x1E,0x00,0x00, /* call [cs:__PMODE_callReal] */
- 0xCF, /* iretf */
- };
-static uchar *crPtr = NULL; /* Pointer to of int 6A handler */
-static uint crRSeg,crROff; /* Real mode seg:offset of handler */
-
-void PMAPI PM_callRealMode(uint seg,uint off, RMREGS *in,
- RMSREGS *sregs)
-{
- uchar *p;
- uint oldSeg,oldOff;
-
- if (!crPtr) {
- /* Allocate and copy the memory block only once */
- crPtr = PM_allocRealSeg(sizeof(int6AHandler), &crRSeg, &crROff);
- memcpy(crPtr,int6AHandler,sizeof(int6AHandler));
- }
- PM_setWord(crPtr,off); /* Plug in address to call */
- PM_setWord(crPtr+2,seg);
- p = PM_mapRealPointer(0,0x6A * 4);
- oldOff = PM_getWord(p); /* Save old handler address */
- oldSeg = PM_getWord(p+2);
- PM_setWord(p,crROff+4); /* Hook 6A handler */
- PM_setWord(p+2,crRSeg);
- PM_int86x(0x6A, in, in, sregs); /* Call real mode code */
- PM_setWord(p,oldOff); /* Restore old handler */
- PM_setWord(p+2,oldSeg);
-}
-
-#endif /* PM386 */
-
-#endif /* !REALMODE */
-
-/****************************************************************************
-REMARKS:
-Allocates a block of locked, physically contiguous memory. The memory
-may be required to be below the 16Meg boundary.
-****************************************************************************/
-void * PMAPI PM_allocLockedMem(
- uint size,
- ulong *physAddr,
- ibool contiguous,
- ibool below16Meg)
-{
- uchar *p,*roundedP;
- uint r_seg,r_off;
- uint roundedSize = (size + 4 + 0xFFF) & ~0xFFF;
- PM_lockHandle lh; /* Unused in DOS */
-#ifndef REALMODE
- VXD_regs regs;
-
- /* If we have connected to our helper VxD in a Windows DOS box, use the
- * helper VxD services to allocate the memory that we need.
- */
- if (VXD_version) {
- memset(&regs,0,sizeof(regs));
- regs.eax = API_NUM(PMHELP_ALLOCLOCKED);
- regs.ebx = size;
- regs.ecx = (ulong)physAddr;
- regs.edx = contiguous | (below16Meg << 8);
- _PM_VxDCall(&regs,_PM_VXD_off,_PM_VXD_sel);
- return (void*)regs.eax;
- }
-
- /* If the memory is not contiguous, we simply need to allocate it
- * using regular memory allocation services, and lock it down
- * in memory.
- *
- * For contiguous memory blocks, the only way to guarantee contiguous physical
- * memory addresses under DOS is to allocate the memory below the
- * 1Meg boundary as real mode memory.
- *
- * Note that we must page align the memory block, and we also must
- * keep track of the non-aligned pointer so we can properly free
- * it later. Hence we actually allocate 4 bytes more than the
- * size rounded up to the next 4K boundary.
- */
- if (!contiguous)
- p = PM_malloc(roundedSize);
- else
-#endif
- p = PM_allocRealSeg(roundedSize,&r_seg,&r_off);
- if (p == NULL)
- return NULL;
- roundedP = (void*)(((ulong)p + 0xFFF) & ~0xFFF);
- *((ulong*)(roundedP + size)) = (ulong)p;
- PM_lockDataPages(roundedP,size,&lh);
- if ((*physAddr = PM_getPhysicalAddr(roundedP)) == 0xFFFFFFFF) {
- PM_freeLockedMem(roundedP,size,contiguous);
- return NULL;
- }
-
- /* Disable caching for the memory since it is probably a DMA buffer */
-#ifndef REALMODE
- PM_adjustPageTables((ulong)roundedP,size-1,false);
-#endif
- return roundedP;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of locked memory.
-****************************************************************************/
-void PMAPI PM_freeLockedMem(void *p,uint size,ibool contiguous)
-{
-#ifndef REALMODE
- VXD_regs regs;
- PM_lockHandle lh; /* Unused in DOS */
-
- if (!p)
- return;
- if (VXD_version) {
- memset(&regs,0,sizeof(regs));
- regs.eax = API_NUM(PMHELP_FREELOCKED);
- regs.ebx = (ulong)p;
- regs.ecx = size;
- regs.edx = contiguous;
- _PM_VxDCall(&regs,_PM_VXD_off,_PM_VXD_sel);
- return;
- }
- PM_unlockDataPages(p,size,&lh);
- if (!contiguous)
- free(*((void**)((uchar*)p + size)));
- else
-#endif
- PM_freeRealSeg(*((void**)((char*)p + size)));
-}
-
-#ifndef REALMODE
-/****************************************************************************
-REMARKS:
-Allocates a new block of pages for the page block manager.
-****************************************************************************/
-static pageblock *PM_addNewPageBlock(void)
-{
- int i,size;
- pageblock *newBlock;
- char *p,*next;
-
- /* Allocate memory for the new page block, and add to head of list */
- size = PAGES_PER_BLOCK * PM_PAGE_SIZE + (PM_PAGE_SIZE-1) + sizeof(pageblock);
- if ((newBlock = PM_malloc(size)) == NULL)
- return NULL;
- newBlock->prev = NULL;
- newBlock->next = pageBlocks;
- if (pageBlocks)
- pageBlocks->prev = newBlock;
- pageBlocks = newBlock;
-
- /* Initialise the page aligned free list for the page block */
- newBlock->freeCount = PAGES_PER_BLOCK;
- newBlock->freeList = p = (char*)(((ulong)(newBlock + 1) + (PM_PAGE_SIZE-1)) & ~(PM_PAGE_SIZE-1));
- newBlock->freeListStart = newBlock->freeList;
- newBlock->freeListEnd = p + (PAGES_PER_BLOCK-1) * PM_PAGE_SIZE;
- for (i = 0; i < PAGES_PER_BLOCK; i++,p = next)
- FREELIST_NEXT(p) = next = p + PM_PAGE_SIZE;
- FREELIST_NEXT(p - PM_PAGE_SIZE) = NULL;
- return newBlock;
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-Allocates a page aligned and page sized block of memory
-****************************************************************************/
-void * PMAPI PM_allocPage(
- ibool locked)
-{
-#ifndef REALMODE
- VXD_regs regs;
- pageblock *block;
- void *p;
- PM_lockHandle lh; /* Unused in DOS */
-
- /* Call the helper VxD for this service if we are running in a DOS box */
- if (VXD_version) {
- memset(&regs,0,sizeof(regs));
- regs.eax = API_NUM(PMHELP_ALLOCPAGE);
- regs.ebx = locked;
- _PM_VxDCall(&regs,_PM_VXD_off,_PM_VXD_sel);
- return (void*)regs.eax;
- }
-
- /* Scan the block list looking for any free blocks. Allocate a new
- * page block if no free blocks are found.
- */
- for (block = pageBlocks; block != NULL; block = block->next) {
- if (block->freeCount)
- break;
- }
- if (block == NULL && (block = PM_addNewPageBlock()) == NULL)
- return NULL;
- block->freeCount--;
- p = block->freeList;
- block->freeList = FREELIST_NEXT(p);
- if (locked)
- PM_lockDataPages(p,PM_PAGE_SIZE,&lh);
- return p;
-#else
- return NULL;
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Free a page aligned and page sized block of memory
-****************************************************************************/
-void PMAPI PM_freePage(
- void *p)
-{
-#ifndef REALMODE
- VXD_regs regs;
- pageblock *block;
-
- /* Call the helper VxD for this service if we are running in a DOS box */
- if (VXD_version) {
- memset(&regs,0,sizeof(regs));
- regs.eax = API_NUM(PMHELP_FREEPAGE);
- regs.ebx = (ulong)p;
- _PM_VxDCall(&regs,_PM_VXD_off,_PM_VXD_sel);
- return;
- }
-
- /* First find the page block that this page belongs to */
- for (block = pageBlocks; block != NULL; block = block->next) {
- if (p >= block->freeListStart && p <= block->freeListEnd)
- break;
- }
- CHECK(block != NULL);
-
- /* Now free the block by adding it to the free list */
- FREELIST_NEXT(p) = block->freeList;
- block->freeList = p;
- if (++block->freeCount == PAGES_PER_BLOCK) {
- /* If all pages in the page block are now free, free the entire
- * page block itself.
- */
- if (block == pageBlocks) {
- /* Delete from head */
- pageBlocks = block->next;
- if (block->next)
- block->next->prev = NULL;
- }
- else {
- /* Delete from middle of list */
- CHECK(block->prev != NULL);
- block->prev->next = block->next;
- if (block->next)
- block->next->prev = block->prev;
- }
- PM_free(block);
- }
-#else
- (void)p;
-#endif
-}
-
-/*-------------------------------------------------------------------------*/
-/* DOS Real Mode support. */
-/*-------------------------------------------------------------------------*/
-
-#ifdef REALMODE
-
-#ifndef MK_FP
-#define MK_FP(s,o) ( (void far *)( ((ulong)(s) << 16) + \
- (ulong)(o) ))
-#endif
-
-void * PMAPI PM_mapRealPointer(uint r_seg,uint r_off)
-{ return MK_FP(r_seg,r_off); }
-
-void * PMAPI PM_getBIOSPointer(void)
-{
- return MK_FP(0x40,0);
-}
-
-void * PMAPI PM_getA0000Pointer(void)
-{
- return MK_FP(0xA000,0);
-}
-
-void * PMAPI PM_mapPhysicalAddr(ulong base,ulong limit,ibool isCached)
-{
- uint sel = base >> 4;
- uint off = base & 0xF;
- limit = limit;
- return MK_FP(sel,off);
-}
-
-void PMAPI PM_freePhysicalAddr(void *ptr,ulong limit)
-{ ptr = ptr; }
-
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{
- return ((((ulong)p >> 16) << 4) + (ushort)p);
-}
-
-ibool PMAPI PM_getPhysicalAddrRange(void *p,ulong length,ulong *physAddress)
-{ return false; }
-
-void * PMAPI PM_mapToProcess(void *base,ulong limit)
-{ return (void*)base; }
-
-void * PMAPI PM_allocRealSeg(uint size,uint *r_seg,uint *r_off)
-{
- /* Call malloc() to allocate the memory for us */
- void *p = PM_malloc(size);
- *r_seg = FP_SEG(p);
- *r_off = FP_OFF(p);
- return p;
-}
-
-void PMAPI PM_freeRealSeg(void *mem)
-{
- if (mem) PM_free(mem);
-}
-
-int PMAPI PM_int86(int intno, RMREGS *in, RMREGS *out)
-{
- return PM_int386(intno,in,out);
-}
-
-int PMAPI PM_int86x(int intno, RMREGS *in, RMREGS *out,
- RMSREGS *sregs)
-{
- return PM_int386x(intno,in,out,sregs);
-}
-
-void PMAPI PM_availableMemory(ulong *physical,ulong *total)
-{
- PMREGS regs;
-
- regs.h.ah = 0x48;
- regs.x.bx = 0xFFFF;
- PM_int86(0x21,&regs,&regs);
- *physical = *total = regs.x.bx * 16UL;
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* Phar Lap TNT DOS Extender support. */
-/*-------------------------------------------------------------------------*/
-
-#ifdef TNT
-
-#include <pldos32.h>
-#include <pharlap.h>
-#include <hw386.h>
-
-static uchar *zeroPtr = NULL;
-
-void * PMAPI PM_getBIOSPointer(void)
-{
- if (!zeroPtr)
- zeroPtr = PM_mapPhysicalAddr(0,0xFFFFF,true);
- return (void*)(zeroPtr + 0x400);
-}
-
-void * PMAPI PM_getA0000Pointer(void)
-{
- static void *bankPtr;
- if (!bankPtr)
- bankPtr = PM_mapPhysicalAddr(0xA0000,0xFFFF,true);
- return bankPtr;
-}
-
-void * PMAPI PM_mapPhysicalAddr(ulong base,ulong limit,ibool isCached)
-{
- CONFIG_INF config;
- ULONG offset;
- int err;
- ulong baseAddr,baseOfs,newLimit;
- VXD_regs regs;
-
- /* If we have connected to our helper VxD in a Windows DOS box, use
- * the helper VxD services to map memory instead of the DPMI services.
- * We do this because the helper VxD can properly disable caching
- * where necessary, which we can only do directly here if we are
- * running at ring 0 (ie: under real DOS).
- */
- if (VXD_version == -1)
- PM_init();
- if (VXD_version) {
- memset(&regs,0,sizeof(regs));
- regs.eax = API_NUM(PMHELP_MAPPHYS);
- regs.ebx = base;
- regs.ecx = limit;
- regs.edx = isCached;
- _PM_VxDCall(&regs,_PM_VXD_off,_PM_VXD_sel);
- return (void*)regs.eax;
- }
-
- /* Round the physical address to a 4Kb boundary and the limit to a
- * 4Kb-1 boundary before passing the values to TNT. If we round the
- * physical address, then we also add an extra offset into the address
- * that we return.
- */
- baseOfs = base & 4095;
- baseAddr = base & ~4095;
- newLimit = ((limit+baseOfs+1+4095) & ~4095)-1;
- _dx_config_inf(&config, (UCHAR*)&config);
- err = _dx_map_phys(config.c_ds_sel,baseAddr,(newLimit + 4095) / 4096,&offset);
- if (err == 130) {
- /* If the TNT function failed, we are running in a DPMI environment
- * and this function does not work. However we know how to handle
- * DPMI properly, so we use our generic DPMI functions to do
- * what the TNT runtime libraries can't.
- */
- return DPMI_mapPhysicalAddr(base,limit,isCached);
- }
- if (err == 0)
- return (void*)(offset + baseOfs);
- return NULL;
-}
-
-void PMAPI PM_freePhysicalAddr(void *ptr,ulong limit)
-{
-}
-
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{ return 0xFFFFFFFFUL; }
-
-ibool PMAPI PM_getPhysicalAddrRange(void *p,ulong length,ulong *physAddress)
-{ return false; }
-
-void * PMAPI PM_mapToProcess(void *base,ulong limit)
-{ return (void*)base; }
-
-void * PMAPI PM_mapRealPointer(uint r_seg,uint r_off)
-{
- if (!zeroPtr)
- zeroPtr = PM_mapPhysicalAddr(0,0xFFFFF);
- return (void*)(zeroPtr + MK_PHYS(r_seg,r_off));
-}
-
-void * PMAPI PM_allocRealSeg(uint size,uint *r_seg,uint *r_off)
-{
- USHORT addr,t;
- void *p;
-
- if (_dx_real_alloc((size + 0xF) >> 4,&addr,&t) != 0)
- return 0;
- *r_seg = addr; /* Real mode segment address */
- *r_off = 0; /* Real mode segment offset */
- p = PM_mapRealPointer(*r_seg,*r_off);
- _PM_addRealModeBlock(p,addr);
- return p;
-}
-
-void PMAPI PM_freeRealSeg(void *mem)
-{
- if (mem) _dx_real_free(_PM_findRealModeBlock(mem));
-}
-
-#define INDPMI(reg) rmregs.reg = regs->reg
-#define OUTDPMI(reg) regs->reg = rmregs.reg
-
-void PMAPI DPMI_int86(int intno, DPMI_regs *regs)
-{
- SWI_REGS rmregs;
-
- memset(&rmregs, 0, sizeof(rmregs));
- INDPMI(eax); INDPMI(ebx); INDPMI(ecx); INDPMI(edx); INDPMI(esi); INDPMI(edi);
-
- _dx_real_int(intno,&rmregs);
-
- OUTDPMI(eax); OUTDPMI(ebx); OUTDPMI(ecx); OUTDPMI(edx); OUTDPMI(esi); OUTDPMI(edi);
- regs->flags = rmregs.flags;
-}
-
-#define IN(reg) rmregs.reg = in->e.reg
-#define OUT(reg) out->e.reg = rmregs.reg
-
-int PMAPI PM_int86(int intno, RMREGS *in, RMREGS *out)
-{
- SWI_REGS rmregs;
-
- memset(&rmregs, 0, sizeof(rmregs));
- IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
-
- _dx_real_int(intno,&rmregs);
-
- OUT(eax); OUT(ebx); OUT(ecx); OUT(edx); OUT(esi); OUT(edi);
- out->x.cflag = rmregs.flags & 0x1;
- return out->x.ax;
-}
-
-int PMAPI PM_int86x(int intno, RMREGS *in, RMREGS *out,
- RMSREGS *sregs)
-{
- SWI_REGS rmregs;
-
- memset(&rmregs, 0, sizeof(rmregs));
- IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
- rmregs.es = sregs->es;
- rmregs.ds = sregs->ds;
-
- _dx_real_int(intno,&rmregs);
-
- OUT(eax); OUT(ebx); OUT(ecx); OUT(edx); OUT(esi); OUT(edi);
- sregs->es = rmregs.es;
- sregs->cs = rmregs.cs;
- sregs->ss = rmregs.ss;
- sregs->ds = rmregs.ds;
- out->x.cflag = rmregs.flags & 0x1;
- return out->x.ax;
-}
-
-void PMAPI PM_availableMemory(ulong *physical,ulong *total)
-{
- PMREGS r;
- uint data[25];
-
- r.x.ax = 0x2520; /* Get free memory info */
- r.x.bx = 0;
- r.e.edx = (uint)data;
- PM_int386(0x21, &r, &r);
- *physical = data[21] * 4096;
- *total = data[23] * 4096;
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* Symantec C++ DOSX and FlashTek X-32/X-32VM support */
-/*-------------------------------------------------------------------------*/
-
-#if defined(DOSX) || defined(X32VM)
-
-#ifdef X32VM
-#include <x32.h>
-
-#define _x386_mk_protected_ptr(p) _x32_mk_protected_ptr((void*)p)
-#define _x386_free_protected_ptr(p) _x32_free_protected_ptr(p)
-#define _x386_zero_base_ptr _x32_zero_base_ptr
-#else
-extern void *_x386_zero_base_ptr;
-#endif
-
-void * PMAPI PM_mapRealPointer(uint r_seg,uint r_off)
-{
- return (void*)((ulong)_x386_zero_base_ptr + MK_PHYS(r_seg,r_off));
-}
-
-void * PMAPI PM_allocRealSeg(uint size,uint *r_seg,uint *r_off)
-{
- PMREGS r;
-
- r.h.ah = 0x48; /* DOS function 48h - allocate mem */
- r.x.bx = (size + 0xF) >> 4; /* Number of paragraphs to allocate */
- PM_int386(0x21, &r, &r); /* Call DOS extender */
- if (r.x.cflag)
- return 0; /* Could not allocate the memory */
- *r_seg = r.e.eax;
- *r_off = 0;
- return PM_mapRealPointer(*r_seg,*r_off);
-}
-
-void PMAPI PM_freeRealSeg(void *mem)
-{
- /* Cannot de-allocate this memory */
- mem = mem;
-}
-
-#pragma pack(1)
-
-typedef struct {
- ushort intno;
- ushort ds;
- ushort es;
- ushort fs;
- ushort gs;
- ulong eax;
- ulong edx;
- } _RMREGS;
-
-#pragma pack()
-
-#define IN(reg) regs.e.reg = in->e.reg
-#define OUT(reg) out->e.reg = regs.e.reg
-
-int PMAPI PM_int86(int intno, RMREGS *in, RMREGS *out)
-{
- _RMREGS rmregs;
- PMREGS regs;
- PMSREGS pmsregs;
-
- rmregs.intno = intno;
- rmregs.eax = in->e.eax;
- rmregs.edx = in->e.edx;
- IN(ebx); IN(ecx); IN(esi); IN(edi);
- regs.x.ax = 0x2511;
- regs.e.edx = (uint)(&rmregs);
- PM_segread(&pmsregs);
- PM_int386x(0x21,&regs,&regs,&pmsregs);
-
- OUT(eax); OUT(ebx); OUT(ecx); OUT(esi); OUT(edi);
- out->x.dx = rmregs.edx;
- out->x.cflag = regs.x.cflag;
- return out->x.ax;
-}
-
-int PMAPI PM_int86x(int intno, RMREGS *in, RMREGS *out, RMSREGS *sregs)
-{
- _RMREGS rmregs;
- PMREGS regs;
- PMSREGS pmsregs;
-
- rmregs.intno = intno;
- rmregs.eax = in->e.eax;
- rmregs.edx = in->e.edx;
- rmregs.es = sregs->es;
- rmregs.ds = sregs->ds;
- IN(ebx); IN(ecx); IN(esi); IN(edi);
- regs.x.ax = 0x2511;
- regs.e.edx = (uint)(&rmregs);
- PM_segread(&pmsregs);
- PM_int386x(0x21,&regs,&regs,&pmsregs);
-
- OUT(eax); OUT(ebx); OUT(ecx); OUT(esi); OUT(edi);
- sregs->es = rmregs.es;
- sregs->ds = rmregs.ds;
- out->x.dx = rmregs.edx;
- out->x.cflag = regs.x.cflag;
- return out->x.ax;
-}
-
-void * PMAPI PM_getBIOSPointer(void)
-{
- return (void*)((ulong)_x386_zero_base_ptr + 0x400);
-}
-
-void * PMAPI PM_getA0000Pointer(void)
-{
- return (void*)((ulong)_x386_zero_base_ptr + 0xA0000);
-}
-
-void * PMAPI PM_mapPhysicalAddr(ulong base,ulong limit,ibool isCached)
-{
- VXD_regs regs;
-
- /* If we have connected to our helper VxD in a Windows DOS box, use
- * the helper VxD services to map memory instead of the DPMI services.
- * We do this because the helper VxD can properly disable caching
- * where necessary, which we can only do directly here if we are
- * running at ring 0 (ie: under real DOS).
- */
- if (VXD_version == -1)
- PM_init();
- if (VXD_version) {
- memset(&regs,0,sizeof(regs));
- regs.eax = API_NUM(PMHELP_MAPPHYS);
- regs.ebx = base;
- regs.ecx = limit;
- regs.edx = isCached;
- _PM_VxDCall(&regs,_PM_VXD_off,_PM_VXD_sel);
- return (void*)regs.eax;
- }
-
- if (base > 0x100000)
- return _x386_map_physical_address((void*)base,limit);
- return (void*)((ulong)_x386_zero_base_ptr + base);
-}
-
-void PMAPI PM_freePhysicalAddr(void *ptr,ulong limit)
-{
- /* Mapping cannot be freed */
-}
-
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{ return 0xFFFFFFFFUL; }
-
-ibool PMAPI PM_getPhysicalAddrRange(void *p,ulong length,ulong *physAddress)
-{ return false; }
-
-void * PMAPI PM_mapToProcess(void *base,ulong limit)
-{ return (void*)base; }
-
-ulong _cdecl _X32_getPhysMem(void);
-
-void PMAPI PM_availableMemory(ulong *physical,ulong *total)
-{
- PMREGS regs;
-
- /* Get total memory available, including virtual memory */
- regs.x.ax = 0x350B;
- PM_int386(0x21,&regs,&regs);
- *total = regs.e.eax;
-
- /* Get physical memory available */
- *physical = _X32_getPhysMem();
- if (*physical > *total)
- *physical = *total;
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* Borland's DPMI32, Watcom DOS4GW and DJGPP DPMI support routines */
-/*-------------------------------------------------------------------------*/
-
-#if defined(DPMI32) || defined(DOS4GW) || defined(DJGPP)
-
-void * PMAPI PM_getBIOSPointer(void)
-{
- return PM_mapPhysicalAddr(0x400,0xFFFF,true);
-}
-
-void * PMAPI PM_getA0000Pointer(void)
-{
- return PM_mapPhysicalAddr(0xA0000,0xFFFF,true);
-}
-
-void * PMAPI PM_mapPhysicalAddr(ulong base,ulong limit,ibool isCached)
-{
- VXD_regs regs;
-
-#ifdef DJGPP
- /* Enable near pointers for DJGPP V2 */
- __djgpp_nearptr_enable();
-#endif
- /* If we have connected to our helper VxD in a Windows DOS box, use
- * the helper VxD services to map memory instead of the DPMI services.
- * We do this because the helper VxD can properly disable caching
- * where necessary, which we can only do directly here if we are
- * running at ring 0 (ie: under real DOS).
- */
- if (VXD_version == -1)
- PM_init();
- if (VXD_version) {
- memset(&regs,0,sizeof(regs));
- regs.eax = API_NUM(PMHELP_MAPPHYS);
- regs.ebx = base;
- regs.ecx = limit;
- regs.edx = isCached;
- _PM_VxDCall(&regs,_PM_VXD_off,_PM_VXD_sel);
- return (void*)regs.eax;
- }
- return DPMI_mapPhysicalAddr(base,limit,isCached);
-}
-
-void PMAPI PM_freePhysicalAddr(void *ptr,ulong limit)
-{
- /* Mapping cannot be freed */
- (void)ptr;
- (void)limit;
-}
-
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{
- ulong physAddr;
- if (!PM_getPhysicalAddrRange(p,1,&physAddr))
- return 0xFFFFFFFF;
- return physAddr | ((ulong)p & 0xFFF);
-}
-
-ibool PMAPI PM_getPhysicalAddrRange(
- void *p,
- ulong length,
- ulong *physAddress)
-{
- VXD_regs regs;
- ulong pte;
- PMSREGS sregs;
- ulong DSBaseAddr;
-
- /* If we have connected to our helper VxD in a Windows DOS box, use the
- * helper VxD services to find the physical address of an address.
- */
- if (VXD_version) {
- memset(&regs,0,sizeof(regs));
- regs.eax = API_NUM(PMHELP_GETPHYSICALADDRRANGE);
- regs.ebx = (ulong)p;
- regs.ecx = (ulong)length;
- regs.edx = (ulong)physAddress;
- _PM_VxDCall(&regs,_PM_VXD_off,_PM_VXD_sel);
- return regs.eax;
- }
-
- /* Find base address for default DS selector */
- PM_segread(&sregs);
- DSBaseAddr = DPMI_getSelectorBase(sregs.ds);
-
- /* Otherwise directly access the page tables to determine the
- * physical memory address. Note that we touch the memory before
- * calling, otherwise the memory may not be paged in correctly.
- */
- pte = *((ulong*)p);
-#ifdef DOS4GW
- if (_PM_pagingEnabled() == 0) {
- int count;
- ulong linAddr = (ulong)p;
-
- /* When paging is disabled physical=linear */
- for (count = (length+0xFFF) >> 12; count > 0; count--) {
- *physAddress++ = linAddr;
- linAddr += 4096;
- }
- return true;
- }
- else if ((PDB = _PM_getPDB()) != 0 && DSBaseAddr == 0) {
- int startPDB,endPDB,iPDB,startPage,endPage,start,end,iPage;
- ulong pageTable,*pPageTable,linAddr = (ulong)p;
- ulong limit = length-1;
-
- pPDB = (ulong*)DPMI_mapPhysicalToLinear(PDB,0xFFF);
- if (pPDB) {
- startPDB = (linAddr >> 22) & 0x3FFL;
- startPage = (linAddr >> 12) & 0x3FFL;
- endPDB = ((linAddr+limit) >> 22) & 0x3FFL;
- endPage = ((linAddr+limit) >> 12) & 0x3FFL;
- for (iPDB = startPDB; iPDB <= endPDB; iPDB++) {
- pageTable = pPDB[iPDB] & ~0xFFFL;
- pPageTable = (ulong*)DPMI_mapPhysicalToLinear(pageTable,0xFFF);
- start = (iPDB == startPDB) ? startPage : 0;
- end = (iPDB == endPDB) ? endPage : 0x3FFL;
- for (iPage = start; iPage <= end; iPage++)
- *physAddress++ = (pPageTable[iPage] & ~0xFFF);
- }
- return true;
- }
- }
-#endif
- return false;
-}
-
-void * PMAPI PM_mapToProcess(void *base,ulong limit)
-{
- (void)limit;
- return (void*)base;
-}
-
-void * PMAPI PM_mapRealPointer(uint r_seg,uint r_off)
-{
- static uchar *zeroPtr = NULL;
-
- if (!zeroPtr)
- zeroPtr = PM_mapPhysicalAddr(0,0xFFFFF,true);
- return (void*)(zeroPtr + MK_PHYS(r_seg,r_off));
-}
-
-void * PMAPI PM_allocRealSeg(uint size,uint *r_seg,uint *r_off)
-{
- PMREGS r;
- void *p;
-
- r.x.ax = 0x100; /* DPMI allocate DOS memory */
- r.x.bx = (size + 0xF) >> 4; /* number of paragraphs */
- PM_int386(0x31, &r, &r);
- if (r.x.cflag)
- return NULL; /* DPMI call failed */
- *r_seg = r.x.ax; /* Real mode segment */
- *r_off = 0;
- p = PM_mapRealPointer(*r_seg,*r_off);
- _PM_addRealModeBlock(p,r.x.dx);
- return p;
-}
-
-void PMAPI PM_freeRealSeg(void *mem)
-{
- PMREGS r;
-
- if (mem) {
- r.x.ax = 0x101; /* DPMI free DOS memory */
- r.x.dx = _PM_findRealModeBlock(mem);/* DX := selector from 0x100 */
- PM_int386(0x31, &r, &r);
- }
-}
-
-static DPMI_handler_t DPMI_int10 = NULL;
-
-void PMAPI DPMI_setInt10Handler(DPMI_handler_t handler)
-{
- DPMI_int10 = handler;
-}
-
-void PMAPI DPMI_int86(int intno, DPMI_regs *regs)
-{
- PMREGS r;
- PMSREGS sr;
-
- if (intno == 0x10 && DPMI_int10) {
- if (DPMI_int10(regs))
- return;
- }
- PM_segread(&sr);
- r.x.ax = 0x300; /* DPMI issue real interrupt */
- r.h.bl = intno;
- r.h.bh = 0;
- r.x.cx = 0;
- sr.es = sr.ds;
- r.e.edi = (uint)regs;
- PM_int386x(0x31, &r, &r, &sr); /* Issue the interrupt */
-}
-
-#define IN(reg) rmregs.reg = in->e.reg
-#define OUT(reg) out->e.reg = rmregs.reg
-
-int PMAPI PM_int86(int intno, RMREGS *in, RMREGS *out)
-{
- DPMI_regs rmregs;
-
- memset(&rmregs, 0, sizeof(rmregs));
- IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
-
- DPMI_int86(intno,&rmregs); /* DPMI issue real interrupt */
-
- OUT(eax); OUT(ebx); OUT(ecx); OUT(edx); OUT(esi); OUT(edi);
- out->x.cflag = rmregs.flags & 0x1;
- return out->x.ax;
-}
-
-int PMAPI PM_int86x(int intno, RMREGS *in, RMREGS *out,
- RMSREGS *sregs)
-{
- DPMI_regs rmregs;
-
- memset(&rmregs, 0, sizeof(rmregs));
- IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
- rmregs.es = sregs->es;
- rmregs.ds = sregs->ds;
-
- DPMI_int86(intno,&rmregs); /* DPMI issue real interrupt */
-
- OUT(eax); OUT(ebx); OUT(ecx); OUT(edx); OUT(esi); OUT(edi);
- sregs->es = rmregs.es;
- sregs->cs = rmregs.cs;
- sregs->ss = rmregs.ss;
- sregs->ds = rmregs.ds;
- out->x.cflag = rmregs.flags & 0x1;
- return out->x.ax;
-}
-
-#pragma pack(1)
-
-typedef struct {
- uint LargestBlockAvail;
- uint MaxUnlockedPage;
- uint LargestLockablePage;
- uint LinAddrSpace;
- uint NumFreePagesAvail;
- uint NumPhysicalPagesFree;
- uint TotalPhysicalPages;
- uint FreeLinAddrSpace;
- uint SizeOfPageFile;
- uint res[3];
- } MemInfo;
-
-#pragma pack()
-
-void PMAPI PM_availableMemory(ulong *physical,ulong *total)
-{
- PMREGS r;
- PMSREGS sr;
- MemInfo memInfo;
-
- PM_segread(&sr);
- r.x.ax = 0x500; /* DPMI get free memory info */
- sr.es = sr.ds;
- r.e.edi = (uint)&memInfo;
- PM_int386x(0x31, &r, &r, &sr); /* Issue the interrupt */
- *physical = memInfo.NumPhysicalPagesFree * 4096;
- *total = memInfo.LargestBlockAvail;
- if (*total < *physical)
- *physical = *total;
-}
-
-#endif
-
-#ifndef __16BIT__
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display banks.
-****************************************************************************/
-void PMAPI PM_setBankA(
- int bank)
-{
- DPMI_regs regs;
- memset(&regs, 0, sizeof(regs));
- regs.eax = 0x4F05;
- regs.ebx = 0x0000;
- regs.edx = bank;
- DPMI_int86(0x10,&regs);
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display banks.
-****************************************************************************/
-void PMAPI PM_setBankAB(
- int bank)
-{
- DPMI_regs regs;
- memset(&regs, 0, sizeof(regs));
- regs.eax = 0x4F05;
- regs.ebx = 0x0000;
- regs.edx = bank;
- DPMI_int86(0x10,&regs);
- regs.eax = 0x4F05;
- regs.ebx = 0x0001;
- regs.edx = bank;
- DPMI_int86(0x10,&regs);
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display start address.
-****************************************************************************/
-void PMAPI PM_setCRTStart(
- int x,
- int y,
- int waitVRT)
-{
- DPMI_regs regs;
- memset(&regs, 0, sizeof(regs));
- regs.eax = 0x4F07;
- regs.ebx = waitVRT;
- regs.ecx = x;
- regs.edx = y;
- DPMI_int86(0x10,&regs);
-}
-
-#endif
-
-/****************************************************************************
-REMARKS:
-Function to get the file attributes for a specific file.
-****************************************************************************/
-uint PMAPI PM_getFileAttr(
- const char *filename)
-{
- /* TODO: Implement this! */
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_getFileTime(
- const char *filename,
- ibool gmTime,
- PM_time *time)
-{
- /* TODO: Implement this! */
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to set the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_setFileTime(
- const char *filename,
- ibool gmTime,
- PM_time *time)
-{
- /* TODO: Implement this! */
- return false;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/pmdos.c b/board/MAI/bios_emulator/scitech/src/pm/dos/pmdos.c
deleted file mode 100644
index eecc2daede..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/pmdos.c
+++ /dev/null
@@ -1,1637 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 16/32 bit DOS
-*
-* Description: Implementation for the OS Portability Manager Library, which
-* contains functions to implement OS specific services in a
-* generic, cross platform API. Porting the OS Portability
-* Manager library is the first step to porting any SciTech
-* products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <dos.h>
-
-/*--------------------------- Global variables ----------------------------*/
-
-#ifndef REALMODE
-static int globalDataStart;
-#endif
-
-PM_criticalHandler _VARAPI _PM_critHandler = NULL;
-PM_breakHandler _VARAPI _PM_breakHandler = NULL;
-PM_intHandler _VARAPI _PM_timerHandler = NULL;
-PM_intHandler _VARAPI _PM_rtcHandler = NULL;
-PM_intHandler _VARAPI _PM_keyHandler = NULL;
-PM_key15Handler _VARAPI _PM_key15Handler = NULL;
-PM_mouseHandler _VARAPI _PM_mouseHandler = NULL;
-PM_intHandler _VARAPI _PM_int10Handler = NULL;
-int _VARAPI _PM_mouseMask;
-
-uchar * _VARAPI _PM_ctrlCPtr; /* Location of Ctrl-C flag */
-uchar * _VARAPI _PM_ctrlBPtr; /* Location of Ctrl-Break flag */
-uchar * _VARAPI _PM_critPtr; /* Location of Critical error Bf*/
-PMFARPTR _VARAPI _PM_prevTimer = PMNULL; /* Previous timer handler */
-PMFARPTR _VARAPI _PM_prevRTC = PMNULL; /* Previous RTC handler */
-PMFARPTR _VARAPI _PM_prevKey = PMNULL; /* Previous key handler */
-PMFARPTR _VARAPI _PM_prevKey15 = PMNULL; /* Previous key15 handler */
-PMFARPTR _VARAPI _PM_prevBreak = PMNULL; /* Previous break handler */
-PMFARPTR _VARAPI _PM_prevCtrlC = PMNULL; /* Previous CtrlC handler */
-PMFARPTR _VARAPI _PM_prevCritical = PMNULL; /* Previous critical handler */
-long _VARAPI _PM_prevRealTimer; /* Previous real mode timer */
-long _VARAPI _PM_prevRealRTC; /* Previous real mode RTC */
-long _VARAPI _PM_prevRealKey; /* Previous real mode key */
-long _VARAPI _PM_prevRealKey15; /* Previous real mode key15 */
-long _VARAPI _PM_prevRealInt10; /* Previous real mode int 10h */
-static uchar _PM_oldCMOSRegA; /* CMOS register A contents */
-static uchar _PM_oldCMOSRegB; /* CMOS register B contents */
-static uchar _PM_oldRTCPIC2; /* Mask value for RTC IRQ8 */
-
-/* Structure to maintain information about hardware interrupt handlers,
- * include a copy of the hardware IRQ assembler thunk (one for each
- * hooked interrupt handler).
- */
-
-typedef struct {
- uchar IRQ;
- uchar IRQVect;
- uchar prevPIC;
- uchar prevPIC2;
- PMFARPTR prevHandler;
- long prevRealhandler;
- uchar thunk[1];
- /* IRQ assembler thunk follows ... */
- } _PM_IRQHandle;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* Globals for locking interrupt handlers in _pmdos.asm */
-
-#ifndef REALMODE
-extern int _VARAPI _PM_pmdosDataStart;
-extern int _VARAPI _PM_pmdosDataEnd;
-extern int _VARAPI _PM_DMADataStart;
-extern int _VARAPI _PM_DMADataEnd;
-void _ASMAPI _PM_pmdosCodeStart(void);
-void _ASMAPI _PM_pmdosCodeEnd(void);
-void _ASMAPI _PM_DMACodeStart(void);
-void _ASMAPI _PM_DMACodeEnd(void);
-#endif
-
-/* Protected mode interrupt handlers, also called by PM callbacks below */
-
-void _ASMAPI _PM_timerISR(void);
-void _ASMAPI _PM_rtcISR(void);
-void _ASMAPI _PM_irqISRTemplate(void);
-void _ASMAPI _PM_irqISRTemplateEnd(void);
-void _ASMAPI _PM_keyISR(void);
-void _ASMAPI _PM_key15ISR(void);
-void _ASMAPI _PM_breakISR(void);
-void _ASMAPI _PM_ctrlCISR(void);
-void _ASMAPI _PM_criticalISR(void);
-void _ASMAPI _PM_mouseISR(void);
-void _ASMAPI _PM_int10PMCB(void);
-
-/* Protected mode DPMI callback handlers */
-
-void _ASMAPI _PM_mousePMCB(void);
-
-/* Routine to install a mouse handler function */
-
-void _ASMAPI _PM_setMouseHandler(int mask);
-
-/* Routine to allocate DPMI real mode callback routines */
-
-ibool _ASMAPI _DPMI_allocateCallback(void (_ASMAPI *pmcode)(),void *rmregs,long *RMCB);
-void _ASMAPI _DPMI_freeCallback(long RMCB);
-
-/* DPMI helper functions in PMLITE.C */
-
-ulong PMAPI DPMI_mapPhysicalToLinear(ulong physAddr,ulong limit);
-int PMAPI DPMI_setSelectorBase(ushort sel,ulong linAddr);
-ulong PMAPI DPMI_getSelectorBase(ushort sel);
-int PMAPI DPMI_setSelectorLimit(ushort sel,ulong limit);
-uint PMAPI DPMI_createSelector(ulong base,ulong limit);
-void PMAPI DPMI_freeSelector(uint sel);
-int PMAPI DPMI_lockLinearPages(ulong linear,ulong len);
-int PMAPI DPMI_unlockLinearPages(ulong linear,ulong len);
-
-/* Functions to read and write CMOS registers */
-
-uchar PMAPI _PM_readCMOS(int index);
-void PMAPI _PM_writeCMOS(int index,uchar value);
-
-/*-------------------------------------------------------------------------*/
-/* Generic routines common to all environments */
-/*-------------------------------------------------------------------------*/
-
-void PMAPI PM_resetMouseDriver(int hardReset)
-{
- RMREGS regs;
- PM_mouseHandler oldHandler = _PM_mouseHandler;
-
- PM_restoreMouseHandler();
- regs.x.ax = hardReset ? 0 : 33;
- PM_int86(0x33, &regs, &regs);
- if (oldHandler)
- PM_setMouseHandler(_PM_mouseMask, oldHandler);
-}
-
-void PMAPI PM_setRealTimeClockFrequency(int frequency)
-{
- static short convert[] = {
- 8192,
- 4096,
- 2048,
- 1024,
- 512,
- 256,
- 128,
- 64,
- 32,
- 16,
- 8,
- 4,
- 2,
- -1,
- };
- int i;
-
- /* First clear any pending RTC timeout if not cleared */
- _PM_readCMOS(0x0C);
- if (frequency == 0) {
- /* Disable RTC timout */
- _PM_writeCMOS(0x0A,_PM_oldCMOSRegA);
- _PM_writeCMOS(0x0B,_PM_oldCMOSRegB & 0x0F);
- }
- else {
- /* Convert frequency value to RTC clock indexes */
- for (i = 0; convert[i] != -1; i++) {
- if (convert[i] == frequency)
- break;
- }
-
- /* Set RTC timout value and enable timeout */
- _PM_writeCMOS(0x0A,0x20 | (i+3));
- _PM_writeCMOS(0x0B,(_PM_oldCMOSRegB & 0x0F) | 0x40);
- }
-}
-
-#ifndef REALMODE
-
-static void PMAPI lockPMHandlers(void)
-{
- static int locked = 0;
- int stat;
- PM_lockHandle lh; /* Unused in DOS */
-
- /* Lock all of the code and data used by our protected mode interrupt
- * handling routines, so that it will continue to work correctly
- * under real mode.
- */
- if (!locked) {
- PM_saveDS();
- stat = !PM_lockDataPages(&globalDataStart-2048,4096,&lh);
- stat |= !PM_lockDataPages(&_PM_pmdosDataStart,(int)&_PM_pmdosDataEnd - (int)&_PM_pmdosDataStart,&lh);
- stat |= !PM_lockCodePages((__codePtr)_PM_pmdosCodeStart,(int)_PM_pmdosCodeEnd-(int)_PM_pmdosCodeStart,&lh);
- stat |= !PM_lockDataPages(&_PM_DMADataStart,(int)&_PM_DMADataEnd - (int)&_PM_DMADataStart,&lh);
- stat |= !PM_lockCodePages((__codePtr)_PM_DMACodeStart,(int)_PM_DMACodeEnd-(int)_PM_DMACodeStart,&lh);
- if (stat) {
- printf("Page locking services failed - interrupt handling not safe!\n");
- exit(1);
- }
- locked = 1;
- }
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* DOS Real Mode support. */
-/*-------------------------------------------------------------------------*/
-
-#ifdef REALMODE
-
-#ifndef MK_FP
-#define MK_FP(s,o) ( (void far *)( ((ulong)(s) << 16) + \
- (ulong)(o) ))
-#endif
-
-int PMAPI PM_setMouseHandler(int mask, PM_mouseHandler mh)
-{
- PM_saveDS();
- _PM_mouseHandler = mh;
- _PM_setMouseHandler(_PM_mouseMask = mask);
- return 1;
-}
-
-void PMAPI PM_restoreMouseHandler(void)
-{
- union REGS regs;
-
- if (_PM_mouseHandler) {
- regs.x.ax = 33;
- int86(0x33, &regs, &regs);
- _PM_mouseHandler = NULL;
- }
-}
-
-void PMAPI PM_setTimerHandler(PM_intHandler th)
-{
- _PM_getRMvect(0x8, (long*)&_PM_prevTimer);
- _PM_timerHandler = th;
- _PM_setRMvect(0x8, (long)_PM_timerISR);
-}
-
-void PMAPI PM_restoreTimerHandler(void)
-{
- if (_PM_timerHandler) {
- _PM_setRMvect(0x8, (long)_PM_prevTimer);
- _PM_timerHandler = NULL;
- }
-}
-
-ibool PMAPI PM_setRealTimeClockHandler(PM_intHandler th,int frequency)
-{
- /* Save the old CMOS real time clock values */
- _PM_oldCMOSRegA = _PM_readCMOS(0x0A);
- _PM_oldCMOSRegB = _PM_readCMOS(0x0B);
-
- /* Set the real time clock interrupt handler */
- _PM_getRMvect(0x70, (long*)&_PM_prevRTC);
- _PM_rtcHandler = th;
- _PM_setRMvect(0x70, (long)_PM_rtcISR);
-
- /* Program the real time clock default frequency */
- PM_setRealTimeClockFrequency(frequency);
-
- /* Unmask IRQ8 in the PIC2 */
- _PM_oldRTCPIC2 = PM_inpb(0xA1);
- PM_outpb(0xA1,_PM_oldRTCPIC2 & 0xFE);
- return true;
-}
-
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
- if (_PM_rtcHandler) {
- /* Restore CMOS registers and mask RTC clock */
- _PM_writeCMOS(0x0A,_PM_oldCMOSRegA);
- _PM_writeCMOS(0x0B,_PM_oldCMOSRegB);
- PM_outpb(0xA1,(PM_inpb(0xA1) & 0xFE) | (_PM_oldRTCPIC2 & ~0xFE));
-
- /* Restore the interrupt vector */
- _PM_setRMvect(0x70, (long)_PM_prevRTC);
- _PM_rtcHandler = NULL;
- }
-}
-
-void PMAPI PM_setKeyHandler(PM_intHandler kh)
-{
- _PM_getRMvect(0x9, (long*)&_PM_prevKey);
- _PM_keyHandler = kh;
- _PM_setRMvect(0x9, (long)_PM_keyISR);
-}
-
-void PMAPI PM_restoreKeyHandler(void)
-{
- if (_PM_keyHandler) {
- _PM_setRMvect(0x9, (long)_PM_prevKey);
- _PM_keyHandler = NULL;
- }
-}
-
-void PMAPI PM_setKey15Handler(PM_key15Handler kh)
-{
- _PM_getRMvect(0x15, (long*)&_PM_prevKey15);
- _PM_key15Handler = kh;
- _PM_setRMvect(0x15, (long)_PM_key15ISR);
-}
-
-void PMAPI PM_restoreKey15Handler(void)
-{
- if (_PM_key15Handler) {
- _PM_setRMvect(0x15, (long)_PM_prevKey15);
- _PM_key15Handler = NULL;
- }
-}
-
-void PMAPI PM_installAltBreakHandler(PM_breakHandler bh)
-{
- static int ctrlCFlag,ctrlBFlag;
-
- _PM_ctrlCPtr = (uchar*)&ctrlCFlag;
- _PM_ctrlBPtr = (uchar*)&ctrlBFlag;
- _PM_getRMvect(0x1B, (long*)&_PM_prevBreak);
- _PM_getRMvect(0x23, (long*)&_PM_prevCtrlC);
- _PM_breakHandler = bh;
- _PM_setRMvect(0x1B, (long)_PM_breakISR);
- _PM_setRMvect(0x23, (long)_PM_ctrlCISR);
-}
-
-void PMAPI PM_installBreakHandler(void)
-{
- PM_installAltBreakHandler(NULL);
-}
-
-void PMAPI PM_restoreBreakHandler(void)
-{
- if (_PM_prevBreak) {
- _PM_setRMvect(0x1B, (long)_PM_prevBreak);
- _PM_setRMvect(0x23, (long)_PM_prevCtrlC);
- _PM_prevBreak = NULL;
- _PM_breakHandler = NULL;
- }
-}
-
-void PMAPI PM_installAltCriticalHandler(PM_criticalHandler ch)
-{
- static short critBuf[2];
-
- _PM_critPtr = (uchar*)critBuf;
- _PM_getRMvect(0x24, (long*)&_PM_prevCritical);
- _PM_critHandler = ch;
- _PM_setRMvect(0x24, (long)_PM_criticalISR);
-}
-
-void PMAPI PM_installCriticalHandler(void)
-{
- PM_installAltCriticalHandler(NULL);
-}
-
-void PMAPI PM_restoreCriticalHandler(void)
-{
- if (_PM_prevCritical) {
- _PM_setRMvect(0x24, (long)_PM_prevCritical);
- _PM_prevCritical = NULL;
- _PM_critHandler = NULL;
- }
-}
-
-int PMAPI PM_lockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
- p = p; len = len; /* Do nothing for real mode */
- return 1;
-}
-
-int PMAPI PM_unlockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
- p = p; len = len; /* Do nothing for real mode */
- return 1;
-}
-
-int PMAPI PM_lockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
- p = p; len = len; /* Do nothing for real mode */
- return 1;
-}
-
-int PMAPI PM_unlockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
- p = p; len = len; /* Do nothing for real mode */
- return 1;
-}
-
-void PMAPI PM_getPMvect(int intno, PMFARPTR *isr)
-{
- long t;
- _PM_getRMvect(intno,&t);
- *isr = (void*)t;
-}
-
-void PMAPI PM_setPMvect(int intno, PM_intHandler isr)
-{
- PM_saveDS();
- _PM_setRMvect(intno,(long)isr);
-}
-
-void PMAPI PM_restorePMvect(int intno, PMFARPTR isr)
-{
- _PM_setRMvect(intno,(long)isr);
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* Phar Lap TNT DOS Extender support. */
-/*-------------------------------------------------------------------------*/
-
-#ifdef TNT
-
-#include <pldos32.h>
-#include <pharlap.h>
-#include <hw386.h>
-
-static long prevRealBreak; /* Previous real mode break handler */
-static long prevRealCtrlC; /* Previous real mode CtrlC handler */
-static long prevRealCritical; /* Prev real mode critical handler */
-static uchar *mousePtr;
-
-/* The following real mode routine is used to call a 32 bit protected
- * mode FAR function from real mode. We use this for passing up control
- * from the real mode mouse callback to our protected mode code.
- */
-
-static UCHAR realHandler[] = { /* Real mode code generic handler */
- 0x00,0x00,0x00,0x00, /* __PM_callProtp */
- 0x00,0x00, /* __PM_protCS */
- 0x00,0x00,0x00,0x00, /* __PM_protHandler */
- 0x66,0x60, /* pushad */
- 0x1E, /* push ds */
- 0x6A,0x00, /* push 0 */
- 0x6A,0x00, /* push 0 */
- 0x2E,0xFF,0x36,0x04,0x00, /* push [cs:__PM_protCS] */
- 0x66,0x2E,0xFF,0x36,0x06,0x00, /* push [cs:__PM_protHandler] */
- 0x2E,0xFF,0x1E,0x00,0x00, /* call [cs:__PM_callProtp] */
- 0x83,0xC4,0x0A, /* add sp,10 */
- 0x1F, /* pop ds */
- 0x66,0x61, /* popad */
- 0xCB, /* retf */
- };
-
-/* The following functions installs the above realmode callback mechanism
- * in real mode memory for calling the protected mode routine.
- */
-
-uchar * installCallback(void (PMAPI *pmCB)(),uint *rseg, uint *roff)
-{
- CONFIG_INF config;
- REALPTR realBufAdr,callProtp;
- ULONG bufSize;
- FARPTR protBufAdr;
- uchar *p;
-
- /* Get address of real mode routine to call up to protected mode */
- _dx_rmlink_get(&callProtp, &realBufAdr, &bufSize, &protBufAdr);
- _dx_config_inf(&config, (UCHAR*)&config);
-
- /* Fill in the values in the real mode code segment so that it will
- * call the correct routine.
- */
- *((REALPTR*)&realHandler[0]) = callProtp;
- *((USHORT*)&realHandler[4]) = config.c_cs_sel;
- *((ULONG*)&realHandler[6]) = (ULONG)pmCB;
-
- /* Copy the real mode handler to real mode memory */
- if ((p = PM_allocRealSeg(sizeof(realHandler),rseg,roff)) == NULL)
- return NULL;
- memcpy(p,realHandler,sizeof(realHandler));
-
- /* Skip past global variabls in real mode code segment */
- *roff += 0x0A;
- return p;
-}
-
-int PMAPI PM_setMouseHandler(int mask, PM_mouseHandler mh)
-{
- RMREGS regs;
- RMSREGS sregs;
- uint rseg,roff;
-
- lockPMHandlers(); /* Ensure our handlers are locked */
-
- if ((mousePtr = installCallback(_PM_mouseISR, &rseg, &roff)) == NULL)
- return 0;
- _PM_mouseHandler = mh;
-
- /* Install the real mode mouse handler */
- sregs.es = rseg;
- regs.x.dx = roff;
- regs.x.cx = _PM_mouseMask = mask;
- regs.x.ax = 0xC;
- PM_int86x(0x33, &regs, &regs, &sregs);
- return 1;
-}
-
-void PMAPI PM_restoreMouseHandler(void)
-{
- RMREGS regs;
-
- if (_PM_mouseHandler) {
- regs.x.ax = 33;
- PM_int86(0x33, &regs, &regs);
- PM_freeRealSeg(mousePtr);
- _PM_mouseHandler = NULL;
- }
-}
-
-void PMAPI PM_getPMvect(int intno, PMFARPTR *isr)
-{
- FARPTR ph;
-
- _dx_pmiv_get(intno, &ph);
- isr->sel = FP_SEL(ph);
- isr->off = FP_OFF(ph);
-}
-
-void PMAPI PM_setPMvect(int intno, PM_intHandler isr)
-{
- CONFIG_INF config;
- FARPTR ph;
-
- PM_saveDS();
- _dx_config_inf(&config, (UCHAR*)&config);
- FP_SET(ph,(uint)isr,config.c_cs_sel);
- _dx_pmiv_set(intno,ph);
-}
-
-void PMAPI PM_restorePMvect(int intno, PMFARPTR isr)
-{
- FARPTR ph;
-
- FP_SET(ph,isr.off,isr.sel);
- _dx_pmiv_set(intno,ph);
-}
-
-static void getISR(int intno, PMFARPTR *pmisr, long *realisr)
-{
- PM_getPMvect(intno,pmisr);
- _PM_getRMvect(intno, realisr);
-}
-
-static void restoreISR(int intno, PMFARPTR pmisr, long realisr)
-{
- _PM_setRMvect(intno,realisr);
- PM_restorePMvect(intno,pmisr);
-}
-
-static void setISR(int intno, void (PMAPI *isr)())
-{
- CONFIG_INF config;
- FARPTR ph;
-
- lockPMHandlers(); /* Ensure our handlers are locked */
-
- _dx_config_inf(&config, (UCHAR*)&config);
- FP_SET(ph,(uint)isr,config.c_cs_sel);
- _dx_apmiv_set(intno,ph);
-}
-
-void PMAPI PM_setTimerHandler(PM_intHandler th)
-{
- getISR(0x8, &_PM_prevTimer, &_PM_prevRealTimer);
- _PM_timerHandler = th;
- setISR(0x8, _PM_timerISR);
-}
-
-void PMAPI PM_restoreTimerHandler(void)
-{
- if (_PM_timerHandler) {
- restoreISR(0x8, _PM_prevTimer, _PM_prevRealTimer);
- _PM_timerHandler = NULL;
- }
-}
-
-ibool PMAPI PM_setRealTimeClockHandler(PM_intHandler th,int frequency)
-{
- /* Save the old CMOS real time clock values */
- _PM_oldCMOSRegA = _PM_readCMOS(0x0A);
- _PM_oldCMOSRegB = _PM_readCMOS(0x0B);
-
- /* Set the real time clock interrupt handler */
- getISR(0x70, &_PM_prevRTC, &_PM_prevRealRTC);
- _PM_rtcHandler = th;
- setISR(0x70, _PM_rtcISR);
-
- /* Program the real time clock default frequency */
- PM_setRealTimeClockFrequency(frequency);
-
- /* Unmask IRQ8 in the PIC2 */
- _PM_oldRTCPIC2 = PM_inpb(0xA1);
- PM_outpb(0xA1,_PM_oldRTCPIC2 & 0xFE);
- return true;
-}
-
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
- if (_PM_rtcHandler) {
- /* Restore CMOS registers and mask RTC clock */
- _PM_writeCMOS(0x0A,_PM_oldCMOSRegA);
- _PM_writeCMOS(0x0B,_PM_oldCMOSRegB);
- PM_outpb(0xA1,(PM_inpb(0xA1) & 0xFE) | (_PM_oldRTCPIC2 & ~0xFE));
-
- /* Restore the interrupt vector */
- restoreISR(0x70, _PM_prevRTC, _PM_prevRealRTC);
- _PM_rtcHandler = NULL;
- }
-}
-
-void PMAPI PM_setKeyHandler(PM_intHandler kh)
-{
- getISR(0x9, &_PM_prevKey, &_PM_prevRealKey);
- _PM_keyHandler = kh;
- setISR(0x9, _PM_keyISR);
-}
-
-void PMAPI PM_restoreKeyHandler(void)
-{
- if (_PM_keyHandler) {
- restoreISR(0x9, _PM_prevKey, _PM_prevRealKey);
- _PM_keyHandler = NULL;
- }
-}
-
-void PMAPI PM_setKey15Handler(PM_key15Handler kh)
-{
- getISR(0x15, &_PM_prevKey15, &_PM_prevRealKey15);
- _PM_key15Handler = kh;
- setISR(0x15, _PM_key15ISR);
-}
-
-void PMAPI PM_restoreKey15Handler(void)
-{
- if (_PM_key15Handler) {
- restoreISR(0x15, _PM_prevKey15, _PM_prevRealKey15);
- _PM_key15Handler = NULL;
- }
-}
-
-void PMAPI PM_installAltBreakHandler(PM_breakHandler bh)
-{
- static int ctrlCFlag,ctrlBFlag;
-
- _PM_ctrlCPtr = (uchar*)&ctrlCFlag;
- _PM_ctrlBPtr = (uchar*)&ctrlBFlag;
- getISR(0x1B, &_PM_prevBreak, &prevRealBreak);
- getISR(0x23, &_PM_prevCtrlC, &prevRealCtrlC);
- _PM_breakHandler = bh;
- setISR(0x1B, _PM_breakISR);
- setISR(0x23, _PM_ctrlCISR);
-}
-
-void PMAPI PM_installBreakHandler(void)
-{
- PM_installAltBreakHandler(NULL);
-}
-
-void PMAPI PM_restoreBreakHandler(void)
-{
- if (_PM_prevBreak.sel) {
- restoreISR(0x1B, _PM_prevBreak, prevRealBreak);
- restoreISR(0x23, _PM_prevCtrlC, prevRealCtrlC);
- _PM_prevBreak.sel = 0;
- _PM_breakHandler = NULL;
- }
-}
-
-void PMAPI PM_installAltCriticalHandler(PM_criticalHandler ch)
-{
- static short critBuf[2];
-
- _PM_critPtr = (uchar*)critBuf;
- getISR(0x24, &_PM_prevCritical, &prevRealCritical);
- _PM_critHandler = ch;
- setISR(0x24, _PM_criticalISR);
-}
-
-void PMAPI PM_installCriticalHandler(void)
-{
- PM_installAltCriticalHandler(NULL);
-}
-
-void PMAPI PM_restoreCriticalHandler(void)
-{
- if (_PM_prevCritical.sel) {
- restoreISR(0x24, _PM_prevCritical, prevRealCritical);
- _PM_prevCritical.sel = 0;
- _PM_critHandler = NULL;
- }
-}
-
-int PMAPI PM_lockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
- return (_dx_lock_pgsn(p,len) == 0);
-}
-
-int PMAPI PM_unlockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
- return (_dx_ulock_pgsn(p,len) == 0);
-}
-
-int PMAPI PM_lockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
- CONFIG_INF config;
- FARPTR fp;
-
- _dx_config_inf(&config, (UCHAR*)&config);
- FP_SET(fp,p,config.c_cs_sel);
- return (_dx_lock_pgs(fp,len) == 0);
-}
-
-int PMAPI PM_unlockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
- CONFIG_INF config;
- FARPTR fp;
-
- _dx_config_inf(&config, (UCHAR*)&config);
- FP_SET(fp,p,config.c_cs_sel);
- return (_dx_ulock_pgs(fp,len) == 0);
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* Symantec C++ DOSX and FlashTek X-32/X-32VM support */
-/*-------------------------------------------------------------------------*/
-
-#if defined(DOSX) || defined(X32VM)
-
-#ifdef X32VM
-#include <x32.h>
-#endif
-
-static long prevRealBreak; /* Previous real mode break handler */
-static long prevRealCtrlC; /* Previous real mode CtrlC handler */
-static long prevRealCritical; /* Prev real mode critical handler */
-
-static uint mouseSel = 0,mouseOff;
-
-/* The following real mode routine is used to call a 32 bit protected
- * mode FAR function from real mode. We use this for passing up control
- * from the real mode mouse callback to our protected mode code.
- */
-
-static char realHandler[] = { /* Real mode code generic handler */
- 0x00,0x00,0x00,0x00, /* __PM_callProtp */
- 0x00,0x00, /* __PM_protCS */
- 0x00,0x00,0x00,0x00, /* __PM_protHandler */
- 0x1E, /* push ds */
- 0x6A,0x00, /* push 0 */
- 0x6A,0x00, /* push 0 */
- 0x2E,0xFF,0x36,0x04,0x00, /* push [cs:__PM_protCS] */
- 0x66,0x2E,0xFF,0x36,0x06,0x00, /* push [cs:__PM_protHandler] */
- 0x2E,0xFF,0x1E,0x00,0x00, /* call [cs:__PM_callProtp] */
- 0x83,0xC4,0x0A, /* add sp,10 */
- 0x1F, /* pop ds */
- 0xCB, /* retf */
- };
-
-/* The following functions installs the above realmode callback mechanism
- * in real mode memory for calling the protected mode routine.
- */
-
-int installCallback(void (PMAPI *pmCB)(),uint *psel, uint *poff,
- uint *rseg, uint *roff)
-{
- PMREGS regs;
- PMSREGS sregs;
-
- regs.x.ax = 0x250D;
- PM_segread(&sregs);
- PM_int386x(0x21,&regs,&regs,&sregs); /* Get RM callback address */
-
- /* Fill in the values in the real mode code segment so that it will
- * call the correct routine.
- */
- *((ulong*)&realHandler[0]) = regs.e.eax;
- *((ushort*)&realHandler[4]) = sregs.cs;
- *((ulong*)&realHandler[6]) = (ulong)pmCB;
-
- /* Copy the real mode handler to real mode memory (only allocate the
- * buffer once since we cant dealloate it with X32).
- */
- if (*psel == 0) {
- if (!PM_allocRealSeg(sizeof(realHandler),psel,poff,rseg,roff))
- return 0;
- }
- PM_memcpyfn(*psel,*poff,realHandler,sizeof(realHandler));
-
- /* Skip past global variables in real mode code segment */
- *roff += 0x0A;
- return 1;
-}
-
-int PMAPI PM_setMouseHandler(int mask, PM_mouseHandler mh)
-{
- RMREGS regs;
- RMSREGS sregs;
- uint rseg,roff;
-
- lockPMHandlers(); /* Ensure our handlers are locked */
-
- if (!installCallback(_PM_mouseISR, &mouseSel, &mouseOff, &rseg, &roff))
- return 0;
- _PM_mouseHandler = mh;
-
- /* Install the real mode mouse handler */
- sregs.es = rseg;
- regs.x.dx = roff;
- regs.x.cx = _PM_mouseMask = mask;
- regs.x.ax = 0xC;
- PM_int86x(0x33, &regs, &regs, &sregs);
- return 1;
-}
-
-void PMAPI PM_restoreMouseHandler(void)
-{
- RMREGS regs;
-
- if (_PM_mouseHandler) {
- regs.x.ax = 33;
- PM_int86(0x33, &regs, &regs);
- _PM_mouseHandler = NULL;
- }
-}
-
-void PMAPI PM_getPMvect(int intno, PMFARPTR *isr)
-{
- PMREGS regs;
- PMSREGS sregs;
-
- PM_segread(&sregs);
- regs.x.ax = 0x2502; /* Get PM interrupt vector */
- regs.x.cx = intno;
- PM_int386x(0x21, &regs, &regs, &sregs);
- isr->sel = sregs.es;
- isr->off = regs.e.ebx;
-}
-
-void PMAPI PM_setPMvect(int intno, PM_intHandler isr)
-{
- PMFARPTR pmisr;
- PMSREGS sregs;
-
- PM_saveDS();
- PM_segread(&sregs);
- pmisr.sel = sregs.cs;
- pmisr.off = (uint)isr;
- PM_restorePMvect(intno, pmisr);
-}
-
-void PMAPI PM_restorePMvect(int intno, PMFARPTR isr)
-{
- PMREGS regs;
- PMSREGS sregs;
-
- PM_segread(&sregs);
- regs.x.ax = 0x2505; /* Set PM interrupt vector */
- regs.x.cx = intno;
- sregs.ds = isr.sel;
- regs.e.edx = isr.off;
- PM_int386x(0x21, &regs, &regs, &sregs);
-}
-
-static void getISR(int intno, PMFARPTR *pmisr, long *realisr)
-{
- PM_getPMvect(intno,pmisr);
- _PM_getRMvect(intno,realisr);
-}
-
-static void restoreISR(int intno, PMFARPTR pmisr, long realisr)
-{
- PMREGS regs;
- PMSREGS sregs;
-
- PM_segread(&sregs);
- regs.x.ax = 0x2507; /* Set real and PM vectors */
- regs.x.cx = intno;
- sregs.ds = pmisr.sel;
- regs.e.edx = pmisr.off;
- regs.e.ebx = realisr;
- PM_int386x(0x21, &regs, &regs, &sregs);
-}
-
-static void setISR(int intno, void *isr)
-{
- PMREGS regs;
- PMSREGS sregs;
-
- lockPMHandlers(); /* Ensure our handlers are locked */
-
- PM_segread(&sregs);
- regs.x.ax = 0x2506; /* Hook real and protected vectors */
- regs.x.cx = intno;
- sregs.ds = sregs.cs;
- regs.e.edx = (uint)isr;
- PM_int386x(0x21, &regs, &regs, &sregs);
-}
-
-void PMAPI PM_setTimerHandler(PM_intHandler th)
-{
- getISR(0x8, &_PM_prevTimer, &_PM_prevRealTimer);
- _PM_timerHandler = th;
- setISR(0x8, _PM_timerISR);
-}
-
-void PMAPI PM_restoreTimerHandler(void)
-{
- if (_PM_timerHandler) {
- restoreISR(0x8, _PM_prevTimer, _PM_prevRealTimer);
- _PM_timerHandler = NULL;
- }
-}
-
-ibool PMAPI PM_setRealTimeClockHandler(PM_intHandler th,int frequency)
-{
- /* Save the old CMOS real time clock values */
- _PM_oldCMOSRegA = _PM_readCMOS(0x0A);
- _PM_oldCMOSRegB = _PM_readCMOS(0x0B);
-
- /* Set the real time clock interrupt handler */
- getISR(0x70, &_PM_prevRTC, &_PM_prevRealRTC);
- _PM_rtcHandler = th;
- setISR(0x70, _PM_rtcISR);
-
- /* Program the real time clock default frequency */
- PM_setRealTimeClockFrequency(frequency);
-
- /* Unmask IRQ8 in the PIC2 */
- _PM_oldRTCPIC2 = PM_inpb(0xA1);
- PM_outpb(0xA1,_PM_oldRTCPIC2 & 0xFE);
- return true;
-}
-
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
- if (_PM_rtcHandler) {
- /* Restore CMOS registers and mask RTC clock */
- _PM_writeCMOS(0x0A,_PM_oldCMOSRegA);
- _PM_writeCMOS(0x0B,_PM_oldCMOSRegB);
- PM_outpb(0xA1,(PM_inpb(0xA1) & 0xFE) | (_PM_oldRTCPIC2 & ~0xFE));
-
- /* Restore the interrupt vector */
- restoreISR(0x70, _PM_prevRTC, _PM_prevRealRTC);
- _PM_rtcHandler = NULL;
- }
-}
-
-void PMAPI PM_setKeyHandler(PM_intHandler kh)
-{
- getISR(0x9, &_PM_prevKey, &_PM_prevRealKey);
- _PM_keyHandler = kh;
- setISR(0x9, _PM_keyISR);
-}
-
-void PMAPI PM_restoreKeyHandler(void)
-{
- if (_PM_keyHandler) {
- restoreISR(0x9, _PM_prevKey, _PM_prevRealKey);
- _PM_keyHandler = NULL;
- }
-}
-
-void PMAPI PM_setKey15Handler(PM_key15Handler kh)
-{
- getISR(0x15, &_PM_prevKey15, &_PM_prevRealKey15);
- _PM_key15Handler = kh;
- setISR(0x15, _PM_key15ISR);
-}
-
-void PMAPI PM_restoreKey15Handler(void)
-{
- if (_PM_key15Handler) {
- restoreISR(0x15, _PM_prevKey15, _PM_prevRealKey15);
- _PM_key15Handler = NULL;
- }
-}
-
-void PMAPI PM_installAltBreakHandler(PM_breakHandler bh)
-{
- static int ctrlCFlag,ctrlBFlag;
-
- _PM_ctrlCPtr = (uchar*)&ctrlCFlag;
- _PM_ctrlBPtr = (uchar*)&ctrlBFlag;
- getISR(0x1B, &_PM_prevBreak, &prevRealBreak);
- getISR(0x23, &_PM_prevCtrlC, &prevRealCtrlC);
- _PM_breakHandler = bh;
- setISR(0x1B, _PM_breakISR);
- setISR(0x23, _PM_ctrlCISR);
-}
-
-void PMAPI PM_installBreakHandler(void)
-{
- PM_installAltBreakHandler(NULL);
-}
-
-void PMAPI PM_restoreBreakHandler(void)
-{
- if (_PM_prevBreak.sel) {
- restoreISR(0x1B, _PM_prevBreak, prevRealBreak);
- restoreISR(0x23, _PM_prevCtrlC, prevRealCtrlC);
- _PM_prevBreak.sel = 0;
- _PM_breakHandler = NULL;
- }
-}
-
-void PMAPI PM_installAltCriticalHandler(PM_criticalHandler ch)
-{
- static short critBuf[2];
-
- _PM_critPtr = (uchar*)critBuf;
- getISR(0x24, &_PM_prevCritical, &prevRealCritical);
- _PM_critHandler = ch;
- setISR(0x24, _PM_criticalISR);
-}
-
-void PMAPI PM_installCriticalHandler(void)
-{
- PM_installAltCriticalHandler(NULL);
-}
-
-void PMAPI PM_restoreCriticalHandler(void)
-{
- if (_PM_prevCritical.sel) {
- restoreISR(0x24, _PM_prevCritical, prevRealCritical);
- _PM_prevCritical.sel = 0;
- _PM_critHandler = NULL;
- }
-}
-
-int PMAPI PM_lockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
- return (_x386_memlock(p,len) == 0);
-}
-
-int PMAPI PM_unlockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
- return (_x386_memunlock(p,len) == 0);
-}
-
-int PMAPI PM_lockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
- return (_x386_memlock(p,len) == 0);
-}
-
-int PMAPI PM_unlockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
- return (_x386_memunlock(p,len) == 0);
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* Borland's DPMI32 DOS Power Pack Extender support. */
-/*-------------------------------------------------------------------------*/
-
-#ifdef DPMI32
-#define GENERIC_DPMI32 /* Use generic 32 bit DPMI routines */
-
-void PMAPI PM_getPMvect(int intno, PMFARPTR *isr)
-{
- PMREGS regs;
-
- regs.x.ax = 0x204;
- regs.h.bl = intno;
- PM_int386(0x31,&regs,&regs);
- isr->sel = regs.x.cx;
- isr->off = regs.e.edx;
-}
-
-void PMAPI PM_setPMvect(int intno, PM_intHandler isr)
-{
- PMSREGS sregs;
- PMREGS regs;
-
- PM_saveDS();
- regs.x.ax = 0x205; /* Set protected mode vector */
- regs.h.bl = intno;
- PM_segread(&sregs);
- regs.x.cx = sregs.cs;
- regs.e.edx = (uint)isr;
- PM_int386(0x31,&regs,&regs);
-}
-
-void PMAPI PM_restorePMvect(int intno, PMFARPTR isr)
-{
- PMREGS regs;
-
- regs.x.ax = 0x205;
- regs.h.bl = intno;
- regs.x.cx = isr.sel;
- regs.e.edx = isr.off;
- PM_int386(0x31,&regs,&regs);
-}
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* Watcom C/C++ with Rational DOS/4GW support. */
-/*-------------------------------------------------------------------------*/
-
-#ifdef DOS4GW
-#define GENERIC_DPMI32 /* Use generic 32 bit DPMI routines */
-
-#define MOUSE_SUPPORTED /* DOS4GW directly supports mouse */
-
-/* We use the normal DOS services to save and restore interrupts handlers
- * for Watcom C++, because using the direct DPMI functions does not
- * appear to work properly. At least if we use the DPMI functions, we
- * dont get the auto-passup feature that we need to correctly trap
- * real and protected mode interrupts without installing Bi-model
- * interrupt handlers.
- */
-
-void PMAPI PM_getPMvect(int intno, PMFARPTR *isr)
-{
- PMREGS regs;
- PMSREGS sregs;
-
- PM_segread(&sregs);
- regs.h.ah = 0x35;
- regs.h.al = intno;
- PM_int386x(0x21,&regs,&regs,&sregs);
- isr->sel = sregs.es;
- isr->off = regs.e.ebx;
-}
-
-void PMAPI PM_setPMvect(int intno, PM_intHandler isr)
-{
- PMREGS regs;
- PMSREGS sregs;
-
- PM_saveDS();
- PM_segread(&sregs);
- regs.h.ah = 0x25;
- regs.h.al = intno;
- sregs.ds = sregs.cs;
- regs.e.edx = (uint)isr;
- PM_int386x(0x21,&regs,&regs,&sregs);
-}
-
-void PMAPI PM_restorePMvect(int intno, PMFARPTR isr)
-{
- PMREGS regs;
- PMSREGS sregs;
-
- PM_segread(&sregs);
- regs.h.ah = 0x25;
- regs.h.al = intno;
- sregs.ds = isr.sel;
- regs.e.edx = isr.off;
- PM_int386x(0x21,&regs,&regs,&sregs);
-}
-
-int PMAPI PM_setMouseHandler(int mask, PM_mouseHandler mh)
-{
- lockPMHandlers(); /* Ensure our handlers are locked */
-
- _PM_mouseHandler = mh;
- _PM_setMouseHandler(_PM_mouseMask = mask);
- return 1;
-}
-
-void PMAPI PM_restoreMouseHandler(void)
-{
- PMREGS regs;
-
- if (_PM_mouseHandler) {
- regs.x.ax = 33;
- PM_int386(0x33, &regs, &regs);
- _PM_mouseHandler = NULL;
- }
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* DJGPP port of GNU C++ support. */
-/*-------------------------------------------------------------------------*/
-
-#ifdef DJGPP
-#define GENERIC_DPMI32 /* Use generic 32 bit DPMI routines */
-
-void PMAPI PM_getPMvect(int intno, PMFARPTR *isr)
-{
- PMREGS regs;
-
- regs.x.ax = 0x204;
- regs.h.bl = intno;
- PM_int386(0x31,&regs,&regs);
- isr->sel = regs.x.cx;
- isr->off = regs.e.edx;
-}
-
-void PMAPI PM_setPMvect(int intno, PM_intHandler isr)
-{
- PMSREGS sregs;
- PMREGS regs;
-
- PM_saveDS();
- regs.x.ax = 0x205; /* Set protected mode vector */
- regs.h.bl = intno;
- PM_segread(&sregs);
- regs.x.cx = sregs.cs;
- regs.e.edx = (uint)isr;
- PM_int386(0x31,&regs,&regs);
-}
-
-void PMAPI PM_restorePMvect(int intno, PMFARPTR isr)
-{
- PMREGS regs;
-
- regs.x.ax = 0x205;
- regs.h.bl = intno;
- regs.x.cx = isr.sel;
- regs.e.edx = isr.off;
- PM_int386(0x31,&regs,&regs);
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* Generic 32 bit DPMI routines */
-/*-------------------------------------------------------------------------*/
-
-#if defined(GENERIC_DPMI32)
-
-static long prevRealBreak; /* Previous real mode break handler */
-static long prevRealCtrlC; /* Previous real mode CtrlC handler */
-static long prevRealCritical; /* Prev real mode critical handler */
-
-#ifndef MOUSE_SUPPORTED
-
-/* The following real mode routine is used to call a 32 bit protected
- * mode FAR function from real mode. We use this for passing up control
- * from the real mode mouse callback to our protected mode code.
- */
-
-static long mouseRMCB; /* Mouse real mode callback address */
-static uchar *mousePtr;
-static char mouseRegs[0x32]; /* Real mode regs for mouse callback */
-static uchar mouseHandler[] = {
- 0x00,0x00,0x00,0x00, /* _realRMCB */
- 0x2E,0xFF,0x1E,0x00,0x00, /* call [cs:_realRMCB] */
- 0xCB, /* retf */
- };
-
-int PMAPI PM_setMouseHandler(int mask, PM_mouseHandler mh)
-{
- RMREGS regs;
- RMSREGS sregs;
- uint rseg,roff;
-
- lockPMHandlers(); /* Ensure our handlers are locked */
-
- /* Copy the real mode handler to real mode memory */
- if ((mousePtr = PM_allocRealSeg(sizeof(mouseHandler),&rseg,&roff)) == NULL)
- return 0;
- memcpy(mousePtr,mouseHandler,sizeof(mouseHandler));
- if (!_DPMI_allocateCallback(_PM_mousePMCB, mouseRegs, &mouseRMCB))
- PM_fatalError("Unable to allocate real mode callback!\n");
- PM_setLong(mousePtr,mouseRMCB);
-
- /* Install the real mode mouse handler */
- _PM_mouseHandler = mh;
- sregs.es = rseg;
- regs.x.dx = roff+4;
- regs.x.cx = _PM_mouseMask = mask;
- regs.x.ax = 0xC;
- PM_int86x(0x33, &regs, &regs, &sregs);
- return 1;
-}
-
-void PMAPI PM_restoreMouseHandler(void)
-{
- RMREGS regs;
-
- if (_PM_mouseHandler) {
- regs.x.ax = 33;
- PM_int86(0x33, &regs, &regs);
- PM_freeRealSeg(mousePtr);
- _DPMI_freeCallback(mouseRMCB);
- _PM_mouseHandler = NULL;
- }
-}
-
-#endif
-
-static void getISR(int intno, PMFARPTR *pmisr, long *realisr)
-{
- PM_getPMvect(intno,pmisr);
- _PM_getRMvect(intno,realisr);
-}
-
-static void restoreISR(int intno, PMFARPTR pmisr, long realisr)
-{
- _PM_setRMvect(intno,realisr);
- PM_restorePMvect(intno,pmisr);
-}
-
-static void setISR(int intno, void (* PMAPI pmisr)())
-{
- lockPMHandlers(); /* Ensure our handlers are locked */
- PM_setPMvect(intno,pmisr);
-}
-
-void PMAPI PM_setTimerHandler(PM_intHandler th)
-{
- getISR(0x8, &_PM_prevTimer, &_PM_prevRealTimer);
- _PM_timerHandler = th;
- setISR(0x8, _PM_timerISR);
-}
-
-void PMAPI PM_restoreTimerHandler(void)
-{
- if (_PM_timerHandler) {
- restoreISR(0x8, _PM_prevTimer, _PM_prevRealTimer);
- _PM_timerHandler = NULL;
- }
-}
-
-ibool PMAPI PM_setRealTimeClockHandler(PM_intHandler th,int frequency)
-{
- /* Save the old CMOS real time clock values */
- _PM_oldCMOSRegA = _PM_readCMOS(0x0A);
- _PM_oldCMOSRegB = _PM_readCMOS(0x0B);
-
- /* Set the real time clock interrupt handler */
- getISR(0x70, &_PM_prevRTC, &_PM_prevRealRTC);
- _PM_rtcHandler = th;
- setISR(0x70, _PM_rtcISR);
-
- /* Program the real time clock default frequency */
- PM_setRealTimeClockFrequency(frequency);
-
- /* Unmask IRQ8 in the PIC2 */
- _PM_oldRTCPIC2 = PM_inpb(0xA1);
- PM_outpb(0xA1,_PM_oldRTCPIC2 & 0xFE);
- return true;
-}
-
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
- if (_PM_rtcHandler) {
- /* Restore CMOS registers and mask RTC clock */
- _PM_writeCMOS(0x0A,_PM_oldCMOSRegA);
- _PM_writeCMOS(0x0B,_PM_oldCMOSRegB);
- PM_outpb(0xA1,(PM_inpb(0xA1) & 0xFE) | (_PM_oldRTCPIC2 & ~0xFE));
-
- /* Restore the interrupt vector */
- restoreISR(0x70, _PM_prevRTC, _PM_prevRealRTC);
- _PM_rtcHandler = NULL;
- }
-}
-
-PM_IRQHandle PMAPI PM_setIRQHandler(
- int IRQ,
- PM_irqHandler ih)
-{
- int thunkSize,PICmask,chainPrevious;
- ulong offsetAdjust;
- _PM_IRQHandle *handle;
-
- thunkSize = (ulong)_PM_irqISRTemplateEnd - (ulong)_PM_irqISRTemplate;
- if ((handle = PM_malloc(sizeof(_PM_IRQHandle) + thunkSize)) == NULL)
- return NULL;
- handle->IRQ = IRQ;
- handle->prevPIC = PM_inpb(0x21);
- handle->prevPIC2 = PM_inpb(0xA1);
- if (IRQ < 8) {
- handle->IRQVect = (IRQ + 8);
- PICmask = (1 << IRQ);
- chainPrevious = ((handle->prevPIC & PICmask) == 0);
- }
- else {
- handle->IRQVect = (0x60 + IRQ + 8);
- PICmask = ((1 << IRQ) | 0x4);
- chainPrevious = ((handle->prevPIC2 & (PICmask >> 8)) == 0);
- }
-
- /* Copy and setup the assembler thunk */
- offsetAdjust = (ulong)handle->thunk - (ulong)_PM_irqISRTemplate;
- memcpy(handle->thunk,_PM_irqISRTemplate,thunkSize);
- *((ulong*)&handle->thunk[2]) = offsetAdjust;
- *((ulong*)&handle->thunk[11+0]) = (ulong)ih;
- if (chainPrevious) {
- *((ulong*)&handle->thunk[11+4]) = handle->prevHandler.off;
- *((ulong*)&handle->thunk[11+8]) = handle->prevHandler.sel;
- }
- else {
- *((ulong*)&handle->thunk[11+4]) = 0;
- *((ulong*)&handle->thunk[11+8]) = 0;
- }
- *((ulong*)&handle->thunk[11+12]) = IRQ;
-
- /* Set the real time clock interrupt handler */
- getISR(handle->IRQVect, &handle->prevHandler, &handle->prevRealhandler);
- setISR(handle->IRQVect, (PM_intHandler)handle->thunk);
-
- /* Unmask the IRQ in the PIC */
- PM_outpb(0xA1,handle->prevPIC2 & ~(PICmask >> 8));
- PM_outpb(0x21,handle->prevPIC & ~PICmask);
- return handle;
-}
-
-void PMAPI PM_restoreIRQHandler(
- PM_IRQHandle irqHandle)
-{
- int PICmask;
- _PM_IRQHandle *handle = irqHandle;
-
- /* Restore PIC mask for the interrupt */
- if (handle->IRQ < 8)
- PICmask = (1 << handle->IRQ);
- else
- PICmask = ((1 << handle->IRQ) | 0x4);
- PM_outpb(0xA1,(PM_inpb(0xA1) & ~(PICmask >> 8)) | (handle->prevPIC2 & (PICmask >> 8)));
- PM_outpb(0x21,(PM_inpb(0x21) & ~PICmask) | (handle->prevPIC & PICmask));
-
- /* Restore the interrupt vector */
- restoreISR(handle->IRQVect, handle->prevHandler, handle->prevRealhandler);
-
- /* Finally free the thunk */
- PM_free(handle);
-}
-
-void PMAPI PM_setKeyHandler(PM_intHandler kh)
-{
- getISR(0x9, &_PM_prevKey, &_PM_prevRealKey);
- _PM_keyHandler = kh;
- setISR(0x9, _PM_keyISR);
-}
-
-void PMAPI PM_restoreKeyHandler(void)
-{
- if (_PM_keyHandler) {
- restoreISR(0x9, _PM_prevKey, _PM_prevRealKey);
- _PM_keyHandler = NULL;
- }
-}
-
-void PMAPI PM_setKey15Handler(PM_key15Handler kh)
-{
- getISR(0x15, &_PM_prevKey15, &_PM_prevRealKey15);
- _PM_key15Handler = kh;
- setISR(0x15, _PM_key15ISR);
-}
-
-void PMAPI PM_restoreKey15Handler(void)
-{
- if (_PM_key15Handler) {
- restoreISR(0x15, _PM_prevKey15, _PM_prevRealKey15);
- _PM_key15Handler = NULL;
- }
-}
-
-/* Real mode Ctrl-C and Ctrl-Break handler. This handler simply sets a
- * flag in the real mode code segment and exit. We save the location
- * of this flag in real mode memory so that both the real mode and
- * protected mode code will be modifying the same flags.
- */
-
-#ifndef DOS4GW
-static uchar ctrlHandler[] = {
- 0x00,0x00,0x00,0x00, /* ctrlBFlag */
- 0x66,0x2E,0xC7,0x06,0x00,0x00,
- 0x01,0x00,0x00,0x00, /* mov [cs:ctrlBFlag],1 */
- 0xCF, /* iretf */
- };
-#endif
-
-void PMAPI PM_installAltBreakHandler(PM_breakHandler bh)
-{
-#ifndef DOS4GW
- uint rseg,roff;
-#else
- static int ctrlCFlag,ctrlBFlag;
-
- _PM_ctrlCPtr = (uchar*)&ctrlCFlag;
- _PM_ctrlBPtr = (uchar*)&ctrlBFlag;
-#endif
-
- getISR(0x1B, &_PM_prevBreak, &prevRealBreak);
- getISR(0x23, &_PM_prevCtrlC, &prevRealCtrlC);
- _PM_breakHandler = bh;
- setISR(0x1B, _PM_breakISR);
- setISR(0x23, _PM_ctrlCISR);
-
-#ifndef DOS4GW
- /* Hook the real mode vectors for these handlers, as these are not
- * normally reflected by the DPMI server up to protected mode
- */
- _PM_ctrlBPtr = PM_allocRealSeg(sizeof(ctrlHandler)*2, &rseg, &roff);
- memcpy(_PM_ctrlBPtr,ctrlHandler,sizeof(ctrlHandler));
- memcpy(_PM_ctrlBPtr+sizeof(ctrlHandler),ctrlHandler,sizeof(ctrlHandler));
- _PM_ctrlCPtr = _PM_ctrlBPtr + sizeof(ctrlHandler);
- _PM_setRMvect(0x1B,((long)rseg << 16) | (roff+4));
- _PM_setRMvect(0x23,((long)rseg << 16) | (roff+sizeof(ctrlHandler)+4));
-#endif
-}
-
-void PMAPI PM_installBreakHandler(void)
-{
- PM_installAltBreakHandler(NULL);
-}
-
-void PMAPI PM_restoreBreakHandler(void)
-{
- if (_PM_prevBreak.sel) {
- restoreISR(0x1B, _PM_prevBreak, prevRealBreak);
- restoreISR(0x23, _PM_prevCtrlC, prevRealCtrlC);
- _PM_prevBreak.sel = 0;
- _PM_breakHandler = NULL;
-#ifndef DOS4GW
- PM_freeRealSeg(_PM_ctrlBPtr);
-#endif
- }
-}
-
-/* Real mode Critical Error handler. This handler simply saves the AX and
- * DI values in the real mode code segment and exits. We save the location
- * of this flag in real mode memory so that both the real mode and
- * protected mode code will be modifying the same flags.
- */
-
-#ifndef DOS4GW
-static uchar criticalHandler[] = {
- 0x00,0x00, /* axCode */
- 0x00,0x00, /* diCode */
- 0x2E,0xA3,0x00,0x00, /* mov [cs:axCode],ax */
- 0x2E,0x89,0x3E,0x02,0x00, /* mov [cs:diCode],di */
- 0xB8,0x03,0x00, /* mov ax,3 */
- 0xCF, /* iretf */
- };
-#endif
-
-void PMAPI PM_installAltCriticalHandler(PM_criticalHandler ch)
-{
-#ifndef DOS4GW
- uint rseg,roff;
-#else
- static short critBuf[2];
-
- _PM_critPtr = (uchar*)critBuf;
-#endif
-
- getISR(0x24, &_PM_prevCritical, &prevRealCritical);
- _PM_critHandler = ch;
- setISR(0x24, _PM_criticalISR);
-
-#ifndef DOS4GW
- /* Hook the real mode vector, as this is not normally reflected by the
- * DPMI server up to protected mode.
- */
- _PM_critPtr = PM_allocRealSeg(sizeof(criticalHandler)*2, &rseg, &roff);
- memcpy(_PM_critPtr,criticalHandler,sizeof(criticalHandler));
- _PM_setRMvect(0x24,((long)rseg << 16) | (roff+4));
-#endif
-}
-
-void PMAPI PM_installCriticalHandler(void)
-{
- PM_installAltCriticalHandler(NULL);
-}
-
-void PMAPI PM_restoreCriticalHandler(void)
-{
- if (_PM_prevCritical.sel) {
- restoreISR(0x24, _PM_prevCritical, prevRealCritical);
- PM_freeRealSeg(_PM_critPtr);
- _PM_prevCritical.sel = 0;
- _PM_critHandler = NULL;
- }
-}
-
-int PMAPI PM_lockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
- PMSREGS sregs;
- PM_segread(&sregs);
- return DPMI_lockLinearPages((uint)p + DPMI_getSelectorBase(sregs.ds),len);
-}
-
-int PMAPI PM_unlockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
- PMSREGS sregs;
- PM_segread(&sregs);
- return DPMI_unlockLinearPages((uint)p + DPMI_getSelectorBase(sregs.ds),len);
-}
-
-int PMAPI PM_lockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
- PMSREGS sregs;
- PM_segread(&sregs);
- return DPMI_lockLinearPages((uint)p + DPMI_getSelectorBase(sregs.cs),len);
-}
-
-int PMAPI PM_unlockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
- PMSREGS sregs;
- PM_segread(&sregs);
- return DPMI_unlockLinearPages((uint)p + DPMI_getSelectorBase(sregs.cs),len);
-}
-
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/dos/vflat.c
deleted file mode 100644
index c3e9b6c33f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/vflat.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit DOS
-*
-* Description: Main C module for the VFlat framebuffer routines. The page
-* fault handler is always installed to handle up to a 4Mb
-* framebuffer with a window size of 4Kb or 64Kb in size.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include <stdlib.h>
-#include <dos.h>
-
-/*-------------------------------------------------------------------------*/
-/* DOS4G/W, PMODE/W and CauseWay support. */
-/*-------------------------------------------------------------------------*/
-
-#if defined(DOS4GW)
-
-#define VFLAT_START_ADDR 0xF0000000U
-#define VFLAT_END_ADDR 0xF03FFFFFU
-#define VFLAT_LIMIT (VFLAT_END_ADDR - VFLAT_START_ADDR)
-#define PAGE_PRESENT 1
-#define PAGE_NOTPRESENT 0
-#define PAGE_READ 0
-#define PAGE_WRITE 2
-
-PRIVATE ibool installed = false;
-PRIVATE ibool haveDPMI = false;
-PUBLIC ibool _ASMAPI VF_haveCauseWay = false;
-PUBLIC uchar * _ASMAPI VF_zeroPtr = NULL;
-
-/* Low level assembler code */
-
-int _ASMAPI InitPaging(void);
-void _ASMAPI ClosePaging(void);
-void _ASMAPI MapPhysical2Linear(ulong pAddr, ulong lAddr, int pages, int flags);
-void _ASMAPI InstallFaultHandler(ulong baseAddr,int bankSize);
-void _ASMAPI RemoveFaultHandler(void);
-void _ASMAPI InstallBankFunc(int codeLen,void *bankFunc);
-
-void * _ASMAPI VF_malloc(uint size)
-{ return PM_malloc(size); }
-
-void _ASMAPI VF_free(void *p)
-{ PM_free(p); }
-
-PRIVATE ibool CheckDPMI(void)
-/****************************************************************************
-*
-* Function: CheckDPMI
-* Returns: True if we are running under DPMI
-*
-****************************************************************************/
-{
- PMREGS regs;
-
- if (haveDPMI)
- return true;
-
- /* Check if we are running under DPMI in which case we will not be
- * able to install our page fault handlers. We can however use the
- * DVA.386 or VFLATD.386 virtual device drivers if they are present.
- */
- regs.x.ax = 0xFF00;
- PM_int386(0x31,&regs,&regs);
- if (!regs.x.cflag && (regs.e.edi & 8))
- return (haveDPMI = true);
- return false;
-}
-
-ibool PMAPI VF_available(void)
-/****************************************************************************
-*
-* Function: VF_available
-* Returns: True if virtual buffer is available, false if not.
-*
-****************************************************************************/
-{
- if (!VF_zeroPtr)
- VF_zeroPtr = PM_mapPhysicalAddr(0,0xFFFFFFFF,true);
- if (CheckDPMI())
- return false;
-
- /* Standard DOS4GW, PMODE/W and Causeway */
- if (InitPaging() == -1)
- return false;
- ClosePaging();
- return true;
-}
-
-void * PMAPI InitDPMI(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-/****************************************************************************
-*
-* Function: InitDOS4GW
-* Parameters: baseAddr - Base address of framebuffer bank window
-* bankSize - Physical size of banks in Kb (4 or 64)
-* codeLen - Length of 32 bit bank switch function
-* bankFunc - Pointer to protected mode bank function
-* Returns: Near pointer to virtual framebuffer, or NULL on failure.
-*
-* Description: Installs the virtual linear framebuffer handling for
-* DPMI environments. This requires the DVA.386 or VFLATD.386
-* virtual device drivers to be installed and functioning.
-*
-****************************************************************************/
-{
- (void)baseAddr;
- (void)bankSize;
- (void)codeLen;
- (void)bankFunc;
- return NULL;
-}
-
-void * PMAPI InitDOS4GW(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-/****************************************************************************
-*
-* Function: InitDOS4GW
-* Parameters: baseAddr - Base address of framebuffer bank window
-* bankSize - Physical size of banks in Kb (4 or 64)
-* codeLen - Length of 32 bit bank switch function
-* bankFunc - Pointer to protected mode bank function
-* Returns: Near pointer to virtual framebuffer, or NULL on failure.
-*
-* Description: Installs the virtual linear framebuffer handling for
-* the DOS4GW extender.
-*
-****************************************************************************/
-{
- int i;
-
- if (InitPaging() == -1)
- return NULL; /* Cannot do hardware paging! */
-
- /* Map 4MB of video memory into linear address space (read/write) */
- if (bankSize == 64) {
- for (i = 0; i < 64; i++) {
- MapPhysical2Linear(baseAddr,VFLAT_START_ADDR+(i<<16),16,
- PAGE_WRITE | PAGE_NOTPRESENT);
- }
- }
- else {
- for (i = 0; i < 1024; i++) {
- MapPhysical2Linear(baseAddr,VFLAT_START_ADDR+(i<<12),1,
- PAGE_WRITE | PAGE_NOTPRESENT);
- }
- }
-
- /* Install our page fault handler and banks switch function */
- InstallFaultHandler(baseAddr,bankSize);
- InstallBankFunc(codeLen,bankFunc);
- installed = true;
- return (void*)VFLAT_START_ADDR;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-/****************************************************************************
-*
-* Function: VF_init
-* Parameters: baseAddr - Base address of framebuffer bank window
-* bankSize - Physical size of banks in Kb (4 or 64)
-* codeLen - Length of 32 bit bank switch function
-* bankFunc - Pointer to protected mode bank function
-* Returns: Near pointer to virtual framebuffer, or NULL on failure.
-*
-* Description: Installs the virtual linear framebuffer handling.
-*
-****************************************************************************/
-{
- if (installed)
- return (void*)VFLAT_START_ADDR;
- if (codeLen > 100)
- return NULL; /* Bank function is too large! */
- if (!VF_zeroPtr)
- VF_zeroPtr = PM_mapPhysicalAddr(0,0xFFFFFFFF,true);
- if (CheckDPMI())
- return InitDPMI(baseAddr,bankSize,codeLen,bankFunc);
- return InitDOS4GW(baseAddr,bankSize,codeLen,bankFunc);
-}
-
-void PMAPI VF_exit(void)
-/****************************************************************************
-*
-* Function: VF_exit
-*
-* Description: Closes down the virtual framebuffer services and
-* restores the previous page fault handler.
-*
-****************************************************************************/
-{
- if (installed) {
- if (haveDPMI) {
- /* DPMI support */
- }
- else {
- /* Standard DOS4GW and PMODE/W support */
- RemoveFaultHandler();
- ClosePaging();
- }
- installed = false;
- }
-}
-
-/*-------------------------------------------------------------------------*/
-/* Support mapped out for other compilers. */
-/*-------------------------------------------------------------------------*/
-
-#else
-
-ibool PMAPI VF_available(void)
-{
- return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
- (void)baseAddr;
- (void)bankSize;
- (void)codeLen;
- (void)bankFunc;
- return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
-
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/dos/ztimer.c
deleted file mode 100644
index 53ab16cf40..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/dos/ztimer.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: MSDOS
-*
-* Description: OS specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-
-/*---------------------------- Global variables ---------------------------*/
-
-uchar * _VARAPI _ZTimerBIOSPtr;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* External assembler functions */
-
-void _ASMAPI LZ_timerOn(void);
-ulong _ASMAPI LZ_timerLap(void);
-void _ASMAPI LZ_timerOff(void);
-ulong _ASMAPI LZ_timerCount(void);
-void _ASMAPI LZ_disable(void);
-void _ASMAPI LZ_enable(void);
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-void __ZTimerInit(void)
-{
- _ZTimerBIOSPtr = PM_getBIOSPointer();
-}
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOn(tm) LZ_timerOn()
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerLap(tm) LZ_timerLap()
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOff(tm) LZ_timerOff()
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerCount(tm) LZ_timerCount()
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION 54925
-
-/****************************************************************************
-REMARKS:
-Read the Long Period timer value from the BIOS timer tick.
-****************************************************************************/
-static ulong __ULZReadTime(void)
-{
- ulong ticks;
- LZ_disable(); /* Turn of interrupts */
- ticks = PM_getLong(_ZTimerBIOSPtr+0x6C);
- LZ_enable(); /* Turn on interrupts again */
- return ticks;
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{
- if (finish < start)
- finish += 1573040L; /* Number of ticks in 24 hours */
- return finish - start;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/event.c b/board/MAI/bios_emulator/scitech/src/pm/event.c
deleted file mode 100644
index b6f458654b..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/event.c
+++ /dev/null
@@ -1,1115 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Main implementation for the SciTech cross platform event
-* library. This module contains all the generic cross platform
-* code, and pulls in modules specific to each target OS
-* environment.
-*
-****************************************************************************/
-
-#include "event.h"
-#include "pmapi.h"
-#include <time.h>
-#include <signal.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "oshdr.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-#define EVENTQSIZE 100 /* Number of events in event queue */
-#define JOY_NUM_AXES 4 /* Number of joystick axes supported */
-
-static struct {
- int mx,my; /* Current mouse position */
- int head; /* Head of event queue */
- int tail; /* Tail of event queue */
- int freeHead; /* Head of free list */
- int count; /* No. of items currently in queue */
- event_t evtq[EVENTQSIZE]; /* The queue structure itself */
- int oldMove; /* Previous movement event */
- int oldKey; /* Previous key repeat event */
- int oldJoyMove; /* Previous joystick movement event */
- int joyMask; /* Mask of joystick axes present */
- int joyMin[JOY_NUM_AXES];
- int joyCenter[JOY_NUM_AXES];
- int joyMax[JOY_NUM_AXES];
- int joyPrev[JOY_NUM_AXES];
- int joyButState;
- ulong doubleClick;
- ulong autoRepeat;
- ulong autoDelay;
- ulong autoTicks;
- ulong doubleClickThresh;
- ulong firstAuto;
- int autoMouse_x;
- int autoMouse_y;
- event_t downMouse;
- ulong keyModifiers; /* Current keyboard modifiers */
- uchar keyTable[128]; /* Table of key up/down flags */
- ibool allowLEDS; /* True if LEDS should change */
- _EVT_userEventFilter userEventCallback;
- _EVT_mouseMoveHandler mouseMove;
- _EVT_heartBeatCallback heartBeat;
- void *heartBeatParams;
- codepage_t *codePage;
- } EVT;
-
-/*---------------------------- Implementation -----------------------------*/
-
-#if defined(__REALDOS__) || defined(__SMX32__)
-/* {secret} */
-void EVTAPI _EVT_cCodeStart(void) {}
-#endif
-
-/* External assembler functions */
-
-int EVTAPI _EVT_readJoyAxis(int mask,int *axis);
-int EVTAPI _EVT_readJoyButtons(void);
-
-/* Forward declaration */
-
-ulong _EVT_getTicks(void);
-
-/****************************************************************************
-PARAMETERS:
-evt - Event to add to the event queue
-
-REMARKS:
-Adds an event to the event queue by tacking it onto the tail of the event
-queue. This routine assumes that at least one spot is available on the
-freeList for the event to be inserted.
-
-NOTE: Interrupts MUST be OFF while this routine is called to ensure we have
- mutually exclusive access to our internal data structures for
- interrupt driven systems (like under DOS).
-****************************************************************************/
-static void addEvent(
- event_t *evt)
-{
- int evtID;
-
- /* Check for mouse double click events */
- if (evt->what & EVT_MOUSEEVT) {
- EVT.autoMouse_x = evt->where_x;
- EVT.autoMouse_y = evt->where_y;
- if ((evt->what & EVT_MOUSEDOWN) && !(evt->message & EVT_DBLCLICK)) {
- /* Determine if the last mouse event was a double click event */
- uint diff_x = ABS(evt->where_x - EVT.downMouse.where_x);
- uint diff_y = ABS(evt->where_y - EVT.downMouse.where_y);
- if ((evt->message == EVT.downMouse.message)
- && ((evt->when - EVT.downMouse.when) <= EVT.doubleClick)
- && (diff_x <= EVT.doubleClickThresh)
- && (diff_y <= EVT.doubleClickThresh)) {
- evt->message |= EVT_DBLCLICK;
- EVT.downMouse = *evt;
- EVT.downMouse.when = 0;
- }
- else
- EVT.downMouse = *evt;
- EVT.autoTicks = _EVT_getTicks();
- }
- else if (evt->what & EVT_MOUSEUP) {
- EVT.downMouse.what = EVT_NULLEVT;
- EVT.firstAuto = true;
- }
- }
-
- /* Call user supplied callback to modify the event if desired */
- if (EVT.userEventCallback) {
- if (!EVT.userEventCallback(evt))
- return;
- }
-
- /* Get spot to place the event from the free list */
- evtID = EVT.freeHead;
- EVT.freeHead = EVT.evtq[EVT.freeHead].next;
-
- /* Add to the EVT.tail of the event queue */
- evt->next = -1;
- evt->prev = EVT.tail;
- if (EVT.tail != -1)
- EVT.evtq[EVT.tail].next = evtID;
- else
- EVT.head = evtID;
- EVT.tail = evtID;
- EVT.evtq[evtID] = *evt;
- EVT.count++;
-}
-
-/****************************************************************************
-REMARKS:
-Internal function to initialise the event queue to the empty state.
-****************************************************************************/
-static void initEventQueue(void)
-{
- int i;
-
- /* Build free list, and initialize global data structures */
- for (i = 0; i < EVENTQSIZE; i++)
- EVT.evtq[i].next = i+1;
- EVT.evtq[EVENTQSIZE-1].next = -1; /* Terminate list */
- EVT.count = EVT.freeHead = 0;
- EVT.head = EVT.tail = -1;
- EVT.oldMove = -1;
- EVT.oldKey = -1;
- EVT.oldJoyMove = -1;
- EVT.joyButState = 0;
- EVT.mx = EVT.my = 0;
- EVT.keyModifiers = 0;
- EVT.allowLEDS = true;
-
- /* Set default values for mouse double click and mouse auto events */
- EVT.doubleClick = 440;
- EVT.autoRepeat = 55;
- EVT.autoDelay = 330;
- EVT.autoTicks = 0;
- EVT.doubleClickThresh = 5;
- EVT.firstAuto = true;
- EVT.autoMouse_x = EVT.autoMouse_y = 0;
- memset(&EVT.downMouse,0,sizeof(EVT.downMouse));
-
- /* Setup default pointers for event library */
- EVT.userEventCallback = NULL;
- EVT.codePage = &_CP_US_English;
-
- /* Initialise the joystick module and do basic calibration (which assumes
- * the joystick is centered.
- */
- EVT.joyMask = EVT_joyIsPresent();
-}
-
-#if defined(NEED_SCALE_JOY_AXIS) || !defined(USE_OS_JOYSTICK)
-/****************************************************************************
-REMARKS:
-This function scales a joystick axis value to normalised form.
-****************************************************************************/
-static int scaleJoyAxis(
- int raw,
- int axis)
-{
- int scaled,range;
-
- /* Make sure the joystick is calibrated properly */
- if (EVT.joyCenter[axis] - EVT.joyMin[axis] < 5)
- return raw;
- if (EVT.joyMax[axis] - EVT.joyCenter[axis] < 5)
- return raw;
-
- /* Now scale the coordinates to -128 to 127 */
- raw -= EVT.joyCenter[axis];
- if (raw < 0)
- range = EVT.joyCenter[axis]-EVT.joyMin[axis];
- else
- range = EVT.joyMax[axis]-EVT.joyCenter[axis];
- scaled = (raw * 128) / range;
- if (scaled < -128)
- scaled = -128;
- if (scaled > 127)
- scaled = 127;
- return scaled;
-}
-#endif
-
-#if defined(__SMX32__)
-#include "smx/event.c"
-#elif defined(__RTTARGET__)
-#include "rttarget/event.c"
-#elif defined(__REALDOS__)
-#include "dos/event.c"
-#elif defined(__WINDOWS32__)
-#include "win32/event.c"
-#elif defined(__OS2__)
-#if defined(__OS2_PM__)
-#include "os2pm/event.c"
-#else
-#include "os2/event.c"
-#endif
-#elif defined(__LINUX__)
-#if defined(__USE_X11__)
-#include "x11/event.c"
-#else
-#include "linux/event.c"
-#endif
-#elif defined(__QNX__)
-#if defined(__USE_PHOTON__)
-#include "photon/event.c"
-#elif defined(__USE_X11__)
-#include "x11/event.c"
-#else
-#include "qnx/event.c"
-#endif
-#elif defined(__BEOS__)
-#include "beos/event.c"
-#else
-#error Event library not ported to this platform yet!
-#endif
-
-/*------------------------ Public interface routines ----------------------*/
-
-/* If USE_OS_JOYSTICK is defined, the OS specific libraries will implement
- * the joystick code rather than using the generic OS portable version.
- */
-
-#ifndef USE_OS_JOYSTICK
-/****************************************************************************
-DESCRIPTION:
-Returns the mask indicating what joystick axes are attached.
-
-HEADER:
-event.h
-
-REMARKS:
-This function is used to detect the attached joysticks, and determine
-what axes are present and functioning. This function will re-detect any
-attached joysticks when it is called, so if the user forgot to attach
-the joystick when the application started, you can call this function to
-re-detect any newly attached joysticks.
-
-SEE ALSO:
-EVT_joySetLowerRight, EVT_joySetCenter, EVT_joyIsPresent
-****************************************************************************/
-int EVTAPI EVT_joyIsPresent(void)
-{
- int mask,i;
-
- memset(EVT.joyMin,0,sizeof(EVT.joyMin));
- memset(EVT.joyCenter,0,sizeof(EVT.joyCenter));
- memset(EVT.joyMax,0,sizeof(EVT.joyMax));
- memset(EVT.joyPrev,0,sizeof(EVT.joyPrev));
- EVT.joyButState = 0;
-#ifdef __LINUX__
- PM_init();
-#endif
- mask = _EVT_readJoyAxis(EVT_JOY_AXIS_ALL,EVT.joyCenter);
- if (mask) {
- for (i = 0; i < JOY_NUM_AXES; i++)
- EVT.joyMax[i] = EVT.joyCenter[i]*2;
- }
- return mask;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Polls the joystick for position and button information.
-
-HEADER:
-event.h
-
-REMARKS:
-This routine is used to poll analogue joysticks for button and position
-information. It should be called once for each main loop of the user
-application, just before processing all pending events via EVT_getNext.
-All information polled from the joystick will be posted to the event
-queue for later retrieval.
-
-Note: Most analogue joysticks will provide readings that change even
- though the joystick has not moved. Hence if you call this routine
- you will likely get an EVT_JOYMOVE event every time through your
- event loop.
-
-SEE ALSO:
-EVT_getNext, EVT_peekNext, EVT_joySetUpperLeft, EVT_joySetLowerRight,
-EVT_joySetCenter, EVT_joyIsPresent
-****************************************************************************/
-void EVTAPI EVT_pollJoystick(void)
-{
- event_t evt;
- int i,axis[JOY_NUM_AXES],newButState,mask,moved,ps;
-
- if (EVT.joyMask) {
- /* Read joystick axes and post movement events if they have
- * changed since the last time we polled. Until the events are
- * actually flushed, we keep modifying the same joystick movement
- * event, so you won't get multiple movement event
- */
- mask = _EVT_readJoyAxis(EVT.joyMask,axis);
- newButState = _EVT_readJoyButtons();
- moved = false;
- for (i = 0; i < JOY_NUM_AXES; i++) {
- if (mask & (EVT_JOY_AXIS_X1 << i))
- axis[i] = scaleJoyAxis(axis[i],i);
- else
- axis[i] = EVT.joyPrev[i];
- if (axis[i] != EVT.joyPrev[i])
- moved = true;
- }
- if (moved) {
- memcpy(EVT.joyPrev,axis,sizeof(EVT.joyPrev));
- ps = _EVT_disableInt();
- if (EVT.oldJoyMove != -1) {
- /* Modify the existing joystick movement event */
- EVT.evtq[EVT.oldJoyMove].message = newButState;
- EVT.evtq[EVT.oldJoyMove].where_x = EVT.joyPrev[0];
- EVT.evtq[EVT.oldJoyMove].where_y = EVT.joyPrev[1];
- EVT.evtq[EVT.oldJoyMove].relative_x = EVT.joyPrev[2];
- EVT.evtq[EVT.oldJoyMove].relative_y = EVT.joyPrev[3];
- }
- else if (EVT.count < EVENTQSIZE) {
- /* Add a new joystick movement event */
- EVT.oldJoyMove = EVT.freeHead;
- memset(&evt,0,sizeof(evt));
- evt.what = EVT_JOYMOVE;
- evt.message = EVT.joyButState;
- evt.where_x = EVT.joyPrev[0];
- evt.where_y = EVT.joyPrev[1];
- evt.relative_x = EVT.joyPrev[2];
- evt.relative_y = EVT.joyPrev[3];
- addEvent(&evt);
- }
- _EVT_restoreInt(ps);
- }
-
- /* Read the joystick buttons, and post events to reflect the change
- * in state for the joystick buttons.
- */
- if (newButState != EVT.joyButState) {
- if (EVT.count < EVENTQSIZE) {
- /* Add a new joystick click event */
- ps = _EVT_disableInt();
- memset(&evt,0,sizeof(evt));
- evt.what = EVT_JOYCLICK;
- evt.message = newButState;
- EVT.evtq[EVT.oldJoyMove].where_x = EVT.joyPrev[0];
- EVT.evtq[EVT.oldJoyMove].where_y = EVT.joyPrev[1];
- EVT.evtq[EVT.oldJoyMove].relative_x = EVT.joyPrev[2];
- EVT.evtq[EVT.oldJoyMove].relative_y = EVT.joyPrev[3];
- addEvent(&evt);
- _EVT_restoreInt(ps);
- }
- EVT.joyButState = newButState;
- }
- }
-}
-
-/****************************************************************************
-DESCRIPTION:
-Calibrates the joystick upper left position
-
-HEADER:
-event.h
-
-REMARKS:
-This function can be used to zero in on better joystick calibration factors,
-which may work better than the default simplistic calibration (which assumes
-the joystick is centered when the event library is initialised).
-To use this function, ask the user to hold the stick in the upper left
-position and then have them press a key or button. and then call this
-function. This function will then read the joystick and update the
-calibration factors.
-
-Usually, assuming that the stick was centered when the event library was
-initialized, you really only need to call EVT_joySetLowerRight since the
-upper left position is usually always 0,0 on most joysticks. However, the
-safest procedure is to call all three calibration functions.
-
-SEE ALSO:
-EVT_joySetUpperLeft, EVT_joySetLowerRight, EVT_joyIsPresent
-****************************************************************************/
-void EVTAPI EVT_joySetUpperLeft(void)
-{
- _EVT_readJoyAxis(EVT_JOY_AXIS_ALL,EVT.joyMin);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Calibrates the joystick lower right position
-
-HEADER:
-event.h
-
-REMARKS:
-This function can be used to zero in on better joystick calibration factors,
-which may work better than the default simplistic calibration (which assumes
-the joystick is centered when the event library is initialised).
-To use this function, ask the user to hold the stick in the lower right
-position and then have them press a key or button. and then call this
-function. This function will then read the joystick and update the
-calibration factors.
-
-Usually, assuming that the stick was centered when the event library was
-initialized, you really only need to call EVT_joySetLowerRight since the
-upper left position is usually always 0,0 on most joysticks. However, the
-safest procedure is to call all three calibration functions.
-
-SEE ALSO:
-EVT_joySetUpperLeft, EVT_joySetCenter, EVT_joyIsPresent
-****************************************************************************/
-void EVTAPI EVT_joySetLowerRight(void)
-{
- _EVT_readJoyAxis(EVT_JOY_AXIS_ALL,EVT.joyMax);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Calibrates the joystick center position
-
-HEADER:
-event.h
-
-REMARKS:
-This function can be used to zero in on better joystick calibration factors,
-which may work better than the default simplistic calibration (which assumes
-the joystick is centered when the event library is initialised).
-To use this function, ask the user to hold the stick in the center
-position and then have them press a key or button. and then call this
-function. This function will then read the joystick and update the
-calibration factors.
-
-Usually, assuming that the stick was centered when the event library was
-initialized, you really only need to call EVT_joySetLowerRight since the
-upper left position is usually always 0,0 on most joysticks. However, the
-safest procedure is to call all three calibration functions.
-
-SEE ALSO:
-EVT_joySetUpperLeft, EVT_joySetLowerRight, EVT_joySetCenter
-****************************************************************************/
-void EVTAPI EVT_joySetCenter(void)
-{
- _EVT_readJoyAxis(EVT_JOY_AXIS_ALL,EVT.joyCenter);
-}
-#endif
-
-/****************************************************************************
-DESCRIPTION:
-Posts a user defined event to the event queue
-
-HEADER:
-event.h
-
-RETURNS:
-True if event was posted, false if event queue is full.
-
-PARAMETERS:
-what - Type code for message to post
-message - Event specific message to post
-modifiers - Event specific modifier flags to post
-
-REMARKS:
-This routine is used to post user defined events to the event queue.
-
-SEE ALSO:
-EVT_flush, EVT_getNext, EVT_peekNext, EVT_halt
-****************************************************************************/
-ibool EVTAPI EVT_post(
- ulong which,
- ulong what,
- ulong message,
- ulong modifiers)
-{
- event_t evt;
- uint ps;
-
- if (EVT.count < EVENTQSIZE) {
- /* Save information in event record */
- ps = _EVT_disableInt();
- evt.which = which;
- evt.when = _EVT_getTicks();
- evt.what = what;
- evt.message = message;
- evt.modifiers = modifiers;
- addEvent(&evt); /* Add to EVT.tail of event queue */
- _EVT_restoreInt(ps);
- return true;
- }
- else
- return false;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Flushes all events of a specified type from the event queue.
-
-PARAMETERS:
-mask - Mask specifying the types of events that should be removed
-
-HEADER:
-event.h
-
-REMARKS:
-Flushes (removes) all pending events of the specified type from the event
-queue. You may combine the masks for different event types with a simple
-logical OR.
-
-SEE ALSO:
-EVT_getNext, EVT_halt, EVT_peekNext
-****************************************************************************/
-void EVTAPI EVT_flush(
- ulong mask)
-{
- event_t evt;
-
- do { /* Flush all events */
- EVT_getNext(&evt,mask);
- } while (evt.what != EVT_NULLEVT);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Halts until and event of the specified type is recieved.
-
-HEADER:
-event.h
-
-PARAMETERS:
-evt - Pointer to
-mask - Mask specifying the types of events that should be removed
-
-REMARKS:
-This functions halts exceution until an event of the specified type is
-recieved into the event queue. It does not flush the event queue of events
-before performing the busy loop. However this function does throw away
-any events other than the ones you have requested via the event mask, to
-avoid the event queue filling up with unwanted events (like EVT_KEYUP or
-EVT_MOUSEMOVE events).
-
-SEE ALSO:
-EVT_getNext, EVT_flush, EVT_peekNext
-****************************************************************************/
-void EVTAPI EVT_halt(
- event_t *evt,
- ulong mask)
-{
- do { /* Wait for an event */
- if (mask & (EVT_JOYEVT))
- EVT_pollJoystick();
- EVT_getNext(evt,EVT_EVERYEVT);
- } while (!(evt->what & mask));
-}
-
-/****************************************************************************
-DESCRIPTION:
-Peeks at the next pending event in the event queue.
-
-HEADER:
-event.h
-
-RETURNS:
-True if an event is pending, false if not.
-
-PARAMETERS:
-evt - Pointer to structure to return the event info in
-mask - Mask specifying the types of events that should be removed
-
-REMARKS:
-Peeks at the next pending event of the specified type in the event queue. The
-mask parameter is used to specify the type of events to be peeked at, and
-can be any logical combination of any of the flags defined by the
-EVT_eventType enumeration.
-
-In contrast to EVT_getNext, the event is not removed from the event queue.
-You may combine the masks for different event types with a simple logical OR.
-
-SEE ALSO:
-EVT_flush, EVT_getNext, EVT_halt
-****************************************************************************/
-ibool EVTAPI EVT_peekNext(
- event_t *evt,
- ulong mask)
-{
- int evtID;
- uint ps;
-
- if (EVT.heartBeat)
- EVT.heartBeat(EVT.heartBeatParams);
- _EVT_pumpMessages(); /* Pump all messages into queue */
- EVT.mouseMove(EVT.mx,EVT.my); /* Move the mouse cursor */
- evt->what = EVT_NULLEVT; /* Default to null event */
- if (EVT.count) {
- /* It is possible that an event be posted while we are trying
- * to access the event queue. This would create problems since
- * we may end up with invalid data for our event queue pointers. To
- * alleviate this, all interrupts are suspended while we manipulate
- * our pointers.
- */
- ps = _EVT_disableInt(); /* disable interrupts */
- for (evtID = EVT.head; evtID != -1; evtID = EVT.evtq[evtID].next) {
- if (EVT.evtq[evtID].what & mask)
- break; /* Found an event */
- }
- if (evtID == -1) {
- _EVT_restoreInt(ps);
- return false; /* Event was not found */
- }
- *evt = EVT.evtq[evtID]; /* Return the event */
- _EVT_restoreInt(ps);
- if (evt->what & EVT_KEYEVT)
- _EVT_maskKeyCode(evt);
- }
- return evt->what != EVT_NULLEVT;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Retrieves the next pending event from the event queue.
-
-PARAMETERS:
-evt - Pointer to structure to return the event info in
-mask - Mask specifying the types of events that should be removed
-
-HEADER:
-event.h
-
-RETURNS:
-True if an event was pending, false if not.
-
-REMARKS:
-Retrieves the next pending event from the event queue, and stores it in a
-event_t structure. The mask parameter is used to specify the type of events
-to be removed, and can be any logical combination of any of the flags defined
-by the EVT_eventType enumeration.
-
-The what field of the event contains the event code of the event that was
-extracted. All application specific events should begin with the EVT_USEREVT
-code and build from there. Since the event code is stored in an integer,
-there is a maximum of 32 different event codes that can be distinguished.
-You can store extra information about the event in the message field to
-distinguish between events of the same class (for instance the button used in
-a EVT_MOUSEDOWN event).
-
-If an event of the specified type was not in the event queue, the what field
-of the event will be set to NULLEVT, and the return value will return false.
-
-Note: You should /always/ use the EVT_EVERYEVT mask for extracting events
- from your main event loop handler. Using a mask for only a specific
- type of event for long periods of time will cause the event queue to
- fill up with events of the type you are ignoring, eventually causing
- the application to hang when the event queue becomes full.
-
-SEE ALSO:
-EVT_flush, EVT_halt, EVT_peekNext
-****************************************************************************/
-ibool EVTAPI EVT_getNext(
- event_t *evt,
- ulong mask)
-{
- int evtID,next,prev;
- uint ps;
-
- if (EVT.heartBeat)
- EVT.heartBeat(EVT.heartBeatParams);
- _EVT_pumpMessages(); /* Pump all messages into queue */
- EVT.mouseMove(EVT.mx,EVT.my); /* Move the mouse cursor */
- evt->what = EVT_NULLEVT; /* Default to null event */
- if (EVT.count) {
- /* It is possible that an event be posted while we are trying
- * to access the event queue. This would create problems since
- * we may end up with invalid data for our event queue pointers. To
- * alleviate this, all interrupts are suspended while we manipulate
- * our pointers.
- */
- ps = _EVT_disableInt(); /* disable interrupts */
- for (evtID = EVT.head; evtID != -1; evtID = EVT.evtq[evtID].next) {
- if (EVT.evtq[evtID].what & mask)
- break; /* Found an event */
- }
- if (evtID == -1) {
- _EVT_restoreInt(ps);
- return false; /* Event was not found */
- }
- next = EVT.evtq[evtID].next;
- prev = EVT.evtq[evtID].prev;
- if (prev != -1)
- EVT.evtq[prev].next = next;
- else
- EVT.head = next;
- if (next != -1)
- EVT.evtq[next].prev = prev;
- else
- EVT.tail = prev;
- *evt = EVT.evtq[evtID]; /* Return the event */
- EVT.evtq[evtID].next = EVT.freeHead; /* and return to free list */
- EVT.freeHead = evtID;
- EVT.count--;
- if (evt->what == EVT_MOUSEMOVE)
- EVT.oldMove = -1;
- if (evt->what == EVT_KEYREPEAT)
- EVT.oldKey = -1;
- if (evt->what == EVT_JOYMOVE)
- EVT.oldJoyMove = -1;
- _EVT_restoreInt(ps); /* enable interrupts */
- if (evt->what & EVT_KEYEVT)
- _EVT_maskKeyCode(evt);
- }
-
- /* If there is no event pending, check if we should generate an auto
- * mouse down event if the mouse is still currently down.
- */
- if (evt->what == EVT_NULLEVT && EVT.autoRepeat && (mask & EVT_MOUSEAUTO) && (EVT.downMouse.what & EVT_MOUSEDOWN)) {
- ulong ticks = _EVT_getTicks();
- if ((ticks - EVT.autoTicks) >= (EVT.autoRepeat + (EVT.firstAuto ? EVT.autoDelay : 0))) {
- evt->what = EVT_MOUSEAUTO;
- evt->message = EVT.downMouse.message;
- evt->modifiers = EVT.downMouse.modifiers;
- evt->where_x = EVT.autoMouse_x;
- evt->where_y = EVT.autoMouse_y;
- evt->relative_x = 0;
- evt->relative_y = 0;
- EVT.autoTicks = evt->when = ticks;
- EVT.firstAuto = false;
- }
- }
- return evt->what != EVT_NULLEVT;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Installs a user supplied event filter callback for event handling.
-
-HEADER:
-event.h
-
-PARAMETERS:
-userEventFilter - Address of user supplied event filter callback
-
-REMARKS:
-This function allows the application programmer to install an event filter
-callback for event handling. Once you install your callback, the MGL
-event handling routines will call your callback with a pointer to the
-new event that will be placed into the event queue. Your callback can the
-modify the contents of the event before it is placed into the queue (for
-instance adding custom information or perhaps high precision timing
-information).
-
-If your callback returns FALSE, the event will be ignore and will not be
-posted to the event queue. You should always return true from your event
-callback unless you plan to use the events immediately that they are
-recieved.
-
-Note: Your event callback may be called in response to a hardware
- interrupt and will be executing in the context of the hardware
- interrupt handler under MSDOS (ie: keyboard interrupt or mouse
- interrupt). For this reason the code pages for the callback that
- you register must be locked in memory with the PM_lockCodePages
- function. You must also lock down any data pages that your function
- needs to reference as well.
-
-Note: You can also use this filter callback to process events at the
- time they are activated by the user (ie: when the user hits the
- key or moves the mouse), but make sure your code runs as fast as
- possible as it will be executing inside the context of an interrupt
- handler on some systems.
-
-SEE ALSO:
-EVT_getNext, EVT_peekNext
-****************************************************************************/
-void EVTAPI EVT_setUserEventFilter(
- _EVT_userEventFilter filter)
-{
- EVT.userEventCallback = filter;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Installs a user supplied event heartbeat callback function.
-
-HEADER:
-event.h
-
-PARAMETERS:
-callback - Address of user supplied event heartbeat callback
-params - Parameters to pass to the event heartbeat function
-
-REMARKS:
-This function allows the application programmer to install an event heatbeat
-function that gets called every time that EVT_getNext or EVT_peekNext
-is called. This is primarily useful for simulating text mode cursors inside
-event handling code when running in graphics modes as opposed to hardware
-text modes.
-
-SEE ALSO:
-EVT_getNext, EVT_peekNext, EVT_getHeartBeatCallback
-****************************************************************************/
-void EVTAPI EVT_setHeartBeatCallback(
- _EVT_heartBeatCallback callback,
- void *params)
-{
- EVT.heartBeat = callback;
- EVT.heartBeatParams = params;
-}
-
-
-/****************************************************************************
-DESCRIPTION:
-Returns the current user supplied event heartbeat callback function.
-
-HEADER:
-event.h
-
-PARAMETERS:
-callback - Place to store the address of user supplied event heartbeat callback
-params - Place to store the parameters to pass to the event heartbeat function
-
-REMARKS:
-This function retrieves the current event heatbeat function that gets called
-every time that EVT_getNext or EVT_peekNext is called.
-
-SEE ALSO:
-EVT_getNext, EVT_peekNext, EVT_setHeartBeatCallback
-****************************************************************************/
-void EVTAPI EVT_getHeartBeatCallback(
- _EVT_heartBeatCallback *callback,
- void **params)
-{
- *callback = EVT.heartBeat;
- *params = EVT.heartBeatParams;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Determines if a specified key is currently down.
-
-PARAMETERS:
-scanCode - Scan code to test
-
-RETURNS:
-True of the specified key is currently held down.
-
-HEADER:
-event.h
-
-REMARKS:
-This function determines if a specified key is currently down at the
-time that the call is made. You simply need to pass in the scan code of
-the key that you wish to test, and the MGL will tell you if it is currently
-down or not. The MGL does this by keeping track of the up and down state
-of all the keys.
-****************************************************************************/
-ibool EVTAPI EVT_isKeyDown(
- uchar scanCode)
-{
- return _EVT_isKeyDown(scanCode);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Set the mouse position for the event module
-
-PARAMETERS:
-x - X coordinate to move the mouse cursor position to
-y - Y coordinate to move the mouse cursor position to
-
-HEADER:
-event.h
-
-REMARKS:
-This function moves the mouse cursor position for the event module to the
-specified location.
-
-SEE ALSO:
-EVT_getMousePos
-****************************************************************************/
-void EVTAPI EVT_setMousePos(
- int x,
- int y)
-{
- EVT.mx = x;
- EVT.my = y;
- _EVT_setMousePos(&EVT.mx,&EVT.my);
- EVT.mouseMove(EVT.mx,EVT.my);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns the current mouse cursor location.
-
-HEADER:
-event.h
-
-PARAMETERS:
-x - Place to store value for mouse x coordinate (screen coordinates)
-y - Place to store value for mouse y coordinate (screen coordinates)
-
-REMARKS:
-Obtains the current mouse cursor position in screen coordinates. Normally the
-mouse cursor location is tracked using the mouse movement events that are
-posted to the event queue when the mouse moves, however this routine
-provides an alternative method of polling the mouse cursor location.
-
-SEE ALSO:
-EVT_setMousePos
-****************************************************************************/
-void EVTAPI EVT_getMousePos(
- int *x,
- int *y)
-{
- *x = EVT.mx;
- *y = EVT.my;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns the currently active code page for translation of keyboard characters.
-
-HEADER:
-event.h
-
-RETURNS:
-Pointer to the currently active code page translation table.
-
-REMARKS:
-This function is returns a pointer to the currently active code page
-translation table. See EVT_setCodePage for more information.
-
-SEE ALSO:
-EVT_setCodePage
-****************************************************************************/
-codepage_t * EVTAPI EVT_getCodePage(void)
-{
- return EVT.codePage;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Sets the currently active code page for translation of keyboard characters.
-
-HEADER:
-event.h
-
-PARAMETERS:
-page - New code page to make active
-
-REMARKS:
-This function is used to set a new code page translation table that is used
-to translate virtual scan code values to ASCII characters for different
-keyboard configurations. The default is usually US English, although if
-possible the PM library will auto-detect the correct code page translation
-for the target OS if OS services are available to determine what type of
-keyboard is currently attached.
-
-SEE ALSO:
-EVT_getCodePage
-****************************************************************************/
-void EVTAPI EVT_setCodePage(
- codepage_t *page)
-{
- EVT.codePage = page;
-}
-
-/* The following contains fake C prototypes and documentation for the
- * macro functions in the event.h header file. These exist soley so
- * that DocJet will correctly pull in the documentation for these functions.
- */
-#ifdef INCLUDE_DOC_FUNCTIONS
-
-/****************************************************************************
-DESCRIPTION:
-Macro to extract the ASCII code from a message.
-
-PARAMETERS:
-message - Message to extract ASCII code from
-
-RETURNS:
-ASCII code extracted from the message.
-
-HEADER:
-event.h
-
-REMARKS:
-Macro to extract the ASCII code from the message field of the event_t
-structure. You pass the message field to the macro as the parameter and
-the ASCII code is the result, for example:
-
- event_t EVT.myEvent;
- uchar code;
- code = EVT_asciiCode(EVT.myEvent.message);
-
-SEE ALSO:
-EVT_scanCode, EVT_repeatCount
-****************************************************************************/
-uchar EVT_asciiCode(
- ulong message);
-
-/****************************************************************************
-DESCRIPTION:
-Macro to extract the keyboard scan code from a message.
-
-HEADER:
-event.h
-
-PARAMETERS:
-message - Message to extract scan code from
-
-RETURNS:
-Keyboard scan code extracted from the message.
-
-REMARKS:
-Macro to extract the keyboard scan code from the message field of the event
-structure. You pass the message field to the macro as the parameter and
-the scan code is the result, for example:
-
- event_t EVT.myEvent;
- uchar code;
- code = EVT_scanCode(EVT.myEvent.message);
-
-NOTE: Scan codes in the event library are not really hardware scan codes,
- but rather virtual scan codes as generated by a low level keyboard
- interface driver. All virtual scan code values are defined by the
- EVT_scanCodesType enumeration, and will be identical across all
- supports OS'es and platforms.
-
-SEE ALSO:
-EVT_asciiCode, EVT_repeatCount
-****************************************************************************/
-uchar EVT_scanCode(
- ulong message);
-
-/****************************************************************************
-DESCRIPTION:
-Macro to extract the repeat count from a message.
-
-HEADER:
-event.h
-
-PARAMETERS:
-message - Message to extract repeat count from
-
-RETURNS:
-Repeat count extracted from the message.
-
-REMARKS:
-Macro to extract the repeat count from the message field of the event
-structure. The repeat count is the number of times that the key repeated
-before there was another keyboard event to be place in the queue, and
-allows the event handling code to avoid keyboard buffer overflow
-conditions when a single key is held down by the user. If you are processing
-a key repeat code, you will probably want to check this field to see how
-many key repeats you should process for this message.
-
-SEE ALSO:
-EVT_asciiCode, EVT_repeatCount
-****************************************************************************/
-short EVT_repeatCount(
- ulong message);
-
-#endif /* DOC FUNCTIONS */
-
-#if defined(__REALDOS__) || defined(__SMX32__)
-/* {secret} */
-void EVTAPI _EVT_cCodeEnd(void) {}
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/pm/linux/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/linux/cpuinfo.c
deleted file mode 100644
index e88d210954..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/linux/cpuinfo.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Linux
-*
-* Description: Linux specific code for the CPU detection module.
-*
-****************************************************************************/
-
-#include <ztimer.h>
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-TODO: We should implement this for Linux!
-****************************************************************************/
-#define SetMaxThreadPriority() 0
-
-/****************************************************************************
-REMARKS:
-TODO: We should implement this for Linux!
-****************************************************************************/
-#define RestoreThreadPriority(i)
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
- CPU_largeInteger *freq)
-{
- freq->low = 1000000;
- freq->high = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-****************************************************************************/
-#define GetCounter(t) \
-{ \
- struct timeval tv; \
- gettimeofday(&tv,NULL); \
- (t)->low = tv.tv_sec*1000000 + tv.tv_usec; \
- (t)->high = 0; \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/linux/event.c b/board/MAI/bios_emulator/scitech/src/pm/linux/event.c
deleted file mode 100644
index ce38732097..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/linux/event.c
+++ /dev/null
@@ -1,1360 +0,0 @@
-/****************************************************************************
-*
-* SciTech Multi-platform Graphics Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Linux
-*
-* Description: Linux fullscreen console implementation for the SciTech
-* cross platform event library.
-* Portions ripped straigth from the gpm source code for mouse
-* handling.
-*
-****************************************************************************/
-
-/*---------------------------- Global Variables ---------------------------*/
-
-extern int _PM_console_fd;
-static ushort keyUpMsg[256] = {0};
-static int _EVT_mouse_fd = 0;
-static int range_x, range_y;
-static int opt_baud = 1200, opt_sample = 100;
-#ifdef USE_OS_JOYSTICK
-static short *axis0 = NULL, *axis1 = NULL;
-static uchar *buts0 = NULL, *buts1 = NULL;
-static int joystick0_fd = 0, joystick1_fd = 0;
-static int js_version = 0;
-#endif
-
-/* This defines the supported mouse drivers */
-
-typedef enum {
- EVT_noMouse = -1,
- EVT_microsoft = 0,
- EVT_ps2,
- EVT_mousesystems,
- EVT_gpm,
- EVT_MMseries,
- EVT_logitech,
- EVT_busmouse,
- EVT_mouseman,
- EVT_intellimouse,
- EVT_intellimouse_ps2,
- } mouse_drivers_t;
-
-static mouse_drivers_t mouse_driver = EVT_noMouse;
-static char mouse_dev[20] = "/dev/mouse";
-
-typedef struct {
- char *name;
- int flags;
- void (*init)(void);
- uchar proto[4];
- int packet_len;
- int read;
- } mouse_info;
-
-#define STD_FLG (CREAD | CLOCAL | HUPCL)
-
-static void _EVT_mouse_init(void);
-static void _EVT_logitech_init(void);
-static void _EVT_pnpmouse_init(void);
-
-mouse_info mouse_infos[] = {
- {"Microsoft", CS7 | B1200 | STD_FLG, _EVT_mouse_init, {0x40, 0x40, 0x40, 0x00}, 3, 1},
- {"PS2", STD_FLG, NULL, {0xc0, 0x00, 0x00, 0x00}, 3, 1},
- {"MouseSystems", CS8 | CSTOPB | STD_FLG, _EVT_mouse_init, {0xf8, 0x80, 0x00, 0x00}, 5, 5},
- {"GPM", CS8 | CSTOPB | STD_FLG, NULL, {0xf8, 0x80, 0x00, 0x00}, 5, 5},
- {"MMSeries", CS8 | PARENB | PARODD | STD_FLG, _EVT_mouse_init, {0xe0, 0x80, 0x80, 0x00}, 3, 1},
- {"Logitech", CS8 | CSTOPB | STD_FLG, _EVT_logitech_init, {0xe0, 0x80, 0x80, 0x00}, 3, 3},
- {"BusMouse", STD_FLG, NULL, {0xf8, 0x80, 0x00, 0x00}, 3, 3},
- {"MouseMan", CS7 | STD_FLG, _EVT_mouse_init, {0x40, 0x40, 0x40, 0x00}, 3, 1},
- {"IntelliMouse", CS7 | STD_FLG, _EVT_pnpmouse_init, {0xc0, 0x40, 0xc0, 0x00}, 4, 1},
- {"IMPS2", CS7 | STD_FLG, NULL, {0xc0, 0x40, 0xc0, 0x00}, 4, 1}, /* ? */
- };
-
-#define NB_MICE (sizeof(mouse_infos)/sizeof(mouse_info))
-
-/* The name of the environment variables that are used to change the defaults above */
-
-#define ENV_MOUSEDRV "MGL_MOUSEDRV"
-#define ENV_MOUSEDEV "MGL_MOUSEDEV"
-#define ENV_MOUSESPD "MGL_MOUSESPD"
-#define ENV_JOYDEV0 "MGL_JOYDEV1"
-#define ENV_JOYDEV1 "MGL_JOYDEV2"
-
-/* Scancode mappings on Linux for special keys */
-
-typedef struct {
- int scan;
- int map;
- } keymap;
-
-/* TODO: Fix this and set it up so we can do a binary search! */
-
-keymap keymaps[] = {
- {96, KB_padEnter},
- {74, KB_padMinus},
- {78, KB_padPlus},
- {55, KB_padTimes},
- {98, KB_padDivide},
- {71, KB_padHome},
- {72, KB_padUp},
- {73, KB_padPageUp},
- {75, KB_padLeft},
- {76, KB_padCenter},
- {77, KB_padRight},
- {79, KB_padEnd},
- {80, KB_padDown},
- {81, KB_padPageDown},
- {82, KB_padInsert},
- {83, KB_padDelete},
- {105,KB_left},
- {108,KB_down},
- {106,KB_right},
- {103,KB_up},
- {110,KB_insert},
- {102,KB_home},
- {104,KB_pageUp},
- {111,KB_delete},
- {107,KB_end},
- {109,KB_pageDown},
- {125,KB_leftWindows},
- {126,KB_rightWindows},
- {127,KB_menu},
- {100,KB_rightAlt},
- {97,KB_rightCtrl},
- };
-
-/* And the keypad with num lock turned on (changes the ASCII code only) */
-
-keymap keypad[] = {
- {71, ASCII_7},
- {72, ASCII_8},
- {73, ASCII_9},
- {75, ASCII_4},
- {76, ASCII_5},
- {77, ASCII_6},
- {79, ASCII_1},
- {80, ASCII_2},
- {81, ASCII_3},
- {82, ASCII_0},
- {83, ASCII_period},
- };
-
-#define NB_KEYMAPS (sizeof(keymaps)/sizeof(keymaps[0]))
-#define NB_KEYPAD (sizeof(keypad)/sizeof(keypad[0]))
-
-typedef struct {
- int sample;
- char code[2];
- } sample_rate;
-
-sample_rate sampletab[]={
- { 0,"O"},
- { 15,"J"},
- { 27,"K"},
- { 42,"L"},
- { 60,"R"},
- { 85,"M"},
- {125,"Q"},
- {1E9,"N"},
- };
-
-/* Number of keycodes to read at a time from the console */
-
-#define KBDREADBUFFERSIZE 32
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* These are not used under Linux */
-#define _EVT_disableInt() 1
-#define _EVT_restoreInt(flaps)
-
-/****************************************************************************
-PARAMETERS:
-scanCode - Scan code to test
-
-REMARKS:
-This macro determines if a specified key is currently down at the
-time that the call is made.
-****************************************************************************/
-#define _EVT_isKeyDown(scanCode) (keyUpMsg[scanCode] != 0)
-
-/****************************************************************************
-REMARKS:
-This function is used to return the number of ticks since system
-startup in milliseconds. This should be the same value that is placed into
-the time stamp fields of events, and is used to implement auto mouse down
-events.
-****************************************************************************/
-ulong _EVT_getTicks(void)
-{
- static uint starttime = 0;
- struct timeval t;
-
- gettimeofday(&t, NULL);
- if (starttime == 0)
- starttime = t.tv_sec * 1000 + (t.tv_usec/1000);
- return ((t.tv_sec * 1000 + (t.tv_usec/1000)) - starttime);
-}
-
-/****************************************************************************
-REMARKS:
-Small Unix function that checks for availability on a file using select()
-****************************************************************************/
-static ibool dataReady(
- int fd)
-{
- static struct timeval t = { 0L, 0L };
- fd_set fds;
-
- FD_ZERO(&fds);
- FD_SET(fd, &fds);
- return select(fd+1, &fds, NULL, NULL, &t) > 0;
-}
-
-/****************************************************************************
-REMARKS:
-Reads mouse data according to the selected mouse driver.
-****************************************************************************/
-static ibool readMouseData(
- int *buttons,
- int *dx,
- int *dy)
-{
- static uchar data[32],prev = 0;
- int cnt = 0,ret;
- mouse_info *drv;
-
- /* Read the first byte to check for the protocol */
- drv = &mouse_infos[mouse_driver];
- if (read(_EVT_mouse_fd, data, drv->read) != drv->read) {
- perror("read");
- return false;
- }
- if ((data[0] & drv->proto[0]) != drv->proto[1])
- return false;
-
- /* Load a whole protocol packet */
- cnt += drv->read;
- while (cnt < drv->packet_len) {
- ret = read(_EVT_mouse_fd, data+cnt, drv->read);
- if (ret == drv->read)
- cnt += ret;
- else {
- perror("read");
- return false;
- }
- }
- if ((data[1] & drv->proto[2]) != drv->proto[3])
- return false;
-
- /* Now decode the protocol packet */
- switch (mouse_driver) {
- case EVT_microsoft:
- if (data[0] == 0x40 && !(prev|data[1]|data[2]))
- *buttons = 2; /* Third button on MS compatible mouse */
- else
- *buttons= ((data[0] & 0x20) >> 3) | ((data[0] & 0x10) >> 4);
- prev = *buttons;
- *dx = (char)(((data[0] & 0x03) << 6) | (data[1] & 0x3F));
- *dy = (char)(((data[0] & 0x0C) << 4) | (data[2] & 0x3F));
- break;
- case EVT_ps2:
- *buttons = !!(data[0]&1) * 4 + !!(data[0]&2) * 1 + !!(data[0]&4) * 2;
- if (data[1] != 0)
- *dx = (data[0] & 0x10) ? data[1]-256 : data[1];
- else
- *dx = 0;
- if (data[2] != 0)
- *dy = -((data[0] & 0x20) ? data[2]-256 : data[2]);
- else
- *dy = 0;
- break;
- case EVT_mousesystems: case EVT_gpm:
- *buttons = (~data[0]) & 0x07;
- *dx = (char)(data[1]) + (char)(data[3]);
- *dy = -((char)(data[2]) + (char)(data[4]));
- break;
- case EVT_logitech:
- *buttons= data[0] & 0x07;
- *dx = (data[0] & 0x10) ? data[1] : - data[1];
- *dy = (data[0] & 0x08) ? - data[2] : data[2];
- break;
- case EVT_busmouse:
- *buttons= (~data[0]) & 0x07;
- *dx = (char)data[1];
- *dy = -(char)data[2];
- break;
- case EVT_MMseries:
- *buttons = data[0] & 0x07;
- *dx = (data[0] & 0x10) ? data[1] : - data[1];
- *dy = (data[0] & 0x08) ? - data[2] : data[2];
- break;
- case EVT_intellimouse:
- *buttons = ((data[0] & 0x20) >> 3) /* left */
- | ((data[3] & 0x10) >> 3) /* middle */
- | ((data[0] & 0x10) >> 4); /* right */
- *dx = (char)(((data[0] & 0x03) << 6) | (data[1] & 0x3F));
- *dy = (char)(((data[0] & 0x0C) << 4) | (data[2] & 0x3F));
- break;
- case EVT_intellimouse_ps2:
- *buttons = (data[0] & 0x04) >> 1 /* Middle */
- | (data[0] & 0x02) >> 1 /* Right */
- | (data[0] & 0x01) << 2; /* Left */
- *dx = (data[0] & 0x10) ? data[1]-256 : data[1];
- *dy = (data[0] & 0x20) ? -(data[2]-256) : -data[2];
- break;
- case EVT_mouseman: {
- static int getextra;
- static uchar prev=0;
- uchar b;
-
- /* The damned MouseMan has 3/4 bytes packets. The extra byte
- * is only there if the middle button is active.
- * I get the extra byte as a packet with magic numbers in it.
- * and then switch to 4-byte mode.
- */
- if (data[1] == 0xAA && data[2] == 0x55) {
- /* Got unexpected fourth byte */
- if ((b = (*data>>4)) > 0x3)
- return false; /* just a sanity check */
- *dx = *dy = 0;
- drv->packet_len=4;
- getextra=0;
- }
- else {
- /* Got 3/4, as expected */
- /* Motion is independent of packetlen... */
- *dx = (char)(((data[0] & 0x03) << 6) | (data[1] & 0x3F));
- *dy = (char)(((data[0] & 0x0C) << 4) | (data[2] & 0x3F));
- prev = ((data[0] & 0x20) >> 3) | ((data[0] & 0x10) >> 4);
- if (drv->packet_len==4)
- b = data[3]>>4;
- }
- if (drv->packet_len == 4) {
- if (b == 0) {
- drv->packet_len = 3;
- getextra = 1;
- }
- else {
- if (b & 0x2)
- prev |= 2;
- }
- }
- *buttons = prev;
-
- /* This "chord-middle" behaviour was reported by David A. van Leeuwen */
- if (((prev ^ *buttons) & 5) == 5)
- *buttons = *buttons ? 2 : 0;
- prev = *buttons;
- break;
- }
- case EVT_noMouse:
- return false;
- break;
- }
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-Map a keypress via the key mapping table
-****************************************************************************/
-static int getKeyMapping(
- keymap *tab,
- int nb,
- int key)
-{
- int i;
-
- for(i = 0; i < nb; i++) {
- if (tab[i].scan == key)
- return tab[i].map;
- }
- return key;
-}
-
-#ifdef USE_OS_JOYSTICK
-
-static char js0_axes = 0, js0_buttons = 0;
-static char js1_axes = 0, js1_buttons = 0;
-static char joystick0_dev[20] = "/dev/js0";
-static char joystick1_dev[20] = "/dev/js1";
-
-/****************************************************************************
-REMARKS:
-Create a joystick event from the joystick data
-****************************************************************************/
-static void makeJoyEvent(
- event_t *evt)
-{
- evt->message = 0;
- if (buts0 && axis0) {
- if (buts0[0]) evt->message |= EVT_JOY1_BUTTONA;
- if (buts0[1]) evt->message |= EVT_JOY1_BUTTONB;
- evt->where_x = axis0[0];
- evt->where_y = axis0[1];
- }
- else
- evt->where_x = evt->where_y = 0;
- if (buts1 && axis1) {
- if (buts1[0]) evt->message |= EVT_JOY2_BUTTONA;
- if (buts1[1]) evt->message |= EVT_JOY2_BUTTONB;
- evt->where_x = axis1[0];
- evt->where_y = axis1[1];
- }
- else
- evt->where_x = evt->where_y = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Read the joystick axis data
-****************************************************************************/
-int EVTAPI _EVT_readJoyAxis(
- int jmask,
- int *axis)
-{
- int mask = 0;
-
- if ((js_version & ~0xffff) == 0) {
- /* Old 0.x driver */
- struct JS_DATA_TYPE js;
- if (joystick0_fd && read(joystick0_fd, &js, JS_RETURN) == JS_RETURN) {
- if (jmask & EVT_JOY_AXIS_X1)
- axis[0] = js.x;
- if (jmask & EVT_JOY_AXIS_Y1)
- axis[1] = js.y;
- mask |= EVT_JOY_AXIS_X1|EVT_JOY_AXIS_Y1;
- }
- if (joystick1_fd && read(joystick1_fd, &js, JS_RETURN) == JS_RETURN) {
- if (jmask & EVT_JOY_AXIS_X2)
- axis[2] = js.x;
- if (jmask & EVT_JOY_AXIS_Y2)
- axis[3] = js.y;
- mask |= EVT_JOY_AXIS_X2|EVT_JOY_AXIS_Y2;
- }
- }
- else {
- if (axis0) {
- if (jmask & EVT_JOY_AXIS_X1)
- axis[0] = axis0[0];
- if (jmask & EVT_JOY_AXIS_Y1)
- axis[1] = axis0[1];
- mask |= EVT_JOY_AXIS_X1 | EVT_JOY_AXIS_Y1;
- }
- if (axis1) {
- if (jmask & EVT_JOY_AXIS_X2)
- axis[2] = axis1[0];
- if (jmask & EVT_JOY_AXIS_Y2)
- axis[3] = axis1[1];
- mask |= EVT_JOY_AXIS_X2 | EVT_JOY_AXIS_Y2;
- }
- }
- return mask;
-}
-
-/****************************************************************************
-REMARKS:
-Read the joystick button data
-****************************************************************************/
-int EVTAPI _EVT_readJoyButtons(void)
-{
- int buts = 0;
-
- if ((js_version & ~0xffff) == 0) {
- /* Old 0.x driver */
- struct JS_DATA_TYPE js;
- if (joystick0_fd && read(joystick0_fd, &js, JS_RETURN) == JS_RETURN)
- buts = js.buttons;
- if (joystick1_fd && read(joystick1_fd, &js, JS_RETURN) == JS_RETURN)
- buts |= js.buttons << 2;
- }
- else {
- if (buts0)
- buts |= EVT_JOY1_BUTTONA*buts0[0] + EVT_JOY1_BUTTONB*buts0[1];
- if (buts1)
- buts |= EVT_JOY2_BUTTONA*buts1[0] + EVT_JOY2_BUTTONB*buts1[1];
- }
- return buts;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns the mask indicating what joystick axes are attached.
-
-HEADER:
-event.h
-
-REMARKS:
-This function is used to detect the attached joysticks, and determine
-what axes are present and functioning. This function will re-detect any
-attached joysticks when it is called, so if the user forgot to attach
-the joystick when the application started, you can call this function to
-re-detect any newly attached joysticks.
-
-SEE ALSO:
-EVT_joySetLowerRight, EVT_joySetCenter, EVT_joyIsPresent
-****************************************************************************/
-int EVTAPI EVT_joyIsPresent(void)
-{
- static int mask = 0;
- int i;
- char *tmp, name0[128], name1[128];
- static ibool inited = false;
-
- if (inited)
- return mask;
- memset(EVT.joyMin,0,sizeof(EVT.joyMin));
- memset(EVT.joyCenter,0,sizeof(EVT.joyCenter));
- memset(EVT.joyMax,0,sizeof(EVT.joyMax));
- memset(EVT.joyPrev,0,sizeof(EVT.joyPrev));
- EVT.joyButState = 0;
- if ((tmp = getenv(ENV_JOYDEV0)) != NULL)
- strcpy(joystick0_dev,tmp);
- if ((tmp = getenv(ENV_JOYDEV1)) != NULL)
- strcpy(joystick1_dev,tmp);
- if ((joystick0_fd = open(joystick0_dev, O_RDONLY)) < 0)
- joystick0_fd = 0;
- if ((joystick1_fd = open(joystick1_dev, O_RDONLY)) < 0)
- joystick1_fd = 0;
- if (!joystick0_fd && !joystick1_fd) /* No joysticks detected */
- return 0;
- inited = true;
- if (ioctl(joystick0_fd ? joystick0_fd : joystick1_fd, JSIOCGVERSION, &js_version) < 0)
- return 0;
-
- /* Initialise joystick 0 */
- if (joystick0_fd) {
- ioctl(joystick0_fd, JSIOCGNAME(sizeof(name0)), name0);
- if (js_version & ~0xffff) {
- struct js_event js;
-
- ioctl(joystick0_fd, JSIOCGAXES, &js0_axes);
- ioctl(joystick0_fd, JSIOCGBUTTONS, &js0_buttons);
- axis0 = PM_calloc((int)js0_axes, sizeof(short));
- buts0 = PM_malloc((int)js0_buttons);
- /* Read the initial events */
- while(dataReady(joystick0_fd)
- && read(joystick0_fd, &js, sizeof(struct js_event)) == sizeof(struct js_event)
- && (js.type & JS_EVENT_INIT)
- ) {
- if (js.type & JS_EVENT_BUTTON)
- buts0[js.number] = js.value;
- else if (js.type & JS_EVENT_AXIS)
- axis0[js.number] = scaleJoyAxis(js.value,js.number);
- }
- }
- else {
- js0_axes = 2;
- js0_buttons = 2;
- axis0 = PM_calloc((int)js0_axes, sizeof(short));
- buts0 = PM_malloc((int)js0_buttons);
- }
- }
-
- /* Initialise joystick 1 */
- if (joystick1_fd) {
- ioctl(joystick1_fd, JSIOCGNAME(sizeof(name1)), name1);
- if (js_version & ~0xffff) {
- struct js_event js;
-
- ioctl(joystick1_fd, JSIOCGAXES, &js1_axes);
- ioctl(joystick1_fd, JSIOCGBUTTONS, &js1_buttons);
- axis1 = PM_calloc((int)js1_axes, sizeof(short));
- buts1 = PM_malloc((int)js1_buttons);
- /* Read the initial events */
- while(dataReady(joystick1_fd)
- && read(joystick1_fd, &js, sizeof(struct js_event))==sizeof(struct js_event)
- && (js.type & JS_EVENT_INIT)
- ) {
- if (js.type & JS_EVENT_BUTTON)
- buts1[js.number] = js.value;
- else if (js.type & JS_EVENT_AXIS)
- axis1[js.number] = scaleJoyAxis(js.value,js.number<<2);
- }
- }
- else {
- js1_axes = 2;
- js1_buttons = 2;
- axis1 = PM_calloc((int)js1_axes, sizeof(short));
- buts1 = PM_malloc((int)js1_buttons);
- }
- }
-
-#ifdef CHECKED
- fprintf(stderr,"Using joystick driver version %d.%d.%d\n",
- js_version >> 16, (js_version >> 8) & 0xff, js_version & 0xff);
- if (joystick0_fd)
- fprintf(stderr,"Joystick 1 (%s): %s\n", joystick0_dev, name0);
- if (joystick1_fd)
- fprintf(stderr,"Joystick 2 (%s): %s\n", joystick1_dev, name1);
-#endif
- mask = _EVT_readJoyAxis(EVT_JOY_AXIS_ALL,EVT.joyCenter);
- if (mask) {
- for (i = 0; i < JOY_NUM_AXES; i++)
- EVT.joyMax[i] = EVT.joyCenter[i]*2;
- }
- return mask;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Polls the joystick for position and button information.
-
-HEADER:
-event.h
-
-REMARKS:
-This routine is used to poll analogue joysticks for button and position
-information. It should be called once for each main loop of the user
-application, just before processing all pending events via EVT_getNext.
-All information polled from the joystick will be posted to the event
-queue for later retrieval.
-
-Note: Most analogue joysticks will provide readings that change even
- though the joystick has not moved. Hence if you call this routine
- you will likely get an EVT_JOYMOVE event every time through your
- event loop.
-
-SEE ALSO:
-EVT_getNext, EVT_peekNext, EVT_joySetUpperLeft, EVT_joySetLowerRight,
-EVT_joySetCenter, EVT_joyIsPresent
-****************************************************************************/
-void EVTAPI EVT_pollJoystick(void)
-{
- event_t evt;
- int i,axis[JOY_NUM_AXES],newButState,mask,moved,ps;
-
- if ((js_version & ~0xFFFF) == 0 && EVT.joyMask) {
- /* Read joystick axes and post movement events if they have
- * changed since the last time we polled. Until the events are
- * actually flushed, we keep modifying the same joystick movement
- * event, so you won't get multiple movement event
- */
- mask = _EVT_readJoyAxis(EVT.joyMask,axis);
- newButState = _EVT_readJoyButtons();
- moved = false;
- for (i = 0; i < JOY_NUM_AXES; i++) {
- if (mask & (EVT_JOY_AXIS_X1 << i))
- axis[i] = scaleJoyAxis(axis[i],i);
- else
- axis[i] = EVT.joyPrev[i];
- if (axis[i] != EVT.joyPrev[i])
- moved = true;
- }
- if (moved) {
- memcpy(EVT.joyPrev,axis,sizeof(EVT.joyPrev));
- ps = _EVT_disableInt();
- if (EVT.oldJoyMove != -1) {
- /* Modify the existing joystick movement event */
- EVT.evtq[EVT.oldJoyMove].message = newButState;
- EVT.evtq[EVT.oldJoyMove].where_x = EVT.joyPrev[0];
- EVT.evtq[EVT.oldJoyMove].where_y = EVT.joyPrev[1];
- EVT.evtq[EVT.oldJoyMove].relative_x = EVT.joyPrev[2];
- EVT.evtq[EVT.oldJoyMove].relative_y = EVT.joyPrev[3];
- }
- else if (EVT.count < EVENTQSIZE) {
- /* Add a new joystick movement event */
- EVT.oldJoyMove = EVT.freeHead;
- memset(&evt,0,sizeof(evt));
- evt.what = EVT_JOYMOVE;
- evt.message = EVT.joyButState;
- evt.where_x = EVT.joyPrev[0];
- evt.where_y = EVT.joyPrev[1];
- evt.relative_x = EVT.joyPrev[2];
- evt.relative_y = EVT.joyPrev[3];
- addEvent(&evt);
- }
- _EVT_restoreInt(ps);
- }
-
- /* Read the joystick buttons, and post events to reflect the change
- * in state for the joystick buttons.
- */
- if (newButState != EVT.joyButState) {
- if (EVT.count < EVENTQSIZE) {
- /* Add a new joystick movement event */
- ps = _EVT_disableInt();
- memset(&evt,0,sizeof(evt));
- evt.what = EVT_JOYCLICK;
- evt.message = newButState;
- EVT.evtq[EVT.oldJoyMove].where_x = EVT.joyPrev[0];
- EVT.evtq[EVT.oldJoyMove].where_y = EVT.joyPrev[1];
- EVT.evtq[EVT.oldJoyMove].relative_x = EVT.joyPrev[2];
- EVT.evtq[EVT.oldJoyMove].relative_y = EVT.joyPrev[3];
- addEvent(&evt);
- _EVT_restoreInt(ps);
- }
- EVT.joyButState = newButState;
- }
- }
-}
-
-/****************************************************************************
-DESCRIPTION:
-Calibrates the joystick upper left position
-
-HEADER:
-event.h
-
-REMARKS:
-This function can be used to zero in on better joystick calibration factors,
-which may work better than the default simplistic calibration (which assumes
-the joystick is centered when the event library is initialised).
-To use this function, ask the user to hold the stick in the upper left
-position and then have them press a key or button. and then call this
-function. This function will then read the joystick and update the
-calibration factors.
-
-Usually, assuming that the stick was centered when the event library was
-initialized, you really only need to call EVT_joySetLowerRight since the
-upper left position is usually always 0,0 on most joysticks. However, the
-safest procedure is to call all three calibration functions.
-
-SEE ALSO:
-EVT_joySetUpperLeft, EVT_joySetLowerRight, EVT_joyIsPresent
-****************************************************************************/
-void EVTAPI EVT_joySetUpperLeft(void)
-{
- _EVT_readJoyAxis(EVT_JOY_AXIS_ALL,EVT.joyMin);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Calibrates the joystick lower right position
-
-HEADER:
-event.h
-
-REMARKS:
-This function can be used to zero in on better joystick calibration factors,
-which may work better than the default simplistic calibration (which assumes
-the joystick is centered when the event library is initialised).
-To use this function, ask the user to hold the stick in the lower right
-position and then have them press a key or button. and then call this
-function. This function will then read the joystick and update the
-calibration factors.
-
-Usually, assuming that the stick was centered when the event library was
-initialized, you really only need to call EVT_joySetLowerRight since the
-upper left position is usually always 0,0 on most joysticks. However, the
-safest procedure is to call all three calibration functions.
-
-SEE ALSO:
-EVT_joySetUpperLeft, EVT_joySetCenter, EVT_joyIsPresent
-****************************************************************************/
-void EVTAPI EVT_joySetLowerRight(void)
-{
- _EVT_readJoyAxis(EVT_JOY_AXIS_ALL,EVT.joyMax);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Calibrates the joystick center position
-
-HEADER:
-event.h
-
-REMARKS:
-This function can be used to zero in on better joystick calibration factors,
-which may work better than the default simplistic calibration (which assumes
-the joystick is centered when the event library is initialised).
-To use this function, ask the user to hold the stick in the center
-position and then have them press a key or button. and then call this
-function. This function will then read the joystick and update the
-calibration factors.
-
-Usually, assuming that the stick was centered when the event library was
-initialized, you really only need to call EVT_joySetLowerRight since the
-upper left position is usually always 0,0 on most joysticks. However, the
-safest procedure is to call all three calibration functions.
-
-SEE ALSO:
-EVT_joySetUpperLeft, EVT_joySetLowerRight, EVT_joySetCenter
-****************************************************************************/
-void EVTAPI EVT_joySetCenter(void)
-{
- _EVT_readJoyAxis(EVT_JOY_AXIS_ALL,EVT.joyCenter);
-}
-#endif
-
-/****************************************************************************
-REMARKS:
-Pumps all messages in the message queue from Linux into our event queue.
-****************************************************************************/
-static void _EVT_pumpMessages(void)
-{
- event_t evt;
- int i,numkeys, c;
- ibool release;
- static struct kbentry ke;
- static char buf[KBDREADBUFFERSIZE];
- static ushort repeatKey[128] = {0};
-
- /* Poll keyboard events */
- while (dataReady(_PM_console_fd) && (numkeys = read(_PM_console_fd, buf, KBDREADBUFFERSIZE)) > 0) {
- for (i = 0; i < numkeys; i++) {
- c = buf[i];
- release = c & 0x80;
- c &= 0x7F;
-
- /* TODO: This is wrong! We need this to be the time stamp at */
- /* ** interrupt ** time!! One solution would be to */
- /* put the keyboard and mouse polling loops into */
- /* a separate thread that can block on I/O to the */
- /* necessay file descriptor. */
- evt.when = _EVT_getTicks();
-
- if (release) {
- /* Key released */
- evt.what = EVT_KEYUP;
- switch (c) {
- case KB_leftShift:
- _PM_modifiers &= ~EVT_LEFTSHIFT;
- break;
- case KB_rightShift:
- _PM_modifiers &= ~EVT_RIGHTSHIFT;
- break;
- case 29:
- _PM_modifiers &= ~(EVT_LEFTCTRL|EVT_CTRLSTATE);
- break;
- case 97: /* Control */
- _PM_modifiers &= ~EVT_CTRLSTATE;
- break;
- case 56:
- _PM_modifiers &= ~(EVT_LEFTALT|EVT_ALTSTATE);
- break;
- case 100:
- _PM_modifiers &= ~EVT_ALTSTATE;
- break;
- default:
- }
- evt.modifiers = _PM_modifiers;
- evt.message = keyUpMsg[c];
- if (EVT.count < EVENTQSIZE)
- addEvent(&evt);
- keyUpMsg[c] = 0;
- repeatKey[c] = 0;
- }
- else {
- /* Key pressed */
- evt.what = EVT_KEYDOWN;
- switch (c) {
- case KB_leftShift:
- _PM_modifiers |= EVT_LEFTSHIFT;
- break;
- case KB_rightShift:
- _PM_modifiers |= EVT_RIGHTSHIFT;
- break;
- case 29:
- _PM_modifiers |= EVT_LEFTCTRL|EVT_CTRLSTATE;
- break;
- case 97: /* Control */
- _PM_modifiers |= EVT_CTRLSTATE;
- break;
- case 56:
- _PM_modifiers |= EVT_LEFTALT|EVT_ALTSTATE;
- break;
- case 100:
- _PM_modifiers |= EVT_ALTSTATE;
- break;
- case KB_capsLock: /* Caps Lock */
- _PM_leds ^= LED_CAP;
- ioctl(_PM_console_fd, KDSETLED, _PM_leds);
- break;
- case KB_numLock: /* Num Lock */
- _PM_leds ^= LED_NUM;
- ioctl(_PM_console_fd, KDSETLED, _PM_leds);
- break;
- case KB_scrollLock: /* Scroll Lock */
- _PM_leds ^= LED_SCR;
- ioctl(_PM_console_fd, KDSETLED, _PM_leds);
- break;
- default:
- }
- evt.modifiers = _PM_modifiers;
- if (keyUpMsg[c]) {
- evt.what = EVT_KEYREPEAT;
- evt.message = keyUpMsg[c] | (repeatKey[c]++ << 16);
- }
- else {
- int asc;
-
- evt.message = getKeyMapping(keymaps, NB_KEYMAPS, c) << 8;
- ke.kb_index = c;
- ke.kb_table = 0;
- if ((_PM_modifiers & EVT_SHIFTKEY) || (_PM_leds & LED_CAP))
- ke.kb_table |= K_SHIFTTAB;
- if (_PM_modifiers & (EVT_LEFTALT | EVT_ALTSTATE))
- ke.kb_table |= K_ALTTAB;
- if (ioctl(_PM_console_fd, KDGKBENT, (unsigned long)&ke)<0)
- perror("ioctl(KDGKBENT)");
- if ((_PM_leds & LED_NUM) && (getKeyMapping(keypad, NB_KEYPAD, c)!=c)) {
- asc = getKeyMapping(keypad, NB_KEYPAD, c);
- }
- else {
- switch (c) {
- case 14:
- asc = ASCII_backspace;
- break;
- case 15:
- asc = ASCII_tab;
- break;
- case 28:
- case 96:
- asc = ASCII_enter;
- break;
- case 1:
- asc = ASCII_esc;
- default:
- asc = ke.kb_value & 0xFF;
- if (asc < 0x1B)
- asc = 0;
- break;
- }
- }
- if ((_PM_modifiers & (EVT_CTRLSTATE|EVT_LEFTCTRL)) && isalpha(asc))
- evt.message |= toupper(asc) - 'A' + 1;
- else
- evt.message |= asc;
- keyUpMsg[c] = evt.message;
- repeatKey[c]++;
- }
- if (EVT.count < EVENTQSIZE)
- addEvent(&evt);
- }
- }
- }
-
- /* Poll mouse events */
- if (_EVT_mouse_fd) {
- int dx, dy, buts;
- static int oldbuts;
-
- while (dataReady(_EVT_mouse_fd)) {
- if (readMouseData(&buts, &dx, &dy)) {
- EVT.mx += dx;
- EVT.my += dy;
- if (EVT.mx < 0) EVT.mx = 0;
- if (EVT.my < 0) EVT.my = 0;
- if (EVT.mx > range_x) EVT.mx = range_x;
- if (EVT.my > range_y) EVT.my = range_y;
- evt.where_x = EVT.mx;
- evt.where_y = EVT.my;
- evt.relative_x = dx;
- evt.relative_y = dy;
-
- /* TODO: This is wrong! We need this to be the time stamp at */
- /* ** interrupt ** time!! One solution would be to */
- /* put the keyboard and mouse polling loops into */
- /* a separate thread that can block on I/O to the */
- /* necessay file descriptor. */
- evt.when = _EVT_getTicks();
- evt.modifiers = _PM_modifiers;
- if (buts & 4)
- evt.modifiers |= EVT_LEFTBUT;
- if (buts & 1)
- evt.modifiers |= EVT_RIGHTBUT;
- if (buts & 2)
- evt.modifiers |= EVT_MIDDLEBUT;
-
- /* Left click events */
- if ((buts&4) != (oldbuts&4)) {
- if (buts&4)
- evt.what = EVT_MOUSEDOWN;
- else
- evt.what = EVT_MOUSEUP;
- evt.message = EVT_LEFTBMASK;
- EVT.oldMove = -1;
- if (EVT.count < EVENTQSIZE)
- addEvent(&evt);
- }
-
- /* Right click events */
- if ((buts&1) != (oldbuts&1)) {
- if (buts&1)
- evt.what = EVT_MOUSEDOWN;
- else
- evt.what = EVT_MOUSEUP;
- evt.message = EVT_RIGHTBMASK;
- EVT.oldMove = -1;
- if (EVT.count < EVENTQSIZE)
- addEvent(&evt);
- }
-
- /* Middle click events */
- if ((buts&2) != (oldbuts&2)) {
- if (buts&2)
- evt.what = EVT_MOUSEDOWN;
- else
- evt.what = EVT_MOUSEUP;
- evt.message = EVT_MIDDLEBMASK;
- EVT.oldMove = -1;
- if (EVT.count < EVENTQSIZE)
- addEvent(&evt);
- }
-
- /* Mouse movement event */
- if (dx || dy) {
- evt.what = EVT_MOUSEMOVE;
- evt.message = 0;
- if (EVT.oldMove != -1) {
- /* Modify existing movement event */
- EVT.evtq[EVT.oldMove].where_x = evt.where_x;
- EVT.evtq[EVT.oldMove].where_y = evt.where_y;
- }
- else {
- /* Save id of this movement event */
- EVT.oldMove = EVT.freeHead;
- if (EVT.count < EVENTQSIZE)
- addEvent(&evt);
- }
- }
- oldbuts = buts;
- }
- }
- }
-
-#ifdef USE_OS_JOYSTICK
- /* Poll joystick events using the 1.x joystick driver API in the 2.2 kernels */
- if (js_version & ~0xffff) {
- static struct js_event js;
-
- /* Read joystick axis 0 */
- evt.when = 0;
- evt.modifiers = _PM_modifiers;
- if (joystick0_fd && dataReady(joystick0_fd) &&
- read(joystick0_fd, &js, sizeof(js)) == sizeof(js)) {
- if (js.type & JS_EVENT_BUTTON) {
- if (js.number < 2) { /* Only 2 buttons for now :( */
- buts0[js.number] = js.value;
- evt.what = EVT_JOYCLICK;
- makeJoyEvent(&evt);
- if (EVT.count < EVENTQSIZE)
- addEvent(&evt);
- }
- }
- else if (js.type & JS_EVENT_AXIS) {
- axis0[js.number] = scaleJoyAxis(js.value,js.number);
- evt.what = EVT_JOYMOVE;
- if (EVT.oldJoyMove != -1) {
- makeJoyEvent(&EVT.evtq[EVT.oldJoyMove]);
- }
- else if (EVT.count < EVENTQSIZE) {
- EVT.oldJoyMove = EVT.freeHead;
- makeJoyEvent(&evt);
- addEvent(&evt);
- }
- }
- }
-
- /* Read joystick axis 1 */
- if (joystick1_fd && dataReady(joystick1_fd) &&
- read(joystick1_fd, &js, sizeof(js))==sizeof(js)) {
- if (js.type & JS_EVENT_BUTTON) {
- if (js.number < 2) { /* Only 2 buttons for now :( */
- buts1[js.number] = js.value;
- evt.what = EVT_JOYCLICK;
- makeJoyEvent(&evt);
- if (EVT.count < EVENTQSIZE)
- addEvent(&evt);
- }
- }
- else if (js.type & JS_EVENT_AXIS) {
- axis1[js.number] = scaleJoyAxis(js.value,js.number<<2);
- evt.what = EVT_JOYMOVE;
- if (EVT.oldJoyMove != -1) {
- makeJoyEvent(&EVT.evtq[EVT.oldJoyMove]);
- }
- else if (EVT.count < EVENTQSIZE) {
- EVT.oldJoyMove = EVT.freeHead;
- makeJoyEvent(&evt);
- addEvent(&evt);
- }
- }
- }
- }
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift _PM_modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-****************************************************************************/
-#define _EVT_maskKeyCode(evt)
-
-/****************************************************************************
-REMARKS:
-Set the speed of the serial port
-****************************************************************************/
-static int setspeed(
- int fd,
- int old,
- int new,
- unsigned short flags)
-{
- struct termios tty;
- char *c;
-
- tcgetattr(fd, &tty);
- tty.c_iflag = IGNBRK | IGNPAR;
- tty.c_oflag = 0;
- tty.c_lflag = 0;
- tty.c_line = 0;
- tty.c_cc[VTIME] = 0;
- tty.c_cc[VMIN] = 1;
- switch (old) {
- case 9600: tty.c_cflag = flags | B9600; break;
- case 4800: tty.c_cflag = flags | B4800; break;
- case 2400: tty.c_cflag = flags | B2400; break;
- case 1200:
- default: tty.c_cflag = flags | B1200; break;
- }
- tcsetattr(fd, TCSAFLUSH, &tty);
- switch (new) {
- case 9600: c = "*q"; tty.c_cflag = flags | B9600; break;
- case 4800: c = "*p"; tty.c_cflag = flags | B4800; break;
- case 2400: c = "*o"; tty.c_cflag = flags | B2400; break;
- case 1200:
- default: c = "*n"; tty.c_cflag = flags | B1200; break;
- }
- write(fd, c, 2);
- usleep(100000);
- tcsetattr(fd, TCSAFLUSH, &tty);
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Generic mouse driver init code
-****************************************************************************/
-static void _EVT_mouse_init(void)
-{
- int i;
-
- /* Change from any available speed to the chosen one */
- for (i = 9600; i >= 1200; i /= 2)
- setspeed(_EVT_mouse_fd, i, opt_baud, mouse_infos[mouse_driver].flags);
-}
-
-/****************************************************************************
-REMARKS:
-Logitech mouse driver init code
-****************************************************************************/
-static void _EVT_logitech_init(void)
-{
- int i;
- struct stat buf;
- int busmouse;
-
- /* is this a serial- or a bus- mouse? */
- if (fstat(_EVT_mouse_fd,&buf) == -1)
- perror("fstat");
- i = MAJOR(buf.st_rdev);
- if (stat("/dev/ttyS0",&buf) == -1)
- perror("stat");
- busmouse=(i != MAJOR(buf.st_rdev));
-
- /* Fix the howmany field, so that serial mice have 1, while busmice have 3 */
- mouse_infos[mouse_driver].read = busmouse ? 3 : 1;
-
- /* Change from any available speed to the chosen one */
- for (i = 9600; i >= 1200; i /= 2)
- setspeed(_EVT_mouse_fd, i, opt_baud, mouse_infos[mouse_driver].flags);
-
- /* This stuff is peculiar of logitech mice, also for the serial ones */
- write(_EVT_mouse_fd, "S", 1);
- setspeed(_EVT_mouse_fd, opt_baud, opt_baud,CS8 |PARENB |PARODD |CREAD |CLOCAL |HUPCL);
-
- /* Configure the sample rate */
- for (i = 0; opt_sample <= sampletab[i].sample; i++)
- ;
- write(_EVT_mouse_fd,sampletab[i].code,1);
-}
-
-/****************************************************************************
-REMARKS:
-Microsoft Intellimouse init code
-****************************************************************************/
-static void _EVT_pnpmouse_init(void)
-{
- struct termios tty;
-
- tcgetattr(_EVT_mouse_fd, &tty);
- tty.c_iflag = IGNBRK | IGNPAR;
- tty.c_oflag = 0;
- tty.c_lflag = 0;
- tty.c_line = 0;
- tty.c_cc[VTIME] = 0;
- tty.c_cc[VMIN] = 1;
- tty.c_cflag = mouse_infos[mouse_driver].flags | B1200;
- tcsetattr(_EVT_mouse_fd, TCSAFLUSH, &tty); /* set parameters */
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
- _EVT_mouseMoveHandler mouseMove)
-{
- int i;
- char *tmp;
-
- /* Initialise the event queue */
- EVT.mouseMove = mouseMove;
- initEventQueue();
- for (i = 0; i < 256; i++)
- keyUpMsg[i] = 0;
-
- /* Keyboard initialization */
- if (_PM_console_fd == -1)
- PM_fatalError("You must first call PM_openConsole to use the EVT functions!");
- _PM_keyboard_rawmode();
- fcntl(_PM_console_fd,F_SETFL,fcntl(_PM_console_fd,F_GETFL) | O_NONBLOCK);
-
- /* Mouse initialization */
- if ((tmp = getenv(ENV_MOUSEDRV)) != NULL) {
- for (i = 0; i < NB_MICE; i++) {
- if (!strcasecmp(tmp, mouse_infos[i].name)) {
- mouse_driver = i;
- break;
- }
- }
- if (i == NB_MICE) {
- fprintf(stderr,"Unknown mouse driver: %s\n", tmp);
- mouse_driver = EVT_noMouse;
- _EVT_mouse_fd = 0;
- }
- }
- if (mouse_driver != EVT_noMouse) {
- if (mouse_driver == EVT_gpm)
- strcpy(mouse_dev,"/dev/gpmdata");
- if ((tmp = getenv(ENV_MOUSEDEV)) != NULL)
- strcpy(mouse_dev,tmp);
-#ifdef CHECKED
- fprintf(stderr,"Using the %s MGL mouse driver on %s.\n", mouse_infos[mouse_driver].name, mouse_dev);
-#endif
- if ((_EVT_mouse_fd = open(mouse_dev, O_RDWR)) < 0) {
- perror("open");
- fprintf(stderr, "Unable to open mouse device %s, dropping mouse support.\n", mouse_dev);
- sleep(1);
- mouse_driver = EVT_noMouse;
- _EVT_mouse_fd = 0;
- }
- else {
- char c;
-
- /* Init and flush the mouse pending input queue */
- if (mouse_infos[mouse_driver].init)
- mouse_infos[mouse_driver].init();
- while(dataReady(_EVT_mouse_fd) && read(_EVT_mouse_fd, &c, 1) == 1)
- ;
- }
- }
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
- int xRes,
- int yRes)
-{
- range_x = xRes;
- range_y = yRes;
-}
-
-/****************************************************************************
-REMARKS
-Modifes the mouse coordinates as necessary if scaling to OS coordinates,
-and sets the OS mouse cursor position.
-****************************************************************************/
-#define _EVT_setMousePos(x,y)
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVT_resume(void)
-{
- /* Do nothing for Linux */
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVT_suspend(void)
-{
- /* Do nothing for Linux */
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVT_exit(void)
-{
- /* Restore signal handlers */
- _PM_restore_kb_mode();
- if (_EVT_mouse_fd) {
- close(_EVT_mouse_fd);
- _EVT_mouse_fd = 0;
- }
-#ifdef USE_OS_JOYSTICK
- if (joystick0_fd) {
- close(joystick0_fd);
- free(axis0);
- free(buts0);
- joystick0_fd = 0;
- }
- if (joystick1_fd) {
- close(joystick1_fd);
- free(axis1);
- free(buts1);
- joystick1_fd = 0;
- }
-#endif
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/linux/event.svga b/board/MAI/bios_emulator/scitech/src/pm/linux/event.svga
deleted file mode 100644
index c0358a0f8a..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/linux/event.svga
+++ /dev/null
@@ -1,1058 +0,0 @@
-/****************************************************************************
-*
-* The SuperVGA Kit - UniVBE Software Development Kit
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: IBM PC (MS DOS)
-*
-* Description: Routines to provide a Linux event queue, which automatically
-* handles keyboard and mouse events for the Linux compatability
-* libraries. Based on the event handling code in the MGL.
-*
-****************************************************************************/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <time.h>
-#include <ctype.h>
-#include <termios.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <errno.h>
-#include <sys/time.h>
-#include <sys/stat.h>
-#include <sys/types.h>
-#include <linux/keyboard.h>
-#include <linux/kd.h>
-#include <linux/vt.h>
-#include <gpm.h>
-#include "pm.h"
-#include "vesavbe.h"
-#include "wdirect.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-#define EVENTQSIZE 100 /* Number of events in event queue */
-
-static int head = -1; /* Head of event queue */
-static int tail = -1; /* Tail of event queue */
-static int freeHead = -1; /* Head of free list */
-static int count = 0; /* No. of items currently in queue */
-static WD_event evtq[EVENTQSIZE]; /* The queue structure itself */
-static int oldMove = -1; /* Previous movement event */
-static int oldKey = -1; /* Previous key repeat event */
-static int mx,my; /* Current mouse position */
-static int xRes,yRes; /* Screen resolution coordinates */
-static void *stateBuf; /* Pointer to console state buffer */
-static int conn; /* GPM file descriptor for mouse handling */
-static int tty_fd; /* File descriptor for /dev/console */
-extern int tty_vc; /* Virtual console ID, from the PM/Pro library */
-static ibool key_down[128]; /* State of all keyboard keys */
-static struct termios old_conf; /* Saved terminal configuration */
-static int oldkbmode; /* and previous keyboard mode */
-struct vt_mode oldvtmode; /* Old virtual terminal mode */
-static int old_flags; /* Old flags for fcntl */
-static ulong key_modifiers; /* Keyboard modifiers */
-static int forbid_vt_release=0;/* Flag to forbid release of VT */
-static int forbid_vt_acquire=0;/* Flag to forbid cature of VT */
-static int oldmode; /* Old SVGA mode saved for VT switch*/
-static int initmode; /* Initial text mode */
-static ibool installed = false; /* True if we are installed */
-static void (_ASMAPI *moveCursor)(int x,int y) = NULL;
-static int (_ASMAPI *suspendAppCallback)(int flags) = NULL;
-
-#if 0
-/* Keyboard Translation table from scancodes to ASCII */
-
-static uchar keyTable[128] =
-"\0\0331234567890-=\010"
-"\011qwertyuiop[]\015"
-"\0asdfghjkl;'`\0\\"
-"zxcvbnm,./\0*\0 \0"
-"\0\0\0\0\0\0\0\0\0\0\0\0" /* Function keys */
-"789-456+1230.\0\0\0\0\0" /* Keypad keys */
-"\0\0\0\0\0\0\0\015\0/";
-
-static uchar keyTableShifted[128] =
-"\0\033!@#$%^&*()_+\010"
-"\011QWERTYUIOP{}\015"
-"\0ASDFGHJKL:\"~\0|"
-"ZXCVBNM<>?\0*\0 \0"
-"\0\0\0\0\0\0\0\0\0\0\0\0" /* Function keys */
-"789-456+1230.\0\0\0\0\0" /* Keypad keys */
-"\0\0\0\0\0\0\0\015\0/";
-#endif
-
-/* Macros to keep track of the CAPS and NUM lock states */
-
-#define EVT_CAPSSTATE 0x0100
-#define EVT_NUMSTATE 0x0200
-
-/* Helper macros for dealing with timers */
-
-#define TICKS_TO_USEC(t) ((t)*65536.0/1.193180)
-#define USEC_TO_TICKS(u) ((u)*1.193180/65536.0)
-
-/* Number of keycodes to read at a time from the console */
-
-#define KBDREADBUFFERSIZE 32
-
-/*---------------------------- Implementation -----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Returns the current time stamp in units of 18.2 ticks per second.
-****************************************************************************/
-static ulong getTimeStamp(void)
-{
- return (ulong)(clock() / (CLOCKS_PER_SEC / 18.2));
-}
-
-/****************************************************************************
-PARAMETERS:
-evt - Event to place onto event queue
-
-REMARKS:
-Adds an event to the event queue by tacking it onto the tail of the event
-queue. This routine assumes that at least one spot is available on the
-freeList for the event to be inserted.
-****************************************************************************/
-static void addEvent(
- WD_event *evt)
-{
- int evtID;
-
- /* Get spot to place the event from the free list */
- evtID = freeHead;
- freeHead = evtq[freeHead].next;
-
- /* Add to the tail of the event queue */
- evt->next = -1;
- evt->prev = tail;
- if (tail != -1)
- evtq[tail].next = evtID;
- else
- head = evtID;
- tail = evtID;
- evtq[evtID] = *evt;
- count++;
-}
-
-/****************************************************************************
-PARAMETERS:
-what - Event code
-message - Event message
-modifiers - keyboard modifiers
-x - Mouse X position at time of event
-y - Mouse Y position at time of event
-but_stat - Mouse button status at time of event
-
-REMARKS:
-Adds a new mouse event to the event queue. This routine is called from
-within the mouse interrupt subroutine, so it must be efficient.
-****************************************************************************/
-static void addMouseEvent(
- uint what,
- uint message,
- int x,
- int y,
- uint but_stat)
-{
- WD_event evt;
-
- if (count < EVENTQSIZE) {
- evt.what = what;
- evt.when = getTimeStamp();
- evt.message = message;
- evt.modifiers = but_stat | key_modifiers;
- evt.where_x = x;
- evt.where_y = y;
- fprintf(stderr, "(%d,%d), buttons %ld\n", x,y, evt.modifiers);
- addEvent(&evt); /* Add to tail of event queue */
- }
-}
-
-/****************************************************************************
-PARAMETERS:
-scancode - Raw keyboard scan code
-modifiers - Keyboard modifiers flags
-
-REMARKS:
-Converts the raw scan code into the appropriate ASCII code using the scan
-code and the keyboard modifier flags.
-****************************************************************************/
-static ulong getKeyMessage(
- uint scancode,
- ulong modifiers)
-{
- ushort code = scancode << 8;
- ushort ascii;
- struct kbentry ke;
-
- ke.kb_index = scancode;
-
- /* Find the basic ASCII code for the scan code */
- if (modifiers & EVT_CAPSSTATE) {
- if (modifiers & EVT_SHIFTKEY)
- ke.kb_table = K_NORMTAB;
- // ascii = tolower(keyTableShifted[scancode]);
- else
- ke.kb_table = K_SHIFTTAB;
- // ascii = toupper(keyTable[scancode]);
- }
- else {
- if (modifiers & EVT_SHIFTKEY)
- ke.kb_table = K_SHIFTTAB;
- // ascii = keyTableShifted[scancode];
- else
- ke.kb_table = K_NORMTAB;
- // ascii = keyTable[scancode];
- }
- if(modifiers & EVT_ALTSTATE)
- ke.kb_table |= K_ALTTAB;
-
- if (ioctl(tty_fd, KDGKBENT, (unsigned long)&ke)) {
- fprintf(stderr, "KDGKBENT at index %d in table %d: ",
- scancode, ke.kb_table);
- return 0;
- }
- ascii = ke.kb_value;
-
- /* Add ASCII code if key is not alt'ed or ctrl'ed */
- if (!(modifiers & (EVT_ALTSTATE | EVT_CTRLSTATE)))
- code |= ascii;
-
- return code;
-}
-
-/****************************************************************************
-PARAMETERS:
-what - Event code
-scancode - Raw scancode of keyboard event to add
-
-REMARKS:
-Adds a new keyboard event to the event queue. We only take KEYUP and
-KEYDOWN event codes, however if a key is already down we convert the KEYDOWN
-to a KEYREPEAT.
-****************************************************************************/
-static void addKeyEvent(
- uint what,
- uint scancode)
-{
- WD_event evt;
-
- if (count < EVENTQSIZE) {
- evt.what = what;
- evt.when = getTimeStamp();
- evt.message = getKeyMessage(scancode,key_modifiers) | 0x10000UL;
- evt.where_x = evt.where_y = 0;
- evt.modifiers = key_modifiers;
- if (evt.what == EVT_KEYUP)
- key_down[scancode] = false;
- else if (evt.what == EVT_KEYDOWN) {
- if (key_down[scancode]) {
- if (oldKey != -1) {
- evtq[oldKey].message += 0x10000UL;
- }
- else {
- evt.what = EVT_KEYREPEAT;
- oldKey = freeHead;
- addEvent(&evt);
- oldMove = -1;
- }
- return;
- }
- key_down[scancode] = true;
- }
-
- addEvent(&evt);
- oldMove = -1;
- }
-}
-
-/****************************************************************************
-PARAMETERS:
-sig - Signal being sent to this signal handler
-
-REMARKS:
-Signal handler for the timer. This routine takes care of periodically
-posting timer events to the event queue.
-****************************************************************************/
-void timerHandler(
- int sig)
-{
- WD_event evt;
-
- if (sig == SIGALRM) {
- if (count < EVENTQSIZE) {
- evt.when = getTimeStamp();
- evt.what = EVT_TIMERTICK;
- evt.message = 0;
- evt.where_x = evt.where_y = 0;
- evt.modifiers = 0;
- addEvent(&evt);
- oldMove = -1;
- oldKey = -1;
- }
- signal(SIGALRM, timerHandler);
- }
-}
-
-/****************************************************************************
-REMARKS:
-Restore the terminal to normal operation on exit
-****************************************************************************/
-static void restore_term(void)
-{
- RMREGS regs;
-
- if (installed) {
- /* Restore text mode and the state of the console */
- regs.x.ax = 0x3;
- PM_int86(0x10,&regs,&regs);
- PM_restoreConsoleState(stateBuf,tty_fd);
-
- /* Restore console to normal operation */
- ioctl(tty_fd, VT_SETMODE, &oldvtmode);
- ioctl(tty_fd, KDSKBMODE, oldkbmode);
- tcsetattr(tty_fd, TCSAFLUSH, &old_conf);
- fcntl(tty_fd,F_SETFL,old_flags &= ~O_NONBLOCK);
- PM_closeConsole(tty_fd);
-
- /* Close the mouse driver */
- close(conn);
-
- /* Flag that we are not no longer installed */
- installed = false;
- }
-}
-
-/****************************************************************************
-REMARKS:
-Signal handler to capture forced program termination conditions so that
-we can clean up properly.
-****************************************************************************/
-static void exitHandler(int sig)
-{
- exit(-1);
-}
-
-/****************************************************************************
-REMARKS:
-Sleep until the virtual terminal is active
-****************************************************************************/
-void wait_vt_active(void)
-{
- while (ioctl(tty_fd, VT_WAITACTIVE, tty_vc) < 0) {
- if ((errno != EAGAIN) && (errno != EINTR)) {
- perror("ioctl(VT_WAITACTIVE)");
- exit(1);
- }
- usleep(150000);
- }
-}
-
-/****************************************************************************
-REMARKS:
-Signal handler called when our virtual terminal has been released and we are
-losing the active focus.
-****************************************************************************/
-static void release_vt_signal(int n)
-{
- forbid_vt_acquire = 1;
- if (forbid_vt_release) {
- forbid_vt_acquire = 0;
- ioctl(tty_fd, VT_RELDISP, 0);
- return;
- }
-
- // TODO: Call the user supplied suspendAppCallback and restore text
- // mode (saving the existing mode so we can restore it).
- //
- // Also if the suspendAppCallback is NULL then we have to
- // ignore the switch request!
- if(suspendAppCallback){
- oldmode = VBE_getVideoMode();
- suspendAppCallback(true);
- VBE_setVideoMode(initmode);
- }
-
- ioctl(tty_fd, VT_RELDISP, 1);
- forbid_vt_acquire = 0;
- wait_vt_active();
-}
-
-/****************************************************************************
-REMARKS:
-Signal handler called when our virtual terminal has been re-aquired and we
-are now regaiing the active focus.
-****************************************************************************/
-static void acquire_vt_signal(int n)
-{
- forbid_vt_release = 1;
- if (forbid_vt_acquire) {
- forbid_vt_release = 0;
- return;
- }
-
- // TODO: Restore the old display mode, call the user suspendAppCallback
- // and and we will be back in graphics mode.
-
- if(suspendAppCallback){
- VBE_setVideoMode(oldmode);
- suspendAppCallback(false);
- }
-
- ioctl(tty_fd, VT_RELDISP, VT_ACKACQ);
- forbid_vt_release = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Function to set the action for a specific signal to call our signal handler.
-****************************************************************************/
-static void set_sigaction(int sig,void (*handler)(int))
-{
- struct sigaction siga;
-
- siga.sa_handler = handler;
- siga.sa_flags = SA_RESTART;
- memset(&(siga.sa_mask), 0, sizeof(sigset_t));
- sigaction(sig, &siga, NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Function to take over control of VT switching so that we can capture
-virtual terminal release and aquire signals, allowing us to properly
-support VT switching while in graphics modes.
-****************************************************************************/
-static void take_vt_control(void)
-{
- struct vt_mode vtmode;
-
- ioctl(tty_fd, VT_GETMODE, &vtmode);
- oldvtmode = vtmode;
- vtmode.mode = VT_PROCESS;
- vtmode.relsig = SIGUSR1;
- vtmode.acqsig = SIGUSR2;
- set_sigaction(SIGUSR1, release_vt_signal);
- set_sigaction(SIGUSR2, acquire_vt_signal);
- ioctl(tty_fd, VT_SETMODE, &oldvtmode);
-}
-
-/****************************************************************************
-REMARKS:
-Set the shift keyboard LED's based on the current keyboard modifiers flags.
-****************************************************************************/
-static void updateLEDStatus(void)
-{
- int state = 0;
- if (key_modifiers & EVT_CAPSSTATE)
- state |= LED_CAP;
- if (key_modifiers & EVT_NUMSTATE)
- state |= LED_NUM;
- ioctl(tty_fd,KDSETLED,state);
-}
-
-/****************************************************************************
-PARAMETERS:
-scancode - Raw scan code to handle
-
-REMARKS:
-Handles the shift key modifiers and keeps track of the shift key states
-so that we can return the correct ASCII codes for the keyboard.
-****************************************************************************/
-static void toggleModifiers(
- int scancode)
-{
- static int caps_down = 0,num_down = 0;
-
- if (scancode & 0x80) {
- /* Handle key-release function */
- scancode &= 0x7F;
- if (scancode == 0x2A || scancode == 0x36)
- key_modifiers &= ~EVT_SHIFTKEY;
- else if (scancode == 0x1D || scancode == 0x61)
- key_modifiers &= ~EVT_CTRLSTATE;
- else if (scancode == 0x38 || scancode == 0x64)
- key_modifiers &= ~EVT_ALTSTATE;
- else if (scancode == 0x3A)
- caps_down = false;
- else if (scancode == 0x45)
- num_down = false;
- }
- else {
- /* Handle key-down function */
- scancode &= 0x7F;
- if (scancode == 0x2A || scancode == 0x36)
- key_modifiers |= EVT_SHIFTKEY;
- else if (scancode == 0x1D || scancode == 0x61)
- key_modifiers |= EVT_CTRLSTATE;
- else if (scancode == 0x38 || scancode == 0x64)
- key_modifiers |= EVT_ALTSTATE;
- else if (scancode == 0x3A) {
- if (!caps_down) {
- key_modifiers ^= EVT_CAPSSTATE;
- updateLEDStatus();
- }
- caps_down = true;
- }
- else if (scancode == 0x45) {
- if (!num_down) {
- key_modifiers ^= EVT_NUMSTATE;
- updateLEDStatus();
- }
- num_down = true;
- }
- }
-}
-
-/***************************************************************************
-REMARKS:
-Returns the number of bits that have changed from 0 to 1
-(a negative value means the number of bits that have changed from 1 to 0)
- **************************************************************************/
-static int compareBits(short a, short b)
-{
- int ret = 0;
- if( (a&1) != (b&1) ) ret += (b&1) ? 1 : -1;
- if( (a&2) != (b&2) ) ret += (b&2) ? 1 : -1;
- if( (a&4) != (b&4) ) ret += (b&4) ? 1 : -1;
- return ret;
-}
-
-/***************************************************************************
-REMARKS:
-Turns off all keyboard state because we can't rely on them anymore as soon
-as we switch VT's
-***************************************************************************/
-static void keyboard_clearstate(void)
-{
- key_modifiers = 0;
- memset(key_down, 0, sizeof(key_down));
-}
-
-/****************************************************************************
-REMARKS:
-Pumps all events from the console event queue into the WinDirect event queue.
-****************************************************************************/
-static void pumpEvents(void)
-{
- static uchar buf[KBDREADBUFFERSIZE];
- static char data[5];
- static int old_buts, old_mx, old_my;
- static struct timeval t;
- fd_set fds;
- int numkeys,i;
- int dx, dy, buts;
-
- /* Read all pending keypresses from keyboard buffer and process */
- while ((numkeys = read(tty_fd, buf, KBDREADBUFFERSIZE)) > 0) {
- for (i = 0; i < numkeys; i++) {
- toggleModifiers(buf[i]);
- if (key_modifiers & EVT_ALTSTATE){
- int fkey = 0;
-
- // Do VT switching here for Alt+Fx keypresses
- switch(buf[i] & 0x7F){
- case 59 ... 68: /* F1 to F10 */
- fkey = (buf[i] & 0x7F) - 58;
- break;
- case 87: /* F11 */
- case 88: /* F12 */
- fkey = (buf[i] & 0x7F) - 76;
- break;
- }
- if(fkey){
- struct vt_stat vts;
- ioctl(tty_fd, VT_GETSTATE, &vts);
-
- if(fkey != vts.v_active){
- keyboard_clearstate();
- ioctl(tty_fd, VT_ACTIVATE, fkey);
- }
- }
- }
-
- if (buf[i] & 0x80)
- addKeyEvent(EVT_KEYUP,buf[i] & 0x7F);
- else
- addKeyEvent(EVT_KEYDOWN,buf[i] & 0x7F);
- }
-
- // TODO: If we want to handle VC switching we will need to do it
- // in here so that we can switch away from the VC and then
- // switch back to it later. Right now VC switching is disabled
- // and in order to enable it we need to save/restore the state
- // of the graphics screen (using the suspendAppCallback and
- // saving/restoring the state of the current display mode).
-
- }
-
- /* Read all pending mouse events and process them */
- if(conn > 0){
- FD_ZERO(&fds);
- FD_SET(conn, &fds);
- t.tv_sec = t.tv_usec = 0L;
- while (select(conn+1, &fds, NULL, NULL, &t) > 0) {
- if(read(conn, data, 5) == 5){
- buts = (~data[0]) & 0x07;
- dx = (char)(data[1]) + (char)(data[3]);
- dy = -((char)(data[2]) + (char)(data[4]));
-
- mx += dx; my += dy;
-
- if (dx || dy)
- addMouseEvent(EVT_MOUSEMOVE, 0, mx, my, buts);
-
- if (buts != old_buts){
- int c = compareBits(buts,old_buts);
- if(c>0)
- addMouseEvent(EVT_MOUSEDOWN, 0, mx, my, buts);
- else if(c<0)
- addMouseEvent(EVT_MOUSEUP, 0, mx, my, buts);
- }
- old_mx = mx; old_my = my;
- old_buts = buts;
- FD_SET(conn, &fds);
- t.tv_sec = t.tv_usec = 0L;
- }
- }
- }
-}
-
-/*------------------------ Public interface routines ----------------------*/
-
-/****************************************************************************
-PARAMETERS:
-which - Which code for event to post
-what - Event code for event to post
-message - Event message
-modifiers - Shift key/mouse button modifiers
-
-RETURNS:
-True if the event was posted, false if queue is full.
-
-REMARKS:
-Posts an event to the event queue. This routine can be used to post any type
-of event into the queue.
-****************************************************************************/
-ibool _WDAPI WD_postEvent(
- ulong which,
- uint what,
- ulong message,
- ulong modifiers)
-{
- WD_event evt;
-
- if (count < EVENTQSIZE) {
- /* Save information in event record */
- evt.which = which;
- evt.what = what;
- evt.when = getTimeStamp();
- evt.message = message;
- evt.modifiers = modifiers;
- addEvent(&evt); /* Add to tail of event queue */
- return true;
- }
- else
- return false;
-}
-
-/****************************************************************************
-PARAMETERS:
-mask - Event mask to use
-
-REMARKS:
-Flushes all the event specified in 'mask' from the event queue.
-****************************************************************************/
-void _WDAPI WD_flushEvent(
- uint mask)
-{
- WD_event evt;
-
- do { /* Flush all events */
- WD_getEvent(&evt,mask);
- } while (evt.what != EVT_NULLEVT);
-}
-
-/****************************************************************************
-PARAMETERS:
-evt - Place to store event
-mask - Event mask to use
-
-REMARKS:
-Halts program execution until a specified event occurs. The event is
-returned. All pending events not in the specified mask will be ignored and
-removed from the queue.
-****************************************************************************/
-void _WDAPI WD_haltEvent(
- WD_event *evt,
- uint mask)
-{
- do { /* Wait for an event */
- WD_getEvent(evt,EVT_EVERYEVT);
- } while (!(evt->what & mask));
-}
-
-/****************************************************************************
-PARAMETERS:
-evt - Place to store event
-mask - Event mask to use
-
-RETURNS:
-True if an event was pending.
-
-REMARKS:
-Retrieves the next pending event defined in 'mask' from the event queue.
-The event queue is adjusted to reflect the new state after the event has
-been removed.
-****************************************************************************/
-ibool _WDAPI WD_getEvent(
- WD_event *evt,
- uint mask)
-{
- int evtID,next,prev;
-
- pumpEvents();
- if (moveCursor)
- moveCursor(mx,my); /* Move the mouse cursor */
- evt->what = EVT_NULLEVT; /* Default to null event */
-
- if (count) {
- for (evtID = head; evtID != -1; evtID = evtq[evtID].next) {
- if (evtq[evtID].what & mask)
- break; /* Found an event */
- }
- if (evtID == -1)
- return false; /* Event was not found */
- next = evtq[evtID].next;
- prev = evtq[evtID].prev;
- if (prev != -1)
- evtq[prev].next = next;
- else
- head = next;
- if (next != -1)
- evtq[next].prev = prev;
- else
- tail = prev;
- *evt = evtq[evtID]; /* Return the event */
- evtq[evtID].next = freeHead; /* and return to free list */
- freeHead = evtID;
- count--;
- if (evt->what == EVT_MOUSEMOVE)
- oldMove = -1;
- if (evt->what == EVT_KEYREPEAT)
- oldKey = -1;
- }
- return evt->what != EVT_NULLEVT;
-}
-
-/****************************************************************************
-PARAMETERS:
-evt - Place to store event
-mask - Event mask to use
-
-RETURNS:
-True if an event is pending.
-
-REMARKS:
-Peeks at the next pending event defined in 'mask' in the event queue. The
-event is not removed from the event queue.
-****************************************************************************/
-ibool _WDAPI WD_peekEvent(
- WD_event *evt,
- uint mask)
-{
- int evtID;
-
- pumpEvents();
- if (moveCursor)
- moveCursor(mx,my); /* Move the mouse cursor */
- evt->what = EVT_NULLEVT; /* Default to null event */
-
- if (count) {
- for (evtID = head; evtID != -1; evtID = evtq[evtID].next) {
- if (evtq[evtID].what & mask)
- break; /* Found an event */
- }
- if (evtID == -1)
- return false; /* Event was not found */
-
- *evt = evtq[evtID]; /* Return the event */
- }
- return evt->what != EVT_NULLEVT;
-}
-
-/****************************************************************************
-PARAMETERS:
-hwndMain - Handle to main window
-_xRes - X resolution of graphics mode to be used
-_yRes - Y resolulion of graphics mode to be used
-
-RETURNS:
-Handle to the fullscreen event window if (we return hwndMain on Linux)
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling
-ISR to be called whenever any button's are pressed or released. We also
-build the free list of events in the event queue.
-****************************************************************************/
-WD_HWND _WDAPI WD_startFullScreen(
- WD_HWND hwndMain,
- int _xRes,
- int _yRes)
-{
- int i;
- struct termios conf;
- if (!installed) {
- Gpm_Connect gpm;
-
- /* Build free list, and initialise global data structures */
- for (i = 0; i < EVENTQSIZE; i++)
- evtq[i].next = i+1;
- evtq[EVENTQSIZE-1].next = -1; /* Terminate list */
- count = freeHead = 0;
- head = tail = -1;
- oldMove = -1;
- oldKey = -1;
- xRes = _xRes;
- yRes = _yRes;
-
- /* Open the console device and initialise it for raw mode */
- tty_fd = PM_openConsole();
-
- /* Wait until virtual terminal is active and take over control */
- wait_vt_active();
- take_vt_control();
-
- /* Initialise keyboard handling to raw mode */
- if (ioctl(tty_fd, KDGKBMODE, &oldkbmode)) {
- printf("WD_startFullScreen: cannot get keyboard mode.\n");
- exit(-1);
- }
- old_flags = fcntl(tty_fd,F_GETFL);
- fcntl(tty_fd,F_SETFL,old_flags |= O_NONBLOCK);
- tcgetattr(tty_fd, &conf);
- old_conf = conf;
- conf.c_lflag &= ~(ICANON | ECHO | ECHOE | ECHOK | ECHONL | NOFLSH | ISIG);
- conf.c_iflag &= ~(ISTRIP | IGNCR | ICRNL | INLCR | BRKINT | PARMRK | INPCK | IUCLC | IXON | IXOFF);
- conf.c_iflag |= (IGNBRK | IGNPAR);
- conf.c_cc[VMIN] = 1;
- conf.c_cc[VTIME] = 0;
- conf.c_cc[VSUSP] = 0;
- tcsetattr(tty_fd, TCSAFLUSH, &conf);
- ioctl(tty_fd, KDSKBMODE, K_MEDIUMRAW);
-
- /* Clear the keyboard state information */
- memset(key_down, 0, sizeof(key_down));
- ioctl(tty_fd,KDSETLED,key_modifiers = 0);
-
- /* Initialize the mouse connection
- The user *MUST* run gpm with the option -R for this to work (or have a MouseSystems mouse)
- */
- if(Gpm_Open(&gpm,0) > 0){ /* GPM available */
- if ((conn = open(GPM_NODE_FIFO,O_RDONLY|O_SYNC)) < 0)
- fprintf(stderr,"WD_startFullScreen: Can't open mouse connection.\n");
- }else{
- fprintf(stderr,"Warning: when not using gpm -R, only MouseSystems mice are currently supported.\n");
- if ((conn = open("/dev/mouse",O_RDONLY|O_SYNC)) < 0)
- fprintf(stderr,"WD_startFullScreen: Can't open /dev/mouse.\n");
- }
- Gpm_Close();
-
- /* TODO: Scale the mouse coordinates to the specific resolution */
-
- /* Save the state of the console */
- if ((stateBuf = malloc(PM_getConsoleStateSize())) == NULL) {
- printf("Out of memory!\n");
- exit(-1);
- }
- PM_saveConsoleState(stateBuf,tty_fd);
- initmode = VBE_getVideoMode();
-
- /* Initialize the signal handler for timer events */
- signal(SIGALRM, timerHandler);
-
- /* Capture termination signals so we can clean up properly */
- signal(SIGTERM, exitHandler);
- signal(SIGINT, exitHandler);
- signal(SIGQUIT, exitHandler);
- atexit(restore_term);
-
- /* Signal that we are installed */
- installed = true;
- }
- return hwndMain;
-}
-
-/****************************************************************************
-REMARKS:
-Lets the library know when fullscreen graphics mode has been initialized so
-that we can properly scale the mouse driver coordinates.
-****************************************************************************/
-void _WDAPI WD_inFullScreen(void)
-{
- /* Nothing to do in here */
-}
-
-/****************************************************************************
-REMARKS:
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void _WDAPI WD_restoreGDI(void)
-{
- restore_term();
-}
-
-/****************************************************************************
-PARAMETERS:
-ticks - Number of ticks between timer tick messages
-
-RETURNS:
-Previous value for the timer tick event spacing.
-
-REMARKS:
-The event module will automatically generate periodic timer tick events for
-you, with 'ticks' between each event posting. If you set the value of
-'ticks' to 0, the timer tick events are turned off.
-****************************************************************************/
-int _WDAPI WD_setTimerTick(
- int ticks)
-{
- int old;
- struct itimerval tim;
- long ms = TICKS_TO_USEC(ticks);
-
- getitimer(ITIMER_REAL, &tim);
- old = USEC_TO_TICKS(tim.it_value.tv_sec*1000000.0 + tim.it_value.tv_usec);
- tim.it_interval.tv_sec = ms / 1000000;
- tim.it_interval.tv_usec = ms % 1000000;
- setitimer(ITIMER_REAL, &tim, NULL);
- return old;
-}
-
-/****************************************************************************
-PARAMETERS:
-saveState - Address of suspend app callback to register
-
-REMARKS:
-Registers a user application supplied suspend application callback so that
-we can properly handle virtual terminal switching.
-****************************************************************************/
-void _WDAPI WD_setSuspendAppCallback(
- int (_ASMAPI *saveState)(int flags))
-{
- suspendAppCallback = saveState;
-}
-
-/****************************************************************************
-PARAMETERS:
-x - New X coordinate to move the mouse cursor to
-y - New Y coordinate to move the mouse cursor to
-
-REMARKS:
-Moves to mouse cursor to the specified coordinate.
-****************************************************************************/
-void _WDAPI WD_setMousePos(
- int x,
- int y)
-{
- mx = x;
- my = y;
-}
-
-/****************************************************************************
-PARAMETERS:
-x - Place to store X coordinate of mouse cursor
-y - Place to store Y coordinate of mouse cursor
-
-REMARKS:
-Reads the current mouse cursor location int *screen* coordinates.
-****************************************************************************/
-void _WDAPI WD_getMousePos(
- int *x,
- int *y)
-{
- *x = mx;
- *y = my;
-}
-
-/****************************************************************************
-PARAMETERS:
-mcb - Address of mouse callback function
-
-REMARKS:
-Registers an application supplied mouse callback function that is called
-whenever the mouse cursor moves.
-****************************************************************************/
-void _WDAPI WD_setMouseCallback(
- void (_ASMAPI *mcb)(int x,int y))
-{
- moveCursor = mcb;
-}
-
-/****************************************************************************
-PARAMETERS:
-xRes - New X resolution of graphics mode
-yRes - New Y resolution of graphics mode
-
-REMARKS:
-This is called to inform the event handling code that the screen resolution
-has changed so that the mouse coordinates can be scaled appropriately.
-****************************************************************************/
-void _WDAPI WD_changeResolution(
- int xRes,
- int yRes)
-{
- // Gpm_FitValues(xRes, yRes); // ??
-}
-
-/****************************************************************************
-PARAMETERS:
-scancode - Scan code to check if a key is down
-
-REMARKS:
-Determines if a particular key is down based on the scan code for the key.
-****************************************************************************/
-ibool _WDAPI WD_isKeyDown(
- uchar scancode)
-{
- return key_down[scancode];
-}
-
-/****************************************************************************
-REMARKS:
-Determines if the application needs to run in safe mode. Not necessary for
-anything but broken Windows 95 display drivers so we return false for
-Linux.
-****************************************************************************/
-int _WDAPI WD_isSafeMode(void)
-{
- return false;
-}
-
-
diff --git a/board/MAI/bios_emulator/scitech/src/pm/linux/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/linux/oshdr.h
deleted file mode 100644
index eadedfb137..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/linux/oshdr.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/****************************************************************************
-*
-* SciTech Multi-platform Graphics Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Linux
-*
-* Description: Include all the OS specific header files.
-*
-****************************************************************************/
-
-#include <fcntl.h>
-#include <sys/time.h>
-#include <sys/ioctl.h>
-#include <sys/stat.h>
-#include <time.h>
-#include <linux/keyboard.h>
-#include <linux/kd.h>
-#include <linux/vt.h>
-#include <linux/fs.h>
-#ifdef USE_OS_JOYSTICK
-#include <linux/joystick.h>
-#endif
-#include <termios.h>
-#include <signal.h>
-#include <unistd.h>
-#include <ctype.h>
-#include <stdlib.h>
-
-/* Internal global variables */
-
-extern int _PM_console_fd,_PM_leds,_PM_modifiers;
-
-/* Internal function prototypes */
-
-void _PM_restore_kb_mode(void);
-void _PM_keyboard_rawmode(void);
-
-/* Linux needs the generic joystick scaling code */
-
-#define NEED_SCALE_JOY_AXIS
diff --git a/board/MAI/bios_emulator/scitech/src/pm/linux/pm.c b/board/MAI/bios_emulator/scitech/src/pm/linux/pm.c
deleted file mode 100644
index c12a83500a..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/linux/pm.c
+++ /dev/null
@@ -1,1809 +0,0 @@
-;/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Portions copyright (C) Josh Vanderhoof
-*
-* Language: ANSI C
-* Environment: Linux
-*
-* Description: Implementation for the OS Portability Manager Library, which
-* contains functions to implement OS specific services in a
-* generic, cross platform API. Porting the OS Portability
-* Manager library is the first step to porting any SciTech
-* products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/mman.h>
-#include <sys/kd.h>
-#include <sys/ioctl.h>
-#include <sys/stat.h>
-#include <sys/vt.h>
-#include <sys/wait.h>
-#include <sys/types.h>
-#include <sys/time.h>
-#include <unistd.h>
-#include <termios.h>
-#include <fcntl.h>
-#include <syscall.h>
-#include <signal.h>
-#include <time.h>
-#include <ctype.h>
-#include <errno.h>
-#include <asm/io.h>
-#include <asm/types.h>
-#ifdef ENABLE_MTRR
-#include <asm/mtrr.h>
-#endif
-#include <asm/vm86.h>
-#ifdef __GLIBC__
-#include <sys/perm.h>
-#endif
-
-/*--------------------------- Global variables ----------------------------*/
-
-#define REAL_MEM_BASE ((void *)0x10000)
-#define REAL_MEM_SIZE 0x10000
-#define REAL_MEM_BLOCKS 0x100
-#define DEFAULT_VM86_FLAGS (IF_MASK | IOPL_MASK)
-#define DEFAULT_STACK_SIZE 0x1000
-#define RETURN_TO_32_INT 255
-
-/* Quick and dirty fix for vm86() syscall from lrmi 0.6 */
-static int
-vm86(struct vm86_struct *vm)
- {
- int r;
-#ifdef __PIC__
- asm volatile (
- "pushl %%ebx\n\t"
- "movl %2, %%ebx\n\t"
- "int $0x80\n\t"
- "popl %%ebx"
- : "=a" (r)
- : "0" (113), "r" (vm));
-#else
- asm volatile (
- "int $0x80"
- : "=a" (r)
- : "0" (113), "b" (vm));
-#endif
- return r;
- }
-
-
-static struct {
- int ready;
- unsigned short ret_seg, ret_off;
- unsigned short stack_seg, stack_off;
- struct vm86_struct vm;
- } context = {0};
-
-struct mem_block {
- unsigned int size : 20;
- unsigned int free : 1;
- };
-
-static struct {
- int ready;
- int count;
- struct mem_block blocks[REAL_MEM_BLOCKS];
- } mem_info = {0};
-
-int _PM_console_fd = -1;
-int _PM_leds = 0,_PM_modifiers = 0;
-static ibool inited = false;
-static int tty_vc = 0;
-static int console_count = 0;
-static int startup_vc;
-static int fd_mem = 0;
-static ibool in_raw_mode = false;
-#ifdef ENABLE_MTRR
-static int mtrr_fd;
-#endif
-static uint VESABuf_len = 1024; /* Length of the VESABuf buffer */
-static void *VESABuf_ptr = NULL; /* Near pointer to VESABuf */
-static uint VESABuf_rseg; /* Real mode segment of VESABuf */
-static uint VESABuf_roff; /* Real mode offset of VESABuf */
-#ifdef TRACE_IO
-static ulong traceAddr;
-#endif
-
-static void (PMAPIP fatalErrorCleanup)(void) = NULL;
-
-/*----------------------------- Implementation ----------------------------*/
-
-#ifdef TRACE_IO
-extern void printk(char *msg,...);
-#endif
-
-static inline void port_out(int value, int port)
-{
-#ifdef TRACE_IO
- printk("%04X:%04X: outb.%04X <- %02X\n", traceAddr >> 16, traceAddr & 0xFFFF, (ushort)port, (uchar)value);
-#endif
- asm volatile ("outb %0,%1"
- ::"a" ((unsigned char) value), "d"((unsigned short) port));
-}
-
-static inline void port_outw(int value, int port)
-{
-#ifdef TRACE_IO
- printk("%04X:%04X: outw.%04X <- %04X\n", traceAddr >> 16,traceAddr & 0xFFFF, (ushort)port, (ushort)value);
-#endif
- asm volatile ("outw %0,%1"
- ::"a" ((unsigned short) value), "d"((unsigned short) port));
-}
-
-static inline void port_outl(int value, int port)
-{
-#ifdef TRACE_IO
- printk("%04X:%04X: outl.%04X <- %08X\n", traceAddr >> 16,traceAddr & 0xFFFF, (ushort)port, (ulong)value);
-#endif
- asm volatile ("outl %0,%1"
- ::"a" ((unsigned long) value), "d"((unsigned short) port));
-}
-
-static inline unsigned int port_in(int port)
-{
- unsigned char value;
- asm volatile ("inb %1,%0"
- :"=a" ((unsigned char)value)
- :"d"((unsigned short) port));
-#ifdef TRACE_IO
- printk("%04X:%04X: inb.%04X -> %02X\n", traceAddr >> 16,traceAddr & 0xFFFF, (ushort)port, (uchar)value);
-#endif
- return value;
-}
-
-static inline unsigned int port_inw(int port)
-{
- unsigned short value;
- asm volatile ("inw %1,%0"
- :"=a" ((unsigned short)value)
- :"d"((unsigned short) port));
-#ifdef TRACE_IO
- printk("%04X:%04X: inw.%04X -> %04X\n", traceAddr >> 16,traceAddr & 0xFFFF, (ushort)port, (ushort)value);
-#endif
- return value;
-}
-
-static inline unsigned int port_inl(int port)
-{
- unsigned long value;
- asm volatile ("inl %1,%0"
- :"=a" ((unsigned long)value)
- :"d"((unsigned short) port));
-#ifdef TRACE_IO
- printk("%04X:%04X: inl.%04X -> %08X\n", traceAddr >> 16,traceAddr & 0xFFFF, (ushort)port, (ulong)value);
-#endif
- return value;
-}
-
-static int real_mem_init(void)
-{
- void *m;
- int fd_zero;
-
- if (mem_info.ready)
- return 1;
-
- if ((fd_zero = open("/dev/zero", O_RDONLY)) == -1)
- PM_fatalError("You must have root privledges to run this program!");
- if ((m = mmap((void *)REAL_MEM_BASE, REAL_MEM_SIZE,
- PROT_READ | PROT_WRITE | PROT_EXEC,
- MAP_FIXED | MAP_PRIVATE, fd_zero, 0)) == (void *)-1) {
- close(fd_zero);
- PM_fatalError("You must have root privledges to run this program!");
- }
- mem_info.ready = 1;
- mem_info.count = 1;
- mem_info.blocks[0].size = REAL_MEM_SIZE;
- mem_info.blocks[0].free = 1;
- return 1;
-}
-
-static void insert_block(int i)
-{
- memmove(
- mem_info.blocks + i + 1,
- mem_info.blocks + i,
- (mem_info.count - i) * sizeof(struct mem_block));
- mem_info.count++;
-}
-
-static void delete_block(int i)
-{
- mem_info.count--;
-
- memmove(
- mem_info.blocks + i,
- mem_info.blocks + i + 1,
- (mem_info.count - i) * sizeof(struct mem_block));
-}
-
-static inline void set_bit(unsigned int bit, void *array)
-{
- unsigned char *a = array;
- a[bit / 8] |= (1 << (bit % 8));
-}
-
-static inline unsigned int get_int_seg(int i)
-{
- return *(unsigned short *)(i * 4 + 2);
-}
-
-static inline unsigned int get_int_off(int i)
-{
- return *(unsigned short *)(i * 4);
-}
-
-static inline void pushw(unsigned short i)
-{
- struct vm86_regs *r = &context.vm.regs;
- r->esp -= 2;
- *(unsigned short *)(((unsigned int)r->ss << 4) + r->esp) = i;
-}
-
-ibool PMAPI PM_haveBIOSAccess(void)
-{ return true; }
-
-void PMAPI PM_init(void)
-{
- void *m;
- uint r_seg,r_off;
-
- if (inited)
- return;
-
- /* Map the Interrupt Vectors (0x0 - 0x400) + BIOS data (0x400 - 0x502)
- * and the physical framebuffer and ROM images from (0xa0000 - 0x100000)
- */
- real_mem_init();
- if (!fd_mem && (fd_mem = open("/dev/mem", O_RDWR)) == -1) {
- PM_fatalError("You must have root privileges to run this program!");
- }
- if ((m = mmap((void *)0, 0x502,
- PROT_READ | PROT_WRITE | PROT_EXEC,
- MAP_FIXED | MAP_PRIVATE, fd_mem, 0)) == (void *)-1) {
- PM_fatalError("You must have root privileges to run this program!");
- }
- if ((m = mmap((void *)0xA0000, 0xC0000 - 0xA0000,
- PROT_READ | PROT_WRITE,
- MAP_FIXED | MAP_SHARED, fd_mem, 0xA0000)) == (void *)-1) {
- PM_fatalError("You must have root privileges to run this program!");
- }
- if ((m = mmap((void *)0xC0000, 0xD0000 - 0xC0000,
- PROT_READ | PROT_WRITE | PROT_EXEC,
- MAP_FIXED | MAP_PRIVATE, fd_mem, 0xC0000)) == (void *)-1) {
- PM_fatalError("You must have root privileges to run this program!");
- }
- if ((m = mmap((void *)0xD0000, 0x100000 - 0xD0000,
- PROT_READ | PROT_WRITE,
- MAP_FIXED | MAP_SHARED, fd_mem, 0xD0000)) == (void *)-1) {
- PM_fatalError("You must have root privileges to run this program!");
- }
- inited = 1;
-
- /* Allocate a stack */
- m = PM_allocRealSeg(DEFAULT_STACK_SIZE,&r_seg,&r_off);
- context.stack_seg = r_seg;
- context.stack_off = r_off+DEFAULT_STACK_SIZE;
-
- /* Allocate the return to 32 bit routine */
- m = PM_allocRealSeg(2,&r_seg,&r_off);
- context.ret_seg = r_seg;
- context.ret_off = r_off;
- ((uchar*)m)[0] = 0xCD; /* int opcode */
- ((uchar*)m)[1] = RETURN_TO_32_INT;
- memset(&context.vm, 0, sizeof(context.vm));
-
- /* Enable kernel emulation of all ints except RETURN_TO_32_INT */
- memset(&context.vm.int_revectored, 0, sizeof(context.vm.int_revectored));
- set_bit(RETURN_TO_32_INT, &context.vm.int_revectored);
- context.ready = 1;
-#ifdef ENABLE_MTRR
- mtrr_fd = open("/dev/cpu/mtrr", O_RDWR, 0);
- if (mtrr_fd < 0)
- mtrr_fd = open("/proc/mtrr", O_RDWR, 0);
-#endif
- /* Enable I/O permissions to directly access I/O ports. We break the
- * allocation into two parts, one for the ports from 0-0x3FF and
- * another for the remaining ports up to 0xFFFF. Standard Linux kernels
- * only allow the first 0x400 ports to be enabled, so to enable all
- * 65536 ports you need a patched kernel that will enable the full
- * 8Kb I/O permissions bitmap.
- */
-#ifndef TRACE_IO
- ioperm(0x0,0x400,1);
- ioperm(0x400,0x10000-0x400,1);
-#endif
- iopl(3);
-}
-
-long PMAPI PM_getOSType(void)
-{ return _OS_LINUX; }
-
-int PMAPI PM_getModeType(void)
-{ return PM_386; }
-
-void PMAPI PM_backslash(char *s)
-{
- uint pos = strlen(s);
- if (s[pos-1] != '/') {
- s[pos] = '/';
- s[pos+1] = '\0';
- }
-}
-
-void PMAPI PM_setFatalErrorCleanup(
- void (PMAPIP cleanup)(void))
-{
- fatalErrorCleanup = cleanup;
-}
-
-void PMAPI PM_fatalError(const char *msg)
-{
- if (fatalErrorCleanup)
- fatalErrorCleanup();
- fprintf(stderr,"%s\n", msg);
- fflush(stderr);
- exit(1);
-}
-
-static void ExitVBEBuf(void)
-{
- if (VESABuf_ptr)
- PM_freeRealSeg(VESABuf_ptr);
- VESABuf_ptr = 0;
-}
-
-void * PMAPI PM_getVESABuf(uint *len,uint *rseg,uint *roff)
-{
- if (!VESABuf_ptr) {
- /* Allocate a global buffer for communicating with the VESA VBE */
- if ((VESABuf_ptr = PM_allocRealSeg(VESABuf_len, &VESABuf_rseg, &VESABuf_roff)) == NULL)
- return NULL;
- atexit(ExitVBEBuf);
- }
- *len = VESABuf_len;
- *rseg = VESABuf_rseg;
- *roff = VESABuf_roff;
- return VESABuf_ptr;
-}
-
-/* New raw console based getch and kbhit functions */
-
-#define KB_CAPS LED_CAP /* 4 */
-#define KB_NUMLOCK LED_NUM /* 2 */
-#define KB_SCROLL LED_SCR /* 1 */
-#define KB_SHIFT 8
-#define KB_CONTROL 16
-#define KB_ALT 32
-
-/* Structure used to save the keyboard mode to disk. We save it to disk
- * so that we can properly restore the mode later if the program crashed.
- */
-
-typedef struct {
- struct termios termios;
- int kb_mode;
- int leds;
- int flags;
- int startup_vc;
- } keyboard_mode;
-
-/* Name of the file used to save keyboard mode information */
-
-#define KBMODE_DAT "kbmode.dat"
-
-/****************************************************************************
-REMARKS:
-Open the keyboard mode file on disk.
-****************************************************************************/
-static FILE *open_kb_mode(
- char *mode,
- char *path)
-{
- if (!PM_findBPD("graphics.bpd",path))
- return NULL;
- PM_backslash(path);
- strcat(path,KBMODE_DAT);
- return fopen(path,mode);
-}
-
-/****************************************************************************
-REMARKS:
-Restore the keyboard to normal mode
-****************************************************************************/
-void _PM_restore_kb_mode(void)
-{
- FILE *kbmode;
- keyboard_mode mode;
- char path[PM_MAX_PATH];
-
- if (_PM_console_fd != -1 && (kbmode = open_kb_mode("rb",path)) != NULL) {
- if (fread(&mode,1,sizeof(mode),kbmode) == sizeof(mode)) {
- if (mode.startup_vc > 0)
- ioctl(_PM_console_fd, VT_ACTIVATE, mode.startup_vc);
- ioctl(_PM_console_fd, KDSKBMODE, mode.kb_mode);
- ioctl(_PM_console_fd, KDSETLED, mode.leds);
- tcsetattr(_PM_console_fd, TCSAFLUSH, &mode.termios);
- fcntl(_PM_console_fd,F_SETFL,mode.flags);
- }
- fclose(kbmode);
- unlink(path);
- in_raw_mode = false;
- }
-}
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _PM_abort(
- int signo)
-{
- char buf[80];
-
- sprintf(buf,"Terminating on signal %d",signo);
- _PM_restore_kb_mode();
- PM_fatalError(buf);
-}
-
-/****************************************************************************
-REMARKS:
-Put the keyboard into raw mode
-****************************************************************************/
-void _PM_keyboard_rawmode(void)
-{
- struct termios conf;
- FILE *kbmode;
- keyboard_mode mode;
- char path[PM_MAX_PATH];
- int i;
- static int sig_list[] = {
- SIGHUP,
- SIGINT,
- SIGQUIT,
- SIGILL,
- SIGTRAP,
- SIGABRT,
- SIGIOT,
- SIGBUS,
- SIGFPE,
- SIGKILL,
- SIGSEGV,
- SIGTERM,
- };
-
- if ((kbmode = open_kb_mode("rb",path)) == NULL) {
- if ((kbmode = open_kb_mode("wb",path)) == NULL)
- PM_fatalError("Unable to open kbmode.dat file for writing!");
- if (ioctl(_PM_console_fd, KDGKBMODE, &mode.kb_mode))
- perror("KDGKBMODE");
- ioctl(_PM_console_fd, KDGETLED, &mode.leds);
- _PM_leds = mode.leds & 0xF;
- _PM_modifiers = 0;
- tcgetattr(_PM_console_fd, &mode.termios);
- conf = mode.termios;
- conf.c_lflag &= ~(ICANON | ECHO | ISIG);
- conf.c_iflag &= ~(ISTRIP | IGNCR | ICRNL | INLCR | BRKINT | PARMRK | INPCK | IUCLC | IXON | IXOFF);
- conf.c_iflag |= (IGNBRK | IGNPAR);
- conf.c_cc[VMIN] = 1;
- conf.c_cc[VTIME] = 0;
- conf.c_cc[VSUSP] = 0;
- tcsetattr(_PM_console_fd, TCSAFLUSH, &conf);
- mode.flags = fcntl(_PM_console_fd,F_GETFL);
- if (ioctl(_PM_console_fd, KDSKBMODE, K_MEDIUMRAW))
- perror("KDSKBMODE");
- atexit(_PM_restore_kb_mode);
- for (i = 0; i < sizeof(sig_list)/sizeof(sig_list[0]); i++)
- signal(sig_list[i], _PM_abort);
- mode.startup_vc = startup_vc;
- if (fwrite(&mode,1,sizeof(mode),kbmode) != sizeof(mode))
- PM_fatalError("Error writing kbmode.dat!");
- fclose(kbmode);
- in_raw_mode = true;
- }
-}
-
-int PMAPI PM_kbhit(void)
-{
- fd_set s;
- struct timeval tv = { 0, 0 };
-
- if (console_count == 0)
- PM_fatalError("You *must* open a console before using PM_kbhit!");
- if (!in_raw_mode)
- _PM_keyboard_rawmode();
- FD_ZERO(&s);
- FD_SET(_PM_console_fd, &s);
- return select(_PM_console_fd+1, &s, NULL, NULL, &tv) > 0;
-}
-
-int PMAPI PM_getch(void)
-{
- static uchar c;
- int release;
- static struct kbentry ke;
-
- if (console_count == 0)
- PM_fatalError("You *must* open a console before using PM_getch!");
- if (!in_raw_mode)
- _PM_keyboard_rawmode();
- while (read(_PM_console_fd, &c, 1) > 0) {
- release = c & 0x80;
- c &= 0x7F;
- if (release) {
- switch(c){
- case 42: case 54: /* Shift */
- _PM_modifiers &= ~KB_SHIFT;
- break;
- case 29: case 97: /* Control */
- _PM_modifiers &= ~KB_CONTROL;
- break;
- case 56: case 100: /* Alt / AltGr */
- _PM_modifiers &= ~KB_ALT;
- break;
- }
- continue;
- }
- switch (c) {
- case 42: case 54: /* Shift */
- _PM_modifiers |= KB_SHIFT;
- break;
- case 29: case 97: /* Control */
- _PM_modifiers |= KB_CONTROL;
- break;
- case 56: case 100: /* Alt / AltGr */
- _PM_modifiers |= KB_ALT;
- break;
- case 58: /* Caps Lock */
- _PM_modifiers ^= KB_CAPS;
- ioctl(_PM_console_fd, KDSETLED, _PM_modifiers & 7);
- break;
- case 69: /* Num Lock */
- _PM_modifiers ^= KB_NUMLOCK;
- ioctl(_PM_console_fd, KDSETLED, _PM_modifiers & 7);
- break;
- case 70: /* Scroll Lock */
- _PM_modifiers ^= KB_SCROLL;
- ioctl(_PM_console_fd, KDSETLED, _PM_modifiers & 7);
- break;
- case 28:
- return 0x1C;
- default:
- ke.kb_index = c;
- ke.kb_table = 0;
- if ((_PM_modifiers & KB_SHIFT) || (_PM_modifiers & KB_CAPS))
- ke.kb_table |= K_SHIFTTAB;
- if (_PM_modifiers & KB_ALT)
- ke.kb_table |= K_ALTTAB;
- ioctl(_PM_console_fd, KDGKBENT, (ulong)&ke);
- c = ke.kb_value & 0xFF;
- return c;
- }
- }
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Sleep until the virtual terminal is active
-****************************************************************************/
-static void wait_vt_active(
- int _PM_console_fd)
-{
- while (ioctl(_PM_console_fd, VT_WAITACTIVE, tty_vc) < 0) {
- if ((errno != EAGAIN) && (errno != EINTR)) {
- perror("ioctl(VT_WAITACTIVE)");
- exit(1);
- }
- usleep(150000);
- }
-}
-
-/****************************************************************************
-REMARKS:
-Checks the owner of the specified virtual console.
-****************************************************************************/
-static int check_owner(
- int vc)
-{
- struct stat sbuf;
- char fname[30];
-
- sprintf(fname, "/dev/tty%d", vc);
- if ((stat(fname, &sbuf) >= 0) && (getuid() == sbuf.st_uid))
- return 1;
- printf("You must be the owner of the current console to use this program.\n");
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Checks if the console is currently in graphics mode, and if so we forcibly
-restore it back to text mode again. This handles the case when a Nucleus or
-MGL program crashes and leaves the console in graphics mode. Running the
-textmode utility (or any other Nucleus/MGL program) via a telnet session
-into the machine will restore it back to normal.
-****************************************************************************/
-static void restore_text_console(
- int console_id)
-{
- if (ioctl(console_id, KDSETMODE, KD_TEXT) < 0)
- LOGWARN("ioctl(KDSETMODE) failed");
- _PM_restore_kb_mode();
-}
-
-/****************************************************************************
-REMARKS:
-Opens up the console device for output by finding an appropriate virutal
-console that we can run on.
-****************************************************************************/
-PM_HWND PMAPI PM_openConsole(
- PM_HWND hwndUser,
- int device,
- int xRes,
- int yRes,
- int bpp,
- ibool fullScreen)
-{
- struct vt_mode vtm;
- struct vt_stat vts;
- struct stat sbuf;
- char fname[30];
-
- /* Check if we have already opened the console */
- if (console_count++)
- return _PM_console_fd;
-
- /* Now, it would be great if we could use /dev/tty and see what it is
- * connected to. Alas, we cannot find out reliably what VC /dev/tty is
- * bound to. Thus we parse stdin through stderr for a reliable VC.
- */
- startup_vc = 0;
- for (_PM_console_fd = 0; _PM_console_fd < 3; _PM_console_fd++) {
- if (fstat(_PM_console_fd, &sbuf) < 0)
- continue;
- if (ioctl(_PM_console_fd, VT_GETMODE, &vtm) < 0)
- continue;
- if ((sbuf.st_rdev & 0xFF00) != 0x400)
- continue;
- if (!(sbuf.st_rdev & 0xFF))
- continue;
- tty_vc = sbuf.st_rdev & 0xFF;
- restore_text_console(_PM_console_fd);
- return _PM_console_fd;
- }
- if ((_PM_console_fd = open("/dev/console", O_RDWR)) < 0) {
- printf("open_dev_console: can't open /dev/console \n");
- exit(1);
- }
- if (ioctl(_PM_console_fd, VT_OPENQRY, &tty_vc) < 0)
- goto Error;
- if (tty_vc <= 0)
- goto Error;
- sprintf(fname, "/dev/tty%d", tty_vc);
- close(_PM_console_fd);
-
- /* Change our control terminal */
- setsid();
-
- /* We must use RDWR to allow for output... */
- if (((_PM_console_fd = open(fname, O_RDWR)) >= 0) &&
- (ioctl(_PM_console_fd, VT_GETSTATE, &vts) >= 0)) {
- if (!check_owner(vts.v_active))
- goto Error;
- restore_text_console(_PM_console_fd);
-
- /* Success, redirect all stdios */
- fflush(stdin);
- fflush(stdout);
- fflush(stderr);
- close(0);
- close(1);
- close(2);
- dup(_PM_console_fd);
- dup(_PM_console_fd);
- dup(_PM_console_fd);
-
- /* clear screen and switch to it */
- fwrite("\e[H\e[J", 6, 1, stderr);
- fflush(stderr);
- if (tty_vc != vts.v_active) {
- startup_vc = vts.v_active;
- ioctl(_PM_console_fd, VT_ACTIVATE, tty_vc);
- wait_vt_active(_PM_console_fd);
- }
- }
- return _PM_console_fd;
-
-Error:
- if (_PM_console_fd > 2)
- close(_PM_console_fd);
- console_count = 0;
- PM_fatalError(
- "Not running in a graphics capable console,\n"
- "and unable to find one.\n");
- return -1;
-}
-
-#define FONT_C 0x10000 /* 64KB for font data */
-
-/****************************************************************************
-REMARKS:
-Returns the size of the console state buffer.
-****************************************************************************/
-int PMAPI PM_getConsoleStateSize(void)
-{
- if (!inited)
- PM_init();
- return PM_getVGAStateSize() + FONT_C*2;
-}
-
-/****************************************************************************
-REMARKS:
-Save the state of the Linux console.
-****************************************************************************/
-void PMAPI PM_saveConsoleState(void *stateBuf,int console_id)
-{
- uchar *regs = stateBuf;
-
- /* Save the current console font */
- if (ioctl(console_id,GIO_FONT,&regs[PM_getVGAStateSize()]) < 0)
- perror("ioctl(GIO_FONT)");
-
- /* Inform the Linux console that we are going into graphics mode */
- if (ioctl(console_id, KDSETMODE, KD_GRAPHICS) < 0)
- perror("ioctl(KDSETMODE)");
-
- /* Save state of VGA registers */
- PM_saveVGAState(stateBuf);
-}
-
-void PMAPI PM_setSuspendAppCallback(int (_ASMAPIP saveState)(int flags))
-{
- /* TODO: Implement support for allowing console switching! */
-}
-
-/****************************************************************************
-REMARKS:
-Restore the state of the Linux console.
-****************************************************************************/
-void PMAPI PM_restoreConsoleState(const void *stateBuf,PM_HWND console_id)
-{
- const uchar *regs = stateBuf;
-
- /* Restore the state of the VGA compatible registers */
- PM_restoreVGAState(stateBuf);
-
- /* Inform the Linux console that we are back from graphics modes */
- if (ioctl(console_id, KDSETMODE, KD_TEXT) < 0)
- LOGWARN("ioctl(KDSETMODE) failed");
-
- /* Restore the old console font */
- if (ioctl(console_id,PIO_FONT,&regs[PM_getVGAStateSize()]) < 0)
- LOGWARN("ioctl(KDSETMODE) failed");
-
- /* Coming back from graphics mode on Linux also restored the previous
- * text mode console contents, so we need to clear the screen to get
- * around this since the cursor does not get homed by our code.
- */
- fflush(stdout);
- fflush(stderr);
- printf("\033[H\033[J");
- fflush(stdout);
-}
-
-/****************************************************************************
-REMARKS:
-Close the Linux console and put it back to normal.
-****************************************************************************/
-void PMAPI PM_closeConsole(PM_HWND _PM_console_fd)
-{
- /* Restore console to normal operation */
- if (--console_count == 0) {
- /* Re-activate the original virtual console */
- if (startup_vc > 0)
- ioctl(_PM_console_fd, VT_ACTIVATE, startup_vc);
-
- /* Close the console file descriptor */
- if (_PM_console_fd > 2)
- close(_PM_console_fd);
- _PM_console_fd = -1;
- }
-}
-
-void PM_setOSCursorLocation(int x,int y)
-{
- /* Nothing to do in here */
-}
-
-/****************************************************************************
-REMARKS:
-Set the screen width and height for the Linux console.
-****************************************************************************/
-void PM_setOSScreenWidth(int width,int height)
-{
- struct winsize ws;
- struct vt_sizes vs;
-
- /* Resize the software terminal */
- ws.ws_col = width;
- ws.ws_row = height;
- ioctl(_PM_console_fd, TIOCSWINSZ, &ws);
-
- /* And the hardware */
- vs.v_rows = height;
- vs.v_cols = width;
- vs.v_scrollsize = 0;
- ioctl(_PM_console_fd, VT_RESIZE, &vs);
-}
-
-ibool PMAPI PM_setRealTimeClockHandler(PM_intHandler ih, int frequency)
-{
- /* TODO: Implement this for Linux */
- return false;
-}
-
-void PMAPI PM_setRealTimeClockFrequency(int frequency)
-{
- /* TODO: Implement this for Linux */
-}
-
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
- /* TODO: Implement this for Linux */
-}
-
-char * PMAPI PM_getCurrentPath(
- char *path,
- int maxLen)
-{
- return getcwd(path,maxLen);
-}
-
-char PMAPI PM_getBootDrive(void)
-{ return '/'; }
-
-const char * PMAPI PM_getVBEAFPath(void)
-{ return PM_getNucleusConfigPath(); }
-
-const char * PMAPI PM_getNucleusPath(void)
-{
- char *env = getenv("NUCLEUS_PATH");
- return env ? env : "/usr/lib/nucleus";
-}
-
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
- static char path[256];
- strcpy(path,PM_getNucleusPath());
- PM_backslash(path);
- strcat(path,"config");
- return path;
-}
-
-const char * PMAPI PM_getUniqueID(void)
-{
- static char buf[128];
- gethostname(buf, 128);
- return buf;
-}
-
-const char * PMAPI PM_getMachineName(void)
-{
- static char buf[128];
- gethostname(buf, 128);
- return buf;
-}
-
-void * PMAPI PM_getBIOSPointer(void)
-{
- static uchar *zeroPtr = NULL;
- if (!zeroPtr)
- zeroPtr = PM_mapPhysicalAddr(0,0xFFFFF,true);
- return (void*)(zeroPtr + 0x400);
-}
-
-void * PMAPI PM_getA0000Pointer(void)
-{
- /* PM_init maps in the 0xA0000 framebuffer region 1:1 with our
- * address mapping, so we can return the address here.
- */
- if (!inited)
- PM_init();
- return (void*)(0xA0000);
-}
-
-void * PMAPI PM_mapPhysicalAddr(ulong base,ulong limit,ibool isCached)
-{
- uchar *p;
- ulong baseAddr,baseOfs;
-
- if (!inited)
- PM_init();
- if (base >= 0xA0000 && base < 0x100000)
- return (void*)base;
- if (!fd_mem && (fd_mem = open("/dev/mem", O_RDWR)) == -1)
- return NULL;
-
- /* Round the physical address to a 4Kb boundary and the limit to a
- * 4Kb-1 boundary before passing the values to mmap. If we round the
- * physical address, then we also add an extra offset into the address
- * that we return.
- */
- baseOfs = base & 4095;
- baseAddr = base & ~4095;
- limit = ((limit+baseOfs+1+4095) & ~4095)-1;
- if ((p = mmap(0, limit+1,
- PROT_READ | PROT_WRITE, MAP_SHARED,
- fd_mem, baseAddr)) == (void *)-1)
- return NULL;
- return (void*)(p+baseOfs);
-}
-
-void PMAPI PM_freePhysicalAddr(void *ptr,ulong limit)
-{
- if ((ulong)ptr >= 0x100000)
- munmap(ptr,limit+1);
-}
-
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{
- /* TODO: This function should find the physical address of a linear */
- /* address. */
- return 0xFFFFFFFFUL;
-}
-
-ibool PMAPI PM_getPhysicalAddrRange(void *p,ulong length,ulong *physAddress)
-{
- /* TODO: This function should find a range of physical addresses */
- /* for a linear address. */
- return false;
-}
-
-void PMAPI PM_sleep(ulong milliseconds)
-{
- /* TODO: Put the process to sleep for milliseconds */
-}
-
-int PMAPI PM_getCOMPort(int port)
-{
- /* TODO: Re-code this to determine real values using the Plug and Play */
- /* manager for the OS. */
- switch (port) {
- case 0: return 0x3F8;
- case 1: return 0x2F8;
- }
- return 0;
-}
-
-int PMAPI PM_getLPTPort(int port)
-{
- /* TODO: Re-code this to determine real values using the Plug and Play */
- /* manager for the OS. */
- switch (port) {
- case 0: return 0x3BC;
- case 1: return 0x378;
- case 2: return 0x278;
- }
- return 0;
-}
-
-void * PMAPI PM_mallocShared(long size)
-{
- return PM_malloc(size);
-}
-
-void PMAPI PM_freeShared(void *ptr)
-{
- PM_free(ptr);
-}
-
-void * PMAPI PM_mapToProcess(void *base,ulong limit)
-{ return (void*)base; }
-
-void * PMAPI PM_mapRealPointer(uint r_seg,uint r_off)
-{
- /* PM_init maps in the 0xA0000-0x100000 region 1:1 with our
- * address mapping, as well as all memory blocks in a 1:1 address
- * mapping so we can simply return the physical address in here.
- */
- if (!inited)
- PM_init();
- return (void*)MK_PHYS(r_seg,r_off);
-}
-
-void * PMAPI PM_allocRealSeg(uint size,uint *r_seg,uint *r_off)
-{
- int i;
- char *r = (char *)REAL_MEM_BASE;
-
- if (!inited)
- PM_init();
- if (!mem_info.ready)
- return NULL;
- if (mem_info.count == REAL_MEM_BLOCKS)
- return NULL;
- size = (size + 15) & ~15;
- for (i = 0; i < mem_info.count; i++) {
- if (mem_info.blocks[i].free && size < mem_info.blocks[i].size) {
- insert_block(i);
- mem_info.blocks[i].size = size;
- mem_info.blocks[i].free = 0;
- mem_info.blocks[i + 1].size -= size;
- *r_seg = (uint)(r) >> 4;
- *r_off = (uint)(r) & 0xF;
- return (void *)r;
- }
- r += mem_info.blocks[i].size;
- }
- return NULL;
-}
-
-void PMAPI PM_freeRealSeg(void *mem)
-{
- int i;
- char *r = (char *)REAL_MEM_BASE;
-
- if (!mem_info.ready)
- return;
- i = 0;
- while (mem != (void *)r) {
- r += mem_info.blocks[i].size;
- i++;
- if (i == mem_info.count)
- return;
- }
- mem_info.blocks[i].free = 1;
- if (i + 1 < mem_info.count && mem_info.blocks[i + 1].free) {
- mem_info.blocks[i].size += mem_info.blocks[i + 1].size;
- delete_block(i + 1);
- }
- if (i - 1 >= 0 && mem_info.blocks[i - 1].free) {
- mem_info.blocks[i - 1].size += mem_info.blocks[i].size;
- delete_block(i);
- }
-}
-
-#define DIRECTION_FLAG (1 << 10)
-
-static void em_ins(int size)
-{
- unsigned int edx, edi;
-
- edx = context.vm.regs.edx & 0xffff;
- edi = context.vm.regs.edi & 0xffff;
- edi += (unsigned int)context.vm.regs.ds << 4;
- if (context.vm.regs.eflags & DIRECTION_FLAG) {
- if (size == 4)
- asm volatile ("std; insl; cld"
- : "=D" (edi) : "d" (edx), "0" (edi));
- else if (size == 2)
- asm volatile ("std; insw; cld"
- : "=D" (edi) : "d" (edx), "0" (edi));
- else
- asm volatile ("std; insb; cld"
- : "=D" (edi) : "d" (edx), "0" (edi));
- }
- else {
- if (size == 4)
- asm volatile ("cld; insl"
- : "=D" (edi) : "d" (edx), "0" (edi));
- else if (size == 2)
- asm volatile ("cld; insw"
- : "=D" (edi) : "d" (edx), "0" (edi));
- else
- asm volatile ("cld; insb"
- : "=D" (edi) : "d" (edx), "0" (edi));
- }
- edi -= (unsigned int)context.vm.regs.ds << 4;
- context.vm.regs.edi &= 0xffff0000;
- context.vm.regs.edi |= edi & 0xffff;
-}
-
-static void em_rep_ins(int size)
-{
- unsigned int ecx, edx, edi;
-
- ecx = context.vm.regs.ecx & 0xffff;
- edx = context.vm.regs.edx & 0xffff;
- edi = context.vm.regs.edi & 0xffff;
- edi += (unsigned int)context.vm.regs.ds << 4;
- if (context.vm.regs.eflags & DIRECTION_FLAG) {
- if (size == 4)
- asm volatile ("std; rep; insl; cld"
- : "=D" (edi), "=c" (ecx)
- : "d" (edx), "0" (edi), "1" (ecx));
- else if (size == 2)
- asm volatile ("std; rep; insw; cld"
- : "=D" (edi), "=c" (ecx)
- : "d" (edx), "0" (edi), "1" (ecx));
- else
- asm volatile ("std; rep; insb; cld"
- : "=D" (edi), "=c" (ecx)
- : "d" (edx), "0" (edi), "1" (ecx));
- }
- else {
- if (size == 4)
- asm volatile ("cld; rep; insl"
- : "=D" (edi), "=c" (ecx)
- : "d" (edx), "0" (edi), "1" (ecx));
- else if (size == 2)
- asm volatile ("cld; rep; insw"
- : "=D" (edi), "=c" (ecx)
- : "d" (edx), "0" (edi), "1" (ecx));
- else
- asm volatile ("cld; rep; insb"
- : "=D" (edi), "=c" (ecx)
- : "d" (edx), "0" (edi), "1" (ecx));
- }
-
- edi -= (unsigned int)context.vm.regs.ds << 4;
- context.vm.regs.edi &= 0xffff0000;
- context.vm.regs.edi |= edi & 0xffff;
- context.vm.regs.ecx &= 0xffff0000;
- context.vm.regs.ecx |= ecx & 0xffff;
-}
-
-static void em_outs(int size)
-{
- unsigned int edx, esi;
-
- edx = context.vm.regs.edx & 0xffff;
- esi = context.vm.regs.esi & 0xffff;
- esi += (unsigned int)context.vm.regs.ds << 4;
- if (context.vm.regs.eflags & DIRECTION_FLAG) {
- if (size == 4)
- asm volatile ("std; outsl; cld"
- : "=S" (esi) : "d" (edx), "0" (esi));
- else if (size == 2)
- asm volatile ("std; outsw; cld"
- : "=S" (esi) : "d" (edx), "0" (esi));
- else
- asm volatile ("std; outsb; cld"
- : "=S" (esi) : "d" (edx), "0" (esi));
- }
- else {
- if (size == 4)
- asm volatile ("cld; outsl"
- : "=S" (esi) : "d" (edx), "0" (esi));
- else if (size == 2)
- asm volatile ("cld; outsw"
- : "=S" (esi) : "d" (edx), "0" (esi));
- else
- asm volatile ("cld; outsb"
- : "=S" (esi) : "d" (edx), "0" (esi));
- }
-
- esi -= (unsigned int)context.vm.regs.ds << 4;
- context.vm.regs.esi &= 0xffff0000;
- context.vm.regs.esi |= esi & 0xffff;
-}
-
-static void em_rep_outs(int size)
-{
- unsigned int ecx, edx, esi;
-
- ecx = context.vm.regs.ecx & 0xffff;
- edx = context.vm.regs.edx & 0xffff;
- esi = context.vm.regs.esi & 0xffff;
- esi += (unsigned int)context.vm.regs.ds << 4;
- if (context.vm.regs.eflags & DIRECTION_FLAG) {
- if (size == 4)
- asm volatile ("std; rep; outsl; cld"
- : "=S" (esi), "=c" (ecx)
- : "d" (edx), "0" (esi), "1" (ecx));
- else if (size == 2)
- asm volatile ("std; rep; outsw; cld"
- : "=S" (esi), "=c" (ecx)
- : "d" (edx), "0" (esi), "1" (ecx));
- else
- asm volatile ("std; rep; outsb; cld"
- : "=S" (esi), "=c" (ecx)
- : "d" (edx), "0" (esi), "1" (ecx));
- }
- else {
- if (size == 4)
- asm volatile ("cld; rep; outsl"
- : "=S" (esi), "=c" (ecx)
- : "d" (edx), "0" (esi), "1" (ecx));
- else if (size == 2)
- asm volatile ("cld; rep; outsw"
- : "=S" (esi), "=c" (ecx)
- : "d" (edx), "0" (esi), "1" (ecx));
- else
- asm volatile ("cld; rep; outsb"
- : "=S" (esi), "=c" (ecx)
- : "d" (edx), "0" (esi), "1" (ecx));
- }
-
- esi -= (unsigned int)context.vm.regs.ds << 4;
- context.vm.regs.esi &= 0xffff0000;
- context.vm.regs.esi |= esi & 0xffff;
- context.vm.regs.ecx &= 0xffff0000;
- context.vm.regs.ecx |= ecx & 0xffff;
-}
-
-static int emulate(void)
-{
- unsigned char *insn;
- struct {
- unsigned int size : 1;
- unsigned int rep : 1;
- } prefix = { 0, 0 };
- int i = 0;
-
- insn = (unsigned char *)((unsigned int)context.vm.regs.cs << 4);
- insn += context.vm.regs.eip;
-
- while (1) {
-#ifdef TRACE_IO
- traceAddr = ((ulong)context.vm.regs.cs << 16) + context.vm.regs.eip + i;
-#endif
- if (insn[i] == 0x66) {
- prefix.size = 1 - prefix.size;
- i++;
- }
- else if (insn[i] == 0xf3) {
- prefix.rep = 1;
- i++;
- }
- else if (insn[i] == 0xf0 || insn[i] == 0xf2
- || insn[i] == 0x26 || insn[i] == 0x2e
- || insn[i] == 0x36 || insn[i] == 0x3e
- || insn[i] == 0x64 || insn[i] == 0x65
- || insn[i] == 0x67) {
- /* these prefixes are just ignored */
- i++;
- }
- else if (insn[i] == 0x6c) {
- if (prefix.rep)
- em_rep_ins(1);
- else
- em_ins(1);
- i++;
- break;
- }
- else if (insn[i] == 0x6d) {
- if (prefix.rep) {
- if (prefix.size)
- em_rep_ins(4);
- else
- em_rep_ins(2);
- }
- else {
- if (prefix.size)
- em_ins(4);
- else
- em_ins(2);
- }
- i++;
- break;
- }
- else if (insn[i] == 0x6e) {
- if (prefix.rep)
- em_rep_outs(1);
- else
- em_outs(1);
- i++;
- break;
- }
- else if (insn[i] == 0x6f) {
- if (prefix.rep) {
- if (prefix.size)
- em_rep_outs(4);
- else
- em_rep_outs(2);
- }
- else {
- if (prefix.size)
- em_outs(4);
- else
- em_outs(2);
- }
- i++;
- break;
- }
- else if (insn[i] == 0xec) {
- *((uchar*)&context.vm.regs.eax) = port_in(context.vm.regs.edx);
- i++;
- break;
- }
- else if (insn[i] == 0xed) {
- if (prefix.size)
- *((ulong*)&context.vm.regs.eax) = port_inl(context.vm.regs.edx);
- else
- *((ushort*)&context.vm.regs.eax) = port_inw(context.vm.regs.edx);
- i++;
- break;
- }
- else if (insn[i] == 0xee) {
- port_out(context.vm.regs.eax,context.vm.regs.edx);
- i++;
- break;
- }
- else if (insn[i] == 0xef) {
- if (prefix.size)
- port_outl(context.vm.regs.eax,context.vm.regs.edx);
- else
- port_outw(context.vm.regs.eax,context.vm.regs.edx);
- i++;
- break;
- }
- else
- return 0;
- }
-
- context.vm.regs.eip += i;
- return 1;
-}
-
-static void debug_info(int vret)
-{
- int i;
- unsigned char *p;
-
- fputs("vm86() failed\n", stderr);
- fprintf(stderr, "return = 0x%x\n", vret);
- fprintf(stderr, "eax = 0x%08lx\n", context.vm.regs.eax);
- fprintf(stderr, "ebx = 0x%08lx\n", context.vm.regs.ebx);
- fprintf(stderr, "ecx = 0x%08lx\n", context.vm.regs.ecx);
- fprintf(stderr, "edx = 0x%08lx\n", context.vm.regs.edx);
- fprintf(stderr, "esi = 0x%08lx\n", context.vm.regs.esi);
- fprintf(stderr, "edi = 0x%08lx\n", context.vm.regs.edi);
- fprintf(stderr, "ebp = 0x%08lx\n", context.vm.regs.ebp);
- fprintf(stderr, "eip = 0x%08lx\n", context.vm.regs.eip);
- fprintf(stderr, "cs = 0x%04x\n", context.vm.regs.cs);
- fprintf(stderr, "esp = 0x%08lx\n", context.vm.regs.esp);
- fprintf(stderr, "ss = 0x%04x\n", context.vm.regs.ss);
- fprintf(stderr, "ds = 0x%04x\n", context.vm.regs.ds);
- fprintf(stderr, "es = 0x%04x\n", context.vm.regs.es);
- fprintf(stderr, "fs = 0x%04x\n", context.vm.regs.fs);
- fprintf(stderr, "gs = 0x%04x\n", context.vm.regs.gs);
- fprintf(stderr, "eflags = 0x%08lx\n", context.vm.regs.eflags);
- fputs("cs:ip = [ ", stderr);
- p = (unsigned char *)((context.vm.regs.cs << 4) + (context.vm.regs.eip & 0xffff));
- for (i = 0; i < 16; ++i)
- fprintf(stderr, "%02x ", (unsigned int)p[i]);
- fputs("]\n", stderr);
- fflush(stderr);
-}
-
-static int run_vm86(void)
-{
- unsigned int vret;
-
- for (;;) {
- vret = vm86(&context.vm);
- if (VM86_TYPE(vret) == VM86_INTx) {
- unsigned int v = VM86_ARG(vret);
- if (v == RETURN_TO_32_INT)
- return 1;
- pushw(context.vm.regs.eflags);
- pushw(context.vm.regs.cs);
- pushw(context.vm.regs.eip);
- context.vm.regs.cs = get_int_seg(v);
- context.vm.regs.eip = get_int_off(v);
- context.vm.regs.eflags &= ~(VIF_MASK | TF_MASK);
- continue;
- }
- if (VM86_TYPE(vret) != VM86_UNKNOWN)
- break;
- if (!emulate())
- break;
- }
- debug_info(vret);
- return 0;
-}
-
-#define IND(ereg) context.vm.regs.ereg = regs->ereg
-#define OUTD(ereg) regs->ereg = context.vm.regs.ereg
-
-void PMAPI DPMI_int86(int intno, DPMI_regs *regs)
-{
- if (!inited)
- PM_init();
- memset(&context.vm.regs, 0, sizeof(context.vm.regs));
- IND(eax); IND(ebx); IND(ecx); IND(edx); IND(esi); IND(edi);
- context.vm.regs.eflags = DEFAULT_VM86_FLAGS;
- context.vm.regs.cs = get_int_seg(intno);
- context.vm.regs.eip = get_int_off(intno);
- context.vm.regs.ss = context.stack_seg;
- context.vm.regs.esp = context.stack_off;
- pushw(DEFAULT_VM86_FLAGS);
- pushw(context.ret_seg);
- pushw(context.ret_off);
- run_vm86();
- OUTD(eax); OUTD(ebx); OUTD(ecx); OUTD(edx); OUTD(esi); OUTD(edi);
- regs->flags = context.vm.regs.eflags;
-}
-
-#define IN(ereg) context.vm.regs.ereg = in->e.ereg
-#define OUT(ereg) out->e.ereg = context.vm.regs.ereg
-
-int PMAPI PM_int86(int intno, RMREGS *in, RMREGS *out)
-{
- if (!inited)
- PM_init();
- memset(&context.vm.regs, 0, sizeof(context.vm.regs));
- IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
- context.vm.regs.eflags = DEFAULT_VM86_FLAGS;
- context.vm.regs.cs = get_int_seg(intno);
- context.vm.regs.eip = get_int_off(intno);
- context.vm.regs.ss = context.stack_seg;
- context.vm.regs.esp = context.stack_off;
- pushw(DEFAULT_VM86_FLAGS);
- pushw(context.ret_seg);
- pushw(context.ret_off);
- run_vm86();
- OUT(eax); OUT(ebx); OUT(ecx); OUT(edx); OUT(esi); OUT(edi);
- out->x.cflag = context.vm.regs.eflags & 1;
- return out->x.ax;
-}
-
-int PMAPI PM_int86x(int intno, RMREGS *in, RMREGS *out,
- RMSREGS *sregs)
-{
- if (!inited)
- PM_init();
- if (intno == 0x21) {
- time_t today = time(NULL);
- struct tm *t;
- t = localtime(&today);
- out->x.cx = t->tm_year + 1900;
- out->h.dh = t->tm_mon + 1;
- out->h.dl = t->tm_mday;
- }
- else {
- unsigned int seg, off;
- seg = get_int_seg(intno);
- off = get_int_off(intno);
- memset(&context.vm.regs, 0, sizeof(context.vm.regs));
- IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
- context.vm.regs.eflags = DEFAULT_VM86_FLAGS;
- context.vm.regs.cs = seg;
- context.vm.regs.eip = off;
- context.vm.regs.es = sregs->es;
- context.vm.regs.ds = sregs->ds;
- context.vm.regs.fs = sregs->fs;
- context.vm.regs.gs = sregs->gs;
- context.vm.regs.ss = context.stack_seg;
- context.vm.regs.esp = context.stack_off;
- pushw(DEFAULT_VM86_FLAGS);
- pushw(context.ret_seg);
- pushw(context.ret_off);
- run_vm86();
- OUT(eax); OUT(ebx); OUT(ecx); OUT(edx); OUT(esi); OUT(edi);
- sregs->es = context.vm.regs.es;
- sregs->ds = context.vm.regs.ds;
- sregs->fs = context.vm.regs.fs;
- sregs->gs = context.vm.regs.gs;
- out->x.cflag = context.vm.regs.eflags & 1;
- }
- return out->e.eax;
-}
-
-#define OUTR(ereg) in->e.ereg = context.vm.regs.ereg
-
-void PMAPI PM_callRealMode(uint seg,uint off, RMREGS *in,
- RMSREGS *sregs)
-{
- if (!inited)
- PM_init();
- memset(&context.vm.regs, 0, sizeof(context.vm.regs));
- IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
- context.vm.regs.eflags = DEFAULT_VM86_FLAGS;
- context.vm.regs.cs = seg;
- context.vm.regs.eip = off;
- context.vm.regs.ss = context.stack_seg;
- context.vm.regs.esp = context.stack_off;
- context.vm.regs.es = sregs->es;
- context.vm.regs.ds = sregs->ds;
- context.vm.regs.fs = sregs->fs;
- context.vm.regs.gs = sregs->gs;
- pushw(DEFAULT_VM86_FLAGS);
- pushw(context.ret_seg);
- pushw(context.ret_off);
- run_vm86();
- OUTR(eax); OUTR(ebx); OUTR(ecx); OUTR(edx); OUTR(esi); OUTR(edi);
- sregs->es = context.vm.regs.es;
- sregs->ds = context.vm.regs.ds;
- sregs->fs = context.vm.regs.fs;
- sregs->gs = context.vm.regs.gs;
- in->x.cflag = context.vm.regs.eflags & 1;
-}
-
-void PMAPI PM_availableMemory(ulong *physical,ulong *total)
-{
- FILE *mem = fopen("/proc/meminfo","r");
- char buf[1024];
-
- fgets(buf,1024,mem);
- fgets(buf,1024,mem);
- sscanf(buf,"Mem: %*d %*d %ld", physical);
- fgets(buf,1024,mem);
- sscanf(buf,"Swap: %*d %*d %ld", total);
- fclose(mem);
- *total += *physical;
-}
-
-void * PMAPI PM_allocLockedMem(uint size,ulong *physAddr,ibool contiguous,ibool below16M)
-{
- /* TODO: Implement this for Linux */
- return NULL;
-}
-
-void PMAPI PM_freeLockedMem(void *p,uint size,ibool contiguous)
-{
- /* TODO: Implement this for Linux */
-}
-
-void * PMAPI PM_allocPage(
- ibool locked)
-{
- /* TODO: Implement this for Linux */
- return NULL;
-}
-
-void PMAPI PM_freePage(
- void *p)
-{
- /* TODO: Implement this for Linux */
-}
-
-void PMAPI PM_setBankA(int bank)
-{
- if (!inited)
- PM_init();
- memset(&context.vm.regs, 0, sizeof(context.vm.regs));
- context.vm.regs.eax = 0x4F05;
- context.vm.regs.ebx = 0x0000;
- context.vm.regs.edx = bank;
- context.vm.regs.eflags = DEFAULT_VM86_FLAGS;
- context.vm.regs.cs = get_int_seg(0x10);
- context.vm.regs.eip = get_int_off(0x10);
- context.vm.regs.ss = context.stack_seg;
- context.vm.regs.esp = context.stack_off;
- pushw(DEFAULT_VM86_FLAGS);
- pushw(context.ret_seg);
- pushw(context.ret_off);
- run_vm86();
-}
-
-void PMAPI PM_setBankAB(int bank)
-{
- if (!inited)
- PM_init();
- memset(&context.vm.regs, 0, sizeof(context.vm.regs));
- context.vm.regs.eax = 0x4F05;
- context.vm.regs.ebx = 0x0000;
- context.vm.regs.edx = bank;
- context.vm.regs.eflags = DEFAULT_VM86_FLAGS;
- context.vm.regs.cs = get_int_seg(0x10);
- context.vm.regs.eip = get_int_off(0x10);
- context.vm.regs.ss = context.stack_seg;
- context.vm.regs.esp = context.stack_off;
- pushw(DEFAULT_VM86_FLAGS);
- pushw(context.ret_seg);
- pushw(context.ret_off);
- run_vm86();
- context.vm.regs.eax = 0x4F05;
- context.vm.regs.ebx = 0x0001;
- context.vm.regs.edx = bank;
- context.vm.regs.eflags = DEFAULT_VM86_FLAGS;
- context.vm.regs.cs = get_int_seg(0x10);
- context.vm.regs.eip = get_int_off(0x10);
- context.vm.regs.ss = context.stack_seg;
- context.vm.regs.esp = context.stack_off;
- pushw(DEFAULT_VM86_FLAGS);
- pushw(context.ret_seg);
- pushw(context.ret_off);
- run_vm86();
-}
-
-void PMAPI PM_setCRTStart(int x,int y,int waitVRT)
-{
- if (!inited)
- PM_init();
- memset(&context.vm.regs, 0, sizeof(context.vm.regs));
- context.vm.regs.eax = 0x4F07;
- context.vm.regs.ebx = waitVRT;
- context.vm.regs.ecx = x;
- context.vm.regs.edx = y;
- context.vm.regs.eflags = DEFAULT_VM86_FLAGS;
- context.vm.regs.cs = get_int_seg(0x10);
- context.vm.regs.eip = get_int_off(0x10);
- context.vm.regs.ss = context.stack_seg;
- context.vm.regs.esp = context.stack_off;
- pushw(DEFAULT_VM86_FLAGS);
- pushw(context.ret_seg);
- pushw(context.ret_off);
- run_vm86();
-}
-
-int PMAPI PM_enableWriteCombine(ulong base,ulong length,uint type)
-{
-#ifdef ENABLE_MTRR
- struct mtrr_sentry sentry;
-
- if (mtrr_fd < 0)
- return PM_MTRR_ERR_NO_OS_SUPPORT;
- sentry.base = base;
- sentry.size = length;
- sentry.type = type;
- if (ioctl(mtrr_fd, MTRRIOC_ADD_ENTRY, &sentry) == -1) {
- /* TODO: Need to decode MTRR error codes!! */
- return PM_MTRR_NOT_SUPPORTED;
- }
- return PM_MTRR_ERR_OK;
-#else
- return PM_MTRR_ERR_NO_OS_SUPPORT;
-#endif
-}
-
-/****************************************************************************
-PARAMETERS:
-callback - Function to callback with write combine information
-
-REMARKS:
-Function to enumerate all write combine regions currently enabled for the
-processor.
-****************************************************************************/
-int PMAPI PM_enumWriteCombine(
- PM_enumWriteCombine_t callback)
-{
-#ifdef ENABLE_MTRR
- struct mtrr_gentry gentry;
-
- if (mtrr_fd < 0)
- return PM_MTRR_ERR_NO_OS_SUPPORT;
-
- for (gentry.regnum = 0; ioctl (mtrr_fd, MTRRIOC_GET_ENTRY, &gentry) == 0;
- ++gentry.regnum) {
- if (gentry.size > 0) {
- /* WARNING: This code assumes that the types in pmapi.h match the ones */
- /* in the Linux kernel (mtrr.h) */
- callback(gentry.base, gentry.size, gentry.type);
- }
- }
-
- return PM_MTRR_ERR_OK;
-#else
- return PM_MTRR_ERR_NO_OS_SUPPORT;
-#endif
-}
-
-ibool PMAPI PM_doBIOSPOST(
- ushort axVal,
- ulong BIOSPhysAddr,
- void *copyOfBIOS,
- ulong BIOSLen)
-{
- char *bios_ptr = (char*)0xC0000;
- char *old_bios;
- ulong Current10, Current6D, *rvec = 0;
- RMREGS regs;
- RMSREGS sregs;
-
- /* The BIOS is mapped to 0xC0000 with a private memory mapping enabled
- * which means we have a copy on write scheme. Hence we simply copy
- * the secondary BIOS image over the top of the old one.
- */
- if (!inited)
- PM_init();
- if ((old_bios = PM_malloc(BIOSLen)) == NULL)
- return false;
- if (BIOSPhysAddr != 0xC0000) {
- memcpy(old_bios,bios_ptr,BIOSLen);
- memcpy(bios_ptr,copyOfBIOS,BIOSLen);
- }
-
- /* The interrupt vectors should already be mmap()'ed from 0-0x400 in PM_init */
- Current10 = rvec[0x10];
- Current6D = rvec[0x6D];
-
- /* POST the secondary BIOS */
- rvec[0x10] = rvec[0x42]; /* Restore int 10h to STD-BIOS */
- regs.x.ax = axVal;
- PM_callRealMode(0xC000,0x0003,&regs,&sregs);
-
- /* Restore interrupt vectors */
- rvec[0x10] = Current10;
- rvec[0x6D] = Current6D;
-
- /* Restore original BIOS image */
- if (BIOSPhysAddr != 0xC0000)
- memcpy(bios_ptr,old_bios,BIOSLen);
- PM_free(old_bios);
- return true;
-}
-
-int PMAPI PM_lockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
- p = p; len = len;
- return 1;
-}
-
-int PMAPI PM_unlockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
- p = p; len = len;
- return 1;
-}
-
-int PMAPI PM_lockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
- p = p; len = len;
- return 1;
-}
-
-int PMAPI PM_unlockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
- p = p; len = len;
- return 1;
-}
-
-PM_MODULE PMAPI PM_loadLibrary(
- const char *szDLLName)
-{
- /* TODO: Implement this to load shared libraries! */
- (void)szDLLName;
- return NULL;
-}
-
-void * PMAPI PM_getProcAddress(
- PM_MODULE hModule,
- const char *szProcName)
-{
- /* TODO: Implement this! */
- (void)hModule;
- (void)szProcName;
- return NULL;
-}
-
-void PMAPI PM_freeLibrary(
- PM_MODULE hModule)
-{
- /* TODO: Implement this! */
- (void)hModule;
-}
-
-int PMAPI PM_setIOPL(
- int level)
-{
- /* TODO: Move the IOPL switching into this function!! */
- return level;
-}
-
-void PMAPI PM_flushTLB(void)
-{
- /* Do nothing on Linux. */
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/linux/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/linux/vflat.c
deleted file mode 100644
index 579ef2c95c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/linux/vflat.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-ibool PMAPI VF_available(void)
-{
- return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
- baseAddr = baseAddr;
- bankSize = bankSize;
- codeLen = codeLen;
- bankFunc = bankFunc;
- return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/linux/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/linux/ztimer.c
deleted file mode 100644
index 1b9bae28a6..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/linux/ztimer.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Linux
-*
-* Description: Linux specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-#include <unistd.h>
-#include <sys/time.h>
-#include "pmapi.h"
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-void __ZTimerInit(void)
-{
-}
-
-/****************************************************************************
-REMARKS:
-Use the gettimeofday() function to get microsecond precision (probably less
-though)
-****************************************************************************/
-static inline ulong __ULZReadTime(void)
-{
- struct timeval t;
- gettimeofday(&t, NULL);
- return t.tv_sec*1000000 + t.tv_usec;
-}
-
-/****************************************************************************
-REMARKS:
-Start the Zen Timer counting.
-****************************************************************************/
-#define __LZTimerOn(tm) tm->start.low = __ULZReadTime()
-
-/****************************************************************************
-REMARKS:
-Compute the lap time since the timer was started.
-****************************************************************************/
-#define __LZTimerLap(tm) (__ULZReadTime() - tm->start.low)
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOff(tm) tm->end.low = __ULZReadTime()
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerCount(tm) (tm->end.low - tm->start.low)
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION 1
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{ return finish - start; }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/makefile b/board/MAI/bios_emulator/scitech/src/pm/makefile
deleted file mode 100644
index 265f0e36d0..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/makefile
+++ /dev/null
@@ -1,290 +0,0 @@
-#############################################################################
-#
-# Copyright (C) 1996 SciTech Software.
-# All rights reserved.
-#
-# Descripton: Generic makefile for the PM library. Builds the library
-# file and all test programs.
-#
-#############################################################################
-
-.IMPORT .IGNORE : DEBUG_AGP_DRIVER TEST_HARNESS DEBUG_SDDPMI
-
-#----------------------------------------------------------------------------
-# Add DOS extender dependant flags to command line
-#----------------------------------------------------------------------------
-
-CFLAGS += $(DX_CFLAGS)
-ASFLAGS += $(DX_ASFLAGS)
-NO_PMLIB := 1
-
-#----------------------------------------------------------------------------
-# Include definitions specific for the target system
-#----------------------------------------------------------------------------
-
-.IF $(USE_VXD)
-
-# Building for Win32 VxD (minimal PM library implementation)
-
-LIBNAME = pm
-OBJECTS = pm$O vflat$O ztimer$O cpuinfo$O mtrr$O fileio$O pcilib$O \
- agp$O malloc$O vgastate$O gavxd$O _pm$O _mtrr$O _cpuinfo$O \
- _int64$O _pcihelp$O
-DEPEND_SRC := vxd;common;codepage;tests
-.SOURCE: vxd common codepage tests
-
-.ELIF $(USE_NTDRV)
-
-# Building for NT device drivers (minimal PM library implementation)
-
-LIBNAME = pm
-OBJECTS = pm$O vflat$O ztimer$O cpuinfo$O mtrr$O mem$O irq$O int86$O \
- stdio$O stdlib$O pcilib$O agp$O malloc$O vgastate$O gantdrv$O \
- _pm$O _mtrr$O _cpuinfo$O _int64$O _pcihelp$O _irq$O
-DEPEND_SRC := ntdrv;common;codepage;tests
-.SOURCE: ntdrv common codepage tests
-
-.ELIF $(USE_WIN32)
-
-# Building for Win32
-
-CFLAGS += -DUSE_OS_JOYSTICK
-LIBNAME = pm
-OBJECTS = pm$O vflat$O event$O ddraw$O ztimer$O cpuinfo$O pcilib$O \
- agp$O malloc$O vgastate$O gawin32$O ntservc$O _joy$O _cpuinfo$O \
- _int64$O _pcihelp$O
-DEPEND_SRC := win32;common;codepage;tests
-.SOURCE: win32 common codepage tests
-
-.ELIF $(USE_OS232)
-
-# Building for OS/2
-
-.IF $(USE_OS2GUI)
-LIBNAME = pm_pm
-.ELSE
-LIBNAME = pm
-.ENDIF
-OBJECTS = pm$O vflat$O event$O ztimer$O cpuinfo$O mtrr$O pcilib$O \
- agp$O malloc$O vgastate$O gaos2$O _pmos2$O _joy$O _cpuinfo$O \
- _int64$O _pcihelp$O dossctl$O
-DEPEND_SRC := os2;common;codepage;tests
-.SOURCE: os2 common codepage tests
-
-.ELIF $(USE_QNX)
-
-# Building for QNX
-
-USE_BIOS := 1
-.IF $(USE_PHOTON)
-LIBNAME = pm_ph
-.ELIF $(USE_X11)
-LIBNAME = pm_x11
-.ELSE
-LIBNAME = pm
-.ENDIF
-OBJECTS = pm$O vflat$O event$O ztimer$O cpuinfo$O mtrr$O pcilib$O \
- agp$O malloc$O mtrrqnx$O unixio$O vgastate$O gaqnx$O _joy$O \
- _mtrrqnx$O _cpuinfo$O _int64$O _pcihelp$O
-DEPEND_SRC := qnx;common;codepage;tests
-.SOURCE: qnx common codepage tests
-
-# Indicate that this program uses Nucleus device drivers (so needs I/O access)
-USE_NUCLEUS := 1
-
-.ELIF $(USE_LINUX)
-
-# Building for Linux
-
-CFLAGS += -DENABLE_MTRR -DUSE_OS_JOYSTICK
-.IF $(USE_X11)
-LIBNAME = pm_x11
-.ELSE
-LIBNAME = pm
-.ENDIF
-OBJECTS = pm$O vflat$O event$O ztimer$O cpuinfo$O pcilib$O \
- agp$O malloc$O unixio$O vgastate$O galinux$O _cpuinfo$O \
- _int64$O _pcihelp$O
-DEPEND_SRC := linux;common;codepage;tests;x11
-.SOURCE: linux common codepage tests x11
-
-# Building a shared library
-.IF $(SOFILE)
-LIB := ld
-LIBFLAGS := -r -o
-CFLAGS += -fPIC
-.ENDIF
-
-.ELIF $(USE_BEOS)
-
-# Building for BeOS GUI
-
-LIBNAME = pm
-OBJECTS = pm$O vflat$O event$O ztimer$O cpuinfo$O pcilib$O \
- agp$O malloc$O vgastate$O gabeos$O _joy$O _cpuinfo$O \
- _int64$O _pcihelp$O
-DEPEND_SRC := beos;common;codepage;tests
-.SOURCE: beos common codepage tests
-
-.ELIF $(USE_SMX32)
-
-# Building for SMX
-
-LIBNAME = pm
-OBJECTS = pm$O pmsmx$O vflat$O event$O ztimer$O cpuinfo$O mtrr$O pcilib$O \
- agp$O malloc$O vgastate$O gasmx$O _pm$O _pmsmx$O _mtrr$O _event$O \
- _joy$O _cpuinfo$O _int64$O _pcihelp$O _lztimer$O
-DEPEND_SRC := smx;common;codepage;tests
-.SOURCE: smx common codepage tests
-
-.ELIF $(USE_RTTARGET)
-
-# Building for RTTarget-32
-
-LIBNAME = pm
-OBJECTS = pm$O vflat$O event$O ztimer$O cpuinfo$O mtrr$O pcilib$O \
- agp$O malloc$O vgastate$O gartt$O _mtrr$O _joy$O _cpuinfo$O \
- _int64$O _pcihelp$O
-DEPEND_SRC := rttarget;common;codepage;tests
-.SOURCE: rttarget common codepage tests
-
-.ELSE
-
-# Building for MSDOS
-
-LIBNAME = pm
-OBJECTS = pm$O pmdos$O vflat$O event$O ztimer$O cpuinfo$O mtrr$O \
- agp$O malloc$O pcilib$O vgastate$O gados$O \
- _pm$O _pmdos$O _mtrr$O _vflat$O _event$O _joy$O _pcihelp$O \
- _cpuinfo$O _int64$O _lztimer$O _dma$O
-DEPEND_SRC := dos;common;codepage;tests
-.SOURCE: dos common codepage tests
-
-.ENDIF
-
-# Object modules for keyboard code pages
-
-OBJECTS += us_eng$O
-
-# Common object modules
-
-OBJECTS += common$O
-.IF $(CHECKED)
-OBJECTS += debug$O
-.ENDIF
-
-# Nucleus loader library object modules. Note that when compiling a test harness
-# library we need to exclude the Nucleus loader library.
-
-.IF $(TEST_HARNESS)
-CFLAGS += -DTEST_HARNESS -DPMLIB
-LIBNAME = pm_test
-.ELSE
-OBJECTS += galib$O _ga_imp$O
-.ENDIF
-
-.IF $(DEBUG_SDDPMI)
-CFLAGS += -DDEBUG_SDDPMI
-.ENDIF
-
-# AGP library object modules
-
-.IF $(DEBUG_AGP_DRIVER)
-CFLAGS += -DDEBUG_AGP_DRIVER
-OBJECTS += agplib$O
-.ELSE
-OBJECTS += agplib$O peloader$O libcimp$O _gatimer$O
-.ENDIF
-
-#----------------------------------------------------------------------------
-# Name of library and generic object files required to build it
-#----------------------------------------------------------------------------
-
-.IF $(STKCALL)
-LIBFILE = s$(LP)$(LIBNAME)$L
-.ELSE
-LIBFILE = $(LP)$(LIBNAME)$L
-.ENDIF
-LIBCLEAN = *.lib *.a
-
-#----------------------------------------------------------------------------
-# Change destination for library file depending the extender being used. This
-# is only necessary for DOS extender since the file go into a subdirectory
-# in the normal library directory, one for each supported extender. Other
-# OS'es put the file into the regular library directory, since there is
-# only one per OS in this case.
-#----------------------------------------------------------------------------
-
-MK_PMODE = 1
-
-.IF $(TEST_HARNESS)
-LIB_DEST := $(LIB_BASE)
-.ELIF $(USE_TNT)
-LIB_DEST := $(LIB_BASE)\tnt
-.ELIF $(USE_DOS4GW)
-LIB_DEST := $(LIB_BASE)\dos4gw
-.ELIF $(USE_X32)
-LIB_DEST := $(LIB_BASE)\x32
-.ELIF $(USE_DPMI16)
-LIB_DEST := $(LIB_BASE)\dpmi16
-.ELIF $(USE_DPMI32)
-LIB_DEST := $(LIB_BASE)\dpmi32
-.ELIF $(USE_DOSX)
-LIB_DEST := $(LIB_BASE)\dosx
-.END
-
-#----------------------------------------------------------------------------
-# Names of all executable files built
-#----------------------------------------------------------------------------
-
-.IF $(USE_REALDOS)
-EXEFILES = memtest$E biosptr$E video$E isvesa$E callreal$E \
- mouse$E tick$E key$E key15$E brk$E altbrk$E \
- critical$E altcrit$E vftest$E rtc$E getch$E \
- cpu$E timerc$E timercpp$E showpci$E uswc$E block$E
-.ELSE
-EXEFILES = memtest$E video$E isvesa$E callreal$E vftest$E getch$E \
- cpu$E timerc$E timercpp$E showpci$E uswc$E block$E \
- save$E restore$E
-.ENDIF
-
-all: $(EXEFILES)
-
-$(EXEFILES): $(LIBFILE)
-
-memtest$E: memtest$O
-biosptr$E: biosptr$O
-video$E: video$O
-isvesa$E: isvesa$O
-mouse$E: mouse$O
-tick$E: tick$O
-key$E: key$O
-key15$E: key15$O
-brk$E: brk$O
-altbrk$E: altbrk$O
-critical$E: critical$O
-altcrit$E: altcrit$O
-callreal$E: callreal$O
-vftest$E: vftest$O
-rtc$E: rtc$O
-getch$E: getch$O
-cpu$E: cpu$O
-timerc$E: timerc$O
-timercpp$E: timercpp$O
-showpci$E: showpci$O
-uswc$E: uswc$O
-block$E: block$O
-save$E: save$O
-restore$E: restore$O
-test$E: test$O _test$O
-
-#----------------------------------------------------------------------------
-# Define the list of object files to create dependency information for
-#----------------------------------------------------------------------------
-
-DEPEND_OBJ := $(OBJECTS) memtest$O biosptr$O video$O isvesa$O mouse$O \
- tick$O key$O key$O brk$O altbrk$O critical$O altcrit$O \
- callreal$O vftest$O getch$O timercpp$O
-
-.INCLUDE: "$(SCITECH)/makedefs/common.mk"
-
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/_irq.asm b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/_irq.asm
deleted file mode 100644
index 11824a0afc..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/_irq.asm
+++ /dev/null
@@ -1,288 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Language: 80386 Assembler, TASM 4.0 or NASM
-;* Environment: 32-bit Windows NT device driver
-;*
-;* Description: Low level assembly support for the PM library specific to
-;* Windows NT device drivers.
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac" ; Memory model macros
-
-header _irq ; Set up memory model
-
-begdataseg _irq
-
- cextern _PM_rtcHandler,CPTR
- cextern _PM_prevRTC,FCPTR
-
-RtcInside dw 0 ; Are we still handling current interrupt
-sidtBuf df 0 ; Buffer for sidt instruction
-
-enddataseg _irq
-
-begcodeseg _irq ; Start of code segment
-
-cpublic _PM_irqCodeStart
-
-; Macro to delay briefly to ensure that enough time has elapsed between
-; successive I/O accesses so that the device being accessed can respond
-; to both accesses even on a very fast PC.
-
-ifdef USE_NASM
-%macro DELAY 0
- jmp short $+2
- jmp short $+2
- jmp short $+2
-%endmacro
-%macro IODELAYN 1
-%rep %1
- DELAY
-%endrep
-%endmacro
-else
-macro DELAY
- jmp short $+2
- jmp short $+2
- jmp short $+2
-endm
-macro IODELAYN N
- rept N
- DELAY
- endm
-endm
-endif
-
-;----------------------------------------------------------------------------
-; PM_rtcISR - Real time clock interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the timer interrupt, to dispatch control
-; to high level C based subroutines. We save the state of all registers
-; in this routine, and switch to a local stack. Interrupts are *off*
-; when we call the user code.
-;
-; NOTE: This routine switches to a local stack before calling any C code,
-; and hence is _not_ re-entrant. Make sure your C code executes as
-; quickly as possible, since a timer overrun will simply hang the
-; system.
-;----------------------------------------------------------------------------
-cprocfar _PM_rtcISR
-
-;++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-; If we enable interrupts and call into any C based interrupt handling code,
-; we need to setup a bunch of important information for the NT kernel. The
-; code below takes care of this housekeeping for us (see Undocumented NT for
-; details). If we don't do this housekeeping and interrupts are enabled,
-; the kernel will become very unstable and crash within 10 seconds or so.
-;++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-
- pushad
- pushfd
- push fs
-
- mov ebx,00000030h
- mov fs,bx
- sub esp,50h
- mov ebp,esp
-
-; Setup the exception frame to NULL
-
- mov ebx,[DWORD cs:0FFDFF000h]
- mov [DWORD ds:0FFDFF000h], 0FFFFFFFFh
- mov [DWORD ebp],ebx
-
-; Save away the existing KSS ebp
-
- mov esi,[DWORD cs:0FFDFF124h]
- mov ebx,[DWORD esi+00000128h]
- mov [DWORD ebp+4h],ebx
- mov [DWORD esi+00000128h],ebp
-
-; Save away the kernel time and the thread mode (kernel/user)
-
- mov edi,[DWORD esi+00000137h]
- mov [DWORD ebp+8h],edi
-
-; Set the thread mode (kernel/user) based on the code selector
-
- mov ebx,[DWORD ebp+7Ch]
- and ebx,01
- mov [BYTE esi+00000137h],bl
-
-;++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-; End of special interrupt Prolog code
-;++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-
-; Clear priority interrupt controller and re-enable interrupts so we
-; dont lock things up for long.
-
- mov al,20h
- out 0A0h,al
- out 020h,al
-
-; Clear real-time clock timeout
-
- in al,70h ; Read CMOS index register
- push eax ; and save for later
- IODELAYN 3
- mov al,0Ch
- out 70h,al
- IODELAYN 5
- in al,71h
-
-; Call the C interrupt handler function
-
- cmp [BYTE RtcInside],1 ; Check for mutual exclusion
- je @@Exit
- mov [BYTE RtcInside],1
- sti ; Enable interrupts
- cld ; Clear direction flag for C code
- call [CPTR _PM_rtcHandler]
- cli ; Disable interrupts on exit!
- mov [BYTE RtcInside],0
-
-@@Exit: pop eax
- out 70h,al ; Restore CMOS index register
-
-;++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-; Start of special epilog code to restore stuff on exit from handler
-;++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-
-; Restore the KSS ebp
-
- mov esi,[DWORD cs:0FFDFF124h]
- mov ebx,[DWORD ebp+4]
- mov [DWORD esi+00000128h],ebx
-
-; Restore the exception frame
-
- mov ebx,[DWORD ebp]
- mov [DWORD fs:00000000],ebx
-
-; Restore the thread mode
-
- mov ebx,[DWORD ebp+8h]
- mov esi,[DWORD fs:00000124h]
- mov [BYTE esi+00000137h],bl
- add esp, 50h
- pop fs
- popfd
- popad
-
-; Return from interrupt
-
- iret
-
-cprocend
-
-cpublic _PM_irqCodeEnd
-
-;----------------------------------------------------------------------------
-; void _PM_getISR(int irq,PMFARPTR *handler);
-;----------------------------------------------------------------------------
-; Function to return the specific IRQ handler direct from the IDT.
-;----------------------------------------------------------------------------
-cprocstart _PM_getISR
-
- ARG idtEntry:UINT, handler:DPTR
-
- enter_c 0
- mov ecx,[handler] ; Get address of handler to fill in
- sidt [sidtBuf] ; Get IDTR register into sidtBuf
- mov eax,[DWORD sidtBuf+2] ; Get address of IDT into EAX
- mov ebx,[idtEntry]
- lea eax,[eax+ebx*8] ; Get entry in the IDT
- movzx edx,[WORD eax+6] ; Get high order 16-bits
- shl edx,16 ; Move into top 16-bits of address
- mov dx,[WORD eax] ; Get low order 16-bits
- mov [DWORD ecx],edx ; Store linear address of handler
- mov dx,[WORD eax+2] ; Get selector value
- mov [WORD ecx+4],dx ; Store selector value
- leave_c
- ret
-
-cprocend _PM_getISR
-
-;----------------------------------------------------------------------------
-; void _PM_setISR(int irq,void *handler);
-;----------------------------------------------------------------------------
-; Function to set the specific IRQ handler direct in the IDT.
-;----------------------------------------------------------------------------
-cprocstart _PM_setISR
-
- ARG irq:UINT, handler:CPTR
-
- enter_c 0
- mov ecx,[handler] ; Get address of new handler
- mov dx,cs ; Get selector for new handler
- sidt [sidtBuf] ; Get IDTR register into sidtBuf
- mov eax,[DWORD sidtBuf+2] ; Get address of IDT into EAX
- mov ebx,[idtEntry]
- lea eax,[eax+ebx*8] ; Get entry in the IDT
- cli
- mov [WORD eax+2],dx ; Store code segment selector
- mov [WORD eax],cx ; Store low order bits of handler
- shr ecx,16
- mov [WORD eax+6],cx ; Store high order bits of handler
- sti
- leave_c
- ret
-
-cprocend _PM_setISR
-
-;----------------------------------------------------------------------------
-; void _PM_restoreISR(int irq,PMFARPTR *handler);
-;----------------------------------------------------------------------------
-; Function to set the specific IRQ handler direct in the IDT.
-;----------------------------------------------------------------------------
-cprocstart _PM_restoreISR
-
- ARG irq:UINT, handler:CPTR
-
- enter_c 0
- mov ecx,[handler]
- mov dx,[WORD ecx+4] ; Get selector for old handler
- mov ecx,[DWORD ecx] ; Get address of old handler
- sidt [sidtBuf] ; Get IDTR register into sidtBuf
- mov eax,[DWORD sidtBuf+2] ; Get address of IDT into EAX
- mov ebx,[idtEntry]
- lea eax,[eax+ebx*8] ; Get entry in the IDT
- cli
- mov [WORD eax+2],dx ; Store code segment selector
- mov [WORD eax],cx ; Store low order bits of handler
- shr ecx,16
- mov [WORD eax+6],cx ; Store high order bits of handler
- sti
- leave_c
- ret
-
-cprocend _PM_restoreISR
-
-endcodeseg _irq
-
- END ; End of module
-
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/_pm.asm b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/_pm.asm
deleted file mode 100644
index 6cb276d25e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/_pm.asm
+++ /dev/null
@@ -1,281 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Language: 80386 Assembler, TASM 4.0 or NASM
-;* Environment: 32-bit Windows NT device driver
-;*
-;* Description: Low level assembly support for the PM library specific to
-;* Windows NT device drivers.
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac" ; Memory model macros
-
-header _pm ; Set up memory model
-
-P586
-
-begdataseg
-
-; Watcom C++ externals required to link when compiling floating point
-; C code. They are not actually used in the code because we compile with
-; inline floating point instructions, however the compiler still generates
-; the references in the object modules.
-
-__8087 dd 0
- PUBLIC __8087
-__imthread:
-__fltused:
-_fltused_ dd 0
- PUBLIC __imthread
- PUBLIC _fltused_
- PUBLIC __fltused
-
-enddataseg
-
-begcodeseg _pm ; Start of code segment
-
-;----------------------------------------------------------------------------
-; void PM_segread(PMSREGS *sregs)
-;----------------------------------------------------------------------------
-; Read the current value of all segment registers
-;----------------------------------------------------------------------------
-cprocstart PM_segread
-
- ARG sregs:DPTR
-
- enter_c
-
- mov ax,es
- _les _si,[sregs]
- mov [_ES _si],ax
- mov [_ES _si+2],cs
- mov [_ES _si+4],ss
- mov [_ES _si+6],ds
- mov [_ES _si+8],fs
- mov [_ES _si+10],gs
-
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_int386x(int intno, PMREGS *in, PMREGS *out,PMSREGS *sregs)
-;----------------------------------------------------------------------------
-; Issues a software interrupt in protected mode. This routine has been
-; written to allow user programs to load CS and DS with different values
-; other than the default.
-;----------------------------------------------------------------------------
-cprocstart PM_int386x
-
-; Not used for NT device drivers
-
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setBankA(int bank)
-;----------------------------------------------------------------------------
-cprocstart PM_setBankA
-
-; Not used for NT device drivers
-
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setBankAB(int bank)
-;----------------------------------------------------------------------------
-cprocstart PM_setBankAB
-
-; Not used for NT device drivers
-
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setCRTStart(int x,int y,int waitVRT)
-;----------------------------------------------------------------------------
-cprocstart PM_setCRTStart
-
-; Not used for NT device drivers
-
- ret
-
-cprocend
-
-; Macro to delay briefly to ensure that enough time has elapsed between
-; successive I/O accesses so that the device being accessed can respond
-; to both accesses even on a very fast PC.
-
-ifdef USE_NASM
-%macro DELAY 0
- jmp short $+2
- jmp short $+2
- jmp short $+2
-%endmacro
-%macro IODELAYN 1
-%rep %1
- DELAY
-%endrep
-%endmacro
-else
-macro DELAY
- jmp short $+2
- jmp short $+2
- jmp short $+2
-endm
-macro IODELAYN N
- rept N
- DELAY
- endm
-endm
-endif
-
-;----------------------------------------------------------------------------
-; uchar _PM_readCMOS(int index)
-;----------------------------------------------------------------------------
-; Read the value of a specific CMOS register. We do this with both
-; normal interrupts and NMI disabled.
-;----------------------------------------------------------------------------
-cprocstart _PM_readCMOS
-
- ARG index:UINT
-
- push _bp
- mov _bp,_sp
- pushfd
- mov al,[BYTE index]
- or al,80h ; Add disable NMI flag
- cli
- out 70h,al
- IODELAYN 5
- in al,71h
- mov ah,al
- xor al,al
- IODELAYN 5
- out 70h,al ; Re-enable NMI
- mov al,ah ; Return value in AL
- popfd
- pop _bp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _PM_writeCMOS(int index,uchar value)
-;----------------------------------------------------------------------------
-; Read the value of a specific CMOS register. We do this with both
-; normal interrupts and NMI disabled.
-;----------------------------------------------------------------------------
-cprocstart _PM_writeCMOS
-
- ARG index:UINT, value:UCHAR
-
- push _bp
- mov _bp,_sp
- pushfd
- mov al,[BYTE index]
- or al,80h ; Add disable NMI flag
- cli
- out 70h,al
- IODELAYN 5
- mov al,[value]
- out 71h,al
- xor al,al
- IODELAYN 5
- out 70h,al ; Re-enable NMI
- popfd
- pop _bp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; double _ftol(double f)
-;----------------------------------------------------------------------------
-; Calls to __ftol are generated by the Borland C++ compiler for code
-; that needs to convert a floating point type to an integral type.
-;
-; Input: floating point number on the top of the '87.
-;
-; Output: a (signed or unsigned) long in EAX
-; All other registers preserved.
-;-----------------------------------------------------------------------
-cprocstart _ftol
-
- LOCAL temp1:WORD, temp2:QWORD = LocalSize
-
- push ebp
- mov ebp,esp
- sub esp,LocalSize
-
- fstcw [temp1] ; save the control word
- fwait
- mov al,[BYTE temp1+1]
- or [BYTE temp1+1],0Ch ; set rounding control to chop
- fldcw [temp1]
- fistp [temp2] ; convert to 64-bit integer
- mov [BYTE temp1+1],al
- fldcw [temp1] ; restore the control word
- mov eax,[DWORD temp2] ; return LS 32 bits
- mov edx,[DWORD temp2+4] ; MS 32 bits
-
- mov esp,ebp
- pop ebp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; _PM_getPDB - Return the Page Table Directory Base address
-;----------------------------------------------------------------------------
-cprocstart _PM_getPDB
-
- mov eax,cr3
- and eax,0FFFFF000h
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; Flush the Translation Lookaside buffer
-;----------------------------------------------------------------------------
-cprocstart PM_flushTLB
-
- wbinvd ; Flush the CPU cache
- mov eax,cr3
- mov cr3,eax ; Flush the TLB
- ret
-
-cprocend
-
-endcodeseg _pm
-
- END ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/cpuinfo.c
deleted file mode 100644
index d15b07c290..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/cpuinfo.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit Windows VxD
-*
-* Description: VxD specific code for the CPU detection module.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Do nothing for VxD's
-****************************************************************************/
-#define SetMaxThreadPriority() 0
-
-/****************************************************************************
-REMARKS:
-Do nothing for VxD's
-****************************************************************************/
-#define RestoreThreadPriority(i) (void)(i)
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
- CPU_largeInteger *freq)
-{
- KeQueryPerformanceCounter((LARGE_INTEGER*)freq);
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-****************************************************************************/
-#define GetCounter(t) \
-{ \
- LARGE_INTEGER lt = KeQueryPerformanceCounter(NULL); \
- (t)->low = lt.LowPart; \
- (t)->high = lt.HighPart; \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/int86.c b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/int86.c
deleted file mode 100644
index c82648b787..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/int86.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit Windows NT device drivers.
-*
-* Description: Implementation for the real mode software interrupt
-* handling functions.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "sdd/sddhelp.h"
-#include "mtrr.h"
-#include "oshdr.h"
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-We do have limited BIOS access under Windows NT device drivers.
-****************************************************************************/
-ibool PMAPI PM_haveBIOSAccess(void)
-{
- /* Return false unless we have full buffer passing! */
- return false;
-}
-
-/****************************************************************************
-PARAMETERS:
-len - Place to store the length of the buffer
-rseg - Place to store the real mode segment of the buffer
-roff - Place to store the real mode offset of the buffer
-
-REMARKS:
-This function returns the address and length of the global VESA transfer
-buffer that is used for communicating with the VESA BIOS functions from
-Win16 and Win32 programs under Windows.
-****************************************************************************/
-void * PMAPI PM_getVESABuf(
- uint *len,
- uint *rseg,
- uint *roff)
-{
- /* No buffers supported under Windows NT (Windows XP has them however if */
- /* we ever decide to support this!) */
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Issue a protected mode software interrupt.
-****************************************************************************/
-int PMAPI PM_int386(
- int intno,
- PMREGS *in,
- PMREGS *out)
-{
- PMSREGS sregs;
- PM_segread(&sregs);
- return PM_int386x(intno,in,out,&sregs);
-}
-
-/****************************************************************************
-REMARKS:
-Map a real mode pointer to a protected mode pointer.
-****************************************************************************/
-void * PMAPI PM_mapRealPointer(
- uint r_seg,
- uint r_off)
-{
- /* Not used for Windows NT drivers! */
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of real mode memory
-****************************************************************************/
-void * PMAPI PM_allocRealSeg(
- uint size,
- uint *r_seg,
- uint *r_off)
-{
- /* Not supported in NT drivers */
- (void)size;
- (void)r_seg;
- (void)r_off;
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of real mode memory.
-****************************************************************************/
-void PMAPI PM_freeRealSeg(
- void *mem)
-{
- /* Not supported in NT drivers */
- (void)mem;
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt (parameters in DPMI compatible structure)
-****************************************************************************/
-void PMAPI DPMI_int86(
- int intno,
- DPMI_regs *regs)
-{
- /* Not used in NT drivers */
-}
-
-/****************************************************************************
-REMARKS:
-Call a V86 real mode function with the specified register values
-loaded before the call. The call returns with a far ret.
-****************************************************************************/
-void PMAPI PM_callRealMode(
- uint seg,
- uint off,
- RMREGS *regs,
- RMSREGS *sregs)
-{
- /* TODO!! */
-#if 0
- CLIENT_STRUCT saveRegs;
-
- /* Bail if we do not have BIOS access (ie: the VxD was dynamically
- * loaded, and not statically loaded.
- */
- if (!_PM_haveBIOS)
- return;
-
- TRACE("SDDHELP: Entering PM_callRealMode()\n");
- Begin_Nest_V86_Exec();
- LoadV86Registers(&saveRegs,regs,sregs);
- Simulate_Far_Call(seg, off);
- Resume_Exec();
- ReadV86Registers(&saveRegs,regs,sregs);
- End_Nest_Exec();
- TRACE("SDDHELP: Exiting PM_callRealMode()\n");
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Issue a V86 real mode interrupt with the specified register values
-loaded before the interrupt.
-****************************************************************************/
-int PMAPI PM_int86(
- int intno,
- RMREGS *in,
- RMREGS *out)
-{
- /* TODO!! */
-#if 0
- RMSREGS sregs = {0};
- CLIENT_STRUCT saveRegs;
- ushort oldDisable;
-
- /* Disable pass-up to our VxD handler so we directly call BIOS */
- TRACE("SDDHELP: Entering PM_int86()\n");
- if (disableTSRFlag) {
- oldDisable = *disableTSRFlag;
- *disableTSRFlag = 0;
- }
- Begin_Nest_V86_Exec();
- LoadV86Registers(&saveRegs,in,&sregs);
- Exec_Int(intno);
- ReadV86Registers(&saveRegs,out,&sregs);
- End_Nest_Exec();
-
- /* Re-enable pass-up to our VxD handler if previously enabled */
- if (disableTSRFlag)
- *disableTSRFlag = oldDisable;
-
- TRACE("SDDHELP: Exiting PM_int86()\n");
-#else
- *out = *in;
-#endif
- return out->x.ax;
-}
-
-/****************************************************************************
-REMARKS:
-Issue a V86 real mode interrupt with the specified register values
-loaded before the interrupt.
-****************************************************************************/
-int PMAPI PM_int86x(
- int intno,
- RMREGS *in,
- RMREGS *out,
- RMSREGS *sregs)
-{
- /* TODO!! */
-#if 0
- CLIENT_STRUCT saveRegs;
- ushort oldDisable;
-
- /* Bail if we do not have BIOS access (ie: the VxD was dynamically
- * loaded, and not statically loaded.
- */
- if (!_PM_haveBIOS) {
- *out = *in;
- return out->x.ax;
- }
-
- /* Disable pass-up to our VxD handler so we directly call BIOS */
- TRACE("SDDHELP: Entering PM_int86x()\n");
- if (disableTSRFlag) {
- oldDisable = *disableTSRFlag;
- *disableTSRFlag = 0;
- }
- Begin_Nest_V86_Exec();
- LoadV86Registers(&saveRegs,in,sregs);
- Exec_Int(intno);
- ReadV86Registers(&saveRegs,out,sregs);
- End_Nest_Exec();
-
- /* Re-enable pass-up to our VxD handler if previously enabled */
- if (disableTSRFlag)
- *disableTSRFlag = oldDisable;
-
- TRACE("SDDHELP: Exiting PM_int86x()\n");
-#else
- *out = *in;
-#endif
- return out->x.ax;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/irq.c b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/irq.c
deleted file mode 100644
index 9cd52047b7..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/irq.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit Windows NT device drivers.
-*
-* Description: Implementation for the NT driver IRQ management functions
-* for the PM library.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "pmint.h"
-#include "drvlib/os/os.h"
-#include "sdd/sddhelp.h"
-#include "mtrr.h"
-#include "oshdr.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-static int globalDataStart;
-static uchar _PM_oldCMOSRegA;
-static uchar _PM_oldCMOSRegB;
-static uchar _PM_oldRTCPIC2;
-static ulong RTC_idtEntry;
-PM_intHandler _PM_rtcHandler = NULL;
-PMFARPTR _VARAPI _PM_prevRTC = PMNULL;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* Functions to read and write CMOS registers */
-
-uchar _ASMAPI _PM_readCMOS(int index);
-void _ASMAPI _PM_writeCMOS(int index,uchar value);
-void _ASMAPI _PM_rtcISR(void);
-void _ASMAPI _PM_getISR(int irq,PMFARPTR *handler);
-void _ASMAPI _PM_setISR(int irq,void *handler);
-void _ASMAPI _PM_restoreISR(int irq,PMFARPTR *handler);
-void _ASMAPI _PM_irqCodeStart(void);
-void _ASMAPI _PM_irqCodeEnd(void);
-
-/****************************************************************************
-REMARKS:
-Set the real time clock frequency (for stereo modes).
-****************************************************************************/
-void PMAPI PM_setRealTimeClockFrequency(
- int frequency)
-{
- static short convert[] = {
- 8192,
- 4096,
- 2048,
- 1024,
- 512,
- 256,
- 128,
- 64,
- 32,
- 16,
- 8,
- 4,
- 2,
- -1,
- };
- int i;
-
- /* First clear any pending RTC timeout if not cleared */
- _PM_readCMOS(0x0C);
- if (frequency == 0) {
- /* Disable RTC timout */
- _PM_writeCMOS(0x0A,(uchar)_PM_oldCMOSRegA);
- _PM_writeCMOS(0x0B,(uchar)(_PM_oldCMOSRegB & 0x0F));
- }
- else {
- /* Convert frequency value to RTC clock indexes */
- for (i = 0; convert[i] != -1; i++) {
- if (convert[i] == frequency)
- break;
- }
-
- /* Set RTC timout value and enable timeout */
- _PM_writeCMOS(0x0A,(uchar)(0x20 | (i+3)));
- _PM_writeCMOS(0x0B,(uchar)((_PM_oldCMOSRegB & 0x0F) | 0x40));
- }
-}
-
-ibool PMAPI PM_setRealTimeClockHandler(PM_intHandler th,int frequency)
-{
- static ibool locked = false;
-
- /* Save the old CMOS real time clock values */
- _PM_oldCMOSRegA = _PM_readCMOS(0x0A);
- _PM_oldCMOSRegB = _PM_readCMOS(0x0B);
-
- /* Install the interrupt handler */
- RTC_idtEntry = 0x38;
- _PM_getISR(RTC_idtEntry, &_PM_prevRTC);
- _PM_rtcHandler = th;
- _PM_setISR(RTC_idtEntry, _PM_rtcISR);
-
- /* Program the real time clock default frequency */
- PM_setRealTimeClockFrequency(frequency);
-
- /* Unmask IRQ8 in the PIC2 */
- _PM_oldRTCPIC2 = PM_inpb(0xA1);
- PM_outpb(0xA1,(uchar)(_PM_oldRTCPIC2 & 0xFE));
- return true;
-}
-
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
- if (_PM_rtcHandler) {
- /* Restore CMOS registers and mask RTC clock */
- _PM_writeCMOS(0x0A,_PM_oldCMOSRegA);
- _PM_writeCMOS(0x0B,_PM_oldCMOSRegB);
- PM_outpb(0xA1,(uchar)((PM_inpb(0xA1) & 0xFE) | (_PM_oldRTCPIC2 & ~0xFE)));
-
- /* Restore the interrupt vector */
- _PM_restoreISR(RTC_idtEntry, &_PM_prevRTC);
- _PM_rtcHandler = NULL;
- }
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/mem.c b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/mem.c
deleted file mode 100644
index 3128c6ae38..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/mem.c
+++ /dev/null
@@ -1,518 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit Windows NT device drivers.
-*
-* Description: Implementation for the NT driver memory management functions
-* for the PM library.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "sdd/sddhelp.h"
-#include "mtrr.h"
-#include "oshdr.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-#define MAX_MEMORY_SHARED 100
-#define MAX_MEMORY_MAPPINGS 100
-#define MAX_MEMORY_LOCKED 100
-
-typedef struct {
- void *linear;
- ulong length;
- PMDL pMdl;
- } memshared;
-
-typedef struct {
- void *linear;
- void *mmIoMapped;
- ulong length;
- PMDL pMdl;
- } memlocked;
-
-typedef struct {
- ulong physical;
- ulong linear;
- ulong length;
- ibool isCached;
- } mmapping;
-
-static int numMappings = 0;
-static memshared shared[MAX_MEMORY_MAPPINGS] = {0};
-static mmapping maps[MAX_MEMORY_MAPPINGS];
-static memlocked locked[MAX_MEMORY_LOCKED];
-
-/*----------------------------- Implementation ----------------------------*/
-
-ulong PMAPI _PM_getPDB(void);
-
-/* Page table entry flags */
-
-#define PAGE_FLAGS_PRESENT 0x00000001
-#define PAGE_FLAGS_WRITEABLE 0x00000002
-#define PAGE_FLAGS_USER 0x00000004
-#define PAGE_FLAGS_WRITE_THROUGH 0x00000008
-#define PAGE_FLAGS_CACHE_DISABLE 0x00000010
-#define PAGE_FLAGS_ACCESSED 0x00000020
-#define PAGE_FLAGS_DIRTY 0x00000040
-#define PAGE_FLAGS_4MB 0x00000080
-
-/****************************************************************************
-PARAMETERS:
-base - Physical base address of the memory to maps in
-limit - Limit of physical memory to region to maps in
-
-RETURNS:
-Linear address of the newly mapped memory.
-
-REMARKS:
-Maps a physical memory range to a linear memory range.
-****************************************************************************/
-static ulong _PM_mapPhysicalToLinear(
- ulong base,
- ulong limit,
- ibool isCached)
-{
- ulong length = limit+1;
- PHYSICAL_ADDRESS paIoBase = {0};
-
- /* NT loves large Ints */
- paIoBase = RtlConvertUlongToLargeInteger( base );
-
- /* Map IO space into Kernel */
- if (isCached)
- return (ULONG)MmMapIoSpace(paIoBase, length, MmCached );
- else
- return (ULONG)MmMapIoSpace(paIoBase, length, MmNonCached );
-}
-
-/****************************************************************************
-REMARKS:
-Adjust the page table caching bits directly. Requires ring 0 access and
-only works with DOS4GW and compatible extenders (CauseWay also works since
-it has direct support for the ring 0 instructions we need from ring 3). Will
-not work in a DOS box, but we call into the ring 0 helper VxD so we should
-never get here in a DOS box anyway (assuming the VxD is present). If we
-do get here and we are in windows, this code will be skipped.
-****************************************************************************/
-static void _PM_adjustPageTables(
- ulong linear,
- ulong limit,
- ibool isGlobal,
- ibool isCached)
-{
- int startPDB,endPDB,iPDB,startPage,endPage,start,end,iPage;
- ulong pageTable,*pPDB,*pPageTable;
- ulong mask = 0xFFFFFFFF;
- ulong bits = 0x00000000;
-
- /* Enable user level access for page table entry */
- if (isGlobal) {
- mask &= ~PAGE_FLAGS_USER;
- bits |= PAGE_FLAGS_USER;
- }
-
- /* Disable PCD bit if page table entry should be uncached */
- if (!isCached) {
- mask &= ~(PAGE_FLAGS_CACHE_DISABLE | PAGE_FLAGS_WRITE_THROUGH);
- bits |= (PAGE_FLAGS_CACHE_DISABLE | PAGE_FLAGS_WRITE_THROUGH);
- }
-
- pPDB = (ulong*)_PM_mapPhysicalToLinear(_PM_getPDB(),0xFFF,true);
- if (pPDB) {
- startPDB = (linear >> 22) & 0x3FF;
- startPage = (linear >> 12) & 0x3FF;
- endPDB = ((linear+limit) >> 22) & 0x3FF;
- endPage = ((linear+limit) >> 12) & 0x3FF;
- for (iPDB = startPDB; iPDB <= endPDB; iPDB++) {
- /* Set the bits in the page directory entry - required as per */
- /* Pentium 4 manual. This also takes care of the 4MB page entries */
- pPDB[iPDB] = (pPDB[iPDB] & mask) | bits;
- if (!(pPDB[iPDB] & PAGE_FLAGS_4MB)) {
- /* If we are dealing with 4KB pages then we need to iterate */
- /* through each of the page table entries */
- pageTable = pPDB[iPDB] & ~0xFFF;
- pPageTable = (ulong*)_PM_mapPhysicalToLinear(pageTable,0xFFF,true);
- start = (iPDB == startPDB) ? startPage : 0;
- end = (iPDB == endPDB) ? endPage : 0x3FF;
- for (iPage = start; iPage <= end; iPage++) {
- pPageTable[iPage] = (pPageTable[iPage] & mask) | bits;
- }
- MmUnmapIoSpace(pPageTable,0xFFF);
- }
- }
- MmUnmapIoSpace(pPDB,0xFFF);
- PM_flushTLB();
- }
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of shared memory. For NT we allocate shared memory
-as locked, global memory that is accessible from any memory context
-(including interrupt time context), which allows us to load our important
-data structure and code such that we can access it directly from a ring
-0 interrupt context.
-****************************************************************************/
-void * PMAPI PM_mallocShared(
- long size)
-{
- int i;
-
- /* First find a free slot in our shared memory table */
- for (i = 0; i < MAX_MEMORY_SHARED; i++) {
- if (shared[i].linear == 0)
- break;
- }
- if (i == MAX_MEMORY_SHARED)
- return NULL;
-
- /* Allocate the paged pool */
- shared[i].linear = ExAllocatePool(PagedPool, size);
-
- /* Create a list to manage this allocation */
- shared[i].pMdl = IoAllocateMdl(shared[i].linear,size,FALSE,FALSE,(PIRP) NULL);
-
- /* Lock this allocation in memory */
- MmProbeAndLockPages(shared[i].pMdl,KernelMode,IoModifyAccess);
-
- /* Modify bits to grant user access */
- _PM_adjustPageTables((ulong)shared[i].linear, size, true, true);
- return (void*)shared[i].linear;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of shared memory
-****************************************************************************/
-void PMAPI PM_freeShared(
- void *p)
-{
- int i;
-
- /* Find a shared memory block in our table and free it */
- for (i = 0; i < MAX_MEMORY_SHARED; i++) {
- if (shared[i].linear == p) {
- /* Unlock what we locked */
- MmUnlockPages(shared[i].pMdl);
-
- /* Free our MDL */
- IoFreeMdl(shared[i].pMdl);
-
- /* Free our mem */
- ExFreePool(shared[i].linear);
-
- /* Flag that is entry is available */
- shared[i].linear = 0;
- break;
- }
- }
-}
-
-/****************************************************************************
-REMARKS:
-Map a physical address to a linear address in the callers process.
-****************************************************************************/
-void * PMAPI PM_mapPhysicalAddr(
- ulong base,
- ulong limit,
- ibool isCached)
-{
- ulong linear,length = limit+1;
- int i;
-
- /* Search table of existing mappings to see if we have already mapped */
- /* a region of memory that will serve this purpose. */
- for (i = 0; i < numMappings; i++) {
- if (maps[i].physical == base && maps[i].length == length && maps[i].isCached == isCached) {
- _PM_adjustPageTables((ulong)maps[i].linear, maps[i].length, true, isCached);
- return (void*)maps[i].linear;
- }
- }
- if (numMappings == MAX_MEMORY_MAPPINGS)
- return NULL;
-
- /* We did not find any previously mapped memory region, so maps it in. */
- if ((linear = _PM_mapPhysicalToLinear(base,limit,isCached)) == 0xFFFFFFFF)
- return NULL;
- maps[numMappings].physical = base;
- maps[numMappings].length = length;
- maps[numMappings].linear = linear;
- maps[numMappings].isCached = isCached;
- numMappings++;
-
- /* Grant user access to this I/O space */
- _PM_adjustPageTables((ulong)linear, length, true, isCached);
- return (void*)linear;
-}
-
-/****************************************************************************
-REMARKS:
-Free a physical address mapping allocated by PM_mapPhysicalAddr.
-****************************************************************************/
-void PMAPI PM_freePhysicalAddr(
- void *ptr,
- ulong limit)
-{
- /* We don't free the memory mappings in here because we cache all */
- /* the memory mappings we create in the system for later use. */
-}
-
-/****************************************************************************
-REMARKS:
-Called when the device driver unloads to free all the page table mappings!
-****************************************************************************/
-void PMAPI _PM_freeMemoryMappings(void)
-{
- int i;
-
- for (i = 0; i < numMappings; i++)
- MmUnmapIoSpace((void *)maps[i].linear,maps[i].length);
-}
-
-/****************************************************************************
-REMARKS:
-Find the physical address of a linear memory address in current process.
-****************************************************************************/
-ulong PMAPI PM_getPhysicalAddr(
- void *p)
-{
- PHYSICAL_ADDRESS paOurAddress;
-
- paOurAddress = MmGetPhysicalAddress(p);
- return paOurAddress.LowPart;
-}
-
-/****************************************************************************
-REMARKS:
-Find the physical address of a linear memory address in current process.
-****************************************************************************/
-ibool PMAPI PM_getPhysicalAddrRange(
- void *p,
- ulong length,
- ulong *physAddress)
-{
- int i;
- ulong linear = (ulong)p & ~0xFFF;
-
- for (i = (length + 0xFFF) >> 12; i > 0; i--) {
- if ((*physAddress++ = PM_getPhysicalAddr((void*)linear)) == 0xFFFFFFFF)
- return false;
- linear += 4096;
- }
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-Allocates a block of locked physical memory.
-****************************************************************************/
-void * PMAPI PM_allocLockedMem(
- uint size,
- ulong *physAddr,
- ibool contiguous,
- ibool below16M)
-{
- int i;
- PHYSICAL_ADDRESS paOurAddress;
-
- /* First find a free slot in our shared memory table */
- for (i = 0; i < MAX_MEMORY_LOCKED; i++) {
- if (locked[i].linear == 0)
- break;
- }
- if (i == MAX_MEMORY_LOCKED)
- return NULL;
-
- /* HighestAcceptableAddress - Specifies the highest valid physical address */
- /* the driver can use. For example, if a device can only reference physical */
- /* memory in the lower 16MB, this value would be set to 0x00000000FFFFFF. */
- paOurAddress.HighPart = 0;
- if (below16M)
- paOurAddress.LowPart = 0x00FFFFFF;
- else
- paOurAddress.LowPart = 0xFFFFFFFF;
-
- if (contiguous) {
- /* Allocate from the non-paged pool (unfortunately 4MB pages) */
- locked[i].linear = MmAllocateContiguousMemory(size, paOurAddress);
- if (!locked[i].linear)
- return NULL;
-
- /* Flag no MDL */
- locked[i].pMdl = NULL;
-
- /* Map the physical address for the memory so we can manage */
- /* the page tables in 4KB chunks mapped into user space. */
-
- /* TODO: Map this with the physical address to the linear addresss */
- locked[i].mmIoMapped = locked[i].linear;
-
- /* Modify bits to grant user access, flag not cached */
- _PM_adjustPageTables((ulong)locked[i].mmIoMapped, size, true, false);
- return (void*)locked[i].mmIoMapped;
- }
- else {
- /* Allocate from the paged pool */
- locked[i].linear = ExAllocatePool(PagedPool, size);
- if (!locked[i].linear)
- return NULL;
-
- /* Create a list to manage this allocation */
- locked[i].pMdl = IoAllocateMdl(locked[i].linear,size,FALSE,FALSE,(PIRP) NULL);
-
- /* Lock this allocation in memory */
- MmProbeAndLockPages(locked[i].pMdl,KernelMode,IoModifyAccess);
-
- /* Modify bits to grant user access, flag not cached */
- _PM_adjustPageTables((ulong)locked[i].linear, size, true, false);
- return (void*)locked[i].linear;
- }
-}
-
-/****************************************************************************
-REMARKS:
-Frees a block of locked physical memory.
-****************************************************************************/
-void PMAPI PM_freeLockedMem(
- void *p,
- uint size,
- ibool contiguous)
-{
- int i;
-
- /* Find a locked memory block in our table and free it */
- for (i = 0; i < MAX_MEMORY_LOCKED; i++) {
- if (locked[i].linear == p) {
- /* An Mdl indicates that we used the paged pool, and locked it, */
- /* so now we have to unlock, free the MDL, and free paged */
- if (locked[i].pMdl) {
- /* Unlock what we locked and free the Mdl */
- MmUnlockPages(locked[i].pMdl);
- IoFreeMdl(locked[i].pMdl);
- ExFreePool(locked[i].linear);
- }
- else {
- /* TODO: Free the mmIoMap mapping for the memory! */
-
- /* Free non-paged pool */
- MmFreeContiguousMemory(locked[i].linear);
- }
-
- /* Flag that is entry is available */
- locked[i].linear = 0;
- break;
- }
- }
-}
-
-/****************************************************************************
-REMARKS:
-Allocates a page aligned and page sized block of memory
-****************************************************************************/
-void * PMAPI PM_allocPage(
- ibool locked)
-{
- /* Allocate the memory from the non-paged pool if we want the memory */
- /* to be locked. */
- return ExAllocatePool(
- locked ? NonPagedPoolCacheAligned : PagedPoolCacheAligned,
- PAGE_SIZE);
-}
-
-/****************************************************************************
-REMARKS:
-Free a page aligned and page sized block of memory
-****************************************************************************/
-void PMAPI PM_freePage(
- void *p)
-{
- if (p) ExFreePool(p);
-}
-
-/****************************************************************************
-REMARKS:
-Lock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_lockDataPages(
- void *p,
- uint len,
- PM_lockHandle *lh)
-{
- MDL *pMdl;
-
- /* Create a list to manage this allocation */
- if ((pMdl = IoAllocateMdl(p,len,FALSE,FALSE,(PIRP)NULL)) == NULL)
- return false;
-
- /* Lock this allocation in memory */
- MmProbeAndLockPages(pMdl,KernelMode,IoModifyAccess);
- *((PMDL*)(&lh->h)) = pMdl;
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-Unlock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_unlockDataPages(
- void *p,
- uint len,
- PM_lockHandle *lh)
-{
- if (p && lh) {
- /* Unlock what we locked */
- MDL *pMdl = *((PMDL*)(&lh->h));
- MmUnlockPages(pMdl);
- IoFreeMdl(pMdl);
- }
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-Lock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_lockCodePages(
- void (*p)(),
- uint len,
- PM_lockHandle *lh)
-{
- return PM_lockDataPages((void*)p,len,lh);
-}
-
-/****************************************************************************
-REMARKS:
-Unlock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_unlockCodePages(
- void (*p)(),
- uint len,
- PM_lockHandle *lh)
-{
- return PM_unlockDataPages((void*)p,len,lh);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/oshdr.h
deleted file mode 100644
index 65b7bae23c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/oshdr.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit Windows NT drivers
-*
-* Description: Include file to include all OS specific header files.
-*
-****************************************************************************/
-
-#ifndef __NTDRV_OSHDR_H
-#define __NTDRV_OSHDR_H
-
-/*--------------------------- Macros and Typedefs -------------------------*/
-
-/*---------------------------- Global variables ---------------------------*/
-
-/*--------------------------- Function Prototypes -------------------------*/
-
-/* Internal unicode string handling functions */
-
-UNICODE_STRING * _PM_CStringToUnicodeString(const char *cstr);
-void _PM_FreeUnicodeString(UNICODE_STRING *uniStr);
-
-#endif /* __NTDRV_OSHDR_H */
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/pm.c b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/pm.c
deleted file mode 100644
index c6606314c1..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/pm.c
+++ /dev/null
@@ -1,933 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit Windows NT device drivers.
-*
-* Description: Implementation for the OS Portability Manager Library, which
-* contains functions to implement OS specific services in a
-* generic, cross platform API. Porting the OS Portability
-* Manager library is the first step to porting any SciTech
-* products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "sdd/sddhelp.h"
-#include "mtrr.h"
-#include "oshdr.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-char _PM_cntPath[PM_MAX_PATH] = "";
-char _PM_nucleusPath[PM_MAX_PATH] = "";
-static void (PMAPIP fatalErrorCleanup)(void) = NULL;
-
-static char *szNTWindowsKey = "\\REGISTRY\\Machine\\Software\\Microsoft\\Windows NT\\CurrentVersion";
-static char *szNTSystemRoot = "SystemRoot";
-static char *szMachineNameKey = "\\REGISTRY\\Machine\\System\\CurrentControlSet\\control\\ComputerName\\ComputerName";
-static char *szMachineNameKeyNT = "\\REGISTRY\\Machine\\System\\CurrentControlSet\\control\\ComputerName\\ActiveComputerName";
-static char *szMachineName = "ComputerName";
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the PM library.
-****************************************************************************/
-void PMAPI PM_init(void)
-{
- /* Initialiase the MTRR module */
- MTRR_init();
-}
-
-/****************************************************************************
-REMARKS:
-Return the operating system type identifier.
-****************************************************************************/
-long PMAPI PM_getOSType(void)
-{
- return _OS_WINNTDRV;
-}
-
-/****************************************************************************
-REMARKS:
-Return the runtime type identifier.
-****************************************************************************/
-int PMAPI PM_getModeType(void)
-{
- return PM_386;
-}
-
-/****************************************************************************
-REMARKS:
-Add a file directory separator to the end of the filename.
-****************************************************************************/
-void PMAPI PM_backslash(char *s)
-{
- uint pos = strlen(s);
- if (s[pos-1] != '\\') {
- s[pos] = '\\';
- s[pos+1] = '\0';
- }
-}
-
-/****************************************************************************
-REMARKS:
-Add a user defined PM_fatalError cleanup function.
-****************************************************************************/
-void PMAPI PM_setFatalErrorCleanup(
- void (PMAPIP cleanup)(void))
-{
- fatalErrorCleanup = cleanup;
-}
-
-/****************************************************************************
-REMARKS:
-Handle fatal errors internally in the driver.
-****************************************************************************/
-void PMAPI PM_fatalError(
- const char *msg)
-{
- ULONG BugCheckCode = 0;
- ULONG MoreBugCheckData[4] = {0};
- char *p;
- ULONG len;
-
- if (fatalErrorCleanup)
- fatalErrorCleanup();
-
-#ifdef DBG /* Send output to debugger, just return so as not to force a reboot */
-#pragma message("INFO: building for debug, PM_fatalError() re-routed")
- DBGMSG2("SDDHELP> PM_fatalError(): ERROR: %s\n", msg);
- return ;
-#endif
- /* KeBugCheckEx brings down the system in a controlled */
- /* manner when the caller discovers an unrecoverable */
- /* inconsistency that would corrupt the system if */
- /* the caller continued to run. */
- /* */
- /* hack - dump the first 20 chars in hex using the variables */
- /* provided - Each ULONG is equal to four characters... */
- for(len = 0; len < 20; len++)
- if (msg[len] == (char)0)
- break;
-
- /* This looks bad but it's quick and reliable... */
- p = (char *)&BugCheckCode;
- if(len > 0) p[3] = msg[0];
- if(len > 1) p[2] = msg[1];
- if(len > 2) p[1] = msg[2];
- if(len > 3) p[0] = msg[3];
-
- p = (char *)&MoreBugCheckData[0];
- if(len > 4) p[3] = msg[4];
- if(len > 5) p[2] = msg[5];
- if(len > 6) p[1] = msg[6];
- if(len > 7) p[0] = msg[7];
-
- p = (char *)&MoreBugCheckData[1];
- if(len > 8) p[3] = msg[8];
- if(len > 9) p[2] = msg[9];
- if(len > 10) p[1] = msg[10];
- if(len > 11) p[0] = msg[11];
-
- p = (char *)&MoreBugCheckData[2];
- if(len > 12) p[3] = msg[12];
- if(len > 13) p[2] = msg[13];
- if(len > 14) p[1] = msg[14];
- if(len > 15) p[0] = msg[15];
-
- p = (char *)&MoreBugCheckData[3];
- if(len > 16) p[3] = msg[16];
- if(len > 17) p[2] = msg[17];
- if(len > 18) p[1] = msg[18];
- if(len > 19) p[0] = msg[19];
-
- /* Halt the system! */
- KeBugCheckEx(BugCheckCode, MoreBugCheckData[0], MoreBugCheckData[1], MoreBugCheckData[2], MoreBugCheckData[3]);
-}
-
-/****************************************************************************
-REMARKS:
-Return the current operating system path or working directory.
-****************************************************************************/
-char * PMAPI PM_getCurrentPath(
- char *path,
- int maxLen)
-{
- strncpy(path,_PM_cntPath,maxLen);
- path[maxLen-1] = 0;
- return path;
-}
-
-/****************************************************************************
-PARAMETERS:
-szKey - Key to query (can contain version number formatting)
-szValue - Value to get information for
-value - Place to store the registry key data read
-size - Size of the string buffer to read into
-
-RETURNS:
-true if the key was found, false if not.
-****************************************************************************/
-static ibool REG_queryString(
- char *szKey,
- const char *szValue,
- char *value,
- DWORD size)
-{
- ibool status;
- NTSTATUS rval;
- ULONG length;
- HANDLE Handle;
- OBJECT_ATTRIBUTES keyAttributes;
- UNICODE_STRING *uniKey = NULL;
- UNICODE_STRING *uniValue = NULL;
- PKEY_VALUE_FULL_INFORMATION fullInfo = NULL;
- STRING stringdata;
- UNICODE_STRING unidata;
-
- /* Convert strings to UniCode */
- status = false;
- if ((uniKey = _PM_CStringToUnicodeString(szKey)) == NULL)
- goto Exit;
- if ((uniValue = _PM_CStringToUnicodeString(szValue)) == NULL)
- goto Exit;
-
- /* Open the key */
- InitializeObjectAttributes( &keyAttributes,
- uniKey,
- OBJ_CASE_INSENSITIVE,
- NULL,
- NULL );
- rval = ZwOpenKey( &Handle,
- KEY_ALL_ACCESS,
- &keyAttributes );
- if (!NT_SUCCESS(rval))
- goto Exit;
-
- /* Query the value */
- length = sizeof (KEY_VALUE_FULL_INFORMATION)
- + size * sizeof(WCHAR);
- if ((fullInfo = ExAllocatePool (PagedPool, length)) == NULL)
- goto Exit;
- RtlZeroMemory(fullInfo, length);
- rval = ZwQueryValueKey (Handle,
- uniValue,
- KeyValueFullInformation,
- fullInfo,
- length,
- &length);
- if (NT_SUCCESS (rval)) {
- /* Create the UniCode string so we can convert it */
- unidata.Buffer = (PWCHAR)(((PCHAR)fullInfo) + fullInfo->DataOffset);
- unidata.Length = (USHORT)fullInfo->DataLength;
- unidata.MaximumLength = (USHORT)fullInfo->DataLength + sizeof(WCHAR);
-
- /* Convert unicode univalue to ansi string. */
- rval = RtlUnicodeStringToAnsiString(&stringdata, &unidata, TRUE);
- if (NT_SUCCESS(rval)) {
- strcpy(value,stringdata.Buffer);
- status = true;
- }
- }
-
-Exit:
- if (fullInfo) ExFreePool(fullInfo);
- if (uniKey) _PM_FreeUnicodeString(uniKey);
- if (uniValue) _PM_FreeUnicodeString(uniValue);
- return status;
-}
-
-/****************************************************************************
-REMARKS:
-Return the drive letter for the boot drive.
-****************************************************************************/
-char PMAPI PM_getBootDrive(void)
-{
- char path[256];
- if (REG_queryString(szNTWindowsKey,szNTSystemRoot,path,sizeof(path)))
- return 'c';
- return path[0];
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the VBE/AF driver files.
-****************************************************************************/
-const char * PMAPI PM_getVBEAFPath(void)
-{
- return "c:\\";
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the Nucleus driver files.
-****************************************************************************/
-const char * PMAPI PM_getNucleusPath(void)
-{
- static char path[256];
-
- if (strlen(_PM_nucleusPath) > 0) {
- strcpy(path,_PM_nucleusPath);
- PM_backslash(path);
- return path;
- }
- if (!REG_queryString(szNTWindowsKey,szNTSystemRoot,path,sizeof(path)))
- strcpy(path,"c:\\winnt");
- PM_backslash(path);
- strcat(path,"system32\\nucleus");
- return path;
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the Nucleus configuration files.
-****************************************************************************/
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
- static char path[256];
- strcpy(path,PM_getNucleusPath());
- PM_backslash(path);
- strcat(path,"config");
- return path;
-}
-
-/****************************************************************************
-REMARKS:
-Return a unique identifier for the machine if possible.
-****************************************************************************/
-const char * PMAPI PM_getUniqueID(void)
-{
- return PM_getMachineName();
-}
-
-/****************************************************************************
-REMARKS:
-Get the name of the machine on the network.
-****************************************************************************/
-const char * PMAPI PM_getMachineName(void)
-{
- static char name[256];
-
- if (REG_queryString(szMachineNameKey,szMachineName,name,sizeof(name)))
- return name;
- if (REG_queryString(szMachineNameKeyNT,szMachineName,name,sizeof(name)))
- return name;
- return "Unknown";
-}
-
-/****************************************************************************
-REMARKS:
-Check if a key has been pressed.
-****************************************************************************/
-int PMAPI PM_kbhit(void)
-{
- /* Not used in NT drivers */
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-Wait for and return the next keypress.
-****************************************************************************/
-int PMAPI PM_getch(void)
-{
- /* Not used in NT drivers */
- return 0xD;
-}
-
-/****************************************************************************
-REMARKS:
-Open a console for output to the screen, creating the main event handling
-window if necessary.
-****************************************************************************/
-PM_HWND PMAPI PM_openConsole(
- PM_HWND hwndUser,
- int device,
- int xRes,
- int yRes,
- int bpp,
- ibool fullScreen)
-{
- /* Not used in NT drivers */
- (void)hwndUser;
- (void)device;
- (void)xRes;
- (void)yRes;
- (void)bpp;
- (void)fullScreen;
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Find the size of the console state buffer.
-****************************************************************************/
-int PMAPI PM_getConsoleStateSize(void)
-{
- /* Not used in NT drivers */
- return 1;
-}
-
-/****************************************************************************
-REMARKS:
-Save the state of the console.
-****************************************************************************/
-void PMAPI PM_saveConsoleState(
- void *stateBuf,
- PM_HWND hwndConsole)
-{
- /* Not used in NT drivers */
- (void)stateBuf;
- (void)hwndConsole;
-}
-
-/****************************************************************************
-REMARKS:
-Set the suspend application callback for the fullscreen console.
-****************************************************************************/
-void PMAPI PM_setSuspendAppCallback(
- PM_saveState_cb saveState)
-{
- /* Not used in NT drivers */
- (void)saveState;
-}
-
-/****************************************************************************
-REMARKS:
-Restore the console state.
-****************************************************************************/
-void PMAPI PM_restoreConsoleState(
- const void *stateBuf,
- PM_HWND hwndConsole)
-{
- /* Not used in NT drivers */
- (void)stateBuf;
- (void)hwndConsole;
-}
-
-/****************************************************************************
-REMARKS:
-Close the fullscreen console.
-****************************************************************************/
-void PMAPI PM_closeConsole(
- PM_HWND hwndConsole)
-{
- /* Not used in NT drivers */
- (void)hwndConsole;
-}
-
-/****************************************************************************
-REMARKS:
-Set the location of the OS console cursor.
-****************************************************************************/
-void PMAPI PM_setOSCursorLocation(
- int x,
- int y)
-{
- /* Nothing to do for Windows */
- (void)x;
- (void)y;
-}
-
-/****************************************************************************
-REMARKS:
-Set the width of the OS console.
-****************************************************************************/
-void PMAPI PM_setOSScreenWidth(
- int width,
- int height)
-{
- /* Nothing to do for Windows */
- (void)width;
- (void)height;
-}
-
-/****************************************************************************
-REMARKS:
-Maps a shared memory block into process address space. Does nothing since
-the memory blocks are already globally mapped into all processes.
-****************************************************************************/
-void * PMAPI PM_mapToProcess(
- void *base,
- ulong limit)
-{
- /* Not used anymore */
- (void)base;
- (void)limit;
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Execute the POST on the secondary BIOS for a controller.
-****************************************************************************/
-ibool PMAPI PM_doBIOSPOST(
- ushort axVal,
- ulong BIOSPhysAddr,
- void *mappedBIOS,
- ulong BIOSLen)
-{
- /* This may not be possible in NT and should be done by the OS anyway */
- (void)axVal;
- (void)BIOSPhysAddr;
- (void)mappedBIOS;
- (void)BIOSLen;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Return a pointer to the real mode BIOS data area.
-****************************************************************************/
-void * PMAPI PM_getBIOSPointer(void)
-{
- /* Note that on NT this probably does not do what we expect! */
- return PM_mapPhysicalAddr(0x400, 0x1000, true);
-}
-
-/****************************************************************************
-REMARKS:
-Return a pointer to 0xA0000 physical VGA graphics framebuffer.
-****************************************************************************/
-void * PMAPI PM_getA0000Pointer(void)
-{
- return PM_mapPhysicalAddr(0xA0000,0xFFFF,false);
-}
-
-/****************************************************************************
-REMARKS:
-Sleep for the specified number of milliseconds.
-****************************************************************************/
-void PMAPI PM_sleep(
- ulong milliseconds)
-{
- /* We never use this in NT drivers */
- (void)milliseconds;
-}
-
-/****************************************************************************
-REMARKS:
-Return the base I/O port for the specified COM port.
-****************************************************************************/
-int PMAPI PM_getCOMPort(int port)
-{
- /* TODO: Re-code this to determine real values using the Plug and Play */
- /* manager for the OS. */
- switch (port) {
- case 0: return 0x3F8;
- case 1: return 0x2F8;
- case 2: return 0x3E8;
- case 3: return 0x2E8;
- }
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Return the base I/O port for the specified LPT port.
-****************************************************************************/
-int PMAPI PM_getLPTPort(int port)
-{
- /* TODO: Re-code this to determine real values using the Plug and Play */
- /* manager for the OS. */
- switch (port) {
- case 0: return 0x3BC;
- case 1: return 0x378;
- case 2: return 0x278;
- }
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Returns available memory. Not possible under Windows.
-****************************************************************************/
-void PMAPI PM_availableMemory(
- ulong *physical,
- ulong *total)
-{
- *physical = *total = 0;
-}
-
-/****************************************************************************
-REMARKS:
-OS specific shared libraries not supported inside a VxD
-****************************************************************************/
-PM_MODULE PMAPI PM_loadLibrary(
- const char *szDLLName)
-{
- /* Not used in NT drivers */
- (void)szDLLName;
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-OS specific shared libraries not supported inside a VxD
-****************************************************************************/
-void * PMAPI PM_getProcAddress(
- PM_MODULE hModule,
- const char *szProcName)
-{
- /* Not used in NT drivers */
- (void)hModule;
- (void)szProcName;
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-OS specific shared libraries not supported inside a VxD
-****************************************************************************/
-void PMAPI PM_freeLibrary(
- PM_MODULE hModule)
-{
- /* Not used in NT drivers */
- (void)hModule;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-void *PMAPI PM_findFirstFile(
- const char *filename,
- PM_findData *findData)
-{
- /* TODO: This function should start a directory enumeration search */
- /* given the filename (with wildcards). The data should be */
- /* converted and returned in the findData standard form. */
- (void)filename;
- (void)findData;
- return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
- void *handle,
- PM_findData *findData)
-{
- /* TODO: This function should find the next file in directory enumeration */
- /* search given the search criteria defined in the call to */
- /* PM_findFirstFile. The data should be converted and returned */
- /* in the findData standard form. */
- (void)handle;
- (void)findData;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
- void *handle)
-{
- /* TODO: This function should close the find process. This may do */
- /* nothing for some OS'es. */
- (void)handle;
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
- 1 - Drive A:
- 2 - Drive B:
- 3 - Drive C:
- etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
- char drive)
-{
- /* Not supported in NT drivers */
- (void)drive;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
- int drive,
- char *dir,
- int len)
-{
- /* Not supported in NT drivers */
- (void)drive;
- (void)dir;
- (void)len;
-}
-
-/****************************************************************************
-PARAMETERS:
-base - The starting physical base address of the region
-size - The size in bytes of the region
-type - Type to place into the MTRR register
-
-RETURNS:
-Error code describing the result.
-
-REMARKS:
-Function to enable write combining for the specified region of memory.
-****************************************************************************/
-int PMAPI PM_enableWriteCombine(
- ulong base,
- ulong size,
- uint type)
-{
- return MTRR_enableWriteCombine(base,size,type);
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
- const char *filename,
- uint attrib)
-{
- NTSTATUS status;
- ACCESS_MASK DesiredAccess = GENERIC_READ | GENERIC_WRITE;
- OBJECT_ATTRIBUTES ObjectAttributes;
- ULONG ShareAccess = FILE_SHARE_READ;
- ULONG CreateDisposition = FILE_OPEN;
- HANDLE FileHandle = NULL;
- UNICODE_STRING *uniFile = NULL;
- IO_STATUS_BLOCK IoStatusBlock;
- FILE_BASIC_INFORMATION FileBasic;
- char kernelFilename[PM_MAX_PATH+5];
- ULONG FileAttributes = 0;
-
- /* Convert file attribute flags */
- if (attrib & PM_FILE_READONLY)
- FileAttributes |= FILE_ATTRIBUTE_READONLY;
- if (attrib & PM_FILE_ARCHIVE)
- FileAttributes |= FILE_ATTRIBUTE_ARCHIVE;
- if (attrib & PM_FILE_HIDDEN)
- FileAttributes |= FILE_ATTRIBUTE_HIDDEN;
- if (attrib & PM_FILE_SYSTEM)
- FileAttributes |= FILE_ATTRIBUTE_SYSTEM;
-
- /* Add prefix for addressing the file system. "\??\" is short for "\DosDevices\" */
- strcpy(kernelFilename, "\\??\\");
- strcat(kernelFilename, filename);
-
- /* Convert filename string to ansi string */
- if ((uniFile = _PM_CStringToUnicodeString(kernelFilename)) == NULL)
- goto Exit;
-
- /* Must open a file to query it's attributes */
- InitializeObjectAttributes (&ObjectAttributes,
- uniFile,
- OBJ_CASE_INSENSITIVE,
- NULL,
- NULL );
- status = ZwCreateFile( &FileHandle,
- DesiredAccess | SYNCHRONIZE,
- &ObjectAttributes,
- &IoStatusBlock,
- NULL, /*AllocationSize OPTIONAL, */
- FILE_ATTRIBUTE_NORMAL,
- ShareAccess,
- CreateDisposition,
- FILE_RANDOM_ACCESS, /*CreateOptions, */
- NULL, /*EaBuffer OPTIONAL, */
- 0 /*EaLength (required if EaBuffer) */
- );
- if (!NT_SUCCESS (status))
- goto Exit;
-
- /* Query timestamps */
- status = ZwQueryInformationFile(FileHandle,
- &IoStatusBlock,
- &FileBasic,
- sizeof(FILE_BASIC_INFORMATION),
- FileBasicInformation
- );
- if (!NT_SUCCESS (status))
- goto Exit;
-
- /* Change the four bits we change */
- FileBasic.FileAttributes &= ~(FILE_ATTRIBUTE_READONLY | FILE_ATTRIBUTE_ARCHIVE
- | FILE_ATTRIBUTE_HIDDEN | FILE_ATTRIBUTE_SYSTEM);
- FileBasic.FileAttributes |= FileAttributes;
-
- /* Set timestamps */
- ZwSetInformationFile( FileHandle,
- &IoStatusBlock,
- &FileBasic,
- sizeof(FILE_BASIC_INFORMATION),
- FileBasicInformation
- );
-
-Exit:
- if (FileHandle) ZwClose(FileHandle);
- if (uniFile) _PM_FreeUnicodeString(uniFile);
- return;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file attributes for a specific file.
-****************************************************************************/
-uint PMAPI PM_getFileAttr(
- const char *filename)
-{
- NTSTATUS status;
- ACCESS_MASK DesiredAccess = GENERIC_READ | GENERIC_WRITE;
- OBJECT_ATTRIBUTES ObjectAttributes;
- ULONG ShareAccess = FILE_SHARE_READ;
- ULONG CreateDisposition = FILE_OPEN;
- HANDLE FileHandle = NULL;
- UNICODE_STRING *uniFile = NULL;
- IO_STATUS_BLOCK IoStatusBlock;
- FILE_BASIC_INFORMATION FileBasic;
- char kernelFilename[PM_MAX_PATH+5];
- ULONG FileAttributes = 0;
- uint retval = 0;
-
- /* Add prefix for addressing the file system. "\??\" is short for "\DosDevices\" */
- strcpy(kernelFilename, "\\??\\");
- strcat(kernelFilename, filename);
-
- /* Convert filename string to ansi string */
- if ((uniFile = _PM_CStringToUnicodeString(kernelFilename)) == NULL)
- goto Exit;
-
- /* Must open a file to query it's attributes */
- InitializeObjectAttributes (&ObjectAttributes,
- uniFile,
- OBJ_CASE_INSENSITIVE,
- NULL,
- NULL );
- status = ZwCreateFile( &FileHandle,
- DesiredAccess | SYNCHRONIZE,
- &ObjectAttributes,
- &IoStatusBlock,
- NULL, /*AllocationSize OPTIONAL, */
- FILE_ATTRIBUTE_NORMAL,
- ShareAccess,
- CreateDisposition,
- FILE_RANDOM_ACCESS, /*CreateOptions, */
- NULL, /*EaBuffer OPTIONAL, */
- 0 /*EaLength (required if EaBuffer) */
- );
- if (!NT_SUCCESS (status))
- goto Exit;
-
- /* Query timestamps */
- status = ZwQueryInformationFile(FileHandle,
- &IoStatusBlock,
- &FileBasic,
- sizeof(FILE_BASIC_INFORMATION),
- FileBasicInformation
- );
- if (!NT_SUCCESS (status))
- goto Exit;
-
- /* Translate the file attributes */
- if (FileBasic.FileAttributes & FILE_ATTRIBUTE_READONLY)
- retval |= PM_FILE_READONLY;
- if (FileBasic.FileAttributes & FILE_ATTRIBUTE_ARCHIVE)
- retval |= PM_FILE_ARCHIVE;
- if (FileBasic.FileAttributes & FILE_ATTRIBUTE_HIDDEN)
- retval |= PM_FILE_HIDDEN;
- if (FileBasic.FileAttributes & FILE_ATTRIBUTE_SYSTEM)
- retval |= PM_FILE_SYSTEM;
-
-Exit:
- if (FileHandle) ZwClose(FileHandle);
- if (uniFile) _PM_FreeUnicodeString(uniFile);
- return retval;
-}
-
-/****************************************************************************
-REMARKS:
-Function to create a directory.
-****************************************************************************/
-ibool PMAPI PM_mkdir(
- const char *filename)
-{
- /* Not supported in NT drivers */
- (void)filename;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to remove a directory.
-****************************************************************************/
-ibool PMAPI PM_rmdir(
- const char *filename)
-{
- /* Not supported in NT drivers */
- (void)filename;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_getFileTime(
- const char *filename,
- ibool gmTime,
- PM_time *time)
-{
- /* Not supported in NT drivers */
- (void)filename;
- (void)gmTime;
- (void)time;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to set the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_setFileTime(
- const char *filename,
- ibool gmTime,
- PM_time *time)
-{
- /* Not supported in NT drivers */
- (void)filename;
- (void)gmTime;
- (void)time;
- return false;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/stdio.c b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/stdio.c
deleted file mode 100644
index 658f1c80ab..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/stdio.c
+++ /dev/null
@@ -1,330 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit Windows NT driver
-*
-* Description: C library compatible I/O functions for use within a Windows
-* NT driver.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "oshdr.h"
-
-/*------------------------ Main Code Implementation -----------------------*/
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C fopen function.
-****************************************************************************/
-FILE * fopen(
- const char *filename,
- const char *mode)
-{
- ACCESS_MASK DesiredAccess; /* for ZwCreateFile... */
- OBJECT_ATTRIBUTES ObjectAttributes;
- ULONG ShareAccess;
- ULONG CreateDisposition;
- NTSTATUS status;
- HANDLE FileHandle;
- UNICODE_STRING *uniFile = NULL;
- PWCHAR bufFile = NULL;
- IO_STATUS_BLOCK IoStatusBlock;
- FILE_STANDARD_INFORMATION FileInformation;
- FILE_POSITION_INFORMATION FilePosition;
- char kernelFilename[PM_MAX_PATH+5];
- FILE *f;
-
- /* Add prefix for addressing the file system. "\??\" is short for "\DosDevices\" */
- strcpy(kernelFilename, "\\??\\");
- strcat(kernelFilename, filename);
- if ((f = PM_malloc(sizeof(FILE))) == NULL)
- goto Error;
- f->offset = 0;
- f->text = (mode[1] == 't' || mode[2] == 't');
- f->writemode = (mode[0] == 'w') || (mode[0] == 'a');
- if (mode[0] == 'r') {
- /* omode = OPEN_ACCESS_READONLY | OPEN_SHARE_COMPATIBLE; */
- /* action = ACTION_IFEXISTS_OPEN | ACTION_IFNOTEXISTS_FAIL; */
- DesiredAccess = GENERIC_READ;
- ShareAccess = FILE_SHARE_READ | FILE_SHARE_WRITE;
- CreateDisposition = FILE_OPEN;
- }
- else if (mode[0] == 'w') {
- /* omode = OPEN_ACCESS_WRITEONLY | OPEN_SHARE_COMPATIBLE; */
- /* action = ACTION_IFEXISTS_TRUNCATE | ACTION_IFNOTEXISTS_CREATE; */
- DesiredAccess = GENERIC_WRITE;
- ShareAccess = FILE_SHARE_READ | FILE_SHARE_WRITE;
- CreateDisposition = FILE_SUPERSEDE;
- }
- else {
- /* omode = OPEN_ACCESS_READWRITE | OPEN_SHARE_COMPATIBLE; */
- /* action = ACTION_IFEXISTS_OPEN | ACTION_IFNOTEXISTS_CREATE; */
- DesiredAccess = GENERIC_READ | GENERIC_WRITE;
- ShareAccess = FILE_SHARE_READ;
- CreateDisposition = FILE_OPEN_IF;
- }
-
- /* Convert filename string to ansi string and then to UniCode string */
- if ((uniFile = _PM_CStringToUnicodeString(kernelFilename)) == NULL)
- return NULL;
-
- /* Create the file */
- InitializeObjectAttributes (&ObjectAttributes,
- uniFile,
- OBJ_CASE_INSENSITIVE,
- NULL,
- NULL);
- status = ZwCreateFile( &FileHandle,
- DesiredAccess | SYNCHRONIZE,
- &ObjectAttributes,
- &IoStatusBlock,
- NULL, /* AllocationSize OPTIONAL, */
- FILE_ATTRIBUTE_NORMAL,
- ShareAccess,
- CreateDisposition,
- FILE_RANDOM_ACCESS, /* CreateOptions, */
- NULL, /* EaBuffer OPTIONAL, */
- 0 /* EaLength (required if EaBuffer) */
- );
- if (!NT_SUCCESS (status))
- goto Error;
- f->handle = (int)FileHandle;
-
- /* Determine size of the file */
- status = ZwQueryInformationFile( FileHandle,
- &IoStatusBlock,
- &FileInformation,
- sizeof(FILE_STANDARD_INFORMATION),
- FileStandardInformation
- );
- if (!NT_SUCCESS (status))
- goto Error;
- f->filesize = FileInformation.EndOfFile.LowPart;
-
- /* Move to the end of the file if we are appending */
- if (mode[0] == 'a') {
- FilePosition.CurrentByteOffset.HighPart = 0;
- FilePosition.CurrentByteOffset.LowPart = f->filesize;
- status = ZwSetInformationFile( FileHandle,
- &IoStatusBlock,
- &FilePosition,
- sizeof(FILE_POSITION_INFORMATION),
- FilePositionInformation
- );
- if (!NT_SUCCESS (status))
- goto Error;
- }
- return f;
-
-Error:
- if (f) PM_free(f);
- if (uniFile) _PM_FreeUnicodeString(uniFile);
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C fread function.
-****************************************************************************/
-size_t fread(
- void *ptr,
- size_t size,
- size_t n,
- FILE *f)
-{
- NTSTATUS status;
- IO_STATUS_BLOCK IoStatusBlock;
- LARGE_INTEGER ByteOffset;
-
- /* Read any extra bytes from the file */
- ByteOffset.HighPart = 0;
- ByteOffset.LowPart = f->offset;
- status = ZwReadFile( (HANDLE)f->handle,
- NULL, /*IN HANDLE Event OPTIONAL, */
- NULL, /* IN PIO_APC_ROUTINE ApcRoutine OPTIONAL, */
- NULL, /* IN PVOID ApcContext OPTIONAL, */
- &IoStatusBlock,
- ptr, /* OUT PVOID Buffer, */
- size * n, /*IN ULONG Length, */
- &ByteOffset, /*OPTIONAL, */
- NULL /*IN PULONG Key OPTIONAL */
- );
- if (!NT_SUCCESS (status))
- return 0;
- f->offset += IoStatusBlock.Information;
- return IoStatusBlock.Information / size;
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C fwrite function.
-****************************************************************************/
-size_t fwrite(
- const void *ptr,
- size_t size,
- size_t n,
- FILE *f)
-{
- NTSTATUS status;
- IO_STATUS_BLOCK IoStatusBlock;
- LARGE_INTEGER ByteOffset;
-
- if (!f->writemode)
- return 0;
- ByteOffset.HighPart = 0;
- ByteOffset.LowPart = f->offset;
- status = ZwWriteFile( (HANDLE)f->handle,
- NULL, /*IN HANDLE Event OPTIONAL, */
- NULL, /* IN PIO_APC_ROUTINE ApcRoutine OPTIONAL, */
- NULL, /* IN PVOID ApcContext OPTIONAL, */
- &IoStatusBlock,
- (void*)ptr, /* OUT PVOID Buffer, */
- size * n, /*IN ULONG Length, */
- &ByteOffset, /*OPTIONAL, */
- NULL /*IN PULONG Key OPTIONAL */
- );
- if (!NT_SUCCESS (status))
- return 0;
- f->offset += IoStatusBlock.Information;
- if (f->offset > f->filesize)
- f->filesize = f->offset;
- return IoStatusBlock.Information / size;
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C fflush function.
-****************************************************************************/
-int fflush(
- FILE *f)
-{
- /* Nothing to do here as we are not doing buffered I/O */
- (void)f;
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C fseek function.
-****************************************************************************/
-int fseek(
- FILE *f,
- long int offset,
- int whence)
-{
- NTSTATUS status;
- FILE_POSITION_INFORMATION FilePosition;
- IO_STATUS_BLOCK IoStatusBlock;
-
- if (whence == 0)
- f->offset = offset;
- else if (whence == 1)
- f->offset += offset;
- else if (whence == 2)
- f->offset = f->filesize + offset;
- FilePosition.CurrentByteOffset.HighPart = 0;
- FilePosition.CurrentByteOffset.LowPart = f->offset;
- status = ZwSetInformationFile( (HANDLE)f->handle,
- &IoStatusBlock,
- &FilePosition,
- sizeof(FILE_POSITION_INFORMATION),
- FilePositionInformation
- );
- if (!NT_SUCCESS (status))
- return -1;
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C ftell function.
-****************************************************************************/
-long ftell(
- FILE *f)
-{
- return f->offset;
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C feof function.
-****************************************************************************/
-int feof(
- FILE *f)
-{
- return (f->offset == f->filesize);
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C fgets function.
-****************************************************************************/
-char *fgets(
- char *s,
- int n,
- FILE *f)
-{
- int len;
- char *cs;
-
- /* Read the entire buffer into memory (our functions are unbuffered!) */
- if ((len = fread(s,1,n,f)) == 0)
- return NULL;
-
- /* Search for '\n' or end of string */
- if (n > len)
- n = len;
- cs = s;
- while (--n > 0) {
- if (*cs == '\n')
- break;
- cs++;
- }
- *cs = '\0';
- return s;
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C fputs function.
-****************************************************************************/
-int fputs(
- const char *s,
- FILE *f)
-{
- return fwrite(s,1,strlen(s),f);
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C fclose function.
-****************************************************************************/
-int fclose(
- FILE *f)
-{
- ZwClose((HANDLE)f->handle);
- PM_free(f);
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/stdlib.c b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/stdlib.c
deleted file mode 100644
index bbf0cbf4a7..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/stdlib.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit Windows NT driver
-*
-* Description: C library compatible stdlib.h functions for use within a
-* Windows NT driver.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "oshdr.h"
-
-/*------------------------ Main Code Implementation -----------------------*/
-
-/****************************************************************************
-REMARKS:
-PM_malloc override function for Nucleus drivers loaded in NT drivers's.
-****************************************************************************/
-void * malloc(
- size_t size)
-{
- return PM_mallocShared(size);
-}
-
-/****************************************************************************
-REMARKS:
-calloc library function for Nucleus drivers loaded in NT drivers's.
-****************************************************************************/
-void * calloc(
- size_t nelem,
- size_t size)
-{
- void *p = PM_mallocShared(nelem * size);
- if (p)
- memset(p,0,nelem * size);
- return p;
-}
-
-/****************************************************************************
-REMARKS:
-PM_realloc override function for Nucleus drivers loaded in VxD's.
-****************************************************************************/
-void * realloc(
- void *ptr,
- size_t size)
-{
- void *p = PM_mallocShared(size);
- if (p) {
- memcpy(p,ptr,size);
- PM_freeShared(ptr);
- }
- return p;
-}
-
-/****************************************************************************
-REMARKS:
-PM_free override function for Nucleus drivers loaded in VxD's.
-****************************************************************************/
-void free(
- void *p)
-{
- PM_freeShared(p);
-}
-
-/****************************************************************************
-PARAMETERS:
-cstr - C style ANSI string to convert
-
-RETURNS:
-Pointer to the UniCode string structure or NULL on failure to allocate memory
-
-REMARKS:
-Converts a C style string to a UniCode string structure that can be passed
-directly to NT kernel functions.
-****************************************************************************/
-UNICODE_STRING *_PM_CStringToUnicodeString(
- const char *cstr)
-{
- int length;
- ANSI_STRING ansiStr;
- UNICODE_STRING *uniStr;
-
- /* Allocate memory for the string structure */
- if ((uniStr = ExAllocatePool(NonPagedPool, sizeof(UNICODE_STRING))) == NULL)
- return NULL;
-
- /* Allocate memory for the wide string itself */
- length = (strlen(cstr) * sizeof(WCHAR)) + sizeof(WCHAR);
- if ((uniStr->Buffer = ExAllocatePool(NonPagedPool, length)) == NULL) {
- ExFreePool(uniStr);
- return NULL;
- }
- RtlZeroMemory(uniStr->Buffer, length);
- uniStr->Length = 0;
- uniStr->MaximumLength = (USHORT)length;
-
- /* Convert filename string to ansi string and then to UniCode string */
- RtlInitAnsiString(&ansiStr, cstr);
- RtlAnsiStringToUnicodeString(uniStr, &ansiStr, FALSE);
- return uniStr;
-}
-
-/****************************************************************************
-PARAMETERS:
-uniStr - UniCode string structure to free
-
-REMARKS:
-Frees a string allocated by the above _PM_CStringToUnicodeString function.
-****************************************************************************/
-void _PM_FreeUnicodeString(
- UNICODE_STRING *uniStr)
-{
- if (uniStr) {
- ExFreePool(uniStr->Buffer);
- ExFreePool(uniStr);
- }
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/vflat.c
deleted file mode 100644
index 901ce1cf03..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/vflat.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-ibool PMAPI VF_available(void)
-{
- return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
- return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/ntdrv/ztimer.c
deleted file mode 100644
index f4c4bd41b2..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ntdrv/ztimer.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit Windows VxD
-*
-* Description: OS specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-/*---------------------------- Global variables ---------------------------*/
-
-static CPU_largeInteger countFreq;
-static ulong start,finish;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-static void __ZTimerInit(void)
-{
- KeQueryPerformanceCounter((LARGE_INTEGER*)&countFreq);
-}
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-static void __LZTimerOn(
- LZTimerObject *tm)
-{
- LARGE_INTEGER lt = KeQueryPerformanceCounter(NULL);
- tm->start.low = lt.LowPart;
- tm->start.high = lt.HighPart;
-}
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-static ulong __LZTimerLap(
- LZTimerObject *tm)
-{
- LARGE_INTEGER tmLap = KeQueryPerformanceCounter(NULL);
- CPU_largeInteger tmCount;
-
- _CPU_diffTime64(&tm->start,(CPU_largeInteger*)&tmLap,&tmCount);
- return _CPU_calcMicroSec(&tmCount,countFreq.low);
-}
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-static void __LZTimerOff(
- LZTimerObject *tm)
-{
- LARGE_INTEGER lt = KeQueryPerformanceCounter(NULL);
- tm->end.low = lt.LowPart;
- tm->end.high = lt.HighPart;
-}
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-static ulong __LZTimerCount(
- LZTimerObject *tm)
-{
- CPU_largeInteger tmCount;
-
- _CPU_diffTime64(&tm->start,&tm->end,&tmCount);
- return _CPU_calcMicroSec(&tmCount,countFreq.low);
-}
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION 1
-
-/****************************************************************************
-REMARKS:
-Read the Long Period timer value from the BIOS timer tick.
-****************************************************************************/
-static ulong __ULZReadTime(void)
-{
- LARGE_INTEGER count;
- KeQuerySystemTime(&count);
- return (ulong)(*((_int64*)&count) / 10);
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{ return finish - start; }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2/_pmos2.asm b/board/MAI/bios_emulator/scitech/src/pm/os2/_pmos2.asm
deleted file mode 100644
index 761f0f42e1..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2/_pmos2.asm
+++ /dev/null
@@ -1,180 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Language: 80386 Assembler, TASM 4.0 or NASM
-;* Environment: OS/2 32 bit protected mode
-;*
-;* Description: Low level assembly support for the PM library specific
-;* to OS/2
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac" ; Memory model macros
-
-header _pmos2 ; Set up memory model
-
-begdataseg _pmos2
-
- cglobal _PM_ioentry
- cglobal _PM_gdt
-_PM_ioentry dd 0 ; Offset to call gate
-_PM_gdt dw 0 ; Selector to call gate
-
-enddataseg _pmos2
-
-begcodeseg _pmos2 ; Start of code segment
-
-;----------------------------------------------------------------------------
-; int PM_setIOPL(int iopl)
-;----------------------------------------------------------------------------
-; Change the IOPL level for the 32-bit task. Returns the previous level
-; so it can be restored for the task correctly.
-;----------------------------------------------------------------------------
-cprocstart PM_setIOPL
-
- ARG iopl:UINT
-
- enter_c
- pushfd ; Save the old EFLAGS for later
- mov ecx,[iopl] ; ECX := IOPL level
- xor ebx,ebx ; Change IOPL level function code (0)
-ifdef USE_NASM
- call far dword [_PM_ioentry]
-else
- call [FWORD _PM_ioentry]
-endif
- pop eax
- and eax,0011000000000000b
- shr eax,12
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _PM_setGDTSelLimit(ushort selector, ulong limit);
-;----------------------------------------------------------------------------
-; Change the GDT selector limit to given value. Used to change selector
-; limits to address the entire system address space.
-;----------------------------------------------------------------------------
-cprocstart _PM_setGDTSelLimit
-
- ARG selector:USHORT, limit:UINT
-
- enter_c
- sub esp,20 ; Make room for selector data on stack
- mov ecx,esp ; ECX := selector data structure
- mov bx,[selector] ; Fill out the data structure
- and bx,0FFF8h ; Kick out the LDT/GDT and DPL bits
- mov [WORD ecx],bx
- mov ebx,[limit]
- mov [DWORD ecx+4],ebx
- mov ebx,5 ; Set GDT selector limit function code
-ifdef USE_NASM
- call far dword [_PM_ioentry]
-else
- call [FWORD _PM_ioentry]
-endif
- add esp,20
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uchar _MTRR_getCx86(uchar reg);
-;----------------------------------------------------------------------------
-; Read a Cyrix CPU indexed register
-;----------------------------------------------------------------------------
-cprocstart _MTRR_getCx86
-
- ARG reg:UCHAR
-
- enter_c
- mov al,[reg]
- out 22h,al
- in al,23h
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uchar _MTRR_setCx86(uchar reg,uchar val);
-;----------------------------------------------------------------------------
-; Write a Cyrix CPU indexed register
-;----------------------------------------------------------------------------
-cprocstart _MTRR_setCx86
-
- ARG reg:UCHAR, val:UCHAR
-
- enter_c
- mov al,[reg]
- out 22h,al
- mov al,[val]
- out 23h,al
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong _MTRR_disableInt(void);
-;----------------------------------------------------------------------------
-; Return processor interrupt status and disable interrupts.
-;----------------------------------------------------------------------------
-cprocstart _MTRR_disableInt
-
-; Do nothing!
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _MTRR_restoreInt(ulong ps);
-;----------------------------------------------------------------------------
-; Restore processor interrupt status.
-;----------------------------------------------------------------------------
-cprocstart _MTRR_restoreInt
-
-; Do nothing!
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void DebugInt(void)
-;----------------------------------------------------------------------------
-cprocstart DebugInt
-
- int 3
- ret
-
-cprocend
-
-endcodeseg _pmos2
-
- END ; End of module
-
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/os2/cpuinfo.c
deleted file mode 100644
index 7de400d067..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2/cpuinfo.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: OS/2
-*
-* Description: OS/2 specific code for the CPU detection module.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-TODO: This should be implemented for OS/2!
-****************************************************************************/
-#define SetMaxThreadPriority() 0
-
-/****************************************************************************
-REMARKS:
-TODO: This should be implemented for OS/2!
-****************************************************************************/
-#define RestoreThreadPriority(i)
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
- CPU_largeInteger *freq)
-{
- freq->low = 100000;
- freq->high = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-****************************************************************************/
-#define GetCounter(t) \
-{ \
- ULONG count; \
- DosQuerySysInfo( QSV_MS_COUNT, QSV_MS_COUNT, &count, sizeof(ULONG) ); \
- (t)->low = count * 100; \
- (t)->high = 0; \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2/event.c b/board/MAI/bios_emulator/scitech/src/pm/os2/event.c
deleted file mode 100644
index 91cc19b915..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2/event.c
+++ /dev/null
@@ -1,565 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: IBM PC (OS/2)
-*
-* Description: OS/2 implementation for the SciTech cross platform
-* event library.
-*
-****************************************************************************/
-
-/*---------------------------- Global Variables ---------------------------*/
-
-/* Define generous keyboard monitor circular buffer size to minimize
- * the danger of losing keystrokes
- */
-#define KEYBUFSIZE (EVENTQSIZE + 10)
-
-static int oldMouseState; /* Old mouse state */
-static ulong oldKeyMessage; /* Old keyboard state */
-static ushort keyUpMsg[256] = {0}; /* Table of key up messages */
-static int rangeX,rangeY; /* Range of mouse coordinates */
-HMOU _EVT_hMouse; /* Handle to the mouse driver */
-HMONITOR _EVT_hKbdMon; /* Handle to the keyboard driver */
-TID kbdMonTID = 0; /* Keyboard monitor thread ID */
-HEV hevStart; /* Start event semaphore handle */
-BOOL bMonRunning; /* Flag set if monitor thread OK */
-HMTX hmtxKeyBuf; /* Mutex protecting key buffer */
-KEYPACKET keyMonPkts[KEYBUFSIZE]; /* Array of monitor key packets */
-int kpHead = 0; /* Key packet buffer head */
-int kpTail = 0; /* Key packet buffer tail */
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* These are not used under OS/2 */
-#define _EVT_disableInt() 1
-#define _EVT_restoreInt(flags)
-
-/****************************************************************************
-PARAMETERS:
-scanCode - Scan code to test
-
-REMARKS:
-This macro determines if a specified key is currently down at the
-time that the call is made.
-****************************************************************************/
-#define _EVT_isKeyDown(scanCode) (keyUpMsg[scanCode] != 0)
-
-/****************************************************************************
-REMARKS:
-This function is used to return the number of ticks since system
-startup in milliseconds. This should be the same value that is placed into
-the time stamp fields of events, and is used to implement auto mouse down
-events.
-****************************************************************************/
-ulong _EVT_getTicks(void)
-{
- ULONG count;
- DosQuerySysInfo( QSV_MS_COUNT, QSV_MS_COUNT, &count, sizeof(ULONG) );
- return count;
-}
-
-/****************************************************************************
-REMARKS:
-Converts a mickey movement value to a pixel adjustment value.
-****************************************************************************/
-static int MickeyToPixel(
- int mickey)
-{
- /* TODO: We can add some code in here to handle 'acceleration' for */
- /* the mouse cursor. For now just use the mickeys. */
- return mickey;
-}
-
-/* Some useful defines any typedefs used in the keyboard handling */
-#define KEY_RELEASE 0x40
-
-/****************************************************************************
-REMARKS:
-Pumps all messages in the message queue from OS/2 into our event queue.
-****************************************************************************/
-static void _EVT_pumpMessages(void)
-{
- KBDINFO keyInfo; /* Must not cross a 64K boundary */
- KBDKEYINFO key; /* Must not cross a 64K boundary */
- MOUQUEINFO mqueue; /* Must not cross a 64K boundary */
- MOUEVENTINFO mouse; /* Must not cross a 64K boundary */
- ushort mWait; /* Must not cross a 64K boundary */
- KEYPACKET kp; /* Must not cross a 64K boundary */
- event_t evt;
- int scan;
- ibool noInput = TRUE; /* Flag to determine if any input was available */
-
- /* First of all, check if we should do any session switch work */
- __PM_checkConsoleSwitch();
-
- /* Pump all keyboard messages from our circular buffer */
- for (;;) {
- /* Check that the monitor thread is still running */
- if (!bMonRunning)
- PM_fatalError("Keyboard monitor thread died!");
-
- /* Protect keypacket buffer with mutex */
- DosRequestMutexSem(hmtxKeyBuf, SEM_INDEFINITE_WAIT);
- if (kpHead == kpTail) {
- DosReleaseMutexSem(hmtxKeyBuf);
- break;
- }
-
- noInput = FALSE;
-
- /* Read packet from circular buffer and remove it */
- memcpy(&kp, &keyMonPkts[kpTail], sizeof(KEYPACKET));
- if (++kpTail == KEYBUFSIZE)
- kpTail = 0;
- DosReleaseMutexSem(hmtxKeyBuf);
-
- /* Compensate for the 0xE0 character */
- if (kp.XlatedScan && kp.XlatedChar == 0xE0)
- kp.XlatedChar = 0;
-
- /* Determine type of keyboard event */
- memset(&evt,0,sizeof(evt));
- if (kp.KbdDDFlagWord & KEY_RELEASE)
- evt.what = EVT_KEYUP;
- else
- evt.what = EVT_KEYDOWN;
-
- /* Convert keyboard codes */
- scan = kp.MonFlagWord >> 8;
- if (evt.what == EVT_KEYUP) {
- /* Get message for keyup code from table of cached down values */
- evt.message = keyUpMsg[scan];
- keyUpMsg[scan] = 0;
- oldKeyMessage = -1;
- }
- else {
- evt.message = ((ulong)scan << 8) | kp.XlatedChar;
- if (evt.message == keyUpMsg[scan]) {
- evt.what = EVT_KEYREPEAT;
- evt.message |= 0x10000;
- }
- oldKeyMessage = evt.message & 0x0FFFF;
- keyUpMsg[scan] = (ushort)evt.message;
- }
-
- /* Convert shift state modifiers */
- if (kp.u.ShiftState & 0x0001)
- evt.modifiers |= EVT_RIGHTSHIFT;
- if (kp.u.ShiftState & 0x0002)
- evt.modifiers |= EVT_LEFTSHIFT;
- if (kp.u.ShiftState & 0x0100)
- evt.modifiers |= EVT_LEFTCTRL;
- if (kp.u.ShiftState & 0x0200)
- evt.modifiers |= EVT_LEFTALT;
- if (kp.u.ShiftState & 0x0400)
- evt.modifiers |= EVT_RIGHTCTRL;
- if (kp.u.ShiftState & 0x0800)
- evt.modifiers |= EVT_RIGHTALT;
- EVT.oldMove = -1;
-
- /* Add time stamp and add the event to the queue */
- evt.when = key.time;
- if (EVT.count < EVENTQSIZE)
- addEvent(&evt);
- }
-
- /* Don't just flush because that terminally confuses the monitor */
- do {
- KbdCharIn(&key, IO_NOWAIT, 0);
- } while (key.fbStatus & KBDTRF_FINAL_CHAR_IN);
-
- /* Pump all mouse messages */
- KbdGetStatus(&keyInfo,0);
- /* Check return code - mouse may not be operational!! */
- if (MouGetNumQueEl(&mqueue,_EVT_hMouse) == NO_ERROR) {
- while (mqueue.cEvents) {
- while (mqueue.cEvents--) {
- memset(&evt,0,sizeof(evt));
- mWait = MOU_NOWAIT;
- MouReadEventQue(&mouse,&mWait,_EVT_hMouse);
-
- /* Update the mouse position. We get the mouse coordinates
- * in mickeys so we have to translate these into pixels and
- * move our mouse position. If we don't do this, OS/2 gives
- * us the coordinates in character positions since it still
- * thinks we are in text mode!
- */
- EVT.mx += MickeyToPixel(mouse.col);
- EVT.my += MickeyToPixel(mouse.row);
- if (EVT.mx < 0) EVT.mx = 0;
- if (EVT.my < 0) EVT.my = 0;
- if (EVT.mx > rangeX) EVT.mx = rangeX;
- if (EVT.my > rangeY) EVT.my = rangeY;
- evt.where_x = EVT.mx;
- evt.where_y = EVT.my;
- evt.relative_x = mouse.col;
- evt.relative_y = mouse.row;
- evt.when = key.time;
- if (mouse.fs & (MOUSE_BN1_DOWN | MOUSE_MOTION_WITH_BN1_DOWN))
- evt.modifiers |= EVT_LEFTBUT;
- if (mouse.fs & (MOUSE_BN2_DOWN | MOUSE_MOTION_WITH_BN2_DOWN))
- evt.modifiers |= EVT_RIGHTBUT;
- if (mouse.fs & (MOUSE_BN3_DOWN | MOUSE_MOTION_WITH_BN3_DOWN))
- evt.modifiers |= EVT_MIDDLEBUT;
- if (keyInfo.fsState & 0x0001)
- evt.modifiers |= EVT_RIGHTSHIFT;
- if (keyInfo.fsState & 0x0002)
- evt.modifiers |= EVT_LEFTSHIFT;
- if (keyInfo.fsState & 0x0100)
- evt.modifiers |= EVT_LEFTCTRL;
- if (keyInfo.fsState & 0x0200)
- evt.modifiers |= EVT_LEFTALT;
- if (keyInfo.fsState & 0x0400)
- evt.modifiers |= EVT_RIGHTCTRL;
- if (keyInfo.fsState & 0x0800)
- evt.modifiers |= EVT_RIGHTALT;
-
- /* Check for left mouse click events */
- /* 0x06 == (MOUSE_BN1_DOWN | MOUSE_MOTION_WITH_BN1_DOWN) */
- if (((mouse.fs & 0x0006) && !(oldMouseState & 0x0006))
- || (!(mouse.fs & 0x0006) && (oldMouseState & 0x0006))) {
- if (mouse.fs & 0x0006)
- evt.what = EVT_MOUSEDOWN;
- else
- evt.what = EVT_MOUSEUP;
- evt.message = EVT_LEFTBMASK;
- EVT.oldMove = -1;
- if (EVT.count < EVENTQSIZE)
- addEvent(&evt);
- }
-
- /* Check for right mouse click events */
- /* 0x0018 == (MOUSE_BN2_DOWN | MOUSE_MOTION_WITH_BN2_DOWN) */
- if (((mouse.fs & 0x0018) && !(oldMouseState & 0x0018))
- || (!(mouse.fs & 0x0018) && (oldMouseState & 0x0018))) {
- if (mouse.fs & 0x0018)
- evt.what = EVT_MOUSEDOWN;
- else
- evt.what = EVT_MOUSEUP;
- evt.message = EVT_RIGHTBMASK;
- EVT.oldMove = -1;
- if (EVT.count < EVENTQSIZE)
- addEvent(&evt);
- }
-
- /* Check for middle mouse click events */
- /* 0x0060 == (MOUSE_BN3_DOWN | MOUSE_MOTION_WITH_BN3_DOWN) */
- if (((mouse.fs & 0x0060) && !(oldMouseState & 0x0060))
- || (!(mouse.fs & 0x0060) && (oldMouseState & 0x0060))) {
- if (mouse.fs & 0x0060)
- evt.what = EVT_MOUSEDOWN;
- else
- evt.what = EVT_MOUSEUP;
- evt.message = EVT_MIDDLEBMASK;
- EVT.oldMove = -1;
- if (EVT.count < EVENTQSIZE)
- addEvent(&evt);
- }
-
- /* Check for mouse movement event */
- if (mouse.fs & 0x002B) {
- evt.what = EVT_MOUSEMOVE;
- if (EVT.oldMove != -1) {
- EVT.evtq[EVT.oldMove].where_x = evt.where_x;/* Modify existing one */
- EVT.evtq[EVT.oldMove].where_y = evt.where_y;
- }
- else {
- EVT.oldMove = EVT.freeHead; /* Save id of this move event */
- if (EVT.count < EVENTQSIZE)
- addEvent(&evt);
- }
- }
-
- /* Save current mouse state */
- oldMouseState = mouse.fs;
- }
- MouGetNumQueEl(&mqueue,_EVT_hMouse);
- }
- noInput = FALSE;
- }
-
- /* If there was no input available, give up the current timeslice
- * Note: DosSleep(0) will effectively do nothing if no other thread is ready. Hence
- * DosSleep(0) will still use 100% CPU _but_ should not interfere with other programs.
- */
- if (noInput)
- DosSleep(0);
-}
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-****************************************************************************/
-#define _EVT_maskKeyCode(evt)
-
-/****************************************************************************
-REMARKS:
-Keyboard monitor thread. Needed to catch both keyup and keydown events.
-****************************************************************************/
-static void _kbdMonThread(
- void *params)
-{
- APIRET rc;
- KEYPACKET kp;
- USHORT count = sizeof(KEYPACKET);
- MONBUF monInbuf;
- MONBUF monOutbuf;
- int kpNew;
-
- /* Raise thread priority for higher responsiveness */
- DosSetPriority(PRTYS_THREAD, PRTYC_TIMECRITICAL, 0, 0);
- monInbuf.cb = sizeof(monInbuf) - sizeof(monInbuf.cb);
- monOutbuf.cb = sizeof(monOutbuf) - sizeof(monOutbuf.cb);
- bMonRunning = FALSE;
-
- /* Register the buffers to be used for monitoring for current session */
- if (DosMonReg(_EVT_hKbdMon, &monInbuf, (ULONG*)&monOutbuf,MONITOR_END, -1)) {
- DosPostEventSem(hevStart); /* unblock the main thread */
- return;
- }
-
- /* Unblock the main thread and tell it we're OK*/
- bMonRunning = TRUE;
- DosPostEventSem(hevStart);
- while (bMonRunning) { /* Start an endless loop */
- /* Read data from keyboard driver */
- rc = DosMonRead((PBYTE)&monInbuf, IO_WAIT, (PBYTE)&kp, (PUSHORT)&count);
- if (rc) {
-#ifdef CHECKED
- if (bMonRunning)
- printf("Error in DosMonRead, rc = %ld\n", rc);
-#endif
- bMonRunning = FALSE;
- return;
- }
-
- /* Pass FLUSH packets immediately */
- if (kp.MonFlagWord & 4) {
-#ifdef CHECKED
- printf("Flush packet!\n");
-#endif
- DosMonWrite((PBYTE)&monOutbuf, (PBYTE)&kp, count);
- continue;
- }
-
- /*TODO: to be removed */
- /* Skip extended scancodes & some others */
- if (((kp.MonFlagWord >> 8) == 0xE0) || ((kp.KbdDDFlagWord & 0x0F) == 0x0F)) {
- DosMonWrite((PBYTE)&monOutbuf, (PBYTE)&kp, count);
- continue;
- }
-
-/* printf("RawScan = %X, XlatedScan = %X, fbStatus = %X, KbdDDFlags = %X\n", */
-/* kp.MonFlagWord >> 8, kp.XlatedScan, kp.u.ShiftState, kp.KbdDDFlagWord); */
-
- /* Protect access to buffer with mutex semaphore */
- rc = DosRequestMutexSem(hmtxKeyBuf, 1000);
- if (rc) {
-#ifdef CHECKED
- printf("Can't get access to mutex, rc = %ld\n", rc);
-#endif
- bMonRunning = FALSE;
- return;
- }
-
- /* Store packet in circular buffer, drop it if it's full */
- kpNew = kpHead + 1;
- if (kpNew == KEYBUFSIZE)
- kpNew = 0;
- if (kpNew != kpTail) {
- memcpy(&keyMonPkts[kpHead], &kp, sizeof(KEYPACKET));
- /* TODO: fix this! */
- /* Convert break to make code */
- keyMonPkts[kpHead].MonFlagWord &= 0x7FFF;
- kpHead = kpNew;
- }
- DosReleaseMutexSem(hmtxKeyBuf);
-
- /* Finally write the packet */
- rc = DosMonWrite((PBYTE)&monOutbuf, (PBYTE)&kp, count);
- if (rc) {
-#ifdef CHECKED
- if (bMonRunning)
- printf("Error in DosMonWrite, rc = %ld\n", rc);
-#endif
- bMonRunning = FALSE;
- return;
- }
- }
- (void)params;
-}
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort(
- int signal)
-{
- EVT_exit();
- PM_fatalError("Unhandled exception!");
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
- _EVT_mouseMoveHandler mouseMove)
-{
- ushort stat;
-
- /* Initialise the event queue */
- PM_init();
- EVT.mouseMove = mouseMove;
- initEventQueue();
- oldMouseState = 0;
- oldKeyMessage = 0;
- memset(keyUpMsg,0,sizeof(keyUpMsg));
-
- /* Open the mouse driver, and set it up to report events in mickeys */
- MouOpen(NULL,&_EVT_hMouse);
- stat = 0x7F;
- MouSetEventMask(&stat,_EVT_hMouse);
- stat = (MOU_NODRAW | MOU_MICKEYS) << 8;
- MouSetDevStatus(&stat,_EVT_hMouse);
-
- /* Open the keyboard monitor */
- if (DosMonOpen((PSZ)"KBD$", &_EVT_hKbdMon))
- PM_fatalError("Unable to open keyboard monitor!");
-
- /* Create event semaphore, the monitor will post it when it's initalized */
- if (DosCreateEventSem(NULL, &hevStart, 0, FALSE))
- PM_fatalError("Unable to create event semaphore!");
-
- /* Create mutex semaphore protecting the keypacket buffer */
- if (DosCreateMutexSem(NULL, &hmtxKeyBuf, 0, FALSE))
- PM_fatalError("Unable to create mutex semaphore!");
-
- /* Start keyboard monitor thread, use 32K stack */
- kbdMonTID = _beginthread(_kbdMonThread, NULL, 0x8000, NULL);
-
- /* Now block until the monitor thread is up and running */
- /* Give the thread one second */
- DosWaitEventSem(hevStart, 1000);
- if (!bMonRunning) { /* Check the thread is OK */
- DosMonClose(_EVT_hKbdMon);
- PM_fatalError("Keyboard monitor thread didn't initialize!");
- }
-
- /* Catch program termination signals so we can clean up properly */
- signal(SIGABRT, _EVT_abort);
- signal(SIGFPE, _EVT_abort);
- signal(SIGINT, _EVT_abort);
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
- int xRes,
- int yRes)
-{
- rangeX = xRes;
- rangeY = yRes;
-}
-
-/****************************************************************************
-REMARKS
-Modifes the mouse coordinates as necessary if scaling to OS coordinates,
-and sets the OS mouse cursor position.
-****************************************************************************/
-#define _EVT_setMousePos(x,y)
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVT_resume(void)
-{
- /* Do nothing for OS/2 */
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVT_suspend(void)
-{
- /* Do nothing for OS/2 */
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVT_exit(void)
-{
- APIRET rc;
-
- /* Restore signal handlers */
- signal(SIGABRT, SIG_DFL);
- signal(SIGFPE, SIG_DFL);
- signal(SIGINT, SIG_DFL);
-
- /* Close the mouse driver */
- MouClose(_EVT_hMouse);
-
- /* Stop the keyboard monitor thread and close the monitor */
- bMonRunning = FALSE;
- rc = DosKillThread(kbdMonTID);
-#ifdef CHECKED
- if (rc)
- printf("DosKillThread failed, rc = %ld\n", rc);
-#endif
- rc = DosMonClose(_EVT_hKbdMon);
-#ifdef CHECKED
- if (rc) {
- printf("DosMonClose failed, rc = %ld\n", rc);
- }
-#endif
- DosCloseEventSem(hevStart);
- DosCloseMutexSem(hmtxKeyBuf);
- KbdFlushBuffer(0);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2/mon.h b/board/MAI/bios_emulator/scitech/src/pm/os2/mon.h
deleted file mode 100644
index 28d39fba4b..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2/mon.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit OS/2
-*
-* Description: Include file to include all OS/2 keyboard monitor stuff.
-*
-****************************************************************************/
-
-/* Monitors stuff */
-
-#define MONITOR_DEFAULT 0x0000
-#define MONITOR_BEGIN 1
-#define MONITOR_END 2
-
-typedef SHANDLE HMONITOR;
-typedef HMONITOR *PHMONITOR;
-
-typedef struct _KEYPACKET {
- USHORT MonFlagWord;
- UCHAR XlatedChar;
- UCHAR XlatedScan;
- UCHAR DBCSStatus;
- UCHAR DBCSShift;
-
- union
- {
- USHORT ShiftState;
- USHORT LayerIndex;
- } u;
-
- ULONG Milliseconds;
- USHORT KbdDDFlagWord;
-} KEYPACKET;
-
-typedef struct _MLNPACKET {
- USHORT MonFlagWord;
- USHORT IOCTL;
- USHORT CPId;
- USHORT CPIndex;
- ULONG Reserved;
- USHORT KbdDDFlagWord;
-} MLNPACKET;
-
-/* DBCSStatus */
-
-#define SF_SHIFTS 1 /* If set to 1, shift status returned without a character */
-#define SF_NOTCHAR 2 /* 0 - Scan code is a character */
- /* 1 - Scan code is not a character; */
- /* instead it is an extended key code from the keyboard. */
-#define SF_IMMEDIATE 32 /* If set to 1, immediate conversion requested */
-#define SF_TYPEMASK 192 /* Has the following values: */
- /* 00 - Undefined */
- /* 01 - Final character; interim character flag is turned off */
- /* 10 - Interim character */
- /* 11 - Final character; interim character flag is turned on. */
-/* MonFlagWord */
-
-#define MF_OPEN 1 /* open */
-#define MF_CLOSE 2 /* close */
-#define MF_FLUSH 4 /* is flush packet */
-
-/* KbdDDFlagWord */
-
-#define KF_NOTSQPACKET 1024 /* Don't put this packet in SQ buffer */
-#define KF_ACCENTEDKEY 512 /* Key was translated using previous accent. */
-#define KF_MULTIMAKE 256 /* Key was repeated make of a toggle key. */
-#define KF_SECONDARYKEY 128 /* Previous scan code was the E0 prefix code. */
-#define KF_KEYBREAK 64 /* This is the break of the key. */
-#define KF_KEYTYPEMASK 63 /* Isolates the Key Type field of DDFlags. */
-#define KF_UNDEFKEY 63 /* Key packet is undefined */
-#define KF_SYSREQKEY 23 /* This key packet is the SysReq key (4990) */
-#define KF_PRINTFLUSHKEY 22 /* This packet is Ct-Alt-PrtScr */
-#define KF_PSPRINTECHOKEY 21 /* This packet is Ctl-P */
-#define KF_PRINTECHOKEY 20 /* This packet is Ctl-PrtScr */
-#define KF_PRTSCRKEY 19 /* This packet is PrtScr */
-#define KF_PSBREAKKEY 18 /* This packet is Ctl-C */
-#define KF_BREAKKEY 17 /* This packet is Ctl-Break */
-#define KF_ACCENTKEY 16 /* This packet is an accent key */
-#define KF_XRORPNOT 13 /* This packet is a Read or Peek Notification Pct. */
-#define KF_MLNOTIFICATION 14 /* packet is a Multi-Layer NLS packet */
-#define KF_HOTKEYPACKET 12 /* This packet is the hot key. */
-#define KF_BADKEYCOMBO 11 /* Accent/char combo undefined, beep only. */
-#define KF_WAKEUPKEY 10 /* This packet is one following PAUSEKEY */
-#define KF_PSPAUSEKEY 9 /* This packet is Ctl-S */
-#define KF_PAUSEKEY 8 /* This packet is Ctl-Numlock or PAUSE */
-#define KF_SHIFTMASK 7 /* Key is a shift Key */
-#define KF_DUMPKEY 6 /* This packet is Ctl-Numlock-NumLock */
-#define KF_REBOOTKEY 5 /* This packet is Ctl-Alt-Del */
-#define KF_RESENDCODE 4 /* This packet is resend code from controller */
-#define KF_OVERRUNCODE 3 /* This packet is overrun code from controller */
-#define KF_SECPREFIXCODE 2 /* This packet is E0/E1 scan code */
-#define KF_ACKCODE 1 /* This packet is ack code from keyboard */
-
-
-typedef struct _MONBUF {
- USHORT cb;
- KEYPACKET Buffer;
- BYTE Reserved[20];
-} MONBUF;
-
-#define RS_SYSREG 32768 /* Bit 15 SysReq key down */
-#define RS_CAPSLOCK 16384 /* Bit 14 Caps Lock key down */
-#define RS_NUMLOCK 8192 /* Bit 13 NumLock key down */
-#define RS_SCROLLLOCK 4096 /* Bit 12 Scroll Lock key down */
-#define RS_RALT 2048 /* Bit 11 Right Alt key down */
-#define RS_RCONTROL 1024 /* Bit 10 Right Ctrl key down */
-#define RS_LALT 512 /* Bit 9 Left Alt key down */
-#define RS_LCONTROL 256 /* Bit 8 Left Ctrl key down */
-#define RS_INSERT 128 /* Bit 7 Insert on */
-#define RS_CAPS 64 /* Bit 6 Caps Lock on */
-#define RS_NUM 32 /* Bit 5 NumLock on */
-#define RS_SCROLL 16 /* Bit 4 Scroll Lock on */
-#define RS_ALT 8 /* Bit 3 Either Alt key down */
-#define RS_CONTROL 4 /* Bit 2 Either Ctrl key down */
-#define RS_LSHIFT 2 /* Bit 1 Left Shift key down */
-#define RS_RSHIFT 1 /* Bit 0 Right Shift key down */
-
-
-#define CS_RCONTROL 91 /* Right Control */
-#define CS_LSHIFT 42 /* Left Shift */
-#define CS_RSHIFT 54 /* Right Shift */
-#define CS_LALT 56 /* Left Alt */
-#define CS_RALT 94 /* Right Alt */
-
-
-/* DosMon* prototypes */
-#ifdef __EMX__
- #define APIRET16 USHORT
- #define APIENTRY16
-#else
- #define DosMonOpen DOS16MONOPEN
- #define DosMonClose DOS16MONCLOSE
- #define DosMonReg DOS16MONREG
- #define DosMonRead DOS16MONREAD
- #define DosMonWrite DOS16MONWRITE
- #define DosGetInfoSeg DOS16GETINFOSEG
-#endif
-
-APIRET16 APIENTRY16 DosMonOpen (PSZ pszDevName, PHMONITOR phmon);
-APIRET16 APIENTRY16 DosMonClose (HMONITOR hmon);
-APIRET16 APIENTRY16 DosMonReg (HMONITOR hmon, MONBUF *pbInBuf, /*MONBUF*/ULONG *pbOutBuf, USHORT fPosition, USHORT usIndex);
-APIRET16 APIENTRY16 DosMonRead (PBYTE pbInBuf, USHORT fWait, PBYTE pbDataBuf, PUSHORT pcbData);
-APIRET16 APIENTRY16 DosMonWrite (PBYTE pbOutBuf, PBYTE pbDataBuf, USHORT cbData);
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/os2/oshdr.h
deleted file mode 100644
index e7aa1c6764..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2/oshdr.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit OS/2
-*
-* Description: Include file to include all OS specific header files.
-*
-****************************************************************************/
-
-#define INCL_DOSPROFILE
-#define INCL_DOSERRORS
-#define INCL_DOS
-#define INCL_SUB
-#define INCL_VIO
-#define INCL_KBD
-#include <os2.h>
-#include <process.h>
-#include "os2/mon.h"
-
-void __PM_checkConsoleSwitch(void);
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2/pm.c b/board/MAI/bios_emulator/scitech/src/pm/os2/pm.c
deleted file mode 100644
index 756eead1dd..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2/pm.c
+++ /dev/null
@@ -1,2008 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit OS/2
-*
-* Description: Implementation for the OS Portability Manager Library, which
-* contains functions to implement OS specific services in a
-* generic, cross platform API. Porting the OS Portability
-* Manager library is the first step to porting any SciTech
-* products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "pm_help.h"
-#include "mtrr.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <process.h>
-#ifndef __EMX__
-#include <direct.h>
-#endif
-#define INCL_DOSERRORS
-#define INCL_DOS
-#define INCL_SUB
-#define INCL_VIO
-#define INCL_KBD
-#include <os2.h>
-
-/* Semaphore for communication with our background daemon */
-#define SHAREDSEM ((PSZ)"\\SEM32\\SDD\\DAEMON")
-#define DAEMON_NAME "SDDDAEMN.EXE"
-
-/*--------------------------- Global variables ----------------------------*/
-
-/* Public structures used to communicate with VIDEOPMI for implementing
- * the ability to call the real mode BIOS functions.
- */
-
-typedef struct _VIDEOMODEINFO {
- ULONG miModeId;
- USHORT usType;
- USHORT usInt10ModeSet;
- USHORT usXResolution;
- USHORT usYResolution;
- ULONG ulBufferAddress;
- ULONG ulApertureSize;
- BYTE bBitsPerPixel;
- BYTE bBitPlanes;
- BYTE bXCharSize;
- BYTE bYCharSize;
- USHORT usBytesPerScanLine;
- USHORT usTextRows;
- ULONG ulPageLength;
- ULONG ulSaveSize;
- BYTE bVrtRefresh;
- BYTE bHrtRefresh;
- BYTE bVrtPolPos;
- BYTE bHrtPolPos;
- CHAR bRedMaskSize;
- CHAR bRedFieldPosition;
- CHAR bGreenMaskSize;
- CHAR bGreenFieldPosition;
- CHAR bBlueMaskSize;
- CHAR bBlueFieldPosition;
- CHAR bRsvdMaskSize;
- CHAR bRsvdFieldPosition;
- ULONG ulColors;
- ULONG ulReserved[3];
- } VIDEOMODEINFO, FAR *PVIDEOMODEINFO;
-
-typedef struct _ADAPTERINFO {
- ULONG ulAdapterID;
- CHAR szOEMString[128];
- CHAR szDACString[128];
- CHAR szRevision[128];
- ULONG ulTotalMemory;
- ULONG ulMMIOBaseAddress;
- ULONG ulPIOBaseAddress;
- BYTE bBusType;
- BYTE bEndian;
- USHORT usDeviceBusID;
- USHORT usVendorBusID;
- USHORT SlotID;
- } ADAPTERINFO, FAR *PADAPTERINFO;
-
-typedef struct _VIDEO_ADAPTER {
- void *hvideo;
- ADAPTERINFO Adapter;
- VIDEOMODEINFO ModeInfo;
- } VIDEO_ADAPTER, FAR *PVIDEO_ADAPTER;
-
-/* PMIREQUEST_SOFTWAREINT structures from OS/2 DDK */
-
-typedef struct {
- ULONG ulFlags; /* VDM initialization type */
-#define VDM_POSTLOAD 0x1 /* adapter just loaded, used internally for initialization */
-#define VDM_INITIALIZE 0x2 /* force initialization of a permanently open VDM, even if previously initialized */
-#define VDM_TERMINATE_POSTINITIALIZE 0x6 /*start VDM with initialization, but close it afterwards (includes VDM_INITIALIZE) */
-#define VDM_QUERY_CAPABILITY 0x10 /* query the current int 10 capability */
-#define VDM_FULL_VDM_CREATED 0x20 /* a full VDM is created */
-#define VDM_MINI_VDM_CREATED 0x40 /* a mini VDM is created */
-#define VDM_MINI_VDM_SUPPORTED 0x80 /* mini VDM support is available */
- PCHAR szName; /* VDM initialization program */
- PCHAR szArgs; /* VDM initialization arguments */
- }INITVDM;
-
-typedef struct {
- BYTE bBufferType;
-#define BUFFER_NONE 0
-#define INPUT_BUFFER 1
-#define OUTPUT_BUFFER 2
- BYTE bReserved;
- BYTE bSelCRF;
- BYTE bOffCRF;
- PVOID pAddress;
- ULONG ulSize;
- } BUFFER, *PBUFFER;
-
-typedef struct vcrf_s {
- ULONG reg_eax;
- ULONG reg_ebx;
- ULONG reg_ecx;
- ULONG reg_edx;
- ULONG reg_ebp;
- ULONG reg_esi;
- ULONG reg_edi;
- ULONG reg_ds;
- ULONG reg_es;
- ULONG reg_fs;
- ULONG reg_gs;
- ULONG reg_cs;
- ULONG reg_eip;
- ULONG reg_eflag;
- ULONG reg_ss;
- ULONG reg_esp;
- } VCRF;
-
-typedef struct {
- ULONG ulBIOSIntNo;
- VCRF aCRF;
- BUFFER pB[2];
- } INTCRF;
-
-#define PMIREQUEST_LOADPMIFILE 21
-#define PMIREQUEST_IDENTIFYADAPTER 22
-#define PMIREQUEST_SOFTWAREINT 23
-
-#ifdef PTR_DECL_IN_FRONT
-#define EXPENTRYP * EXPENTRY
-#else
-#define EXPENTRYP EXPENTRY *
-#endif
-
-/* Entry point to VIDEOPMI32Request. This may be overridden by external
- * code that has already loaded VIDEOPMI to avoid loading it twice.
- */
-
-APIRET (EXPENTRYP PM_VIDEOPMI32Request)(PVIDEO_ADAPTER, ULONG, PVOID, PVOID) = NULL;
-static ibool haveInt10 = -1; /* True if we have Int 10 support */
-static ibool useVPMI = true; /* False if VIDEOPMI unavailable */
-static VIDEO_ADAPTER Adapter; /* Video adapter for VIDEOPMI */
-static uchar RMBuf[1024]; /* Fake real mode transfer buffer */
-static uint VESABuf_len = 1024;/* Length of the VESABuf buffer */
-static void *VESABuf_ptr = NULL;/* Near pointer to VESABuf */
-static uint VESABuf_rseg; /* Real mode segment of VESABuf */
-static uint VESABuf_roff; /* Real mode offset of VESABuf */
-static uchar * lowMem = NULL;
-static ibool isSessionSwitching = false;
-static ulong parmsIn[4]; /* Must not cross 64Kb boundary! */
-static ulong parmsOut[4]; /* Must not cross 64Kb boundary! */
-extern ushort _PM_gdt;
-static void (PMAPIP fatalErrorCleanup)(void) = NULL;
-
-/* DosSysCtl prototype. It is not declared in the headers but it is in the
- * standard import libraries (DOSCALLS.876). Funny.
- */
-APIRET APIENTRY DosSysCtl(ULONG ulFunction, PVOID pvData);
-
-/* This is the stack size for the threads that track the session switch event */
-#define SESSION_SWITCH_STACK_SIZE 32768
-
-typedef struct {
- VIOMODEINFO vmi;
- USHORT CursorX;
- USHORT CursorY;
- UCHAR FrameBuffer[1];
- } CONSOLE_SAVE;
-
-typedef struct _SESWITCHREC {
- /* The following variable is volatile because of PM_SUSPEND_APP */
- volatile int Flags; /* -1 or PM_DEACTIVATE or PM_REACTIVATE */
- PM_saveState_cb Callback; /* Save/restore context callback */
- HMTX Mutex; /* Exclusive access mutex */
- HEV Event; /* Posted after callback is called */
- } SESWITCHREC;
-
-/* Page sized block cache */
-
-#define PAGES_PER_BLOCK 32
-#define PAGE_BLOCK_SIZE (PAGES_PER_BLOCK * PM_PAGE_SIZE + (PM_PAGE_SIZE-1) + sizeof(pageblock))
-#define FREELIST_NEXT(p) (*(void**)(p))
-typedef struct pageblock {
- struct pageblock *next;
- struct pageblock *prev;
- void *freeListStart;
- void *freeList;
- void *freeListEnd;
- int freeCount;
- PM_lockHandle lockHandle;
- } pageblock;
-
-static pageblock *pageBlocks = NULL;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-func - Helper device driver function to call
-
-RETURNS:
-First return value from the device driver in parmsOut[0]
-
-REMARKS:
-Function to open our helper device driver, call it and close the file
-handle. Note that we have to open the device driver for every call because
-of two problems:
-
- 1. We cannot open a single file handle in a DLL that is shared amongst
- programs, since every process must have it's own open file handle.
-
- 2. For some reason there appears to be a limit of about 12 open file
- handles on a device driver in the system. Hence when we open more
- than about 12 file handles things start to go very strange.
-
-Hence we simply open the file handle every time that we need to call the
-device driver to work around these problems.
-****************************************************************************/
-static ulong CallSDDHelp(
- int func)
-{
- static ulong inLen; /* Must not cross 64Kb boundary! */
- static ulong outLen; /* Must not cross 64Kb boundary! */
- HFILE hSDDHelp;
- ULONG rc;
- ulong result;
-
- if ((rc = DosOpen(PMHELP_NAME,&hSDDHelp,&result,0,0,
- FILE_OPEN, OPEN_SHARE_DENYNONE | OPEN_ACCESS_READWRITE,
- NULL)) != 0) {
- if (rc == 4) { /* Did we run out of file handles? */
- ULONG ulNewFHs;
- LONG lAddFHs = 5;
-
- if (DosSetRelMaxFH(&lAddFHs, &ulNewFHs) != 0)
- PM_fatalError("Failed to raise the file handles limit!");
- else {
- if ((rc = DosOpen(PMHELP_NAME,&hSDDHelp,&result,0,0,
- FILE_OPEN, OPEN_SHARE_DENYNONE | OPEN_ACCESS_READWRITE,
- NULL)) != 0) {
- PM_fatalError("Unable to open SDDHELP$ helper device driver! (#2)");
- }
- }
- }
- else
- PM_fatalError("Unable to open SDDHELP$ helper device driver!");
- }
- if (DosDevIOCtl(hSDDHelp,PMHELP_IOCTL,func,
- &parmsIn, inLen = sizeof(parmsIn), &inLen,
- &parmsOut, outLen = sizeof(parmsOut), &outLen) != 0)
- PM_fatalError("Failure calling SDDHELP$ helper device driver!");
- DosClose(hSDDHelp);
- return parmsOut[0];
-}
-
-/****************************************************************************
-REMARKS:
-Determine if we're running on a DBCS system.
-****************************************************************************/
-ibool __IsDBCSSystem(void)
-{
- CHAR achDBCSInfo[12];
- COUNTRYCODE ccStruct = {0, 0};
-
- memset(achDBCSInfo, 0, 12);
-
- /* Get the DBCS vector - if it's not empty, we're on DBCS */
- DosQueryDBCSEnv(sizeof(achDBCSInfo), &ccStruct, achDBCSInfo);
- if (achDBCSInfo[0] != 0)
- return true;
- else
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Determine if PMSHELL is running - if it isn't, we can't use certain calls
-****************************************************************************/
-ibool __isShellLoaded(void)
-{
- PVOID ptr;
-
- if (DosGetNamedSharedMem(&ptr, (PSZ)"\\SHAREMEM\\PMGLOBAL.MEM", PAG_READ) == NO_ERROR) {
- DosFreeMem(ptr);
- return true;
- }
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Initialise the PM library and connect to our helper device driver. If we
-cannot connect to our helper device driver, we bail out with an error
-message.
-****************************************************************************/
-void PMAPI PM_init(void)
-{
- if (!lowMem) {
- /* Obtain the 32->16 callgate from the device driver to enable IOPL */
- if ((_PM_gdt = CallSDDHelp(PMHELP_GETGDT32)) == 0)
- PM_fatalError("Unable to obtain call gate selector!");
-
- PM_setIOPL(3);
-
- /* Map the first Mb of physical memory into lowMem */
- if ((lowMem = PM_mapPhysicalAddr(0,0xFFFFF,true)) == NULL)
- PM_fatalError("Unable to map first Mb physical memory!");
-
- /* Initialise the MTRR interface functions */
- MTRR_init();
- }
-}
-
-/****************************************************************************
-REMARKS:
-Initialise the PM library for BIOS access via VIDEOPMI. This should work
-with any GRADD driver, including SDD/2.
-****************************************************************************/
-static ibool InitInt10(void)
-{
- HMODULE hModGENPMI,hModSDDPMI,hModVideoPMI;
- CHAR buf[80],path[_MAX_PATH];
- HEV hevDaemon = NULLHANDLE;
- RESULTCODES resCodes;
-
- if (haveInt10 == -1) {
- /* Connect to VIDEOPMI and get entry point. Note that we only
- * do this if GENPMI or SDDPMI are already loaded, since we need
- * a GRADD based driver for this to work.
- */
- PM_init();
- haveInt10 = false;
- if (DosQueryModuleHandle((PSZ)"GENPMI.DLL",&hModGENPMI) != 0)
- hModGENPMI = NULLHANDLE;
- if (DosQueryModuleHandle((PSZ)"SDDPMI.DLL",&hModSDDPMI) != 0)
- hModSDDPMI = NULLHANDLE;
- if (hModGENPMI || hModSDDPMI) {
- if (DosLoadModule((PSZ)buf,sizeof(buf),(PSZ)"VIDEOPMI.DLL",&hModVideoPMI) == 0) {
- if (DosQueryProcAddr(hModVideoPMI,0,(PSZ)"VIDEOPMI32Request",(void*)&PM_VIDEOPMI32Request) != 0)
- PM_fatalError("Unable to get VIDEOPMI32Request entry point!");
- strcpy(path,"X:\\OS2\\SVGADATA.PMI");
- path[0] = PM_getBootDrive();
- if (PM_VIDEOPMI32Request(&Adapter,PMIREQUEST_LOADPMIFILE,path,NULL) != 0) {
- DosFreeModule(hModVideoPMI);
- PM_VIDEOPMI32Request = NULL;
- haveInt10 = false;
- }
- else {
- /* Attempt to initialise the full VDM in the system. This will only
- * work if VPRPMI.SYS is loaded, but it provides support for passing
- * values in ES/DS/ESI/EDI between the BIOS which does not work with
- * kernel VDM's in fixpacks earlier than FP15. FP15 and later and
- * the new Warp 4.51 and Warp Server convenience packs should work
- * fine with the kernel mini-VDM.
- *
- * Also the full VDM is the only solution for really old kernels
- * (but GRADD won't run on them so this is superfluous ;-).
- */
- INITVDM InitVDM = {VDM_INITIALIZE,NULL,NULL};
- PM_VIDEOPMI32Request(&Adapter,PMIREQUEST_SOFTWAREINT,&InitVDM,NULL);
- haveInt10 = true;
- }
- }
- }
- else {
- /* A GRADD driver isn't loaded, hence we can't use VIDEOPMI. But we will try
- * to access the mini-VDM directly, first verifying that the support is
- * available in the kernel (it should be for kernels that support GRADD).
- * This may be needed in a command line boot or if non-GRADD driver is
- * used (Matrox or classic VGA).
- * Note: because of problems with mini-VDM support in the kernel, we have to
- * spawn a daemon process that will do the actual mini-VDM access for us.
- */
- /* Try to open shared semaphore to see if our daemon is already up */
- if (DosOpenEventSem(SHAREDSEM, &hevDaemon) == NO_ERROR) {
- if (DosWaitEventSem(hevDaemon, 1) == NO_ERROR) {
- /* If semaphore is posted, all is well */
- useVPMI = false;
- haveInt10 = true;
- }
- }
- else {
- /* Create shared event semaphore */
- if (DosCreateEventSem(SHAREDSEM, &hevDaemon, DC_SEM_SHARED, FALSE) == NO_ERROR) {
- PM_findBPD(DAEMON_NAME, path);
- strcat(path, DAEMON_NAME);
- if (DosExecPgm(buf, sizeof(buf), EXEC_BACKGROUND, (PSZ)DAEMON_NAME,
- NULL, &resCodes, (PSZ)path) == NO_ERROR) {
- /* The daemon was successfully spawned, now give it a sec to come up */
- if (DosWaitEventSem(hevDaemon, 2000) == NO_ERROR) {
- /* It's up! */
- useVPMI = false;
- haveInt10 = true;
- }
- }
- }
- }
- }
- }
- return haveInt10;
-}
-
-/****************************************************************************
-REMARKS:
-We "probably" have BIOS access under OS/2 but we have to verify/initialize it
-first.
-****************************************************************************/
-ibool PMAPI PM_haveBIOSAccess(void)
-{
- return InitInt10();
-}
-
-/****************************************************************************
-REMARKS:
-Return the operating system type identifier.
-****************************************************************************/
-long PMAPI PM_getOSType(void)
-{
- return _OS_OS2;
-}
-
-/****************************************************************************
-REMARKS:
-Return the runtime type identifier.
-****************************************************************************/
-int PMAPI PM_getModeType(void)
-{
- return PM_386;
-}
-
-/****************************************************************************
-REMARKS:
-Add a file directory separator to the end of the filename.
-****************************************************************************/
-void PMAPI PM_backslash(
- char *s)
-{
- uint pos = strlen(s);
- if (s[pos-1] != '\\') {
- s[pos] = '\\';
- s[pos+1] = '\0';
- }
-}
-
-/****************************************************************************
-REMARKS:
-Add a user defined PM_fatalError cleanup function.
-****************************************************************************/
-void PMAPI PM_setFatalErrorCleanup(
- void (PMAPIP cleanup)(void))
-{
- fatalErrorCleanup = cleanup;
-}
-
-/****************************************************************************
-REMARKS:
-Report a fatal error condition and halt the program.
-****************************************************************************/
-void PMAPI PM_fatalError(
- const char *msg)
-{
- /* Be prepare to be called recursively (failed to fail situation :-) */
- static int fatalErrorCount = 0;
- if (fatalErrorCount++ == 0) {
- if (fatalErrorCleanup)
- fatalErrorCleanup();
- }
- fprintf(stderr,"%s\n", msg);
- exit(1);
-}
-
-/****************************************************************************
-REMARKS:
-Allocate the real mode VESA transfer buffer for communicating with the BIOS.
-****************************************************************************/
-void * PMAPI PM_getVESABuf(
- uint *len,
- uint *rseg,
- uint *roff)
-{
- if (!VESABuf_ptr) {
- /* Allocate a global buffer for communicating with the VESA VBE */
- if ((VESABuf_ptr = PM_allocRealSeg(VESABuf_len, &VESABuf_rseg, &VESABuf_roff)) == NULL)
- return NULL;
- }
- *len = VESABuf_len;
- *rseg = VESABuf_rseg;
- *roff = VESABuf_roff;
- return VESABuf_ptr;
-}
-
-/****************************************************************************
-REMARKS:
-Check if a key has been pressed.
-****************************************************************************/
-int PMAPI PM_kbhit(void)
-{
- KBDKEYINFO key; /* Must not cross a 64K boundary */
-
- KbdPeek(&key, 0);
- return (key.fbStatus & KBDTRF_FINAL_CHAR_IN);
-}
-
-/****************************************************************************
-REMARKS:
-Wait for and return the next keypress.
-****************************************************************************/
-int PMAPI PM_getch(void)
-{
- KBDKEYINFO key; /* Must not cross a 64K boundary */
-
- KbdCharIn(&key,IO_WAIT,0);
- return key.chChar;
-}
-
-/****************************************************************************
-REMARKS:
-Open a fullscreen console for output to the screen. This requires that
-the application be a fullscreen VIO program.
-****************************************************************************/
-PM_HWND PMAPI PM_openConsole(
- PM_HWND hwndUser,
- int device,
- int xRes,
- int yRes,
- int bpp,
- ibool fullScreen)
-{
- (void)hwndUser;
- (void)device;
- (void)xRes;
- (void)yRes;
- (void)bpp;
- (void)fullScreen;
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Find the size of the console state buffer.
-****************************************************************************/
-int PMAPI PM_getConsoleStateSize(void)
-{
- VIOMODEINFO vmi;
- vmi.cb = sizeof (VIOMODEINFO);
- VioGetMode (&vmi, (HVIO)0);
- return sizeof (CONSOLE_SAVE) - 1 + vmi.col * vmi.row * 2;
-}
-
-/****************************************************************************
-REMARKS:
-Save the state of the console.
-****************************************************************************/
-void PMAPI PM_saveConsoleState(
- void *stateBuf,
- PM_HWND hwndConsole)
-{
- USHORT fblen;
- CONSOLE_SAVE *cs = (CONSOLE_SAVE*)stateBuf;
- VIOMODEINFO vmi;
-
- /* The reason for the VIOMODEINFO juggling is 16-bit code. Because the user
- * allocates the state buffer, cd->vmi might be crossing the 64K boundary and
- * the 16-bit API would fail. If we create another copy on stack, the compiler
- * should ensure that the 64K boundary will not be crossed (it adjusts the stack
- * if it should cross).
- */
- vmi.cb = sizeof(VIOMODEINFO);
- VioGetMode(&vmi,(HVIO)0);
- memcpy(&cs->vmi, &vmi, sizeof(VIOMODEINFO));
- VioGetCurPos(&cs->CursorY, &cs->CursorX, (HVIO)0);
- fblen = cs->vmi.col * cs->vmi.row * 2;
- VioReadCellStr((PCH)cs->FrameBuffer, &fblen, 0, 0, (HVIO)0);
-}
-
-/* Global variable to communicate between threads */
-static SESWITCHREC SesSwitchRec = { -1 };
-
-/****************************************************************************
-REMARKS:
-Called by external routines at least once per frame to check whenever a
-session save/restore should be performed. Since we receive such notifications
-asyncronously, we can't perform all required operations at that time.
-****************************************************************************/
-void __PM_checkConsoleSwitch(void)
-{
- int Flags, Mode;
- PM_saveState_cb Callback;
-
- /* Quick optimized path for most common case */
- if (SesSwitchRec.Flags == -1)
- return;
-
-again:
- if (DosRequestMutexSem(SesSwitchRec.Mutex, 100))
- return;
- Flags = SesSwitchRec.Flags;
- Callback = SesSwitchRec.Callback;
- SesSwitchRec.Flags = -1;
- DosReleaseMutexSem(SesSwitchRec.Mutex);
-
- isSessionSwitching = true; /* Prevent VIO calls */
- Mode = Callback(Flags);
- isSessionSwitching = false;
- DosPostEventSem(SesSwitchRec.Event);
- if (Flags == PM_DEACTIVATE && Mode == PM_SUSPEND_APP)
- /* Suspend application until we switch back to our application */
- for (;;) {
- DosSleep (500);
- /* SesSwitchRec.Flags is volatile so optimizer
- * won't load it into a register
- */
- if (SesSwitchRec.Flags != -1)
- goto again;
- }
-}
-
-/****************************************************************************
-REMARKS:
-Waits until main thread processes the session switch event.
-****************************************************************************/
-static void _PM_SessionSwitchEvent(
- PM_saveState_cb saveState,
- int flags)
-{
- ULONG Count;
-
- if (DosRequestMutexSem(SesSwitchRec.Mutex, 10000))
- return;
-
- /* We're going to wait on that semaphore */
- DosResetEventSem(SesSwitchRec.Event, &Count);
- SesSwitchRec.Callback = saveState;
- SesSwitchRec.Flags = flags;
- DosReleaseMutexSem(SesSwitchRec.Mutex);
-
- /* Now wait until all required operations are complete */
- DosWaitEventSem (SesSwitchRec.Event, 10000);
-}
-
-/****************************************************************************
-REMARKS:
-This is the thread responsible for tracking switches back to our
-fullscreen session.
-****************************************************************************/
-static void _PM_ConsoleSwitch(
- PM_saveState_cb saveState)
-{
- USHORT NotifyType;
-
- for (;;) {
- if (VioModeWait(VMWR_POPUP, &NotifyType, 0) != 0)
- break;
- _PM_SessionSwitchEvent(saveState, PM_REACTIVATE);
- }
- VioModeUndo(UNDOI_RELEASEOWNER, UNDOK_ERRORCODE, (HVIO)0);
-}
-
-/****************************************************************************
-REMARKS:
-This is the thread responsible for tracking screen popups (usually fatal
-error handler uses them).
-****************************************************************************/
-static void _PM_ConsolePopup(
- PM_saveState_cb saveState)
-{
- USHORT NotifyType;
- for (;;) {
- if (VioSavRedrawWait(VSRWI_SAVEANDREDRAW, &NotifyType, 0) != 0)
- break;
- if (NotifyType == VSRWN_SAVE)
- _PM_SessionSwitchEvent(saveState, PM_DEACTIVATE);
- else if (NotifyType == VSRWN_REDRAW)
- _PM_SessionSwitchEvent(saveState, PM_REACTIVATE);
- }
- VioSavRedrawUndo(UNDOI_RELEASEOWNER, UNDOK_ERRORCODE, (HVIO)0);
-}
-
-/****************************************************************************
-REMARKS:
-Set the suspend application callback for the fullscreen console.
-****************************************************************************/
-void PMAPI PM_setSuspendAppCallback(
- PM_saveState_cb saveState)
-{
- /* If PM isn't loaded, this stuff will cause crashes! */
- if (__isShellLoaded()) {
- if (saveState) {
- /* Create the threads responsible for tracking console switches */
- SesSwitchRec.Flags = -1;
- DosCreateMutexSem(NULL, &SesSwitchRec.Mutex, 0, FALSE);
- DosCreateEventSem(NULL, &SesSwitchRec.Event, 0, FALSE);
- _beginthread ((void(*)(void*))_PM_ConsoleSwitch,NULL,SESSION_SWITCH_STACK_SIZE, (void*)saveState);
- _beginthread ((void(*)(void*))_PM_ConsolePopup,NULL,SESSION_SWITCH_STACK_SIZE, (void*)saveState);
- }
- else {
- /* Kill the threads responsible for tracking console switches */
- VioModeUndo(UNDOI_RELEASEOWNER, UNDOK_TERMINATE, (HVIO)0);
- VioSavRedrawUndo(UNDOI_RELEASEOWNER, UNDOK_TERMINATE, (HVIO)0);
- DosCloseEventSem(SesSwitchRec.Event);
- DosCloseMutexSem(SesSwitchRec.Mutex);
- }
- }
-}
-
-/****************************************************************************
-REMARKS:
-Restore the console state.
-****************************************************************************/
-void PMAPI PM_restoreConsoleState(
- const void *stateBuf,
- PM_HWND hwndConsole)
-{
- CONSOLE_SAVE *cs = (CONSOLE_SAVE *)stateBuf;
- VIOMODEINFO vmi;
-
- if (!cs)
- return;
-
- memcpy(&vmi, &cs->vmi, sizeof (VIOMODEINFO));
- VioSetMode(&vmi, (HVIO)0);
- VioSetCurPos(cs->CursorY, cs->CursorX, (HVIO)0);
- VioWrtCellStr((PCH)cs->FrameBuffer, cs->vmi.col * cs->vmi.row * 2,0, 0, (HVIO)0);
-}
-
-/****************************************************************************
-REMARKS:
-Close the fullscreen console.
-****************************************************************************/
-void PMAPI PM_closeConsole(
- PM_HWND hwndConsole)
-{
- /* Kill the threads responsible for tracking console switches */
- PM_setSuspendAppCallback(NULL);
- (void)hwndConsole;
-}
-
-/****************************************************************************
-REMARKS:
-Set the location of the OS console cursor.
-****************************************************************************/
-void PM_setOSCursorLocation(
- int x,
- int y)
-{
- /* If session switch is in progress, calling into VIO causes deadlocks! */
- /* Also this call to VIO screws up our console library on DBCS boxes... */
- if (!isSessionSwitching && !__IsDBCSSystem())
- VioSetCurPos(y,x,0);
-}
-
-/****************************************************************************
-REMARKS:
-Set the width of the OS console.
-****************************************************************************/
-void PM_setOSScreenWidth(
- int width,
- int height)
-{
- /* Nothing to do in here */
- (void)width;
- (void)height;
-}
-
-/****************************************************************************
-REMARKS:
-Set the real time clock handler (used for software stereo modes).
-****************************************************************************/
-ibool PMAPI PM_setRealTimeClockHandler(
- PM_intHandler ih,
- int frequency)
-{
- /* TODO: Implement this! */
- (void)ih;
- (void)frequency;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Set the real time clock frequency (for stereo modes).
-****************************************************************************/
-void PMAPI PM_setRealTimeClockFrequency(
- int frequency)
-{
- /* TODO: Implement this! */
- (void)frequency;
-}
-
-/****************************************************************************
-REMARKS:
-Restore the original real time clock handler.
-****************************************************************************/
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
- /* TODO: Implement this! */
-}
-
-/****************************************************************************
-REMARKS:
-Return the current operating system path or working directory.
-****************************************************************************/
-char * PMAPI PM_getCurrentPath(
- char *path,
- int maxLen)
-{
- return getcwd(path,maxLen);
-}
-
-/****************************************************************************
-REMARKS:
-Return the drive letter for the boot drive.
-****************************************************************************/
-char PMAPI PM_getBootDrive(void)
-{
- ulong boot = 3;
- DosQuerySysInfo(QSV_BOOT_DRIVE,QSV_BOOT_DRIVE,&boot,sizeof(boot));
- return (char)('a' + boot - 1);
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the VBE/AF driver files.
-****************************************************************************/
-const char * PMAPI PM_getVBEAFPath(void)
-{
- static char path[CCHMAXPATH];
- strcpy(path,"x:\\");
- path[0] = PM_getBootDrive();
- return path;
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the Nucleus driver files.
-****************************************************************************/
-const char * PMAPI PM_getNucleusPath(void)
-{
- static char path[CCHMAXPATH];
- if (getenv("NUCLEUS_PATH") != NULL)
- return getenv("NUCLEUS_PATH");
- strcpy(path,"x:\\os2\\drivers");
- path[0] = PM_getBootDrive();
- PM_backslash(path);
- strcat(path,"nucleus");
- return path;
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the Nucleus configuration files.
-****************************************************************************/
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
- static char path[CCHMAXPATH];
- strcpy(path,PM_getNucleusPath());
- PM_backslash(path);
- strcat(path,"config");
- return path;
-}
-
-/****************************************************************************
-REMARKS:
-Return a unique identifier for the machine if possible.
-****************************************************************************/
-const char * PMAPI PM_getUniqueID(void)
-{
- return PM_getMachineName();
-}
-
-/****************************************************************************
-REMARKS:
-Get the name of the machine on the network.
-****************************************************************************/
-const char * PMAPI PM_getMachineName(void)
-{
- static char name[40],*env;
-
- if ((env = getenv("HOSTNAME")) != NULL) {
- strncpy(name,env,sizeof(name));
- name[sizeof(name)-1] = 0;
- return name;
- }
- return "OS2";
-}
-
-/****************************************************************************
-REMARKS:
-Return a pointer to the real mode BIOS data area.
-****************************************************************************/
-void * PMAPI PM_getBIOSPointer(void)
-{
- PM_init();
- return lowMem + 0x400;
-}
-
-/****************************************************************************
-REMARKS:
-Return a pointer to 0xA0000 physical VGA graphics framebuffer.
-****************************************************************************/
-void * PMAPI PM_getA0000Pointer(void)
-{
- PM_init();
- return lowMem + 0xA0000;
-}
-
-/****************************************************************************
-REMARKS:
-Map a physical address to a linear address in the callers process.
-****************************************************************************/
-void * PMAPI PM_mapPhysicalAddr(
- ulong base,
- ulong limit,
- ibool isCached)
-{
- ulong baseAddr,baseOfs,linear;
-
- /* Round the physical address to a 4Kb boundary and the limit to a
- * 4Kb-1 boundary before passing the values to mmap. If we round the
- * physical address, then we also add an extra offset into the address
- * that we return.
- */
- baseOfs = base & 4095;
- baseAddr = base & ~4095;
- limit = ((limit+baseOfs+1+4095) & ~4095)-1;
- parmsIn[0] = baseAddr;
- parmsIn[1] = limit;
- parmsIn[2] = isCached;
- if ((linear = CallSDDHelp(PMHELP_MAPPHYS)) == 0)
- return NULL;
- return (void*)(linear + baseOfs);
-}
-
-/****************************************************************************
-REMARKS:
-Free a physical address mapping allocated by PM_mapPhysicalAddr.
-****************************************************************************/
-void PMAPI PM_freePhysicalAddr(
- void *ptr,
- ulong limit)
-{
- parmsIn[0] = (ulong)ptr;
- parmsIn[1] = limit;
- CallSDDHelp(PMHELP_FREEPHYS);
-}
-
-/****************************************************************************
-REMARKS:
-Find the physical address of a linear memory address in current process.
-****************************************************************************/
-ulong PMAPI PM_getPhysicalAddr(
- void *p)
-{
- parmsIn[0] = (ulong)p;
- return CallSDDHelp(PMHELP_GETPHYSICALADDR);
-}
-
-/****************************************************************************
-REMARKS:
-Find the physical address of a linear memory address in current process.
-****************************************************************************/
-ibool PMAPI PM_getPhysicalAddrRange(
- void *p,
- ulong length,
- ulong *physAddress)
-{
- parmsIn[0] = (ulong)p;
- parmsIn[1] = (ulong)length;
- parmsIn[2] = (ulong)physAddress;
- return CallSDDHelp(PMHELP_GETPHYSICALADDRRANGE);
-}
-
-/****************************************************************************
-REMARKS:
-Sleep for the specified number of milliseconds.
-****************************************************************************/
-void PMAPI PM_sleep(
- ulong milliseconds)
-{
- DosSleep(milliseconds);
-}
-
-/****************************************************************************
-REMARKS:
-Return the base I/O port for the specified COM port.
-****************************************************************************/
-int PMAPI PM_getCOMPort(
- int port)
-{
- switch (port) {
- case 0: return 0x3F8;
- case 1: return 0x2F8;
- }
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Return the base I/O port for the specified LPT port.
-****************************************************************************/
-int PMAPI PM_getLPTPort(
- int port)
-{
- switch (port) {
- case 0: return 0x3BC;
- case 1: return 0x378;
- case 2: return 0x278;
- }
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of shared memory. For Win9x we allocate shared memory
-as locked, global memory that is accessible from any memory context
-(including interrupt time context), which allows us to load our important
-data structure and code such that we can access it directly from a ring
-0 interrupt context.
-****************************************************************************/
-void * PMAPI PM_mallocShared(
- long size)
-{
- parmsIn[0] = size;
- return (void*)CallSDDHelp(PMHELP_MALLOCSHARED);
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of shared memory.
-****************************************************************************/
-void PMAPI PM_freeShared(
- void *ptr)
-{
- parmsIn[0] = (ulong)ptr;
- CallSDDHelp(PMHELP_FREESHARED);
-}
-
-/****************************************************************************
-REMARKS:
-Map a linear memory address to the calling process address space. The
-address will have been allocated in another process using the
-PM_mapPhysicalAddr function.
-****************************************************************************/
-void * PMAPI PM_mapToProcess(
- void *base,
- ulong limit)
-{
- ulong baseAddr,baseOfs;
-
- /* Round the physical address to a 4Kb boundary and the limit to a
- * 4Kb-1 boundary before passing the values to mmap. If we round the
- * physical address, then we also add an extra offset into the address
- * that we return.
- */
- baseOfs = (ulong)base & 4095;
- baseAddr = (ulong)base & ~4095;
- limit = ((limit+baseOfs+1+4095) & ~4095)-1;
- parmsIn[0] = (ulong)baseAddr;
- parmsIn[1] = limit;
- return (void*)(CallSDDHelp(PMHELP_MAPTOPROCESS)+baseOfs);
-}
-
-/****************************************************************************
-REMARKS:
-Map a real mode pointer to a protected mode pointer.
-****************************************************************************/
-void * PMAPI PM_mapRealPointer(
- uint r_seg,
- uint r_off)
-{
- if (r_seg == 0xFFFF)
- return &RMBuf[r_off];
- return lowMem + MK_PHYS(r_seg,r_off);
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of real mode memory
-****************************************************************************/
-void * PMAPI PM_allocRealSeg(
- uint size,
- uint *r_seg,
- uint *r_off)
-{
- if (size > sizeof(RMBuf))
- return NULL;
- *r_seg = 0xFFFF;
- *r_off = 0x0000;
- return &RMBuf;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of real mode memory.
-****************************************************************************/
-void PMAPI PM_freeRealSeg(
- void *mem)
-{
- /* Nothing to do in here */
- (void)mem;
-}
-
-#define INDPMI(reg) rmregs.aCRF.reg_##reg = regs->reg
-#define OUTDPMI(reg) regs->reg = rmregs.aCRF.reg_##reg
-
-#define REG_OFFSET(field) (((ULONG)&(((VCRF*)0)->field)) / sizeof(ULONG))
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt (parameters in DPMI compatible structure)
-****************************************************************************/
-void PMAPI DPMI_int86(
- int intno,
- DPMI_regs *regs)
-{
- INTCRF rmregs;
- ulong eax = 0;
-
- if (!InitInt10())
- return;
- memset(&rmregs, 0, sizeof(rmregs));
- rmregs.ulBIOSIntNo = intno;
- INDPMI(eax); INDPMI(ebx); INDPMI(ecx); INDPMI(edx); INDPMI(esi); INDPMI(edi);
- rmregs.aCRF.reg_ds = regs->ds;
- rmregs.aCRF.reg_es = regs->es;
- if (intno == 0x10) {
- eax = rmregs.aCRF.reg_eax;
- switch (eax & 0xFFFF) {
- case 0x4F00:
- /* We have to hack the way this function works, due to
- * some bugs in the IBM mini-VDM BIOS support. Specifically
- * we need to make the input buffer and output buffer the
- * 'same' buffer, and that ES:SI points to the output
- * buffer (ignored by the BIOS). The data will end up
- * being returned in the input buffer, except for the
- * first four bytes ('VESA') that will not be returned.
- */
- rmregs.pB[0].bBufferType = INPUT_BUFFER;
- rmregs.pB[0].bSelCRF = REG_OFFSET(reg_es);
- rmregs.pB[0].bOffCRF = REG_OFFSET(reg_edi);
- rmregs.pB[0].pAddress = RMBuf;
- rmregs.pB[0].ulSize = 4;
- rmregs.pB[1].bBufferType = OUTPUT_BUFFER;
- rmregs.pB[1].bSelCRF = REG_OFFSET(reg_es);
- rmregs.pB[1].bOffCRF = REG_OFFSET(reg_esi);
- rmregs.pB[1].pAddress = ((PBYTE)RMBuf)+4;
- rmregs.pB[1].ulSize = 512-4;
- break;
- case 0x4F01:
- rmregs.pB[0].bBufferType = OUTPUT_BUFFER;
- rmregs.pB[0].bSelCRF = REG_OFFSET(reg_es);
- rmregs.pB[0].bOffCRF = REG_OFFSET(reg_edi);
- rmregs.pB[0].pAddress = RMBuf;
- rmregs.pB[0].ulSize = 256;
- break;
- case 0x4F02:
- rmregs.pB[0].bBufferType = INPUT_BUFFER;
- rmregs.pB[0].bSelCRF = REG_OFFSET(reg_es);
- rmregs.pB[0].bOffCRF = REG_OFFSET(reg_edi);
- rmregs.pB[0].pAddress = RMBuf;
- rmregs.pB[0].ulSize = 256;
- break;
- case 0x4F09:
- rmregs.pB[0].bBufferType = INPUT_BUFFER;
- rmregs.pB[0].bSelCRF = REG_OFFSET(reg_es);
- rmregs.pB[0].bOffCRF = REG_OFFSET(reg_edi);
- rmregs.pB[0].pAddress = RMBuf;
- rmregs.pB[0].ulSize = 1024;
- break;
- case 0x4F0A:
- /* Due to bugs in the mini-VDM in OS/2, the 0x4F0A protected
- * mode interface functions will not work (we never get any
- * selectors returned), so we fail this function here. The
- * rest of the VBE/Core driver will work properly if this
- * function is failed, because the VBE 2.0 and 3.0 specs
- * allow for this.
- */
- regs->eax = 0x014F;
- return;
- }
- }
- if (useVPMI)
- PM_VIDEOPMI32Request(&Adapter,PMIREQUEST_SOFTWAREINT,NULL,&rmregs);
- else {
- DosSysCtl(6, &rmregs);
- }
-
- OUTDPMI(eax); OUTDPMI(ebx); OUTDPMI(ecx); OUTDPMI(edx); OUTDPMI(esi); OUTDPMI(edi);
- if (((regs->eax & 0xFFFF) == 0x004F) && ((eax & 0xFFFF) == 0x4F00)) {
- /* Hack to fix up the missing 'VESA' string for mini-VDM */
- memcpy(RMBuf,"VESA",4);
- }
- regs->ds = rmregs.aCRF.reg_ds;
- regs->es = rmregs.aCRF.reg_es;
- regs->flags = rmregs.aCRF.reg_eflag;
-}
-
-#define IN(reg) rmregs.reg = in->e.reg
-#define OUT(reg) out->e.reg = rmregs.reg
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt.
-****************************************************************************/
-int PMAPI PM_int86(
- int intno,
- RMREGS *in,
- RMREGS *out)
-{
- DPMI_regs rmregs;
-
- memset(&rmregs, 0, sizeof(rmregs));
- IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
- DPMI_int86(intno,&rmregs);
- OUT(eax); OUT(ebx); OUT(ecx); OUT(edx); OUT(esi); OUT(edi);
- out->x.cflag = rmregs.flags & 0x1;
- return out->x.ax;
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt.
-****************************************************************************/
-int PMAPI PM_int86x(
- int intno,
- RMREGS *in,
- RMREGS *out,
- RMSREGS *sregs)
-{
- DPMI_regs rmregs;
-
- memset(&rmregs, 0, sizeof(rmregs));
- IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
- rmregs.es = sregs->es;
- rmregs.ds = sregs->ds;
- DPMI_int86(intno,&rmregs);
- OUT(eax); OUT(ebx); OUT(ecx); OUT(edx); OUT(esi); OUT(edi);
- sregs->es = rmregs.es;
- sregs->cs = rmregs.cs;
- sregs->ss = rmregs.ss;
- sregs->ds = rmregs.ds;
- out->x.cflag = rmregs.flags & 0x1;
- return out->x.ax;
-}
-
-/****************************************************************************
-REMARKS:
-Call a real mode far function.
-****************************************************************************/
-void PMAPI PM_callRealMode(
- uint seg,
- uint off,
- RMREGS *in,
- RMSREGS *sregs)
-{
- PM_fatalError("PM_callRealMode not supported on OS/2!");
-}
-
-/****************************************************************************
-REMARKS:
-Return the amount of available memory.
-****************************************************************************/
-void PMAPI PM_availableMemory(
- ulong *physical,
- ulong *total)
-{
- /* Unable to get reliable values from OS/2 for this */
- *physical = *total = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of locked, physical memory for DMA operations.
-****************************************************************************/
-void * PMAPI PM_allocLockedMem(
- uint size,
- ulong *physAddr,
- ibool contiguous,
- ibool below16M)
-{
- parmsIn[0] = size;
- parmsIn[1] = contiguous;
- parmsIn[2] = below16M;
- CallSDDHelp(PMHELP_ALLOCLOCKED);
- *physAddr = parmsOut[1];
- return (void*)parmsOut[0];
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of locked physical memory.
-****************************************************************************/
-void PMAPI PM_freeLockedMem(
- void *p,
- uint size,
- ibool contiguous)
-{
- parmsIn[0] = (ulong)p;
- CallSDDHelp(PMHELP_FREELOCKED);
-}
-
-/****************************************************************************
-REMARKS:
-Allocates a new block of pages for the page block manager.
-****************************************************************************/
-static pageblock *PM_addNewPageBlock(void)
-{
- int i;
- pageblock *newBlock;
- char *p,*next;
-
- /* Allocate memory for the new page block, and add to head of list */
- if (DosAllocSharedMem((void**)&newBlock,NULL,PAGE_BLOCK_SIZE,OBJ_GETTABLE | PAG_READ | PAG_WRITE | PAG_COMMIT))
- return NULL;
- if (!PM_lockDataPages(newBlock,PAGE_BLOCK_SIZE,&newBlock->lockHandle))
- return NULL;
- newBlock->prev = NULL;
- newBlock->next = pageBlocks;
- if (pageBlocks)
- pageBlocks->prev = newBlock;
- pageBlocks = newBlock;
-
- /* Initialise the page aligned free list for the page block */
- newBlock->freeCount = PAGES_PER_BLOCK;
- newBlock->freeList = p = (char*)(((ulong)(newBlock + 1) + (PM_PAGE_SIZE-1)) & ~(PM_PAGE_SIZE-1));
- newBlock->freeListStart = newBlock->freeList;
- newBlock->freeListEnd = p + (PAGES_PER_BLOCK-1) * PM_PAGE_SIZE;
- for (i = 0; i < PAGES_PER_BLOCK; i++,p = next)
- FREELIST_NEXT(p) = next = p + PM_PAGE_SIZE;
- FREELIST_NEXT(p - PM_PAGE_SIZE) = NULL;
- return newBlock;
-}
-
-/****************************************************************************
-REMARKS:
-Allocates a page aligned and page sized block of memory
-****************************************************************************/
-void * PMAPI PM_allocPage(
- ibool locked)
-{
- pageblock *block;
- void *p;
-
- /* Scan the block list looking for any free blocks. Allocate a new
- * page block if no free blocks are found.
- */
- for (block = pageBlocks; block != NULL; block = block->next) {
- if (block->freeCount)
- break;
- }
- if (block == NULL && (block = PM_addNewPageBlock()) == NULL)
- return NULL;
- block->freeCount--;
- p = block->freeList;
- block->freeList = FREELIST_NEXT(p);
- (void)locked;
- return p;
-}
-
-/****************************************************************************
-REMARKS:
-Free a page aligned and page sized block of memory
-****************************************************************************/
-void PMAPI PM_freePage(
- void *p)
-{
- pageblock *block;
-
- /* First find the page block that this page belongs to */
- for (block = pageBlocks; block != NULL; block = block->next) {
- if (p >= block->freeListStart && p <= block->freeListEnd)
- break;
- }
- CHECK(block != NULL);
-
- /* Now free the block by adding it to the free list */
- FREELIST_NEXT(p) = block->freeList;
- block->freeList = p;
- if (++block->freeCount == PAGES_PER_BLOCK) {
- /* If all pages in the page block are now free, free the entire
- * page block itself.
- */
- if (block == pageBlocks) {
- /* Delete from head */
- pageBlocks = block->next;
- if (block->next)
- block->next->prev = NULL;
- }
- else {
- /* Delete from middle of list */
- CHECK(block->prev != NULL);
- block->prev->next = block->next;
- if (block->next)
- block->next->prev = block->prev;
- }
-
- /* Unlock the memory and free it */
- PM_unlockDataPages(block,PAGE_BLOCK_SIZE,&block->lockHandle);
- DosFreeMem(block);
- }
-}
-
-/****************************************************************************
-REMARKS:
-Map in all the shared memory blocks for managing the memory pages above.
-****************************************************************************/
-void PMAPI PM_mapSharedPages(void)
-{
- pageblock *block;
-
- /* Map all the page blocks above into the shared memory for process */
- for (block = pageBlocks; block != NULL; block = block->next) {
- DosGetSharedMem(block, PAG_READ | PAG_WRITE);
- }
-}
-
-/****************************************************************************
-REMARKS:
-Lock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_lockDataPages(
- void *p,
- uint len,
- PM_lockHandle *lockHandle)
-{
- parmsIn[0] = (ulong)p;
- parmsIn[1] = len;
- CallSDDHelp(PMHELP_LOCKPAGES);
- lockHandle->h[0] = parmsOut[1];
- lockHandle->h[1] = parmsOut[2];
- lockHandle->h[2] = parmsOut[3];
- return parmsOut[0];
-}
-
-/****************************************************************************
-REMARKS:
-Unlock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_unlockDataPages(
- void *p,
- uint len,
- PM_lockHandle *lockHandle)
-{
- parmsIn[0] = lockHandle->h[0];
- parmsIn[1] = lockHandle->h[1];
- parmsIn[2] = lockHandle->h[2];
- return CallSDDHelp(PMHELP_UNLOCKPAGES);
-}
-
-/****************************************************************************
-REMARKS:
-Lock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_lockCodePages(
- void (*p)(),
- uint len,
- PM_lockHandle *lockHandle)
-{
- parmsIn[0] = (ulong)p;
- parmsIn[1] = len;
- CallSDDHelp(PMHELP_LOCKPAGES);
- lockHandle->h[0] = parmsOut[1];
- lockHandle->h[1] = parmsOut[2];
- lockHandle->h[2] = parmsOut[3];
- return parmsOut[0];
-}
-
-/****************************************************************************
-REMARKS:
-Unlock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_unlockCodePages(
- void (*p)(),
- uint len,
- PM_lockHandle *lockHandle)
-{
- parmsIn[0] = lockHandle->h[0];
- parmsIn[1] = lockHandle->h[1];
- parmsIn[2] = lockHandle->h[2];
- return CallSDDHelp(PMHELP_UNLOCKPAGES);
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display banks.
-****************************************************************************/
-void PMAPI PM_setBankA(
- int bank)
-{
- INTCRF rmregs;
-
- if (!InitInt10())
- return;
- memset(&rmregs, 0, sizeof(rmregs));
- rmregs.ulBIOSIntNo = 0x10;
- rmregs.aCRF.reg_eax = 0x4F05;
- rmregs.aCRF.reg_ebx = 0x0000;
- rmregs.aCRF.reg_edx = bank;
- PM_VIDEOPMI32Request(&Adapter,PMIREQUEST_SOFTWAREINT,&rmregs,NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display banks.
-****************************************************************************/
-void PMAPI PM_setBankAB(
- int bank)
-{
- INTCRF rmregs;
-
- if (!InitInt10())
- return;
- memset(&rmregs, 0, sizeof(rmregs));
- rmregs.ulBIOSIntNo = 0x10;
- rmregs.aCRF.reg_eax = 0x4F05;
- rmregs.aCRF.reg_ebx = 0x0000;
- rmregs.aCRF.reg_edx = bank;
- PM_VIDEOPMI32Request(&Adapter,PMIREQUEST_SOFTWAREINT,&rmregs,NULL);
- rmregs.ulBIOSIntNo = 0x10;
- rmregs.aCRF.reg_eax = 0x4F05;
- rmregs.aCRF.reg_ebx = 0x0001;
- rmregs.aCRF.reg_edx = bank;
- PM_VIDEOPMI32Request(&Adapter,PMIREQUEST_SOFTWAREINT,&rmregs,NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display start address.
-****************************************************************************/
-void PMAPI PM_setCRTStart(
- int x,
- int y,
- int waitVRT)
-{
- INTCRF rmregs;
-
- if (!InitInt10())
- return;
- memset(&rmregs, 0, sizeof(rmregs));
- rmregs.ulBIOSIntNo = 0x10;
- rmregs.aCRF.reg_eax = 0x4F07;
- rmregs.aCRF.reg_ebx = waitVRT;
- rmregs.aCRF.reg_ecx = x;
- rmregs.aCRF.reg_edx = y;
- PM_VIDEOPMI32Request(&Adapter,PMIREQUEST_SOFTWAREINT,&rmregs,NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Execute the POST on the secondary BIOS for a controller.
-****************************************************************************/
-ibool PMAPI PM_doBIOSPOST(
- ushort axVal,
- ulong BIOSPhysAddr,
- void *mappedBIOS,
- ulong BIOSLen)
-{
- (void)axVal;
- (void)BIOSPhysAddr;
- (void)mappedBIOS;
- (void)BIOSLen;
- return false;
-}
-
-/****************************************************************************
-PARAMETERS:
-base - The starting physical base address of the region
-size - The size in bytes of the region
-type - Type to place into the MTRR register
-
-RETURNS:
-Error code describing the result.
-
-REMARKS:
-Function to enable write combining for the specified region of memory.
-****************************************************************************/
-int PMAPI PM_enableWriteCombine(
- ulong base,
- ulong size,
- uint type)
-{
- return MTRR_enableWriteCombine(base,size,type);
-}
-
-/* TODO: Move the MTRR helper stuff into the call gate, or better yet */
-/* entirely into the ring 0 helper driver!! */
-
-/* MTRR helper functions. To make it easier to implement the MTRR support
- * under OS/2, we simply put our ring 0 helper functions into the
- * helper device driver rather than the entire MTRR module. This makes
- * it easier to maintain the MTRR support since we don't need to deal
- * with 16-bit ring 0 code in the MTRR library.
- */
-
-/****************************************************************************
-REMARKS:
-Flush the translation lookaside buffer.
-****************************************************************************/
-void PMAPI PM_flushTLB(void)
-{
- CallSDDHelp(PMHELP_FLUSHTLB);
-}
-
-/****************************************************************************
-REMARKS:
-Return true if ring 0 (or if we can call the helpers functions at ring 0)
-****************************************************************************/
-ibool _ASMAPI _MTRR_isRing0(void)
-{
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-Read and return the value of the CR4 register
-****************************************************************************/
-ulong _ASMAPI _MTRR_saveCR4(void)
-{
- return CallSDDHelp(PMHELP_SAVECR4);
-}
-
-/****************************************************************************
-REMARKS:
-Restore the value of the CR4 register
-****************************************************************************/
-void _ASMAPI _MTRR_restoreCR4(ulong cr4Val)
-{
- parmsIn[0] = cr4Val;
- CallSDDHelp(PMHELP_RESTORECR4);
-}
-
-/****************************************************************************
-REMARKS:
-Read a machine status register for the CPU.
-****************************************************************************/
-void _ASMAPI _MTRR_readMSR(
- ulong reg,
- ulong *eax,
- ulong *edx)
-{
- parmsIn[0] = reg;
- CallSDDHelp(PMHELP_READMSR);
- *eax = parmsOut[0];
- *edx = parmsOut[1];
-}
-
-/****************************************************************************
-REMARKS:
-Write a machine status register for the CPU.
-****************************************************************************/
-void _ASMAPI _MTRR_writeMSR(
- ulong reg,
- ulong eax,
- ulong edx)
-{
- parmsIn[0] = reg;
- parmsIn[1] = eax;
- parmsIn[2] = edx;
- CallSDDHelp(PMHELP_WRITEMSR);
-}
-
-PM_MODULE PMAPI PM_loadLibrary(
- const char *szDLLName)
-{
- /* TODO: Implement this to load shared libraries! */
- (void)szDLLName;
- return NULL;
-}
-
-void * PMAPI PM_getProcAddress(
- PM_MODULE hModule,
- const char *szProcName)
-{
- /* TODO: Implement this! */
- (void)hModule;
- (void)szProcName;
- return NULL;
-}
-
-void PMAPI PM_freeLibrary(
- PM_MODULE hModule)
-{
- /* TODO: Implement this! */
- (void)hModule;
-}
-
-/****************************************************************************
-REMARKS:
-Internal function to convert the find data to the generic interface.
-****************************************************************************/
-static void convertFindData(
- PM_findData *findData,
- FILEFINDBUF3 *blk)
-{
- ulong dwSize = findData->dwSize;
-
- memset(findData,0,findData->dwSize);
- findData->dwSize = dwSize;
- if (blk->attrFile & FILE_READONLY)
- findData->attrib |= PM_FILE_READONLY;
- if (blk->attrFile & FILE_DIRECTORY)
- findData->attrib |= PM_FILE_DIRECTORY;
- if (blk->attrFile & FILE_ARCHIVED)
- findData->attrib |= PM_FILE_ARCHIVE;
- if (blk->attrFile & FILE_HIDDEN)
- findData->attrib |= PM_FILE_HIDDEN;
- if (blk->attrFile & FILE_SYSTEM)
- findData->attrib |= PM_FILE_SYSTEM;
- findData->sizeLo = blk->cbFile;
- findData->sizeHi = 0;
- strncpy(findData->name,blk->achName,PM_MAX_PATH);
- findData->name[PM_MAX_PATH-1] = 0;
-}
-
-#define FIND_MASK (FILE_ARCHIVED | FILE_DIRECTORY | FILE_SYSTEM | FILE_HIDDEN | FILE_READONLY)
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-void *PMAPI PM_findFirstFile(
- const char *filename,
- PM_findData *findData)
-{
- FILEFINDBUF3 blk;
- HDIR hdir = HDIR_CREATE;
- ulong count = 1;
-
- if (DosFindFirst((PSZ)filename,&hdir,FIND_MASK,&blk,sizeof(blk),&count,FIL_STANDARD) == NO_ERROR) {
- convertFindData(findData,&blk);
- return (void*)hdir;
- }
- return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
- void *handle,
- PM_findData *findData)
-{
- FILEFINDBUF3 blk;
- ulong count = 1;
-
- if (DosFindNext((HDIR)handle,&blk,sizeof(blk),&count) == NO_ERROR) {
- convertFindData(findData,&blk);
- return true;
- }
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
- void *handle)
-{
- DosFindClose((HDIR)handle);
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
- 0 - Current drive
- 1 - Drive A:
- 2 - Drive B:
- 3 - Drive C:
- etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
- char drive)
-{
- ulong cntDisk,cntDriveMap;
- ibool valid;
-
- DosQueryCurrentDisk(&cntDisk,&cntDriveMap);
- valid = (DosSetDefaultDisk(drive) == NO_ERROR);
- DosSetDefaultDisk(cntDisk);
- return valid;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
- int drive,
- char *dir,
- int len)
-{
- ulong length = len;
-
- DosQueryCurrentDir(drive, (PSZ)dir, &length);
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
- const char *filename,
- uint attrib)
-{
- FILESTATUS3 s;
-
- if (DosQueryPathInfo((PSZ)filename,FIL_STANDARD,(PVOID)&s,sizeof(s)))
- return;
- s.attrFile = 0;
- if (attrib & PM_FILE_READONLY)
- s.attrFile |= FILE_READONLY;
- if (attrib & PM_FILE_ARCHIVE)
- s.attrFile |= FILE_ARCHIVED;
- if (attrib & PM_FILE_HIDDEN)
- s.attrFile |= FILE_HIDDEN;
- if (attrib & PM_FILE_SYSTEM)
- s.attrFile |= FILE_SYSTEM;
- DosSetPathInfo((PSZ)filename,FIL_STANDARD,(PVOID)&s,sizeof(s),0L);
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file attributes for a specific file.
-****************************************************************************/
-uint PMAPI PM_getFileAttr(
- const char *filename)
-{
- FILESTATUS3 fs3;
- uint retval = 0;
-
- if (DosQueryPathInfo((PSZ)filename, FIL_STANDARD, &fs3, sizeof(FILESTATUS3)))
- return 0;
- if (fs3.attrFile & FILE_READONLY)
- retval |= PM_FILE_READONLY;
- if (fs3.attrFile & FILE_ARCHIVED)
- retval |= PM_FILE_ARCHIVE;
- if (fs3.attrFile & FILE_HIDDEN)
- retval |= PM_FILE_HIDDEN;
- if (fs3.attrFile & FILE_SYSTEM)
- retval |= PM_FILE_SYSTEM;
- return retval;
-}
-
-/****************************************************************************
-REMARKS:
-Function to create a directory.
-****************************************************************************/
-ibool PMAPI PM_mkdir(
- const char *filename)
-{
- return DosCreateDir((PSZ)filename,NULL) == NO_ERROR;
-}
-
-/****************************************************************************
-REMARKS:
-Function to remove a directory.
-****************************************************************************/
-ibool PMAPI PM_rmdir(
- const char *filename)
-{
- return DosDeleteDir((PSZ)filename) == NO_ERROR;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_getFileTime(
- const char *filename,
- ibool gmTime,
- PM_time *time)
-{
- FILESTATUS3 fs3;
- struct tm tc;
- struct tm *ret;
- time_t tt;
-
- if (DosQueryPathInfo((PSZ)filename, FIL_STANDARD, &fs3, sizeof(FILESTATUS3)))
- return false;
- if (gmTime) {
- tc.tm_year = fs3.fdateLastWrite.year + 80;
- tc.tm_mon = fs3.fdateLastWrite.month - 1;
- tc.tm_mday = fs3.fdateLastWrite.day;
- tc.tm_hour = fs3.ftimeLastWrite.hours;
- tc.tm_min = fs3.ftimeLastWrite.minutes;
- tc.tm_sec = fs3.ftimeLastWrite.twosecs * 2;
- if((tt = mktime(&tc)) == -1)
- return false;
- if(!(ret = gmtime(&tt)))
- return false;
- time->sec = ret->tm_sec;
- time->day = ret->tm_mday;
- time->mon = ret->tm_mon + 1;
- time->year = ret->tm_year - 80;
- time->min = ret->tm_min;
- time->hour = ret->tm_hour;
- }
- else {
- time->sec = fs3.ftimeLastWrite.twosecs * 2;
- time->day = fs3.fdateLastWrite.day;
- time->mon = fs3.fdateLastWrite.month;
- time->year = fs3.fdateLastWrite.year;
- time->min = fs3.ftimeLastWrite.minutes;
- time->hour = fs3.ftimeLastWrite.hours;
- }
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-Function to set the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_setFileTime(
- const char *filename,
- ibool gmTime,
- PM_time *time)
-{
- FILESTATUS3 fs3;
- struct tm tc;
- struct tm *ret;
- time_t tt;
-
- if (DosQueryPathInfo((PSZ)filename,FIL_STANDARD,(PVOID)&fs3,sizeof(fs3)))
- return false;
- if (gmTime) {
- tc.tm_year = time->year + 80;
- tc.tm_mon = time->mon - 1;
- tc.tm_mday = time->day;
- tc.tm_hour = time->hour;
- tc.tm_min = time->min;
- tc.tm_sec = time->sec;
- if((tt = mktime(&tc)) == -1)
- return false;
- ret = localtime(&tt);
- fs3.ftimeLastWrite.twosecs = ret->tm_sec / 2;
- fs3.fdateLastWrite.day = ret->tm_mday;
- fs3.fdateLastWrite.month = ret->tm_mon + 1;
- fs3.fdateLastWrite.year = ret->tm_year - 80;
- fs3.ftimeLastWrite.minutes = ret->tm_min;
- fs3.ftimeLastWrite.hours = ret->tm_hour;
- }
- else {
- fs3.ftimeLastWrite.twosecs = time->sec / 2;
- fs3.fdateLastWrite.day = time->day;
- fs3.fdateLastWrite.month = time->mon;
- fs3.fdateLastWrite.year = time->year;
- fs3.ftimeLastWrite.minutes = time->min;
- fs3.ftimeLastWrite.hours = time->hour;
- }
- memcpy(&fs3.fdateLastAccess, &fs3.fdateLastWrite, sizeof(FDATE));
- memcpy(&fs3.fdateCreation, &fs3.fdateLastWrite, sizeof(FDATE));
- memcpy(&fs3.ftimeLastAccess, &fs3.ftimeLastWrite, sizeof(FTIME));
- memcpy(&fs3.ftimeCreation, &fs3.ftimeLastWrite, sizeof(FTIME));
- DosSetPathInfo((PSZ)filename,FIL_STANDARD,(PVOID)&fs3,sizeof(FILESTATUS3),0L);
- return true;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/os2/vflat.c
deleted file mode 100644
index 579ef2c95c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2/vflat.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-ibool PMAPI VF_available(void)
-{
- return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
- baseAddr = baseAddr;
- bankSize = bankSize;
- codeLen = codeLen;
- bankFunc = bankFunc;
- return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/os2/ztimer.c
deleted file mode 100644
index 30ffe4340b..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2/ztimer.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: OS/2
-*
-* Description: OS specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-/*---------------------------- Global variables ---------------------------*/
-
-static ulong frequency;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-void __ZTimerInit(void)
-{
- DosTmrQueryFreq(&frequency);
-}
-
-/****************************************************************************
-REMARKS:
-Start the Zen Timer counting.
-****************************************************************************/
-#define __LZTimerOn(tm) DosTmrQueryTime((QWORD*)&tm->start)
-
-/****************************************************************************
-REMARKS:
-Compute the lap time since the timer was started.
-****************************************************************************/
-static ulong __LZTimerLap(
- LZTimerObject *tm)
-{
- CPU_largeInteger tmLap,tmCount;
-
- DosTmrQueryTime((QWORD*)&tmLap);
- _CPU_diffTime64(&tm->start,&tmLap,&tmCount);
- return _CPU_calcMicroSec(&tmCount,frequency);
-}
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOff(tm) DosTmrQueryTime((QWORD*)&tm->end)
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-static ulong __LZTimerCount(
- LZTimerObject *tm)
-{
- CPU_largeInteger tmCount;
-
- _CPU_diffTime64(&tm->start,&tm->end,&tmCount);
- return _CPU_calcMicroSec(&tmCount,frequency);
-}
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION 1000
-
-/****************************************************************************
-REMARKS:
-Read the Long Period timer value from the BIOS timer tick.
-****************************************************************************/
-static ulong __ULZReadTime(void)
-{
- ULONG count;
- DosQuerySysInfo( QSV_MS_COUNT, QSV_MS_COUNT, &count, sizeof(ULONG) );
- return count;
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{ return finish - start; }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2pm/event.c b/board/MAI/bios_emulator/scitech/src/pm/os2pm/event.c
deleted file mode 100644
index 7af20a9568..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2pm/event.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: IBM PC (OS/2)
-*
-* Description: OS/2 implementation for the SciTech cross platform
-* event library.
-*
-****************************************************************************/
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static int oldMouseState; /* Old mouse state */
-static ulong oldKeyMessage; /* Old keyboard state */
-static ushort keyUpMsg[256] = {0};/* Table of key up messages */
-static int rangeX,rangeY; /* Range of mouse coordinates */
-HMOU _EVT_hMouse; /* Handle to the mouse driver */
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* These are not used under OS/2 */
-#define _EVT_disableInt() 1
-#define _EVT_restoreInt(flags)
-
-/****************************************************************************
-PARAMETERS:
-scanCode - Scan code to test
-
-REMARKS:
-This macro determines if a specified key is currently down at the
-time that the call is made.
-****************************************************************************/
-#define _EVT_isKeyDown(scanCode) (keyUpMsg[scanCode] != 0)
-
-/****************************************************************************
-REMARKS:
-Pumps all messages in the message queue from OS/2 into our event queue.
-****************************************************************************/
-static void _EVT_pumpMessages(void)
-{
- /* TODO: Implement this for OS/2 Presentation Manager apps! */
-}
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-****************************************************************************/
-#define _EVT_maskKeyCode(evt)
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort()
-{
- EVT_exit();
- PM_fatalError("Unhandled exception!");
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
- _EVT_mouseMoveHandler mouseMove)
-{
- /* Initialise the event queue */
- EVT.mouseMove = mouseMove;
- initEventQueue();
- oldMouseState = 0;
- oldKeyMessage = 0;
- memset(keyUpMsg,0,sizeof(keyUpMsg));
-
- /* TODO: OS/2 PM specific initialisation code! */
-
- /* Catch program termination signals so we can clean up properly */
- signal(SIGABRT, _EVT_abort);
- signal(SIGFPE, _EVT_abort);
- signal(SIGINT, _EVT_abort);
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
- int xRes,
- int yRes)
-{
- rangeX = xRes;
- rangeY = yRes;
-}
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVT_resume(void)
-{
- /* Do nothing for OS/2 */
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVT_suspend(void)
-{
- /* Do nothing for OS/2 */
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVT_exit(void)
-{
- /* Restore signal handlers */
- signal(SIGABRT, SIG_DFL);
- signal(SIGFPE, SIG_DFL);
- signal(SIGINT, SIG_DFL);
-
- /* TODO: OS/2 PM specific exit code */
-}
-
-/****************************************************************************
-REMARKS
-Modifes the mouse coordinates as necessary if scaling to OS coordinates,
-and sets the OS mouse cursor position.
-****************************************************************************/
-#define _EVT_setMousePos(x,y)
diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2pm/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/os2pm/oshdr.h
deleted file mode 100644
index 0b69f8222c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/os2pm/oshdr.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit OS/2
-*
-* Description: Include file to include all OS specific header files.
-*
-****************************************************************************/
-
-#define INCL_DOSERRORS
-#define INCL_DOS
-#define INCL_SUB
-#define INCL_VIO
-#define INCL_KBD
-#include <os2.h>
diff --git a/board/MAI/bios_emulator/scitech/src/pm/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/oshdr.h
deleted file mode 100644
index 404e5c93c5..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/oshdr.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Header file to pull in OS specific headers for the target
-* OS environment.
-*
-****************************************************************************/
-
-#if defined(__SMX32__)
-#include "smx/oshdr.h"
-#elif defined(__RTTARGET__)
-#include "rttarget/oshdr.h"
-#elif defined(__REALDOS__)
-#include "dos/oshdr.h"
-#elif defined(__WIN32_VXD__)
-#include "vxd/oshdr.h"
-#elif defined(__NT_DRIVER__)
-#include "ntdrv/oshdr.h"
-#elif defined(__WINDOWS32__)
-#include "win32/oshdr.h"
-#elif defined(__OS2_VDD__)
-#include "vxd/oshdr.h"
-#elif defined(__OS2__)
-#if defined(__OS2_PM__)
-#include "os2pm/oshdr.h"
-#else
-#include "os2/oshdr.h"
-#endif
-#elif defined(__LINUX__)
-#if defined(__USE_X11__)
-#include "x11/oshdr.h"
-#else
-#include "linux/oshdr.h"
-#endif
-#elif defined(__QNX__)
-#if defined(__USE_PHOTON__)
-#include "photon/oshdr.h"
-#elif defined(__USE_X11__)
-#include "x11/oshdr.h"
-#else
-#include "qnx/oshdr.h"
-#endif
-#elif defined(__BEOS__)
-#include "beos/oshdr.h"
-#else
-#error PM library not ported to this platform yet!
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/pm/photon/event.c b/board/MAI/bios_emulator/scitech/src/pm/photon/event.c
deleted file mode 100644
index 581da16fdf..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/photon/event.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/****************************************************************************
-*
-* SciTech Multi-platform Graphics Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: QNX Photon GUI
-*
-* Description: QNX fullscreen console implementation for the SciTech
-* cross platform event library.
-*
-****************************************************************************/
-
-/*--------------------------- Global variables ----------------------------*/
-
-static ushort keyUpMsg[256] = {0};/* Table of key up messages */
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* These are not used under Linux */
-#define _EVT_disableInt() 1
-#define _EVT_restoreInt(flags)
-
-/****************************************************************************
-PARAMETERS:
-scanCode - Scan code to test
-
-REMARKS:
-This macro determines if a specified key is currently down at the
-time that the call is made.
-****************************************************************************/
-static ibool _EVT_isKeyDown(
- uchar scancode)
-{
- return (KeyState[(scancode & 0xf8) >> 3] & (1 << (scancode & 0x7)) ?
- true : false);
-}
-
-/****************************************************************************
-REMARKS:
-Retrieves all events from the mouse/keyboard event queue and stuffs them
-into the MGL event queue for further processing.
-****************************************************************************/
-static void _EVT_pumpMessages(void)
-{
- int pid;
- uint msg, but_stat, message;
- uchar evt[sizeof (PhEvent_t) + 1024];
- PhEvent_t *event = (void *)evt;
- PhKeyEvent_t *key;
- PhPointerEvent_t *mouse;
- static int extended;
- event_t _evt;
-
- while (count < EVENTQSIZE) {
- uint mods = 0, keyp = 0;
-
- pid = Creceive(0, &msg, sizeof (msg));
-
- if (pid == -1)
- return;
-
- if (PhEventRead(pid, event, sizeof (evt)) == Ph_EVENT_MSG) {
- memset(&evt, 0, sizeof (evt));
- if (event->type == Ph_EV_KEY) {
- key = PhGetData(event);
-
- if (key->key_flags & KEY_SCAN_VALID) {
- keyp = key->key_scan;
- if (key->key_flags & KEY_DOWN)
- KeyState[(keyp & 0xf800) >> 11]
- |= 1 << ((keyp & 0x700) >> 8);
- else
- KeyState[(keyp & 0xf800) >> 11]
- &= ~(1 << ((keyp & 0x700) >> 8));
- }
- if ((key->key_flags & KEY_SYM_VALID) || extended)
- keyp |= key->key_sym;
-
- /* No way to tell left from right... */
- if (key->key_mods & KEYMOD_SHIFT)
- mods = (EVT_LEFTSHIFT | EVT_RIGHTSHIFT);
- if (key->key_mods & KEYMOD_CTRL)
- mods |= (EVT_CTRLSTATE | EVT_LEFTCTRL);
- if (key->key_mods & KEYMOD_ALT)
- mods |= (EVT_ALTSTATE | EVT_LEFTALT);
-
- _evt.when = evt->timestamp;
- if (key->key_flags & KEY_REPEAT) {
- _evt.what = EVT_KEYREPEAT;
- _evt.message = 0x10000;
- }
- else if (key->key_flags & KEY_DOWN)
- _evt.what = EVT_KEYDOWN;
- else
- _evt.what = EVT_KEYUP;
- _evt.modifiers = mods;
- _evt.message |= keyp;
-
- addEvent(&_evt);
-
- switch(key->key_scan & 0xff00) {
- case 0xe000:
- extended = 1;
- break;
- case 0xe001:
- extended = 2;
- break;
- default:
- if (extended)
- extended--;
- }
- }
- else if (event->type & Ph_EV_PTR_ALL) {
- but_stat = message = 0;
- mouse = PhGetData(event);
-
- if (mouse->button_state & Ph_BUTTON_3)
- but_stat = EVT_LEFTBUT;
- if (mouse->buttons & Ph_BUTTON_3)
- message = EVT_LEFTBMASK;
-
- if (mouse->button_state & Ph_BUTTON_1)
- but_stat |= EVT_RIGHTBUT;
- if (mouse->buttons & Ph_BUTTON_1)
- message |= EVT_RIGHTBMASK;
-
- _evt.when = evt->timestamp;
- if (event->type & Ph_EV_PTR_MOTION) {
- _evt.what = EVT_MOUSEMOVE;
- _evt.where_x = mouse->pos.x;
- _evt.where_y = mouse->pos.y;
- _evt.modifiers = but_stat;
- addEvent(&_evt);
- }
- if (event->type & Ph_EV_BUT_PRESS)
- _evt.what = EVT_MOUSEDOWN;
- else
- _evt.what = EVT_MOUSEUP;
- _evt.where_x = mouse->pos.x;
- _evt.where_y = mouse->pos.y;
- _evt.modifiers = but_stat;
- _evt.message = message;
- addEvent(&_evt);
- }
- }
- else
- return;
- }
-}
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-****************************************************************************/
-#define _EVT_maskKeyCode(evt)
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort(
- int signo)
-{
- char buf[80];
-
- EVT_exit();
- sprintf(buf,"Terminating on signal %d",signo);
- PM_fatalError(buf);
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
- _EVT_mouseMoveHandler mouseMove)
-{
- int i;
-
- /* Initialise the event queue */
- _mouseMove = mouseMove;
- initEventQueue();
- memset((void *)KeyState, 0, sizeof (KeyState));
-
- /* Catch program termination signals so we can clean up properly */
- signal(SIGABRT, _EVT_abort);
- signal(SIGFPE, _EVT_abort);
- signal(SIGINT, _EVT_abort);
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
- int xRes,
- int yRes)
-{
- /* TODO: Need to call Input to change the coordinates that it returns */
- /* for mouse events!! */
-}
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVT_resume(void)
-{
- /* Do nothing for Photon */
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVT_suspend(void)
-{
- /* Do nothing for Photon */
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVT_exit(void)
-{
- /* Restore signal handlers */
- signal(SIGABRT, SIG_DFL);
- signal(SIGFPE, SIG_DFL);
- signal(SIGINT, SIG_DFL);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/photon/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/photon/oshdr.h
deleted file mode 100644
index 3c72563de2..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/photon/oshdr.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/****************************************************************************
-*
-* SciTech Multi-platform Graphics Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: QNX Photon GUI
-*
-* Description: Include file to include all OS specific header files.
-*
-****************************************************************************/
-
-#include <sys/mouse.h>
-#include <sys/keyboard.h>
-#include <sys/fd.h>
-#include <sys/stat.h>
-#include <conio.h>
-#include <process.h>
-#include <sys/kernel.h>
-#include <Ph.h>
diff --git a/board/MAI/bios_emulator/scitech/src/pm/pm.vpw b/board/MAI/bios_emulator/scitech/src/pm/pm.vpw
deleted file mode 100644
index 26e68a7a3a..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/pm.vpw
+++ /dev/null
@@ -1,43 +0,0 @@
-[Dependencies]
-[CurrentProject]
-curproj=pmlinux.vpj
-[ProjectFiles]
-pmcommon.vpj
-pmdos.vpj
-pmlinux.vpj
-pmqnx.vpj
-pmvxd.vpj
-pmwin32.vpj
-z_samples.vpj
-..\a-global includes.vpj
-[TreeExpansion]
-"..\a-global includes.vpj" 0
-pmcommon.vpj 0
-pmdos.vpj 0
-pmlinux.vpj 0
-pmqnx.vpj 0
-pmvxd.vpj 0
-pmwin32.vpj 0
-z_samples.vpj 1 1
-[State]
-SCREEN: 1280 1024 0 0 960 746 0 0 M 0 0 0 0 977 631
-CWD: C:\scitech\src\pm
-FILEHIST: 9
-C:\scitech\makedefs\gcc_win32.mk
-C:\scitech\bin\gcc2-w32.bat
-C:\scitech\bin\gcc2-c32.bat
-C:\scitech\bin\gcc2-linux.bat
-C:\scitech\makedefs\gcc_linux.mk
-C:\scitech\src\pm\linux\event.c
-C:\scitech\src\pm\linux\oshdr.h
-C:\scitech\src\pm\event.c
-C:\scitech\src\pm\pmlinux.vpj
-[ProjectDates]
-pmcommon.vpj=20010517164335290
-pmdos.vpj=20010517164335290
-pmlinux.vpj=20010620175829812
-pmqnx.vpj=20010517164335290
-pmvxd.vpj=20010517164335306
-pmwin32.vpj=20010517164335306
-z_samples.vpj=20010517164335306
-..\a-global includes.vpj=20010517164334978
diff --git a/board/MAI/bios_emulator/scitech/src/pm/pmcommon.vpj b/board/MAI/bios_emulator/scitech/src/pm/pmcommon.vpj
deleted file mode 100644
index 48b872d981..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/pmcommon.vpj
+++ /dev/null
@@ -1,45 +0,0 @@
-[COMPILER]
-version=5.0b
-MACRO=\n
-activeconfig=,wc10-d32
-FILTERNAME=Source Files\nInclude Files\nAssembler Files\nOther Files\n
-FILTERPATTERN=*.c;*.cpp;*.cxx;*.prg;*.pas;*.dpr;*.bas;*.java;*.sc;*.e;*.cob;*.html;*.rc\n*.h\n*.asm\n*.*\n
-FILTERASSOCIATEFILETYPES=0 0 0 0
-FILTERAPPCOMMAND=\n\n\n\n
-vcsproject=SCC:Perforce SCM://depot
-vcslocalpath=SCC:Perforce SCM:c:\
-compile=concur|capture|hide|:Compile:&Compile,
-make=concur|capture|hide|clear|saveall|:Build:&Build,
-rebuild=concur|capture|hide|clear|saveall|:Rebuild:&Rebuild,
-debug=concur|capture|hide|savenone|:Debug:&Debug,
-execute=hide|savenone|:Execute:E&xecute,
-user1=hide|:User 1:User 1,
-user2=hide|:User 2:User 2,
-workingdir=.
-includedirs=%(SCITECH)\include;%(PRIVATE)\include
-reffile=
-[FILES]
-common.c
-cpuinfo.c
-debug.c
-event.c
-makefile
-oshdr.h
-ztimer.c
-..\common\agplib.c
-codepage\us_eng.c
-common\_cpuinfo.asm
-common\_dma.asm
-common\_int64.asm
-common\_joy.asm
-common\_mtrr.asm
-common\_pcilib.asm
-common\agp.c
-common\keyboard.c
-common\malloc.c
-common\mtrr.c
-common\pcilib.c
-common\unixio.c
-common\vgastate.c
-[ASSOCIATION]
-[CONFIGURATIONS]
diff --git a/board/MAI/bios_emulator/scitech/src/pm/pmdos.vpj b/board/MAI/bios_emulator/scitech/src/pm/pmdos.vpj
deleted file mode 100644
index 1157513b30..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/pmdos.vpj
+++ /dev/null
@@ -1,41 +0,0 @@
-[SciTech]
-compiler=wc10-
-targetos=d32
-[COMPILER]
-version=5.0b
-MACRO=enable_current_compiler\n
-activeconfig=,TEST_HARNESS=1
-FILTERNAME=Source Files\nInclude Files\nAssembler Files\n
-FILTERPATTERN=*.c;*.cpp;*.cxx;*.prg;*.pas;*.dpr;*.bas;*.java;*.sc;*.e;*.cob;*.html;*.rc\n*.h\n*.asm\n
-FILTERASSOCIATEFILETYPES=0 0 0
-FILTERAPPCOMMAND=\n\n\n
-vcsproject=SCC:Perforce SCM://depot
-vcslocalpath=SCC:Perforce SCM:c:\
-compile=concur|capture|clear|:Compile:&Compile,dmake %n.obj -u %b
-make=concur|capture|clear|saveall|:Build:&Build,dmake install %b
-rebuild=concur|capture|clear|saveall|:Rebuild:&Rebuild,dmake cleanexe & dmake install -u %b
-debug=concur|capture|hide|savenone|:Debug:&Debug,
-execute=hide|savenone|nochangedir|:Execute:E&xecute,
-user1=hide|:User 1:User 1,
-user2=hide|:User 2:User 2,
-usertool_clean_directory=concur|capture|hide|savenone|nochangedir|:Clean Directory:C&lean Directory,dmake cleanexe
-workingdir=.
-includedirs=%(SCITECH)\include;%(PRIVATE)\include
-reffile=
-[FILES]
-dos\_event.asm
-dos\_lztimer.asm
-dos\_pm.asm
-dos\_pmdos.asm
-dos\_vflat.asm
-dos\cpuinfo.c
-dos\event.c
-dos\oshdr.h
-dos\pm.c
-dos\pmdos.c
-dos\vflat.c
-dos\ztimer.c
-[ASSOCIATION]
-[CONFIGURATIONS]
-config=,NORMAL_BUILD=1
-config=,TEST_HARNESS=1
diff --git a/board/MAI/bios_emulator/scitech/src/pm/pmlinux.vpj b/board/MAI/bios_emulator/scitech/src/pm/pmlinux.vpj
deleted file mode 100644
index 0bfbf8446a..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/pmlinux.vpj
+++ /dev/null
@@ -1,35 +0,0 @@
-[SciTech]
-compiler=gcc2-
-targetos=linux
-[COMPILER]
-version=5.0b
-MACRO=enable_current_compiler\n
-FILTERNAME=Source Files\nInclude Files\nAssembler Files\n
-FILTERPATTERN=*.c;*.cpp;*.cxx;*.prg;*.pas;*.dpr;*.bas;*.java;*.sc;*.e;*.cob;*.html;*.rc\n*.h\n*.asm\n
-FILTERASSOCIATEFILETYPES=0 0 0
-FILTERAPPCOMMAND=\n\n\n
-vcsproject=SCC:Perforce SCM://depot
-vcslocalpath=SCC:Perforce SCM:c:\
-activeconfig=,install BUILD_DLL=1
-compile=concur|capture|clear|:Compile:&Compile,dmake %n.o -u
-make=concur|capture|clear|saveall|:Build:&Build,dmake %b
-rebuild=concur|capture|clear|saveall|:Rebuild:&Rebuild,dmake cleanexe & dmake -u %b
-debug=concur|capture|hide|savenone|:Debug:&Debug,
-execute=hide|savenone|nochangedir|:Execute:E&xecute,
-user1=hide|:User 1:User 1,
-user2=hide|:User 2:User 2,
-usertool_clean_directory=concur|capture|hide|savenone|nochangedir|:Clean Directory:C&lean Directory,dmake cleanexe
-workingdir=.
-includedirs=%(SCITECH)\include;%(PRIVATE)\include
-reffile=
-[FILES]
-linux\cpuinfo.c
-linux\event.c
-linux\oshdr.h
-linux\pm.c
-linux\vflat.c
-linux\ztimer.c
-[ASSOCIATION]
-[CONFIGURATIONS]
-config=,install BUILD_DLL=1
-config=,install
diff --git a/board/MAI/bios_emulator/scitech/src/pm/pmntdrv.vpj b/board/MAI/bios_emulator/scitech/src/pm/pmntdrv.vpj
deleted file mode 100644
index 3ec35a76e4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/pmntdrv.vpj
+++ /dev/null
@@ -1,39 +0,0 @@
-[SciTech]
-compiler=vc60-
-targetos=drvw2k
-[COMPILER]
-version=5.0b
-MACRO=enable_current_compiler\n
-activeconfig=,wc10-d32
-FILTERNAME=Source Files\nInclude Files\nAssembler Files\n
-FILTERPATTERN=*.c;*.cpp;*.cxx;*.prg;*.pas;*.dpr;*.bas;*.java;*.sc;*.e;*.cob;*.html;*.rc\n*.h\n*.asm\n
-FILTERASSOCIATEFILETYPES=0 0 0
-FILTERAPPCOMMAND=\n\n\n
-vcsproject=SCC:Perforce SCM://depot
-vcslocalpath=SCC:Perforce SCM:c:\
-compile=concur|capture|:Compile:&Compile,dmake %n.obj
-make=concur|capture|clear|saveall|:Build:&Build,dmake install
-rebuild=concur|capture|clear|saveall|:Rebuild:&Rebuild,dmake cleanexe & dmake install -u
-debug=concur|capture|hide|savenone|:Debug:&Debug,
-execute=hide|savenone|nochangedir|:Execute:E&xecute,
-user1=hide|:User 1:User 1,
-user2=hide|:User 2:User 2,
-usertool_clean_directory=concur|capture|hide|savenone|:Clean Directory:&Clean Directory,dmake cleanexe
-workingdir=.
-includedirs=%(SCITECH)\include;%(PRIVATE)\include
-reffile=
-[FILES]
-..\..\include\ntdriver.h
-ntdrv\_pm.asm
-ntdrv\cpuinfo.c
-ntdrv\int86.c
-ntdrv\irq.c
-ntdrv\mem.c
-ntdrv\oshdr.h
-ntdrv\pm.c
-ntdrv\stdio.c
-ntdrv\stdlib.c
-ntdrv\vflat.c
-ntdrv\ztimer.c
-[ASSOCIATION]
-[CONFIGURATIONS]
diff --git a/board/MAI/bios_emulator/scitech/src/pm/pmqnx.vpj b/board/MAI/bios_emulator/scitech/src/pm/pmqnx.vpj
deleted file mode 100644
index d54170252c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/pmqnx.vpj
+++ /dev/null
@@ -1,35 +0,0 @@
-[SciTech]
-compiler=wc10-
-targetos=qnx
-[COMPILER]
-version=5.0b
-MACRO=enable_current_compiler\n
-activeconfig=,wc10-d32
-FILTERNAME=Source Files\nInclude Files\nAssembler Files\n
-FILTERPATTERN=*.c;*.cpp;*.cxx;*.prg;*.pas;*.dpr;*.bas;*.java;*.sc;*.e;*.cob;*.html;*.rc\n*.h\n*.asm\n
-FILTERASSOCIATEFILETYPES=0 0 0
-FILTERAPPCOMMAND=\n\n\n
-vcsproject=SCC:Perforce SCM://depot
-vcslocalpath=SCC:Perforce SCM:c:\
-compile=concur|capture|clear|:Compile:&Compile,dmake %n.obj
-make=concur|capture|clear|saveall|:Build:&Build,dmake install
-rebuild=concur|capture|clear|saveall|:Rebuild:&Rebuild,dmake cleanexe & dmake install -u
-debug=concur|capture|hide|savenone|:Debug:&Debug,
-execute=hide|savenone|nochangedir|:Execute:E&xecute,
-user1=hide|:User 1:User 1,
-user2=hide|:User 2:User 2,
-usertool_clean_directory=concur|capture|hide|savenone|nochangedir|:Clean Directory:C&lean Directory,dmake cleanexe
-workingdir=.
-includedirs=%(SCITECH)\include;%(PRIVATE)\include
-reffile=
-[FILES]
-qnx\_mtrrqnx.asm
-qnx\cpuinfo.c
-qnx\event.c
-qnx\mtrrqnx.c
-qnx\oshdr.h
-qnx\pm.c
-qnx\vflat.c
-qnx\ztimer.c
-[ASSOCIATION]
-[CONFIGURATIONS]
diff --git a/board/MAI/bios_emulator/scitech/src/pm/pmvxd.vpj b/board/MAI/bios_emulator/scitech/src/pm/pmvxd.vpj
deleted file mode 100644
index 1fcf911769..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/pmvxd.vpj
+++ /dev/null
@@ -1,34 +0,0 @@
-[SciTech]
-compiler=bc50-
-targetos=vxd
-[COMPILER]
-version=5.0b
-MACRO=enable_current_compiler\n
-activeconfig=,wc10-d32
-FILTERNAME=Source Files\nInclude Files\nAssembler Files\n
-FILTERPATTERN=*.c;*.cpp;*.cxx;*.prg;*.pas;*.dpr;*.bas;*.java;*.sc;*.e;*.cob;*.html;*.rc\n*.h\n*.asm\n
-FILTERASSOCIATEFILETYPES=0 0 0
-FILTERAPPCOMMAND=\n\n\n
-vcsproject=SCC:Perforce SCM://depot
-vcslocalpath=SCC:Perforce SCM:c:\
-compile=concur|capture|nochangedir|:Compile:&Compile,dmake %n.obj
-make=concur|capture|clear|saveall|nochangedir|:Build:&Build,dmake install
-rebuild=concur|capture|clear|saveall|nochangedir|:Rebuild:&Rebuild,dmake cleanexe & dmake install -u
-debug=concur|capture|hide|savenone|nochangedir|:Debug:&Debug,
-execute=hide|savenone|nochangedir|:Execute:E&xecute,
-user1=hide|:User 1:User 1,
-user2=hide|:User 2:User 2,
-usertool_clean_directory=concur|capture|hide|savenone|nochangedir|:Clean Directory:&Clean Directory,dmake cleanexe
-workingdir=.
-includedirs=%(SCITECH)\include;%(PRIVATE)\include
-reffile=
-[FILES]
-vxd\_pm.asm
-vxd\cpuinfo.c
-vxd\fileio.c
-vxd\oshdr.h
-vxd\pm.c
-vxd\vflat.c
-vxd\ztimer.c
-[ASSOCIATION]
-[CONFIGURATIONS]
diff --git a/board/MAI/bios_emulator/scitech/src/pm/pmwin32.vpj b/board/MAI/bios_emulator/scitech/src/pm/pmwin32.vpj
deleted file mode 100644
index ace682208c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/pmwin32.vpj
+++ /dev/null
@@ -1,35 +0,0 @@
-[SciTech]
-compiler=vc60-
-targetos=c32
-[COMPILER]
-version=5.0b
-MACRO=enable_current_compiler\n
-activeconfig=,wc10-d32
-FILTERNAME=Source Files\nInclude Files\nAssembler Files\n
-FILTERPATTERN=*.c;*.cpp;*.cxx;*.prg;*.pas;*.dpr;*.bas;*.java;*.sc;*.e;*.cob;*.html;*.rc\n*.h\n*.asm\n
-FILTERASSOCIATEFILETYPES=0 0 0
-FILTERAPPCOMMAND=\n\n\n
-vcsproject=SCC:Perforce SCM://depot
-vcslocalpath=SCC:Perforce SCM:c:\
-compile=concur|capture|:Compile:&Compile,dmake %n.obj
-make=concur|capture|clear|saveall|:Build:&Build,dmake install
-rebuild=concur|capture|clear|saveall|:Rebuild:&Rebuild,dmake cleanexe & dmake install -u
-debug=concur|capture|hide|savenone|:Debug:&Debug,
-execute=hide|savenone|nochangedir|:Execute:E&xecute,
-user1=hide|:User 1:User 1,
-user2=hide|:User 2:User 2,
-usertool_clean_directory=concur|capture|savenone|:Clean Directory:&Clean Directory,dmake cleanexe
-workingdir=.
-includedirs=%(SCITECH)\include;%(PRIVATE)\include
-reffile=
-[FILES]
-win32\_pmwin32.asm
-win32\cpuinfo.c
-win32\ddraw.c
-win32\event.c
-win32\oshdr.h
-win32\pm.c
-win32\vflat.c
-win32\ztimer.c
-[ASSOCIATION]
-[CONFIGURATIONS]
diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/_mtrrqnx.asm b/board/MAI/bios_emulator/scitech/src/pm/qnx/_mtrrqnx.asm
deleted file mode 100644
index 5a3fe105ec..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/qnx/_mtrrqnx.asm
+++ /dev/null
@@ -1,226 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Language: NASM
-;* Environment: QNX
-;*
-;* Description: Assembler support routines for the Memory Type Range Register
-;* (MTRR) module for QNX.
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac" ; Memory model macros
-
-header _mtrrqnx ; Set up memory model
-
-begdataseg _mtrrqnx ; Start of code segment
-
-ifdef USE_NASM
-%define R0_FLUSH_TLB 0
-%define R0_SAVE_CR4 1
-%define R0_RESTORE_CR4 2
-%define R0_READ_MSR 3
-%define R0_WRITE_MSR 4
-else
-R0_FLUSH_TLB EQU 0
-R0_SAVE_CR4 EQU 1
-R0_RESTORE_CR4 EQU 2
-R0_READ_MSR EQU 3
-R0_WRITE_MSR EQU 4
-endif
-
-cpublic _PM_R0
-_PM_R0_service dd 0
-_PM_R0_reg dd 0
-_PM_R0_eax dd 0
-_PM_R0_edx dd 0
-
-enddataseg _mtrrqnx ; Start of code segment
-
-begcodeseg _mtrrqnx ; Start of code segment
-
-P586
-
-;----------------------------------------------------------------------------
-; ulong _MTRR_disableInt(void);
-;----------------------------------------------------------------------------
-; Return processor interrupt status and disable interrupts.
-;----------------------------------------------------------------------------
-cprocstart _MTRR_disableInt
-
- pushfd ; Put flag word on stack
-; cli ; Disable interrupts!
- pop eax ; deposit flag word in return register
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _MTRR_restoreInt(ulong ps);
-;----------------------------------------------------------------------------
-; Restore processor interrupt status.
-;----------------------------------------------------------------------------
-cprocstart _MTRR_restoreInt
-
- ARG ps:ULONG
-
- push ebp
- mov ebp,esp ; Set up stack frame
- push [ULONG ps]
- popfd ; Restore processor status (and interrupts)
- pop ebp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uchar _MTRR_getCx86(uchar reg);
-;----------------------------------------------------------------------------
-; Read a Cyrix CPU indexed register
-;----------------------------------------------------------------------------
-cprocstart _MTRR_getCx86
-
- ARG reg:UCHAR
-
- enter_c
- mov al,[reg]
- out 22h,al
- in al,23h
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; uchar _MTRR_setCx86(uchar reg,uchar val);
-;----------------------------------------------------------------------------
-; Write a Cyrix CPU indexed register
-;----------------------------------------------------------------------------
-cprocstart _MTRR_setCx86
-
- ARG reg:UCHAR, val:UCHAR
-
- enter_c
- mov al,[reg]
- out 22h,al
- mov al,[val]
- out 23h,al
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; ulong _PM_ring0_isr(void);
-;----------------------------------------------------------------------------
-; Ring 0 clock interrupt handler that we use to execute the MTRR support
-; code.
-;----------------------------------------------------------------------------
-cprocnear _PM_ring0_isr
-
-;--------------------------------------------------------
-; void PM_flushTLB(void);
-;--------------------------------------------------------
- pushad
- cmp [DWORD _PM_R0_service],R0_FLUSH_TLB
- jne @@1
- wbinvd ; Flush the CPU cache
- mov eax,cr3
- mov cr3,eax ; Flush the TLB
- jmp @@Exit
-
-;--------------------------------------------------------
-; ulong _MTRR_saveCR4(void);
-;--------------------------------------------------------
-@@1: cmp [DWORD _PM_R0_service],R0_SAVE_CR4
- jne @@2
-
-; Save value of CR4 and clear Page Global Enable (bit 7)
-
- mov ebx,cr4
- mov eax,ebx
- and al,7Fh
- mov cr4,eax
-
-; Disable and flush caches
-
- mov eax,cr0
- or eax,40000000h
- wbinvd
- mov cr0,eax
- wbinvd
-
-; Return value from CR4
-
- mov [_PM_R0_reg],ebx
- jmp @@Exit
-
-;--------------------------------------------------------
-; void _MTRR_restoreCR4(ulong cr4Val)
-;--------------------------------------------------------
-@@2: cmp [DWORD _PM_R0_service],R0_RESTORE_CR4
- jne @@3
-
- mov eax,cr0
- and eax,0BFFFFFFFh
- mov cr0,eax
- mov eax,[_PM_R0_reg]
- mov cr4,eax
- jmp @@Exit
-
-;--------------------------------------------------------
-; void _MTRR_readMSR(int reg, ulong FAR *eax, ulong FAR *edx);
-;--------------------------------------------------------
-@@3: cmp [DWORD _PM_R0_service],R0_READ_MSR
- jne @@4
-
- mov ecx,[_PM_R0_reg]
- rdmsr
- mov [_PM_R0_eax],eax
- mov [_PM_R0_edx],edx
- jmp @@Exit
-
-;--------------------------------------------------------
-; void _MTRR_writeMSR(int reg, ulong eax, ulong edx);
-;--------------------------------------------------------
-@@4: cmp [DWORD _PM_R0_service],R0_WRITE_MSR
- jne @@Exit
-
- mov ecx,[_PM_R0_reg]
- mov eax,[_PM_R0_eax]
- mov edx,[_PM_R0_edx]
- wrmsr
- jmp @@Exit
-
-@@Exit: mov [DWORD _PM_R0_service],-1
- popad
- mov eax,0
- retf
-
-cprocend
-
-endcodeseg _mtrrqnx
-
- END ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/qnx/cpuinfo.c
deleted file mode 100644
index a8782542b2..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/qnx/cpuinfo.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: QNX
-*
-* Description: QNX specific code for the CPU detection module.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-TODO: We should implement this for QNX!
-****************************************************************************/
-#define SetMaxThreadPriority() 0
-
-/****************************************************************************
-REMARKS:
-TODO: We should implement this for QNX!
-****************************************************************************/
-#define RestoreThreadPriority(i)
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
- CPU_largeInteger *freq)
-{
- freq->low = CLOCKS_PER_SEC * 1000;
- freq->high = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-****************************************************************************/
-#define GetCounter(t) \
-{ \
- (t)->low = clock() * 1000; \
- (t)->high = 0; \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/event.c b/board/MAI/bios_emulator/scitech/src/pm/qnx/event.c
deleted file mode 100644
index 45cd514454..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/qnx/event.c
+++ /dev/null
@@ -1,601 +0,0 @@
-/****************************************************************************
-*
-* SciTech Multi-platform Graphics Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: QNX
-*
-* Description: QNX fullscreen console implementation for the SciTech
-* cross platform event library.
-*
-****************************************************************************/
-
-#include <errno.h>
-#include <unistd.h>
-
-/*--------------------------- Global variables ----------------------------*/
-
-#ifndef __QNXNTO__
-static struct _mouse_ctrl *_PM_mouse_ctl;
-static int _PM_keyboard_fd = -1;
-/*static int _PM_modifiers, _PM_leds; */
-#else
-static int kbd_fd = -1, mouse_fd = -1;
-#endif
-static int kill_pid = 0;
-static ushort keyUpMsg[256] = {0};/* Table of key up messages */
-static int rangeX,rangeY; /* Range of mouse coordinates */
-
-#define TIME_TO_MSEC(__t) ((__t).tv_nsec / 1000000 + (__t).tv_sec * 1000)
-
-#define LED_NUM 1
-#define LED_CAP 2
-#define LED_SCR 4
-
-/* Scancode mappings on QNX for special keys */
-
-typedef struct {
- int scan;
- int map;
- } keymap;
-
-/* TODO: Fix this and set it up so we can do a binary search! */
-
-keymap keymaps[] = {
- {96, KB_padEnter},
- {74, KB_padMinus},
- {78, KB_padPlus},
- {55, KB_padTimes},
- {98, KB_padDivide},
- {71, KB_padHome},
- {72, KB_padUp},
- {73, KB_padPageUp},
- {75, KB_padLeft},
- {76, KB_padCenter},
- {77, KB_padRight},
- {79, KB_padEnd},
- {80, KB_padDown},
- {81, KB_padPageDown},
- {82, KB_padInsert},
- {83, KB_padDelete},
- {105,KB_left},
- {108,KB_down},
- {106,KB_right},
- {103,KB_up},
- {110,KB_insert},
- {102,KB_home},
- {104,KB_pageUp},
- {111,KB_delete},
- {107,KB_end},
- {109,KB_pageDown},
- {125,KB_leftWindows},
- {126,KB_rightWindows},
- {127,KB_menu},
- {100,KB_rightAlt},
- {97,KB_rightCtrl},
- };
-
-/* And the keypad with num lock turned on (changes the ASCII code only) */
-
-keymap keypad[] = {
- {71, ASCII_7},
- {72, ASCII_8},
- {73, ASCII_9},
- {75, ASCII_4},
- {76, ASCII_5},
- {77, ASCII_6},
- {79, ASCII_1},
- {80, ASCII_2},
- {81, ASCII_3},
- {82, ASCII_0},
- {83, ASCII_period},
- };
-
-#define NB_KEYMAPS (sizeof(keymaps)/sizeof(keymaps[0]))
-#define NB_KEYPAD (sizeof(keypad)/sizeof(keypad[0]))
-
-/*---------------------------- Implementation -----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Include generic raw scancode keyboard module.
-****************************************************************************/
-#include "common/keyboard.c"
-
-/* These are not used under QNX */
-#define _EVT_disableInt() 1
-#define _EVT_restoreInt(flags)
-
-/****************************************************************************
-REMARKS:
-This function is used to return the number of ticks since system
-startup in milliseconds. This should be the same value that is placed into
-the time stamp fields of events, and is used to implement auto mouse down
-events.
-****************************************************************************/
-ulong _EVT_getTicks(void)
-{
- struct timespec t;
- clock_gettime(CLOCK_REALTIME,&t);
- return (t.tv_nsec / 1000000 + t.tv_sec * 1000);
-}
-
-/****************************************************************************
-REMARKS:
-Converts a mickey movement value to a pixel adjustment value.
-****************************************************************************/
-static int MickeyToPixel(
- int mickey)
-{
- /* TODO: We can add some code in here to handle 'acceleration' for */
- /* the mouse cursor. For now just use the mickeys. */
- return mickey;
-}
-
-#ifdef __QNXNTO__
-/****************************************************************************
-REMARKS:
-Retrieves all events from the mouse/keyboard event queue and stuffs them
-into the MGL event queue for further processing.
-****************************************************************************/
-static void _EVT_pumpMessages(void)
-{
- int rc1, rc2;
- struct _keyboard_packet key;
- struct _mouse_packet ms;
- static long old_buttons = 0;
- uint message = 0, but_stat = 0, mods = 0;
- event_t evt;
-
- while (EVT.count < EVENTQSIZE) {
- rc1 = read(kbd_fd, (void *)&key, sizeof(key));
- if (rc1 == -1) {
- if (errno == EAGAIN)
- rc1 = 0;
- else {
- perror("getEvents");
- PM_fatalError("Keyboard error");
- }
- }
- if (rc1 > 0) {
- memset(&evt, 0, sizeof(evt));
- if (key.data.modifiers & KEYMOD_SHIFT)
- mods |= EVT_LEFTSHIFT;
- if (key.data.modifiers & KEYMOD_CTRL)
- mods |= EVT_CTRLSTATE;
- if (key.data.modifiers & KEYMOD_ALT)
- mods |= EVT_ALTSTATE;
-
- /* Now store the keyboard event data */
- evt.when = TIME_TO_MSEC(key.time);
- if (key.data.flags & KEY_SCAN_VALID)
- evt.message |= (key.data.key_scan & 0x7F) << 8;
- if ((key.data.flags & KEY_SYM_VALID) &&
- (((key.data.key_sym & 0xff00) == 0xf000 &&
- (key.data.key_sym & 0xff) < 0x20) ||
- key.data.key_sym < 0x80))
- evt.message |= (key.data.key_sym & 0xFF);
- evt.modifiers = mods;
- if (key.data.flags & KEY_DOWN) {
- evt.what = EVT_KEYDOWN;
- keyUpMsg[evt.message >> 8] = (ushort)evt.message;
- }
- else if (key.data.flags & KEY_REPEAT) {
- evt.message |= 0x10000;
- evt.what = EVT_KEYREPEAT;
- }
- else {
- evt.what = EVT_KEYUP;
- evt.message = keyUpMsg[evt.message >> 8];
- if (evt.message == 0)
- continue;
- keyUpMsg[evt.message >> 8] = 0;
- }
-
- /* Now add the new event to the event queue */
- addEvent(&evt);
- }
- rc2 = read(mouse_fd, (void *)&ms, sizeof (ms));
- if (rc2 == -1) {
- if (errno == EAGAIN)
- rc2 = 0;
- else {
- perror("getEvents");
- PM_fatalError("Mouse error");
- }
- }
- if (rc2 > 0) {
- memset(&evt, 0, sizeof(evt));
- ms.hdr.buttons &=
- (_POINTER_BUTTON_LEFT | _POINTER_BUTTON_RIGHT);
- if (ms.hdr.buttons & _POINTER_BUTTON_LEFT)
- but_stat = EVT_LEFTBUT;
- if ((ms.hdr.buttons & _POINTER_BUTTON_LEFT) !=
- (old_buttons & _POINTER_BUTTON_LEFT))
- message = EVT_LEFTBMASK;
- if (ms.hdr.buttons & _POINTER_BUTTON_RIGHT)
- but_stat |= EVT_RIGHTBUT;
- if ((ms.hdr.buttons & _POINTER_BUTTON_RIGHT) !=
- (old_buttons & _POINTER_BUTTON_RIGHT))
- message |= EVT_RIGHTBMASK;
- if (ms.dx || ms.dy) {
- ms.dy = -ms.dy;
- EVT.mx += MickeyToPixel(ms.dx);
- EVT.my += MickeyToPixel(ms.dy);
- if (EVT.mx < 0) EVT.mx = 0;
- if (EVT.my < 0) EVT.my = 0;
- if (EVT.mx > rangeX) EVT.mx = rangeX;
- if (EVT.my > rangeY) EVT.my = rangeY;
- evt.what = EVT_MOUSEMOVE;
- evt.when = TIME_TO_MSEC(ms.hdr.time);
- evt.where_x = EVT.mx;
- evt.where_y = EVT.my;
- evt.relative_x = ms.dx;
- evt.relative_y = ms.dy;
- evt.modifiers = but_stat;
- addEvent(&evt);
- }
- evt.what = ms.hdr.buttons < old_buttons ?
- EVT_MOUSEUP : EVT_MOUSEDOWN;
- evt.when = TIME_TO_MSEC(ms.hdr.time);
- evt.where_x = EVT.mx;
- evt.where_y = EVT.my;
- evt.relative_x = ms.dx;
- evt.relative_y = ms.dy;
- evt.modifiers = but_stat;
- evt.message = message;
- if (ms.hdr.buttons != old_buttons) {
- addEvent(&evt);
- old_buttons = ms.hdr.buttons;
- }
- }
- if (rc1 + rc2 == 0)
- break;
- }
-}
-#else
-/****************************************************************************
-REMARKS:
-Retrieves all events from the mouse/keyboard event queue and stuffs them
-into the MGL event queue for further processing.
-****************************************************************************/
-static void _EVT_pumpMessages(void)
-{
- struct mouse_event ev;
- int rc;
- static long old_buttons = 0;
- uint message = 0, but_stat = 0;
- event_t evt;
- char buf[32];
- int numkeys, i;
-
- /* Poll keyboard events */
- while ((numkeys = read(_PM_keyboard_fd, buf, sizeof buf)) > 0) {
- for (i = 0; i < numkeys; i++) {
- processRawScanCode(buf[i]);
- }
- }
-
- if (_PM_mouse_ctl == NULL)
- return;
-
- /* Gobble pending mouse events */
- while (EVT.count < EVENTQSIZE) {
- rc = mouse_read(_PM_mouse_ctl, &ev, 1, 0, NULL);
- if (rc == -1) {
- perror("getEvents");
- PM_fatalError("Mouse error (Input terminated?)");
- }
- if (rc == 0)
- break;
-
- message = 0, but_stat = 0;
- memset(&evt, 0, sizeof(evt));
-
- ev.buttons &= (_MOUSE_LEFT | _MOUSE_RIGHT);
- if (ev.buttons & _MOUSE_LEFT)
- but_stat = EVT_LEFTBUT;
- if ((ev.buttons & _MOUSE_LEFT) != (old_buttons & _MOUSE_LEFT))
- message = EVT_LEFTBMASK;
- if (ev.buttons & _MOUSE_RIGHT)
- but_stat |= EVT_RIGHTBUT;
- if ((ev.buttons & _MOUSE_RIGHT) != (old_buttons & _MOUSE_RIGHT))
- message |= EVT_RIGHTBMASK;
- if (ev.dx || ev.dy) {
- ev.dy = -ev.dy;
- EVT.mx += MickeyToPixel(ev.dx);
- EVT.my += MickeyToPixel(ev.dy);
- if (EVT.mx < 0) EVT.mx = 0;
- if (EVT.my < 0) EVT.my = 0;
- if (EVT.mx > rangeX) EVT.mx = rangeX;
- if (EVT.my > rangeY) EVT.my = rangeY;
- evt.what = EVT_MOUSEMOVE;
- evt.when = ev.timestamp*100;
- evt.where_x = EVT.mx;
- evt.where_y = EVT.my;
- evt.relative_x = ev.dx;
- evt.relative_y = ev.dy;
- evt.modifiers = but_stat;
- addEvent(&evt);
- }
- evt.what = ev.buttons < old_buttons ? EVT_MOUSEUP : EVT_MOUSEDOWN;
- evt.when = ev.timestamp*100;
- evt.where_x = EVT.mx;
- evt.where_y = EVT.my;
- evt.relative_x = ev.dx;
- evt.relative_y = ev.dy;
- evt.modifiers = but_stat;
- evt.message = message;
- if (ev.buttons != old_buttons) {
- addEvent(&evt);
- old_buttons = ev.buttons;
- }
- }
-}
-#endif /* __QNXNTO__ */
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-****************************************************************************/
-#define _EVT_maskKeyCode(evt)
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort(
- int signo)
-{
- char buf[80];
-
- EVT_exit();
- sprintf(buf,"Terminating on signal %d",signo);
- PM_fatalError(buf);
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
- _EVT_mouseMoveHandler mouseMove)
-{
- int i;
- struct stat st;
- char *iarg[16];
-#ifdef __QNXNTO__
- char buf[128];
- FILE *p;
- int argno,len;
-#endif
-
-#ifdef __QNXNTO__
- ThreadCtl(_NTO_TCTL_IO, 0); /* So joystick code won't blow up */
-#endif
-
- /* Initialise the event queue */
- EVT.mouseMove = mouseMove;
- initEventQueue();
- memset(keyUpMsg,0,sizeof(keyUpMsg));
-
-#ifdef __QNXNTO__
- /*
- * User may already have input running with the right parameters.
- * Thus they could start input at boot time, using the output of
- * inputtrap, passing the the -r flag to make it run as a resource
- * manager.
- */
- if ((mouse_fd = open("/dev/mouse0", O_RDONLY | O_NONBLOCK)) < 0) {
- /* Run inputtrap to get the args for input */
- if ((p = popen("inputtrap", "r")) == NULL)
- PM_fatalError("Error running 'inputtrap'");
- fgets(buf, sizeof(buf), p);
- pclose(p);
-
- /* Build the argument list */
- len = strlen(buf);
- iarg[0] = buf;
- for (i = 0, argno = 0; i < len && argno < 15;) {
- if (argno == 1) {
- /*
- * Add flags to input's arg list.
- * '-r' means run as resource
- * manager, providing the /dev/mouse
- * and /dev/keyboard interfaces.
- * '-P' supresses the /dev/photon
- * mechanism.
- */
- iarg[argno++] = "-Pr";
- continue;
- }
- while (buf[i] == ' ')
- i++;
- if (buf[i] == '\0' || buf[i] == '\n')
- break;
- iarg[argno++] = &buf[i];
- while (buf[i] != ' '
- && buf[i] != '\0' && buf[i] != '\n')
- i++;
- buf[i++] = '\0';
- }
- iarg[argno] = NULL;
-
- if ((kill_pid = spawnvp(P_NOWAITO, iarg[0], iarg)) == -1) {
- perror("spawning input resmgr");
- PM_fatalError("Could not start input resmgr");
- }
- for (i = 0; i < 10; i++) {
- if (stat("/dev/mouse0", &st) == 0)
- break;
- sleep(1);
- }
- if ((mouse_fd = open("/dev/mouse0", O_RDONLY|O_NONBLOCK)) < 0) {
- perror("/dev/mouse0");
- PM_fatalError("Could not open /dev/mouse0");
- }
- }
- if ((kbd_fd = open("/dev/keyboard0", O_RDONLY|O_NONBLOCK)) < 0) {
- perror("/dev/keyboard0");
- PM_fatalError("Could not open /dev/keyboard0");
- }
-#else
- /* Connect to Input/Mouse for event handling */
- if (_PM_mouse_ctl == NULL) {
- _PM_mouse_ctl = mouse_open(0, "/dev/mouse", 0);
-
- /* "Mouse" is not running; attempt to start it */
- if (_PM_mouse_ctl == NULL) {
- iarg[0] = "mousetrap";
- iarg[1] = "start";
- iarg[2] = NULL;
- if ((kill_pid = spawnvp(P_NOWAITO, iarg[0], (void*)iarg)) == -1)
- perror("spawn (mousetrap)");
- else {
- for (i = 0; i < 10; i++) {
- if (stat("/dev/mouse", &st) == 0)
- break;
- sleep(1);
- }
- _PM_mouse_ctl = mouse_open(0, "/dev/mouse", 0);
- }
- }
- }
- if (_PM_keyboard_fd == -1)
- _PM_keyboard_fd = open("/dev/kbd", O_RDONLY|O_NONBLOCK);
-#endif
-
- /* Catch program termination signals so we can clean up properly */
- signal(SIGABRT, _EVT_abort);
- signal(SIGFPE, _EVT_abort);
- signal(SIGINT, _EVT_abort);
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
- int xRes,
- int yRes)
-{
- rangeX = xRes;
- rangeY = yRes;
-}
-
-/****************************************************************************
-REMARKS
-Modifes the mouse coordinates as necessary if scaling to OS coordinates,
-and sets the OS mouse cursor position.
-****************************************************************************/
-#define _EVT_setMousePos(x,y)
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVT_resume(void)
-{
- /* Do nothing for QNX */
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVT_suspend(void)
-{
- /* Do nothing for QNX */
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVT_exit(void)
-{
-#ifdef __QNXNTO__
- char c;
- int flags;
-
- if (kbd_fd != -1) {
- close(kbd_fd);
- kbd_fd = -1;
- }
- if (mouse_fd != -1) {
- close(mouse_fd);
- mouse_fd = -1;
- }
-#endif
-
- /* Restore signal handlers */
- signal(SIGABRT, SIG_DFL);
- signal(SIGFPE, SIG_DFL);
- signal(SIGINT, SIG_DFL);
-
-#ifndef __QNXNTO__
- /* Kill the Input/Mouse driver if we have spawned it */
- if (_PM_mouse_ctl != NULL) {
- struct _fd_entry fde;
- uint pid = 0;
-
- /* Find out the pid of the mouse driver */
- if (kill_pid > 0) {
- if (qnx_fd_query(0,
- 0, _PM_mouse_ctl->fd, &fde) != -1)
- pid = fde.pid;
- }
- mouse_close(_PM_mouse_ctl);
- _PM_mouse_ctl = NULL;
-
- if (pid > 0) {
- /* For some reasons the PID's are different under QNX4,
- * so we use the old mechanism to kill the mouse server.
- */
- kill(pid, SIGTERM);
- kill_pid = 0;
- }
- }
-#endif
- if (kill_pid > 0) {
- kill(kill_pid, SIGTERM);
- kill_pid = 0;
- }
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/mtrrqnx.c b/board/MAI/bios_emulator/scitech/src/pm/qnx/mtrrqnx.c
deleted file mode 100644
index f960c75714..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/qnx/mtrrqnx.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: QNX
-*
-* Description: MTRR helper functions module. To make it easier to implement
-* the MTRR support under QNX, we simply put our ring 0 helper
-* functions into stubs that run them at ring 0 using whatever
-* mechanism is available.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include <stdio.h>
-#include <sys/mman.h>
-#include <time.h>
-#ifdef __QNXNTO__
-#include <sys/neutrino.h>
-#include <sys/syspage.h>
-#else
-#include <i86.h>
-#include <sys/irqinfo.h>
-#endif
-
-/*--------------------------- Global variables ----------------------------*/
-
-#define R0_FLUSH_TLB 0
-#define R0_SAVE_CR4 1
-#define R0_RESTORE_CR4 2
-#define R0_READ_MSR 3
-#define R0_WRITE_MSR 4
-
-typedef struct {
- int service;
- int reg;
- ulong eax;
- ulong edx;
- } R0_data;
-
-extern volatile R0_data _PM_R0;
-
-/*----------------------------- Implementation ----------------------------*/
-
-#ifdef __QNXNTO__
-const struct sigevent * _ASMAPI _PM_ring0_isr(void *arg, int id);
-#else
-pid_t far _ASMAPI _PM_ring0_isr();
-#endif
-
-/****************************************************************************
-REMARKS:
-Return true if ring 0 (or if we can call the helpers functions at ring 0)
-****************************************************************************/
-ibool _ASMAPI _MTRR_isRing0(void)
-{
-#ifdef __QNXNTO__
- return false; /* Not implemented yet! */
-#else
- return true;
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Function to execute a service at ring 0. This is done using the clock
-interrupt handler since the code we attach to it will always run at ring 0.
-****************************************************************************/
-static void CallRing0(void)
-{
-#ifdef __QNXNTO__
- uint clock_intno = SYSPAGE_ENTRY(qtime)->intr;
-#else
- uint clock_intno = 0; /* clock irq */
-#endif
- int intrid;
-
-#ifdef __QNXNTO__
- mlock((void*)&_PM_R0, sizeof(_PM_R0));
- ThreadCtl(_NTO_TCTL_IO, 0);
-#endif
-#ifdef __QNXNTO__
- if ((intrid = InterruptAttach(_NTO_INTR_CLASS_EXTERNAL | clock_intno,
- _PM_ring0_isr, (void*)&_PM_R0, sizeof(_PM_R0), _NTO_INTR_FLAGS_END)) == -1) {
-#else
- if ((intrid = qnx_hint_attach(clock_intno, _PM_ring0_isr, FP_SEG(&_PM_R0))) == -1) {
-#endif
- perror("Attach");
- exit(-1);
- }
- while (_PM_R0.service != -1)
- ;
-#ifdef __QNXNTO__
- InterruptDetachId(intrid);
-#else
- qnx_hint_detach(intrid);
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Flush the translation lookaside buffer.
-****************************************************************************/
-void PMAPI PM_flushTLB(void)
-{
- _PM_R0.service = R0_FLUSH_TLB;
- CallRing0();
-}
-
-/****************************************************************************
-REMARKS:
-Read and return the value of the CR4 register
-****************************************************************************/
-ulong _ASMAPI _MTRR_saveCR4(void)
-{
- _PM_R0.service = R0_SAVE_CR4;
- CallRing0();
- return _PM_R0.reg;
-}
-
-/****************************************************************************
-REMARKS:
-Restore the value of the CR4 register
-****************************************************************************/
-void _ASMAPI _MTRR_restoreCR4(ulong cr4Val)
-{
- _PM_R0.service = R0_RESTORE_CR4;
- _PM_R0.reg = cr4Val;
- CallRing0();
-}
-
-/****************************************************************************
-REMARKS:
-Read a machine status register for the CPU.
-****************************************************************************/
-void _ASMAPI _MTRR_readMSR(
- int reg,
- ulong *eax,
- ulong *edx)
-{
- _PM_R0.service = R0_READ_MSR;
- _PM_R0.reg = reg;
- CallRing0();
- *eax = _PM_R0.eax;
- *edx = _PM_R0.edx;
-}
-
-/****************************************************************************
-REMARKS:
-Write a machine status register for the CPU.
-****************************************************************************/
-void _ASMAPI _MTRR_writeMSR(
- int reg,
- ulong eax,
- ulong edx)
-{
- _PM_R0.service = R0_WRITE_MSR;
- _PM_R0.reg = reg;
- _PM_R0.eax = eax;
- _PM_R0.edx = edx;
- CallRing0();
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/qnx/oshdr.h
deleted file mode 100644
index 0961193049..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/qnx/oshdr.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/****************************************************************************
-*
-* SciTech Multi-platform Graphics Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: QNX
-*
-* Description: Include file to include all OS specific header files.
-*
-****************************************************************************/
-
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <process.h>
-#include <time.h>
-#ifndef __QNXNTO__
-#include <sys/mouse.h>
-#include <sys/keyboard.h>
-#include <sys/fd.h>
-#include <conio.h>
-#else
-#include <sys/dcmd_input.h>
-
-/* Things 'borrowed' from photon/keycodes.h */
-
-/*
- * Keyboard modifiers
- */
-#define KEYMODBIT_SHIFT 0
-#define KEYMODBIT_CTRL 1
-#define KEYMODBIT_ALT 2
-#define KEYMODBIT_ALTGR 3
-#define KEYMODBIT_SHL3 4
-#define KEYMODBIT_MOD6 5
-#define KEYMODBIT_MOD7 6
-#define KEYMODBIT_MOD8 7
-
-#define KEYMODBIT_SHIFT_LOCK 8
-#define KEYMODBIT_CTRL_LOCK 9
-#define KEYMODBIT_ALT_LOCK 10
-#define KEYMODBIT_ALTGR_LOCK 11
-#define KEYMODBIT_SHL3_LOCK 12
-#define KEYMODBIT_MOD6_LOCK 13
-#define KEYMODBIT_MOD7_LOCK 14
-#define KEYMODBIT_MOD8_LOCK 15
-
-#define KEYMODBIT_CAPS_LOCK 16
-#define KEYMODBIT_NUM_LOCK 17
-#define KEYMODBIT_SCROLL_LOCK 18
-
-#define KEYMOD_SHIFT (1 << KEYMODBIT_SHIFT)
-#define KEYMOD_CTRL (1 << KEYMODBIT_CTRL)
-#define KEYMOD_ALT (1 << KEYMODBIT_ALT)
-#define KEYMOD_ALTGR (1 << KEYMODBIT_ALTGR)
-#define KEYMOD_SHL3 (1 << KEYMODBIT_SHL3)
-#define KEYMOD_MOD6 (1 << KEYMODBIT_MOD6)
-#define KEYMOD_MOD7 (1 << KEYMODBIT_MOD7)
-#define KEYMOD_MOD8 (1 << KEYMODBIT_MOD8)
-
-#define KEYMOD_SHIFT_LOCK (1 << KEYMODBIT_SHIFT_LOCK)
-#define KEYMOD_CTRL_LOCK (1 << KEYMODBIT_CTRL_LOCK)
-#define KEYMOD_ALT_LOCK (1 << KEYMODBIT_ALT_LOCK)
-#define KEYMOD_ALTGR_LOCK (1 << KEYMODBIT_ALTGR_LOCK)
-#define KEYMOD_SHL3_LOCK (1 << KEYMODBIT_SHL3_LOCK)
-#define KEYMOD_MOD6_LOCK (1 << KEYMODBIT_MOD6_LOCK)
-#define KEYMOD_MOD7_LOCK (1 << KEYMODBIT_MOD7_LOCK)
-#define KEYMOD_MOD8_LOCK (1 << KEYMODBIT_MOD8_LOCK)
-
-#define KEYMOD_CAPS_LOCK (1 << KEYMODBIT_CAPS_LOCK)
-#define KEYMOD_NUM_LOCK (1 << KEYMODBIT_NUM_LOCK)
-#define KEYMOD_SCROLL_LOCK (1 << KEYMODBIT_SCROLL_LOCK)
-
-/*
- * Keyboard flags
- */
-#define KEY_DOWN 0x00000001 /* Key was pressed down */
-#define KEY_REPEAT 0x00000002 /* Key was repeated */
-#define KEY_SCAN_VALID 0x00000020 /* Scancode is valid */
-#define KEY_SYM_VALID 0x00000040 /* Key symbol is valid */
-#define KEY_CAP_VALID 0x00000080 /* Key cap is valid */
-#define KEY_DEAD 0x40000000 /* Key symbol is a DEAD key */
-#define KEY_OEM_CAP 0x80000000 /* Key cap is an OEM scan code from keyboard */
-
-#endif /* __QNXNTO__ */
diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/pm.c b/board/MAI/bios_emulator/scitech/src/pm/qnx/pm.c
deleted file mode 100644
index c993ee0837..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/qnx/pm.c
+++ /dev/null
@@ -1,891 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: QNX
-*
-* Description: Implementation for the OS Portability Manager Library, which
-* contains functions to implement OS specific services in a
-* generic, cross platform API. Porting the OS Portability
-* Manager library is the first step to porting any SciTech
-* products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "mtrr.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <time.h>
-#include <unistd.h>
-#include <termios.h>
-#include <fcntl.h>
-#include <malloc.h>
-#include <sys/mman.h>
-#include "qnx/vbios.h"
-#ifndef __QNXNTO__
-#include <sys/seginfo.h>
-#include <sys/console.h>
-#include <conio.h>
-#include <i86.h>
-#else
-#include <sys/neutrino.h>
-#include <sys/dcmd_chr.h>
-#endif
-
-/*--------------------------- Global variables ----------------------------*/
-
-static uint VESABuf_len = 1024; /* Length of the VESABuf buffer */
-static void *VESABuf_ptr = NULL; /* Near pointer to VESABuf */
-static uint VESABuf_rseg; /* Real mode segment of VESABuf */
-static uint VESABuf_roff; /* Real mode offset of VESABuf */
-static VBIOSregs_t *VRegs = NULL; /* Pointer to VBIOS registers */
-static int raw_count = 0;
-static struct _console_ctrl *cc = NULL;
-static int console_count = 0;
-static int rmbuf_inuse = 0;
-
-static void (PMAPIP fatalErrorCleanup)(void) = NULL;
-
-/*----------------------------- Implementation ----------------------------*/
-
-void PMAPI PM_init(void)
-{
- char *force;
-
- if (VRegs == NULL) {
-#ifdef __QNXNTO__
- ThreadCtl(_NTO_TCTL_IO, 0); /* Get IO privilidge */
-#endif
- force = getenv("VBIOS_METHOD");
- VRegs = VBIOSinit(force ? atoi(force) : 0);
- }
-#ifndef __QNXNTO__
- MTRR_init();
-#endif
-}
-
-ibool PMAPI PM_haveBIOSAccess(void)
-{ return VRegs != NULL; }
-
-long PMAPI PM_getOSType(void)
-{ return _OS_QNX; }
-
-int PMAPI PM_getModeType(void)
-{ return PM_386; }
-
-void PMAPI PM_backslash(char *s)
-{
- uint pos = strlen(s);
- if (s[pos-1] != '/') {
- s[pos] = '/';
- s[pos+1] = '\0';
- }
-}
-
-void PMAPI PM_setFatalErrorCleanup(
- void (PMAPIP cleanup)(void))
-{
- fatalErrorCleanup = cleanup;
-}
-
-void PMAPI PM_fatalError(const char *msg)
-{
- if (fatalErrorCleanup)
- fatalErrorCleanup();
- fprintf(stderr,"%s\n", msg);
- exit(1);
-}
-
-static void ExitVBEBuf(void)
-{
- if (VESABuf_ptr)
- PM_freeRealSeg(VESABuf_ptr);
- VESABuf_ptr = 0;
-}
-
-void * PMAPI PM_getVESABuf(uint *len,uint *rseg,uint *roff)
-{
- if (!VESABuf_ptr) {
- /* Allocate a global buffer for communicating with the VESA VBE */
- if ((VESABuf_ptr = PM_allocRealSeg(VESABuf_len, &VESABuf_rseg, &VESABuf_roff)) == NULL)
- return NULL;
- atexit(ExitVBEBuf);
- }
- *len = VESABuf_len;
- *rseg = VESABuf_rseg;
- *roff = VESABuf_roff;
- return VESABuf_ptr;
-}
-
-static int term_raw(void)
-{
- struct termios termios_p;
-
- if (raw_count++ > 0)
- return 0;
-
- /* Go into "raw" input mode */
- if (tcgetattr(STDIN_FILENO, &termios_p))
- return -1;
-
- termios_p.c_cc[VMIN] = 1;
- termios_p.c_cc[VTIME] = 0;
- termios_p.c_lflag &= ~( ECHO|ICANON|ISIG|ECHOE|ECHOK|ECHONL);
- tcsetattr(STDIN_FILENO, TCSADRAIN, &termios_p);
- return 0;
-}
-
-static void term_restore(void)
-{
- struct termios termios_p;
-
- if (raw_count-- != 1)
- return;
-
- tcgetattr(STDIN_FILENO, &termios_p);
- termios_p.c_lflag |= (ECHO|ICANON|ISIG|ECHOE|ECHOK|ECHONL);
- termios_p.c_oflag |= (OPOST);
- tcsetattr(STDIN_FILENO, TCSADRAIN, &termios_p);
-}
-
-int PMAPI PM_kbhit(void)
-{
- int blocking, c;
-
- if (term_raw() == -1)
- return 0;
-
- /* Go into non blocking mode */
- blocking = fcntl(STDIN_FILENO, F_GETFL) | O_NONBLOCK;
- fcntl(STDIN_FILENO, F_SETFL, blocking);
- c = getc(stdin);
-
- /* restore blocking mode */
- fcntl(STDIN_FILENO, F_SETFL, blocking & ~O_NONBLOCK);
- term_restore();
- if (c != EOF) {
- ungetc(c, stdin);
- return c;
- }
- clearerr(stdin);
- return 0;
-}
-
-int PMAPI PM_getch(void)
-{
- int c;
-
- if (term_raw() == -1)
- return (0);
- c = getc(stdin);
-#if defined(__QNX__) && !defined(__QNXNTO__)
- if (c == 0xA)
- c = 0x0D;
- else if (c == 0x7F)
- c = 0x08;
-#endif
- term_restore();
- return c;
-}
-
-PM_HWND PMAPI PM_openConsole(
- PM_HWND hwndUser,
- int device,
- int xRes,
- int yRes,
- int bpp,
- ibool fullScreen)
-{
-#ifndef __QNXNTO__
- int fd;
-
- if (console_count++)
- return 0;
- if ((fd = open("/dev/con1", O_RDWR)) == -1)
- return -1;
- cc = console_open(fd, O_RDWR);
- close(fd);
- if (cc == NULL)
- return -1;
-#endif
- return 1;
-}
-
-int PMAPI PM_getConsoleStateSize(void)
-{
- return PM_getVGAStateSize() + sizeof(int) * 3;
-}
-
-void PMAPI PM_saveConsoleState(void *stateBuf,int console_id)
-{
-#ifdef __QNXNTO__
- int fd;
- int flags;
-
- if ((fd = open("/dev/con1", O_RDWR)) == -1)
- return;
- flags = _CONCTL_INVISIBLE_CHG | _CONCTL_INVISIBLE;
- devctl(fd, DCMD_CHR_SERCTL, &flags, sizeof flags, 0);
- close(fd);
-#else
- uchar *buf = &((uchar*)stateBuf)[PM_getVGAStateSize()];
-
- /* Save QNX 4 console state */
- console_read(cc, -1, 0, NULL, 0,
- (int *)buf+1, (int *)buf+2, NULL);
- *(int *)buf = console_ctrl(cc, -1,
- CONSOLE_NORESIZE | CONSOLE_NOSWITCH | CONSOLE_INVISIBLE,
- CONSOLE_NORESIZE | CONSOLE_NOSWITCH | CONSOLE_INVISIBLE);
-
- /* Save state of VGA registers */
- PM_saveVGAState(stateBuf);
-#endif
-}
-
-void PMAPI PM_setSuspendAppCallback(int (_ASMAPIP saveState)(int flags))
-{
- /* TODO: Implement support for console switching if possible */
-}
-
-void PMAPI PM_restoreConsoleState(const void *stateBuf,PM_HWND hwndConsole)
-{
-#ifdef __QNXNTO__
- int fd;
- int flags;
-
- if ((fd = open("/dev/con1", O_RDWR)) == -1)
- return;
- flags = _CONCTL_INVISIBLE_CHG;
- devctl(fd, DCMD_CHR_SERCTL, &flags, sizeof flags, 0);
- close(fd);
-#else
- uchar *buf = &((uchar*)stateBuf)[PM_getVGAStateSize()];
-
- /* Restore the state of the VGA compatible registers */
- PM_restoreVGAState(stateBuf);
-
- /* Restore QNX 4 console state */
- console_ctrl(cc, -1, *(int *)buf,
- CONSOLE_NORESIZE | CONSOLE_NOSWITCH | CONSOLE_INVISIBLE);
- console_write(cc, -1, 0, NULL, 0,
- (int *)buf+1, (int *)buf+2, NULL);
-#endif
-}
-
-void PMAPI PM_closeConsole(PM_HWND hwndConsole)
-{
-#ifndef __QNXNTO__
- if (--console_count == 0) {
- console_close(cc);
- cc = NULL;
- }
-#endif
-}
-
-void PM_setOSCursorLocation(int x,int y)
-{
- if (!cc)
- return;
-#ifndef __QNXNTO__
- console_write(cc, -1, 0, NULL, 0, &y, &x, NULL);
-#endif
-}
-
-void PM_setOSScreenWidth(int width,int height)
-{
-}
-
-ibool PMAPI PM_setRealTimeClockHandler(PM_intHandler ih, int frequency)
-{
- /* TODO: Implement this for QNX */
- return false;
-}
-
-void PMAPI PM_setRealTimeClockFrequency(int frequency)
-{
- /* TODO: Implement this for QNX */
-}
-
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
- /* TODO: Implement this for QNX */
-}
-
-char * PMAPI PM_getCurrentPath(
- char *path,
- int maxLen)
-{
- return getcwd(path,maxLen);
-}
-
-char PMAPI PM_getBootDrive(void)
-{ return '/'; }
-
-const char * PMAPI PM_getVBEAFPath(void)
-{ return PM_getNucleusConfigPath(); }
-
-const char * PMAPI PM_getNucleusPath(void)
-{
- char *env = getenv("NUCLEUS_PATH");
-#ifdef __QNXNTO__
-#ifdef __X86__
- return env ? env : "/nto/scitech/x86/bin";
-#elif defined (__PPC__)
- return env ? env : "/nto/scitech/ppcbe/bin";
-#elif defined (__MIPS__)
-#ifdef __BIGENDIAN__
- return env ? env : "/nto/scitech/mipsbe/bin";
-#else
- return env ? env : "/nto/scitech/mipsle/bin";
-#endif
-#elif defined (__SH__)
-#ifdef __BIGENDIAN__
- return env ? env : "/nto/scitech/shbe/bin";
-#else
- return env ? env : "/nto/scitech/shle/bin";
-#endif
-#elif defined (__ARM__)
- return env ? env : "/nto/scitech/armle/bin";
-#endif
-#else /* QNX 4 */
- return env ? env : "/qnx4/scitech/bin";
-#endif
-}
-
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
- static char path[512];
- char *env;
-#ifdef __QNXNTO__
- char temp[64];
- gethostname(temp, sizeof (temp));
- temp[sizeof (temp) - 1] = '\0'; /* Paranoid */
- sprintf(path,"/etc/config/scitech/%s/config", temp);
-#else
- sprintf(path,"/etc/config/scitech/%d/config", getnid());
-#endif
- if ((env = getenv("NUCLEUS_PATH")) != NULL) {
- strcpy(path,env);
- PM_backslash(path);
- strcat(path,"config");
- }
- return path;
-}
-
-const char * PMAPI PM_getUniqueID(void)
-{
- static char buf[128];
-#ifdef __QNXNTO__
- gethostname(buf, sizeof (buf));
-#else
- sprintf(buf,"node%d", getnid());
-#endif
- return buf;
-}
-
-const char * PMAPI PM_getMachineName(void)
-{
- static char buf[128];
-#ifdef __QNXNTO__
- gethostname(buf, sizeof (buf));
-#else
- sprintf(buf,"node%d", getnid());
-#endif
- return buf;
-}
-
-void * PMAPI PM_getBIOSPointer(void)
-{
- return PM_mapRealPointer(0, 0x400);
-}
-
-void * PMAPI PM_getA0000Pointer(void)
-{
- static void *ptr = NULL;
- void *freeptr;
- unsigned offset, i, maplen;
-
- if (ptr != NULL)
- return ptr;
-
- /* Some trickery is required to get the linear address 64K aligned */
- for (i = 0; i < 5; i++) {
- ptr = PM_mapPhysicalAddr(0xA0000,0xFFFF,true);
- offset = 0x10000 - ((unsigned)ptr % 0x10000);
- if (!offset)
- break;
- munmap(ptr, 0x10000);
- maplen = 0x10000 + offset;
- freeptr = PM_mapPhysicalAddr(0xA0000-offset, maplen-1,true);
- ptr = (void *)(offset + (unsigned)freeptr);
- if (0x10000 - ((unsigned)ptr % 0x10000))
- break;
- munmap(freeptr, maplen);
- }
- if (i == 5) {
- printf("Could not get a 64K aligned linear address for A0000 region\n");
- exit(1);
- }
- return ptr;
-}
-
-void * PMAPI PM_mapPhysicalAddr(ulong base,ulong limit,ibool isCached)
-{
- uchar_t *p;
- unsigned o;
- unsigned prot = PROT_READ|PROT_WRITE|(isCached?0:PROT_NOCACHE);
-#ifdef __PAGESIZE
- int pagesize = __PAGESIZE;
-#else
- int pagesize = 4096;
-#endif
- int rounddown = base % pagesize;
-#ifndef __QNXNTO__
- static int __VidFD = -1;
-#endif
-
- if (rounddown) {
- if (base < rounddown)
- return NULL;
- base -= rounddown;
- limit += rounddown;
- }
-
-#ifndef __QNXNTO__
- if (__VidFD < 0) {
- if ((__VidFD = shm_open( "Physical", O_RDWR, 0777 )) == -1) {
- perror( "Cannot open Physical memory" );
- exit(1);
- }
- }
- o = base & 0xFFF;
- limit = (limit + o + 0xFFF) & ~0xFFF;
- if ((int)(p = mmap( 0, limit, prot, MAP_SHARED,
- __VidFD, base )) == -1 ) {
- return NULL;
- }
- p += o;
-#else
- if ((p = mmap(0, limit, prot, MAP_PHYS | MAP_SHARED,
- NOFD, base)) == MAP_FAILED) {
- return (void *)-1;
- }
-#endif
- return (p + rounddown);
-}
-
-void PMAPI PM_freePhysicalAddr(void *ptr,ulong limit)
-{
- munmap(ptr,limit+1);
-}
-
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{
- /* TODO: This function should find the physical address of a linear */
- /* address. */
- return 0xFFFFFFFFUL;
-}
-
-ibool PMAPI PM_getPhysicalAddrRange(
- void *p,
- ulong length,
- ulong *physAddress)
-{
- /* TODO: Implement this! */
- return false;
-}
-
-void PMAPI PM_sleep(ulong milliseconds)
-{
- /* TODO: Put the process to sleep for milliseconds */
-}
-
-int PMAPI PM_getCOMPort(int port)
-{
- /* TODO: Re-code this to determine real values using the Plug and Play */
- /* manager for the OS. */
- switch (port) {
- case 0: return 0x3F8;
- case 1: return 0x2F8;
- }
- return 0;
-}
-
-int PMAPI PM_getLPTPort(int port)
-{
- /* TODO: Re-code this to determine real values using the Plug and Play */
- /* manager for the OS. */
- switch (port) {
- case 0: return 0x3BC;
- case 1: return 0x378;
- case 2: return 0x278;
- }
- return 0;
-}
-
-void * PMAPI PM_mallocShared(long size)
-{
- return PM_malloc(size);
-}
-
-void PMAPI PM_freeShared(void *ptr)
-{
- PM_free(ptr);
-}
-
-void * PMAPI PM_mapToProcess(void *base,ulong limit)
-{ return (void*)base; }
-
-void * PMAPI PM_mapRealPointer(uint r_seg,uint r_off)
-{
- void *p;
-
- PM_init();
-
- if ((p = VBIOSgetmemptr(r_seg, r_off, VRegs)) == (void *)-1)
- return NULL;
- return p;
-}
-
-void * PMAPI PM_allocRealSeg(uint size,uint *r_seg,uint *r_off)
-{
- if (size > 1024) {
- printf("PM_allocRealSeg: can't handle %d bytes\n", size);
- return 0;
- }
- if (rmbuf_inuse != 0) {
- printf("PM_allocRealSeg: transfer area already in use\n");
- return 0;
- }
- PM_init();
- rmbuf_inuse = 1;
- *r_seg = VBIOS_TransBufVSeg(VRegs);
- *r_off = VBIOS_TransBufVOff(VRegs);
- return (void*)VBIOS_TransBufPtr(VRegs);
-}
-
-void PMAPI PM_freeRealSeg(void *mem)
-{
- if (rmbuf_inuse == 0) {
- printf("PM_freeRealSeg: nothing was allocated\n");
- return;
- }
- rmbuf_inuse = 0;
-}
-
-void PMAPI DPMI_int86(int intno, DPMI_regs *regs)
-{
- PM_init();
- if (VRegs == NULL)
- return;
-
- VRegs->l.eax = regs->eax;
- VRegs->l.ebx = regs->ebx;
- VRegs->l.ecx = regs->ecx;
- VRegs->l.edx = regs->edx;
- VRegs->l.esi = regs->esi;
- VRegs->l.edi = regs->edi;
-
- VBIOSint(intno, VRegs, 1024);
-
- regs->eax = VRegs->l.eax;
- regs->ebx = VRegs->l.ebx;
- regs->ecx = VRegs->l.ecx;
- regs->edx = VRegs->l.edx;
- regs->esi = VRegs->l.esi;
- regs->edi = VRegs->l.edi;
- regs->flags = VRegs->w.flags & 0x1;
-}
-
-int PMAPI PM_int86(int intno, RMREGS *in, RMREGS *out)
-{
- PM_init();
- if (VRegs == NULL)
- return 0;
-
- VRegs->l.eax = in->e.eax;
- VRegs->l.ebx = in->e.ebx;
- VRegs->l.ecx = in->e.ecx;
- VRegs->l.edx = in->e.edx;
- VRegs->l.esi = in->e.esi;
- VRegs->l.edi = in->e.edi;
-
- VBIOSint(intno, VRegs, 1024);
-
- out->e.eax = VRegs->l.eax;
- out->e.ebx = VRegs->l.ebx;
- out->e.ecx = VRegs->l.ecx;
- out->e.edx = VRegs->l.edx;
- out->e.esi = VRegs->l.esi;
- out->e.edi = VRegs->l.edi;
- out->x.cflag = VRegs->w.flags & 0x1;
-
- return out->x.ax;
-}
-
-int PMAPI PM_int86x(int intno, RMREGS *in, RMREGS *out,
- RMSREGS *sregs)
-{
- PM_init();
- if (VRegs == NULL)
- return 0;
-
- if (intno == 0x21) {
- time_t today = time(NULL);
- struct tm *t;
- t = localtime(&today);
- out->x.cx = t->tm_year + 1900;
- out->h.dh = t->tm_mon + 1;
- out->h.dl = t->tm_mday;
- return 0;
- }
- else {
- VRegs->l.eax = in->e.eax;
- VRegs->l.ebx = in->e.ebx;
- VRegs->l.ecx = in->e.ecx;
- VRegs->l.edx = in->e.edx;
- VRegs->l.esi = in->e.esi;
- VRegs->l.edi = in->e.edi;
- VRegs->w.es = sregs->es;
- VRegs->w.ds = sregs->ds;
-
- VBIOSint(intno, VRegs, 1024);
-
- out->e.eax = VRegs->l.eax;
- out->e.ebx = VRegs->l.ebx;
- out->e.ecx = VRegs->l.ecx;
- out->e.edx = VRegs->l.edx;
- out->e.esi = VRegs->l.esi;
- out->e.edi = VRegs->l.edi;
- out->x.cflag = VRegs->w.flags & 0x1;
- sregs->es = VRegs->w.es;
- sregs->ds = VRegs->w.ds;
-
- return out->x.ax;
- }
-}
-
-void PMAPI PM_callRealMode(uint seg,uint off, RMREGS *in,
- RMSREGS *sregs)
-{
- PM_init();
- if (VRegs == NULL)
- return;
-
- VRegs->l.eax = in->e.eax;
- VRegs->l.ebx = in->e.ebx;
- VRegs->l.ecx = in->e.ecx;
- VRegs->l.edx = in->e.edx;
- VRegs->l.esi = in->e.esi;
- VRegs->l.edi = in->e.edi;
- VRegs->w.es = sregs->es;
- VRegs->w.ds = sregs->ds;
-
- VBIOScall(seg, off, VRegs, 1024);
-
- in->e.eax = VRegs->l.eax;
- in->e.ebx = VRegs->l.ebx;
- in->e.ecx = VRegs->l.ecx;
- in->e.edx = VRegs->l.edx;
- in->e.esi = VRegs->l.esi;
- in->e.edi = VRegs->l.edi;
- in->x.cflag = VRegs->w.flags & 0x1;
- sregs->es = VRegs->w.es;
- sregs->ds = VRegs->w.ds;
-}
-
-void PMAPI PM_availableMemory(ulong *physical,ulong *total)
-{
-#ifndef __QNXNTO__
- *physical = *total = _memavl();
-#endif
-}
-
-void * PMAPI PM_allocLockedMem(
- uint size,
- ulong *physAddr,
- ibool contiguous,
- ibool below16M)
-{
- /* TODO: Implement this on QNX */
- return NULL;
-}
-
-void PMAPI PM_freeLockedMem(
- void *p,
- uint size,
- ibool contiguous)
-{
- /* TODO: Implement this on QNX */
-}
-
-void * PMAPI PM_allocPage(
- ibool locked)
-{
- /* TODO: Implement this on QNX */
- return NULL;
-}
-
-void PMAPI PM_freePage(
- void *p)
-{
- /* TODO: Implement this on QNX */
-}
-
-void PMAPI PM_setBankA(int bank)
-{
- PM_init();
- if (VRegs == NULL)
- return;
-
- VRegs->l.eax = 0x4F05;
- VRegs->l.ebx = 0x0000;
- VRegs->l.edx = bank;
- VBIOSint(0x10, VRegs, 1024);
-}
-
-void PMAPI PM_setBankAB(int bank)
-{
- PM_init();
- if (VRegs == NULL)
- return;
-
- VRegs->l.eax = 0x4F05;
- VRegs->l.ebx = 0x0000;
- VRegs->l.edx = bank;
- VBIOSint(0x10, VRegs, 1024);
-
- VRegs->l.eax = 0x4F05;
- VRegs->l.ebx = 0x0001;
- VRegs->l.edx = bank;
- VBIOSint(0x10, VRegs, 1024);
-}
-
-void PMAPI PM_setCRTStart(int x,int y,int waitVRT)
-{
- PM_init();
- if (VRegs == NULL)
- return;
-
- VRegs->l.eax = 0x4F07;
- VRegs->l.ebx = waitVRT;
- VRegs->l.ecx = x;
- VRegs->l.edx = y;
- VBIOSint(0x10, VRegs, 1024);
-}
-
-ibool PMAPI PM_doBIOSPOST(
- ushort axVal,
- ulong BIOSPhysAddr,
- void *copyOfBIOS,
- ulong BIOSLen)
-{
- (void)axVal;
- (void)BIOSPhysAddr;
- (void)copyOfBIOS;
- (void)BIOSLen;
- return false;
-}
-
-int PMAPI PM_lockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
- p = p; len = len;
- return 1;
-}
-
-int PMAPI PM_unlockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
- p = p; len = len;
- return 1;
-}
-
-int PMAPI PM_lockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
- p = p; len = len;
- return 1;
-}
-
-int PMAPI PM_unlockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
- p = p; len = len;
- return 1;
-}
-
-PM_MODULE PMAPI PM_loadLibrary(
- const char *szDLLName)
-{
- /* TODO: Implement this to load shared libraries! */
- (void)szDLLName;
- return NULL;
-}
-
-void * PMAPI PM_getProcAddress(
- PM_MODULE hModule,
- const char *szProcName)
-{
- /* TODO: Implement this! */
- (void)hModule;
- (void)szProcName;
- return NULL;
-}
-
-void PMAPI PM_freeLibrary(
- PM_MODULE hModule)
-{
- /* TODO: Implement this! */
- (void)hModule;
-}
-
-int PMAPI PM_setIOPL(
- int level)
-{
- /* QNX handles IOPL selection at the program link level. */
- return level;
-}
-
-/****************************************************************************
-PARAMETERS:
-base - The starting physical base address of the region
-size - The size in bytes of the region
-type - Type to place into the MTRR register
-
-RETURNS:
-Error code describing the result.
-
-REMARKS:
-Function to enable write combining for the specified region of memory.
-****************************************************************************/
-int PMAPI PM_enableWriteCombine(
- ulong base,
- ulong size,
- uint type)
-{
-#ifndef __QNXNTO__
- return MTRR_enableWriteCombine(base,size,type);
-#else
- return PM_MTRR_NOT_SUPPORTED;
-#endif
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/qnx/vflat.c
deleted file mode 100644
index 579ef2c95c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/qnx/vflat.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-ibool PMAPI VF_available(void)
-{
- return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
- baseAddr = baseAddr;
- bankSize = bankSize;
- codeLen = codeLen;
- bankFunc = bankFunc;
- return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/qnx/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/qnx/ztimer.c
deleted file mode 100644
index d2740971f9..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/qnx/ztimer.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: QNX
-*
-* Description: QNX specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-void __ZTimerInit(void)
-{
-}
-
-/****************************************************************************
-REMARKS:
-Use the gettimeofday() function to get microsecond precision (probably less
-though)
-****************************************************************************/
-static ulong __ULZReadTime(void)
-{
- struct timespec ts;
- clock_gettime(CLOCK_REALTIME, &ts);
- return (ts.tv_nsec / 1000 + ts.tv_sec * 1000000);
-}
-
-/****************************************************************************
-REMARKS:
-Start the Zen Timer counting.
-****************************************************************************/
-#define __LZTimerOn(tm) tm->start.low = __ULZReadTime()
-
-/****************************************************************************
-REMARKS:
-Compute the lap time since the timer was started.
-****************************************************************************/
-#define __LZTimerLap(tm) (__ULZReadTime() - tm->start.low)
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOff(tm) tm->end.low = __ULZReadTime()
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerCount(tm) (tm->end.low - tm->start.low)
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION 1
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{ return finish - start; }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/rttarget/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/rttarget/cpuinfo.c
deleted file mode 100644
index 4f32c3e887..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/rttarget/cpuinfo.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: RTTarget-32
-*
-* Description: Module to implement OS specific services to measure the
-* CPU frequency.
-*
-****************************************************************************/
-
-/*---------------------------- Global variables ---------------------------*/
-
-static ibool havePerformanceCounter;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Increase the thread priority to maximum, if possible.
-****************************************************************************/
-static int SetMaxThreadPriority(void)
-{
- int oldPriority;
- HANDLE hThread = GetCurrentThread();
-
- oldPriority = GetThreadPriority(hThread);
- if (oldPriority != THREAD_PRIORITY_ERROR_RETURN)
- SetThreadPriority(hThread, THREAD_PRIORITY_TIME_CRITICAL);
- return oldPriority;
-}
-
-/****************************************************************************
-REMARKS:
-Restore the original thread priority.
-****************************************************************************/
-static void RestoreThreadPriority(
- int oldPriority)
-{
- HANDLE hThread = GetCurrentThread();
-
- if (oldPriority != THREAD_PRIORITY_ERROR_RETURN)
- SetThreadPriority(hThread, oldPriority);
-}
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
- CPU_largeInteger *freq)
-{
- if (!QueryPerformanceFrequency((LARGE_INTEGER*)freq)) {
- havePerformanceCounter = false;
- freq->low = 100000;
- freq->high = 0;
- }
- else
- havePerformanceCounter = true;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-****************************************************************************/
-#define GetCounter(t) \
-{ \
- if (havePerformanceCounter) \
- QueryPerformanceCounter((LARGE_INTEGER*)t); \
- else { \
- (t)->low = timeGetTime() * 100; \
- (t)->high = 0; \
- } \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/rttarget/event.c b/board/MAI/bios_emulator/scitech/src/pm/rttarget/event.c
deleted file mode 100644
index 962a14a3c1..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/rttarget/event.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/****************************************************************************
-*
-* SciTech Multi-platform Graphics Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: RTTarget-32
-*
-* Description: Win32 implementation for the SciTech cross platform
-* event library.
-*
-****************************************************************************/
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static ushort keyUpMsg[256] = {0}; /* Table of key up messages */
-static int rangeX,rangeY; /* Range of mouse coordinates */
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* These are not used under Win32 */
-#define _EVT_disableInt() 1
-#define _EVT_restoreInt(flags)
-
-/****************************************************************************
-PARAMETERS:
-scanCode - Scan code to test
-
-REMARKS:
-This macro determines if a specified key is currently down at the
-time that the call is made.
-****************************************************************************/
-#define _EVT_isKeyDown(scanCode) (keyUpMsg[scanCode] != 0)
-
-/****************************************************************************
-REMARKS:
-This function is used to return the number of ticks since system
-startup in milliseconds. This should be the same value that is placed into
-the time stamp fields of events, and is used to implement auto mouse down
-events.
-****************************************************************************/
-ulong _EVT_getTicks(void)
-{ return timeGetTime(); }
-
-/****************************************************************************
-REMARKS:
-Pumps all messages in the message queue from Win32 into our event queue.
-****************************************************************************/
-void _EVT_pumpMessages(void)
-{
- MSG msg;
- MSG charMsg;
- event_t evt;
-
- while (PeekMessage(&msg,NULL,0,0,PM_REMOVE)) {
- memset(&evt,0,sizeof(evt));
- switch (msg.message) {
- case WM_MOUSEMOVE:
- evt.what = EVT_MOUSEMOVE;
- break;
- case WM_LBUTTONDBLCLK:
- evt.what = EVT_MOUSEDOWN;
- evt.message = EVT_LEFTBMASK | EVT_DBLCLICK;
- break;
- case WM_LBUTTONDOWN:
- evt.what = EVT_MOUSEDOWN;
- evt.message = EVT_LEFTBMASK;
- break;
- case WM_LBUTTONUP:
- evt.what = EVT_MOUSEUP;
- evt.message = EVT_LEFTBMASK;
- break;
- case WM_RBUTTONDBLCLK:
- evt.what = EVT_MOUSEDOWN | EVT_DBLCLICK;
- evt.message = EVT_RIGHTBMASK;
- break;
- case WM_RBUTTONDOWN:
- evt.what = EVT_MOUSEDOWN;
- evt.message = EVT_RIGHTBMASK;
- break;
- case WM_RBUTTONUP:
- evt.what = EVT_MOUSEUP;
- evt.message = EVT_RIGHTBMASK;
- break;
- case WM_KEYDOWN:
- case WM_SYSKEYDOWN:
- if (HIWORD(msg.lParam) & KF_REPEAT) {
- evt.what = EVT_KEYREPEAT;
- }
- else {
- evt.what = EVT_KEYDOWN;
- }
- break;
- case WM_KEYUP:
- case WM_SYSKEYUP:
- evt.what = EVT_KEYUP;
- break;
- }
-
- /* Convert mouse event modifier flags */
- if (evt.what & EVT_MOUSEEVT) {
- evt.where_x = msg.pt.x;
- evt.where_y = msg.pt.y;
- if (evt.what == EVT_MOUSEMOVE) {
- if (oldMove != -1) {
- evtq[oldMove].where_x = evt.where_x;/* Modify existing one */
- evtq[oldMove].where_y = evt.where_y;
- evt.what = 0;
- }
- else {
- oldMove = freeHead; /* Save id of this move event */
- }
- }
- else
- oldMove = -1;
- if (msg.wParam & MK_LBUTTON)
- evt.modifiers |= EVT_LEFTBUT;
- if (msg.wParam & MK_RBUTTON)
- evt.modifiers |= EVT_RIGHTBUT;
- if (msg.wParam & MK_SHIFT)
- evt.modifiers |= EVT_SHIFTKEY;
- if (msg.wParam & MK_CONTROL)
- evt.modifiers |= EVT_CTRLSTATE;
- }
-
- /* Convert keyboard codes */
- TranslateMessage(&msg);
- if (evt.what & EVT_KEYEVT) {
- int scanCode = (msg.lParam >> 16) & 0xFF;
- if (evt.what == EVT_KEYUP) {
- /* Get message for keyup code from table of cached down values */
- evt.message = keyUpMsg[scanCode];
- keyUpMsg[scanCode] = 0;
- }
- else {
- if (PeekMessage(&charMsg,NULL,WM_CHAR,WM_CHAR,PM_REMOVE))
- evt.message = charMsg.wParam;
- if (PeekMessage(&charMsg,NULL,WM_SYSCHAR,WM_SYSCHAR,PM_REMOVE))
- evt.message = charMsg.wParam;
- evt.message |= ((msg.lParam >> 8) & 0xFF00);
- keyUpMsg[scanCode] = (ushort)evt.message;
- }
- if (evt.what == EVT_KEYREPEAT)
- evt.message |= (msg.lParam << 16);
- if (HIWORD(msg.lParam) & KF_ALTDOWN)
- evt.modifiers |= EVT_ALTSTATE;
- if (GetKeyState(VK_SHIFT) & 0x8000U)
- evt.modifiers |= EVT_SHIFTKEY;
- if (GetKeyState(VK_CONTROL) & 0x8000U)
- evt.modifiers |= EVT_CTRLSTATE;
- oldMove = -1;
- }
-
- if (evt.what != 0) {
- /* Add time stamp and add the event to the queue */
- evt.when = msg.time;
- if (count < EVENTQSIZE) {
- addEvent(&evt);
- }
- }
- DispatchMessage(&msg);
- }
-}
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-****************************************************************************/
-#define _EVT_maskKeyCode(evt)
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort()
-{
- EVT_exit();
- PM_fatalError("Unhandled exception!");
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
- _EVT_mouseMoveHandler mouseMove)
-{
- /* Initialise the event queue */
- _mouseMove = mouseMove;
- initEventQueue();
- memset(keyUpMsg,0,sizeof(keyUpMsg));
-
- /* Catch program termination signals so we can clean up properly */
- signal(SIGABRT, _EVT_abort);
- signal(SIGFPE, _EVT_abort);
- signal(SIGINT, _EVT_abort);
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
- int xRes,
- int yRes)
-{
- rangeX = xRes;
- rangeY = yRes;
-}
-
-/****************************************************************************
-REMARKS
-Modifes the mouse coordinates as necessary if scaling to OS coordinates,
-and sets the OS mouse cursor position.
-****************************************************************************/
-void _EVT_setMousePos(
- int *x,
- int *y)
-{
- SetCursorPos(*x,*y);
-}
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVT_resume(void)
-{
- /* Do nothing for Win32 */
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVT_suspend(void)
-{
- /* Do nothing for Win32 */
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVT_exit(void)
-{
- /* Restore signal handlers */
- signal(SIGABRT, SIG_DFL);
- signal(SIGFPE, SIG_DFL);
- signal(SIGINT, SIG_DFL);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/rttarget/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/rttarget/oshdr.h
deleted file mode 100644
index 1352dadad6..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/rttarget/oshdr.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: RTTarget-32
-*
-* Description: Include file to include all OS specific header files.
-*
-****************************************************************************/
-
-#define WIN32_LEAN_AND_MEAN
-#define STRICT
-#include <windows.h>
-#include <mmsystem.h>
diff --git a/board/MAI/bios_emulator/scitech/src/pm/rttarget/pm.c b/board/MAI/bios_emulator/scitech/src/pm/rttarget/pm.c
deleted file mode 100644
index 47d7ed6ab1..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/rttarget/pm.c
+++ /dev/null
@@ -1,701 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: RTTarget-32
-*
-* Description: Implementation for the OS Portability Manager Library, which
-* contains functions to implement OS specific services in a
-* generic, cross platform API. Porting the OS Portability
-* Manager library is the first step to porting any SciTech
-* products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#define WIN32_LEAN_AND_MEAN
-#define STRICT
-#include <windows.h>
-#include <mmsystem.h>
-#ifdef __BORLANDC__
-#pragma warn -par
-#endif
-
-/*--------------------------- Global variables ----------------------------*/
-
-static void (PMAPIP fatalErrorCleanup)(void) = NULL;
-
-/*----------------------------- Implementation ----------------------------*/
-
-void MTRR_init(void);
-
-/****************************************************************************
-REMARKS:
-Initialise the PM library.
-****************************************************************************/
-void PMAPI PM_init(void)
-{
- /* TODO: dO any special init code in here. */
- MTRR_init();
-}
-
-/****************************************************************************
-REMARKS:
-Return the operating system type identifier.
-****************************************************************************/
-long PMAPI PM_getOSType(void)
-{
- return _OS_RTTARGET;
-}
-
-/****************************************************************************
-REMARKS:
-Return the runtime type identifier.
-****************************************************************************/
-int PMAPI PM_getModeType(void)
-{
- return PM_386;
-}
-
-/****************************************************************************
-REMARKS:
-Add a file directory separator to the end of the filename.
-****************************************************************************/
-void PMAPI PM_backslash(
- char *s)
-{
- uint pos = strlen(s);
- if (s[pos-1] != '\\') {
- s[pos] = '\\';
- s[pos+1] = '\0';
- }
-}
-
-/****************************************************************************
-REMARKS:
-Add a user defined PM_fatalError cleanup function.
-****************************************************************************/
-void PMAPI PM_setFatalErrorCleanup(
- void (PMAPIP cleanup)(void))
-{
- fatalErrorCleanup = cleanup;
-}
-
-/****************************************************************************
-REMARKS:
-Report a fatal error condition and halt the program.
-****************************************************************************/
-void PMAPI PM_fatalError(
- const char *msg)
-{
- if (fatalErrorCleanup)
- fatalErrorCleanup();
- /* TODO: Display a fatal error message and exit! */
-/* MessageBox(NULL,msg,"Fatal Error!", MB_ICONEXCLAMATION); */
- exit(1);
-}
-
-/****************************************************************************
-REMARKS:
-Allocate the real mode VESA transfer buffer for communicating with the BIOS.
-****************************************************************************/
-void * PMAPI PM_getVESABuf(
- uint *len,
- uint *rseg,
- uint *roff)
-{
- /* No BIOS access for the RTTarget */
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Check if a key has been pressed.
-****************************************************************************/
-int PMAPI PM_kbhit(void)
-{
- /* TODO: Need to check if a key is waiting on the keyboard queue */
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-Wait for and return the next keypress.
-****************************************************************************/
-int PMAPI PM_getch(void)
-{
- /* TODO: Need to obtain the next keypress, and block until one is hit */
- return 0xD;
-}
-
-/****************************************************************************
-REMARKS:
-Set the location of the OS console cursor.
-****************************************************************************/
-void PM_setOSCursorLocation(
- int x,
- int y)
-{
- /* Nothing to do for RTTarget-32 */
-}
-
-/****************************************************************************
-REMARKS:
-Set the width of the OS console.
-****************************************************************************/
-void PM_setOSScreenWidth(
- int width,
- int height)
-{
- /* Nothing to do for RTTarget-32 */
-}
-
-/****************************************************************************
-REMARKS:
-Set the real time clock handler (used for software stereo modes).
-****************************************************************************/
-ibool PMAPI PM_setRealTimeClockHandler(
- PM_intHandler ih,
- int frequency)
-{
- /* Not supported for RTTarget-32 */
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Set the real time clock frequency (for stereo modes).
-****************************************************************************/
-void PMAPI PM_setRealTimeClockFrequency(
- int frequency)
-{
- /* Not supported under RTTarget-32 */
-}
-
-/****************************************************************************
-REMARKS:
-Restore the original real time clock handler.
-****************************************************************************/
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
- /* Not supported under RTTarget-32 */
-}
-
-/****************************************************************************
-REMARKS:
-Return the current operating system path or working directory.
-****************************************************************************/
-char * PMAPI PM_getCurrentPath(
- char *path,
- int maxLen)
-{
- return getcwd(path,maxLen);
-}
-
-/****************************************************************************
-REMARKS:
-Return the drive letter for the boot drive.
-****************************************************************************/
-char PMAPI PM_getBootDrive(void)
-{
- return 'c';
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the VBE/AF driver files.
-****************************************************************************/
-const char * PMAPI PM_getVBEAFPath(void)
-{
- return "c:\\";
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the Nucleus driver files.
-****************************************************************************/
-const char * PMAPI PM_getNucleusPath(void)
-{
- /* TODO: Point this at the path when the Nucleus drivers will be found */
- return "c:\\nucleus";
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the Nucleus configuration files.
-****************************************************************************/
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
- static char path[256];
- strcpy(path,PM_getNucleusPath());
- PM_backslash(path);
- strcat(path,"config");
- return path;
-}
-
-/****************************************************************************
-REMARKS:
-Return a unique identifier for the machine if possible.
-****************************************************************************/
-const char * PMAPI PM_getUniqueID(void)
-{
- return PM_getMachineName();
-}
-
-/****************************************************************************
-REMARKS:
-Get the name of the machine on the network.
-****************************************************************************/
-const char * PMAPI PM_getMachineName(void)
-{
- /* Not necessary for RTTarget-32 */
- return "Unknown";
-}
-
-/****************************************************************************
-REMARKS:
-Return a pointer to the real mode BIOS data area.
-****************************************************************************/
-void * PMAPI PM_getBIOSPointer(void)
-{
- /* Not used for RTTarget-32 */
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Return a pointer to 0xA0000 physical VGA graphics framebuffer.
-****************************************************************************/
-void * PMAPI PM_getA0000Pointer(void)
-{
- static void *bankPtr;
- if (!bankPtr)
- bankPtr = PM_mapPhysicalAddr(0xA0000,0xFFFF,true);
- return bankPtr;
-}
-
-/****************************************************************************
-REMARKS:
-Map a physical address to a linear address in the callers process.
-****************************************************************************/
-void * PMAPI PM_mapPhysicalAddr(
- ulong base,
- ulong limit,
- ibool isCached)
-{
- /* TODO: Map a physical memory address to a linear address */
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a physical address mapping allocated by PM_mapPhysicalAddr.
-****************************************************************************/
-void PMAPI PM_freePhysicalAddr(
- void *ptr,
- ulong limit)
-{
- /* TODO: Free the physical address mapping */
-}
-
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{
- /* TODO: This function should find the physical address of a linear */
- /* address. */
- return 0xFFFFFFFFUL;
-}
-
-void PMAPI PM_sleep(ulong milliseconds)
-{
- Sleep(milliseconds);
-}
-
-int PMAPI PM_getCOMPort(int port)
-{
- /* TODO: Re-code this to determine real values using the Plug and Play */
- /* manager for the OS. */
- switch (port) {
- case 0: return 0x3F8;
- case 1: return 0x2F8;
- }
- return 0;
-}
-
-int PMAPI PM_getLPTPort(int port)
-{
- /* TODO: Re-code this to determine real values using the Plug and Play */
- /* manager for the OS. */
- switch (port) {
- case 0: return 0x3BC;
- case 1: return 0x378;
- case 2: return 0x278;
- }
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of (unnamed) shared memory.
-****************************************************************************/
-void * PMAPI PM_mallocShared(
- long size)
-{
- return PM_malloc(size);
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of shared memory.
-****************************************************************************/
-void PMAPI PM_freeShared(
- void *ptr)
-{
- PM_free(ptr);
-}
-
-/****************************************************************************
-REMARKS:
-Map a linear memory address to the calling process address space. The
-address will have been allocated in another process using the
-PM_mapPhysicalAddr function.
-****************************************************************************/
-void * PMAPI PM_mapToProcess(
- void *base,
- ulong limit)
-{
- return base;
-}
-
-/****************************************************************************
-REMARKS:
-Map a real mode pointer to a protected mode pointer.
-****************************************************************************/
-void * PMAPI PM_mapRealPointer(
- uint r_seg,
- uint r_off)
-{
- /* Not used for RTTarget-32 */
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of real mode memory
-****************************************************************************/
-void * PMAPI PM_allocRealSeg(
- uint size,
- uint *r_seg,
- uint *r_off)
-{
- /* Not used for RTTarget-32 */
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of real mode memory.
-****************************************************************************/
-void PMAPI PM_freeRealSeg(
- void *mem)
-{
- /* Not used for RTTarget-32 */
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt (parameters in DPMI compatible structure)
-****************************************************************************/
-void PMAPI DPMI_int86(
- int intno,
- DPMI_regs *regs)
-{
- /* Not used for RTTarget-32 */
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt.
-****************************************************************************/
-int PMAPI PM_int86(
- int intno,
- RMREGS *in,
- RMREGS *out)
-{
- /* Not used for RTTarget-32 */
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt.
-****************************************************************************/
-int PMAPI PM_int86x(
- int intno,
- RMREGS *in,
- RMREGS *out,
- RMSREGS *sregs)
-{
- /* Not used for RTTarget-32 */
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Call a real mode far function.
-****************************************************************************/
-void PMAPI PM_callRealMode(
- uint seg,
- uint off,
- RMREGS *in,
- RMSREGS *sregs)
-{
- /* Not used for RTTarget-32 */
-}
-
-/****************************************************************************
-REMARKS:
-Return the amount of available memory.
-****************************************************************************/
-void PMAPI PM_availableMemory(
- ulong *physical,
- ulong *total)
-{
- /* TODO: Figure out how to determine the available memory. Not entirely */
- /* critical so returning 0 is OK. */
- *physical = *total = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of locked, physical memory for DMA operations.
-****************************************************************************/
-void * PMAPI PM_allocLockedMem(
- uint size,
- ulong *physAddr,
- ibool contiguous,
- ibool below16M)
-{
- /* TODO: Allocate a block of locked, phsyically contigous memory for DMA */
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of locked physical memory.
-****************************************************************************/
-void PMAPI PM_freeLockedMem(
- void *p,
- uint size,
-
- ibool contiguous)
-{
- /* TODO: Free a locked memory buffer */
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display banks.
-****************************************************************************/
-void PMAPI PM_setBankA(
- int bank)
-{
- /* Not used for RTTarget-32 */
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display banks.
-****************************************************************************/
-void PMAPI PM_setBankAB(
- int bank)
-{
- /* Not used for RTTarget-32 */
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display start address.
-****************************************************************************/
-void PMAPI PM_setCRTStart(
- int x,
- int y,
- int waitVRT)
-{
- /* Not used for RTTarget-32 */
-}
-
-/****************************************************************************
-REMARKS:
-Execute the POST on the secondary BIOS for a controller.
-****************************************************************************/
-ibool PMAPI PM_doBIOSPOST(
- ushort axVal,
- ulong BIOSPhysAddr,
- void *mappedBIOS)
-{
- /* Not used for RTTarget-32 */
- return false;
-}
-
-PM_MODULE PMAPI PM_loadLibrary(
- const char *szDLLName)
-{
- /* TODO: Implement this to load shared libraries! */
- (void)szDLLName;
- return NULL;
-}
-
-void * PMAPI PM_getProcAddress(
- PM_MODULE hModule,
- const char *szProcName)
-{
- /* TODO: Implement this! */
- (void)hModule;
- (void)szProcName;
- return NULL;
-}
-
-void PMAPI PM_freeLibrary(
- PM_MODULE hModule)
-{
- /* TODO: Implement this! */
- (void)hModule;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-ulong PMAPI PM_findFirstFile(
- const char *filename,
- PM_findData *findData)
-{
- /* TODO: This function should start a directory enumeration search */
- /* given the filename (with wildcards). The data should be */
- /* converted and returned in the findData standard form. */
- (void)filename;
- (void)findData;
- return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
- ulong handle,
- PM_findData *findData)
-{
- /* TODO: This function should find the next file in directory enumeration */
- /* search given the search criteria defined in the call to */
- /* PM_findFirstFile. The data should be converted and returned */
- /* in the findData standard form. */
- (void)handle;
- (void)findData;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
- ulong handle)
-{
- /* TODO: This function should close the find process. This may do */
- /* nothing for some OS'es. */
- (void)handle;
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
- 1 - Drive A:
- 2 - Drive B:
- 3 - Drive C:
- etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
- char drive)
-{
- if (drive == 3)
- return true;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
- int drive,
- char *dir,
- int len)
-{
- (void)drive;
- getcwd(dir,len);
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
- const char *filename,
- uint attrib)
-{
- /* TODO: Set the file attributes for a file */
- (void)filename;
- (void)attrib;
-}
-
-/****************************************************************************
-REMARKS:
-Function to create a directory.
-****************************************************************************/
-ibool PMAPI PM_mkdir(
- const char *filename)
-{
- return mkdir(filename) == 0;
-}
-
-/****************************************************************************
-REMARKS:
-Function to remove a directory.
-****************************************************************************/
-ibool PMAPI PM_rmdir(
- const char *filename)
-{
- return rmdir(filename) == 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/rttarget/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/rttarget/vflat.c
deleted file mode 100644
index dd9dfe6826..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/rttarget/vflat.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: RTTarget-32
-*
-* Description: Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#ifdef __BORLANDC__
-#pragma warn -par
-#endif
-
-ibool PMAPI VF_available(void)
-{
- return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
- return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/rttarget/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/rttarget/ztimer.c
deleted file mode 100644
index 80c184dff1..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/rttarget/ztimer.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: RTTarget-32
-*
-* Description: OS specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-/*---------------------------- Global variables ---------------------------*/
-
-static CPU_largeInteger countFreq;
-static ibool havePerformanceCounter;
-static ulong start,finish;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-void __ZTimerInit(void)
-{
-#ifdef NO_ASSEMBLER
- havePerformanceCounter = false;
-#else
- havePerformanceCounter = QueryPerformanceFrequency((LARGE_INTEGER*)&countFreq);
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Start the Zen Timer counting.
-****************************************************************************/
-static void __LZTimerOn(
- LZTimerObject *tm)
-{
- if (havePerformanceCounter)
- QueryPerformanceCounter((LARGE_INTEGER*)&tm->start);
- else
- tm->start.low = timeGetTime();
-}
-
-/****************************************************************************
-REMARKS:
-Compute the lap time since the timer was started.
-****************************************************************************/
-static ulong __LZTimerLap(
- LZTimerObject *tm)
-{
- CPU_largeInteger tmLap,tmCount;
-
- if (havePerformanceCounter) {
- QueryPerformanceCounter((LARGE_INTEGER*)&tmLap);
- _CPU_diffTime64(&tm->start,&tmLap,&tmCount);
- return _CPU_calcMicroSec(&tmCount,countFreq.low);
- }
- else {
- tmLap.low = timeGetTime();
- return (tmLap.low - tm->start.low) * 1000L;
- }
-}
-
-/****************************************************************************
-REMARKS:
-Stop the Zen Timer counting.
-****************************************************************************/
-static void __LZTimerOff(
- LZTimerObject *tm)
-{
- if (havePerformanceCounter)
- QueryPerformanceCounter((LARGE_INTEGER*)&tm->end);
- else
- tm->end.low = timeGetTime();
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time in microseconds between start and end timings.
-****************************************************************************/
-static ulong __LZTimerCount(
- LZTimerObject *tm)
-{
- CPU_largeInteger tmCount;
-
- if (havePerformanceCounter) {
- _CPU_diffTime64(&tm->start,&tm->end,&tmCount);
- return _CPU_calcMicroSec(&tmCount,countFreq.low);
- }
- else
- return (tm->end.low - tm->start.low) * 1000L;
-}
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION 1000
-
-/****************************************************************************
-REMARKS:
-Read the Long Period timer from the OS
-****************************************************************************/
-static ulong __ULZReadTime(void)
-{ return timeGetTime(); }
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{ return finish - start; }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/_event.asm b/board/MAI/bios_emulator/scitech/src/pm/smx/_event.asm
deleted file mode 100644
index da62b1f712..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/_event.asm
+++ /dev/null
@@ -1,175 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech Multi-platform Graphics Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Language: 80386 Assembler
-;* Environment: IBM PC (MS DOS)
-;*
-;* Description: Assembly language support routines for the event module.
-;*
-;****************************************************************************
-
- ideal
-
-include "scitech.mac" ; Memory model macros
-
-ifdef flatmodel
-
-header _event ; Set up memory model
-
-begdataseg _event
-
- cextern _EVT_biosPtr,DPTR
-
- cpublic _EVT_dataStart
-
-ifdef USE_NASM
-%define KB_HEAD WORD esi+01Ah ; Keyboard buffer head in BIOS data area
-%define KB_TAIL WORD esi+01Ch ; Keyboard buffer tail in BIOS data area
-%define KB_START WORD esi+080h ; Start of keyboard buffer in BIOS data area
-%define KB_END WORD esi+082h ; End of keyboard buffer in BIOS data area
-else
-KB_HEAD EQU WORD esi+01Ah ; Keyboard buffer head in BIOS data area
-KB_TAIL EQU WORD esi+01Ch ; Keyboard buffer tail in BIOS data area
-KB_START EQU WORD esi+080h ; Start of keyboard buffer in BIOS data area
-KB_END EQU WORD esi+082h ; End of keyboard buffer in BIOS data area
-endif
-
- cpublic _EVT_dataEnd
-
-enddataseg _event
-
-begcodeseg _event ; Start of code segment
-
- cpublic _EVT_codeStart
-
-;----------------------------------------------------------------------------
-; int _EVT_getKeyCode(void)
-;----------------------------------------------------------------------------
-; Returns the key code for the next available key by extracting it from
-; the BIOS keyboard buffer.
-;----------------------------------------------------------------------------
-cprocstart _EVT_getKeyCode
-
- enter_c
-
- mov esi,[_EVT_biosPtr]
- xor ebx,ebx
- xor eax,eax
- mov bx,[KB_HEAD]
- cmp bx,[KB_TAIL]
- jz @@Done
- xor eax,eax
- mov ax,[esi+ebx] ; EAX := character from keyboard buffer
- inc _bx
- inc _bx
- cmp bx,[KB_END] ; Hit the end of the keyboard buffer?
- jl @@1
- mov bx,[KB_START]
-@@1: mov [KB_HEAD],bx ; Update keyboard buffer head pointer
-
-@@Done: leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int _EVT_disableInt(void);
-;----------------------------------------------------------------------------
-; Return processor interrupt status and disable interrupts.
-;----------------------------------------------------------------------------
-cprocstart _EVT_disableInt
-
- pushf ; Put flag word on stack
- cli ; Disable interrupts!
- pop eax ; deposit flag word in return register
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _EVT_restoreInt(int ps);
-;----------------------------------------------------------------------------
-; Restore processor interrupt status.
-;----------------------------------------------------------------------------
-cprocstart _EVT_restoreInt
-
- ARG ps:UINT
-
- push ebp
- mov ebp,esp ; Set up stack frame
- push [DWORD ps]
- popf ; Restore processor status (and interrupts)
- pop ebp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int EVT_rdinx(int port,int index)
-;----------------------------------------------------------------------------
-; Reads an indexed register value from an I/O port.
-;----------------------------------------------------------------------------
-cprocstart EVT_rdinx
-
- ARG port:UINT, index:UINT
-
- push ebp
- mov ebp,esp
- mov edx,[port]
- mov al,[BYTE index]
- out dx,al
- inc dx
- in al,dx
- movzx eax,al
- pop ebp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void EVT_wrinx(int port,int index,int value)
-;----------------------------------------------------------------------------
-; Writes an indexed register value to an I/O port.
-;----------------------------------------------------------------------------
-cprocstart EVT_wrinx
-
- ARG port:UINT, index:UINT, value:UINT
-
- push ebp
- mov ebp,esp
- mov edx,[port]
- mov al,[BYTE index]
- mov ah,[BYTE value]
- out dx,ax
- pop ebp
- ret
-
-cprocend
-
- cpublic _EVT_codeEnd
-
-endcodeseg _event
-
-endif
-
- END ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/_lztimer.asm b/board/MAI/bios_emulator/scitech/src/pm/smx/_lztimer.asm
deleted file mode 100644
index 068eea65d2..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/_lztimer.asm
+++ /dev/null
@@ -1,58 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Language: NASM or TASM Assembler
-;* Environment: smx 32 bit intel CPU
-;*
-;* Description: SMX does not support 486's, so this module is not necessary.
-;*
-;* All registers and all flags are preserved by all routines, except
-;* interrupts which are always turned on
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac"
-
-header _lztimer
-
-begdataseg _lztimer
-
-enddataseg _lztimer
-
-begcodeseg _lztimer ; Start of code segment
-
-cprocstart LZ_disable
- cli
- ret
-cprocend
-
-cprocstart LZ_enable
- sti
- ret
-cprocend
-
-endcodeseg _lztimer
-
- END
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/_pm.asm b/board/MAI/bios_emulator/scitech/src/pm/smx/_pm.asm
deleted file mode 100644
index 1c7cb21864..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/_pm.asm
+++ /dev/null
@@ -1,448 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Language: 80386 Assembler, TASM 4.0 or NASM
-;* Environment: 32-bit SMX embedded systems development
-;*
-;* Description: Low level assembly support for the PM library specific to
-;* SMX.
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac" ; Memory model macros
-
-header _pm ; Set up memory model
-
-begdataseg _pm
-
- cextern _PM_savedDS,USHORT
-
-intel_id db "GenuineIntel" ; Intel vendor ID
-
-enddataseg _pm
-
-begcodeseg _pm ; Start of code segment
-
-;----------------------------------------------------------------------------
-; void PM_segread(PMSREGS *sregs)
-;----------------------------------------------------------------------------
-; Read the current value of all segment registers
-;----------------------------------------------------------------------------
-cprocstartdll16 PM_segread
-
- ARG sregs:DPTR
-
- enter_c
-
- mov ax,es
- _les _si,[sregs]
- mov [_ES _si],ax
- mov [_ES _si+2],cs
- mov [_ES _si+4],ss
- mov [_ES _si+6],ds
- mov [_ES _si+8],fs
- mov [_ES _si+10],gs
-
- leave_c
- ret
-
-cprocend
-
-; Create a table of the 256 different interrupt calls that we can jump
-; into
-
-ifdef USE_NASM
-
-%assign intno 0
-
-intTable:
-%rep 256
- db 0CDh
- db intno
-%assign intno intno + 1
- ret
- nop
-%endrep
-
-else
-
-intno = 0
-
-intTable:
- REPT 256
- db 0CDh
- db intno
-intno = intno + 1
- ret
- nop
- ENDM
-
-endif
-
-;----------------------------------------------------------------------------
-; _PM_genInt - Generate the appropriate interrupt
-;----------------------------------------------------------------------------
-cprocnear _PM_genInt
-
- push _ax ; Save _ax
- push _bx ; Save _bx
- mov ebx,[UINT esp+12] ; EBX := interrupt number
- mov _ax,offset intTable ; Point to interrupt generation table
- shl _bx,2 ; _BX := index into table
- add _ax,_bx ; _AX := pointer to interrupt code
- xchg eax,[esp+4] ; Restore eax, and set for int
- pop _bx ; restore _bx
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_int386x(int intno, PMREGS *in, PMREGS *out,PMSREGS *sregs)
-;----------------------------------------------------------------------------
-; Issues a software interrupt in protected mode. This routine has been
-; written to allow user programs to load CS and DS with different values
-; other than the default.
-;----------------------------------------------------------------------------
-cprocstartdll16 PM_int386x
-
- ARG intno:UINT, inptr:DPTR, outptr:DPTR, sregs:DPTR
-
- LOCAL flags:UINT, sv_ds:UINT, sv_esi:ULONG = LocalSize
-
- enter_c
- push ds
- push es ; Save segment registers
- push fs
- push gs
-
- _lds _si,[sregs] ; DS:_SI -> Load segment registers
- mov es,[_si]
- mov bx,[_si+6]
- mov [sv_ds],_bx ; Save value of user DS on stack
- mov fs,[_si+8]
- mov gs,[_si+10]
-
- _lds _si,[inptr] ; Load CPU registers
- mov eax,[_si]
- mov ebx,[_si+4]
- mov ecx,[_si+8]
- mov edx,[_si+12]
- mov edi,[_si+20]
- mov esi,[_si+16]
-
- push ds ; Save value of DS
- push _bp ; Some interrupts trash this!
- clc ; Generate the interrupt
- push [UINT intno]
- mov ds,[WORD sv_ds] ; Set value of user's DS selector
- call _PM_genInt
- pop _bp ; Pop intno from stack (flags unchanged)
- pop _bp ; Restore value of stack frame pointer
- pop ds ; Restore value of DS
-
- pushf ; Save flags for later
- pop [UINT flags]
- push esi ; Save ESI for later
- pop [DWORD sv_esi]
- push ds ; Save DS for later
- pop [UINT sv_ds]
-
- _lds _si,[outptr] ; Save CPU registers
- mov [_si],eax
- mov [_si+4],ebx
- mov [_si+8],ecx
- mov [_si+12],edx
- push [DWORD sv_esi]
- pop [DWORD _si+16]
- mov [_si+20],edi
-
- mov _bx,[flags] ; Return flags
- and ebx,1h ; Isolate carry flag
- mov [_si+24],ebx ; Save carry flag status
-
- _lds _si,[sregs] ; Save segment registers
- mov [_si],es
- mov _bx,[sv_ds]
- mov [_si+6],bx ; Get returned DS from stack
- mov [_si+8],fs
- mov [_si+10],gs
-
- pop gs ; Restore segment registers
- pop fs
- pop es
- pop ds
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_saveDS(void)
-;----------------------------------------------------------------------------
-; Save the value of DS into a section of the code segment, so that we can
-; quickly load this value at a later date in the PM_loadDS() routine from
-; inside interrupt handlers etc. The method to do this is different
-; depending on the DOS extender being used.
-;----------------------------------------------------------------------------
-cprocstartdll16 PM_saveDS
-
- mov [_PM_savedDS],ds ; Store away in data segment
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_loadDS(void)
-;----------------------------------------------------------------------------
-; Routine to load the DS register with the default value for the current
-; DOS extender. Only the DS register is loaded, not the ES register, so
-; if you wish to call C code, you will need to also load the ES register
-; in 32 bit protected mode.
-;----------------------------------------------------------------------------
-cprocstartdll16 PM_loadDS
-
- mov ds,[cs:_PM_savedDS] ; We can access the proper DS through CS
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setBankA(int bank)
-;----------------------------------------------------------------------------
-cprocstart PM_setBankA
-
- ARG bank:UINT
-
- push ebp
- mov ebp,esp
- push ebx
- mov _bx,0
- mov _ax,4F05h
- mov _dx,[bank]
- int 10h
- pop ebx
- pop ebp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setBankAB(int bank)
-;----------------------------------------------------------------------------
-cprocstart PM_setBankAB
-
- ARG bank:UINT
-
- push ebp
- mov ebp,esp
- push ebx
- mov _bx,0
- mov _ax,4F05h
- mov _dx,[bank]
- int 10h
- mov _bx,1
- mov _ax,4F05h
- mov _dx,[bank]
- int 10h
- pop ebx
- pop ebp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setCRTStart(int x,int y,int waitVRT)
-;----------------------------------------------------------------------------
-cprocstart PM_setCRTStart
-
- ARG x:UINT, y:UINT, waitVRT:UINT
-
- push ebp
- mov ebp,esp
- push ebx
- mov _bx,[waitVRT]
- mov _cx,[x]
- mov _dx,[y]
- mov _ax,4F07h
- int 10h
- pop ebx
- pop ebp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int _PM_inp(int port)
-;----------------------------------------------------------------------------
-; Reads a byte from the specified port
-;----------------------------------------------------------------------------
-cprocstart _PM_inp
-
- ARG port:UINT
-
- push _bp
- mov _bp,_sp
- xor _ax,_ax
- mov _dx,[port]
- in al,dx
- pop _bp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _PM_outp(int port,int value)
-;----------------------------------------------------------------------------
-; Write a byte to the specified port.
-;----------------------------------------------------------------------------
-cprocstart _PM_outp
-
- ARG port:UINT, value:UINT
-
- push _bp
- mov _bp,_sp
- mov _dx,[port]
- mov _ax,[value]
- out dx,al
- pop _bp
- ret
-
-cprocend
-
-; Macro to delay briefly to ensure that enough time has elapsed between
-; successive I/O accesses so that the device being accessed can respond
-; to both accesses even on a very fast PC.
-
-ifdef USE_NASM
-%macro DELAY 0
- jmp short $+2
- jmp short $+2
- jmp short $+2
-%endmacro
-%macro IODELAYN 1
-%rep %1
- DELAY
-%endrep
-%endmacro
-else
-macro DELAY
- jmp short $+2
- jmp short $+2
- jmp short $+2
-endm
-macro IODELAYN N
- rept N
- DELAY
- endm
-endm
-endif
-
-;----------------------------------------------------------------------------
-; uchar _PM_readCMOS(int index)
-;----------------------------------------------------------------------------
-; Read the value of a specific CMOS register. We do this with both
-; normal interrupts and NMI disabled.
-;----------------------------------------------------------------------------
-cprocstart _PM_readCMOS
-
- ARG index:UINT
-
- push _bp
- mov _bp,_sp
- pushfd
- mov al,[BYTE index]
- or al,80h ; Add disable NMI flag
- cli
- out 70h,al
- IODELAYN 5
- in al,71h
- mov ah,al
- xor al,al
- IODELAYN 5
- out 70h,al ; Re-enable NMI
- sti
- mov al,ah ; Return value in AL
- popfd
- pop _bp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _PM_writeCMOS(int index,uchar value)
-;----------------------------------------------------------------------------
-; Read the value of a specific CMOS register. We do this with both
-; normal interrupts and NMI disabled.
-;----------------------------------------------------------------------------
-cprocstart _PM_writeCMOS
-
- ARG index:UINT, value:UCHAR
-
- push _bp
- mov _bp,_sp
- pushfd
- mov al,[BYTE index]
- or al,80h ; Add disable NMI flag
- cli
- out 70h,al
- IODELAYN 5
- mov al,[value]
- out 71h,al
- xor al,al
- IODELAYN 5
- out 70h,al ; Re-enable NMI
- sti
- popfd
- pop _bp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; _PM_getPDB - Return the Page Table Directory Base address
-;----------------------------------------------------------------------------
-cprocstart _PM_getPDB
-
- mov eax,cr3
- and eax,0FFFFF000h
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; _PM_flushTLB - Flush the Translation Lookaside buffer
-;----------------------------------------------------------------------------
-cprocstart PM_flushTLB
-
- wbinvd ; Flush the CPU cache
- mov eax,cr3
- mov cr3,eax ; Flush the TLB
- ret
-
-cprocend
-
-endcodeseg _pm
-
- END ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/_pmsmx.asm b/board/MAI/bios_emulator/scitech/src/pm/smx/_pmsmx.asm
deleted file mode 100644
index 8352ce30c1..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/_pmsmx.asm
+++ /dev/null
@@ -1,933 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Language: 80386 Assembler, TASM 4.0 or NASM
-;* Environment: 32-bit SMX embedded systems development
-;*
-;* Description: Low level assembly support for the PM library specific to
-;* SMX interrupt handling.
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac" ; Memory model macros
-
-header _pmsmx ; Set up memory model
-
-; Define the size of our local stacks. For real mode code they cant be
-; that big, but for 32 bit protected mode code we can make them nice and
-; large so that complex C functions can be used.
-
-MOUSE_STACK EQU 4096
-TIMER_STACK EQU 4096
-KEY_STACK EQU 1024
-INT10_STACK EQU 1024
-
-ifdef USE_NASM
-
-; Macro to load DS and ES registers with correct value.
-
-%imacro LOAD_DS 0
- mov ds,[cs:_PM_savedDS]
- mov es,[cs:_PM_savedDS]
-%endmacro
-
-; Note that interrupts we disable interrupts during the following stack
-; %imacro for correct operation, but we do not enable them again. Normally
-; these %imacros are used within interrupt handlers so interrupts should
-; already be off. We turn them back on explicitly later if the user code
-; needs them to be back on.
-
-; Macro to switch to a new local stack.
-
-%imacro NEWSTK 1
- cli
- mov [seg_%1],ss
- mov [ptr_%1],_sp
- mov [TempSeg],ds
- mov ss,[TempSeg]
- mov _sp,offset %1
-%endmacro
-
-; %imacro to switch back to the old stack.
-
-%imacro RESTSTK 1
- cli
- mov ss,[seg_%1]
- mov _sp,[ptr_%1]
-%endmacro
-
-; %imacro to swap the current stack with the one saved away.
-
-%imacro SWAPSTK 1
- cli
- mov ax,ss
- xchg ax,[seg_%1]
- mov ss,ax
- xchg _sp,[ptr_%1]
-%endmacro
-
-else
-
-; Macro to load DS and ES registers with correct value.
-
-MACRO LOAD_DS
- mov ds,[cs:_PM_savedDS]
- mov es,[cs:_PM_savedDS]
-ENDM
-
-; Note that interrupts we disable interrupts during the following stack
-; macro for correct operation, but we do not enable them again. Normally
-; these macros are used within interrupt handlers so interrupts should
-; already be off. We turn them back on explicitly later if the user code
-; needs them to be back on.
-
-; Macro to switch to a new local stack.
-
-MACRO NEWSTK stkname
- cli
- mov [seg_&stkname&],ss
- mov [ptr_&stkname&],_sp
- mov [TempSeg],ds
- mov ss,[TempSeg]
- mov _sp,offset stkname
-ENDM
-
-; Macro to switch back to the old stack.
-
-MACRO RESTSTK stkname
- cli
- mov ss,[seg_&stkname&]
- mov _sp,[ptr_&stkname&]
-ENDM
-
-; Macro to swap the current stack with the one saved away.
-
-MACRO SWAPSTK stkname
- cli
- mov ax,ss
- xchg ax,[seg_&stkname&]
- mov ss,ax
- xchg _sp,[ptr_&stkname&]
-ENDM
-
-endif
-
-begdataseg _pmsmx
-
- cextern _PM_savedDS,USHORT
- cextern _PM_critHandler,CPTR
- cextern _PM_breakHandler,CPTR
- cextern _PM_timerHandler,CPTR
- cextern _PM_rtcHandler,CPTR
- cextern _PM_keyHandler,CPTR
- cextern _PM_key15Handler,CPTR
- cextern _PM_mouseHandler,CPTR
- cextern _PM_int10Handler,CPTR
-
- cextern _PM_ctrlCPtr,DPTR
- cextern _PM_ctrlBPtr,DPTR
- cextern _PM_critPtr,DPTR
-
- cextern _PM_prevTimer,FCPTR
- cextern _PM_prevRTC,FCPTR
- cextern _PM_prevKey,FCPTR
- cextern _PM_prevKey15,FCPTR
- cextern _PM_prevBreak,FCPTR
- cextern _PM_prevCtrlC,FCPTR
- cextern _PM_prevCritical,FCPTR
- cextern _PM_prevRealTimer,ULONG
- cextern _PM_prevRealRTC,ULONG
- cextern _PM_prevRealKey,ULONG
- cextern _PM_prevRealKey15,ULONG
- cextern _PM_prevRealInt10,ULONG
-
-cpublic _PM_pmsmxDataStart
-
-; Allocate space for all of the local stacks that we need. These stacks
-; are not very large, but should be large enough for most purposes
-; (generally you want to handle these interrupts quickly, simply storing
-; the information for later and then returning). If you need bigger
-; stacks then change the appropriate value in here.
-
- ALIGN 4
- dclb MOUSE_STACK ; Space for local stack (small)
-MsStack: ; Stack starts at end!
-ptr_MsStack DUINT 0 ; Place to store old stack offset
-seg_MsStack dw 0 ; Place to store old stack segment
-
- ALIGN 4
- dclb INT10_STACK ; Space for local stack (small)
-Int10Stack: ; Stack starts at end!
-ptr_Int10Stack DUINT 0 ; Place to store old stack offset
-seg_Int10Stack dw 0 ; Place to store old stack segment
-
- ALIGN 4
- dclb TIMER_STACK ; Space for local stack (small)
-TmStack: ; Stack starts at end!
-ptr_TmStack DUINT 0 ; Place to store old stack offset
-seg_TmStack dw 0 ; Place to store old stack segment
-
- ALIGN 4
- dclb TIMER_STACK ; Space for local stack (small)
-RtcStack: ; Stack starts at end!
-ptr_RtcStack DUINT 0 ; Place to store old stack offset
-seg_RtcStack dw 0 ; Place to store old stack segment
-RtcInside dw 0 ; Are we still handling current interrupt
-
- ALIGN 4
- dclb KEY_STACK ; Space for local stack (small)
-KyStack: ; Stack starts at end!
-ptr_KyStack DUINT 0 ; Place to store old stack offset
-seg_KyStack dw 0 ; Place to store old stack segment
-KyInside dw 0 ; Are we still handling current interrupt
-
- ALIGN 4
- dclb KEY_STACK ; Space for local stack (small)
-Ky15Stack: ; Stack starts at end!
-ptr_Ky15Stack DUINT 0 ; Place to store old stack offset
-seg_Ky15Stack dw 0 ; Place to store old stack segment
-
-TempSeg dw 0 ; Place to store stack segment
-
-cpublic _PM_pmsmxDataEnd
-
-enddataseg _pmsmx
-
-begcodeseg _pmsmx ; Start of code segment
-
-cpublic _PM_pmsmxCodeStart
-
-;----------------------------------------------------------------------------
-; PM_mouseISR - Mouse interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Interrupt subroutine called by the mouse driver upon interrupts, to
-; dispatch control to high level C based subroutines. Interrupts are on
-; when we call the user code.
-;
-; It is _extremely_ important to save the state of the extended registers
-; as these may well be trashed by the routines called from here and not
-; restored correctly by the mouse interface module.
-;
-; NOTE: This routine switches to a local stack before calling any C code,
-; and hence is _not_ re-entrant. For mouse handlers this is not a
-; problem, as the mouse driver arbitrates calls to the user mouse
-; handler for us.
-;
-; Entry: AX - Condition mask giving reason for call
-; BX - Mouse button state
-; CX - Horizontal cursor coordinate
-; DX - Vertical cursor coordinate
-; SI - Horizontal mickey value
-; DI - Vertical mickey value
-;
-;----------------------------------------------------------------------------
-cprocfar _PM_mouseISR
-
- push ds ; Save value of DS
- push es
- pushad ; Save _all_ extended registers
- cld ; Clear direction flag
-
- LOAD_DS ; Load DS register
- NEWSTK MsStack ; Switch to local stack
-
-; Call the installed high level C code routine
-
- clrhi dx ; Clear out high order values
- clrhi cx
- clrhi bx
- clrhi ax
- sgnhi si
- sgnhi di
-
- push _di
- push _si
- push _dx
- push _cx
- push _bx
- push _ax
- sti ; Enable interrupts
- call [CPTR _PM_mouseHandler]
- _add sp,12,24
-
- RESTSTK MsStack ; Restore previous stack
-
- popad ; Restore all extended registers
- pop es
- pop ds
- ret ; We are done!!
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_timerISR - Timer interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the timer interrupt, to dispatch control
-; to high level C based subroutines. We save the state of all registers
-; in this routine, and switch to a local stack. Interrupts are *off*
-; when we call the user code.
-;
-; NOTE: This routine switches to a local stack before calling any C code,
-; and hence is _not_ re-entrant. Make sure your C code executes as
-; quickly as possible, since a timer overrun will simply hang the
-; system.
-;----------------------------------------------------------------------------
-cprocfar _PM_timerISR
-
- push ds ; Save value of DS
- push es
- pushad ; Save _all_ extended registers
- cld ; Clear direction flag
-
- LOAD_DS ; Load DS register
-
- NEWSTK TmStack ; Switch to local stack
- call [CPTR _PM_timerHandler]
- RESTSTK TmStack ; Restore previous stack
-
- popad ; Restore all extended registers
- pop es
- pop ds
- iret ; Return from interrupt
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_chainPrevTimer - Chain to previous timer interrupt and return
-;----------------------------------------------------------------------------
-; Chains to the previous timer interrupt routine and returns control
-; back to the high level interrupt handler.
-;----------------------------------------------------------------------------
-cprocstart PM_chainPrevTimer
-
-ifdef TNT
- push eax
- push ebx
- push ecx
- pushfd ; Push flags on stack to simulate interrupt
- mov ax,250Eh ; Call real mode procedure function
- mov ebx,[_PM_prevRealTimer]
- mov ecx,1 ; Copy real mode flags to real mode stack
- int 21h ; Call the real mode code
- popfd
- pop ecx
- pop ebx
- pop eax
- ret
-else
- SWAPSTK TmStack ; Swap back to previous stack
- pushf ; Save state of interrupt flag
- pushf ; Push flags on stack to simulate interrupt
-ifdef USE_NASM
- call far dword [_PM_prevTimer]
-else
- call [_PM_prevTimer]
-endif
- popf ; Restore state of interrupt flag
- SWAPSTK TmStack ; Swap back to C stack again
- ret
-endif
-
-cprocend
-
-; Macro to delay briefly to ensure that enough time has elapsed between
-; successive I/O accesses so that the device being accessed can respond
-; to both accesses even on a very fast PC.
-
-ifdef USE_NASM
-%macro DELAY 0
- jmp short $+2
- jmp short $+2
- jmp short $+2
-%endmacro
-%macro IODELAYN 1
-%rep %1
- DELAY
-%endrep
-%endmacro
-else
-macro DELAY
- jmp short $+2
- jmp short $+2
- jmp short $+2
-endm
-macro IODELAYN N
- rept N
- DELAY
- endm
-endm
-endif
-
-;----------------------------------------------------------------------------
-; PM_rtcISR - Real time clock interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the timer interrupt, to dispatch control
-; to high level C based subroutines. We save the state of all registers
-; in this routine, and switch to a local stack. Interrupts are *off*
-; when we call the user code.
-;
-; NOTE: This routine switches to a local stack before calling any C code,
-; and hence is _not_ re-entrant. Make sure your C code executes as
-; quickly as possible, since a timer overrun will simply hang the
-; system.
-;----------------------------------------------------------------------------
-cprocfar _PM_rtcISR
-
- push ds ; Save value of DS
- push es
- pushad ; Save _all_ extended registers
- cld ; Clear direction flag
-
-; Clear priority interrupt controller and re-enable interrupts so we
-; dont lock things up for long.
-
- mov al,20h
- out 0A0h,al
- out 020h,al
-
-; Clear real-time clock timeout
-
- in al,70h ; Read CMOS index register
- push _ax ; and save for later
- IODELAYN 3
- mov al,0Ch
- out 70h,al
- IODELAYN 5
- in al,71h
-
-; Call the C interrupt handler function
-
- LOAD_DS ; Load DS register
- cmp [BYTE RtcInside],1 ; Check for mutual exclusion
- je @@Exit
- mov [BYTE RtcInside],1
- sti ; Re-enable interrupts
- NEWSTK RtcStack ; Switch to local stack
- call [CPTR _PM_rtcHandler]
- RESTSTK RtcStack ; Restore previous stack
- mov [BYTE RtcInside],0
-
-@@Exit: pop _ax
- out 70h,al ; Restore CMOS index register
- popad ; Restore all extended registers
- pop es
- pop ds
- iret ; Return from interrupt
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_keyISR - keyboard interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the keyboard interrupt, to dispatch control
-; to high level C based subroutines. We save the state of all registers
-; in this routine, and switch to a local stack. Interrupts are *off*
-; when we call the user code.
-;
-; NOTE: This routine switches to a local stack before calling any C code,
-; and hence is _not_ re-entrant. However we ensure within this routine
-; mutual exclusion to the keyboard handling routine.
-;----------------------------------------------------------------------------
-cprocfar _PM_keyISR
-
- push ds ; Save value of DS
- push es
- pushad ; Save _all_ extended registers
- cld ; Clear direction flag
-
- LOAD_DS ; Load DS register
-
- cmp [BYTE KyInside],1 ; Check for mutual exclusion
- je @@Reissued
-
- mov [BYTE KyInside],1
- NEWSTK KyStack ; Switch to local stack
- call [CPTR _PM_keyHandler] ; Call C code
- RESTSTK KyStack ; Restore previous stack
- mov [BYTE KyInside],0
-
-@@Exit: popad ; Restore all extended registers
- pop es
- pop ds
- iret ; Return from interrupt
-
-; When the BIOS keyboard handler needs to change the SHIFT status lights
-; on the keyboard, in the process of doing this the keyboard controller
-; re-issues another interrupt, while the current handler is still executing.
-; If we recieve another interrupt while still handling the current one,
-; then simply chain directly to the previous handler.
-;
-; Note that for most DOS extenders, the real mode interrupt handler that we
-; install takes care of this for us.
-
-@@Reissued:
-ifdef TNT
- push eax
- push ebx
- push ecx
- pushfd ; Push flags on stack to simulate interrupt
- mov ax,250Eh ; Call real mode procedure function
- mov ebx,[_PM_prevRealKey]
- mov ecx,1 ; Copy real mode flags to real mode stack
- int 21h ; Call the real mode code
- popfd
- pop ecx
- pop ebx
- pop eax
-else
- pushf
-ifdef USE_NASM
- call far dword [_PM_prevKey]
-else
- call [_PM_prevKey]
-endif
-endif
- jmp @@Exit
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_chainPrevkey - Chain to previous key interrupt and return
-;----------------------------------------------------------------------------
-; Chains to the previous key interrupt routine and returns control
-; back to the high level interrupt handler.
-;----------------------------------------------------------------------------
-cprocstart PM_chainPrevKey
-
-ifdef TNT
- push eax
- push ebx
- push ecx
- pushfd ; Push flags on stack to simulate interrupt
- mov ax,250Eh ; Call real mode procedure function
- mov ebx,[_PM_prevRealKey]
- mov ecx,1 ; Copy real mode flags to real mode stack
- int 21h ; Call the real mode code
- popfd
- pop ecx
- pop ebx
- pop eax
- ret
-else
-
-; YIKES! For some strange reason, when execution returns from the
-; previous keyboard handler, interrupts are re-enabled!! Since we expect
-; interrupts to remain off during the duration of our handler, this can
-; cause havoc. However our stack macros always turn off interrupts, so they
-; will be off when we exit this routine. Obviously there is a tiny weeny
-; window when interrupts will be enabled, but there is nothing we can
-; do about this.
-
- SWAPSTK KyStack ; Swap back to previous stack
- pushf ; Push flags on stack to simulate interrupt
-ifdef USE_NASM
- call far dword [_PM_prevKey]
-else
- call [_PM_prevKey]
-endif
- SWAPSTK KyStack ; Swap back to C stack again
- ret
-endif
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_key15ISR - Int 15h keyboard interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; This routine gets called if we have been called to handle the Int 15h
-; keyboard interrupt callout from real mode.
-;
-; Entry: AX - Hardware scan code to process
-; Exit: AX - Hardware scan code to process (0 to ignore)
-;----------------------------------------------------------------------------
-cprocfar _PM_key15ISR
-
- push ds
- push es
- LOAD_DS
- cmp ah,4Fh
- jnz @@NotOurs ; Quit if not keyboard callout
-
- pushad
- cld ; Clear direction flag
- xor ah,ah ; AX := scan code
- NEWSTK Ky15Stack ; Switch to local stack
- push _ax
- call [CPTR _PM_key15Handler] ; Call C code
- _add sp,2,4
- RESTSTK Ky15Stack ; Restore previous stack
- test ax,ax
- jz @@1
- stc ; Set carry to process as normal
- jmp @@2
-@@1: clc ; Clear carry to ignore scan code
-@@2: popad
- jmp @@Exit ; We are done
-
-@@NotOurs:
-ifdef TNT
- push eax
- push ebx
- push ecx
- pushfd ; Push flags on stack to simulate interrupt
- mov ax,250Eh ; Call real mode procedure function
- mov ebx,[_PM_prevRealKey15]
- mov ecx,1 ; Copy real mode flags to real mode stack
- int 21h ; Call the real mode code
- popfd
- pop ecx
- pop ebx
- pop eax
-else
- pushf
-ifdef USE_NASM
- call far dword [_PM_prevKey15]
-else
- call [_PM_prevKey15]
-endif
-endif
-@@Exit: pop es
- pop ds
- retf 4
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_breakISR - Control Break interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the Ctrl-Break interrupt. We simply set
-; the Ctrl-Break flag to a 1 and leave (note that this is accessed through
-; a far pointer, as it may well be located in conventional memory).
-;----------------------------------------------------------------------------
-cprocfar _PM_breakISR
-
- sti
- push ds ; Save value of DS
- push es
- push _bx
-
- LOAD_DS ; Load DS register
- mov ebx,[_PM_ctrlBPtr]
- mov [UINT _ES _bx],1
-
-; Run alternate break handler code if installed
-
- cmp [CPTR _PM_breakHandler],0
- je @@Exit
-
- pushad
- mov _ax,1
- push _ax
- call [CPTR _PM_breakHandler] ; Call C code
- pop _ax
- popad
-
-@@Exit: pop _bx
- pop es
- pop ds
- iret ; Return from interrupt
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_ctrlBreakHit(int clearFlag)
-;----------------------------------------------------------------------------
-; Returns the current state of the Ctrl-Break flag and possibly clears it.
-;----------------------------------------------------------------------------
-cprocstart PM_ctrlBreakHit
-
- ARG clearFlag:UINT
-
- enter_c
- pushf ; Save interrupt status
- push es
- mov ebx,[_PM_ctrlBPtr]
- cli ; No interrupts thanks!
- mov _ax,[_ES _bx]
- test [BYTE clearFlag],1
- jz @@Done
- mov [UINT _ES _bx],0
-
-@@Done: pop es
- popf ; Restore interrupt status
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_ctrlCISR - Control Break interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Hardware interrupt handler for the Ctrl-C interrupt. We simply set
-; the Ctrl-C flag to a 1 and leave (note that this is accessed through
-; a far pointer, as it may well be located in conventional memory).
-;----------------------------------------------------------------------------
-cprocfar _PM_ctrlCISR
-
- sti
- push ds ; Save value of DS
- push es
- push _bx
-
- LOAD_DS ; Load DS register
- mov ebx,[_PM_ctrlCPtr]
- mov [UINT _ES _bx],1
-
-; Run alternate break handler code if installed
-
- cmp [CPTR _PM_breakHandler],0
- je @@Exit
-
- pushad
- mov _ax,0
- push _ax
- call [CPTR _PM_breakHandler] ; Call C code
- pop _ax
- popad
-
-@@Exit: pop _bx
- pop es
- pop ds
- iret ; Return from interrupt
- iretd
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_ctrlCHit(int clearFlag)
-;----------------------------------------------------------------------------
-; Returns the current state of the Ctrl-C flag and possibly clears it.
-;----------------------------------------------------------------------------
-cprocstart PM_ctrlCHit
-
- ARG clearFlag:UINT
-
- enter_c
- pushf ; Save interrupt status
- push es
- mov ebx,[_PM_ctrlCPtr]
- cli ; No interrupts thanks!
- mov _ax,[_ES _bx]
- test [BYTE clearFlag],1
- jz @@Done
- mov [UINT _ES _bx],0
-
-@@Done:
- pop es
- popf ; Restore interrupt status
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PM_criticalISR - Control Error handler interrupt subroutine dispatcher
-;----------------------------------------------------------------------------
-; Interrupt handler for the MSDOS Critical Error interrupt, to dispatch
-; control to high level C based subroutines. We save the state of all
-; registers in this routine, and switch to a local stack. We also pass
-; the values of the AX and DI registers to the as pointers, so that the
-; values can be modified before returning to MSDOS.
-;----------------------------------------------------------------------------
-cprocfar _PM_criticalISR
-
- sti
- push ds ; Save value of DS
- push es
- push _bx ; Save register values changed
- cld ; Clear direction flag
-
- LOAD_DS ; Load DS register
- mov ebx,[_PM_critPtr]
- mov [_ES _bx],ax
- mov [_ES _bx+2],di
-
-; Run alternate critical handler code if installed
-
- cmp [CPTR _PM_critHandler],0
- je @@NoAltHandler
-
- pushad
- push _di
- push _ax
- call [CPTR _PM_critHandler] ; Call C code
- _add sp,4,8
- popad
-
- pop _bx
- pop es
- pop ds
- iret ; Return from interrupt
-
-@@NoAltHandler:
- mov ax,3 ; Tell MSDOS to fail the operation
- pop _bx
- pop es
- pop ds
- iret ; Return from interrupt
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_criticalError(int *axVal,int *diVal,int clearFlag)
-;----------------------------------------------------------------------------
-; Returns the current state of the critical error flags, and the values that
-; MSDOS passed in the AX and DI registers to our handler.
-;----------------------------------------------------------------------------
-cprocstart PM_criticalError
-
- ARG axVal:DPTR, diVal:DPTR, clearFlag:UINT
-
- enter_c
- pushf ; Save interrupt status
- push es
- mov ebx,[_PM_critPtr]
- cli ; No interrupts thanks!
- xor _ax,_ax
- xor _di,_di
- mov ax,[_ES _bx]
- mov di,[_ES _bx+2]
- test [BYTE clearFlag],1
- jz @@NoClear
- mov [ULONG _ES _bx],0
-@@NoClear:
- _les _bx,[axVal]
- mov [_ES _bx],_ax
- _les _bx,[diVal]
- mov [_ES _bx],_di
- pop es
- popf ; Restore interrupt status
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setMouseHandler(int mask, PM_mouseHandler mh)
-;----------------------------------------------------------------------------
-cprocstart _PM_setMouseHandler
-
- ARG mouseMask:UINT
-
- enter_c
- push es
-
- mov ax,0Ch ; AX := Function 12 - install interrupt sub
- mov _cx,[mouseMask] ; CX := mouse mask
- mov _dx,offset _PM_mouseISR
- push cs
- pop es ; ES:_DX -> mouse handler
- int 33h ; Call mouse driver
-
- pop es
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_mousePMCB(void)
-;----------------------------------------------------------------------------
-; Mouse realmode callback routine. Upon entry to this routine, we recieve
-; the following from the DPMI server:
-;
-; Entry: DS:_SI -> Real mode stack at time of call
-; ES:_DI -> Real mode register data structure
-; SS:_SP -> Locked protected mode stack to use
-;----------------------------------------------------------------------------
-cprocfar _PM_mousePMCB
-
- pushad
- mov eax,[es:_di+1Ch] ; Load register values from real mode
- mov ebx,[es:_di+10h]
- mov ecx,[es:_di+18h]
- mov edx,[es:_di+14h]
- mov esi,[es:_di+04h]
- mov edi,[es:_di]
- call _PM_mouseISR ; Call the mouse handler
- popad
-
- mov ax,[ds:_si]
- mov [es:_di+2Ah],ax ; Plug in return IP address
- mov ax,[ds:_si+2]
- mov [es:_di+2Ch],ax ; Plug in return CS value
- add [WORD es:_di+2Eh],4 ; Remove return address from stack
- iret ; Go back to real mode!
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_int10PMCB(void)
-;----------------------------------------------------------------------------
-; int10 realmode callback routine. Upon entry to this routine, we recieve
-; the following from the DPMI server:
-;
-; Entry: DS:ESI -> Real mode stack at time of call
-; ES:EDI -> Real mode register data structure
-; SS:ESP -> Locked protected mode stack to use
-;----------------------------------------------------------------------------
-cprocfar _PM_int10PMCB
-
- pushad
- push ds
- push es
- push fs
-
- pushfd
- pop eax
- mov [es:edi+20h],ax ; Save return flag status
- mov ax,[ds:esi]
- mov [es:edi+2Ah],ax ; Plug in return IP address
- mov ax,[ds:esi+2]
- mov [es:edi+2Ch],ax ; Plug in return CS value
- add [WORD es:edi+2Eh],4 ; Remove return address from stack
-
-; Call the install int10 handler in protected mode. This function gets called
-; with DS set to the current data selector, and ES:EDI pointing the the
-; real mode DPMI register structure at the time of the interrupt. The
-; handle must be written in assembler to be able to extract the real mode
-; register values from the structure
-
- push es
- pop fs ; FS:EDI -> real mode registers
- LOAD_DS
- NEWSTK Int10Stack ; Switch to local stack
-
- call [_PM_int10Handler]
-
- RESTSTK Int10Stack ; Restore previous stack
- pop fs
- pop es
- pop ds
- popad
- iret ; Go back to real mode!
-
-cprocend
-
-cpublic _PM_pmsmxCodeEnd
-
-endcodeseg _pmsmx
-
- END ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/_vflat.asm b/board/MAI/bios_emulator/scitech/src/pm/smx/_vflat.asm
deleted file mode 100644
index 34985a9d8b..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/_vflat.asm
+++ /dev/null
@@ -1,652 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Based on original code Copyright 1994 Otto Chrons
-;*
-;* Language: 80386 Assembler, TASM 4.0 or later
-;* Environment: IBM PC 32 bit protected mode
-;*
-;* Description: Low level page fault handler for virtual linear framebuffers.
-;*
-;****************************************************************************
-
- IDEAL
- JUMPS
-
-include "scitech.mac" ; Memory model macros
-
-header _vflat ; Set up memory model
-
-VFLAT_START EQU 0F0000000h
-VFLAT_END EQU 0F03FFFFFh
-PAGE_PRESENT EQU 1
-PAGE_NOTPRESENT EQU 0
-PAGE_READ EQU 0
-PAGE_WRITE EQU 2
-
-ifdef DOS4GW
-
-;----------------------------------------------------------------------------
-; DOS4G/W flat linear framebuffer emulation.
-;----------------------------------------------------------------------------
-
-begdataseg _vflat
-
-; Near pointers to the page directory base and our page tables. All of
-; this memory is always located in the first Mb of DOS memory.
-
-PDBR dd 0 ; Page directory base register (CR3)
-accessPageAddr dd 0
-accessPageTable dd 0
-
-; CauseWay page directory & 1st page table linear addresses.
-
-CauseWayDIRLinear dd 0
-CauseWay1stLinear dd 0
-
-; Place to store a copy of the original Page Table Directory before we
-; intialised our virtual buffer code.
-
-pageDirectory: resd 1024 ; Saved page table directory
-
-ValidCS dw 0 ; Valid CS for page faults
-Ring0CS dw 0 ; Our ring 0 code selector
-LastPage dd 0 ; Last page we mapped in
-BankFuncBuf: resb 101 ; Place to store bank switch code
-BankFuncPtr dd offset BankFuncBuf
-
-INT14Gate:
-INT14Offset dd 0 ; eip of original vector
-INT14Selector dw 0 ; cs of original vector
-
- cextern _PM_savedDS,USHORT
- cextern VF_haveCauseWay,BOOL
-
-enddataseg _vflat
-
-begcodeseg _vflat ; Start of code segment
-
- cextern VF_malloc,FPTR
-
-;----------------------------------------------------------------------------
-; PF_handler64k - Page fault handler for 64k banks
-;----------------------------------------------------------------------------
-; The handler below is a 32 bit ring 0 page fault handler. It receives
-; control immediately after any page fault or after an IRQ6 (hardware
-; interrupt). This provides the fastest possible handling of page faults
-; since it jump directly here. If this is a page fault, the number
-; immediately on the stack will be an error code, at offset 4 will be
-; the eip of the faulting instruction, at offset 8 will be the cs of the
-; faulting instruction. If it is a hardware interrupt, it will not have
-; the error code and the eflags will be at offset 8.
-;----------------------------------------------------------------------------
-cprocfar PF_handler64k
-
-; Check if this is a processor exeception or a page fault
-
- push eax
- mov ax,[cs:ValidCS] ; Use CS override to access data
- cmp [ss:esp+12],ax ; Is this a page fault?
- jne @@ToOldHandler ; Nope, jump to the previous handler
-
-; Get address of page fault and check if within our handlers range
-
- mov eax,cr2 ; EBX has page fault linear address
- cmp eax,VFLAT_START ; Is the fault less than ours?
- jb @@ToOldHandler ; Yep, go to previous handler
- cmp eax,VFLAT_END ; Is the fault more than ours?
- jae @@ToOldHandler ; Yep, go to previous handler
-
-; This is our page fault, so we need to handle it
-
- pushad
- push ds
- push es
- mov ebx,eax ; EBX := page fault address
- and ebx,invert 0FFFFh ; Mask to 64k bank boundary
- mov ds,[cs:_PM_savedDS]; Load segment registers
- mov es,[cs:_PM_savedDS]
-
-; Map in the page table for our virtual framebuffer area for modification
-
- mov edi,[PDBR] ; EDI points to page directory
- mov edx,ebx ; EDX = linear address
- shr edx,22 ; EDX = offset to page directory
- mov edx,[edx*4+edi] ; EDX = physical page table address
- mov eax,edx
- mov edx,[accessPageTable]
- or eax,7
- mov [edx],eax
- mov eax,cr3
- mov cr3,eax ; Update page table cache
-
-; Mark all pages valid for the new page fault area
-
- mov esi,ebx ; ESI := linear address for page
- shr esi,10
- and esi,0FFFh ; Offset into page table
- add esi,[accessPageAddr]
-ifdef USE_NASM
-%assign off 0
-%rep 16
- or [DWORD esi+off],0000000001h ; Enable pages
-%assign off off+4
-%endrep
-else
-off = 0
-REPT 16
- or [DWORD esi+off],0000000001h ; Enable pages
-off = off+4
-ENDM
-endif
-
-; Mark all pages invalid for the previously mapped area
-
- xchg esi,[LastPage] ; Save last page for next page fault
- test esi,esi
- jz @@DoneMapping ; Dont update if first time round
-ifdef USE_NASM
-%assign off 0
-%rep 16
- or [DWORD esi+off],0FFFFFFFEh ; Disable pages
-%assign off off+4
-%endrep
-else
-off = 0
-REPT 16
- and [DWORD esi+off],0FFFFFFFEh ; Disable pages
-off = off+4
-ENDM
-endif
-
-@@DoneMapping:
- mov eax,cr3
- mov cr3,eax ; Flush the TLB
-
-; Now program the new SuperVGA starting bank address
-
- mov eax,ebx ; EAX := page fault address
- shr eax,16
- and eax,0FFh ; Mask to 0-255
- call [BankFuncPtr] ; Call the bank switch function
-
- pop es
- pop ds
- popad
- pop eax
- add esp,4 ; Pop the error code from stack
- iretd ; Return to faulting instruction
-
-@@ToOldHandler:
- pop eax
-ifdef USE_NASM
- jmp far dword [cs:INT14Gate]; Chain to previous handler
-else
- jmp [FWORD cs:INT14Gate]; Chain to previous handler
-endif
-
-cprocend
-
-;----------------------------------------------------------------------------
-; PF_handler4k - Page fault handler for 4k banks
-;----------------------------------------------------------------------------
-; The handler below is a 32 bit ring 0 page fault handler. It receives
-; control immediately after any page fault or after an IRQ6 (hardware
-; interrupt). This provides the fastest possible handling of page faults
-; since it jump directly here. If this is a page fault, the number
-; immediately on the stack will be an error code, at offset 4 will be
-; the eip of the faulting instruction, at offset 8 will be the cs of the
-; faulting instruction. If it is a hardware interrupt, it will not have
-; the error code and the eflags will be at offset 8.
-;----------------------------------------------------------------------------
-cprocfar PF_handler4k
-
-; Fill in when we have tested all the 64Kb code
-
-ifdef USE_NASM
- jmp far dword [cs:INT14Gate]; Chain to previous handler
-else
- jmp [FWORD cs:INT14Gate]; Chain to previous handler
-endif
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void InstallFaultHandler(void *baseAddr,int bankSize)
-;----------------------------------------------------------------------------
-; Installes the page fault handler directly int the interrupt descriptor
-; table for maximum performance. This of course requires ring 0 access,
-; but none of this stuff will run without ring 0!
-;----------------------------------------------------------------------------
-cprocstart InstallFaultHandler
-
- ARG baseAddr:ULONG, bankSize:UINT
-
- enter_c
-
- mov [DWORD LastPage],0 ; No pages have been mapped
- mov ax,cs
- mov [ValidCS],ax ; Save CS value for page faults
-
-; Put address of our page fault handler into the IDT directly
-
- sub esp,6 ; Allocate space on stack
-ifdef USE_NASM
- sidt [ss:esp] ; Store pointer to IDT
-else
- sidt [FWORD ss:esp] ; Store pointer to IDT
-endif
- pop ax ; add esp,2
- pop eax ; Absolute address of IDT
- add eax,14*8 ; Point to Int #14
-
-; Note that Interrupt gates do not have the high and low word of the
-; offset in adjacent words in memory, there are 4 bytes separating them.
-
- mov ecx,[eax] ; Get cs and low 16 bits of offset
- mov edx,[eax+6] ; Get high 16 bits of offset in dx
- shl edx,16
- mov dx,cx ; edx has offset
- mov [INT14Offset],edx ; Save offset
- shr ecx,16
- mov [INT14Selector],cx ; Save original cs
- mov [eax+2],cs ; Install new cs
- mov edx,offset PF_handler64k
- cmp [UINT bankSize],4
- jne @@1
- mov edx,offset PF_handler4k
-@@1: mov [eax],dx ; Install low word of offset
- shr edx,16
- mov [eax+6],dx ; Install high word of offset
-
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void RemoveFaultHandler(void)
-;----------------------------------------------------------------------------
-; Closes down the virtual framebuffer services and restores the previous
-; page fault handler.
-;----------------------------------------------------------------------------
-cprocstart RemoveFaultHandler
-
- enter_c
-
-; Remove page fault handler from IDT
-
- sub esp,6 ; Allocate space on stack
-ifdef USE_NASM
- sidt [ss:esp] ; Store pointer to IDT
-else
- sidt [FWORD ss:esp] ; Store pointer to IDT
-endif
-
- pop ax ; add esp,2
- pop eax ; Absolute address of IDT
- add eax,14*8 ; Point to Int #14
- mov cx,[INT14Selector]
- mov [eax+2],cx ; Restore original CS
- mov edx,[INT14Offset]
- mov [eax],dx ; Install low word of offset
- shr edx,16
- mov [eax+6],dx ; Install high word of offset
-
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void InstallBankFunc(int codeLen,void *bankFunc)
-;----------------------------------------------------------------------------
-; Installs the bank switch function by relocating it into our data segment
-; and making it into a callable function. We do it this way to make the
-; code identical to the way that the VflatD devices work under Windows.
-;----------------------------------------------------------------------------
-cprocstart InstallBankFunc
-
- ARG codeLen:UINT, bankFunc:DPTR
-
- enter_c
-
- mov esi,[bankFunc] ; Copy the code into buffer
- mov edi,offset BankFuncBuf
- mov ecx,[codeLen]
- rep movsb
- mov [BYTE edi],0C3h ; Terminate the function with a near ret
-
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int InitPaging(void)
-;----------------------------------------------------------------------------
-; Initializes paging system. If paging is not enabled, builds a page table
-; directory and page tables for physical memory
-;
-; Exit: 0 - Successful
-; -1 - Couldn't initialize paging mechanism
-;----------------------------------------------------------------------------
-cprocstart InitPaging
-
- push ebx
- push ecx
- push edx
- push esi
- push edi
-
-; Are we running under CauseWay?
-
- mov ax,0FFF9h
- int 31h
- jc @@NotCauseway
- cmp ecx,"CAUS"
- jnz @@NotCauseway
- cmp edx,"EWAY"
- jnz @@NotCauseway
-
- mov [BOOL VF_haveCauseWay],1
- mov [CauseWayDIRLinear],esi
- mov [CauseWay1stLinear],edi
-
-; Check for DPMI
-
- mov ax,0ff00h
- push es
- int 31h
- pop es
- shr edi,2
- and edi,3
- cmp edi,2
- jz @@ErrExit ; Not supported under DPMI
-
- mov eax,[CauseWayDIRLinear]
- jmp @@CopyCR3
-
-@@NotCauseway:
- mov ax,cs
- test ax,3 ; Which ring are we running
- jnz @@ErrExit ; Needs zero ring to access
- ; page tables (CR3)
- mov eax,cr0 ; Load CR0
- test eax,80000000h ; Is paging enabled?
- jz @@ErrExit ; No, we must have paging!
-
- mov eax,cr3 ; Load directory address
- and eax,0FFFFF000h
-
-@@CopyCR3:
- mov [PDBR],eax ; Save it
- mov esi,eax
- mov edi,offset pageDirectory
- mov ecx,1024
- cld
- rep movsd ; Copy the original page table directory
- cmp [DWORD accessPageAddr],0; Check if we have allocated page
- jne @@HaveRealMem ; table already (we cant free it)
-
- mov eax,0100h ; DPMI DOS allocate
- mov ebx,8192/16
- int 31h ; Allocate 8192 bytes
- and eax,0FFFFh
- shl eax,4 ; EAX points to newly allocated memory
- add eax,4095
- and eax,0FFFFF000h ; Page align
- mov [accessPageAddr],eax
-
-@@HaveRealMem:
- mov eax,[accessPageAddr] ; EAX -> page table in 1st Mb
- shr eax,12
- and eax,3FFh ; Page table offset
- shl eax,2
- cmp [BOOL VF_haveCauseWay],0
- jz @@NotCW0
- mov ebx,[CauseWay1stLinear]
- jmp @@Put1st
-
-@@NotCW0:
- mov ebx,[PDBR]
- mov ebx,[ebx]
- and ebx,0FFFFF000h ; Page table for 1st megabyte
-
-@@Put1st:
- add eax,ebx
- mov [accessPageTable],eax
- sub eax,eax ; No error
- jmp @@Exit
-
-@@ErrExit:
- mov eax,-1
-
-@@Exit: pop edi
- pop esi
- pop edx
- pop ecx
- pop ebx
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void ClosePaging(void)
-;----------------------------------------------------------------------------
-; Closes the paging system
-;----------------------------------------------------------------------------
-cprocstart ClosePaging
-
- push eax
- push ecx
- push edx
- push esi
- push edi
-
- mov eax,[accessPageAddr]
- call AccessPage ; Restore AccessPage mapping
- mov edi,[PDBR]
- mov esi,offset pageDirectory
- mov ecx,1024
- cld
- rep movsd ; Restore the original page table directory
-
-@@Exit: pop edi
- pop esi
- pop edx
- pop ecx
- pop eax
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; long AccessPage(long phys)
-;----------------------------------------------------------------------------
-; Maps a known page to given physical memory
-; Entry: EAX - Physical memory
-; Exit: EAX - Linear memory address of mapped phys mem
-;----------------------------------------------------------------------------
-cprocstatic AccessPage
-
- push edx
- mov edx,[accessPageTable]
- or eax,7
- mov [edx],eax
- mov eax,cr3
- mov cr3,eax ; Update page table cache
- mov eax,[accessPageAddr]
- pop edx
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; long GetPhysicalAddress(long linear)
-;----------------------------------------------------------------------------
-; Returns the physical address of linear address
-; Entry: EAX - Linear address to convert
-; Exit: EAX - Physical address
-;----------------------------------------------------------------------------
-cprocstatic GetPhysicalAddress
-
- push ebx
- push edx
- mov edx,eax
- shr edx,22 ; EDX is the directory offset
- mov ebx,[PDBR]
- mov edx,[edx*4+ebx] ; Load page table address
- push eax
- mov eax,edx
- call AccessPage ; Access the page table
- mov edx,eax
- pop eax
- shr eax,12
- and eax,03FFh ; EAX offset into page table
- mov eax,[edx+eax*4] ; Load physical address
- and eax,0FFFFF000h
- pop edx
- pop ebx
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void CreatePageTable(long pageDEntry)
-;----------------------------------------------------------------------------
-; Creates a page table for specific address (4MB)
-; Entry: EAX - Page directory entry (top 10-bits of address)
-;----------------------------------------------------------------------------
-cprocstatic CreatePageTable
-
- push ebx
- push ecx
- push edx
- push edi
- mov ebx,eax ; Save address
- mov eax,8192
- push eax
- call VF_malloc ; Allocate page table directory
- add esp,4
- add eax,0FFFh
- and eax,0FFFFF000h ; Page align (4KB)
- mov edi,eax ; Save page table linear address
- sub eax,eax ; Fill with zero
- mov ecx,1024
- cld
- rep stosd ; Clear page table
- sub edi,4096
- mov eax,edi
- call GetPhysicalAddress
- mov edx,[PDBR]
- or eax,7 ; Present/write/user bit
- mov [edx+ebx*4],eax ; Save physical address into page directory
- mov eax,cr3
- mov cr3,eax ; Update page table cache
- pop edi
- pop edx
- pop ecx
- pop ebx
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void MapPhysical2Linear(ulong pAddr, ulong lAddr, int pages, int flags);
-;----------------------------------------------------------------------------
-; Maps physical memory into linear memory
-; Entry: pAddr - Physical address
-; lAddr - Linear address
-; pages - Number of 4K pages to map
-; flags - Page flags
-; bit 0 = present
-; bit 1 = Read(0)/Write(1)
-;----------------------------------------------------------------------------
-cprocstart MapPhysical2Linear
-
- ARG pAddr:ULONG, lAddr:ULONG, pages:UINT, pflags:UINT
-
- enter_c
-
- and [ULONG pAddr],0FFFFF000h; Page boundary
- and [ULONG lAddr],0FFFFF000h; Page boundary
- mov ecx,[pflags]
- and ecx,11b ; Just two bits
- or ecx,100b ; Supervisor bit
- mov [pflags],ecx
-
- mov edx,[lAddr]
- shr edx,22 ; EDX = Directory
- mov esi,[PDBR]
- mov edi,[pages] ; EDI page count
- mov ebx,[lAddr]
-
-@@CreateLoop:
- mov ecx,[esi+edx*4] ; Load page table address
- test ecx,1 ; Is it present?
- jnz @@TableOK
- mov eax,edx
- call CreatePageTable ; Create a page table
-@@TableOK:
- mov eax,ebx
- shr eax,12
- and eax,3FFh
- sub eax,1024
- neg eax ; EAX = page count in this table
- inc edx ; Next table
- mov ebx,0 ; Next time we'll map 1K pages
- sub edi,eax ; Subtract mapped pages from page count
- jns @@CreateLoop ; Create more tables if necessary
-
- mov ecx,[pages] ; ECX = Page count
- mov esi,[lAddr]
- shr esi,12 ; Offset part isn't needed
- mov edi,[pAddr]
-@@MappingLoop:
- mov eax,esi
- shr eax,10 ; EAX = offset to page directory
- mov ebx,[PDBR]
- mov eax,[eax*4+ebx] ; EAX = page table address
- call AccessPage
- mov ebx,esi
- and ebx,3FFh ; EBX = offset to page table
- mov edx,edi
- add edi,4096 ; Next physical address
- inc esi ; Next linear page
- or edx,[pflags] ; Update flags...
- mov [eax+ebx*4],edx ; Store page table entry
- loop @@MappingLoop
- mov eax,cr3
- mov cr3,eax ; Update page table cache
-
- leave_c
- ret
-
-cprocend
-
-endcodeseg _vflat
-
-endif
-
- END ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/smx/cpuinfo.c
deleted file mode 100644
index 5447e574ec..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/cpuinfo.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit SMX embedded systems development.
-*
-* Description: SMX specific code for the CPU detection module.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* External timing function */
-
-void __ZTimerInit(void);
-
-/****************************************************************************
-REMARKS:
-Do nothing for DOS because we don't have thread priorities.
-****************************************************************************/
-#define SetMaxThreadPriority() 0
-
-/****************************************************************************
-REMARKS:
-Do nothing for DOS because we don't have thread priorities.
-****************************************************************************/
-#define RestoreThreadPriority(i) (void)(i)
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
- CPU_largeInteger *freq)
-{
- ulong resolution;
-
- __ZTimerInit();
- ULZTimerResolution(&resolution);
- freq->low = (ulong)(10000000000.0 / resolution);
- freq->high = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-****************************************************************************/
-#define GetCounter(t) \
-{ \
- (t)->low = ULZReadTime() * 10000L; \
- (t)->high = 0; \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/event.c b/board/MAI/bios_emulator/scitech/src/pm/smx/event.c
deleted file mode 100644
index 533c2615b1..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/event.c
+++ /dev/null
@@ -1,368 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit SMX embedded systems development
-*
-* Description: 32-bit SMX implementation for the SciTech cross platform
-* event library.
-*
-****************************************************************************/
-
-#include "smx/ps2mouse.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-ibool _VARAPI _EVT_useEvents = true; /* True to use event handling */
-ibool _VARAPI _EVT_installed = 0; /* Event handers installed? */
-uchar _VARAPI *_EVT_biosPtr = NULL; /* Pointer to the BIOS data area */
-static ibool haveMouse = false; /* True if we have a mouse */
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* External assembler functions */
-
-void EVTAPI _EVT_pollJoystick(void);
-uint EVTAPI _EVT_disableInt(void);
-uint EVTAPI _EVT_restoreInt(uint flags);
-void EVTAPI _EVT_codeStart(void);
-void EVTAPI _EVT_codeEnd(void);
-void EVTAPI _EVT_cCodeStart(void);
-void EVTAPI _EVT_cCodeEnd(void);
-int EVTAPI _EVT_getKeyCode(void);
-int EVTAPI EVT_rdinx(int port,int index);
-void EVTAPI EVT_wrinx(int port,int index,int value);
-
-/****************************************************************************
-REMARKS:
-Do nothing for DOS, because we are fully interrupt driven.
-****************************************************************************/
-#define _EVT_pumpMessages()
-
-/****************************************************************************
-REMARKS:
-This function is used to return the number of ticks since system
-startup in milliseconds. This should be the same value that is placed into
-the time stamp fields of events, and is used to implement auto mouse down
-events.
-****************************************************************************/
-ulong _EVT_getTicks(void)
-{
- return (ulong)PM_getLong(_EVT_biosPtr+0x6C) * 55UL;
-}
-
-/****************************************************************************
-REMARKS:
-Include generic raw scancode keyboard module.
-****************************************************************************/
-#include "common/keyboard.c"
-
-/****************************************************************************
-REMARKS:
-Determines if we have a mouse attached and functioning.
-****************************************************************************/
-static ibool detectMouse(void)
-{
- return(ps2Query());
-}
-
-/****************************************************************************
-PARAMETERS:
-what - Event code
-message - Event message
-x,y - Mouse position at time of event
-but_stat - Mouse button status at time of event
-
-REMARKS:
-Adds a new mouse event to the event queue. This routine is called from within
-the mouse interrupt subroutine, so it must be efficient.
-
-NOTE: Interrupts MUST be OFF while this routine is called to ensure we have
- mutually exclusive access to our internal data structures for
- interrupt driven systems (like under DOS).
-****************************************************************************/
-static void addMouseEvent(
- uint what,
- uint message,
- int x,
- int y,
- int mickeyX,
- int mickeyY,
- uint but_stat)
-{
- event_t evt;
-
- if (EVT.count < EVENTQSIZE) {
- /* Save information in event record. */
- evt.when = _EVT_getTicks();
- evt.what = what;
- evt.message = message;
- evt.modifiers = but_stat;
- evt.where_x = x; /* Save mouse event position */
- evt.where_y = y;
- evt.relative_x = mickeyX;
- evt.relative_y = mickeyY;
- evt.modifiers |= EVT.keyModifiers;
- addEvent(&evt); /* Add to tail of event queue */
- }
-}
-
-/****************************************************************************
-PARAMETERS:
-mask - Event mask
-butstate - Button state
-x - Mouse x coordinate
-y - Mouse y coordinate
-
-REMARKS:
-Mouse event handling routine. This gets called when a mouse event occurs,
-and we call the addMouseEvent() routine to add the appropriate mouse event
-to the event queue.
-
-Note: Interrupts are ON when this routine is called by the mouse driver code.
-/*AM: NOTE: This function has not actually been ported from DOS yet and should not */
-/*AM: be installed until it is. */
-****************************************************************************/
-static void EVTAPI mouseISR(
- uint mask,
- uint butstate,
- int x,
- int y,
- int mickeyX,
- int mickeyY)
-{
- RMREGS regs;
- uint ps;
-
- if (mask & 1) {
- /* Save the current mouse coordinates */
- EVT.mx = x; EVT.my = y;
-
- /* If the last event was a movement event, then modify the last
- * event rather than post a new one, so that the queue will not
- * become saturated. Before we modify the data structures, we
- * MUST ensure that interrupts are off.
- */
- ps = _EVT_disableInt();
- if (EVT.oldMove != -1) {
- EVT.evtq[EVT.oldMove].where_x = x; /* Modify existing one */
- EVT.evtq[EVT.oldMove].where_y = y;
- EVT.evtq[EVT.oldMove].relative_x += mickeyX;
- EVT.evtq[EVT.oldMove].relative_y += mickeyY;
- }
- else {
- EVT.oldMove = EVT.freeHead; /* Save id of this move event */
- addMouseEvent(EVT_MOUSEMOVE,0,x,y,mickeyX,mickeyY,butstate);
- }
- _EVT_restoreInt(ps);
- }
- if (mask & 0x2A) {
- ps = _EVT_disableInt();
- addMouseEvent(EVT_MOUSEDOWN,mask >> 1,x,y,0,0,butstate);
- EVT.oldMove = -1;
- _EVT_restoreInt(ps);
- }
- if (mask & 0x54) {
- ps = _EVT_disableInt();
- addMouseEvent(EVT_MOUSEUP,mask >> 2,x,y,0,0,butstate);
- EVT.oldMove = -1;
- _EVT_restoreInt(ps);
- }
- EVT.oldKey = -1;
-}
-
-/****************************************************************************
-REMARKS:
-Keyboard interrupt handler function.
-
-NOTE: Interrupts are OFF when this routine is called by the keyboard ISR,
- and we leave them OFF the entire time. This has been modified to work
- in conjunction with smx keyboard handler.
-****************************************************************************/
-static void EVTAPI keyboardISR(void)
-{
- PM_chainPrevKey();
- processRawScanCode(PM_inpb(0x60));
- PM_outpb(0x20,0x20);
-}
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort()
-{
- EVT_exit();
- PM_fatalError("Unhandled exception!");
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
- _EVT_mouseMoveHandler mouseMove)
-{
- int i;
-
- EVT.mouseMove = mouseMove;
- _EVT_biosPtr = PM_getBIOSPointer();
- EVT_resume();
-}
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVTAPI EVT_resume(void)
-{
- static int locked = 0;
- int stat;
- uchar mods;
- PM_lockHandle lh;
-
- if (_EVT_useEvents) {
- /* Initialise the event queue and enable our interrupt handlers */
- initEventQueue();
- PM_setKeyHandler(keyboardISR);
- if ((haveMouse = detectMouse()) != 0)
- PM_setMouseHandler(0xFFFF,mouseISR);
-
- /* Read the keyboard modifier flags from the BIOS to get the
- * correct initialisation state. The only state we care about is
- * the correct toggle state flags such as SCROLLLOCK, NUMLOCK and
- * CAPSLOCK.
- */
- EVT.keyModifiers = 0;
- mods = PM_getByte(_EVT_biosPtr+0x17);
- if (mods & 0x10)
- EVT.keyModifiers |= EVT_SCROLLLOCK;
- if (mods & 0x20)
- EVT.keyModifiers |= EVT_NUMLOCK;
- if (mods & 0x40)
- EVT.keyModifiers |= EVT_CAPSLOCK;
-
- /* Lock all of the code and data used by our protected mode interrupt
- * handling routines, so that it will continue to work correctly
- * under real mode.
- */
- if (!locked) {
- /* It is difficult to ensure that we lock our global data, so we
- * do this by taking the address of a variable locking all data
- * 2Kb on either side. This should properly cover the global data
- * used by the module (the other alternative is to declare the
- * variables in assembler, in which case we know it will be
- * correct).
- */
- stat = !PM_lockDataPages(&EVT,sizeof(EVT),&lh);
- stat |= !PM_lockDataPages(&_EVT_biosPtr,sizeof(_EVT_biosPtr),&lh);
- stat |= !PM_lockCodePages((__codePtr)_EVT_cCodeStart,(int)_EVT_cCodeEnd-(int)_EVT_cCodeStart,&lh);
- stat |= !PM_lockCodePages((__codePtr)_EVT_codeStart,(int)_EVT_codeEnd-(int)_EVT_codeStart,&lh);
- if (stat) {
- PM_fatalError("Page locking services failed - interrupt handling not safe!");
- exit(1);
- }
- locked = 1;
- }
-
- _EVT_installed = true;
- }
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
- int xRes,
- int yRes)
-{
- if (haveMouse) {
- ps2MouseStop();
- ps2MouseStart( 0, xRes, 0, yRes, -1, -1, -1);
- }
-}
-
-/****************************************************************************
-REMARKS
-Modifes the mouse coordinates as necessary if scaling to OS coordinates,
-and sets the OS mouse cursor position.
-****************************************************************************/
-void _EVT_setMousePos(
- int *x,
- int *y)
-{
- if (haveMouse)
- ps2MouseMove(*x, *y);
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVTAPI EVT_suspend(void)
-{
- uchar mods;
-
- if (_EVT_installed) {
- PM_restoreKeyHandler();
- if (haveMouse)
- PM_restoreMouseHandler();
-
- /* Set the keyboard modifier flags in the BIOS to our values */
- EVT_allowLEDS(true);
- mods = PM_getByte(_EVT_biosPtr+0x17) & ~0x70;
- if (EVT.keyModifiers & EVT_SCROLLLOCK)
- mods |= 0x10;
- if (EVT.keyModifiers & EVT_NUMLOCK)
- mods |= 0x20;
- if (EVT.keyModifiers & EVT_CAPSLOCK)
- mods |= 0x40;
- PM_setByte(_EVT_biosPtr+0x17,mods);
-
- /* Flag that we are no longer installed */
- _EVT_installed = false;
- }
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVTAPI EVT_exit(void)
-{
- EVT_suspend();
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/smx/oshdr.h
deleted file mode 100644
index 3ff8daa2a9..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/oshdr.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit SMX embedded systems development.
-*
-* Description: Include file to include all OS specific header files.
-*
-****************************************************************************/
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/pm.c b/board/MAI/bios_emulator/scitech/src/pm/smx/pm.c
deleted file mode 100644
index 99ee3d4be4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/pm.c
+++ /dev/null
@@ -1,1187 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32 bit SMX embedded systems development.
-*
-* Description: Implementation for the OS Portability Manager Library, which
-* contains functions to implement OS specific services in a
-* generic, cross platform API. Porting the OS Portability
-* Manager library is the first step to porting any SciTech
-* products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "ztimerc.h"
-#include "event.h"
-#include "mtrr.h"
-#include "pm_help.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <dos.h>
-#include <conio.h>
-#ifdef __GNUC__
-#include <unistd.h>
-#include <sys/nearptr.h>
-#include <sys/stat.h>
-#else
-#include <direct.h>
-#endif
-#ifdef __BORLANDC__
-#pragma warn -par
-#endif
-
-/*--------------------------- Global variables ----------------------------*/
-
-typedef struct {
- int oldMode;
- int old50Lines;
- } DOS_stateBuf;
-
-#define MAX_RM_BLOCKS 10
-
-static struct {
- void *p;
- uint tag;
- } rmBlocks[MAX_RM_BLOCKS];
-
-static uint VESABuf_len = 1024; /* Length of the VESABuf buffer */
-static void *VESABuf_ptr = NULL; /* Near pointer to VESABuf */
-static uint VESABuf_rseg; /* Real mode segment of VESABuf */
-static uint VESABuf_roff; /* Real mode offset of VESABuf */
-static void (PMAPIP fatalErrorCleanup)(void) = NULL;
-ushort _VARAPI _PM_savedDS = 0;
-static ulong PDB = 0,*pPDB = NULL;
-static uint VXD_version = -1;
-
-/*----------------------------- Implementation ----------------------------*/
-
-ulong _ASMAPI _PM_getPDB(void);
-void _ASMAPI _PM_VxDCall(VXD_regs *regs,uint off,uint sel);
-
-/****************************************************************************
-REMARKS:
-External function to call the PMHELP helper VxD.
-****************************************************************************/
-void PMAPI PM_VxDCall(
- VXD_regs *regs)
-{
-}
-
-/****************************************************************************
-RETURNS:
-BCD coded version number of the VxD, or 0 if not loaded (ie: 0x202 - 2.2)
-
-REMARKS:
-This function gets the version number for the VxD that we have connected to.
-****************************************************************************/
-uint PMAPI PMHELP_getVersion(void)
-{
- return VXD_version = 0;
-}
-
-void PMAPI PM_init(void)
-{
-#ifndef REALMODE
- MTRR_init();
-#endif
-}
-
-/****************************************************************************
-PARAMETERS:
-base - The starting physical base address of the region
-size - The size in bytes of the region
-type - Type to place into the MTRR register
-
-RETURNS:
-Error code describing the result.
-
-REMARKS:
-Function to enable write combining for the specified region of memory.
-****************************************************************************/
-int PMAPI PM_enableWriteCombine(
- ulong base,
- ulong size,
- uint type)
-{
-#ifndef REALMODE
- return MTRR_enableWriteCombine(base,size,type);
-#else
- return PM_MTRR_NOT_SUPPORTED;
-#endif
-}
-
-ibool PMAPI PM_haveBIOSAccess(void)
-{ return false; }
-
-long PMAPI PM_getOSType(void)
-{ return _OS_SMX; }
-
-int PMAPI PM_getModeType(void)
-{ return PM_386; }
-
-void PMAPI PM_backslash(char *s)
-{
- uint pos = strlen(s);
- if (s[pos-1] != '\\') {
- s[pos] = '\\';
- s[pos+1] = '\0';
- }
-}
-
-void PMAPI PM_setFatalErrorCleanup(
- void (PMAPIP cleanup)(void))
-{
- fatalErrorCleanup = cleanup;
-}
-
-void MGLOutput(char *);
-
-void PMAPI PM_fatalError(const char *msg)
-{
- if (fatalErrorCleanup)
- fatalErrorCleanup();
- MGLOutput(msg);
-/* No support for fprintf() under smx currently! */
-/* fprintf(stderr,"%s\n", msg); */
- exit(1);
-}
-
-static void ExitVBEBuf(void)
-{
- if (VESABuf_ptr)
- PM_freeRealSeg(VESABuf_ptr);
- VESABuf_ptr = 0;
-}
-
-void * PMAPI PM_getVESABuf(uint *len,uint *rseg,uint *roff)
-{
- if (!VESABuf_ptr) {
- /* Allocate a global buffer for communicating with the VESA VBE */
- if ((VESABuf_ptr = PM_allocRealSeg(VESABuf_len, &VESABuf_rseg, &VESABuf_roff)) == NULL)
- return NULL;
- atexit(ExitVBEBuf);
- }
- *len = VESABuf_len;
- *rseg = VESABuf_rseg;
- *roff = VESABuf_roff;
- return VESABuf_ptr;
-}
-
-int PMAPI PM_int386(int intno, PMREGS *in, PMREGS *out)
-{
- PMSREGS sregs;
- PM_segread(&sregs);
- return PM_int386x(intno,in,out,&sregs);
-}
-
-/* Routines to set and get the real mode interrupt vectors, by making
- * direct real mode calls to DOS and bypassing the DOS extenders API.
- * This is the safest way to handle this, as some servers try to be
- * smart about changing real mode vectors.
- */
-
-void PMAPI _PM_getRMvect(int intno, long *realisr)
-{
- RMREGS regs;
- RMSREGS sregs;
-
- PM_saveDS();
- regs.h.ah = 0x35;
- regs.h.al = intno;
- PM_int86x(0x21, &regs, &regs, &sregs);
- *realisr = ((long)sregs.es << 16) | regs.x.bx;
-}
-
-void PMAPI _PM_setRMvect(int intno, long realisr)
-{
- RMREGS regs;
- RMSREGS sregs;
-
- PM_saveDS();
- regs.h.ah = 0x25;
- regs.h.al = intno;
- sregs.ds = (int)(realisr >> 16);
- regs.x.dx = (int)(realisr & 0xFFFF);
- PM_int86x(0x21, &regs, &regs, &sregs);
-}
-
-void PMAPI _PM_addRealModeBlock(void *mem,uint tag)
-{
- int i;
-
- for (i = 0; i < MAX_RM_BLOCKS; i++) {
- if (rmBlocks[i].p == NULL) {
- rmBlocks[i].p = mem;
- rmBlocks[i].tag = tag;
- return;
- }
- }
- PM_fatalError("To many real mode memory block allocations!");
-}
-
-uint PMAPI _PM_findRealModeBlock(void *mem)
-{
- int i;
-
- for (i = 0; i < MAX_RM_BLOCKS; i++) {
- if (rmBlocks[i].p == mem)
- return rmBlocks[i].tag;
- }
- PM_fatalError("Could not find prior real mode memory block allocation!");
- return 0;
-}
-
-char * PMAPI PM_getCurrentPath(
- char *path,
- int maxLen)
-{
- return getcwd(path,maxLen);
-}
-
-char PMAPI PM_getBootDrive(void)
-{ return 'C'; }
-
-const char * PMAPI PM_getVBEAFPath(void)
-{ return "c:\\"; }
-
-const char * PMAPI PM_getNucleusPath(void)
-{
- static char path[256];
- char *env;
-
- if ((env = getenv("NUCLEUS_PATH")) != NULL)
- return env;
- return "c:\\nucleus";
-}
-
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
- static char path[256];
- strcpy(path,PM_getNucleusPath());
- PM_backslash(path);
- strcat(path,"config");
- return path;
-}
-
-const char * PMAPI PM_getUniqueID(void)
-{ return "SMX"; }
-
-const char * PMAPI PM_getMachineName(void)
-{ return "SMX"; }
-
-int PMAPI PM_kbhit(void)
-{
- int hit;
- event_t evt;
-
- hit = EVT_peekNext(&evt,EVT_KEYDOWN | EVT_KEYREPEAT);
- EVT_flush(~(EVT_KEYDOWN | EVT_KEYREPEAT));
- return hit;
-}
-
-int PMAPI PM_getch(void)
-{
- event_t evt;
-
- EVT_halt(&evt,EVT_KEYDOWN);
- return EVT_asciiCode(evt.message);
-}
-
-PM_HWND PMAPI PM_openConsole(PM_HWND hwndUser,int device,int xRes,int yRes,int bpp,ibool fullScreen)
-{
- /* Not used for SMX */
- (void)hwndUser;
- (void)device;
- (void)xRes;
- (void)yRes;
- (void)bpp;
- (void)fullScreen;
- return 0;
-}
-
-int PMAPI PM_getConsoleStateSize(void)
-{
- return sizeof(DOS_stateBuf);
-}
-
-void PMAPI PM_saveConsoleState(void *stateBuf,PM_HWND hwndConsole)
-{
- RMREGS regs;
- DOS_stateBuf *sb = stateBuf;
-
- /* Save the old video mode state */
- regs.h.ah = 0x0F;
- PM_int86(0x10,&regs,&regs);
- sb->oldMode = regs.h.al & 0x7F;
- sb->old50Lines = false;
- if (sb->oldMode == 0x3) {
- regs.x.ax = 0x1130;
- regs.x.bx = 0;
- regs.x.dx = 0;
- PM_int86(0x10,&regs,&regs);
- sb->old50Lines = (regs.h.dl == 42 || regs.h.dl == 49);
- }
- (void)hwndConsole;
-}
-
-void PMAPI PM_setSuspendAppCallback(int (_ASMAPIP saveState)(int flags))
-{
- /* Not used for SMX */
- (void)saveState;
-}
-
-void PMAPI PM_restoreConsoleState(const void *stateBuf,PM_HWND hwndConsole)
-{
- RMREGS regs;
- const DOS_stateBuf *sb = stateBuf;
-
- /* Retore 50 line mode if set */
- if (sb->old50Lines) {
- regs.x.ax = 0x1112;
- regs.x.bx = 0;
- PM_int86(0x10,&regs,&regs);
- }
- (void)hwndConsole;
-}
-
-void PMAPI PM_closeConsole(PM_HWND hwndConsole)
-{
- /* Not used for SMX */
- (void)hwndConsole;
-}
-
-void PMAPI PM_setOSCursorLocation(int x,int y)
-{
- uchar *_biosPtr = PM_getBIOSPointer();
- PM_setByte(_biosPtr+0x50,x);
- PM_setByte(_biosPtr+0x51,y);
-}
-
-void PMAPI PM_setOSScreenWidth(int width,int height)
-{
- uchar *_biosPtr = PM_getBIOSPointer();
- PM_setWord(_biosPtr+0x4A,width);
- PM_setWord(_biosPtr+0x4C,width*2);
- PM_setByte(_biosPtr+0x84,height-1);
- if (height > 25) {
- PM_setWord(_biosPtr+0x60,0x0607);
- PM_setByte(_biosPtr+0x85,0x08);
- }
- else {
- PM_setWord(_biosPtr+0x60,0x0D0E);
- PM_setByte(_biosPtr+0x85,0x016);
- }
-}
-
-void * PMAPI PM_mallocShared(long size)
-{
- return PM_malloc(size);
-}
-
-void PMAPI PM_freeShared(void *ptr)
-{
- PM_free(ptr);
-}
-
-#define GetRMVect(intno,isr) *(isr) = ((ulong*)rmZeroPtr)[intno]
-#define SetRMVect(intno,isr) ((ulong*)rmZeroPtr)[intno] = (isr)
-
-ibool PMAPI PM_doBIOSPOST(
- ushort axVal,
- ulong BIOSPhysAddr,
- void *mappedBIOS,
- ulong BIOSLen)
-{
- static int firstTime = true;
- static uchar *rmZeroPtr;
- long Current10,Current6D,Current42;
- RMREGS regs;
- RMSREGS sregs;
-
- /* Create a zero memory mapping for us to use */
- if (firstTime) {
- rmZeroPtr = PM_mapPhysicalAddr(0,0x7FFF,true);
- firstTime = false;
- }
-
- /* Remap the secondary BIOS to 0xC0000 physical */
- if (BIOSPhysAddr != 0xC0000L || BIOSLen > 32768) {
- /* SMX cannot virtually remap the BIOS, so we can only work if all
- * the secondary controllers are identical, and we then use the
- * BIOS on the first controller for all the remaining controllers.
- *
- * For OS'es that do virtual memory, and remapping of 0xC0000
- * physical (perhaps a copy on write mapping) should be all that
- * is needed.
- */
- return false;
- }
-
- /* Save current handlers of int 10h and 6Dh */
- GetRMVect(0x10,&Current10);
- GetRMVect(0x6D,&Current6D);
-
- /* POST the secondary BIOS */
- GetRMVect(0x42,&Current42);
- SetRMVect(0x10,Current42); /* Restore int 10h to STD-BIOS */
- regs.x.ax = axVal;
- PM_callRealMode(0xC000,0x0003,&regs,&sregs);
-
- /* Restore current handlers */
- SetRMVect(0x10,Current10);
- SetRMVect(0x6D,Current6D);
-
- /* Second the primary BIOS mappin 1:1 for 0xC0000 physical */
- if (BIOSPhysAddr != 0xC0000L) {
- /* SMX does not support this */
- (void)mappedBIOS;
- }
- return true;
-}
-
-void PMAPI PM_sleep(ulong milliseconds)
-{
- ulong microseconds = milliseconds * 1000L;
- LZTimerObject tm;
-
- LZTimerOnExt(&tm);
- while (LZTimerLapExt(&tm) < microseconds)
- ;
- LZTimerOffExt(&tm);
-}
-
-int PMAPI PM_getCOMPort(int port)
-{
- switch (port) {
- case 0: return 0x3F8;
- case 1: return 0x2F8;
- }
- return 0;
-}
-
-int PMAPI PM_getLPTPort(int port)
-{
- switch (port) {
- case 0: return 0x3BC;
- case 1: return 0x378;
- case 2: return 0x278;
- }
- return 0;
-}
-
-PM_MODULE PMAPI PM_loadLibrary(
- const char *szDLLName)
-{
- (void)szDLLName;
- return NULL;
-}
-
-void * PMAPI PM_getProcAddress(
- PM_MODULE hModule,
- const char *szProcName)
-{
- (void)hModule;
- (void)szProcName;
- return NULL;
-}
-
-void PMAPI PM_freeLibrary(
- PM_MODULE hModule)
-{
- (void)hModule;
-}
-
-int PMAPI PM_setIOPL(
- int level)
-{
- return level;
-}
-
-/****************************************************************************
-REMARKS:
-Internal function to convert the find data to the generic interface.
-****************************************************************************/
-static void convertFindData(
- PM_findData *findData,
- struct find_t *blk)
-{
- ulong dwSize = findData->dwSize;
-
- memset(findData,0,findData->dwSize);
- findData->dwSize = dwSize;
- if (blk->attrib & _A_RDONLY)
- findData->attrib |= PM_FILE_READONLY;
- if (blk->attrib & _A_SUBDIR)
- findData->attrib |= PM_FILE_DIRECTORY;
- if (blk->attrib & _A_ARCH)
- findData->attrib |= PM_FILE_ARCHIVE;
- if (blk->attrib & _A_HIDDEN)
- findData->attrib |= PM_FILE_HIDDEN;
- if (blk->attrib & _A_SYSTEM)
- findData->attrib |= PM_FILE_SYSTEM;
- findData->sizeLo = blk->size;
- strncpy(findData->name,blk->name,PM_MAX_PATH);
- findData->name[PM_MAX_PATH-1] = 0;
-}
-
-#define FIND_MASK (_A_RDONLY | _A_ARCH | _A_SUBDIR | _A_HIDDEN | _A_SYSTEM)
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-void * PMAPI PM_findFirstFile(
- const char *filename,
- PM_findData *findData)
-{
- struct find_t *blk;
-
- if ((blk = PM_malloc(sizeof(*blk))) == NULL)
- return PM_FILE_INVALID;
- if (_dos_findfirst((char*)filename,FIND_MASK,blk) == 0) {
- convertFindData(findData,blk);
- return blk;
- }
- return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
- void *handle,
- PM_findData *findData)
-{
- struct find_t *blk = handle;
-
- if (_dos_findnext(blk) == 0) {
- convertFindData(findData,blk);
- return true;
- }
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
- void *handle)
-{
- PM_free(handle);
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
- 1 - Drive A:
- 2 - Drive B:
- 3 - Drive C:
- etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
- char drive)
-{
- RMREGS regs;
- regs.h.dl = (uchar)(drive - 'A' + 1);
- regs.h.ah = 0x36; /* Get disk information service */
- PM_int86(0x21,&regs,&regs);
- return regs.x.ax != 0xFFFF; /* AX = 0xFFFF if disk is invalid */
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
- int drive,
- char *dir,
- int len)
-{
- uint oldDrive,maxDrives;
- _dos_getdrive(&oldDrive);
- _dos_setdrive(drive,&maxDrives);
- getcwd(dir,len);
- _dos_setdrive(oldDrive,&maxDrives);
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
- const char *filename,
- uint attrib)
-{
-#if defined(TNT) && defined(_MSC_VER)
- DWORD attr = 0;
-
- if (attrib & PM_FILE_READONLY)
- attr |= FILE_ATTRIBUTE_READONLY;
- if (attrib & PM_FILE_ARCHIVE)
- attr |= FILE_ATTRIBUTE_ARCHIVE;
- if (attrib & PM_FILE_HIDDEN)
- attr |= FILE_ATTRIBUTE_HIDDEN;
- if (attrib & PM_FILE_SYSTEM)
- attr |= FILE_ATTRIBUTE_SYSTEM;
- SetFileAttributes((LPSTR)filename, attr);
-#else
- uint attr = 0;
-
- if (attrib & PM_FILE_READONLY)
- attr |= _A_RDONLY;
- if (attrib & PM_FILE_ARCHIVE)
- attr |= _A_ARCH;
- if (attrib & PM_FILE_HIDDEN)
- attr |= _A_HIDDEN;
- if (attrib & PM_FILE_SYSTEM)
- attr |= _A_SYSTEM;
- _dos_setfileattr(filename,attr);
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Function to create a directory.
-****************************************************************************/
-ibool PMAPI PM_mkdir(
- const char *filename)
-{
-#ifdef __GNUC__
- return mkdir(filename,S_IRUSR) == 0;
-#else
-/*AM: return mkdir(filename) == 0; */
- return(false);
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Function to remove a directory.
-****************************************************************************/
-ibool PMAPI PM_rmdir(
- const char *filename)
-{
-/*AM: return rmdir(filename) == 0; */
- return(false);
-}
-
-/****************************************************************************
-REMARKS:
-Allocates a block of locked, physically contiguous memory. The memory
-may be required to be below the 16Meg boundary.
-****************************************************************************/
-void * PMAPI PM_allocLockedMem(
- uint size,
- ulong *physAddr,
- ibool contiguous,
- ibool below16M)
-{
- void *p;
- uint r_seg,r_off;
- PM_lockHandle lh;
-
- /* Under DOS the only way to know the physical memory address is to
- * allocate the memory below the 1Meg boundary as real mode memory.
- * We also allocate 4095 bytes more memory than we need, so we can
- * properly page align the start of the memory block for DMA operations.
- */
- if (size > 4096)
- return NULL;
- if ((p = PM_allocRealSeg((size + 0xFFF) & ~0xFFF,&r_seg,&r_off)) == NULL)
- return NULL;
- *physAddr = ((r_seg << 4) + r_off + 0xFFF) & ~0xFFF;
- PM_lockDataPages(p,size*2,&lh);
- return p;
-}
-
-void PMAPI PM_freeLockedMem(void *p,uint size,ibool contiguous)
-{
- (void)size;
- PM_freeRealSeg(p);
-}
-
-/*-------------------------------------------------------------------------*/
-/* Generic DPMI routines common to 16/32 bit code */
-/*-------------------------------------------------------------------------*/
-
-ulong PMAPI DPMI_mapPhysicalToLinear(ulong physAddr,ulong limit)
-{
- PMREGS r;
- ulong physOfs;
-
- if (physAddr < 0x100000L) {
- /* We can't map memory below 1Mb, but the linear address are already
- * mapped 1:1 for this memory anyway so we just return the base address.
- */
- return physAddr;
- }
-
- /* Round the physical address to a 4Kb boundary and the limit to a
- * 4Kb-1 boundary before passing the values to DPMI as some extenders
- * will fail the calls unless this is the case. If we round the
- * physical address, then we also add an extra offset into the address
- * that we return.
- */
- physOfs = physAddr & 4095;
- physAddr = physAddr & ~4095;
- limit = ((limit+physOfs+1+4095) & ~4095)-1;
-
- r.x.ax = 0x800; /* DPMI map physical to linear */
- r.x.bx = physAddr >> 16;
- r.x.cx = physAddr & 0xFFFF;
- r.x.si = limit >> 16;
- r.x.di = limit & 0xFFFF;
- PM_int386(0x31, &r, &r);
- if (r.x.cflag)
- return 0xFFFFFFFFUL;
- return ((ulong)r.x.bx << 16) + r.x.cx + physOfs;
-}
-
-int PMAPI DPMI_setSelectorBase(ushort sel,ulong linAddr)
-{
- PMREGS r;
-
- r.x.ax = 7; /* DPMI set selector base address */
- r.x.bx = sel;
- r.x.cx = linAddr >> 16;
- r.x.dx = linAddr & 0xFFFF;
- PM_int386(0x31, &r, &r);
- if (r.x.cflag)
- return 0;
- return 1;
-}
-
-ulong PMAPI DPMI_getSelectorBase(ushort sel)
-{
- PMREGS r;
-
- r.x.ax = 6; /* DPMI get selector base address */
- r.x.bx = sel;
- PM_int386(0x31, &r, &r);
- return ((ulong)r.x.cx << 16) + r.x.dx;
-}
-
-int PMAPI DPMI_setSelectorLimit(ushort sel,ulong limit)
-{
- PMREGS r;
-
- r.x.ax = 8; /* DPMI set selector limit */
- r.x.bx = sel;
- r.x.cx = limit >> 16;
- r.x.dx = limit & 0xFFFF;
- PM_int386(0x31, &r, &r);
- if (r.x.cflag)
- return 0;
- return 1;
-}
-
-uint PMAPI DPMI_createSelector(ulong base,ulong limit)
-{
- uint sel;
- PMREGS r;
-
- /* Allocate 1 descriptor */
- r.x.ax = 0;
- r.x.cx = 1;
- PM_int386(0x31, &r, &r);
- if (r.x.cflag) return 0;
- sel = r.x.ax;
-
- /* Set the descriptor access rights (for a 32 bit page granular
- * segment, ring 0).
- */
- r.x.ax = 9;
- r.x.bx = sel;
- r.x.cx = 0x4093;
- PM_int386(0x31, &r, &r);
-
- /* Map physical memory and create selector */
- if ((base = DPMI_mapPhysicalToLinear(base,limit)) == 0xFFFFFFFFUL)
- return 0;
- if (!DPMI_setSelectorBase(sel,base))
- return 0;
- if (!DPMI_setSelectorLimit(sel,limit))
- return 0;
- return sel;
-}
-
-void PMAPI DPMI_freeSelector(uint sel)
-{
- PMREGS r;
-
- r.x.ax = 1;
- r.x.bx = sel;
- PM_int386(0x31, &r, &r);
-}
-
-int PMAPI DPMI_lockLinearPages(ulong linear,ulong len)
-{
- PMREGS r;
-
- r.x.ax = 0x600; /* DPMI Lock Linear Region */
- r.x.bx = (linear >> 16); /* Linear address in BX:CX */
- r.x.cx = (linear & 0xFFFF);
- r.x.si = (len >> 16); /* Length in SI:DI */
- r.x.di = (len & 0xFFFF);
- PM_int386(0x31, &r, &r);
- return (!r.x.cflag);
-}
-
-int PMAPI DPMI_unlockLinearPages(ulong linear,ulong len)
-{
- PMREGS r;
-
- r.x.ax = 0x601; /* DPMI Unlock Linear Region */
- r.x.bx = (linear >> 16); /* Linear address in BX:CX */
- r.x.cx = (linear & 0xFFFF);
- r.x.si = (len >> 16); /* Length in SI:DI */
- r.x.di = (len & 0xFFFF);
- PM_int386(0x31, &r, &r);
- return (!r.x.cflag);
-}
-
-void * PMAPI DPMI_mapPhysicalAddr(ulong base,ulong limit,ibool isCached)
-{
- PMSREGS sregs;
- ulong linAddr;
- ulong DSBaseAddr;
-
- /* Get the base address for the default DS selector */
- PM_segread(&sregs);
- DSBaseAddr = DPMI_getSelectorBase(sregs.ds);
- if ((base < 0x100000) && (DSBaseAddr == 0)) {
- /* DS is zero based, so we can directly access the first 1Mb of
- * system memory (like under DOS4GW).
- */
- return (void*)base;
- }
-
- /* Map the memory to a linear address using DPMI function 0x800 */
- if ((linAddr = DPMI_mapPhysicalToLinear(base,limit)) == 0) {
- if (base >= 0x100000)
- return NULL;
- /* If the linear address mapping fails but we are trying to
- * map an area in the first 1Mb of system memory, then we must
- * be running under a Windows or OS/2 DOS box. Under these
- * environments we can use the segment wrap around as a fallback
- * measure, as this does work properly.
- */
- linAddr = base;
- }
-
- /* Now expand the default DS selector to 4Gb so we can access it */
- if (!DPMI_setSelectorLimit(sregs.ds,0xFFFFFFFFUL))
- return NULL;
-
- /* Finally enable caching for the page tables that we just mapped in,
- * since DOS4GW and PMODE/W create the page table entries without
- * caching enabled which hurts the performance of the linear framebuffer
- * as it disables write combining on Pentium Pro and above processors.
- *
- * For those processors cache disabling is better handled through the
- * MTRR registers anyway (we can write combine a region but disable
- * caching) so that MMIO register regions do not screw up.
- */
- if (isCached) {
- if ((PDB = _PM_getPDB()) != 0 && DSBaseAddr == 0) {
- int startPDB,endPDB,iPDB,startPage,endPage,start,end,iPage;
- ulong pageTable,*pPageTable;
- if (!pPDB) {
- if (PDB >= 0x100000)
- pPDB = (ulong*)DPMI_mapPhysicalToLinear(PDB,0xFFF);
- else
- pPDB = (ulong*)PDB;
- }
- if (pPDB) {
- startPDB = (linAddr >> 22) & 0x3FF;
- startPage = (linAddr >> 12) & 0x3FF;
- endPDB = ((linAddr+limit) >> 22) & 0x3FF;
- endPage = ((linAddr+limit) >> 12) & 0x3FF;
- for (iPDB = startPDB; iPDB <= endPDB; iPDB++) {
- pageTable = pPDB[iPDB] & ~0xFFF;
- if (pageTable >= 0x100000)
- pPageTable = (ulong*)DPMI_mapPhysicalToLinear(pageTable,0xFFF);
- else
- pPageTable = (ulong*)pageTable;
- start = (iPDB == startPDB) ? startPage : 0;
- end = (iPDB == endPDB) ? endPage : 0x3FF;
- for (iPage = start; iPage <= end; iPage++)
- pPageTable[iPage] &= ~0x18;
- }
- }
- }
- }
-
- /* Now return the base address of the memory into the default DS */
- return (void*)(linAddr - DSBaseAddr);
-}
-
-/* Some DOS extender implementations do not directly support calling a
- * real mode procedure from protected mode. However we can simulate what
- * we need temporarily hooking the INT 6Ah vector with a small real mode
- * stub that will call our real mode code for us.
- */
-
-static uchar int6AHandler[] = {
- 0x00,0x00,0x00,0x00, /* __PMODE_callReal variable */
- 0xFB, /* sti */
- 0x2E,0xFF,0x1E,0x00,0x00, /* call [cs:__PMODE_callReal] */
- 0xCF, /* iretf */
- };
-static uchar *crPtr = NULL; /* Pointer to of int 6A handler */
-static uint crRSeg,crROff; /* Real mode seg:offset of handler */
-
-void PMAPI PM_callRealMode(uint seg,uint off, RMREGS *in,
- RMSREGS *sregs)
-{
- uchar *p;
- uint oldSeg,oldOff;
-
- if (!crPtr) {
- /* Allocate and copy the memory block only once */
- crPtr = PM_allocRealSeg(sizeof(int6AHandler), &crRSeg, &crROff);
- memcpy(crPtr,int6AHandler,sizeof(int6AHandler));
- }
- PM_setWord(crPtr,off); /* Plug in address to call */
- PM_setWord(crPtr+2,seg);
- p = PM_mapRealPointer(0,0x6A * 4);
- oldOff = PM_getWord(p); /* Save old handler address */
- oldSeg = PM_getWord(p+2);
- PM_setWord(p,crROff+4); /* Hook 6A handler */
- PM_setWord(p+2,crRSeg);
- PM_int86x(0x6A, in, in, sregs); /* Call real mode code */
- PM_setWord(p,oldOff); /* Restore old handler */
- PM_setWord(p+2,oldSeg);
-}
-
-void * PMAPI PM_getBIOSPointer(void)
-{ return PM_mapPhysicalAddr(0x400,0xFFFF,true); }
-
-void * PMAPI PM_getA0000Pointer(void)
-{ return PM_mapPhysicalAddr(0xA0000,0xFFFF,true); }
-
-void * PMAPI PM_mapPhysicalAddr(ulong base,ulong limit,ibool isCached)
-{ return DPMI_mapPhysicalAddr(base,limit,isCached); }
-
-void PMAPI PM_freePhysicalAddr(void *ptr,ulong limit)
-{
- /* Mapping cannot be free */
-}
-
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{
- /* TODO: This function should find the physical address of a linear */
- /* address. */
- (void)p;
- return 0xFFFFFFFFUL;
-}
-
-void * PMAPI PM_mapToProcess(void *base,ulong limit)
-{
- (void)limit;
- return (void*)base;
-}
-
-void * PMAPI PM_mapRealPointer(uint r_seg,uint r_off)
-{
- static uchar *zeroPtr = NULL;
-
- if (!zeroPtr)
- zeroPtr = PM_mapPhysicalAddr(0,0xFFFFF,true);
- return (void*)(zeroPtr + MK_PHYS(r_seg,r_off));
-}
-
-void * PMAPI PM_allocRealSeg(uint size,uint *r_seg,uint *r_off)
-{
- PMREGS r;
- void *p;
-
- r.x.ax = 0x100; /* DPMI allocate DOS memory */
- r.x.bx = (size + 0xF) >> 4; /* number of paragraphs */
- PM_int386(0x31, &r, &r);
- if (r.x.cflag)
- return NULL; /* DPMI call failed */
- *r_seg = r.x.ax; /* Real mode segment */
- *r_off = 0;
- p = PM_mapRealPointer(*r_seg,*r_off);
- _PM_addRealModeBlock(p,r.x.dx);
- return p;
-}
-
-void PMAPI PM_freeRealSeg(void *mem)
-{
- PMREGS r;
-
- r.x.ax = 0x101; /* DPMI free DOS memory */
- r.x.dx = _PM_findRealModeBlock(mem);/* DX := selector from 0x100 */
- PM_int386(0x31, &r, &r);
-}
-
-static DPMI_handler_t DPMI_int10 = NULL;
-
-void PMAPI DPMI_setInt10Handler(DPMI_handler_t handler)
-{
- DPMI_int10 = handler;
-}
-
-void PMAPI DPMI_int86(int intno, DPMI_regs *regs)
-{
- PMREGS r;
- PMSREGS sr;
-
- if (intno == 0x10 && DPMI_int10) {
- if (DPMI_int10(regs))
- return;
- }
- PM_segread(&sr);
- r.x.ax = 0x300; /* DPMI issue real interrupt */
- r.h.bl = intno;
- r.h.bh = 0;
- r.x.cx = 0;
- sr.es = sr.ds;
- r.e.edi = (uint)regs;
- PM_int386x(0x31, &r, &r, &sr); /* Issue the interrupt */
-}
-
-#define IN(reg) rmregs.reg = in->e.reg
-#define OUT(reg) out->e.reg = rmregs.reg
-
-int PMAPI PM_int86(int intno, RMREGS *in, RMREGS *out)
-{
- DPMI_regs rmregs;
-
- memset(&rmregs, 0, sizeof(rmregs));
- IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
-
-/* These real mode ints may cause crashes. */
-/*AM: DPMI_int86(intno,&rmregs); /###* DPMI issue real interrupt */
-
- OUT(eax); OUT(ebx); OUT(ecx); OUT(edx); OUT(esi); OUT(edi);
- out->x.cflag = rmregs.flags & 0x1;
- return out->x.ax;
-}
-
-int PMAPI PM_int86x(int intno, RMREGS *in, RMREGS *out,
- RMSREGS *sregs)
-{
- DPMI_regs rmregs;
-
- memset(&rmregs, 0, sizeof(rmregs));
- IN(eax); IN(ebx); IN(ecx); IN(edx); IN(esi); IN(edi);
- rmregs.es = sregs->es;
- rmregs.ds = sregs->ds;
-
-/*AM: DPMI_int86(intno,&rmregs); /###* DPMI issue real interrupt */
-
- OUT(eax); OUT(ebx); OUT(ecx); OUT(edx); OUT(esi); OUT(edi);
- sregs->es = rmregs.es;
- sregs->cs = rmregs.cs;
- sregs->ss = rmregs.ss;
- sregs->ds = rmregs.ds;
- out->x.cflag = rmregs.flags & 0x1;
- return out->x.ax;
-}
-
-#pragma pack(1)
-
-typedef struct {
- uint LargestBlockAvail;
- uint MaxUnlockedPage;
- uint LargestLockablePage;
- uint LinAddrSpace;
- uint NumFreePagesAvail;
- uint NumPhysicalPagesFree;
- uint TotalPhysicalPages;
- uint FreeLinAddrSpace;
- uint SizeOfPageFile;
- uint res[3];
- } MemInfo;
-
-#pragma pack()
-
-void PMAPI PM_availableMemory(ulong *physical,ulong *total)
-{
- PMREGS r;
- PMSREGS sr;
- MemInfo memInfo;
-
- PM_segread(&sr);
- r.x.ax = 0x500; /* DPMI get free memory info */
- sr.es = sr.ds;
- r.e.edi = (uint)&memInfo;
- PM_int386x(0x31, &r, &r, &sr); /* Issue the interrupt */
- *physical = memInfo.NumPhysicalPagesFree * 4096;
- *total = memInfo.LargestBlockAvail;
- if (*total < *physical)
- *physical = *total;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file attributes for a specific file.
-****************************************************************************/
-uint PMAPI PM_getFileAttr(
- const char *filename)
-{
- /* TODO: Implement this! */
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_getFileTime(
- const char *filename,
- ibool gmTime,
- PM_time *time)
-{
- /* TODO: Implement this! */
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to set the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_setFileTime(
- const char *filename,
- ibool gmTime,
- PM_time *time)
-{
- /* TODO: Implement this! */
- return false;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/pmsmx.c b/board/MAI/bios_emulator/scitech/src/pm/smx/pmsmx.c
deleted file mode 100644
index 98e31bc638..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/pmsmx.c
+++ /dev/null
@@ -1,471 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit SMX embedded systems development
-*
-* Description: Implementation for the OS Portability Manager Library, which
-* contains functions to implement OS specific services in a
-* generic, cross platform API. Porting the OS Portability
-* Manager library is the first step to porting any SciTech
-* products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <dos.h>
-#include "smx/ps2mouse.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-static int globalDataStart;
-
-PM_criticalHandler _VARAPI _PM_critHandler = NULL;
-PM_breakHandler _VARAPI _PM_breakHandler = NULL;
-PM_intHandler _VARAPI _PM_timerHandler = NULL;
-PM_intHandler _VARAPI _PM_rtcHandler = NULL;
-PM_intHandler _VARAPI _PM_keyHandler = NULL;
-PM_key15Handler _VARAPI _PM_key15Handler = NULL;
-PM_mouseHandler _VARAPI _PM_mouseHandler = NULL;
-PM_intHandler _VARAPI _PM_int10Handler = NULL;
-int _VARAPI _PM_mouseMask;
-
-uchar * _VARAPI _PM_ctrlCPtr; /* Location of Ctrl-C flag */
-uchar * _VARAPI _PM_ctrlBPtr; /* Location of Ctrl-Break flag */
-uchar * _VARAPI _PM_critPtr; /* Location of Critical error Bf*/
-PMFARPTR _VARAPI _PM_prevTimer = PMNULL; /* Previous timer handler */
-PMFARPTR _VARAPI _PM_prevRTC = PMNULL; /* Previous RTC handler */
-PMFARPTR _VARAPI _PM_prevKey = PMNULL; /* Previous key handler */
-PMFARPTR _VARAPI _PM_prevKey15 = PMNULL; /* Previous key15 handler */
-PMFARPTR _VARAPI _PM_prevBreak = PMNULL; /* Previous break handler */
-PMFARPTR _VARAPI _PM_prevCtrlC = PMNULL; /* Previous CtrlC handler */
-PMFARPTR _VARAPI _PM_prevCritical = PMNULL; /* Previous critical handler */
-long _VARAPI _PM_prevRealTimer; /* Previous real mode timer */
-long _VARAPI _PM_prevRealRTC; /* Previous real mode RTC */
-long _VARAPI _PM_prevRealKey; /* Previous real mode key */
-long _VARAPI _PM_prevRealKey15; /* Previous real mode key15 */
-long _VARAPI _PM_prevRealInt10; /* Previous real mode int 10h */
-static uchar _PM_oldCMOSRegA; /* CMOS register A contents */
-static uchar _PM_oldCMOSRegB; /* CMOS register B contents */
-static uchar _PM_oldRTCPIC2; /* Mask value for RTC IRQ8 */
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* Globals for locking interrupt handlers in _pmsmx.asm */
-
-extern int _ASMAPI _PM_pmsmxDataStart;
-extern int _ASMAPI _PM_pmsmxDataEnd;
-void _ASMAPI _PM_pmsmxCodeStart(void);
-void _ASMAPI _PM_pmsmxCodeEnd(void);
-
-/* Protected mode interrupt handlers, also called by PM callbacks below */
-
-void _ASMAPI _PM_timerISR(void);
-void _ASMAPI _PM_rtcISR(void);
-void _ASMAPI _PM_keyISR(void);
-void _ASMAPI _PM_key15ISR(void);
-void _ASMAPI _PM_breakISR(void);
-void _ASMAPI _PM_ctrlCISR(void);
-void _ASMAPI _PM_criticalISR(void);
-void _ASMAPI _PM_mouseISR(void);
-void _ASMAPI _PM_int10PMCB(void);
-
-/* Protected mode DPMI callback handlers */
-
-void _ASMAPI _PM_mousePMCB(void);
-
-/* Routine to install a mouse handler function */
-
-void _ASMAPI _PM_setMouseHandler(int mask);
-
-/* Routine to allocate DPMI real mode callback routines */
-
-void _ASMAPI _DPMI_allocateCallback(void (_ASMAPI *pmcode)(),void *rmregs,long *RMCB);
-void _ASMAPI _DPMI_freeCallback(long RMCB);
-
-/* DPMI helper functions in PMLITE.C */
-
-ulong PMAPI DPMI_mapPhysicalToLinear(ulong physAddr,ulong limit);
-int PMAPI DPMI_setSelectorBase(ushort sel,ulong linAddr);
-ulong PMAPI DPMI_getSelectorBase(ushort sel);
-int PMAPI DPMI_setSelectorLimit(ushort sel,ulong limit);
-uint PMAPI DPMI_createSelector(ulong base,ulong limit);
-void PMAPI DPMI_freeSelector(uint sel);
-int PMAPI DPMI_lockLinearPages(ulong linear,ulong len);
-int PMAPI DPMI_unlockLinearPages(ulong linear,ulong len);
-
-/* Functions to read and write CMOS registers */
-
-uchar PMAPI _PM_readCMOS(int index);
-void PMAPI _PM_writeCMOS(int index,uchar value);
-
-/*-------------------------------------------------------------------------*/
-/* Generic routines common to all environments */
-/*-------------------------------------------------------------------------*/
-
-void PMAPI PM_resetMouseDriver(int hardReset)
-{
- ps2MouseReset();
-}
-
-void PMAPI PM_setRealTimeClockFrequency(int frequency)
-{
- static short convert[] = {
- 8192,
- 4096,
- 2048,
- 1024,
- 512,
- 256,
- 128,
- 64,
- 32,
- 16,
- 8,
- 4,
- 2,
- -1,
- };
- int i;
-
- /* First clear any pending RTC timeout if not cleared */
- _PM_readCMOS(0x0C);
- if (frequency == 0) {
- /* Disable RTC timout */
- _PM_writeCMOS(0x0A,_PM_oldCMOSRegA);
- _PM_writeCMOS(0x0B,_PM_oldCMOSRegB & 0x0F);
- }
- else {
- /* Convert frequency value to RTC clock indexes */
- for (i = 0; convert[i] != -1; i++) {
- if (convert[i] == frequency)
- break;
- }
-
- /* Set RTC timout value and enable timeout */
- _PM_writeCMOS(0x0A,(_PM_oldCMOSRegA & 0xF0) | (i+3));
- _PM_writeCMOS(0x0B,(_PM_oldCMOSRegB & 0x0F) | 0x40);
- }
-}
-
-static void PMAPI lockPMHandlers(void)
-{
- static int locked = 0;
- int stat = 0;
- PM_lockHandle lh;
-
- /* Lock all of the code and data used by our protected mode interrupt
- * handling routines, so that it will continue to work correctly
- * under real mode.
- */
- if (!locked) {
- PM_saveDS();
- stat = !PM_lockDataPages(&globalDataStart-2048,4096,&lh);
- stat |= !PM_lockDataPages(&_PM_pmsmxDataStart,(int)&_PM_pmsmxDataEnd - (int)&_PM_pmsmxDataStart,&lh);
- stat |= !PM_lockCodePages((__codePtr)_PM_pmsmxCodeStart,(int)_PM_pmsmxCodeEnd-(int)_PM_pmsmxCodeStart,&lh);
- if (stat) {
- printf("Page locking services failed - interrupt handling not safe!\n");
- exit(1);
- }
- locked = 1;
- }
-}
-
-void PMAPI PM_getPMvect(int intno, PMFARPTR *isr)
-{
- PMREGS regs;
-
- regs.x.ax = 0x204;
- regs.h.bl = intno;
- PM_int386(0x31,&regs,&regs);
- isr->sel = regs.x.cx;
- isr->off = regs.e.edx;
-}
-
-void PMAPI PM_setPMvect(int intno, PM_intHandler isr)
-{
- PMSREGS sregs;
- PMREGS regs;
-
- PM_saveDS();
- regs.x.ax = 0x205; /* Set protected mode vector */
- regs.h.bl = intno;
- PM_segread(&sregs);
- regs.x.cx = sregs.cs;
- regs.e.edx = (uint)isr;
- PM_int386(0x31,&regs,&regs);
-}
-
-void PMAPI PM_restorePMvect(int intno, PMFARPTR isr)
-{
- PMREGS regs;
-
- regs.x.ax = 0x205;
- regs.h.bl = intno;
- regs.x.cx = isr.sel;
- regs.e.edx = isr.off;
- PM_int386(0x31,&regs,&regs);
-}
-
-static long prevRealBreak; /* Previous real mode break handler */
-static long prevRealCtrlC; /* Previous real mode CtrlC handler */
-static long prevRealCritical; /* Prev real mode critical handler */
-
-int PMAPI PM_setMouseHandler(int mask, PM_mouseHandler mh)
-{
- lockPMHandlers(); /* Ensure our handlers are locked */
-
- _PM_mouseHandler = mh;
- return 0;
-}
-
-void PMAPI PM_restoreMouseHandler(void)
-{
- if (_PM_mouseHandler)
- _PM_mouseHandler = NULL;
-}
-
-static void getISR(int intno, PMFARPTR *pmisr, long *realisr)
-{
- PM_getPMvect(intno,pmisr);
-}
-
-static void restoreISR(int intno, PMFARPTR pmisr, long realisr)
-{
- PM_restorePMvect(intno,pmisr);
-}
-
-static void setISR(int intno, void (* PMAPI pmisr)())
-{
- lockPMHandlers(); /* Ensure our handlers are locked */
- PM_setPMvect(intno,pmisr);
-}
-
-void PMAPI PM_setTimerHandler(PM_intHandler th)
-{
- getISR(PM_IRQ0, &_PM_prevTimer, &_PM_prevRealTimer);
- _PM_timerHandler = th;
- setISR(PM_IRQ0, _PM_timerISR);
-}
-
-void PMAPI PM_restoreTimerHandler(void)
-{
- if (_PM_timerHandler) {
- restoreISR(PM_IRQ0, _PM_prevTimer, _PM_prevRealTimer);
- _PM_timerHandler = NULL;
- }
-}
-
-ibool PMAPI PM_setRealTimeClockHandler(PM_intHandler th,int frequency)
-{
- /* Save the old CMOS real time clock values */
- _PM_oldCMOSRegA = _PM_readCMOS(0x0A);
- _PM_oldCMOSRegB = _PM_readCMOS(0x0B);
-
- /* Set the real time clock interrupt handler */
- getISR(0x70, &_PM_prevRTC, &_PM_prevRealRTC);
- _PM_rtcHandler = th;
- setISR(0x70, _PM_rtcISR);
-
- /* Program the real time clock default frequency */
- PM_setRealTimeClockFrequency(frequency);
-
- /* Unmask IRQ8 in the PIC2 */
- _PM_oldRTCPIC2 = PM_inpb(0xA1);
- PM_outpb(0xA1,_PM_oldRTCPIC2 & 0xFE);
- return true;
-}
-
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
- if (_PM_rtcHandler) {
- /* Restore CMOS registers and mask RTC clock */
- _PM_writeCMOS(0x0A,_PM_oldCMOSRegA);
- _PM_writeCMOS(0x0B,_PM_oldCMOSRegB);
- PM_outpb(0xA1,(PM_inpb(0xA1) & 0xFE) | (_PM_oldRTCPIC2 & ~0xFE));
-
- /* Restore the interrupt vector */
- restoreISR(0x70, _PM_prevRTC, _PM_prevRealRTC);
- _PM_rtcHandler = NULL;
- }
-}
-
-void PMAPI PM_setKeyHandler(PM_intHandler kh)
-{
- getISR(PM_IRQ1, &_PM_prevKey, &_PM_prevRealKey);
- _PM_keyHandler = kh;
- setISR(PM_IRQ1, _PM_keyISR);
-}
-
-void PMAPI PM_restoreKeyHandler(void)
-{
- if (_PM_keyHandler) {
- restoreISR(PM_IRQ1, _PM_prevKey, _PM_prevRealKey);
- _PM_keyHandler = NULL;
- }
-}
-
-void PMAPI PM_setKey15Handler(PM_key15Handler kh)
-{
- getISR(0x15, &_PM_prevKey15, &_PM_prevRealKey15);
- _PM_key15Handler = kh;
- setISR(0x15, _PM_key15ISR);
-}
-
-void PMAPI PM_restoreKey15Handler(void)
-{
- if (_PM_key15Handler) {
- restoreISR(0x15, _PM_prevKey15, _PM_prevRealKey15);
- _PM_key15Handler = NULL;
- }
-}
-
-/* Real mode Ctrl-C and Ctrl-Break handler. This handler simply sets a
- * flag in the real mode code segment and exit. We save the location
- * of this flag in real mode memory so that both the real mode and
- * protected mode code will be modifying the same flags.
- */
-
-static uchar ctrlHandler[] = {
- 0x00,0x00,0x00,0x00, /* ctrlBFlag */
- 0x66,0x2E,0xC7,0x06,0x00,0x00,
- 0x01,0x00,0x00,0x00, /* mov [cs:ctrlBFlag],1 */
- 0xCF, /* iretf */
- };
-
-void PMAPI PM_installAltBreakHandler(PM_breakHandler bh)
-{
- uint rseg,roff;
-
- getISR(0x1B, &_PM_prevBreak, &prevRealBreak);
- getISR(0x23, &_PM_prevCtrlC, &prevRealCtrlC);
- _PM_breakHandler = bh;
- setISR(0x1B, _PM_breakISR);
- setISR(0x23, _PM_ctrlCISR);
-
- /* Hook the real mode vectors for these handlers, as these are not
- * normally reflected by the DPMI server up to protected mode
- */
- _PM_ctrlBPtr = PM_allocRealSeg(sizeof(ctrlHandler)*2, &rseg, &roff);
- memcpy(_PM_ctrlBPtr,ctrlHandler,sizeof(ctrlHandler));
- memcpy(_PM_ctrlBPtr+sizeof(ctrlHandler),ctrlHandler,sizeof(ctrlHandler));
- _PM_ctrlCPtr = _PM_ctrlBPtr + sizeof(ctrlHandler);
- _PM_setRMvect(0x1B,((long)rseg << 16) | (roff+4));
- _PM_setRMvect(0x23,((long)rseg << 16) | (roff+sizeof(ctrlHandler)+4));
-}
-
-void PMAPI PM_installBreakHandler(void)
-{
- PM_installAltBreakHandler(NULL);
-}
-
-void PMAPI PM_restoreBreakHandler(void)
-{
- if (_PM_prevBreak.sel) {
- restoreISR(0x1B, _PM_prevBreak, prevRealBreak);
- restoreISR(0x23, _PM_prevCtrlC, prevRealCtrlC);
- _PM_prevBreak.sel = 0;
- _PM_breakHandler = NULL;
- PM_freeRealSeg(_PM_ctrlBPtr);
- }
-}
-
-/* Real mode Critical Error handler. This handler simply saves the AX and
- * DI values in the real mode code segment and exits. We save the location
- * of this flag in real mode memory so that both the real mode and
- * protected mode code will be modifying the same flags.
- */
-
-static uchar criticalHandler[] = {
- 0x00,0x00, /* axCode */
- 0x00,0x00, /* diCode */
- 0x2E,0xA3,0x00,0x00, /* mov [cs:axCode],ax */
- 0x2E,0x89,0x3E,0x02,0x00, /* mov [cs:diCode],di */
- 0xB8,0x03,0x00, /* mov ax,3 */
- 0xCF, /* iretf */
- };
-
-void PMAPI PM_installAltCriticalHandler(PM_criticalHandler ch)
-{
- uint rseg,roff;
-
- getISR(0x24, &_PM_prevCritical, &prevRealCritical);
- _PM_critHandler = ch;
- setISR(0x24, _PM_criticalISR);
-
- /* Hook the real mode vector, as this is not normally reflected by the
- * DPMI server up to protected mode.
- */
- _PM_critPtr = PM_allocRealSeg(sizeof(criticalHandler)*2, &rseg, &roff);
- memcpy(_PM_critPtr,criticalHandler,sizeof(criticalHandler));
- _PM_setRMvect(0x24,((long)rseg << 16) | (roff+4));
-}
-
-void PMAPI PM_installCriticalHandler(void)
-{
- PM_installAltCriticalHandler(NULL);
-}
-
-void PMAPI PM_restoreCriticalHandler(void)
-{
- if (_PM_prevCritical.sel) {
- restoreISR(0x24, _PM_prevCritical, prevRealCritical);
- PM_freeRealSeg(_PM_critPtr);
- _PM_prevCritical.sel = 0;
- _PM_critHandler = NULL;
- }
-}
-
-int PMAPI PM_lockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
- PMSREGS sregs;
- PM_segread(&sregs);
- return DPMI_lockLinearPages((uint)p + DPMI_getSelectorBase(sregs.ds),len);
-}
-
-int PMAPI PM_unlockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
- PMSREGS sregs;
- PM_segread(&sregs);
- return DPMI_unlockLinearPages((uint)p + DPMI_getSelectorBase(sregs.ds),len);
-}
-
-int PMAPI PM_lockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
- PMSREGS sregs;
- PM_segread(&sregs);
-/*AM: causes minor glitch with */
-/*AM: older versions pmEasy which don't allow DPMI 06 on */
-/*AM: Code selector 0x0C -- assume base is 0 which it should be. */
- return DPMI_lockLinearPages((uint)p,len);
-}
-
-int PMAPI PM_unlockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
- PMSREGS sregs;
- PM_segread(&sregs);
- return DPMI_unlockLinearPages((uint)p,len);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/smx/vflat.c
deleted file mode 100644
index 579ef2c95c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/vflat.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-ibool PMAPI VF_available(void)
-{
- return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
- baseAddr = baseAddr;
- bankSize = bankSize;
- codeLen = codeLen;
- bankFunc = bankFunc;
- return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/smx/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/smx/ztimer.c
deleted file mode 100644
index 794119282e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/smx/ztimer.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit SMX embedded systems development
-*
-* Description: OS specific implementation for the Zen Timer functions.
-* LZTimer not supported for smx (as needed for i486 processors), only
-* ULZTimer is supported at this time.
-*
-****************************************************************************/
-
-/*---------------------------- Global smx variables -----------------------*/
-
-extern ulong _cdecl etime; /* elapsed time */
-extern ulong _cdecl xticks_per_second(void);
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* External assembler functions */
-
-void _ASMAPI LZ_disable(void);
-void _ASMAPI LZ_enable(void);
-
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-void __ZTimerInit(void)
-{
-}
-
-ulong reterr(void)
-{
- PM_fatalError("Zen Timer not supported for smx.");
- return(0);
-}
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOn(tm) PM_fatalError("Zen Timer not supported for smx.")
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerLap(tm) reterr()
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOff(tm) PM_fatalError("Zen Timer not supported for smx.")
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerCount(tm) reterr()
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as seconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION (ulong)(1000000/xticks_per_second())
-
-/****************************************************************************
-REMARKS:
-Read the Long Period timer value from the smx timer tick.
-****************************************************************************/
-static ulong __ULZReadTime(void)
-{
- ulong ticks;
- LZ_disable(); /* Turn of interrupts */
- ticks = etime;
- LZ_enable(); /* Turn on interrupts again */
- return ticks;
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{
- if (finish < start)
- finish += xticks_per_second() * 3600 *24; /* Number of ticks in 24 hours */
- return finish - start;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/stub/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/stub/cpuinfo.c
deleted file mode 100644
index 0615e90165..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/stub/cpuinfo.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: *** TODO: ADD YOUR OS ENVIRONMENT NAME HERE ***
-*
-* Description: Module to implement OS specific services to measure the
-* CPU frequency.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Increase the thread priority to maximum, if possible.
-****************************************************************************/
-static int SetMaxThreadPriority(void)
-{
- /* TODO: If you have thread priorities, increase it to maximum for the */
- /* thread for timing the CPU frequency. */
- return oldPriority;
-}
-
-/****************************************************************************
-REMARKS:
-Restore the original thread priority.
-****************************************************************************/
-static void RestoreThreadPriority(
- int priority)
-{
- /* TODO: Restore the original thread priority on exit. */
-}
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
- CPU_largeInteger *freq)
-{
- /* TODO: Return the frequency of the counter in here. You should try to */
- /* normalise this value to be around 100,000 ticks per second. */
- freq->low = 0;
- freq->high = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-
-TODO: Implement this to read the counter. It should be done as a macro
- for accuracy.
-****************************************************************************/
-#define GetCounter(t) \
-{ \
- (t)->low = 0; \
- (t)->high = 0; \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/stub/event.c b/board/MAI/bios_emulator/scitech/src/pm/stub/event.c
deleted file mode 100644
index 204c492540..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/stub/event.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: *** TODO: ADD YOUR OS ENVIRONMENT NAME HERE ***
-*
-* Description: **** implementation for the SciTech cross platform
-* event library.
-*
-****************************************************************************/
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static ushort keyUpMsg[256] = {0};/* Table of key up messages */
-static int rangeX,rangeY; /* Range of mouse coordinates */
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* These are not used under non-DOS systems */
-#define _EVT_disableInt() 1
-#define _EVT_restoreInt(flags)
-
-/****************************************************************************
-PARAMETERS:
-scanCode - Scan code to test
-
-REMARKS:
-This macro determines if a specified key is currently down at the
-time that the call is made.
-****************************************************************************/
-#define _EVT_isKeyDown(scanCode) (keyUpMsg[scanCode] != 0)
-
-/****************************************************************************
-REMARKS:
-This function is used to return the number of ticks since system
-startup in milliseconds. This should be the same value that is placed into
-the time stamp fields of events, and is used to implement auto mouse down
-events.
-****************************************************************************/
-ulong _EVT_getTicks(void)
-{
- /* TODO: Implement this for your OS! */
-}
-
-/****************************************************************************
-REMARKS:
-Pumps all messages in the application message queue into our event queue.
-****************************************************************************/
-static void _EVT_pumpMessages(void)
-{
- /* TODO: The purpose of this function is to read all keyboard and mouse */
- /* events from the OS specific event queue, translate them and post */
- /* them into the SciTech event queue. */
- /* */
- /* NOTE: There are a couple of important things that this function must */
- /* take care of: */
- /* */
- /* 1. Support for KEYDOWN, KEYREPEAT and KEYUP is required. */
- /* */
- /* 2. Support for reading hardware scan code as well as ASCII */
- /* translated values is required. Games use the scan codes rather */
- /* than ASCII values. Scan codes go into the high order byte of the */
- /* keyboard message field. */
- /* */
- /* 3. Support for at least reading mouse motion data (mickeys) from the */
- /* mouse is required. Using the mickey values, we can then translate */
- /* to mouse cursor coordinates scaled to the range of the current */
- /* graphics display mode. Mouse values are scaled based on the */
- /* global 'rangeX' and 'rangeY'. */
- /* */
- /* 4. Support for a timestamp for the events is required, which is */
- /* defined as the number of milliseconds since some event (usually */
- /* system startup). This is the timestamp when the event occurred */
- /* (ie: at interrupt time) not when it was stuff into the SciTech */
- /* event queue. */
- /* */
- /* 5. Support for mouse double click events. If the OS has a native */
- /* mechanism to determine this, it should be used. Otherwise the */
- /* time stamp information will be used by the generic event code */
- /* to generate double click events. */
-}
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-****************************************************************************/
-#define _EVT_maskKeyCode(evt)
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort()
-{
- EVT_exit();
- PM_fatalError("Unhandled exception!");
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
- _EVT_mouseMoveHandler mouseMove)
-{
- /* Initialise the event queue */
- _mouseMove = mouseMove;
- initEventQueue();
- memset(keyUpMsg,0,sizeof(keyUpMsg));
-
- /* TODO: Do any OS specific initialisation here */
-
- /* Catch program termination signals so we can clean up properly */
- signal(SIGABRT, _EVT_abort);
- signal(SIGFPE, _EVT_abort);
- signal(SIGINT, _EVT_abort);
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
- int xRes,
- int yRes)
-{
- rangeX = xRes;
- rangeY = yRes;
-}
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVT_resume(void)
-{
- /* Do nothing for non DOS systems */
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVT_suspend(void)
-{
- /* Do nothing for non DOS systems */
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVT_exit(void)
-{
- /* Restore signal handlers */
- signal(SIGABRT, SIG_DFL);
- signal(SIGFPE, SIG_DFL);
- signal(SIGINT, SIG_DFL);
-
- /* TODO: Do any OS specific cleanup in here */
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/stub/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/stub/oshdr.h
deleted file mode 100644
index 1395cbc3c4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/stub/oshdr.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: BeOS
-*
-* Description: Include file to include all OS specific header files.
-*
-****************************************************************************/
-
-/* TODO: This is where you include OS specific headers for the event handling */
-/* library. You may leave this empty if you have no OS specific headers */
-/* to include. */
diff --git a/board/MAI/bios_emulator/scitech/src/pm/stub/pm.c b/board/MAI/bios_emulator/scitech/src/pm/stub/pm.c
deleted file mode 100644
index 5f278c32df..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/stub/pm.c
+++ /dev/null
@@ -1,980 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: *** TODO: ADD YOUR OS ENVIRONMENT NAME HERE ***
-*
-* Description: Implementation for the OS Portability Manager Library, which
-* contains functions to implement OS specific services in a
-* generic, cross platform API. Porting the OS Portability
-* Manager library is the first step to porting any SciTech
-* products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-/* TODO: Include any OS specific headers here! */
-
-/*--------------------------- Global variables ----------------------------*/
-
-/* TODO: If you support access to the BIOS, the following VESABuf globals */
-/* keep track of a single VESA transfer buffer. If you don't support */
-/* access to the BIOS, remove these variables. */
-
-static uint VESABuf_len = 1024; /* Length of the VESABuf buffer */
-static void *VESABuf_ptr = NULL; /* Near pointer to VESABuf */
-static uint VESABuf_rseg; /* Real mode segment of VESABuf */
-static uint VESABuf_roff; /* Real mode offset of VESABuf */
-
-static void (PMAPIP fatalErrorCleanup)(void) = NULL;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the PM library.
-****************************************************************************/
-void PMAPI PM_init(void)
-{
- /* TODO: Do any initialisation in here. This includes getting IOPL */
- /* access for the process calling PM_init. This will get called */
- /* more than once. */
-
- /* TODO: If you support the supplied MTRR register stuff (you need to */
- /* be at ring 0 for this!), you should initialise it in here. */
-
-/* MTRR_init(); */
-}
-
-/****************************************************************************
-REMARKS:
-Return the operating system type identifier.
-****************************************************************************/
-long PMAPI PM_getOSType(void)
-{
- /* TODO: Change this to return the define for your OS from drvlib/os.h */
- return _OS_MYOS;
-}
-
-/****************************************************************************
-REMARKS:
-Return the runtime type identifier (always PM_386 for protected mode)
-****************************************************************************/
-int PMAPI PM_getModeType(void)
-{ return PM_386; }
-
-/****************************************************************************
-REMARKS:
-Add a file directory separator to the end of the filename.
-****************************************************************************/
-void PMAPI PM_backslash(
- char *s)
-{
- uint pos = strlen(s);
- if (s[pos-1] != '/') {
- s[pos] = '/';
- s[pos+1] = '\0';
- }
-}
-
-/****************************************************************************
-REMARKS:
-Add a user defined PM_fatalError cleanup function.
-****************************************************************************/
-void PMAPI PM_setFatalErrorCleanup(
- void (PMAPIP cleanup)(void))
-{
- fatalErrorCleanup = cleanup;
-}
-
-/****************************************************************************
-REMARKS:
-Report a fatal error condition and halt the program.
-****************************************************************************/
-void PMAPI PM_fatalError(
- const char *msg)
-{
- /* TODO: If you are running in a GUI environment without a console, */
- /* this needs to be changed to bring up a fatal error message */
- /* box and terminate the program. */
- if (fatalErrorCleanup)
- fatalErrorCleanup();
- fprintf(stderr,"%s\n", msg);
- exit(1);
-}
-
-/****************************************************************************
-REMARKS:
-Exit handler to kill the VESA transfer buffer.
-****************************************************************************/
-static void ExitVBEBuf(void)
-{
- /* TODO: If you do not have BIOS access, remove this function. */
- if (VESABuf_ptr)
- PM_freeRealSeg(VESABuf_ptr);
- VESABuf_ptr = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate the real mode VESA transfer buffer for communicating with the BIOS.
-****************************************************************************/
-void * PMAPI PM_getVESABuf(
- uint *len,
- uint *rseg,
- uint *roff)
-{
- /* TODO: If you do not have BIOS access, simply delete the guts of */
- /* this function and return NULL. */
- if (!VESABuf_ptr) {
- /* Allocate a global buffer for communicating with the VESA VBE */
- if ((VESABuf_ptr = PM_allocRealSeg(VESABuf_len, &VESABuf_rseg, &VESABuf_roff)) == NULL)
- return NULL;
- atexit(ExitVBEBuf);
- }
- *len = VESABuf_len;
- *rseg = VESABuf_rseg;
- *roff = VESABuf_roff;
- return VESABuf_ptr;
-}
-
-/****************************************************************************
-REMARKS:
-Check if a key has been pressed.
-****************************************************************************/
-int PMAPI PM_kbhit(void)
-{
- /* TODO: This function checks if a key is available to be read. This */
- /* should be implemented, but is mostly used by the test programs */
- /* these days. */
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-Wait for and return the next keypress.
-****************************************************************************/
-int PMAPI PM_getch(void)
-{
- /* TODO: This returns the ASCII code of the key pressed. This */
- /* should be implemented, but is mostly used by the test programs */
- /* these days. */
- return 0xD;
-}
-
-/****************************************************************************
-REMARKS:
-Open a fullscreen console mode for output.
-****************************************************************************/
-int PMAPI PM_openConsole(void)
-{
- /* TODO: Opens up a fullscreen console for graphics output. If your */
- /* console does not have graphics/text modes, this can be left */
- /* empty. The main purpose of this is to disable console switching */
- /* when in graphics modes if you can switch away from fullscreen */
- /* consoles (if you want to allow switching, this can be done */
- /* elsewhere with a full save/restore state of the graphics mode). */
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Return the size of the state buffer used to save the console state.
-****************************************************************************/
-int PMAPI PM_getConsoleStateSize(void)
-{
- /* TODO: Returns the size of the console state buffer used to save the */
- /* state of the console before going into graphics mode. This is */
- /* used to restore the console back to normal when we are done. */
- return 1;
-}
-
-/****************************************************************************
-REMARKS:
-Save the state of the console into the state buffer.
-****************************************************************************/
-void PMAPI PM_saveConsoleState(
- void *stateBuf,
- int console_id)
-{
- /* TODO: Saves the state of the console into the state buffer. This is */
- /* used to restore the console back to normal when we are done. */
- /* We will always restore 80x25 text mode after being in graphics */
- /* mode, so if restoring text mode is all you need to do this can */
- /* be left empty. */
-}
-
-/****************************************************************************
-REMARKS:
-Restore the state of the console from the state buffer.
-****************************************************************************/
-void PMAPI PM_restoreConsoleState(
- const void *stateBuf,
- int console_id)
-{
- /* TODO: Restore the state of the console from the state buffer. This is */
- /* used to restore the console back to normal when we are done. */
- /* We will always restore 80x25 text mode after being in graphics */
- /* mode, so if restoring text mode is all you need to do this can */
- /* be left empty. */
-}
-
-/****************************************************************************
-REMARKS:
-Close the console and return to non-fullscreen console mode.
-****************************************************************************/
-void PMAPI PM_closeConsole(
- int console_id)
-{
- /* TODO: Close the console when we are done, going back to text mode. */
-}
-
-/****************************************************************************
-REMARKS:
-Set the location of the OS console cursor.
-****************************************************************************/
-void PM_setOSCursorLocation(
- int x,
- int y)
-{
- /* TODO: Set the OS console cursor location to the new value. This is */
- /* generally used for new OS ports (used mostly for DOS). */
-}
-
-/****************************************************************************
-REMARKS:
-Set the width of the OS console.
-****************************************************************************/
-void PM_setOSScreenWidth(
- int width,
- int height)
-{
- /* TODO: Set the OS console screen width. This is generally unused for */
- /* new OS ports. */
-}
-
-/****************************************************************************
-REMARKS:
-Set the real time clock handler (used for software stereo modes).
-****************************************************************************/
-ibool PMAPI PM_setRealTimeClockHandler(
- PM_intHandler ih,
- int frequency)
-{
- /* TODO: Install a real time clock interrupt handler. Normally this */
- /* will not be supported from most OS'es in user land, so an */
- /* alternative mechanism is needed to enable software stereo. */
- /* Hence leave this unimplemented unless you have a high priority */
- /* mechanism to call the 32-bit callback when the real time clock */
- /* interrupt fires. */
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Set the real time clock frequency (for stereo modes).
-****************************************************************************/
-void PMAPI PM_setRealTimeClockFrequency(
- int frequency)
-{
- /* TODO: Set the real time clock interrupt frequency. Used for stereo */
- /* LC shutter glasses when doing software stereo. Usually sets */
- /* the frequency to around 2048 Hz. */
-}
-
-/****************************************************************************
-REMARKS:
-Restore the original real time clock handler.
-****************************************************************************/
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
- /* TODO: Restores the real time clock handler. */
-}
-
-/****************************************************************************
-REMARKS:
-Return the current operating system path or working directory.
-****************************************************************************/
-char * PMAPI PM_getCurrentPath(
- char *path,
- int maxLen)
-{
- return getcwd(path,maxLen);
-}
-
-/****************************************************************************
-REMARKS:
-Return the drive letter for the boot drive.
-****************************************************************************/
-char PMAPI PM_getBootDrive(void)
-{
- /* TODO: Return the boot drive letter for the OS. Normally this is 'c' */
- /* for DOS based OS'es and '/' for Unices. */
- return '/';
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the VBE/AF driver files (legacy and not used).
-****************************************************************************/
-const char * PMAPI PM_getVBEAFPath(void)
-{
- return PM_getNucleusConfigPath();
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the Nucleus driver files.
-****************************************************************************/
-const char * PMAPI PM_getNucleusPath(void)
-{
- /* TODO: Change this to the default path to Nucleus driver files. The */
- /* following is the default for Unices. */
- char *env = getenv("NUCLEUS_PATH");
- return env ? env : "/usr/lib/nucleus";
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the Nucleus configuration files.
-****************************************************************************/
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
- static char path[256];
- strcpy(path,PM_getNucleusPath());
- PM_backslash(path);
- strcat(path,"config");
- return path;
-}
-
-/****************************************************************************
-REMARKS:
-Return a unique identifier for the machine if possible.
-****************************************************************************/
-const char * PMAPI PM_getUniqueID(void)
-{
- /* TODO: Return a unique ID for the machine. If a unique ID is not */
- /* available, return the machine name. */
- static char buf[128];
- gethostname(buf, 128);
- return buf;
-}
-
-/****************************************************************************
-REMARKS:
-Get the name of the machine on the network.
-****************************************************************************/
-const char * PMAPI PM_getMachineName(void)
-{
- /* TODO: Return the network machine name for the machine. */
- static char buf[128];
- gethostname(buf, 128);
- return buf;
-}
-
-/****************************************************************************
-REMARKS:
-Return a pointer to the real mode BIOS data area.
-****************************************************************************/
-void * PMAPI PM_getBIOSPointer(void)
-{
- /* TODO: This returns a pointer to the real mode BIOS data area. If you */
- /* do not support BIOS access, you can simply return NULL here. */
- if (!zeroPtr)
- zeroPtr = PM_mapPhysicalAddr(0,0xFFFFF,true);
- return (void*)(zeroPtr + 0x400);
-}
-
-/****************************************************************************
-REMARKS:
-Return a pointer to 0xA0000 physical VGA graphics framebuffer.
-****************************************************************************/
-void * PMAPI PM_getA0000Pointer(void)
-{
- static void *bankPtr;
- if (!bankPtr)
- bankPtr = PM_mapPhysicalAddr(0xA0000,0xFFFF,true);
- return bankPtr;
-}
-
-/****************************************************************************
-REMARKS:
-Map a physical address to a linear address in the callers process.
-****************************************************************************/
-void * PMAPI PM_mapPhysicalAddr(
- ulong base,
- ulong limit,
- ibool isCached)
-{
- /* TODO: This function maps a physical memory address to a linear */
- /* address in the address space of the calling process. */
-
- /* NOTE: This function *must* be able to handle any phsyical base */
- /* address, and hence you will have to handle rounding of */
- /* the physical base address to a page boundary (ie: 4Kb on */
- /* x86 CPU's) to be able to properly map in the memory */
- /* region. */
-
- /* NOTE: If possible the isCached bit should be used to ensure that */
- /* the PCD (Page Cache Disable) and PWT (Page Write Through) */
- /* bits are set to disable caching for a memory mapping used */
- /* for MMIO register access. We also disable caching using */
- /* the MTRR registers for Pentium Pro and later chipsets so if */
- /* MTRR support is enabled for your OS then you can safely ignore */
- /* the isCached flag and always enable caching in the page */
- /* tables. */
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a physical address mapping allocated by PM_mapPhysicalAddr.
-****************************************************************************/
-void PMAPI PM_freePhysicalAddr(
- void *ptr,
- ulong limit)
-{
- /* TODO: This function will free a physical memory mapping previously */
- /* allocated with PM_mapPhysicalAddr() if at all possible. If */
- /* you can't free physical memory mappings, simply do nothing. */
-}
-
-/****************************************************************************
-REMARKS:
-Find the physical address of a linear memory address in current process.
-****************************************************************************/
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{
- /* TODO: This function should find the physical address of a linear */
- /* address. */
- return 0xFFFFFFFFUL;
-}
-
-void PMAPI PM_sleep(ulong milliseconds)
-{
- /* TODO: Put the process to sleep for milliseconds */
-}
-
-int PMAPI PM_getCOMPort(int port)
-{
- /* TODO: Re-code this to determine real values using the Plug and Play */
- /* manager for the OS. */
- switch (port) {
- case 0: return 0x3F8;
- case 1: return 0x2F8;
- }
- return 0;
-}
-
-int PMAPI PM_getLPTPort(int port)
-{
- /* TODO: Re-code this to determine real values using the Plug and Play */
- /* manager for the OS. */
- switch (port) {
- case 0: return 0x3BC;
- case 1: return 0x378;
- case 2: return 0x278;
- }
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of (unnamed) shared memory.
-****************************************************************************/
-void * PMAPI PM_mallocShared(
- long size)
-{
- /* TODO: This is used to allocate memory that is shared between process */
- /* that all access the common Nucleus drivers via a common display */
- /* driver DLL. If your OS does not support shared memory (or if */
- /* the display driver does not need to allocate shared memory */
- /* for each process address space), this should just call PM_malloc. */
- return PM_malloc(size);
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of shared memory.
-****************************************************************************/
-void PMAPI PM_freeShared(
- void *ptr)
-{
- /* TODO: Free the shared memory block. This will be called in the context */
- /* of the original calling process that allocated the shared */
- /* memory with PM_mallocShared. Simply call PM_free if you do not */
- /* need this. */
- PM_free(ptr);
-}
-
-/****************************************************************************
-REMARKS:
-Map a linear memory address to the calling process address space. The
-address will have been allocated in another process using the
-PM_mapPhysicalAddr function.
-****************************************************************************/
-void * PMAPI PM_mapToProcess(
- void *base,
- ulong limit)
-{
- /* TODO: This function is used to map a physical memory mapping */
- /* previously allocated with PM_mapPhysicalAddr into the */
- /* address space of the calling process. If the memory mapping */
- /* allocated by PM_mapPhysicalAddr is global to all processes, */
- /* simply return the pointer. */
-
- /* NOTE: This function must also handle rounding to page boundaries, */
- /* since this function is used to map in shared memory buffers */
- /* allocated with PM_mapPhysicalAddr(). Hence if you aligned */
- /* the physical address above, then you also need to do it here. */
- return base;
-}
-
-/****************************************************************************
-REMARKS:
-Map a real mode pointer to a protected mode pointer.
-****************************************************************************/
-void * PMAPI PM_mapRealPointer(
- uint r_seg,
- uint r_off)
-{
- /* TODO: This function maps a real mode memory pointer into the */
- /* calling processes address space as a 32-bit near pointer. If */
- /* you do not support BIOS access, simply return NULL here. */
- if (!zeroPtr)
- zeroPtr = PM_mapPhysicalAddr(0,0xFFFFF);
- return (void*)(zeroPtr + MK_PHYS(r_seg,r_off));
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of real mode memory
-****************************************************************************/
-void * PMAPI PM_allocRealSeg(
- uint size,
- uint *r_seg,
- uint *r_off)
-{
- /* TODO: This function allocates a block of real mode memory for the */
- /* calling process used to communicate with real mode BIOS */
- /* functions. If you do not support BIOS access, simply return */
- /* NULL here. */
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of real mode memory.
-****************************************************************************/
-void PMAPI PM_freeRealSeg(
- void *mem)
-{
- /* TODO: Frees a previously allocated real mode memory block. If you */
- /* do not support BIOS access, this function should be empty. */
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt (parameters in DPMI compatible structure)
-****************************************************************************/
-void PMAPI DPMI_int86(
- int intno,
- DPMI_regs *regs)
-{
- /* TODO: This function calls the real mode BIOS using the passed in */
- /* register structure. If you do not support real mode BIOS */
- /* access, this function should be empty. */
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt.
-****************************************************************************/
-int PMAPI PM_int86(
- int intno,
- RMREGS *in,
- RMREGS *out)
-{
- /* TODO: This function calls the real mode BIOS using the passed in */
- /* register structure. If you do not support real mode BIOS */
- /* access, this function should return 0. */
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt.
-****************************************************************************/
-int PMAPI PM_int86x(
- int intno,
- RMREGS *in,
- RMREGS *out,
- RMSREGS *sregs)
-{
- /* TODO: This function calls the real mode BIOS using the passed in */
- /* register structure. If you do not support real mode BIOS */
- /* access, this function should return 0. */
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Call a real mode far function.
-****************************************************************************/
-void PMAPI PM_callRealMode(
- uint seg,
- uint off,
- RMREGS *in,
- RMSREGS *sregs)
-{
- /* TODO: This function calls a real mode far function with a far call. */
- /* If you do not support BIOS access, this function should be */
- /* empty. */
-}
-
-/****************************************************************************
-REMARKS:
-Return the amount of available memory.
-****************************************************************************/
-void PMAPI PM_availableMemory(
- ulong *physical,
- ulong *total)
-{
- /* TODO: Report the amount of available memory, both the amount of */
- /* physical memory left and the amount of virtual memory left. */
- /* If the OS does not provide these services, report 0's. */
- *physical = *total = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of locked, physical memory for DMA operations.
-****************************************************************************/
-void * PMAPI PM_allocLockedMem(
- uint size,
- ulong *physAddr,
- ibool contiguous,
- ibool below16M)
-{
- /* TODO: Allocate a block of locked, physical memory of the specified */
- /* size. This is used for bus master operations. If this is not */
- /* supported by the OS, return NULL and bus mastering will not */
- /* be used. */
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of locked physical memory.
-****************************************************************************/
-void PMAPI PM_freeLockedMem(
- void *p,
- uint size,
- ibool contiguous)
-{
- /* TODO: Free a memory block allocated with PM_allocLockedMem. */
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display banks.
-****************************************************************************/
-void PMAPI PM_setBankA(
- int bank)
-{
- RMREGS regs;
-
- /* TODO: This does a bank switch function by calling the real mode */
- /* VESA BIOS. If you do not support BIOS access, this function should */
- /* be empty. */
- regs.x.ax = 0x4F05;
- regs.x.bx = 0x0000;
- regs.x.dx = bank;
- PM_int86(0x10,&regs,&regs);
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display banks.
-****************************************************************************/
-void PMAPI PM_setBankAB(
- int bank)
-{
- RMREGS regs;
-
- /* TODO: This does a bank switch function by calling the real mode */
- /* VESA BIOS. If you do not support BIOS access, this function should */
- /* be empty. */
- regs.x.ax = 0x4F05;
- regs.x.bx = 0x0000;
- regs.x.dx = bank;
- PM_int86(0x10,&regs,&regs);
- regs.x.ax = 0x4F05;
- regs.x.bx = 0x0001;
- regs.x.dx = bank;
- PM_int86(0x10,&regs,&regs);
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display start address.
-****************************************************************************/
-void PMAPI PM_setCRTStart(
- int x,
- int y,
- int waitVRT)
-{
- RMREGS regs;
-
- /* TODO: This changes the display start address by calling the real mode */
- /* VESA BIOS. If you do not support BIOS access, this function */
- /* should be empty. */
- regs.x.ax = 0x4F07;
- regs.x.bx = waitVRT;
- regs.x.cx = x;
- regs.x.dx = y;
- PM_int86(0x10,&regs,&regs);
-}
-
-/****************************************************************************
-REMARKS:
-Enable write combining for the memory region.
-****************************************************************************/
-ibool PMAPI PM_enableWriteCombine(
- ulong base,
- ulong length,
- uint type)
-{
- /* TODO: This function should enable Pentium Pro and Pentium II MTRR */
- /* write combining for the passed in physical memory base address */
- /* and length. Normally this is done via calls to an OS specific */
- /* device driver as this can only be done at ring 0. */
- /* */
- /* NOTE: This is a *very* important function to implement! If you do */
- /* not implement, graphics performance on the latest Intel chips */
- /* will be severly impaired. For sample code that can be used */
- /* directly in a ring 0 device driver, see the MSDOS implementation */
- /* which includes assembler code to do this directly (if the */
- /* program is running at ring 0). */
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Execute the POST on the secondary BIOS for a controller.
-****************************************************************************/
-ibool PMAPI PM_doBIOSPOST(
- ushort axVal,
- ulong BIOSPhysAddr,
- void *mappedBIOS)
-{
- /* TODO: This function is used to run the BIOS POST code on a secondary */
- /* controller to initialise it for use. This is not necessary */
- /* for multi-controller operation, but it will make it a lot */
- /* more convenicent for end users (otherwise they have to boot */
- /* the system once with the secondary controller as primary, and */
- /* then boot with both controllers installed). */
- /* */
- /* Even if you don't support full BIOS access, it would be */
- /* adviseable to be able to POST the secondary controllers in the */
- /* system using this function as a minimum requirement. Some */
- /* graphics hardware has registers that contain values that only */
- /* the BIOS knows about, which makes bring up a card from cold */
- /* reset difficult if the BIOS has not POST'ed it. */
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Load an OS specific shared library or DLL. If the OS does not support
-shared libraries, simply return NULL.
-****************************************************************************/
-PM_MODULE PMAPI PM_loadLibrary(
- const char *szDLLName)
-{
- /* TODO: This function should load a native shared library from disk */
- /* given the path to the library. */
- (void)szDLLName;
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Get the address of a named procedure from a shared library.
-****************************************************************************/
-void * PMAPI PM_getProcAddress(
- PM_MODULE hModule,
- const char *szProcName)
-{
- /* TODO: This function should return the address of a named procedure */
- /* from a native shared library. */
- (void)hModule;
- (void)szProcName;
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Unload a shared library.
-****************************************************************************/
-void PMAPI PM_freeLibrary(
- PM_MODULE hModule)
-{
- /* TODO: This function free a previously loaded native shared library. */
- (void)hModule;
-}
-
-/****************************************************************************
-REMARKS:
-Enable requested I/O privledge level (usually only to set to a value of
-3, and then restore it back again). If the OS is protected this function
-must be implemented in order to enable I/O port access for ring 3
-applications. The function should return the IOPL level active before
-the switch occurred so it can be properly restored.
-****************************************************************************/
-int PMAPI PM_setIOPL(
- int level)
-{
- /* TODO: This function should enable IOPL for the task (if IOPL is */
- /* not always enabled for the app through some other means). */
- return level;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-void *PMAPI PM_findFirstFile(
- const char *filename,
- PM_findData *findData)
-{
- /* TODO: This function should start a directory enumeration search */
- /* given the filename (with wildcards). The data should be */
- /* converted and returned in the findData standard form. */
- (void)filename;
- (void)findData;
- return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
- void *handle,
- PM_findData *findData)
-{
- /* TODO: This function should find the next file in directory enumeration */
- /* search given the search criteria defined in the call to */
- /* PM_findFirstFile. The data should be converted and returned */
- /* in the findData standard form. */
- (void)handle;
- (void)findData;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
- void *handle)
-{
- /* TODO: This function should close the find process. This may do */
- /* nothing for some OS'es. */
- (void)handle;
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
- 1 - Drive A:
- 2 - Drive B:
- 3 - Drive C:
- etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
- char drive)
-{
- if (drive == 3)
- return true;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
- int drive,
- char *dir,
- int len)
-{
- (void)drive;
- getcwd(dir,len);
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
- const char *filename,
- uint attrib)
-{
- /* TODO: Set the file attributes for a file */
- (void)filename;
- (void)attrib;
-}
-
-/****************************************************************************
-REMARKS:
-Function to create a directory.
-****************************************************************************/
-ibool PMAPI PM_mkdir(
- const char *filename)
-{
- return mkdir(filename) == 0;
-}
-
-/****************************************************************************
-REMARKS:
-Function to remove a directory.
-****************************************************************************/
-ibool PMAPI PM_rmdir(
- const char *filename)
-{
- return rmdir(filename) == 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/stub/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/stub/vflat.c
deleted file mode 100644
index 579ef2c95c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/stub/vflat.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-ibool PMAPI VF_available(void)
-{
- return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
- baseAddr = baseAddr;
- bankSize = bankSize;
- codeLen = codeLen;
- bankFunc = bankFunc;
- return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/stub/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/stub/ztimer.c
deleted file mode 100644
index 820e292390..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/stub/ztimer.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: *** TODO: ADD YOUR OS ENVIRONMENT NAME HERE ***
-*
-* Description: OS specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-void __ZTimerInit(void)
-{
- /* TODO: Do any specific internal initialisation in here */
-}
-
-/****************************************************************************
-REMARKS:
-Start the Zen Timer counting.
-****************************************************************************/
-static void __LZTimerOn(
- LZTimerObject *tm)
-{
- /* TODO: Start the Zen Timer counting. This should be a macro if */
- /* possible. */
-}
-
-/****************************************************************************
-REMARKS:
-Compute the lap time since the timer was started.
-****************************************************************************/
-static ulong __LZTimerLap(
- LZTimerObject *tm)
-{
- /* TODO: Compute the lap time between the current time and when the */
- /* timer was started. */
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Stop the Zen Timer counting.
-****************************************************************************/
-static void __LZTimerOff(
- LZTimerObject *tm)
-{
- /* TODO: Stop the timer counting. Should be a macro if possible. */
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time in microseconds between start and end timings.
-****************************************************************************/
-static ulong __LZTimerCount(
- LZTimerObject *tm)
-{
- /* TODO: Compute the elapsed time and return it. Always microseconds. */
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION 1
-
-/****************************************************************************
-REMARKS:
-Read the Long Period timer from the OS
-****************************************************************************/
-static ulong __ULZReadTime(void)
-{
- /* TODO: Read the long period timer from the OS. The resolution of this */
- /* timer should be around 1/20 of a second for timing long */
- /* periods if possible. */
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{ return finish - start; }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/altbrk.c b/board/MAI/bios_emulator/scitech/src/pm/tests/altbrk.c
deleted file mode 100644
index ba90262745..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/altbrk.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-*
-* Language: ANSI C
-* Environment: any
-*
-* Description: Test program to check the ability to install a C based
-* control C/break interrupt handler. Note that this
-* alternate version does not work with all extenders.
-*
-* Functions tested: PM_installAltBreakHandler()
-* PM_restoreBreakHandler()
-*
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-volatile int breakHit = false;
-volatile int ctrlCHit = false;
-
-#pragma off (check_stack) /* No stack checking under Watcom */
-
-void PMAPI breakHandler(uint bHit)
-{
- if (bHit)
- breakHit = true;
- else
- ctrlCHit = true;
-}
-
-int main(void)
-{
- printf("Program running in ");
- switch (PM_getModeType()) {
- case PM_realMode:
- printf("real mode.\n\n");
- break;
- case PM_286:
- printf("16 bit protected mode.\n\n");
- break;
- case PM_386:
- printf("32 bit protected mode.\n\n");
- break;
- }
-
- PM_installAltBreakHandler(breakHandler);
- printf("Control C/Break interrupt handler installed\n");
- while (1) {
- if (ctrlCHit) {
- printf("Code termimated with Ctrl-C.\n");
- break;
- }
- if (breakHit) {
- printf("Code termimated with Ctrl-Break.\n");
- break;
- }
- if (PM_kbhit() && PM_getch() == 0x1B) {
- printf("No break code detected!\n");
- break;
- }
- printf("Hit Ctrl-C or Ctrl-Break to exit!\n");
- }
-
- PM_restoreBreakHandler();
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/altcrit.c b/board/MAI/bios_emulator/scitech/src/pm/tests/altcrit.c
deleted file mode 100644
index e13730758e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/altcrit.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-*
-* Language: ANSI C
-* Environment: any
-*
-* Description: Test program to check the ability to install a C based
-* critical error handler.
-*
-* Functions tested: PM_installCriticalHandler()
-* PM_criticalError()
-* PM_restoreCriticalHandler()
-*
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-volatile uint criticalError = false;
-volatile uint axValue;
-volatile uint diValue;
-
-#pragma off (check_stack) /* No stack checking under Watcom */
-
-uint PMAPI criticalHandler(uint axVal,uint diVal)
-{
- criticalError = true;
- axValue = axVal;
- diValue = diVal;
- return 3; /* Tell MS-DOS to fail the operation */
-}
-
-int main(void)
-{
- FILE *f;
-
- printf("Program running in ");
- switch (PM_getModeType()) {
- case PM_realMode:
- printf("real mode.\n\n");
- break;
- case PM_286:
- printf("16 bit protected mode.\n\n");
- break;
- case PM_386:
- printf("32 bit protected mode.\n\n");
- break;
- }
-
- PM_installAltCriticalHandler(criticalHandler);
- printf("Critical Error handler installed - trying to read from A: drive...\n");
- f = fopen("a:\bog.bog","rb");
- if (f) fclose(f);
- if (criticalError) {
- printf("Critical error occured on INT 21h function %02X!\n",
- axValue >> 8);
- }
- else
- printf("Critical error was not caught!\n");
- PM_restoreCriticalHandler();
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/biosptr.c b/board/MAI/bios_emulator/scitech/src/pm/tests/biosptr.c
deleted file mode 100644
index 5fa3382483..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/biosptr.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: any
-*
-* Description: Test program to check the ability to manipulate the
-* BIOS data area from protected mode using the PM
-* library. Compile and link with the appropriate command
-* line for your DOS extender.
-*
-* Functions tested: PM_getBIOSSelector()
-* PM_getLong()
-* PM_getByte()
-* PM_getWord()
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-/* Macros to obtain values from the BIOS data area */
-
-#define TICKS() PM_getLong(bios+0x6C)
-#define KB_STAT PM_getByte(bios+0x17)
-#define KB_HEAD PM_getWord(bios+0x1A)
-#define KB_TAIL PM_getWord(bios+0x1C)
-
-/* Macros for working with the keyboard buffer */
-
-#define KB_HIT() (KB_HEAD != KB_TAIL)
-#define CTRL() (KB_STAT & 4)
-#define SHIFT() (KB_STAT & 2)
-#define ESC 0x1B
-
-/* Selector for BIOS data area */
-
-uchar *bios;
-
-int main(void)
-{
- int c,done = 0;
-
- printf("Program running in ");
- switch (PM_getModeType()) {
- case PM_realMode:
- printf("real mode.\n\n");
- break;
- case PM_286:
- printf("16 bit protected mode.\n\n");
- break;
- case PM_386:
- printf("32 bit protected mode.\n\n");
- break;
- }
-
- bios = PM_getBIOSPointer();
- printf("Hit any key to test, Ctrl-Shift-Esc to quit\n");
- while (!done) {
- if (KB_HIT()) {
- c = PM_getch();
- if (c == 0) PM_getch();
- printf("TIME=%-8lX ST=%02X CHAR=%02X ", TICKS(), KB_STAT, c);
- printf("\n");
- if ((c == ESC) && SHIFT() && CTRL())/* Ctrl-Shift-Esc */
- break;
- }
- }
-
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/block.c b/board/MAI/bios_emulator/scitech/src/pm/tests/block.c
deleted file mode 100644
index 15d503c0de..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/block.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Test program for the PM_blockUntilTimeout function.
-*
-****************************************************************************/
-
-#include <stdio.h>
-#include "pmapi.h"
-
-#define DELAY_MSECS 1100
-#define LOOPS 5
-
-/*-------------------------- Implementation -------------------------------*/
-
-/* The following routine takes a long count in microseconds and outputs
- * a string representing the count in seconds. It could be modified to
- * return a pointer to a static string representing the count rather
- * than printing it out.
- */
-
-void ReportTime(ulong count)
-{
- ulong secs;
-
- secs = count / 1000000L;
- count = count - secs * 1000000L;
- printf("Time taken: %lu.%06lu seconds\n",secs,count);
-}
-
-int main(void)
-{
- int i;
-
- printf("Detecting processor information ...");
- fflush(stdout);
- printf("\n\n%s\n", CPU_getProcessorName());
- ZTimerInit();
- LZTimerOn();
- for (i = 0; i < LOOPS; i++) {
- PM_blockUntilTimeout(DELAY_MSECS);
- ReportTime(LZTimerLap());
- }
- LZTimerOff();
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/brk.c b/board/MAI/bios_emulator/scitech/src/pm/tests/brk.c
deleted file mode 100644
index 10b644656e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/brk.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-*
-* Language: ANSI C
-* Environment: any
-*
-* Description: Test program to check the ability to install a C based
-* control C/break interrupt handler.
-*
-* Functions tested: PM_installBreakHandler()
-* PM_ctrlCHit()
-* PM_ctrlBreakHit()
-* PM_restoreBreakHandler()
-*
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-int main(void)
-{
- printf("Program running in ");
- switch (PM_getModeType()) {
- case PM_realMode:
- printf("real mode.\n\n");
- break;
- case PM_286:
- printf("16 bit protected mode.\n\n");
- break;
- case PM_386:
- printf("32 bit protected mode.\n\n");
- break;
- }
-
- PM_installBreakHandler();
- printf("Control C/Break interrupt handler installed\n");
- while (1) {
- if (PM_ctrlCHit(1)) {
- printf("Code termimated with Ctrl-C.\n");
- break;
- }
- if (PM_ctrlBreakHit(1)) {
- printf("Code termimated with Ctrl-Break.\n");
- break;
- }
- if (PM_kbhit() && PM_getch() == 0x1B) {
- printf("No break code detected!\n");
- break;
- }
- printf("Hit Ctrl-C or Ctrl-Break to exit!\n");
- }
-
- PM_restoreBreakHandler();
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/callreal.c b/board/MAI/bios_emulator/scitech/src/pm/tests/callreal.c
deleted file mode 100644
index 4d37cab465..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/callreal.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: any
-*
-* Description: Test program to check the ability to call a real mode
-* procedure. We simply copy a terribly simple assembly
-* language routine into a real mode block that we allocate,
-* and then attempt to call the routine and verify that it
-* was successful.
-*
-* Functions tested: PM_allocRealSeg()
-* PM_freeRealSeg()
-* PM_callRealMode()
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include "pmapi.h"
-
-/* Block of real mode code we will eventually call */
-
-static unsigned char realModeCode[] = {
- 0x93, /* xchg ax,bx */
- 0x87, 0xCA, /* xchg cx,dx */
- 0xCB /* retf */
- };
-
-int main(void)
-{
- RMREGS regs;
- RMSREGS sregs;
- uchar *p;
- unsigned r_seg,r_off;
-
- printf("Program running in ");
- switch (PM_getModeType()) {
- case PM_realMode:
- printf("real mode.\n\n");
- break;
- case PM_286:
- printf("16 bit protected mode.\n\n");
- break;
- case PM_386:
- printf("32 bit protected mode.\n\n");
- break;
- }
-
- /* Allocate a the block of real mode memory */
- if ((p = PM_allocRealSeg(sizeof(realModeCode), &r_seg, &r_off)) == NULL) {
- printf("Unable to allocate real mode memory!\n");
- exit(1);
- }
-
- /* Copy the real mode code */
- memcpy(p,realModeCode,sizeof(realModeCode));
-
- /* Now call the real mode code */
- regs.x.ax = 1;
- regs.x.bx = 2;
- regs.x.cx = 3;
- regs.x.dx = 4;
- regs.x.si = 5;
- regs.x.di = 6;
- sregs.es = 7;
- sregs.ds = 8;
- PM_callRealMode(r_seg,r_off,&regs,&sregs);
- if (regs.x.ax != 2 || regs.x.bx != 1 || regs.x.cx != 4 || regs.x.dx != 3
- || regs.x.si != 5 || regs.x.di != 6 || sregs.es != 7
- || sregs.ds != 8) {
- printf("Real mode call failed!\n");
- printf("\n");
- printf("ax = %04X, bx = %04X, cx = %04X, dx = %04X\n",
- regs.x.ax,regs.x.bx,regs.x.cx,regs.x.dx);
- printf("si = %04X, di = %04X, es = %04X, ds = %04X\n",
- regs.x.si,regs.x.di,sregs.es,sregs.ds);
- }
- else
- printf("Real mode call succeeded!\n");
-
- /* Free the memory we allocated */
- PM_freeRealSeg(p);
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/checks.c b/board/MAI/bios_emulator/scitech/src/pm/tests/checks.c
deleted file mode 100644
index 5933ac9f73..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/checks.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Main module for building checked builds of products with
-* assertions and trace code.
-*
-****************************************************************************/
-
-#include "scitech.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#ifdef __WINDOWS__
-#define WIN32_LEAN_AND_MEAN
-#define STRICT
-#include <windows.h>
-#endif
-
-#ifdef CHECKED
-
-/*---------------------------- Global variables ---------------------------*/
-
-#define LOGFILE "\\scitech.log"
-
-void (*_CHK_fail)(int fatal,const char *msg,const char *cond,const char *file,int line) = _CHK_defaultFail;
-
-/*---------------------------- Implementation -----------------------------*/
-
-/****************************************************************************
-DESCRIPTION:
-Handles fatal error and warning conditions for checked builds.
-
-HEADER:
-scitech.h
-
-REMARKS:
-This function is called whenever an inline check or warning fails in any
-of the SciTech runtime libraries. Warning conditions simply cause the
-condition to be logged to the log file and send to the system debugger
-under Window. Fatal error conditions do all of the above, and then
-terminate the program with a fatal error conditions.
-
-This handler may be overriden by the user code if necessary to replace it
-with a different handler (the MGL for instance overrides this and replaces
-it with a handler that does an MGL_exit() before terminating the application
-so that it will clean up correctly.
-****************************************************************************/
-void _CHK_defaultFail(
- int fatal,
- const char *msg,
- const char *cond,
- const char *file,
- int line)
-{
- char buf[256];
- FILE *log = fopen(LOGFILE, "at+");
-
- sprintf(buf,msg,cond,file,line);
- if (log) {
- fputs(buf,log);
- fflush(log);
- fclose(log);
-#ifdef __WINDOWS__
- OutputDebugStr(buf);
-#endif
- }
- if (fatal) {
-#ifdef __WINDOWS__
- MessageBox(NULL, buf,"Fatal Error!",MB_ICONEXCLAMATION);
-#else
- fputs(buf,stderr);
-#endif
- exit(-1);
- }
-}
-
-#endif /* CHECKED */
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/cpu.c b/board/MAI/bios_emulator/scitech/src/pm/tests/cpu.c
deleted file mode 100644
index 30e5dd30df..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/cpu.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Test program for the CPU detection code.
-*
-****************************************************************************/
-
-#include "ztimer.h"
-#include "pmapi.h"
-#include <stdio.h>
-#include <stdlib.h>
-
-/*----------------------------- Implementation ----------------------------*/
-
-int main(void)
-{
- printf("Detecting processor information ...");
- fflush(stdout);
- printf("\n\n%s\n", CPU_getProcessorName());
- if (CPU_haveRDTSC())
- printf("\nProcessor supports Read Time Stamp Counter performance timer.\n");
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/critical.c b/board/MAI/bios_emulator/scitech/src/pm/tests/critical.c
deleted file mode 100644
index 60f1251a5d..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/critical.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-*
-* Language: ANSI C
-* Environment: any
-*
-* Description: Test program to check the ability to install a C based
-* critical error handler.
-*
-* Functions tested: PM_installAltCriticalHandler()
-* PM_restoreCriticalHandler()
-*
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-int main(void)
-{
- FILE *f;
- int axcode,dicode;
-
- printf("Program running in ");
- switch (PM_getModeType()) {
- case PM_realMode:
- printf("real mode.\n\n");
- break;
- case PM_286:
- printf("16 bit protected mode.\n\n");
- break;
- case PM_386:
- printf("32 bit protected mode.\n\n");
- break;
- }
-
- PM_installCriticalHandler();
- printf("Critical Error handler installed - trying to read from A: drive...\n");
- f = fopen("a:\bog.bog","rb");
- if (f) fclose(f);
- if (PM_criticalError(&axcode,&dicode,1)) {
- printf("Critical error occured on INT 21h function %02X!\n",
- axcode >> 8);
- }
- else printf("Critical error was not caught!\n");
- PM_restoreCriticalHandler();
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/getch.c b/board/MAI/bios_emulator/scitech/src/pm/tests/getch.c
deleted file mode 100644
index 06c2180ceb..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/getch.c
+++ /dev/null
@@ -1,501 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Test program to test out the cross platform event handling
-* library.
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <ctype.h>
-#include "pmapi.h"
-#include "event.h"
-
-/* Translation table for key codes */
-
-typedef struct {
- int code;
- char *name;
- } KeyEntry;
-
-KeyEntry ASCIICodes[] = {
- {ASCII_ctrlA ,"ASCII_ctrlA"},
- {ASCII_ctrlB ,"ASCII_ctrlB"},
- {ASCII_ctrlC ,"ASCII_ctrlC"},
- {ASCII_ctrlD ,"ASCII_ctrlD"},
- {ASCII_ctrlE ,"ASCII_ctrlE"},
- {ASCII_ctrlF ,"ASCII_ctrlF"},
- {ASCII_ctrlG ,"ASCII_ctrlG"},
- {ASCII_backspace ,"ASCII_backspace"},
- {ASCII_ctrlH ,"ASCII_ctrlH"},
- {ASCII_tab ,"ASCII_tab"},
- {ASCII_ctrlI ,"ASCII_ctrlI"},
- {ASCII_ctrlJ ,"ASCII_ctrlJ"},
- {ASCII_ctrlK ,"ASCII_ctrlK"},
- {ASCII_ctrlL ,"ASCII_ctrlL"},
- {ASCII_enter ,"ASCII_enter"},
- {ASCII_ctrlM ,"ASCII_ctrlM"},
- {ASCII_ctrlN ,"ASCII_ctrlN"},
- {ASCII_ctrlO ,"ASCII_ctrlO"},
- {ASCII_ctrlP ,"ASCII_ctrlP"},
- {ASCII_ctrlQ ,"ASCII_ctrlQ"},
- {ASCII_ctrlR ,"ASCII_ctrlR"},
- {ASCII_ctrlS ,"ASCII_ctrlS"},
- {ASCII_ctrlT ,"ASCII_ctrlT"},
- {ASCII_ctrlU ,"ASCII_ctrlU"},
- {ASCII_ctrlV ,"ASCII_ctrlV"},
- {ASCII_ctrlW ,"ASCII_ctrlW"},
- {ASCII_ctrlX ,"ASCII_ctrlX"},
- {ASCII_ctrlY ,"ASCII_ctrlY"},
- {ASCII_ctrlZ ,"ASCII_ctrlZ"},
- {ASCII_esc ,"ASCII_esc"},
- {ASCII_space ,"ASCII_space"},
- {ASCII_exclamation ,"ASCII_exclamation"},
- {ASCII_quote ,"ASCII_quote"},
- {ASCII_pound ,"ASCII_pound"},
- {ASCII_dollar ,"ASCII_dollar"},
- {ASCII_percent ,"ASCII_percent"},
- {ASCII_ampersand ,"ASCII_ampersand"},
- {ASCII_apostrophe ,"ASCII_apostrophe"},
- {ASCII_leftBrace ,"ASCII_leftBrace"},
- {ASCII_rightBrace ,"ASCII_rightBrace"},
- {ASCII_times ,"ASCII_times"},
- {ASCII_plus ,"ASCII_plus"},
- {ASCII_comma ,"ASCII_comma"},
- {ASCII_minus ,"ASCII_minus"},
- {ASCII_period ,"ASCII_period"},
- {ASCII_divide ,"ASCII_divide"},
- {ASCII_0 ,"ASCII_0"},
- {ASCII_1 ,"ASCII_1"},
- {ASCII_2 ,"ASCII_2"},
- {ASCII_3 ,"ASCII_3"},
- {ASCII_4 ,"ASCII_4"},
- {ASCII_5 ,"ASCII_5"},
- {ASCII_6 ,"ASCII_6"},
- {ASCII_7 ,"ASCII_7"},
- {ASCII_8 ,"ASCII_8"},
- {ASCII_9 ,"ASCII_9"},
- {ASCII_colon ,"ASCII_colon"},
- {ASCII_semicolon ,"ASCII_semicolon"},
- {ASCII_lessThan ,"ASCII_lessThan"},
- {ASCII_equals ,"ASCII_equals"},
- {ASCII_greaterThan ,"ASCII_greaterThan"},
- {ASCII_question ,"ASCII_question"},
- {ASCII_at ,"ASCII_at"},
- {ASCII_A ,"ASCII_A"},
- {ASCII_B ,"ASCII_B"},
- {ASCII_C ,"ASCII_C"},
- {ASCII_D ,"ASCII_D"},
- {ASCII_E ,"ASCII_E"},
- {ASCII_F ,"ASCII_F"},
- {ASCII_G ,"ASCII_G"},
- {ASCII_H ,"ASCII_H"},
- {ASCII_I ,"ASCII_I"},
- {ASCII_J ,"ASCII_J"},
- {ASCII_K ,"ASCII_K"},
- {ASCII_L ,"ASCII_L"},
- {ASCII_M ,"ASCII_M"},
- {ASCII_N ,"ASCII_N"},
- {ASCII_O ,"ASCII_O"},
- {ASCII_P ,"ASCII_P"},
- {ASCII_Q ,"ASCII_Q"},
- {ASCII_R ,"ASCII_R"},
- {ASCII_S ,"ASCII_S"},
- {ASCII_T ,"ASCII_T"},
- {ASCII_U ,"ASCII_U"},
- {ASCII_V ,"ASCII_V"},
- {ASCII_W ,"ASCII_W"},
- {ASCII_X ,"ASCII_X"},
- {ASCII_Y ,"ASCII_Y"},
- {ASCII_Z ,"ASCII_Z"},
- {ASCII_leftSquareBrace ,"ASCII_leftSquareBrace"},
- {ASCII_backSlash ,"ASCII_backSlash"},
- {ASCII_rightSquareBrace ,"ASCII_rightSquareBrace"},
- {ASCII_caret ,"ASCII_caret"},
- {ASCII_underscore ,"ASCII_underscore"},
- {ASCII_leftApostrophe ,"ASCII_leftApostrophe"},
- {ASCII_a ,"ASCII_a"},
- {ASCII_b ,"ASCII_b"},
- {ASCII_c ,"ASCII_c"},
- {ASCII_d ,"ASCII_d"},
- {ASCII_e ,"ASCII_e"},
- {ASCII_f ,"ASCII_f"},
- {ASCII_g ,"ASCII_g"},
- {ASCII_h ,"ASCII_h"},
- {ASCII_i ,"ASCII_i"},
- {ASCII_j ,"ASCII_j"},
- {ASCII_k ,"ASCII_k"},
- {ASCII_l ,"ASCII_l"},
- {ASCII_m ,"ASCII_m"},
- {ASCII_n ,"ASCII_n"},
- {ASCII_o ,"ASCII_o"},
- {ASCII_p ,"ASCII_p"},
- {ASCII_q ,"ASCII_q"},
- {ASCII_r ,"ASCII_r"},
- {ASCII_s ,"ASCII_s"},
- {ASCII_t ,"ASCII_t"},
- {ASCII_u ,"ASCII_u"},
- {ASCII_v ,"ASCII_v"},
- {ASCII_w ,"ASCII_w"},
- {ASCII_x ,"ASCII_x"},
- {ASCII_y ,"ASCII_y"},
- {ASCII_z ,"ASCII_z"},
- {ASCII_leftCurlyBrace ,"ASCII_leftCurlyBrace"},
- {ASCII_verticalBar ,"ASCII_verticalBar"},
- {ASCII_rightCurlyBrace ,"ASCII_rightCurlyBrace"},
- {ASCII_tilde ,"ASCII_tilde"},
- {0 ,"ASCII_unknown"},
- };
-
-KeyEntry ScanCodes[] = {
- {KB_padEnter ,"KB_padEnter"},
- {KB_padMinus ,"KB_padMinus"},
- {KB_padPlus ,"KB_padPlus"},
- {KB_padTimes ,"KB_padTimes"},
- {KB_padDivide ,"KB_padDivide"},
- {KB_padLeft ,"KB_padLeft"},
- {KB_padRight ,"KB_padRight"},
- {KB_padUp ,"KB_padUp"},
- {KB_padDown ,"KB_padDown"},
- {KB_padInsert ,"KB_padInsert"},
- {KB_padDelete ,"KB_padDelete"},
- {KB_padHome ,"KB_padHome"},
- {KB_padEnd ,"KB_padEnd"},
- {KB_padPageUp ,"KB_padPageUp"},
- {KB_padPageDown ,"KB_padPageDown"},
- {KB_padCenter ,"KB_padCenter"},
- {KB_F1 ,"KB_F1"},
- {KB_F2 ,"KB_F2"},
- {KB_F3 ,"KB_F3"},
- {KB_F4 ,"KB_F4"},
- {KB_F5 ,"KB_F5"},
- {KB_F6 ,"KB_F6"},
- {KB_F7 ,"KB_F7"},
- {KB_F8 ,"KB_F8"},
- {KB_F9 ,"KB_F9"},
- {KB_F10 ,"KB_F10"},
- {KB_F11 ,"KB_F11"},
- {KB_F12 ,"KB_F12"},
- {KB_left ,"KB_left"},
- {KB_right ,"KB_right"},
- {KB_up ,"KB_up"},
- {KB_down ,"KB_down"},
- {KB_insert ,"KB_insert"},
- {KB_delete ,"KB_delete"},
- {KB_home ,"KB_home"},
- {KB_end ,"KB_end"},
- {KB_pageUp ,"KB_pageUp"},
- {KB_pageDown ,"KB_pageDown"},
- {KB_capsLock ,"KB_capsLock"},
- {KB_numLock ,"KB_numLock"},
- {KB_scrollLock ,"KB_scrollLock"},
- {KB_leftShift ,"KB_leftShift"},
- {KB_rightShift ,"KB_rightShift"},
- {KB_leftCtrl ,"KB_leftCtrl"},
- {KB_rightCtrl ,"KB_rightCtrl"},
- {KB_leftAlt ,"KB_leftAlt"},
- {KB_rightAlt ,"KB_rightAlt"},
- {KB_leftWindows ,"KB_leftWindows"},
- {KB_rightWindows ,"KB_rightWindows"},
- {KB_menu ,"KB_menu"},
- {KB_sysReq ,"KB_sysReq"},
- {KB_esc ,"KB_esc"},
- {KB_1 ,"KB_1"},
- {KB_2 ,"KB_2"},
- {KB_3 ,"KB_3"},
- {KB_4 ,"KB_4"},
- {KB_5 ,"KB_5"},
- {KB_6 ,"KB_6"},
- {KB_7 ,"KB_7"},
- {KB_8 ,"KB_8"},
- {KB_9 ,"KB_9"},
- {KB_0 ,"KB_0"},
- {KB_minus ,"KB_minus"},
- {KB_equals ,"KB_equals"},
- {KB_backSlash ,"KB_backSlash"},
- {KB_backspace ,"KB_backspace"},
- {KB_tab ,"KB_tab"},
- {KB_Q ,"KB_Q"},
- {KB_W ,"KB_W"},
- {KB_E ,"KB_E"},
- {KB_R ,"KB_R"},
- {KB_T ,"KB_T"},
- {KB_Y ,"KB_Y"},
- {KB_U ,"KB_U"},
- {KB_I ,"KB_I"},
- {KB_O ,"KB_O"},
- {KB_P ,"KB_P"},
- {KB_leftSquareBrace ,"KB_leftSquareBrace"},
- {KB_rightSquareBrace ,"KB_rightSquareBrace"},
- {KB_enter ,"KB_enter"},
- {KB_A ,"KB_A"},
- {KB_S ,"KB_S"},
- {KB_D ,"KB_D"},
- {KB_F ,"KB_F"},
- {KB_G ,"KB_G"},
- {KB_H ,"KB_H"},
- {KB_J ,"KB_J"},
- {KB_K ,"KB_K"},
- {KB_L ,"KB_L"},
- {KB_semicolon ,"KB_semicolon"},
- {KB_apostrophe ,"KB_apostrophe"},
- {KB_Z ,"KB_Z"},
- {KB_X ,"KB_X"},
- {KB_C ,"KB_C"},
- {KB_V ,"KB_V"},
- {KB_B ,"KB_B"},
- {KB_N ,"KB_N"},
- {KB_M ,"KB_M"},
- {KB_comma ,"KB_comma"},
- {KB_period ,"KB_period"},
- {KB_divide ,"KB_divide"},
- {KB_space ,"KB_space"},
- {KB_tilde ,"KB_tilde"},
- {0 ,"KB_unknown"},
- };
-
-/****************************************************************************
-PARAMETERS:
-x - X coordinate of the mouse cursor position (screen coordinates)
-y - Y coordinate of the mouse cursor position (screen coordinates)
-
-REMARKS:
-This gets called periodically to move the mouse. It will get called when
-the mouse may not have actually moved, so check if it has before redrawing
-it.
-****************************************************************************/
-void EVTAPI moveMouse(
- int x,
- int y)
-{
-}
-
-/****************************************************************************
-PARAMETERS:
-code - Code to translate
-keys - Table of translation key values to look up
-
-REMARKS:
-Simple function to look up the printable name for the keyboard code.
-****************************************************************************/
-KeyEntry *FindKey(
- int code,
- KeyEntry *keys)
-{
- KeyEntry *key;
-
- for (key = keys; key->code != 0; key++) {
- if (key->code == code)
- break;
- }
- return key;
-}
-
-/****************************************************************************
-PARAMETERS:
-evt - Event to display modifiers for
-
-REMARKS:
-Function to display shift modifiers flags
-****************************************************************************/
-void DisplayModifiers(
- event_t *evt)
-{
- if (evt->modifiers & EVT_LEFTBUT)
- printf(", LBUT");
- if (evt->modifiers & EVT_RIGHTBUT)
- printf(", RBUT");
- if (evt->modifiers & EVT_MIDDLEBUT)
- printf(", MBUT");
- if (evt->modifiers & EVT_SHIFTKEY) {
- if (evt->modifiers & EVT_LEFTSHIFT)
- printf(", LSHIFT");
- if (evt->modifiers & EVT_RIGHTSHIFT)
- printf(", RSHIFT");
- }
- if (evt->modifiers & EVT_CTRLSTATE) {
- if (evt->modifiers & EVT_LEFTCTRL)
- printf(", LCTRL");
- if (evt->modifiers & EVT_RIGHTCTRL)
- printf(", RCTRL");
- }
- if (evt->modifiers & EVT_ALTSTATE) {
- if (evt->modifiers & EVT_LEFTALT)
- printf(", LALT");
- if (evt->modifiers & EVT_RIGHTALT)
- printf(", RALT");
- }
-}
-
-/****************************************************************************
-PARAMETERS:
-msg - Message to display for type of event
-evt - Event to display
-
-REMARKS:
-Function to display the status of the keyboard event to the screen.
-****************************************************************************/
-void DisplayKey(
- char *msg,
- event_t *evt)
-{
- KeyEntry *ascii,*scan;
- char ch = EVT_asciiCode(evt->message);
-
- ascii = FindKey(ch,ASCIICodes);
- scan = FindKey(EVT_scanCode(evt->message),ScanCodes);
- printf("%s: 0x%04X -> %s, %s, '%c'",
- msg, (int)evt->message & 0xFFFF, scan->name, ascii->name, isprint(ch) ? ch : ' ');
- DisplayModifiers(evt);
- printf("\n");
-}
-
-/****************************************************************************
-PARAMETERS:
-msg - Message to display for type of event
-evt - Event to display
-
-REMARKS:
-Function to display the status of the mouse event to the screen.
-****************************************************************************/
-void DisplayMouse(
- char *msg,
- event_t *evt)
-{
- printf("%s: ", msg);
- if (evt->message & EVT_LEFTBMASK)
- printf("LEFT ");
- if (evt->message & EVT_RIGHTBMASK)
- printf("RIGHT ");
- if (evt->message & EVT_MIDDLEBMASK)
- printf("MIDDLE ");
- printf("abs(%d,%d), rel(%d,%d)", evt->where_x, evt->where_y, evt->relative_x, evt->relative_y);
- DisplayModifiers(evt);
- if (evt->message & EVT_DBLCLICK)
- printf(", DBLCLICK");
- printf("\n");
-}
-
-/****************************************************************************
-PARAMETERS:
-msg - Message to display for type of event
-evt - Event to display
-
-REMARKS:
-Function to display the status of the joystick event to the screen.
-****************************************************************************/
-void DisplayJoy(
- char *msg,
- event_t *evt)
-{
- printf("%s: Joy1(%4d,%4d,%c%c), Joy2(%4d,%4d,%c%c)\n", msg,
- evt->where_x,evt->where_y,
- (evt->message & EVT_JOY1_BUTTONA) ? 'A' : 'a',
- (evt->message & EVT_JOY1_BUTTONB) ? 'B' : 'b',
- evt->relative_x,evt->relative_y,
- (evt->message & EVT_JOY2_BUTTONA) ? 'A' : 'a',
- (evt->message & EVT_JOY2_BUTTONB) ? 'B' : 'b');
-}
-
-/****************************************************************************
-REMARKS:
-Joystick calibration routine
-****************************************************************************/
-void CalibrateJoy(void)
-{
- event_t evt;
- if(EVT_joyIsPresent()){
- printf("Joystick Calibration\nMove the joystick to the upper left corner and press any button.\n");
- EVT_halt(&evt, EVT_JOYCLICK);
- EVT_halt(&evt, EVT_JOYCLICK);
- EVT_joySetUpperLeft();
- printf("Move the joystick to the lower right corner and press any button.\n");
- EVT_halt(&evt, EVT_JOYCLICK);
- EVT_halt(&evt, EVT_JOYCLICK);
- EVT_joySetLowerRight();
- printf("Move the joystick to center position and press any button.\n");
- EVT_halt(&evt, EVT_JOYCLICK);
- EVT_halt(&evt, EVT_JOYCLICK);
- EVT_joySetCenter();
- printf("Joystick calibrated\n");
- }
-}
-
-/****************************************************************************
-REMARKS:
-Main program entry point
-****************************************************************************/
-int main(void)
-{
- event_t evt;
- ibool done = false;
- PM_HWND hwndConsole;
-
- hwndConsole = PM_openConsole(0,0,0,0,0,true);
- EVT_init(&moveMouse);
- EVT_setMouseRange(1024,768);
- CalibrateJoy();
- do {
- EVT_pollJoystick();
- if (EVT_getNext(&evt,EVT_EVERYEVT)) {
- switch (evt.what) {
- case EVT_KEYDOWN:
- DisplayKey("EVT_KEYDOWN ", &evt);
- if (EVT_scanCode(evt.message) == KB_esc)
- done = true;
- break;
- case EVT_KEYREPEAT:
- DisplayKey("EVT_KEYREPEAT", &evt);
- break;
- case EVT_KEYUP:
- DisplayKey("EVT_KEYUP ", &evt);
- break;
- case EVT_MOUSEDOWN:
- DisplayMouse("EVT_MOUSEDOWN", &evt);
- break;
- case EVT_MOUSEAUTO:
- DisplayMouse("EVT_MOUSEAUTO", &evt);
- break;
- case EVT_MOUSEUP:
- DisplayMouse("EVT_MOUSEUP ", &evt);
- break;
- case EVT_MOUSEMOVE:
- DisplayMouse("EVT_MOUSEMOVE", &evt);
- break;
- case EVT_JOYCLICK:
- DisplayJoy("EVT_JOYCLICK ", &evt);
- break;
- case EVT_JOYMOVE:
- DisplayJoy("EVT_JOYMOVE ", &evt);
- break;
- }
- }
- } while (!done);
- EVT_exit();
- PM_closeConsole(hwndConsole);
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/isvesa.c b/board/MAI/bios_emulator/scitech/src/pm/tests/isvesa.c
deleted file mode 100644
index 67ad2456e8..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/isvesa.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: any
-*
-* Description: Test program to check the ability to allocate real mode
-* memory and to call real mode interrupt handlers such as
-* the VESA VBE BIOS from protected mode. Compile and link
-* with the appropriate command line for your DOS extender.
-*
-* Functions tested: PM_getVESABuf()
-* PM_mapRealPointer()
-* PM_int86x()
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include "pmapi.h"
-
-/* SuperVGA information block */
-
-#pragma pack(1)
-
-typedef struct {
- char VESASignature[4]; /* 'VESA' 4 byte signature */
- short VESAVersion; /* VBE version number */
- ulong OEMStringPtr; /* Far pointer to OEM string */
- ulong Capabilities; /* Capabilities of video card */
- ulong VideoModePtr; /* Far pointer to supported modes */
- short TotalMemory; /* Number of 64kb memory blocks */
- char reserved[236]; /* Pad to 256 byte block size */
- } VgaInfoBlock;
-
-#pragma pack()
-
-int main(void)
-{
- RMREGS regs;
- RMSREGS sregs;
- VgaInfoBlock vgaInfo;
- ushort *mode;
- uint vgLen;
- uchar *vgPtr;
- unsigned r_vgseg,r_vgoff;
-
- printf("Program running in ");
- switch (PM_getModeType()) {
- case PM_realMode:
- printf("real mode.\n\n");
- break;
- case PM_286:
- printf("16 bit protected mode.\n\n");
- break;
- case PM_386:
- printf("32 bit protected mode.\n\n");
- break;
- }
-
- /* Allocate a 256 byte block of real memory for communicating with
- * the VESA BIOS.
- */
- if ((vgPtr = PM_getVESABuf(&vgLen,&r_vgseg,&r_vgoff)) == NULL) {
- printf("Unable to allocate VESA memory buffer!\n");
- exit(1);
- }
-
- /* Call the VESA VBE to see if it is out there */
- regs.x.ax = 0x4F00;
- regs.x.di = r_vgoff;
- sregs.es = r_vgseg;
- memcpy(vgPtr,"VBE2",4);
- PM_int86x(0x10, &regs, &regs, &sregs);
- memcpy(&vgaInfo,vgPtr,sizeof(VgaInfoBlock));
- if (regs.x.ax == 0x4F && strncmp(vgaInfo.VESASignature,"VESA",4) == 0) {
- printf("VESA VBE version %d.%d BIOS detected\n\n",
- vgaInfo.VESAVersion >> 8, vgaInfo.VESAVersion & 0xF);
- printf("Available video modes:\n");
- mode = PM_mapRealPointer(vgaInfo.VideoModePtr >> 16, vgaInfo.VideoModePtr & 0xFFFF);
- while (*mode != 0xFFFF) {
- printf(" %04hXh (%08X)\n", *mode, (int)mode);
- mode++;
- }
- }
- else
- printf("VESA VBE not found\n");
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/key.c b/board/MAI/bios_emulator/scitech/src/pm/tests/key.c
deleted file mode 100644
index dba88853c2..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/key.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-*
-* Language: ANSI C
-* Environment: any
-*
-* Description: Test program to check the ability to install a C based
-* keyboard interrupt handler.
-*
-* Functions tested: PM_setKeyHandler()
-* PM_chainPrevKey()
-* PM_restoreKeyHandler()
-*
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-volatile long count = 0;
-
-#pragma off (check_stack) /* No stack checking under Watcom */
-
-void PMAPI keyHandler(void)
-{
- count++;
- PM_chainPrevKey(); /* Chain to previous handler */
-}
-
-int main(void)
-{
- int ch;
- PM_lockHandle lh;
-
- printf("Program running in ");
- switch (PM_getModeType()) {
- case PM_realMode:
- printf("real mode.\n\n");
- break;
- case PM_286:
- printf("16 bit protected mode.\n\n");
- break;
- case PM_386:
- printf("32 bit protected mode.\n\n");
- break;
- }
-
- /* Install our timer handler and lock handler pages in memory. It is
- * difficult to get the size of a function in C, but we know our
- * function is well less than 100 bytes (and an entire 4k page will
- * need to be locked by the server anyway).
- */
- PM_lockCodePages((__codePtr)keyHandler,100,&lh);
- PM_lockDataPages((void*)&count,sizeof(count),&lh);
- PM_installBreakHandler(); /* We *DONT* want Ctrl-Breaks! */
- PM_setKeyHandler(keyHandler);
- printf("Keyboard interrupt handler installed - Type some characters and\n");
- printf("hit ESC to exit\n");
- while ((ch = PM_getch()) != 0x1B) {
- printf("%c", ch);
- fflush(stdout);
- }
-
- PM_restoreKeyHandler();
- PM_restoreBreakHandler();
- PM_unlockDataPages((void*)&count,sizeof(count),&lh);
- PM_unlockCodePages((__codePtr)keyHandler,100,&lh);
- printf("\n\nKeyboard handler was called %ld times\n", count);
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/key15.c b/board/MAI/bios_emulator/scitech/src/pm/tests/key15.c
deleted file mode 100644
index b0b94be9c2..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/key15.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-*
-* Language: ANSI C
-* Environment: any
-*
-* Description: Test program to check the ability to install a C based
-* keyboard Int 15h interrupt handler. This is an alternate
-* way to intercept scancodes from the keyboard by hooking
-* the Int 15h keyboard intercept callout.
-*
-* Functions tested: PM_setKey15Handler()
-* PM_restoreKey15Handler()
-*
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-volatile long count = 0;
-volatile short lastScanCode = 0;
-
-#pragma off (check_stack) /* No stack checking under Watcom */
-
-short PMAPI keyHandler(short scanCode)
-{
- count++;
- lastScanCode = scanCode;
- return scanCode; /* Let BIOS process as normal */
-}
-
-int main(void)
-{
- int ch;
- PM_lockHandle lh;
-
- printf("Program running in ");
- switch (PM_getModeType()) {
- case PM_realMode:
- printf("real mode.\n\n");
- break;
- case PM_286:
- printf("16 bit protected mode.\n\n");
- break;
- case PM_386:
- printf("32 bit protected mode.\n\n");
- break;
- }
-
- /* Install our timer handler and lock handler pages in memory. It is
- * difficult to get the size of a function in C, but we know our
- * function is well less than 100 bytes (and an entire 4k page will
- * need to be locked by the server anyway).
- */
- PM_lockCodePages((__codePtr)keyHandler,100,&lh);
- PM_lockDataPages((void*)&count,sizeof(count),&lh);
- PM_installBreakHandler(); /* We *DONT* want Ctrl-Break's! */
- PM_setKey15Handler(keyHandler);
- printf("Keyboard interrupt handler installed - Type some characters and\n");
- printf("hit ESC to exit\n");
- while ((ch = PM_getch()) != 0x1B) {
- printf("%c", ch);
- fflush(stdout);
- }
-
- PM_restoreKey15Handler();
- PM_restoreBreakHandler();
- PM_unlockDataPages((void*)&count,sizeof(count),&lh);
- PM_unlockCodePages((__codePtr)keyHandler,100,&lh);
- printf("\n\nKeyboard handler was called %ld times\n", count);
- printf("Last scan code %04X\n", lastScanCode);
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/memtest.c b/board/MAI/bios_emulator/scitech/src/pm/tests/memtest.c
deleted file mode 100644
index a2c655b4a3..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/memtest.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-*
-* Language: ANSI C
-* Environment: any
-*
-* Description: Test program to determine just how much memory can be
-* allocated with the compiler in use. Compile and link
-* with the appropriate command line for your DOS extender.
-*
-* Functions tested: PM_malloc()
-* PM_availableMemory()
-*
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <math.h>
-#include "pmapi.h"
-
-#ifdef __16BIT__
-#define MAXALLOC 64
-#else
-#define MAXALLOC 2000
-#endif
-
-int main(void)
-{
- int i;
- ulong allocs;
- ulong physical,total;
- char *p,*pa[MAXALLOC];
-
- printf("Program running in ");
- switch (PM_getModeType()) {
- case PM_realMode:
- printf("real mode.\n\n");
- break;
- case PM_286:
- printf("16 bit protected mode.\n\n");
- break;
- case PM_386:
- printf("32 bit protected mode.\n\n");
- break;
- }
-
- printf("Memory available at start:\n");
- PM_availableMemory(&physical,&total);
- printf(" Physical memory: %ld Kb\n", physical / 1024);
- printf(" Total (including virtual): %ld Kb\n", total / 1024);
- printf("\n");
- for (allocs = i = 0; i < MAXALLOC; i++) {
- if ((pa[i] = PM_malloc(10*1024)) != 0) { /* in 10k blocks */
- p = pa[allocs];
- memset(p, 0, 10*1024); /* touch every byte */
- *p = 'x'; /* do something, anything with */
- p[1023] = 'y'; /* the allocated memory */
- allocs++;
- printf("Allocated %lu bytes\r", 10*(allocs << 10));
- }
- else break;
- if (PM_kbhit() && (PM_getch() == 0x1B))
- break;
- }
-
- printf("\n\nAllocated total of %lu bytes\n", 10 * (allocs << 10));
-
- printf("\nMemory available at end:\n");
- PM_availableMemory(&physical,&total);
- printf(" Physical memory: %ld Kb\n", physical / 1024);
- printf(" Total (including virtual): %ld Kb\n", total / 1024);
-
- for (i = allocs-1; i >= 0; i--)
- PM_free(pa[i]);
-
- printf("\nMemory available after freeing all blocks (note that under protected mode\n");
- printf("this will most likely not be correct after freeing blocks):\n\n");
- PM_availableMemory(&physical,&total);
- printf(" Physical memory: %ld Kb\n", physical / 1024);
- printf(" Total (including virtual): %ld Kb\n", total / 1024);
-
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/mouse.c b/board/MAI/bios_emulator/scitech/src/pm/tests/mouse.c
deleted file mode 100644
index 2765a0d1cc..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/mouse.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-*
-* Language: ANSI C
-* Environment: any
-*
-* Description: Test program to check the ability to install an assembly
-* language mouse interrupt handler. We use assembly language
-* as it must be a far function and should swap to a local
-* 32 bit stack if it is going to call any C based code (which
-* we do in this example).
-*
-* Functions tested: PM_installMouseHandler()
-* PM_int86()
-*
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-volatile long count = 0;
-
-#pragma off (check_stack) /* No stack checking under Watcom */
-
-void PMAPI mouseHandler(
- uint mask,
- uint butstate,
- int x,
- int y,
- int mickeyX,
- int mickeyY)
-{
- mask = mask; /* We dont use any of the parameters */
- butstate = butstate;
- x = x;
- y = y;
- mickeyX = mickeyX;
- mickeyY = mickeyY;
- count++;
-}
-
-int main(void)
-{
- RMREGS regs;
- PM_lockHandle lh;
-
- printf("Program running in ");
- switch (PM_getModeType()) {
- case PM_realMode:
- printf("real mode.\n\n");
- break;
- case PM_286:
- printf("16 bit protected mode.\n\n");
- break;
- case PM_386:
- printf("32 bit protected mode.\n\n");
- break;
- }
-
- regs.x.ax = 33; /* Mouse function 33 - Software reset */
- PM_int86(0x33,&regs,&regs);
- if (regs.x.bx == 0) {
- printf("No mouse installed.\n");
- exit(1);
- }
-
- /* Install our mouse handler and lock handler pages in memory. It is
- * difficult to get the size of a function in C, but we know our
- * function is well less than 100 bytes (and an entire 4k page will
- * need to be locked by the server anyway).
- */
- PM_lockCodePages((__codePtr)mouseHandler,100,&lh);
- PM_lockDataPages((void*)&count,sizeof(count),&lh);
- if (!PM_setMouseHandler(0xFFFF, mouseHandler)) {
- printf("Unable to install mouse handler!\n");
- exit(1);
- }
- printf("Mouse handler installed - Hit any key to exit\n");
- PM_getch();
-
- PM_restoreMouseHandler();
- PM_unlockDataPages((void*)&count,sizeof(count),&lh);
- PM_unlockCodePages((__codePtr)mouseHandler,100,&lh);
- printf("Mouse handler was called %ld times\n", count);
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/restore.c b/board/MAI/bios_emulator/scitech/src/pm/tests/restore.c
deleted file mode 100644
index e00be750e3..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/restore.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Linux/QNX
-*
-* Description: Program to restore the console state state from a previously
-* saved state if the program crashed while the console
-* was in graphics mode.
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-void setVideoMode(int mode)
-{
- RMREGS r;
-
- r.x.ax = mode;
- PM_int86(0x10, &r, &r);
-}
-
-int main(void)
-{
- PM_HWND hwndConsole;
- ulong stateSize;
- void *stateBuf;
- FILE *f;
-
- /* Write the saved console state buffer to disk */
- if ((f = fopen("/etc/pmsave.dat","rb")) == NULL) {
- printf("Unable to open /etc/pmsave.dat for reading!\n");
- return -1;
- }
- fread(&stateSize,1,sizeof(stateSize),f);
- if (stateSize != PM_getConsoleStateSize()) {
- printf("Size mismatch in /etc/pmsave.dat!\n");
- return -1;
- }
- if ((stateBuf = PM_malloc(stateSize)) == NULL) {
- printf("Unable to allocate console state buffer!\n");
- return -1;
- }
- fread(stateBuf,1,stateSize,f);
- fclose(f);
-
- /* Open the console */
- hwndConsole = PM_openConsole(0,0,0,0,0,true);
-
- /* Forcibly set 80x25 text mode using the BIOS */
- setVideoMode(0x3);
-
- /* Restore the previous console state */
- PM_restoreConsoleState(stateBuf,0);
- PM_closeConsole(hwndConsole);
- PM_free(stateBuf);
- printf("Console state successfully restored from /etc/pmsave.dat\n");
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/rtc.c b/board/MAI/bios_emulator/scitech/src/pm/tests/rtc.c
deleted file mode 100644
index acef9226a8..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/rtc.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: any
-*
-* Description: Test program to check the ability to install a C based
-* Real Time Clock interrupt handler.
-*
-* Functions tested: PM_setRealTimeClockHandler()
-* PM_restoreRealTimeClockHandler()
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-volatile long count = 0;
-
-#pragma off (check_stack) /* No stack checking under Watcom */
-
-void PMAPI RTCHandler(void)
-{
- count++;
-}
-
-int main(void)
-{
- long oldCount;
- PM_lockHandle lh;
-
- printf("Program running in ");
- switch (PM_getModeType()) {
- case PM_realMode:
- printf("real mode.\n\n");
- break;
- case PM_286:
- printf("16 bit protected mode.\n\n");
- break;
- case PM_386:
- printf("32 bit protected mode.\n\n");
- break;
- }
-
- /* Install our timer handler and lock handler pages in memory. It is
- * difficult to get the size of a function in C, but we know our
- * function is well less than 100 bytes (and an entire 4k page will
- * need to be locked by the server anyway).
- */
- PM_lockCodePages((__codePtr)RTCHandler,100,&lh);
- PM_lockDataPages((void*)&count,sizeof(count),&lh);
- PM_installBreakHandler(); /* We *DONT* want Ctrl-Breaks! */
- PM_setRealTimeClockHandler(RTCHandler,128);
- printf("RealTimeClock interrupt handler installed - Hit ESC to exit\n");
- oldCount = count;
- while (1) {
- if (PM_kbhit() && (PM_getch() == 0x1B))
- break;
- if (count != oldCount) {
- printf("Tick, Tock: %ld\n", count);
- oldCount = count;
- }
- }
-
- PM_restoreRealTimeClockHandler();
- PM_restoreBreakHandler();
- PM_unlockDataPages((void*)&count,sizeof(count),&lh);
- PM_unlockCodePages((__codePtr)RTCHandler,100,&lh);
- printf("RealTimeClock handler was called %ld times\n", count);
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/save.c b/board/MAI/bios_emulator/scitech/src/pm/tests/save.c
deleted file mode 100644
index f7324562f8..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/save.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Linux/QNX
-*
-* Description: Program to save the console state state so that it can
-* be later restored if the program crashed while the console
-* was in graphics mode.
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-int main(void)
-{
- PM_HWND hwndConsole;
- ulong stateSize;
- void *stateBuf;
- FILE *f;
-
- /* Allocate a buffer to save console state and save the state */
- hwndConsole = PM_openConsole(0,0,0,0,0,true);
- stateSize = PM_getConsoleStateSize();
- if ((stateBuf = PM_malloc(stateSize)) == NULL) {
- PM_closeConsole(hwndConsole);
- printf("Unable to allocate console state buffer!\n");
- return -1;
- }
- PM_saveConsoleState(stateBuf,0);
-
- /* Restore the console state on exit */
- PM_restoreConsoleState(stateBuf,0);
- PM_closeConsole(hwndConsole);
-
- /* Write the saved console state buffer to disk */
- if ((f = fopen("/etc/pmsave.dat","wb")) == NULL)
- printf("Unable to open /etc/pmsave/dat for writing!\n");
- else {
- fwrite(&stateSize,1,sizeof(stateSize),f);
- fwrite(stateBuf,1,stateSize,f);
- fclose(f);
- printf("Console state successfully saved to /etc/pmsave.dat\n");
- }
- PM_free(stateBuf);
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/showpci.c b/board/MAI/bios_emulator/scitech/src/pm/tests/showpci.c
deleted file mode 100644
index be275e1a04..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/showpci.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: any
-*
-* Description: Test program to test the PCI library functions.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "pcilib.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <stdarg.h>
-
-/*------------------------- Global Variables ------------------------------*/
-
-static int NumPCI = -1;
-static PCIDeviceInfo *PCI;
-static int *BridgeIndex;
-static int *DeviceIndex;
-static int NumBridges;
-static PCIDeviceInfo *AGPBridge = NULL;
-static int NumDevices;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-REMARKS:
-Enumerates the PCI bus and dumps the PCI configuration information to the
-log file.
-****************************************************************************/
-static void EnumeratePCI(void)
-{
- int i,index;
- PCIDeviceInfo *info;
-
- printf("Displaying enumeration of PCI bus (%d devices, %d display devices)\n",
- NumPCI, NumDevices);
- for (index = 0; index < NumDevices; index++)
- printf(" Display device %d is PCI device %d\n",index,DeviceIndex[index]);
- printf("\n");
- printf("Bus Slot Fnc DeviceID SubSystem Rev Class IRQ Int Cmd\n");
- for (i = 0; i < NumPCI; i++) {
- printf("%2d %2d %2d %04X:%04X %04X:%04X %02X %02X:%02X %02X %02X %04X ",
- PCI[i].slot.p.Bus,
- PCI[i].slot.p.Device,
- PCI[i].slot.p.Function,
- PCI[i].VendorID,
- PCI[i].DeviceID,
- PCI[i].u.type0.SubSystemVendorID,
- PCI[i].u.type0.SubSystemID,
- PCI[i].RevID,
- PCI[i].BaseClass,
- PCI[i].SubClass,
- PCI[i].u.type0.InterruptLine,
- PCI[i].u.type0.InterruptPin,
- PCI[i].Command);
- for (index = 0; index < NumDevices; index++) {
- if (DeviceIndex[index] == i)
- break;
- }
- if (index < NumDevices)
- printf("<- %d\n", index);
- else
- printf("\n");
- }
- printf("\n");
- printf("DeviceID Stat Ifc Cch Lat Hdr BIST\n");
- for (i = 0; i < NumPCI; i++) {
- printf("%04X:%04X %04X %02X %02X %02X %02X %02X ",
- PCI[i].VendorID,
- PCI[i].DeviceID,
- PCI[i].Status,
- PCI[i].Interface,
- PCI[i].CacheLineSize,
- PCI[i].LatencyTimer,
- PCI[i].HeaderType,
- PCI[i].BIST);
- for (index = 0; index < NumDevices; index++) {
- if (DeviceIndex[index] == i)
- break;
- }
- if (index < NumDevices)
- printf("<- %d\n", index);
- else
- printf("\n");
- }
- printf("\n");
- printf("DeviceID Base10h Base14h Base18h Base1Ch Base20h Base24h ROMBase\n");
- for (i = 0; i < NumPCI; i++) {
- printf("%04X:%04X %08lX %08lX %08lX %08lX %08lX %08lX %08lX ",
- PCI[i].VendorID,
- PCI[i].DeviceID,
- PCI[i].u.type0.BaseAddress10,
- PCI[i].u.type0.BaseAddress14,
- PCI[i].u.type0.BaseAddress18,
- PCI[i].u.type0.BaseAddress1C,
- PCI[i].u.type0.BaseAddress20,
- PCI[i].u.type0.BaseAddress24,
- PCI[i].u.type0.ROMBaseAddress);
- for (index = 0; index < NumDevices; index++) {
- if (DeviceIndex[index] == i)
- break;
- }
- if (index < NumDevices)
- printf("<- %d\n", index);
- else
- printf("\n");
- }
- printf("\n");
- printf("DeviceID BAR10Len BAR14Len BAR18Len BAR1CLen BAR20Len BAR24Len ROMLen\n");
- for (i = 0; i < NumPCI; i++) {
- printf("%04X:%04X %08lX %08lX %08lX %08lX %08lX %08lX %08lX ",
- PCI[i].VendorID,
- PCI[i].DeviceID,
- PCI[i].u.type0.BaseAddress10Len,
- PCI[i].u.type0.BaseAddress14Len,
- PCI[i].u.type0.BaseAddress18Len,
- PCI[i].u.type0.BaseAddress1CLen,
- PCI[i].u.type0.BaseAddress20Len,
- PCI[i].u.type0.BaseAddress24Len,
- PCI[i].u.type0.ROMBaseAddressLen);
- for (index = 0; index < NumDevices; index++) {
- if (DeviceIndex[index] == i)
- break;
- }
- if (index < NumDevices)
- printf("<- %d\n", index);
- else
- printf("\n");
- }
- printf("\n");
- printf("Displaying enumeration of %d bridge devices\n",NumBridges);
- printf("\n");
- printf("DeviceID P# S# B# IOB IOL MemBase MemLimit PreBase PreLimit Ctrl\n");
- for (i = 0; i < NumBridges; i++) {
- info = (PCIDeviceInfo*)&PCI[BridgeIndex[i]];
- printf("%04X:%04X %02X %02X %02X %04X %04X %08X %08X %08X %08X %04X\n",
- info->VendorID,
- info->DeviceID,
- info->u.type1.PrimaryBusNumber,
- info->u.type1.SecondayBusNumber,
- info->u.type1.SubordinateBusNumber,
- ((u16)info->u.type1.IOBase << 8) & 0xF000,
- info->u.type1.IOLimit ?
- ((u16)info->u.type1.IOLimit << 8) | 0xFFF : 0,
- ((u32)info->u.type1.MemoryBase << 16) & 0xFFF00000,
- info->u.type1.MemoryLimit ?
- ((u32)info->u.type1.MemoryLimit << 16) | 0xFFFFF : 0,
- ((u32)info->u.type1.PrefetchableMemoryBase << 16) & 0xFFF00000,
- info->u.type1.PrefetchableMemoryLimit ?
- ((u32)info->u.type1.PrefetchableMemoryLimit << 16) | 0xFFFFF : 0,
- info->u.type1.BridgeControl);
- }
- printf("\n");
-}
-
-/****************************************************************************
-RETURNS:
-Number of display devices found.
-
-REMARKS:
-This function enumerates the number of available display devices on the
-PCI bus, and returns the number found.
-****************************************************************************/
-static int PCI_enumerateDevices(void)
-{
- int i,j;
- PCIDeviceInfo *info;
-
- /* If this is the first time we have been called, enumerate all */
- /* devices on the PCI bus. */
- if (NumPCI == -1) {
- if ((NumPCI = PCI_getNumDevices()) == 0)
- return -1;
- PCI = malloc(NumPCI * sizeof(PCI[0]));
- BridgeIndex = malloc(NumPCI * sizeof(BridgeIndex[0]));
- DeviceIndex = malloc(NumPCI * sizeof(DeviceIndex[0]));
- if (!PCI || !BridgeIndex || !DeviceIndex)
- return -1;
- for (i = 0; i < NumPCI; i++)
- PCI[i].dwSize = sizeof(PCI[i]);
- if (PCI_enumerate(PCI) == 0)
- return -1;
-
- /* Build a list of all PCI bridge devices */
- for (i = 0,NumBridges = 0,BridgeIndex[0] = -1; i < NumPCI; i++) {
- if (PCI[i].BaseClass == PCI_BRIDGE_CLASS)
- BridgeIndex[NumBridges++] = i;
- }
-
- /* Now build a list of all display class devices */
- for (i = 0,NumDevices = 1,DeviceIndex[0] = -1; i < NumPCI; i++) {
- if (PCI_IS_DISPLAY_CLASS(&PCI[i])) {
- if ((PCI[i].Command & 0x3) == 0x3)
- DeviceIndex[0] = i;
- else
- DeviceIndex[NumDevices++] = i;
- if (PCI[i].slot.p.Bus != 0) {
- /* This device is on a different bus than the primary */
- /* PCI bus, so it is probably an AGP device. Find the */
- /* AGP bus device that controls that bus so we can */
- /* control it. */
- for (j = 0; j < NumBridges; j++) {
- info = (PCIDeviceInfo*)&PCI[BridgeIndex[j]];
- if (info->u.type1.SecondayBusNumber == PCI[i].slot.p.Bus) {
- AGPBridge = info;
- break;
- }
- }
- }
- }
- }
-
- /* Enumerate all PCI and bridge devices to standard output */
- EnumeratePCI();
- }
- return NumDevices;
-}
-
-int main(void)
-{
- /* Enumerate all PCI devices */
- PM_init();
- if (PCI_enumerateDevices() < 1) {
- printf("No PCI display devices found!\n");
- return -1;
- }
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/tick.c b/board/MAI/bios_emulator/scitech/src/pm/tests/tick.c
deleted file mode 100644
index 378725ebe6..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/tick.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: any
-*
-* Description: Test program to check the ability to install a C based
-* timer interrupt handler.
-*
-* Functions tested: PM_setTimerHandler()
-* PM_chainPrevTimer();
-* PM_restoreTimerHandler()
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-volatile long count = 0;
-
-#pragma off (check_stack) /* No stack checking under Watcom */
-
-void PMAPI timerHandler(void)
-{
- PM_chainPrevTimer(); /* Chain to previous handler */
- count++;
-}
-
-int main(void)
-{
- long oldCount;
- PM_lockHandle lh;
-
- printf("Program running in ");
- switch (PM_getModeType()) {
- case PM_realMode:
- printf("real mode.\n\n");
- break;
- case PM_286:
- printf("16 bit protected mode.\n\n");
- break;
- case PM_386:
- printf("32 bit protected mode.\n\n");
- break;
- }
-
- /* Install our timer handler and lock handler pages in memory. It is
- * difficult to get the size of a function in C, but we know our
- * function is well less than 100 bytes (and an entire 4k page will
- * need to be locked by the server anyway).
- */
- PM_lockCodePages((__codePtr)timerHandler,100,&lh);
- PM_lockDataPages((void*)&count,sizeof(count),&lh);
- PM_installBreakHandler(); /* We *DONT* want Ctrl-Breaks! */
- PM_setTimerHandler(timerHandler);
- printf("Timer interrupt handler installed - Hit ESC to exit\n");
- oldCount = count;
- while (1) {
- if (PM_kbhit() && (PM_getch() == 0x1B))
- break;
- if (count != oldCount) {
- printf("Tick, Tock: %ld\n", count);
- oldCount = count;
- }
- }
-
- PM_restoreTimerHandler();
- PM_restoreBreakHandler();
- PM_unlockDataPages((void*)&count,sizeof(count),&lh);
- PM_unlockCodePages((__codePtr)timerHandler,100,&lh);
- printf("Timer handler was called %ld times\n", count);
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/timerc.c b/board/MAI/bios_emulator/scitech/src/pm/tests/timerc.c
deleted file mode 100644
index 7fa77b77b8..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/timerc.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Test program for the Zen Timer Library.
-*
-****************************************************************************/
-
-#include <stdio.h>
-#include "pmapi.h"
-#include "ztimer.h"
-
-#define DELAY_SECS 10
-
-/*-------------------------- Implementation -------------------------------*/
-
-/* The following routine takes a long count in microseconds and outputs
- * a string representing the count in seconds. It could be modified to
- * return a pointer to a static string representing the count rather
- * than printing it out.
- */
-
-void ReportTime(ulong count)
-{
- ulong secs;
-
- secs = count / 1000000L;
- count = count - secs * 1000000L;
- printf("Time taken: %lu.%06lu seconds\n",secs,count);
-}
-
-int i,j; /* NON register variables! */
-
-int main(void)
-{
-#ifdef LONG_TEST
- ulong start,finish;
-#endif
-
- printf("Processor type: %d %ld MHz\n", CPU_getProcessorType(), CPU_getProcessorSpeed(true));
-
- ZTimerInit();
-
- /* Test the long period Zen Timer (we don't check for overflow coz
- * it would take tooooo long!)
- */
-
- LZTimerOn();
- for (j = 0; j < 10; j++)
- for (i = 0; i < 20000; i++)
- i = i;
- LZTimerOff();
- ReportTime(LZTimerCount());
-
- /* Test the ultra long period Zen Timer */
-#ifdef LONG_TEST
- start = ULZReadTime();
- delay(DELAY_SECS * 1000);
- finish = ULZReadTime();
- printf("Delay of %d secs took %d 1/10ths of a second\n",
- DELAY_SECS,ULZElapsedTime(start,finish));
-#endif
-
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/timercpp.cpp b/board/MAI/bios_emulator/scitech/src/pm/tests/timercpp.cpp
deleted file mode 100644
index 1258a4bb10..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/timercpp.cpp
+++ /dev/null
@@ -1,107 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: C++ 3.0
-* Environment: Any
-*
-* Description: Test program for the Zen Timer Library C++ interface.
-*
-****************************************************************************/
-
-#include <iostream.h>
-#include "pmapi.h"
-#include "ztimer.h"
-
-/*-------------------------- Implementation -------------------------------*/
-
-int i,j,k; /* NON register variables! */
-
-void dummy() {}
-
-int main(void)
-{
- LZTimer ltimer;
- ULZTimer ultimer;
-
- ZTimerInit();
-
- /* Test the long period Zen Timer (we don't check for overflow coz
- * it would take tooooo long!)
- */
-
- cout << endl;
- ultimer.restart();
- ltimer.start();
- for (j = 0; j < 10; j++)
- for (i = 0; i < 20000; i++)
- dummy();
- ltimer.stop();
- ultimer.stop();
- cout << "LCount: " << ltimer.count() << endl;
- cout << "Time: " << ltimer << " secs\n";
- cout << "ULCount: " << ultimer.count() << endl;
- cout << "ULTime: " << ultimer << " secs\n";
-
- cout << endl << "Timing ... \n";
- ultimer.restart();
- ltimer.restart();
- for (j = 0; j < 200; j++)
- for (i = 0; i < 20000; i++)
- dummy();
- ltimer.stop();
- ultimer.stop();
- cout << "LCount: " << ltimer.count() << endl;
- cout << "Time: " << ltimer << " secs\n";
- cout << "ULCount: " << ultimer.count() << endl;
- cout << "ULTime: " << ultimer << " secs\n";
-
- /* Test the lap function of the long period Zen Timer */
-
- cout << endl << "Timing ... \n";
- ultimer.restart();
- ltimer.restart();
- for (j = 0; j < 20; j++) {
- for (k = 0; k < 10; k++)
- for (i = 0; i < 20000; i++)
- dummy();
- cout << "lap: " << ltimer.lap() << endl;
- }
- ltimer.stop();
- ultimer.stop();
- cout << "LCount: " << ltimer.count() << endl;
- cout << "Time: " << ltimer << " secs\n";
- cout << "ULCount: " << ultimer.count() << endl;
- cout << "ULTime: " << ultimer << " secs\n";
-
-#ifdef LONG_TEST
- /* Test the ultra long period Zen Timer */
-
- ultimer.start();
- delay(DELAY_SECS * 1000);
- ultimer.stop();
- cout << "Delay of " << DELAY_SECS << " secs took " << ultimer.count()
- << " 1/10ths of a second\n";
- cout << "Time: " << ultimer << " secs\n";
-#endif
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/uswc.c b/board/MAI/bios_emulator/scitech/src/pm/tests/uswc.c
deleted file mode 100644
index f0c7bd6311..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/uswc.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: any
-*
-* Description: Simple test program to test the write combine functions.
-*
-* Note that this program should never be used in a production
-* environment, because write combining needs to be handled
-* with more intimate knowledge of the display hardware than
-* you can obtain by simply examining the PCI configuration
-* space.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "pcilib.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <stdarg.h>
-
-/*------------------------- Global Variables ------------------------------*/
-
-static int NumPCI = -1;
-static PCIDeviceInfo *PCI;
-static int *BridgeIndex;
-static int *DeviceIndex;
-static int NumBridges;
-static PCIDeviceInfo *AGPBridge = NULL;
-static int NumDevices;
-
-/*-------------------------- Implementation -------------------------------*/
-
-/****************************************************************************
-RETURNS:
-Number of display devices found.
-
-REMARKS:
-This function enumerates the number of available display devices on the
-PCI bus, and returns the number found.
-****************************************************************************/
-static int PCI_enumerateDevices(void)
-{
- int i,j;
- PCIDeviceInfo *info;
-
- /* If this is the first time we have been called, enumerate all */
- /* devices on the PCI bus. */
- if (NumPCI == -1) {
- if ((NumPCI = PCI_getNumDevices()) == 0)
- return -1;
- PCI = malloc(NumPCI * sizeof(PCI[0]));
- BridgeIndex = malloc(NumPCI * sizeof(BridgeIndex[0]));
- DeviceIndex = malloc(NumPCI * sizeof(DeviceIndex[0]));
- if (!PCI || !BridgeIndex || !DeviceIndex)
- return -1;
- for (i = 0; i < NumPCI; i++)
- PCI[i].dwSize = sizeof(PCI[i]);
- if (PCI_enumerate(PCI) == 0)
- return -1;
-
- /* Build a list of all PCI bridge devices */
- for (i = 0,NumBridges = 0,BridgeIndex[0] = -1; i < NumPCI; i++) {
- if (PCI[i].BaseClass == PCI_BRIDGE_CLASS)
- BridgeIndex[NumBridges++] = i;
- }
-
- /* Now build a list of all display class devices */
- for (i = 0,NumDevices = 1,DeviceIndex[0] = -1; i < NumPCI; i++) {
- if (PCI_IS_DISPLAY_CLASS(&PCI[i])) {
- if ((PCI[i].Command & 0x3) == 0x3)
- DeviceIndex[0] = i;
- else
- DeviceIndex[NumDevices++] = i;
- if (PCI[i].slot.p.Bus != 0) {
- /* This device is on a different bus than the primary */
- /* PCI bus, so it is probably an AGP device. Find the */
- /* AGP bus device that controls that bus so we can */
- /* control it. */
- for (j = 0; j < NumBridges; j++) {
- info = (PCIDeviceInfo*)&PCI[BridgeIndex[j]];
- if (info->u.type1.SecondayBusNumber == PCI[i].slot.p.Bus) {
- AGPBridge = info;
- break;
- }
- }
- }
- }
- }
- }
- return NumDevices;
-}
-
-/****************************************************************************
-REMARKS:
-Enumerates useful information about attached display devices.
-****************************************************************************/
-static void ShowDisplayDevices(void)
-{
- int i,index;
-
- printf("Displaying enumeration of %d PCI display devices\n", NumDevices);
- printf("\n");
- printf("DeviceID SubSystem Base10h (length ) Base14h (length )\n");
- for (index = 0; index < NumDevices; index++) {
- i = DeviceIndex[index];
- printf("%04X:%04X %04X:%04X %08lX (%6ld KB) %08lX (%6ld KB)\n",
- PCI[i].VendorID,
- PCI[i].DeviceID,
- PCI[i].u.type0.SubSystemVendorID,
- PCI[i].u.type0.SubSystemID,
- PCI[i].u.type0.BaseAddress10,
- PCI[i].u.type0.BaseAddress10Len / 1024,
- PCI[i].u.type0.BaseAddress14,
- PCI[i].u.type0.BaseAddress14Len / 1024);
- }
- printf("\n");
-}
-
-/****************************************************************************
-REMARKS:
-Dumps the value for a write combine region to the display.
-****************************************************************************/
-static char *DecodeWCType(
- uint type)
-{
- static char *names[] = {
- "UNCACHABLE",
- "WRCOMB",
- "UNKNOWN",
- "UNKNOWN",
- "WRTHROUGH",
- "WRPROT",
- "WRBACK",
- };
- if (type <= PM_MTRR_MAX)
- return names[type];
- return "UNKNOWN";
-}
-
-/****************************************************************************
-REMARKS:
-Dumps the value for a write combine region to the display.
-****************************************************************************/
-static void PMAPI EnumWriteCombine(
- ulong base,
- ulong length,
- uint type)
-{
- printf("%08lX %-10ld %s\n", base, length / 1024, DecodeWCType(type));
-}
-
-/****************************************************************************
-PARAMETERS:
-err - Error to log
-
-REMARKS:
-Function to log an error message if the MTRR write combining attempt failed.
-****************************************************************************/
-static void LogMTRRError(
- int err)
-{
- if (err == PM_MTRR_ERR_OK)
- return;
- switch (err) {
- case PM_MTRR_NOT_SUPPORTED:
- printf("Failed: MTRR is not supported by host CPU\n");
- break;
- case PM_MTRR_ERR_PARAMS:
- printf("Failed: Invalid parameters passed to PM_enableWriteCombined!\n");
- break;
- case PM_MTRR_ERR_NOT_4KB_ALIGNED:
- printf("Failed: Address is not 4Kb aligned!\n");
- break;
- case PM_MTRR_ERR_BELOW_1MB:
- printf("Failed: Addresses below 1Mb cannot be write combined!\n");
- break;
- case PM_MTRR_ERR_NOT_ALIGNED:
- printf("Failed: Address is not correctly aligned for processor!\n");
- break;
- case PM_MTRR_ERR_OVERLAP:
- printf("Failed: Address overlaps an existing region!\n");
- break;
- case PM_MTRR_ERR_TYPE_MISMATCH:
- printf("Failed: Adress is contained with existing region, but type is different!\n");
- break;
- case PM_MTRR_ERR_NONE_FREE:
- printf("Failed: Out of MTRR registers!\n");
- break;
- case PM_MTRR_ERR_NOWRCOMB:
- printf("Failed: This processor does not support write combining!\n");
- break;
- case PM_MTRR_ERR_NO_OS_SUPPORT:
- printf("Failed: MTRR is not supported by host OS\n");
- break;
- default:
- printf("Failed: UNKNOWN ERROR!\n");
- break;
- }
- exit(-1);
-}
-
-/****************************************************************************
-REMARKS:
-Shows all write combine regions.
-****************************************************************************/
-static void ShowWriteCombine(void)
-{
- printf("Base Length(KB) Type\n");
- LogMTRRError(PM_enumWriteCombine(EnumWriteCombine));
- printf("\n");
-}
-
-/****************************************************************************
-REMARKS:
-Dumps the value for a write combine region to the display.
-****************************************************************************/
-static void EnableWriteCombine(void)
-{
- int i,index;
-
- for (index = 0; index < NumDevices; index++) {
- i = DeviceIndex[index];
- if (PCI[i].u.type0.BaseAddress10 & 0x8) {
- LogMTRRError(PM_enableWriteCombine(
- PCI[i].u.type0.BaseAddress10 & 0xFFFFFFF0,
- PCI[i].u.type0.BaseAddress10Len,
- PM_MTRR_WRCOMB));
- }
- if (PCI[i].u.type0.BaseAddress14 & 0x8) {
- LogMTRRError(PM_enableWriteCombine(
- PCI[i].u.type0.BaseAddress14 & 0xFFFFFFF0,
- PCI[i].u.type0.BaseAddress14Len,
- PM_MTRR_WRCOMB));
- }
- }
- printf("\n");
- ShowDisplayDevices();
- ShowWriteCombine();
-}
-
-/****************************************************************************
-REMARKS:
-Dumps the value for a write combine region to the display.
-****************************************************************************/
-static void DisableWriteCombine(void)
-{
- int i,index;
-
- for (index = 0; index < NumDevices; index++) {
- i = DeviceIndex[index];
- if (PCI[i].u.type0.BaseAddress10 & 0x8) {
- LogMTRRError(PM_enableWriteCombine(
- PCI[i].u.type0.BaseAddress10 & 0xFFFFFFF0,
- PCI[i].u.type0.BaseAddress10Len,
- PM_MTRR_UNCACHABLE));
- }
- if (PCI[i].u.type0.BaseAddress14 & 0x8) {
- LogMTRRError(PM_enableWriteCombine(
- PCI[i].u.type0.BaseAddress14 & 0xFFFFFFF0,
- PCI[i].u.type0.BaseAddress14Len,
- PM_MTRR_UNCACHABLE));
- }
- }
- printf("\n");
- ShowDisplayDevices();
- ShowWriteCombine();
-}
-
-int main(int argc,char *argv[])
-{
- PM_init();
- if (PCI_enumerateDevices() < 1) {
- printf("No PCI display devices found!\n");
- return -1;
- }
- if (argc < 2) {
- printf("usage: uswc [-show -on -off]\n\n");
- ShowDisplayDevices();
- return -1;
- }
- if (stricmp(argv[1],"-show") == 0)
- ShowWriteCombine();
- else if (stricmp(argv[1],"-on") == 0)
- EnableWriteCombine();
- else if (stricmp(argv[1],"-off") == 0)
- DisableWriteCombine();
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/vftest.c b/board/MAI/bios_emulator/scitech/src/pm/tests/vftest.c
deleted file mode 100644
index b7e3bb7846..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/vftest.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Filename: $Workfile$
-* Version: $Revision: 1.1 $
-*
-* Language: ANSI C
-* Environment: any
-*
-* Description: Test program to test the VFlat virtual framebuffer functions.
-*
-* Functions tested: VF_available()
-* VF_init()
-* VF_exit()
-*
-* $Date: 2002/10/02 15:35:21 $ $Author: hfrieden $
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-uchar code[] = {
- 0xC3, /* ret */
- };
-
-int main(void)
-{
- void *vfBuffer;
-
- printf("Program running in ");
- switch (PM_getModeType()) {
- case PM_realMode:
- printf("real mode.\n\n");
- break;
- case PM_286:
- printf("16 bit protected mode.\n\n");
- break;
- case PM_386:
- printf("32 bit protected mode.\n\n");
- break;
- }
-
- if (!VF_available()) {
- printf("Virtual Linear Framebuffer not available.\n");
- exit(1);
- }
-
- vfBuffer = VF_init(0xA0000,64,sizeof(code),code);
- if (!vfBuffer) {
- printf("Failure to initialise Virtual Linear Framebuffer!\n");
- exit(1);
- }
- VF_exit();
- printf("Virtual Linear Framebuffer set up successfully!\n");
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/tests/video.c b/board/MAI/bios_emulator/scitech/src/pm/tests/video.c
deleted file mode 100644
index 92adcddd49..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/tests/video.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: any
-*
-* Description: Test program to check the ability to generate real mode
-* interrupts and to be able to obtain direct access to the
-* video memory from protected mode. Compile and link with
-* the appropriate command line for your DOS extender.
-*
-* Functions tested: PM_getBIOSSelector()
-* PM_mapPhysicalAddr()
-* PM_int86()
-*
-****************************************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include "pmapi.h"
-
-uchar *bios; /* Pointer to BIOS data area */
-uchar *videoPtr; /* Pointer to VGA framebuffer */
-void *stateBuf; /* Console state save buffer */
-
-/* Routine to return the current video mode number */
-
-int getVideoMode(void)
-{
- return PM_getByte(bios+0x49);
-}
-
-/* Routine to set a specified video mode */
-
-void setVideoMode(int mode)
-{
- RMREGS r;
-
- r.x.ax = mode;
- PM_int86(0x10, &r, &r);
-}
-
-/* Routine to clear a rectangular region on the display by calling the
- * video BIOS.
- */
-
-void clearScreen(int startx, int starty, int endx, int endy, unsigned char attr)
-{
- RMREGS r;
-
- r.x.ax = 0x0600;
- r.h.bh = attr;
- r.h.cl = startx;
- r.h.ch = starty;
- r.h.dl = endx;
- r.h.dh = endy;
- PM_int86(0x10, &r, &r);
-}
-
-/* Routine to fill a rectangular region on the display using direct
- * video writes.
- */
-
-#define SCREEN(x,y) (videoPtr + ((y) * 160) + ((x) << 1))
-
-void fill(int startx, int starty, int endx, int endy, unsigned char c,
- unsigned char attr)
-{
- unsigned char *v;
- int x,y;
-
- for (y = starty; y <= endy; y++) {
- v = SCREEN(startx,y);
- for (x = startx; x <= endx; x++) {
- *v++ = c;
- *v++ = attr;
- }
- }
-}
-
-/* Routine to display a single character using direct video writes */
-
-void writeChar(int x, int y, unsigned char c, unsigned char attr)
-{
- unsigned char *v = SCREEN(x,y);
- *v++ = c;
- *v = attr;
-}
-
-/* Routine to draw a border around a rectangular area using direct video
- * writes.
- */
-
-static unsigned char border_chars[] = {
- 186, 205, 201, 187, 200, 188 /* double box chars */
- };
-
-void border(int startx, int starty, int endx, int endy, unsigned char attr)
-{
- unsigned char *v;
- unsigned char *b;
- int i;
-
- b = border_chars;
-
- for (i = starty+1; i < endy; i++) {
- writeChar(startx, i, *b, attr);
- writeChar(endx, i, *b, attr);
- }
- b++;
- for (i = startx+1, v = SCREEN(startx+1, starty); i < endx; i++) {
- *v++ = *b;
- *v++ = attr;
- }
- for (i = startx+1, v = SCREEN(startx+1, endy); i < endx; i++) {
- *v++ = *b;
- *v++ = attr;
- }
- b++;
- writeChar(startx, starty, *b++, attr);
- writeChar(endx, starty, *b++, attr);
- writeChar(startx, endy, *b++, attr);
- writeChar(endx, endy, *b++, attr);
-}
-
-int main(void)
-{
- int orgMode;
- PM_HWND hwndConsole;
-
- printf("Program running in ");
- switch (PM_getModeType()) {
- case PM_realMode:
- printf("real mode.\n\n");
- break;
- case PM_286:
- printf("16 bit protected mode.\n\n");
- break;
- case PM_386:
- printf("32 bit protected mode.\n\n");
- break;
- }
-
- hwndConsole = PM_openConsole(0,0,0,0,0,true);
- printf("Hit any key to start 80x25 text mode and perform some direct video output.\n");
- PM_getch();
-
- /* Allocate a buffer to save console state and save the state */
- if ((stateBuf = PM_malloc(PM_getConsoleStateSize())) == NULL) {
- printf("Unable to allocate console state buffer!\n");
- exit(1);
- }
- PM_saveConsoleState(stateBuf,0);
- bios = PM_getBIOSPointer();
- orgMode = getVideoMode();
- setVideoMode(0x3);
- if ((videoPtr = PM_mapPhysicalAddr(0xB8000,0xFFFF,true)) == NULL) {
- printf("Unable to obtain pointer to framebuffer!\n");
- exit(1);
- }
-
- /* Draw some text on the screen */
- fill(0, 0, 79, 24, 176, 0x1E);
- border(0, 0, 79, 24, 0x1F);
- PM_getch();
- clearScreen(0, 0, 79, 24, 0x7);
-
- /* Restore the console state on exit */
- PM_restoreConsoleState(stateBuf,0);
- PM_free(stateBuf);
- PM_closeConsole(hwndConsole);
-
- /* Display useful status information */
- printf("\n");
- printf("Original Video Mode = %02X\n", orgMode);
- printf("BIOS Pointer = %08X\n", (int)bios);
- printf("Video Memory = %08X\n", (int)videoPtr);
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vdd/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/vdd/cpuinfo.c
deleted file mode 100644
index 3460b72456..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vdd/cpuinfo.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit OS/2 VDD
-*
-* Description: VDD specific code for the CPU detection module.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Do nothing for VDD's
-****************************************************************************/
-#define SetMaxThreadPriority() 0
-
-/****************************************************************************
-REMARKS:
-Do nothing for VDD's
-****************************************************************************/
-#define RestoreThreadPriority(i) (void)(i)
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
- CPU_largeInteger *freq)
-{
- freq->low = 100000;
- freq->high = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-****************************************************************************/
-#define GetCounter(t) \
-{ \
- ULONG count; \
- count = VDHQuerySysValue(0, VDHGSV_MSECSBOOT); \
- (t)->low = count * 100; \
- (t)->high = 0; \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vdd/fileio.c b/board/MAI/bios_emulator/scitech/src/pm/vdd/fileio.c
deleted file mode 100644
index 93742de914..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vdd/fileio.c
+++ /dev/null
@@ -1,359 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit OS/2 VDD
-*
-* Description: C library compatible I/O functions for use within a VDD.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "vddfile.h"
-
-/*------------------------ Main Code Implementation -----------------------*/
-
-#define EOF -1
-
-/* NB: none of the file VDHs are available during the DOS session */
-/* initialzation context! */
-
-/* Macros for Open/Close APIs to allow using this module in both VDDs and */
-/* normal OS/2 applications. Unfortunately VDHRead/Write/Seek don't map to */
-/* their Dos* counterparts so cleanly. */
-#ifdef __OS2_VDD__
-#define _OS2Open VDHOpen
-#define _OS2Close VDHClose
-#else
-#define _OS2Open DosOpen
-#define _OS2Close DosClose
-#endif
-
-/****************************************************************************
-REMARKS:
-VDD implementation of the ANSI C fopen function.
-****************************************************************************/
-FILE * fopen(
- const char *filename,
- const char *mode)
-{
- FILE *f = PM_malloc(sizeof(FILE));
- long oldpos;
- ULONG rc, ulAction;
- ULONG omode, oflags;
-
- if (f != NULL) {
- f->offset = 0;
- f->text = (mode[1] == 't' || mode[2] == 't');
- f->writemode = (mode[0] == 'w') || (mode[0] == 'a');
- f->unputc = EOF;
- f->endp = f->buf + sizeof(f->buf);
- f->curp = f->startp = f->buf;
-
- if (mode[0] == 'r') {
- #ifdef __OS2_VDD__
- omode = VDHOPEN_ACCESS_READONLY | VDHOPEN_SHARE_DENYNONE;
- oflags = VDHOPEN_ACTION_OPEN_IF_EXISTS | VDHOPEN_ACTION_FAIL_IF_NEW;
- #else
- omode = OPEN_ACCESS_READONLY | OPEN_SHARE_DENYNONE;
- oflags = OPEN_ACTION_OPEN_IF_EXISTS | OPEN_ACTION_FAIL_IF_NEW;
- #endif
- }
- else if (mode[0] == 'w') {
- #ifdef __OS2_VDD__
- omode = VDHOPEN_ACCESS_WRITEONLY | VDHOPEN_SHARE_DENYWRITE;
- oflags = VDHOPEN_ACTION_REPLACE_IF_EXISTS | VDHOPEN_ACTION_CREATE_IF_NEW;
- #else
- omode = OPEN_ACCESS_WRITEONLY | OPEN_SHARE_DENYWRITE;
- oflags = OPEN_ACTION_REPLACE_IF_EXISTS | OPEN_ACTION_CREATE_IF_NEW;
- #endif
- }
- else {
- #ifdef __OS2_VDD__
- omode = VDHOPEN_ACCESS_READWRITE | VDHOPEN_SHARE_DENYWRITE;
- oflags = VDHOPEN_ACTION_OPEN_IF_EXISTS | VDHOPEN_ACTION_CREATE_IF_NEW;
- #else
- omode = OPEN_ACCESS_READWRITE | OPEN_SHARE_DENYWRITE;
- oflags = OPEN_ACTION_OPEN_IF_EXISTS | OPEN_ACTION_CREATE_IF_NEW;
- #endif
- }
- rc = _OS2Open((PSZ)filename, (PHFILE)&f->handle, &ulAction, 0, VDHOPEN_FILE_NORMAL, oflags, omode, NULL);
- if (rc != 0) {
- PM_free(f);
- return NULL;
- }
-
- #ifdef __OS2_VDD__
- f->filesize = VDHSeek((HFILE)f->handle, 0, VDHSK_END_OF_FILE);
- #else
- rc = DosSetFilePtr((HFILE)f->handle, 0, FILE_END, &f->filesize);
- #endif
-
- if (mode[0] == 'a')
- fseek(f,0,2);
- }
- return f;
-}
-
-/****************************************************************************
-REMARKS:
-VDD implementation of the ANSI C fread function. Note that unlike Windows VxDs,
-OS/2 VDDs are not limited to 64K reads or writes.
-****************************************************************************/
-size_t fread(
- void *ptr,
- size_t size,
- size_t n,
- FILE *f)
-{
- char *buf = ptr;
- int bytes,readbytes,totalbytes = 0;
-
- /* First copy any data already read into our buffer */
- if ((bytes = (f->curp - f->startp)) > 0) {
- memcpy(buf,f->curp,bytes);
- f->startp = f->curp = f->buf;
- buf += bytes;
- totalbytes += bytes;
- bytes = (size * n) - bytes;
- }
- else
- bytes = size * n;
- if (bytes) {
- #ifdef __OS2_VDD__
- readbytes = VDHRead((HFILE)f->handle, buf, bytes);
- #else
- DosRead((HFILE)f->handle, buf, bytes, &readbytes);
- #endif
- totalbytes += readbytes;
- f->offset += readbytes;
- }
- return totalbytes / size;
-}
-
-/****************************************************************************
-REMARKS:
-VDD implementation of the ANSI C fwrite function.
-****************************************************************************/
-size_t fwrite(
- void *ptr,
- size_t size,
- size_t n,
- FILE *f)
-{
- char *buf = ptr;
- int bytes,writtenbytes,totalbytes = 0;
-
- /* Flush anything already in the buffer */
- if (!f->writemode)
- return 0;
- fflush(f);
- bytes = size * n;
- #ifdef __OS2_VDD__
- writtenbytes = VDHWrite((HFILE)f->handle, buf, bytes);
- #else
- DosWrite((HFILE)f->handle, buf, bytes, &writtenbytes);
- #endif
- totalbytes += writtenbytes;
- f->offset += writtenbytes;
- if (f->offset > f->filesize)
- f->filesize = f->offset;
- return totalbytes / size;
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C fflush function.
-****************************************************************************/
-int fflush(
- FILE *f)
-{
- ULONG bytes;
-
- /* First copy any data already written into our buffer */
- if (f->writemode && (bytes = (f->curp - f->startp)) > 0) {
- #ifdef __OS2_VDD__
- bytes = VDHWrite((HFILE)f->handle, f->startp, bytes);
- #else
- DosWrite((HFILE)f->handle, f->startp, bytes, &bytes);
- #endif
- f->offset += bytes;
- if (f->offset > f->filesize)
- f->filesize = f->offset;
- f->startp = f->curp = f->buf;
- }
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-VDD implementation of the ANSI C fseek function.
-****************************************************************************/
-int fseek(
- FILE *f,
- long int offset,
- int whence)
-{
- fflush(f);
-
- if (whence == 0)
- f->offset = offset;
- else if (whence == 1)
- f->offset += offset;
- else if (whence == 2)
- f->offset = f->filesize + offset;
-
- #ifdef __OS2_VDD__
- VDHSeek((HFILE)f->handle, f->offset, VDHSK_ABSOLUTE);
- #else
- DosSetFilePtr((HFILE)f->handle, f->offset, FILE_BEGIN, NULL);
- #endif
-
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-VDD implementation of the ANSI C ftell function.
-****************************************************************************/
-long ftell(
- FILE *f)
-{
- long offset;
-
- offset = (f->curp - f->startp);
- offset += f->offset;
- return offset;
-}
-
-/****************************************************************************
-REMARKS:
-VDD implementation of the ANSI C feof function.
-****************************************************************************/
-int feof(
- FILE *f)
-{
- return (f->offset == f->filesize);
-}
-
-/****************************************************************************
-REMARKS:
-Read a single character from the input file buffer, including translation
-of the character in text transation modes.
-****************************************************************************/
-static int __getc(
- FILE *f)
-{
- int c;
-
- if (f->unputc != EOF) {
- c = f->unputc;
- f->unputc = EOF;
- }
- else {
- if (f->startp == f->curp) {
- int bytes = fread(f->buf,1,sizeof(f->buf),f);
- if (bytes == 0)
- return EOF;
- f->curp = f->startp + bytes;
- }
- c = *f->startp++;
- if (f->text && c == '\r') {
- int nc = __getc(f);
- if (nc != '\n')
- f->unputc = nc;
- }
- }
- return c;
-}
-
-/****************************************************************************
-REMARKS:
-Write a single character from to input buffer, including translation of the
-character in text transation modes.
-****************************************************************************/
-static int __putc(int c,FILE *f)
-{
- int count = 1;
- if (f->text && c == '\n') {
- __putc('\r',f);
- count = 2;
- }
- if (f->curp == f->endp)
- fflush(f);
- *f->curp++ = c;
- return count;
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C fgets function.
-****************************************************************************/
-char *fgets(
- char *s,
- int n,
- FILE *f)
-{
- int c = 0;
- char *cs;
-
- cs = s;
- while (--n > 0 && (c = __getc(f)) != EOF) {
- *cs++ = c;
- if (c == '\n')
- break;
- }
- if (c == EOF && cs == s)
- return NULL;
- *cs = '\0';
- return s;
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C fputs function.
-****************************************************************************/
-int fputs(
- const char *s,
- FILE *f)
-{
- int r = 0;
- int c;
-
- while ((c = *s++) != 0)
- r = __putc(c, f);
- return r;
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C fclose function.
-****************************************************************************/
-int fclose(
- FILE *f)
-{
- fflush(f);
- _OS2Close((HFILE)f->handle);
- PM_free(f);
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vdd/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/vdd/oshdr.h
deleted file mode 100644
index 03286bdc2e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vdd/oshdr.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit OS/2 VDD
-*
-* Description: Include file to include all OS specific header files.
-*
-****************************************************************************/
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vdd/pm.c b/board/MAI/bios_emulator/scitech/src/pm/vdd/pm.c
deleted file mode 100644
index 6688babd0d..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vdd/pm.c
+++ /dev/null
@@ -1,1050 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit OS/2 VDD
-*
-* Description: Implementation for the OS Portability Manager Library, which
-* contains functions to implement OS specific services in a
-* generic, cross platform API. Porting the OS Portability
-* Manager library is the first step to porting any SciTech
-* products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "sdd/sddhelp.h"
-#include "mtrr.h"
-
-#define TRACE(a)
-
-/*--------------------------- Global variables ----------------------------*/
-
-#define MAX_MEMORY_SHARED 100
-#define MAX_MEMORY_MAPPINGS 100
-
-/* TODO: I think the global and linear members will be the same, but not sure yet. */
-typedef struct {
- void *linear;
- ulong global;
- ulong length;
- int npages;
- } memshared;
-
-typedef struct {
- ulong physical;
- ulong linear;
- ulong length;
- int npages;
- ibool isCached;
- } mmapping;
-
-static int numMappings = 0;
-static memshared shared[MAX_MEMORY_MAPPINGS] = {0};
-static mmapping maps[MAX_MEMORY_MAPPINGS];
-ibool _PM_haveBIOS = TRUE;
-char _PM_cntPath[PM_MAX_PATH] = ""; /* there just isn't any */
-uchar *_PM_rmBufAddr = NULL;
-ushort _VARAPI PM_savedDS = 0; /* why can't I use the underscore prefix? */
-
-HVDHSEM hevFarCallRet = NULL;
-HVDHSEM hevIRet = NULL;
-HHOOK hhookUserReturnHook = NULL;
-HHOOK hhookUserIRetHook = NULL;
-
-static void (PMAPIP fatalErrorCleanup)(void) = NULL;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* Functions to read and write CMOS registers */
-
-ulong PMAPI _PM_getPDB(void);
-uchar PMAPI _PM_readCMOS(int index);
-void PMAPI _PM_writeCMOS(int index,uchar value);
-
-VOID HOOKENTRY UserReturnHook(PVOID pRefData, PCRF pcrf);
-VOID HOOKENTRY UserIRetHook(PVOID pRefData, PCRF pcrf);
-
-void PMAPI PM_init(void)
-{
- MTRR_init();
-
- /* Initialize VDD-specific data */
- /* Note: PM_init must be (obviously) called in VDM task context! */
- VDHCreateSem(&hevFarCallRet, VDH_EVENTSEM);
- VDHCreateSem(&hevIRet, VDH_EVENTSEM);
- hhookUserReturnHook = VDHAllocHook(VDH_RETURN_HOOK, (PFNARM)UserReturnHook, 0);
- hhookUserIRetHook = VDHAllocHook(VDH_RETURN_HOOK, (PFNARM)UserIRetHook, 0);
-
- if ((hevIRet == NULL) || (hevFarCallRet == NULL) ||
- (hhookUserReturnHook == NULL) || (hhookUserIRetHook == NULL)) {
- /* something failed, we can't go on */
- /* TODO: take some action here! */
- }
-}
-
-/* Do some cleaning up */
-void PMAPI PM_exit(void)
-{
- /* Note: Hooks allocated during or after VDM creation are deallocated automatically */
- if (hevIRet != NULL)
- VDHDestroySem(hevIRet);
-
- if (hevFarCallRet != NULL)
- VDHDestroySem(hevFarCallRet);
-}
-
-ibool PMAPI PM_haveBIOSAccess(void)
-{ return _PM_haveBIOS; }
-
-long PMAPI PM_getOSType(void)
-{ return /*_OS_OS2VDD*/ _OS_OS2; } /*FIX!! */
-
-int PMAPI PM_getModeType(void)
-{ return PM_386; }
-
-void PMAPI PM_backslash(char *s)
-{
- uint pos = strlen(s);
- if (s[pos-1] != '\\') {
- s[pos] = '\\';
- s[pos+1] = '\0';
- }
-}
-
-void PMAPI PM_setFatalErrorCleanup(
- void (PMAPIP cleanup)(void))
-{
- fatalErrorCleanup = cleanup;
-}
-
-void PMAPI PM_fatalError(const char *msg)
-{
- if (fatalErrorCleanup)
- fatalErrorCleanup();
-/* Fatal_Error_Handler(msg,0); TODO: implement somehow! */
-}
-
-/****************************************************************************
-PARAMETERS:
-len - Place to store the length of the buffer
-rseg - Place to store the real mode segment of the buffer
-roff - Place to store the real mode offset of the buffer
-
-REMARKS:
-This function returns the address and length of the global VESA transfer
-buffer.
-****************************************************************************/
-void * PMAPI PM_getVESABuf(
- uint *len,
- uint *rseg,
- uint *roff)
-{
- if (_PM_rmBufAddr) {
- *len = 0; /*VESA_BUF_SIZE; */
- *rseg = (ulong)(_PM_rmBufAddr) >> 4;
- *roff = (ulong)(_PM_rmBufAddr) & 0xF;
- return _PM_rmBufAddr;
- }
- return NULL;
-}
-
-int PMAPI PM_int386(int intno, PMREGS *in, PMREGS *out)
-{
- /* Unused in VDDs */
- return 0;
-}
-
-char * PMAPI PM_getCurrentPath(char *path,int maxLen)
-{
- strncpy(path, _PM_cntPath, maxLen);
- path[maxLen - 1] = 0;
- return path;
-}
-
-char PMAPI PM_getBootDrive(void)
-{
- ulong boot = 3;
- boot = VDHQuerySysValue(0, VDHGSV_BOOTDRV);
- return (char)('a' + boot - 1);
-}
-
-const char * PMAPI PM_getVBEAFPath(void)
-{
- static char path[CCHMAXPATH];
- strcpy(path,"x:\\");
- path[0] = PM_getBootDrive();
- return path;
-}
-
-const char * PMAPI PM_getNucleusPath(void)
-{
- static char path[CCHMAXPATH];
- strcpy(path,"x:\\os2\\drivers");
- path[0] = PM_getBootDrive();
- PM_backslash(path);
- strcat(path,"nucleus");
- return path;
-}
-
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
- static char path[256];
- strcpy(path,PM_getNucleusPath());
- PM_backslash(path);
- strcat(path,"config");
- return path;
-}
-
-const char * PMAPI PM_getUniqueID(void)
-{ return PM_getMachineName(); }
-
-const char * PMAPI PM_getMachineName(void)
-{
- return "Unknown";
-}
-
-int PMAPI PM_kbhit(void)
-{ return 1; }
-
-int PMAPI PM_getch(void)
-{ return 0; }
-
-PM_HWND PMAPI PM_openConsole(PM_HWND hwndUser,int device,int xRes,int yRes,int bpp,ibool fullScreen)
-{
- /* Unused in VDDs */
- return NULL;
-}
-
-int PMAPI PM_getConsoleStateSize(void)
-{
- /* Unused in VDDs */
- return 1;
-}
-
-void PMAPI PM_saveConsoleState(void *stateBuf,PM_HWND hwndConsole)
-{
- /* Unused in VDDs */
-}
-
-void PMAPI PM_setSuspendAppCallback(int (_ASMAPIP saveState)(int flags))
-{
- /* Unused in VDDs */
-}
-
-void PMAPI PM_restoreConsoleState(const void *stateBuf,PM_HWND hwndConsole)
-{
- /* Unused in VDDs */
-}
-
-void PMAPI PM_closeConsole(PM_HWND hwndConsole)
-{
- /* Unused in VDDs */
-}
-
-void PMAPI PM_setOSCursorLocation(int x,int y)
-{
- uchar *_biosPtr = PM_getBIOSPointer();
- PM_setByte(_biosPtr+0x50,x);
- PM_setByte(_biosPtr+0x51,y);
-}
-
-void PMAPI PM_setOSScreenWidth(int width,int height)
-{
- uchar *_biosPtr = PM_getBIOSPointer();
- PM_setByte(_biosPtr+0x4A,width);
- PM_setByte(_biosPtr+0x84,height-1);
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of shared memory. For OS/2 VDD we allocate shared memory
-as locked, global memory that is accessible from any memory context
-(including interrupt time context), which allows us to load our important
-data structure and code such that we can access it directly from a ring
-0 interrupt context.
-****************************************************************************/
-void * PMAPI PM_mallocShared(long size)
-{
- ULONG nPages = (size + 0xFFF) >> 12;
- int i;
-
- /* First find a free slot in our shared memory table */
- for (i = 0; i < MAX_MEMORY_SHARED; i++) {
- if (shared[i].linear == 0)
- break;
- }
- if (i < MAX_MEMORY_SHARED) {
- shared[i].linear = VDHAllocPages(NULL, nPages, VDHAP_SYSTEM | VDHAP_FIXED);
- shared[i].npages = nPages;
- shared[i].global = (ULONG)shared[i].linear;
- return (void*)shared[i].global;
- }
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of shared memory
-****************************************************************************/
-void PMAPI PM_freeShared(void *p)
-{
- int i;
-
- /* Find a shared memory block in our table and free it */
- for (i = 0; i < MAX_MEMORY_SHARED; i++) {
- if (shared[i].global == (ulong)p) {
- VDHFreePages(shared[i].linear);
- shared[i].linear = 0;
- break;
- }
- }
-}
-
-void * PMAPI PM_mapToProcess(void *base,ulong limit)
-{ return (void*)base; }
-
-ibool PMAPI PM_doBIOSPOST(
- ushort axVal,
- ulong BIOSPhysAddr,
- void *mappedBIOS,
- ulong BIOSLen)
-{
- /* TODO: Figure out how to do this */
- return false;
-}
-
-void * PMAPI PM_getBIOSPointer(void)
-{ return (void*)0x400; }
-
-void * PMAPI PM_getA0000Pointer(void)
-{ return PM_mapPhysicalAddr(0xA0000,0xFFFF,true); }
-
-/****************************************************************************
-PARAMETERS:
-base - Physical base address of the memory to maps in
-limit - Limit of physical memory to region to maps in
-
-RETURNS:
-Linear address of the newly mapped memory.
-
-REMARKS:
-Maps a physical memory range to a linear memory range.
-****************************************************************************/
-ulong MapPhysicalToLinear(
- ulong base,
- ulong limit,
- int *npages)
-{
- ulong linear,length = limit+1;
- int i,ppage,flags;
-#if 0
- ppage = base >> 12;
- *npages = (length + (base & 0xFFF) + 4095) >> 12;
- flags = PR_FIXED | PR_STATIC;
- if (base == 0xA0000) {
- /* We require the linear address to be aligned to a 64Kb boundary
- * for mapping the banked framebuffer (so we can do efficient
- * carry checking for bank changes in the assembler code). The only
- * way to ensure this is to force the linear address to be aligned
- * to a 4Mb boundary.
- */
- flags |= PR_4MEG;
- }
- if ((linear = (ulong)PageReserve(PR_SYSTEM,*npages,flags)) == (ulong)-1)
- return 0;
- if (!PageCommitPhys(linear >> 12,*npages,ppage,PC_INCR | PC_USER | PC_WRITEABLE))
- return 0;
-#endif
- return linear + (base & 0xFFF);
-}
-
-/****************************************************************************
-PARAMETERS:
-base - Physical base address of the memory to map in
-limit - Limit of physical memory to region to map in
-isCached - True if the memory should be cached, false if not
-
-RETURNS:
-Linear address of the newly mapped memory.
-
-REMARKS:
-This function maps physical memory to linear memory, which can then be used
-to create a selector or used directly from 32-bit protected mode programs.
-This is better than DPMI 0x800, since it allows you to maps physical
-memory below 1Mb, which gets this memory out of the way of the Windows VxD's
-sticky paws.
-
-NOTE: If the memory is not expected to be cached, this function will
- directly re-program the PCD (Page Cache Disable) bit in the
- page tables. There does not appear to be a mechanism in the VMM
- to control this bit via the regular interface.
-****************************************************************************/
-void * PMAPI PM_mapPhysicalAddr(
- ulong base,
- ulong limit,
- ibool isCached)
-{
- ulong linear,length = limit+1;
- int i,npages;
- ulong PDB,*pPDB;
-
- /* Search table of existing mappings to see if we have already mapped
- * a region of memory that will serve this purpose.
- */
- for (i = 0; i < numMappings; i++) {
- if (maps[i].physical == base && maps[i].length == length && maps[i].isCached == isCached)
- return (void*)maps[i].linear;
- }
- if (numMappings == MAX_MEMORY_MAPPINGS)
- return NULL;
-
- /* We did not find any previously mapped memory region, so map it in.
- * Note that we do not use MapPhysToLinear, since this function appears
- * to have problems mapping memory in the 1Mb physical address space.
- * Hence we use PageReserve and PageCommitPhys.
- */
- if ((linear = MapPhysicalToLinear(base,limit,&npages)) == 0)
- return NULL;
- maps[numMappings].physical = base;
- maps[numMappings].length = length;
- maps[numMappings].linear = linear;
- maps[numMappings].npages = npages;
- maps[numMappings].isCached = isCached;
- numMappings++;
-
-#if 0
- /* Finally disable caching where necessary */
- if (!isCached && (PDB = _PM_getPDB()) != 0) {
- int startPDB,endPDB,iPDB,startPage,endPage,start,end,iPage;
- ulong pageTable,*pPageTable;
-
- if (PDB >= 0x100000)
- pPDB = (ulong*)MapPhysicalToLinear(PDB,0xFFF,&npages);
- else
- pPDB = (ulong*)PDB;
- if (pPDB) {
- startPDB = (linear >> 22) & 0x3FF;
- startPage = (linear >> 12) & 0x3FF;
- endPDB = ((linear+limit) >> 22) & 0x3FF;
- endPage = ((linear+limit) >> 12) & 0x3FF;
- for (iPDB = startPDB; iPDB <= endPDB; iPDB++) {
- pageTable = pPDB[iPDB] & ~0xFFF;
- if (pageTable >= 0x100000)
- pPageTable = (ulong*)MapPhysicalToLinear(pageTable,0xFFF,&npages);
- else
- pPageTable = (ulong*)pageTable;
- start = (iPDB == startPDB) ? startPage : 0;
- end = (iPDB == endPDB) ? endPage : 0x3FF;
- for (iPage = start; iPage <= end; iPage++)
- pPageTable[iPage] |= 0x10;
- PageFree((ulong)pPageTable,PR_STATIC);
- }
- PageFree((ulong)pPDB,PR_STATIC);
- }
- }
-#endif
- return (void*)linear;
-}
-
-void PMAPI PM_freePhysicalAddr(void *ptr,ulong limit)
-{
- /* We never free the mappings */
-}
-
-void PMAPI PM_sleep(ulong milliseconds)
-{
- /* We never sleep in a VDD */
-}
-
-int PMAPI PM_getCOMPort(int port)
-{
- /* TODO: Re-code this to determine real values using the Plug and Play */
- /* manager for the OS. */
- switch (port) {
- case 0: return 0x3F8;
- case 1: return 0x2F8;
- }
- return 0;
-}
-
-int PMAPI PM_getLPTPort(int port)
-{
- /* TODO: Re-code this to determine real values using the Plug and Play */
- /* manager for the OS. */
- switch (port) {
- case 0: return 0x3BC;
- case 1: return 0x378;
- case 2: return 0x278;
- }
- return 0;
-}
-
-ulong PMAPI PM_getPhysicalAddr(void *p)
-{
- /* TODO: This function should find the physical address of a linear */
- /* address. */
- return 0xFFFFFFFFUL;
-}
-
-void PMAPI _PM_freeMemoryMappings(void)
-{
- int i;
-/* for (i = 0; i < numMappings; i++) */
-/* PageFree(maps[i].linear,PR_STATIC); */
-}
-
-void * PMAPI PM_mapRealPointer(uint r_seg,uint r_off)
-{ return (void*)MK_PHYS(r_seg,r_off); }
-
-void * PMAPI PM_allocRealSeg(uint size,uint *r_seg,uint *r_off)
-{ return NULL; }
-
-void PMAPI PM_freeRealSeg(void *mem)
-{ }
-
-void PMAPI DPMI_int86(int intno, DPMI_regs *regs)
-{
- /* Unsed in VDDs */
-}
-
-/****************************************************************************
-REMARKS:
-Load the V86 registers in the client state, and save the original state
-before loading the registers.
-****************************************************************************/
-static void LoadV86Registers(
- PCRF saveRegs,
- RMREGS *in,
- RMSREGS *sregs)
-{
- PCRF pcrf; /* current client register frame */
-
- /* get pointer to registers */
- pcrf = (PCRF)VDHQuerySysValue(CURRENT_VDM, VDHLSV_PCRF);
-
- /* Note: We could do VDHPushRegs instead but this should be safer as it */
- /* doesn't rely on the VDM session having enough free stack space. */
- *saveRegs = *pcrf; /* save all registers */
-
- pcrf->crf_eax = in->e.eax; /* load new values */
- pcrf->crf_ebx = in->e.ebx;
- pcrf->crf_ecx = in->e.ecx;
- pcrf->crf_edx = in->e.edx;
- pcrf->crf_esi = in->e.esi;
- pcrf->crf_edi = in->e.edi;
- pcrf->crf_es = sregs->es;
- pcrf->crf_ds = sregs->ds;
-
-}
-
-/****************************************************************************
-REMARKS:
-Read the V86 registers from the client state and restore the original state.
-****************************************************************************/
-static void ReadV86Registers(
- PCRF saveRegs,
- RMREGS *out,
- RMSREGS *sregs)
-{
- PCRF pcrf; /* current client register frame */
-
- /* get pointer to registers */
- pcrf = (PCRF)VDHQuerySysValue(CURRENT_VDM, VDHLSV_PCRF);
-
- /* read new register values */
- out->e.eax = pcrf->crf_eax;
- out->e.ebx = pcrf->crf_ebx;
- out->e.ecx = pcrf->crf_ecx;
- out->e.edx = pcrf->crf_edx;
- out->e.esi = pcrf->crf_esi;
- out->e.edi = pcrf->crf_edi;
- sregs->es = pcrf->crf_es;
- sregs->ds = pcrf->crf_ds;
-
- /* restore original client registers */
- *pcrf = *saveRegs;
-}
-
-/****************************************************************************
-REMARKS: Used for far calls into V86 code
-****************************************************************************/
-VOID HOOKENTRY UserReturnHook(
- PVOID pRefData,
- PCRF pcrf )
-{
- VDHPostEventSem(hevFarCallRet);
-}
-
-/****************************************************************************
-REMARKS: Used for calling BIOS interrupts
-****************************************************************************/
-VOID HOOKENTRY UserIRetHook(
- PVOID pRefData,
- PCRF pcrf )
-{
- VDHPostEventSem(hevIRet);
-}
-
-/****************************************************************************
-REMARKS:
-Call a V86 real mode function with the specified register values
-loaded before the call. The call returns with a far ret.
-Must be called from within a DOS session context!
-****************************************************************************/
-void PMAPI PM_callRealMode(
- uint seg,
- uint off,
- RMREGS *regs,
- RMSREGS *sregs)
-{
- CRF saveRegs;
- FPFN fnAddress;
- ULONG rc;
-
- TRACE("SDDHELP: Entering PM_callRealMode()\n");
- LoadV86Registers(SSToDS(&saveRegs),regs,sregs);
-
- /* set up return hook for call */
- rc = VDHArmReturnHook(hhookUserReturnHook, VDHARH_CSEIP_HOOK);
-
- VDHResetEventSem(hevFarCallRet);
-
- /* the address is a 16:32 pointer */
- OFFSETOF32(fnAddress) = off;
- SEGMENTOF32(fnAddress) = seg;
- rc = VDHPushFarCall(fnAddress);
- VDHYield(0);
-
- /* wait until the V86 call returns - our return hook posts the semaphore */
- rc = VDHWaitEventSem(hevFarCallRet, SEM_INDEFINITE_WAIT);
-
- ReadV86Registers(SSToDS(&saveRegs),regs,sregs);
- TRACE("SDDHELP: Exiting PM_callRealMode()\n");
-}
-
-/****************************************************************************
-REMARKS:
-Issue a V86 real mode interrupt with the specified register values
-loaded before the interrupt.
-Must be called from within a DOS session context!
-****************************************************************************/
-int PMAPI PM_int86(
- int intno,
- RMREGS *in,
- RMREGS *out)
-{
- RMSREGS sregs = {0};
- CRF saveRegs;
- ushort oldDisable;
- ULONG rc;
-
- memset(SSToDS(&sregs), 0, sizeof(sregs));
-
-#if 0 /* do we need this?? */
- /* Disable pass-up to our VDD handler so we directly call BIOS */
- TRACE("SDDHELP: Entering PM_int86()\n");
- if (disableTSRFlag) {
- oldDisable = *disableTSRFlag;
- *disableTSRFlag = 0;
- }
-#endif
-
- LoadV86Registers(SSToDS(&saveRegs), in, SSToDS(&sregs));
-
- VDHResetEventSem(hevIRet);
- rc = VDHPushInt(intno);
-
- /* set up return hook for interrupt */
- rc = VDHArmReturnHook(hhookUserIRetHook, VDHARH_NORMAL_IRET);
-
- VDHYield(0);
-
- /* wait until the V86 IRETs - our return hook posts the semaphore */
- rc = VDHWaitEventSem(hevIRet, 5000); /*SEM_INDEFINITE_WAIT); */
-
- ReadV86Registers(SSToDS(&saveRegs), out, SSToDS(&sregs));
-
-#if 0
- /* Re-enable pass-up to our VDD handler if previously enabled */
- if (disableTSRFlag)
- *disableTSRFlag = oldDisable;
-#endif
-
- TRACE("SDDHELP: Exiting PM_int86()\n");
- return out->x.ax;
-
-}
-
-/****************************************************************************
-REMARKS:
-Issue a V86 real mode interrupt with the specified register values
-loaded before the interrupt.
-****************************************************************************/
-int PMAPI PM_int86x(
- int intno,
- RMREGS *in,
- RMREGS *out,
- RMSREGS *sregs)
-{
- CRF saveRegs;
- ushort oldDisable;
- ULONG rc;
-
-#if 0
- /* Disable pass-up to our VxD handler so we directly call BIOS */
- TRACE("SDDHELP: Entering PM_int86x()\n");
- if (disableTSRFlag) {
- oldDisable = *disableTSRFlag;
- *disableTSRFlag = 0;
- }
-#endif
- LoadV86Registers(SSToDS(&saveRegs), in, sregs);
-
- VDHResetEventSem(hevIRet);
- rc = VDHPushInt(intno);
-
- /* set up return hook for interrupt */
- rc = VDHArmReturnHook(hhookUserIRetHook, VDHARH_NORMAL_IRET);
-
- VDHYield(0);
-
- /* wait until the V86 IRETs - our return hook posts the semaphore */
- rc = VDHWaitEventSem(hevIRet, 5000); /*SEM_INDEFINITE_WAIT); */
-
- ReadV86Registers(SSToDS(&saveRegs), out, sregs);
-
-#if 0
- /* Re-enable pass-up to our VxD handler if previously enabled */
- if (disableTSRFlag)
- *disableTSRFlag = oldDisable;
-#endif
-
- TRACE("SDDHELP: Exiting PM_int86x()\n");
- return out->x.ax;
-}
-
-void PMAPI PM_availableMemory(ulong *physical,ulong *total)
-{ *physical = *total = 0; }
-
-/****************************************************************************
-REMARKS:
-Allocates a block of locked physical memory.
-****************************************************************************/
-void * PMAPI PM_allocLockedMem(
- uint size,
- ulong *physAddr,
- ibool contiguous,
- ibool below16M)
-{
- ULONG flags = VDHAP_SYSTEM;
- ULONG nPages = (size + 0xFFF) >> 12;
-
- flags |= (physAddr != NULL) ? VDHAP_PHYSICAL : VDHAP_FIXED;
-
- return VDHAllocPages(physAddr, nPages, VDHAP_SYSTEM | VDHAP_PHYSICAL);
-}
-
-/****************************************************************************
-REMARKS:
-Frees a block of locked physical memory.
-****************************************************************************/
-void PMAPI PM_freeLockedMem(
- void *p,
- uint size,
- ibool contiguous)
-{
- if (p)
- VDHFreePages((PVOID)p);
-}
-
-/****************************************************************************
-REMARKS:
-Lock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_lockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
- ULONG lockHandle;
-
- /* TODO: the lock handle is essential for the unlock operation!! */
- lockHandle = VDHLockMem(p, len, 0, (PVOID)VDHLM_NO_ADDR, NULL);
-
- if (lockHandle != NULL)
- return 0;
- else
- return 1;
-}
-
-/****************************************************************************
-REMARKS:
-Unlock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_unlockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
- /* TODO: implement - use a table of lock handles? */
- /* VDHUnlockPages(lockHandle); */
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Lock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_lockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
- return PM_lockDataPages((void*)p,len,lh);
-}
-
-/****************************************************************************
-REMARKS:
-Unlock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_unlockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
- return PM_unlockDataPages((void*)p,len,lh);
-}
-
-/****************************************************************************
-REMARKS:
-OS specific shared libraries not supported inside a VDD
-****************************************************************************/
-PM_MODULE PMAPI PM_loadLibrary(
- const char *szDLLName)
-{
- (void)szDLLName;
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-OS specific shared libraries not supported inside a VDD
-****************************************************************************/
-void * PMAPI PM_getProcAddress(
- PM_MODULE hModule,
- const char *szProcName)
-{
- (void)hModule;
- (void)szProcName;
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-OS specific shared libraries not supported inside a VDD
-****************************************************************************/
-void PMAPI PM_freeLibrary(
- PM_MODULE hModule)
-{
- (void)hModule;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-void *PMAPI PM_findFirstFile(
- const char *filename,
- PM_findData *findData)
-{
- /* TODO: This function should start a directory enumeration search */
- /* given the filename (with wildcards). The data should be */
- /* converted and returned in the findData standard form. */
- (void)filename;
- (void)findData;
- return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
- void *handle,
- PM_findData *findData)
-{
- /* TODO: This function should find the next file in directory enumeration */
- /* search given the search criteria defined in the call to */
- /* PM_findFirstFile. The data should be converted and returned */
- /* in the findData standard form. */
- (void)handle;
- (void)findData;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
- void *handle)
-{
- /* TODO: This function should close the find process. This may do */
- /* nothing for some OS'es. */
- (void)handle;
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
- 1 - Drive A:
- 2 - Drive B:
- 3 - Drive C:
- etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
- char drive)
-{
- /* Not applicable in a VDD */
- (void)drive;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
- int drive,
- char *dir,
- int len)
-{
- /* Not applicable in a VDD */
- (void)drive;
- (void)dir;
- (void)len;
-}
-
-/****************************************************************************
-PARAMETERS:
-base - The starting physical base address of the region
-size - The size in bytes of the region
-type - Type to place into the MTRR register
-
-RETURNS:
-Error code describing the result.
-
-REMARKS:
-Function to enable write combining for the specified region of memory.
-****************************************************************************/
-int PMAPI PM_enableWriteCombine(
- ulong base,
- ulong size,
- uint type)
-{
- return MTRR_enableWriteCombine(base,size,type);
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
- const char *filename,
- uint attrib)
-{
- /* TODO: Implement this ? */
- (void)filename;
- (void)attrib;
- PM_fatalError("PM_setFileAttr not implemented!");
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file attributes for a specific file.
-****************************************************************************/
-uint PMAPI PM_getFileAttr(
- const char *filename)
-{
- /* TODO: Implement this ? */
- (void)filename;
- PM_fatalError("PM_getFileAttr not implemented!");
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Function to create a directory.
-****************************************************************************/
-ibool PMAPI PM_mkdir(
- const char *filename)
-{
- /* TODO: Implement this ? */
- (void)filename;
- PM_fatalError("PM_mkdir not implemented!");
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to remove a directory.
-****************************************************************************/
-ibool PMAPI PM_rmdir(
- const char *filename)
-{
- /* TODO: Implement this ? */
- (void)filename;
- PM_fatalError("PM_rmdir not implemented!");
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_getFileTime(
- const char *filename,
- ibool gmTime,
- PM_time *time)
-{
- /* TODO: Implement this ? */
- (void)filename;
- (void)gmTime;
- (void)time;
- PM_fatalError("PM_getFileTime not implemented!");
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to set the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_setFileTime(
- const char *filename,
- ibool gmTime,
- PM_time *time)
-{
- /* TODO: Implement this ? */
- (void)filename;
- (void)gmTime;
- (void)time;
- PM_fatalError("PM_setFileTime not implemented!");
- return false;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vdd/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/vdd/vflat.c
deleted file mode 100644
index 21639281a7..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vdd/vflat.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-ibool PMAPI VF_available(void)
-{
- return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
- return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vdd/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/vdd/ztimer.c
deleted file mode 100644
index 631f6558ee..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vdd/ztimer.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit OS/2 VDD
-*
-* Description: OS specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-/*---------------------------- Global variables ---------------------------*/
-
-static ulong frequency = 1193180;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-#define __ZTimerInit()
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOn(tm) VTD_Get_Real_Time(&tm->start.high,&tm->start.low)
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-static ulong __LZTimerLap(
- LZTimerObject *tm)
-{
- CPU_largeInteger lap,count;
- VTD_Get_Real_Time(&lap.high,&lap.low);
- _CPU_diffTime64(&tm->start,&lap,&count);
- return _CPU_calcMicroSec(&count,frequency);
-}
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOff(tm) VTD_Get_Real_Time(&tm->end.high,&tm->end.low)
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-static ulong __LZTimerCount(
- LZTimerObject *tm)
-{
- CPU_largeInteger tmCount;
- _CPU_diffTime64(&tm->start,&tm->end,&tmCount);
- return _CPU_calcMicroSec(&tmCount,frequency);
-}
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION 1000
-
-/****************************************************************************
-REMARKS:
-Read the Long Period timer value from the BIOS timer tick.
-****************************************************************************/
-static ulong __ULZReadTime(void)
-{
- return VDHQuerySysValue(0, VDHGSV_MSECSBOOT);
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{ return finish - start; }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vxd/_pm.asm b/board/MAI/bios_emulator/scitech/src/pm/vxd/_pm.asm
deleted file mode 100644
index 64a7cecb2d..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vxd/_pm.asm
+++ /dev/null
@@ -1,299 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Language: 80386 Assembler, TASM 4.0 or NASM
-;* Environment: 32-bit Windows VxD
-;*
-;* Description: Low level assembly support for the PM library specific to
-;* Windows VxDs.
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac" ; Memory model macros
-
-header _pm ; Set up memory model
-
-begdataseg _pm
-
- cextern _PM_savedDS,USHORT
-
-enddataseg _pm
-
-P586
-
-begcodeseg _pm ; Start of code segment
-
-;----------------------------------------------------------------------------
-; void PM_segread(PMSREGS *sregs)
-;----------------------------------------------------------------------------
-; Read the current value of all segment registers
-;----------------------------------------------------------------------------
-cprocstart PM_segread
-
- ARG sregs:DPTR
-
- enter_c
-
- mov ax,es
- _les _si,[sregs]
- mov [_ES _si],ax
- mov [_ES _si+2],cs
- mov [_ES _si+4],ss
- mov [_ES _si+6],ds
- mov [_ES _si+8],fs
- mov [_ES _si+10],gs
-
- leave_c
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; int PM_int386x(int intno, PMREGS *in, PMREGS *out,PMSREGS *sregs)
-;----------------------------------------------------------------------------
-; Issues a software interrupt in protected mode. This routine has been
-; written to allow user programs to load CS and DS with different values
-; other than the default.
-;----------------------------------------------------------------------------
-cprocstart PM_int386x
-
-; Not used for VxDs
-
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_saveDS(void)
-;----------------------------------------------------------------------------
-; Save the value of DS into a section of the code segment, so that we can
-; quickly load this value at a later date in the PM_loadDS() routine from
-; inside interrupt handlers etc. The method to do this is different
-; depending on the DOS extender being used.
-;----------------------------------------------------------------------------
-cprocstart PM_saveDS
-
- mov [_PM_savedDS],ds ; Store away in data segment
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_loadDS(void)
-;----------------------------------------------------------------------------
-; Routine to load the DS register with the default value for the current
-; DOS extender. Only the DS register is loaded, not the ES register, so
-; if you wish to call C code, you will need to also load the ES register
-; in 32 bit protected mode.
-;----------------------------------------------------------------------------
-cprocstart PM_loadDS
-
- mov ds,[cs:_PM_savedDS] ; We can access the proper DS through CS
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setBankA(int bank)
-;----------------------------------------------------------------------------
-cprocstart PM_setBankA
-
-; Not used for VxDs
-
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setBankAB(int bank)
-;----------------------------------------------------------------------------
-cprocstart PM_setBankAB
-
-; Not used for VxDs
-
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void PM_setCRTStart(int x,int y,int waitVRT)
-;----------------------------------------------------------------------------
-cprocstart PM_setCRTStart
-
-; Not used for VxDs
-
- ret
-
-cprocend
-
-; Macro to delay briefly to ensure that enough time has elapsed between
-; successive I/O accesses so that the device being accessed can respond
-; to both accesses even on a very fast PC.
-
-ifdef USE_NASM
-%macro DELAY 0
- jmp short $+2
- jmp short $+2
- jmp short $+2
-%endmacro
-%macro IODELAYN 1
-%rep %1
- DELAY
-%endrep
-%endmacro
-else
-macro DELAY
- jmp short $+2
- jmp short $+2
- jmp short $+2
-endm
-macro IODELAYN N
- rept N
- DELAY
- endm
-endm
-endif
-
-;----------------------------------------------------------------------------
-; uchar _PM_readCMOS(int index)
-;----------------------------------------------------------------------------
-; Read the value of a specific CMOS register. We do this with both
-; normal interrupts and NMI disabled.
-;----------------------------------------------------------------------------
-cprocstart _PM_readCMOS
-
- ARG index:UINT
-
- push _bp
- mov _bp,_sp
- pushfd
- mov al,[BYTE index]
- or al,80h ; Add disable NMI flag
- cli
- out 70h,al
- IODELAYN 5
- in al,71h
- mov ah,al
- xor al,al
- IODELAYN 5
- out 70h,al ; Re-enable NMI
- mov al,ah ; Return value in AL
- popfd
- pop _bp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; void _PM_writeCMOS(int index,uchar value)
-;----------------------------------------------------------------------------
-; Read the value of a specific CMOS register. We do this with both
-; normal interrupts and NMI disabled.
-;----------------------------------------------------------------------------
-cprocstart _PM_writeCMOS
-
- ARG index:UINT, value:UCHAR
-
- push _bp
- mov _bp,_sp
- pushfd
- mov al,[BYTE index]
- or al,80h ; Add disable NMI flag
- cli
- out 70h,al
- IODELAYN 5
- mov al,[value]
- out 71h,al
- xor al,al
- IODELAYN 5
- out 70h,al ; Re-enable NMI
- popfd
- pop _bp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; double _ftol(double f)
-;----------------------------------------------------------------------------
-; Calls to __ftol are generated by the Borland C++ compiler for code
-; that needs to convert a floating point type to an integral type.
-;
-; Input: floating point number on the top of the '87.
-;
-; Output: a (signed or unsigned) long in EAX
-; All other registers preserved.
-;-----------------------------------------------------------------------
-cprocstart _ftol
-
- LOCAL temp1:WORD, temp2:QWORD = LocalSize
-
- push ebp
- mov ebp,esp
- sub esp,LocalSize
-
- fstcw [temp1] ; save the control word
- fwait
- mov al,[BYTE temp1+1]
- or [BYTE temp1+1],0Ch ; set rounding control to chop
- fldcw [temp1]
- fistp [temp2] ; convert to 64-bit integer
- mov [BYTE temp1+1],al
- fldcw [temp1] ; restore the control word
- mov eax,[DWORD temp2] ; return LS 32 bits
- mov edx,[DWORD temp2+4] ; MS 32 bits
-
- mov esp,ebp
- pop ebp
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; _PM_getPDB - Return the Page Table Directory Base address
-;----------------------------------------------------------------------------
-cprocstart _PM_getPDB
-
- mov eax,cr3
- and eax,0FFFFF000h
- ret
-
-cprocend
-
-;----------------------------------------------------------------------------
-; Flush the Translation Lookaside buffer
-;----------------------------------------------------------------------------
-cprocstart PM_flushTLB
-
- wbinvd ; Flush the CPU cache
- mov eax,cr3
- mov cr3,eax ; Flush the TLB
- ret
-
-cprocend
-
-endcodeseg _pm
-
- END ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vxd/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/vxd/cpuinfo.c
deleted file mode 100644
index 3c7eaaeaac..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vxd/cpuinfo.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit Windows VxD
-*
-* Description: VxD specific code for the CPU detection module.
-*
-****************************************************************************/
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Do nothing for VxD's
-****************************************************************************/
-#define SetMaxThreadPriority() 0
-
-/****************************************************************************
-REMARKS:
-Do nothing for VxD's
-****************************************************************************/
-#define RestoreThreadPriority(i) (void)(i)
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
- CPU_largeInteger *freq)
-{
- freq->low = 1193180;
- freq->high = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-****************************************************************************/
-#define GetCounter(t) \
-{ \
- CPU_largeInteger count; \
- VTD_Get_Real_Time(&count.high,&count.low); \
- (t)->low = count.low; \
- (t)->high = count.high; \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vxd/fileio.c b/board/MAI/bios_emulator/scitech/src/pm/vxd/fileio.c
deleted file mode 100644
index 3c6ce99208..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vxd/fileio.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit Windows VxD
-*
-* Description: C library compatible I/O functions for use within a VxD.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "vxdfile.h"
-
-/*------------------------ Main Code Implementation -----------------------*/
-
-#define EOF -1
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C fopen function.
-****************************************************************************/
-FILE * fopen(
- const char *filename,
- const char *mode)
-{
- FILE *f = PM_malloc(sizeof(FILE));
- long oldpos;
-
- if (f) {
- f->offset = 0;
- f->text = (mode[1] == 't' || mode[2] == 't');
- f->writemode = (mode[0] == 'w') || (mode[0] == 'a');
- if (initComplete) {
- WORD omode,error;
- BYTE action;
-
- if (mode[0] == 'r') {
- omode = OPEN_ACCESS_READONLY | OPEN_SHARE_COMPATIBLE;
- action = ACTION_IFEXISTS_OPEN | ACTION_IFNOTEXISTS_FAIL;
- }
- else if (mode[0] == 'w') {
- omode = OPEN_ACCESS_WRITEONLY | OPEN_SHARE_COMPATIBLE;
- action = ACTION_IFEXISTS_TRUNCATE | ACTION_IFNOTEXISTS_CREATE;
- }
- else {
- omode = OPEN_ACCESS_READWRITE | OPEN_SHARE_COMPATIBLE;
- action = ACTION_IFEXISTS_OPEN | ACTION_IFNOTEXISTS_CREATE;
- }
- f->handle = (int)R0_OpenCreateFile(false,(char*)filename,omode,ATTR_NORMAL,action,0,&error,&action);
- if (f->handle == 0) {
- PM_free(f);
- return NULL;
- }
- f->filesize = R0_GetFileSize((HANDLE)f->handle,&error);
- if (mode[0] == 'a')
- fseek(f,0,2);
- }
- else {
- int oflag,pmode;
-
- if (mode[0] == 'r') {
- pmode = _S_IREAD;
- oflag = _O_RDONLY;
- }
- else if (mode[0] == 'w') {
- pmode = _S_IWRITE;
- oflag = _O_WRONLY | _O_CREAT | _O_TRUNC;
- }
- else {
- pmode = _S_IWRITE;
- oflag = _O_RDWR | _O_CREAT | _O_APPEND;
- }
- if (f->text)
- oflag |= _O_TEXT;
- else
- oflag |= _O_BINARY;
- if ((f->handle = i_open(filename,oflag,pmode)) == -1) {
- PM_free(f);
- return NULL;
- }
- oldpos = i_lseek(f->handle,0,1);
- f->filesize = i_lseek(f->handle,0,2);
- i_lseek(f->handle,oldpos,0);
- }
- }
- return f;
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C fread function. Note that the VxD file I/O
-functions are layered on DOS, so can only read up to 64K at a time. Since
-we are expected to handle much larger chunks than this, we handle larger
-blocks automatically in here.
-****************************************************************************/
-size_t fread(
- void *ptr,
- size_t size,
- size_t n,
- FILE *f)
-{
- char *buf = ptr;
- WORD error;
- int bytes = size * n;
- int readbytes,totalbytes = 0;
-
- while (bytes > 0x10000) {
- if (initComplete) {
- readbytes = R0_ReadFile(false,(HANDLE)f->handle,buf,0x8000,f->offset,&error);
- readbytes += R0_ReadFile(false,(HANDLE)f->handle,buf+0x8000,0x8000,f->offset+0x8000,&error);
- }
- else {
- readbytes = i_read(f->handle,buf,0x8000);
- readbytes += i_read(f->handle,buf+0x8000,0x8000);
- }
- totalbytes += readbytes;
- f->offset += readbytes;
- buf += 0x10000;
- bytes -= 0x10000;
- }
- if (bytes) {
- if (initComplete)
- readbytes = R0_ReadFile(false,(HANDLE)f->handle,buf,bytes,f->offset,&error);
- else
- readbytes = i_read(f->handle,buf,bytes);
- totalbytes += readbytes;
- f->offset += readbytes;
- }
- return totalbytes / size;
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C fwrite function. Note that the VxD file I/O
-functions are layered on DOS, so can only read up to 64K at a time. Since
-we are expected to handle much larger chunks than this, we handle larger
-blocks automatically in here.
-****************************************************************************/
-size_t fwrite(
- const void *ptr,
- size_t size,
- size_t n,
- FILE *f)
-{
- const char *buf = ptr;
- WORD error;
- int bytes = size * n;
- int writtenbytes,totalbytes = 0;
-
- if (!f->writemode)
- return 0;
- while (bytes > 0x10000) {
- if (initComplete) {
- writtenbytes = R0_WriteFile(false,(HANDLE)f->handle,buf,0x8000,f->offset,&error);
- writtenbytes += R0_WriteFile(false,(HANDLE)f->handle,buf+0x8000,0x8000,f->offset+0x8000,&error);
- }
- else {
- writtenbytes = i_write(f->handle,buf,0x8000);
- writtenbytes += i_write(f->handle,buf+0x8000,0x8000);
- }
- totalbytes += writtenbytes;
- f->offset += writtenbytes;
- buf += 0x10000;
- bytes -= 0x10000;
- }
- if (initComplete)
- writtenbytes = R0_WriteFile(false,(HANDLE)f->handle,buf,bytes,f->offset,&error);
- else
- writtenbytes = i_write(f->handle,buf,bytes);
- totalbytes += writtenbytes;
- f->offset += writtenbytes;
- if (f->offset > f->filesize)
- f->filesize = f->offset;
- return totalbytes / size;
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C fflush function.
-****************************************************************************/
-int fflush(
- FILE *f)
-{
- /* Nothing to do since we are not doing buffered file I/O */
- (void)f;
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C fseek function.
-****************************************************************************/
-int fseek(
- FILE *f,
- long int offset,
- int whence)
-{
- if (whence == 0)
- f->offset = offset;
- else if (whence == 1)
- f->offset += offset;
- else if (whence == 2)
- f->offset = f->filesize + offset;
- if (!initComplete)
- i_lseek(f->handle,f->offset,0);
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C ftell function.
-****************************************************************************/
-long ftell(
- FILE *f)
-{
- return f->offset;
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C feof function.
-****************************************************************************/
-int feof(
- FILE *f)
-{
- return (f->offset == f->filesize);
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C fgets function.
-****************************************************************************/
-char *fgets(
- char *s,
- int n,
- FILE *f)
-{
- int len;
- char *cs;
-
- /* Read the entire buffer into memory (our functions are unbuffered!) */
- if ((len = fread(s,1,n,f)) == 0)
- return NULL;
-
- /* Search for '\n' or end of string */
- if (n > len)
- n = len;
- cs = s;
- while (--n > 0) {
- if (*cs == '\n')
- break;
- cs++;
- }
- *cs = '\0';
- return s;
-}
-
-/****************************************************************************
-REMARKS:
-NT driver implementation of the ANSI C fputs function.
-****************************************************************************/
-int fputs(
- const char *s,
- FILE *f)
-{
- return fwrite(s,1,strlen(s),f);
-}
-
-/****************************************************************************
-REMARKS:
-VxD implementation of the ANSI C fclose function.
-****************************************************************************/
-int fclose(
- FILE *f)
-{
- WORD error;
-
- if (initComplete)
- R0_CloseFile((HANDLE)f->handle,&error);
- else
- i_close(f->handle);
- PM_free(f);
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vxd/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/vxd/oshdr.h
deleted file mode 100644
index 7efc0f9f85..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vxd/oshdr.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit Windows VxD
-*
-* Description: Include file to include all OS specific header files.
-*
-****************************************************************************/
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vxd/pm.c b/board/MAI/bios_emulator/scitech/src/pm/vxd/pm.c
deleted file mode 100644
index 4cb7f19ed4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vxd/pm.c
+++ /dev/null
@@ -1,1359 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit Windows VxD
-*
-* Description: Implementation for the OS Portability Manager Library, which
-* contains functions to implement OS specific services in a
-* generic, cross platform API. Porting the OS Portability
-* Manager library is the first step to porting any SciTech
-* products to a new platform.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "sdd/sddhelp.h"
-#include "mtrr.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-#define MAX_MEMORY_SHARED 100
-#define MAX_MEMORY_MAPPINGS 100
-
-typedef struct {
- void *linear;
- ulong global;
- ulong length;
- int npages;
- } memshared;
-
-typedef struct {
- ulong physical;
- ulong linear;
- ulong length;
- int npages;
- ibool isCached;
- } mmapping;
-
-static int numMappings = 0;
-static memshared shared[MAX_MEMORY_MAPPINGS] = {0};
-static mmapping maps[MAX_MEMORY_MAPPINGS];
-extern ibool _PM_haveBIOS;
-char _PM_cntPath[PM_MAX_PATH] = "";
-char _PM_nucleusPath[PM_MAX_PATH] = "";
-uchar *_PM_rmBufAddr = NULL;
-ushort _VARAPI _PM_savedDS = 0;
-static uchar _PM_oldCMOSRegA;
-static uchar _PM_oldCMOSRegB;
-PM_intHandler _PM_rtcHandler = NULL;
-IRQHANDLE RTCIRQHandle = 0;
-VPICD_HWInt_THUNK RTCInt_Thunk;
-
-static char *szWindowsKey = "Software\\Microsoft\\Windows\\CurrentVersion";
-static char *szSystemRoot = "SystemRoot";
-static char *szMachineNameKey = "System\\CurrentControlSet\\control\\ComputerName\\ComputerName";
-static char *szMachineName = "ComputerName";
-static void (PMAPIP fatalErrorCleanup)(void) = NULL;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* Functions to read and write CMOS registers */
-
-ulong PMAPI _PM_getPDB(void);
-uchar PMAPI _PM_readCMOS(int index);
-void PMAPI _PM_writeCMOS(int index,uchar value);
-
-/****************************************************************************
-REMARKS:
-PM_malloc override function for Nucleus drivers loaded in VxD's.
-****************************************************************************/
-void * VXD_malloc(
- size_t size)
-{
- return PM_mallocShared(size);
-}
-
-/****************************************************************************
-REMARKS:
-PM_calloc override function for Nucleus drivers loaded in VxD's.
-****************************************************************************/
-void * VXD_calloc(
- size_t nelem,
- size_t size)
-{
- void *p = PM_mallocShared(nelem * size);
- if (p)
- memset(p,0,nelem * size);
- return p;
-}
-
-/****************************************************************************
-REMARKS:
-PM_realloc override function for Nucleus drivers loaded in VxD's.
-****************************************************************************/
-void * VXD_realloc(
- void *ptr,
- size_t size)
-{
- void *p = PM_mallocShared(size);
- if (p) {
- memcpy(p,ptr,size);
- PM_freeShared(ptr);
- }
- return p;
-}
-
-/****************************************************************************
-REMARKS:
-PM_free override function for Nucleus drivers loaded in VxD's.
-****************************************************************************/
-void VXD_free(
- void *p)
-{
- PM_freeShared(p);
-}
-
-/****************************************************************************
-REMARKS:
-Initialise the PM library.
-****************************************************************************/
-void PMAPI PM_init(void)
-{
- /* Override the default memory allocators for all Nucleus drivers
- * loaded in SDDHELP/PMHELP. We do this so that we can ensure all memory
- * dynamically allocated by Nucleus drivers and internal C runtime
- * library functions are shared memory blocks that all processes
- * connecting to SDDHELP can see.
- */
- PM_useLocalMalloc(VXD_malloc,VXD_calloc,VXD_realloc,VXD_free);
-
- /* Initialiase the MTRR module */
- MTRR_init();
-}
-
-ibool PMAPI PM_haveBIOSAccess(void)
-{ return _PM_haveBIOS; }
-
-long PMAPI PM_getOSType(void)
-{ return _OS_WIN32VXD; }
-
-int PMAPI PM_getModeType(void)
-{ return PM_386; }
-
-void PMAPI PM_backslash(char *s)
-{
- uint pos = strlen(s);
- if (s[pos-1] != '\\') {
- s[pos] = '\\';
- s[pos+1] = '\0';
- }
-}
-
-void PMAPI PM_setFatalErrorCleanup(
- void (PMAPIP cleanup)(void))
-{
- fatalErrorCleanup = cleanup;
-}
-
-void PMAPI PM_fatalError(const char *msg)
-{
- if (fatalErrorCleanup)
- fatalErrorCleanup();
- Fatal_Error_Handler(msg,0);
-}
-
-/****************************************************************************
-PARAMETERS:
-len - Place to store the length of the buffer
-rseg - Place to store the real mode segment of the buffer
-roff - Place to store the real mode offset of the buffer
-
-REMARKS:
-This function returns the address and length of the global VESA transfer
-buffer that is used for communicating with the VESA BIOS functions from
-Win16 and Win32 programs under Windows.
-****************************************************************************/
-void * PMAPI PM_getVESABuf(
- uint *len,
- uint *rseg,
- uint *roff)
-{
- /* If the VxD is dynamically loaded we will not have a real mode
- * transfer buffer to return, so we fail the call.
- */
- if (_PM_rmBufAddr) {
- *len = VESA_BUF_SIZE;
- *rseg = (ulong)(_PM_rmBufAddr) >> 4;
- *roff = (ulong)(_PM_rmBufAddr) & 0xF;
- return _PM_rmBufAddr;
- }
- return NULL;
-}
-
-int PMAPI PM_int386(
- int intno,
- PMREGS *in,
- PMREGS *out)
-{
- /* Unused in VxDs */
- return 0;
-}
-
-void PMAPI _PM_getRMvect(
- int intno,
- long *realisr)
-{
- WORD seg;
- DWORD off;
-
- Get_V86_Int_Vector(intno,&seg,&off);
- *realisr = ((long)seg << 16) | (off & 0xFFFF);
-}
-
-void PMAPI _PM_setRMvect(
- int intno,
- long realisr)
-{
- Set_V86_Int_Vector(intno,realisr >> 16,realisr & 0xFFFF);
-}
-
-char * PMAPI PM_getCurrentPath(
- char *path,
- int maxLen)
-{
- strncpy(path,_PM_cntPath,maxLen);
- path[maxLen-1] = 0;
- return path;
-}
-
-char PMAPI PM_getBootDrive(void)
-{ return 'c'; }
-
-const char * PMAPI PM_getVBEAFPath(void)
-{ return "c:\\"; }
-
-/****************************************************************************
-PARAMETERS:
-szKey - Key to query (can contain version number formatting)
-szValue - Value to get information for
-value - Place to store the registry key data read
-size - Size of the string buffer to read into
-
-RETURNS:
-true if the key was found, false if not.
-****************************************************************************/
-static ibool REG_queryString(
- char *szKey,
- char *szValue,
- char *value,
- ulong size)
-{
- HKEY hKey;
- ulong type;
- ibool status = false;
-
- memset(value,0,sizeof(value));
- if (RegOpenKey(HKEY_LOCAL_MACHINE,szKey,&hKey) == ERROR_SUCCESS) {
- if (RegQueryValueEx(hKey,(PCHAR)szValue,(ulong*)NULL,(ulong*)&type,value,(ulong*)&size) == ERROR_SUCCESS)
- status = true;
- RegCloseKey(hKey);
- }
- return status;
-}
-
-const char * PMAPI PM_getNucleusPath(void)
-{
- static char path[256];
-
- if (strlen(_PM_nucleusPath) > 0) {
- strcpy(path,_PM_nucleusPath);
- PM_backslash(path);
- return path;
- }
- if (!REG_queryString(szWindowsKey,szSystemRoot,path,sizeof(path)))
- strcpy(path,"c:\\windows");
- PM_backslash(path);
- strcat(path,"system\\nucleus");
- return path;
-}
-
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
- static char path[256];
- strcpy(path,PM_getNucleusPath());
- PM_backslash(path);
- strcat(path,"config");
- return path;
-}
-
-const char * PMAPI PM_getUniqueID(void)
-{ return PM_getMachineName(); }
-
-const char * PMAPI PM_getMachineName(void)
-{
- static char name[256];
- if (REG_queryString(szMachineNameKey,szMachineName,name,sizeof(name)))
- return name;
- return "Unknown";
-}
-
-int PMAPI PM_kbhit(void)
-{ return 1; }
-
-int PMAPI PM_getch(void)
-{ return 0; }
-
-PM_HWND PMAPI PM_openConsole(
- PM_HWND hwndUser,
- int device,
- int xRes,
- int yRes,
- int bpp,
- ibool fullScreen)
-{
- /* Unused in VxDs */
- return NULL;
-}
-
-int PMAPI PM_getConsoleStateSize(void)
-{
- /* Unused in VxDs */
- return 1;
-}
-
-void PMAPI PM_saveConsoleState(
- void *stateBuf,
- PM_HWND hwndConsole)
-{
- /* Unused in VxDs */
-}
-
-void PMAPI PM_setSuspendAppCallback(
- int (_ASMAPIP saveState)(
- int flags))
-{
- /* Unused in VxDs */
-}
-
-void PMAPI PM_restoreConsoleState(
- const void *stateBuf,
- PM_HWND hwndConsole)
-{
- /* Unused in VxDs */
-}
-
-void PMAPI PM_closeConsole(
- PM_HWND hwndConsole)
-{
- /* Unused in VxDs */
-}
-
-void PM_setOSCursorLocation(
- int x,
- int y)
-{
- uchar *_biosPtr = PM_getBIOSPointer();
- PM_setByte(_biosPtr+0x50,x);
- PM_setByte(_biosPtr+0x51,y);
-}
-
-void PM_setOSScreenWidth(
- int width,
- int height)
-{
- uchar *_biosPtr = PM_getBIOSPointer();
- PM_setByte(_biosPtr+0x4A,width);
- PM_setByte(_biosPtr+0x84,height-1);
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of shared memory. For Win9x we allocate shared memory
-as locked, global memory that is accessible from any memory context
-(including interrupt time context), which allows us to load our important
-data structure and code such that we can access it directly from a ring
-0 interrupt context.
-****************************************************************************/
-void * PMAPI PM_mallocShared(
- long size)
-{
- MEMHANDLE hMem;
- DWORD pgNum,nPages = (size + 0xFFF) >> 12;
- int i;
-
- /* First find a free slot in our shared memory table */
- for (i = 0; i < MAX_MEMORY_SHARED; i++) {
- if (shared[i].linear == 0)
- break;
- }
- if (i < MAX_MEMORY_SHARED) {
- PageAllocate(nPages,PG_SYS,0,0,0,0,NULL,0,&hMem,&shared[i].linear);
- shared[i].npages = nPages;
- pgNum = (ulong)shared[i].linear >> 12;
- shared[i].global = LinPageLock(pgNum,nPages,PAGEMAPGLOBAL);
- return (void*)shared[i].global;
- }
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of shared memory
-****************************************************************************/
-void PMAPI PM_freeShared(void *p)
-{
- int i;
-
- /* Find a shared memory block in our table and free it */
- for (i = 0; i < MAX_MEMORY_SHARED; i++) {
- if (shared[i].global == (ulong)p) {
- LinPageUnLock(shared[i].global >> 12,shared[i].npages,PAGEMAPGLOBAL);
- PageFree((ulong)shared[i].linear,0);
- shared[i].linear = 0;
- break;
- }
- }
-}
-
-/****************************************************************************
-REMARKS:
-Maps a shared memory block into process address space. Does nothing since
-the memory blocks are already globally7 mapped into all processes.
-****************************************************************************/
-void * PMAPI PM_mapToProcess(
- void *base,
- ulong limit)
-{
- return (void*)base;
-}
-
-ibool PMAPI PM_doBIOSPOST(
- ushort axVal,
- ulong BIOSPhysAddr,
- void *mappedBIOS,
- ulong BIOSLen)
-{
- /* TODO: Figure out how to do this */
- return false;
-}
-
-void * PMAPI PM_getBIOSPointer(void)
-{ return (void*)0x400; }
-
-void * PMAPI PM_getA0000Pointer(void)
-{ return PM_mapPhysicalAddr(0xA0000,0xFFFF,true); }
-
-/****************************************************************************
-PARAMETERS:
-base - Physical base address of the memory to maps in
-limit - Limit of physical memory to region to maps in
-
-RETURNS:
-Linear address of the newly mapped memory.
-
-REMARKS:
-Maps a physical memory range to a linear memory range.
-****************************************************************************/
-ulong _PM_mapPhysicalToLinear(
- ulong base,
- ulong limit,
- int *npages)
-{
- ulong linear,length = limit+1;
- int i,ppage,flags;
-
- if (base < 0x100000) {
- /* Windows 9x is zero based for the first meg of memory */
- return base;
- }
- ppage = base >> 12;
- *npages = (length + (base & 0xFFF) + 4095) >> 12;
- flags = PR_FIXED | PR_STATIC;
- if (base == 0xA0000) {
- /* We require the linear address to be aligned to a 64Kb boundary
- * for mapping the banked framebuffer (so we can do efficient
- * carry checking for bank changes in the assembler code). The only
- * way to ensure this is to force the linear address to be aligned
- * to a 4Mb boundary.
- */
- flags |= PR_4MEG;
- }
- if ((linear = (ulong)PageReserve(PR_SYSTEM,*npages,flags)) == (ulong)-1)
- return 0xFFFFFFFF;
- if (!PageCommitPhys(linear >> 12,*npages,ppage,PC_INCR | PC_USER | PC_WRITEABLE))
- return 0xFFFFFFFF;
- return linear + (base & 0xFFF);
-}
-
-/* Page table flags */
-
-#define PAGE_FLAGS_PRESENT 0x00000001
-#define PAGE_FLAGS_WRITEABLE 0x00000002
-#define PAGE_FLAGS_USER 0x00000004
-#define PAGE_FLAGS_WRITE_THROUGH 0x00000008
-#define PAGE_FLAGS_CACHE_DISABLE 0x00000010
-#define PAGE_FLAGS_ACCESSED 0x00000020
-#define PAGE_FLAGS_DIRTY 0x00000040
-#define PAGE_FLAGS_4MB 0x00000080
-
-/****************************************************************************
-PARAMETERS:
-base - Physical base address of the memory to maps in
-limit - Limit of physical memory to region to maps in
-isCached - True if the memory should be cached, false if not
-
-RETURNS:
-Linear address of the newly mapped memory.
-
-REMARKS:
-This function maps physical memory to linear memory, which can then be used
-to create a selector or used directly from 32-bit protected mode programs.
-This is better than DPMI 0x800, since it allows you to maps physical
-memory below 1Mb, which gets this memory out of the way of the Windows VDD's
-sticky paws.
-
-NOTE: If the memory is not expected to be cached, this function will
- directly re-program the PCD (Page Cache Disable) bit in the
- page tables. There does not appear to be a mechanism in the VMM
- to control this bit via the regular interface.
-****************************************************************************/
-void * PMAPI PM_mapPhysicalAddr(
- ulong base,
- ulong limit,
- ibool isCached)
-{
- ulong linear,length = limit+1;
- int i,npages;
- ulong PDB,*pPDB;
-
- /* Search table of existing mappings to see if we have already mapped
- * a region of memory that will serve this purpose.
- */
- for (i = 0; i < numMappings; i++) {
- if (maps[i].physical == base && maps[i].length == length && maps[i].isCached == isCached)
- return (void*)maps[i].linear;
- }
- if (numMappings == MAX_MEMORY_MAPPINGS)
- return NULL;
-
- /* We did not find any previously mapped memory region, so maps it in.
- * Note that we do not use MapPhysToLinear, since this function appears
- * to have problems mapping memory in the 1Mb physical address space.
- * Hence we use PageReserve and PageCommitPhys.
- */
- if ((linear = _PM_mapPhysicalToLinear(base,limit,&npages)) == 0xFFFFFFFF)
- return NULL;
- maps[numMappings].physical = base;
- maps[numMappings].length = length;
- maps[numMappings].linear = linear;
- maps[numMappings].npages = npages;
- maps[numMappings].isCached = isCached;
- numMappings++;
-
- /* Finally disable caching where necessary */
- if (!isCached && (PDB = _PM_getPDB()) != 0) {
- int startPDB,endPDB,iPDB,startPage,endPage,start,end,iPage;
- ulong pageTable,*pPageTable;
- pPDB = (ulong*)_PM_mapPhysicalToLinear(PDB,0xFFF,&npages);
- if (pPDB) {
- startPDB = (linear >> 22) & 0x3FF;
- startPage = (linear >> 12) & 0x3FF;
- endPDB = ((linear+limit) >> 22) & 0x3FF;
- endPage = ((linear+limit) >> 12) & 0x3FF;
- for (iPDB = startPDB; iPDB <= endPDB; iPDB++) {
- /* Set the bits in the page directory entry - required as per */
- /* Pentium 4 manual. This also takes care of the 4MB page entries */
- pPDB[iPDB] = pPDB[iPDB] |= (PAGE_FLAGS_WRITE_THROUGH | PAGE_FLAGS_CACHE_DISABLE);
- if (!(pPDB[iPDB] & PAGE_FLAGS_4MB)) {
- /* If we are dealing with 4KB pages then we need to iterate */
- /* through each of the page table entries */
- pageTable = pPDB[iPDB] & ~0xFFF;
- pPageTable = (ulong*)_PM_mapPhysicalToLinear(pageTable,0xFFF,&npages);
- start = (iPDB == startPDB) ? startPage : 0;
- end = (iPDB == endPDB) ? endPage : 0x3FF;
- for (iPage = start; iPage <= end; iPage++)
- pPageTable[iPage] |= (PAGE_FLAGS_WRITE_THROUGH | PAGE_FLAGS_CACHE_DISABLE);
- PageFree((ulong)pPageTable,PR_STATIC);
- }
- }
- PageFree((ulong)pPDB,PR_STATIC);
- PM_flushTLB();
- }
- }
- return (void*)linear;
-}
-
-void PMAPI PM_freePhysicalAddr(
- void *ptr,
- ulong limit)
-{
- /* We never free the mappings */
-}
-
-void PMAPI PM_sleep(ulong milliseconds)
-{
- /* We never sleep in a VxD */
-}
-
-int PMAPI PM_getCOMPort(int port)
-{
- /* TODO: Re-code this to determine real values using the Plug and Play */
- /* manager for the OS. */
- switch (port) {
- case 0: return 0x3F8;
- case 1: return 0x2F8;
- case 2: return 0x3E8;
- case 3: return 0x2E8;
- }
- return 0;
-}
-
-int PMAPI PM_getLPTPort(int port)
-{
- /* TODO: Re-code this to determine real values using the Plug and Play */
- /* manager for the OS. */
- switch (port) {
- case 0: return 0x3BC;
- case 1: return 0x378;
- case 2: return 0x278;
- }
- return 0;
-}
-
-ulong PMAPI PM_getPhysicalAddr(
- void *p)
-{
- DWORD pte;
-
- /* Touch the memory before calling CopyPageTable. For some reason */
- /* we need to do this on Windows 9x, otherwise the memory may not */
- /* be paged in correctly. Of course if the passed in pointer is */
- /* invalid, this function will fault, but we shouldn't be passed bogus */
- /* pointers anyway ;-) */
- pte = *((ulong*)p);
-
- /* Return assembled address value only if VMM service succeeds */
- if (CopyPageTable(((DWORD)p) >> 12, 1, (PVOID*)&pte, 0))
- return (pte & ~0xFFF) | (((DWORD)p) & 0xFFF);
-
- /* Return failure to the caller! */
- return 0xFFFFFFFFUL;
-}
-
-ibool PMAPI PM_getPhysicalAddrRange(
- void *p,
- ulong length,
- ulong *physAddress)
-{
- int i;
- ulong linear = (ulong)p & ~0xFFF;
-
- for (i = (length + 0xFFF) >> 12; i > 0; i--) {
- if ((*physAddress++ = PM_getPhysicalAddr((void*)linear)) == 0xFFFFFFFF)
- return false;
- linear += 4096;
- }
- return true;
-}
-
-void PMAPI _PM_freeMemoryMappings(void)
-{
- int i;
- for (i = 0; i < numMappings; i++)
- PageFree(maps[i].linear,PR_STATIC);
-}
-
-void * PMAPI PM_mapRealPointer(
- uint r_seg,
- uint r_off)
-{
- return (void*)MK_PHYS(r_seg,r_off);
-}
-
-void * PMAPI PM_allocRealSeg(
- uint size,
- uint *r_seg,
- uint *r_off)
-{
- return NULL;
-}
-
-void PMAPI PM_freeRealSeg(
- void *mem)
-{
-}
-
-void PMAPI DPMI_int86(
- int intno,
- DPMI_regs *regs)
-{
- /* Unsed in VxD's */
-}
-
-/****************************************************************************
-REMARKS:
-Load the V86 registers in the client state, and save the original state
-before loading the registers.
-****************************************************************************/
-static void LoadV86Registers(
- CLIENT_STRUCT *saveRegs,
- RMREGS *in,
- RMSREGS *sregs)
-{
- CLIENT_STRUCT newRegs;
-
- Save_Client_State(saveRegs);
- newRegs = *saveRegs;
- newRegs.CRS.Client_EAX = in->e.eax;
- newRegs.CRS.Client_EBX = in->e.ebx;
- newRegs.CRS.Client_ECX = in->e.ecx;
- newRegs.CRS.Client_EDX = in->e.edx;
- newRegs.CRS.Client_ESI = in->e.esi;
- newRegs.CRS.Client_EDI = in->e.edi;
- newRegs.CRS.Client_ES = sregs->es;
- newRegs.CRS.Client_DS = sregs->ds;
- Restore_Client_State(&newRegs);
-}
-
-/****************************************************************************
-REMARKS:
-Read the V86 registers from the client state and restore the original state.
-****************************************************************************/
-static void ReadV86Registers(
- CLIENT_STRUCT *saveRegs,
- RMREGS *out,
- RMSREGS *sregs)
-{
- CLIENT_STRUCT newRegs;
-
- Save_Client_State(&newRegs);
- out->e.eax = newRegs.CRS.Client_EAX;
- out->e.ebx = newRegs.CRS.Client_EBX;
- out->e.ecx = newRegs.CRS.Client_ECX;
- out->e.edx = newRegs.CRS.Client_EDX;
- out->e.esi = newRegs.CRS.Client_ESI;
- out->e.edi = newRegs.CRS.Client_EDI;
- sregs->es = newRegs.CRS.Client_ES;
- sregs->ds = newRegs.CRS.Client_DS;
- Restore_Client_State(saveRegs);
-}
-
-/****************************************************************************
-REMARKS:
-Call a V86 real mode function with the specified register values
-loaded before the call. The call returns with a far ret.
-****************************************************************************/
-void PMAPI PM_callRealMode(
- uint seg,
- uint off,
- RMREGS *regs,
- RMSREGS *sregs)
-{
- CLIENT_STRUCT saveRegs;
-
- /* Bail if we do not have BIOS access (ie: the VxD was dynamically
- * loaded, and not statically loaded.
- */
- if (!_PM_haveBIOS)
- return;
-
- _TRACE("SDDHELP: Entering PM_callRealMode()\n");
- Begin_Nest_V86_Exec();
- LoadV86Registers(&saveRegs,regs,sregs);
- Simulate_Far_Call(seg, off);
- Resume_Exec();
- ReadV86Registers(&saveRegs,regs,sregs);
- End_Nest_Exec();
- _TRACE("SDDHELP: Exiting PM_callRealMode()\n");
-}
-
-/****************************************************************************
-REMARKS:
-Issue a V86 real mode interrupt with the specified register values
-loaded before the interrupt.
-****************************************************************************/
-int PMAPI PM_int86(
- int intno,
- RMREGS *in,
- RMREGS *out)
-{
- RMSREGS sregs = {0};
- CLIENT_STRUCT saveRegs;
- ushort oldDisable;
-
- /* Bail if we do not have BIOS access (ie: the VxD was dynamically
- * loaded, and not statically loaded.
- */
- if (!_PM_haveBIOS) {
- *out = *in;
- return out->x.ax;
- }
-
- /* Disable pass-up to our VxD handler so we directly call BIOS */
- _TRACE("SDDHELP: Entering PM_int86()\n");
- if (disableTSRFlag) {
- oldDisable = *disableTSRFlag;
- *disableTSRFlag = 0;
- }
- Begin_Nest_V86_Exec();
- LoadV86Registers(&saveRegs,in,&sregs);
- Exec_Int(intno);
- ReadV86Registers(&saveRegs,out,&sregs);
- End_Nest_Exec();
-
- /* Re-enable pass-up to our VxD handler if previously enabled */
- if (disableTSRFlag)
- *disableTSRFlag = oldDisable;
-
- _TRACE("SDDHELP: Exiting PM_int86()\n");
- return out->x.ax;
-}
-
-/****************************************************************************
-REMARKS:
-Issue a V86 real mode interrupt with the specified register values
-loaded before the interrupt.
-****************************************************************************/
-int PMAPI PM_int86x(
- int intno,
- RMREGS *in,
- RMREGS *out,
- RMSREGS *sregs)
-{
- CLIENT_STRUCT saveRegs;
- ushort oldDisable;
-
- /* Bail if we do not have BIOS access (ie: the VxD was dynamically
- * loaded, and not statically loaded.
- */
- if (!_PM_haveBIOS) {
- *out = *in;
- return out->x.ax;
- }
-
- /* Disable pass-up to our VxD handler so we directly call BIOS */
- _TRACE("SDDHELP: Entering PM_int86x()\n");
- if (disableTSRFlag) {
- oldDisable = *disableTSRFlag;
- *disableTSRFlag = 0;
- }
- Begin_Nest_V86_Exec();
- LoadV86Registers(&saveRegs,in,sregs);
- Exec_Int(intno);
- ReadV86Registers(&saveRegs,out,sregs);
- End_Nest_Exec();
-
- /* Re-enable pass-up to our VxD handler if previously enabled */
- if (disableTSRFlag)
- *disableTSRFlag = oldDisable;
-
- _TRACE("SDDHELP: Exiting PM_int86x()\n");
- return out->x.ax;
-}
-
-/****************************************************************************
-REMARKS:
-Returns available memory. Not possible under Windows.
-****************************************************************************/
-void PMAPI PM_availableMemory(
- ulong *physical,
- ulong *total)
-{
- *physical = *total = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Allocates a block of locked physical memory.
-****************************************************************************/
-void * PMAPI PM_allocLockedMem(
- uint size,
- ulong *physAddr,
- ibool contiguous,
- ibool below16M)
-{
- MEMHANDLE hMem;
- DWORD nPages = (size + 0xFFF) >> 12;
- DWORD flags = PAGEFIXED | PAGEUSEALIGN | (contiguous ? PAGECONTIG : 0);
- DWORD maxPhys = below16M ? 0x00FFFFFF : 0xFFFFFFFF;
- void *p;
-
- /* TODO: This may need to be modified if the memory needs to be globally */
- /* accessible. Check how we implemented PM_mallocShared() as we */
- /* may need to do something similar in here. */
- PageAllocate(nPages,PG_SYS,0,0,0,maxPhys,physAddr,flags,&hMem,&p);
-
- /* TODO: We may need to modify the memory blocks to disable caching via */
- /* the page tables (PCD|PWT) since DMA memory blocks *cannot* be */
- /* cached! */
- return p;
-}
-
-/****************************************************************************
-REMARKS:
-Frees a block of locked physical memory.
-****************************************************************************/
-void PMAPI PM_freeLockedMem(
- void *p,
- uint size,
- ibool contiguous)
-{
- if (p)
- PageFree((ulong)p,0);
-}
-
-/****************************************************************************
-REMARKS:
-Allocates a page aligned and page sized block of memory
-****************************************************************************/
-void * PMAPI PM_allocPage(
- ibool locked)
-{
- MEMHANDLE hMem;
- void *p;
-
- /* TODO: This will need to be modified if the memory needs to be globally */
- /* accessible. Check how we implemented PM_mallocShared() as we */
- /* may need to do something similar in here. */
- PageAllocate(1,PG_SYS,0,0,0,0,0,PAGEFIXED,&hMem,&p);
- return p;
-}
-
-/****************************************************************************
-REMARKS:
-Free a page aligned and page sized block of memory
-****************************************************************************/
-void PMAPI PM_freePage(
- void *p)
-{
- if (p)
- PageFree((ulong)p,0);
-}
-
-/****************************************************************************
-REMARKS:
-Lock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_lockDataPages(
- void *p,
- uint len,
- PM_lockHandle *lh)
-{
- DWORD pgNum = (ulong)p >> 12;
- DWORD nPages = (len + (ulong)p - (pgNum << 12) + 0xFFF) >> 12;
- return LinPageLock(pgNum,nPages,0);
-}
-
-/****************************************************************************
-REMARKS:
-Unlock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_unlockDataPages(
- void *p,
- uint len,
- PM_lockHandle *lh)
-{
- DWORD pgNum = (ulong)p >> 12;
- DWORD nPages = (len + (ulong)p - (pgNum << 12) + 0xFFF) >> 12;
- return LinPageUnLock(pgNum,nPages,0);
-}
-
-/****************************************************************************
-REMARKS:
-Lock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_lockCodePages(
- void (*p)(),
- uint len,
- PM_lockHandle *lh)
-{
- return PM_lockDataPages((void*)p,len,lh);
-}
-
-/****************************************************************************
-REMARKS:
-Unlock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_unlockCodePages(
- void (*p)(),
- uint len,
- PM_lockHandle *lh)
-{
- return PM_unlockDataPages((void*)p,len,lh);
-}
-
-/****************************************************************************
-REMARKS:
-Set the real time clock frequency (for stereo modes).
-****************************************************************************/
-void PMAPI PM_setRealTimeClockFrequency(
- int frequency)
-{
- static short convert[] = {
- 8192,
- 4096,
- 2048,
- 1024,
- 512,
- 256,
- 128,
- 64,
- 32,
- 16,
- 8,
- 4,
- 2,
- -1,
- };
- int i;
-
- /* First clear any pending RTC timeout if not cleared */
- _PM_readCMOS(0x0C);
- if (frequency == 0) {
- /* Disable RTC timout */
- _PM_writeCMOS(0x0A,_PM_oldCMOSRegA);
- _PM_writeCMOS(0x0B,_PM_oldCMOSRegB & 0x0F);
- }
- else {
- /* Convert frequency value to RTC clock indexes */
- for (i = 0; convert[i] != -1; i++) {
- if (convert[i] == frequency)
- break;
- }
-
- /* Set RTC timout value and enable timeout */
- _PM_writeCMOS(0x0A,0x20 | (i+3));
- _PM_writeCMOS(0x0B,(_PM_oldCMOSRegB & 0x0F) | 0x40);
- }
-}
-
-/****************************************************************************
-REMARKS:
-Real time clock interrupt handler, which calls the user registered C code.
-****************************************************************************/
-static BOOL __stdcall RTCInt_Handler(
- VMHANDLE hVM,
- IRQHANDLE hIRQ)
-{
- static char inside = 0;
-
- /* Clear priority interrupt controller and re-enable interrupts so we
- * dont lock things up for long.
- */
- VPICD_Phys_EOI(hIRQ);
-
- /* Clear real-time clock timeout */
- _PM_readCMOS(0x0C);
-
- /* Now call the C based interrupt handler (but check for mutual
- * exclusion since we may still be servicing an old interrupt when a
- * new one comes along; if that happens we ignore the old one).
- */
- if (!inside) {
- inside = 1;
- enable();
- _PM_rtcHandler();
- inside = 0;
- }
- return TRUE;
-}
-
-/****************************************************************************
-REMARKS:
-Set the real time clock handler (used for software stereo modes).
-****************************************************************************/
-ibool PMAPI PM_setRealTimeClockHandler(
- PM_intHandler ih,
- int frequency)
-{
- struct VPICD_IRQ_Descriptor IRQdesc;
-
- /* Save the old CMOS real time clock values */
- _PM_oldCMOSRegA = _PM_readCMOS(0x0A);
- _PM_oldCMOSRegB = _PM_readCMOS(0x0B);
-
- /* Set the real time clock interrupt handler */
- CHECK(ih != NULL);
- _PM_rtcHandler = ih;
- IRQdesc.VID_IRQ_Number = 0x8;
- IRQdesc.VID_Options = 0;
- IRQdesc.VID_Hw_Int_Proc = (DWORD)VPICD_Thunk_HWInt(RTCInt_Handler, &RTCInt_Thunk);
- IRQdesc.VID_EOI_Proc = 0;
- IRQdesc.VID_Virt_Int_Proc = 0;
- IRQdesc.VID_Mask_Change_Proc= 0;
- IRQdesc.VID_IRET_Proc = 0;
- IRQdesc.VID_IRET_Time_Out = 500;
- if ((RTCIRQHandle = VPICD_Virtualize_IRQ(&IRQdesc)) == 0)
- return false;
-
- /* Program the real time clock default frequency */
- PM_setRealTimeClockFrequency(frequency);
-
- /* Unmask IRQ8 in the PIC */
- VPICD_Physically_Unmask(RTCIRQHandle);
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-Restore the original real time clock handler.
-****************************************************************************/
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
- if (RTCIRQHandle) {
- /* Restore CMOS registers and mask RTC clock */
- _PM_writeCMOS(0x0A,_PM_oldCMOSRegA);
- _PM_writeCMOS(0x0B,_PM_oldCMOSRegB);
-
- /* Restore the interrupt vector */
- VPICD_Set_Auto_Masking(RTCIRQHandle);
- VPICD_Force_Default_Behavior(RTCIRQHandle);
- RTCIRQHandle = 0;
- }
-}
-
-/****************************************************************************
-REMARKS:
-OS specific shared libraries not supported inside a VxD
-****************************************************************************/
-PM_MODULE PMAPI PM_loadLibrary(
- const char *szDLLName)
-{
- (void)szDLLName;
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-OS specific shared libraries not supported inside a VxD
-****************************************************************************/
-void * PMAPI PM_getProcAddress(
- PM_MODULE hModule,
- const char *szProcName)
-{
- (void)hModule;
- (void)szProcName;
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-OS specific shared libraries not supported inside a VxD
-****************************************************************************/
-void PMAPI PM_freeLibrary(
- PM_MODULE hModule)
-{
- (void)hModule;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-void *PMAPI PM_findFirstFile(
- const char *filename,
- PM_findData *findData)
-{
- /* TODO: This function should start a directory enumeration search */
- /* given the filename (with wildcards). The data should be */
- /* converted and returned in the findData standard form. */
- (void)filename;
- (void)findData;
- return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
- void *handle,
- PM_findData *findData)
-{
- /* TODO: This function should find the next file in directory enumeration */
- /* search given the search criteria defined in the call to */
- /* PM_findFirstFile. The data should be converted and returned */
- /* in the findData standard form. */
- (void)handle;
- (void)findData;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
- void *handle)
-{
- /* TODO: This function should close the find process. This may do */
- /* nothing for some OS'es. */
- (void)handle;
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
- 1 - Drive A:
- 2 - Drive B:
- 3 - Drive C:
- etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
- char drive)
-{
- /* Not supported in a VxD */
- (void)drive;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
- int drive,
- char *dir,
- int len)
-{
- /* Not supported in a VxD */
- (void)drive;
- (void)dir;
- (void)len;
-}
-
-/****************************************************************************
-PARAMETERS:
-base - The starting physical base address of the region
-size - The size in bytes of the region
-type - Type to place into the MTRR register
-
-RETURNS:
-Error code describing the result.
-
-REMARKS:
-Function to enable write combining for the specified region of memory.
-****************************************************************************/
-int PMAPI PM_enableWriteCombine(
- ulong base,
- ulong size,
- uint type)
-{
- return MTRR_enableWriteCombine(base,size,type);
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
- const char *filename,
- uint attrib)
-{
- /* TODO: Implement this */
- (void)filename;
- (void)attrib;
- PM_fatalError("PM_setFileAttr not implemented yet!");
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file attributes for a specific file.
-****************************************************************************/
-uint PMAPI PM_getFileAttr(
- const char *filename)
-{
- /* TODO: Implement this */
- (void)filename;
- PM_fatalError("PM_getFileAttr not implemented yet!");
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Function to create a directory.
-****************************************************************************/
-ibool PMAPI PM_mkdir(
- const char *filename)
-{
- /* TODO: Implement this */
- (void)filename;
- PM_fatalError("PM_mkdir not implemented yet!");
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to remove a directory.
-****************************************************************************/
-ibool PMAPI PM_rmdir(
- const char *filename)
-{
- /* TODO: Implement this */
- (void)filename;
- PM_fatalError("PM_rmdir not implemented yet!");
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_getFileTime(
- const char *filename,
- ibool gmTime,
- PM_time *time)
-{
- /* TODO: Implement this! */
- (void)filename;
- (void)gmTime;
- (void)time;
- PM_fatalError("PM_getFileTime not implemented yet!");
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to set the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_setFileTime(
- const char *filename,
- ibool gmTime,
- PM_time *time)
-{
- /* TODO: Implement this! */
- (void)filename;
- (void)gmTime;
- (void)time;
- PM_fatalError("PM_setFileTime not implemented yet!");
- return false;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vxd/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/vxd/vflat.c
deleted file mode 100644
index 901ce1cf03..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vxd/vflat.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-ibool PMAPI VF_available(void)
-{
- return false;
-}
-
-void * PMAPI VF_init(ulong baseAddr,int bankSize,int codeLen,void *bankFunc)
-{
- return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/vxd/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/vxd/ztimer.c
deleted file mode 100644
index 76df48c38b..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/vxd/ztimer.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: 32-bit Windows VxD
-*
-* Description: OS specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-/*---------------------------- Global variables ---------------------------*/
-
-static ulong frequency = 1193180;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-#define __ZTimerInit()
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOn(tm) VTD_Get_Real_Time(&tm->start.high,&tm->start.low)
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-static ulong __LZTimerLap(
- LZTimerObject *tm)
-{
- CPU_largeInteger lap,count;
- VTD_Get_Real_Time(&lap.high,&lap.low);
- _CPU_diffTime64(&tm->start,&lap,&count);
- return _CPU_calcMicroSec(&count,frequency);
-}
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-#define __LZTimerOff(tm) VTD_Get_Real_Time(&tm->end.high,&tm->end.low)
-
-/****************************************************************************
-REMARKS:
-Call the assembler Zen Timer functions to do the timing.
-****************************************************************************/
-static ulong __LZTimerCount(
- LZTimerObject *tm)
-{
- CPU_largeInteger tmCount;
- _CPU_diffTime64(&tm->start,&tm->end,&tmCount);
- return _CPU_calcMicroSec(&tmCount,frequency);
-}
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION 1000
-
-/****************************************************************************
-REMARKS:
-Read the Long Period timer value from the BIOS timer tick.
-****************************************************************************/
-static ulong __ULZReadTime(void)
-{
- CPU_largeInteger count;
- VTD_Get_Real_Time(&count.high,&count.low);
- return (count.low * 1000.0 / frequency);
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{ return finish - start; }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/win32/_pmwin32.asm b/board/MAI/bios_emulator/scitech/src/pm/win32/_pmwin32.asm
deleted file mode 100644
index 7c242b5724..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/win32/_pmwin32.asm
+++ /dev/null
@@ -1,78 +0,0 @@
-;****************************************************************************
-;*
-;* SciTech OS Portability Manager Library
-;*
-;* ========================================================================
-;*
-;* The contents of this file are subject to the SciTech MGL Public
-;* License Version 1.0 (the "License"); you may not use this file
-;* except in compliance with the License. You may obtain a copy of
-;* the License at http://www.scitechsoft.com/mgl-license.txt
-;*
-;* Software distributed under the License is distributed on an
-;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-;* implied. See the License for the specific language governing
-;* rights and limitations under the License.
-;*
-;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-;*
-;* The Initial Developer of the Original Code is SciTech Software, Inc.
-;* All Rights Reserved.
-;*
-;* ========================================================================
-;*
-;* Language: 80386 Assembler, TASM 4.0 or NASM
-;* Environment: Win32
-;*
-;* Description: Low level assembly support for the PM library specific
-;* to Windows.
-;*
-;****************************************************************************
-
- IDEAL
-
-include "scitech.mac" ; Memory model macros
-
-header _pmwin32 ; Set up memory model
-
-begdataseg _pmwin32
-
- cglobal _PM_ioentry
- cglobal _PM_gdt
-_PM_ioentry dd 0 ; Offset to call gate
-_PM_gdt dw 0 ; Selector to call gate
-
-enddataseg _pmwin32
-
-begcodeseg _pmwin32 ; Start of code segment
-
-;----------------------------------------------------------------------------
-; int PM_setIOPL(int iopl)
-;----------------------------------------------------------------------------
-; Change the IOPL level for the 32-bit task. Returns the previous level
-; so it can be restored for the task correctly.
-;----------------------------------------------------------------------------
-cprocstart _PM_setIOPLViaCallGate
-
- ARG iopl:UINT
-
- enter_c
- pushfd ; Save the old EFLAGS for later
- mov ecx,[iopl] ; ECX := IOPL level
- xor ebx,ebx ; Change IOPL level function code
-ifdef USE_NASM
- call far dword [_PM_ioentry]
-else
- call [FWORD _PM_ioentry]
-endif
- pop eax
- and eax,0011000000000000b
- shr eax,12
- leave_c
- ret
-
-cprocend
-
-endcodeseg _pmwin32
-
- END ; End of module
diff --git a/board/MAI/bios_emulator/scitech/src/pm/win32/cpuinfo.c b/board/MAI/bios_emulator/scitech/src/pm/win32/cpuinfo.c
deleted file mode 100644
index 7da9752051..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/win32/cpuinfo.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Win32
-*
-* Description: Module to implement OS specific services to measure the
-* CPU frequency.
-*
-****************************************************************************/
-
-/*---------------------------- Global variables ---------------------------*/
-
-static ibool havePerformanceCounter;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Increase the thread priority to maximum, if possible.
-****************************************************************************/
-static int SetMaxThreadPriority(void)
-{
- int oldPriority;
- HANDLE hThread = GetCurrentThread();
-
- oldPriority = GetThreadPriority(hThread);
- if (oldPriority != THREAD_PRIORITY_ERROR_RETURN)
- SetThreadPriority(hThread, THREAD_PRIORITY_TIME_CRITICAL);
- return oldPriority;
-}
-
-/****************************************************************************
-REMARKS:
-Restore the original thread priority.
-****************************************************************************/
-static void RestoreThreadPriority(
- int oldPriority)
-{
- HANDLE hThread = GetCurrentThread();
-
- if (oldPriority != THREAD_PRIORITY_ERROR_RETURN)
- SetThreadPriority(hThread, oldPriority);
-}
-
-/****************************************************************************
-REMARKS:
-Initialise the counter and return the frequency of the counter.
-****************************************************************************/
-static void GetCounterFrequency(
- CPU_largeInteger *freq)
-{
- if (!QueryPerformanceFrequency((LARGE_INTEGER*)freq)) {
- havePerformanceCounter = false;
- freq->low = 100000;
- freq->high = 0;
- }
- else
- havePerformanceCounter = true;
-}
-
-/****************************************************************************
-REMARKS:
-Read the counter and return the counter value.
-****************************************************************************/
-#define GetCounter(t) \
-{ \
- if (havePerformanceCounter) \
- QueryPerformanceCounter((LARGE_INTEGER*)t); \
- else { \
- (t)->low = timeGetTime() * 100; \
- (t)->high = 0; \
- } \
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/win32/ddraw.c b/board/MAI/bios_emulator/scitech/src/pm/win32/ddraw.c
deleted file mode 100644
index d6c3f60e84..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/win32/ddraw.c
+++ /dev/null
@@ -1,582 +0,0 @@
-/****************************************************************************
-*
-* SciTech Multi-platform Graphics Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Win32
-*
-* Description: Win32 implementation for the SciTech cross platform
-* event library.
-*
-****************************************************************************/
-
-#include "event.h"
-#include "pmapi.h"
-#include "win32/oshdr.h"
-#include "nucleus/graphics.h"
-
-/*---------------------------- Global Variables ---------------------------*/
-
-/* Publicly accessible variables */
-
-int _PM_deskX,_PM_deskY;/* Desktop dimentions */
-HWND _PM_hwndConsole; /* Window handle for console */
-#ifdef __INTEL__
-uint _PM_cw_default; /* Default FPU control word */
-#endif
-
-/* Private internal variables */
-
-static HINSTANCE hInstApp = NULL;/* Application instance handle */
-static HWND hwndUser = NULL;/* User window handle */
-static HINSTANCE hInstDD = NULL; /* Handle to DirectDraw DLL */
-static LPDIRECTDRAW lpDD = NULL; /* DirectDraw object */
-static LONG oldWndStyle; /* Info about old user window */
-static LONG oldExWndStyle; /* Info about old user window */
-static int oldWinPosX; /* Old window position X coordinate */
-static int oldWinPosY; /* Old window pisition Y coordinate */
-static int oldWinSizeX; /* Old window size X */
-static int oldWinSizeY; /* Old window size Y */
-static WNDPROC oldWinProc = NULL;
-static PM_saveState_cb suspendApp = NULL;
-static ibool waitActive = false;
-static ibool isFullScreen = false;
-static ibool backInGDI = false;
-
-/* Internal strings */
-
-static char *szWinClassName = "SciTechDirectDrawWindow";
-static char *szAutoPlayKey = "Software\\Microsoft\\Windows\\CurrentVersion\\Policies\\Explorer";
-static char *szAutoPlayValue = "NoDriveTypeAutoRun";
-
-/* Dynalinks to DirectDraw functions */
-
-static HRESULT (WINAPI *pDirectDrawCreate)(GUID FAR *lpGUID, LPDIRECTDRAW FAR *lplpDD, IUnknown FAR *pUnkOuter);
-
-/*---------------------------- Implementation -----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Temporarily disables AutoPlay operation while we are running in fullscreen
-graphics modes.
-****************************************************************************/
-static void DisableAutoPlay(void)
-{
- DWORD dwAutoPlay,dwSize = sizeof(dwAutoPlay);
- HKEY hKey;
-
- if (RegOpenKeyEx(HKEY_CURRENT_USER,szAutoPlayKey,0,KEY_EXECUTE | KEY_WRITE,&hKey) == ERROR_SUCCESS) {
- RegQueryValueEx(hKey,szAutoPlayValue,NULL,NULL,(void*)&dwAutoPlay,&dwSize);
- dwAutoPlay |= AUTOPLAY_DRIVE_CDROM;
- RegSetValueEx(hKey,szAutoPlayValue,0,REG_DWORD,(void*)&dwAutoPlay,dwSize);
- RegCloseKey(hKey);
- }
-}
-
-/****************************************************************************
-REMARKS:
-Re-enables AutoPlay operation when we return to regular GDI mode.
-****************************************************************************/
-static void RestoreAutoPlay(void)
-{
- DWORD dwAutoPlay,dwSize = sizeof(dwAutoPlay);
- HKEY hKey;
-
- if (RegOpenKeyEx(HKEY_CURRENT_USER,szAutoPlayKey,0,KEY_EXECUTE | KEY_WRITE,&hKey) == ERROR_SUCCESS) {
- RegQueryValueEx(hKey,szAutoPlayValue,NULL,NULL,(void*)&dwAutoPlay,&dwSize);
- dwAutoPlay &= ~AUTOPLAY_DRIVE_CDROM;
- RegSetValueEx(hKey,szAutoPlayValue,0,REG_DWORD,(void*)&dwAutoPlay,dwSize);
- RegCloseKey(hKey);
- }
-}
-
-/****************************************************************************
-REMARKS:
-Suspends the application by switching back to the GDI desktop, allowing
-normal application code to be processed, and then waiting for the
-application activate command to bring us back to fullscreen mode with our
-window minimised.
-****************************************************************************/
-static void LeaveFullScreen(void)
-{
- int retCode = PM_SUSPEND_APP;
-
- if (backInGDI)
- return;
- if (suspendApp)
- retCode = suspendApp(PM_DEACTIVATE);
- RestoreAutoPlay();
- backInGDI = true;
-
- /* Now process messages normally until we are re-activated */
- waitActive = true;
- if (retCode != PM_NO_SUSPEND_APP) {
- while (waitActive) {
- _EVT_pumpMessages();
- Sleep(200);
- }
- }
-}
-
-/****************************************************************************
-REMARKS:
-Reactivate all the surfaces for DirectDraw and set the system back up for
-fullscreen rendering.
-****************************************************************************/
-static void RestoreFullScreen(void)
-{
- static ibool firstTime = true;
-
- if (firstTime) {
- /* Clear the message queue while waiting for the surfaces to be
- * restored.
- */
- firstTime = false;
- while (1) {
- /* Continue looping until out application has been restored
- * and we have reset the display mode.
- */
- _EVT_pumpMessages();
- if (GetActiveWindow() == _PM_hwndConsole) {
- if (suspendApp)
- suspendApp(PM_REACTIVATE);
- DisableAutoPlay();
- backInGDI = false;
- waitActive = false;
- firstTime = true;
- return;
- }
- Sleep(200);
- }
- }
-}
-
-/****************************************************************************
-REMARKS:
-This function suspends the application by switching back to the GDI desktop,
-allowing normal application code to be processed and then waiting for the
-application activate command to bring us back to fullscreen mode with our
-window minimised.
-
-This version only gets called if we have not captured the screen switch in
-our activate message loops and will occur if the DirectDraw drivers lose a
-surface for some reason while rendering. This should not normally happen,
-but it is included just to be sure (it can happen on WinNT/2000 if the user
-hits the Ctrl-Alt-Del key combination). Note that this code will always
-spin loop, and we cannot disable the spin looping from this version (ie:
-if the user hits Ctrl-Alt-Del under WinNT/2000 the application main loop
-will cease to be executed until the user switches back to the application).
-****************************************************************************/
-void PMAPI PM_doSuspendApp(void)
-{
- static ibool firstTime = true;
-
- /* Call system DLL version if found */
- if (_PM_imports.PM_doSuspendApp != PM_doSuspendApp) {
- _PM_imports.PM_doSuspendApp();
- return;
- }
-
- if (firstTime) {
- if (suspendApp)
- suspendApp(PM_DEACTIVATE);
- RestoreAutoPlay();
- firstTime = false;
- backInGDI = true;
- }
- RestoreFullScreen();
- firstTime = true;
-}
-
-/****************************************************************************
-REMARKS:
-Main Window proc for the full screen DirectDraw Window that we create while
-running in full screen mode. Here we capture all mouse and keyboard events
-for the window and plug them into our event queue.
-****************************************************************************/
-static LONG CALLBACK PM_winProc(
- HWND hwnd,
- UINT msg,
- WPARAM wParam,
- LONG lParam)
-{
- switch (msg) {
- case WM_SYSCHAR:
- /* Stop Alt-Space from pausing our application */
- return 0;
- case WM_KEYDOWN:
- case WM_SYSKEYDOWN:
- if (HIWORD(lParam) & KF_REPEAT) {
- if (msg == WM_SYSKEYDOWN)
- return 0;
- break;
- }
- /* Fall through for keydown events */
- case WM_KEYUP:
- case WM_SYSKEYUP:
- if (msg == WM_SYSKEYDOWN || msg == WM_SYSKEYUP) {
- if ((HIWORD(lParam) & KF_ALTDOWN) && wParam == VK_RETURN)
- break;
- /* We ignore the remainder of the system keys to stop the
- * system menu from being activated from the keyboard and pausing
- * our app while fullscreen (ie: pressing the Alt key).
- */
- return 0;
- }
- break;
- case WM_SYSCOMMAND:
- switch (wParam & ~0x0F) {
- case SC_SCREENSAVE:
- case SC_MONITORPOWER:
- /* Ignore screensaver requests in fullscreen modes */
- return 0;
- }
- break;
- case WM_SIZE:
- if (waitActive && backInGDI && (wParam != SIZE_MINIMIZED)) {
- /* Start the re-activation process */
- PostMessage(hwnd,WM_DO_SUSPEND_APP,WM_PM_RESTORE_FULLSCREEN,0);
- }
- else if (!waitActive && isFullScreen && !backInGDI && (wParam == SIZE_MINIMIZED)) {
- /* Start the de-activation process */
- PostMessage(hwnd,WM_DO_SUSPEND_APP,WM_PM_LEAVE_FULLSCREEN,0);
- }
- break;
- case WM_DO_SUSPEND_APP:
- switch (wParam) {
- case WM_PM_RESTORE_FULLSCREEN:
- RestoreFullScreen();
- break;
- case WM_PM_LEAVE_FULLSCREEN:
- LeaveFullScreen();
- break;
- }
- return 0;
- }
- if (oldWinProc)
- return oldWinProc(hwnd,msg,wParam,lParam);
- return DefWindowProc(hwnd,msg,wParam,lParam);
-}
-
-/****************************************************************************
-PARAMETERS:
-hwnd - User window to convert
-width - Window of the fullscreen window
-height - Height of the fullscreen window
-
-RETURNS:
-Handle to converted fullscreen Window.
-
-REMARKS:
-This function takes the original user window handle and modifies the size,
-position and attributes for the window to convert it into a fullscreen
-window that we can use.
-****************************************************************************/
-static PM_HWND _PM_convertUserWindow(
- HWND hwnd,
- int width,
- int height)
-{
- RECT window;
-
- GetWindowRect(hwnd,&window);
- oldWinPosX = window.left;
- oldWinPosY = window.top;
- oldWinSizeX = window.right - window.left;
- oldWinSizeY = window.bottom - window.top;
- oldWndStyle = SetWindowLong(hwnd,GWL_STYLE,WS_POPUP | WS_SYSMENU);
- oldExWndStyle = SetWindowLong(hwnd,GWL_EXSTYLE,WS_EX_APPWINDOW);
- ShowWindow(hwnd,SW_SHOW);
- MoveWindow(hwnd,0,0,width,height,TRUE);
- SetWindowPos(hwnd,HWND_TOPMOST,0,0,0,0,SWP_NOMOVE | SWP_NOSIZE);
- oldWinProc = (WNDPROC)SetWindowLong(hwnd,GWL_WNDPROC, (LPARAM)PM_winProc);
- return hwnd;
-}
-
-/****************************************************************************
-PARAMETERS:
-hwnd - User window to restore
-
-REMARKS:
-This function restores the original attributes of the user window and put's
-it back into it's original state before it was converted to a fullscreen
-window.
-****************************************************************************/
-static void _PM_restoreUserWindow(
- HWND hwnd)
-{
- SetWindowLong(hwnd,GWL_WNDPROC, (LPARAM)oldWinProc);
- SetWindowLong(hwnd,GWL_EXSTYLE,oldExWndStyle);
- SetWindowLong(hwnd,GWL_STYLE,oldWndStyle);
- SetWindowPos(hwnd,HWND_NOTOPMOST,0,0,0,0,SWP_NOMOVE | SWP_NOSIZE);
- ShowWindow(hwnd,SW_SHOW);
- MoveWindow(hwnd,oldWinPosX,oldWinPosY,oldWinSizeX,oldWinSizeY,TRUE);
- oldWinProc = NULL;
-}
-
-/****************************************************************************
-PARAMETERS:
-device - Index of the device to load DirectDraw for (0 for primary)
-
-REMARKS:
-Attempts to dynamically load the DirectDraw DLL's and create the DirectDraw
-objects that we need.
-****************************************************************************/
-void * PMAPI PM_loadDirectDraw(
- int device)
-{
- HDC hdc;
- int bits;
-
- /* Call system DLL version if found */
- if (_PM_imports.PM_loadDirectDraw != PM_loadDirectDraw)
- return _PM_imports.PM_loadDirectDraw(device);
-
- /* TODO: Handle multi-monitor!! */
- if (device != 0)
- return NULL;
-
- /* Load the DirectDraw DLL if not presently loaded */
- GET_DEFAULT_CW();
- if (!hInstDD) {
- hdc = GetDC(NULL);
- bits = GetDeviceCaps(hdc,BITSPIXEL);
- ReleaseDC(NULL,hdc);
- if (bits < 8)
- return NULL;
- if ((hInstDD = LoadLibrary("ddraw.dll")) == NULL)
- return NULL;
- pDirectDrawCreate = (void*)GetProcAddress(hInstDD,"DirectDrawCreate");
- if (!pDirectDrawCreate)
- return NULL;
- }
-
- /* Create the DirectDraw object */
- if (!lpDD && pDirectDrawCreate(NULL, &lpDD, NULL) != DD_OK) {
- lpDD = NULL;
- return NULL;
- }
- RESET_DEFAULT_CW();
- return lpDD;
-}
-
-/****************************************************************************
-PARAMETERS:
-device - Index of the device to unload DirectDraw for (0 for primary)
-
-REMARKS:
-Frees any DirectDraw objects for the device. We never actually explicitly
-unload the ddraw.dll library, since unloading and reloading it is
-unnecessary since we only want to unload it when the application exits and
-that happens automatically.
-****************************************************************************/
-void PMAPI PM_unloadDirectDraw(
- int device)
-{
- /* Call system DLL version if found */
- if (_PM_imports.PM_unloadDirectDraw != PM_unloadDirectDraw) {
- _PM_imports.PM_unloadDirectDraw(device);
- return;
- }
- if (lpDD) {
- IDirectDraw_Release(lpDD);
- lpDD = NULL;
- }
- (void)device;
-}
-
-/****************************************************************************
-REMARKS:
-Open a console for output to the screen, creating the main event handling
-window if necessary.
-****************************************************************************/
-PM_HWND PMAPI PM_openConsole(
- PM_HWND hWndUser,
- int device,
- int xRes,
- int yRes,
- int bpp,
- ibool fullScreen)
-{
- WNDCLASS cls;
- static ibool classRegistered = false;
-
- /* Call system DLL version if found */
- GA_getSystemPMImports();
- if (_PM_imports.PM_openConsole != PM_openConsole) {
- if (fullScreen) {
- _PM_deskX = xRes;
- _PM_deskY = yRes;
- }
- return _PM_imports.PM_openConsole(hWndUser,device,xRes,yRes,bpp,fullScreen);
- }
-
- /* Create the fullscreen window if necessary */
- hwndUser = hWndUser;
- if (fullScreen) {
- if (!classRegistered) {
- /* Create a Window class for the fullscreen window in here, since
- * we need to register one that will do all our event handling for
- * us.
- */
- hInstApp = GetModuleHandle(NULL);
- cls.hCursor = LoadCursor(NULL,IDC_ARROW);
- cls.hIcon = LoadIcon(hInstApp,MAKEINTRESOURCE(1));
- cls.lpszMenuName = NULL;
- cls.lpszClassName = szWinClassName;
- cls.hbrBackground = GetStockObject(BLACK_BRUSH);
- cls.hInstance = hInstApp;
- cls.style = CS_DBLCLKS;
- cls.lpfnWndProc = PM_winProc;
- cls.cbWndExtra = 0;
- cls.cbClsExtra = 0;
- if (!RegisterClass(&cls))
- return NULL;
- classRegistered = true;
- }
- _PM_deskX = xRes;
- _PM_deskY = yRes;
- if (!hwndUser) {
- char windowTitle[80];
- if (LoadString(hInstApp,1,windowTitle,sizeof(windowTitle)) == 0)
- strcpy(windowTitle,"MGL Fullscreen Application");
- _PM_hwndConsole = CreateWindowEx(WS_EX_APPWINDOW,szWinClassName,
- windowTitle,WS_POPUP | WS_SYSMENU,0,0,xRes,yRes,
- NULL,NULL,hInstApp,NULL);
- }
- else {
- _PM_hwndConsole = _PM_convertUserWindow(hwndUser,xRes,yRes);
- }
- ShowCursor(false);
- isFullScreen = true;
- }
- else {
- _PM_hwndConsole = hwndUser;
- isFullScreen = false;
- }
- SetFocus(_PM_hwndConsole);
- SetForegroundWindow(_PM_hwndConsole);
- DisableAutoPlay();
- (void)bpp;
- return _PM_hwndConsole;
-}
-
-/****************************************************************************
-REMARKS:
-Find the size of the console state buffer.
-****************************************************************************/
-int PMAPI PM_getConsoleStateSize(void)
-{
- /* Call system DLL version if found */
- if (_PM_imports.PM_getConsoleStateSize != PM_getConsoleStateSize)
- return _PM_imports.PM_getConsoleStateSize();
-
- /* Not used in Windows */
- return 1;
-}
-
-/****************************************************************************
-REMARKS:
-Save the state of the console.
-****************************************************************************/
-void PMAPI PM_saveConsoleState(
- void *stateBuf,
- PM_HWND hwndConsole)
-{
- /* Call system DLL version if found */
- if (_PM_imports.PM_saveConsoleState != PM_saveConsoleState) {
- _PM_imports.PM_saveConsoleState(stateBuf,hwndConsole);
- return;
- }
-
- /* Not used in Windows */
- (void)stateBuf;
- (void)hwndConsole;
-}
-
-/****************************************************************************
-REMARKS:
-Set the suspend application callback for the fullscreen console.
-****************************************************************************/
-void PMAPI PM_setSuspendAppCallback(
- PM_saveState_cb saveState)
-{
- /* Call system DLL version if found */
- if (_PM_imports.PM_setSuspendAppCallback != PM_setSuspendAppCallback) {
- _PM_imports.PM_setSuspendAppCallback(saveState);
- return;
- }
- suspendApp = saveState;
-}
-
-/****************************************************************************
-REMARKS:
-Restore the console state.
-****************************************************************************/
-void PMAPI PM_restoreConsoleState(
- const void *stateBuf,
- PM_HWND hwndConsole)
-{
- /* Call system DLL version if found */
- if (_PM_imports.PM_restoreConsoleState != PM_restoreConsoleState) {
- _PM_imports.PM_restoreConsoleState(stateBuf,hwndConsole);
- return;
- }
-
- /* Not used in Windows */
- (void)stateBuf;
- (void)hwndConsole;
-}
-
-/****************************************************************************
-REMARKS:
-Close the fullscreen console.
-****************************************************************************/
-void PMAPI PM_closeConsole(
- PM_HWND hwndConsole)
-{
- /* Call system DLL version if found */
- if (_PM_imports.PM_closeConsole != PM_closeConsole) {
- _PM_imports.PM_closeConsole(hwndConsole);
- return;
- }
- ShowCursor(true);
- RestoreAutoPlay();
- if (hwndUser)
- _PM_restoreUserWindow(hwndConsole);
- else
- DestroyWindow(hwndConsole);
- hwndUser = NULL;
- _PM_hwndConsole = NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Return the DirectDraw window handle used by the application.
-****************************************************************************/
-PM_HWND PMAPI PM_getDirectDrawWindow(void)
-{
- /* Call system DLL version if found */
- if (_PM_imports.PM_getDirectDrawWindow != PM_getDirectDrawWindow)
- return _PM_imports.PM_getDirectDrawWindow();
- return _PM_hwndConsole;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/win32/event.c b/board/MAI/bios_emulator/scitech/src/pm/win32/event.c
deleted file mode 100644
index 6388052ce7..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/win32/event.c
+++ /dev/null
@@ -1,459 +0,0 @@
-/****************************************************************************
-*
-* SciTech Multi-platform Graphics Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Win32
-*
-* Description: Win32 implementation for the SciTech cross platform
-* event library.
-*
-****************************************************************************/
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static ushort keyUpMsg[256] = {0}; /* Table of key up messages */
-static int rangeX,rangeY; /* Range of mouse coordinates */
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* These are not used under Win32 */
-#define _EVT_disableInt() 1
-#define _EVT_restoreInt(flags) (void)(flags)
-
-/****************************************************************************
-PARAMETERS:
-scanCode - Scan code to test
-
-REMARKS:
-This macro determines if a specified key is currently down at the
-time that the call is made.
-****************************************************************************/
-#define _EVT_isKeyDown(scanCode) (keyUpMsg[scanCode] != 0)
-
-/****************************************************************************
-REMARKS:
-This function is used to return the number of ticks since system
-startup in milliseconds. This should be the same value that is placed into
-the time stamp fields of events, and is used to implement auto mouse down
-events.
-****************************************************************************/
-ulong _EVT_getTicks(void)
-{ return timeGetTime(); }
-
-/****************************************************************************
-REMARKS:
-Pumps all messages in the message queue from Win32 into our event queue.
-****************************************************************************/
-void _EVT_pumpMessages(void)
-{
- MSG msg;
- MSG charMsg;
- event_t evt;
-
- /* TODO: Add support for DirectInput! We can't support relative mouse */
- /* movement motion counters without DirectInput ;-(. */
- while (PeekMessage(&msg,NULL,0,0,PM_REMOVE)) {
- memset(&evt,0,sizeof(evt));
- switch (msg.message) {
- case WM_MOUSEMOVE:
- evt.what = EVT_MOUSEMOVE;
- break;
- case WM_LBUTTONDBLCLK:
- evt.what = EVT_MOUSEDOWN;
- evt.message = EVT_LEFTBMASK | EVT_DBLCLICK;
- break;
- case WM_LBUTTONDOWN:
- evt.what = EVT_MOUSEDOWN;
- evt.message = EVT_LEFTBMASK;
- break;
- case WM_LBUTTONUP:
- evt.what = EVT_MOUSEUP;
- evt.message = EVT_LEFTBMASK;
- break;
- case WM_RBUTTONDBLCLK:
- evt.what = EVT_MOUSEDOWN | EVT_DBLCLICK;
- evt.message = EVT_RIGHTBMASK;
- break;
- case WM_RBUTTONDOWN:
- evt.what = EVT_MOUSEDOWN;
- evt.message = EVT_RIGHTBMASK;
- break;
- case WM_RBUTTONUP:
- evt.what = EVT_MOUSEUP;
- evt.message = EVT_RIGHTBMASK;
- break;
- case WM_MBUTTONDBLCLK:
- evt.what = EVT_MOUSEDOWN | EVT_DBLCLICK;
- evt.message = EVT_MIDDLEBMASK;
- break;
- case WM_MBUTTONDOWN:
- evt.what = EVT_MOUSEDOWN;
- evt.message = EVT_MIDDLEBMASK;
- break;
- case WM_MBUTTONUP:
- evt.what = EVT_MOUSEUP;
- evt.message = EVT_MIDDLEBMASK;
- break;
- case WM_KEYDOWN:
- case WM_SYSKEYDOWN:
- if (HIWORD(msg.lParam) & KF_REPEAT) {
- evt.what = EVT_KEYREPEAT;
- }
- else {
- evt.what = EVT_KEYDOWN;
- }
- break;
- case WM_KEYUP:
- case WM_SYSKEYUP:
- evt.what = EVT_KEYUP;
- break;
- }
-
- /* Convert mouse event modifier flags */
- if (evt.what & EVT_MOUSEEVT) {
- if (_PM_deskX) {
- evt.where_x = ((long)msg.pt.x * rangeX) / _PM_deskX;
- evt.where_y = ((long)msg.pt.y * rangeY) / _PM_deskY;
- }
- else {
- ScreenToClient(_PM_hwndConsole, &msg.pt);
- evt.where_x = msg.pt.x;
- evt.where_y = msg.pt.y;
- }
- if (evt.what == EVT_MOUSEMOVE) {
- /* Save the current mouse position */
- EVT.mx = evt.where_x;
- EVT.my = evt.where_y;
- if (EVT.oldMove != -1) {
- EVT.evtq[EVT.oldMove].where_x = evt.where_x;/* Modify existing one */
- EVT.evtq[EVT.oldMove].where_y = evt.where_y;
-/* EVT.evtq[EVT.oldMove].relative_x += mickeyX; / / TODO! */
-/* EVT.evtq[EVT.oldMove].relative_y += mickeyY; / / TODO! */
- evt.what = 0;
- }
- else {
- EVT.oldMove = EVT.freeHead; /* Save id of this move event */
-/* evt.relative_x = mickeyX; / / TODO! */
-/* evt.relative_y = mickeyY; / / TODO! */
- }
- }
- else
- EVT.oldMove = -1;
- if (msg.wParam & MK_LBUTTON)
- evt.modifiers |= EVT_LEFTBUT;
- if (msg.wParam & MK_RBUTTON)
- evt.modifiers |= EVT_RIGHTBUT;
- if (msg.wParam & MK_MBUTTON)
- evt.modifiers |= EVT_MIDDLEBUT;
- if (msg.wParam & MK_SHIFT)
- evt.modifiers |= EVT_SHIFTKEY;
- if (msg.wParam & MK_CONTROL)
- evt.modifiers |= EVT_CTRLSTATE;
- }
-
- /* Convert keyboard codes */
- TranslateMessage(&msg);
- if (evt.what & EVT_KEYEVT) {
- int scanCode = (msg.lParam >> 16) & 0xFF;
- if (evt.what == EVT_KEYUP) {
- /* Get message for keyup code from table of cached down values */
- evt.message = keyUpMsg[scanCode];
- keyUpMsg[scanCode] = 0;
- }
- else {
- if (PeekMessage(&charMsg,NULL,WM_CHAR,WM_CHAR,PM_REMOVE))
- evt.message = charMsg.wParam;
- if (PeekMessage(&charMsg,NULL,WM_SYSCHAR,WM_SYSCHAR,PM_REMOVE))
- evt.message = charMsg.wParam;
- evt.message |= ((msg.lParam >> 8) & 0xFF00);
- keyUpMsg[scanCode] = (ushort)evt.message;
- }
- if (evt.what == EVT_KEYREPEAT)
- evt.message |= (msg.lParam << 16);
- if (HIWORD(msg.lParam) & KF_ALTDOWN)
- evt.modifiers |= EVT_ALTSTATE;
- if (GetKeyState(VK_SHIFT) & 0x8000U)
- evt.modifiers |= EVT_SHIFTKEY;
- if (GetKeyState(VK_CONTROL) & 0x8000U)
- evt.modifiers |= EVT_CTRLSTATE;
- EVT.oldMove = -1;
- }
-
- if (evt.what != 0) {
- /* Add time stamp and add the event to the queue */
- evt.when = msg.time;
- if (EVT.count < EVENTQSIZE)
- addEvent(&evt);
- }
- DispatchMessage(&msg);
- }
-}
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-****************************************************************************/
-#define _EVT_maskKeyCode(evt)
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort(
- int signal)
-{
- (void)signal;
- EVT_exit();
- PM_fatalError("Unhandled exception!");
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-void EVTAPI EVT_init(
- _EVT_mouseMoveHandler mouseMove)
-{
- /* Initialise the event queue */
- EVT.mouseMove = mouseMove;
- initEventQueue();
- memset(keyUpMsg,0,sizeof(keyUpMsg));
-
- /* Catch program termination signals so we can clean up properly */
- signal(SIGABRT, _EVT_abort);
- signal(SIGFPE, _EVT_abort);
- signal(SIGINT, _EVT_abort);
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
- int xRes,
- int yRes)
-{
- rangeX = xRes;
- rangeY = yRes;
-}
-
-/****************************************************************************
-REMARKS
-Modifes the mouse coordinates as necessary if scaling to OS coordinates,
-and sets the OS mouse cursor position.
-****************************************************************************/
-void _EVT_setMousePos(
- int *x,
- int *y)
-{
- /* Scale coordinates up to desktop coordinates first */
- int scaledX = (*x * _PM_deskX) / rangeX;
- int scaledY = (*y * _PM_deskY) / rangeY;
-
- /* Scale coordinates back to screen coordinates again */
- *x = (scaledX * rangeX) / _PM_deskX;
- *y = (scaledY * rangeY) / _PM_deskY;
- SetCursorPos(scaledX,scaledY);
-}
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVT_resume(void)
-{
- /* Do nothing for Win32 */
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVT_suspend(void)
-{
- /* Do nothing for Win32 */
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVT_exit(void)
-{
- /* Restore signal handlers */
- signal(SIGABRT, SIG_DFL);
- signal(SIGFPE, SIG_DFL);
- signal(SIGINT, SIG_DFL);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns the mask indicating what joystick axes are attached.
-
-HEADER:
-event.h
-
-REMARKS:
-This function is used to detect the attached joysticks, and determine
-what axes are present and functioning. This function will re-detect any
-attached joysticks when it is called, so if the user forgot to attach
-the joystick when the application started, you can call this function to
-re-detect any newly attached joysticks.
-
-SEE ALSO:
-EVT_joySetLowerRight, EVT_joySetCenter, EVT_joyIsPresent
-****************************************************************************/
-int EVTAPI EVT_joyIsPresent(void)
-{
- /* TODO: Implement joystick code based on DirectX! */
- return 0;
-}
-
-/****************************************************************************
-DESCRIPTION:
-Polls the joystick for position and button information.
-
-HEADER:
-event.h
-
-REMARKS:
-This routine is used to poll analogue joysticks for button and position
-information. It should be called once for each main loop of the user
-application, just before processing all pending events via EVT_getNext.
-All information polled from the joystick will be posted to the event
-queue for later retrieval.
-
-Note: Most analogue joysticks will provide readings that change even
- though the joystick has not moved. Hence if you call this routine
- you will likely get an EVT_JOYMOVE event every time through your
- event loop.
-
-SEE ALSO:
-EVT_getNext, EVT_peekNext, EVT_joySetUpperLeft, EVT_joySetLowerRight,
-EVT_joySetCenter, EVT_joyIsPresent
-****************************************************************************/
-void EVTAPI EVT_pollJoystick(void)
-{
-}
-
-/****************************************************************************
-DESCRIPTION:
-Calibrates the joystick upper left position
-
-HEADER:
-event.h
-
-REMARKS:
-This function can be used to zero in on better joystick calibration factors,
-which may work better than the default simplistic calibration (which assumes
-the joystick is centered when the event library is initialised).
-To use this function, ask the user to hold the stick in the upper left
-position and then have them press a key or button. and then call this
-function. This function will then read the joystick and update the
-calibration factors.
-
-Usually, assuming that the stick was centered when the event library was
-initialized, you really only need to call EVT_joySetLowerRight since the
-upper left position is usually always 0,0 on most joysticks. However, the
-safest procedure is to call all three calibration functions.
-
-SEE ALSO:
-EVT_joySetUpperLeft, EVT_joySetLowerRight, EVT_joyIsPresent
-****************************************************************************/
-void EVTAPI EVT_joySetUpperLeft(void)
-{
-}
-
-/****************************************************************************
-DESCRIPTION:
-Calibrates the joystick lower right position
-
-HEADER:
-event.h
-
-REMARKS:
-This function can be used to zero in on better joystick calibration factors,
-which may work better than the default simplistic calibration (which assumes
-the joystick is centered when the event library is initialised).
-To use this function, ask the user to hold the stick in the lower right
-position and then have them press a key or button. and then call this
-function. This function will then read the joystick and update the
-calibration factors.
-
-Usually, assuming that the stick was centered when the event library was
-initialized, you really only need to call EVT_joySetLowerRight since the
-upper left position is usually always 0,0 on most joysticks. However, the
-safest procedure is to call all three calibration functions.
-
-SEE ALSO:
-EVT_joySetUpperLeft, EVT_joySetCenter, EVT_joyIsPresent
-****************************************************************************/
-void EVTAPI EVT_joySetLowerRight(void)
-{
-}
-
-/****************************************************************************
-DESCRIPTION:
-Calibrates the joystick center position
-
-HEADER:
-event.h
-
-REMARKS:
-This function can be used to zero in on better joystick calibration factors,
-which may work better than the default simplistic calibration (which assumes
-the joystick is centered when the event library is initialised).
-To use this function, ask the user to hold the stick in the center
-position and then have them press a key or button. and then call this
-function. This function will then read the joystick and update the
-calibration factors.
-
-Usually, assuming that the stick was centered when the event library was
-initialized, you really only need to call EVT_joySetLowerRight since the
-upper left position is usually always 0,0 on most joysticks. However, the
-safest procedure is to call all three calibration functions.
-
-SEE ALSO:
-EVT_joySetUpperLeft, EVT_joySetLowerRight, EVT_joySetCenter
-****************************************************************************/
-void EVTAPI EVT_joySetCenter(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/win32/ntservc.c b/board/MAI/bios_emulator/scitech/src/pm/win32/ntservc.c
deleted file mode 100644
index 59d9aa0c7c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/win32/ntservc.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/****************************************************************************
-*
-* SciTech Display Doctor
-*
-* Copyright (C) 1991-2001 SciTech Software, Inc.
-* All rights reserved.
-*
-* ======================================================================
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* | |
-* |This copyrighted computer code is a proprietary trade secret of |
-* |SciTech Software, Inc., located at 505 Wall Street, Chico, CA 95928 |
-* |USA (www.scitechsoft.com). ANY UNAUTHORIZED POSSESSION, USE, |
-* |VIEWING, COPYING, MODIFICATION OR DISSEMINATION OF THIS CODE IS |
-* |STRICTLY PROHIBITED BY LAW. Unless you have current, express |
-* |written authorization from SciTech to possess or use this code, you |
-* |may be subject to civil and/or criminal penalties. |
-* | |
-* |If you received this code in error or you would like to report |
-* |improper use, please immediately contact SciTech Software, Inc. at |
-* |530-894-8400. |
-* | |
-* |REMOVAL OR MODIFICATION OF THIS HEADER IS STRICTLY PROHIBITED BY LAW|
-* ======================================================================
-*
-* Language: ANSI C
-* Environment: Windows NT, Windows 2K or Windows XP.
-*
-* Description: Main module to do the installation of the SDD and GLDirect
-* device driver components under Windows NT/2K/XP.
-*
-****************************************************************************/
-
-#include "pmapi.h"
-#include "win32/oshdr.h"
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-szDriverName - Actual name of the driver to install in the system
-szServiceName - Name of the service to create
-szLoadGroup - Load group for the driver (NULL for normal drivers)
-dwServiceType - Service type to create
-
-RETURNS:
-True on success, false on failure.
-
-REMARKS:
-This function does all the work to install the driver into the system.
-The driver is not however activated; for that you must use the Start_SddFilt
-function.
-****************************************************************************/
-ulong PMAPI PM_installService(
- const char *szDriverName,
- const char *szServiceName,
- const char *szLoadGroup,
- ulong dwServiceType)
-{
- SC_HANDLE scmHandle;
- SC_HANDLE driverHandle;
- char szDriverPath[MAX_PATH];
- HKEY key;
- char keyPath[MAX_PATH];
- ulong status;
-
- /* Obtain a handle to the service control manager requesting all access */
- if ((scmHandle = OpenSCManager(NULL, NULL, SC_MANAGER_ALL_ACCESS)) == NULL)
- return GetLastError();
-
- /* Find the path to the driver in system directory */
- GetSystemDirectory(szDriverPath, sizeof(szDriverPath));
- strcat(szDriverPath, "\\drivers\\");
- strcat(szDriverPath, szDriverName);
-
- /* Create the service with the Service Control Manager. */
- driverHandle = CreateService(scmHandle,
- szServiceName,
- szServiceName,
- SERVICE_ALL_ACCESS,
- dwServiceType,
- SERVICE_BOOT_START,
- SERVICE_ERROR_NORMAL,
- szDriverPath,
- szLoadGroup,
- NULL,
- NULL,
- NULL,
- NULL);
-
- /* Check to see if the driver could actually be installed. */
- if (!driverHandle) {
- status = GetLastError();
- CloseServiceHandle(scmHandle);
- return status;
- }
-
- /* Get a handle to the key for driver so that it can be altered in the */
- /* next step. */
- strcpy(keyPath, "SYSTEM\\CurrentControlSet\\Services\\");
- strcat(keyPath, szServiceName);
- if ((status = RegOpenKeyEx(HKEY_LOCAL_MACHINE,keyPath,0,KEY_ALL_ACCESS,&key)) != ERROR_SUCCESS) {
- /* A problem has occured. Delete the service so that it is not installed. */
- status = GetLastError();
- DeleteService(driverHandle);
- CloseServiceHandle(driverHandle);
- CloseServiceHandle(scmHandle);
- return status;
- }
-
- /* Delete the ImagePath value in the newly created key so that the */
- /* system looks for the driver in the normal location. */
- if ((status = RegDeleteValue(key, "ImagePath")) != ERROR_SUCCESS) {
- /* A problem has occurred. Delete the service so that it is not */
- /* installed and will not try to start. */
- RegCloseKey(key);
- DeleteService(driverHandle);
- CloseServiceHandle(driverHandle);
- CloseServiceHandle(scmHandle);
- return status;
- }
-
- /* Clean up and exit */
- RegCloseKey(key);
- CloseServiceHandle(driverHandle);
- CloseServiceHandle(scmHandle);
- return ERROR_SUCCESS;
-}
-
-/****************************************************************************
-PARAMETERS:
-szServiceName - Name of the service to start
-
-RETURNS:
-True on success, false on failure.
-
-REMARKS:
-This function is used to start the specified service and make it active.
-****************************************************************************/
-ulong PMAPI PM_startService(
- const char *szServiceName)
-{
- SC_HANDLE scmHandle;
- SC_HANDLE driverHandle;
- SERVICE_STATUS serviceStatus;
- ulong status;
-
- /* Obtain a handle to the service control manager requesting all access */
- if ((scmHandle = OpenSCManager(NULL, NULL, SC_MANAGER_ALL_ACCESS)) == NULL)
- return GetLastError();
-
- /* Open the service with the Service Control Manager. */
- if ((driverHandle = OpenService(scmHandle,szServiceName,SERVICE_ALL_ACCESS)) == NULL) {
- status = GetLastError();
- CloseServiceHandle(scmHandle);
- return status;
- }
-
- /* Start the service */
- if (!StartService(driverHandle,0,NULL)) {
- status = GetLastError();
- CloseServiceHandle(driverHandle);
- CloseServiceHandle(scmHandle);
- return status;
- }
-
- /* Query the service to make sure it is there */
- if (!QueryServiceStatus(driverHandle,&serviceStatus)) {
- status = GetLastError();
- CloseServiceHandle(driverHandle);
- CloseServiceHandle(scmHandle);
- return status;
- }
- CloseServiceHandle(driverHandle);
- CloseServiceHandle(scmHandle);
- return ERROR_SUCCESS;
-}
-
-/****************************************************************************
-PARAMETERS:
-szServiceName - Name of the service to stop
-
-RETURNS:
-True on success, false on failure.
-
-REMARKS:
-This function is used to stop the specified service and disable it.
-****************************************************************************/
-ulong PMAPI PM_stopService(
- const char *szServiceName)
-{
- SC_HANDLE scmHandle;
- SC_HANDLE driverHandle;
- SERVICE_STATUS serviceStatus;
- ulong status;
-
- /* Obtain a handle to the service control manager requesting all access */
- if ((scmHandle = OpenSCManager(NULL, NULL, SC_MANAGER_ALL_ACCESS)) == NULL)
- return GetLastError();
-
- /* Open the service with the Service Control Manager. */
- if ((driverHandle = OpenService(scmHandle,szServiceName,SERVICE_ALL_ACCESS)) == NULL) {
- status = GetLastError();
- CloseServiceHandle(scmHandle);
- return status;
- }
-
- /* Stop the service from running */
- if (!ControlService(driverHandle, SERVICE_CONTROL_STOP, &serviceStatus)) {
- status = GetLastError();
- CloseServiceHandle(driverHandle);
- CloseServiceHandle(scmHandle);
- return status;
- }
- CloseServiceHandle(driverHandle);
- CloseServiceHandle(scmHandle);
- return ERROR_SUCCESS;
-}
-
-/****************************************************************************
-PARAMETERS:
-szServiceName - Name of the service to remove
-
-RETURNS:
-True on success, false on failure.
-
-REMARKS:
-This function is used to remove a service completely from the system.
-****************************************************************************/
-ulong PMAPI PM_removeService(
- const char *szServiceName)
-{
- SC_HANDLE scmHandle;
- SC_HANDLE driverHandle;
- ulong status;
-
- /* Obtain a handle to the service control manager requesting all access */
- if ((scmHandle = OpenSCManager(NULL, NULL, SC_MANAGER_ALL_ACCESS)) == NULL)
- return GetLastError();
-
- /* Open the service with the Service Control Manager. */
- if ((driverHandle = OpenService(scmHandle,szServiceName,SERVICE_ALL_ACCESS)) == NULL) {
- status = GetLastError();
- CloseServiceHandle(scmHandle);
- return status;
- }
-
- /* Remove the service */
- if (!DeleteService(driverHandle)) {
- status = GetLastError();
- CloseServiceHandle(driverHandle);
- CloseServiceHandle(scmHandle);
- return status;
- }
- CloseServiceHandle(driverHandle);
- CloseServiceHandle(scmHandle);
- return ERROR_SUCCESS;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/win32/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/win32/oshdr.h
deleted file mode 100644
index 0c59e9006f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/win32/oshdr.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Win32
-*
-* Description: Include file to include all OS specific header files.
-*
-****************************************************************************/
-
-#define WIN32_LEAN_AND_MEAN
-#define STRICT
-#include <windows.h>
-#include <mmsystem.h>
-#include <float.h>
-#define NONAMELESSUNION
-#include "pm/ddraw.h"
-
-/* Macros to save and restore the default control word. Windows 9x has
- * some bugs in it such that calls to load any DLL's which load 16-bit
- * DLL's cause the floating point control word to get trashed. We fix
- * this by saving and restoring the control word across problematic
- * calls.
- */
-
-#if defined(__INTEL__)
-#define GET_DEFAULT_CW() \
-{ \
- if (_PM_cw_default == 0) \
- _PM_cw_default = _control87(0,0); \
-}
-#define RESET_DEFAULT_CW() \
- _control87(_PM_cw_default,0xFFFFFFFF)
-#else
-#define GET_DEFAULT_CW()
-#define RESET_DEFAULT_CW()
-#endif
-
-/* Custom window messages */
-
-#define WM_DO_SUSPEND_APP WM_USER
-#define WM_PM_LEAVE_FULLSCREEN 0
-#define WM_PM_RESTORE_FULLSCREEN 1
-
-/* Macro for disabling AutoPlay on a use system */
-
-#define AUTOPLAY_DRIVE_CDROM 0x20
-
-/*--------------------------- Global Variables ----------------------------*/
-
-#ifdef __INTEL__
-extern uint _PM_cw_default; /* Default FPU control word */
-#endif
-extern int _PM_deskX,_PM_deskY; /* Desktop dimensions */
-extern HWND _PM_hwndConsole; /* Window handle for console */
-
-/*-------------------------- Internal Functions ---------------------------*/
-
-void _EVT_pumpMessages(void);
diff --git a/board/MAI/bios_emulator/scitech/src/pm/win32/pm.c b/board/MAI/bios_emulator/scitech/src/pm/win32/pm.c
deleted file mode 100644
index 1ffdbccabc..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/win32/pm.c
+++ /dev/null
@@ -1,1459 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Win32
-*
-* Description: Implementation for the OS Portability Manager Library, which
-* contains functions to implement OS specific services in a
-* generic, cross platform API. Porting the OS Portability
-* Manager library is the first step to porting any SciTech
-* products to a new platform.
-*
-****************************************************************************/
-
-#define WIN32_LEAN_AND_MEAN
-#define STRICT
-#include <windows.h>
-#include <mmsystem.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <direct.h>
-#include "pmapi.h"
-#include "drvlib/os/os.h"
-#include "pm_help.h"
-
-/*--------------------------- Global variables ----------------------------*/
-
-ibool _PM_haveWinNT; /* True if we are running on NT */
-static uint VESABuf_len = 1024; /* Length of the VESABuf buffer */
-static void *VESABuf_ptr = NULL;/* Near pointer to VESABuf */
-static uint VESABuf_rseg; /* Real mode segment of VESABuf */
-static uint VESABuf_roff; /* Real mode offset of VESABuf */
-HANDLE _PM_hDevice = NULL; /* Handle to Win32 VxD */
-static ibool inited = false; /* Flags if we are initialised */
-static void (PMAPIP fatalErrorCleanup)(void) = NULL;
-
-static char *szMachineNameKey = "System\\CurrentControlSet\\control\\ComputerName\\ComputerName";
-static char *szMachineNameKeyNT = "System\\CurrentControlSet\\control\\ComputerName\\ActiveComputerName";
-static char *szMachineName = "ComputerName";
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* Macro to check for a valid, loaded version of PMHELP. We check this
- * on demand when we need these services rather than when PM_init() is
- * called because if we are running on DirectDraw we don't need PMHELP.VXD.
- */
-
-#define CHECK_FOR_PMHELP() \
-{ \
- if (_PM_hDevice == INVALID_HANDLE_VALUE) \
- if (_PM_haveWinNT) \
- PM_fatalError("Unable to connect to PMHELP.SYS or SDDHELP.SYS!"); \
- else \
- PM_fatalError("Unable to connect to PMHELP.VXD or SDDHELP.VXD!"); \
-}
-
-/****************************************************************************
-REMARKS:
-Initialise the PM library and connect to our helper device driver. If we
-cannot connect to our helper device driver, we bail out with an error
-message. Our Windows 9x VxD is dynamically loadable, so it can be loaded
-after the system has started.
-****************************************************************************/
-void PMAPI PM_init(void)
-{
- DWORD inBuf[1]; /* Buffer to receive data from VxD */
- DWORD outBuf[1]; /* Buffer to receive data from VxD */
- DWORD count; /* Count of bytes returned from VxD */
- char cntPath[PM_MAX_PATH];
- char *env;
-
- /* Create a file handle for the static VxD if possible, otherwise
- * dynamically load the PMHELP helper VxD. Note that if an old version
- * of SDD is loaded, we use the PMHELP VxD instead.
- */
- if (!inited) {
- /* Determine if we are running under Windows NT or not and
- * set the global OS type variable.
- */
- _PM_haveWinNT = false;
- if ((GetVersion() & 0x80000000UL) == 0)
- _PM_haveWinNT = true;
- ___drv_os_type = (_PM_haveWinNT) ? _OS_WINNT : _OS_WIN95;
-
- /* Now try to connect to SDDHELP.VXD or SDDHELP.SYS */
- _PM_hDevice = CreateFile(SDDHELP_MODULE_PATH, 0,0,0, CREATE_NEW, FILE_FLAG_DELETE_ON_CLOSE, 0);
- if (_PM_hDevice != INVALID_HANDLE_VALUE) {
- if (!DeviceIoControl(_PM_hDevice, PMHELP_GETVER32, NULL, 0,
- outBuf, sizeof(outBuf), &count, NULL) || outBuf[0] < PMHELP_VERSION) {
- /* Old version of SDDHELP loaded, so use PMHELP instead */
- CloseHandle(_PM_hDevice);
- _PM_hDevice = INVALID_HANDLE_VALUE;
- }
- }
- if (_PM_hDevice == INVALID_HANDLE_VALUE) {
- /* First try to see if there is a currently loaded PMHELP driver.
- * This is usually the case when we are running under Windows NT/2K.
- */
- _PM_hDevice = CreateFile(PMHELP_MODULE_PATH, 0,0,0, CREATE_NEW, FILE_FLAG_DELETE_ON_CLOSE, 0);
- if (_PM_hDevice == INVALID_HANDLE_VALUE) {
- /* The driver was not staticly loaded, so try creating a file handle
- * to a dynamic version of the VxD if possible. Note that on WinNT/2K we
- * cannot support dynamically loading the drivers.
- */
- _PM_hDevice = CreateFile(PMHELP_VXD_PATH, 0,0,0, CREATE_NEW, FILE_FLAG_DELETE_ON_CLOSE, 0);
- }
- }
- if (_PM_hDevice != INVALID_HANDLE_VALUE) {
- /* Call the driver to determine the version number */
- if (!DeviceIoControl(_PM_hDevice, PMHELP_GETVER32, inBuf, sizeof(inBuf),
- outBuf, sizeof(outBuf), &count, NULL) || outBuf[0] < PMHELP_VERSION) {
- if (_PM_haveWinNT)
- PM_fatalError("Older version of PMHELP.SYS found!");
- else
- PM_fatalError("Older version of PMHELP.VXD found!");
- }
-
- /* Now set the current path inside the VxD so it knows what the
- * current directory is for loading Nucleus drivers.
- */
- inBuf[0] = (ulong)PM_getCurrentPath(cntPath,sizeof(cntPath));
- if (!DeviceIoControl(_PM_hDevice, PMHELP_SETCNTPATH32, inBuf, sizeof(inBuf), outBuf, sizeof(outBuf), &count, NULL))
- PM_fatalError("Unable to set VxD current path!");
-
- /* Now pass down the NUCLEUS_PATH environment variable to the device
- * driver so it can use this value if it is found.
- */
- if ((env = getenv("NUCLEUS_PATH")) != NULL) {
- inBuf[0] = (ulong)env;
- if (!DeviceIoControl(_PM_hDevice, PMHELP_SETNUCLEUSPATH32, inBuf, sizeof(inBuf), outBuf, sizeof(outBuf), &count, NULL))
- PM_fatalError("Unable to set VxD Nucleus path!");
- }
-
- /* Enable IOPL for ring-3 code by default if driver is present */
- if (_PM_haveWinNT)
- PM_setIOPL(3);
- }
-
- /* Indicate that we have been initialised */
- inited = true;
- }
-}
-
-/****************************************************************************
-REMARKS:
-We do have BIOS access under Windows 9x, but not under Windows NT.
-****************************************************************************/
-int PMAPI PM_setIOPL(
- int iopl)
-{
- DWORD inBuf[1]; /* Buffer to receive data from VxD */
- DWORD outBuf[1]; /* Buffer to receive data from VxD */
- DWORD count; /* Count of bytes returned from VxD */
- static int cntIOPL = 0;
- int oldIOPL = cntIOPL;
-
- /* Enable I/O by adjusting the I/O permissions map on Windows NT */
- if (_PM_haveWinNT) {
- CHECK_FOR_PMHELP();
- if (iopl == 3)
- DeviceIoControl(_PM_hDevice, PMHELP_ENABLERING3IOPL, inBuf, sizeof(inBuf),outBuf, sizeof(outBuf), &count, NULL);
- else
- DeviceIoControl(_PM_hDevice, PMHELP_DISABLERING3IOPL, inBuf, sizeof(inBuf),outBuf, sizeof(outBuf), &count, NULL);
- cntIOPL = iopl;
- return oldIOPL;
- }
-
- /* We always have IOPL on Windows 9x */
- return 3;
-}
-
-/****************************************************************************
-REMARKS:
-We do have BIOS access under Windows 9x, but not under Windows NT.
-****************************************************************************/
-ibool PMAPI PM_haveBIOSAccess(void)
-{
- if (PM_getOSType() == _OS_WINNT)
- return false;
- else
- return _PM_hDevice != INVALID_HANDLE_VALUE;
-}
-
-/****************************************************************************
-REMARKS:
-Return the operating system type identifier.
-****************************************************************************/
-long PMAPI PM_getOSType(void)
-{
- if ((GetVersion() & 0x80000000UL) == 0)
- return ___drv_os_type = _OS_WINNT;
- else
- return ___drv_os_type = _OS_WIN95;
-}
-
-/****************************************************************************
-REMARKS:
-Return the runtime type identifier.
-****************************************************************************/
-int PMAPI PM_getModeType(void)
-{
- return PM_386;
-}
-
-/****************************************************************************
-REMARKS:
-Add a file directory separator to the end of the filename.
-****************************************************************************/
-void PMAPI PM_backslash(
- char *s)
-{
- uint pos = strlen(s);
- if (s[pos-1] != '\\') {
- s[pos] = '\\';
- s[pos+1] = '\0';
- }
-}
-
-/****************************************************************************
-REMARKS:
-Add a user defined PM_fatalError cleanup function.
-****************************************************************************/
-void PMAPI PM_setFatalErrorCleanup(
- void (PMAPIP cleanup)(void))
-{
- fatalErrorCleanup = cleanup;
-}
-
-/****************************************************************************
-REMARKS:
-Report a fatal error condition and halt the program.
-****************************************************************************/
-void PMAPI PM_fatalError(
- const char *msg)
-{
- if (fatalErrorCleanup)
- fatalErrorCleanup();
- MessageBox(NULL,msg,"Fatal Error!", MB_ICONEXCLAMATION);
- exit(1);
-}
-
-/****************************************************************************
-REMARKS:
-Allocate the real mode VESA transfer buffer for communicating with the BIOS.
-****************************************************************************/
-void * PMAPI PM_getVESABuf(
- uint *len,
- uint *rseg,
- uint *roff)
-{
- DWORD outBuf[4]; /* Buffer to receive data from VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- /* We require the helper VxD to be loaded staticly in order to support
- * the VESA transfer buffer. We do not support dynamically allocating
- * real mode memory buffers from Win32 programs (we need a 16-bit DLL
- * for this, and Windows 9x becomes very unstable if you free the
- * memory blocks out of order).
- */
- if (!inited)
- PM_init();
- if (!VESABuf_ptr) {
- CHECK_FOR_PMHELP();
- if (DeviceIoControl(_PM_hDevice, PMHELP_GETVESABUF32, NULL, 0,
- outBuf, sizeof(outBuf), &count, NULL)) {
- if (!outBuf[0])
- return NULL;
- VESABuf_ptr = (void*)outBuf[0];
- VESABuf_len = outBuf[1];
- VESABuf_rseg = outBuf[2];
- VESABuf_roff = outBuf[3];
- }
- }
- *len = VESABuf_len;
- *rseg = VESABuf_rseg;
- *roff = VESABuf_roff;
- return VESABuf_ptr;
-}
-
-/****************************************************************************
-REMARKS:
-Check if a key has been pressed.
-****************************************************************************/
-int PMAPI PM_kbhit(void)
-{
- /* Not used in Windows */
- return true;
-}
-
-/****************************************************************************
-REMARKS:
-Wait for and return the next keypress.
-****************************************************************************/
-int PMAPI PM_getch(void)
-{
- /* Not used in Windows */
- return 0xD;
-}
-
-/****************************************************************************
-REMARKS:
-Set the location of the OS console cursor.
-****************************************************************************/
-void PM_setOSCursorLocation(
- int x,
- int y)
-{
- /* Nothing to do for Windows */
- (void)x;
- (void)y;
-}
-
-/****************************************************************************
-REMARKS:
-Set the width of the OS console.
-****************************************************************************/
-void PM_setOSScreenWidth(
- int width,
- int height)
-{
- /* Nothing to do for Windows */
- (void)width;
- (void)height;
-}
-
-/****************************************************************************
-REMARKS:
-Set the real time clock handler (used for software stereo modes).
-****************************************************************************/
-ibool PMAPI PM_setRealTimeClockHandler(
- PM_intHandler ih,
- int frequency)
-{
- /* We do not support this from Win32 programs. Rather the VxD handles
- * this stuff it will take care of hooking the stereo flip functions at
- * the VxD level.
- */
- (void)ih;
- (void)frequency;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Set the real time clock frequency (for stereo modes).
-****************************************************************************/
-void PMAPI PM_setRealTimeClockFrequency(
- int frequency)
-{
- /* Not supported under Win32 */
- (void)frequency;
-}
-
-/****************************************************************************
-REMARKS:
-Restore the original real time clock handler.
-****************************************************************************/
-void PMAPI PM_restoreRealTimeClockHandler(void)
-{
- /* Not supported under Win32 */
-}
-
-/****************************************************************************
-REMARKS:
-Return the current operating system path or working directory.
-****************************************************************************/
-char * PMAPI PM_getCurrentPath(
- char *path,
- int maxLen)
-{
- return getcwd(path,maxLen);
-}
-
-/****************************************************************************
-REMARKS:
-Query a string from the registry (extended version).
-****************************************************************************/
-static ibool REG_queryStringEx(
- HKEY hKey,
- const char *szValue,
- char *value,
- ulong size)
-{
- DWORD type;
-
- if (RegQueryValueEx(hKey,(PCHAR)szValue,(PDWORD)NULL,(PDWORD)&type,(LPBYTE)value,(PDWORD)&size) == ERROR_SUCCESS)
- return true;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Query a string from the registry.
-****************************************************************************/
-static ibool REG_queryString(
- const char *szKey,
- const char *szValue,
- char *value,
- DWORD size)
-{
- HKEY hKey;
- ibool status = false;
-
- memset(value,0,sizeof(value));
- if (RegOpenKey(HKEY_LOCAL_MACHINE,szKey,&hKey) == ERROR_SUCCESS) {
- status = REG_queryStringEx(hKey,szValue,value,size);
- RegCloseKey(hKey);
- }
- return status;
-}
-
-/****************************************************************************
-REMARKS:
-Return the drive letter for the boot drive.
-****************************************************************************/
-char PMAPI PM_getBootDrive(void)
-{
- static char path[256];
- GetSystemDirectory(path,sizeof(path));
- return path[0];
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the VBE/AF driver files.
-****************************************************************************/
-const char * PMAPI PM_getVBEAFPath(void)
-{
- return "c:\\";
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the Nucleus driver files.
-****************************************************************************/
-const char * PMAPI PM_getNucleusPath(void)
-{
- static char path[256];
- char *env;
-
- if ((env = getenv("NUCLEUS_PATH")) != NULL)
- return env;
- GetSystemDirectory(path,sizeof(path));
- strcat(path,"\\nucleus");
- return path;
-}
-
-/****************************************************************************
-REMARKS:
-Return the path to the Nucleus configuration files.
-****************************************************************************/
-const char * PMAPI PM_getNucleusConfigPath(void)
-{
- static char path[256];
- strcpy(path,PM_getNucleusPath());
- PM_backslash(path);
- strcat(path,"config");
- return path;
-}
-
-/****************************************************************************
-REMARKS:
-Return a unique identifier for the machine if possible.
-****************************************************************************/
-const char * PMAPI PM_getUniqueID(void)
-{
- return PM_getMachineName();
-}
-
-/****************************************************************************
-REMARKS:
-Get the name of the machine on the network.
-****************************************************************************/
-const char * PMAPI PM_getMachineName(void)
-{
- static char name[256];
-
- if (REG_queryString(szMachineNameKey,szMachineName,name,sizeof(name)))
- return name;
- if (REG_queryString(szMachineNameKeyNT,szMachineName,name,sizeof(name)))
- return name;
- return "Unknown";
-}
-
-/****************************************************************************
-REMARKS:
-Return a pointer to the real mode BIOS data area.
-****************************************************************************/
-void * PMAPI PM_getBIOSPointer(void)
-{
- if (_PM_haveWinNT) {
- /* On Windows NT we have to map it physically directly */
- return PM_mapPhysicalAddr(0x400, 0x1000, true);
- }
- else {
- /* For Windows 9x we can access this memory directly */
- return (void*)0x400;
- }
-}
-
-/****************************************************************************
-REMARKS:
-Return a pointer to 0xA0000 physical VGA graphics framebuffer.
-****************************************************************************/
-void * PMAPI PM_getA0000Pointer(void)
-{
- if (_PM_haveWinNT) {
- /* On Windows NT we have to map it physically directly */
- return PM_mapPhysicalAddr(0xA0000, 0x0FFFF, false);
- }
- else {
- /* Always use the 0xA0000 linear address so that we will use
- * whatever page table mappings are set up for us (ie: for virtual
- * bank switching.
- */
- return (void*)0xA0000;
- }
-}
-
-/****************************************************************************
-REMARKS:
-Map a physical address to a linear address in the callers process.
-****************************************************************************/
-void * PMAPI PM_mapPhysicalAddr(
- ulong base,
- ulong limit,
- ibool isCached)
-{
- DWORD inBuf[3]; /* Buffer to send data to VxD */
- DWORD outBuf[1]; /* Buffer to receive data from VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- if (!inited)
- PM_init();
- inBuf[0] = base;
- inBuf[1] = limit;
- inBuf[2] = isCached;
- CHECK_FOR_PMHELP();
- if (DeviceIoControl(_PM_hDevice, PMHELP_MAPPHYS32, inBuf, sizeof(inBuf),
- outBuf, sizeof(outBuf), &count, NULL))
- return (void*)outBuf[0];
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a physical address mapping allocated by PM_mapPhysicalAddr.
-****************************************************************************/
-void PMAPI PM_freePhysicalAddr(
- void *ptr,
- ulong limit)
-{
- /* We never free the mappings under Win32 (the VxD tracks them and
- * reissues the same mappings until the system is rebooted).
- */
- (void)ptr;
- (void)limit;
-}
-
-/****************************************************************************
-REMARKS:
-Find the physical address of a linear memory address in current process.
-****************************************************************************/
-ulong PMAPI PM_getPhysicalAddr(
- void *p)
-{
- DWORD inBuf[1]; /* Buffer to send data to VxD */
- DWORD outBuf[1]; /* Buffer to receive data from VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- if (!inited)
- PM_init();
- inBuf[0] = (ulong)p;
- CHECK_FOR_PMHELP();
- if (DeviceIoControl(_PM_hDevice, PMHELP_GETPHYSICALADDR32, inBuf, sizeof(inBuf),
- outBuf, sizeof(outBuf), &count, NULL))
- return outBuf[0];
- return 0xFFFFFFFFUL;
-}
-
-/****************************************************************************
-REMARKS:
-Find the physical address of a linear memory address in current process.
-****************************************************************************/
-ibool PMAPI PM_getPhysicalAddrRange(
- void *p,
- ulong length,
- ulong *physAddress)
-{
- DWORD inBuf[3]; /* Buffer to send data to VxD */
- DWORD outBuf[1]; /* Buffer to receive data from VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- if (!inited)
- PM_init();
- inBuf[0] = (ulong)p;
- inBuf[1] = (ulong)length;
- inBuf[2] = (ulong)physAddress;
- CHECK_FOR_PMHELP();
- if (DeviceIoControl(_PM_hDevice, PMHELP_GETPHYSICALADDRRANGE32, inBuf, sizeof(inBuf),
- outBuf, sizeof(outBuf), &count, NULL))
- return outBuf[0];
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Sleep for the specified number of milliseconds.
-****************************************************************************/
-void PMAPI PM_sleep(
- ulong milliseconds)
-{
- Sleep(milliseconds);
-}
-
-/****************************************************************************
-REMARKS:
-Return the base I/O port for the specified COM port.
-****************************************************************************/
-int PMAPI PM_getCOMPort(int port)
-{
- /* TODO: Re-code this to determine real values using the Plug and Play */
- /* manager for the OS. */
- switch (port) {
- case 0: return 0x3F8;
- case 1: return 0x2F8;
- case 2: return 0x3E8;
- case 3: return 0x2E8;
- }
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Return the base I/O port for the specified LPT port.
-****************************************************************************/
-int PMAPI PM_getLPTPort(int port)
-{
- /* TODO: Re-code this to determine real values using the Plug and Play */
- /* manager for the OS. */
- switch (port) {
- case 0: return 0x3BC;
- case 1: return 0x378;
- case 2: return 0x278;
- }
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of shared memory. For Win9x we allocate shared memory
-as locked, global memory that is accessible from any memory context
-(including interrupt time context), which allows us to load our important
-data structure and code such that we can access it directly from a ring
-0 interrupt context.
-****************************************************************************/
-void * PMAPI PM_mallocShared(
- long size)
-{
- DWORD inBuf[1]; /* Buffer to send data to VxD */
- DWORD outBuf[1]; /* Buffer to receive data from VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- inBuf[0] = size;
- CHECK_FOR_PMHELP();
- if (DeviceIoControl(_PM_hDevice, PMHELP_MALLOCSHARED32, inBuf, sizeof(inBuf),
- outBuf, sizeof(outBuf), &count, NULL))
- return (void*)outBuf[0];
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of shared memory.
-****************************************************************************/
-void PMAPI PM_freeShared(
- void *ptr)
-{
- DWORD inBuf[1]; /* Buffer to send data to VxD */
-
- inBuf[0] = (ulong)ptr;
- CHECK_FOR_PMHELP();
- DeviceIoControl(_PM_hDevice, PMHELP_FREESHARED32, inBuf, sizeof(inBuf), NULL, 0, NULL, NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Map a linear memory address to the calling process address space. The
-address will have been allocated in another process using the
-PM_mapPhysicalAddr function.
-****************************************************************************/
-void * PMAPI PM_mapToProcess(
- void *base,
- ulong limit)
-{
- (void)base;
- (void)limit;
- return base;
-}
-
-/****************************************************************************
-REMARKS:
-Map a real mode pointer to a protected mode pointer.
-****************************************************************************/
-void * PMAPI PM_mapRealPointer(
- uint r_seg,
- uint r_off)
-{
- return (void*)(MK_PHYS(r_seg,r_off));
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of real mode memory
-****************************************************************************/
-void * PMAPI PM_allocRealSeg(
- uint size,
- uint *r_seg,
- uint *r_off)
-{
- /* We do not support dynamically allocating real mode memory buffers
- * from Win32 programs (we need a 16-bit DLL for this, and Windows
- * 9x becomes very unstable if you free the memory blocks out of order).
- */
- (void)size;
- (void)r_seg;
- (void)r_off;
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of real mode memory.
-****************************************************************************/
-void PMAPI PM_freeRealSeg(
- void *mem)
-{
- /* Not supported in Windows */
- (void)mem;
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt (parameters in DPMI compatible structure)
-****************************************************************************/
-void PMAPI DPMI_int86(
- int intno,
- DPMI_regs *regs)
-{
- DWORD inBuf[2]; /* Buffer to send data to VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- if (!inited)
- PM_init();
- inBuf[0] = intno;
- inBuf[1] = (ulong)regs;
- CHECK_FOR_PMHELP();
- DeviceIoControl(_PM_hDevice, PMHELP_DPMIINT8632, inBuf, sizeof(inBuf),
- NULL, 0, &count, NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt.
-****************************************************************************/
-int PMAPI PM_int86(
- int intno,
- RMREGS *in,
- RMREGS *out)
-{
- DWORD inBuf[3]; /* Buffer to send data to VxD */
- DWORD outBuf[1]; /* Buffer to receive data from VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- if (!inited)
- PM_init();
- inBuf[0] = intno;
- inBuf[1] = (ulong)in;
- inBuf[2] = (ulong)out;
- CHECK_FOR_PMHELP();
- if (DeviceIoControl(_PM_hDevice, PMHELP_INT8632, inBuf, sizeof(inBuf),
- outBuf, sizeof(outBuf), &count, NULL))
- return outBuf[0];
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Issue a real mode interrupt.
-****************************************************************************/
-int PMAPI PM_int86x(
- int intno,
- RMREGS *in,
- RMREGS *out,
- RMSREGS *sregs)
-{
- DWORD inBuf[4]; /* Buffer to send data to VxD */
- DWORD outBuf[1]; /* Buffer to receive data from VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- if (!inited)
- PM_init();
- inBuf[0] = intno;
- inBuf[1] = (ulong)in;
- inBuf[2] = (ulong)out;
- inBuf[3] = (ulong)sregs;
- CHECK_FOR_PMHELP();
- if (DeviceIoControl(_PM_hDevice, PMHELP_INT86X32, inBuf, sizeof(inBuf),
- outBuf, sizeof(outBuf), &count, NULL))
- return outBuf[0];
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Call a real mode far function.
-****************************************************************************/
-void PMAPI PM_callRealMode(
- uint seg,
- uint off,
- RMREGS *in,
- RMSREGS *sregs)
-{
- DWORD inBuf[4]; /* Buffer to send data to VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- if (!inited)
- PM_init();
- inBuf[0] = seg;
- inBuf[1] = off;
- inBuf[2] = (ulong)in;
- inBuf[3] = (ulong)sregs;
- CHECK_FOR_PMHELP();
- DeviceIoControl(_PM_hDevice, PMHELP_CALLREALMODE32, inBuf, sizeof(inBuf),
- NULL, 0, &count, NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Return the amount of available memory.
-****************************************************************************/
-void PMAPI PM_availableMemory(
- ulong *physical,
- ulong *total)
-{
- /* We don't support this under Win32 at the moment */
- *physical = *total = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Allocate a block of locked, physical memory for DMA operations.
-****************************************************************************/
-void * PMAPI PM_allocLockedMem(
- uint size,
- ulong *physAddr,
- ibool contiguous,
- ibool below16M)
-{
- DWORD inBuf[4]; /* Buffer to send data to VxD */
- DWORD outBuf[1]; /* Buffer to receive data from VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- if (!inited)
- PM_init();
- inBuf[0] = size;
- inBuf[1] = (ulong)physAddr;
- inBuf[2] = (ulong)contiguous;
- inBuf[3] = (ulong)below16M;
- CHECK_FOR_PMHELP();
- if (DeviceIoControl(_PM_hDevice, PMHELP_ALLOCLOCKED32, inBuf, sizeof(inBuf),
- outBuf, sizeof(outBuf), &count, NULL))
- return (void*)outBuf[0];
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a block of locked physical memory.
-****************************************************************************/
-void PMAPI PM_freeLockedMem(
- void *p,
- uint size,
- ibool contiguous)
-{
- DWORD inBuf[3]; /* Buffer to send data to VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- if (!inited)
- PM_init();
- inBuf[0] = (ulong)p;
- inBuf[1] = size;
- inBuf[2] = contiguous;
- CHECK_FOR_PMHELP();
- DeviceIoControl(_PM_hDevice, PMHELP_FREELOCKED32, inBuf, sizeof(inBuf),
- NULL, 0, &count, NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Allocates a page aligned and page sized block of memory
-****************************************************************************/
-void * PMAPI PM_allocPage(
- ibool locked)
-{
- DWORD inBuf[2]; /* Buffer to send data to VxD */
- DWORD outBuf[1]; /* Buffer to receive data from VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- if (!inited)
- PM_init();
- inBuf[0] = locked;
- CHECK_FOR_PMHELP();
- if (DeviceIoControl(_PM_hDevice, PMHELP_ALLOCPAGE32, inBuf, sizeof(inBuf),
- outBuf, sizeof(outBuf), &count, NULL))
- return (void*)outBuf[0];
- return NULL;
-}
-
-/****************************************************************************
-REMARKS:
-Free a page aligned and page sized block of memory
-****************************************************************************/
-void PMAPI PM_freePage(
- void *p)
-{
- DWORD inBuf[1]; /* Buffer to send data to VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- if (!inited)
- PM_init();
- inBuf[0] = (ulong)p;
- CHECK_FOR_PMHELP();
- DeviceIoControl(_PM_hDevice, PMHELP_FREEPAGE32, inBuf, sizeof(inBuf),
- NULL, 0, &count, NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Lock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_lockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
- DWORD inBuf[2]; /* Buffer to send data to VxD */
- DWORD outBuf[1]; /* Buffer to receive data from VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- inBuf[0] = (ulong)p;
- inBuf[1] = len;
- inBuf[2] = (ulong)lh;
- CHECK_FOR_PMHELP();
- if (DeviceIoControl(_PM_hDevice, PMHELP_LOCKDATAPAGES32, inBuf, sizeof(inBuf),
- outBuf, sizeof(outBuf), &count, NULL))
- return outBuf[0];
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Unlock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_unlockDataPages(void *p,uint len,PM_lockHandle *lh)
-{
- DWORD inBuf[2]; /* Buffer to send data to VxD */
- DWORD outBuf[1]; /* Buffer to receive data from VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- inBuf[0] = (ulong)p;
- inBuf[1] = len;
- inBuf[2] = (ulong)lh;
- CHECK_FOR_PMHELP();
- if (DeviceIoControl(_PM_hDevice, PMHELP_UNLOCKDATAPAGES32, inBuf, sizeof(inBuf),
- outBuf, sizeof(outBuf), &count, NULL))
- return outBuf[0];
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Lock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_lockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
- DWORD inBuf[2]; /* Buffer to send data to VxD */
- DWORD outBuf[1]; /* Buffer to receive data from VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- inBuf[0] = (ulong)p;
- inBuf[1] = len;
- inBuf[2] = (ulong)lh;
- CHECK_FOR_PMHELP();
- if (DeviceIoControl(_PM_hDevice, PMHELP_LOCKCODEPAGES32, inBuf, sizeof(inBuf),
- outBuf, sizeof(outBuf), &count, NULL))
- return outBuf[0];
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Unlock linear memory so it won't be paged.
-****************************************************************************/
-int PMAPI PM_unlockCodePages(void (*p)(),uint len,PM_lockHandle *lh)
-{
- DWORD inBuf[2]; /* Buffer to send data to VxD */
- DWORD outBuf[1]; /* Buffer to receive data from VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- inBuf[0] = (ulong)p;
- inBuf[1] = len;
- inBuf[2] = (ulong)lh;
- CHECK_FOR_PMHELP();
- if (DeviceIoControl(_PM_hDevice, PMHELP_UNLOCKCODEPAGES32, inBuf, sizeof(inBuf),
- outBuf, sizeof(outBuf), &count, NULL))
- return outBuf[0];
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display banks.
-****************************************************************************/
-void PMAPI PM_setBankA(
- int bank)
-{
- RMREGS regs;
- regs.x.ax = 0x4F05;
- regs.x.bx = 0x0000;
- regs.x.dx = bank;
- PM_int86(0x10,&regs,&regs);
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display banks.
-****************************************************************************/
-void PMAPI PM_setBankAB(
- int bank)
-{
- RMREGS regs;
- regs.x.ax = 0x4F05;
- regs.x.bx = 0x0000;
- regs.x.dx = bank;
- PM_int86(0x10,&regs,&regs);
- regs.x.ax = 0x4F05;
- regs.x.bx = 0x0001;
- regs.x.dx = bank;
- PM_int86(0x10,&regs,&regs);
-}
-
-/****************************************************************************
-REMARKS:
-Call the VBE/Core software interrupt to change display start address.
-****************************************************************************/
-void PMAPI PM_setCRTStart(
- int x,
- int y,
- int waitVRT)
-{
- RMREGS regs;
- regs.x.ax = 0x4F07;
- regs.x.bx = waitVRT;
- regs.x.cx = x;
- regs.x.dx = y;
- PM_int86(0x10,&regs,&regs);
-}
-
-/****************************************************************************
-REMARKS:
-Enable write combining for the memory region.
-****************************************************************************/
-ibool PMAPI PM_enableWriteCombine(
- ulong base,
- ulong length,
- uint type)
-{
- DWORD inBuf[3]; /* Buffer to send data to VxD */
- DWORD outBuf[1]; /* Buffer to receive data from VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- if (!inited)
- PM_init();
- inBuf[0] = base;
- inBuf[1] = length;
- inBuf[2] = type;
- CHECK_FOR_PMHELP();
- if (DeviceIoControl(_PM_hDevice, PMHELP_ENABLELFBCOMB32, inBuf, sizeof(inBuf),
- outBuf, sizeof(outBuf), &count, NULL))
- return outBuf[0];
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Get the page directory base register value
-****************************************************************************/
-ulong PMAPI _PM_getPDB(void)
-{
- DWORD outBuf[1]; /* Buffer to receive data from VxD */
- DWORD count; /* Count of bytes returned from VxD */
-
- CHECK_FOR_PMHELP();
- if (DeviceIoControl(_PM_hDevice, PMHELP_GETPDB32, NULL, 0,
- outBuf, sizeof(outBuf), &count, NULL))
- return outBuf[0];
- return 0;
-}
-
-/****************************************************************************
-REMARKS:
-Flush the translation lookaside buffer.
-****************************************************************************/
-void PMAPI PM_flushTLB(void)
-{
- CHECK_FOR_PMHELP();
- DeviceIoControl(_PM_hDevice, PMHELP_FLUSHTLB32, NULL, 0, NULL, 0, NULL, NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Execute the POST on the secondary BIOS for a controller.
-****************************************************************************/
-ibool PMAPI PM_doBIOSPOST(
- ushort axVal,
- ulong BIOSPhysAddr,
- void *mappedBIOS,
- ulong BIOSLen)
-{
- /* This is never done by Win32 programs, but rather done by the VxD
- * when the system boots.
- */
- (void)axVal;
- (void)BIOSPhysAddr;
- (void)mappedBIOS;
- (void)BIOSLen;
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Load an OS specific shared library or DLL. If the OS does not support
-shared libraries, simply return NULL.
-****************************************************************************/
-PM_MODULE PMAPI PM_loadLibrary(
- const char *szDLLName)
-{
- return (PM_MODULE)LoadLibrary(szDLLName);
-}
-
-/****************************************************************************
-REMARKS:
-Get the address of a named procedure from a shared library.
-****************************************************************************/
-void * PMAPI PM_getProcAddress(
- PM_MODULE hModule,
- const char *szProcName)
-{
- return (void*)GetProcAddress((HINSTANCE)hModule,szProcName);
-}
-
-/****************************************************************************
-REMARKS:
-Unload a shared library.
-****************************************************************************/
-void PMAPI PM_freeLibrary(
- PM_MODULE hModule)
-{
- FreeLibrary((HINSTANCE)hModule);
-}
-
-/****************************************************************************
-REMARKS:
-Internal function to convert the find data to the generic interface.
-****************************************************************************/
-static void convertFindData(
- PM_findData *findData,
- WIN32_FIND_DATA *blk)
-{
- ulong dwSize = findData->dwSize;
-
- memset(findData,0,findData->dwSize);
- findData->dwSize = dwSize;
- if (blk->dwFileAttributes & FILE_ATTRIBUTE_READONLY)
- findData->attrib |= PM_FILE_READONLY;
- if (blk->dwFileAttributes & FILE_ATTRIBUTE_DIRECTORY)
- findData->attrib |= PM_FILE_DIRECTORY;
- if (blk->dwFileAttributes & FILE_ATTRIBUTE_ARCHIVE)
- findData->attrib |= PM_FILE_ARCHIVE;
- if (blk->dwFileAttributes & FILE_ATTRIBUTE_HIDDEN)
- findData->attrib |= PM_FILE_HIDDEN;
- if (blk->dwFileAttributes & FILE_ATTRIBUTE_SYSTEM)
- findData->attrib |= PM_FILE_SYSTEM;
- findData->sizeLo = blk->nFileSizeLow;
- findData->sizeHi = blk->nFileSizeHigh;
- strncpy(findData->name,blk->cFileName,PM_MAX_PATH);
- findData->name[PM_MAX_PATH-1] = 0;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the first file matching a search criteria in a directory.
-****************************************************************************/
-void *PMAPI PM_findFirstFile(
- const char *filename,
- PM_findData *findData)
-{
- WIN32_FIND_DATA blk;
- HANDLE hfile;
-
- if ((hfile = FindFirstFile(filename,&blk)) != INVALID_HANDLE_VALUE) {
- convertFindData(findData,&blk);
- return (void*)hfile;
- }
- return PM_FILE_INVALID;
-}
-
-/****************************************************************************
-REMARKS:
-Function to find the next file matching a search criteria in a directory.
-****************************************************************************/
-ibool PMAPI PM_findNextFile(
- void *handle,
- PM_findData *findData)
-{
- WIN32_FIND_DATA blk;
-
- if (FindNextFile((HANDLE)handle,&blk)) {
- convertFindData(findData,&blk);
- return true;
- }
- return false;
-}
-
-/****************************************************************************
-REMARKS:
-Function to close the find process
-****************************************************************************/
-void PMAPI PM_findClose(
- void *handle)
-{
- FindClose((HANDLE)handle);
-}
-
-/****************************************************************************
-REMARKS:
-Function to determine if a drive is a valid drive or not. Under Unix this
-function will return false for anything except a value of 3 (considered
-the root drive, and equivalent to C: for non-Unix systems). The drive
-numbering is:
-
- 1 - Drive A:
- 2 - Drive B:
- 3 - Drive C:
- etc
-
-****************************************************************************/
-ibool PMAPI PM_driveValid(
- char drive)
-{
- char buf[5];
- int type;
-
- sprintf(buf,"%c:\\", drive);
- return ((type = GetDriveType(buf)) != 0 && type != 1);
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the current working directory for the specififed drive.
-Under Unix this will always return the current working directory regardless
-of what the value of 'drive' is.
-****************************************************************************/
-void PMAPI PM_getdcwd(
- int drive,
- char *dir,
- int len)
-{
- /* NT stores the current directory for drive N in the magic environment */
- /* variable =N: so we simply look for that environment variable. */
- char envname[4];
-
- envname[0] = '=';
- envname[1] = drive - 1 + 'A';
- envname[2] = ':';
- envname[3] = '\0';
- if (GetEnvironmentVariable(envname,dir,len) == 0) {
- /* The current directory or the drive has not been set yet, so */
- /* simply set it to the root. */
- dir[0] = envname[1];
- dir[1] = ':';
- dir[2] = '\\';
- dir[3] = '\0';
- SetEnvironmentVariable(envname,dir);
- }
-}
-
-/****************************************************************************
-REMARKS:
-Function to change the file attributes for a specific file.
-****************************************************************************/
-void PMAPI PM_setFileAttr(
- const char *filename,
- uint attrib)
-{
- DWORD attr = 0;
-
- if (attrib & PM_FILE_READONLY)
- attr |= FILE_ATTRIBUTE_READONLY;
- if (attrib & PM_FILE_ARCHIVE)
- attr |= FILE_ATTRIBUTE_ARCHIVE;
- if (attrib & PM_FILE_HIDDEN)
- attr |= FILE_ATTRIBUTE_HIDDEN;
- if (attrib & PM_FILE_SYSTEM)
- attr |= FILE_ATTRIBUTE_SYSTEM;
- SetFileAttributes((LPSTR)filename, attr);
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file attributes for a specific file.
-****************************************************************************/
-uint PMAPI PM_getFileAttr(
- const char *filename)
-{
- DWORD attr = GetFileAttributes(filename);
- uint attrib = 0;
-
- if (attr & FILE_ATTRIBUTE_READONLY)
- attrib |= PM_FILE_READONLY;
- if (attr & FILE_ATTRIBUTE_ARCHIVE)
- attrib |= PM_FILE_ARCHIVE;
- if (attr & FILE_ATTRIBUTE_HIDDEN)
- attrib |= PM_FILE_HIDDEN;
- if (attr & FILE_ATTRIBUTE_SYSTEM)
- attrib |= PM_FILE_SYSTEM;
- return attrib;
-}
-
-/****************************************************************************
-REMARKS:
-Function to create a directory.
-****************************************************************************/
-ibool PMAPI PM_mkdir(
- const char *filename)
-{
- return CreateDirectory(filename,NULL);
-}
-
-/****************************************************************************
-REMARKS:
-Function to remove a directory.
-****************************************************************************/
-ibool PMAPI PM_rmdir(
- const char *filename)
-{
- return RemoveDirectory(filename);
-}
-
-/****************************************************************************
-REMARKS:
-Function to get the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_getFileTime(
- const char *filename,
- ibool gmTime,
- PM_time *time)
-{
- HFILE f;
- OFSTRUCT of;
- FILETIME utcTime,localTime;
- SYSTEMTIME sysTime;
- ibool status = false;
-
- of.cBytes = sizeof(of);
- if ((f = OpenFile(filename,&of,OF_READ)) == HFILE_ERROR)
- return false;
- if (!GetFileTime((HANDLE)f,NULL,NULL,&utcTime))
- goto Exit;
- if (!gmTime) {
- if (!FileTimeToLocalFileTime(&utcTime,&localTime))
- goto Exit;
- }
- else
- localTime = utcTime;
- if (!FileTimeToSystemTime(&localTime,&sysTime))
- goto Exit;
- time->year = sysTime.wYear;
- time->mon = sysTime.wMonth-1;
- time->day = sysTime.wYear;
- time->hour = sysTime.wHour;
- time->min = sysTime.wMinute;
- time->sec = sysTime.wSecond;
- status = true;
-
-Exit:
- CloseHandle((HANDLE)f);
- return status;
-}
-
-/****************************************************************************
-REMARKS:
-Function to set the file time and date for a specific file.
-****************************************************************************/
-ibool PMAPI PM_setFileTime(
- const char *filename,
- ibool gmTime,
- PM_time *time)
-{
- HFILE f;
- OFSTRUCT of;
- FILETIME utcTime,localTime;
- SYSTEMTIME sysTime;
- ibool status = false;
-
- of.cBytes = sizeof(of);
- if ((f = OpenFile(filename,&of,OF_WRITE)) == HFILE_ERROR)
- return false;
- sysTime.wYear = time->year;
- sysTime.wMonth = time->mon+1;
- sysTime.wYear = time->day;
- sysTime.wHour = time->hour;
- sysTime.wMinute = time->min;
- sysTime.wSecond = time->sec;
- if (!SystemTimeToFileTime(&sysTime,&localTime))
- goto Exit;
- if (!gmTime) {
- if (!LocalFileTimeToFileTime(&localTime,&utcTime))
- goto Exit;
- }
- else
- utcTime = localTime;
- if (!SetFileTime((HANDLE)f,NULL,NULL,&utcTime))
- goto Exit;
- status = true;
-
-Exit:
- CloseHandle((HANDLE)f);
- return status;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/win32/vflat.c b/board/MAI/bios_emulator/scitech/src/pm/win32/vflat.c
deleted file mode 100644
index 70491cdb80..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/win32/vflat.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Dummy module; no virtual framebuffer for this OS
-*
-****************************************************************************/
-
-#include "pmapi.h"
-
-ibool PMAPI VF_available(void)
-{
- return false;
-}
-
-void * PMAPI VF_init(
- ulong baseAddr,
- int bankSize,
- int codeLen,
- void *bankFunc)
-{
- (void)baseAddr;
- (void)bankSize;
- (void)codeLen;
- (void)bankFunc;
- return NULL;
-}
-
-void PMAPI VF_exit(void)
-{
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/win32/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/win32/ztimer.c
deleted file mode 100644
index 5a901a4422..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/win32/ztimer.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/****************************************************************************
-*
-* Ultra Long Period Timer
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Win32
-*
-* Description: OS specific implementation for the Zen Timer functions.
-*
-****************************************************************************/
-
-/*---------------------------- Global variables ---------------------------*/
-
-static CPU_largeInteger countFreq;
-static ibool havePerformanceCounter;
-static ulong start,finish;
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Initialise the Zen Timer module internals.
-****************************************************************************/
-void __ZTimerInit(void)
-{
-#ifdef NO_ASSEMBLER
- havePerformanceCounter = false;
-#else
- havePerformanceCounter = QueryPerformanceFrequency((LARGE_INTEGER*)&countFreq);
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Start the Zen Timer counting.
-****************************************************************************/
-static void __LZTimerOn(
- LZTimerObject *tm)
-{
- if (havePerformanceCounter)
- QueryPerformanceCounter((LARGE_INTEGER*)&tm->start);
- else
- tm->start.low = timeGetTime();
-}
-
-/****************************************************************************
-REMARKS:
-Compute the lap time since the timer was started.
-****************************************************************************/
-static ulong __LZTimerLap(
- LZTimerObject *tm)
-{
- CPU_largeInteger tmLap,tmCount;
-
- if (havePerformanceCounter) {
- QueryPerformanceCounter((LARGE_INTEGER*)&tmLap);
- _CPU_diffTime64(&tm->start,&tmLap,&tmCount);
- return _CPU_calcMicroSec(&tmCount,countFreq.low);
- }
- else {
- tmLap.low = timeGetTime();
- return (tmLap.low - tm->start.low) * 1000L;
- }
-}
-
-/****************************************************************************
-REMARKS:
-Stop the Zen Timer counting.
-****************************************************************************/
-static void __LZTimerOff(
- LZTimerObject *tm)
-{
- if (havePerformanceCounter)
- QueryPerformanceCounter((LARGE_INTEGER*)&tm->end);
- else
- tm->end.low = timeGetTime();
-}
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time in microseconds between start and end timings.
-****************************************************************************/
-static ulong __LZTimerCount(
- LZTimerObject *tm)
-{
- CPU_largeInteger tmCount;
-
- if (havePerformanceCounter) {
- _CPU_diffTime64(&tm->start,&tm->end,&tmCount);
- return _CPU_calcMicroSec(&tmCount,countFreq.low);
- }
- else
- return (tm->end.low - tm->start.low) * 1000L;
-}
-
-/****************************************************************************
-REMARKS:
-Define the resolution of the long period timer as microseconds per timer tick.
-****************************************************************************/
-#define ULZTIMER_RESOLUTION 1000
-
-/****************************************************************************
-REMARKS:
-Read the Long Period timer from the OS
-****************************************************************************/
-static ulong __ULZReadTime(void)
-{ return timeGetTime(); }
-
-/****************************************************************************
-REMARKS:
-Compute the elapsed time from the BIOS timer tick. Note that we check to see
-whether a midnight boundary has passed, and if so adjust the finish time to
-account for this. We cannot detect if more that one midnight boundary has
-passed, so if this happens we will be generating erronous results.
-****************************************************************************/
-ulong __ULZElapsedTime(ulong start,ulong finish)
-{ return finish - start; }
diff --git a/board/MAI/bios_emulator/scitech/src/pm/x11/event.c b/board/MAI/bios_emulator/scitech/src/pm/x11/event.c
deleted file mode 100644
index b34bfac22f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/x11/event.c
+++ /dev/null
@@ -1,307 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Unix / X11
-*
-* Description: X11 event queue implementation for the MGL.
-* This can be used both for windowed and fullscreen (DGA) modes.
-*
-****************************************************************************/
-
-/*---------------------------- Global Variables ---------------------------*/
-
-static ushort keyUpMsg[256] = {0};/* Table of key up messages */
-static int rangeX,rangeY; /* Range of mouse coordinates */
-
-static Display *_EVT_dpy;
-static Window _EVT_win;
-
-typedef struct {
- int keycode;
- int scancode;
-} xkeymap;
-
-xkeymap xkeymaps[] = {
- { 9, KB_esc},
- {24, KB_Q},
- {25, KB_W},
- {26, KB_E},
- {27, KB_R},
- {28, KB_T},
- {29, KB_Y},
- {30, KB_U},
- {31, KB_I},
- {32, KB_O},
- {33, KB_P},
-};
-
-/*---------------------------- Implementation -----------------------------*/
-
-/* These are not used under non-DOS systems */
-#define _EVT_disableInt() 1
-#define _EVT_restoreInt(flags)
-
-/****************************************************************************
-PARAMETERS:
-scanCode - Scan code to test
-
-REMARKS:
-This macro determines if a specified key is currently down at the
-time that the call is made.
-****************************************************************************/
-#define _EVT_isKeyDown(scanCode) (keyUpMsg[scanCode] != 0)
-
-/****************************************************************************
-REMARKS:
-This function is used to return the number of ticks since system
-startup in milliseconds. This should be the same value that is placed into
-the time stamp fields of events, and is used to implement auto mouse down
-events.
-****************************************************************************/
-ulong _EVT_getTicks(void)
-{
- static unsigned starttime = 0;
- struct timeval t;
-
- gettimeofday(&t, NULL);
- if (starttime == 0)
- starttime = t.tv_sec * 1000 + (t.tv_usec/1000);
- return ((t.tv_sec * 1000 + (t.tv_usec/1000)) - starttime);
-}
-
-static int getScancode(int keycode)
-{
- return keycode-8;
-}
-
-/****************************************************************************
-REMARKS:
-Pumps all messages in the application message queue into our event queue.
-****************************************************************************/
-#ifdef X11_CORE
-static void _EVT_pumpX11Messages(void)
-#else
-static void _EVT_pumpMessages(void)
-#endif
-{
- /* TODO: The purpose of this function is to read all keyboard and mouse */
- /* events from the OS specific event queue, translate them and post */
- /* them into the SciTech event queue. */
- event_t evt;
- XEvent ev;
- static int old_mx = 0, old_my = 0, buts = 0, c;
- char buf[2];
-
- while (XPending(_EVT_dpy) && XNextEvent(_EVT_dpy,&ev)) {
- evt.when = _MGL_getTicks();
-
- switch(ev.type){
- case KeyPress:
- c = getScancode(ev.xkey.keycode);
- evt.what = EVT_KEYDOWN;
- evt.message = c << 8;
- XLookupString(&ev.xkey, buf, 2, NULL, NULL);
- evt.message |= buf[0];
- break;
- case KeyRelease:
- c = getScancode(ev.xkey.keycode);
- evt.what = EVT_KEYUP;
- evt.message = keyUpMsg[c];
- if(count < EVENTQSIZE)
- addEvent(&evt);
- keyUpMsg[c] = 0;
- repeatKey[c] = 0;
- break;
- case ButtonPress:
- evt.what = EVT_MOUSEDOWN;
- if(ev.xbutton.button == 1){
- buts |= EVT_LEFTBUT;
- evt.message = EVT_LEFTBMASK;
- }else if(ev.xbutton.button == 2){
- buts |= EVT_MIDDLEBUT;
- evt.message = EVT_MIDDLEBMASK;
- }else if(ev.xbutton.button == 3){
- buts |= EVT_RIGHTBUT;
- evt.message = EVT_RIGHTBMASK;
- }
- evt.modifiers = modifiers | buts;
-
- break;
- case ButtonRelease:
- evt.what = EVT_MOUSEUP;
- if(ev.xbutton.button == 1){
- buts &= ~EVT_LEFTBUT;
- evt.message = EVT_LEFTBMASK;
- }else if(ev.xbutton.button == 2){
- buts &= ~EVT_MIDDLEBUT;
- evt.message = EVT_MIDDLEBMASK;
- }else if(ev.xbutton.button == 3){
- buts &= ~EVT_RIGHTBUT;
- evt.message = EVT_RIGHTBMASK;
- }
- evt.modifiers = modifiers | buts;
-
- break;
- case MotionNotify:
- evt.what = EVT_MOUSEMOVE;
- evt.where_x = ev.xmotion.x;
- evt.where_y = ev.xmotion.y;
- evt.relative_x = evt.where_x - old_mx;
- evt.relative_y = evt.where_y - old_my;
- old_mx = evt.where_x;
- old_my = evt.where_y;
- break;
- }
- if (count < EVENTQSIZE)
- addEvent(&evt);
- }
-
-}
-
-/****************************************************************************
-REMARKS:
-This macro/function is used to converts the scan codes reported by the
-keyboard to our event libraries normalised format. We only have one scan
-code for the 'A' key, and use shift modifiers to determine if it is a
-Ctrl-F1, Alt-F1 etc. The raw scan codes from the keyboard work this way,
-but the OS gives us 'cooked' scan codes, we have to translate them back
-to the raw format.
-****************************************************************************/
-#define _EVT_maskKeyCode(evt)
-
-/****************************************************************************
-REMARKS:
-Safely abort the event module upon catching a fatal error.
-****************************************************************************/
-void _EVT_abort()
-{
- EVT_exit();
- PM_fatalError("Unhandled exception!");
-}
-
-/****************************************************************************
-PARAMETERS:
-mouseMove - Callback function to call wheneve the mouse needs to be moved
-
-REMARKS:
-Initiliase the event handling module. Here we install our mouse handling ISR
-to be called whenever any button's are pressed or released. We also build
-the free list of events in the event queue.
-
-We use handler number 2 of the mouse libraries interrupt handlers for our
-event handling routines.
-****************************************************************************/
-#ifdef X11_CORE
-void EVTAPI EVT_initX11(
-#else
-void EVTAPI EVT_init(
-#endif
- _EVT_mouseMoveHandler mouseMove)
-{
- int result, i,j,k;
- XDeviceInfoPtr list,slist;
-
- /* Initialise the event queue */
- _mouseMove = mouseMove;
- initEventQueue();
- memset(keyUpMsg,0,sizeof(keyUpMsg));
-
-
- /* query server for input extensions */
- result =XQueryExtension(_EVT_dpy,"XInputExtension",&i,&j,&k);
- if(!result) {
- fprintf(stderr,"Your server doesn't support XInput Extensions\n");
- fprintf(stderr,"X11 Joystick disabled\n");
- }
- list = XListInputDevices(_EVT_dpy,&result);
- if (!list) {
- fprintf(stderr,"No extended input devices found !!\n");
- fprintf(stderr,"X11 Joystick disabled\n");
- }
-
-
- /* Catch program termination signals so we can clean up properly */
- signal(SIGABRT, _EVT_abort);
- signal(SIGFPE, _EVT_abort);
- signal(SIGINT, _EVT_abort);
-}
-
-/****************************************************************************
-REMARKS
-Changes the range of coordinates returned by the mouse functions to the
-specified range of values. This is used when changing between graphics
-modes set the range of mouse coordinates for the new display mode.
-****************************************************************************/
-void EVTAPI EVT_setMouseRange(
- int xRes,
- int yRes)
-{
- rangeX = xRes;
- rangeY = yRes;
-}
-
-/****************************************************************************
-REMARKS:
-Initiailises the internal event handling modules. The EVT_suspend function
-can be called to suspend event handling (such as when shelling out to DOS),
-and this function can be used to resume it again later.
-****************************************************************************/
-void EVT_resume(void)
-{
- /* Do nothing for non DOS systems */
-}
-
-/****************************************************************************
-REMARKS
-Suspends all of our event handling operations. This is also used to
-de-install the event handling code.
-****************************************************************************/
-void EVT_suspend(void)
-{
- /* Do nothing for non DOS systems */
-}
-
-/****************************************************************************
-REMARKS
-Exits the event module for program terminatation.
-****************************************************************************/
-void EVT_exit(void)
-{
- /* Restore signal handlers */
- signal(SIGABRT, SIG_DFL);
- signal(SIGFPE, SIG_DFL);
- signal(SIGINT, SIG_DFL);
-
- /* TODO: Do any OS specific cleanup in here */
-}
-
-/****************************************************************************
-REMARKS
-Sets the current X11 display
-****************************************************************************/
-void EVT_setX11Display(Display *dpy, Window win)
-{
- _EVT_dpy = dpy;
- _EVT_win = win;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/x11/oshdr.h b/board/MAI/bios_emulator/scitech/src/pm/x11/oshdr.h
deleted file mode 100644
index 45d7451be5..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/x11/oshdr.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: BeOS
-*
-* Description: Include file to include all OS specific header files.
-*
-****************************************************************************/
-
-#include <X11/Xlib.h>
-#include <X11/keysym.h>
-#include <time.h>
-#include <signal.h>
-#ifdef USE_OS_JOYSTICK
-#include <X11/extensions/XI.h>
-#include <X11/extensions/XInput.h>
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/pm/z_samples.vpj b/board/MAI/bios_emulator/scitech/src/pm/z_samples.vpj
deleted file mode 100644
index 0c6c80f054..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/z_samples.vpj
+++ /dev/null
@@ -1,74 +0,0 @@
-[SciTech]
-compiler=wc10-
-targetos=d32
-[COMPILER]
-version=5.0b
-MACRO=enable_current_compiler\n
-activeconfig=,getch.exe
-FILTERNAME=Source Files\n
-FILTERPATTERN=*.c;*.cpp;*.cxx;*.prg;*.pas;*.dpr;*.bas;*.java;*.sc;*.e;*.cob;*.html;*.rc\n
-FILTERASSOCIATEFILETYPES=0
-FILTERAPPCOMMAND=\n
-vcsproject=SCC:Perforce SCM://depot
-vcslocalpath=SCC:Perforce SCM:c:\
-compile=concur|capture|:Compile:&Compile,dmake %n.obj
-make=concur|capture|clear|saveall|:Build:&Build,dmake %b
-rebuild=concur|capture|clear|saveall|:Rebuild:&Rebuild,dmake -u %b
-debug=concur|capture|savenone|nochangedir|:Debug:&Debug,wdn %b
-execute=hide|savenone|nochangedir|:Execute:E&xecute,
-user1=hide|nochangedir|:User 1:User 1,
-user2=hide|nochangedir|:User 2:User 2,
-usertool_build_all=concur|capture|clear|savenone|:Build All:Build All,dmake all
-usertool_rebuild_all=concur|capture|clear|savenone|:Rebuild All:Rebuild All,dmake -u all
-usertool_clean_directory=concur|capture|savenone|:Clean Directory:&Clean Directory,dmake cleanexe
-workingdir=.
-includedirs=%(SCITECH)\include;%(PRIVATE)\include
-reffile=
-[FILES]
-tests\altbrk.c
-tests\altcrit.c
-tests\biosptr.c
-tests\block.c
-tests\brk.c
-tests\callreal.c
-tests\checks.c
-tests\cpu.c
-tests\critical.c
-tests\getch.c
-tests\isvesa.c
-tests\key.c
-tests\key15.c
-tests\memtest.c
-tests\mouse.c
-tests\rtc.c
-tests\showpci.c
-tests\tick.c
-tests\timerc.c
-tests\timercpp.cpp
-tests\uswc.c
-tests\vftest.c
-tests\video.c
-[ASSOCIATION]
-[CONFIGURATIONS]
-config=,altbrk.exe
-config=,altcrit.exe
-config=,biosptr.exe
-config=,block.exe
-config=,brk.exe
-config=,callreal.exe
-config=,cpu.exe
-config=,critical.exe
-config=,getch.exe
-config=,isvesa.exe
-config=,key.exe
-config=,key15.exe
-config=,memtest.exe
-config=,mouse.exe
-config=,rtc.exe
-config=,showpci.exe
-config=,tick.exe
-config=,timerc.exe
-config=,timercpp.exe
-config=,uswc.exe
-config=,vftest.exe
-config=,video.exe
diff --git a/board/MAI/bios_emulator/scitech/src/pm/ztimer.c b/board/MAI/bios_emulator/scitech/src/pm/ztimer.c
deleted file mode 100644
index 5acf7b1f0c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/pm/ztimer.c
+++ /dev/null
@@ -1,516 +0,0 @@
-/****************************************************************************
-*
-* SciTech OS Portability Manager Library
-*
-* ========================================================================
-*
-* The contents of this file are subject to the SciTech MGL Public
-* License Version 1.0 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.scitechsoft.com/mgl-license.txt
-*
-* Software distributed under the License is distributed on an
-* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
-*
-* The Initial Developer of the Original Code is SciTech Software, Inc.
-* All Rights Reserved.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-*
-* Description: Module to implement high precision timing on each OS.
-*
-****************************************************************************/
-
-#include "ztimer.h"
-#include "pmapi.h"
-#include "oshdr.h"
-
-/*---------------------------- Global variables ---------------------------*/
-
-static LZTimerObject LZTimer;
-static ulong start,finish;
-#ifdef __INTEL__
-static long cpuSpeed = -1;
-static ibool haveRDTSC = false;
-#endif
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* External Intel assembler functions */
-#ifdef __INTEL__
-/* {secret} */
-void _ASMAPI _CPU_readTimeStamp(CPU_largeInteger *time);
-/* {secret} */
-ulong _ASMAPI _CPU_diffTime64(CPU_largeInteger *t1,CPU_largeInteger *t2,CPU_largeInteger *t);
-/* {secret} */
-ulong _ASMAPI _CPU_calcMicroSec(CPU_largeInteger *count,ulong freq);
-#endif
-
-#if defined(__SMX32__)
-#include "smx/ztimer.c"
-#elif defined(__RTTARGET__)
-#include "rttarget/ztimer.c"
-#elif defined(__REALDOS__)
-#include "dos/ztimer.c"
-#elif defined(__NT_DRIVER__)
-#include "ntdrv/ztimer.c"
-#elif defined(__WIN32_VXD__)
-#include "vxd/ztimer.c"
-#elif defined(__WINDOWS32__)
-#include "win32/ztimer.c"
-#elif defined(__OS2_VDD__)
-#include "vdd/ztimer.c"
-#elif defined(__OS2__)
-#include "os2/ztimer.c"
-#elif defined(__LINUX__)
-#include "linux/ztimer.c"
-#elif defined(__QNX__)
-#include "qnx/ztimer.c"
-#elif defined(__BEOS__)
-#include "beos/ztimer.c"
-#else
-#error Timer library not ported to this platform yet!
-#endif
-
-/*------------------------ Public interface routines ----------------------*/
-
-/****************************************************************************
-DESCRIPTION:
-Initializes the Zen Timer library (extended)
-
-PARAMETERS:
-accurate - True of the speed should be measured accurately
-
-HEADER:
-ztimer.h
-
-REMARKS:
-This function initializes the Zen Timer library, and /must/ be called before
-any of the remaining Zen Timer library functions are called. The accurate
-parameter is used to determine whether highly accurate timing should be
-used or not. If high accuracy is needed, more time is spent profiling the
-actual speed of the CPU so that we can obtain highly accurate timing
-results, but the time spent in the initialisation routine will be
-significantly longer (on the order of 5 seconds).
-****************************************************************************/
-void ZAPI ZTimerInitExt(
- ibool accurate)
-{
- if (cpuSpeed == -1) {
- __ZTimerInit();
-#ifdef __INTEL__
- cpuSpeed = CPU_getProcessorSpeedInHZ(accurate);
- haveRDTSC = CPU_haveRDTSC() && (cpuSpeed > 0);
-#endif
- }
-}
-
-/****************************************************************************
-DESCRIPTION:
-Initializes the Zen Timer library.
-
-HEADER:
-ztimer.h
-
-REMARKS:
-This function initializes the Zen Timer library, and /must/ be called before
-any of the remaining Zen Timer library functions are called.
-****************************************************************************/
-void ZAPI ZTimerInit(void)
-{
- ZTimerInitExt(false);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Starts the Long Period Zen Timer counting.
-
-HEADER:
-ztimer.h
-
-PARAMETERS:
-tm - Timer object to start timing with
-
-REMARKS:
-Starts the Long Period Zen Timer counting. Once you have started the timer,
-you can stop it with LZTimerOff or you can latch the current count with
-LZTimerLap.
-
-The Long Period Zen Timer uses a number of different high precision timing
-mechanisms to obtain microsecond accurate timings results whenever possible.
-The following different techniques are used depending on the operating
-system, runtime environment and CPU on the target machine. If the target
-system has a Pentium CPU installed which supports the Read Time Stamp
-Counter instruction (RDTSC), the Zen Timer library will use this to
-obtain the maximum timing precision available.
-
-Under 32-bit Windows, if the Pentium RDTSC instruction is not available, we
-first try to use the Win32 QueryPerformanceCounter API, and if that is not
-available we fall back on the timeGetTime API which is always supported.
-
-Under 32-bit DOS, if the Pentium RDTSC instruction is not available, we
-then do all timing using the old style 8253 timer chip. The 8253 timer
-routines provide highly accurate timings results in pure DOS mode, however
-in a DOS box under Windows or other Operating Systems the virtualization
-of the timer can produce inaccurate results.
-
-Note: Because the Long Period Zen Timer stores the results in a 32-bit
- unsigned integer, you can only time periods of up to 2^32 microseconds,
- or about 1hr 20mins. For timing longer periods use the Ultra Long
- Period Zen Timer.
-
-SEE ALSO:
-LZTimerOff, LZTimerLap, LZTimerCount
-****************************************************************************/
-void ZAPI LZTimerOnExt(
- LZTimerObject *tm)
-{
-#ifdef __INTEL__
- if (haveRDTSC) {
- _CPU_readTimeStamp(&tm->start);
- }
- else
-#endif
- __LZTimerOn(tm);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns the current count for the Long Period Zen Timer and keeps it
-running.
-
-HEADER:
-ztimer.h
-
-PARAMETERS:
-tm - Timer object to do lap timing with
-
-RETURNS:
-Count that has elapsed in microseconds.
-
-REMARKS:
-Returns the current count that has elapsed since the last call to
-LZTimerOn in microseconds. The time continues to run after this function is
-called so you can call this function repeatedly.
-
-SEE ALSO:
-LZTimerOn, LZTimerOff, LZTimerCount
-****************************************************************************/
-ulong ZAPI LZTimerLapExt(
- LZTimerObject *tm)
-{
-#ifdef __INTEL__
- CPU_largeInteger tmLap,tmCount;
-
- if (haveRDTSC) {
- _CPU_readTimeStamp(&tmLap);
- _CPU_diffTime64(&tm->start,&tmLap,&tmCount);
- return _CPU_calcMicroSec(&tmCount,cpuSpeed);
- }
- else
-#endif
- return __LZTimerLap(tm);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Stops the Long Period Zen Timer counting.
-
-HEADER:
-ztimer.h
-
-PARAMETERS:
-tm - Timer object to stop timing with
-
-REMARKS:
-Stops the Long Period Zen Timer counting and latches the count. Once you
-have stopped the timer you can read the count with LZTimerCount. If you need
-highly accurate timing, you should use the on and off functions rather than
-the lap function since the lap function does not subtract the overhead of
-the function calls from the timed count.
-
-SEE ALSO:
-LZTimerOn, LZTimerLap, LZTimerCount
-****************************************************************************/
-void ZAPI LZTimerOffExt(
- LZTimerObject *tm)
-{
-#ifdef __INTEL__
- if (haveRDTSC) {
- _CPU_readTimeStamp(&tm->end);
- }
- else
-#endif
- __LZTimerOff(tm);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Returns the current count for the Long Period Zen Timer.
-
-HEADER:
-ztimer.h
-
-PARAMETERS:
-tm - Timer object to compute the elapsed time with.
-
-RETURNS:
-Count that has elapsed in microseconds.
-
-REMARKS:
-Returns the current count that has elapsed between calls to
-LZTimerOn and LZTimerOff in microseconds.
-
-SEE ALSO:
-LZTimerOn, LZTimerOff, LZTimerLap
-****************************************************************************/
-ulong ZAPI LZTimerCountExt(
- LZTimerObject *tm)
-{
-#ifdef __INTEL__
- CPU_largeInteger tmCount;
-
- if (haveRDTSC) {
- _CPU_diffTime64(&tm->start,&tm->end,&tmCount);
- return _CPU_calcMicroSec(&tmCount,cpuSpeed);
- }
- else
-#endif
- return __LZTimerCount(tm);
-}
-
-/****************************************************************************
-DESCRIPTION:
-Starts the Long Period Zen Timer counting.
-
-HEADER:
-ztimer.h
-
-REMARKS:
-Obsolete function. You should use the LZTimerOnExt function instead
-which allows for multiple timers running at the same time.
-****************************************************************************/
-void ZAPI LZTimerOn(void)
-{ LZTimerOnExt(&LZTimer); }
-
-/****************************************************************************
-DESCRIPTION:
-Returns the current count for the Long Period Zen Timer and keeps it
-running.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-Count that has elapsed in microseconds.
-
-REMARKS:
-Obsolete function. You should use the LZTimerLapExt function instead
-which allows for multiple timers running at the same time.
-****************************************************************************/
-ulong ZAPI LZTimerLap(void)
-{ return LZTimerLapExt(&LZTimer); }
-
-/****************************************************************************
-DESCRIPTION:
-Stops the Long Period Zen Timer counting.
-
-HEADER:
-ztimer.h
-
-REMARKS:
-Obsolete function. You should use the LZTimerOffExt function instead
-which allows for multiple timers running at the same time.
-****************************************************************************/
-void ZAPI LZTimerOff(void)
-{ LZTimerOffExt(&LZTimer); }
-
-/****************************************************************************
-DESCRIPTION:
-Returns the current count for the Long Period Zen Timer.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-Count that has elapsed in microseconds.
-
-REMARKS:
-Obsolete function. You should use the LZTimerCountExt function instead
-which allows for multiple timers running at the same time.
-****************************************************************************/
-ulong ZAPI LZTimerCount(void)
-{ return LZTimerCountExt(&LZTimer); }
-
-/****************************************************************************
-DESCRIPTION:
-Starts the Ultra Long Period Zen Timer counting.
-
-HEADER:
-ztimer.h
-
-REMARKS:
-Starts the Ultra Long Period Zen Timer counting. Once you have started the
-timer, you can stop it with ULZTimerOff or you can latch the current count
-with ULZTimerLap.
-
-The Ultra Long Period Zen Timer uses the available operating system services
-to obtain accurate timings results with as much precision as the operating
-system provides, but with enough granularity to time longer periods of
-time than the Long Period Zen Timer. Note that the resolution of the timer
-ticks is not constant between different platforms, and you should use the
-ULZTimerResolution function to determine the number of seconds in a single
-tick of the timer, and use this to convert the timer counts to seconds.
-
-Under 32-bit Windows, we use the timeGetTime function which provides a
-resolution of 1 millisecond (0.001 of a second). Given that the timer
-count is returned as an unsigned 32-bit integer, this we can time intervals
-that are a maximum of 2^32 milliseconds in length (or about 1,200 hours or
-50 days!).
-
-Under 32-bit DOS, we use the system timer tick which runs at 18.2 times per
-second. Given that the timer count is returned as an unsigned 32-bit integer,
-this we can time intervals that are a maximum of 2^32 * (1/18.2) in length
-(or about 65,550 hours or 2731 days!).
-
-SEE ALSO:
-ULZTimerOff, ULZTimerLap, ULZTimerCount, ULZElapsedTime, ULZReadTime
-****************************************************************************/
-void ZAPI ULZTimerOn(void)
-{ start = __ULZReadTime(); }
-
-/****************************************************************************
-DESCRIPTION:
-Returns the current count for the Ultra Long Period Zen Timer and keeps it
-running.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-Count that has elapsed in resolution counts.
-
-REMARKS:
-Returns the current count that has elapsed since the last call to
-ULZTimerOn in microseconds. The time continues to run after this function is
-called so you can call this function repeatedly.
-
-SEE ALSO:
-ULZTimerOn, ULZTimerOff, ULZTimerCount
-****************************************************************************/
-ulong ZAPI ULZTimerLap(void)
-{ return (__ULZReadTime() - start); }
-
-/****************************************************************************
-DESCRIPTION:
-Stops the Long Period Zen Timer counting.
-
-HEADER:
-ztimer.h
-
-REMARKS:
-Stops the Ultra Long Period Zen Timer counting and latches the count. Once
-you have stopped the timer you can read the count with ULZTimerCount.
-
-SEE ALSO:
-ULZTimerOn, ULZTimerLap, ULZTimerCount
-****************************************************************************/
-void ZAPI ULZTimerOff(void)
-{ finish = __ULZReadTime(); }
-
-/****************************************************************************
-DESCRIPTION:
-Returns the current count for the Ultra Long Period Zen Timer.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-Count that has elapsed in resolution counts.
-
-REMARKS:
-Returns the current count that has elapsed between calls to
-ULZTimerOn and ULZTimerOff in resolution counts.
-
-SEE ALSO:
-ULZTimerOn, ULZTimerOff, ULZTimerLap, ULZTimerResolution
-****************************************************************************/
-ulong ZAPI ULZTimerCount(void)
-{ return (finish - start); }
-
-/****************************************************************************
-DESCRIPTION:
-Reads the current time from the Ultra Long Period Zen Timer.
-
-HEADER:
-ztimer.h
-
-RETURNS:
-Current timer value in resolution counts.
-
-REMARKS:
-Reads the current Ultra Long Period Zen Timer and returns it’s current
-count. You can use the ULZElapsedTime function to find the elapsed time
-between two timer count readings.
-
-SEE ALSO:
-ULZElapsedTime, ULZTimerResolution
-****************************************************************************/
-ulong ZAPI ULZReadTime(void)
-{ return __ULZReadTime(); }
-
-/****************************************************************************
-DESCRIPTION:
-Compute the elapsed time between two timer counts.
-
-HEADER:
-ztimer.h
-
-PARAMETERS:
-start - Starting time for elapsed count
-finish - Ending time for elapsed count
-
-RETURNS:
-Elapsed timer in resolution counts.
-
-REMARKS:
-Returns the elapsed time for the Ultra Long Period Zen Timer in units of the
-timers resolution (1/18th of a second under DOS). This function correctly
-computes the difference even if a midnight boundary has been crossed
-during the timing period.
-
-SEE ALSO:
-ULZReadTime, ULZTimerResolution
-****************************************************************************/
-ulong ZAPI ULZElapsedTime(
- ulong start,
- ulong finish)
-{ return __ULZElapsedTime(start,finish); }
-
-/****************************************************************************
-DESCRIPTION:
-Returns the resolution of the Ultra Long Period Zen Timer.
-
-HEADER:
-ztimer.h
-
-PARAMETERS:
-resolution - Place to store the timer in microseconds per timer count.
-
-REMARKS:
-Returns the resolution of the Ultra Long Period Zen Timer as a 32-bit
-integer value measured in microseconds per timer count.
-
-SEE ALSO:
-ULZReadTime, ULZElapsedTime, ULZTimerCount
-****************************************************************************/
-void ZAPI ULZTimerResolution(
- ulong *resolution)
-{ *resolution = ULZTIMER_RESOLUTION; }
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/AsmMacros.h b/board/MAI/bios_emulator/scitech/src/v86bios/AsmMacros.h
deleted file mode 100644
index 77c545aef4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/AsmMacros.h
+++ /dev/null
@@ -1,450 +0,0 @@
-/* $XConsortium: AsmMacros.h /main/13 1996/10/25 11:33:12 kaleb $ */
-/*
- * (c) Copyright 1993,1994 by David Wexelblat <dwex@xfree86.org>
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * DAVID WEXELBLAT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
- * OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- *
- * Except as contained in this notice, the name of David Wexelblat shall not be
- * used in advertising or otherwise to promote the sale, use or other dealings
- * in this Software without prior written authorization from David Wexelblat.
- *
- */
-/*
- * Copyright 1997
- * Digital Equipment Corporation. All rights reserved.
- * This software is furnished under license and may be used and copied only in
- * accordance with the following terms and conditions. Subject to these
- * conditions, you may download, copy, install, use, modify and distribute
- * this software in source and/or binary form. No title or ownership is
- * transferred hereby.
- *
- * 1) Any source code used, modified or distributed must reproduce and retain
- * this copyright notice and list of conditions as they appear in the source
- * file.
- *
- * 2) No right is granted to use any trade name, trademark, or logo of Digital
- * Equipment Corporation. Neither the "Digital Equipment Corporation" name
- * nor any trademark or logo of Digital Equipment Corporation may be used
- * to endorse or promote products derived from this software without the
- * prior written permission of Digital Equipment Corporation.
- *
- * 3) This software is provided "AS-IS" and any express or implied warranties,
- * including but not limited to, any implied warranties of merchantability,
- * fitness for a particular purpose, or non-infringement are disclaimed. In
- * no event shall DIGITAL be liable for any damages whatsoever, and in
- * particular, DIGITAL shall not be liable for special, indirect,
- * consequential, or incidental damages or damages for
- * lost profits, loss of revenue or loss of use, whether such damages arise
- * in contract,
- * negligence, tort, under statute, in equity, at law or otherwise, even if
- * advised of the possibility of such damage.
- *
- */
-
-/* $XFree86: xc/programs/Xserver/hw/xfree86/SuperProbe/AsmMacros.h,v 3.14 1999/09/25 14:36:58 dawes Exp $ */
-
-#if defined(__GNUC__)
-#if defined(linux) && (defined(__alpha__) || defined(__ia64__))
-#undef inb
-#define inb _inb
-#undef inw
-#define inw _inw
-#undef inl
-#define inl _inl
-#undef outb
-#define outb(p,v) _outb((v),(p))
-#undef outw
-#define outw(p,v) _outw((v),(p))
-#undef outl
-#define outl(p,v) _outl((v),(p))
-#else
-#if defined(__sparc__)
-#ifndef ASI_PL
-#define ASI_PL 0x88
-#endif
-
-static __inline__ void
-outb(port, val)
-unsigned long port;
-char val;
-{
- __asm__ __volatile__("stba %0, [%1] %2" : : "r" (val), "r" (port), "i" (ASI_PL));
-}
-
-static __inline__ void
-outw(port, val)
-unsigned long port;
-char val;
-{
- __asm__ __volatile__("stha %0, [%1] %2" : : "r" (val), "r" (port), "i" (ASI_PL));
-}
-
-static __inline__ void
-outl(port, val)
-unsigned long port;
-char val;
-{
- __asm__ __volatile__("sta %0, [%1] %2" : : "r" (val), "r" (port), "i" (ASI_PL));
-}
-
-static __inline__ unsigned int
-inb(port)
-unsigned long port;
-{
- unsigned char ret;
- __asm__ __volatile__("lduba [%1] %2, %0" : "=r" (ret) : "r" (port), "i" (ASI_PL));
- return ret;
-}
-
-static __inline__ unsigned int
-inw(port)
-unsigned long port;
-{
- unsigned char ret;
- __asm__ __volatile__("lduha [%1] %2, %0" : "=r" (ret) : "r" (port), "i" (ASI_PL));
- return ret;
-}
-
-static __inline__ unsigned int
-inl(port)
-unsigned long port;
-{
- unsigned char ret;
- __asm__ __volatile__("lda [%1] %2, %0" : "=r" (ret) : "r" (port), "i" (ASI_PL));
- return ret;
-}
-#else
-#ifdef __arm32__
-unsigned int IOPortBase; /* Memory mapped I/O port area */
-
-static __inline__ void
-outb(port, val)
- short port;
- char val;
-{
- if ((unsigned short)port >= 0x400) return;
-
- *(volatile unsigned char*)(((unsigned short)(port))+IOPortBase) = val;
-}
-
-static __inline__ void
-outw(port, val)
- short port;
- short val;
-{
- if ((unsigned short)port >= 0x400) return;
-
- *(volatile unsigned short*)(((unsigned short)(port))+IOPortBase) = val;
-}
-
-static __inline__ void
-outl(port, val)
- short port;
- int val;
-{
- if ((unsigned short)port >= 0x400) return;
-
- *(volatile unsigned long*)(((unsigned short)(port))+IOPortBase) = val;
-}
-
-static __inline__ unsigned int
-inb(port)
- short port;
-{
- if ((unsigned short)port >= 0x400) return((unsigned int)-1);
-
- return(*(volatile unsigned char*)(((unsigned short)(port))+IOPortBase));
-}
-
-static __inline__ unsigned int
-inw(port)
- short port;
-{
- if ((unsigned short)port >= 0x400) return((unsigned int)-1);
-
- return(*(volatile unsigned short*)(((unsigned short)(port))+IOPortBase));
-}
-
-static __inline__ unsigned int
-inl(port)
- short port;
-{
- if ((unsigned short)port >= 0x400) return((unsigned int)-1);
-
- return(*(volatile unsigned long*)(((unsigned short)(port))+IOPortBase));
-}
-#else /* __arm32__ */
-#if defined(Lynx) && defined(__powerpc__)
-extern unsigned char *ioBase;
-
-static volatile void
-eieio()
-{
- __asm__ __volatile__ ("eieio");
-}
-
-static void
-outb(port, value)
-short port;
-unsigned char value;
-{
- *(uchar *)(ioBase + port) = value; eieio();
-}
-
-static void
-outw(port, value)
-short port;
-unsigned short value;
-{
- *(unsigned short *)(ioBase + port) = value; eieio();
-}
-
-static void
-outl(port, value)
-short port;
-unsigned long value;
-{
- *(unsigned long *)(ioBase + port) = value; eieio();
-}
-
-static unsigned char
-inb(port)
-short port;
-{
- unsigned char val;
-
- val = *((unsigned char *)(ioBase + port)); eieio();
- return(val);
-}
-
-static unsigned short
-inw(port)
-short port;
-{
- unsigned short val;
-
- val = *((unsigned short *)(ioBase + port)); eieio();
- return(val);
-}
-
-static unsigned long
-inl(port)
-short port;
-{
- unsigned long val;
-
- val = *((unsigned long *)(ioBase + port)); eieio();
- return(val);
-}
-
-#else
-#if defined(__FreeBSD__) && defined(__alpha__)
-
-#include <sys/types.h>
-
-extern void outb(u_int32_t port, u_int8_t val);
-extern void outw(u_int32_t port, u_int16_t val);
-extern void outl(u_int32_t port, u_int32_t val);
-extern u_int8_t inb(u_int32_t port);
-extern u_int16_t inw(u_int32_t port);
-extern u_int32_t inl(u_int32_t port);
-
-#else
-#ifdef GCCUSESGAS
-static __inline__ void
-outb(port, val)
-short port;
-char val;
-{
- __asm__ __volatile__("outb %0,%1" : :"a" (val), "d" (port));
-}
-
-static __inline__ void
-outw(port, val)
-short port;
-short val;
-{
- __asm__ __volatile__("outw %0,%1" : :"a" (val), "d" (port));
-}
-
-static __inline__ void
-outl(port, val)
-short port;
-unsigned int val;
-{
- __asm__ __volatile__("outl %0,%1" : :"a" (val), "d" (port));
-}
-
-static __inline__ unsigned int
-inb(port)
-short port;
-{
- unsigned char ret;
- __asm__ __volatile__("inb %1,%0" :
- "=a" (ret) :
- "d" (port));
- return ret;
-}
-
-static __inline__ unsigned int
-inw(port)
-short port;
-{
- unsigned short ret;
- __asm__ __volatile__("inw %1,%0" :
- "=a" (ret) :
- "d" (port));
- return ret;
-}
-
-static __inline__ unsigned int
-inl(port)
-short port;
-{
- unsigned int ret;
- __asm__ __volatile__("inl %1,%0" :
- "=a" (ret) :
- "d" (port));
- return ret;
-}
-
-#else /* GCCUSESGAS */
-
-static __inline__ void
-outb(port, val)
- short port;
- char val;
-{
- __asm__ __volatile__("out%B0 (%1)" : :"a" (val), "d" (port));
-}
-
-static __inline__ void
-outw(port, val)
- short port;
- short val;
-{
- __asm__ __volatile__("out%W0 (%1)" : :"a" (val), "d" (port));
-}
-
-static __inline__ void
-outl(port, val)
- short port;
- unsigned int val;
-{
- __asm__ __volatile__("out%L0 (%1)" : :"a" (val), "d" (port));
-}
-
-static __inline__ unsigned int
-inb(port)
- short port;
-{
- unsigned int ret;
- __asm__ __volatile__("in%B0 (%1)" :
- "=a" (ret) :
- "d" (port));
- return ret;
-}
-
-static __inline__ unsigned int
-inw(port)
- short port;
-{
- unsigned int ret;
- __asm__ __volatile__("in%W0 (%1)" :
- "=a" (ret) :
- "d" (port));
- return ret;
-}
-
-static __inline__ unsigned int
-inl(port)
- short port;
-{
- unsigned int ret;
- __asm__ __volatile__("in%L0 (%1)" :
- "=a" (ret) :
- "d" (port));
- return ret;
-}
-
-#endif /* GCCUSESGAS */
-#endif /* Lynx && __powerpc__ */
-#endif /* arm32 */
-#endif /* linux && __sparc__ */
-#endif /* linux && __alpha__ */
-#endif /* __FreeBSD__ && __alpha__ */
-
-#if defined(linux) || defined(__arm32__) || (defined(Lynx) && defined(__powerpc__))
-
-#define intr_disable()
-#define intr_enable()
-
-#else
-
-static __inline__ void
-intr_disable()
-{
- __asm__ __volatile__("cli");
-}
-
-static __inline__ void
-intr_enable()
-{
- __asm__ __volatile__("sti");
-}
-
-#endif /* else !linux && !__arm32__ */
-
-#else /* __GNUC__ */
-
-#if defined(_MINIX) && defined(_ACK)
-
-/* inb, outb, inw and outw are defined in the library */
-/* ... but I've no idea if the same is true for inl & outl */
-
-u8_t inb(U16_t);
-void outb(U16_t, U8_t);
-u16_t inw(U16_t);
-void outw(U16_t, U16_t);
-u32_t inl(U16_t);
-void outl(U16_t, U32_t);
-
-#else /* not _MINIX and _ACK */
-
-# if defined(__STDC__) && (__STDC__ == 1)
-# ifndef NCR
-# define asm __asm
-# endif
-# endif
-# ifdef SVR4
-# include <sys/types.h>
-# ifndef __USLC__
-# define __USLC__
-# endif
-# endif
-#ifndef SCO325
-# include <sys/inline.h>
-#else
-# include "../common/scoasm.h"
-#endif
-#define intr_disable() asm("cli")
-#define intr_enable() asm("sti")
-
-#endif /* _MINIX and _ACK */
-#endif /* __GNUC__ */
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/README b/board/MAI/bios_emulator/scitech/src/v86bios/README
deleted file mode 100644
index cb65674b2d..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/README
+++ /dev/null
@@ -1,32 +0,0 @@
-
-This is a preliminary version of a VGA softbooter for LINUX.
-
-It makes use of the of the vm86() call and is therefore only
-usable on ix86 systems.
-There are plans to port this program to use a x86 emulator
-like x86emu. Also it may be ported to other operating systems.
-
-So far it has been tested on a small number of cards. It might
-well be that it will fail on your card.
-
-If you need to make modifications to the programs to be able
-to boot your card please let the author know.
-
-So far there is no command line interface. All options need
-to be hardcoded. You can do this by editing debug.h. You can
-turn on a bunch of debug output. Other options allow you to
-boot the primary card (CONFIG_ACTIVE_DEVICE), save the bios
-to a file (SAVE_BIOS), and map the original system bios
-(MAP_SYS_BIOS).
-
-The author wants to thank
- Hans Lermen (dosemu)
- and
- Kendall Bennett (x86emu)
-for their support.
-
-Parts of the code - especially in v86.c and io.c - are based on code
-taken from dosemu. Parts of the code in int.c are based on code taken
-from x86emu
-
-Egbert Eich. <Egbert.Eich@Physik.TU-Darmstadt.DE>
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/awk.scr b/board/MAI/bios_emulator/scitech/src/v86bios/awk.scr
deleted file mode 100644
index 9d2a80d7d8..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/awk.scr
+++ /dev/null
@@ -1,15 +0,0 @@
-/.*\(0x3da.*/||/.*\(0x3ba.*/ {
- if (v_3da != 1) print "_v_retrace_";
- v_3da = 1;
- next;
- }
-/.*\(0x42.*/||/.*\(0x43.*/ {
- if (v_4x != 1) print "_timer_";
- v_4x = 1;
- next;
-}
-{
- print;
- v_3da = 0;
- v_4x = 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/cbios.c b/board/MAI/bios_emulator/scitech/src/v86bios/cbios.c
deleted file mode 100644
index 6b12dff4f9..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/cbios.c
+++ /dev/null
@@ -1,415 +0,0 @@
-#include <unistd.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <sys/mman.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-#include <signal.h>
-#include <sys/stat.h>
-#include <getopt.h>
-#if defined(__alpha__) || defined (__ia64__)
-#include <sys/io.h>
-#elif defined(HAVE_SYS_PERM)
-#include <sys/perm.h>
-#endif
-#include "debug.h"
-#include "v86bios.h"
-#include "pci.h"
-#include "AsmMacros.h"
-
-#define SIZE 0x100000
-#define VRAM_START 0xA0000
-#define VRAM_SIZE 0x1FFFF
-#define V_BIOS_SIZE 0x1FFFF
-#define BIOS_START 0x7C00 /* default BIOS entry */
-#define BIOS_MEM 0x600
-
-CARD8 code[] = { 0xcd, 0x10, 0xf4 };
-struct config Config;
-
-static int map(void);
-static void unmap(void);
-static void runBIOS(int argc, char **argv);
-static int map_vram(void);
-static void unmap_vram(void);
-static int copy_vbios(memType base);
-static int copy_sys_bios(void);
-static CARD32 setup_int_vect(void);
-static void update_bios_vars(void);
-static int chksum(CARD8 *start);
-static void setup_bios_regs(i86biosRegsPtr regs, int argc, char **argv);
-static void print_regs(i86biosRegsPtr regs);
-void dprint(unsigned long start, unsigned long size);
-
-void loadCodeToMem(unsigned char *ptr, CARD8 *code);
-
-static int vram_mapped = 0;
-static char* bios_var;
-
-
-int
-main(int argc,char **argv)
-{
- CARD32 vbios_base;
-
- Config.PrintPort = PRINT_PORT;
- Config.IoStatistics = IO_STATISTICS;
- Config.PrintIrq = PRINT_IRQ;
- Config.PrintPci = PRINT_PCI;
- Config.ShowAllDev = SHOW_ALL_DEV;
- Config.PrintIp = PRINT_IP;
- Config.SaveBios = SAVE_BIOS;
- Config.Trace = TRACE;
- Config.ConfigActiveOnly = CONFIG_ACTIVE_ONLY;
- Config.ConfigActiveDevice = CONFIG_ACTIVE_DEVICE;
- Config.MapSysBios = MAP_SYS_BIOS;
- Config.Resort = RESORT;
- Config.FixRom = FIX_ROM;
- Config.NoConsole = NO_CONSOLE;
- Config.Verbose = VERBOSE;
-
- if (!map())
- exit(1);
- if (!copy_sys_bios())
- exit(1);
- if (!(vbios_base = setup_int_vect()))
- exit(1);
- if (!map_vram())
- exit(1);
- if (!copy_vbios(vbios_base))
- exit(1);
-
- iopl(3);
- setup_io();
- runBIOS(argc,argv);
- update_bios_vars();
- unmap_vram();
- iopl(0);
- unmap();
- printf("done !\n");
- exit (1);
-}
-
-int
-map(void)
-{
- void* mem;
-
- mem = mmap(0, (size_t)SIZE,
- PROT_EXEC | PROT_READ | PROT_WRITE,
- MAP_FIXED | MAP_PRIVATE | MAP_ANON,
- -1, 0 );
- if (mem != 0) {
- perror("anonymous map");
- return (0);
- }
- memset(mem,0,SIZE);
-
- loadCodeToMem((unsigned char *) BIOS_START, code);
- return (1);
-}
-
-static int
-copy_sys_bios(void)
-{
-#define SYS_BIOS 0xF0000
- int mem_fd;
-
- if ((mem_fd = open(MEM_FILE,O_RDONLY))<0) {
- perror("opening memory");
- return (0);
- }
-
- if (lseek(mem_fd,(off_t) SYS_BIOS,SEEK_SET) != (off_t) SYS_BIOS)
- goto Error;
- if (read(mem_fd, (char *)SYS_BIOS, (size_t) 0xFFFF) != (size_t) 0xFFFF)
- goto Error;
-
- close(mem_fd);
- return (1);
-
-Error:
- perror("sys_bios");
- close(mem_fd);
- return (0);
-}
-
-static int
-map_vram(void)
-{
- int mem_fd;
-
-#ifdef __ia64__
- if ((mem_fd = open(MEM_FILE,O_RDWR | O_SYNC))<0)
-#else
- if ((mem_fd = open(MEM_FILE,O_RDWR))<0)
-#endif
- {
- perror("opening memory");
- return 0;
- }
-
-#ifndef __alpha__
- if (mmap((void *) VRAM_START, (size_t) VRAM_SIZE,
- PROT_EXEC | PROT_READ | PROT_WRITE, MAP_SHARED | MAP_FIXED,
- mem_fd, VRAM_START) == (void *) -1)
-#else
- if (!_bus_base()) sparse_shift = 7; /* Uh, oh, JENSEN... */
- if (!_bus_base_sparse()) sparse_shift = 0;
- if ((vram_map = mmap(0,(size_t) (VRAM_SIZE << sparse_shift),
- PROT_READ | PROT_WRITE,
- MAP_SHARED,
- mem_fd, (VRAM_START << sparse_shift)
- | _bus_base_sparse())) == (void *) -1)
-#endif
- {
- perror("mmap error in map_hardware_ram");
- close(mem_fd);
- return (0);
- }
- vram_mapped = 1;
- close(mem_fd);
- return (1);
-}
-
-static int
-copy_vbios(memType v_base)
-{
- int mem_fd;
- unsigned char *tmp;
- int size;
-
- if ((mem_fd = open(MEM_FILE,O_RDONLY))<0) {
- perror("opening memory");
- return (0);
- }
-
- if (lseek(mem_fd,(off_t) v_base, SEEK_SET) != (off_t) v_base) {
- fprintf(stderr,"Cannot lseek\n");
- goto Error;
- }
- tmp = (unsigned char *)malloc(3);
- if (read(mem_fd, (char *)tmp, (size_t) 3) != (size_t) 3) {
- fprintf(stderr,"Cannot read\n");
- goto Error;
- }
- if (lseek(mem_fd,(off_t) v_base,SEEK_SET) != (off_t) v_base)
- goto Error;
-
- if (*tmp != 0x55 || *(tmp+1) != 0xAA ) {
- fprintf(stderr,"No bios found at: 0x%lx\n",v_base);
- goto Error;
- }
-#ifdef DEBUG
- dprint((unsigned long)tmp,0x100);
-#endif
- size = *(tmp+2) * 512;
-
- if (read(mem_fd, (char *)v_base, (size_t) size) != (size_t) size) {
- fprintf(stderr,"Cannot read\n");
- goto Error;
- }
- free(tmp);
- close(mem_fd);
- if (!chksum((CARD8*)v_base))
- return (0);
-
- return (1);
-
-Error:
- perror("v_bios");
- close(mem_fd);
- return (0);
-}
-
-static void
-unmap(void)
-{
- munmap(0,SIZE);
-}
-
-static void
-unmap_vram(void)
-{
- if (!vram_mapped) return;
-
- munmap((void*)VRAM_START,VRAM_SIZE);
- vram_mapped = 0;
-}
-
-static void
-runBIOS(int argc, char ** argv)
-{
- i86biosRegs bRegs;
-#ifdef V86BIOS_DEBUG
- printf("starting BIOS\n");
-#endif
- setup_bios_regs(&bRegs, argc, argv);
- do_x86(BIOS_START,&bRegs);
- print_regs(&bRegs);
-#ifdef V86BIOS_DEBUG
- printf("done\n");
-#endif
-}
-
-static CARD32
-setup_int_vect(void)
-{
- int mem_fd;
- CARD32 vbase;
- void *map;
-
- if ((mem_fd = open(MEM_FILE,O_RDONLY))<0) {
- perror("opening memory");
- return (0);
- }
-
- if ((map = mmap((void *) 0, (size_t) 0x2000,
- PROT_EXEC | PROT_READ | PROT_WRITE, MAP_SHARED,
- mem_fd, 0)) == (void *)-1) {
- perror("mmap error in map_hardware_ram");
- close(mem_fd);
- return (0);
- }
-
- close(mem_fd);
- memcpy(0,map,BIOS_MEM);
- munmap(map,0x2000);
- /*
- * create a backup copy of the bios variables to write back the
- * modified values
- */
- bios_var = (char *)malloc(BIOS_MEM);
- memcpy(bios_var,0,BIOS_MEM);
-
- vbase = (*((CARD16*)(0x10 << 2) + 1)) << 4;
- fprintf(stderr,"vbase: 0x%x\n",vbase);
- return vbase;
-}
-
-static void
-update_bios_vars(void)
-{
- int mem_fd;
- void *map;
- memType i;
-
-#ifdef __ia64__
- if ((mem_fd = open(MEM_FILE,O_RDWR | O_SYNC))<0)
-#else
- if ((mem_fd = open(MEM_FILE,O_RDWR))<0)
-#endif
- {
- perror("opening memory");
- return;
- }
-
- if ((map = mmap((void *) 0, (size_t) 0x2000,
- PROT_EXEC | PROT_READ | PROT_WRITE, MAP_SHARED,
- mem_fd, 0)) == (void *)-1) {
- perror("mmap error in map_hardware_ram");
- close(mem_fd);
- return;
- }
-
- for (i = 0; i < BIOS_MEM; i++) {
- if (bios_var[i] != *(CARD8*)i)
- *((CARD8*)map + i) = *(CARD8*)i;
- }
-
- munmap(map,0x2000);
- close(mem_fd);
-}
-
-
-static void
-setup_bios_regs(i86biosRegsPtr regs, int argc, char **argv)
-{
- int c;
-
- regs->ax = 0;
- regs->bx = 0;
- regs->cx = 0;
- regs->dx = 0;
- regs->es = 0;
- regs->di = 0;
- opterr = 0;
- while ((c = getopt(argc,argv,"a:b:c:d:e:i:")) != EOF) {
- switch (c) {
- case 'a':
- regs->ax = strtol(optarg,NULL,0);
- break;
- case 'b':
- regs->bx = strtol(optarg,NULL,0);
- break;
- case 'c':
- regs->cx = strtol(optarg,NULL,0);
- break;
- case 'd':
- regs->dx = strtol(optarg,NULL,0);
- break;
- case 'e':
- regs->es = strtol(optarg,NULL,0);
- break;
- case 'i':
- regs->di = strtol(optarg,NULL,0);
- break;
- }
- }
-}
-
-
-static int
-chksum(CARD8 *start)
-{
- CARD16 size;
- CARD8 val = 0;
- int i;
-
- size = *(start+2) * 512;
- for (i = 0; i<size; i++)
- val += *(start + i);
-
- if (!val)
- return 1;
-
- fprintf(stderr,"BIOS cksum wrong!\n");
- return 0;
-}
-
-static void
-print_regs(i86biosRegsPtr regs)
-{
- printf("ax=%x bx=%x cx=%x dx=%x es=%x di=%x\n",(CARD16)regs->ax,
- (CARD16)regs->bx,(CARD16)regs->cx,(CARD16)regs->dx,
- (CARD16)regs->es,(CARD16)regs->di);
-}
-
-void
-loadCodeToMem(unsigned char *ptr, CARD8 code[])
-{
- int i;
- CARD8 val;
-
- for ( i=0;;i++) {
- val = code[i];
- *ptr++ = val;
- if (val == 0xf4) break;
- }
- return;
-}
-
-void
-dprint(unsigned long start, unsigned long size)
-{
- int i,j;
- char *c = (char *)start;
-
- for (j = 0; j < (size >> 4); j++) {
- printf ("\n0x%lx: ",(unsigned long)c);
- for (i = 0; i<16; i++)
- printf("%x ",(unsigned char) (*(c++)));
- }
- printf("\n");
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/command.c b/board/MAI/bios_emulator/scitech/src/v86bios/command.c
deleted file mode 100644
index e2bce6df1b..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/command.c
+++ /dev/null
@@ -1,38 +0,0 @@
-#include <stdio.h>
-#include <readline/readline.h>
-#include <readline/history.h>
-#include <malloc.h>
-
-#define PROMPT ">"
-
-
-void
-getline(char *buf,int *num,int max_num)
-{
- static int line_len = 0;
- static char *line = NULL;
- static char *line_pointer = NULL;
- static int len = 0;
- int tmp_len;
- char *buff;
-
- if (len <= 0) {
- buff = readline(PROMPT);
- add_history(buff);
-
- if ((tmp_len = strlen(buff)) > line_len) {
- free(line);
- line = malloc(tmp_len);
- line_len = tmp_len;
- }
- sprintf(line,"%s\n",buff);
- free(buff);
- line_pointer = line;
- len = strlen(line);
- }
-
- *num = max_num > len? len : max_num;
- strncpy(buf,line_pointer,*num);
- line_pointer = line_pointer + *num;
- len = len - *num;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/console.c b/board/MAI/bios_emulator/scitech/src/v86bios/console.c
deleted file mode 100644
index 5e9c924b64..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/console.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission. The authors makes no representations
- * about the suitability of this software for any purpose. It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-#include <sys/ioctl.h>
-#include <sys/vt.h>
-#include <sys/kd.h>
-#include <stdio.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include "debug.h"
-#include "v86bios.h"
-
-console
-open_console(void)
-{
- int fd;
- int VTno;
- char VTname[11];
- console Con = {-1,-1};
- struct vt_stat vts;
-
- if (NO_CONSOLE)
- return Con;
-
- if ((fd = open("/dev/tty0",O_WRONLY,0)) < 0)
- return Con;
-
- if ((ioctl(fd, VT_OPENQRY, &VTno) < 0) || (VTno == -1)) {
- fprintf(stderr,"cannot get a vt\n");
- return Con;
- }
-
- close(fd);
- sprintf(VTname,"/dev/tty%i",VTno);
-
- if ((fd = open(VTname, O_RDWR|O_NDELAY, 0)) < 0) {
- fprintf(stderr,"cannot open console\n");
- return Con;
- }
-
- if (ioctl(fd, VT_GETSTATE, &vts) == 0)
- Con.vt = vts.v_active;
-
- if (ioctl(fd, VT_ACTIVATE, VTno) != 0) {
- fprintf(stderr,"cannot activate console\n");
- close(fd);
- return Con;
- }
- if (ioctl(fd, VT_WAITACTIVE, VTno) != 0) {
- fprintf(stderr,"wait for active console failed\n");
- close(fd);
- return Con;
- }
-#if 0
- if (ioctl(fd, KDSETMODE, KD_GRAPHICS) < 0) {
- close(fd);
- return Con;
- }
-#endif
- Con.fd = fd;
- return Con;
-}
-
-void
-close_console(console Con)
-{
- if (Con.fd == -1)
- return;
-
-#if 0
- ioctl(Con.fd, KDSETMODE, KD_TEXT);
-#endif
- if (Con.vt >=0)
- ioctl(Con.fd, VT_ACTIVATE, Con.vt);
-
- close(Con.fd);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/debug.h b/board/MAI/bios_emulator/scitech/src/v86bios/debug.h
deleted file mode 100644
index c5c906b622..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/debug.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission. The authors makes no representations
- * about the suitability of this software for any purpose. It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-/*#define V86BIOS_DEBUG */
-
-/*
- * uncomment the following if needed
- * should be command line options
- */
-
-#define PRINT_PORT 0
-#define IO_STATISTICS 0
-#define PRINT_IRQ 0
-#define PRINT_PCI 1
-#define PRINT_IP 0 /* print IP address with PIO information */
-#define TRACE 0 /* turn on debugger in x86emu */
- /* requires x86emu compiled with -DDEBUG */
-
-/*
- * these should not be here.
- * Should be converted to command line options.
- */
-#define CONFIG_ACTIVE_ONLY 0
-#define CONFIG_ACTIVE_DEVICE 1
-#define SAVE_BIOS 0
-#define MAP_SYS_BIOS 1
-#define RESORT 1
-#define FIX_ROM 0
-#define NO_CONSOLE 0
-#define SHOW_ALL_DEV 0
-#define VERBOSE 0
-
-/*#define V_BIOS 0xe0000 */
-/*#define V_BIOS 0xe4000 */
-
-
-#if (PRINT_IO == 1) && (PRINT_PORT == 0)
-# define PRINT_IO 0
-#endif
-#if (IO_STATISTICS == 1) && (PRINT_PORT == 0)
-# define IO_STATISTICS 0
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/happy_cards b/board/MAI/bios_emulator/scitech/src/v86bios/happy_cards
deleted file mode 100644
index 943d44ede4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/happy_cards
+++ /dev/null
@@ -1,76 +0,0 @@
-What I had to do to make cards happy:
-
-1. Tseng ET4000 W32P
-This card wants to call the original system BIOS video routines.
-It sets the int 0x42 vector to F000:F065, the entry point to the
-system bios video routines.
-CAVE: don't catch int 0x42 and use the vbios int 0x10 routines.
-At early stage during initialization they call int 0x42. This
-causes an infinite loop.
-
-2. ATi Mach64 Rage IIc AGP
-This card does similar things like the Tseng ET4000 W32P.
-However it doesn't have the problem with the ininite loop.
-
-3. Elsa Victory II-A16 AGP Banshee
-This card is very clever: It knows it is an AGP card. Therefore
-it knows it is behind a PCI-PCI bridge. It also knows that noone
-else is behind this bridge. Therefore it start reprogramming the
-bridge! For this it assumes the AGP bridge is on bus 1.
-
-4. Elsa Gloria Synergy 8 ViVo AGP PM2
-This card likes to see a complete interrupt vector table. If
-we fill this table with 0 the VBIOS detects this and quits
-initialization.
-
-5. Dimond Viper 330 AGP NVIDIA Riva 128.
-This card has a similar problem like the Elsa Gloria. It wants
-to read the system BIOS date at 0xffffd.
-
-6. Matrox Mystique PCI
-This card reads the IO port 0x62. If it doesn't like what it sees
-it loops forever. To keep the card happy put 0xfc into 0xffffe.
-This location holds the system model id. 0xfc means IBM-AT.
- One can make an interesting observation: this card likes to know
-with whom it has to share the system. Therefore it accesses PCI
-config space of all the other cards. It does this bypassing the
-PCI BIOS by reading the PCI access ports directly.
-
-7. Matrox G100 AGP
-This card has the same problem as the Mystique.
-
-Apperantly this works now. However not all combinations of cards are
-checked, yet.
-
-Further notes:
-the IO register 0x42-0x43 as well as 0x61-0x63 are of special interest
-for many graphic cards. They should be emulated.
-The so called "Industry Standard BIOS Entry Points" to int 0x42 (0xFF065)
-and to int 0x1a (0xFFE6E) should be filled with useful code. This code
-needs to return as if it was called as int.
-The subvendor ID PCI registers might cause problems. On some chipsets
-they are programmed in a non-obivous non-PCI conformant way.
-V_Bioses are seen to modify the following int:
-0x10 (default video), 0x1f(font table), 0x42(copy of default video),
-0x43 (??), 0x6d (copy of default video - same as 0x10?)
-
-TODO:
-Int 0x6d needs to be done.
-All interrupts where there is no default industry standard entry point
-should point to an unused location in the 0xF000 segmant (possibly
-0xF0000). This way they could be trapped. A trap handler for
-a. int 0x42 and int 0x1a needs to be implemented.
-The default "industry entry point" for video and PCI (0xFFE6E) should
-also be implemented. (any others?) They should either be routed to
-int 0x42(0x6d?) (video) and 0x1A (PCI) or some other interrupts to
-trap them. Mapping of system bios might not be a good idea. Maybe
-the system bios area should just be filled with "hlt" to trap any
-access there.
-Handling of timer IO registers 0x42, 0x43 and IO registers 0x61, 0x62.
-
-Find documentation:
-- on interrupt vector table
-- on industry standard entry points to the system bios
-- on IO registers 0x61 and 0x62
-
-
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/hexdump b/board/MAI/bios_emulator/scitech/src/v86bios/hexdump
deleted file mode 100644
index 4f359e5edd..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/hexdump
+++ /dev/null
@@ -1,3 +0,0 @@
-"%06.6_ax " 16/1 "%02x "
-" " 16/1 "%_p"
-"\n"
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/int.c b/board/MAI/bios_emulator/scitech/src/v86bios/int.c
deleted file mode 100644
index 3504c6cc3c..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/int.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission. The authors makes no representations
- * about the suitability of this software for any purpose. It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-#include "debug.h"
-#if defined(__alpha__) || defined (__ia64__)
-#include <sys/io.h>
-#endif
-
-#include "v86bios.h"
-#include "AsmMacros.h"
-#include "pci.h"
-
-static int int1A_handler(struct regs86 *regs);
-static int int42_handler(int num, struct regs86 *regs);
-
-int
-int_handler(int num, struct regs86 *regs)
-{
- switch (num) {
- case 0x10:
- case 0x42:
- return (int42_handler(num,regs));
- case 0x1A:
- return (int1A_handler(regs));
- default:
- return 0;
- }
- return 0;
-}
-
-static int
-int42_handler(int num,struct regs86 *regs)
-{
- unsigned char c;
- CARD32 val;
-
- i_printf("int 0x%x: ax:0x%lx bx:0x%lx cx:0x%lx dx:0x%lx\n",num,
- regs->eax,regs->ebx, regs->ecx, regs->edx);
-
- /*
- * video bios has modified these -
- * leave it to the video bios to do this
- */
-
- val = getIntVect(num);
- if (val != 0xF000F065)
- return 0;
-
- if ((regs->ebx & 0xff) == 0x32) {
- switch (regs->eax & 0xFFFF) {
- case 0x1200:
- i_printf("enabling video\n");
- c = inb(0x3cc);
- c |= 0x02;
- outb(0x3c2,c);
- return 1;
- case 0x1201:
- i_printf("disabling video\n");
- c = inb(0x3cc);
- c &= ~0x02;
- outb(0x3c2,c);
- return 1;
- default:
- }
- }
- if (num == 0x42)
- return 1;
- else
- return 0;
-}
-
-#define SUCCESSFUL 0x00
-#define DEVICE_NOT_FOUND 0x86
-#define BAD_REGISTER_NUMBER 0x87
-
-static int
-int1A_handler(struct regs86 *regs)
-{
- CARD32 Slot;
- PciStructPtr pPci;
-
- if (! CurrentPci) return 0; /* oops */
-
- i_printf("int 0x1a: ax=0x%lx bx=0x%lx cx=0x%lx dx=0x%lx di=0x%lx"
- " si=0x%lx\n", regs->eax,regs->ebx,regs->ecx,regs->edx,
- regs->edi,regs->esi);
- switch (regs->eax & 0xFFFF) {
- case 0xb101:
- regs->eax &= 0xFF00; /* no config space/special cycle support */
- regs->edx = 0x20494350; /* " ICP" */
- regs->ebx = 0x0210; /* Version 2.10 */
- regs->ecx &= 0xFF00;
- regs->ecx |= (pciMaxBus & 0xFF); /* Max bus number in system */
- regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
- i_printf("ax=0x%lx dx=0x%lx bx=0x%lx cx=0x%lx flags=0x%lx\n",
- regs->eax,regs->edx,regs->ebx,regs->ecx,regs->eflags);
- return 1;
- case 0xb102:
- if (((regs->edx & 0xFFFF) == CurrentPci->VendorID) &&
- ((regs->ecx & 0xFFFF) == CurrentPci->DeviceID) &&
- (regs->esi == 0)) {
- regs->eax = (regs->eax & 0x00FF) | (SUCCESSFUL << 8);
- regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
- regs->ebx = pciSlotBX(CurrentPci);
- }
- else if (Config.ShowAllDev &&
- (pPci = findPciDevice(regs->edx,regs->ecx,regs->esi)) != NULL) {
- regs->eax = (regs->eax & 0x00FF) | (SUCCESSFUL << 8);
- regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
- regs->ebx = pciSlotBX(pPci);
- } else {
- regs->eax = (regs->eax & 0x00FF) | (DEVICE_NOT_FOUND << 8);
- regs->eflags |= ((unsigned long)0x01); /* set carry flag */
- }
- i_printf("ax=0x%lx bx=0x%lx flags=0x%lx\n",
- regs->eax,regs->ebx,regs->eflags);
- return 1;
- case 0xb103:
- if (((regs->ecx & 0xFF) == CurrentPci->Interface) &&
- (((regs->ecx & 0xFF00) >> 8) == CurrentPci->SubClass) &&
- (((regs->ecx & 0xFFFF0000) >> 16) == CurrentPci->BaseClass) &&
- ((regs->esi & 0xff) == 0)) {
- regs->eax = (regs->eax & 0x00FF) | (SUCCESSFUL << 8);
- regs->ebx = pciSlotBX(CurrentPci);
- regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
- }
- else if (Config.ShowAllDev
- && (pPci = findPciClass(regs->ecx & 0xFF, (regs->ecx & 0xff00) >> 8,
- (regs->ecx & 0xffff0000) >> 16, regs->esi)) != NULL) {
- regs->eax = (regs->eax & 0x00FF) | (SUCCESSFUL << 8);
- regs->ebx = pciSlotBX(pPci);
- regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
- } else {
- regs->eax = (regs->eax & 0x00FF) | (DEVICE_NOT_FOUND << 8);
- regs->eflags |= ((unsigned long)0x01); /* set carry flag */
- }
- i_printf("ax=0x%lx flags=0x%lx\n",regs->eax,regs->eflags);
- return 1;
- case 0xb108:
- i_printf("Slot=0x%x\n",CurrentPci->Slot.l);
- if ((Slot = findPci(regs->ebx))) {
- regs->ecx &= 0xFFFFFF00;
- regs->ecx |= PciRead8(regs->edi,Slot);
- regs->eax = (regs->eax & 0x00FF) | (SUCCESSFUL << 8);
- regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
- } else {
- regs->eax = (regs->eax & 0x00FF) | (BAD_REGISTER_NUMBER << 8);
- regs->eflags |= ((unsigned long)0x01); /* set carry flag */
- }
- i_printf("ax=0x%lx cx=0x%lx flags=0x%lx\n",
- regs->eax,regs->ecx,regs->eflags);
- return 1;
- case 0xb109:
- i_printf("Slot=0x%x\n",CurrentPci->Slot.l);
- if ((Slot = findPci(regs->ebx))) {
- regs->ecx &= 0xFFFF0000;
- regs->ecx |= PciRead16(regs->edi,Slot);
- regs->eax = (regs->eax & 0x00FF) | (SUCCESSFUL << 8);
- regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
- } else {
- regs->eax = (regs->eax & 0x00FF) | (BAD_REGISTER_NUMBER << 8);
- regs->eflags |= ((unsigned long)0x01); /* set carry flag */
- }
- i_printf("ax=0x%lx cx=0x%lx flags=0x%lx\n",
- regs->eax,regs->ecx,regs->eflags);
- return 1;
- case 0xb10a:
- i_printf("Slot=0x%x\n",CurrentPci->Slot.l);
- if ((Slot = findPci(regs->ebx))) {
- regs->ecx &= 0;
- regs->ecx |= PciRead32(regs->edi,Slot);
- regs->eax = (regs->eax & 0x00FF) | (SUCCESSFUL << 8);
- regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
- } else {
- regs->eax = (regs->eax & 0x00FF) | (BAD_REGISTER_NUMBER << 8);
- regs->eflags |= ((unsigned long)0x01); /* set carry flag */
- }
- i_printf("ax=0x%lx cx=0x%lx flags=0x%lx\n",
- regs->eax,regs->ecx,regs->eflags);
- return 1;
- case 0xb10b:
- i_printf("Slot=0x%x\n",CurrentPci->Slot.l);
- if ((Slot = findPci(regs->ebx))) {
- PciWrite8(regs->edi,(CARD8)regs->ecx,Slot);
- regs->eax = (regs->eax & 0x00FF) | (SUCCESSFUL << 8);
- regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
- } else {
- regs->eax = (regs->eax & 0x00FF) | (BAD_REGISTER_NUMBER << 8);
- regs->eflags |= ((unsigned long)0x01); /* set carry flag */
- }
- i_printf("ax=0x%lx flags=0x%lx\n", regs->eax,regs->eflags);
- return 1;
- case 0xb10c:
- i_printf("Slot=0x%x\n",CurrentPci->Slot.l);
- if ((Slot = findPci(regs->ebx))) {
- PciWrite16(regs->edi,(CARD16)regs->ecx,Slot);
- regs->eax = (regs->eax & 0x00FF) | (SUCCESSFUL << 8);
- regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
- } else {
- regs->eax = (regs->eax & 0x00FF) | (BAD_REGISTER_NUMBER << 8);
- regs->eflags |= ((unsigned long)0x01); /* set carry flag */
- }
- i_printf("ax=0x%lx flags=0x%lx\n", regs->eax,regs->eflags);
- return 1;
- case 0xb10d:
- i_printf("Slot=0x%x\n",CurrentPci->Slot.l);
- if ((Slot = findPci(regs->ebx))) {
- PciWrite32(regs->edi,(CARD32)regs->ecx,Slot);
- regs->eax = (regs->eax & 0x00FF) | (SUCCESSFUL << 8);
- regs->eflags &= ~((unsigned long)0x01); /* clear carry flag */
- } else {
- regs->eax = (regs->eax & 0x00FF) | (BAD_REGISTER_NUMBER << 8);
- regs->eflags |= ((unsigned long)0x01); /* set carry flag */
- }
- i_printf("ax=0x%lx flags=0x%lx\n", regs->eax,regs->eflags);
- return 1;
- default:
- return 0;
- }
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/io.c b/board/MAI/bios_emulator/scitech/src/v86bios/io.c
deleted file mode 100644
index f35b43e9b9..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/io.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission. The authors makes no representations
- * about the suitability of this software for any purpose. It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-#include "debug.h"
-
-#include <stdio.h>
-#if defined(__alpha__) || defined (__ia64__)
-#include <sys/io.h>
-#endif
-#include "AsmMacros.h"
-#include "v86bios.h"
-#include "pci.h"
-
-int r_inb = 0, r_inw = 0, r_inl = 0, r_outb = 0, r_outw = 0, r_outl = 0;
-int in_b = 0, in_w = 0, in_l = 0, out_b = 0, out_w = 0, out_l = 0;
-
-
-int
-port_rep_inb(CARD16 port, CARD8 *base, int d_f, CARD32 count)
-{
- register int inc = d_f ? -1 : 1;
- CARD8 *dst = base;
-
- p_printf(" rep_insb(%#x) %d bytes at %p %s",
- port, count, base, d_f?"up":"down");
- if (Config.PrintIp)
- p_printf(" %x\n",getIP());
- else p_printf("\n");
-
- r_inb++;
- while (count--) {
- *dst = inb(port);
- dst += inc;
- }
- return (dst-base);
-}
-
-int
-port_rep_inw(CARD16 port, CARD16 *base, int d_f, CARD32 count)
-{
- register int inc = d_f ? -1 : 1;
- CARD16 *dst = base;
-
- p_printf(" rep_insw(%#x) %d bytes at %p %s",
- port, count, base, d_f?"up":"down");
- if (Config.PrintIp)
- p_printf(" %x\n",getIP());
- else p_printf("\n");
-
- r_inw++;
- while (count--) {
- *dst = inw(port);
- dst += inc;
- }
- return (dst-base);
-}
-
-int
-port_rep_inl(CARD16 port, CARD32 *base, int d_f, CARD32 count)
-{
- register int inc = d_f ? -1 : 1;
- CARD32 *dst = base;
-
- p_printf(" rep_insl(%#x) %d bytes at %p %s",
- port, count, base, d_f?"up":"down");
- if (Config.PrintIp)
- p_printf(" %x\n",getIP());
- else p_printf("\n");
-
- r_inl++;
- while (count--) {
- *dst = inl(port);
- dst += inc;
- }
- return (dst-base);
-}
-
-int
-port_rep_outb(CARD16 port, CARD8 *base, int d_f, CARD32 count)
-{
- register int inc = d_f ? -1 : 1;
- CARD8 *dst = base;
-
- p_printf(" rep_outb(%#x) %d bytes at %p %s",
- port, count, base, d_f?"up":"down");
- if (Config.PrintIp)
- p_printf(" %x\n",getIP());
- else p_printf("\n");
-
- r_outb++;
- while (count--) {
- outb(port,*dst);
- dst += inc;
- }
- return (dst-base);
-}
-
-int
-port_rep_outw(CARD16 port, CARD16 *base, int d_f, CARD32 count)
-{
- register int inc = d_f ? -1 : 1;
- CARD16 *dst = base;
-
- p_printf(" rep_outw(%#x) %d bytes at %p %s",
- port, count, base, d_f?"up":"down");
- if (Config.PrintIp)
- p_printf(" %x\n",getIP());
- else p_printf("\n");
-
- r_outw++;
- while (count--) {
- outw(port,*dst);
- dst += inc;
- }
- return (dst-base);
-}
-
-int
-port_rep_outl(CARD16 port, CARD32 *base, int d_f, CARD32 count)
-{
- register int inc = d_f ? -1 : 1;
- CARD32 *dst = base;
-
- p_printf(" rep_outl(%#x) %d bytes at %p %s",
- port, count, base, d_f?"up":"down");
- if (Config.PrintIp)
- p_printf(" %x\n",getIP());
- else p_printf("\n");
-
- r_outl++;
- while (count--) {
- outl(port,*dst);
- dst += inc;
- }
- return (dst-base);
-}
-
-CARD8
-p_inb(CARD16 port)
-{
- CARD8 val = 0;
- in_b++;
- val = inb(port);
- p_printf(" inb(%#x) = %2.2x",port,val);
- if (Config.PrintIp)
- p_printf(" %x\n",getIP());
- else p_printf("\n");
-
- return val;
-}
-
-CARD16
-p_inw(CARD16 port)
-{
- CARD16 val = 0;
- in_w++;
- val = inw(port);
- p_printf(" inw(%#x) = %4.4x",port,val);
- if (Config.PrintIp)
- p_printf(" %x\n",getIP());
- else p_printf("\n");
-
- return val;
-}
-
-CARD32
-p_inl(CARD16 port)
-{
- CARD32 val = 0;
- in_l++;
-#ifdef NEED_PCI_IO
- if (cfg1in(port,&val))
- return val;
- else
-#endif
- val = inl(port);
- p_printf(" inl(%#x) = %8.8x",port,val);
- if (Config.PrintIp)
- p_printf(" %x\n",getIP());
- else p_printf("\n");
-
- return val;
-}
-
-void
-p_outb(CARD16 port, CARD8 val)
-{
- out_b++;
- p_printf(" outb(%#x, %2.2x)",port,val);
- if (Config.PrintIp)
- p_printf(" %x\n",getIP());
- else p_printf("\n");
-
- outb(port,val);
-}
-
-void
-p_outw(CARD16 port, CARD16 val)
-{
- out_w++;
- p_printf(" outw(%#x, %4.4x)",port,val);
- if (Config.PrintIp)
- p_printf(" %x\n",getIP());
- else p_printf("\n");
-
- outw(port,val);
-}
-
-void
-p_outl(CARD16 port, CARD32 val)
-{
- out_l++;
- p_printf(" outl(%#x, %8.8x)",port,val);
- if (Config.PrintIp)
- p_printf(" %x\n",getIP());
- else p_printf("\n");
-
-#ifdef NEED_PCI_IO
- if (cfg1out(port,val))
- return;
-#endif
- outl(port,val);
-}
-
-void
-io_statistics(void)
-{
- p_printf("rep: inb: %i, inw: %i, inl: %i, outb: %i, outw: %i, outl: %i\n",
- r_inb,r_inw,r_inl,r_outb,r_outw,r_outl);
- p_printf("inb: %i, inw: %i, inl: %i, outb: %i, outw: %i, outl: %i\n",
- in_b,in_w,in_l,out_b,out_w,out_l);
-}
-
-void
-clear_stat(void)
-{
- r_inb = r_inw = r_inl = r_outb = r_outw = r_outl = 0;
- in_b = in_w = in_l = out_b = out_w = out_l = 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/lex.l b/board/MAI/bios_emulator/scitech/src/v86bios/lex.l
deleted file mode 100644
index 3a3391c7b4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/lex.l
+++ /dev/null
@@ -1,79 +0,0 @@
-%{
-#include "parser.h"
-
-#include <string.h>
-#include <stdio.h>
-
- void getline(char *buf,int *num,int max_num);
-
-#define YY_INPUT(buf,result,max_size) {\
- getline(buf,&result,max_size);\
- }
-
- void
- yyerror (char *s)
- {
- printf ("%s\n", s);
- }
-
-%}
-
-DIGIT [0-9a-fA-F]
-
-%%
-
-"0x"?{DIGIT}+ { yylval = strtol(yytext,NULL,0); return TOK_NUM; }
-"ax" { return TOK_REG_AX; }
-"bx" { return TOK_REG_BX; }
-"cx" { return TOK_REG_CX; }
-"dx" { return TOK_REG_DX; }
-"di" { return TOK_REG_SI; }
-"si" { return TOK_REG_DI; }
-"ds" { return TOK_SEG_DS; }
-"es" { return TOK_SEG_ES; }
-":" { return TOK_SEP;}
-"$"{DIGIT}{1,2} { yylval = strtol(yytext+1,NULL,0); return TOK_VAR; }
-"$mem" { return TOK_VAR_MEM; }
-[ \t]+
-"#".*[\n] { return TOK_END; }
-"boot" { return TOK_COMMAND_BOOT; }
-"do" { return TOK_COMMAND_EXEC; }
-"\"".*"\"" { yylval = (unsigned long) yytext; return TOK_STRING; }
-"byte" { return TOK_BYTE; }
-"word" { return TOK_WORD; }
-"long" { return TOK_LONG; }
-"setmem" { return TOK_COMMAND_MEMSET; }
-"dumpmem" { return TOK_COMMAND_MEMDUMP; }
-"quit" { return TOK_COMMAND_QUIT; }
-"\n" { return TOK_END; }
-"select" { return TOK_SELECT; }
-"isa" { return TOK_ISA; }
-"pci" { return TOK_PCI; }
-"pport" { return TOK_PRINT_PORT; }
-"iostat" { return TOK_IOSTAT; }
-"pirq" { return TOK_PRINT_IRQ; }
-"ppci" { return TOK_PPCI; }
-"pip" { return TOK_PIP; }
-"trace" { return TOK_TRACE; }
-"on" { return TOK_ON; }
-"off" { return TOK_OFF; }
-"verbose" { return TOK_VERBOSE; }
-"log" { return TOK_LOG; }
-"print" { return TOK_STDOUT; }
-"clstat" { return TOK_CLSTAT; }
-"hlt" { return TOK_HLT; }
-"del" { return TOK_DEL; }
-"ioperm" { return TOK_IOPERM; }
-"lpci" { return TOK_DUMP_PCI; }
-"bootbios" { return TOK_BOOT_BIOS; }
-"?" { return '?'; }
-. { return TOK_ERROR; }
-
-%%
-
-
-
-
-
-
-
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/main.c b/board/MAI/bios_emulator/scitech/src/v86bios/main.c
deleted file mode 100644
index 15f91150f8..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/main.c
+++ /dev/null
@@ -1,616 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission. The authors makes no representations
- * about the suitability of this software for any purpose. It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-#define DELETE
-#include <unistd.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <sys/mman.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-#include <signal.h>
-#include <sys/stat.h>
-#if defined(__alpha__) || defined (__ia64__)
-#include <sys/io.h>
-#elif defined(HAVE_SYS_PERM)
-#include <sys/perm.h>
-#endif
-#include "debug.h"
-#include "v86bios.h"
-#include "pci.h"
-#include "AsmMacros.h"
-
-#define SIZE 0x100000
-#define VRAM_START 0xA0000
-#define VRAM_SIZE 0x1FFFF
-#define V_BIOS_SIZE 0x1FFFF
-#define BIOS_START 0x7C00 /* default BIOS entry */
-
-/*CARD8 code[] = { 0xb8 , 0xf0 , 0xf0, 0xf4 }; */
-#define VB_X(x) (V_BIOS >> x) & 0xFF
-CARD8 code[] = { 0x9a, 0x03, 0x00, 0x00, VB_X(12), 0xf4 };
-/*CARD8 code[] = { 0x9a, 0x03, 0x00, 0x00, VB_X(12), 0xb8, 0x03, 0x00, */
-/*0xcd, 0x10, 0xf4 }; */
-/*CARD8 code[] = { 0xb8 , 0xf0 , 0xf0 ,0xf4 }; */
-
-static void sig_handler(int);
-static int map(void);
-static void unmap(void);
-static void bootBIOS(CARD16 ax);
-static int map_vram(void);
-static void unmap_vram(void);
-static int copy_vbios(void);
-static int copy_sys_bios(void);
-static void save_bios_to_file(void);
-static int setup_system_bios(void);
-static void setup_int_vect(void);
-static int chksum(CARD8 *start);
-static void setup_bios_regs(i86biosRegsPtr regs, CARD32 ax);
-
-void loadCodeToMem(unsigned char *ptr, CARD8 *code);
-void dprint(unsigned long start, unsigned long size);
-
-static int vram_mapped = 0;
-static CARD8 save_msr;
-static CARD8 save_pos102;
-static CARD8 save_vse;
-static CARD8 save_46e8;
-console Console;
-struct config Config;
-
-
-int
-main(void)
-{
- int Active_is_Pci = 0;
-#ifdef DELETE
- Config.PrintPort = PRINT_PORT;
- Config.IoStatistics = IO_STATISTICS;
- Config.PrintIrq = PRINT_IRQ;
- Config.PrintPci = PRINT_PCI;
- Config.ShowAllDev = SHOW_ALL_DEV;
- Config.PrintIp = PRINT_IP;
- Config.SaveBios = SAVE_BIOS;
- Config.Trace = TRACE;
- Config.ConfigActiveOnly = CONFIG_ACTIVE_ONLY;
- Config.ConfigActiveDevice = CONFIG_ACTIVE_DEVICE;
- Config.MapSysBios = MAP_SYS_BIOS;
- Config.Resort = RESORT;
- Config.FixRom = FIX_ROM;
- Config.NoConsole = NO_CONSOLE;
- Config.Verbose = VERBOSE;
-
- if (!map())
- exit(1);
-
- if (!setup_system_bios())
- exit(1);
-
- iopl(3);
- setup_io();
-
- scan_pci();
- if (!CurrentPci && !Config.ConfigActiveDevice && !Config.ConfigActiveOnly)
- exit (1);
-#endif
- Console = open_console();
-
- if (Config.ConfigActiveOnly) {
- CARD16 ax;
- int activePci = 0;
- int error = 0;
-
- while (CurrentPci) {
- if (CurrentPci->active) {
- activePci = 1;
- if (!(mapPciRom(NULL) && chksum((CARD8*)V_BIOS)))
- error = 1;
- break;
- }
- CurrentPci = CurrentPci->next;
- }
- ax = ((CARD16)(CurrentPci->bus) << 8)
- | (CurrentPci->dev << 3) | (CurrentPci->func & 0x7);
- P_printf("ax: 0x%x\n",ax);
- setup_int_vect();
- if (!error && (activePci || copy_vbios())) {
-
- if (Config.SaveBios) save_bios_to_file();
- if (map_vram()) {
- printf("initializing ISA\n");
- bootBIOS(0);
- }
- }
- unmap_vram();
- sleep(1);
- } else {
- /* disable primary card */
- save_msr = inb(0x3CC);
- save_vse = inb(0x3C3);
- save_46e8 = inb(0x46e8);
- save_pos102 = inb(0x102);
-
- signal(2,sig_handler);
- signal(11,sig_handler);
-
- outb(0x3C2,~(CARD8)0x03 & save_msr);
- outb(0x3C3,~(CARD8)0x01 & save_vse);
- outb(0x46e8, ~(CARD8)0x08 & save_46e8);
- outb(0x102, ~(CARD8)0x01 & save_pos102);
-
- pciVideoDisable();
-
- while (CurrentPci) {
- CARD16 ax;
-
- if (CurrentPci->active) {
- Active_is_Pci = 1;
- if (!Config.ConfigActiveDevice) {
- CurrentPci = CurrentPci->next;
- continue;
- }
- }
-
- EnableCurrent();
-
- if (CurrentPci->active) {
- outb(0x102, save_pos102);
- outb(0x46e8, save_46e8);
- outb(0x3C3, save_vse);
- outb(0x3C2, save_msr);
- }
-
- /* clear interrupt vectors */
- setup_int_vect();
-
- ax = ((CARD16)(CurrentPci->bus) << 8)
- | (CurrentPci->dev << 3) | (CurrentPci->func & 0x7);
- P_printf("ax: 0x%x\n",ax);
-
- if (!((mapPciRom(NULL) && chksum((CARD8*)V_BIOS))
- || (CurrentPci->active && copy_vbios()))) {
- CurrentPci = CurrentPci->next;
- continue;
- }
- if (!map_vram()) {
- CurrentPci = CurrentPci->next;
- continue;
- }
- if (Config.SaveBios) save_bios_to_file();
- printf("initializing PCI bus: %i dev: %i func: %i\n",CurrentPci->bus,
- CurrentPci->dev,CurrentPci->func);
- bootBIOS(ax);
- unmap_vram();
-
- CurrentPci = CurrentPci->next;
- }
-
- /* We have an ISA device - configure if requested */
- if (!Active_is_Pci && Config.ConfigActiveDevice) {
- pciVideoDisable();
-
- outb(0x102, save_pos102);
- outb(0x46e8, save_46e8);
- outb(0x3C3, save_vse);
- outb(0x3C2, save_msr);
-
- setup_int_vect();
- if (copy_vbios()) {
-
- if (Config.SaveBios) save_bios_to_file();
- if (map_vram()) {
- printf("initializing ISA\n");
- bootBIOS(0);
- }
- }
-
- unmap_vram();
- sleep(1);
- }
-
- pciVideoRestore();
-
- outb(0x102, save_pos102);
- outb(0x46e8, save_46e8);
- outb(0x3C3, save_vse);
- outb(0x3C2, save_msr);
- }
-
- close_console(Console);
-#ifdef DELETE
- iopl(0);
- unmap();
-
- printf("done !\n");
-#endif
- if (Config.IoStatistics)
- io_statistics();
-#ifdef DELETE
- exit(0);
-#endif
-}
-
-int
-map(void)
-{
- void* mem;
-
- mem = mmap(0, (size_t)SIZE,
- PROT_EXEC | PROT_READ | PROT_WRITE,
- MAP_FIXED | MAP_PRIVATE | MAP_ANON,
- -1, 0 );
- if (mem != 0) {
- perror("anonymous map");
- return (0);
- }
- memset(mem,0,SIZE);
-
- loadCodeToMem((unsigned char *) BIOS_START, code);
- return (1);
-}
-
-static void
-unmap(void)
-{
- munmap(0,SIZE);
-}
-
-static void
-bootBIOS(CARD16 ax)
-{
- i86biosRegs bRegs;
-#ifdef V86BIOS_DEBUG
- printf("starting BIOS\n");
-#endif
- setup_bios_regs(&bRegs, ax);
- do_x86(BIOS_START,&bRegs);
-#ifdef V86BIOS_DEBUG
- printf("done\n");
-#endif
-}
-
-static int
-map_vram(void)
-{
- int mem_fd;
-
-#ifdef __ia64__
- if ((mem_fd = open(MEM_FILE,O_RDWR | O_SYNC))<0)
-#else
- if ((mem_fd = open(MEM_FILE,O_RDWR))<0)
-#endif
- {
- perror("opening memory");
- return 0;
- }
-
-#ifndef __alpha__
- if (mmap((void *) VRAM_START, (size_t) VRAM_SIZE,
- PROT_EXEC | PROT_READ | PROT_WRITE, MAP_SHARED | MAP_FIXED,
- mem_fd, VRAM_START) == (void *) -1)
-#else
- if (!_bus_base()) sparse_shift = 7; /* Uh, oh, JENSEN... */
- if (!_bus_base_sparse()) sparse_shift = 0;
- if ((vram_map = mmap(0,(size_t) (VRAM_SIZE << sparse_shift),
- PROT_READ | PROT_WRITE,
- MAP_SHARED,
- mem_fd, (VRAM_START << sparse_shift)
- | _bus_base_sparse())) == (void *) -1)
-#endif
- {
- perror("mmap error in map_hardware_ram");
- close(mem_fd);
- return (0);
- }
- vram_mapped = 1;
- close(mem_fd);
- return (1);
-}
-
-static void
-unmap_vram(void)
-{
- if (!vram_mapped) return;
-
- munmap((void*)VRAM_START,VRAM_SIZE);
- vram_mapped = 0;
-}
-
-static int
-copy_vbios(void)
-{
- int mem_fd;
- unsigned char *tmp;
- int size;
-
- if ((mem_fd = open(MEM_FILE,O_RDONLY))<0) {
- perror("opening memory");
- return (0);
- }
-
- if (lseek(mem_fd,(off_t) V_BIOS, SEEK_SET) != (off_t) V_BIOS) {
- fprintf(stderr,"Cannot lseek\n");
- goto Error;
- }
- tmp = (unsigned char *)malloc(3);
- if (read(mem_fd, (char *)tmp, (size_t) 3) != (size_t) 3) {
- fprintf(stderr,"Cannot read\n");
- goto Error;
- }
- if (lseek(mem_fd,(off_t) V_BIOS,SEEK_SET) != (off_t) V_BIOS)
- goto Error;
-
- if (*tmp != 0x55 || *(tmp+1) != 0xAA ) {
-#ifdef DEBUG
- dprint((unsigned long)tmp,0x100);
-#endif
- fprintf(stderr,"No bios found at: 0x%x\n",V_BIOS);
- goto Error;
- }
- size = *(tmp+2) * 512;
-
- if (read(mem_fd, (char *)V_BIOS, (size_t) size) != (size_t) size) {
- fprintf(stderr,"Cannot read\n");
- goto Error;
- }
- free(tmp);
- close(mem_fd);
- if (!chksum((CARD8)V_BIOS))
- return (0);
-
- return (1);
-
-Error:
- perror("v_bios");
- close(mem_fd);
- return (0);
-}
-
-static int
-copy_sys_bios(void)
-{
-#define SYS_BIOS 0xF0000
- int mem_fd;
-
- if ((mem_fd = open(MEM_FILE,O_RDONLY))<0) {
- perror("opening memory");
- return (0);
- }
-
- if (lseek(mem_fd,(off_t) SYS_BIOS,SEEK_SET) != (off_t) SYS_BIOS)
- goto Error;
- if (read(mem_fd, (char *)SYS_BIOS, (size_t) 0xFFFF) != (size_t) 0xFFFF)
- goto Error;
-
- close(mem_fd);
- return (1);
-
-Error:
- perror("sys_bios");
- close(mem_fd);
- return (0);
-}
-
-void
-loadCodeToMem(unsigned char *ptr, CARD8 code[])
-{
- int i;
- CARD8 val;
-
- for ( i=0;;i++) {
- val = code[i];
- *ptr++ = val;
- if (val == 0xf4) break;
- }
- return;
-}
-
-void
-dprint(unsigned long start, unsigned long size)
-{
- int i,j;
- char *c = (char *)start;
-
- for (j = 0; j < (size >> 4); j++) {
- char *d = c;
- printf("\n0x%lx: ",(unsigned long)c);
- for (i = 0; i<16; i++)
- printf("%2.2x ",(unsigned char) (*(c++)));
- c = d;
- for (i = 0; i<16; i++) {
- printf("%c",((((CARD8)(*c)) > 32) && (((CARD8)(*c)) < 128)) ?
- (unsigned char) (*(c)): '.');
- c++;
- }
- }
- printf("\n");
-}
-
-static void
-save_bios_to_file(void)
-{
- static int num = 0;
- int size, count;
- char file_name[256];
- int fd;
-
- sprintf(file_name,"bios_%i.fil",num);
- if ((fd = open(file_name,O_WRONLY | O_CREAT | O_TRUNC,00644)) == -1)
- return;
- size = (*(unsigned char*)(V_BIOS + 2)) * 512;
-#ifdef V86BIOS_DEBUG
- dprint(V_BIOS,20);
-#endif
- if ((count = write(fd,(void *)(V_BIOS),size)) != size)
- fprintf(stderr,"only saved %i of %i bytes\n",size,count);
- num++;
-}
-
-static void
-sig_handler(int unused)
-{
- fflush(stdout);
- fflush(stderr);
-
- /* put system back in a save state */
- unmap_vram();
- pciVideoRestore();
- outb(0x102, save_pos102);
- outb(0x46e8, save_46e8);
- outb(0x3C3, save_vse);
- outb(0x3C2, save_msr);
-
- close_console(Console);
- iopl(0);
- unmap();
-
- exit(1);
-}
-
-/*
- * For initialization we just pass ax to the BIOS.
- * PCI BIOSes need this. All other register are set 0.
- */
-static void setup_bios_regs(i86biosRegsPtr regs, CARD32 ax)
-{
- regs->ax = ax;
- regs->bx = 0;
- regs->cx = 0;
- regs->dx = 0;
- regs->es = 0;
- regs->di = 0;
-}
-
-/*
- * here we are really paranoid about faking a "real"
- * BIOS. Most of this information was pulled from
- * dosem.
- */
-static void
-setup_int_vect(void)
-{
- const CARD16 cs = 0x0000;
- const CARD16 ip = 0x0;
- int i;
-
- /* let the int vects point to the SYS_BIOS seg */
- for (i=0; i<0x80; i++) {
- ((CARD16*)0)[i<<1] = ip;
- ((CARD16*)0)[(i<<1)+1] = cs;
- }
- /* video interrupts default location */
- ((CARD16*)0)[(0x42<<1)+1] = 0xf000;
- ((CARD16*)0)[0x42<<1] = 0xf065;
- ((CARD16*)0)[(0x10<<1)+1] = 0xf000;
- ((CARD16*)0)[0x10<<1] = 0xf065;
- /* video param table default location (int 1d) */
- ((CARD16*)0)[(0x1d<<1)+1] = 0xf000;
- ((CARD16*)0)[0x1d<<1] = 0xf0A4;
- /* font tables default location (int 1F) */
- ((CARD16*)0)[(0x1f<<1)+1] = 0xf000;
- ((CARD16*)0)[0x1f<<1] = 0xfa6e;
-
- /* int 11 default location */
- ((CARD16*)0)[(0x11<1)+1] = 0xf000;
- ((CARD16*)0)[0x11<<1] = 0xf84d;
- /* int 12 default location */
- ((CARD16*)0)[(0x12<<1)+1] = 0xf000;
- ((CARD16*)0)[0x12<<1] = 0xf841;
- /* int 15 default location */
- ((CARD16*)0)[(0x15<<1)+1] = 0xf000;
- ((CARD16*)0)[0x15<<1] = 0xf859;
- /* int 1A default location */
- ((CARD16*)0)[(0x1a<<1)+1] = 0xf000;
- ((CARD16*)0)[0x1a<<1] = 0xff6e;
- /* int 05 default location */
- ((CARD16*)0)[(0x05<<1)+1] = 0xf000;
- ((CARD16*)0)[0x05<<1] = 0xff54;
- /* int 08 default location */
- ((CARD16*)0)[(0x8<<1)+1] = 0xf000;
- ((CARD16*)0)[0x8<<1] = 0xfea5;
- /* int 13 default location (fdd) */
- ((CARD16*)0)[(0x13<<1)+1] = 0xf000;
- ((CARD16*)0)[0x13<<1] = 0xec59;
- /* int 0E default location */
- ((CARD16*)0)[(0xe<<1)+1] = 0xf000;
- ((CARD16*)0)[0xe<<1] = 0xef57;
- /* int 17 default location */
- ((CARD16*)0)[(0x17<<1)+1] = 0xf000;
- ((CARD16*)0)[0x17<<1] = 0xefd2;
- /* fdd table default location (int 1e) */
- ((CARD16*)0)[(0x1e<<1)+1] = 0xf000;
- ((CARD16*)0)[0x1e<<1] = 0xefc7;
-}
-
-static int
-setup_system_bios(void)
-{
- char *date = "06/01/99";
- char *eisa_ident = "PCI/ISA";
-
-#if MAP_SYS_BIOS
- if (!copy_sys_bios()) return 0;
- return 1;
-#endif
-/* memset((void *)0xF0000,0xf4,0xfff7); */
-
- /*
- * we trap the "industry standard entry points" to the BIOS
- * and all other locations by filling them with "hlt"
- * TODO: implement hlt-handler for these
- */
- memset((void *)0xF0000,0xf4,0x10000);
-
- /*
- * TODO: we should copy the fdd table (0xfec59-0xfec5b)
- * the video parameter table (0xf0ac-0xf0fb)
- * and the font tables (0xfa6e-0xfe6d)
- * from the original bios here
- */
-
- /* set bios date */
- strcpy((char *)0xFFFF5,date);
- /* set up eisa ident string */
- strcpy((char *)0xFFFD9,eisa_ident);
- /* write system model id for IBM-AT */
- ((char *)0)[0xFFFFE] = 0xfc;
-
- return 1;
-}
-
-static int
-chksum(CARD8 *start)
-{
- CARD16 size;
- CARD8 val = 0;
- int i;
-
- size = *(start+2) * 512;
- for (i = 0; i<size; i++)
- val += *(start + i);
-
- if (!val)
- return 1;
-
- fprintf(stderr,"BIOS cksum wrong!\n");
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/makefile.linux b/board/MAI/bios_emulator/scitech/src/v86bios/makefile.linux
deleted file mode 100644
index 5dfe306991..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/makefile.linux
+++ /dev/null
@@ -1,59 +0,0 @@
-CFLAGS=-g -I/usr/include -I../../include/ -O0 -Wall
-CC=gcc
-
-.y.c:
- bison -d -o $@ $<
-.l.c:
- flex -o$@ $<
-
-SRCS = main.c io.c x86emu.c int.c pci.c
-OBJS = main.o io.o x86emu.o int.o pci.o
-
-all : vbios.vm86 v86bios.vm86 cbios.vm86 cbios.x86emu vbios.x86emu v86bios.x86emu
-#all : cbios.x86emu vbios.x86emu v86bios.x86emu
-
-parser.c : parser.y
-lex.c : lex.l
-cbios.o : cbios.c v86bios.h debug.h
-main.o : main.c v86bios.h pci.h debug.h
-io.o : v86bios.h AsmMacros.h debug.h
-mem.o : mem.c debug.h v86bios.h
-int.o : int.c v86bios.h debug.h
-pci.o : pci.c pci.h debug.h
-console.o : console.c v86bios.h debug.h
-v86.o : v86.c debug.h
-parser.o : parser.c
-lex.o : lex.c
-v86bios.o: v86bios.c v86bios.h pci.h debug.h
-logging.o: logging.c v86bios.h
-x86emu.o : x86emu.c v86bios.h debug.h
- $(CC) -c -DX86EMU $(CFLAGS) $*.c
-
-vbios.x86emu : main.o x86emu.o io.o int.o pci.o console.o mem.o logging.o
- gcc -Wl,-defsym -Wl,printk=lprintf -o vbios.x86emu main.o \
- x86emu.o io.o int.o pci.o console.o mem.o logging.o \
- -L../x86emu -lx86emud -lc
-vbios.vm86 : main.o v86.o io.o int.o pci.o console.o logging.o
- gcc -o vbios.vm86 main.o v86.o io.o int.o pci.o console.o \
- logging.o -lc
-cbios.x86emu : cbios.o x86emu.o io.o int.o pci.o console.o mem.o logging.o
- gcc -Wl,-defsym -Wl,printk=lprintf -o cbios.x86emu cbios.o \
- x86emu.o io.o int.o pci.o console.o mem.o logging.o \
- -L../x86emu -lx86emud -lc
-cbios.vm86 : cbios.o v86.o io.o int.o pci.o console.o logging.o
- gcc -o cbios.vm86 cbios.o v86.o io.o int.o pci.o console.o \
- logging.o -lc
-v86bios.vm86: command.o parser.o lex.o v86bios.o v86.o io.o int.o pci.o console.o logging.o
- gcc -o v86bios.vm86 command.o parser.o lex.o v86bios.o v86.o io.o \
- int.o pci.o console.o logging.o -L/usr/lib/curses -lfl \
- -lreadline -lc -lncurses /usr/lib/libc.a
-v86bios.x86emu: command.o parser.o lex.o v86bios.o x86emu.o io.o int.o pci.o console.o logging.o
- gcc -Wl,-defsym -Wl,printk=lprintf -o v86bios.x86emu \
- command.o parser.o lex.o v86bios.o x86emu.o io.o \
- int.o pci.o console.o logging.o -L/usr/lib/curses -lfl \
- -lreadline -lc -lncurses /usr/lib/libc.a -L../x86emu -lx86emud
-
-clean:
- rm -f *.o vbios.x86emu vbios.vm86 cbios.x86emu cbios.vm86 parser.c \
- lex.c parser.h v86bios.x86emu v86bios.vm86
-
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/mem.c b/board/MAI/bios_emulator/scitech/src/v86bios/mem.c
deleted file mode 100644
index 24c1aef8e5..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/mem.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission. The authors makes no representations
- * about the suitability of this software for any purpose. It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-#include "debug.h"
-#include "v86bios.h"
-#include "x86emu.h"
-
-#ifdef __alpha__
-
-void* vram_map = 0;
-int sparse_shift = 5;
-
-#define mem_barrier() __asm__ __volatile__("mb" : : : "memory")
-
-#define vuip volatile unsigned int *
-
-CARD8
-mem_rb(CARD32 addr)
-{
- unsigned long result, shift;
-#if 1
- if (addr >= 0xA0000 && addr <= 0xBFFFF) {
- addr -= 0xA0000;
- shift = (addr & 0x3) * 8;
- result = *(vuip) ((unsigned long)vram_map + (addr << sparse_shift));
- result >>= shift;
- return 0xffUL & result;
- } else
-#endif
- return rdb(addr);
-}
-
-CARD16
-mem_rw(CARD32 addr)
-{
- unsigned long result, shift;
-#if 1
- if (addr >= 0xA0000 && addr <= 0xBFFFF) {
- addr -= 0xA0000;
- shift = (addr & 0x2) * 8;
- result = *(vuip)((unsigned long)vram_map+(addr<<sparse_shift)
- +(1<<(sparse_shift-2)));
- result >>= shift;
- return 0xffffUL & result;
- } else
-#endif
- return rdw(addr);
-}
-
-CARD32
-mem_rl(CARD32 addr)
-{
- unsigned long result;
-#if 1
- if (addr >= 0xA0000 && addr <= 0xBFFFF) {
- addr -= 0xA0000;
- result = *(vuip)((unsigned long)vram_map+(addr<<sparse_shift)+(3<<(sparse_shift-2)));
- return result;
- } else
-#endif
- return rdl(addr);
-}
-
-void
-mem_wb(CARD32 addr, CARD8 val)
-{
- unsigned int b = val & 0xffU;
-#if 1
- if (addr >= 0xA0000 && addr <= 0xBFFFF) {
- addr -= 0xA0000;
- *(vuip) ((unsigned long)vram_map + (addr << sparse_shift)) = b * 0x01010101;
- mem_barrier();
- } else
-#endif
- wrb(addr,val);
-}
-
-void
-mem_ww(CARD32 addr, CARD16 val)
-{
- unsigned int w = val & 0xffffU;
-#if 1
- if (addr >= 0xA0000 && addr <= 0xBFFFF) {
- addr -= 0xA0000;
- *(vuip)((unsigned long)vram_map+(addr<<sparse_shift)
- +(1<<(sparse_shift-2))) = w * 0x00010001;
- mem_barrier();
- } else
-#endif
- wrw(addr,val);
-}
-
-void
-mem_wl(CARD32 addr, CARD32 val)
-{
-#if 1
- if (addr >= 0xA0000 && addr <= 0xBFFFF) {
- addr -= 0xA0000;
- *(vuip)((unsigned long)vram_map+(addr<<sparse_shift)
- +(3<<(sparse_shift-2))) = val;
- mem_barrier();
- } else
-#endif
- wrl(addr,val);
-}
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/parser.y b/board/MAI/bios_emulator/scitech/src/v86bios/parser.y
deleted file mode 100644
index 21c4023dcd..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/parser.y
+++ /dev/null
@@ -1,498 +0,0 @@
-%{
-#include <malloc.h>
-#include <string.h>
-#include "v86bios.h"
-#include "pci.h"
-
-#define YYSTYPE unsigned long
-
-#define MAX_VAR 0x20
-
- CARD32 var[MAX_VAR];
- CARD32 var_mem;
-
-
-i86biosRegs regs = { 00 };
-
-enum mem_type { BYTE, WORD, LONG, STRING };
-union mem_val {
- CARD32 integer;
- char *ptr;
-} rec;
-
-struct mem {
- enum mem_type type;
- union mem_val val;
- struct mem *next;
-};
-
-
-struct device Device = {FALSE,NONE,{0}};
-
-extern void yyerror(char *s);
-extern int yylex( void );
-
-static void boot(void);
-static void dump_mem(CARD32 addr, int len);
-static void exec_int(int num);
-static void *add_to_list(enum mem_type type, union mem_val *rec, void *next);
-static void do_list(struct mem *list, memType addr);
-static char * normalize_string(char *ptr);
-%}
-
-%token TOK_NUM
-%token TOK_REG_AX
-%token TOK_REG_BX
-%token TOK_REG_CX
-%token TOK_REG_DX
-%token TOK_REG_DI
-%token TOK_REG_SI
-%token TOK_SEG_DS
-%token TOK_SEG_ES
-%token TOK_SEP
-%token TOK_VAR
-%token TOK_VAR_MEM
-%token TOK_COMMAND_BOOT
-%token TOK_COMMAND_EXEC
-%token TOK_SELECT
-%token TOK_STRING
-%token TOK_MODIFIER_BYTE
-%token TOK_MODIFIER_WORD
-%token TOK_MODIFIER_LONG
-%token TOK_MODIFIER_MEMSET
-%token TOK_COMMAND_MEMSET
-%token TOK_COMMAND_MEMDUMP
-%token TOK_COMMAND_QUIT
-%token TOK_ERROR
-%token TOK_END
-%token TOK_ISA
-%token TOK_PCI
-%token TOK_BYTE
-%token TOK_WORD
-%token TOK_LONG
-%token TOK_PRINT_PORT
-%token TOK_IOSTAT
-%token TOK_PRINT_IRQ
-%token TOK_PPCI
-%token TOK_PIP
-%token TOK_TRACE
-%token TOK_ON
-%token TOK_OFF
-%token TOK_VERBOSE
-%token TOK_LOG
-%token TOK_LOGOFF
-%token TOK_CLSTAT
-%token TOK_STDOUT
-%token TOK_HLT
-%token TOK_DEL
-%token TOK_IOPERM
-%token TOK_DUMP_PCI
-%token TOK_BOOT_BIOS
-%%
-input: | input line
-line: end | com_reg | com_var | com_select
- | com_boot | com_memset | com_memdump | com_quit
- | com_exec | hlp | config | verbose | logging | print | clstat
- | com_hlt | ioperm | list_pci | boot_bios
- | error end { printf("unknown command\n"); }
-;
-end: TOK_END
-;
-com_reg: reg_off val end { *(CARD16*)$1 = $2 & 0xffff; }
- | reg_seg TOK_SEP reg_off val end {
- *(CARD16*)$1 = ($4 & 0xf0000) >> 4;
- *(CARD16*)$3 = ($4 & 0x0ffff);
- }
- | reg_off '?' end { printf("0x%x\n",*(CARD16*)$1);}
- | reg_seg TOK_SEP reg_off '?' end
- { printf("0x%x:0x%x\n",*(CARD16*)$1,
- *(CARD16*)$3); }
-;
-register_read: reg_seg TOK_SEP reg_off { $$ = (((*(CARD16*)$1) << 4)
- | ((*(CARD16*)$3) & 0xffff));
- }
- | reg_off { $$ = ((*(CARD16*)$1) & 0xffff); }
-;
-reg_off: TOK_REG_AX { $$ = (unsigned long)&(regs.ax); }
- | TOK_REG_BX { $$ = (unsigned long)&(regs.bx); }
- | TOK_REG_CX { $$ = (unsigned long)&(regs.cx); }
- | TOK_REG_DX { $$ = (unsigned long)&(regs.dx); }
- | TOK_REG_DI { $$ = (unsigned long)&(regs.di); }
- | TOK_REG_SI { $$ = (unsigned long)&(regs.si); }
-;
-reg_seg: TOK_SEG_DS { $$ = (unsigned long)&(regs.ds); }
- | TOK_SEG_ES { $$ = (unsigned long)&(regs.es); }
-;
-com_var: TOK_VAR_MEM '?' end { printf("var mem: 0x%x\n",var_mem); }
- | TOK_VAR '?' end { if ($1 < MAX_VAR)
- printf("var[%i]: 0x%x\n",(int)$1,var[$1]);
- else
- printf("var index %i out of range\n",(int)$1); }
- | TOK_VAR_MEM val end { var_mem = $2; }
- | TOK_VAR val end { if ($1 <= MAX_VAR)
- var[$1] = $2;
- else
- printf("var index %i out of range\n",(int)$1); }
- | TOK_VAR error end { printf("$i val\n"); }
- | TOK_VAR_MEM error end { printf("$i val\n"); }
-;
-com_boot: TOK_COMMAND_BOOT end { boot(); }
- TOK_COMMAND_BOOT error end { boot(); }
-;
-com_select: TOK_SELECT TOK_ISA end { Device.booted = FALSE;
- Device.type = ISA;
- CurrentPci = NULL; }
- | TOK_SELECT TOK_PCI val TOK_SEP val TOK_SEP val end
- { Device.booted = FALSE;
- Device.type = PCI;
- Device.loc.pci.bus = $3;
- Device.loc.pci.dev = $5;
- Device.loc.pci.func = $7; }
- | TOK_SELECT '?' end
- { switch (Device.type) {
- case ISA:
- printf("isa\n");
- break;
- case PCI:
- printf("pci: %x:%x:%x\n",Device.loc.pci.bus,
- Device.loc.pci.dev,
- Device.loc.pci.func);
- break;
- default:
- printf("no device selected\n");
- break;
- }
- }
- | TOK_SELECT error end { printf("select ? | isa "
- "| pci:bus:dev:func\n"); }
-;
-com_quit: TOK_COMMAND_QUIT end { return 0; }
- | TOK_COMMAND_QUIT error end { logoff(); return 0; }
-;
-com_exec: TOK_COMMAND_EXEC end { exec_int(0x10); }
- | TOK_COMMAND_EXEC val end { exec_int($2); }
- | TOK_COMMAND_EXEC error end { exec_int(0x10); }
-;
-com_memdump: TOK_COMMAND_MEMDUMP val val end { dump_mem($2,$3); }
- | TOK_COMMAND_MEMDUMP error end { printf("memdump start len\n"); }
-
-
-;
-com_memset: TOK_COMMAND_MEMSET val list end { do_list((struct mem*)$3,$2);}
- | TOK_COMMAND_MEMSET error end { printf("setmem addr [byte val] "
- "[word val] [long val] "
- "[\"string\"]\n"); }
-;
-list: { $$ = 0; }
- | TOK_BYTE val list { rec.integer = $2;
- $$ = (unsigned long)add_to_list(BYTE,&rec,(void*)$3); }
- | TOK_WORD val list { rec.integer = $2;
- $$ = (unsigned long) add_to_list(WORD,&rec,(void*)$3); }
- | TOK_LONG val list { rec.integer = $2;
- $$ = (unsigned long) add_to_list(LONG,&rec,(void*)$3); }
- | TOK_STRING list { rec.ptr = (void*)$1;
- $$ = (unsigned long) add_to_list(STRING,&rec,(void*)$2); }
-;
-val: TOK_VAR { if ($1 > MAX_VAR) {
- printf("variable index out of range\n");
- $$=0;
- } else
- $$ = var[$1]; }
- | TOK_NUM { $$ = $1; }
- | register_read
-;
-bool: TOK_ON { $$ = 1; }
- | TOK_OFF { $$ = 0; }
-;
-config: TOK_PRINT_PORT bool end { Config.PrintPort = $2; }
- | TOK_PRINT_PORT '?' end { printf("print port %s\n",
- Config.PrintPort?"on":"off"); }
- | TOK_PRINT_PORT error end { printf("pport on | off | ?\n") }
- | TOK_PRINT_IRQ bool end { Config.PrintIrq = $2; }
- | TOK_PRINT_IRQ '?' end { printf("print irq %s\n",
- Config.PrintIrq?"on":"off"); }
- | TOK_PRINT_IRQ error end { printf("pirq on | off | ?\n") }
- | TOK_PPCI bool end { Config.PrintPci = $2; }
- | TOK_PPCI '?' end { printf("print PCI %s\n",
- Config.PrintPci?"on":"off"); }
- | TOK_PPCI error end { printf("ppci on | off | ?\n") }
- | TOK_PIP bool end { Config.PrintIp = $2; }
- | TOK_PIP '?' end { printf("printip %s\n",
- Config.PrintIp?"on":"off"); }
- | TOK_PIP error end { printf("pip on | off | ?\n") }
- | TOK_IOSTAT bool end { Config.IoStatistics = $2; }
- | TOK_IOSTAT '?' end { printf("io statistics %s\n",
- Config.IoStatistics?"on":"off"); }
- | TOK_IOSTAT error end { printf("iostat on | off | ?\n") }
- | TOK_TRACE bool end { Config.Trace = $2; }
- | TOK_TRACE '?' end { printf("trace %s\n",
- Config.Trace ?"on":"off"); }
- | TOK_TRACE error end { printf("trace on | off | ?\n") }
-;
-verbose: TOK_VERBOSE val end { Config.Verbose = $2; }
- | TOK_VERBOSE '?' end { printf("verbose: %i\n",
- Config.Verbose); }
- | TOK_VERBOSE error end { printf("verbose val | ?\n"); }
-;
-logging: TOK_LOG TOK_STRING end { logon(normalize_string((char*)$2)); }
- | TOK_LOG '?' end { if (logging) printf("logfile: %s\n",
- logfile);
- else printf("no logging\n?"); }
- | TOK_LOG TOK_OFF end { logoff(); }
- | TOK_LOG error end { printf("log \"<filename>\" | ? |"
- " off\n"); }
-;
-clstat: TOK_CLSTAT end { clear_stat(); }
- | TOK_CLSTAT error end { printf("clstat\n"); }
-;
-print: TOK_STDOUT bool end { nostdout = !$2; }
- | TOK_STDOUT '?' end { printf("print %s\n",nostdout ?
- "no":"yes"); }
- | TOK_STDOUT error end { printf("print on | off\n"); }
-;
-com_hlt: TOK_HLT val end { add_hlt($2); }
- | TOK_HLT TOK_DEL val end { del_hlt($3); }
- | TOK_HLT TOK_DEL end { del_hlt(21); }
- | TOK_HLT '?' end { list_hlt(); }
- | TOK_HLT error end { printf(
- "hlt val | del [val] | ?\n"); }
-;
-ioperm: TOK_IOPERM val val val end { int i,max;
- if ($2 >= 0) {
- max = $2 + $3 - 1;
- if (max > IOPERM_BITS)
- max = IOPERM_BITS;
- for (i = $2;i <= max; i++)
- ioperm_list[i]
- = $4>0 ? 1 : 0;
- }
- }
- | TOK_IOPERM '?' end { int i,start;
- for (i=0; i <= IOPERM_BITS; i++) {
- if (ioperm_list[i]) {
- start = i;
- for (; i <= IOPERM_BITS; i++)
- if (!ioperm_list[i]) {
- printf("ioperm on in "
- "0x%x+0x%x\n", start,i-start);
- break;
- }
- }
- }
- }
- | TOK_IOPERM error end { printf("ioperm start len val\n"); }
-;
-list_pci: TOK_DUMP_PCI end { list_pci(); }
- | TOK_DUMP_PCI error end { list_pci(); }
-;
-boot_bios: TOK_BOOT_BIOS '?' end { if (!BootBios) printf("No Boot BIOS\n");
- else printf("BootBIOS from: %i:%i:%i\n",
- BootBios->bus, BootBios->dev,
- BootBios->func); }
- | TOK_BOOT_BIOS error end { printf ("bootbios bus:dev:num\n"); }
-;
-hlp: '?' { printf("Command list:\n");
- printf(" select isa | pci bus:dev:func\n");
- printf(" boot\n");
- printf(" seg:reg val | reg val \n");
- printf(" $x val | $mem val\n");
- printf(" setmem addr list; addr := val\n");
- printf(" dumpmem addr len; addr,len := val\n");
- printf(" do [val]\n");
- printf(" quit\n");
- printf(" ?\n");
- printf(" seg := ds | es;"
- " reg := ax | bx | cx | dx | si \n");
- printf(" val := var | <hex-number> | seg:reg | seg\n");
- printf(" var := $x | $mem; x := 0..20\n");
- printf(" list := byte val | word val | long val "
- "| \"string\"\n");
- printf(" pport on | off | ?\n");
- printf(" ppci on | off | ?\n");
- printf(" pirq on | off | ?\n");
- printf(" pip on | off | ?\n");
- printf(" trace on | off | ?\n");
- printf(" iostat on | off | ?\n");
- printf(" verbose val\n");
- printf(" log \"<filename>\" | off | ?\n");
- printf(" print on | off\n");
- printf(" hlt val | del [val] | ?\n");
- printf(" clstat\n");
- printf(" lpci\n");
- printf ("bootbios ?\n");
-}
-;
-
-%%
-
-static void
-dump_mem(CARD32 addr, int len)
-{
- dprint(addr,len);
-}
-
-static void
-exec_int(int num)
-{
- if (num == 0x10) { /* video interrupt */
- if (Device.type == NONE) {
- CurrentPci = PciList;
- while (CurrentPci) {
- if (CurrentPci->active)
- break;
- CurrentPci = CurrentPci->next;
- }
- if (!CurrentPci)
- Device.type = ISA;
- else {
- Device.type = PCI;
- Device.loc.pci.dev = CurrentPci->dev;
- Device.loc.pci.bus = CurrentPci->bus;
- Device.loc.pci.func = CurrentPci->func;
- }
- }
- if (Device.type != ISA) {
- if (!Device.booted) {
- if (!CurrentPci || (Device.type == PCI
- && (!CurrentPci->active
- && (Device.loc.pci.dev != CurrentPci->dev
- || Device.loc.pci.bus != CurrentPci->bus
- || Device.loc.pci.func != CurrentPci->func)))) {
- printf("boot the device fist\n");
- return;
- }
- }
- } else
- CurrentPci = NULL;
- } else {
- Device.booted = FALSE; /* we need this for sanity! */
- }
-
- runINT(num,&regs);
-}
-
-static void
-boot(void)
-{
- if (Device.type == NONE) {
- printf("select a device fist\n");
- return;
- }
-
- call_boot(&Device);
-}
-
-static void *
-add_to_list(enum mem_type type, union mem_val *rec, void *next)
-{
- struct mem *mem_rec = (struct mem *) malloc(sizeof(mem_rec));
-
- mem_rec->type = type;
- mem_rec->next = next;
-
- switch (type) {
- case BYTE:
- case WORD:
- case LONG:
- mem_rec->val.integer = rec->integer;
- break;
- case STRING:
- mem_rec->val.ptr = normalize_string(rec->ptr);
- break;
- }
- return mem_rec;
-}
-
-static int
-validRange(int addr,int len)
-{
- int end = addr + len;
-
- if (addr < 0x1000 || end > 0xc0000)
- return 0;
- return 1;
-}
-
-static void
-do_list(struct mem *list, memType addr)
-{
- struct mem *prev;
- int len;
-
- while (list) {
- switch (list->type) {
- case BYTE:
- if (!validRange(addr,1)) goto error;
- *(CARD8*)addr = list->val.integer;
- addr =+ 1;
- break;
- case WORD:
- if (!validRange(addr,2)) goto error;
- *(CARD16*)addr = list->val.integer;
- addr =+ 2;
- break;
- case LONG:
- if (!validRange(addr,4)) goto error;
- *(CARD32*)addr = list->val.integer;
- addr =+ 4;
- break;
- case STRING:
- len = strlen((char*)list->val.ptr);
- if (!validRange(addr,len)) goto error;
- memcpy((CARD8*)addr,(void*)list->val.ptr,len);
- addr =+ len;
- free(list->val.ptr);
- break;
- }
- prev = list;
- list = list->next;
- free(prev);
- continue;
- error:
- printf("address out of range\n");
- while (list) {
- prev = list;
- list = list->next;
- free(prev);
- }
- break;
- }
-}
-
-static char *
-normalize_string(char *ptr)
-{
- int i = 0, j = 0, c = 0, esc= 0;
- int size;
- char *mem_ptr;
-
- size = strlen(ptr);
- mem_ptr = malloc(size);
- while (1) {
- switch (*(ptr + i)) {
- case '\\':
- if (esc) {
- *(mem_ptr + j++) = *(ptr + i);
- esc = 0;
- } else
- esc = 1;
- break;
- case '\"':
- if (esc) {
- *(mem_ptr + j++) = *(ptr + i);
- esc = 0;
- } else
- c++;
- break;
- default:
- *(mem_ptr + j++) = *(ptr + i);
- break;
- }
- if (c > 1) {
- *(mem_ptr + j) = '\0';
- break;
- }
- i++;
- }
- return mem_ptr;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/pci.c b/board/MAI/bios_emulator/scitech/src/v86bios/pci.c
deleted file mode 100644
index b58a57195f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/pci.c
+++ /dev/null
@@ -1,902 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission. The authors makes no representations
- * about the suitability of this software for any purpose. It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-#include "debug.h"
-#include <fcntl.h>
-#include <unistd.h>
-#include <malloc.h>
-#include <stdio.h>
-#include <sys/mman.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <string.h>
-#if defined (__alpha__) || defined (__ia64__)
-#include <sys/io.h>
-#endif
-#include "AsmMacros.h"
-
-#include "pci.h"
-
-/*
- * I'm rather simple mindend - therefore I do a poor man's
- * pci scan without all the fancy stuff that is done in
- * scanpci. However that's all we need.
- */
-
-PciStructPtr PciStruct = NULL;
-PciBusPtr PciBuses = NULL;
-PciStructPtr CurrentPci = NULL;
-PciStructPtr PciList = NULL;
-PciStructPtr BootBios = NULL;
-int pciMaxBus = 0;
-
-static CARD32 PciCfg1Addr;
-
-static void readConfigSpaceCfg1(CARD32 bus, CARD32 dev, CARD32 func,
- CARD32 *reg);
-static int checkSlotCfg1(CARD32 bus, CARD32 dev, CARD32 func);
-static int checkSlotCfg2(CARD32 bus, int dev);
-static void readConfigSpaceCfg2(CARD32 bus, int dev, CARD32 *reg);
-static CARD8 interpretConfigSpace(CARD32 *reg, int busidx,
- CARD8 dev, CARD8 func);
-static CARD32 findBIOSMap(PciStructPtr pciP, CARD32 *biosSize);
-static void restoreMem(PciStructPtr pciP);
-
-
-#ifdef __alpha__
-#define PCI_BUS_FROM_TAG(tag) (((tag) & 0x00ff0000) >> 16)
-#define PCI_DFN_FROM_TAG(tag) (((tag) & 0x0000ff00) >> 8)
-
-#include <asm/unistd.h>
-
-CARD32
-axpPciCfgRead(CARD32 tag)
-{
- int bus, dfn;
- CARD32 val = 0xffffffff;
-
- bus = PCI_BUS_FROM_TAG(tag);
- dfn = PCI_DFN_FROM_TAG(tag);
-
- syscall(__NR_pciconfig_read, bus, dfn, tag & 0xff, 4, &val);
- return(val);
-}
-
-void
-axpPciCfgWrite(CARD32 tag, CARD32 val)
-{
- int bus, dfn;
-
- bus = PCI_BUS_FROM_TAG(tag);
- dfn = PCI_DFN_FROM_TAG(tag);
-
- syscall(__NR_pciconfig_write, bus, dfn, tag & 0xff, 4, &val);
-}
-
-static CARD32 (*readPci)(CARD32 reg) = axpPciCfgRead;
-static void (*writePci)(CARD32 reg, CARD32 val) = axpPciCfgWrite;
-#else
-static CARD32 readPciCfg1(CARD32 reg);
-static void writePciCfg1(CARD32 reg, CARD32 val);
-static CARD32 readPciCfg2(CARD32 reg);
-static void writePciCfg2(CARD32 reg, CARD32 val);
-
-static CARD32 (*readPci)(CARD32 reg) = readPciCfg1;
-static void (*writePci)(CARD32 reg, CARD32 val) = writePciCfg1;
-#endif
-
-#if defined(__alpha__) || defined(__sparc__)
-#define PCI_EN 0x00000000
-#else
-#define PCI_EN 0x80000000
-#endif
-
-
-static int numbus;
-static int hostbridges = 1;
-static unsigned long pciMinMemReg = ~0;
-
-
-void
-scan_pci(void)
-{
- unsigned short configtype;
-
- CARD32 reg[64];
- int busidx;
- CARD8 cardnum;
- CARD8 func;
- int idx;
-
- int i;
- PciStructPtr pci1;
- PciBusPtr pci_b1,pci_b2;
-
-#if defined(__alpha__) || defined(__powerpc__) || defined(__sparc__) || defined(__ia64__)
- configtype = 1;
-#else
- CARD8 tmp1, tmp2;
- CARD32 tmp32_1, tmp32_2;
- outb(PCI_MODE2_ENABLE_REG, 0x00);
- outb(PCI_MODE2_FORWARD_REG, 0x00);
- tmp1 = inb(PCI_MODE2_ENABLE_REG);
- tmp2 = inb(PCI_MODE2_FORWARD_REG);
- if ((tmp1 == 0x00) && (tmp2 == 0x00)) {
- configtype = 2;
- readPci = readPciCfg2;
- writePci = writePciCfg2;
- P_printf("PCI says configuration type 2\n");
- } else {
- tmp32_1 = inl(PCI_MODE1_ADDRESS_REG);
- outl(PCI_MODE1_ADDRESS_REG, PCI_EN);
- tmp32_2 = inl(PCI_MODE1_ADDRESS_REG);
- outl(PCI_MODE1_ADDRESS_REG, tmp32_1);
- if (tmp32_2 == PCI_EN) {
- configtype = 1;
- P_printf("PCI says configuration type 1\n");
- } else {
- P_printf("No PCI !\n");
- return;
- }
- }
-#endif
-
- if (configtype == 1) {
- P_printf("PCI probing configuration type 1\n");
- busidx = 0;
- numbus = 1;
- idx = 0;
- do {
- P_printf("\nProbing for devices on PCI bus %d:\n", busidx);
- for (cardnum = 0; cardnum < MAX_DEV_PER_VENDOR_CFG1; cardnum++) {
- func = 0;
- do {
- /* loop over the different functions, if present */
- if (!checkSlotCfg1(busidx,cardnum,func))
- break;
- readConfigSpaceCfg1(busidx,cardnum,func,reg);
-
- func = interpretConfigSpace(reg,busidx,
- cardnum,func);
-
- if (idx++ > MAX_PCI_DEVICES)
- continue;
- } while (func < 8);
- }
- } while (++busidx < PCI_MAXBUS);
-#if defined(__alpha__) || defined(__powerpc__) || defined(__sparc__) || defined(__ia64__)
- /* don't use outl() ;-) */
-#else
- outl(PCI_MODE1_ADDRESS_REG, 0);
-#endif
- } else {
- int slot;
-
- P_printf("PCI probing configuration type 2\n");
- busidx = 0;
- numbus = 1;
- idx = 0;
- do {
- for (slot=0xc0; slot<0xd0; i++) {
- if (!checkSlotCfg2(busidx,slot))
- break;
- readConfigSpaceCfg2(busidx,slot,reg);
-
- interpretConfigSpace(reg,busidx,
- slot,0);
- if (idx++ > MAX_PCI_DEVICES)
- continue;
- }
- } while (++busidx < PCI_MAXBUS);
- }
-
-
- pciMaxBus = numbus - 1;
- P_printf("Number of buses in system: %i\n",pciMaxBus + 1);
- P_printf("Min PCI mem address: 0x%lx\n",pciMinMemReg);
-
- /* link buses */
- pci_b1 = PciBuses;
- while (pci_b1) {
- pci_b2 = PciBuses;
- pci_b1->pBus = NULL;
- while (pci_b2) {
- if (pci_b1->primary == pci_b2->secondary)
- pci_b1->pBus = pci_b2;
- pci_b2 = pci_b2->next;
- }
- pci_b1 = pci_b1->next;
- }
- pci1 = PciStruct;
- while (pci1) {
- pci_b2 = PciBuses;
- pci1->pBus = NULL;
- while (pci_b2) {
- if (pci1->bus == pci_b2->secondary)
- pci1->pBus = pci_b2;
- pci_b2 = pci_b2->next;
- }
- pci1 = pci1->next;
- }
- if (RESORT) {
- PciStructPtr tmp = PciStruct, tmp1;
- PciStruct = NULL;
- while (tmp) {
- tmp1 = tmp->next;
- tmp->next = PciStruct;
- PciStruct = tmp;
- tmp = tmp1;
- }
- }
- PciList = CurrentPci = PciStruct;
-}
-
-#ifndef __alpha__
-static CARD32
-readPciCfg1(CARD32 reg)
-{
- CARD32 val;
-
- outl(PCI_MODE1_ADDRESS_REG, reg);
- val = inl(PCI_MODE1_DATA_REG);
- outl(PCI_MODE1_ADDRESS_REG, 0);
- P_printf("reading: 0x%x from 0x%x\n",val,reg);
- return val;
-}
-
-static void
-writePciCfg1(CARD32 reg, CARD32 val)
-{
- P_printf("writing: 0x%x to 0x%x\n",val,reg);
- outl(PCI_MODE1_ADDRESS_REG, reg);
- outl(PCI_MODE1_DATA_REG,val);
- outl(PCI_MODE1_ADDRESS_REG, 0);
-}
-
-static CARD32
-readPciCfg2(CARD32 reg)
-{
- CARD32 val;
- CARD8 bus = (reg >> 16) & 0xff;
- CARD8 dev = (reg >> 11) & 0x1f;
- CARD8 num = reg & 0xff;
-
- outb(PCI_MODE2_ENABLE_REG, 0xF1);
- outb(PCI_MODE2_FORWARD_REG, bus);
- val = inl((dev << 8) + num);
- outb(PCI_MODE2_ENABLE_REG, 0x00);
- P_printf("reading: 0x%x from 0x%x\n",val,reg);
- return val;
-}
-
-static void
-writePciCfg2(CARD32 reg, CARD32 val)
-{
- CARD8 bus = (reg >> 16) & 0xff;
- CARD8 dev = (reg >> 11) & 0x1f;
- CARD8 num = reg & 0xff;
-
- P_printf("writing: 0x%x to 0x%x\n",val,reg);
- outb(PCI_MODE2_ENABLE_REG, 0xF1);
- outb(PCI_MODE2_FORWARD_REG, bus);
- outl((dev << 8) + num,val);
- outb(PCI_MODE2_ENABLE_REG, 0x00);
-}
-#endif
-
-void
-pciVideoDisable(void)
-{
- /* disable VGA routing on bridges */
- PciBusPtr pbp = PciBuses;
- PciStructPtr pcp = PciStruct;
-
- while (pbp) {
- writePci(pbp->Slot.l | 0x3c, pbp->bctl & ~(CARD32)(8<<16));
- pbp = pbp->next;
- }
- /* disable display devices */
- while (pcp) {
- writePci(pcp->Slot.l | 0x04, pcp->cmd_st & ~(CARD32)3);
- writePci(pcp->Slot.l | 0x30, pcp->RomBase & ~(CARD32)1);
- pcp = pcp->next;
- }
-}
-
-void
-pciVideoRestore(void)
-{
- /* disable VGA routing on bridges */
- PciBusPtr pbp = PciBuses;
- PciStructPtr pcp = PciStruct;
-
- while (pbp) {
- writePci(pbp->Slot.l | 0x3c, pbp->bctl);
- pbp = pbp->next;
- }
- /* disable display devices */
- while (pcp) {
- writePci(pcp->Slot.l | 0x04, pcp->cmd_st);
- writePci(pcp->Slot.l | 0x30, pcp->RomBase);
- pcp = pcp->next;
- }
-}
-
-void
-EnableCurrent()
-{
- PciBusPtr pbp;
- PciStructPtr pcp = CurrentPci;
-
- pciVideoDisable();
-
- pbp = pcp->pBus;
- while (pbp) { /* enable bridges */
- writePci(pbp->Slot.l | 0x3c, pbp->bctl | (CARD32)(8<<16));
- pbp = pbp->pBus;
- }
- writePci(pcp->Slot.l | 0x04, pcp->cmd_st | (CARD32)3);
- writePci(pcp->Slot.l | 0x30, pcp->RomBase | (CARD32)1);
-}
-
-CARD8
-PciRead8(int offset, CARD32 Slot)
-{
- int shift = offset & 0x3;
- offset = offset & 0xFC;
- return ((readPci(Slot | offset) >> (shift << 3)) & 0xff);
-}
-
-CARD16
-PciRead16(int offset, CARD32 Slot)
-{
- int shift = offset & 0x2;
- offset = offset & 0xFC;
- return ((readPci(Slot | offset) >> (shift << 3)) & 0xffff);
-}
-
-CARD32
-PciRead32(int offset, CARD32 Slot)
-{
- offset = offset & 0xFC;
- return (readPci(Slot | offset));
-}
-
-void
-PciWrite8(int offset, CARD8 byte, CARD32 Slot)
-{
- CARD32 val;
- int shift = offset & 0x3;
- offset = offset & 0xFC;
- val = readPci(Slot | offset);
- val &= ~(CARD32)(0xff << (shift << 3));
- val |= byte << (shift << 3);
- writePci(Slot | offset, val);
-}
-
-void
-PciWrite16(int offset, CARD16 word, CARD32 Slot)
-{
- CARD32 val;
- int shift = offset & 0x2;
- offset = offset & 0xFC;
- val = readPci(Slot | offset);
- val &= ~(CARD32)(0xffff << (shift << 3));
- val |= word << (shift << 3);
- writePci(Slot | offset, val);
-}
-
-void
-PciWrite32(int offset, CARD32 lg, CARD32 Slot)
-{
- offset = offset & 0xFC;
- writePci(Slot | offset, lg);
-}
-
-int
-mapPciRom(PciStructPtr pciP)
-{
- unsigned long RomBase = 0;
- int mem_fd;
- unsigned char *mem, *ptr;
- unsigned char *scratch = NULL;
- int length = 0;
- CARD32 biosSize = 0x1000000;
- CARD32 enablePci;
-
- if (!pciP)
- pciP = CurrentPci;
-
- if (FIX_ROM) {
- RomBase = findBIOSMap(pciP, &biosSize);
- if (!RomBase) {
- fprintf(stderr,"Cannot remap BIOS of %i:%i:%i "
- "- trying preset address\n",pciP->bus,pciP->dev,
- pciP->func);
- RomBase = pciP->RomBase & ~(CARD32)0xFF;
- }
- } else {
- RomBase = pciP->RomBase & ~(CARD32)0xFF;
- if (~RomBase + 1 < biosSize || !RomBase)
- RomBase = findBIOSMap(pciP, &biosSize);
- }
-
- P_printf("RomBase: 0x%lx\n",RomBase);
-
- if ((mem_fd = open(MEM_FILE,O_RDONLY))<0) {
- perror("opening memory");
- restoreMem(pciP);
- return (0);
- }
-
- PciWrite32(0x30,RomBase | 1,pciP->Slot.l);
-
-#ifdef __alpha__
- mem = ptr = (unsigned char *)mmap(0, biosSize, PROT_READ,
- MAP_SHARED, mem_fd, RomBase | _bus_base());
-#else
- mem = ptr = (unsigned char *)mmap(0, biosSize, PROT_READ,
- MAP_SHARED, mem_fd, RomBase);
-#endif
- if (pciP != CurrentPci) {
- enablePci = PciRead32(0x4,pciP->Slot.l);
- PciWrite32(0x4,enablePci | 0x2,pciP->Slot.l);
- }
-
-#ifdef PRINT_PCI
- dprint((unsigned long)ptr,0x30);
-#endif
- while ( *ptr == 0x55 && *(ptr+1) == 0xAA) {
- unsigned short data_off = *(ptr+0x18) | (*(ptr+0x19)<< 8);
- unsigned char *data = ptr + data_off;
- unsigned char type;
- int i;
-
- if (*data!='P' || *(data+1)!='C' || *(data+2)!='I' || *(data+3)!='R') {
- break;
- }
- type = *(data + 0x14);
- P_printf("data segment in BIOS: 0x%x, type: 0x%x ",data_off,type);
-
- if (type != 0) { /* not PC-AT image: find next one */
- unsigned int image_length;
- unsigned char indicator = *(data + 0x15);
- if (indicator & 0x80) /* last image */
- break;
- image_length = (*(data + 0x10)
- | (*(data + 0x11) << 8)) << 9;
- P_printf("data image length: 0x%x, ind: 0x%x\n",
- image_length,indicator);
- ptr = ptr + image_length;
- continue;
- }
- /* OK, we have a PC Image */
- length = (*(ptr + 2) << 9);
- P_printf("BIOS length: 0x%x\n",length);
- scratch = (unsigned char *)malloc(length);
- /* don't use memcpy() here: Reading from bus! */
- for (i=0;i<length;i++)
- *(scratch + i)=*(ptr + i);
- break;
- }
-
- if (pciP != CurrentPci)
- PciWrite32(0x4,enablePci,pciP->Slot.l);
-
- /* unmap/close/disable PCI bios mem */
- munmap(mem, biosSize);
- close(mem_fd);
- /* disable and restore mapping */
- writePci(pciP->Slot.l | 0x30, pciP->RomBase & ~(CARD32)1);
-
- if (scratch && length) {
- memcpy((unsigned char *)V_BIOS, scratch, length);
- free(scratch);
- }
-
- restoreMem(pciP);
- return length;
-}
-
-CARD32
-findPci(CARD16 slotBX)
-{
- CARD32 slot = slotBX << 8;
-
- if (slot == (CurrentPci->Slot.l & ~PCI_EN))
- return (CurrentPci->Slot.l | PCI_EN);
- else {
-#if !SHOW_ALL_DEV
- PciBusPtr pBus = CurrentPci->pBus;
- while (pBus) {
- /* fprintf(stderr,"slot: 0x%x bridge: 0x%x\n",slot, pBus->Slot.l); */
- if (slot == (pBus->Slot.l & ~PCI_EN))
- return pBus->Slot.l | PCI_EN;
- pBus = pBus->next;
- }
-#else
- PciStructPtr pPci = PciStruct;
- while (pPci) {
- /*fprintf(stderr,"slot: 0x%x bridge: 0x%x\n",slot, pPci->Slot.l); */
- if (slot == (pPci->Slot.l & ~PCI_EN))
- return pPci->Slot.l | PCI_EN;
- pPci = pPci->next;
- }
-#endif
- }
- return 0;
-}
-
-CARD16
-pciSlotBX(PciStructPtr pPci)
-{
- return (CARD16)((pPci->Slot.l >> 8) & 0xFFFF);
-}
-
-PciStructPtr
-findPciDevice(CARD16 vendorID, CARD16 deviceID, char n)
-{
- PciStructPtr pPci = CurrentPci;
- n++;
-
- while (pPci) {
- if ((pPci->VendorID == vendorID) && (pPci->DeviceID == deviceID)) {
- if (!(--n)) break;
- }
- pPci = pPci->next;
- }
- return pPci;
-}
-
-PciStructPtr
-findPciClass(CARD8 intf, CARD8 subClass, CARD16 class, char n)
-{
- PciStructPtr pPci = CurrentPci;
- n++;
-
- while (pPci) {
- if ((pPci->Interface == intf) && (pPci->SubClass == subClass)
- && (pPci->BaseClass == class)) {
- if (!(--n)) break;
- }
- pPci = pPci->next;
- }
- return pPci;
-}
-
-static void
-readConfigSpaceCfg1(CARD32 bus, CARD32 dev, CARD32 func, CARD32 *reg)
-{
- CARD32 config_cmd = PCI_EN | (bus<<16) |
- (dev<<11) | (func<<8);
- int i;
-
- for (i = 0; i<64;i+=4) {
-#ifdef __alpha__
- reg[i] = axpPciCfgRead(config_cmd | i);
-#else
- outl(PCI_MODE1_ADDRESS_REG, config_cmd | i);
- reg[i] = inl(PCI_MODE1_DATA_REG);
-#endif
-
-#ifdef V86BIOS_DEBUG
- P_printf("0x%lx\n",reg[i]);
-#endif
- }
-}
-
-static int
-checkSlotCfg1(CARD32 bus, CARD32 dev, CARD32 func)
-{
- CARD32 config_cmd = PCI_EN | (bus<<16) |
- (dev<<11) | (func<<8);
- CARD32 reg;
-#ifdef __alpha__
- reg = axpPciCfgRead(config_cmd);
-#else
- outl(PCI_MODE1_ADDRESS_REG, config_cmd);
- reg = inl(PCI_MODE1_DATA_REG);
-#endif
- if (reg != 0xFFFFFFFF)
- return 1;
- else
- return 0;
-}
-
-static int
-checkSlotCfg2(CARD32 bus, int dev)
-{
- CARD32 val;
-
- outb(PCI_MODE2_ENABLE_REG, 0xF1);
- outb(PCI_MODE2_FORWARD_REG, bus);
- val = inl(dev << 8);
- outb(PCI_MODE2_FORWARD_REG, 0x00);
- outb(PCI_MODE2_ENABLE_REG, 0x00);
- if (val == 0xFFFFFFFF)
- return 0;
- if (val == 0xF0F0F0F0)
- return 0;
- return 1;
-}
-
-static void
-readConfigSpaceCfg2(CARD32 bus, int dev, CARD32 *reg)
-{
- int i;
-
- outb(PCI_MODE2_ENABLE_REG, 0xF1);
- outb(PCI_MODE2_FORWARD_REG, bus);
- for (i = 0; i<64;i+=4) {
- reg[i] = inl((dev << 8) + i);
-#ifdef V86BIOS_DEBUG
- P_printf("0x%lx\n",reg[i]);
-#endif
- }
- outb(PCI_MODE2_ENABLE_REG, 0x00);
-}
-
-static CARD8
-interpretConfigSpace(CARD32 *reg, int busidx, CARD8 dev, CARD8 func)
-{
- CARD32 config_cmd;
- CARD16 vendor, device;
- CARD8 baseclass, subclass;
- CARD8 primary, secondary;
- CARD8 header, interface;
- int i;
-
- config_cmd = PCI_EN | busidx<<16 |
- (dev<<11) | (func<<8);
-
- for (i = 0x10; i < 0x28; i+=4) {
- if (IS_MEM32(reg[i]))
- if ((reg[i] & 0xFFFFFFF0) < pciMinMemReg)
- pciMinMemReg = (reg[i] & 0xFFFFFFF0);
-#ifdef __alpha__
- if (IS_MEM64(reg[i])) {
- unsigned long addr = reg[i] |
- (unsigned long)(reg[i+4]) << 32;
- if ((addr & ~0xfL) < pciMinMemReg)
- pciMinMemReg = (addr & ~0xfL);
- i+=4;
- }
-#endif
- }
- vendor = reg[0] & 0xFFFF;
- device = reg[0] >> 16;
- P_printf("bus: %i card: %i func %i reg0: 0x%x ", busidx,dev,func,reg[0]);
- baseclass = reg[8] >> 24;
- subclass = (reg[8] >> 16) & 0xFF;
- interface = (reg[8] >> 8) & 0xFF;
-
- header = (reg[0x0c] >> 16) & 0xff;
- P_printf("bc 0x%x, sub 0x%x, if 0x%x, hdr 0x%x\n",
- baseclass,subclass,interface,header);
- if (BRIDGE_CLASS(baseclass)) {
- if (BRIDGE_PCI_CLASS(subclass)) {
- PciBusPtr pbp = malloc(sizeof(PciBusRec));
- P_printf("Pci-Pci Bridge found; ");
- primary = reg[0x18] & 0xFF;
- secondary = (reg[0x18] >> 8) & 0xFF;
- P_printf("primary: 0x%x secondary: 0x%x\n",
- primary,secondary);
- pbp->bctl = reg[0x3c];
- pbp->primary = primary;
- pbp->secondary = secondary;
- pbp->Slot.l = config_cmd;
- pbp->next = PciBuses;
- PciBuses = pbp;
- numbus++;
- } else if (BRIDGE_HOST_CLASS(subclass)
- && (hostbridges++ > 1)) {
- numbus++;
- }
- } else if (VIDEO_CLASS(baseclass,subclass)) {
- PciStructPtr pcp = malloc(sizeof(PciStructRec));
- P_printf("Display adapter found\n");
- pcp->RomBase = reg[0x30];
- pcp->cmd_st = reg[4];
- pcp->active = (reg[4] & 0x03) == 3 ? 1 : 0;
- pcp->VendorID = vendor;
- pcp->DeviceID = device;
- pcp->Interface = interface;
- pcp->BaseClass = baseclass;
- pcp->SubClass = subclass;
- pcp->Slot.l = config_cmd;
- pcp->bus = busidx;
- pcp->dev = dev;
- pcp->func = func;
- pcp->next = PciStruct;
- PciStruct = pcp;
- }
- if ((func == 0)
- && ((header & PCI_MULTIFUNC_DEV) == 0))
- func = 8;
- else
- func++;
- return func;
-}
-
-static CARD32 remapMEM_val;
-static int remapMEM_num;
-
-static int /* map it on some other video device */
-remapMem(PciStructPtr pciP, int num, CARD32 size)
-{
- PciStructPtr pciPtr = PciStruct;
- int i;
- CARD32 org;
- CARD32 val;
- CARD32 size_n;
-
- org = PciRead32(num + 0x10,pciP->Slot.l);
-
- while (pciPtr) {
- for (i = 0; i < 20; i=i+4) {
-
- val = PciRead32(i + 0x10,pciPtr->Slot.l);
- /* don't map it on itself */
- if ((org & 0xfffffff0) == (val & 0xfffffff0))
- continue;
- if (val && !(val & 1))
- PciWrite32(i + 0x10,0xffffffff,pciPtr->Slot.l);
- else
- continue;
- size_n = PciRead32(i + 0x10,pciPtr->Slot.l);
- PciWrite32(i + 0x10,val,pciPtr->Slot.l);
- size_n = ~(CARD32)(size_n & 0xfffffff0) + 1;
-
- if (size_n >= size) {
- PciWrite32(num + 0x10,val,pciP->Slot.l);
- return 1;
- }
- }
- pciPtr = pciPtr->next;
- }
- /* last resort: try to go below lowest PCI mem address */
- val = ((pciMinMemReg & ~(CARD32)(size - 1)) - size);
- if (val > 0x7fffffff) {
- PciWrite32(num + 0x10,val, pciP->Slot.l);
- return 1;
- }
-
- return 0;
-}
-
-static void
-restoreMem(PciStructPtr pciP)
-{
- if (remapMEM_val == 0) return;
- PciWrite32(remapMEM_num + 0x10,remapMEM_val,pciP->Slot.l);
- return;
-}
-
-static CARD32
-findBIOSMap(PciStructPtr pciP, CARD32 *biosSize)
-{
- PciStructPtr pciPtr = PciStruct;
- int i;
- CARD32 val;
- CARD32 size;
-
- PciWrite32(0x30,0xffffffff,pciP->Slot.l);
- *biosSize = PciRead32(0x30,pciP->Slot.l);
- P_printf("bios size: 0x%x\n",*biosSize);
- PciWrite32(0x30,pciP->RomBase,pciP->Slot.l);
- *biosSize = ~(*biosSize & 0xFFFFFF00) + 1;
- P_printf("bios size masked: 0x%x\n",*biosSize);
- if (*biosSize > (1024 * 1024 * 16)) {
- *biosSize = 1024 * 1024 * 16;
- P_printf("fixing broken BIOS size: 0x%x\n",*biosSize);
- }
- while (pciPtr) {
- if (pciPtr->bus != pciP->bus) {
- pciPtr = pciPtr->next;
- continue;
- }
- for (i = 0; i < 20; i=i+4) {
-
- val = PciRead32(i + 0x10,pciPtr->Slot.l);
- if (!(val & 1))
-
- PciWrite32(i + 0x10,0xffffffff,pciPtr->Slot.l);
- else
- continue;
- size = PciRead32(i + 0x10,pciPtr->Slot.l);
- PciWrite32(i + 0x10,val,pciPtr->Slot.l);
- size = ~(CARD32)(size & 0xFFFFFFF0) + 1;
-#ifdef V86_BIOS_DEBUG
- P_printf("size: 0x%x\n",size);
-#endif
- if (size >= *biosSize) {
- if (pciP == pciPtr) { /* if same device remap ram*/
- if (!(remapMem(pciP,i,size)))
- continue;
- remapMEM_val = val;
- remapMEM_num = i;
- } else {
- remapMEM_val = 0;
- }
- return val & 0xFFFFFF00;
- }
- }
- pciPtr = pciPtr->next;
- }
- remapMEM_val = 0;
- /* very last resort */
- if (pciP->bus == 0 && (pciMinMemReg > *biosSize))
- return (pciMinMemReg - size) & ~(size - 1);
-
- return 0;
-}
-
-int
-cfg1out(CARD16 addr, CARD32 val)
-{
- if (addr == 0xCF8) {
- PciCfg1Addr = val;
- return 1;
- } else if (addr == 0xCFC) {
- writePci(PciCfg1Addr, val);
- return 1;
- }
- return 0;
-}
-
-int
-cfg1in(CARD16 addr, CARD32 *val)
-{
- if (addr == 0xCF8) {
- *val = PciCfg1Addr;
- return 1;
- } else if (addr == 0xCFC) {
- *val = readPci(PciCfg1Addr);
- return 1;
- }
- return 0;
-}
-
-void
-list_pci(void)
-{
- PciStructPtr pci = PciList;
-
- while (pci) {
- printf("[0x%x:0x%x:0x%x] vendor: 0x%4.4x dev: 0x%4.4x class: 0x%4.4x"
- " subclass: 0x%4.4x\n",pci->bus,pci->dev,pci->func,
- pci->VendorID,pci->DeviceID,pci->BaseClass,pci->SubClass);
- pci = pci->next;
- }
-}
-
-PciStructPtr
-findPciByIDs(int bus, int dev, int func)
-{
- PciStructPtr pciP = PciList;
-
- while (pciP) {
- if (pciP->bus == bus && pciP->dev == dev && pciP->func == func)
- return pciP;
- pciP = pciP->next;
- }
- return NULL;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/pci.h b/board/MAI/bios_emulator/scitech/src/v86bios/pci.h
deleted file mode 100644
index 58ad52202e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/pci.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission. The authors makes no representations
- * about the suitability of this software for any purpose. It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-#include "v86bios.h"
-
-#ifndef V86_PCI_H
-#define V86_PCI_H
-
-typedef union {
- struct {
- unsigned int zero:2;
- unsigned int reg:6;
- unsigned int func:3;
- unsigned int dev:5;
- unsigned int bus:8;
- unsigned int reserved:7;
- unsigned int enable:1;
- } pci;
- CARD32 l;
-} PciSlot;
-
-typedef struct pciBusRec {
- CARD8 primary;
- CARD8 secondary;
- CARD32 bctl;
- PciSlot Slot;
- struct pciBusRec *next;
- struct pciBusRec *pBus;
-} PciBusRec, *PciBusPtr;
-
-typedef struct pciStructRec {
- CARD16 VendorID;
- CARD16 DeviceID;
- CARD8 Interface;
- CARD8 BaseClass;
- CARD8 SubClass;
- CARD32 RomBase;
- CARD32 bus;
- CARD8 dev;
- CARD8 func;
- CARD32 cmd_st;
- int active;
- PciSlot Slot;
- struct pciStructRec *next;
- PciBusPtr pBus;
-} PciStructRec , *PciStructPtr;
-
-
-extern PciStructPtr CurrentPci;
-extern PciStructPtr PciList;
-extern PciStructPtr BootBios;
-extern int pciMaxBus;
-
-extern CARD32 findPci(CARD16 slotBX);
-extern CARD16 pciSlotBX(PciStructPtr);
-PciStructPtr findPciDevice(CARD16 vendorID, CARD16 deviceID, char n);
-PciStructPtr findPciClass(CARD8 intf, CARD8 subClass, CARD16 class, char n);
-
-extern CARD8 PciRead8(int offset, CARD32 slot);
-extern CARD16 PciRead16(int offset, CARD32 slot);
-extern CARD32 PciRead32(int offset, CARD32 slot);
-
-extern void PciWrite8(int offset,CARD8 byte, CARD32 slot);
-extern void PciWrite16(int offset,CARD16 word, CARD32 slot);
-extern void PciWrite32(int offset,CARD32 lg, CARD32 slot);
-
-extern void scan_pci(void);
-extern void pciVideoDisable(void);
-extern void pciVideoRestore(void);
-extern void EnableCurrent(void);
-extern int mapPciRom(PciStructPtr pciP);
-extern int cfg1out(CARD16 addr, CARD32 val);
-extern int cfg1in(CARD16 addr, CARD32 *val);
-extern void list_pci(void);
-extern PciStructPtr findPciByIDs(int bus, int dev, int func);
-
-#define PCI_MODE2_ENABLE_REG 0xCF8
-#define PCI_MODE2_FORWARD_REG 0xCFA
-#define PCI_MODE1_ADDRESS_REG 0xCF8
-#define PCI_MODE1_DATA_REG 0xCFC
-#if defined(__alpha__) || defined(__sparc__)
-#define PCI_EN 0x00000000
-#else
-#define PCI_EN 0x80000000
-#endif
-#define MAX_DEV_PER_VENDOR_CFG1 32
-#define BRIDGE_CLASS(x) (x == 0x06)
-#define BRIDGE_PCI_CLASS(x) (x == 0x04)
-#define BRIDGE_HOST_CLASS(x) (x == 0x00)
-#define PCI_CLASS_PREHISTORIC 0x00
-#define PCI_SUBCLASS_PREHISTORIC_VGA 0x01
-#define PCI_CLASS_DISPLAY 0x03
-#define PCI_SUBCLASS_DISPLAY_VGA 0x00
-#define PCI_SUBCLASS_DISPLAY_XGA 0x01
-#define PCI_SUBCLASS_DISPLAY_MISC 0x80
-#define VIDEO_CLASS(b,s) \
- (((b) == PCI_CLASS_PREHISTORIC && (s) == PCI_SUBCLASS_PREHISTORIC_VGA) || \
- ((b) == PCI_CLASS_DISPLAY && (s) == PCI_SUBCLASS_DISPLAY_VGA) ||\
- ((b) == PCI_CLASS_DISPLAY && (s) == PCI_SUBCLASS_DISPLAY_XGA) ||\
- ((b) == PCI_CLASS_DISPLAY && (s) == PCI_SUBCLASS_DISPLAY_MISC))
-#define PCI_MULTIFUNC_DEV 0x80
-#define MAX_PCI_DEVICES 64
-#define PCI_MAXBUS 16
-#define PCI_IS_MEM 0x00000001
-#define MAX_PCI_ROM_SIZE (1024 * 1024 * 16)
-
-#define IS_MEM32(x) ((x & 0x7) == 0 && x != 0)
-#define IS_MEM64(x) ((x & 0x7) == 0x4)
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/v86.c b/board/MAI/bios_emulator/scitech/src/v86bios/v86.c
deleted file mode 100644
index 4deed044cb..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/v86.c
+++ /dev/null
@@ -1,562 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission. The authors makes no representations
- * about the suitability of this software for any purpose. It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "debug.h"
-#include <sys/vm86.h>
-#include <unistd.h>
-#include <errno.h>
-#include <asm/unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <signal.h>
-#include <setjmp.h>
-#include "v86bios.h"
-#include "AsmMacros.h"
-
-struct vm86_struct vm86s;
-
-static int vm86_GP_fault(void);
-static int vm86_do_int(int num);
-static void dump_code(void);
-static void dump_registers(void);
-static void stack_trace(void);
-static int vm86_rep(struct vm86_struct *ptr);
-
-#define CPU_REG(x) (vm86s.regs.##x)
-#define CPU_REG_LW(reg) (*((CARD16 *)&CPU_REG(reg)))
-#define CPU_REG_HW(reg) (*((CARD16 *)&CPU_REG(reg) + 1))
-#define CPU_REG_LB(reg) (*(CARD8 *)&CPU_REG(e##reg))
-#define SEG_ADR(type, seg, reg) type((CPU_REG_LW(seg) << 4) \
- + CPU_REG_LW(e##reg))
-#define DF (1 << 10)
-
-struct pio P;
-
-
-void
-setup_io(void)
-{
- if (!Config.PrintPort && !Config.IoStatistics) {
- P.inb = (CARD8(*)(CARD16))inb;
- P.inw = (CARD16(*)(CARD16))inw;
- P.inl = (CARD32(*)(CARD16))inl;
- P.outb = (void(*)(CARD16,CARD8))outb;
- P.outw = (void(*)(CARD16,CARD16))outw;
- P.outl = (void(*)(CARD16,CARD32))outl;
- } else {
- P.inb = p_inb;
- P.inw = p_inw;
- P.inl = p_inl;
- P.outb = p_outb;
- P.outw = p_outw;
- P.outl = p_outl;
- }
-}
-
-
-static void
-setup_vm86(unsigned long bios_start, i86biosRegsPtr regs)
-{
- CARD32 eip;
- CARD16 cs;
-
- vm86s.flags = VM86_SCREEN_BITMAP;
- vm86s.flags = 0;
- vm86s.screen_bitmap = 0;
- vm86s.cpu_type = CPU_586;
- memset(&vm86s.int_revectored, 0xff,sizeof(vm86s.int_revectored)) ;
- memset(&vm86s.int21_revectored, 0xff,sizeof(vm86s.int21_revectored)) ;
-
- eip = bios_start & 0xFFFF;
- cs = (bios_start & 0xFF0000) >> 4;
-
- CPU_REG(eax) = regs->ax;
- CPU_REG(ebx) = regs->bx;
- CPU_REG(ecx) = regs->cx;
- CPU_REG(edx) = regs->dx;
- CPU_REG(esi) = 0;
- CPU_REG(edi) = regs->di;
- CPU_REG(ebp) = 0;
- CPU_REG(eip) = eip;
- CPU_REG(cs) = cs;
- CPU_REG(esp) = 0x100;
- CPU_REG(ss) = 0x30; /* This is the standard pc bios stack */
- CPU_REG(es) = regs->es;
- CPU_REG(ds) = 0x40; /* standard pc ds */
- CPU_REG(fs) = 0;
- CPU_REG(gs) = 0;
- CPU_REG(eflags) |= (VIF_MASK | VIP_MASK);
-}
-
-void
-collect_bios_regs(i86biosRegsPtr regs)
-{
- regs->ax = CPU_REG(eax);
- regs->bx = CPU_REG(ebx);
- regs->cx = CPU_REG(ecx);
- regs->dx = CPU_REG(edx);
- regs->es = CPU_REG(es);
- regs->ds = CPU_REG(ds);
- regs->di = CPU_REG(edi);
- regs->si = CPU_REG(esi);
-}
-
-static int
-do_vm86(void)
-{
- int retval;
-
-#ifdef V86BIOS_DEBUG
- dump_registers();
-#endif
-/* retval = SYS_vm86old(&vm86s); */
-/* retval = syscall(SYS_vm86old,&vm86s); */
-
- retval = vm86_rep(&vm86s);
-
- switch (VM86_TYPE(retval)) {
- case VM86_UNKNOWN:
- if (!vm86_GP_fault()) return 0;
- break;
- case VM86_STI:
- fprintf(stderr,"vm86_sti :-((\n");
- stack_trace();
- dump_code();
- return 0;
- case VM86_INTx:
- if (!vm86_do_int(VM86_ARG(retval))) {
- fprintf(stderr,"\nUnknown vm86_int: %X\n\n",VM86_ARG(retval));
- dump_registers();
- return 0;
- }
- /* I'm not sure yet what to do if we can handle ints */
- break;
- case VM86_SIGNAL:
- fprintf(stderr,"received signal\n");
- return 0;
- default:
- fprintf(stderr,"unknown type(0x%x)=0x%x\n",
- VM86_ARG(retval),VM86_TYPE(retval));
- dump_registers();
- dump_code();
- stack_trace();
- return 0;
- }
-
- return 1;
-}
-
-static jmp_buf x86_esc;
-static void
-vmexit(int unused)
-{
- longjmp(x86_esc,1);
-}
-
-void
-do_x86(unsigned long bios_start, i86biosRegsPtr regs)
-{
- static void (*org_handler)(int);
-
- setup_vm86(bios_start, regs);
- if (setjmp(x86_esc) == 0) {
- org_handler = signal(2,vmexit);
- while(do_vm86()) {};
- signal(2,org_handler);
- collect_bios_regs(regs);
- } else {
- signal(2,org_handler);
- printf("interrupted at 0x%x\n",((CARD16)CPU_REG(cs)) << 4
- | (CARD16)CPU_REG(eip));
- }
-}
-
-/* get the linear address */
-#define LIN_PREF_SI ((pref_seg << 4) + CPU_REG_LW(esi))
-
-#define LWECX (prefix66 ^ prefix67 ? CPU_REG(ecx) : CPU_REG_LW(ecx))
-
-static int
-vm86_GP_fault(void)
-{
- unsigned char *csp, *lina;
- CARD32 org_eip;
- int pref_seg;
- int done,is_rep,prefix66,prefix67;
-
-
- csp = lina = SEG_ADR((unsigned char *), cs, ip);
-#ifdef V86BIOS_DEBUG
- printf("exception: \n");
- dump_code();
-#endif
-
- is_rep = 0;
- prefix66 = prefix67 = 0;
- pref_seg = -1;
-
- /* eat up prefixes */
- done = 0;
- do {
- switch (*(csp++)) {
- case 0x66: /* operand prefix */ prefix66=1; break;
- case 0x67: /* address prefix */ prefix67=1; break;
- case 0x2e: /* CS */ pref_seg=CPU_REG(cs); break;
- case 0x3e: /* DS */ pref_seg=CPU_REG(ds); break;
- case 0x26: /* ES */ pref_seg=CPU_REG(es); break;
- case 0x36: /* SS */ pref_seg=CPU_REG(ss); break;
- case 0x65: /* GS */ pref_seg=CPU_REG(gs); break;
- case 0x64: /* FS */ pref_seg=CPU_REG(fs); break;
- case 0xf2: /* repnz */
- case 0xf3: /* rep */ is_rep=1; break;
- default: done=1;
- }
- } while (!done);
- csp--; /* oops one too many */
- org_eip = CPU_REG(eip);
- CPU_REG_LW(eip) += (csp - lina);
-
- switch (*csp) {
-
- case 0x6c: /* insb */
- /* NOTE: ES can't be overwritten; prefixes 66,67 should use esi,edi,ecx
- * but is anyone using extended regs in real mode? */
- /* WARNING: no test for DI wrapping! */
- CPU_REG_LW(edi) += port_rep_inb(CPU_REG_LW(edx),
- SEG_ADR((CARD8 *),es,di),
- CPU_REG_LW(eflags)&DF,
- (is_rep? LWECX:1));
- if (is_rep) LWECX = 0;
- CPU_REG_LW(eip)++;
- break;
-
- case 0x6d: /* (rep) insw / insd */
- /* NOTE: ES can't be overwritten */
- /* WARNING: no test for _DI wrapping! */
- if (prefix66) {
- CPU_REG_LW(edi) += port_rep_inl(CPU_REG_LW(edx),
- SEG_ADR((CARD32 *),es,di),
- CPU_REG_LW(eflags)&DF,
- (is_rep? LWECX:1));
- }
- else {
- CPU_REG_LW(edi) += port_rep_inw(CPU_REG_LW(edx),
- SEG_ADR((CARD16 *),es,di),
- CPU_REG_LW(eflags)&DF,
- (is_rep? LWECX:1));
- }
- if (is_rep) LWECX = 0;
- CPU_REG_LW(eip)++;
- break;
-
- case 0x6e: /* (rep) outsb */
- if (pref_seg < 0) pref_seg = CPU_REG_LW(ds);
- /* WARNING: no test for _SI wrapping! */
- CPU_REG_LW(esi) += port_rep_outb(CPU_REG_LW(edx),(CARD8*)LIN_PREF_SI,
- CPU_REG_LW(eflags)&DF,
- (is_rep? LWECX:1));
- if (is_rep) LWECX = 0;
- CPU_REG_LW(eip)++;
- break;
-
- case 0x6f: /* (rep) outsw / outsd */
- if (pref_seg < 0) pref_seg = CPU_REG_LW(ds);
- /* WARNING: no test for _SI wrapping! */
- if (prefix66) {
- CPU_REG_LW(esi) += port_rep_outl(CPU_REG_LW(edx),
- (CARD32 *)LIN_PREF_SI,
- CPU_REG_LW(eflags)&DF,
- (is_rep? LWECX:1));
- }
- else {
- CPU_REG_LW(esi) += port_rep_outw(CPU_REG_LW(edx),
- (CARD16 *)LIN_PREF_SI,
- CPU_REG_LW(eflags)&DF,
- (is_rep? LWECX:1));
- }
- if (is_rep) LWECX = 0;
- CPU_REG_LW(eip)++;
- break;
-
- case 0xe5: /* inw xx, inl xx */
- if (prefix66) CPU_REG(eax) = P.inl((int) csp[1]);
- else CPU_REG_LW(eax) = P.inw((int) csp[1]);
- CPU_REG_LW(eip) += 2;
- break;
- case 0xe4: /* inb xx */
- CPU_REG_LW(eax) &= ~(CARD32)0xff;
- CPU_REG_LB(ax) |= P.inb((int) csp[1]);
- CPU_REG_LW(eip) += 2;
- break;
- case 0xed: /* inw dx, inl dx */
- if (prefix66) CPU_REG(eax) = P.inl(CPU_REG_LW(edx));
- else CPU_REG_LW(eax) = P.inw(CPU_REG_LW(edx));
- CPU_REG_LW(eip) += 1;
- break;
- case 0xec: /* inb dx */
- CPU_REG_LW(eax) &= ~(CARD32)0xff;
- CPU_REG_LB(ax) |= P.inb(CPU_REG_LW(edx));
- CPU_REG_LW(eip) += 1;
- break;
-
- case 0xe7: /* outw xx */
- if (prefix66) P.outl((int)csp[1], CPU_REG(eax));
- else P.outw((int)csp[1], CPU_REG_LW(eax));
- CPU_REG_LW(eip) += 2;
- break;
- case 0xe6: /* outb xx */
- P.outb((int) csp[1], CPU_REG_LB(ax));
- CPU_REG_LW(eip) += 2;
- break;
- case 0xef: /* outw dx */
- if (prefix66) P.outl(CPU_REG_LW(edx), CPU_REG(eax));
- else P.outw(CPU_REG_LW(edx), CPU_REG_LW(eax));
- CPU_REG_LW(eip) += 1;
- break;
- case 0xee: /* outb dx */
- P.outb(CPU_REG_LW(edx), CPU_REG_LB(ax));
- CPU_REG_LW(eip) += 1;
- break;
-
- case 0xf4:
-#ifdef V86BIOS_DEBUG
- printf("hlt at %p\n", lina);
-#endif
- return 0;
-
- case 0x0f:
- fprintf(stderr,"CPU 0x0f Trap at eip=0x%lx\n",CPU_REG(eip));
- goto op0ferr;
- break;
-
- case 0xf0: /* lock */
- default:
- fprintf(stderr,"unknown reason for exception\n");
- dump_registers();
- stack_trace();
- op0ferr:
- dump_code();
- fprintf(stderr,"cannot continue\n");
- return 0;
- } /* end of switch() */
- return 1;
-}
-
-static int
-vm86_do_int(int num)
-{
- int val;
- struct regs86 regs;
-
- i_printf("int 0x%x received: ax:0x%lx",num,CPU_REG(eax));
- if (Config.PrintIp)
- i_printf(" at: 0x%x\n",getIP());
- else
- i_printf("\n");
-
- /* try to run bios interrupt */
-
- /* if not installed fall back */
-#define COPY(x) regs.##x = CPU_REG(x)
-#define COPY_R(x) CPU_REG(x) = regs.##x
-
- COPY(eax);
- COPY(ebx);
- COPY(ecx);
- COPY(edx);
- COPY(esi);
- COPY(edi);
- COPY(ebp);
- COPY(eip);
- COPY(esp);
- COPY(cs);
- COPY(ss);
- COPY(ds);
- COPY(es);
- COPY(fs);
- COPY(gs);
- COPY(eflags);
-
- if (!(val = int_handler(num,&regs)))
- if (!(val = run_bios_int(num,&regs)))
- return val;
-
- COPY_R(eax);
- COPY_R(ebx);
- COPY_R(ecx);
- COPY_R(edx);
- COPY_R(esi);
- COPY_R(edi);
- COPY_R(ebp);
- COPY_R(eip);
- COPY_R(esp);
- COPY_R(cs);
- COPY_R(ss);
- COPY_R(ds);
- COPY_R(es);
- COPY_R(fs);
- COPY_R(gs);
- COPY_R(eflags);
-
- return val;
-#undef COPY
-#undef COPY_R
-}
-
-static void
-dump_code(void)
-{
- int i;
- unsigned char *lina = SEG_ADR((unsigned char *), cs, ip);
-
- fprintf(stderr,"code at 0x%8.8x: ",(CARD32)lina);
- for (i=0; i<0x10; i++)
- fprintf(stderr,"%2.2x ",*(lina + i));
- fprintf(stderr,"\n ");
- for (; i<0x20; i++)
- fprintf(stderr,"%2.2x ",*(lina + i));
- fprintf(stderr,"\n");
-}
-
-#define PRINT(x) fprintf(stderr,#x":%4.4x ",CPU_REG_LW(x))
-#define PRINT_FLAGS(x) fprintf(stderr,#x":%8.8x ",CPU_REG_LW(x))
-static void
-dump_registers(void)
-{
- PRINT(eip);
- PRINT(eax);
- PRINT(ebx);
- PRINT(ecx);
- PRINT(edx);
- PRINT(esi);
- PRINT(edi);
- PRINT(ebp);
- fprintf(stderr,"\n");
- PRINT(esp);
- PRINT(cs);
- PRINT(ss);
- PRINT(es);
- PRINT(ds);
- PRINT(fs);
- PRINT(gs);
- PRINT_FLAGS(eflags);
- fprintf(stderr,"\n");
-}
-
-static void
-stack_trace(void)
-{
- int i;
- unsigned char *stack = SEG_ADR((unsigned char *), ss, sp);
-
- fprintf(stderr,"stack at 0x%8.8lx:\n",(unsigned long)stack);
- for (i=0; i < 0x10; i++)
- fprintf(stderr,"%2.2x ",*(stack + i));
- fprintf(stderr,"\n");
-
-}
-
-static int
-vm86_rep(struct vm86_struct *ptr)
-{
-
- int __res;
-
- __asm__ __volatile__("int $0x80\n"
- :"=a" (__res):"a" ((int)113),
- "b" ((struct vm86_struct *)ptr));
-
- if ((__res) < 0) {
- errno = -__res;
- __res=-1;
- }
- else errno = 0;
- return __res;
-}
-
-#define pushw(base, ptr, val) \
-__asm__ __volatile__( \
- "decw %w0\n\t" \
- "movb %h2,(%1,%0)\n\t" \
- "decw %w0\n\t" \
- "movb %b2,(%1,%0)" \
- : "=r" (ptr) \
- : "r" (base), "q" (val), "0" (ptr))
-
-int
-run_bios_int(int num, struct regs86 *regs)
-{
- CARD16 *ssp;
- CARD32 sp;
- CARD32 eflags;
-
-#ifdef V86BIOS_DEBUG
- static int firsttime = 1;
-#endif
- /* check if bios vector is initialized */
- if (((CARD16*)0)[(num<<1)+1] == 0x0000) { /* SYS_BIOS_SEG ?*/
-#ifdef V86BIOS_DEBUG
- i_printf("card BIOS not loaded\n");
-#endif
- return 0;
- }
-
-#ifdef V86BIOS_DEBUG
- if (firsttime) {
- dprint(0,0x3D0);
- firsttime = 0;
- }
-#endif
-
- i_printf("calling card BIOS at: ");
- ssp = (CARD16*)(CPU_REG(ss)<<4);
- sp = (CARD32) CPU_REG_LW(esp);
-
- eflags = regs->eflags;
- eflags = ((eflags & VIF_MASK) != 0)
- ? (eflags | IF_MASK) : (eflags & ~(CARD32) IF_MASK);
- pushw(ssp, sp, eflags);
- pushw(ssp, sp, regs->cs);
- pushw(ssp, sp, (CARD16)regs->eip);
- regs->esp -= 6;
- regs->cs = ((CARD16 *) 0)[(num << 1) + 1];
- regs->eip = (regs->eip & 0xFFFF0000) | ((CARD16 *) 0)[num << 1];
- i_printf("0x%x:%lx\n",regs->cs,regs->eip);
-#ifdef V86BIOS_DEBUG
- dump_code();
-#endif
- regs->eflags = regs->eflags
- & ~(VIF_MASK | TF_MASK | IF_MASK | NT_MASK);
- return 1;
-}
-
-CARD32
-getIntVect(int num)
-{
- return ((CARD32*)0)[num];
-}
-
-CARD32
-getIP(void)
-{
- return (CPU_REG(cs) << 4) + CPU_REG(eip);
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/v86bios.c b/board/MAI/bios_emulator/scitech/src/v86bios/v86bios.c
deleted file mode 100644
index 101c1f26e6..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/v86bios.c
+++ /dev/null
@@ -1,933 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission. The authors makes no representations
- * about the suitability of this software for any purpose. It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-#define DELETE
-#include <unistd.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <sys/mman.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-#include <signal.h>
-#include <sys/stat.h>
-#include <readline/readline.h>
-#include <readline/history.h>
-#if defined(__alpha__) || defined (__ia64__)
-#include <sys/io.h>
-#elif defined(HAVE_SYS_PERM)
-#include <sys/perm.h>
-#endif
-#include "debug.h"
-#include "v86bios.h"
-#include "pci.h"
-#include "AsmMacros.h"
-
-#define SIZE 0x100000
-#define VRAM_START 0xA0000
-#define VRAM_SIZE 0x1FFFF
-#define V_BIOS_SIZE 0x1FFFF
-#define BIOS_START 0x7C00 /* default BIOS entry */
-#define BIOS_MEM 0x600
-
-/*CARD8 code[] = { 0xb8 , 0xf0 , 0xf0, 0xf4 }; */
-#define VB_X(x) (V_BIOS >> x) & 0xFF
-CARD8 code[] = { 6, 0x9a, 0x03, 0x00, 0x00, VB_X(12), 0xf4 };
-/*CARD8 code[] = { 0x9a, 0x03, 0x00, 0x00, VB_X(12), 0xb8, 0x03, 0x00, */
-/*0xcd, 0x10, 0xf4 }; */
-/*CARD8 code[] = { 0xb8 , 0xf0 , 0xf0 ,0xf4 }; */
-
-int ioperm_list[IOPERM_BITS] = {0,};
-
-static void sig_handler(int);
-static int map(void);
-static void unmap(void);
-static void bootBIOS(CARD16 ax);
-static int map_vram(void);
-static void unmap_vram(void);
-static int copy_vbios(memType v_base);
-static int copy_sys_bios(void);
-static void save_bios_to_file(void);
-static int setup_system_bios(void);
-static CARD32 setup_int_vect(void);
-#ifdef __ia32__
-static CARD32 setup_primary_int_vect(void);
-#endif
-static int chksum(CARD8 *start);
-static void setup_bios_regs(i86biosRegsPtr regs, CARD32 ax);
-static void print_regs(i86biosRegsPtr regs);
-static void print_usage(void);
-static void set_hlt(Bool set);
-static void set_ioperm(void);
-
-extern void yyparse();
-
-void loadCodeToMem(unsigned char *ptr, CARD8 *code);
-void dprint(unsigned long start, unsigned long size);
-
-static int vram_mapped = 0;
-static char* bios_var = NULL;
-static CARD8 save_msr;
-static CARD8 save_pos102;
-static CARD8 save_vse;
-static CARD8 save_46e8;
-static haltpoints hltp[20] = { {0, 0}, };
-
-console Console = {-1,-1};
-struct config Config;
-
-int main(int argc,char **argv)
-{
- int c;
-
- Config.PrintPort = PRINT_PORT;
- Config.IoStatistics = IO_STATISTICS;
- Config.PrintIrq = PRINT_IRQ;
- Config.PrintPci = PRINT_PCI;
- Config.ShowAllDev = SHOW_ALL_DEV;
- Config.PrintIp = PRINT_IP;
- Config.SaveBios = SAVE_BIOS;
- Config.Trace = TRACE;
- Config.ConfigActiveOnly = CONFIG_ACTIVE_ONLY; /* boot */
- Config.ConfigActiveDevice = CONFIG_ACTIVE_DEVICE; /* boot */
- Config.MapSysBios = MAP_SYS_BIOS;
- Config.Resort = RESORT; /* boot */
- Config.FixRom = FIX_ROM;
- Config.NoConsole = NO_CONSOLE;
- Config.BootOnly = FALSE;
- Config.Verbose = VERBOSE;
-
- opterr = 0;
- while ((c = getopt(argc,argv,"psicaPStAdbrfnv:?")) != EOF) {
- switch(c) {
- case 'p':
- Config.PrintPort = TRUE;
- break;
- case 's':
- Config.IoStatistics = TRUE;
- break;
- case 'i':
- Config.PrintIrq = TRUE;
- break;
- case 'c':
- Config.PrintPci = TRUE;
- break;
- case 'a':
- Config.ShowAllDev = TRUE;
- break;
- case 'P':
- Config.PrintIp = TRUE;
- break;
- case 'S':
- Config.SaveBios = TRUE;
- break;
- case 't':
- Config.Trace = TRUE;
- break;
- case 'A':
- Config.ConfigActiveOnly = TRUE;
- break;
- case 'd':
- Config.ConfigActiveDevice = TRUE;
- break;
- case 'b':
- Config.MapSysBios = TRUE;
- break;
- case 'r':
- Config.Resort = TRUE;
- break;
- case 'f':
- Config.FixRom = TRUE;
- break;
- case 'n':
- Config.NoConsole = TRUE;
- break;
- case 'v':
- Config.Verbose = strtol(optarg,NULL,0);
- break;
- case '?':
- print_usage();
- break;
- default:
- break;
- }
- }
-
-
- if (!map())
- exit(1);
-
- if (!setup_system_bios())
- exit(1);
-
- iopl(3);
-
- scan_pci();
-
- save_msr = inb(0x3CC);
- save_vse = inb(0x3C3);
- save_46e8 = inb(0x46e8);
- save_pos102 = inb(0x102);
-
- if (Config.BootOnly) {
-
- if (!CurrentPci && !Config.ConfigActiveDevice
- && !Config.ConfigActiveOnly) {
- iopl(0);
- unmap();
- exit (1);
- }
- call_boot(NULL);
- } else {
- using_history();
- yyparse();
- }
-
- unmap();
-
- pciVideoRestore();
-
- outb(0x102, save_pos102);
- outb(0x46e8, save_46e8);
- outb(0x3C3, save_vse);
- outb(0x3C2, save_msr);
-
- iopl(0);
-
- close_console(Console);
-
- exit(0);
-}
-
-
-void
-call_boot(struct device *dev)
-{
- int Active_is_Pci = 0;
- CARD32 vbios_base;
-
- CurrentPci = PciList;
- Console = open_console();
-
- set_ioperm();
-
-
- signal(2,sig_handler);
- signal(11,sig_handler);
-
- /* disable primary card */
- pciVideoRestore(); /* reset PCI state to see primary card */
- outb(0x3C2,~(CARD8)0x03 & save_msr);
- outb(0x3C3,~(CARD8)0x01 & save_vse);
- outb(0x46e8, ~(CARD8)0x08 & save_46e8);
- outb(0x102, ~(CARD8)0x01 & save_pos102);
-
- pciVideoDisable();
-
- while (CurrentPci) {
- CARD16 ax;
-
- if (CurrentPci->active) {
- Active_is_Pci = 1;
- if (!Config.ConfigActiveDevice && !dev) {
- CurrentPci = CurrentPci->next;
- continue;
- }
- } else if (Config.ConfigActiveOnly && !dev) {
- CurrentPci = CurrentPci->next;
- continue;
- }
- if (dev && ((dev->type != PCI)
- || (dev->type == PCI
- && (dev->loc.pci.dev != CurrentPci->dev
- || dev->loc.pci.bus != CurrentPci->bus
- || dev->loc.pci.func != CurrentPci->func)))) {
- CurrentPci = CurrentPci->next;
- continue;
- }
-
- EnableCurrent();
-
- if (CurrentPci->active) {
- outb(0x102, save_pos102);
- outb(0x46e8, save_46e8);
- outb(0x3C3, save_vse);
- outb(0x3C2, save_msr);
- }
-
- /* clear interrupt vectors */
-#ifdef __ia32__
- vbios_base = CurrentPci->active ? setup_primary_int_vect()
- : setup_int_vect();
-#else
- vbios_base = setup_int_vect();
-#endif
- ax = ((CARD16)(CurrentPci->bus) << 8)
- | (CurrentPci->dev << 3) | (CurrentPci->func & 0x7);
- if (Config.Verbose > 1) P_printf("ax: 0x%x\n",ax);
-
- BootBios = findPciByIDs(CurrentPci->bus,CurrentPci->dev,
- CurrentPci->func);
- if (!((mapPciRom(BootBios) && chksum((CARD8*)V_BIOS))
- || (CurrentPci->active && copy_vbios(vbios_base)))) {
- CurrentPci = CurrentPci->next;
- continue;
- }
- if (!map_vram()) {
- CurrentPci = CurrentPci->next;
- continue;
- }
- if (Config.SaveBios) save_bios_to_file();
- printf("initializing PCI bus: %i dev: %i func: %i\n",CurrentPci->bus,
- CurrentPci->dev,CurrentPci->func);
- bootBIOS(ax);
- unmap_vram();
-
- if (CurrentPci->active)
- close_console(Console);
-
- if (dev) return;
-
- CurrentPci = CurrentPci->next;
- }
-
- /* We have an ISA device - configure if requested */
- if (!Active_is_Pci /* no isa card in system! */
- && ((!dev && (Config.ConfigActiveDevice || Config.ConfigActiveOnly))
- || (dev && dev->type == ISA))) {
-
- pciVideoDisable();
-
- if (!dev || dev->type == ISA) {
- outb(0x102, save_pos102);
- outb(0x46e8, save_46e8);
- outb(0x3C3, save_vse);
- outb(0x3C2, save_msr);
-
-#ifdef __ia32__
- vbios_base = setup_primary_int_vect();
-#else
- vbios_base = setup_int_vect();
-#endif
- if (copy_vbios(vbios_base)) {
-
- if (Config.SaveBios) save_bios_to_file();
- if (map_vram()) {
- printf("initializing ISA bus\n");
- bootBIOS(0);
- }
- }
-
- unmap_vram();
- sleep(1);
- close_console(Console);
- }
- }
-
-
-}
-
-int
-map(void)
-{
- void* mem;
- mem = mmap(0, (size_t)SIZE,
- PROT_EXEC | PROT_READ | PROT_WRITE,
- MAP_FIXED | MAP_PRIVATE | MAP_ANON,
- -1, 0 );
- if (mem != 0) {
- perror("anonymous map");
- return (0);
- }
- memset(mem,0,SIZE);
-
- return (1);
-}
-
-static void
-unmap(void)
-{
- munmap(0,SIZE);
-}
-
-static void
-bootBIOS(CARD16 ax)
-{
- i86biosRegs bRegs;
-#ifdef V86BIOS_DEBUG
- printf("starting BIOS\n");
-#endif
- setup_io();
- setup_bios_regs(&bRegs, ax);
- loadCodeToMem((unsigned char *) BIOS_START, code);
- do_x86(BIOS_START,&bRegs);
-#ifdef V86BIOS_DEBUG
- printf("done\n");
-#endif
-}
-
-static int
-map_vram(void)
-{
- int mem_fd;
-
-#ifdef __ia64__
- if ((mem_fd = open(MEM_FILE,O_RDWR | O_SYNC))<0)
-#else
- if ((mem_fd = open(MEM_FILE,O_RDWR))<0)
-#endif
- {
- perror("opening memory");
- return 0;
- }
-
-#ifdef __alpha__
- if (!_bus_base()) sparse_shift = 7; /* Uh, oh, JENSEN... */
- if (!_bus_base_sparse()) sparse_shift = 0;
- if ((vram_map = mmap(0,(size_t) (VRAM_SIZE << sparse_shift),
- PROT_READ | PROT_WRITE,
- MAP_SHARED,
- mem_fd, (VRAM_START << sparse_shift)
- | _bus_base_sparse())) == (void *) -1)
-#else
- if (mmap((void *) VRAM_START, (size_t) VRAM_SIZE,
- PROT_EXEC | PROT_READ | PROT_WRITE, MAP_SHARED | MAP_FIXED,
- mem_fd, VRAM_START) == (void *) -1)
-#endif
- {
- perror("mmap error in map_hardware_ram (1)");
- close(mem_fd);
- return (0);
- }
- vram_mapped = 1;
- close(mem_fd);
- return (1);
-}
-
-static void
-unmap_vram(void)
-{
- if (!vram_mapped) return;
-
- munmap((void*)VRAM_START,VRAM_SIZE);
- vram_mapped = 0;
-}
-
-static int
-copy_vbios(memType v_base)
-{
- int mem_fd;
- unsigned char *tmp;
- int size;
-
- if ((mem_fd = open(MEM_FILE,O_RDONLY))<0) {
- perror("opening memory");
- return (0);
- }
-
- if (lseek(mem_fd,(off_t) v_base, SEEK_SET) != (off_t) v_base) {
- fprintf(stderr,"Cannot lseek\n");
- goto Error;
- }
- tmp = (unsigned char *)malloc(3);
- if (read(mem_fd, (char *)tmp, (size_t) 3) != (size_t) 3) {
- fprintf(stderr,"Cannot read\n");
- goto Error;
- }
- if (lseek(mem_fd,(off_t) v_base,SEEK_SET) != (off_t) v_base)
- goto Error;
-
- if (*tmp != 0x55 || *(tmp+1) != 0xAA ) {
- fprintf(stderr,"No bios found at: 0x%lx\n",v_base);
- goto Error;
- }
-#ifdef DEBUG
- dprint((unsigned long)tmp,0x100);
-#endif
- size = *(tmp+2) * 512;
-
- if (read(mem_fd, (char *)v_base, (size_t) size) != (size_t) size) {
- fprintf(stderr,"Cannot read\n");
- goto Error;
- }
- free(tmp);
- close(mem_fd);
- if (!chksum((CARD8*)v_base))
- return (0);
-
- return (1);
-
-Error:
- perror("v_bios");
- close(mem_fd);
- return (0);
-}
-
-static int
-copy_sys_bios(void)
-{
-#define SYS_BIOS 0xF0000
- int mem_fd;
-
- if ((mem_fd = open(MEM_FILE,O_RDONLY))<0) {
- perror("opening memory");
- return (0);
- }
-
- if (lseek(mem_fd,(off_t) SYS_BIOS,SEEK_SET) != (off_t) SYS_BIOS)
- goto Error;
- if (read(mem_fd, (char *)SYS_BIOS, (size_t) 0xFFFF) != (size_t) 0xFFFF)
- goto Error;
-
- close(mem_fd);
- return (1);
-
-Error:
- perror("sys_bios");
- close(mem_fd);
- return (0);
-}
-
-void
-loadCodeToMem(unsigned char *ptr, CARD8 code[])
-{
- int i;
- CARD8 val;
- int size = code[0];
-
- for ( i=1;i<=size;i++) {
- val = code[i];
- *ptr++ = val;
- }
- return;
-}
-
-void
-dprint(unsigned long start, unsigned long size)
-{
- int i,j;
- char *c = (char *)start;
-
- for (j = 0; j < (size >> 4); j++) {
- char *d = c;
- printf("\n0x%lx: ",(unsigned long)c);
- for (i = 0; i<16; i++)
- printf("%2.2x ",(unsigned char) (*(c++)));
- c = d;
- for (i = 0; i<16; i++) {
- printf("%c",((((CARD8)(*c)) > 32) && (((CARD8)(*c)) < 128)) ?
- (unsigned char) (*(c)): '.');
- c++;
- }
- }
- printf("\n");
-}
-
-static void
-save_bios_to_file(void)
-{
- static int num = 0;
- int size, count;
- char file_name[256];
- int fd;
-
- sprintf(file_name,"bios_%i.fil",num);
- if ((fd = open(file_name,O_WRONLY | O_CREAT | O_TRUNC,00644)) == -1)
- return;
- size = (*(unsigned char*)(V_BIOS + 2)) * 512;
-#ifdef V86BIOS_DEBUG
- dprint(V_BIOS,20);
-#endif
- if ((count = write(fd,(void *)(V_BIOS),size)) != size)
- fprintf(stderr,"only saved %i of %i bytes\n",size,count);
- num++;
-}
-
-static void
-sig_handler(int unused)
-{
- fflush(stdout);
- fflush(stderr);
-
- /* put system back in a save state */
- unmap_vram();
- pciVideoRestore();
- outb(0x102, save_pos102);
- outb(0x46e8, save_46e8);
- outb(0x3C3, save_vse);
- outb(0x3C2, save_msr);
-
- close_console(Console);
- iopl(0);
- unmap();
-
- exit(1);
-}
-
-/*
- * For initialization we just pass ax to the BIOS.
- * PCI BIOSes need this. All other register are set 0.
- */
-static void setup_bios_regs(i86biosRegsPtr regs, CARD32 ax)
-{
- regs->ax = ax;
- regs->bx = 0;
- regs->cx = 0;
- regs->dx = 0;
- regs->es = 0;
- regs->ds = 0x40; /* standard pc ds */
- regs->si = 0;
- regs->di = 0;
-}
-
-/*
- * here we are really paranoid about faking a "real"
- * BIOS. Most of this information was pulled from
- * dosem.
- */
-
-#ifdef __ia32__
-static CARD32
-setup_primary_int_vect(void)
-{
- int mem_fd;
- CARD32 vbase;
- void *map;
-
- if ((mem_fd = open(MEM_FILE,O_RDWR))<0)
- {
- perror("opening memory");
- return (0);
- }
-
- if ((map = mmap((void *) 0, (size_t) 0x2000,
- PROT_EXEC | PROT_READ | PROT_WRITE, MAP_SHARED,
- mem_fd, 0)) == (void *)-1) {
- perror("mmap error in map_hardware_ram (2)");
- close(mem_fd);
- return (0);
- }
-
- close(mem_fd);
- memcpy(0,map,BIOS_MEM);
- munmap(map,0x2000);
- /*
- * create a backup copy of the bios variables to write back the
- * modified values
- */
- if (!bios_var)
- bios_var = (char *)malloc(BIOS_MEM);
- memcpy(bios_var,0,BIOS_MEM);
-
- vbase = (*((CARD16*)(0x10 << 2) + 1)) << 4;
- if (Config.Verbose > 0) printf("vbase: 0x%x\n",vbase);
- return vbase;
-}
-#endif
-
-static CARD32
-setup_int_vect(void)
-{
- const CARD16 cs = 0x0;
- const CARD16 ip = 0x0;
- int i;
-
- /* let the int vects point to the SYS_BIOS seg */
- for (i=0; i<0x80; i++) {
- ((CARD16*)0)[i<<1] = ip;
- ((CARD16*)0)[(i<<1)+1] = cs;
- }
- /* video interrupts default location */
- ((CARD16*)0)[(0x42<<1)+1] = 0xf000;
- ((CARD16*)0)[0x42<<1] = 0xf065;
- ((CARD16*)0)[(0x10<<1)+1] = 0xf000;
- ((CARD16*)0)[0x10<<1] = 0xf065;
- /* video param table default location (int 1d) */
- ((CARD16*)0)[(0x1d<<1)+1] = 0xf000;
- ((CARD16*)0)[0x1d<<1] = 0xf0A4;
- /* font tables default location (int 1F) */
- ((CARD16*)0)[(0x1f<<1)+1] = 0xf000;
- ((CARD16*)0)[0x1f<<1] = 0xfa6e;
-
- /* int 11 default location */
- ((CARD16*)0)[(0x11<<1)+1] = 0xf000;
- ((CARD16*)0)[0x11<<1] = 0xf84d;
- /* int 12 default location */
- ((CARD16*)0)[(0x12<<1)+1] = 0xf000;
- ((CARD16*)0)[0x12<<1] = 0xf841;
- /* int 15 default location */
- ((CARD16*)0)[(0x15<<1)+1] = 0xf000;
- ((CARD16*)0)[0x15<<1] = 0xf859;
- /* int 1A default location */
- ((CARD16*)0)[(0x1a<<1)+1] = 0xf000;
- ((CARD16*)0)[0x1a<<1] = 0xff6e;
- /* int 05 default location */
- ((CARD16*)0)[(0x05<<1)+1] = 0xf000;
- ((CARD16*)0)[0x05<<1] = 0xff54;
- /* int 08 default location */
- ((CARD16*)0)[(0x8<<1)+1] = 0xf000;
- ((CARD16*)0)[0x8<<1] = 0xfea5;
- /* int 13 default location (fdd) */
- ((CARD16*)0)[(0x13<<1)+1] = 0xf000;
- ((CARD16*)0)[0x13<<1] = 0xec59;
- /* int 0E default location */
- ((CARD16*)0)[(0xe<<1)+1] = 0xf000;
- ((CARD16*)0)[0xe<<1] = 0xef57;
- /* int 17 default location */
- ((CARD16*)0)[(0x17<<1)+1] = 0xf000;
- ((CARD16*)0)[0x17<<1] = 0xefd2;
- /* fdd table default location (int 1e) */
- ((CARD16*)0)[(0x1e<<1)+1] = 0xf000;
- ((CARD16*)0)[0x1e<<1] = 0xefc7;
- return V_BIOS;
-}
-
-static int
-setup_system_bios(void)
-{
- char *date = "06/01/99";
- char *eisa_ident = "PCI/ISA";
-
- if (Config.MapSysBios) {
-
- if (!copy_sys_bios()) return 0;
- return 1;
-
- } else {
-
-/* memset((void *)0xF0000,0xf4,0xfff7); */
-
- /*
- * we trap the "industry standard entry points" to the BIOS
- * and all other locations by filling them with "hlt"
- * TODO: implement hlt-handler for these
- */
- memset((void *)0xF0000,0xf4,0x10000);
-
- /*
- * TODO: we should copy the fdd table (0xfec59-0xfec5b)
- * the video parameter table (0xf0ac-0xf0fb)
- * and the font tables (0xfa6e-0xfe6d)
- * from the original bios here
- */
-
- /* set bios date */
- strcpy((char *)0xFFFF5,date);
- /* set up eisa ident string */
- strcpy((char *)0xFFFD9,eisa_ident);
- /* write system model id for IBM-AT */
- ((char *)0)[0xFFFFE] = 0xfc;
-
- return 1;
- }
-
-}
-
-static void
-update_bios_vars(void)
-{
- int mem_fd;
- void *map;
- memType i;
-
-#ifdef __ia64__
- if ((mem_fd = open(MEM_FILE,O_RDWR | O_SYNC))<0)
-#else
- if ((mem_fd = open(MEM_FILE,O_RDWR))<0)
-#endif
- {
- perror("opening memory");
- return;
- }
-
- if ((map = mmap((void *) 0, (size_t) 0x2000,
- PROT_EXEC | PROT_READ | PROT_WRITE, MAP_SHARED,
- mem_fd, 0)) == (void *)-1) {
- perror("mmap error in map_hardware_ram (3)");
- close(mem_fd);
- return;
- }
-
- for (i = 0; i < BIOS_MEM; i++) {
- if (bios_var[i] != *(CARD8*)i)
- *((CARD8*)map + i) = *(CARD8*)i;
- }
-
- munmap(map,0x2000);
- close(mem_fd);
-}
-
-static int
-chksum(CARD8 *start)
-{
- CARD16 size;
- CARD8 val = 0;
- int i;
-
- size = *(start+2) * 512;
- for (i = 0; i<size; i++)
- val += *(start + i);
-
- if (!val)
- return 1;
-
- fprintf(stderr,"BIOS cksum wrong!\n");
- return 0;
-}
-
-void
-runINT(int num, i86biosRegsPtr Regs)
-{
- Bool isVideo = FALSE;
- CARD8 code_int[] = { 3, 0xcd, 0x00, 0xf4 };
-
- code_int[2] = (CARD8) num;
-
- if (num == 0x10)
- isVideo = TRUE;
-
- if (!setup_system_bios())
- return;
-
- if ((isVideo && (!CurrentPci || CurrentPci->active)) || !isVideo) {
- CARD32 vbios_base;
-
-#ifdef __ia32__
- if (!(vbios_base = setup_primary_int_vect()))
-#else
- if (!(vbios_base = setup_int_vect()))
-#endif
- return;
- if (!copy_vbios(vbios_base))
- return;
- }
-
- if (!map_vram())
- return;
-
-#ifdef V86BIOS_DEBUG
- printf("starting BIOS\n");
-#endif
- loadCodeToMem((unsigned char *) BIOS_START, code_int);
- setup_io();
- print_regs(Regs);
- set_ioperm();
- set_hlt(TRUE);
- do_x86(BIOS_START,Regs);
- set_hlt(FALSE);
- print_regs(Regs);
-
-#ifdef V86BIOS_DEBUG
- printf("done\n");
-#endif
-
- if ((isVideo && (!CurrentPci || CurrentPci->active)) || !isVideo)
- update_bios_vars();
-}
-
-static void
-print_regs(i86biosRegsPtr regs)
-{
- printf("ax=%x bx=%x cx=%x dx=%x ds=%x es=%x di=%x si=%x\n",
- (CARD16)regs->ax,(CARD16)regs->bx,(CARD16)regs->cx,(CARD16)regs->dx,
- (CARD16)regs->ds,(CARD16)regs->es,(CARD16)regs->di,
- (CARD16)regs->si);
-}
-
-static void
-print_usage(void)
-{
-}
-
-void
-add_hlt(unsigned long val)
-{
- int i;
-
- if (val < BIOS_MEM || (val > VRAM_START && val < (VRAM_START + VRAM_SIZE))
- || val >= SIZE) {
- printf("address out of range\n");
- return;
- }
-
- for (i=0; i<20; i++) {
- if (hltp[i].address == 0) {
- hltp[i].address = (void*)val;
- break;
- }
- }
- if (i == 20) printf("no more hltpoints available\n");
-}
-
-void
-del_hlt(int val)
-{
- if (val == 21) { /* delete all */
- int i;
- printf("clearing all hltpoints\n");
- for (i=0; i <20; i++)
- hltp[i].address = NULL;
- } else if (val >= 0 && val <20)
- hltp[val].address = NULL;
- else printf("hltpoint %i out of range: valid range 0-19\n",val);
-}
-
-void
-list_hlt()
-{
- int i;
- for (i=0; i<20; i++)
- if (hltp[i].address)
- printf("hltpoint[%i]: 0x%lx\n",i,(unsigned long)hltp[i].address);
-}
-
-static void
-set_hlt(Bool set)
-{
- int i;
- for (i=0; i<20; i++)
- if (hltp[i].address) {
- if (set) {
- hltp[i].orgval = *(CARD8*)hltp[i].address;
- *(CARD8*)hltp[i].address = 0xf4;
- } else
- *(CARD8*)hltp[i].address = hltp[i].orgval;
- }
-}
-
-static void
-set_ioperm(void)
-{
- int i, start;
-
- ioperm(0,IOPERM_BITS,0);
-
- for (i = 0; i < IOPERM_BITS;i++)
- if (ioperm_list[i]) {
- start = i;
- for (;i < IOPERM_BITS; i++) {
- if (!ioperm_list[i]) {
- ioperm(start,i - start, 1);
- break;
- }
- }
- }
-}
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/v86bios.h b/board/MAI/bios_emulator/scitech/src/v86bios/v86bios.h
deleted file mode 100644
index a8f3f8e649..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/v86bios.h
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission. The authors makes no representations
- * about the suitability of this software for any purpose. It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-#ifndef V86_BIOS_H
-#define V86_BIOS_H
-
-#if defined (__i386__) || defined (__i486__) || defined (__i586__) || defined (__i686__) || defined (__k6__)
-# ifndef __ia32__
-# define __ia32__
-# endif
-#endif
-
-#include <stdio.h>
-
-#define p_printf(f,a...) do {if (Config.PrintPort) lprintf(f,##a);} \
- while(0)
-#define i_printf(f,a...) do {if (Config.PrintIrq) lprintf(f,##a);} \
- while(0)
-#define P_printf(f,a...) do {if (Config.PrintPci) lprintf(f,##a);} \
- while(0)
-
-typedef unsigned char CARD8;
-typedef unsigned short CARD16;
-typedef unsigned int CARD32;
-#if defined (__alpha__) || defined (__ia64__)
-typedef unsigned long memType;
-#else
-typedef unsigned int memType;
-#endif
-
-typedef int Bool;
-
-#define FALSE 0
-#define TRUE 1
-
-struct config {
- Bool PrintPort;
- Bool IoStatistics;
- Bool PrintIrq;
- Bool PrintPci;
- Bool ShowAllDev;
- Bool PrintIp;
- Bool SaveBios;
- Bool Trace;
- Bool ConfigActiveOnly;
- Bool ConfigActiveDevice;
- Bool MapSysBios;
- Bool Resort;
- Bool FixRom;
- Bool NoConsole;
- Bool BootOnly;
- int Verbose;
-};
-
-struct pio {
- CARD8 (*inb)(CARD16);
- CARD16 (*inw)(CARD16);
- CARD32 (*inl)(CARD16);
- void (*outb)(CARD16,CARD8);
- void (*outw)(CARD16,CARD16);
- void (*outl)(CARD16,CARD32);
-};
-
-struct regs86 {
- long ebx;
- long ecx;
- long edx;
- long esi;
- long edi;
- long ebp;
- long eax;
- long eip;
- long esp;
- unsigned short cs;
- unsigned short ss;
- unsigned short es;
- unsigned short ds;
- unsigned short fs;
- unsigned short gs;
- long eflags;
-};
-
-typedef struct {
- CARD32 ax;
- CARD32 bx;
- CARD32 cx;
- CARD32 dx;
- CARD32 cs;
- CARD32 es;
- CARD32 ds;
- CARD32 si;
- CARD32 di;
-} i86biosRegs, *i86biosRegsPtr;
-
-typedef struct {
- int fd;
- int vt;
-} console;
-
-typedef struct {
- void* address;
- CARD8 orgval;
-} haltpoints;
-
-enum dev_type { NONE, ISA, PCI };
-struct device {
- Bool booted;
- enum dev_type type;
- union {
- int none;
- struct pci {
- int bus;
- int dev;
- int func;
- } pci;
- } loc;
-};
-
-extern struct device Device;
-
-#ifdef __alpha__
-unsigned long _bus_base(void);
-extern void* vram_map;
-extern int sparse_shift;
-#endif
-
-extern struct pio P;
-extern struct config Config;
-#define IOPERM_BITS 1024
-extern int ioperm_list[IOPERM_BITS];
-
-extern void setup_io(void);
-extern void do_x86(unsigned long bios_start,i86biosRegsPtr regs);
-extern int run_bios_int(int num, struct regs86 *regs);
-extern CARD32 getIntVect(int num);
-CARD32 getIP(void);
-
-extern void call_boot(struct device *dev);
-extern void runINT(int num,i86biosRegsPtr Regs);
-extern void add_hlt(unsigned long addr);
-extern void del_hlt(int addr);
-extern void list_hlt();
-
-extern int port_rep_inb(CARD16 port, CARD8 *base, int d_f, CARD32 count);
-extern int port_rep_inw(CARD16 port, CARD16 *base, int d_f, CARD32 count);
-extern int port_rep_inl(CARD16 port, CARD32 *base, int d_f, CARD32 count);
-extern int port_rep_outb(CARD16 port, CARD8 *base, int d_f, CARD32 count);
-extern int port_rep_outw(CARD16 port, CARD16 *base, int d_f, CARD32 count);
-extern int port_rep_outl(CARD16 port, CARD32 *base, int d_f, CARD32 count);
-extern CARD8 p_inb(CARD16 port);
-extern CARD16 p_inw(CARD16 port);
-extern CARD32 p_inl(CARD16 port);
-extern void p_outb(CARD16 port, CARD8 val);
-extern void p_outw(CARD16 port, CARD16 val);
-extern void p_outl(CARD16 port, CARD32 val);
-#ifdef __alpha__
-extern CARD8 a_inb(CARD16 port);
-extern CARD16 a_inw(CARD16 port);
-extern void a_outb(CARD16 port, CARD8 val);
-extern void a_outw(CARD16 port, CARD16 val);
-#endif
-#ifdef __alpha__
-CARD8 mem_rb(CARD32 addr);
-CARD16 mem_rw(CARD32 addr);
-CARD32 mem_rl(CARD32 addr);
-void mem_wb(CARD32 addr, CARD8 val);
-void mem_ww(CARD32 addr, CARD16 val);
-void mem_wl(CARD32 addr, CARD32 val);
-#endif
-extern void io_statistics(void);
-extern void clear_stat(void);
-extern int int_handler(int num, struct regs86 *regs);
-
-extern console open_console(void);
-extern void close_console(console);
-
-extern void dprint(unsigned long start, unsigned long size);
-
-extern Bool logging;
-extern Bool nostdout;
-extern char* logfile;
-extern void logon(void* ptr);
-extern void logoff();
-extern void lprintf(const char *f, ...);
-
-#define MEM_FILE "/dev/mem"
-#define DEFAULT_V_BIOS 0xc0000
-#ifndef V_BIOS
-#define V_BIOS DEFAULT_V_BIOS
-#endif
-
-#ifdef __alpha__
-#define NEED_PCI_IO
-#endif
-
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/working_cards b/board/MAI/bios_emulator/scitech/src/v86bios/working_cards
deleted file mode 100644
index 7753f2495d..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/working_cards
+++ /dev/null
@@ -1,7 +0,0 @@
-David Monro: Trident TGUI 9440
- Virge/VX (Diamond Stealth 3D 3400)
- Riva TNT (Diamond Viper V550) no vbios?
-Jarno Paananen <jpaana@s2.org>: Guillemot Maxigamer Xentor 32
- (NVIDIA TNT2 Ultra)
- Creative Graphics Blaster Exxtreme
- (Permedia 2)
diff --git a/board/MAI/bios_emulator/scitech/src/v86bios/x86emu.c b/board/MAI/bios_emulator/scitech/src/v86bios/x86emu.c
deleted file mode 100644
index b5c99d7a7f..0000000000
--- a/board/MAI/bios_emulator/scitech/src/v86bios/x86emu.c
+++ /dev/null
@@ -1,316 +0,0 @@
-/*
- * Copyright 1999 Egbert Eich
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of the authors not be used in
- * advertising or publicity pertaining to distribution of the software without
- * specific, written prior permission. The authors makes no representations
- * about the suitability of this software for any purpose. It is provided
- * "as is" without express or implied warranty.
- *
- * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-#include "debug.h"
-
-#define IF_MASK 0x00000200
-#define VIF_MASK 0x00080000 /* virtual interrupt flag */
-#define VIP_MASK 0x00100000 /* virtual interrupt pending */
-
-#include </usr/include/unistd.h>
-#include <errno.h>
-#include <asm/unistd.h>
-/*#include <syscall-list.h> */
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <stdarg.h>
-#ifdef __alpha__
-#include <sys/io.h>
-#endif
-#include <signal.h>
-#include <setjmp.h>
-#include "AsmMacros.h"
-#include "v86bios.h"
-# define DEBUG
-#include "x86emu.h"
-#undef DEBUG
-
-#define M _X86EMU_env
-#define CPU_REG(reg) M.x86.R_##reg
-
-struct pio P;
-
-void
-setup_io(void)
-{
- if (!Config.PrintPort && !Config.IoStatistics) {
-
-#if defined (__i386__)
- P.inb = (u8(*)(u16))inb;
- P.inw = (u16(*)(u16))inw;
- P.outb = (void(*)(u16,u8))outb;
- P.outw = (void(*)(u16,u16))outw;
-#else
- P.inb = p_inb;
- P.inw = p_inw;
- P.outb = p_outb;
- P.outw = p_outw;
-#endif
-#if defined (__i386__) && ! defined(NEED_PCI_IO)
- P.inl = (u32(*)(u16))inl;
- P.outl = (void(*)(u16,u32))outl;
-#else
- P.inl = p_inl;
- P.outl = p_outl;
-#endif
- } else {
- P.inb = p_inb;
- P.inw = p_inw;
- P.inl = p_inl;
- P.outb = p_outb;
- P.outw = p_outw;
- P.outl = p_outl;
- }
-}
-
-void
-x86emu_do_int(int num)
-{
- struct regs86 regs;
-
- i_printf("int 0x%x received: ax:0x%x",num,CPU_REG(AX));
- if (Config.PrintIp)
- i_printf(" at: 0x%x\n",getIP());
- else
- i_printf("\n");
-
- /* try to run bios interrupt */
-
- /* if not installed fall back */
-#define COPY(x,y) regs.y = M.x86.x
-#define COPY_R(x,y) M.x86.x = regs.y
-
- COPY(R_EAX,eax);
- COPY(R_EBX,ebx);
- COPY(R_ECX,ecx);
- COPY(R_EDX,edx);
- COPY(R_ESI,esi);
- COPY(R_EDI,edi);
- COPY(R_EBP,ebp);
- COPY(R_EIP,eip);
- COPY(R_ESP,esp);
- COPY(R_CS,cs);
- COPY(R_SS,ss);
- COPY(R_DS,ds);
- COPY(R_ES,es);
- COPY(R_FS,fs);
- COPY(R_GS,gs);
- COPY(R_EFLG,eflags);
-
- if (!(int_handler(num,&regs))) {
- if (!run_bios_int(num,&regs))
- goto unknown_int;
- else
- return;
- }
-
- COPY_R(R_EAX,eax);
- COPY_R(R_EBX,ebx);
- COPY_R(R_ECX,ecx);
- COPY_R(R_EDX,edx);
- COPY_R(R_ESI,esi);
- COPY_R(R_EDI,edi);
- COPY_R(R_EBP,ebp);
- COPY_R(R_EIP,eip);
- COPY_R(R_ESP,esp);
- COPY_R(R_CS,cs);
- COPY_R(R_SS,ss);
- COPY_R(R_DS,ds);
- COPY_R(R_ES,es);
- COPY_R(R_FS,fs);
- COPY_R(R_GS,gs);
- COPY_R(R_EFLG,eflags);
- return;
-
- unknown_int:
- fprintf(stderr,"\nUnknown vm86_int: %X\n\n",num);
- X86EMU_halt_sys();
- return;
-
-#undef COPY
-#undef COPY_R
-}
-
-void
-setup_x86emu(unsigned long bios_start, i86biosRegsPtr regs)
-{
- int i;
- CARD32 eip;
- CARD16 cs;
- X86EMU_intrFuncs intFuncs[256];
-
- X86EMU_pioFuncs pioFuncs = {
- (u8(*)(u16))P.inb,
- (u16(*)(u16))P.inw,
- (u32(*)(u16))P.inl,
- (void(*)(u16,u8))P.outb,
- (void(*)(u16,u16))P.outw,
- (void(*)(u16,u32))P.outl
- };
-#ifdef __alpha__
- X86EMU_memFuncs memFuncs = {
- (u8(*)(u32))mem_rb,
- (u16(*)(u32))mem_rw,
- (u32(*)(u32))mem_rl,
- (void(*)(u32,u8))mem_wb,
- (void(*)(u32,u16))mem_ww,
- (void(*)(u32,u32))mem_wl
- };
-#endif
- M.mem_base = 0;
- M.mem_size = 1024*1024 + 1024;
- /* M.x86.debug = DEBUG_DISASSEMBLE_F | DEBUG_TRACE_F | DEBUG_DECODE_F; */
- /* M.x86.debug |= DEBUG_DECODE_F | DEBUG_TRACE_F; */
-/*
- * For single step tracing compile x86emu with option -DDEBUG
- */
- M.x86.debug = 0;
- if (Config.PrintIp)
- M.x86.debug = DEBUG_SAVE_CS_IP;
-
- if (Config.Trace)
- X86EMU_trace_on();
-
- X86EMU_setupPioFuncs(&pioFuncs);
-#ifdef __alpha__
- X86EMU_setupMemFuncs(&memFuncs);
-#endif
- for (i=0;i<256;i++)
- intFuncs[i] = x86emu_do_int;
- X86EMU_setupIntrFuncs(intFuncs);
-
- eip = bios_start & 0xFFFF;
- cs = (bios_start & 0xFF0000) >> 4;
-
- CPU_REG(EAX) = regs->ax;
- CPU_REG(EBX) = regs->bx;
- CPU_REG(ECX) = regs->cx;
- CPU_REG(EDX) = regs->dx;
- CPU_REG(ESI) = regs->si;
- CPU_REG(EDI) = regs->di;
- CPU_REG(EBP) = 0;
- CPU_REG(EIP) = eip;
- CPU_REG(CS) = cs;
- CPU_REG(SP) = 0x100;
- CPU_REG(SS) = 0x30; /* This is the standard pc bios stack */
- CPU_REG(ES) = regs->es;
- CPU_REG(DS) = regs->ds;
- CPU_REG(FS) = 0;
- CPU_REG(GS) = 0;
- CPU_REG(EFLG) |= (VIF_MASK | VIP_MASK | IF_MASK | 0x2);
-}
-
-void
-collect_bios_regs(i86biosRegsPtr regs)
-{
- regs->ax = CPU_REG(EAX);
- regs->bx = CPU_REG(EBX);
- regs->cx = CPU_REG(ECX);
- regs->dx = CPU_REG(EDX);
- regs->es = CPU_REG(ES);
- regs->ds = CPU_REG(DS);
- regs->di = CPU_REG(EDI);
- regs->si = CPU_REG(ESI);
-}
-
-static void
-do_x86emu(void)
-{
- X86EMU_exec();
-}
-
-static jmp_buf x86_esc;
-static void
-vmexit(int unused)
-{
- longjmp(x86_esc,1);
-}
-
-void
-do_x86(unsigned long bios_start, i86biosRegsPtr regs)
-{
- static void (*org_handler)(int);
-
- setup_x86emu(bios_start,regs);
- if (setjmp(x86_esc) == 0) {
- org_handler = signal(2,vmexit);
- do_x86emu();
- signal(2,org_handler);
- collect_bios_regs(regs);
- } else {
- signal(2,org_handler);
- printf("interrupted at 0x%x\n",((CARD16)CPU_REG(CS)) << 4
- | (CARD16)CPU_REG(EIP));
- }
-}
-
-int
-run_bios_int(int num, struct regs86 *regs)
-{
-#ifdef V86BIOS_DEBUG
- static int firsttime = 1;
-#endif
- /* check if bios vector is initialized */
- if (((CARD16*)0)[(num<<1)+1] == 0x0000) { /* SYS_BIOS_SEG ?*/
-#ifdef V86BIOS_DEBUG
- i_printf("card BIOS not loaded\n");
-#endif
- return 0;
- }
-
-#ifdef V86BIOS_DEBUG
- if (firsttime) {
- dprint(0,0x3D0);
- firsttime = 0;
- }
-#endif
-
- i_printf("calling card BIOS at: ");
- i_printf("0x%x:%x\n",((CARD16 *) 0)[(num << 1) + 1],
- (CARD32)((CARD16 *) 0)[num << 1]);
- X86EMU_prepareForInt(num);
-
- return 1;
-}
-
-CARD32
-getIntVect(int num)
-{
- return ((CARD32*)0)[num];
-}
-#if 0
-void
-printk(const char *fmt, ...)
-{
- va_list argptr;
- va_start(argptr, fmt);
- vfprintf(stdout, fmt, argptr);
- fflush(stdout);
- va_end(argptr);
-}
-#endif
-
-CARD32
-getIP(void)
-{
- return (M.x86.saved_cs << 4) + M.x86.saved_ip;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/LICENSE b/board/MAI/bios_emulator/scitech/src/x86emu/LICENSE
deleted file mode 100644
index a3ede4a87d..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/LICENSE
+++ /dev/null
@@ -1,17 +0,0 @@
- License information
- -------------------
-
-The x86emu library is under a BSD style license, comaptible
-with the XFree86 and X licenses used by XFree86. The
-original x86emu libraries were under the GNU General Public
-License. Due to license incompatibilities between the GPL
-and the XFree86 license, the original authors of the code
-decided to allow a license change. If you have submitted
-code to the original x86emu project, and you don't agree
-with the license change, please contact us and let you
-know. Your code will be removed to comply with your wishes.
-
-If you have any questions about this, please send email to
-x86emu@linuxlabs.com or KendallB@scitechsoft.com for
-clarification.
-
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/debug.c b/board/MAI/bios_emulator/scitech/src/x86emu/debug.c
deleted file mode 100644
index 235e6ac146..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/debug.c
+++ /dev/null
@@ -1,443 +0,0 @@
-/****************************************************************************
-*
-* Realmode X86 Emulator Library
-*
-* Copyright (C) 1996-1999 SciTech Software, Inc.
-* Copyright (C) David Mosberger-Tang
-* Copyright (C) 1999 Egbert Eich
-*
-* ========================================================================
-*
-* Permission to use, copy, modify, distribute, and sell this software and
-* its documentation for any purpose is hereby granted without fee,
-* provided that the above copyright notice appear in all copies and that
-* both that copyright notice and this permission notice appear in
-* supporting documentation, and that the name of the authors not be used
-* in advertising or publicity pertaining to distribution of the software
-* without specific, written prior permission. The authors makes no
-* representations about the suitability of this software for any purpose.
-* It is provided "as is" without express or implied warranty.
-*
-* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-* Developer: Kendall Bennett
-*
-* Description: This file contains the code to handle debugging of the
-* emulator.
-*
-****************************************************************************/
-
-#include "x86emu/x86emui.h"
-#include <stdarg.h>
-#include <stdlib.h>
-
-/*----------------------------- Implementation ----------------------------*/
-
-#ifdef DEBUG
-
-static void print_encoded_bytes (u16 s, u16 o);
-static void print_decoded_instruction (void);
-static int parse_line (char *s, int *ps, int *n);
-
-/* should look something like debug's output. */
-void X86EMU_trace_regs (void)
-{
- if (DEBUG_TRACE()) {
- x86emu_dump_regs();
- }
- if (DEBUG_DECODE() && ! DEBUG_DECODE_NOPRINT()) {
- printk("%04x:%04x ",M.x86.saved_cs, M.x86.saved_ip);
- print_encoded_bytes( M.x86.saved_cs, M.x86.saved_ip);
- print_decoded_instruction();
- }
-}
-
-void X86EMU_trace_xregs (void)
-{
- if (DEBUG_TRACE()) {
- x86emu_dump_xregs();
- }
-}
-
-void x86emu_just_disassemble (void)
-{
- /*
- * This routine called if the flag DEBUG_DISASSEMBLE is set kind
- * of a hack!
- */
- printk("%04x:%04x ",M.x86.saved_cs, M.x86.saved_ip);
- print_encoded_bytes( M.x86.saved_cs, M.x86.saved_ip);
- print_decoded_instruction();
-}
-
-static void disassemble_forward (u16 seg, u16 off, int n)
-{
- X86EMU_sysEnv tregs;
- int i;
- u8 op1;
- /*
- * hack, hack, hack. What we do is use the exact machinery set up
- * for execution, except that now there is an additional state
- * flag associated with the "execution", and we are using a copy
- * of the register struct. All the major opcodes, once fully
- * decoded, have the following two steps: TRACE_REGS(r,m);
- * SINGLE_STEP(r,m); which disappear if DEBUG is not defined to
- * the preprocessor. The TRACE_REGS macro expands to:
- *
- * if (debug&DEBUG_DISASSEMBLE)
- * {just_disassemble(); goto EndOfInstruction;}
- * if (debug&DEBUG_TRACE) trace_regs(r,m);
- *
- * ...... and at the last line of the routine.
- *
- * EndOfInstruction: end_instr();
- *
- * Up to the point where TRACE_REG is expanded, NO modifications
- * are done to any register EXCEPT the IP register, for fetch and
- * decoding purposes.
- *
- * This was done for an entirely different reason, but makes a
- * nice way to get the system to help debug codes.
- */
- tregs = M;
- tregs.x86.R_IP = off;
- tregs.x86.R_CS = seg;
-
- /* reset the decoding buffers */
- tregs.x86.enc_str_pos = 0;
- tregs.x86.enc_pos = 0;
-
- /* turn on the "disassemble only, no execute" flag */
- tregs.x86.debug |= DEBUG_DISASSEMBLE_F;
-
- /* DUMP NEXT n instructions to screen in straight_line fashion */
- /*
- * This looks like the regular instruction fetch stream, except
- * that when this occurs, each fetched opcode, upon seeing the
- * DEBUG_DISASSEMBLE flag set, exits immediately after decoding
- * the instruction. XXX --- CHECK THAT MEM IS NOT AFFECTED!!!
- * Note the use of a copy of the register structure...
- */
- for (i=0; i<n; i++) {
- op1 = (*sys_rdb)(((u32)M.x86.R_CS<<4) + (M.x86.R_IP++));
- (x86emu_optab[op1])(op1);
- }
- /* end major hack mode. */
-}
-
-void x86emu_check_ip_access (void)
-{
- /* NULL as of now */
-}
-
-void x86emu_check_sp_access (void)
-{
-}
-
-void x86emu_check_mem_access (u32 dummy)
-{
- /* check bounds, etc */
-}
-
-void x86emu_check_data_access (uint dummy1, uint dummy2)
-{
- /* check bounds, etc */
-}
-
-void x86emu_inc_decoded_inst_len (int x)
-{
- M.x86.enc_pos += x;
-}
-
-void x86emu_decode_printf (char *x)
-{
- sprintf(M.x86.decoded_buf+M.x86.enc_str_pos,"%s",x);
- M.x86.enc_str_pos += strlen(x);
-}
-
-void x86emu_decode_printf2 (char *x, int y)
-{
- char temp[100];
- sprintf(temp,x,y);
- sprintf(M.x86.decoded_buf+M.x86.enc_str_pos,"%s",temp);
- M.x86.enc_str_pos += strlen(temp);
-}
-
-void x86emu_end_instr (void)
-{
- M.x86.enc_str_pos = 0;
- M.x86.enc_pos = 0;
-}
-
-static void print_encoded_bytes (u16 s, u16 o)
-{
- int i;
- char buf1[64];
- for (i=0; i< M.x86.enc_pos; i++) {
- sprintf(buf1+2*i,"%02x", fetch_data_byte_abs(s,o+i));
- }
- printk("%-20s",buf1);
-}
-
-static void print_decoded_instruction (void)
-{
- printk("%s", M.x86.decoded_buf);
-}
-
-void x86emu_print_int_vect (u16 iv)
-{
- u16 seg,off;
-
- if (iv > 256) return;
- seg = fetch_data_word_abs(0,iv*4);
- off = fetch_data_word_abs(0,iv*4+2);
- printk("%04x:%04x ", seg, off);
-}
-
-void X86EMU_dump_memory (u16 seg, u16 off, u32 amt)
-{
- u32 start = off & 0xfffffff0;
- u32 end = (off+16) & 0xfffffff0;
- u32 i;
- u32 current;
-
- current = start;
- while (end <= off + amt) {
- printk("%04x:%04x ", seg, start);
- for (i=start; i< off; i++)
- printk(" ");
- for ( ; i< end; i++)
- printk("%02x ", fetch_data_byte_abs(seg,i));
- printk("\n");
- start = end;
- end = start + 16;
- }
-}
-
-void x86emu_single_step (void)
-{
- char s[1024];
- int ps[10];
- int ntok;
- int cmd;
- int done;
- int segment;
- int offset;
- static int breakpoint;
- static int noDecode = 1;
-
- char *p;
-
- if (DEBUG_BREAK()) {
- if (M.x86.saved_ip != breakpoint) {
- return;
- } else {
- M.x86.debug &= ~DEBUG_DECODE_NOPRINT_F;
- M.x86.debug |= DEBUG_TRACE_F;
- M.x86.debug &= ~DEBUG_BREAK_F;
- print_decoded_instruction ();
- X86EMU_trace_regs();
- }
- }
-
- done=0;
- offset = M.x86.saved_ip;
- while (!done) {
- printk("-");
- /*p = fgets(s, 1023, stdin); */
- cons_gets(s);
- cmd = parse_line(s, ps, &ntok);
- switch(cmd) {
- case 'u':
- disassemble_forward(M.x86.saved_cs,(u16)offset,10);
- break;
- case 'd':
- if (ntok == 2) {
- segment = M.x86.saved_cs;
- offset = ps[1];
- X86EMU_dump_memory(segment,(u16)offset,16);
- offset += 16;
- } else if (ntok == 3) {
- segment = ps[1];
- offset = ps[2];
- X86EMU_dump_memory(segment,(u16)offset,16);
- offset += 16;
- } else {
- segment = M.x86.saved_cs;
- X86EMU_dump_memory(segment,(u16)offset,16);
- offset += 16;
- }
- break;
- case 'c':
- M.x86.debug ^= DEBUG_TRACECALL_F;
- break;
- case 's':
- M.x86.debug ^= DEBUG_SVC_F | DEBUG_SYS_F | DEBUG_SYSINT_F;
- break;
- case 'r':
- X86EMU_trace_regs();
- break;
- case 'x':
- X86EMU_trace_xregs();
- break;
- case 'g':
- if (ntok == 2) {
- breakpoint = ps[1];
- printk("breakpoint set to 0x%X\n", breakpoint);
- if (noDecode) {
- M.x86.debug |= DEBUG_DECODE_NOPRINT_F;
- } else {
- M.x86.debug &= ~DEBUG_DECODE_NOPRINT_F;
- }
- M.x86.debug &= ~DEBUG_TRACE_F;
- M.x86.debug |= DEBUG_BREAK_F;
- done = 1;
- }
- break;
- case 'q':
- M.x86.debug |= DEBUG_EXIT;
- return;
- case 'P':
- noDecode = (noDecode)?0:1;
- printk("Toggled decoding to %s\n",(noDecode)?"FALSE":"TRUE");
- break;
- case 't':
- case 0:
- done = 1;
- break;
- }
- }
-}
-
-int X86EMU_trace_on(void)
-{
- return M.x86.debug |= DEBUG_STEP_F | DEBUG_DECODE_F | DEBUG_TRACE_F;
-}
-
-int X86EMU_trace_off(void)
-{
- return M.x86.debug &= ~(DEBUG_STEP_F | DEBUG_DECODE_F | DEBUG_TRACE_F);
-}
-
-static int parse_line (char *s, int *ps, int *n)
-{
- int cmd;
-
- *n = 0;
- while(*s == ' ' || *s == '\t') s++;
- ps[*n] = *s;
- switch (*s) {
- case '\n':
- *n += 1;
- return 0;
- default:
- cmd = *s;
- *n += 1;
- }
-
- while (1) {
- while (*s != ' ' && *s != '\t' && *s != '\n') s++;
-
- if (*s == '\n')
- return cmd;
-
- while(*s == ' ' || *s == '\t') s++;
-
- ps[*n]=atoi(s);
- /*sscanf(s,"%x",&ps[*n]); */
- *n += 1;
- }
-}
-
-#endif /* DEBUG */
-
-void x86emu_dump_stack(void)
-{
- int i;
- printk("Stack: ");
- for (i = 0; i<16; i++)
- {
- u8 x = fetch_data_byte_abs(M.x86.R_SS, M.x86.R_SP + i);
- printk("%02x ", (int)x);
- }
- printk("\n");
-}
-
-void x86emu_dump_regs (void)
-{
- printk("\tAX=%04x ", M.x86.R_AX );
- printk("BX=%04x ", M.x86.R_BX );
- printk("CX=%04x ", M.x86.R_CX );
- printk("DX=%04x ", M.x86.R_DX );
- printk("SP=%04x ", M.x86.R_SP );
- printk("BP=%04x ", M.x86.R_BP );
- printk("SI=%04x ", M.x86.R_SI );
- printk("DI=%04x\n", M.x86.R_DI );
- printk("\tDS=%04x ", M.x86.R_DS );
- printk("ES=%04x ", M.x86.R_ES );
- printk("SS=%04x ", M.x86.R_SS );
- printk("CS=%04x ", M.x86.R_CS );
- printk("IP=%04x ", M.x86.R_IP );
- if (ACCESS_FLAG(F_OF)) printk("OV "); /* CHECKED... */
- else printk("NV ");
- if (ACCESS_FLAG(F_DF)) printk("DN ");
- else printk("UP ");
- if (ACCESS_FLAG(F_IF)) printk("EI ");
- else printk("DI ");
- if (ACCESS_FLAG(F_SF)) printk("NG ");
- else printk("PL ");
- if (ACCESS_FLAG(F_ZF)) printk("ZR ");
- else printk("NZ ");
- if (ACCESS_FLAG(F_AF)) printk("AC ");
- else printk("NA ");
- if (ACCESS_FLAG(F_PF)) printk("PE ");
- else printk("PO ");
- if (ACCESS_FLAG(F_CF)) printk("CY ");
- else printk("NC ");
- printk("\n");
- /*x86emu_dump_stack(); */
-}
-
-void x86emu_dump_xregs (void)
-{
- printk("\tEAX=%08x ", M.x86.R_EAX );
- printk("EBX=%08x ", M.x86.R_EBX );
- printk("ECX=%08x ", M.x86.R_ECX );
- printk("EDX=%08x \n", M.x86.R_EDX );
- printk("\tESP=%08x ", M.x86.R_ESP );
- printk("EBP=%08x ", M.x86.R_EBP );
- printk("ESI=%08x ", M.x86.R_ESI );
- printk("EDI=%08x\n", M.x86.R_EDI );
- printk("\tDS=%04x ", M.x86.R_DS );
- printk("ES=%04x ", M.x86.R_ES );
- printk("SS=%04x ", M.x86.R_SS );
- printk("CS=%04x ", M.x86.R_CS );
- printk("EIP=%08x\n\t", M.x86.R_EIP );
- if (ACCESS_FLAG(F_OF)) printk("OV "); /* CHECKED... */
- else printk("NV ");
- if (ACCESS_FLAG(F_DF)) printk("DN ");
- else printk("UP ");
- if (ACCESS_FLAG(F_IF)) printk("EI ");
- else printk("DI ");
- if (ACCESS_FLAG(F_SF)) printk("NG ");
- else printk("PL ");
- if (ACCESS_FLAG(F_ZF)) printk("ZR ");
- else printk("NZ ");
- if (ACCESS_FLAG(F_AF)) printk("AC ");
- else printk("NA ");
- if (ACCESS_FLAG(F_PF)) printk("PE ");
- else printk("PO ");
- if (ACCESS_FLAG(F_CF)) printk("CY ");
- else printk("NC ");
- printk("\n");
-}
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/decode.c b/board/MAI/bios_emulator/scitech/src/x86emu/decode.c
deleted file mode 100644
index 832b1f5f2e..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/decode.c
+++ /dev/null
@@ -1,970 +0,0 @@
-/****************************************************************************
-*
-* Realmode X86 Emulator Library
-*
-* Copyright (C) 1996-1999 SciTech Software, Inc.
-* Copyright (C) David Mosberger-Tang
-* Copyright (C) 1999 Egbert Eich
-*
-* ========================================================================
-*
-* Permission to use, copy, modify, distribute, and sell this software and
-* its documentation for any purpose is hereby granted without fee,
-* provided that the above copyright notice appear in all copies and that
-* both that copyright notice and this permission notice appear in
-* supporting documentation, and that the name of the authors not be used
-* in advertising or publicity pertaining to distribution of the software
-* without specific, written prior permission. The authors makes no
-* representations about the suitability of this software for any purpose.
-* It is provided "as is" without express or implied warranty.
-*
-* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-* Developer: Kendall Bennett
-*
-* Description: This file includes subroutines which are related to
-* instruction decoding and accessess of immediate data via IP. etc.
-*
-****************************************************************************/
-
-#include "x86emu/x86emui.h"
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-REMARKS:
-Handles any pending asychronous interrupts.
-****************************************************************************/
-static void x86emu_intr_handle(void)
-{
- u8 intno;
-
- if (M.x86.intr & INTR_SYNCH) {
- intno = M.x86.intno;
- if (_X86EMU_intrTab[intno]) {
- (*_X86EMU_intrTab[intno])(intno);
- } else {
- push_word((u16)M.x86.R_FLG);
- CLEAR_FLAG(F_IF);
- CLEAR_FLAG(F_TF);
- push_word(M.x86.R_CS);
- M.x86.R_CS = mem_access_word(intno * 4 + 2);
- push_word(M.x86.R_IP);
- M.x86.R_IP = mem_access_word(intno * 4);
- M.x86.intr = 0;
- }
- }
-}
-
-/****************************************************************************
-PARAMETERS:
-intrnum - Interrupt number to raise
-
-REMARKS:
-Raise the specified interrupt to be handled before the execution of the
-next instruction.
-****************************************************************************/
-void x86emu_intr_raise(
- u8 intrnum)
-{
- M.x86.intno = intrnum;
- M.x86.intr |= INTR_SYNCH;
-}
-
-/****************************************************************************
-REMARKS:
-Main execution loop for the emulator. We return from here when the system
-halts, which is normally caused by a stack fault when we return from the
-original real mode call.
-****************************************************************************/
-void X86EMU_exec(void)
-{
- u8 op1;
-
- M.x86.intr = 0;
- DB(x86emu_end_instr();)
-
- for (;;) {
- DB(if (CHECK_IP_FETCH()) x86emu_check_ip_access();)
- /* If debugging, save the IP and CS values. */
- SAVE_IP_CS(M.x86.R_CS, M.x86.R_IP);
- INC_DECODED_INST_LEN(1);
- if (M.x86.intr) {
- if (M.x86.intr & INTR_HALTED) {
- DB( printk("halted\n"); X86EMU_trace_regs();)
- return;
- }
- if (((M.x86.intr & INTR_SYNCH) && (M.x86.intno == 0 || M.x86.intno == 2)) ||
- !ACCESS_FLAG(F_IF)) {
- x86emu_intr_handle();
- }
- }
- op1 = (*sys_rdb)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP++));
- (*x86emu_optab[op1])(op1);
- if (M.x86.debug & DEBUG_EXIT) {
- M.x86.debug &= ~DEBUG_EXIT;
- return;
- }
- }
-}
-
-/****************************************************************************
-REMARKS:
-Halts the system by setting the halted system flag.
-****************************************************************************/
-void X86EMU_halt_sys(void)
-{
- M.x86.intr |= INTR_HALTED;
-}
-
-/****************************************************************************
-PARAMETERS:
-mod - Mod value from decoded byte
-regh - Reg h value from decoded byte
-regl - Reg l value from decoded byte
-
-REMARKS:
-Raise the specified interrupt to be handled before the execution of the
-next instruction.
-
-NOTE: Do not inline this function, as (*sys_rdb) is already inline!
-****************************************************************************/
-void fetch_decode_modrm(
- int *mod,
- int *regh,
- int *regl)
-{
- int fetched;
-
-DB( if (CHECK_IP_FETCH())
- x86emu_check_ip_access();)
- fetched = (*sys_rdb)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP++));
- INC_DECODED_INST_LEN(1);
- *mod = (fetched >> 6) & 0x03;
- *regh = (fetched >> 3) & 0x07;
- *regl = (fetched >> 0) & 0x07;
-}
-
-/****************************************************************************
-RETURNS:
-Immediate byte value read from instruction queue
-
-REMARKS:
-This function returns the immediate byte from the instruction queue, and
-moves the instruction pointer to the next value.
-
-NOTE: Do not inline this function, as (*sys_rdb) is already inline!
-****************************************************************************/
-u8 fetch_byte_imm(void)
-{
- u8 fetched;
-
-DB( if (CHECK_IP_FETCH())
- x86emu_check_ip_access();)
- fetched = (*sys_rdb)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP++));
- INC_DECODED_INST_LEN(1);
- return fetched;
-}
-
-/****************************************************************************
-RETURNS:
-Immediate word value read from instruction queue
-
-REMARKS:
-This function returns the immediate byte from the instruction queue, and
-moves the instruction pointer to the next value.
-
-NOTE: Do not inline this function, as (*sys_rdw) is already inline!
-****************************************************************************/
-u16 fetch_word_imm(void)
-{
- u16 fetched;
-
-DB( if (CHECK_IP_FETCH())
- x86emu_check_ip_access();)
- fetched = (*sys_rdw)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP));
- M.x86.R_IP += 2;
- INC_DECODED_INST_LEN(2);
- return fetched;
-}
-
-/****************************************************************************
-RETURNS:
-Immediate lone value read from instruction queue
-
-REMARKS:
-This function returns the immediate byte from the instruction queue, and
-moves the instruction pointer to the next value.
-
-NOTE: Do not inline this function, as (*sys_rdw) is already inline!
-****************************************************************************/
-u32 fetch_long_imm(void)
-{
- u32 fetched;
-
-DB( if (CHECK_IP_FETCH())
- x86emu_check_ip_access();)
- fetched = (*sys_rdl)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP));
- M.x86.R_IP += 4;
- INC_DECODED_INST_LEN(4);
- return fetched;
-}
-
-/****************************************************************************
-RETURNS:
-Value of the default data segment
-
-REMARKS:
-Inline function that returns the default data segment for the current
-instruction.
-
-On the x86 processor, the default segment is not always DS if there is
-no segment override. Address modes such as -3[BP] or 10[BP+SI] all refer to
-addresses relative to SS (ie: on the stack). So, at the minimum, all
-decodings of addressing modes would have to set/clear a bit describing
-whether the access is relative to DS or SS. That is the function of the
-cpu-state-varible M.x86.mode. There are several potential states:
-
- repe prefix seen (handled elsewhere)
- repne prefix seen (ditto)
-
- cs segment override
- ds segment override
- es segment override
- fs segment override
- gs segment override
- ss segment override
-
- ds/ss select (in absense of override)
-
-Each of the above 7 items are handled with a bit in the mode field.
-****************************************************************************/
-_INLINE u32 get_data_segment(void)
-{
-#define GET_SEGMENT(segment)
- switch (M.x86.mode & SYSMODE_SEGMASK) {
- case 0: /* default case: use ds register */
- case SYSMODE_SEGOVR_DS:
- case SYSMODE_SEGOVR_DS | SYSMODE_SEG_DS_SS:
- return M.x86.R_DS;
- case SYSMODE_SEG_DS_SS: /* non-overridden, use ss register */
- return M.x86.R_SS;
- case SYSMODE_SEGOVR_CS:
- case SYSMODE_SEGOVR_CS | SYSMODE_SEG_DS_SS:
- return M.x86.R_CS;
- case SYSMODE_SEGOVR_ES:
- case SYSMODE_SEGOVR_ES | SYSMODE_SEG_DS_SS:
- return M.x86.R_ES;
- case SYSMODE_SEGOVR_FS:
- case SYSMODE_SEGOVR_FS | SYSMODE_SEG_DS_SS:
- return M.x86.R_FS;
- case SYSMODE_SEGOVR_GS:
- case SYSMODE_SEGOVR_GS | SYSMODE_SEG_DS_SS:
- return M.x86.R_GS;
- case SYSMODE_SEGOVR_SS:
- case SYSMODE_SEGOVR_SS | SYSMODE_SEG_DS_SS:
- return M.x86.R_SS;
- default:
-#ifdef DEBUG
- printk("error: should not happen: multiple overrides.\n");
-#endif
- HALT_SYS();
- return 0;
- }
-}
-
-/****************************************************************************
-PARAMETERS:
-offset - Offset to load data from
-
-RETURNS:
-Byte value read from the absolute memory location.
-
-NOTE: Do not inline this function as (*sys_rdX) is already inline!
-****************************************************************************/
-u8 fetch_data_byte(
- uint offset)
-{
-#ifdef DEBUG
- if (CHECK_DATA_ACCESS())
- x86emu_check_data_access((u16)get_data_segment(), offset);
-#endif
- return (*sys_rdb)((get_data_segment() << 4) + offset);
-}
-
-/****************************************************************************
-PARAMETERS:
-offset - Offset to load data from
-
-RETURNS:
-Word value read from the absolute memory location.
-
-NOTE: Do not inline this function as (*sys_rdX) is already inline!
-****************************************************************************/
-u16 fetch_data_word(
- uint offset)
-{
-#ifdef DEBUG
- if (CHECK_DATA_ACCESS())
- x86emu_check_data_access((u16)get_data_segment(), offset);
-#endif
- return (*sys_rdw)((get_data_segment() << 4) + offset);
-}
-
-/****************************************************************************
-PARAMETERS:
-offset - Offset to load data from
-
-RETURNS:
-Long value read from the absolute memory location.
-
-NOTE: Do not inline this function as (*sys_rdX) is already inline!
-****************************************************************************/
-u32 fetch_data_long(
- uint offset)
-{
-#ifdef DEBUG
- if (CHECK_DATA_ACCESS())
- x86emu_check_data_access((u16)get_data_segment(), offset);
-#endif
- return (*sys_rdl)((get_data_segment() << 4) + offset);
-}
-
-/****************************************************************************
-PARAMETERS:
-segment - Segment to load data from
-offset - Offset to load data from
-
-RETURNS:
-Byte value read from the absolute memory location.
-
-NOTE: Do not inline this function as (*sys_rdX) is already inline!
-****************************************************************************/
-u8 fetch_data_byte_abs(
- uint segment,
- uint offset)
-{
-#ifdef DEBUG
- if (CHECK_DATA_ACCESS())
- x86emu_check_data_access(segment, offset);
-#endif
- return (*sys_rdb)(((u32)segment << 4) + offset);
-}
-
-/****************************************************************************
-PARAMETERS:
-segment - Segment to load data from
-offset - Offset to load data from
-
-RETURNS:
-Word value read from the absolute memory location.
-
-NOTE: Do not inline this function as (*sys_rdX) is already inline!
-****************************************************************************/
-u16 fetch_data_word_abs(
- uint segment,
- uint offset)
-{
-#ifdef DEBUG
- if (CHECK_DATA_ACCESS())
- x86emu_check_data_access(segment, offset);
-#endif
- return (*sys_rdw)(((u32)segment << 4) + offset);
-}
-
-/****************************************************************************
-PARAMETERS:
-segment - Segment to load data from
-offset - Offset to load data from
-
-RETURNS:
-Long value read from the absolute memory location.
-
-NOTE: Do not inline this function as (*sys_rdX) is already inline!
-****************************************************************************/
-u32 fetch_data_long_abs(
- uint segment,
- uint offset)
-{
-#ifdef DEBUG
- if (CHECK_DATA_ACCESS())
- x86emu_check_data_access(segment, offset);
-#endif
- return (*sys_rdl)(((u32)segment << 4) + offset);
-}
-
-/****************************************************************************
-PARAMETERS:
-offset - Offset to store data at
-val - Value to store
-
-REMARKS:
-Writes a word value to an segmented memory location. The segment used is
-the current 'default' segment, which may have been overridden.
-
-NOTE: Do not inline this function as (*sys_wrX) is already inline!
-****************************************************************************/
-void store_data_byte(
- uint offset,
- u8 val)
-{
-#ifdef DEBUG
- if (CHECK_DATA_ACCESS())
- x86emu_check_data_access((u16)get_data_segment(), offset);
-#endif
- (*sys_wrb)((get_data_segment() << 4) + offset, val);
-}
-
-/****************************************************************************
-PARAMETERS:
-offset - Offset to store data at
-val - Value to store
-
-REMARKS:
-Writes a word value to an segmented memory location. The segment used is
-the current 'default' segment, which may have been overridden.
-
-NOTE: Do not inline this function as (*sys_wrX) is already inline!
-****************************************************************************/
-void store_data_word(
- uint offset,
- u16 val)
-{
-#ifdef DEBUG
- if (CHECK_DATA_ACCESS())
- x86emu_check_data_access((u16)get_data_segment(), offset);
-#endif
- (*sys_wrw)((get_data_segment() << 4) + offset, val);
-}
-
-/****************************************************************************
-PARAMETERS:
-offset - Offset to store data at
-val - Value to store
-
-REMARKS:
-Writes a long value to an segmented memory location. The segment used is
-the current 'default' segment, which may have been overridden.
-
-NOTE: Do not inline this function as (*sys_wrX) is already inline!
-****************************************************************************/
-void store_data_long(
- uint offset,
- u32 val)
-{
-#ifdef DEBUG
- if (CHECK_DATA_ACCESS())
- x86emu_check_data_access((u16)get_data_segment(), offset);
-#endif
- (*sys_wrl)((get_data_segment() << 4) + offset, val);
-}
-
-/****************************************************************************
-PARAMETERS:
-segment - Segment to store data at
-offset - Offset to store data at
-val - Value to store
-
-REMARKS:
-Writes a byte value to an absolute memory location.
-
-NOTE: Do not inline this function as (*sys_wrX) is already inline!
-****************************************************************************/
-void store_data_byte_abs(
- uint segment,
- uint offset,
- u8 val)
-{
-#ifdef DEBUG
- if (CHECK_DATA_ACCESS())
- x86emu_check_data_access(segment, offset);
-#endif
- (*sys_wrb)(((u32)segment << 4) + offset, val);
-}
-
-/****************************************************************************
-PARAMETERS:
-segment - Segment to store data at
-offset - Offset to store data at
-val - Value to store
-
-REMARKS:
-Writes a word value to an absolute memory location.
-
-NOTE: Do not inline this function as (*sys_wrX) is already inline!
-****************************************************************************/
-void store_data_word_abs(
- uint segment,
- uint offset,
- u16 val)
-{
-#ifdef DEBUG
- if (CHECK_DATA_ACCESS())
- x86emu_check_data_access(segment, offset);
-#endif
- (*sys_wrw)(((u32)segment << 4) + offset, val);
-}
-
-/****************************************************************************
-PARAMETERS:
-segment - Segment to store data at
-offset - Offset to store data at
-val - Value to store
-
-REMARKS:
-Writes a long value to an absolute memory location.
-
-NOTE: Do not inline this function as (*sys_wrX) is already inline!
-****************************************************************************/
-void store_data_long_abs(
- uint segment,
- uint offset,
- u32 val)
-{
-#ifdef DEBUG
- if (CHECK_DATA_ACCESS())
- x86emu_check_data_access(segment, offset);
-#endif
- (*sys_wrl)(((u32)segment << 4) + offset, val);
-}
-
-/****************************************************************************
-PARAMETERS:
-reg - Register to decode
-
-RETURNS:
-Pointer to the appropriate register
-
-REMARKS:
-Return a pointer to the register given by the R/RM field of the
-modrm byte, for byte operands. Also enables the decoding of instructions.
-****************************************************************************/
-u8* decode_rm_byte_register(
- int reg)
-{
- switch (reg) {
- case 0:
- DECODE_PRINTF("AL");
- return &M.x86.R_AL;
- case 1:
- DECODE_PRINTF("CL");
- return &M.x86.R_CL;
- case 2:
- DECODE_PRINTF("DL");
- return &M.x86.R_DL;
- case 3:
- DECODE_PRINTF("BL");
- return &M.x86.R_BL;
- case 4:
- DECODE_PRINTF("AH");
- return &M.x86.R_AH;
- case 5:
- DECODE_PRINTF("CH");
- return &M.x86.R_CH;
- case 6:
- DECODE_PRINTF("DH");
- return &M.x86.R_DH;
- case 7:
- DECODE_PRINTF("BH");
- return &M.x86.R_BH;
- }
- HALT_SYS();
- return NULL; /* NOT REACHED OR REACHED ON ERROR */
-}
-
-/****************************************************************************
-PARAMETERS:
-reg - Register to decode
-
-RETURNS:
-Pointer to the appropriate register
-
-REMARKS:
-Return a pointer to the register given by the R/RM field of the
-modrm byte, for word operands. Also enables the decoding of instructions.
-****************************************************************************/
-u16* decode_rm_word_register(
- int reg)
-{
- switch (reg) {
- case 0:
- DECODE_PRINTF("AX");
- return &M.x86.R_AX;
- case 1:
- DECODE_PRINTF("CX");
- return &M.x86.R_CX;
- case 2:
- DECODE_PRINTF("DX");
- return &M.x86.R_DX;
- case 3:
- DECODE_PRINTF("BX");
- return &M.x86.R_BX;
- case 4:
- DECODE_PRINTF("SP");
- return &M.x86.R_SP;
- case 5:
- DECODE_PRINTF("BP");
- return &M.x86.R_BP;
- case 6:
- DECODE_PRINTF("SI");
- return &M.x86.R_SI;
- case 7:
- DECODE_PRINTF("DI");
- return &M.x86.R_DI;
- }
- HALT_SYS();
- return NULL; /* NOTREACHED OR REACHED ON ERROR */
-}
-
-/****************************************************************************
-PARAMETERS:
-reg - Register to decode
-
-RETURNS:
-Pointer to the appropriate register
-
-REMARKS:
-Return a pointer to the register given by the R/RM field of the
-modrm byte, for dword operands. Also enables the decoding of instructions.
-****************************************************************************/
-u32* decode_rm_long_register(
- int reg)
-{
- switch (reg) {
- case 0:
- DECODE_PRINTF("EAX");
- return &M.x86.R_EAX;
- case 1:
- DECODE_PRINTF("ECX");
- return &M.x86.R_ECX;
- case 2:
- DECODE_PRINTF("EDX");
- return &M.x86.R_EDX;
- case 3:
- DECODE_PRINTF("EBX");
- return &M.x86.R_EBX;
- case 4:
- DECODE_PRINTF("ESP");
- return &M.x86.R_ESP;
- case 5:
- DECODE_PRINTF("EBP");
- return &M.x86.R_EBP;
- case 6:
- DECODE_PRINTF("ESI");
- return &M.x86.R_ESI;
- case 7:
- DECODE_PRINTF("EDI");
- return &M.x86.R_EDI;
- }
- HALT_SYS();
- return NULL; /* NOTREACHED OR REACHED ON ERROR */
-}
-
-/****************************************************************************
-PARAMETERS:
-reg - Register to decode
-
-RETURNS:
-Pointer to the appropriate register
-
-REMARKS:
-Return a pointer to the register given by the R/RM field of the
-modrm byte, for word operands, modified from above for the weirdo
-special case of segreg operands. Also enables the decoding of instructions.
-****************************************************************************/
-u16* decode_rm_seg_register(
- int reg)
-{
- switch (reg) {
- case 0:
- DECODE_PRINTF("ES");
- return &M.x86.R_ES;
- case 1:
- DECODE_PRINTF("CS");
- return &M.x86.R_CS;
- case 2:
- DECODE_PRINTF("SS");
- return &M.x86.R_SS;
- case 3:
- DECODE_PRINTF("DS");
- return &M.x86.R_DS;
- case 4:
- case 5:
- case 6:
- case 7:
- DECODE_PRINTF("ILLEGAL SEGREG");
- break;
- }
- HALT_SYS();
- return NULL; /* NOT REACHED OR REACHED ON ERROR */
-}
-
-/****************************************************************************
-PARAMETERS:
-rm - RM value to decode
-
-RETURNS:
-Offset in memory for the address decoding
-
-REMARKS:
-Return the offset given by mod=00 addressing. Also enables the
-decoding of instructions.
-
-NOTE: The code which specifies the corresponding segment (ds vs ss)
- below in the case of [BP+..]. The assumption here is that at the
- point that this subroutine is called, the bit corresponding to
- SYSMODE_SEG_DS_SS will be zero. After every instruction
- except the segment override instructions, this bit (as well
- as any bits indicating segment overrides) will be clear. So
- if a SS access is needed, set this bit. Otherwise, DS access
- occurs (unless any of the segment override bits are set).
-****************************************************************************/
-unsigned decode_rm00_address(
- int rm)
-{
- unsigned offset;
-
- if (M.x86.mode & SYSMODE_PREFIX_ADDR)
- {
- switch (rm) {
- case 0:
- DECODE_PRINTF("[EAX]");
- return M.x86.R_EAX;
- case 1:
- DECODE_PRINTF("[ECX]");
- return M.x86.R_ECX;
- case 2:
- DECODE_PRINTF("[EDX]");
-/* M.x86.mode |= SYSMODE_SEG_DS_SS; */
- return M.x86.R_EDX;
- case 3:
- DECODE_PRINTF("[EBX]");
-/* M.x86.mode |= SYSMODE_SEG_DS_SS; */
- return M.x86.R_EBX;
- case 4:
- printk("Unsupported SIB encoding\n");
- HALT_SYS();
- return 0;
- case 5:
- offset = fetch_long_imm();
- DECODE_PRINTF2("[%08x]", offset);
- return offset;
- case 6:
- DECODE_PRINTF("[ESI]");
- return M.x86.R_ESI;
- case 7:
- DECODE_PRINTF("[EDI]");
- return M.x86.R_EDI;
- }
- }
- else
- {
- switch (rm) {
- case 0:
- DECODE_PRINTF("[BX+SI]");
- return M.x86.R_BX + M.x86.R_SI;
- case 1:
- DECODE_PRINTF("[BX+DI]");
- return M.x86.R_BX + M.x86.R_DI;
- case 2:
- DECODE_PRINTF("[BP+SI]");
- M.x86.mode |= SYSMODE_SEG_DS_SS;
- return M.x86.R_BP + M.x86.R_SI;
- case 3:
- DECODE_PRINTF("[BP+DI]");
- M.x86.mode |= SYSMODE_SEG_DS_SS;
- return M.x86.R_BP + M.x86.R_DI;
- case 4:
- DECODE_PRINTF("[SI]");
- return M.x86.R_SI;
- case 5:
- DECODE_PRINTF("[DI]");
- return M.x86.R_DI;
- case 6:
- offset = fetch_word_imm();
- DECODE_PRINTF2("[%04x]", offset);
- return offset;
- case 7:
- DECODE_PRINTF("[BX]");
- return M.x86.R_BX;
- }
- }
- HALT_SYS();
- return 0;
-}
-
-/****************************************************************************
-PARAMETERS:
-rm - RM value to decode
-
-RETURNS:
-Offset in memory for the address decoding
-
-REMARKS:
-Return the offset given by mod=01 addressing. Also enables the
-decoding of instructions.
-****************************************************************************/
-unsigned decode_rm01_address(
- int rm)
-{
- int displacement = (s8)fetch_byte_imm();
- if (M.x86.mode & SYSMODE_PREFIX_ADDR)
- {
- switch (rm)
- {
- case 0:
- DECODE_PRINTF2("%d[EAX}", displacement);
- return M.x86.R_EAX + displacement;
- case 1:
- DECODE_PRINTF2("%d[ECX]", displacement);
- return M.x86.R_ECX + displacement;
- case 2:
- DECODE_PRINTF2("%d[EDX]", displacement);
- return M.x86.R_EDX + displacement;
- case 3:
- DECODE_PRINTF2("%d[EBX]", displacement);
- return M.x86.R_EBX + displacement;
- case 4:
- printk("Unsupported SIB addressing mode\n");
- HALT_SYS();
- return 0;
- case 5:
- DECODE_PRINTF2("%d[EBP]", displacement);
- return M.x86.R_EBP + displacement;
- case 6:
- DECODE_PRINTF2("%d[ESI]", displacement);
- return M.x86.R_ESI + displacement;
- case 7:
- DECODE_PRINTF2("%d[EDI]", displacement);
- return M.x86.R_EDI + displacement;
- }
- }
- else
- {
- switch (rm) {
- case 0:
- DECODE_PRINTF2("%d[BX+SI]", displacement);
- return M.x86.R_BX + M.x86.R_SI + displacement;
- case 1:
- DECODE_PRINTF2("%d[BX+DI]", displacement);
- return M.x86.R_BX + M.x86.R_DI + displacement;
- case 2:
- DECODE_PRINTF2("%d[BP+SI]", displacement);
- M.x86.mode |= SYSMODE_SEG_DS_SS;
- return M.x86.R_BP + M.x86.R_SI + displacement;
- case 3:
- DECODE_PRINTF2("%d[BP+DI]", displacement);
- M.x86.mode |= SYSMODE_SEG_DS_SS;
- return M.x86.R_BP + M.x86.R_DI + displacement;
- case 4:
- DECODE_PRINTF2("%d[SI]", displacement);
- return M.x86.R_SI + displacement;
- case 5:
- DECODE_PRINTF2("%d[DI]", displacement);
- return M.x86.R_DI + displacement;
- case 6:
- DECODE_PRINTF2("%d[BP]", displacement);
- M.x86.mode |= SYSMODE_SEG_DS_SS;
- return M.x86.R_BP + displacement;
- case 7:
- DECODE_PRINTF2("%d[BX]", displacement);
- return M.x86.R_BX + displacement;
- }
- HALT_SYS();
- }
- return 0; /* SHOULD NOT HAPPEN */
-}
-
-/****************************************************************************
-PARAMETERS:
-rm - RM value to decode
-
-RETURNS:
-Offset in memory for the address decoding
-
-REMARKS:
-Return the offset given by mod=10 addressing. Also enables the
-decoding of instructions.
-****************************************************************************/
-unsigned decode_rm10_address(
- int rm)
-{
- if (M.x86.mode & SYSMODE_PREFIX_ADDR)
- {
- int displacement = (s32)fetch_long_imm();
- switch (rm)
- {
- case 0:
- DECODE_PRINTF2("%d[EAX}", displacement);
- return M.x86.R_EAX + displacement;
- case 1:
- DECODE_PRINTF2("%d[ECX]", displacement);
- return M.x86.R_ECX + displacement;
- case 2:
- DECODE_PRINTF2("%d[EDX]", displacement);
- return M.x86.R_EDX + displacement;
- case 3:
- DECODE_PRINTF2("%d[EBX]", displacement);
- return M.x86.R_EBX + displacement;
- case 4:
- printk("Unsupported SIB addressing mode\n");
- HALT_SYS();
- return 0;
- case 5:
- DECODE_PRINTF2("%d[EBP]", displacement);
- return M.x86.R_EBP + displacement;
- case 6:
- DECODE_PRINTF2("%d[ESI]", displacement);
- return M.x86.R_ESI + displacement;
- case 7:
- DECODE_PRINTF2("%d[EDI]", displacement);
- return M.x86.R_EDI + displacement;
- }
- }
- else
- {
- int displacement = (s16)fetch_word_imm();
- switch (rm) {
- case 0:
- DECODE_PRINTF2("%d[BX+SI]", displacement);
- return (M.x86.R_BX + M.x86.R_SI + displacement) & 0xffff;
- case 1:
- DECODE_PRINTF2("%d[BX+DI]", displacement);
- return (M.x86.R_BX + M.x86.R_DI + displacement) & 0xffff;
- case 2:
- DECODE_PRINTF2("%d[BP+SI]", displacement);
- M.x86.mode |= SYSMODE_SEG_DS_SS;
- return (M.x86.R_BP + M.x86.R_SI + displacement) & 0xffff;
- case 3:
- DECODE_PRINTF2("%d[BP+DI]", displacement);
- M.x86.mode |= SYSMODE_SEG_DS_SS;
- return (M.x86.R_BP + M.x86.R_DI + displacement) & 0xffff;
- case 4:
- DECODE_PRINTF2("%d[SI]", displacement);
- return (M.x86.R_SI + displacement) & 0xffff;
- case 5:
- DECODE_PRINTF2("%d[DI]", displacement);
- return (M.x86.R_DI + displacement) & 0xffff;
- case 6:
- DECODE_PRINTF2("%d[BP]", displacement);
- M.x86.mode |= SYSMODE_SEG_DS_SS;
- return (M.x86.R_BP + displacement) & 0xffff;
- case 7:
- DECODE_PRINTF2("%d[BX]", displacement);
- return (M.x86.R_BX + displacement) & 0xffff;
- }
- }
- HALT_SYS();
- return 0;
- /*NOTREACHED */
-}
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/fpu.c b/board/MAI/bios_emulator/scitech/src/x86emu/fpu.c
deleted file mode 100644
index 7f7c345b34..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/fpu.c
+++ /dev/null
@@ -1,945 +0,0 @@
-/****************************************************************************
-*
-* Realmode X86 Emulator Library
-*
-* Copyright (C) 1996-1999 SciTech Software, Inc.
-* Copyright (C) David Mosberger-Tang
-* Copyright (C) 1999 Egbert Eich
-*
-* ========================================================================
-*
-* Permission to use, copy, modify, distribute, and sell this software and
-* its documentation for any purpose is hereby granted without fee,
-* provided that the above copyright notice appear in all copies and that
-* both that copyright notice and this permission notice appear in
-* supporting documentation, and that the name of the authors not be used
-* in advertising or publicity pertaining to distribution of the software
-* without specific, written prior permission. The authors makes no
-* representations about the suitability of this software for any purpose.
-* It is provided "as is" without express or implied warranty.
-*
-* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-* Developer: Kendall Bennett
-*
-* Description: This file contains the code to implement the decoding and
-* emulation of the FPU instructions.
-*
-****************************************************************************/
-
-#include "x86emu/x86emui.h"
-
-/*----------------------------- Implementation ----------------------------*/
-
-/* opcode=0xd8 */
-void x86emuOp_esc_coprocess_d8(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("ESC D8\n");
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR_NO_TRACE();
-}
-
-#ifdef DEBUG
-
-static char *x86emu_fpu_op_d9_tab[] = {
- "FLD\tDWORD PTR ", "ESC_D9\t", "FST\tDWORD PTR ", "FSTP\tDWORD PTR ",
- "FLDENV\t", "FLDCW\t", "FSTENV\t", "FSTCW\t",
-
- "FLD\tDWORD PTR ", "ESC_D9\t", "FST\tDWORD PTR ", "FSTP\tDWORD PTR ",
- "FLDENV\t", "FLDCW\t", "FSTENV\t", "FSTCW\t",
-
- "FLD\tDWORD PTR ", "ESC_D9\t", "FST\tDWORD PTR ", "FSTP\tDWORD PTR ",
- "FLDENV\t", "FLDCW\t", "FSTENV\t", "FSTCW\t",
-};
-
-static char *x86emu_fpu_op_d9_tab1[] = {
- "FLD\t", "FLD\t", "FLD\t", "FLD\t",
- "FLD\t", "FLD\t", "FLD\t", "FLD\t",
-
- "FXCH\t", "FXCH\t", "FXCH\t", "FXCH\t",
- "FXCH\t", "FXCH\t", "FXCH\t", "FXCH\t",
-
- "FNOP", "ESC_D9", "ESC_D9", "ESC_D9",
- "ESC_D9", "ESC_D9", "ESC_D9", "ESC_D9",
-
- "FSTP\t", "FSTP\t", "FSTP\t", "FSTP\t",
- "FSTP\t", "FSTP\t", "FSTP\t", "FSTP\t",
-
- "FCHS", "FABS", "ESC_D9", "ESC_D9",
- "FTST", "FXAM", "ESC_D9", "ESC_D9",
-
- "FLD1", "FLDL2T", "FLDL2E", "FLDPI",
- "FLDLG2", "FLDLN2", "FLDZ", "ESC_D9",
-
- "F2XM1", "FYL2X", "FPTAN", "FPATAN",
- "FXTRACT", "ESC_D9", "FDECSTP", "FINCSTP",
-
- "FPREM", "FYL2XP1", "FSQRT", "ESC_D9",
- "FRNDINT", "FSCALE", "ESC_D9", "ESC_D9",
-};
-
-#endif /* DEBUG */
-
-/* opcode=0xd9 */
-void x86emuOp_esc_coprocess_d9(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
- u8 stkelem;
-
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
- if (mod != 3) {
- DECODE_PRINTINSTR32(x86emu_fpu_op_d9_tab, mod, rh, rl);
- } else {
- DECODE_PRINTF(x86emu_fpu_op_d9_tab1[(rh << 3) + rl]);
- }
-#endif
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- break;
- case 1:
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- break;
- case 2:
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- break;
- case 3: /* register to register */
- stkelem = (u8)rl;
- if (rh < 4) {
- DECODE_PRINTF2("ST(%d)\n", stkelem);
- } else {
- DECODE_PRINTF("\n");
- }
- break;
- }
-#ifdef X86EMU_FPU_PRESENT
- /* execute */
- switch (mod) {
- case 3:
- switch (rh) {
- case 0:
- x86emu_fpu_R_fld(X86EMU_FPU_STKTOP, stkelem);
- break;
- case 1:
- x86emu_fpu_R_fxch(X86EMU_FPU_STKTOP, stkelem);
- break;
- case 2:
- switch (rl) {
- case 0:
- x86emu_fpu_R_nop();
- break;
- default:
- x86emu_fpu_illegal();
- break;
- }
- case 3:
- x86emu_fpu_R_fstp(X86EMU_FPU_STKTOP, stkelem);
- break;
- case 4:
- switch (rl) {
- case 0:
- x86emu_fpu_R_fchs(X86EMU_FPU_STKTOP);
- break;
- case 1:
- x86emu_fpu_R_fabs(X86EMU_FPU_STKTOP);
- break;
- case 4:
- x86emu_fpu_R_ftst(X86EMU_FPU_STKTOP);
- break;
- case 5:
- x86emu_fpu_R_fxam(X86EMU_FPU_STKTOP);
- break;
- default:
- /* 2,3,6,7 */
- x86emu_fpu_illegal();
- break;
- }
- break;
-
- case 5:
- switch (rl) {
- case 0:
- x86emu_fpu_R_fld1(X86EMU_FPU_STKTOP);
- break;
- case 1:
- x86emu_fpu_R_fldl2t(X86EMU_FPU_STKTOP);
- break;
- case 2:
- x86emu_fpu_R_fldl2e(X86EMU_FPU_STKTOP);
- break;
- case 3:
- x86emu_fpu_R_fldpi(X86EMU_FPU_STKTOP);
- break;
- case 4:
- x86emu_fpu_R_fldlg2(X86EMU_FPU_STKTOP);
- break;
- case 5:
- x86emu_fpu_R_fldln2(X86EMU_FPU_STKTOP);
- break;
- case 6:
- x86emu_fpu_R_fldz(X86EMU_FPU_STKTOP);
- break;
- default:
- /* 7 */
- x86emu_fpu_illegal();
- break;
- }
- break;
-
- case 6:
- switch (rl) {
- case 0:
- x86emu_fpu_R_f2xm1(X86EMU_FPU_STKTOP);
- break;
- case 1:
- x86emu_fpu_R_fyl2x(X86EMU_FPU_STKTOP);
- break;
- case 2:
- x86emu_fpu_R_fptan(X86EMU_FPU_STKTOP);
- break;
- case 3:
- x86emu_fpu_R_fpatan(X86EMU_FPU_STKTOP);
- break;
- case 4:
- x86emu_fpu_R_fxtract(X86EMU_FPU_STKTOP);
- break;
- case 5:
- x86emu_fpu_illegal();
- break;
- case 6:
- x86emu_fpu_R_decstp();
- break;
- case 7:
- x86emu_fpu_R_incstp();
- break;
- }
- break;
-
- case 7:
- switch (rl) {
- case 0:
- x86emu_fpu_R_fprem(X86EMU_FPU_STKTOP);
- break;
- case 1:
- x86emu_fpu_R_fyl2xp1(X86EMU_FPU_STKTOP);
- break;
- case 2:
- x86emu_fpu_R_fsqrt(X86EMU_FPU_STKTOP);
- break;
- case 3:
- x86emu_fpu_illegal();
- break;
- case 4:
- x86emu_fpu_R_frndint(X86EMU_FPU_STKTOP);
- break;
- case 5:
- x86emu_fpu_R_fscale(X86EMU_FPU_STKTOP);
- break;
- case 6:
- case 7:
- default:
- x86emu_fpu_illegal();
- break;
- }
- break;
-
- default:
- switch (rh) {
- case 0:
- x86emu_fpu_M_fld(X86EMU_FPU_FLOAT, destoffset);
- break;
- case 1:
- x86emu_fpu_illegal();
- break;
- case 2:
- x86emu_fpu_M_fst(X86EMU_FPU_FLOAT, destoffset);
- break;
- case 3:
- x86emu_fpu_M_fstp(X86EMU_FPU_FLOAT, destoffset);
- break;
- case 4:
- x86emu_fpu_M_fldenv(X86EMU_FPU_WORD, destoffset);
- break;
- case 5:
- x86emu_fpu_M_fldcw(X86EMU_FPU_WORD, destoffset);
- break;
- case 6:
- x86emu_fpu_M_fstenv(X86EMU_FPU_WORD, destoffset);
- break;
- case 7:
- x86emu_fpu_M_fstcw(X86EMU_FPU_WORD, destoffset);
- break;
- }
- }
- }
-#endif /* X86EMU_FPU_PRESENT */
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR_NO_TRACE();
-}
-
-#ifdef DEBUG
-
-char *x86emu_fpu_op_da_tab[] = {
- "FIADD\tDWORD PTR ", "FIMUL\tDWORD PTR ", "FICOM\tDWORD PTR ",
- "FICOMP\tDWORD PTR ",
- "FISUB\tDWORD PTR ", "FISUBR\tDWORD PTR ", "FIDIV\tDWORD PTR ",
- "FIDIVR\tDWORD PTR ",
-
- "FIADD\tDWORD PTR ", "FIMUL\tDWORD PTR ", "FICOM\tDWORD PTR ",
- "FICOMP\tDWORD PTR ",
- "FISUB\tDWORD PTR ", "FISUBR\tDWORD PTR ", "FIDIV\tDWORD PTR ",
- "FIDIVR\tDWORD PTR ",
-
- "FIADD\tDWORD PTR ", "FIMUL\tDWORD PTR ", "FICOM\tDWORD PTR ",
- "FICOMP\tDWORD PTR ",
- "FISUB\tDWORD PTR ", "FISUBR\tDWORD PTR ", "FIDIV\tDWORD PTR ",
- "FIDIVR\tDWORD PTR ",
-
- "ESC_DA ", "ESC_DA ", "ESC_DA ", "ESC_DA ",
- "ESC_DA ", "ESC_DA ", "ESC_DA ", "ESC_DA ",
-};
-
-#endif /* DEBUG */
-
-/* opcode=0xda */
-void x86emuOp_esc_coprocess_da(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
- u8 stkelem;
-
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
- DECODE_PRINTINSTR32(x86emu_fpu_op_da_tab, mod, rh, rl);
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- break;
- case 1:
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- break;
- case 2:
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- break;
- case 3: /* register to register */
- stkelem = (u8)rl;
- DECODE_PRINTF2("\tST(%d),ST\n", stkelem);
- break;
- }
-#ifdef X86EMU_FPU_PRESENT
- switch (mod) {
- case 3:
- x86emu_fpu_illegal();
- break;
- default:
- switch (rh) {
- case 0:
- x86emu_fpu_M_iadd(X86EMU_FPU_SHORT, destoffset);
- break;
- case 1:
- x86emu_fpu_M_imul(X86EMU_FPU_SHORT, destoffset);
- break;
- case 2:
- x86emu_fpu_M_icom(X86EMU_FPU_SHORT, destoffset);
- break;
- case 3:
- x86emu_fpu_M_icomp(X86EMU_FPU_SHORT, destoffset);
- break;
- case 4:
- x86emu_fpu_M_isub(X86EMU_FPU_SHORT, destoffset);
- break;
- case 5:
- x86emu_fpu_M_isubr(X86EMU_FPU_SHORT, destoffset);
- break;
- case 6:
- x86emu_fpu_M_idiv(X86EMU_FPU_SHORT, destoffset);
- break;
- case 7:
- x86emu_fpu_M_idivr(X86EMU_FPU_SHORT, destoffset);
- break;
- }
- }
-#endif
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR_NO_TRACE();
-}
-
-#ifdef DEBUG
-
-char *x86emu_fpu_op_db_tab[] = {
- "FILD\tDWORD PTR ", "ESC_DB\t19", "FIST\tDWORD PTR ", "FISTP\tDWORD PTR ",
- "ESC_DB\t1C", "FLD\tTBYTE PTR ", "ESC_DB\t1E", "FSTP\tTBYTE PTR ",
-
- "FILD\tDWORD PTR ", "ESC_DB\t19", "FIST\tDWORD PTR ", "FISTP\tDWORD PTR ",
- "ESC_DB\t1C", "FLD\tTBYTE PTR ", "ESC_DB\t1E", "FSTP\tTBYTE PTR ",
-
- "FILD\tDWORD PTR ", "ESC_DB\t19", "FIST\tDWORD PTR ", "FISTP\tDWORD PTR ",
- "ESC_DB\t1C", "FLD\tTBYTE PTR ", "ESC_DB\t1E", "FSTP\tTBYTE PTR ",
-};
-
-#endif /* DEBUG */
-
-/* opcode=0xdb */
-void x86emuOp_esc_coprocess_db(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
-
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
- if (mod != 3) {
- DECODE_PRINTINSTR32(x86emu_fpu_op_db_tab, mod, rh, rl);
- } else if (rh == 4) { /* === 11 10 0 nnn */
- switch (rl) {
- case 0:
- DECODE_PRINTF("FENI\n");
- break;
- case 1:
- DECODE_PRINTF("FDISI\n");
- break;
- case 2:
- DECODE_PRINTF("FCLEX\n");
- break;
- case 3:
- DECODE_PRINTF("FINIT\n");
- break;
- }
- } else {
- DECODE_PRINTF2("ESC_DB %0x\n", (mod << 6) + (rh << 3) + (rl));
- }
-#endif /* DEBUG */
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- break;
- case 1:
- destoffset = decode_rm01_address(rl);
- break;
- case 2:
- destoffset = decode_rm10_address(rl);
- break;
- case 3: /* register to register */
- break;
- }
-#ifdef X86EMU_FPU_PRESENT
- /* execute */
- switch (mod) {
- case 3:
- switch (rh) {
- case 4:
- switch (rl) {
- case 0:
- x86emu_fpu_R_feni();
- break;
- case 1:
- x86emu_fpu_R_fdisi();
- break;
- case 2:
- x86emu_fpu_R_fclex();
- break;
- case 3:
- x86emu_fpu_R_finit();
- break;
- default:
- x86emu_fpu_illegal();
- break;
- }
- break;
- default:
- x86emu_fpu_illegal();
- break;
- }
- break;
- default:
- switch (rh) {
- case 0:
- x86emu_fpu_M_fild(X86EMU_FPU_SHORT, destoffset);
- break;
- case 1:
- x86emu_fpu_illegal();
- break;
- case 2:
- x86emu_fpu_M_fist(X86EMU_FPU_SHORT, destoffset);
- break;
- case 3:
- x86emu_fpu_M_fistp(X86EMU_FPU_SHORT, destoffset);
- break;
- case 4:
- x86emu_fpu_illegal();
- break;
- case 5:
- x86emu_fpu_M_fld(X86EMU_FPU_LDBL, destoffset);
- break;
- case 6:
- x86emu_fpu_illegal();
- break;
- case 7:
- x86emu_fpu_M_fstp(X86EMU_FPU_LDBL, destoffset);
- break;
- }
- }
-#endif
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR_NO_TRACE();
-}
-
-#ifdef DEBUG
-char *x86emu_fpu_op_dc_tab[] = {
- "FADD\tQWORD PTR ", "FMUL\tQWORD PTR ", "FCOM\tQWORD PTR ",
- "FCOMP\tQWORD PTR ",
- "FSUB\tQWORD PTR ", "FSUBR\tQWORD PTR ", "FDIV\tQWORD PTR ",
- "FDIVR\tQWORD PTR ",
-
- "FADD\tQWORD PTR ", "FMUL\tQWORD PTR ", "FCOM\tQWORD PTR ",
- "FCOMP\tQWORD PTR ",
- "FSUB\tQWORD PTR ", "FSUBR\tQWORD PTR ", "FDIV\tQWORD PTR ",
- "FDIVR\tQWORD PTR ",
-
- "FADD\tQWORD PTR ", "FMUL\tQWORD PTR ", "FCOM\tQWORD PTR ",
- "FCOMP\tQWORD PTR ",
- "FSUB\tQWORD PTR ", "FSUBR\tQWORD PTR ", "FDIV\tQWORD PTR ",
- "FDIVR\tQWORD PTR ",
-
- "FADD\t", "FMUL\t", "FCOM\t", "FCOMP\t",
- "FSUBR\t", "FSUB\t", "FDIVR\t", "FDIV\t",
-};
-#endif /* DEBUG */
-
-/* opcode=0xdc */
-void x86emuOp_esc_coprocess_dc(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
- u8 stkelem;
-
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
- DECODE_PRINTINSTR32(x86emu_fpu_op_dc_tab, mod, rh, rl);
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- break;
- case 1:
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- break;
- case 2:
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- break;
- case 3: /* register to register */
- stkelem = (u8)rl;
- DECODE_PRINTF2("\tST(%d),ST\n", stkelem);
- break;
- }
-#ifdef X86EMU_FPU_PRESENT
- /* execute */
- switch (mod) {
- case 3:
- switch (rh) {
- case 0:
- x86emu_fpu_R_fadd(stkelem, X86EMU_FPU_STKTOP);
- break;
- case 1:
- x86emu_fpu_R_fmul(stkelem, X86EMU_FPU_STKTOP);
- break;
- case 2:
- x86emu_fpu_R_fcom(stkelem, X86EMU_FPU_STKTOP);
- break;
- case 3:
- x86emu_fpu_R_fcomp(stkelem, X86EMU_FPU_STKTOP);
- break;
- case 4:
- x86emu_fpu_R_fsubr(stkelem, X86EMU_FPU_STKTOP);
- break;
- case 5:
- x86emu_fpu_R_fsub(stkelem, X86EMU_FPU_STKTOP);
- break;
- case 6:
- x86emu_fpu_R_fdivr(stkelem, X86EMU_FPU_STKTOP);
- break;
- case 7:
- x86emu_fpu_R_fdiv(stkelem, X86EMU_FPU_STKTOP);
- break;
- }
- break;
- default:
- switch (rh) {
- case 0:
- x86emu_fpu_M_fadd(X86EMU_FPU_DOUBLE, destoffset);
- break;
- case 1:
- x86emu_fpu_M_fmul(X86EMU_FPU_DOUBLE, destoffset);
- break;
- case 2:
- x86emu_fpu_M_fcom(X86EMU_FPU_DOUBLE, destoffset);
- break;
- case 3:
- x86emu_fpu_M_fcomp(X86EMU_FPU_DOUBLE, destoffset);
- break;
- case 4:
- x86emu_fpu_M_fsub(X86EMU_FPU_DOUBLE, destoffset);
- break;
- case 5:
- x86emu_fpu_M_fsubr(X86EMU_FPU_DOUBLE, destoffset);
- break;
- case 6:
- x86emu_fpu_M_fdiv(X86EMU_FPU_DOUBLE, destoffset);
- break;
- case 7:
- x86emu_fpu_M_fdivr(X86EMU_FPU_DOUBLE, destoffset);
- break;
- }
- }
-#endif
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR_NO_TRACE();
-}
-
-#ifdef DEBUG
-
-static char *x86emu_fpu_op_dd_tab[] = {
- "FLD\tQWORD PTR ", "ESC_DD\t29,", "FST\tQWORD PTR ", "FSTP\tQWORD PTR ",
- "FRSTOR\t", "ESC_DD\t2D,", "FSAVE\t", "FSTSW\t",
-
- "FLD\tQWORD PTR ", "ESC_DD\t29,", "FST\tQWORD PTR ", "FSTP\tQWORD PTR ",
- "FRSTOR\t", "ESC_DD\t2D,", "FSAVE\t", "FSTSW\t",
-
- "FLD\tQWORD PTR ", "ESC_DD\t29,", "FST\tQWORD PTR ", "FSTP\tQWORD PTR ",
- "FRSTOR\t", "ESC_DD\t2D,", "FSAVE\t", "FSTSW\t",
-
- "FFREE\t", "FXCH\t", "FST\t", "FSTP\t",
- "ESC_DD\t2C,", "ESC_DD\t2D,", "ESC_DD\t2E,", "ESC_DD\t2F,",
-};
-
-#endif /* DEBUG */
-
-/* opcode=0xdd */
-void x86emuOp_esc_coprocess_dd(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
- u8 stkelem;
-
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
- DECODE_PRINTINSTR32(x86emu_fpu_op_dd_tab, mod, rh, rl);
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- break;
- case 1:
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- break;
- case 2:
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- break;
- case 3: /* register to register */
- stkelem = (u8)rl;
- DECODE_PRINTF2("\tST(%d),ST\n", stkelem);
- break;
- }
-#ifdef X86EMU_FPU_PRESENT
- switch (mod) {
- case 3:
- switch (rh) {
- case 0:
- x86emu_fpu_R_ffree(stkelem);
- break;
- case 1:
- x86emu_fpu_R_fxch(stkelem);
- break;
- case 2:
- x86emu_fpu_R_fst(stkelem); /* register version */
- break;
- case 3:
- x86emu_fpu_R_fstp(stkelem); /* register version */
- break;
- default:
- x86emu_fpu_illegal();
- break;
- }
- break;
- default:
- switch (rh) {
- case 0:
- x86emu_fpu_M_fld(X86EMU_FPU_DOUBLE, destoffset);
- break;
- case 1:
- x86emu_fpu_illegal();
- break;
- case 2:
- x86emu_fpu_M_fst(X86EMU_FPU_DOUBLE, destoffset);
- break;
- case 3:
- x86emu_fpu_M_fstp(X86EMU_FPU_DOUBLE, destoffset);
- break;
- case 4:
- x86emu_fpu_M_frstor(X86EMU_FPU_WORD, destoffset);
- break;
- case 5:
- x86emu_fpu_illegal();
- break;
- case 6:
- x86emu_fpu_M_fsave(X86EMU_FPU_WORD, destoffset);
- break;
- case 7:
- x86emu_fpu_M_fstsw(X86EMU_FPU_WORD, destoffset);
- break;
- }
- }
-#endif
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR_NO_TRACE();
-}
-
-#ifdef DEBUG
-
-static char *x86emu_fpu_op_de_tab[] =
-{
- "FIADD\tWORD PTR ", "FIMUL\tWORD PTR ", "FICOM\tWORD PTR ",
- "FICOMP\tWORD PTR ",
- "FISUB\tWORD PTR ", "FISUBR\tWORD PTR ", "FIDIV\tWORD PTR ",
- "FIDIVR\tWORD PTR ",
-
- "FIADD\tWORD PTR ", "FIMUL\tWORD PTR ", "FICOM\tWORD PTR ",
- "FICOMP\tWORD PTR ",
- "FISUB\tWORD PTR ", "FISUBR\tWORD PTR ", "FIDIV\tWORD PTR ",
- "FIDIVR\tWORD PTR ",
-
- "FIADD\tWORD PTR ", "FIMUL\tWORD PTR ", "FICOM\tWORD PTR ",
- "FICOMP\tWORD PTR ",
- "FISUB\tWORD PTR ", "FISUBR\tWORD PTR ", "FIDIV\tWORD PTR ",
- "FIDIVR\tWORD PTR ",
-
- "FADDP\t", "FMULP\t", "FCOMP\t", "FCOMPP\t",
- "FSUBRP\t", "FSUBP\t", "FDIVRP\t", "FDIVP\t",
-};
-
-#endif /* DEBUG */
-
-/* opcode=0xde */
-void x86emuOp_esc_coprocess_de(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
- u8 stkelem;
-
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
- DECODE_PRINTINSTR32(x86emu_fpu_op_de_tab, mod, rh, rl);
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- break;
- case 1:
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- break;
- case 2:
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- break;
- case 3: /* register to register */
- stkelem = (u8)rl;
- DECODE_PRINTF2("\tST(%d),ST\n", stkelem);
- break;
- }
-#ifdef X86EMU_FPU_PRESENT
- switch (mod) {
- case 3:
- switch (rh) {
- case 0:
- x86emu_fpu_R_faddp(stkelem, X86EMU_FPU_STKTOP);
- break;
- case 1:
- x86emu_fpu_R_fmulp(stkelem, X86EMU_FPU_STKTOP);
- break;
- case 2:
- x86emu_fpu_R_fcomp(stkelem, X86EMU_FPU_STKTOP);
- break;
- case 3:
- if (stkelem == 1)
- x86emu_fpu_R_fcompp(stkelem, X86EMU_FPU_STKTOP);
- else
- x86emu_fpu_illegal();
- break;
- case 4:
- x86emu_fpu_R_fsubrp(stkelem, X86EMU_FPU_STKTOP);
- break;
- case 5:
- x86emu_fpu_R_fsubp(stkelem, X86EMU_FPU_STKTOP);
- break;
- case 6:
- x86emu_fpu_R_fdivrp(stkelem, X86EMU_FPU_STKTOP);
- break;
- case 7:
- x86emu_fpu_R_fdivp(stkelem, X86EMU_FPU_STKTOP);
- break;
- }
- break;
- default:
- switch (rh) {
- case 0:
- x86emu_fpu_M_fiadd(X86EMU_FPU_WORD, destoffset);
- break;
- case 1:
- x86emu_fpu_M_fimul(X86EMU_FPU_WORD, destoffset);
- break;
- case 2:
- x86emu_fpu_M_ficom(X86EMU_FPU_WORD, destoffset);
- break;
- case 3:
- x86emu_fpu_M_ficomp(X86EMU_FPU_WORD, destoffset);
- break;
- case 4:
- x86emu_fpu_M_fisub(X86EMU_FPU_WORD, destoffset);
- break;
- case 5:
- x86emu_fpu_M_fisubr(X86EMU_FPU_WORD, destoffset);
- break;
- case 6:
- x86emu_fpu_M_fidiv(X86EMU_FPU_WORD, destoffset);
- break;
- case 7:
- x86emu_fpu_M_fidivr(X86EMU_FPU_WORD, destoffset);
- break;
- }
- }
-#endif
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR_NO_TRACE();
-}
-
-#ifdef DEBUG
-
-static char *x86emu_fpu_op_df_tab[] = {
- /* mod == 00 */
- "FILD\tWORD PTR ", "ESC_DF\t39\n", "FIST\tWORD PTR ", "FISTP\tWORD PTR ",
- "FBLD\tTBYTE PTR ", "FILD\tQWORD PTR ", "FBSTP\tTBYTE PTR ",
- "FISTP\tQWORD PTR ",
-
- /* mod == 01 */
- "FILD\tWORD PTR ", "ESC_DF\t39 ", "FIST\tWORD PTR ", "FISTP\tWORD PTR ",
- "FBLD\tTBYTE PTR ", "FILD\tQWORD PTR ", "FBSTP\tTBYTE PTR ",
- "FISTP\tQWORD PTR ",
-
- /* mod == 10 */
- "FILD\tWORD PTR ", "ESC_DF\t39 ", "FIST\tWORD PTR ", "FISTP\tWORD PTR ",
- "FBLD\tTBYTE PTR ", "FILD\tQWORD PTR ", "FBSTP\tTBYTE PTR ",
- "FISTP\tQWORD PTR ",
-
- /* mod == 11 */
- "FFREE\t", "FXCH\t", "FST\t", "FSTP\t",
- "ESC_DF\t3C,", "ESC_DF\t3D,", "ESC_DF\t3E,", "ESC_DF\t3F,"
-};
-
-#endif /* DEBUG */
-
-/* opcode=0xdf */
-void x86emuOp_esc_coprocess_df(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
- u8 stkelem;
-
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
- DECODE_PRINTINSTR32(x86emu_fpu_op_df_tab, mod, rh, rl);
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- break;
- case 1:
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- break;
- case 2:
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- break;
- case 3: /* register to register */
- stkelem = (u8)rl;
- DECODE_PRINTF2("\tST(%d)\n", stkelem);
- break;
- }
-#ifdef X86EMU_FPU_PRESENT
- switch (mod) {
- case 3:
- switch (rh) {
- case 0:
- x86emu_fpu_R_ffree(stkelem);
- break;
- case 1:
- x86emu_fpu_R_fxch(stkelem);
- break;
- case 2:
- x86emu_fpu_R_fst(stkelem); /* register version */
- break;
- case 3:
- x86emu_fpu_R_fstp(stkelem); /* register version */
- break;
- default:
- x86emu_fpu_illegal();
- break;
- }
- break;
- default:
- switch (rh) {
- case 0:
- x86emu_fpu_M_fild(X86EMU_FPU_WORD, destoffset);
- break;
- case 1:
- x86emu_fpu_illegal();
- break;
- case 2:
- x86emu_fpu_M_fist(X86EMU_FPU_WORD, destoffset);
- break;
- case 3:
- x86emu_fpu_M_fistp(X86EMU_FPU_WORD, destoffset);
- break;
- case 4:
- x86emu_fpu_M_fbld(X86EMU_FPU_BSD, destoffset);
- break;
- case 5:
- x86emu_fpu_M_fild(X86EMU_FPU_LONG, destoffset);
- break;
- case 6:
- x86emu_fpu_M_fbstp(X86EMU_FPU_BSD, destoffset);
- break;
- case 7:
- x86emu_fpu_M_fistp(X86EMU_FPU_LONG, destoffset);
- break;
- }
- }
-#endif
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR_NO_TRACE();
-}
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/makefile b/board/MAI/bios_emulator/scitech/src/x86emu/makefile
deleted file mode 100644
index 8ce2e9e848..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/makefile
+++ /dev/null
@@ -1,63 +0,0 @@
-#############################################################################
-#
-# Realmode X86 Emulator Library
-#
-# Copyright (C) 1996-1999 SciTech Software, Inc.
-#
-# ========================================================================
-#
-# Permission to use, copy, modify, distribute, and sell this software and
-# its documentation for any purpose is hereby granted without fee,
-# provided that the above copyright notice appear in all copies and that
-# both that copyright notice and this permission notice appear in
-# supporting documentation, and that the name of the authors not be used
-# in advertising or publicity pertaining to distribution of the software
-# without specific, written prior permission. The authors makes no
-# representations about the suitability of this software for any purpose.
-# It is provided "as is" without express or implied warranty.
-#
-# THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-# INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-# EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-# USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-# OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
-#
-# ========================================================================
-#
-# Descripton: Generic makefile for the x86emu library. Requires
-# the SciTech Software makefile definitions package to be
-# installed, which uses the DMAKE make program.
-#
-#############################################################################
-
-.IMPORT .IGNORE: DEBUG
-
-#----------------------------------------------------------------------------
-# Define the lists of object files
-#----------------------------------------------------------------------------
-
-OBJECTS = sys$O decode$O ops$O ops2$O prim_ops$O fpu$O debug$O
-CFLAGS += -DSCITECH
-.IF $(DEBUG)
-CFLAGS += -DDEBUG
-.ENDIF
-LIBCLEAN = *.dll *.lib *.a
-LIBFILE = $(LP)x86emu$L
-
-#----------------------------------------------------------------------------
-# Sample test programs
-#----------------------------------------------------------------------------
-
-all: $(LIBFILE)
-
-validate$E: validate$O $(LIBFILE)
-
-#----------------------------------------------------------------------------
-# Define the list of object files to create dependency information for
-#----------------------------------------------------------------------------
-
-DEPEND_OBJ = validate$O $(OBJECTS)
-
-.INCLUDE: "$(SCITECH)/makedefs/common.mk"
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/makefile.cross b/board/MAI/bios_emulator/scitech/src/x86emu/makefile.cross
deleted file mode 100644
index 0bce9a96e5..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/makefile.cross
+++ /dev/null
@@ -1,82 +0,0 @@
-#############################################################################
-#
-# Realmode X86 Emulator Library
-#
-# Copyright (C) 1996-1999 SciTech Software, Inc.
-#
-# ========================================================================
-#
-# Permission to use, copy, modify, distribute, and sell this software and
-# its documentation for any purpose is hereby granted without fee,
-# provided that the above copyright notice appear in all copies and that
-# both that copyright notice and this permission notice appear in
-# supporting documentation, and that the name of the authors not be used
-# in advertising or publicity pertaining to distribution of the software
-# without specific, written prior permission. The authors makes no
-# representations about the suitability of this software for any purpose.
-# It is provided "as is" without express or implied warranty.
-#
-# THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-# INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-# EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-# USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-# OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
-#
-# ========================================================================
-#
-# Descripton: Linux specific makefile for the x86emu library.
-#
-#############################################################################
-
-CC = $(CROSS_COMPILE)gcc
-AR = $(CROSS_COMPILE)ar
-
-TARGETLIB = libx86emu.a
-TARGETDEBUGLIB =libx86emud.a
-
-OBJS=\
-decode.o \
-fpu.o \
-ops.o \
-ops2.o \
-prim_ops.o \
-sys.o
-
-DEBUGOBJS=debug.d \
- decode.d \
- fpu.d \
- ops.d \
- ops2.d \
- prim_ops.d \
- sys.d
-
-.SUFFIXES: .d
-
-all: $(TARGETLIB) $(TARGETDEBUGLIB)
-
-$(TARGETLIB): $(OBJS)
- $(AR) rv $(TARGETLIB) $(OBJS)
-
-$(TARGETDEBUGLIB): $(DEBUGOBJS)
- $(AR) rv $(TARGETDEBUGLIB) $(DEBUGOBJS)
-
-INCS = -I. -Ix86emu -I../../include
-CFLAGS = -D__DRIVER__ -DFORCE_POST -D_CEXPORT= -DNO_LONG_LONG -Dprintk=printf -fsigned-char -fomit-frame-pointer -fPIC -ffixed-r14 -meabi
-CDEBUGFLAGS = -DDEBUG
-
-.c.o:
- $(CC) -g -O2 -Wall -c $(CFLAGS) $(INCS) $*.c
-
-.c.d:
- $(CC) -g -O2 -Wall -c -o$*.d $(CFLAGS) $(CDEBUGFLAGS) $(INCS) $*.c
-
-.cpp.o:
- $(CC) -c $(CFLAGS) $(INCS) $*.cpp
-
-clean:
- rm -f *.a *.o *.d
-
-validate: validate.o libx86emu.a
- $(CC) -o validate validate.o -lx86emu -L.
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/makefile.linux b/board/MAI/bios_emulator/scitech/src/x86emu/makefile.linux
deleted file mode 100644
index f74b88d4c8..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/makefile.linux
+++ /dev/null
@@ -1,81 +0,0 @@
-#############################################################################
-#
-# Realmode X86 Emulator Library
-#
-# Copyright (C) 1996-1999 SciTech Software, Inc.
-#
-# ========================================================================
-#
-# Permission to use, copy, modify, distribute, and sell this software and
-# its documentation for any purpose is hereby granted without fee,
-# provided that the above copyright notice appear in all copies and that
-# both that copyright notice and this permission notice appear in
-# supporting documentation, and that the name of the authors not be used
-# in advertising or publicity pertaining to distribution of the software
-# without specific, written prior permission. The authors makes no
-# representations about the suitability of this software for any purpose.
-# It is provided "as is" without express or implied warranty.
-#
-# THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-# INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-# EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-# USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-# OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
-#
-# ========================================================================
-#
-# Descripton: Linux specific makefile for the x86emu library.
-#
-#############################################################################
-
-TARGETLIB = libx86emu.a
-TARGETDEBUGLIB =libx86emud.a
-
-OBJS=\
-decode.o \
-fpu.o \
-ops.o \
-ops2.o \
-prim_ops.o \
-pregs.o \
-sys.o
-
-DEBUGOBJS=debug.d \
- decode.d \
- fpu.d \
- ops.d \
- ops2.d \
- prim_ops.d \
- pregs.d \
- sys.d
-
-.SUFFIXES: .d
-
-all: $(TARGETLIB) $(TARGETDEBUGLIB)
-
-$(TARGETLIB): $(OBJS)
- ar rv $(TARGETLIB) $(OBJS)
-
-$(TARGETDEBUGLIB): $(DEBUGOBJS)
- ar rv $(TARGETDEBUGLIB) $(DEBUGOBJS)
-
-INCS = -I. -Ix86emu -I../../include
-CFLAGS = -D__DRIVER__ -DFORCE_POST -D_CEXPORT= -DNO_LONG_LONG
-CDEBUGFLAGS = -DDEBUG
-
-.c.o:
- gcc -g -O -Wall -c $(CFLAGS) $(INCS) $*.c
-
-.c.d:
- gcc -g -O -Wall -c -o$*.d $(CFLAGS) $(CDEBUGFLAGS) $(INCS) $*.c
-
-.cpp.o:
- gcc -c $(CFLAGS) $(INCS) $*.cpp
-
-clean:
- rm -f *.a *.o *.d
-
-validate: validate.o libx86emu.a
- gcc -o validate validate.o -lx86emu -L.
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/makefile.uboot b/board/MAI/bios_emulator/scitech/src/x86emu/makefile.uboot
deleted file mode 100644
index af9ae1f589..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/makefile.uboot
+++ /dev/null
@@ -1,80 +0,0 @@
-#############################################################################
-#
-# Realmode X86 Emulator Library
-#
-# Copyright (C) 1996-1999 SciTech Software, Inc.
-#
-# ========================================================================
-#
-# Permission to use, copy, modify, distribute, and sell this software and
-# its documentation for any purpose is hereby granted without fee,
-# provided that the above copyright notice appear in all copies and that
-# both that copyright notice and this permission notice appear in
-# supporting documentation, and that the name of the authors not be used
-# in advertising or publicity pertaining to distribution of the software
-# without specific, written prior permission. The authors makes no
-# representations about the suitability of this software for any purpose.
-# It is provided "as is" without express or implied warranty.
-#
-# THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-# INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-# EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-# USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-# OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
-#
-# ========================================================================
-#
-# Descripton: Linux specific makefile for the x86emu library.
-#
-#############################################################################
-CC = $(CROSS_COMPILE)gcc
-AR = $(CROSS_COMPILE)ar
-TARGETLIB = libx86emu.a
-TARGETDEBUGLIB =libx86emud.a
-
-OBJS=\
-decode.o \
-fpu.o \
-ops.o \
-ops2.o \
-prim_ops.o \
-sys.o
-
-DEBUGOBJS=debug.d \
- decode.d \
- fpu.d \
- ops.d \
- ops2.d \
- prim_ops.d \
- sys.d
-
-.SUFFIXES: .d
-
-all: $(TARGETLIB) $(TARGETDEBUGLIB)
-
-$(TARGETLIB): $(OBJS)
- $(AR) rv $(TARGETLIB) $(OBJS)
-
-$(TARGETDEBUGLIB): $(DEBUGOBJS)
- $(AR) rv $(TARGETDEBUGLIB) $(DEBUGOBJS)
-
-INCS = -I. -Ix86emu -I../../include
-CFLAGS = -D__DRIVER__ -DFORCE_POST -D_CEXPORT= -DNO_LONG_LONG -Dprintk=printf -fsigned-char -fomit-frame-pointer -fPIC -ffixed-r14 -meabi
-CDEBUGFLAGS = -DDEBUG
-
-.c.o:
- $(CC) -g -O2 -Wall -c $(CFLAGS) $(INCS) $*.c
-
-.c.d:
- $(CC) -g -O2 -Wall -c -o$*.d $(CFLAGS) $(CDEBUGFLAGS) $(INCS) $*.c
-
-.cpp.o:
- $(CC) -c $(CFLAGS) $(INCS) $*.cpp
-
-clean:
- rm -f *.a *.o *.d
-
-validate: validate.o libx86emu.a
- $(CC) -o validate validate.o -lx86emu -L.
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/ops.c b/board/MAI/bios_emulator/scitech/src/x86emu/ops.c
deleted file mode 100644
index 2d4f93eee4..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/ops.c
+++ /dev/null
@@ -1,11701 +0,0 @@
-/****************************************************************************
-*
-* Realmode X86 Emulator Library
-*
-* Copyright (C) 1996-1999 SciTech Software, Inc.
-* Copyright (C) David Mosberger-Tang
-* Copyright (C) 1999 Egbert Eich
-*
-* ========================================================================
-*
-* Permission to use, copy, modify, distribute, and sell this software and
-* its documentation for any purpose is hereby granted without fee,
-* provided that the above copyright notice appear in all copies and that
-* both that copyright notice and this permission notice appear in
-* supporting documentation, and that the name of the authors not be used
-* in advertising or publicity pertaining to distribution of the software
-* without specific, written prior permission. The authors makes no
-* representations about the suitability of this software for any purpose.
-* It is provided "as is" without express or implied warranty.
-*
-* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-* Developer: Kendall Bennett
-*
-* Description: This file includes subroutines to implement the decoding
-* and emulation of all the x86 processor instructions.
-*
-* There are approximately 250 subroutines in here, which correspond
-* to the 256 byte-"opcodes" found on the 8086. The table which
-* dispatches this is found in the files optab.[ch].
-*
-* Each opcode proc has a comment preceeding it which gives it's table
-* address. Several opcodes are missing (undefined) in the table.
-*
-* Each proc includes information for decoding (DECODE_PRINTF and
-* DECODE_PRINTF2), debugging (TRACE_REGS, SINGLE_STEP), and misc
-* functions (START_OF_INSTR, END_OF_INSTR).
-*
-* Many of the procedures are *VERY* similar in coding. This has
-* allowed for a very large amount of code to be generated in a fairly
-* short amount of time (i.e. cut, paste, and modify). The result is
-* that much of the code below could have been folded into subroutines
-* for a large reduction in size of this file. The downside would be
-* that there would be a penalty in execution speed. The file could
-* also have been *MUCH* larger by inlining certain functions which
-* were called. This could have resulted even faster execution. The
-* prime directive I used to decide whether to inline the code or to
-* modularize it, was basically: 1) no unnecessary subroutine calls,
-* 2) no routines more than about 200 lines in size, and 3) modularize
-* any code that I might not get right the first time. The fetch_*
-* subroutines fall into the latter category. The The decode_* fall
-* into the second category. The coding of the "switch(mod){ .... }"
-* in many of the subroutines below falls into the first category.
-* Especially, the coding of {add,and,or,sub,...}_{byte,word}
-* subroutines are an especially glaring case of the third guideline.
-* Since so much of the code is cloned from other modules (compare
-* opcode #00 to opcode #01), making the basic operations subroutine
-* calls is especially important; otherwise mistakes in coding an
-* "add" would represent a nightmare in maintenance.
-*
-****************************************************************************/
-
-#include "x86emu/x86emui.h"
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-op1 - Instruction op code
-
-REMARKS:
-Handles illegal opcodes.
-****************************************************************************/
-void x86emuOp_illegal_op(
- u8 op1)
-{
- START_OF_INSTR();
- DECODE_PRINTF("ILLEGAL X86 OPCODE\n");
- TRACE_REGS();
- printk("%04x:%04x: %02X ILLEGAL X86 OPCODE!\n",
- M.x86.R_CS, M.x86.R_IP-1,op1);
- HALT_SYS();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x00
-****************************************************************************/
-void x86emuOp_add_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
- u8 *destreg, *srcreg;
- u8 destval;
-
- START_OF_INSTR();
- DECODE_PRINTF("ADD\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = add_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
- case 1:
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = add_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
- case 2:
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = add_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = add_byte(*destreg, *srcreg);
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x01
-****************************************************************************/
-void x86emuOp_add_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("ADD\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = add_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = add_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = add_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = add_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = add_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = add_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = add_long(*destreg, *srcreg);
- } else {
- u16 *destreg,*srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = add_word(*destreg, *srcreg);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x02
-****************************************************************************/
-void x86emuOp_add_byte_R_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg, *srcreg;
- uint srcoffset;
- u8 srcval;
-
- START_OF_INSTR();
- DECODE_PRINTF("ADD\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = add_byte(*destreg, srcval);
- break;
- case 1:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = add_byte(*destreg, srcval);
- break;
- case 2:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = add_byte(*destreg, srcval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = add_byte(*destreg, *srcreg);
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x03
-****************************************************************************/
-void x86emuOp_add_word_R_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint srcoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("ADD\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = add_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = add_word(*destreg, srcval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = add_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = add_word(*destreg, srcval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = add_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = add_word(*destreg, srcval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = add_long(*destreg, *srcreg);
- } else {
- u16 *destreg,*srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = add_word(*destreg, *srcreg);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x04
-****************************************************************************/
-void x86emuOp_add_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
- u8 srcval;
-
- START_OF_INSTR();
- DECODE_PRINTF("ADD\tAL,");
- srcval = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- M.x86.R_AL = add_byte(M.x86.R_AL, srcval);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x05
-****************************************************************************/
-void x86emuOp_add_word_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
- u32 srcval;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("ADD\tEAX,");
- srcval = fetch_long_imm();
- } else {
- DECODE_PRINTF("ADD\tAX,");
- srcval = fetch_word_imm();
- }
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EAX = add_long(M.x86.R_EAX, srcval);
- } else {
- M.x86.R_AX = add_word(M.x86.R_AX, (u16)srcval);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x06
-****************************************************************************/
-void x86emuOp_push_ES(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("PUSH\tES\n");
- TRACE_AND_STEP();
- push_word(M.x86.R_ES);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x07
-****************************************************************************/
-void x86emuOp_pop_ES(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("POP\tES\n");
- TRACE_AND_STEP();
- M.x86.R_ES = pop_word();
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x08
-****************************************************************************/
-void x86emuOp_or_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg, *srcreg;
- uint destoffset;
- u8 destval;
-
- START_OF_INSTR();
- DECODE_PRINTF("OR\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = or_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
- case 1:
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = or_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
- case 2:
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = or_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = or_byte(*destreg, *srcreg);
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x09
-****************************************************************************/
-void x86emuOp_or_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("OR\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = or_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = or_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = or_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = or_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = or_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = or_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = or_long(*destreg, *srcreg);
- } else {
- u16 *destreg,*srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = or_word(*destreg, *srcreg);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0a
-****************************************************************************/
-void x86emuOp_or_byte_R_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg, *srcreg;
- uint srcoffset;
- u8 srcval;
-
- START_OF_INSTR();
- DECODE_PRINTF("OR\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = or_byte(*destreg, srcval);
- break;
- case 1:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = or_byte(*destreg, srcval);
- break;
- case 2:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = or_byte(*destreg, srcval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = or_byte(*destreg, *srcreg);
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0b
-****************************************************************************/
-void x86emuOp_or_word_R_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint srcoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("OR\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = or_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = or_word(*destreg, srcval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = or_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = or_word(*destreg, srcval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = or_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = or_word(*destreg, srcval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = or_long(*destreg, *srcreg);
- } else {
- u16 *destreg,*srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = or_word(*destreg, *srcreg);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0c
-****************************************************************************/
-void x86emuOp_or_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
- u8 srcval;
-
- START_OF_INSTR();
- DECODE_PRINTF("OR\tAL,");
- srcval = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- M.x86.R_AL = or_byte(M.x86.R_AL, srcval);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0d
-****************************************************************************/
-void x86emuOp_or_word_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
- u32 srcval;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("OR\tEAX,");
- srcval = fetch_long_imm();
- } else {
- DECODE_PRINTF("OR\tAX,");
- srcval = fetch_word_imm();
- }
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EAX = or_long(M.x86.R_EAX, srcval);
- } else {
- M.x86.R_AX = or_word(M.x86.R_AX, (u16)srcval);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0e
-****************************************************************************/
-void x86emuOp_push_CS(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("PUSH\tCS\n");
- TRACE_AND_STEP();
- push_word(M.x86.R_CS);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f. Escape for two-byte opcode (286 or better)
-****************************************************************************/
-void x86emuOp_two_byte(u8 X86EMU_UNUSED(op1))
-{
- u8 op2 = (*sys_rdb)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP++));
- INC_DECODED_INST_LEN(1);
- (*x86emu_optab2[op2])(op2);
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x10
-****************************************************************************/
-void x86emuOp_adc_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg, *srcreg;
- uint destoffset;
- u8 destval;
-
- START_OF_INSTR();
- DECODE_PRINTF("ADC\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = adc_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
- case 1:
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = adc_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
- case 2:
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = adc_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = adc_byte(*destreg, *srcreg);
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x11
-****************************************************************************/
-void x86emuOp_adc_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("ADC\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = adc_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = adc_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = adc_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = adc_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = adc_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = adc_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = adc_long(*destreg, *srcreg);
- } else {
- u16 *destreg,*srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = adc_word(*destreg, *srcreg);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x12
-****************************************************************************/
-void x86emuOp_adc_byte_R_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg, *srcreg;
- uint srcoffset;
- u8 srcval;
-
- START_OF_INSTR();
- DECODE_PRINTF("ADC\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = adc_byte(*destreg, srcval);
- break;
- case 1:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = adc_byte(*destreg, srcval);
- break;
- case 2:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = adc_byte(*destreg, srcval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = adc_byte(*destreg, *srcreg);
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x13
-****************************************************************************/
-void x86emuOp_adc_word_R_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint srcoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("ADC\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = adc_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = adc_word(*destreg, srcval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = adc_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = adc_word(*destreg, srcval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = adc_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = adc_word(*destreg, srcval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = adc_long(*destreg, *srcreg);
- } else {
- u16 *destreg,*srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = adc_word(*destreg, *srcreg);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x14
-****************************************************************************/
-void x86emuOp_adc_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
- u8 srcval;
-
- START_OF_INSTR();
- DECODE_PRINTF("ADC\tAL,");
- srcval = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- M.x86.R_AL = adc_byte(M.x86.R_AL, srcval);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x15
-****************************************************************************/
-void x86emuOp_adc_word_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
- u32 srcval;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("ADC\tEAX,");
- srcval = fetch_long_imm();
- } else {
- DECODE_PRINTF("ADC\tAX,");
- srcval = fetch_word_imm();
- }
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EAX = adc_long(M.x86.R_EAX, srcval);
- } else {
- M.x86.R_AX = adc_word(M.x86.R_AX, (u16)srcval);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x16
-****************************************************************************/
-void x86emuOp_push_SS(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("PUSH\tSS\n");
- TRACE_AND_STEP();
- push_word(M.x86.R_SS);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x17
-****************************************************************************/
-void x86emuOp_pop_SS(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("POP\tSS\n");
- TRACE_AND_STEP();
- M.x86.R_SS = pop_word();
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x18
-****************************************************************************/
-void x86emuOp_sbb_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg, *srcreg;
- uint destoffset;
- u8 destval;
-
- START_OF_INSTR();
- DECODE_PRINTF("SBB\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = sbb_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
- case 1:
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = sbb_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
- case 2:
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = sbb_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sbb_byte(*destreg, *srcreg);
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x19
-****************************************************************************/
-void x86emuOp_sbb_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("SBB\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = sbb_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = sbb_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = sbb_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = sbb_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = sbb_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = sbb_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sbb_long(*destreg, *srcreg);
- } else {
- u16 *destreg,*srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sbb_word(*destreg, *srcreg);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x1a
-****************************************************************************/
-void x86emuOp_sbb_byte_R_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg, *srcreg;
- uint srcoffset;
- u8 srcval;
-
- START_OF_INSTR();
- DECODE_PRINTF("SBB\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sbb_byte(*destreg, srcval);
- break;
- case 1:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sbb_byte(*destreg, srcval);
- break;
- case 2:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sbb_byte(*destreg, srcval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sbb_byte(*destreg, *srcreg);
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x1b
-****************************************************************************/
-void x86emuOp_sbb_word_R_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint srcoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("SBB\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sbb_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sbb_word(*destreg, srcval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sbb_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sbb_word(*destreg, srcval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sbb_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sbb_word(*destreg, srcval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sbb_long(*destreg, *srcreg);
- } else {
- u16 *destreg,*srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sbb_word(*destreg, *srcreg);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x1c
-****************************************************************************/
-void x86emuOp_sbb_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
- u8 srcval;
-
- START_OF_INSTR();
- DECODE_PRINTF("SBB\tAL,");
- srcval = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- M.x86.R_AL = sbb_byte(M.x86.R_AL, srcval);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x1d
-****************************************************************************/
-void x86emuOp_sbb_word_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
- u32 srcval;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("SBB\tEAX,");
- srcval = fetch_long_imm();
- } else {
- DECODE_PRINTF("SBB\tAX,");
- srcval = fetch_word_imm();
- }
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EAX = sbb_long(M.x86.R_EAX, srcval);
- } else {
- M.x86.R_AX = sbb_word(M.x86.R_AX, (u16)srcval);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x1e
-****************************************************************************/
-void x86emuOp_push_DS(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("PUSH\tDS\n");
- TRACE_AND_STEP();
- push_word(M.x86.R_DS);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x1f
-****************************************************************************/
-void x86emuOp_pop_DS(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("POP\tDS\n");
- TRACE_AND_STEP();
- M.x86.R_DS = pop_word();
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x20
-****************************************************************************/
-void x86emuOp_and_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg, *srcreg;
- uint destoffset;
- u8 destval;
-
- START_OF_INSTR();
- DECODE_PRINTF("AND\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
-
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = and_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
-
- case 1:
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = and_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
-
- case 2:
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = and_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
-
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = and_byte(*destreg, *srcreg);
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x21
-****************************************************************************/
-void x86emuOp_and_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("AND\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = and_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = and_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = and_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = and_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = and_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = and_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = and_long(*destreg, *srcreg);
- } else {
- u16 *destreg,*srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = and_word(*destreg, *srcreg);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x22
-****************************************************************************/
-void x86emuOp_and_byte_R_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg, *srcreg;
- uint srcoffset;
- u8 srcval;
-
- START_OF_INSTR();
- DECODE_PRINTF("AND\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = and_byte(*destreg, srcval);
- break;
- case 1:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = and_byte(*destreg, srcval);
- break;
- case 2:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = and_byte(*destreg, srcval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = and_byte(*destreg, *srcreg);
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x23
-****************************************************************************/
-void x86emuOp_and_word_R_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint srcoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("AND\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = and_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = and_word(*destreg, srcval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = and_long(*destreg, srcval);
- break;
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = and_word(*destreg, srcval);
- break;
- }
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = and_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = and_word(*destreg, srcval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = and_long(*destreg, *srcreg);
- } else {
- u16 *destreg,*srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = and_word(*destreg, *srcreg);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x24
-****************************************************************************/
-void x86emuOp_and_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
- u8 srcval;
-
- START_OF_INSTR();
- DECODE_PRINTF("AND\tAL,");
- srcval = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- M.x86.R_AL = and_byte(M.x86.R_AL, srcval);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x25
-****************************************************************************/
-void x86emuOp_and_word_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
- u32 srcval;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("AND\tEAX,");
- srcval = fetch_long_imm();
- } else {
- DECODE_PRINTF("AND\tAX,");
- srcval = fetch_word_imm();
- }
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EAX = and_long(M.x86.R_EAX, srcval);
- } else {
- M.x86.R_AX = and_word(M.x86.R_AX, (u16)srcval);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x26
-****************************************************************************/
-void x86emuOp_segovr_ES(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("ES:\n");
- TRACE_AND_STEP();
- M.x86.mode |= SYSMODE_SEGOVR_ES;
- /*
- * note the lack of DECODE_CLEAR_SEGOVR(r) since, here is one of 4
- * opcode subroutines we do not want to do this.
- */
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x27
-****************************************************************************/
-void x86emuOp_daa(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("DAA\n");
- TRACE_AND_STEP();
- M.x86.R_AL = daa_byte(M.x86.R_AL);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x28
-****************************************************************************/
-void x86emuOp_sub_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg, *srcreg;
- uint destoffset;
- u8 destval;
-
- START_OF_INSTR();
- DECODE_PRINTF("SUB\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = sub_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
- case 1:
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = sub_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
- case 2:
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = sub_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sub_byte(*destreg, *srcreg);
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x29
-****************************************************************************/
-void x86emuOp_sub_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("SUB\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = sub_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = sub_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = sub_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = sub_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = sub_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = sub_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sub_long(*destreg, *srcreg);
- } else {
- u16 *destreg,*srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sub_word(*destreg, *srcreg);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x2a
-****************************************************************************/
-void x86emuOp_sub_byte_R_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg, *srcreg;
- uint srcoffset;
- u8 srcval;
-
- START_OF_INSTR();
- DECODE_PRINTF("SUB\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sub_byte(*destreg, srcval);
- break;
- case 1:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sub_byte(*destreg, srcval);
- break;
- case 2:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sub_byte(*destreg, srcval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sub_byte(*destreg, *srcreg);
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x2b
-****************************************************************************/
-void x86emuOp_sub_word_R_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint srcoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("SUB\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sub_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sub_word(*destreg, srcval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sub_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sub_word(*destreg, srcval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sub_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sub_word(*destreg, srcval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sub_long(*destreg, *srcreg);
- } else {
- u16 *destreg,*srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = sub_word(*destreg, *srcreg);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x2c
-****************************************************************************/
-void x86emuOp_sub_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
- u8 srcval;
-
- START_OF_INSTR();
- DECODE_PRINTF("SUB\tAL,");
- srcval = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- M.x86.R_AL = sub_byte(M.x86.R_AL, srcval);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x2d
-****************************************************************************/
-void x86emuOp_sub_word_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
- u32 srcval;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("SUB\tEAX,");
- srcval = fetch_long_imm();
- } else {
- DECODE_PRINTF("SUB\tAX,");
- srcval = fetch_word_imm();
- }
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EAX = sub_long(M.x86.R_EAX, srcval);
- } else {
- M.x86.R_AX = sub_word(M.x86.R_AX, (u16)srcval);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x2e
-****************************************************************************/
-void x86emuOp_segovr_CS(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("CS:\n");
- TRACE_AND_STEP();
- M.x86.mode |= SYSMODE_SEGOVR_CS;
- /* note no DECODE_CLEAR_SEGOVR here. */
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x2f
-****************************************************************************/
-void x86emuOp_das(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("DAS\n");
- TRACE_AND_STEP();
- M.x86.R_AL = das_byte(M.x86.R_AL);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x30
-****************************************************************************/
-void x86emuOp_xor_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg, *srcreg;
- uint destoffset;
- u8 destval;
-
- START_OF_INSTR();
- DECODE_PRINTF("XOR\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = xor_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
- case 1:
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = xor_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
- case 2:
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = xor_byte(destval, *srcreg);
- store_data_byte(destoffset, destval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = xor_byte(*destreg, *srcreg);
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x31
-****************************************************************************/
-void x86emuOp_xor_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("XOR\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = xor_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = xor_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = xor_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = xor_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = xor_long(destval, *srcreg);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = xor_word(destval, *srcreg);
- store_data_word(destoffset, destval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = xor_long(*destreg, *srcreg);
- } else {
- u16 *destreg,*srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = xor_word(*destreg, *srcreg);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x32
-****************************************************************************/
-void x86emuOp_xor_byte_R_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg, *srcreg;
- uint srcoffset;
- u8 srcval;
-
- START_OF_INSTR();
- DECODE_PRINTF("XOR\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = xor_byte(*destreg, srcval);
- break;
- case 1:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = xor_byte(*destreg, srcval);
- break;
- case 2:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = xor_byte(*destreg, srcval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = xor_byte(*destreg, *srcreg);
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x33
-****************************************************************************/
-void x86emuOp_xor_word_R_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint srcoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("XOR\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = xor_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = xor_word(*destreg, srcval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = xor_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = xor_word(*destreg, srcval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = xor_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = xor_word(*destreg, srcval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = xor_long(*destreg, *srcreg);
- } else {
- u16 *destreg,*srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = xor_word(*destreg, *srcreg);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x34
-****************************************************************************/
-void x86emuOp_xor_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
- u8 srcval;
-
- START_OF_INSTR();
- DECODE_PRINTF("XOR\tAL,");
- srcval = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- M.x86.R_AL = xor_byte(M.x86.R_AL, srcval);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x35
-****************************************************************************/
-void x86emuOp_xor_word_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
- u32 srcval;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("XOR\tEAX,");
- srcval = fetch_long_imm();
- } else {
- DECODE_PRINTF("XOR\tAX,");
- srcval = fetch_word_imm();
- }
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EAX = xor_long(M.x86.R_EAX, srcval);
- } else {
- M.x86.R_AX = xor_word(M.x86.R_AX, (u16)srcval);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x36
-****************************************************************************/
-void x86emuOp_segovr_SS(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("SS:\n");
- TRACE_AND_STEP();
- M.x86.mode |= SYSMODE_SEGOVR_SS;
- /* no DECODE_CLEAR_SEGOVR ! */
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x37
-****************************************************************************/
-void x86emuOp_aaa(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("AAA\n");
- TRACE_AND_STEP();
- M.x86.R_AX = aaa_word(M.x86.R_AX);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x38
-****************************************************************************/
-void x86emuOp_cmp_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
- u8 *destreg, *srcreg;
- u8 destval;
-
- START_OF_INSTR();
- DECODE_PRINTF("CMP\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_byte(destval, *srcreg);
- break;
- case 1:
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_byte(destval, *srcreg);
- break;
- case 2:
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_byte(destval, *srcreg);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_byte(*destreg, *srcreg);
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x39
-****************************************************************************/
-void x86emuOp_cmp_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("CMP\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_long(destval, *srcreg);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_word(destval, *srcreg);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_long(destval, *srcreg);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_word(destval, *srcreg);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_long(destval, *srcreg);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_word(destval, *srcreg);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_long(*destreg, *srcreg);
- } else {
- u16 *destreg,*srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_word(*destreg, *srcreg);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x3a
-****************************************************************************/
-void x86emuOp_cmp_byte_R_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg, *srcreg;
- uint srcoffset;
- u8 srcval;
-
- START_OF_INSTR();
- DECODE_PRINTF("CMP\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_byte(*destreg, srcval);
- break;
- case 1:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_byte(*destreg, srcval);
- break;
- case 2:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_byte(*destreg, srcval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_byte(*destreg, *srcreg);
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x3b
-****************************************************************************/
-void x86emuOp_cmp_word_R_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint srcoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("CMP\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_word(*destreg, srcval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_word(*destreg, srcval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_word(*destreg, srcval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_long(*destreg, *srcreg);
- } else {
- u16 *destreg,*srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- cmp_word(*destreg, *srcreg);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x3c
-****************************************************************************/
-void x86emuOp_cmp_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
- u8 srcval;
-
- START_OF_INSTR();
- DECODE_PRINTF("CMP\tAL,");
- srcval = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- cmp_byte(M.x86.R_AL, srcval);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x3d
-****************************************************************************/
-void x86emuOp_cmp_word_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
- u32 srcval;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("CMP\tEAX,");
- srcval = fetch_long_imm();
- } else {
- DECODE_PRINTF("CMP\tAX,");
- srcval = fetch_word_imm();
- }
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- cmp_long(M.x86.R_EAX, srcval);
- } else {
- cmp_word(M.x86.R_AX, (u16)srcval);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x3e
-****************************************************************************/
-void x86emuOp_segovr_DS(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("DS:\n");
- TRACE_AND_STEP();
- M.x86.mode |= SYSMODE_SEGOVR_DS;
- /* NO DECODE_CLEAR_SEGOVR! */
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x3f
-****************************************************************************/
-void x86emuOp_aas(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("AAS\n");
- TRACE_AND_STEP();
- M.x86.R_AX = aas_word(M.x86.R_AX);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x40
-****************************************************************************/
-void x86emuOp_inc_AX(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("INC\tEAX\n");
- } else {
- DECODE_PRINTF("INC\tAX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EAX = inc_long(M.x86.R_EAX);
- } else {
- M.x86.R_AX = inc_word(M.x86.R_AX);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x41
-****************************************************************************/
-void x86emuOp_inc_CX(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("INC\tECX\n");
- } else {
- DECODE_PRINTF("INC\tCX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_ECX = inc_long(M.x86.R_ECX);
- } else {
- M.x86.R_CX = inc_word(M.x86.R_CX);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x42
-****************************************************************************/
-void x86emuOp_inc_DX(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("INC\tEDX\n");
- } else {
- DECODE_PRINTF("INC\tDX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EDX = inc_long(M.x86.R_EDX);
- } else {
- M.x86.R_DX = inc_word(M.x86.R_DX);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x43
-****************************************************************************/
-void x86emuOp_inc_BX(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("INC\tEBX\n");
- } else {
- DECODE_PRINTF("INC\tBX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EBX = inc_long(M.x86.R_EBX);
- } else {
- M.x86.R_BX = inc_word(M.x86.R_BX);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x44
-****************************************************************************/
-void x86emuOp_inc_SP(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("INC\tESP\n");
- } else {
- DECODE_PRINTF("INC\tSP\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_ESP = inc_long(M.x86.R_ESP);
- } else {
- M.x86.R_SP = inc_word(M.x86.R_SP);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x45
-****************************************************************************/
-void x86emuOp_inc_BP(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("INC\tEBP\n");
- } else {
- DECODE_PRINTF("INC\tBP\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EBP = inc_long(M.x86.R_EBP);
- } else {
- M.x86.R_BP = inc_word(M.x86.R_BP);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x46
-****************************************************************************/
-void x86emuOp_inc_SI(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("INC\tESI\n");
- } else {
- DECODE_PRINTF("INC\tSI\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_ESI = inc_long(M.x86.R_ESI);
- } else {
- M.x86.R_SI = inc_word(M.x86.R_SI);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x47
-****************************************************************************/
-void x86emuOp_inc_DI(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("INC\tEDI\n");
- } else {
- DECODE_PRINTF("INC\tDI\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EDI = inc_long(M.x86.R_EDI);
- } else {
- M.x86.R_DI = inc_word(M.x86.R_DI);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x48
-****************************************************************************/
-void x86emuOp_dec_AX(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("DEC\tEAX\n");
- } else {
- DECODE_PRINTF("DEC\tAX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EAX = dec_long(M.x86.R_EAX);
- } else {
- M.x86.R_AX = dec_word(M.x86.R_AX);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x49
-****************************************************************************/
-void x86emuOp_dec_CX(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("DEC\tECX\n");
- } else {
- DECODE_PRINTF("DEC\tCX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_ECX = dec_long(M.x86.R_ECX);
- } else {
- M.x86.R_CX = dec_word(M.x86.R_CX);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x4a
-****************************************************************************/
-void x86emuOp_dec_DX(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("DEC\tEDX\n");
- } else {
- DECODE_PRINTF("DEC\tDX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EDX = dec_long(M.x86.R_EDX);
- } else {
- M.x86.R_DX = dec_word(M.x86.R_DX);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x4b
-****************************************************************************/
-void x86emuOp_dec_BX(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("DEC\tEBX\n");
- } else {
- DECODE_PRINTF("DEC\tBX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EBX = dec_long(M.x86.R_EBX);
- } else {
- M.x86.R_BX = dec_word(M.x86.R_BX);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x4c
-****************************************************************************/
-void x86emuOp_dec_SP(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("DEC\tESP\n");
- } else {
- DECODE_PRINTF("DEC\tSP\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_ESP = dec_long(M.x86.R_ESP);
- } else {
- M.x86.R_SP = dec_word(M.x86.R_SP);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x4d
-****************************************************************************/
-void x86emuOp_dec_BP(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("DEC\tEBP\n");
- } else {
- DECODE_PRINTF("DEC\tBP\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EBP = dec_long(M.x86.R_EBP);
- } else {
- M.x86.R_BP = dec_word(M.x86.R_BP);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x4e
-****************************************************************************/
-void x86emuOp_dec_SI(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("DEC\tESI\n");
- } else {
- DECODE_PRINTF("DEC\tSI\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_ESI = dec_long(M.x86.R_ESI);
- } else {
- M.x86.R_SI = dec_word(M.x86.R_SI);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x4f
-****************************************************************************/
-void x86emuOp_dec_DI(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("DEC\tEDI\n");
- } else {
- DECODE_PRINTF("DEC\tDI\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EDI = dec_long(M.x86.R_EDI);
- } else {
- M.x86.R_DI = dec_word(M.x86.R_DI);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x50
-****************************************************************************/
-void x86emuOp_push_AX(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("PUSH\tEAX\n");
- } else {
- DECODE_PRINTF("PUSH\tAX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- push_long(M.x86.R_EAX);
- } else {
- push_word(M.x86.R_AX);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x51
-****************************************************************************/
-void x86emuOp_push_CX(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("PUSH\tECX\n");
- } else {
- DECODE_PRINTF("PUSH\tCX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- push_long(M.x86.R_ECX);
- } else {
- push_word(M.x86.R_CX);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x52
-****************************************************************************/
-void x86emuOp_push_DX(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("PUSH\tEDX\n");
- } else {
- DECODE_PRINTF("PUSH\tDX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- push_long(M.x86.R_EDX);
- } else {
- push_word(M.x86.R_DX);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x53
-****************************************************************************/
-void x86emuOp_push_BX(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("PUSH\tEBX\n");
- } else {
- DECODE_PRINTF("PUSH\tBX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- push_long(M.x86.R_EBX);
- } else {
- push_word(M.x86.R_BX);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x54
-****************************************************************************/
-void x86emuOp_push_SP(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("PUSH\tESP\n");
- } else {
- DECODE_PRINTF("PUSH\tSP\n");
- }
- TRACE_AND_STEP();
- /* Always push (E)SP, since we are emulating an i386 and above
- * processor. This is necessary as some BIOS'es use this to check
- * what type of processor is in the system.
- */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- push_long(M.x86.R_ESP);
- } else {
- push_word((u16)(M.x86.R_SP));
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x55
-****************************************************************************/
-void x86emuOp_push_BP(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("PUSH\tEBP\n");
- } else {
- DECODE_PRINTF("PUSH\tBP\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- push_long(M.x86.R_EBP);
- } else {
- push_word(M.x86.R_BP);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x56
-****************************************************************************/
-void x86emuOp_push_SI(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("PUSH\tESI\n");
- } else {
- DECODE_PRINTF("PUSH\tSI\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- push_long(M.x86.R_ESI);
- } else {
- push_word(M.x86.R_SI);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x57
-****************************************************************************/
-void x86emuOp_push_DI(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("PUSH\tEDI\n");
- } else {
- DECODE_PRINTF("PUSH\tDI\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- push_long(M.x86.R_EDI);
- } else {
- push_word(M.x86.R_DI);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x58
-****************************************************************************/
-void x86emuOp_pop_AX(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("POP\tEAX\n");
- } else {
- DECODE_PRINTF("POP\tAX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EAX = pop_long();
- } else {
- M.x86.R_AX = pop_word();
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x59
-****************************************************************************/
-void x86emuOp_pop_CX(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("POP\tECX\n");
- } else {
- DECODE_PRINTF("POP\tCX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_ECX = pop_long();
- } else {
- M.x86.R_CX = pop_word();
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x5a
-****************************************************************************/
-void x86emuOp_pop_DX(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("POP\tEDX\n");
- } else {
- DECODE_PRINTF("POP\tDX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EDX = pop_long();
- } else {
- M.x86.R_DX = pop_word();
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x5b
-****************************************************************************/
-void x86emuOp_pop_BX(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("POP\tEBX\n");
- } else {
- DECODE_PRINTF("POP\tBX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EBX = pop_long();
- } else {
- M.x86.R_BX = pop_word();
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x5c
-****************************************************************************/
-void x86emuOp_pop_SP(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("POP\tESP\n");
- } else {
- DECODE_PRINTF("POP\tSP\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_ESP = pop_long();
- } else {
- M.x86.R_SP = pop_word();
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x5d
-****************************************************************************/
-void x86emuOp_pop_BP(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("POP\tEBP\n");
- } else {
- DECODE_PRINTF("POP\tBP\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EBP = pop_long();
- } else {
- M.x86.R_BP = pop_word();
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x5e
-****************************************************************************/
-void x86emuOp_pop_SI(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("POP\tESI\n");
- } else {
- DECODE_PRINTF("POP\tSI\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_ESI = pop_long();
- } else {
- M.x86.R_SI = pop_word();
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x5f
-****************************************************************************/
-void x86emuOp_pop_DI(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("POP\tEDI\n");
- } else {
- DECODE_PRINTF("POP\tDI\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EDI = pop_long();
- } else {
- M.x86.R_DI = pop_word();
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x60
-****************************************************************************/
-void x86emuOp_push_all(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("PUSHAD\n");
- } else {
- DECODE_PRINTF("PUSHA\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 old_sp = M.x86.R_ESP;
-
- push_long(M.x86.R_EAX);
- push_long(M.x86.R_ECX);
- push_long(M.x86.R_EDX);
- push_long(M.x86.R_EBX);
- push_long(old_sp);
- push_long(M.x86.R_EBP);
- push_long(M.x86.R_ESI);
- push_long(M.x86.R_EDI);
- } else {
- u16 old_sp = M.x86.R_SP;
-
- push_word(M.x86.R_AX);
- push_word(M.x86.R_CX);
- push_word(M.x86.R_DX);
- push_word(M.x86.R_BX);
- push_word(old_sp);
- push_word(M.x86.R_BP);
- push_word(M.x86.R_SI);
- push_word(M.x86.R_DI);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x61
-****************************************************************************/
-void x86emuOp_pop_all(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("POPAD\n");
- } else {
- DECODE_PRINTF("POPA\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EDI = pop_long();
- M.x86.R_ESI = pop_long();
- M.x86.R_EBP = pop_long();
- M.x86.R_ESP += 4; /* skip ESP */
- M.x86.R_EBX = pop_long();
- M.x86.R_EDX = pop_long();
- M.x86.R_ECX = pop_long();
- M.x86.R_EAX = pop_long();
- } else {
- M.x86.R_DI = pop_word();
- M.x86.R_SI = pop_word();
- M.x86.R_BP = pop_word();
- M.x86.R_SP += 2; /* skip SP */
- M.x86.R_BX = pop_word();
- M.x86.R_DX = pop_word();
- M.x86.R_CX = pop_word();
- M.x86.R_AX = pop_word();
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/*opcode 0x62 ILLEGAL OP, calls x86emuOp_illegal_op() */
-/*opcode 0x63 ILLEGAL OP, calls x86emuOp_illegal_op() */
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x64
-****************************************************************************/
-void x86emuOp_segovr_FS(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("FS:\n");
- TRACE_AND_STEP();
- M.x86.mode |= SYSMODE_SEGOVR_FS;
- /*
- * note the lack of DECODE_CLEAR_SEGOVR(r) since, here is one of 4
- * opcode subroutines we do not want to do this.
- */
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x65
-****************************************************************************/
-void x86emuOp_segovr_GS(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("GS:\n");
- TRACE_AND_STEP();
- M.x86.mode |= SYSMODE_SEGOVR_GS;
- /*
- * note the lack of DECODE_CLEAR_SEGOVR(r) since, here is one of 4
- * opcode subroutines we do not want to do this.
- */
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x66 - prefix for 32-bit register
-****************************************************************************/
-void x86emuOp_prefix_data(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("DATA:\n");
- TRACE_AND_STEP();
- M.x86.mode |= SYSMODE_PREFIX_DATA;
- /* note no DECODE_CLEAR_SEGOVR here. */
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x67 - prefix for 32-bit address
-****************************************************************************/
-void x86emuOp_prefix_addr(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("ADDR:\n");
- TRACE_AND_STEP();
- M.x86.mode |= SYSMODE_PREFIX_ADDR;
- /* note no DECODE_CLEAR_SEGOVR here. */
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x68
-****************************************************************************/
-void x86emuOp_push_word_IMM(u8 X86EMU_UNUSED(op1))
-{
- u32 imm;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- imm = fetch_long_imm();
- } else {
- imm = fetch_word_imm();
- }
- DECODE_PRINTF2("PUSH\t%x\n", imm);
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- push_long(imm);
- } else {
- push_word((u16)imm);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x69
-****************************************************************************/
-void x86emuOp_imul_word_IMM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint srcoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("IMUL\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
- u32 res_lo,res_hi;
- s32 imm;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_long(srcoffset);
- imm = fetch_long_imm();
- DECODE_PRINTF2(",%d\n", (s32)imm);
- TRACE_AND_STEP();
- imul_long_direct(&res_lo,&res_hi,(s32)srcval,(s32)imm);
- if (res_hi != 0) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u32)res_lo;
- } else {
- u16 *destreg;
- u16 srcval;
- u32 res;
- s16 imm;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_word(srcoffset);
- imm = fetch_word_imm();
- DECODE_PRINTF2(",%d\n", (s32)imm);
- TRACE_AND_STEP();
- res = (s16)srcval * (s16)imm;
- if (res > 0xFFFF) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u16)res;
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
- u32 res_lo,res_hi;
- s32 imm;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_long(srcoffset);
- imm = fetch_long_imm();
- DECODE_PRINTF2(",%d\n", (s32)imm);
- TRACE_AND_STEP();
- imul_long_direct(&res_lo,&res_hi,(s32)srcval,(s32)imm);
- if (res_hi != 0) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u32)res_lo;
- } else {
- u16 *destreg;
- u16 srcval;
- u32 res;
- s16 imm;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_word(srcoffset);
- imm = fetch_word_imm();
- DECODE_PRINTF2(",%d\n", (s32)imm);
- TRACE_AND_STEP();
- res = (s16)srcval * (s16)imm;
- if (res > 0xFFFF) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u16)res;
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
- u32 res_lo,res_hi;
- s32 imm;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_long(srcoffset);
- imm = fetch_long_imm();
- DECODE_PRINTF2(",%d\n", (s32)imm);
- TRACE_AND_STEP();
- imul_long_direct(&res_lo,&res_hi,(s32)srcval,(s32)imm);
- if (res_hi != 0) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u32)res_lo;
- } else {
- u16 *destreg;
- u16 srcval;
- u32 res;
- s16 imm;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_word(srcoffset);
- imm = fetch_word_imm();
- DECODE_PRINTF2(",%d\n", (s32)imm);
- TRACE_AND_STEP();
- res = (s16)srcval * (s16)imm;
- if (res > 0xFFFF) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u16)res;
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
- u32 res_lo,res_hi;
- s32 imm;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rl);
- imm = fetch_long_imm();
- DECODE_PRINTF2(",%d\n", (s32)imm);
- TRACE_AND_STEP();
- imul_long_direct(&res_lo,&res_hi,(s32)*srcreg,(s32)imm);
- if (res_hi != 0) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u32)res_lo;
- } else {
- u16 *destreg,*srcreg;
- u32 res;
- s16 imm;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- imm = fetch_word_imm();
- DECODE_PRINTF2(",%d\n", (s32)imm);
- res = (s16)*srcreg * (s16)imm;
- if (res > 0xFFFF) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u16)res;
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x6a
-****************************************************************************/
-void x86emuOp_push_byte_IMM(u8 X86EMU_UNUSED(op1))
-{
- s16 imm;
-
- START_OF_INSTR();
- imm = (s8)fetch_byte_imm();
- DECODE_PRINTF2("PUSH\t%d\n", imm);
- TRACE_AND_STEP();
- push_word(imm);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x6b
-****************************************************************************/
-void x86emuOp_imul_byte_IMM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint srcoffset;
- s8 imm;
-
- START_OF_INSTR();
- DECODE_PRINTF("IMUL\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
- u32 res_lo,res_hi;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_long(srcoffset);
- imm = fetch_byte_imm();
- DECODE_PRINTF2(",%d\n", (s32)imm);
- TRACE_AND_STEP();
- imul_long_direct(&res_lo,&res_hi,(s32)srcval,(s32)imm);
- if (res_hi != 0) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u32)res_lo;
- } else {
- u16 *destreg;
- u16 srcval;
- u32 res;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_word(srcoffset);
- imm = fetch_byte_imm();
- DECODE_PRINTF2(",%d\n", (s32)imm);
- TRACE_AND_STEP();
- res = (s16)srcval * (s16)imm;
- if (res > 0xFFFF) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u16)res;
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
- u32 res_lo,res_hi;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_long(srcoffset);
- imm = fetch_byte_imm();
- DECODE_PRINTF2(",%d\n", (s32)imm);
- TRACE_AND_STEP();
- imul_long_direct(&res_lo,&res_hi,(s32)srcval,(s32)imm);
- if (res_hi != 0) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u32)res_lo;
- } else {
- u16 *destreg;
- u16 srcval;
- u32 res;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_word(srcoffset);
- imm = fetch_byte_imm();
- DECODE_PRINTF2(",%d\n", (s32)imm);
- TRACE_AND_STEP();
- res = (s16)srcval * (s16)imm;
- if (res > 0xFFFF) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u16)res;
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
- u32 res_lo,res_hi;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_long(srcoffset);
- imm = fetch_byte_imm();
- DECODE_PRINTF2(",%d\n", (s32)imm);
- TRACE_AND_STEP();
- imul_long_direct(&res_lo,&res_hi,(s32)srcval,(s32)imm);
- if (res_hi != 0) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u32)res_lo;
- } else {
- u16 *destreg;
- u16 srcval;
- u32 res;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_word(srcoffset);
- imm = fetch_byte_imm();
- DECODE_PRINTF2(",%d\n", (s32)imm);
- TRACE_AND_STEP();
- res = (s16)srcval * (s16)imm;
- if (res > 0xFFFF) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u16)res;
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
- u32 res_lo,res_hi;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rl);
- imm = fetch_byte_imm();
- DECODE_PRINTF2(",%d\n", (s32)imm);
- TRACE_AND_STEP();
- imul_long_direct(&res_lo,&res_hi,(s32)*srcreg,(s32)imm);
- if (res_hi != 0) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u32)res_lo;
- } else {
- u16 *destreg,*srcreg;
- u32 res;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- imm = fetch_byte_imm();
- DECODE_PRINTF2(",%d\n", (s32)imm);
- res = (s16)*srcreg * (s16)imm;
- if (res > 0xFFFF) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u16)res;
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x6c
-****************************************************************************/
-void x86emuOp_ins_byte(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("INSB\n");
- ins(1);
- TRACE_AND_STEP();
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x6d
-****************************************************************************/
-void x86emuOp_ins_word(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("INSD\n");
- ins(4);
- } else {
- DECODE_PRINTF("INSW\n");
- ins(2);
- }
- TRACE_AND_STEP();
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x6e
-****************************************************************************/
-void x86emuOp_outs_byte(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("OUTSB\n");
- outs(1);
- TRACE_AND_STEP();
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x6f
-****************************************************************************/
-void x86emuOp_outs_word(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("OUTSD\n");
- outs(4);
- } else {
- DECODE_PRINTF("OUTSW\n");
- outs(2);
- }
- TRACE_AND_STEP();
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x70
-****************************************************************************/
-void x86emuOp_jump_near_O(u8 X86EMU_UNUSED(op1))
-{
- s8 offset;
- u16 target;
-
- /* jump to byte offset if overflow flag is set */
- START_OF_INSTR();
- DECODE_PRINTF("JO\t");
- offset = (s8)fetch_byte_imm();
- target = (u16)(M.x86.R_IP + (s16)offset);
- DECODE_PRINTF2("%x\n", target);
- TRACE_AND_STEP();
- if (ACCESS_FLAG(F_OF))
- M.x86.R_IP = target;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x71
-****************************************************************************/
-void x86emuOp_jump_near_NO(u8 X86EMU_UNUSED(op1))
-{
- s8 offset;
- u16 target;
-
- /* jump to byte offset if overflow is not set */
- START_OF_INSTR();
- DECODE_PRINTF("JNO\t");
- offset = (s8)fetch_byte_imm();
- target = (u16)(M.x86.R_IP + (s16)offset);
- DECODE_PRINTF2("%x\n", target);
- TRACE_AND_STEP();
- if (!ACCESS_FLAG(F_OF))
- M.x86.R_IP = target;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x72
-****************************************************************************/
-void x86emuOp_jump_near_B(u8 X86EMU_UNUSED(op1))
-{
- s8 offset;
- u16 target;
-
- /* jump to byte offset if carry flag is set. */
- START_OF_INSTR();
- DECODE_PRINTF("JB\t");
- offset = (s8)fetch_byte_imm();
- target = (u16)(M.x86.R_IP + (s16)offset);
- DECODE_PRINTF2("%x\n", target);
- TRACE_AND_STEP();
- if (ACCESS_FLAG(F_CF))
- M.x86.R_IP = target;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x73
-****************************************************************************/
-void x86emuOp_jump_near_NB(u8 X86EMU_UNUSED(op1))
-{
- s8 offset;
- u16 target;
-
- /* jump to byte offset if carry flag is clear. */
- START_OF_INSTR();
- DECODE_PRINTF("JNB\t");
- offset = (s8)fetch_byte_imm();
- target = (u16)(M.x86.R_IP + (s16)offset);
- DECODE_PRINTF2("%x\n", target);
- TRACE_AND_STEP();
- if (!ACCESS_FLAG(F_CF))
- M.x86.R_IP = target;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x74
-****************************************************************************/
-void x86emuOp_jump_near_Z(u8 X86EMU_UNUSED(op1))
-{
- s8 offset;
- u16 target;
-
- /* jump to byte offset if zero flag is set. */
- START_OF_INSTR();
- DECODE_PRINTF("JZ\t");
- offset = (s8)fetch_byte_imm();
- target = (u16)(M.x86.R_IP + (s16)offset);
- DECODE_PRINTF2("%x\n", target);
- TRACE_AND_STEP();
- if (ACCESS_FLAG(F_ZF))
- M.x86.R_IP = target;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x75
-****************************************************************************/
-void x86emuOp_jump_near_NZ(u8 X86EMU_UNUSED(op1))
-{
- s8 offset;
- u16 target;
-
- /* jump to byte offset if zero flag is clear. */
- START_OF_INSTR();
- DECODE_PRINTF("JNZ\t");
- offset = (s8)fetch_byte_imm();
- target = (u16)(M.x86.R_IP + (s16)offset);
- DECODE_PRINTF2("%x\n", target);
- TRACE_AND_STEP();
- if (!ACCESS_FLAG(F_ZF))
- M.x86.R_IP = target;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x76
-****************************************************************************/
-void x86emuOp_jump_near_BE(u8 X86EMU_UNUSED(op1))
-{
- s8 offset;
- u16 target;
-
- /* jump to byte offset if carry flag is set or if the zero
- flag is set. */
- START_OF_INSTR();
- DECODE_PRINTF("JBE\t");
- offset = (s8)fetch_byte_imm();
- target = (u16)(M.x86.R_IP + (s16)offset);
- DECODE_PRINTF2("%x\n", target);
- TRACE_AND_STEP();
- if (ACCESS_FLAG(F_CF) || ACCESS_FLAG(F_ZF))
- M.x86.R_IP = target;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x77
-****************************************************************************/
-void x86emuOp_jump_near_NBE(u8 X86EMU_UNUSED(op1))
-{
- s8 offset;
- u16 target;
-
- /* jump to byte offset if carry flag is clear and if the zero
- flag is clear */
- START_OF_INSTR();
- DECODE_PRINTF("JNBE\t");
- offset = (s8)fetch_byte_imm();
- target = (u16)(M.x86.R_IP + (s16)offset);
- DECODE_PRINTF2("%x\n", target);
- TRACE_AND_STEP();
- if (!(ACCESS_FLAG(F_CF) || ACCESS_FLAG(F_ZF)))
- M.x86.R_IP = target;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x78
-****************************************************************************/
-void x86emuOp_jump_near_S(u8 X86EMU_UNUSED(op1))
-{
- s8 offset;
- u16 target;
-
- /* jump to byte offset if sign flag is set */
- START_OF_INSTR();
- DECODE_PRINTF("JS\t");
- offset = (s8)fetch_byte_imm();
- target = (u16)(M.x86.R_IP + (s16)offset);
- DECODE_PRINTF2("%x\n", target);
- TRACE_AND_STEP();
- if (ACCESS_FLAG(F_SF))
- M.x86.R_IP = target;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x79
-****************************************************************************/
-void x86emuOp_jump_near_NS(u8 X86EMU_UNUSED(op1))
-{
- s8 offset;
- u16 target;
-
- /* jump to byte offset if sign flag is clear */
- START_OF_INSTR();
- DECODE_PRINTF("JNS\t");
- offset = (s8)fetch_byte_imm();
- target = (u16)(M.x86.R_IP + (s16)offset);
- DECODE_PRINTF2("%x\n", target);
- TRACE_AND_STEP();
- if (!ACCESS_FLAG(F_SF))
- M.x86.R_IP = target;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x7a
-****************************************************************************/
-void x86emuOp_jump_near_P(u8 X86EMU_UNUSED(op1))
-{
- s8 offset;
- u16 target;
-
- /* jump to byte offset if parity flag is set (even parity) */
- START_OF_INSTR();
- DECODE_PRINTF("JP\t");
- offset = (s8)fetch_byte_imm();
- target = (u16)(M.x86.R_IP + (s16)offset);
- DECODE_PRINTF2("%x\n", target);
- TRACE_AND_STEP();
- if (ACCESS_FLAG(F_PF))
- M.x86.R_IP = target;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x7b
-****************************************************************************/
-void x86emuOp_jump_near_NP(u8 X86EMU_UNUSED(op1))
-{
- s8 offset;
- u16 target;
-
- /* jump to byte offset if parity flag is clear (odd parity) */
- START_OF_INSTR();
- DECODE_PRINTF("JNP\t");
- offset = (s8)fetch_byte_imm();
- target = (u16)(M.x86.R_IP + (s16)offset);
- DECODE_PRINTF2("%x\n", target);
- TRACE_AND_STEP();
- if (!ACCESS_FLAG(F_PF))
- M.x86.R_IP = target;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x7c
-****************************************************************************/
-void x86emuOp_jump_near_L(u8 X86EMU_UNUSED(op1))
-{
- s8 offset;
- u16 target;
- int sf, of;
-
- /* jump to byte offset if sign flag not equal to overflow flag. */
- START_OF_INSTR();
- DECODE_PRINTF("JL\t");
- offset = (s8)fetch_byte_imm();
- target = (u16)(M.x86.R_IP + (s16)offset);
- DECODE_PRINTF2("%x\n", target);
- TRACE_AND_STEP();
- sf = ACCESS_FLAG(F_SF) != 0;
- of = ACCESS_FLAG(F_OF) != 0;
- if (sf ^ of)
- M.x86.R_IP = target;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x7d
-****************************************************************************/
-void x86emuOp_jump_near_NL(u8 X86EMU_UNUSED(op1))
-{
- s8 offset;
- u16 target;
- int sf, of;
-
- /* jump to byte offset if sign flag not equal to overflow flag. */
- START_OF_INSTR();
- DECODE_PRINTF("JNL\t");
- offset = (s8)fetch_byte_imm();
- target = (u16)(M.x86.R_IP + (s16)offset);
- DECODE_PRINTF2("%x\n", target);
- TRACE_AND_STEP();
- sf = ACCESS_FLAG(F_SF) != 0;
- of = ACCESS_FLAG(F_OF) != 0;
- /* note: inverse of above, but using == instead of xor. */
- if (sf == of)
- M.x86.R_IP = target;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x7e
-****************************************************************************/
-void x86emuOp_jump_near_LE(u8 X86EMU_UNUSED(op1))
-{
- s8 offset;
- u16 target;
- int sf, of;
-
- /* jump to byte offset if sign flag not equal to overflow flag
- or the zero flag is set */
- START_OF_INSTR();
- DECODE_PRINTF("JLE\t");
- offset = (s8)fetch_byte_imm();
- target = (u16)(M.x86.R_IP + (s16)offset);
- DECODE_PRINTF2("%x\n", target);
- TRACE_AND_STEP();
- sf = ACCESS_FLAG(F_SF) != 0;
- of = ACCESS_FLAG(F_OF) != 0;
- if ((sf ^ of) || ACCESS_FLAG(F_ZF))
- M.x86.R_IP = target;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x7f
-****************************************************************************/
-void x86emuOp_jump_near_NLE(u8 X86EMU_UNUSED(op1))
-{
- s8 offset;
- u16 target;
- int sf, of;
-
- /* jump to byte offset if sign flag equal to overflow flag.
- and the zero flag is clear */
- START_OF_INSTR();
- DECODE_PRINTF("JNLE\t");
- offset = (s8)fetch_byte_imm();
- target = (u16)(M.x86.R_IP + (s16)offset);
- DECODE_PRINTF2("%x\n", target);
- TRACE_AND_STEP();
- sf = ACCESS_FLAG(F_SF) != 0;
- of = ACCESS_FLAG(F_OF) != 0;
- if ((sf == of) && !ACCESS_FLAG(F_ZF))
- M.x86.R_IP = target;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-static u8 (*opc80_byte_operation[])(u8 d, u8 s) =
-{
- add_byte, /* 00 */
- or_byte, /* 01 */
- adc_byte, /* 02 */
- sbb_byte, /* 03 */
- and_byte, /* 04 */
- sub_byte, /* 05 */
- xor_byte, /* 06 */
- cmp_byte, /* 07 */
-};
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x80
-****************************************************************************/
-void x86emuOp_opc80_byte_RM_IMM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg;
- uint destoffset;
- u8 imm;
- u8 destval;
-
- /*
- * Weirdo special case instruction format. Part of the opcode
- * held below in "RH". Doubly nested case would result, except
- * that the decoded instruction
- */
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
- if (DEBUG_DECODE()) {
- /* XXX DECODE_PRINTF may be changed to something more
- general, so that it is important to leave the strings
- in the same format, even though the result is that the
- above test is done twice. */
-
- switch (rh) {
- case 0:
- DECODE_PRINTF("ADD\t");
- break;
- case 1:
- DECODE_PRINTF("OR\t");
- break;
- case 2:
- DECODE_PRINTF("ADC\t");
- break;
- case 3:
- DECODE_PRINTF("SBB\t");
- break;
- case 4:
- DECODE_PRINTF("AND\t");
- break;
- case 5:
- DECODE_PRINTF("SUB\t");
- break;
- case 6:
- DECODE_PRINTF("XOR\t");
- break;
- case 7:
- DECODE_PRINTF("CMP\t");
- break;
- }
- }
-#endif
- /* know operation, decode the mod byte to find the addressing
- mode. */
- switch (mod) {
- case 0:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- imm = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc80_byte_operation[rh]) (destval, imm);
- if (rh != 7)
- store_data_byte(destoffset, destval);
- break;
- case 1:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- imm = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc80_byte_operation[rh]) (destval, imm);
- if (rh != 7)
- store_data_byte(destoffset, destval);
- break;
- case 2:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- imm = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc80_byte_operation[rh]) (destval, imm);
- if (rh != 7)
- store_data_byte(destoffset, destval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF(",");
- imm = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc80_byte_operation[rh]) (*destreg, imm);
- if (rh != 7)
- *destreg = destval;
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-static u16 (*opc81_word_operation[])(u16 d, u16 s) =
-{
- add_word, /*00 */
- or_word, /*01 */
- adc_word, /*02 */
- sbb_word, /*03 */
- and_word, /*04 */
- sub_word, /*05 */
- xor_word, /*06 */
- cmp_word, /*07 */
-};
-
-static u32 (*opc81_long_operation[])(u32 d, u32 s) =
-{
- add_long, /*00 */
- or_long, /*01 */
- adc_long, /*02 */
- sbb_long, /*03 */
- and_long, /*04 */
- sub_long, /*05 */
- xor_long, /*06 */
- cmp_long, /*07 */
-};
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x81
-****************************************************************************/
-void x86emuOp_opc81_word_RM_IMM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
-
- /*
- * Weirdo special case instruction format. Part of the opcode
- * held below in "RH". Doubly nested case would result, except
- * that the decoded instruction
- */
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
- if (DEBUG_DECODE()) {
- /* XXX DECODE_PRINTF may be changed to something more
- general, so that it is important to leave the strings
- in the same format, even though the result is that the
- above test is done twice. */
-
- switch (rh) {
- case 0:
- DECODE_PRINTF("ADD\t");
- break;
- case 1:
- DECODE_PRINTF("OR\t");
- break;
- case 2:
- DECODE_PRINTF("ADC\t");
- break;
- case 3:
- DECODE_PRINTF("SBB\t");
- break;
- case 4:
- DECODE_PRINTF("AND\t");
- break;
- case 5:
- DECODE_PRINTF("SUB\t");
- break;
- case 6:
- DECODE_PRINTF("XOR\t");
- break;
- case 7:
- DECODE_PRINTF("CMP\t");
- break;
- }
- }
-#endif
- /*
- * Know operation, decode the mod byte to find the addressing
- * mode.
- */
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval,imm;
-
- DECODE_PRINTF("DWORD PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- imm = fetch_long_imm();
- DECODE_PRINTF2("%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc81_long_operation[rh]) (destval, imm);
- if (rh != 7)
- store_data_long(destoffset, destval);
- } else {
- u16 destval,imm;
-
- DECODE_PRINTF("WORD PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- imm = fetch_word_imm();
- DECODE_PRINTF2("%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc81_word_operation[rh]) (destval, imm);
- if (rh != 7)
- store_data_word(destoffset, destval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval,imm;
-
- DECODE_PRINTF("DWORD PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- imm = fetch_long_imm();
- DECODE_PRINTF2("%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc81_long_operation[rh]) (destval, imm);
- if (rh != 7)
- store_data_long(destoffset, destval);
- } else {
- u16 destval,imm;
-
- DECODE_PRINTF("WORD PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- imm = fetch_word_imm();
- DECODE_PRINTF2("%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc81_word_operation[rh]) (destval, imm);
- if (rh != 7)
- store_data_word(destoffset, destval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval,imm;
-
- DECODE_PRINTF("DWORD PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- imm = fetch_long_imm();
- DECODE_PRINTF2("%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc81_long_operation[rh]) (destval, imm);
- if (rh != 7)
- store_data_long(destoffset, destval);
- } else {
- u16 destval,imm;
-
- DECODE_PRINTF("WORD PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- imm = fetch_word_imm();
- DECODE_PRINTF2("%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc81_word_operation[rh]) (destval, imm);
- if (rh != 7)
- store_data_word(destoffset, destval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 destval,imm;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- imm = fetch_long_imm();
- DECODE_PRINTF2("%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc81_long_operation[rh]) (*destreg, imm);
- if (rh != 7)
- *destreg = destval;
- } else {
- u16 *destreg;
- u16 destval,imm;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- imm = fetch_word_imm();
- DECODE_PRINTF2("%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc81_word_operation[rh]) (*destreg, imm);
- if (rh != 7)
- *destreg = destval;
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-static u8 (*opc82_byte_operation[])(u8 s, u8 d) =
-{
- add_byte, /*00 */
- or_byte, /*01 */ /*YYY UNUSED ???? */
- adc_byte, /*02 */
- sbb_byte, /*03 */
- and_byte, /*04 */ /*YYY UNUSED ???? */
- sub_byte, /*05 */
- xor_byte, /*06 */ /*YYY UNUSED ???? */
- cmp_byte, /*07 */
-};
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x82
-****************************************************************************/
-void x86emuOp_opc82_byte_RM_IMM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg;
- uint destoffset;
- u8 imm;
- u8 destval;
-
- /*
- * Weirdo special case instruction format. Part of the opcode
- * held below in "RH". Doubly nested case would result, except
- * that the decoded instruction Similar to opcode 81, except that
- * the immediate byte is sign extended to a word length.
- */
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
- if (DEBUG_DECODE()) {
- /* XXX DECODE_PRINTF may be changed to something more
- general, so that it is important to leave the strings
- in the same format, even though the result is that the
- above test is done twice. */
- switch (rh) {
- case 0:
- DECODE_PRINTF("ADD\t");
- break;
- case 1:
- DECODE_PRINTF("OR\t");
- break;
- case 2:
- DECODE_PRINTF("ADC\t");
- break;
- case 3:
- DECODE_PRINTF("SBB\t");
- break;
- case 4:
- DECODE_PRINTF("AND\t");
- break;
- case 5:
- DECODE_PRINTF("SUB\t");
- break;
- case 6:
- DECODE_PRINTF("XOR\t");
- break;
- case 7:
- DECODE_PRINTF("CMP\t");
- break;
- }
- }
-#endif
- /* know operation, decode the mod byte to find the addressing
- mode. */
- switch (mod) {
- case 0:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm00_address(rl);
- destval = fetch_data_byte(destoffset);
- imm = fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc82_byte_operation[rh]) (destval, imm);
- if (rh != 7)
- store_data_byte(destoffset, destval);
- break;
- case 1:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm01_address(rl);
- destval = fetch_data_byte(destoffset);
- imm = fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc82_byte_operation[rh]) (destval, imm);
- if (rh != 7)
- store_data_byte(destoffset, destval);
- break;
- case 2:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm10_address(rl);
- destval = fetch_data_byte(destoffset);
- imm = fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc82_byte_operation[rh]) (destval, imm);
- if (rh != 7)
- store_data_byte(destoffset, destval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- imm = fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc82_byte_operation[rh]) (*destreg, imm);
- if (rh != 7)
- *destreg = destval;
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-static u16 (*opc83_word_operation[])(u16 s, u16 d) =
-{
- add_word, /*00 */
- or_word, /*01 */ /*YYY UNUSED ???? */
- adc_word, /*02 */
- sbb_word, /*03 */
- and_word, /*04 */ /*YYY UNUSED ???? */
- sub_word, /*05 */
- xor_word, /*06 */ /*YYY UNUSED ???? */
- cmp_word, /*07 */
-};
-
-static u32 (*opc83_long_operation[])(u32 s, u32 d) =
-{
- add_long, /*00 */
- or_long, /*01 */ /*YYY UNUSED ???? */
- adc_long, /*02 */
- sbb_long, /*03 */
- and_long, /*04 */ /*YYY UNUSED ???? */
- sub_long, /*05 */
- xor_long, /*06 */ /*YYY UNUSED ???? */
- cmp_long, /*07 */
-};
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x83
-****************************************************************************/
-void x86emuOp_opc83_word_RM_IMM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
-
- /*
- * Weirdo special case instruction format. Part of the opcode
- * held below in "RH". Doubly nested case would result, except
- * that the decoded instruction Similar to opcode 81, except that
- * the immediate byte is sign extended to a word length.
- */
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
- if (DEBUG_DECODE()) {
- /* XXX DECODE_PRINTF may be changed to something more
- general, so that it is important to leave the strings
- in the same format, even though the result is that the
- above test is done twice. */
- switch (rh) {
- case 0:
- DECODE_PRINTF("ADD\t");
- break;
- case 1:
- DECODE_PRINTF("OR\t");
- break;
- case 2:
- DECODE_PRINTF("ADC\t");
- break;
- case 3:
- DECODE_PRINTF("SBB\t");
- break;
- case 4:
- DECODE_PRINTF("AND\t");
- break;
- case 5:
- DECODE_PRINTF("SUB\t");
- break;
- case 6:
- DECODE_PRINTF("XOR\t");
- break;
- case 7:
- DECODE_PRINTF("CMP\t");
- break;
- }
- }
-#endif
- /* know operation, decode the mod byte to find the addressing
- mode. */
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval,imm;
-
- DECODE_PRINTF("DWORD PTR ");
- destoffset = decode_rm00_address(rl);
- destval = fetch_data_long(destoffset);
- imm = (s8) fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc83_long_operation[rh]) (destval, imm);
- if (rh != 7)
- store_data_long(destoffset, destval);
- } else {
- u16 destval,imm;
-
- DECODE_PRINTF("WORD PTR ");
- destoffset = decode_rm00_address(rl);
- destval = fetch_data_word(destoffset);
- imm = (s8) fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc83_word_operation[rh]) (destval, imm);
- if (rh != 7)
- store_data_word(destoffset, destval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval,imm;
-
- DECODE_PRINTF("DWORD PTR ");
- destoffset = decode_rm01_address(rl);
- destval = fetch_data_long(destoffset);
- imm = (s8) fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc83_long_operation[rh]) (destval, imm);
- if (rh != 7)
- store_data_long(destoffset, destval);
- } else {
- u16 destval,imm;
-
- DECODE_PRINTF("WORD PTR ");
- destoffset = decode_rm01_address(rl);
- destval = fetch_data_word(destoffset);
- imm = (s8) fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc83_word_operation[rh]) (destval, imm);
- if (rh != 7)
- store_data_word(destoffset, destval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval,imm;
-
- DECODE_PRINTF("DWORD PTR ");
- destoffset = decode_rm10_address(rl);
- destval = fetch_data_long(destoffset);
- imm = (s8) fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc83_long_operation[rh]) (destval, imm);
- if (rh != 7)
- store_data_long(destoffset, destval);
- } else {
- u16 destval,imm;
-
- DECODE_PRINTF("WORD PTR ");
- destoffset = decode_rm10_address(rl);
- destval = fetch_data_word(destoffset);
- imm = (s8) fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc83_word_operation[rh]) (destval, imm);
- if (rh != 7)
- store_data_word(destoffset, destval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 destval,imm;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- imm = (s8) fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc83_long_operation[rh]) (*destreg, imm);
- if (rh != 7)
- *destreg = destval;
- } else {
- u16 *destreg;
- u16 destval,imm;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- imm = (s8) fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", imm);
- TRACE_AND_STEP();
- destval = (*opc83_word_operation[rh]) (*destreg, imm);
- if (rh != 7)
- *destreg = destval;
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x84
-****************************************************************************/
-void x86emuOp_test_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg, *srcreg;
- uint destoffset;
- u8 destval;
-
- START_OF_INSTR();
- DECODE_PRINTF("TEST\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- test_byte(destval, *srcreg);
- break;
- case 1:
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- test_byte(destval, *srcreg);
- break;
- case 2:
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- test_byte(destval, *srcreg);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- test_byte(*destreg, *srcreg);
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x85
-****************************************************************************/
-void x86emuOp_test_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("TEST\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- test_long(destval, *srcreg);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- test_word(destval, *srcreg);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- test_long(destval, *srcreg);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- test_word(destval, *srcreg);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *srcreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- test_long(destval, *srcreg);
- } else {
- u16 destval;
- u16 *srcreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- test_word(destval, *srcreg);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- test_long(*destreg, *srcreg);
- } else {
- u16 *destreg,*srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- test_word(*destreg, *srcreg);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x86
-****************************************************************************/
-void x86emuOp_xchg_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg, *srcreg;
- uint destoffset;
- u8 destval;
- u8 tmp;
-
- START_OF_INSTR();
- DECODE_PRINTF("XCHG\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- tmp = *srcreg;
- *srcreg = destval;
- destval = tmp;
- store_data_byte(destoffset, destval);
- break;
- case 1:
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- tmp = *srcreg;
- *srcreg = destval;
- destval = tmp;
- store_data_byte(destoffset, destval);
- break;
- case 2:
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_byte(destoffset);
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- tmp = *srcreg;
- *srcreg = destval;
- destval = tmp;
- store_data_byte(destoffset, destval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- tmp = *srcreg;
- *srcreg = *destreg;
- *destreg = tmp;
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x87
-****************************************************************************/
-void x86emuOp_xchg_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("XCHG\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *srcreg;
- u32 destval,tmp;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- tmp = *srcreg;
- *srcreg = destval;
- destval = tmp;
- store_data_long(destoffset, destval);
- } else {
- u16 *srcreg;
- u16 destval,tmp;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- tmp = *srcreg;
- *srcreg = destval;
- destval = tmp;
- store_data_word(destoffset, destval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *srcreg;
- u32 destval,tmp;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- tmp = *srcreg;
- *srcreg = destval;
- destval = tmp;
- store_data_long(destoffset, destval);
- } else {
- u16 *srcreg;
- u16 destval,tmp;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- tmp = *srcreg;
- *srcreg = destval;
- destval = tmp;
- store_data_word(destoffset, destval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *srcreg;
- u32 destval,tmp;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_long(destoffset);
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- tmp = *srcreg;
- *srcreg = destval;
- destval = tmp;
- store_data_long(destoffset, destval);
- } else {
- u16 *srcreg;
- u16 destval,tmp;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- destval = fetch_data_word(destoffset);
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- tmp = *srcreg;
- *srcreg = destval;
- destval = tmp;
- store_data_word(destoffset, destval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
- u32 tmp;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- tmp = *srcreg;
- *srcreg = *destreg;
- *destreg = tmp;
- } else {
- u16 *destreg,*srcreg;
- u16 tmp;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- tmp = *srcreg;
- *srcreg = *destreg;
- *destreg = tmp;
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x88
-****************************************************************************/
-void x86emuOp_mov_byte_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg, *srcreg;
- uint destoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOV\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- store_data_byte(destoffset, *srcreg);
- break;
- case 1:
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- store_data_byte(destoffset, *srcreg);
- break;
- case 2:
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- store_data_byte(destoffset, *srcreg);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = *srcreg;
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x89
-****************************************************************************/
-void x86emuOp_mov_word_RM_R(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOV\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *srcreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- store_data_long(destoffset, *srcreg);
- } else {
- u16 *srcreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- store_data_word(destoffset, *srcreg);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *srcreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- store_data_long(destoffset, *srcreg);
- } else {
- u16 *srcreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- store_data_word(destoffset, *srcreg);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *srcreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- store_data_long(destoffset, *srcreg);
- } else {
- u16 *srcreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- store_data_word(destoffset, *srcreg);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = *srcreg;
- } else {
- u16 *destreg,*srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = *srcreg;
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x8a
-****************************************************************************/
-void x86emuOp_mov_byte_R_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg, *srcreg;
- uint srcoffset;
- u8 srcval;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOV\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- break;
- case 1:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- break;
- case 2:
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = *srcreg;
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x8b
-****************************************************************************/
-void x86emuOp_mov_word_R_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint srcoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOV\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_long(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg, *srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = *srcreg;
- } else {
- u16 *destreg, *srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = *srcreg;
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x8c
-****************************************************************************/
-void x86emuOp_mov_word_RM_SR(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u16 *destreg, *srcreg;
- uint destoffset;
- u16 destval;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOV\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- srcreg = decode_rm_seg_register(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = *srcreg;
- store_data_word(destoffset, destval);
- break;
- case 1:
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- srcreg = decode_rm_seg_register(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = *srcreg;
- store_data_word(destoffset, destval);
- break;
- case 2:
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- srcreg = decode_rm_seg_register(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = *srcreg;
- store_data_word(destoffset, destval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- srcreg = decode_rm_seg_register(rh);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = *srcreg;
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x8d
-****************************************************************************/
-void x86emuOp_lea_word_R_M(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u16 *srcreg;
- uint destoffset;
-
-/*
- * TODO: Need to handle address size prefix!
- *
- * lea eax,[eax+ebx*2] ??
- */
-
- START_OF_INSTR();
- DECODE_PRINTF("LEA\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *srcreg = (u16)destoffset;
- break;
- case 1:
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *srcreg = (u16)destoffset;
- break;
- case 2:
- srcreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *srcreg = (u16)destoffset;
- break;
- case 3: /* register to register */
- /* undefined. Do nothing. */
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x8e
-****************************************************************************/
-void x86emuOp_mov_word_SR_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u16 *destreg, *srcreg;
- uint srcoffset;
- u16 srcval;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOV\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destreg = decode_rm_seg_register(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- break;
- case 1:
- destreg = decode_rm_seg_register(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- break;
- case 2:
- destreg = decode_rm_seg_register(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- break;
- case 3: /* register to register */
- destreg = decode_rm_seg_register(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = *srcreg;
- break;
- }
- /*
- * Clean up, and reset all the R_xSP pointers to the correct
- * locations. This is about 3x too much overhead (doing all the
- * segreg ptrs when only one is needed, but this instruction
- * *cannot* be that common, and this isn't too much work anyway.
- */
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x8f
-****************************************************************************/
-void x86emuOp_pop_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("POP\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- if (rh != 0) {
- DECODE_PRINTF("ILLEGAL DECODE OF OPCODE 8F\n");
- HALT_SYS();
- }
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = pop_long();
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = pop_word();
- store_data_word(destoffset, destval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = pop_long();
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = pop_word();
- store_data_word(destoffset, destval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = pop_long();
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- destval = pop_word();
- store_data_word(destoffset, destval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = pop_long();
- } else {
- u16 *destreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = pop_word();
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x90
-****************************************************************************/
-void x86emuOp_nop(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("NOP\n");
- TRACE_AND_STEP();
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x91
-****************************************************************************/
-void x86emuOp_xchg_word_AX_CX(u8 X86EMU_UNUSED(op1))
-{
- u32 tmp;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("XCHG\tEAX,ECX\n");
- } else {
- DECODE_PRINTF("XCHG\tAX,CX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- tmp = M.x86.R_EAX;
- M.x86.R_EAX = M.x86.R_ECX;
- M.x86.R_ECX = tmp;
- } else {
- tmp = M.x86.R_AX;
- M.x86.R_AX = M.x86.R_CX;
- M.x86.R_CX = (u16)tmp;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x92
-****************************************************************************/
-void x86emuOp_xchg_word_AX_DX(u8 X86EMU_UNUSED(op1))
-{
- u32 tmp;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("XCHG\tEAX,EDX\n");
- } else {
- DECODE_PRINTF("XCHG\tAX,DX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- tmp = M.x86.R_EAX;
- M.x86.R_EAX = M.x86.R_EDX;
- M.x86.R_EDX = tmp;
- } else {
- tmp = M.x86.R_AX;
- M.x86.R_AX = M.x86.R_DX;
- M.x86.R_DX = (u16)tmp;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x93
-****************************************************************************/
-void x86emuOp_xchg_word_AX_BX(u8 X86EMU_UNUSED(op1))
-{
- u32 tmp;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("XCHG\tEAX,EBX\n");
- } else {
- DECODE_PRINTF("XCHG\tAX,BX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- tmp = M.x86.R_EAX;
- M.x86.R_EAX = M.x86.R_EBX;
- M.x86.R_EBX = tmp;
- } else {
- tmp = M.x86.R_AX;
- M.x86.R_AX = M.x86.R_BX;
- M.x86.R_BX = (u16)tmp;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x94
-****************************************************************************/
-void x86emuOp_xchg_word_AX_SP(u8 X86EMU_UNUSED(op1))
-{
- u32 tmp;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("XCHG\tEAX,ESP\n");
- } else {
- DECODE_PRINTF("XCHG\tAX,SP\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- tmp = M.x86.R_EAX;
- M.x86.R_EAX = M.x86.R_ESP;
- M.x86.R_ESP = tmp;
- } else {
- tmp = M.x86.R_AX;
- M.x86.R_AX = M.x86.R_SP;
- M.x86.R_SP = (u16)tmp;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x95
-****************************************************************************/
-void x86emuOp_xchg_word_AX_BP(u8 X86EMU_UNUSED(op1))
-{
- u32 tmp;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("XCHG\tEAX,EBP\n");
- } else {
- DECODE_PRINTF("XCHG\tAX,BP\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- tmp = M.x86.R_EAX;
- M.x86.R_EAX = M.x86.R_EBP;
- M.x86.R_EBP = tmp;
- } else {
- tmp = M.x86.R_AX;
- M.x86.R_AX = M.x86.R_BP;
- M.x86.R_BP = (u16)tmp;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x96
-****************************************************************************/
-void x86emuOp_xchg_word_AX_SI(u8 X86EMU_UNUSED(op1))
-{
- u32 tmp;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("XCHG\tEAX,ESI\n");
- } else {
- DECODE_PRINTF("XCHG\tAX,SI\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- tmp = M.x86.R_EAX;
- M.x86.R_EAX = M.x86.R_ESI;
- M.x86.R_ESI = tmp;
- } else {
- tmp = M.x86.R_AX;
- M.x86.R_AX = M.x86.R_SI;
- M.x86.R_SI = (u16)tmp;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x97
-****************************************************************************/
-void x86emuOp_xchg_word_AX_DI(u8 X86EMU_UNUSED(op1))
-{
- u32 tmp;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("XCHG\tEAX,EDI\n");
- } else {
- DECODE_PRINTF("XCHG\tAX,DI\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- tmp = M.x86.R_EAX;
- M.x86.R_EAX = M.x86.R_EDI;
- M.x86.R_EDI = tmp;
- } else {
- tmp = M.x86.R_AX;
- M.x86.R_AX = M.x86.R_DI;
- M.x86.R_DI = (u16)tmp;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x98
-****************************************************************************/
-void x86emuOp_cbw(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("CWDE\n");
- } else {
- DECODE_PRINTF("CBW\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- if (M.x86.R_AX & 0x8000) {
- M.x86.R_EAX |= 0xffff0000;
- } else {
- M.x86.R_EAX &= 0x0000ffff;
- }
- } else {
- if (M.x86.R_AL & 0x80) {
- M.x86.R_AH = 0xff;
- } else {
- M.x86.R_AH = 0x0;
- }
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x99
-****************************************************************************/
-void x86emuOp_cwd(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("CDQ\n");
- } else {
- DECODE_PRINTF("CWD\n");
- }
- DECODE_PRINTF("CWD\n");
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- if (M.x86.R_EAX & 0x80000000) {
- M.x86.R_EDX = 0xffffffff;
- } else {
- M.x86.R_EDX = 0x0;
- }
- } else {
- if (M.x86.R_AX & 0x8000) {
- M.x86.R_DX = 0xffff;
- } else {
- M.x86.R_DX = 0x0;
- }
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x9a
-****************************************************************************/
-void x86emuOp_call_far_IMM(u8 X86EMU_UNUSED(op1))
-{
- u16 farseg, faroff;
-
- START_OF_INSTR();
- DECODE_PRINTF("CALL\t");
- faroff = fetch_word_imm();
- farseg = fetch_word_imm();
- DECODE_PRINTF2("%04x:", farseg);
- DECODE_PRINTF2("%04x\n", faroff);
- CALL_TRACE(M.x86.saved_cs, M.x86.saved_ip, farseg, faroff, "FAR ");
-
- /* XXX
- *
- * Hooked interrupt vectors calling into our "BIOS" will cause
- * problems unless all intersegment stuff is checked for BIOS
- * access. Check needed here. For moment, let it alone.
- */
- TRACE_AND_STEP();
- push_word(M.x86.R_CS);
- M.x86.R_CS = farseg;
- push_word(M.x86.R_IP);
- M.x86.R_IP = faroff;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x9b
-****************************************************************************/
-void x86emuOp_wait(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("WAIT");
- TRACE_AND_STEP();
- /* NADA. */
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x9c
-****************************************************************************/
-void x86emuOp_pushf_word(u8 X86EMU_UNUSED(op1))
-{
- u32 flags;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("PUSHFD\n");
- } else {
- DECODE_PRINTF("PUSHF\n");
- }
- TRACE_AND_STEP();
-
- /* clear out *all* bits not representing flags, and turn on real bits */
- flags = (M.x86.R_EFLG & F_MSK) | F_ALWAYS_ON;
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- push_long(flags);
- } else {
- push_word((u16)flags);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x9d
-****************************************************************************/
-void x86emuOp_popf_word(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("POPFD\n");
- } else {
- DECODE_PRINTF("POPF\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EFLG = pop_long();
- } else {
- M.x86.R_FLG = pop_word();
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x9e
-****************************************************************************/
-void x86emuOp_sahf(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("SAHF\n");
- TRACE_AND_STEP();
- /* clear the lower bits of the flag register */
- M.x86.R_FLG &= 0xffffff00;
- /* or in the AH register into the flags register */
- M.x86.R_FLG |= M.x86.R_AH;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x9f
-****************************************************************************/
-void x86emuOp_lahf(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("LAHF\n");
- TRACE_AND_STEP();
- M.x86.R_AH = (u8)(M.x86.R_FLG & 0xff);
- /*undocumented TC++ behavior??? Nope. It's documented, but
- you have too look real hard to notice it. */
- M.x86.R_AH |= 0x2;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xa0
-****************************************************************************/
-void x86emuOp_mov_AL_M_IMM(u8 X86EMU_UNUSED(op1))
-{
- u16 offset;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOV\tAL,");
- offset = fetch_word_imm();
- DECODE_PRINTF2("[%04x]\n", offset);
- TRACE_AND_STEP();
- M.x86.R_AL = fetch_data_byte(offset);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xa1
-****************************************************************************/
-void x86emuOp_mov_AX_M_IMM(u8 X86EMU_UNUSED(op1))
-{
- u16 offset;
-
- START_OF_INSTR();
- offset = fetch_word_imm();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF2("MOV\tEAX,[%04x]\n", offset);
- } else {
- DECODE_PRINTF2("MOV\tAX,[%04x]\n", offset);
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EAX = fetch_data_long(offset);
- } else {
- M.x86.R_AX = fetch_data_word(offset);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xa2
-****************************************************************************/
-void x86emuOp_mov_M_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
- u16 offset;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOV\t");
- offset = fetch_word_imm();
- DECODE_PRINTF2("[%04x],AL\n", offset);
- TRACE_AND_STEP();
- store_data_byte(offset, M.x86.R_AL);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xa3
-****************************************************************************/
-void x86emuOp_mov_M_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
- u16 offset;
-
- START_OF_INSTR();
- offset = fetch_word_imm();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF2("MOV\t[%04x],EAX\n", offset);
- } else {
- DECODE_PRINTF2("MOV\t[%04x],AX\n", offset);
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- store_data_long(offset, M.x86.R_EAX);
- } else {
- store_data_word(offset, M.x86.R_AX);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xa4
-****************************************************************************/
-void x86emuOp_movs_byte(u8 X86EMU_UNUSED(op1))
-{
- u8 val;
- u32 count;
- int inc;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOVS\tBYTE\n");
- if (ACCESS_FLAG(F_DF)) /* down */
- inc = -1;
- else
- inc = 1;
- TRACE_AND_STEP();
- count = 1;
- if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
- /* dont care whether REPE or REPNE */
- /* move them until CX is ZERO. */
- count = M.x86.R_CX;
- M.x86.R_CX = 0;
- M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
- }
- while (count--) {
- val = fetch_data_byte(M.x86.R_SI);
- store_data_byte_abs(M.x86.R_ES, M.x86.R_DI, val);
- M.x86.R_SI += inc;
- M.x86.R_DI += inc;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xa5
-****************************************************************************/
-void x86emuOp_movs_word(u8 X86EMU_UNUSED(op1))
-{
- u32 val;
- int inc;
- u32 count;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("MOVS\tDWORD\n");
- if (ACCESS_FLAG(F_DF)) /* down */
- inc = -4;
- else
- inc = 4;
- } else {
- DECODE_PRINTF("MOVS\tWORD\n");
- if (ACCESS_FLAG(F_DF)) /* down */
- inc = -2;
- else
- inc = 2;
- }
- TRACE_AND_STEP();
- count = 1;
- if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
- /* dont care whether REPE or REPNE */
- /* move them until CX is ZERO. */
- count = M.x86.R_CX;
- M.x86.R_CX = 0;
- M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
- }
- while (count--) {
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- val = fetch_data_long(M.x86.R_SI);
- store_data_long_abs(M.x86.R_ES, M.x86.R_DI, val);
- } else {
- val = fetch_data_word(M.x86.R_SI);
- store_data_word_abs(M.x86.R_ES, M.x86.R_DI, (u16)val);
- }
- M.x86.R_SI += inc;
- M.x86.R_DI += inc;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xa6
-****************************************************************************/
-void x86emuOp_cmps_byte(u8 X86EMU_UNUSED(op1))
-{
- s8 val1, val2;
- int inc;
-
- START_OF_INSTR();
- DECODE_PRINTF("CMPS\tBYTE\n");
- TRACE_AND_STEP();
- if (ACCESS_FLAG(F_DF)) /* down */
- inc = -1;
- else
- inc = 1;
-
- if (M.x86.mode & SYSMODE_PREFIX_REPE) {
- /* REPE */
- /* move them until CX is ZERO. */
- while (M.x86.R_CX != 0) {
- val1 = fetch_data_byte(M.x86.R_SI);
- val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI);
- cmp_byte(val1, val2);
- M.x86.R_CX -= 1;
- M.x86.R_SI += inc;
- M.x86.R_DI += inc;
- if (ACCESS_FLAG(F_ZF) == 0)
- break;
- }
- M.x86.mode &= ~SYSMODE_PREFIX_REPE;
- } else if (M.x86.mode & SYSMODE_PREFIX_REPNE) {
- /* REPNE */
- /* move them until CX is ZERO. */
- while (M.x86.R_CX != 0) {
- val1 = fetch_data_byte(M.x86.R_SI);
- val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI);
- cmp_byte(val1, val2);
- M.x86.R_CX -= 1;
- M.x86.R_SI += inc;
- M.x86.R_DI += inc;
- if (ACCESS_FLAG(F_ZF))
- break; /* zero flag set means equal */
- }
- M.x86.mode &= ~SYSMODE_PREFIX_REPNE;
- } else {
- val1 = fetch_data_byte(M.x86.R_SI);
- val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI);
- cmp_byte(val1, val2);
- M.x86.R_SI += inc;
- M.x86.R_DI += inc;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xa7
-****************************************************************************/
-void x86emuOp_cmps_word(u8 X86EMU_UNUSED(op1))
-{
- u32 val1,val2;
- int inc;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("CMPS\tDWORD\n");
- if (ACCESS_FLAG(F_DF)) /* down */
- inc = -4;
- else
- inc = 4;
- } else {
- DECODE_PRINTF("CMPS\tWORD\n");
- if (ACCESS_FLAG(F_DF)) /* down */
- inc = -2;
- else
- inc = 2;
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_REPE) {
- /* REPE */
- /* move them until CX is ZERO. */
- while (M.x86.R_CX != 0) {
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- val1 = fetch_data_long(M.x86.R_SI);
- val2 = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI);
- cmp_long(val1, val2);
- } else {
- val1 = fetch_data_word(M.x86.R_SI);
- val2 = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI);
- cmp_word((u16)val1, (u16)val2);
- }
- M.x86.R_CX -= 1;
- M.x86.R_SI += inc;
- M.x86.R_DI += inc;
- if (ACCESS_FLAG(F_ZF) == 0)
- break;
- }
- M.x86.mode &= ~SYSMODE_PREFIX_REPE;
- } else if (M.x86.mode & SYSMODE_PREFIX_REPNE) {
- /* REPNE */
- /* move them until CX is ZERO. */
- while (M.x86.R_CX != 0) {
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- val1 = fetch_data_long(M.x86.R_SI);
- val2 = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI);
- cmp_long(val1, val2);
- } else {
- val1 = fetch_data_word(M.x86.R_SI);
- val2 = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI);
- cmp_word((u16)val1, (u16)val2);
- }
- M.x86.R_CX -= 1;
- M.x86.R_SI += inc;
- M.x86.R_DI += inc;
- if (ACCESS_FLAG(F_ZF))
- break; /* zero flag set means equal */
- }
- M.x86.mode &= ~SYSMODE_PREFIX_REPNE;
- } else {
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- val1 = fetch_data_long(M.x86.R_SI);
- val2 = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI);
- cmp_long(val1, val2);
- } else {
- val1 = fetch_data_word(M.x86.R_SI);
- val2 = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI);
- cmp_word((u16)val1, (u16)val2);
- }
- M.x86.R_SI += inc;
- M.x86.R_DI += inc;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xa8
-****************************************************************************/
-void x86emuOp_test_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
- int imm;
-
- START_OF_INSTR();
- DECODE_PRINTF("TEST\tAL,");
- imm = fetch_byte_imm();
- DECODE_PRINTF2("%04x\n", imm);
- TRACE_AND_STEP();
- test_byte(M.x86.R_AL, (u8)imm);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xa9
-****************************************************************************/
-void x86emuOp_test_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
- u32 srcval;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("TEST\tEAX,");
- srcval = fetch_long_imm();
- } else {
- DECODE_PRINTF("TEST\tAX,");
- srcval = fetch_word_imm();
- }
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- test_long(M.x86.R_EAX, srcval);
- } else {
- test_word(M.x86.R_AX, (u16)srcval);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xaa
-****************************************************************************/
-void x86emuOp_stos_byte(u8 X86EMU_UNUSED(op1))
-{
- int inc;
-
- START_OF_INSTR();
- DECODE_PRINTF("STOS\tBYTE\n");
- if (ACCESS_FLAG(F_DF)) /* down */
- inc = -1;
- else
- inc = 1;
- TRACE_AND_STEP();
- if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
- /* dont care whether REPE or REPNE */
- /* move them until CX is ZERO. */
- while (M.x86.R_CX != 0) {
- store_data_byte_abs(M.x86.R_ES, M.x86.R_DI, M.x86.R_AL);
- M.x86.R_CX -= 1;
- M.x86.R_DI += inc;
- }
- M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
- } else {
- store_data_byte_abs(M.x86.R_ES, M.x86.R_DI, M.x86.R_AL);
- M.x86.R_DI += inc;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xab
-****************************************************************************/
-void x86emuOp_stos_word(u8 X86EMU_UNUSED(op1))
-{
- int inc;
- u32 count;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("STOS\tDWORD\n");
- if (ACCESS_FLAG(F_DF)) /* down */
- inc = -4;
- else
- inc = 4;
- } else {
- DECODE_PRINTF("STOS\tWORD\n");
- if (ACCESS_FLAG(F_DF)) /* down */
- inc = -2;
- else
- inc = 2;
- }
- TRACE_AND_STEP();
- count = 1;
- if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
- /* dont care whether REPE or REPNE */
- /* move them until CX is ZERO. */
- count = M.x86.R_CX;
- M.x86.R_CX = 0;
- M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
- }
- while (count--) {
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- store_data_long_abs(M.x86.R_ES, M.x86.R_DI, M.x86.R_EAX);
- } else {
- store_data_word_abs(M.x86.R_ES, M.x86.R_DI, M.x86.R_AX);
- }
- M.x86.R_DI += inc;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xac
-****************************************************************************/
-void x86emuOp_lods_byte(u8 X86EMU_UNUSED(op1))
-{
- int inc;
-
- START_OF_INSTR();
- DECODE_PRINTF("LODS\tBYTE\n");
- TRACE_AND_STEP();
- if (ACCESS_FLAG(F_DF)) /* down */
- inc = -1;
- else
- inc = 1;
- if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
- /* dont care whether REPE or REPNE */
- /* move them until CX is ZERO. */
- while (M.x86.R_CX != 0) {
- M.x86.R_AL = fetch_data_byte(M.x86.R_SI);
- M.x86.R_CX -= 1;
- M.x86.R_SI += inc;
- }
- M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
- } else {
- M.x86.R_AL = fetch_data_byte(M.x86.R_SI);
- M.x86.R_SI += inc;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xad
-****************************************************************************/
-void x86emuOp_lods_word(u8 X86EMU_UNUSED(op1))
-{
- int inc;
- u32 count;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("LODS\tDWORD\n");
- if (ACCESS_FLAG(F_DF)) /* down */
- inc = -4;
- else
- inc = 4;
- } else {
- DECODE_PRINTF("LODS\tWORD\n");
- if (ACCESS_FLAG(F_DF)) /* down */
- inc = -2;
- else
- inc = 2;
- }
- TRACE_AND_STEP();
- count = 1;
- if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
- /* dont care whether REPE or REPNE */
- /* move them until CX is ZERO. */
- count = M.x86.R_CX;
- M.x86.R_CX = 0;
- M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
- }
- while (count--) {
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EAX = fetch_data_long(M.x86.R_SI);
- } else {
- M.x86.R_AX = fetch_data_word(M.x86.R_SI);
- }
- M.x86.R_SI += inc;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xae
-****************************************************************************/
-void x86emuOp_scas_byte(u8 X86EMU_UNUSED(op1))
-{
- s8 val2;
- int inc;
-
- START_OF_INSTR();
- DECODE_PRINTF("SCAS\tBYTE\n");
- TRACE_AND_STEP();
- if (ACCESS_FLAG(F_DF)) /* down */
- inc = -1;
- else
- inc = 1;
- if (M.x86.mode & SYSMODE_PREFIX_REPE) {
- /* REPE */
- /* move them until CX is ZERO. */
- while (M.x86.R_CX != 0) {
- val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI);
- cmp_byte(M.x86.R_AL, val2);
- M.x86.R_CX -= 1;
- M.x86.R_DI += inc;
- if (ACCESS_FLAG(F_ZF) == 0)
- break;
- }
- M.x86.mode &= ~SYSMODE_PREFIX_REPE;
- } else if (M.x86.mode & SYSMODE_PREFIX_REPNE) {
- /* REPNE */
- /* move them until CX is ZERO. */
- while (M.x86.R_CX != 0) {
- val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI);
- cmp_byte(M.x86.R_AL, val2);
- M.x86.R_CX -= 1;
- M.x86.R_DI += inc;
- if (ACCESS_FLAG(F_ZF))
- break; /* zero flag set means equal */
- }
- M.x86.mode &= ~SYSMODE_PREFIX_REPNE;
- } else {
- val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI);
- cmp_byte(M.x86.R_AL, val2);
- M.x86.R_DI += inc;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xaf
-****************************************************************************/
-void x86emuOp_scas_word(u8 X86EMU_UNUSED(op1))
-{
- int inc;
- u32 val;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("SCAS\tDWORD\n");
- if (ACCESS_FLAG(F_DF)) /* down */
- inc = -4;
- else
- inc = 4;
- } else {
- DECODE_PRINTF("SCAS\tWORD\n");
- if (ACCESS_FLAG(F_DF)) /* down */
- inc = -2;
- else
- inc = 2;
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_REPE) {
- /* REPE */
- /* move them until CX is ZERO. */
- while (M.x86.R_CX != 0) {
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- val = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI);
- cmp_long(M.x86.R_EAX, val);
- } else {
- val = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI);
- cmp_word(M.x86.R_AX, (u16)val);
- }
- M.x86.R_CX -= 1;
- M.x86.R_DI += inc;
- if (ACCESS_FLAG(F_ZF) == 0)
- break;
- }
- M.x86.mode &= ~SYSMODE_PREFIX_REPE;
- } else if (M.x86.mode & SYSMODE_PREFIX_REPNE) {
- /* REPNE */
- /* move them until CX is ZERO. */
- while (M.x86.R_CX != 0) {
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- val = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI);
- cmp_long(M.x86.R_EAX, val);
- } else {
- val = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI);
- cmp_word(M.x86.R_AX, (u16)val);
- }
- M.x86.R_CX -= 1;
- M.x86.R_DI += inc;
- if (ACCESS_FLAG(F_ZF))
- break; /* zero flag set means equal */
- }
- M.x86.mode &= ~SYSMODE_PREFIX_REPNE;
- } else {
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- val = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI);
- cmp_long(M.x86.R_EAX, val);
- } else {
- val = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI);
- cmp_word(M.x86.R_AX, (u16)val);
- }
- M.x86.R_DI += inc;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xb0
-****************************************************************************/
-void x86emuOp_mov_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
- u8 imm;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOV\tAL,");
- imm = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", imm);
- TRACE_AND_STEP();
- M.x86.R_AL = imm;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xb1
-****************************************************************************/
-void x86emuOp_mov_byte_CL_IMM(u8 X86EMU_UNUSED(op1))
-{
- u8 imm;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOV\tCL,");
- imm = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", imm);
- TRACE_AND_STEP();
- M.x86.R_CL = imm;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xb2
-****************************************************************************/
-void x86emuOp_mov_byte_DL_IMM(u8 X86EMU_UNUSED(op1))
-{
- u8 imm;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOV\tDL,");
- imm = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", imm);
- TRACE_AND_STEP();
- M.x86.R_DL = imm;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xb3
-****************************************************************************/
-void x86emuOp_mov_byte_BL_IMM(u8 X86EMU_UNUSED(op1))
-{
- u8 imm;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOV\tBL,");
- imm = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", imm);
- TRACE_AND_STEP();
- M.x86.R_BL = imm;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xb4
-****************************************************************************/
-void x86emuOp_mov_byte_AH_IMM(u8 X86EMU_UNUSED(op1))
-{
- u8 imm;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOV\tAH,");
- imm = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", imm);
- TRACE_AND_STEP();
- M.x86.R_AH = imm;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xb5
-****************************************************************************/
-void x86emuOp_mov_byte_CH_IMM(u8 X86EMU_UNUSED(op1))
-{
- u8 imm;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOV\tCH,");
- imm = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", imm);
- TRACE_AND_STEP();
- M.x86.R_CH = imm;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xb6
-****************************************************************************/
-void x86emuOp_mov_byte_DH_IMM(u8 X86EMU_UNUSED(op1))
-{
- u8 imm;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOV\tDH,");
- imm = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", imm);
- TRACE_AND_STEP();
- M.x86.R_DH = imm;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xb7
-****************************************************************************/
-void x86emuOp_mov_byte_BH_IMM(u8 X86EMU_UNUSED(op1))
-{
- u8 imm;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOV\tBH,");
- imm = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", imm);
- TRACE_AND_STEP();
- M.x86.R_BH = imm;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xb8
-****************************************************************************/
-void x86emuOp_mov_word_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
- u32 srcval;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("MOV\tEAX,");
- srcval = fetch_long_imm();
- } else {
- DECODE_PRINTF("MOV\tAX,");
- srcval = fetch_word_imm();
- }
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EAX = srcval;
- } else {
- M.x86.R_AX = (u16)srcval;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xb9
-****************************************************************************/
-void x86emuOp_mov_word_CX_IMM(u8 X86EMU_UNUSED(op1))
-{
- u32 srcval;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("MOV\tECX,");
- srcval = fetch_long_imm();
- } else {
- DECODE_PRINTF("MOV\tCX,");
- srcval = fetch_word_imm();
- }
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_ECX = srcval;
- } else {
- M.x86.R_CX = (u16)srcval;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xba
-****************************************************************************/
-void x86emuOp_mov_word_DX_IMM(u8 X86EMU_UNUSED(op1))
-{
- u32 srcval;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("MOV\tEDX,");
- srcval = fetch_long_imm();
- } else {
- DECODE_PRINTF("MOV\tDX,");
- srcval = fetch_word_imm();
- }
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EDX = srcval;
- } else {
- M.x86.R_DX = (u16)srcval;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xbb
-****************************************************************************/
-void x86emuOp_mov_word_BX_IMM(u8 X86EMU_UNUSED(op1))
-{
- u32 srcval;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("MOV\tEBX,");
- srcval = fetch_long_imm();
- } else {
- DECODE_PRINTF("MOV\tBX,");
- srcval = fetch_word_imm();
- }
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EBX = srcval;
- } else {
- M.x86.R_BX = (u16)srcval;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xbc
-****************************************************************************/
-void x86emuOp_mov_word_SP_IMM(u8 X86EMU_UNUSED(op1))
-{
- u32 srcval;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("MOV\tESP,");
- srcval = fetch_long_imm();
- } else {
- DECODE_PRINTF("MOV\tSP,");
- srcval = fetch_word_imm();
- }
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_ESP = srcval;
- } else {
- M.x86.R_SP = (u16)srcval;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xbd
-****************************************************************************/
-void x86emuOp_mov_word_BP_IMM(u8 X86EMU_UNUSED(op1))
-{
- u32 srcval;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("MOV\tEBP,");
- srcval = fetch_long_imm();
- } else {
- DECODE_PRINTF("MOV\tBP,");
- srcval = fetch_word_imm();
- }
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EBP = srcval;
- } else {
- M.x86.R_BP = (u16)srcval;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xbe
-****************************************************************************/
-void x86emuOp_mov_word_SI_IMM(u8 X86EMU_UNUSED(op1))
-{
- u32 srcval;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("MOV\tESI,");
- srcval = fetch_long_imm();
- } else {
- DECODE_PRINTF("MOV\tSI,");
- srcval = fetch_word_imm();
- }
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_ESI = srcval;
- } else {
- M.x86.R_SI = (u16)srcval;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xbf
-****************************************************************************/
-void x86emuOp_mov_word_DI_IMM(u8 X86EMU_UNUSED(op1))
-{
- u32 srcval;
-
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("MOV\tEDI,");
- srcval = fetch_long_imm();
- } else {
- DECODE_PRINTF("MOV\tDI,");
- srcval = fetch_word_imm();
- }
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EDI = srcval;
- } else {
- M.x86.R_DI = (u16)srcval;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/* used by opcodes c0, d0, and d2. */
-static u8(*opcD0_byte_operation[])(u8 d, u8 s) =
-{
- rol_byte,
- ror_byte,
- rcl_byte,
- rcr_byte,
- shl_byte,
- shr_byte,
- shl_byte, /* sal_byte === shl_byte by definition */
- sar_byte,
-};
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xc0
-****************************************************************************/
-void x86emuOp_opcC0_byte_RM_MEM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg;
- uint destoffset;
- u8 destval;
- u8 amt;
-
- /*
- * Yet another weirdo special case instruction format. Part of
- * the opcode held below in "RH". Doubly nested case would
- * result, except that the decoded instruction
- */
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
- if (DEBUG_DECODE()) {
- /* XXX DECODE_PRINTF may be changed to something more
- general, so that it is important to leave the strings
- in the same format, even though the result is that the
- above test is done twice. */
-
- switch (rh) {
- case 0:
- DECODE_PRINTF("ROL\t");
- break;
- case 1:
- DECODE_PRINTF("ROR\t");
- break;
- case 2:
- DECODE_PRINTF("RCL\t");
- break;
- case 3:
- DECODE_PRINTF("RCR\t");
- break;
- case 4:
- DECODE_PRINTF("SHL\t");
- break;
- case 5:
- DECODE_PRINTF("SHR\t");
- break;
- case 6:
- DECODE_PRINTF("SAL\t");
- break;
- case 7:
- DECODE_PRINTF("SAR\t");
- break;
- }
- }
-#endif
- /* know operation, decode the mod byte to find the addressing
- mode. */
- switch (mod) {
- case 0:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm00_address(rl);
- amt = fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", amt);
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD0_byte_operation[rh]) (destval, amt);
- store_data_byte(destoffset, destval);
- break;
- case 1:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm01_address(rl);
- amt = fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", amt);
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD0_byte_operation[rh]) (destval, amt);
- store_data_byte(destoffset, destval);
- break;
- case 2:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm10_address(rl);
- amt = fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", amt);
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD0_byte_operation[rh]) (destval, amt);
- store_data_byte(destoffset, destval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- amt = fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", amt);
- TRACE_AND_STEP();
- destval = (*opcD0_byte_operation[rh]) (*destreg, amt);
- *destreg = destval;
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/* used by opcodes c1, d1, and d3. */
-static u16(*opcD1_word_operation[])(u16 s, u8 d) =
-{
- rol_word,
- ror_word,
- rcl_word,
- rcr_word,
- shl_word,
- shr_word,
- shl_word, /* sal_byte === shl_byte by definition */
- sar_word,
-};
-
-/* used by opcodes c1, d1, and d3. */
-static u32 (*opcD1_long_operation[])(u32 s, u8 d) =
-{
- rol_long,
- ror_long,
- rcl_long,
- rcr_long,
- shl_long,
- shr_long,
- shl_long, /* sal_byte === shl_byte by definition */
- sar_long,
-};
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xc1
-****************************************************************************/
-void x86emuOp_opcC1_word_RM_MEM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
- u8 amt;
-
- /*
- * Yet another weirdo special case instruction format. Part of
- * the opcode held below in "RH". Doubly nested case would
- * result, except that the decoded instruction
- */
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
- if (DEBUG_DECODE()) {
- /* XXX DECODE_PRINTF may be changed to something more
- general, so that it is important to leave the strings
- in the same format, even though the result is that the
- above test is done twice. */
-
- switch (rh) {
- case 0:
- DECODE_PRINTF("ROL\t");
- break;
- case 1:
- DECODE_PRINTF("ROR\t");
- break;
- case 2:
- DECODE_PRINTF("RCL\t");
- break;
- case 3:
- DECODE_PRINTF("RCR\t");
- break;
- case 4:
- DECODE_PRINTF("SHL\t");
- break;
- case 5:
- DECODE_PRINTF("SHR\t");
- break;
- case 6:
- DECODE_PRINTF("SAL\t");
- break;
- case 7:
- DECODE_PRINTF("SAR\t");
- break;
- }
- }
-#endif
- /* know operation, decode the mod byte to find the addressing
- mode. */
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("DWORD PTR ");
- destoffset = decode_rm00_address(rl);
- amt = fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", amt);
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD1_long_operation[rh]) (destval, amt);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("WORD PTR ");
- destoffset = decode_rm00_address(rl);
- amt = fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", amt);
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD1_word_operation[rh]) (destval, amt);
- store_data_word(destoffset, destval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("DWORD PTR ");
- destoffset = decode_rm01_address(rl);
- amt = fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", amt);
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD1_long_operation[rh]) (destval, amt);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("WORD PTR ");
- destoffset = decode_rm01_address(rl);
- amt = fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", amt);
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD1_word_operation[rh]) (destval, amt);
- store_data_word(destoffset, destval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("DWORD PTR ");
- destoffset = decode_rm10_address(rl);
- amt = fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", amt);
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD1_long_operation[rh]) (destval, amt);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("WORD PTR ");
- destoffset = decode_rm10_address(rl);
- amt = fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", amt);
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD1_word_operation[rh]) (destval, amt);
- store_data_word(destoffset, destval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- amt = fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", amt);
- TRACE_AND_STEP();
- *destreg = (*opcD1_long_operation[rh]) (*destreg, amt);
- } else {
- u16 *destreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- amt = fetch_byte_imm();
- DECODE_PRINTF2(",%x\n", amt);
- TRACE_AND_STEP();
- *destreg = (*opcD1_word_operation[rh]) (*destreg, amt);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xc2
-****************************************************************************/
-void x86emuOp_ret_near_IMM(u8 X86EMU_UNUSED(op1))
-{
- u16 imm;
-
- START_OF_INSTR();
- DECODE_PRINTF("RET\t");
- imm = fetch_word_imm();
- DECODE_PRINTF2("%x\n", imm);
- RETURN_TRACE("RET",M.x86.saved_cs,M.x86.saved_ip);
- TRACE_AND_STEP();
- M.x86.R_IP = pop_word();
- M.x86.R_SP += imm;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xc3
-****************************************************************************/
-void x86emuOp_ret_near(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("RET\n");
- RETURN_TRACE("RET",M.x86.saved_cs,M.x86.saved_ip);
- TRACE_AND_STEP();
- M.x86.R_IP = pop_word();
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xc4
-****************************************************************************/
-void x86emuOp_les_R_IMM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rh, rl;
- u16 *dstreg;
- uint srcoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("LES\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *dstreg = fetch_data_word(srcoffset);
- M.x86.R_ES = fetch_data_word(srcoffset + 2);
- break;
- case 1:
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *dstreg = fetch_data_word(srcoffset);
- M.x86.R_ES = fetch_data_word(srcoffset + 2);
- break;
- case 2:
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *dstreg = fetch_data_word(srcoffset);
- M.x86.R_ES = fetch_data_word(srcoffset + 2);
- break;
- case 3: /* register to register */
- /* UNDEFINED! */
- TRACE_AND_STEP();
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xc5
-****************************************************************************/
-void x86emuOp_lds_R_IMM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rh, rl;
- u16 *dstreg;
- uint srcoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("LDS\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *dstreg = fetch_data_word(srcoffset);
- M.x86.R_DS = fetch_data_word(srcoffset + 2);
- break;
- case 1:
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *dstreg = fetch_data_word(srcoffset);
- M.x86.R_DS = fetch_data_word(srcoffset + 2);
- break;
- case 2:
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *dstreg = fetch_data_word(srcoffset);
- M.x86.R_DS = fetch_data_word(srcoffset + 2);
- break;
- case 3: /* register to register */
- /* UNDEFINED! */
- TRACE_AND_STEP();
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xc6
-****************************************************************************/
-void x86emuOp_mov_byte_RM_IMM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg;
- uint destoffset;
- u8 imm;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOV\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- if (rh != 0) {
- DECODE_PRINTF("ILLEGAL DECODE OF OPCODE c6\n");
- HALT_SYS();
- }
- switch (mod) {
- case 0:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm00_address(rl);
- imm = fetch_byte_imm();
- DECODE_PRINTF2(",%2x\n", imm);
- TRACE_AND_STEP();
- store_data_byte(destoffset, imm);
- break;
- case 1:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm01_address(rl);
- imm = fetch_byte_imm();
- DECODE_PRINTF2(",%2x\n", imm);
- TRACE_AND_STEP();
- store_data_byte(destoffset, imm);
- break;
- case 2:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm10_address(rl);
- imm = fetch_byte_imm();
- DECODE_PRINTF2(",%2x\n", imm);
- TRACE_AND_STEP();
- store_data_byte(destoffset, imm);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- imm = fetch_byte_imm();
- DECODE_PRINTF2(",%2x\n", imm);
- TRACE_AND_STEP();
- *destreg = imm;
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xc7
-****************************************************************************/
-void x86emuOp_mov_word_RM_IMM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOV\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- if (rh != 0) {
- DECODE_PRINTF("ILLEGAL DECODE OF OPCODE 8F\n");
- HALT_SYS();
- }
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 imm;
-
- DECODE_PRINTF("DWORD PTR ");
- destoffset = decode_rm00_address(rl);
- imm = fetch_long_imm();
- DECODE_PRINTF2(",%x\n", imm);
- TRACE_AND_STEP();
- store_data_long(destoffset, imm);
- } else {
- u16 imm;
-
- DECODE_PRINTF("WORD PTR ");
- destoffset = decode_rm00_address(rl);
- imm = fetch_word_imm();
- DECODE_PRINTF2(",%x\n", imm);
- TRACE_AND_STEP();
- store_data_word(destoffset, imm);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 imm;
-
- DECODE_PRINTF("DWORD PTR ");
- destoffset = decode_rm01_address(rl);
- imm = fetch_long_imm();
- DECODE_PRINTF2(",%x\n", imm);
- TRACE_AND_STEP();
- store_data_long(destoffset, imm);
- } else {
- u16 imm;
-
- DECODE_PRINTF("WORD PTR ");
- destoffset = decode_rm01_address(rl);
- imm = fetch_word_imm();
- DECODE_PRINTF2(",%x\n", imm);
- TRACE_AND_STEP();
- store_data_word(destoffset, imm);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 imm;
-
- DECODE_PRINTF("DWORD PTR ");
- destoffset = decode_rm10_address(rl);
- imm = fetch_long_imm();
- DECODE_PRINTF2(",%x\n", imm);
- TRACE_AND_STEP();
- store_data_long(destoffset, imm);
- } else {
- u16 imm;
-
- DECODE_PRINTF("WORD PTR ");
- destoffset = decode_rm10_address(rl);
- imm = fetch_word_imm();
- DECODE_PRINTF2(",%x\n", imm);
- TRACE_AND_STEP();
- store_data_word(destoffset, imm);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 imm;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- imm = fetch_long_imm();
- DECODE_PRINTF2(",%x\n", imm);
- TRACE_AND_STEP();
- *destreg = imm;
- } else {
- u16 *destreg;
- u16 imm;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- imm = fetch_word_imm();
- DECODE_PRINTF2(",%x\n", imm);
- TRACE_AND_STEP();
- *destreg = imm;
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xc8
-****************************************************************************/
-void x86emuOp_enter(u8 X86EMU_UNUSED(op1))
-{
- u16 local,frame_pointer;
- u8 nesting;
- int i;
-
- START_OF_INSTR();
- local = fetch_word_imm();
- nesting = fetch_byte_imm();
- DECODE_PRINTF2("ENTER %x\n", local);
- DECODE_PRINTF2(",%x\n", nesting);
- TRACE_AND_STEP();
- push_word(M.x86.R_BP);
- frame_pointer = M.x86.R_SP;
- if (nesting > 0) {
- for (i = 1; i < nesting; i++) {
- M.x86.R_BP -= 2;
- push_word(fetch_data_word_abs(M.x86.R_SS, M.x86.R_BP));
- }
- push_word(frame_pointer);
- }
- M.x86.R_BP = frame_pointer;
- M.x86.R_SP = (u16)(M.x86.R_SP - local);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xc9
-****************************************************************************/
-void x86emuOp_leave(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("LEAVE\n");
- TRACE_AND_STEP();
- M.x86.R_SP = M.x86.R_BP;
- M.x86.R_BP = pop_word();
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xca
-****************************************************************************/
-void x86emuOp_ret_far_IMM(u8 X86EMU_UNUSED(op1))
-{
- u16 imm;
-
- START_OF_INSTR();
- DECODE_PRINTF("RETF\t");
- imm = fetch_word_imm();
- DECODE_PRINTF2("%x\n", imm);
- RETURN_TRACE("RETF",M.x86.saved_cs,M.x86.saved_ip);
- TRACE_AND_STEP();
- M.x86.R_IP = pop_word();
- M.x86.R_CS = pop_word();
- M.x86.R_SP += imm;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xcb
-****************************************************************************/
-void x86emuOp_ret_far(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("RETF\n");
- RETURN_TRACE("RETF",M.x86.saved_cs,M.x86.saved_ip);
- TRACE_AND_STEP();
- M.x86.R_IP = pop_word();
- M.x86.R_CS = pop_word();
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xcc
-****************************************************************************/
-void x86emuOp_int3(u8 X86EMU_UNUSED(op1))
-{
- u16 tmp;
-
- START_OF_INSTR();
- DECODE_PRINTF("INT 3\n");
- tmp = (u16) mem_access_word(3 * 4 + 2);
- /* access the segment register */
- TRACE_AND_STEP();
- if (_X86EMU_intrTab[3]) {
- (*_X86EMU_intrTab[3])(3);
- } else {
- push_word((u16)M.x86.R_FLG);
- CLEAR_FLAG(F_IF);
- CLEAR_FLAG(F_TF);
- push_word(M.x86.R_CS);
- M.x86.R_CS = mem_access_word(3 * 4 + 2);
- push_word(M.x86.R_IP);
- M.x86.R_IP = mem_access_word(3 * 4);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xcd
-****************************************************************************/
-void x86emuOp_int_IMM(u8 X86EMU_UNUSED(op1))
-{
- u16 tmp;
- u8 intnum;
-
- START_OF_INSTR();
- DECODE_PRINTF("INT\t");
- intnum = fetch_byte_imm();
- DECODE_PRINTF2("%x\n", intnum);
- tmp = mem_access_word(intnum * 4 + 2);
- TRACE_AND_STEP();
- if (_X86EMU_intrTab[intnum]) {
- (*_X86EMU_intrTab[intnum])(intnum);
- } else {
- push_word((u16)M.x86.R_FLG);
- CLEAR_FLAG(F_IF);
- CLEAR_FLAG(F_TF);
- push_word(M.x86.R_CS);
- M.x86.R_CS = mem_access_word(intnum * 4 + 2);
- push_word(M.x86.R_IP);
- M.x86.R_IP = mem_access_word(intnum * 4);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xce
-****************************************************************************/
-void x86emuOp_into(u8 X86EMU_UNUSED(op1))
-{
- u16 tmp;
-
- START_OF_INSTR();
- DECODE_PRINTF("INTO\n");
- TRACE_AND_STEP();
- if (ACCESS_FLAG(F_OF)) {
- tmp = mem_access_word(4 * 4 + 2);
- if (_X86EMU_intrTab[4]) {
- (*_X86EMU_intrTab[4])(4);
- } else {
- push_word((u16)M.x86.R_FLG);
- CLEAR_FLAG(F_IF);
- CLEAR_FLAG(F_TF);
- push_word(M.x86.R_CS);
- M.x86.R_CS = mem_access_word(4 * 4 + 2);
- push_word(M.x86.R_IP);
- M.x86.R_IP = mem_access_word(4 * 4);
- }
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xcf
-****************************************************************************/
-void x86emuOp_iret(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("IRET\n");
-
- TRACE_AND_STEP();
-
- M.x86.R_IP = pop_word();
- M.x86.R_CS = pop_word();
- M.x86.R_FLG = pop_word();
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xd0
-****************************************************************************/
-void x86emuOp_opcD0_byte_RM_1(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg;
- uint destoffset;
- u8 destval;
-
- /*
- * Yet another weirdo special case instruction format. Part of
- * the opcode held below in "RH". Doubly nested case would
- * result, except that the decoded instruction
- */
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
- if (DEBUG_DECODE()) {
- /* XXX DECODE_PRINTF may be changed to something more
- general, so that it is important to leave the strings
- in the same format, even though the result is that the
- above test is done twice. */
- switch (rh) {
- case 0:
- DECODE_PRINTF("ROL\t");
- break;
- case 1:
- DECODE_PRINTF("ROR\t");
- break;
- case 2:
- DECODE_PRINTF("RCL\t");
- break;
- case 3:
- DECODE_PRINTF("RCR\t");
- break;
- case 4:
- DECODE_PRINTF("SHL\t");
- break;
- case 5:
- DECODE_PRINTF("SHR\t");
- break;
- case 6:
- DECODE_PRINTF("SAL\t");
- break;
- case 7:
- DECODE_PRINTF("SAR\t");
- break;
- }
- }
-#endif
- /* know operation, decode the mod byte to find the addressing
- mode. */
- switch (mod) {
- case 0:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",1\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD0_byte_operation[rh]) (destval, 1);
- store_data_byte(destoffset, destval);
- break;
- case 1:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",1\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD0_byte_operation[rh]) (destval, 1);
- store_data_byte(destoffset, destval);
- break;
- case 2:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",1\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD0_byte_operation[rh]) (destval, 1);
- store_data_byte(destoffset, destval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF(",1\n");
- TRACE_AND_STEP();
- destval = (*opcD0_byte_operation[rh]) (*destreg, 1);
- *destreg = destval;
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xd1
-****************************************************************************/
-void x86emuOp_opcD1_word_RM_1(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
-
- /*
- * Yet another weirdo special case instruction format. Part of
- * the opcode held below in "RH". Doubly nested case would
- * result, except that the decoded instruction
- */
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
- if (DEBUG_DECODE()) {
- /* XXX DECODE_PRINTF may be changed to something more
- general, so that it is important to leave the strings
- in the same format, even though the result is that the
- above test is done twice. */
- switch (rh) {
- case 0:
- DECODE_PRINTF("ROL\t");
- break;
- case 1:
- DECODE_PRINTF("ROR\t");
- break;
- case 2:
- DECODE_PRINTF("RCL\t");
- break;
- case 3:
- DECODE_PRINTF("RCR\t");
- break;
- case 4:
- DECODE_PRINTF("SHL\t");
- break;
- case 5:
- DECODE_PRINTF("SHR\t");
- break;
- case 6:
- DECODE_PRINTF("SAL\t");
- break;
- case 7:
- DECODE_PRINTF("SAR\t");
- break;
- }
- }
-#endif
- /* know operation, decode the mod byte to find the addressing
- mode. */
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("DWORD PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",1\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD1_long_operation[rh]) (destval, 1);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("WORD PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",1\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD1_word_operation[rh]) (destval, 1);
- store_data_word(destoffset, destval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("DWORD PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",1\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD1_long_operation[rh]) (destval, 1);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("WORD PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",1\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD1_word_operation[rh]) (destval, 1);
- store_data_word(destoffset, destval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("DWORD PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",1\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD1_long_operation[rh]) (destval, 1);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",1\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD1_word_operation[rh]) (destval, 1);
- store_data_word(destoffset, destval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *destreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",1\n");
- TRACE_AND_STEP();
- destval = (*opcD1_long_operation[rh]) (*destreg, 1);
- *destreg = destval;
- } else {
- u16 destval;
- u16 *destreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",1\n");
- TRACE_AND_STEP();
- destval = (*opcD1_word_operation[rh]) (*destreg, 1);
- *destreg = destval;
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xd2
-****************************************************************************/
-void x86emuOp_opcD2_byte_RM_CL(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg;
- uint destoffset;
- u8 destval;
- u8 amt;
-
- /*
- * Yet another weirdo special case instruction format. Part of
- * the opcode held below in "RH". Doubly nested case would
- * result, except that the decoded instruction
- */
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
- if (DEBUG_DECODE()) {
- /* XXX DECODE_PRINTF may be changed to something more
- general, so that it is important to leave the strings
- in the same format, even though the result is that the
- above test is done twice. */
- switch (rh) {
- case 0:
- DECODE_PRINTF("ROL\t");
- break;
- case 1:
- DECODE_PRINTF("ROR\t");
- break;
- case 2:
- DECODE_PRINTF("RCL\t");
- break;
- case 3:
- DECODE_PRINTF("RCR\t");
- break;
- case 4:
- DECODE_PRINTF("SHL\t");
- break;
- case 5:
- DECODE_PRINTF("SHR\t");
- break;
- case 6:
- DECODE_PRINTF("SAL\t");
- break;
- case 7:
- DECODE_PRINTF("SAR\t");
- break;
- }
- }
-#endif
- /* know operation, decode the mod byte to find the addressing
- mode. */
- amt = M.x86.R_CL;
- switch (mod) {
- case 0:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",CL\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD0_byte_operation[rh]) (destval, amt);
- store_data_byte(destoffset, destval);
- break;
- case 1:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",CL\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD0_byte_operation[rh]) (destval, amt);
- store_data_byte(destoffset, destval);
- break;
- case 2:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",CL\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD0_byte_operation[rh]) (destval, amt);
- store_data_byte(destoffset, destval);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF(",CL\n");
- TRACE_AND_STEP();
- destval = (*opcD0_byte_operation[rh]) (*destreg, amt);
- *destreg = destval;
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xd3
-****************************************************************************/
-void x86emuOp_opcD3_word_RM_CL(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
- u8 amt;
-
- /*
- * Yet another weirdo special case instruction format. Part of
- * the opcode held below in "RH". Doubly nested case would
- * result, except that the decoded instruction
- */
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
- if (DEBUG_DECODE()) {
- /* XXX DECODE_PRINTF may be changed to something more
- general, so that it is important to leave the strings
- in the same format, even though the result is that the
- above test is done twice. */
- switch (rh) {
- case 0:
- DECODE_PRINTF("ROL\t");
- break;
- case 1:
- DECODE_PRINTF("ROR\t");
- break;
- case 2:
- DECODE_PRINTF("RCL\t");
- break;
- case 3:
- DECODE_PRINTF("RCR\t");
- break;
- case 4:
- DECODE_PRINTF("SHL\t");
- break;
- case 5:
- DECODE_PRINTF("SHR\t");
- break;
- case 6:
- DECODE_PRINTF("SAL\t");
- break;
- case 7:
- DECODE_PRINTF("SAR\t");
- break;
- }
- }
-#endif
- /* know operation, decode the mod byte to find the addressing
- mode. */
- amt = M.x86.R_CL;
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("DWORD PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",CL\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD1_long_operation[rh]) (destval, amt);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("WORD PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",CL\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD1_word_operation[rh]) (destval, amt);
- store_data_word(destoffset, destval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("DWORD PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",CL\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD1_long_operation[rh]) (destval, amt);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("WORD PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",CL\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD1_word_operation[rh]) (destval, amt);
- store_data_word(destoffset, destval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("DWORD PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",CL\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD1_long_operation[rh]) (destval, amt);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("WORD PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",CL\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = (*opcD1_word_operation[rh]) (destval, amt);
- store_data_word(destoffset, destval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",CL\n");
- TRACE_AND_STEP();
- *destreg = (*opcD1_long_operation[rh]) (*destreg, amt);
- } else {
- u16 *destreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",CL\n");
- TRACE_AND_STEP();
- *destreg = (*opcD1_word_operation[rh]) (*destreg, amt);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xd4
-****************************************************************************/
-void x86emuOp_aam(u8 X86EMU_UNUSED(op1))
-{
- u8 a;
-
- START_OF_INSTR();
- DECODE_PRINTF("AAM\n");
- a = fetch_byte_imm(); /* this is a stupid encoding. */
- if (a != 10) {
- DECODE_PRINTF("ERROR DECODING AAM\n");
- TRACE_REGS();
- HALT_SYS();
- }
- TRACE_AND_STEP();
- /* note the type change here --- returning AL and AH in AX. */
- M.x86.R_AX = aam_word(M.x86.R_AL);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xd5
-****************************************************************************/
-void x86emuOp_aad(u8 X86EMU_UNUSED(op1))
-{
- u8 a;
-
- START_OF_INSTR();
- DECODE_PRINTF("AAD\n");
- a = fetch_byte_imm();
- TRACE_AND_STEP();
- M.x86.R_AX = aad_word(M.x86.R_AX);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/* opcode 0xd6 ILLEGAL OPCODE */
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xd7
-****************************************************************************/
-void x86emuOp_xlat(u8 X86EMU_UNUSED(op1))
-{
- u16 addr;
-
- START_OF_INSTR();
- DECODE_PRINTF("XLAT\n");
- TRACE_AND_STEP();
- addr = (u16)(M.x86.R_BX + (u8)M.x86.R_AL);
- M.x86.R_AL = fetch_data_byte(addr);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/* instuctions D8 .. DF are in i87_ops.c */
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xe0
-****************************************************************************/
-void x86emuOp_loopne(u8 X86EMU_UNUSED(op1))
-{
- s16 ip;
-
- START_OF_INSTR();
- DECODE_PRINTF("LOOPNE\t");
- ip = (s8) fetch_byte_imm();
- ip += (s16) M.x86.R_IP;
- DECODE_PRINTF2("%04x\n", ip);
- TRACE_AND_STEP();
- M.x86.R_CX -= 1;
- if (M.x86.R_CX != 0 && !ACCESS_FLAG(F_ZF)) /* CX != 0 and !ZF */
- M.x86.R_IP = ip;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xe1
-****************************************************************************/
-void x86emuOp_loope(u8 X86EMU_UNUSED(op1))
-{
- s16 ip;
-
- START_OF_INSTR();
- DECODE_PRINTF("LOOPE\t");
- ip = (s8) fetch_byte_imm();
- ip += (s16) M.x86.R_IP;
- DECODE_PRINTF2("%04x\n", ip);
- TRACE_AND_STEP();
- M.x86.R_CX -= 1;
- if (M.x86.R_CX != 0 && ACCESS_FLAG(F_ZF)) /* CX != 0 and ZF */
- M.x86.R_IP = ip;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xe2
-****************************************************************************/
-void x86emuOp_loop(u8 X86EMU_UNUSED(op1))
-{
- s16 ip;
-
- START_OF_INSTR();
- DECODE_PRINTF("LOOP\t");
- ip = (s8) fetch_byte_imm();
- ip += (s16) M.x86.R_IP;
- DECODE_PRINTF2("%04x\n", ip);
- TRACE_AND_STEP();
- M.x86.R_CX -= 1;
- if (M.x86.R_CX != 0)
- M.x86.R_IP = ip;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xe3
-****************************************************************************/
-void x86emuOp_jcxz(u8 X86EMU_UNUSED(op1))
-{
- u16 target;
- s8 offset;
-
- /* jump to byte offset if overflow flag is set */
- START_OF_INSTR();
- DECODE_PRINTF("JCXZ\t");
- offset = (s8)fetch_byte_imm();
- target = (u16)(M.x86.R_IP + offset);
- DECODE_PRINTF2("%x\n", target);
- TRACE_AND_STEP();
- if (M.x86.R_CX == 0)
- M.x86.R_IP = target;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xe4
-****************************************************************************/
-void x86emuOp_in_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
-{
- u8 port;
-
- START_OF_INSTR();
- DECODE_PRINTF("IN\t");
- port = (u8) fetch_byte_imm();
- DECODE_PRINTF2("%x,AL\n", port);
- TRACE_AND_STEP();
- M.x86.R_AL = (*sys_inb)(port);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xe5
-****************************************************************************/
-void x86emuOp_in_word_AX_IMM(u8 X86EMU_UNUSED(op1))
-{
- u8 port;
-
- START_OF_INSTR();
- DECODE_PRINTF("IN\t");
- port = (u8) fetch_byte_imm();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF2("EAX,%x\n", port);
- } else {
- DECODE_PRINTF2("AX,%x\n", port);
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EAX = (*sys_inl)(port);
- } else {
- M.x86.R_AX = (*sys_inw)(port);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xe6
-****************************************************************************/
-void x86emuOp_out_byte_IMM_AL(u8 X86EMU_UNUSED(op1))
-{
- u8 port;
-
- START_OF_INSTR();
- DECODE_PRINTF("OUT\t");
- port = (u8) fetch_byte_imm();
- DECODE_PRINTF2("%x,AL\n", port);
- TRACE_AND_STEP();
- (*sys_outb)(port, M.x86.R_AL);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xe7
-****************************************************************************/
-void x86emuOp_out_word_IMM_AX(u8 X86EMU_UNUSED(op1))
-{
- u8 port;
-
- START_OF_INSTR();
- DECODE_PRINTF("OUT\t");
- port = (u8) fetch_byte_imm();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF2("%x,EAX\n", port);
- } else {
- DECODE_PRINTF2("%x,AX\n", port);
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- (*sys_outl)(port, M.x86.R_EAX);
- } else {
- (*sys_outw)(port, M.x86.R_AX);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xe8
-****************************************************************************/
-void x86emuOp_call_near_IMM(u8 X86EMU_UNUSED(op1))
-{
- s16 ip;
-
- START_OF_INSTR();
- DECODE_PRINTF("CALL\t");
- ip = (s16) fetch_word_imm();
- ip += (s16) M.x86.R_IP; /* CHECK SIGN */
- DECODE_PRINTF2("%04x\n", ip);
- CALL_TRACE(M.x86.saved_cs, M.x86.saved_ip, M.x86.R_CS, ip, "");
- TRACE_AND_STEP();
- push_word(M.x86.R_IP);
- M.x86.R_IP = ip;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xe9
-****************************************************************************/
-void x86emuOp_jump_near_IMM(u8 X86EMU_UNUSED(op1))
-{
- int ip;
-
- START_OF_INSTR();
- DECODE_PRINTF("JMP\t");
- ip = (s16)fetch_word_imm();
- ip += (s16)M.x86.R_IP;
- DECODE_PRINTF2("%04x\n", ip);
- TRACE_AND_STEP();
- M.x86.R_IP = (u16)ip;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xea
-****************************************************************************/
-void x86emuOp_jump_far_IMM(u8 X86EMU_UNUSED(op1))
-{
- u16 cs, ip;
-
- START_OF_INSTR();
- DECODE_PRINTF("JMP\tFAR ");
- ip = fetch_word_imm();
- cs = fetch_word_imm();
- DECODE_PRINTF2("%04x:", cs);
- DECODE_PRINTF2("%04x\n", ip);
- TRACE_AND_STEP();
- M.x86.R_IP = ip;
- M.x86.R_CS = cs;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xeb
-****************************************************************************/
-void x86emuOp_jump_byte_IMM(u8 X86EMU_UNUSED(op1))
-{
- u16 target;
- s8 offset;
-
- START_OF_INSTR();
- DECODE_PRINTF("JMP\t");
- offset = (s8)fetch_byte_imm();
- target = (u16)(M.x86.R_IP + offset);
- DECODE_PRINTF2("%x\n", target);
- TRACE_AND_STEP();
- M.x86.R_IP = target;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xec
-****************************************************************************/
-void x86emuOp_in_byte_AL_DX(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("IN\tAL,DX\n");
- TRACE_AND_STEP();
- M.x86.R_AL = (*sys_inb)(M.x86.R_DX);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xed
-****************************************************************************/
-void x86emuOp_in_word_AX_DX(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("IN\tEAX,DX\n");
- } else {
- DECODE_PRINTF("IN\tAX,DX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_EAX = (*sys_inl)(M.x86.R_DX);
- } else {
- M.x86.R_AX = (*sys_inw)(M.x86.R_DX);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xee
-****************************************************************************/
-void x86emuOp_out_byte_DX_AL(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("OUT\tDX,AL\n");
- TRACE_AND_STEP();
- (*sys_outb)(M.x86.R_DX, M.x86.R_AL);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xef
-****************************************************************************/
-void x86emuOp_out_word_DX_AX(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("OUT\tDX,EAX\n");
- } else {
- DECODE_PRINTF("OUT\tDX,AX\n");
- }
- TRACE_AND_STEP();
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- (*sys_outl)(M.x86.R_DX, M.x86.R_EAX);
- } else {
- (*sys_outw)(M.x86.R_DX, M.x86.R_AX);
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xf0
-****************************************************************************/
-void x86emuOp_lock(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("LOCK:\n");
- TRACE_AND_STEP();
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/*opcode 0xf1 ILLEGAL OPERATION */
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xf2
-****************************************************************************/
-void x86emuOp_repne(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("REPNE\n");
- TRACE_AND_STEP();
- M.x86.mode |= SYSMODE_PREFIX_REPNE;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xf3
-****************************************************************************/
-void x86emuOp_repe(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("REPE\n");
- TRACE_AND_STEP();
- M.x86.mode |= SYSMODE_PREFIX_REPE;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xf4
-****************************************************************************/
-void x86emuOp_halt(u8 X86EMU_UNUSED(op1))
-{
- START_OF_INSTR();
- DECODE_PRINTF("HALT\n");
- TRACE_AND_STEP();
- HALT_SYS();
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xf5
-****************************************************************************/
-void x86emuOp_cmc(u8 X86EMU_UNUSED(op1))
-{
- /* complement the carry flag. */
- START_OF_INSTR();
- DECODE_PRINTF("CMC\n");
- TRACE_AND_STEP();
- TOGGLE_FLAG(F_CF);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xf6
-****************************************************************************/
-void x86emuOp_opcF6_byte_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- u8 *destreg;
- uint destoffset;
- u8 destval, srcval;
-
- /* long, drawn out code follows. Double switch for a total
- of 32 cases. */
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0: /* mod=00 */
- switch (rh) {
- case 0: /* test byte imm */
- DECODE_PRINTF("TEST\tBYTE PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- srcval = fetch_byte_imm();
- DECODE_PRINTF2("%02x\n", srcval);
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- test_byte(destval, srcval);
- break;
- case 1:
- DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n");
- HALT_SYS();
- break;
- case 2:
- DECODE_PRINTF("NOT\tBYTE PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = not_byte(destval);
- store_data_byte(destoffset, destval);
- break;
- case 3:
- DECODE_PRINTF("NEG\tBYTE PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = neg_byte(destval);
- store_data_byte(destoffset, destval);
- break;
- case 4:
- DECODE_PRINTF("MUL\tBYTE PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- mul_byte(destval);
- break;
- case 5:
- DECODE_PRINTF("IMUL\tBYTE PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- imul_byte(destval);
- break;
- case 6:
- DECODE_PRINTF("DIV\tBYTE PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- div_byte(destval);
- break;
- case 7:
- DECODE_PRINTF("IDIV\tBYTE PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- idiv_byte(destval);
- break;
- }
- break; /* end mod==00 */
- case 1: /* mod=01 */
- switch (rh) {
- case 0: /* test byte imm */
- DECODE_PRINTF("TEST\tBYTE PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- srcval = fetch_byte_imm();
- DECODE_PRINTF2("%02x\n", srcval);
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- test_byte(destval, srcval);
- break;
- case 1:
- DECODE_PRINTF("ILLEGAL OP MOD=01 RH=01 OP=F6\n");
- HALT_SYS();
- break;
- case 2:
- DECODE_PRINTF("NOT\tBYTE PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = not_byte(destval);
- store_data_byte(destoffset, destval);
- break;
- case 3:
- DECODE_PRINTF("NEG\tBYTE PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = neg_byte(destval);
- store_data_byte(destoffset, destval);
- break;
- case 4:
- DECODE_PRINTF("MUL\tBYTE PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- mul_byte(destval);
- break;
- case 5:
- DECODE_PRINTF("IMUL\tBYTE PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- imul_byte(destval);
- break;
- case 6:
- DECODE_PRINTF("DIV\tBYTE PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- div_byte(destval);
- break;
- case 7:
- DECODE_PRINTF("IDIV\tBYTE PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- idiv_byte(destval);
- break;
- }
- break; /* end mod==01 */
- case 2: /* mod=10 */
- switch (rh) {
- case 0: /* test byte imm */
- DECODE_PRINTF("TEST\tBYTE PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- srcval = fetch_byte_imm();
- DECODE_PRINTF2("%02x\n", srcval);
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- test_byte(destval, srcval);
- break;
- case 1:
- DECODE_PRINTF("ILLEGAL OP MOD=10 RH=01 OP=F6\n");
- HALT_SYS();
- break;
- case 2:
- DECODE_PRINTF("NOT\tBYTE PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = not_byte(destval);
- store_data_byte(destoffset, destval);
- break;
- case 3:
- DECODE_PRINTF("NEG\tBYTE PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = neg_byte(destval);
- store_data_byte(destoffset, destval);
- break;
- case 4:
- DECODE_PRINTF("MUL\tBYTE PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- mul_byte(destval);
- break;
- case 5:
- DECODE_PRINTF("IMUL\tBYTE PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- imul_byte(destval);
- break;
- case 6:
- DECODE_PRINTF("DIV\tBYTE PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- div_byte(destval);
- break;
- case 7:
- DECODE_PRINTF("IDIV\tBYTE PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- idiv_byte(destval);
- break;
- }
- break; /* end mod==10 */
- case 3: /* mod=11 */
- switch (rh) {
- case 0: /* test byte imm */
- DECODE_PRINTF("TEST\t");
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF(",");
- srcval = fetch_byte_imm();
- DECODE_PRINTF2("%02x\n", srcval);
- TRACE_AND_STEP();
- test_byte(*destreg, srcval);
- break;
- case 1:
- DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n");
- HALT_SYS();
- break;
- case 2:
- DECODE_PRINTF("NOT\t");
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = not_byte(*destreg);
- break;
- case 3:
- DECODE_PRINTF("NEG\t");
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = neg_byte(*destreg);
- break;
- case 4:
- DECODE_PRINTF("MUL\t");
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- mul_byte(*destreg); /*!!! */
- break;
- case 5:
- DECODE_PRINTF("IMUL\t");
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- imul_byte(*destreg);
- break;
- case 6:
- DECODE_PRINTF("DIV\t");
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- div_byte(*destreg);
- break;
- case 7:
- DECODE_PRINTF("IDIV\t");
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- idiv_byte(*destreg);
- break;
- }
- break; /* end mod==11 */
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xf7
-****************************************************************************/
-void x86emuOp_opcF7_word_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rl, rh;
- uint destoffset;
-
- /* long, drawn out code follows. Double switch for a total
- of 32 cases. */
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0: /* mod=00 */
- switch (rh) {
- case 0: /* test word imm */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval,srcval;
-
- DECODE_PRINTF("TEST\tDWORD PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- srcval = fetch_long_imm();
- DECODE_PRINTF2("%x\n", srcval);
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- test_long(destval, srcval);
- } else {
- u16 destval,srcval;
-
- DECODE_PRINTF("TEST\tWORD PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- srcval = fetch_word_imm();
- DECODE_PRINTF2("%x\n", srcval);
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- test_word(destval, srcval);
- }
- break;
- case 1:
- DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F7\n");
- HALT_SYS();
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("NOT\tDWORD PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = not_long(destval);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("NOT\tWORD PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = not_word(destval);
- store_data_word(destoffset, destval);
- }
- break;
- case 3:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("NEG\tDWORD PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = neg_long(destval);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("NEG\tWORD PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = neg_word(destval);
- store_data_word(destoffset, destval);
- }
- break;
- case 4:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("MUL\tDWORD PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- mul_long(destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("MUL\tWORD PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- mul_word(destval);
- }
- break;
- case 5:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("IMUL\tDWORD PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- imul_long(destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("IMUL\tWORD PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- imul_word(destval);
- }
- break;
- case 6:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("DIV\tDWORD PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- div_long(destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("DIV\tWORD PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- div_word(destval);
- }
- break;
- case 7:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("IDIV\tDWORD PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- idiv_long(destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("IDIV\tWORD PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- idiv_word(destval);
- }
- break;
- }
- break; /* end mod==00 */
- case 1: /* mod=01 */
- switch (rh) {
- case 0: /* test word imm */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval,srcval;
-
- DECODE_PRINTF("TEST\tDWORD PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- srcval = fetch_long_imm();
- DECODE_PRINTF2("%x\n", srcval);
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- test_long(destval, srcval);
- } else {
- u16 destval,srcval;
-
- DECODE_PRINTF("TEST\tWORD PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- srcval = fetch_word_imm();
- DECODE_PRINTF2("%x\n", srcval);
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- test_word(destval, srcval);
- }
- break;
- case 1:
- DECODE_PRINTF("ILLEGAL OP MOD=01 RH=01 OP=F6\n");
- HALT_SYS();
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("NOT\tDWORD PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = not_long(destval);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("NOT\tWORD PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = not_word(destval);
- store_data_word(destoffset, destval);
- }
- break;
- case 3:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("NEG\tDWORD PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = neg_long(destval);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("NEG\tWORD PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = neg_word(destval);
- store_data_word(destoffset, destval);
- }
- break;
- case 4:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("MUL\tDWORD PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- mul_long(destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("MUL\tWORD PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- mul_word(destval);
- }
- break;
- case 5:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("IMUL\tDWORD PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- imul_long(destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("IMUL\tWORD PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- imul_word(destval);
- }
- break;
- case 6:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("DIV\tDWORD PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- div_long(destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("DIV\tWORD PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- div_word(destval);
- }
- break;
- case 7:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("IDIV\tDWORD PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- idiv_long(destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("IDIV\tWORD PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- idiv_word(destval);
- }
- break;
- }
- break; /* end mod==01 */
- case 2: /* mod=10 */
- switch (rh) {
- case 0: /* test word imm */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval,srcval;
-
- DECODE_PRINTF("TEST\tDWORD PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- srcval = fetch_long_imm();
- DECODE_PRINTF2("%x\n", srcval);
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- test_long(destval, srcval);
- } else {
- u16 destval,srcval;
-
- DECODE_PRINTF("TEST\tWORD PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- srcval = fetch_word_imm();
- DECODE_PRINTF2("%x\n", srcval);
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- test_word(destval, srcval);
- }
- break;
- case 1:
- DECODE_PRINTF("ILLEGAL OP MOD=10 RH=01 OP=F6\n");
- HALT_SYS();
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("NOT\tDWORD PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = not_long(destval);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("NOT\tWORD PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = not_word(destval);
- store_data_word(destoffset, destval);
- }
- break;
- case 3:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("NEG\tDWORD PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = neg_long(destval);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("NEG\tWORD PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = neg_word(destval);
- store_data_word(destoffset, destval);
- }
- break;
- case 4:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("MUL\tDWORD PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- mul_long(destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("MUL\tWORD PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- mul_word(destval);
- }
- break;
- case 5:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("IMUL\tDWORD PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- imul_long(destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("IMUL\tWORD PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- imul_word(destval);
- }
- break;
- case 6:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("DIV\tDWORD PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- div_long(destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("DIV\tWORD PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- div_word(destval);
- }
- break;
- case 7:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- DECODE_PRINTF("IDIV\tDWORD PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- idiv_long(destval);
- } else {
- u16 destval;
-
- DECODE_PRINTF("IDIV\tWORD PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- idiv_word(destval);
- }
- break;
- }
- break; /* end mod==10 */
- case 3: /* mod=11 */
- switch (rh) {
- case 0: /* test word imm */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- DECODE_PRINTF("TEST\t");
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- srcval = fetch_long_imm();
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- test_long(*destreg, srcval);
- } else {
- u16 *destreg;
- u16 srcval;
-
- DECODE_PRINTF("TEST\t");
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- srcval = fetch_word_imm();
- DECODE_PRINTF2("%x\n", srcval);
- TRACE_AND_STEP();
- test_word(*destreg, srcval);
- }
- break;
- case 1:
- DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n");
- HALT_SYS();
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
-
- DECODE_PRINTF("NOT\t");
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = not_long(*destreg);
- } else {
- u16 *destreg;
-
- DECODE_PRINTF("NOT\t");
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = not_word(*destreg);
- }
- break;
- case 3:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
-
- DECODE_PRINTF("NEG\t");
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = neg_long(*destreg);
- } else {
- u16 *destreg;
-
- DECODE_PRINTF("NEG\t");
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = neg_word(*destreg);
- }
- break;
- case 4:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
-
- DECODE_PRINTF("MUL\t");
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- mul_long(*destreg); /*!!! */
- } else {
- u16 *destreg;
-
- DECODE_PRINTF("MUL\t");
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- mul_word(*destreg); /*!!! */
- }
- break;
- case 5:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
-
- DECODE_PRINTF("IMUL\t");
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- imul_long(*destreg);
- } else {
- u16 *destreg;
-
- DECODE_PRINTF("IMUL\t");
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- imul_word(*destreg);
- }
- break;
- case 6:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
-
- DECODE_PRINTF("DIV\t");
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- div_long(*destreg);
- } else {
- u16 *destreg;
-
- DECODE_PRINTF("DIV\t");
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- div_word(*destreg);
- }
- break;
- case 7:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
-
- DECODE_PRINTF("IDIV\t");
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- idiv_long(*destreg);
- } else {
- u16 *destreg;
-
- DECODE_PRINTF("IDIV\t");
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- idiv_word(*destreg);
- }
- break;
- }
- break; /* end mod==11 */
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xf8
-****************************************************************************/
-void x86emuOp_clc(u8 X86EMU_UNUSED(op1))
-{
- /* clear the carry flag. */
- START_OF_INSTR();
- DECODE_PRINTF("CLC\n");
- TRACE_AND_STEP();
- CLEAR_FLAG(F_CF);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xf9
-****************************************************************************/
-void x86emuOp_stc(u8 X86EMU_UNUSED(op1))
-{
- /* set the carry flag. */
- START_OF_INSTR();
- DECODE_PRINTF("STC\n");
- TRACE_AND_STEP();
- SET_FLAG(F_CF);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xfa
-****************************************************************************/
-void x86emuOp_cli(u8 X86EMU_UNUSED(op1))
-{
- /* clear interrupts. */
- START_OF_INSTR();
- DECODE_PRINTF("CLI\n");
- TRACE_AND_STEP();
- CLEAR_FLAG(F_IF);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xfb
-****************************************************************************/
-void x86emuOp_sti(u8 X86EMU_UNUSED(op1))
-{
- /* enable interrupts. */
- START_OF_INSTR();
- DECODE_PRINTF("STI\n");
- TRACE_AND_STEP();
- SET_FLAG(F_IF);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xfc
-****************************************************************************/
-void x86emuOp_cld(u8 X86EMU_UNUSED(op1))
-{
- /* clear interrupts. */
- START_OF_INSTR();
- DECODE_PRINTF("CLD\n");
- TRACE_AND_STEP();
- CLEAR_FLAG(F_DF);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xfd
-****************************************************************************/
-void x86emuOp_std(u8 X86EMU_UNUSED(op1))
-{
- /* clear interrupts. */
- START_OF_INSTR();
- DECODE_PRINTF("STD\n");
- TRACE_AND_STEP();
- SET_FLAG(F_DF);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xfe
-****************************************************************************/
-void x86emuOp_opcFE_byte_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rh, rl;
- u8 destval;
- uint destoffset;
- u8 *destreg;
-
- /* Yet another special case instruction. */
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
- if (DEBUG_DECODE()) {
- /* XXX DECODE_PRINTF may be changed to something more
- general, so that it is important to leave the strings
- in the same format, even though the result is that the
- above test is done twice. */
-
- switch (rh) {
- case 0:
- DECODE_PRINTF("INC\t");
- break;
- case 1:
- DECODE_PRINTF("DEC\t");
- break;
- case 2:
- case 3:
- case 4:
- case 5:
- case 6:
- case 7:
- DECODE_PRINTF2("ILLEGAL OP MAJOR OP 0xFE MINOR OP %x \n", mod);
- HALT_SYS();
- break;
- }
- }
-#endif
- switch (mod) {
- case 0:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- switch (rh) {
- case 0: /* inc word ptr ... */
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = inc_byte(destval);
- store_data_byte(destoffset, destval);
- break;
- case 1: /* dec word ptr ... */
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = dec_byte(destval);
- store_data_byte(destoffset, destval);
- break;
- }
- break;
- case 1:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- switch (rh) {
- case 0:
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = inc_byte(destval);
- store_data_byte(destoffset, destval);
- break;
- case 1:
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = dec_byte(destval);
- store_data_byte(destoffset, destval);
- break;
- }
- break;
- case 2:
- DECODE_PRINTF("BYTE PTR ");
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- switch (rh) {
- case 0:
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = inc_byte(destval);
- store_data_byte(destoffset, destval);
- break;
- case 1:
- destval = fetch_data_byte(destoffset);
- TRACE_AND_STEP();
- destval = dec_byte(destval);
- store_data_byte(destoffset, destval);
- break;
- }
- break;
- case 3:
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF("\n");
- switch (rh) {
- case 0:
- TRACE_AND_STEP();
- *destreg = inc_byte(*destreg);
- break;
- case 1:
- TRACE_AND_STEP();
- *destreg = dec_byte(*destreg);
- break;
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0xff
-****************************************************************************/
-void x86emuOp_opcFF_word_RM(u8 X86EMU_UNUSED(op1))
-{
- int mod, rh, rl;
- uint destoffset = 0;
- u16 *destreg;
- u16 destval,destval2;
-
- /* Yet another special case instruction. */
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
-#ifdef DEBUG
- if (DEBUG_DECODE()) {
- /* XXX DECODE_PRINTF may be changed to something more
- general, so that it is important to leave the strings
- in the same format, even though the result is that the
- above test is done twice. */
-
- switch (rh) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("INC\tDWORD PTR ");
- } else {
- DECODE_PRINTF("INC\tWORD PTR ");
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- DECODE_PRINTF("DEC\tDWORD PTR ");
- } else {
- DECODE_PRINTF("DEC\tWORD PTR ");
- }
- break;
- case 2:
- DECODE_PRINTF("CALL\t ");
- break;
- case 3:
- DECODE_PRINTF("CALL\tFAR ");
- break;
- case 4:
- DECODE_PRINTF("JMP\t");
- break;
- case 5:
- DECODE_PRINTF("JMP\tFAR ");
- break;
- case 6:
- DECODE_PRINTF("PUSH\t");
- break;
- case 7:
- DECODE_PRINTF("ILLEGAL DECODING OF OPCODE FF\t");
- HALT_SYS();
- break;
- }
- }
-#endif
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- switch (rh) {
- case 0: /* inc word ptr ... */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = inc_long(destval);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = inc_word(destval);
- store_data_word(destoffset, destval);
- }
- break;
- case 1: /* dec word ptr ... */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = dec_long(destval);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = dec_word(destval);
- store_data_word(destoffset, destval);
- }
- break;
- case 2: /* call word ptr ... */
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- push_word(M.x86.R_IP);
- M.x86.R_IP = destval;
- break;
- case 3: /* call far ptr ... */
- destval = fetch_data_word(destoffset);
- destval2 = fetch_data_word(destoffset + 2);
- TRACE_AND_STEP();
- push_word(M.x86.R_CS);
- M.x86.R_CS = destval2;
- push_word(M.x86.R_IP);
- M.x86.R_IP = destval;
- break;
- case 4: /* jmp word ptr ... */
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- M.x86.R_IP = destval;
- break;
- case 5: /* jmp far ptr ... */
- destval = fetch_data_word(destoffset);
- destval2 = fetch_data_word(destoffset + 2);
- TRACE_AND_STEP();
- M.x86.R_IP = destval;
- M.x86.R_CS = destval2;
- break;
- case 6: /* push word ptr ... */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- push_long(destval);
- } else {
- u16 destval;
-
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- push_word(destval);
- }
- break;
- }
- break;
- case 1:
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- switch (rh) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = inc_long(destval);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = inc_word(destval);
- store_data_word(destoffset, destval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = dec_long(destval);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = dec_word(destval);
- store_data_word(destoffset, destval);
- }
- break;
- case 2: /* call word ptr ... */
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- push_word(M.x86.R_IP);
- M.x86.R_IP = destval;
- break;
- case 3: /* call far ptr ... */
- destval = fetch_data_word(destoffset);
- destval2 = fetch_data_word(destoffset + 2);
- TRACE_AND_STEP();
- push_word(M.x86.R_CS);
- M.x86.R_CS = destval2;
- push_word(M.x86.R_IP);
- M.x86.R_IP = destval;
- break;
- case 4: /* jmp word ptr ... */
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- M.x86.R_IP = destval;
- break;
- case 5: /* jmp far ptr ... */
- destval = fetch_data_word(destoffset);
- destval2 = fetch_data_word(destoffset + 2);
- TRACE_AND_STEP();
- M.x86.R_IP = destval;
- M.x86.R_CS = destval2;
- break;
- case 6: /* push word ptr ... */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- push_long(destval);
- } else {
- u16 destval;
-
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- push_word(destval);
- }
- break;
- }
- break;
- case 2:
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- switch (rh) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = inc_long(destval);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = inc_word(destval);
- store_data_word(destoffset, destval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- destval = dec_long(destval);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
-
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- destval = dec_word(destval);
- store_data_word(destoffset, destval);
- }
- break;
- case 2: /* call word ptr ... */
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- push_word(M.x86.R_IP);
- M.x86.R_IP = destval;
- break;
- case 3: /* call far ptr ... */
- destval = fetch_data_word(destoffset);
- destval2 = fetch_data_word(destoffset + 2);
- TRACE_AND_STEP();
- push_word(M.x86.R_CS);
- M.x86.R_CS = destval2;
- push_word(M.x86.R_IP);
- M.x86.R_IP = destval;
- break;
- case 4: /* jmp word ptr ... */
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- M.x86.R_IP = destval;
- break;
- case 5: /* jmp far ptr ... */
- destval = fetch_data_word(destoffset);
- destval2 = fetch_data_word(destoffset + 2);
- TRACE_AND_STEP();
- M.x86.R_IP = destval;
- M.x86.R_CS = destval2;
- break;
- case 6: /* push word ptr ... */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
-
- destval = fetch_data_long(destoffset);
- TRACE_AND_STEP();
- push_long(destval);
- } else {
- u16 destval;
-
- destval = fetch_data_word(destoffset);
- TRACE_AND_STEP();
- push_word(destval);
- }
- break;
- }
- break;
- case 3:
- switch (rh) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = inc_long(*destreg);
- } else {
- u16 *destreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = inc_word(*destreg);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = dec_long(*destreg);
- } else {
- u16 *destreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = dec_word(*destreg);
- }
- break;
- case 2: /* call word ptr ... */
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- push_word(M.x86.R_IP);
- M.x86.R_IP = *destreg;
- break;
- case 3: /* jmp far ptr ... */
- DECODE_PRINTF("OPERATION UNDEFINED 0XFF \n");
- TRACE_AND_STEP();
- HALT_SYS();
- break;
-
- case 4: /* jmp ... */
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- M.x86.R_IP = (u16) (*destreg);
- break;
- case 5: /* jmp far ptr ... */
- DECODE_PRINTF("OPERATION UNDEFINED 0XFF \n");
- TRACE_AND_STEP();
- HALT_SYS();
- break;
- case 6:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- push_long(*destreg);
- } else {
- u16 *destreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- push_word(*destreg);
- }
- break;
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/***************************************************************************
- * Single byte operation code table:
- **************************************************************************/
-void (*x86emu_optab[256])(u8) =
-{
-/* 0x00 */ x86emuOp_add_byte_RM_R,
-/* 0x01 */ x86emuOp_add_word_RM_R,
-/* 0x02 */ x86emuOp_add_byte_R_RM,
-/* 0x03 */ x86emuOp_add_word_R_RM,
-/* 0x04 */ x86emuOp_add_byte_AL_IMM,
-/* 0x05 */ x86emuOp_add_word_AX_IMM,
-/* 0x06 */ x86emuOp_push_ES,
-/* 0x07 */ x86emuOp_pop_ES,
-
-/* 0x08 */ x86emuOp_or_byte_RM_R,
-/* 0x09 */ x86emuOp_or_word_RM_R,
-/* 0x0a */ x86emuOp_or_byte_R_RM,
-/* 0x0b */ x86emuOp_or_word_R_RM,
-/* 0x0c */ x86emuOp_or_byte_AL_IMM,
-/* 0x0d */ x86emuOp_or_word_AX_IMM,
-/* 0x0e */ x86emuOp_push_CS,
-/* 0x0f */ x86emuOp_two_byte,
-
-/* 0x10 */ x86emuOp_adc_byte_RM_R,
-/* 0x11 */ x86emuOp_adc_word_RM_R,
-/* 0x12 */ x86emuOp_adc_byte_R_RM,
-/* 0x13 */ x86emuOp_adc_word_R_RM,
-/* 0x14 */ x86emuOp_adc_byte_AL_IMM,
-/* 0x15 */ x86emuOp_adc_word_AX_IMM,
-/* 0x16 */ x86emuOp_push_SS,
-/* 0x17 */ x86emuOp_pop_SS,
-
-/* 0x18 */ x86emuOp_sbb_byte_RM_R,
-/* 0x19 */ x86emuOp_sbb_word_RM_R,
-/* 0x1a */ x86emuOp_sbb_byte_R_RM,
-/* 0x1b */ x86emuOp_sbb_word_R_RM,
-/* 0x1c */ x86emuOp_sbb_byte_AL_IMM,
-/* 0x1d */ x86emuOp_sbb_word_AX_IMM,
-/* 0x1e */ x86emuOp_push_DS,
-/* 0x1f */ x86emuOp_pop_DS,
-
-/* 0x20 */ x86emuOp_and_byte_RM_R,
-/* 0x21 */ x86emuOp_and_word_RM_R,
-/* 0x22 */ x86emuOp_and_byte_R_RM,
-/* 0x23 */ x86emuOp_and_word_R_RM,
-/* 0x24 */ x86emuOp_and_byte_AL_IMM,
-/* 0x25 */ x86emuOp_and_word_AX_IMM,
-/* 0x26 */ x86emuOp_segovr_ES,
-/* 0x27 */ x86emuOp_daa,
-
-/* 0x28 */ x86emuOp_sub_byte_RM_R,
-/* 0x29 */ x86emuOp_sub_word_RM_R,
-/* 0x2a */ x86emuOp_sub_byte_R_RM,
-/* 0x2b */ x86emuOp_sub_word_R_RM,
-/* 0x2c */ x86emuOp_sub_byte_AL_IMM,
-/* 0x2d */ x86emuOp_sub_word_AX_IMM,
-/* 0x2e */ x86emuOp_segovr_CS,
-/* 0x2f */ x86emuOp_das,
-
-/* 0x30 */ x86emuOp_xor_byte_RM_R,
-/* 0x31 */ x86emuOp_xor_word_RM_R,
-/* 0x32 */ x86emuOp_xor_byte_R_RM,
-/* 0x33 */ x86emuOp_xor_word_R_RM,
-/* 0x34 */ x86emuOp_xor_byte_AL_IMM,
-/* 0x35 */ x86emuOp_xor_word_AX_IMM,
-/* 0x36 */ x86emuOp_segovr_SS,
-/* 0x37 */ x86emuOp_aaa,
-
-/* 0x38 */ x86emuOp_cmp_byte_RM_R,
-/* 0x39 */ x86emuOp_cmp_word_RM_R,
-/* 0x3a */ x86emuOp_cmp_byte_R_RM,
-/* 0x3b */ x86emuOp_cmp_word_R_RM,
-/* 0x3c */ x86emuOp_cmp_byte_AL_IMM,
-/* 0x3d */ x86emuOp_cmp_word_AX_IMM,
-/* 0x3e */ x86emuOp_segovr_DS,
-/* 0x3f */ x86emuOp_aas,
-
-/* 0x40 */ x86emuOp_inc_AX,
-/* 0x41 */ x86emuOp_inc_CX,
-/* 0x42 */ x86emuOp_inc_DX,
-/* 0x43 */ x86emuOp_inc_BX,
-/* 0x44 */ x86emuOp_inc_SP,
-/* 0x45 */ x86emuOp_inc_BP,
-/* 0x46 */ x86emuOp_inc_SI,
-/* 0x47 */ x86emuOp_inc_DI,
-
-/* 0x48 */ x86emuOp_dec_AX,
-/* 0x49 */ x86emuOp_dec_CX,
-/* 0x4a */ x86emuOp_dec_DX,
-/* 0x4b */ x86emuOp_dec_BX,
-/* 0x4c */ x86emuOp_dec_SP,
-/* 0x4d */ x86emuOp_dec_BP,
-/* 0x4e */ x86emuOp_dec_SI,
-/* 0x4f */ x86emuOp_dec_DI,
-
-/* 0x50 */ x86emuOp_push_AX,
-/* 0x51 */ x86emuOp_push_CX,
-/* 0x52 */ x86emuOp_push_DX,
-/* 0x53 */ x86emuOp_push_BX,
-/* 0x54 */ x86emuOp_push_SP,
-/* 0x55 */ x86emuOp_push_BP,
-/* 0x56 */ x86emuOp_push_SI,
-/* 0x57 */ x86emuOp_push_DI,
-
-/* 0x58 */ x86emuOp_pop_AX,
-/* 0x59 */ x86emuOp_pop_CX,
-/* 0x5a */ x86emuOp_pop_DX,
-/* 0x5b */ x86emuOp_pop_BX,
-/* 0x5c */ x86emuOp_pop_SP,
-/* 0x5d */ x86emuOp_pop_BP,
-/* 0x5e */ x86emuOp_pop_SI,
-/* 0x5f */ x86emuOp_pop_DI,
-
-/* 0x60 */ x86emuOp_push_all,
-/* 0x61 */ x86emuOp_pop_all,
-/* 0x62 */ x86emuOp_illegal_op, /* bound */
-/* 0x63 */ x86emuOp_illegal_op, /* arpl */
-/* 0x64 */ x86emuOp_segovr_FS,
-/* 0x65 */ x86emuOp_segovr_GS,
-/* 0x66 */ x86emuOp_prefix_data,
-/* 0x67 */ x86emuOp_prefix_addr,
-
-/* 0x68 */ x86emuOp_push_word_IMM,
-/* 0x69 */ x86emuOp_imul_word_IMM,
-/* 0x6a */ x86emuOp_push_byte_IMM,
-/* 0x6b */ x86emuOp_imul_byte_IMM,
-/* 0x6c */ x86emuOp_ins_byte,
-/* 0x6d */ x86emuOp_ins_word,
-/* 0x6e */ x86emuOp_outs_byte,
-/* 0x6f */ x86emuOp_outs_word,
-
-/* 0x70 */ x86emuOp_jump_near_O,
-/* 0x71 */ x86emuOp_jump_near_NO,
-/* 0x72 */ x86emuOp_jump_near_B,
-/* 0x73 */ x86emuOp_jump_near_NB,
-/* 0x74 */ x86emuOp_jump_near_Z,
-/* 0x75 */ x86emuOp_jump_near_NZ,
-/* 0x76 */ x86emuOp_jump_near_BE,
-/* 0x77 */ x86emuOp_jump_near_NBE,
-
-/* 0x78 */ x86emuOp_jump_near_S,
-/* 0x79 */ x86emuOp_jump_near_NS,
-/* 0x7a */ x86emuOp_jump_near_P,
-/* 0x7b */ x86emuOp_jump_near_NP,
-/* 0x7c */ x86emuOp_jump_near_L,
-/* 0x7d */ x86emuOp_jump_near_NL,
-/* 0x7e */ x86emuOp_jump_near_LE,
-/* 0x7f */ x86emuOp_jump_near_NLE,
-
-/* 0x80 */ x86emuOp_opc80_byte_RM_IMM,
-/* 0x81 */ x86emuOp_opc81_word_RM_IMM,
-/* 0x82 */ x86emuOp_opc82_byte_RM_IMM,
-/* 0x83 */ x86emuOp_opc83_word_RM_IMM,
-/* 0x84 */ x86emuOp_test_byte_RM_R,
-/* 0x85 */ x86emuOp_test_word_RM_R,
-/* 0x86 */ x86emuOp_xchg_byte_RM_R,
-/* 0x87 */ x86emuOp_xchg_word_RM_R,
-
-/* 0x88 */ x86emuOp_mov_byte_RM_R,
-/* 0x89 */ x86emuOp_mov_word_RM_R,
-/* 0x8a */ x86emuOp_mov_byte_R_RM,
-/* 0x8b */ x86emuOp_mov_word_R_RM,
-/* 0x8c */ x86emuOp_mov_word_RM_SR,
-/* 0x8d */ x86emuOp_lea_word_R_M,
-/* 0x8e */ x86emuOp_mov_word_SR_RM,
-/* 0x8f */ x86emuOp_pop_RM,
-
-/* 0x90 */ x86emuOp_nop,
-/* 0x91 */ x86emuOp_xchg_word_AX_CX,
-/* 0x92 */ x86emuOp_xchg_word_AX_DX,
-/* 0x93 */ x86emuOp_xchg_word_AX_BX,
-/* 0x94 */ x86emuOp_xchg_word_AX_SP,
-/* 0x95 */ x86emuOp_xchg_word_AX_BP,
-/* 0x96 */ x86emuOp_xchg_word_AX_SI,
-/* 0x97 */ x86emuOp_xchg_word_AX_DI,
-
-/* 0x98 */ x86emuOp_cbw,
-/* 0x99 */ x86emuOp_cwd,
-/* 0x9a */ x86emuOp_call_far_IMM,
-/* 0x9b */ x86emuOp_wait,
-/* 0x9c */ x86emuOp_pushf_word,
-/* 0x9d */ x86emuOp_popf_word,
-/* 0x9e */ x86emuOp_sahf,
-/* 0x9f */ x86emuOp_lahf,
-
-/* 0xa0 */ x86emuOp_mov_AL_M_IMM,
-/* 0xa1 */ x86emuOp_mov_AX_M_IMM,
-/* 0xa2 */ x86emuOp_mov_M_AL_IMM,
-/* 0xa3 */ x86emuOp_mov_M_AX_IMM,
-/* 0xa4 */ x86emuOp_movs_byte,
-/* 0xa5 */ x86emuOp_movs_word,
-/* 0xa6 */ x86emuOp_cmps_byte,
-/* 0xa7 */ x86emuOp_cmps_word,
-/* 0xa8 */ x86emuOp_test_AL_IMM,
-/* 0xa9 */ x86emuOp_test_AX_IMM,
-/* 0xaa */ x86emuOp_stos_byte,
-/* 0xab */ x86emuOp_stos_word,
-/* 0xac */ x86emuOp_lods_byte,
-/* 0xad */ x86emuOp_lods_word,
-/* 0xac */ x86emuOp_scas_byte,
-/* 0xad */ x86emuOp_scas_word,
-
-
-/* 0xb0 */ x86emuOp_mov_byte_AL_IMM,
-/* 0xb1 */ x86emuOp_mov_byte_CL_IMM,
-/* 0xb2 */ x86emuOp_mov_byte_DL_IMM,
-/* 0xb3 */ x86emuOp_mov_byte_BL_IMM,
-/* 0xb4 */ x86emuOp_mov_byte_AH_IMM,
-/* 0xb5 */ x86emuOp_mov_byte_CH_IMM,
-/* 0xb6 */ x86emuOp_mov_byte_DH_IMM,
-/* 0xb7 */ x86emuOp_mov_byte_BH_IMM,
-
-/* 0xb8 */ x86emuOp_mov_word_AX_IMM,
-/* 0xb9 */ x86emuOp_mov_word_CX_IMM,
-/* 0xba */ x86emuOp_mov_word_DX_IMM,
-/* 0xbb */ x86emuOp_mov_word_BX_IMM,
-/* 0xbc */ x86emuOp_mov_word_SP_IMM,
-/* 0xbd */ x86emuOp_mov_word_BP_IMM,
-/* 0xbe */ x86emuOp_mov_word_SI_IMM,
-/* 0xbf */ x86emuOp_mov_word_DI_IMM,
-
-/* 0xc0 */ x86emuOp_opcC0_byte_RM_MEM,
-/* 0xc1 */ x86emuOp_opcC1_word_RM_MEM,
-/* 0xc2 */ x86emuOp_ret_near_IMM,
-/* 0xc3 */ x86emuOp_ret_near,
-/* 0xc4 */ x86emuOp_les_R_IMM,
-/* 0xc5 */ x86emuOp_lds_R_IMM,
-/* 0xc6 */ x86emuOp_mov_byte_RM_IMM,
-/* 0xc7 */ x86emuOp_mov_word_RM_IMM,
-/* 0xc8 */ x86emuOp_enter,
-/* 0xc9 */ x86emuOp_leave,
-/* 0xca */ x86emuOp_ret_far_IMM,
-/* 0xcb */ x86emuOp_ret_far,
-/* 0xcc */ x86emuOp_int3,
-/* 0xcd */ x86emuOp_int_IMM,
-/* 0xce */ x86emuOp_into,
-/* 0xcf */ x86emuOp_iret,
-
-/* 0xd0 */ x86emuOp_opcD0_byte_RM_1,
-/* 0xd1 */ x86emuOp_opcD1_word_RM_1,
-/* 0xd2 */ x86emuOp_opcD2_byte_RM_CL,
-/* 0xd3 */ x86emuOp_opcD3_word_RM_CL,
-/* 0xd4 */ x86emuOp_aam,
-/* 0xd5 */ x86emuOp_aad,
-/* 0xd6 */ x86emuOp_illegal_op, /* Undocumented SETALC instruction */
-/* 0xd7 */ x86emuOp_xlat,
-/* 0xd8 */ x86emuOp_esc_coprocess_d8,
-/* 0xd9 */ x86emuOp_esc_coprocess_d9,
-/* 0xda */ x86emuOp_esc_coprocess_da,
-/* 0xdb */ x86emuOp_esc_coprocess_db,
-/* 0xdc */ x86emuOp_esc_coprocess_dc,
-/* 0xdd */ x86emuOp_esc_coprocess_dd,
-/* 0xde */ x86emuOp_esc_coprocess_de,
-/* 0xdf */ x86emuOp_esc_coprocess_df,
-
-/* 0xe0 */ x86emuOp_loopne,
-/* 0xe1 */ x86emuOp_loope,
-/* 0xe2 */ x86emuOp_loop,
-/* 0xe3 */ x86emuOp_jcxz,
-/* 0xe4 */ x86emuOp_in_byte_AL_IMM,
-/* 0xe5 */ x86emuOp_in_word_AX_IMM,
-/* 0xe6 */ x86emuOp_out_byte_IMM_AL,
-/* 0xe7 */ x86emuOp_out_word_IMM_AX,
-
-/* 0xe8 */ x86emuOp_call_near_IMM,
-/* 0xe9 */ x86emuOp_jump_near_IMM,
-/* 0xea */ x86emuOp_jump_far_IMM,
-/* 0xeb */ x86emuOp_jump_byte_IMM,
-/* 0xec */ x86emuOp_in_byte_AL_DX,
-/* 0xed */ x86emuOp_in_word_AX_DX,
-/* 0xee */ x86emuOp_out_byte_DX_AL,
-/* 0xef */ x86emuOp_out_word_DX_AX,
-
-/* 0xf0 */ x86emuOp_lock,
-/* 0xf1 */ x86emuOp_illegal_op,
-/* 0xf2 */ x86emuOp_repne,
-/* 0xf3 */ x86emuOp_repe,
-/* 0xf4 */ x86emuOp_halt,
-/* 0xf5 */ x86emuOp_cmc,
-/* 0xf6 */ x86emuOp_opcF6_byte_RM,
-/* 0xf7 */ x86emuOp_opcF7_word_RM,
-
-/* 0xf8 */ x86emuOp_clc,
-/* 0xf9 */ x86emuOp_stc,
-/* 0xfa */ x86emuOp_cli,
-/* 0xfb */ x86emuOp_sti,
-/* 0xfc */ x86emuOp_cld,
-/* 0xfd */ x86emuOp_std,
-/* 0xfe */ x86emuOp_opcFE_byte_RM,
-/* 0xff */ x86emuOp_opcFF_word_RM,
-};
-
-void tables_relocate(unsigned int offset)
-{
- int i;
- for (i=0; i<8; i++)
- {
- opc80_byte_operation[i] -= offset;
- opc81_word_operation[i] -= offset;
- opc81_long_operation[i] -= offset;
-
- opc82_byte_operation[i] -= offset;
- opc83_word_operation[i] -= offset;
- opc83_long_operation[i] -= offset;
-
- opcD0_byte_operation[i] -= offset;
- opcD1_word_operation[i] -= offset;
- opcD1_long_operation[i] -= offset;
- }
-}
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/ops2.c b/board/MAI/bios_emulator/scitech/src/x86emu/ops2.c
deleted file mode 100644
index d381307fae..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/ops2.c
+++ /dev/null
@@ -1,2800 +0,0 @@
-/****************************************************************************
-*
-* Realmode X86 Emulator Library
-*
-* Copyright (C) 1996-1999 SciTech Software, Inc.
-* Copyright (C) David Mosberger-Tang
-* Copyright (C) 1999 Egbert Eich
-*
-* ========================================================================
-*
-* Permission to use, copy, modify, distribute, and sell this software and
-* its documentation for any purpose is hereby granted without fee,
-* provided that the above copyright notice appear in all copies and that
-* both that copyright notice and this permission notice appear in
-* supporting documentation, and that the name of the authors not be used
-* in advertising or publicity pertaining to distribution of the software
-* without specific, written prior permission. The authors makes no
-* representations about the suitability of this software for any purpose.
-* It is provided "as is" without express or implied warranty.
-*
-* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-* Developer: Kendall Bennett
-*
-* Description: This file includes subroutines to implement the decoding
-* and emulation of all the x86 extended two-byte processor
-* instructions.
-*
-****************************************************************************/
-
-#include "x86emu/x86emui.h"
-
-/*----------------------------- Implementation ----------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-op1 - Instruction op code
-
-REMARKS:
-Handles illegal opcodes.
-****************************************************************************/
-void x86emuOp2_illegal_op(
- u8 op2)
-{
- START_OF_INSTR();
- DECODE_PRINTF("ILLEGAL EXTENDED X86 OPCODE\n");
- TRACE_REGS();
- printk("%04x:%04x: %02X ILLEGAL EXTENDED X86 OPCODE!\n",
- M.x86.R_CS, M.x86.R_IP-2,op2);
- HALT_SYS();
- END_OF_INSTR();
-}
-
-#define xorl(a,b) ((a) && !(b)) || (!(a) && (b))
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0x80-0x8F
-****************************************************************************/
-void x86emuOp2_long_jump(u8 op2)
-{
- s32 target;
- char *name = 0;
- int cond = 0;
-
- /* conditional jump to word offset. */
- START_OF_INSTR();
- switch (op2) {
- case 0x80:
- name = "JO\t";
- cond = ACCESS_FLAG(F_OF);
- break;
- case 0x81:
- name = "JNO\t";
- cond = !ACCESS_FLAG(F_OF);
- break;
- case 0x82:
- name = "JB\t";
- cond = ACCESS_FLAG(F_CF);
- break;
- case 0x83:
- name = "JNB\t";
- cond = !ACCESS_FLAG(F_CF);
- break;
- case 0x84:
- name = "JZ\t";
- cond = ACCESS_FLAG(F_ZF);
- break;
- case 0x85:
- name = "JNZ\t";
- cond = !ACCESS_FLAG(F_ZF);
- break;
- case 0x86:
- name = "JBE\t";
- cond = ACCESS_FLAG(F_CF) || ACCESS_FLAG(F_ZF);
- break;
- case 0x87:
- name = "JNBE\t";
- cond = !(ACCESS_FLAG(F_CF) || ACCESS_FLAG(F_ZF));
- break;
- case 0x88:
- name = "JS\t";
- cond = ACCESS_FLAG(F_SF);
- break;
- case 0x89:
- name = "JNS\t";
- cond = !ACCESS_FLAG(F_SF);
- break;
- case 0x8a:
- name = "JP\t";
- cond = ACCESS_FLAG(F_PF);
- break;
- case 0x8b:
- name = "JNP\t";
- cond = !ACCESS_FLAG(F_PF);
- break;
- case 0x8c:
- name = "JL\t";
- cond = xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF));
- break;
- case 0x8d:
- name = "JNL\t";
- cond = xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF));
- break;
- case 0x8e:
- name = "JLE\t";
- cond = (xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF)) ||
- ACCESS_FLAG(F_ZF));
- break;
- case 0x8f:
- name = "JNLE\t";
- cond = !(xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF)) ||
- ACCESS_FLAG(F_ZF));
- break;
- }
- DECODE_PRINTF(name);
- target = (s16) fetch_word_imm();
- target += (s16) M.x86.R_IP;
- DECODE_PRINTF2("%04x\n", target);
- TRACE_AND_STEP();
- if (cond)
- M.x86.R_IP = (u16)target;
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0x90-0x9F
-****************************************************************************/
-void x86emuOp2_set_byte(u8 op2)
-{
- int mod, rl, rh;
- uint destoffset;
- u8 *destreg;
- char *name = 0;
- int cond = 0;
-
- START_OF_INSTR();
- switch (op2) {
- case 0x90:
- name = "SETO\t";
- cond = ACCESS_FLAG(F_OF);
- break;
- case 0x91:
- name = "SETNO\t";
- cond = !ACCESS_FLAG(F_OF);
- break;
- case 0x92:
- name = "SETB\t";
- cond = ACCESS_FLAG(F_CF);
- break;
- case 0x93:
- name = "SETNB\t";
- cond = !ACCESS_FLAG(F_CF);
- break;
- case 0x94:
- name = "SETZ\t";
- cond = ACCESS_FLAG(F_ZF);
- break;
- case 0x95:
- name = "SETNZ\t";
- cond = !ACCESS_FLAG(F_ZF);
- break;
- case 0x96:
- name = "SETBE\t";
- cond = ACCESS_FLAG(F_CF) || ACCESS_FLAG(F_ZF);
- break;
- case 0x97:
- name = "SETNBE\t";
- cond = !(ACCESS_FLAG(F_CF) || ACCESS_FLAG(F_ZF));
- break;
- case 0x98:
- name = "SETS\t";
- cond = ACCESS_FLAG(F_SF);
- break;
- case 0x99:
- name = "SETNS\t";
- cond = !ACCESS_FLAG(F_SF);
- break;
- case 0x9a:
- name = "SETP\t";
- cond = ACCESS_FLAG(F_PF);
- break;
- case 0x9b:
- name = "SETNP\t";
- cond = !ACCESS_FLAG(F_PF);
- break;
- case 0x9c:
- name = "SETL\t";
- cond = xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF));
- break;
- case 0x9d:
- name = "SETNL\t";
- cond = xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF));
- break;
- case 0x9e:
- name = "SETLE\t";
- cond = (xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF)) ||
- ACCESS_FLAG(F_ZF));
- break;
- case 0x9f:
- name = "SETNLE\t";
- cond = !(xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF)) ||
- ACCESS_FLAG(F_ZF));
- break;
- }
- DECODE_PRINTF(name);
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destoffset = decode_rm00_address(rl);
- TRACE_AND_STEP();
- store_data_byte(destoffset, cond ? 0x01 : 0x00);
- break;
- case 1:
- destoffset = decode_rm01_address(rl);
- TRACE_AND_STEP();
- store_data_byte(destoffset, cond ? 0x01 : 0x00);
- break;
- case 2:
- destoffset = decode_rm10_address(rl);
- TRACE_AND_STEP();
- store_data_byte(destoffset, cond ? 0x01 : 0x00);
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_BYTE_REGISTER(rl);
- TRACE_AND_STEP();
- *destreg = cond ? 0x01 : 0x00;
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xa0
-****************************************************************************/
-void x86emuOp2_push_FS(u8 X86EMU_UNUSED(op2))
-{
- START_OF_INSTR();
- DECODE_PRINTF("PUSH\tFS\n");
- TRACE_AND_STEP();
- push_word(M.x86.R_FS);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xa1
-****************************************************************************/
-void x86emuOp2_pop_FS(u8 X86EMU_UNUSED(op2))
-{
- START_OF_INSTR();
- DECODE_PRINTF("POP\tFS\n");
- TRACE_AND_STEP();
- M.x86.R_FS = pop_word();
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xa3
-****************************************************************************/
-void x86emuOp2_bt_R(u8 X86EMU_UNUSED(op2))
-{
- int mod, rl, rh;
- uint srcoffset;
- int bit,disp;
-
- START_OF_INSTR();
- DECODE_PRINTF("BT\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval;
- u32 *shiftreg;
-
- srcoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0x1F;
- disp = (s16)*shiftreg >> 5;
- srcval = fetch_data_long(srcoffset+disp);
- CONDITIONAL_SET_FLAG(srcval & (0x1 << bit),F_CF);
- } else {
- u16 srcval;
- u16 *shiftreg;
-
- srcoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0xF;
- disp = (s16)*shiftreg >> 4;
- srcval = fetch_data_word(srcoffset+disp);
- CONDITIONAL_SET_FLAG(srcval & (0x1 << bit),F_CF);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval;
- u32 *shiftreg;
-
- srcoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0x1F;
- disp = (s16)*shiftreg >> 5;
- srcval = fetch_data_long(srcoffset+disp);
- CONDITIONAL_SET_FLAG(srcval & (0x1 << bit),F_CF);
- } else {
- u16 srcval;
- u16 *shiftreg;
-
- srcoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0xF;
- disp = (s16)*shiftreg >> 4;
- srcval = fetch_data_word(srcoffset+disp);
- CONDITIONAL_SET_FLAG(srcval & (0x1 << bit),F_CF);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval;
- u32 *shiftreg;
-
- srcoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0x1F;
- disp = (s16)*shiftreg >> 5;
- srcval = fetch_data_long(srcoffset+disp);
- CONDITIONAL_SET_FLAG(srcval & (0x1 << bit),F_CF);
- } else {
- u16 srcval;
- u16 *shiftreg;
-
- srcoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0xF;
- disp = (s16)*shiftreg >> 4;
- srcval = fetch_data_word(srcoffset+disp);
- CONDITIONAL_SET_FLAG(srcval & (0x1 << bit),F_CF);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *srcreg,*shiftreg;
-
- srcreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0x1F;
- CONDITIONAL_SET_FLAG(*srcreg & (0x1 << bit),F_CF);
- } else {
- u16 *srcreg,*shiftreg;
-
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0xF;
- CONDITIONAL_SET_FLAG(*srcreg & (0x1 << bit),F_CF);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xa4
-****************************************************************************/
-void x86emuOp2_shld_IMM(u8 X86EMU_UNUSED(op2))
-{
- int mod, rl, rh;
- uint destoffset;
- u8 shift;
-
- START_OF_INSTR();
- DECODE_PRINTF("SHLD\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *shiftreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- DECODE_PRINTF2("%d\n", shift);
- TRACE_AND_STEP();
- destval = fetch_data_long(destoffset);
- destval = shld_long(destval,*shiftreg,shift);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *shiftreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- DECODE_PRINTF2("%d\n", shift);
- TRACE_AND_STEP();
- destval = fetch_data_word(destoffset);
- destval = shld_word(destval,*shiftreg,shift);
- store_data_word(destoffset, destval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *shiftreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- DECODE_PRINTF2("%d\n", shift);
- TRACE_AND_STEP();
- destval = fetch_data_long(destoffset);
- destval = shld_long(destval,*shiftreg,shift);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *shiftreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- DECODE_PRINTF2("%d\n", shift);
- TRACE_AND_STEP();
- destval = fetch_data_word(destoffset);
- destval = shld_word(destval,*shiftreg,shift);
- store_data_word(destoffset, destval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *shiftreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- DECODE_PRINTF2("%d\n", shift);
- TRACE_AND_STEP();
- destval = fetch_data_long(destoffset);
- destval = shld_long(destval,*shiftreg,shift);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *shiftreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- DECODE_PRINTF2("%d\n", shift);
- TRACE_AND_STEP();
- destval = fetch_data_word(destoffset);
- destval = shld_word(destval,*shiftreg,shift);
- store_data_word(destoffset, destval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*shiftreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- DECODE_PRINTF2("%d\n", shift);
- TRACE_AND_STEP();
- *destreg = shld_long(*destreg,*shiftreg,shift);
- } else {
- u16 *destreg,*shiftreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- DECODE_PRINTF2("%d\n", shift);
- TRACE_AND_STEP();
- *destreg = shld_word(*destreg,*shiftreg,shift);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xa5
-****************************************************************************/
-void x86emuOp2_shld_CL(u8 X86EMU_UNUSED(op2))
-{
- int mod, rl, rh;
- uint destoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("SHLD\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *shiftreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",CL\n");
- TRACE_AND_STEP();
- destval = fetch_data_long(destoffset);
- destval = shld_long(destval,*shiftreg,M.x86.R_CL);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *shiftreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",CL\n");
- TRACE_AND_STEP();
- destval = fetch_data_word(destoffset);
- destval = shld_word(destval,*shiftreg,M.x86.R_CL);
- store_data_word(destoffset, destval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *shiftreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",CL\n");
- TRACE_AND_STEP();
- destval = fetch_data_long(destoffset);
- destval = shld_long(destval,*shiftreg,M.x86.R_CL);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *shiftreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",CL\n");
- TRACE_AND_STEP();
- destval = fetch_data_word(destoffset);
- destval = shld_word(destval,*shiftreg,M.x86.R_CL);
- store_data_word(destoffset, destval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *shiftreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",CL\n");
- TRACE_AND_STEP();
- destval = fetch_data_long(destoffset);
- destval = shld_long(destval,*shiftreg,M.x86.R_CL);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *shiftreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",CL\n");
- TRACE_AND_STEP();
- destval = fetch_data_word(destoffset);
- destval = shld_word(destval,*shiftreg,M.x86.R_CL);
- store_data_word(destoffset, destval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*shiftreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",CL\n");
- TRACE_AND_STEP();
- *destreg = shld_long(*destreg,*shiftreg,M.x86.R_CL);
- } else {
- u16 *destreg,*shiftreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",CL\n");
- TRACE_AND_STEP();
- *destreg = shld_word(*destreg,*shiftreg,M.x86.R_CL);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xa8
-****************************************************************************/
-void x86emuOp2_push_GS(u8 X86EMU_UNUSED(op2))
-{
- START_OF_INSTR();
- DECODE_PRINTF("PUSH\tGS\n");
- TRACE_AND_STEP();
- push_word(M.x86.R_GS);
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xa9
-****************************************************************************/
-void x86emuOp2_pop_GS(u8 X86EMU_UNUSED(op2))
-{
- START_OF_INSTR();
- DECODE_PRINTF("POP\tGS\n");
- TRACE_AND_STEP();
- M.x86.R_GS = pop_word();
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xaa
-****************************************************************************/
-void x86emuOp2_bts_R(u8 X86EMU_UNUSED(op2))
-{
- int mod, rl, rh;
- uint srcoffset;
- int bit,disp;
-
- START_OF_INSTR();
- DECODE_PRINTF("BTS\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval,mask;
- u32 *shiftreg;
-
- srcoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0x1F;
- disp = (s16)*shiftreg >> 5;
- srcval = fetch_data_long(srcoffset+disp);
- mask = (0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- store_data_long(srcoffset+disp, srcval | mask);
- } else {
- u16 srcval,mask;
- u16 *shiftreg;
-
- srcoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0xF;
- disp = (s16)*shiftreg >> 4;
- srcval = fetch_data_word(srcoffset+disp);
- mask = (u16)(0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- store_data_word(srcoffset+disp, srcval | mask);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval,mask;
- u32 *shiftreg;
-
- srcoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0x1F;
- disp = (s16)*shiftreg >> 5;
- srcval = fetch_data_long(srcoffset+disp);
- mask = (0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- store_data_long(srcoffset+disp, srcval | mask);
- } else {
- u16 srcval,mask;
- u16 *shiftreg;
-
- srcoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0xF;
- disp = (s16)*shiftreg >> 4;
- srcval = fetch_data_word(srcoffset+disp);
- mask = (u16)(0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- store_data_word(srcoffset+disp, srcval | mask);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval,mask;
- u32 *shiftreg;
-
- srcoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0x1F;
- disp = (s16)*shiftreg >> 5;
- srcval = fetch_data_long(srcoffset+disp);
- mask = (0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- store_data_long(srcoffset+disp, srcval | mask);
- } else {
- u16 srcval,mask;
- u16 *shiftreg;
-
- srcoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0xF;
- disp = (s16)*shiftreg >> 4;
- srcval = fetch_data_word(srcoffset+disp);
- mask = (u16)(0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- store_data_word(srcoffset+disp, srcval | mask);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *srcreg,*shiftreg;
- u32 mask;
-
- srcreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0x1F;
- mask = (0x1 << bit);
- CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
- *srcreg |= mask;
- } else {
- u16 *srcreg,*shiftreg;
- u16 mask;
-
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0xF;
- mask = (u16)(0x1 << bit);
- CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
- *srcreg |= mask;
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xac
-****************************************************************************/
-void x86emuOp2_shrd_IMM(u8 X86EMU_UNUSED(op2))
-{
- int mod, rl, rh;
- uint destoffset;
- u8 shift;
-
- START_OF_INSTR();
- DECODE_PRINTF("SHLD\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *shiftreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- DECODE_PRINTF2("%d\n", shift);
- TRACE_AND_STEP();
- destval = fetch_data_long(destoffset);
- destval = shrd_long(destval,*shiftreg,shift);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *shiftreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- DECODE_PRINTF2("%d\n", shift);
- TRACE_AND_STEP();
- destval = fetch_data_word(destoffset);
- destval = shrd_word(destval,*shiftreg,shift);
- store_data_word(destoffset, destval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *shiftreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- DECODE_PRINTF2("%d\n", shift);
- TRACE_AND_STEP();
- destval = fetch_data_long(destoffset);
- destval = shrd_long(destval,*shiftreg,shift);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *shiftreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- DECODE_PRINTF2("%d\n", shift);
- TRACE_AND_STEP();
- destval = fetch_data_word(destoffset);
- destval = shrd_word(destval,*shiftreg,shift);
- store_data_word(destoffset, destval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *shiftreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- DECODE_PRINTF2("%d\n", shift);
- TRACE_AND_STEP();
- destval = fetch_data_long(destoffset);
- destval = shrd_long(destval,*shiftreg,shift);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *shiftreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- DECODE_PRINTF2("%d\n", shift);
- TRACE_AND_STEP();
- destval = fetch_data_word(destoffset);
- destval = shrd_word(destval,*shiftreg,shift);
- store_data_word(destoffset, destval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*shiftreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- DECODE_PRINTF2("%d\n", shift);
- TRACE_AND_STEP();
- *destreg = shrd_long(*destreg,*shiftreg,shift);
- } else {
- u16 *destreg,*shiftreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- DECODE_PRINTF2("%d\n", shift);
- TRACE_AND_STEP();
- *destreg = shrd_word(*destreg,*shiftreg,shift);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xad
-****************************************************************************/
-void x86emuOp2_shrd_CL(u8 X86EMU_UNUSED(op2))
-{
- int mod, rl, rh;
- uint destoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("SHLD\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *shiftreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",CL\n");
- TRACE_AND_STEP();
- destval = fetch_data_long(destoffset);
- destval = shrd_long(destval,*shiftreg,M.x86.R_CL);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *shiftreg;
-
- destoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",CL\n");
- TRACE_AND_STEP();
- destval = fetch_data_word(destoffset);
- destval = shrd_word(destval,*shiftreg,M.x86.R_CL);
- store_data_word(destoffset, destval);
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *shiftreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",CL\n");
- TRACE_AND_STEP();
- destval = fetch_data_long(destoffset);
- destval = shrd_long(destval,*shiftreg,M.x86.R_CL);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *shiftreg;
-
- destoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",CL\n");
- TRACE_AND_STEP();
- destval = fetch_data_word(destoffset);
- destval = shrd_word(destval,*shiftreg,M.x86.R_CL);
- store_data_word(destoffset, destval);
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 destval;
- u32 *shiftreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",CL\n");
- TRACE_AND_STEP();
- destval = fetch_data_long(destoffset);
- destval = shrd_long(destval,*shiftreg,M.x86.R_CL);
- store_data_long(destoffset, destval);
- } else {
- u16 destval;
- u16 *shiftreg;
-
- destoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",CL\n");
- TRACE_AND_STEP();
- destval = fetch_data_word(destoffset);
- destval = shrd_word(destval,*shiftreg,M.x86.R_CL);
- store_data_word(destoffset, destval);
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*shiftreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",CL\n");
- TRACE_AND_STEP();
- *destreg = shrd_long(*destreg,*shiftreg,M.x86.R_CL);
- } else {
- u16 *destreg,*shiftreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",CL\n");
- TRACE_AND_STEP();
- *destreg = shrd_word(*destreg,*shiftreg,M.x86.R_CL);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xaf
-****************************************************************************/
-void x86emuOp2_imul_R_RM(u8 X86EMU_UNUSED(op2))
-{
- int mod, rl, rh;
- uint srcoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("IMUL\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
- u32 res_lo,res_hi;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_long(srcoffset);
- TRACE_AND_STEP();
- imul_long_direct(&res_lo,&res_hi,(s32)*destreg,(s32)srcval);
- if (res_hi != 0) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u32)res_lo;
- } else {
- u16 *destreg;
- u16 srcval;
- u32 res;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_word(srcoffset);
- TRACE_AND_STEP();
- res = (s16)*destreg * (s16)srcval;
- if (res > 0xFFFF) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u16)res;
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
- u32 res_lo,res_hi;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_long(srcoffset);
- TRACE_AND_STEP();
- imul_long_direct(&res_lo,&res_hi,(s32)*destreg,(s32)srcval);
- if (res_hi != 0) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u32)res_lo;
- } else {
- u16 *destreg;
- u16 srcval;
- u32 res;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_word(srcoffset);
- TRACE_AND_STEP();
- res = (s16)*destreg * (s16)srcval;
- if (res > 0xFFFF) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u16)res;
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
- u32 res_lo,res_hi;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_long(srcoffset);
- TRACE_AND_STEP();
- imul_long_direct(&res_lo,&res_hi,(s32)*destreg,(s32)srcval);
- if (res_hi != 0) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u32)res_lo;
- } else {
- u16 *destreg;
- u16 srcval;
- u32 res;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_word(srcoffset);
- TRACE_AND_STEP();
- res = (s16)*destreg * (s16)srcval;
- if (res > 0xFFFF) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u16)res;
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg,*srcreg;
- u32 res_lo,res_hi;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_LONG_REGISTER(rl);
- TRACE_AND_STEP();
- imul_long_direct(&res_lo,&res_hi,(s32)*destreg,(s32)*srcreg);
- if (res_hi != 0) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u32)res_lo;
- } else {
- u16 *destreg,*srcreg;
- u32 res;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- res = (s16)*destreg * (s16)*srcreg;
- if (res > 0xFFFF) {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- }
- *destreg = (u16)res;
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xb2
-****************************************************************************/
-void x86emuOp2_lss_R_IMM(u8 X86EMU_UNUSED(op2))
-{
- int mod, rh, rl;
- u16 *dstreg;
- uint srcoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("LSS\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *dstreg = fetch_data_word(srcoffset);
- M.x86.R_SS = fetch_data_word(srcoffset + 2);
- break;
- case 1:
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *dstreg = fetch_data_word(srcoffset);
- M.x86.R_SS = fetch_data_word(srcoffset + 2);
- break;
- case 2:
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *dstreg = fetch_data_word(srcoffset);
- M.x86.R_SS = fetch_data_word(srcoffset + 2);
- break;
- case 3: /* register to register */
- /* UNDEFINED! */
- TRACE_AND_STEP();
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xb3
-****************************************************************************/
-void x86emuOp2_btr_R(u8 X86EMU_UNUSED(op2))
-{
- int mod, rl, rh;
- uint srcoffset;
- int bit,disp;
-
- START_OF_INSTR();
- DECODE_PRINTF("BTR\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval,mask;
- u32 *shiftreg;
-
- srcoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0x1F;
- disp = (s16)*shiftreg >> 5;
- srcval = fetch_data_long(srcoffset+disp);
- mask = (0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- store_data_long(srcoffset+disp, srcval & ~mask);
- } else {
- u16 srcval,mask;
- u16 *shiftreg;
-
- srcoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0xF;
- disp = (s16)*shiftreg >> 4;
- srcval = fetch_data_word(srcoffset+disp);
- mask = (u16)(0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- store_data_word(srcoffset+disp, (u16)(srcval & ~mask));
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval,mask;
- u32 *shiftreg;
-
- srcoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0x1F;
- disp = (s16)*shiftreg >> 5;
- srcval = fetch_data_long(srcoffset+disp);
- mask = (0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- store_data_long(srcoffset+disp, srcval & ~mask);
- } else {
- u16 srcval,mask;
- u16 *shiftreg;
-
- srcoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0xF;
- disp = (s16)*shiftreg >> 4;
- srcval = fetch_data_word(srcoffset+disp);
- mask = (u16)(0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- store_data_word(srcoffset+disp, (u16)(srcval & ~mask));
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval,mask;
- u32 *shiftreg;
-
- srcoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0x1F;
- disp = (s16)*shiftreg >> 5;
- srcval = fetch_data_long(srcoffset+disp);
- mask = (0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- store_data_long(srcoffset+disp, srcval & ~mask);
- } else {
- u16 srcval,mask;
- u16 *shiftreg;
-
- srcoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0xF;
- disp = (s16)*shiftreg >> 4;
- srcval = fetch_data_word(srcoffset+disp);
- mask = (u16)(0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- store_data_word(srcoffset+disp, (u16)(srcval & ~mask));
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *srcreg,*shiftreg;
- u32 mask;
-
- srcreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0x1F;
- mask = (0x1 << bit);
- CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
- *srcreg &= ~mask;
- } else {
- u16 *srcreg,*shiftreg;
- u16 mask;
-
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0xF;
- mask = (u16)(0x1 << bit);
- CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
- *srcreg &= ~mask;
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xb4
-****************************************************************************/
-void x86emuOp2_lfs_R_IMM(u8 X86EMU_UNUSED(op2))
-{
- int mod, rh, rl;
- u16 *dstreg;
- uint srcoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("LFS\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *dstreg = fetch_data_word(srcoffset);
- M.x86.R_FS = fetch_data_word(srcoffset + 2);
- break;
- case 1:
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *dstreg = fetch_data_word(srcoffset);
- M.x86.R_FS = fetch_data_word(srcoffset + 2);
- break;
- case 2:
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *dstreg = fetch_data_word(srcoffset);
- M.x86.R_FS = fetch_data_word(srcoffset + 2);
- break;
- case 3: /* register to register */
- /* UNDEFINED! */
- TRACE_AND_STEP();
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xb5
-****************************************************************************/
-void x86emuOp2_lgs_R_IMM(u8 X86EMU_UNUSED(op2))
-{
- int mod, rh, rl;
- u16 *dstreg;
- uint srcoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("LGS\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *dstreg = fetch_data_word(srcoffset);
- M.x86.R_GS = fetch_data_word(srcoffset + 2);
- break;
- case 1:
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *dstreg = fetch_data_word(srcoffset);
- M.x86.R_GS = fetch_data_word(srcoffset + 2);
- break;
- case 2:
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *dstreg = fetch_data_word(srcoffset);
- M.x86.R_GS = fetch_data_word(srcoffset + 2);
- break;
- case 3: /* register to register */
- /* UNDEFINED! */
- TRACE_AND_STEP();
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xb6
-****************************************************************************/
-void x86emuOp2_movzx_byte_R_RM(u8 X86EMU_UNUSED(op2))
-{
- int mod, rl, rh;
- uint srcoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOVZX\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_byte(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u8 *srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = *srcreg;
- } else {
- u16 *destreg;
- u8 *srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = *srcreg;
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xb7
-****************************************************************************/
-void x86emuOp2_movzx_word_R_RM(u8 X86EMU_UNUSED(op2))
-{
- int mod, rl, rh;
- uint srcoffset;
- u32 *destreg;
- u32 srcval;
- u16 *srcreg;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOVZX\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- break;
- case 1:
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- break;
- case 2:
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = fetch_data_word(srcoffset);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = *srcreg;
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xba
-****************************************************************************/
-void x86emuOp2_btX_I(u8 X86EMU_UNUSED(op2))
-{
- int mod, rl, rh;
- uint srcoffset;
- int bit;
-
- START_OF_INSTR();
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (rh) {
- case 3:
- DECODE_PRINTF("BT\t");
- break;
- case 4:
- DECODE_PRINTF("BTS\t");
- break;
- case 5:
- DECODE_PRINTF("BTR\t");
- break;
- case 6:
- DECODE_PRINTF("BTC\t");
- break;
- default:
- DECODE_PRINTF("ILLEGAL EXTENDED X86 OPCODE\n");
- TRACE_REGS();
- printk("%04x:%04x: %02X%02X ILLEGAL EXTENDED X86 OPCODE EXTENSION!\n",
- M.x86.R_CS, M.x86.R_IP-3,op2, (mod<<6)|(rh<<3)|rl);
- HALT_SYS();
- }
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval, mask;
- u8 shift;
-
- srcoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- TRACE_AND_STEP();
- bit = shift & 0x1F;
- srcval = fetch_data_long(srcoffset);
- mask = (0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- switch (rh) {
- case 4:
- store_data_long(srcoffset, srcval | mask);
- break;
- case 5:
- store_data_long(srcoffset, srcval & ~mask);
- break;
- case 6:
- store_data_long(srcoffset, srcval ^ mask);
- break;
- default:
- break;
- }
- } else {
- u16 srcval, mask;
- u8 shift;
-
- srcoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- TRACE_AND_STEP();
- bit = shift & 0xF;
- srcval = fetch_data_word(srcoffset);
- mask = (0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- switch (rh) {
- case 4:
- store_data_word(srcoffset, srcval | mask);
- break;
- case 5:
- store_data_word(srcoffset, srcval & ~mask);
- break;
- case 6:
- store_data_word(srcoffset, srcval ^ mask);
- break;
- default:
- break;
- }
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval, mask;
- u8 shift;
-
- srcoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- TRACE_AND_STEP();
- bit = shift & 0x1F;
- srcval = fetch_data_long(srcoffset);
- mask = (0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- switch (rh) {
- case 4:
- store_data_long(srcoffset, srcval | mask);
- break;
- case 5:
- store_data_long(srcoffset, srcval & ~mask);
- break;
- case 6:
- store_data_long(srcoffset, srcval ^ mask);
- break;
- default:
- break;
- }
- } else {
- u16 srcval, mask;
- u8 shift;
-
- srcoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- TRACE_AND_STEP();
- bit = shift & 0xF;
- srcval = fetch_data_word(srcoffset);
- mask = (0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- switch (rh) {
- case 4:
- store_data_word(srcoffset, srcval | mask);
- break;
- case 5:
- store_data_word(srcoffset, srcval & ~mask);
- break;
- case 6:
- store_data_word(srcoffset, srcval ^ mask);
- break;
- default:
- break;
- }
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval, mask;
- u8 shift;
-
- srcoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- TRACE_AND_STEP();
- bit = shift & 0x1F;
- srcval = fetch_data_long(srcoffset);
- mask = (0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- switch (rh) {
- case 4:
- store_data_long(srcoffset, srcval | mask);
- break;
- case 5:
- store_data_long(srcoffset, srcval & ~mask);
- break;
- case 6:
- store_data_long(srcoffset, srcval ^ mask);
- break;
- default:
- break;
- }
- } else {
- u16 srcval, mask;
- u8 shift;
-
- srcoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- TRACE_AND_STEP();
- bit = shift & 0xF;
- srcval = fetch_data_word(srcoffset);
- mask = (0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- switch (rh) {
- case 4:
- store_data_word(srcoffset, srcval | mask);
- break;
- case 5:
- store_data_word(srcoffset, srcval & ~mask);
- break;
- case 6:
- store_data_word(srcoffset, srcval ^ mask);
- break;
- default:
- break;
- }
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *srcreg;
- u32 mask;
- u8 shift;
-
- srcreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- TRACE_AND_STEP();
- bit = shift & 0x1F;
- mask = (0x1 << bit);
- CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
- switch (rh) {
- case 4:
- *srcreg |= mask;
- break;
- case 5:
- *srcreg &= ~mask;
- break;
- case 6:
- *srcreg ^= mask;
- break;
- default:
- break;
- }
- } else {
- u16 *srcreg;
- u16 mask;
- u8 shift;
-
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- shift = fetch_byte_imm();
- TRACE_AND_STEP();
- bit = shift & 0xF;
- mask = (0x1 << bit);
- CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
- switch (rh) {
- case 4:
- *srcreg |= mask;
- break;
- case 5:
- *srcreg &= ~mask;
- break;
- case 6:
- *srcreg ^= mask;
- break;
- default:
- break;
- }
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xbb
-****************************************************************************/
-void x86emuOp2_btc_R(u8 X86EMU_UNUSED(op2))
-{
- int mod, rl, rh;
- uint srcoffset;
- int bit,disp;
-
- START_OF_INSTR();
- DECODE_PRINTF("BTC\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval,mask;
- u32 *shiftreg;
-
- srcoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0x1F;
- disp = (s16)*shiftreg >> 5;
- srcval = fetch_data_long(srcoffset+disp);
- mask = (0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- store_data_long(srcoffset+disp, srcval ^ mask);
- } else {
- u16 srcval,mask;
- u16 *shiftreg;
-
- srcoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0xF;
- disp = (s16)*shiftreg >> 4;
- srcval = fetch_data_word(srcoffset+disp);
- mask = (u16)(0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- store_data_word(srcoffset+disp, (u16)(srcval ^ mask));
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval,mask;
- u32 *shiftreg;
-
- srcoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0x1F;
- disp = (s16)*shiftreg >> 5;
- srcval = fetch_data_long(srcoffset+disp);
- mask = (0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- store_data_long(srcoffset+disp, srcval ^ mask);
- } else {
- u16 srcval,mask;
- u16 *shiftreg;
-
- srcoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0xF;
- disp = (s16)*shiftreg >> 4;
- srcval = fetch_data_word(srcoffset+disp);
- mask = (u16)(0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- store_data_word(srcoffset+disp, (u16)(srcval ^ mask));
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval,mask;
- u32 *shiftreg;
-
- srcoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0x1F;
- disp = (s16)*shiftreg >> 5;
- srcval = fetch_data_long(srcoffset+disp);
- mask = (0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- store_data_long(srcoffset+disp, srcval ^ mask);
- } else {
- u16 srcval,mask;
- u16 *shiftreg;
-
- srcoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0xF;
- disp = (s16)*shiftreg >> 4;
- srcval = fetch_data_word(srcoffset+disp);
- mask = (u16)(0x1 << bit);
- CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
- store_data_word(srcoffset+disp, (u16)(srcval ^ mask));
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *srcreg,*shiftreg;
- u32 mask;
-
- srcreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0x1F;
- mask = (0x1 << bit);
- CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
- *srcreg ^= mask;
- } else {
- u16 *srcreg,*shiftreg;
- u16 mask;
-
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- shiftreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- bit = *shiftreg & 0xF;
- mask = (u16)(0x1 << bit);
- CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
- *srcreg ^= mask;
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xbc
-****************************************************************************/
-void x86emuOp2_bsf(u8 X86EMU_UNUSED(op2))
-{
- int mod, rl, rh;
- uint srcoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("BSF\n");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch(mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval, *dstreg;
-
- srcoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- dstreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- srcval = fetch_data_long(srcoffset);
- CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
- for(*dstreg = 0; *dstreg < 32; (*dstreg)++)
- if ((srcval >> *dstreg) & 1) break;
- } else {
- u16 srcval, *dstreg;
-
- srcoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- srcval = fetch_data_word(srcoffset);
- CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
- for(*dstreg = 0; *dstreg < 16; (*dstreg)++)
- if ((srcval >> *dstreg) & 1) break;
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval, *dstreg;
-
- srcoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- dstreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- srcval = fetch_data_long(srcoffset);
- CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
- for(*dstreg = 0; *dstreg < 32; (*dstreg)++)
- if ((srcval >> *dstreg) & 1) break;
- } else {
- u16 srcval, *dstreg;
-
- srcoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- srcval = fetch_data_word(srcoffset);
- CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
- for(*dstreg = 0; *dstreg < 16; (*dstreg)++)
- if ((srcval >> *dstreg) & 1) break;
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval, *dstreg;
-
- srcoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- dstreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- srcval = fetch_data_long(srcoffset);
- CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
- for(*dstreg = 0; *dstreg < 32; (*dstreg)++)
- if ((srcval >> *dstreg) & 1) break;
- } else {
- u16 srcval, *dstreg;
-
- srcoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- srcval = fetch_data_word(srcoffset);
- CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
- for(*dstreg = 0; *dstreg < 16; (*dstreg)++)
- if ((srcval >> *dstreg) & 1) break;
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *srcreg, *dstreg;
-
- srcreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- dstreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- CONDITIONAL_SET_FLAG(*srcreg == 0, F_ZF);
- for(*dstreg = 0; *dstreg < 32; (*dstreg)++)
- if ((*srcreg >> *dstreg) & 1) break;
- } else {
- u16 *srcreg, *dstreg;
-
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- CONDITIONAL_SET_FLAG(*srcreg == 0, F_ZF);
- for(*dstreg = 0; *dstreg < 16; (*dstreg)++)
- if ((*srcreg >> *dstreg) & 1) break;
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xbd
-****************************************************************************/
-void x86emuOp2_bsr(u8 X86EMU_UNUSED(op2))
-{
- int mod, rl, rh;
- uint srcoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("BSF\n");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch(mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval, *dstreg;
-
- srcoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- dstreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- srcval = fetch_data_long(srcoffset);
- CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
- for(*dstreg = 31; *dstreg > 0; (*dstreg)--)
- if ((srcval >> *dstreg) & 1) break;
- } else {
- u16 srcval, *dstreg;
-
- srcoffset = decode_rm00_address(rl);
- DECODE_PRINTF(",");
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- srcval = fetch_data_word(srcoffset);
- CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
- for(*dstreg = 15; *dstreg > 0; (*dstreg)--)
- if ((srcval >> *dstreg) & 1) break;
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval, *dstreg;
-
- srcoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- dstreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- srcval = fetch_data_long(srcoffset);
- CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
- for(*dstreg = 31; *dstreg > 0; (*dstreg)--)
- if ((srcval >> *dstreg) & 1) break;
- } else {
- u16 srcval, *dstreg;
-
- srcoffset = decode_rm01_address(rl);
- DECODE_PRINTF(",");
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- srcval = fetch_data_word(srcoffset);
- CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
- for(*dstreg = 15; *dstreg > 0; (*dstreg)--)
- if ((srcval >> *dstreg) & 1) break;
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 srcval, *dstreg;
-
- srcoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- dstreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- srcval = fetch_data_long(srcoffset);
- CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
- for(*dstreg = 31; *dstreg > 0; (*dstreg)--)
- if ((srcval >> *dstreg) & 1) break;
- } else {
- u16 srcval, *dstreg;
-
- srcoffset = decode_rm10_address(rl);
- DECODE_PRINTF(",");
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- srcval = fetch_data_word(srcoffset);
- CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
- for(*dstreg = 15; *dstreg > 0; (*dstreg)--)
- if ((srcval >> *dstreg) & 1) break;
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *srcreg, *dstreg;
-
- srcreg = DECODE_RM_LONG_REGISTER(rl);
- DECODE_PRINTF(",");
- dstreg = DECODE_RM_LONG_REGISTER(rh);
- TRACE_AND_STEP();
- CONDITIONAL_SET_FLAG(*srcreg == 0, F_ZF);
- for(*dstreg = 31; *dstreg > 0; (*dstreg)--)
- if ((*srcreg >> *dstreg) & 1) break;
- } else {
- u16 *srcreg, *dstreg;
-
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF(",");
- dstreg = DECODE_RM_WORD_REGISTER(rh);
- TRACE_AND_STEP();
- CONDITIONAL_SET_FLAG(*srcreg == 0, F_ZF);
- for(*dstreg = 15; *dstreg > 0; (*dstreg)--)
- if ((*srcreg >> *dstreg) & 1) break;
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xbe
-****************************************************************************/
-void x86emuOp2_movsx_byte_R_RM(u8 X86EMU_UNUSED(op2))
-{
- int mod, rl, rh;
- uint srcoffset;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOVSX\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = (s32)((s8)fetch_data_byte(srcoffset));
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = (s16)((s8)fetch_data_byte(srcoffset));
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- }
- break;
- case 1:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = (s32)((s8)fetch_data_byte(srcoffset));
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = (s16)((s8)fetch_data_byte(srcoffset));
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- }
- break;
- case 2:
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u32 srcval;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = (s32)((s8)fetch_data_byte(srcoffset));
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- } else {
- u16 *destreg;
- u16 srcval;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = (s16)((s8)fetch_data_byte(srcoffset));
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- }
- break;
- case 3: /* register to register */
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- u32 *destreg;
- u8 *srcreg;
-
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = (s32)((s8)*srcreg);
- } else {
- u16 *destreg;
- u8 *srcreg;
-
- destreg = DECODE_RM_WORD_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_BYTE_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = (s16)((s8)*srcreg);
- }
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/****************************************************************************
-REMARKS:
-Handles opcode 0x0f,0xbf
-****************************************************************************/
-void x86emuOp2_movsx_word_R_RM(u8 X86EMU_UNUSED(op2))
-{
- int mod, rl, rh;
- uint srcoffset;
- u32 *destreg;
- u32 srcval;
- u16 *srcreg;
-
- START_OF_INSTR();
- DECODE_PRINTF("MOVSX\t");
- FETCH_DECODE_MODRM(mod, rh, rl);
- switch (mod) {
- case 0:
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm00_address(rl);
- srcval = (s32)((s16)fetch_data_word(srcoffset));
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- break;
- case 1:
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm01_address(rl);
- srcval = (s32)((s16)fetch_data_word(srcoffset));
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- break;
- case 2:
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcoffset = decode_rm10_address(rl);
- srcval = (s32)((s16)fetch_data_word(srcoffset));
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = srcval;
- break;
- case 3: /* register to register */
- destreg = DECODE_RM_LONG_REGISTER(rh);
- DECODE_PRINTF(",");
- srcreg = DECODE_RM_WORD_REGISTER(rl);
- DECODE_PRINTF("\n");
- TRACE_AND_STEP();
- *destreg = (s32)((s16)*srcreg);
- break;
- }
- DECODE_CLEAR_SEGOVR();
- END_OF_INSTR();
-}
-
-/***************************************************************************
- * Double byte operation code table:
- **************************************************************************/
-void (*x86emu_optab2[256])(u8) =
-{
-/* 0x00 */ x86emuOp2_illegal_op, /* Group F (ring 0 PM) */
-/* 0x01 */ x86emuOp2_illegal_op, /* Group G (ring 0 PM) */
-/* 0x02 */ x86emuOp2_illegal_op, /* lar (ring 0 PM) */
-/* 0x03 */ x86emuOp2_illegal_op, /* lsl (ring 0 PM) */
-/* 0x04 */ x86emuOp2_illegal_op,
-/* 0x05 */ x86emuOp2_illegal_op, /* loadall (undocumented) */
-/* 0x06 */ x86emuOp2_illegal_op, /* clts (ring 0 PM) */
-/* 0x07 */ x86emuOp2_illegal_op, /* loadall (undocumented) */
-/* 0x08 */ x86emuOp2_illegal_op, /* invd (ring 0 PM) */
-/* 0x09 */ x86emuOp2_illegal_op, /* wbinvd (ring 0 PM) */
-/* 0x0a */ x86emuOp2_illegal_op,
-/* 0x0b */ x86emuOp2_illegal_op,
-/* 0x0c */ x86emuOp2_illegal_op,
-/* 0x0d */ x86emuOp2_illegal_op,
-/* 0x0e */ x86emuOp2_illegal_op,
-/* 0x0f */ x86emuOp2_illegal_op,
-
-/* 0x10 */ x86emuOp2_illegal_op,
-/* 0x11 */ x86emuOp2_illegal_op,
-/* 0x12 */ x86emuOp2_illegal_op,
-/* 0x13 */ x86emuOp2_illegal_op,
-/* 0x14 */ x86emuOp2_illegal_op,
-/* 0x15 */ x86emuOp2_illegal_op,
-/* 0x16 */ x86emuOp2_illegal_op,
-/* 0x17 */ x86emuOp2_illegal_op,
-/* 0x18 */ x86emuOp2_illegal_op,
-/* 0x19 */ x86emuOp2_illegal_op,
-/* 0x1a */ x86emuOp2_illegal_op,
-/* 0x1b */ x86emuOp2_illegal_op,
-/* 0x1c */ x86emuOp2_illegal_op,
-/* 0x1d */ x86emuOp2_illegal_op,
-/* 0x1e */ x86emuOp2_illegal_op,
-/* 0x1f */ x86emuOp2_illegal_op,
-
-/* 0x20 */ x86emuOp2_illegal_op, /* mov reg32,creg (ring 0 PM) */
-/* 0x21 */ x86emuOp2_illegal_op, /* mov reg32,dreg (ring 0 PM) */
-/* 0x22 */ x86emuOp2_illegal_op, /* mov creg,reg32 (ring 0 PM) */
-/* 0x23 */ x86emuOp2_illegal_op, /* mov dreg,reg32 (ring 0 PM) */
-/* 0x24 */ x86emuOp2_illegal_op, /* mov reg32,treg (ring 0 PM) */
-/* 0x25 */ x86emuOp2_illegal_op,
-/* 0x26 */ x86emuOp2_illegal_op, /* mov treg,reg32 (ring 0 PM) */
-/* 0x27 */ x86emuOp2_illegal_op,
-/* 0x28 */ x86emuOp2_illegal_op,
-/* 0x29 */ x86emuOp2_illegal_op,
-/* 0x2a */ x86emuOp2_illegal_op,
-/* 0x2b */ x86emuOp2_illegal_op,
-/* 0x2c */ x86emuOp2_illegal_op,
-/* 0x2d */ x86emuOp2_illegal_op,
-/* 0x2e */ x86emuOp2_illegal_op,
-/* 0x2f */ x86emuOp2_illegal_op,
-
-/* 0x30 */ x86emuOp2_illegal_op,
-/* 0x31 */ x86emuOp2_illegal_op,
-/* 0x32 */ x86emuOp2_illegal_op,
-/* 0x33 */ x86emuOp2_illegal_op,
-/* 0x34 */ x86emuOp2_illegal_op,
-/* 0x35 */ x86emuOp2_illegal_op,
-/* 0x36 */ x86emuOp2_illegal_op,
-/* 0x37 */ x86emuOp2_illegal_op,
-/* 0x38 */ x86emuOp2_illegal_op,
-/* 0x39 */ x86emuOp2_illegal_op,
-/* 0x3a */ x86emuOp2_illegal_op,
-/* 0x3b */ x86emuOp2_illegal_op,
-/* 0x3c */ x86emuOp2_illegal_op,
-/* 0x3d */ x86emuOp2_illegal_op,
-/* 0x3e */ x86emuOp2_illegal_op,
-/* 0x3f */ x86emuOp2_illegal_op,
-
-/* 0x40 */ x86emuOp2_illegal_op,
-/* 0x41 */ x86emuOp2_illegal_op,
-/* 0x42 */ x86emuOp2_illegal_op,
-/* 0x43 */ x86emuOp2_illegal_op,
-/* 0x44 */ x86emuOp2_illegal_op,
-/* 0x45 */ x86emuOp2_illegal_op,
-/* 0x46 */ x86emuOp2_illegal_op,
-/* 0x47 */ x86emuOp2_illegal_op,
-/* 0x48 */ x86emuOp2_illegal_op,
-/* 0x49 */ x86emuOp2_illegal_op,
-/* 0x4a */ x86emuOp2_illegal_op,
-/* 0x4b */ x86emuOp2_illegal_op,
-/* 0x4c */ x86emuOp2_illegal_op,
-/* 0x4d */ x86emuOp2_illegal_op,
-/* 0x4e */ x86emuOp2_illegal_op,
-/* 0x4f */ x86emuOp2_illegal_op,
-
-/* 0x50 */ x86emuOp2_illegal_op,
-/* 0x51 */ x86emuOp2_illegal_op,
-/* 0x52 */ x86emuOp2_illegal_op,
-/* 0x53 */ x86emuOp2_illegal_op,
-/* 0x54 */ x86emuOp2_illegal_op,
-/* 0x55 */ x86emuOp2_illegal_op,
-/* 0x56 */ x86emuOp2_illegal_op,
-/* 0x57 */ x86emuOp2_illegal_op,
-/* 0x58 */ x86emuOp2_illegal_op,
-/* 0x59 */ x86emuOp2_illegal_op,
-/* 0x5a */ x86emuOp2_illegal_op,
-/* 0x5b */ x86emuOp2_illegal_op,
-/* 0x5c */ x86emuOp2_illegal_op,
-/* 0x5d */ x86emuOp2_illegal_op,
-/* 0x5e */ x86emuOp2_illegal_op,
-/* 0x5f */ x86emuOp2_illegal_op,
-
-/* 0x60 */ x86emuOp2_illegal_op,
-/* 0x61 */ x86emuOp2_illegal_op,
-/* 0x62 */ x86emuOp2_illegal_op,
-/* 0x63 */ x86emuOp2_illegal_op,
-/* 0x64 */ x86emuOp2_illegal_op,
-/* 0x65 */ x86emuOp2_illegal_op,
-/* 0x66 */ x86emuOp2_illegal_op,
-/* 0x67 */ x86emuOp2_illegal_op,
-/* 0x68 */ x86emuOp2_illegal_op,
-/* 0x69 */ x86emuOp2_illegal_op,
-/* 0x6a */ x86emuOp2_illegal_op,
-/* 0x6b */ x86emuOp2_illegal_op,
-/* 0x6c */ x86emuOp2_illegal_op,
-/* 0x6d */ x86emuOp2_illegal_op,
-/* 0x6e */ x86emuOp2_illegal_op,
-/* 0x6f */ x86emuOp2_illegal_op,
-
-/* 0x70 */ x86emuOp2_illegal_op,
-/* 0x71 */ x86emuOp2_illegal_op,
-/* 0x72 */ x86emuOp2_illegal_op,
-/* 0x73 */ x86emuOp2_illegal_op,
-/* 0x74 */ x86emuOp2_illegal_op,
-/* 0x75 */ x86emuOp2_illegal_op,
-/* 0x76 */ x86emuOp2_illegal_op,
-/* 0x77 */ x86emuOp2_illegal_op,
-/* 0x78 */ x86emuOp2_illegal_op,
-/* 0x79 */ x86emuOp2_illegal_op,
-/* 0x7a */ x86emuOp2_illegal_op,
-/* 0x7b */ x86emuOp2_illegal_op,
-/* 0x7c */ x86emuOp2_illegal_op,
-/* 0x7d */ x86emuOp2_illegal_op,
-/* 0x7e */ x86emuOp2_illegal_op,
-/* 0x7f */ x86emuOp2_illegal_op,
-
-/* 0x80 */ x86emuOp2_long_jump,
-/* 0x81 */ x86emuOp2_long_jump,
-/* 0x82 */ x86emuOp2_long_jump,
-/* 0x83 */ x86emuOp2_long_jump,
-/* 0x84 */ x86emuOp2_long_jump,
-/* 0x85 */ x86emuOp2_long_jump,
-/* 0x86 */ x86emuOp2_long_jump,
-/* 0x87 */ x86emuOp2_long_jump,
-/* 0x88 */ x86emuOp2_long_jump,
-/* 0x89 */ x86emuOp2_long_jump,
-/* 0x8a */ x86emuOp2_long_jump,
-/* 0x8b */ x86emuOp2_long_jump,
-/* 0x8c */ x86emuOp2_long_jump,
-/* 0x8d */ x86emuOp2_long_jump,
-/* 0x8e */ x86emuOp2_long_jump,
-/* 0x8f */ x86emuOp2_long_jump,
-
-/* 0x90 */ x86emuOp2_set_byte,
-/* 0x91 */ x86emuOp2_set_byte,
-/* 0x92 */ x86emuOp2_set_byte,
-/* 0x93 */ x86emuOp2_set_byte,
-/* 0x94 */ x86emuOp2_set_byte,
-/* 0x95 */ x86emuOp2_set_byte,
-/* 0x96 */ x86emuOp2_set_byte,
-/* 0x97 */ x86emuOp2_set_byte,
-/* 0x98 */ x86emuOp2_set_byte,
-/* 0x99 */ x86emuOp2_set_byte,
-/* 0x9a */ x86emuOp2_set_byte,
-/* 0x9b */ x86emuOp2_set_byte,
-/* 0x9c */ x86emuOp2_set_byte,
-/* 0x9d */ x86emuOp2_set_byte,
-/* 0x9e */ x86emuOp2_set_byte,
-/* 0x9f */ x86emuOp2_set_byte,
-
-/* 0xa0 */ x86emuOp2_push_FS,
-/* 0xa1 */ x86emuOp2_pop_FS,
-/* 0xa2 */ x86emuOp2_illegal_op,
-/* 0xa3 */ x86emuOp2_bt_R,
-/* 0xa4 */ x86emuOp2_shld_IMM,
-/* 0xa5 */ x86emuOp2_shld_CL,
-/* 0xa6 */ x86emuOp2_illegal_op,
-/* 0xa7 */ x86emuOp2_illegal_op,
-/* 0xa8 */ x86emuOp2_push_GS,
-/* 0xa9 */ x86emuOp2_pop_GS,
-/* 0xaa */ x86emuOp2_illegal_op,
-/* 0xab */ x86emuOp2_bt_R,
-/* 0xac */ x86emuOp2_shrd_IMM,
-/* 0xad */ x86emuOp2_shrd_CL,
-/* 0xae */ x86emuOp2_illegal_op,
-/* 0xaf */ x86emuOp2_imul_R_RM,
-
-/* 0xb0 */ x86emuOp2_illegal_op, /* TODO: cmpxchg */
-/* 0xb1 */ x86emuOp2_illegal_op, /* TODO: cmpxchg */
-/* 0xb2 */ x86emuOp2_lss_R_IMM,
-/* 0xb3 */ x86emuOp2_btr_R,
-/* 0xb4 */ x86emuOp2_lfs_R_IMM,
-/* 0xb5 */ x86emuOp2_lgs_R_IMM,
-/* 0xb6 */ x86emuOp2_movzx_byte_R_RM,
-/* 0xb7 */ x86emuOp2_movzx_word_R_RM,
-/* 0xb8 */ x86emuOp2_illegal_op,
-/* 0xb9 */ x86emuOp2_illegal_op,
-/* 0xba */ x86emuOp2_btX_I,
-/* 0xbb */ x86emuOp2_btc_R,
-/* 0xbc */ x86emuOp2_bsf,
-/* 0xbd */ x86emuOp2_bsr,
-/* 0xbe */ x86emuOp2_movsx_byte_R_RM,
-/* 0xbf */ x86emuOp2_movsx_word_R_RM,
-
-/* 0xc0 */ x86emuOp2_illegal_op, /* TODO: xadd */
-/* 0xc1 */ x86emuOp2_illegal_op, /* TODO: xadd */
-/* 0xc2 */ x86emuOp2_illegal_op,
-/* 0xc3 */ x86emuOp2_illegal_op,
-/* 0xc4 */ x86emuOp2_illegal_op,
-/* 0xc5 */ x86emuOp2_illegal_op,
-/* 0xc6 */ x86emuOp2_illegal_op,
-/* 0xc7 */ x86emuOp2_illegal_op,
-/* 0xc8 */ x86emuOp2_illegal_op, /* TODO: bswap */
-/* 0xc9 */ x86emuOp2_illegal_op, /* TODO: bswap */
-/* 0xca */ x86emuOp2_illegal_op, /* TODO: bswap */
-/* 0xcb */ x86emuOp2_illegal_op, /* TODO: bswap */
-/* 0xcc */ x86emuOp2_illegal_op, /* TODO: bswap */
-/* 0xcd */ x86emuOp2_illegal_op, /* TODO: bswap */
-/* 0xce */ x86emuOp2_illegal_op, /* TODO: bswap */
-/* 0xcf */ x86emuOp2_illegal_op, /* TODO: bswap */
-
-/* 0xd0 */ x86emuOp2_illegal_op,
-/* 0xd1 */ x86emuOp2_illegal_op,
-/* 0xd2 */ x86emuOp2_illegal_op,
-/* 0xd3 */ x86emuOp2_illegal_op,
-/* 0xd4 */ x86emuOp2_illegal_op,
-/* 0xd5 */ x86emuOp2_illegal_op,
-/* 0xd6 */ x86emuOp2_illegal_op,
-/* 0xd7 */ x86emuOp2_illegal_op,
-/* 0xd8 */ x86emuOp2_illegal_op,
-/* 0xd9 */ x86emuOp2_illegal_op,
-/* 0xda */ x86emuOp2_illegal_op,
-/* 0xdb */ x86emuOp2_illegal_op,
-/* 0xdc */ x86emuOp2_illegal_op,
-/* 0xdd */ x86emuOp2_illegal_op,
-/* 0xde */ x86emuOp2_illegal_op,
-/* 0xdf */ x86emuOp2_illegal_op,
-
-/* 0xe0 */ x86emuOp2_illegal_op,
-/* 0xe1 */ x86emuOp2_illegal_op,
-/* 0xe2 */ x86emuOp2_illegal_op,
-/* 0xe3 */ x86emuOp2_illegal_op,
-/* 0xe4 */ x86emuOp2_illegal_op,
-/* 0xe5 */ x86emuOp2_illegal_op,
-/* 0xe6 */ x86emuOp2_illegal_op,
-/* 0xe7 */ x86emuOp2_illegal_op,
-/* 0xe8 */ x86emuOp2_illegal_op,
-/* 0xe9 */ x86emuOp2_illegal_op,
-/* 0xea */ x86emuOp2_illegal_op,
-/* 0xeb */ x86emuOp2_illegal_op,
-/* 0xec */ x86emuOp2_illegal_op,
-/* 0xed */ x86emuOp2_illegal_op,
-/* 0xee */ x86emuOp2_illegal_op,
-/* 0xef */ x86emuOp2_illegal_op,
-
-/* 0xf0 */ x86emuOp2_illegal_op,
-/* 0xf1 */ x86emuOp2_illegal_op,
-/* 0xf2 */ x86emuOp2_illegal_op,
-/* 0xf3 */ x86emuOp2_illegal_op,
-/* 0xf4 */ x86emuOp2_illegal_op,
-/* 0xf5 */ x86emuOp2_illegal_op,
-/* 0xf6 */ x86emuOp2_illegal_op,
-/* 0xf7 */ x86emuOp2_illegal_op,
-/* 0xf8 */ x86emuOp2_illegal_op,
-/* 0xf9 */ x86emuOp2_illegal_op,
-/* 0xfa */ x86emuOp2_illegal_op,
-/* 0xfb */ x86emuOp2_illegal_op,
-/* 0xfc */ x86emuOp2_illegal_op,
-/* 0xfd */ x86emuOp2_illegal_op,
-/* 0xfe */ x86emuOp2_illegal_op,
-/* 0xff */ x86emuOp2_illegal_op,
-};
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/prim_ops.c b/board/MAI/bios_emulator/scitech/src/x86emu/prim_ops.c
deleted file mode 100644
index 72b1bf2879..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/prim_ops.c
+++ /dev/null
@@ -1,2914 +0,0 @@
-/****************************************************************************
-*
-* Realmode X86 Emulator Library
-*
-* Copyright (C) 1996-1999 SciTech Software, Inc.
-* Copyright (C) David Mosberger-Tang
-* Copyright (C) 1999 Egbert Eich
-*
-* ========================================================================
-*
-* Permission to use, copy, modify, distribute, and sell this software and
-* its documentation for any purpose is hereby granted without fee,
-* provided that the above copyright notice appear in all copies and that
-* both that copyright notice and this permission notice appear in
-* supporting documentation, and that the name of the authors not be used
-* in advertising or publicity pertaining to distribution of the software
-* without specific, written prior permission. The authors makes no
-* representations about the suitability of this software for any purpose.
-* It is provided "as is" without express or implied warranty.
-*
-* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-* Developer: Kendall Bennett
-*
-* Description: This file contains the code to implement the primitive
-* machine operations used by the emulation code in ops.c
-*
-* Carry Chain Calculation
-*
-* This represents a somewhat expensive calculation which is
-* apparently required to emulate the setting of the OF and AF flag.
-* The latter is not so important, but the former is. The overflow
-* flag is the XOR of the top two bits of the carry chain for an
-* addition (similar for subtraction). Since we do not want to
-* simulate the addition in a bitwise manner, we try to calculate the
-* carry chain given the two operands and the result.
-*
-* So, given the following table, which represents the addition of two
-* bits, we can derive a formula for the carry chain.
-*
-* a b cin r cout
-* 0 0 0 0 0
-* 0 0 1 1 0
-* 0 1 0 1 0
-* 0 1 1 0 1
-* 1 0 0 1 0
-* 1 0 1 0 1
-* 1 1 0 0 1
-* 1 1 1 1 1
-*
-* Construction of table for cout:
-*
-* ab
-* r \ 00 01 11 10
-* |------------------
-* 0 | 0 1 1 1
-* 1 | 0 0 1 0
-*
-* By inspection, one gets: cc = ab + r'(a + b)
-*
-* That represents alot of operations, but NO CHOICE....
-*
-* Borrow Chain Calculation.
-*
-* The following table represents the subtraction of two bits, from
-* which we can derive a formula for the borrow chain.
-*
-* a b bin r bout
-* 0 0 0 0 0
-* 0 0 1 1 1
-* 0 1 0 1 1
-* 0 1 1 0 1
-* 1 0 0 1 0
-* 1 0 1 0 0
-* 1 1 0 0 0
-* 1 1 1 1 1
-*
-* Construction of table for cout:
-*
-* ab
-* r \ 00 01 11 10
-* |------------------
-* 0 | 0 1 0 0
-* 1 | 1 1 1 0
-*
-* By inspection, one gets: bc = a'b + r(a' + b)
-*
-****************************************************************************/
-
-#define PRIM_OPS_NO_REDEFINE_ASM
-#include "x86emu/x86emui.h"
-
-/*------------------------- Global Variables ------------------------------*/
-
-#ifndef __HAVE_INLINE_ASSEMBLER__
-
-static u32 x86emu_parity_tab[8] =
-{
- 0x96696996,
- 0x69969669,
- 0x69969669,
- 0x96696996,
- 0x69969669,
- 0x96696996,
- 0x96696996,
- 0x69969669,
-};
-
-#endif
-
-#define PARITY(x) (((x86emu_parity_tab[(x) / 32] >> ((x) % 32)) & 1) == 0)
-#define XOR2(x) (((x) ^ ((x)>>1)) & 0x1)
-
-/*----------------------------- Implementation ----------------------------*/
-
-#ifndef __HAVE_INLINE_ASSEMBLER__
-
-/****************************************************************************
-REMARKS:
-Implements the AAA instruction and side effects.
-****************************************************************************/
-u16 aaa_word(u16 d)
-{
- u16 res;
- if ((d & 0xf) > 0x9 || ACCESS_FLAG(F_AF)) {
- d += 0x6;
- d += 0x100;
- SET_FLAG(F_AF);
- SET_FLAG(F_CF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_AF);
- }
- res = (u16)(d & 0xFF0F);
- CLEAR_FLAG(F_SF);
- CONDITIONAL_SET_FLAG(res == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the AAA instruction and side effects.
-****************************************************************************/
-u16 aas_word(u16 d)
-{
- u16 res;
- if ((d & 0xf) > 0x9 || ACCESS_FLAG(F_AF)) {
- d -= 0x6;
- d -= 0x100;
- SET_FLAG(F_AF);
- SET_FLAG(F_CF);
- } else {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_AF);
- }
- res = (u16)(d & 0xFF0F);
- CLEAR_FLAG(F_SF);
- CONDITIONAL_SET_FLAG(res == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the AAD instruction and side effects.
-****************************************************************************/
-u16 aad_word(u16 d)
-{
- u16 l;
- u8 hb, lb;
-
- hb = (u8)((d >> 8) & 0xff);
- lb = (u8)((d & 0xff));
- l = (u16)((lb + 10 * hb) & 0xFF);
-
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_AF);
- CLEAR_FLAG(F_OF);
- CONDITIONAL_SET_FLAG(l & 0x80, F_SF);
- CONDITIONAL_SET_FLAG(l == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(l & 0xff), F_PF);
- return l;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the AAM instruction and side effects.
-****************************************************************************/
-u16 aam_word(u8 d)
-{
- u16 h, l;
-
- h = (u16)(d / 10);
- l = (u16)(d % 10);
- l |= (u16)(h << 8);
-
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_AF);
- CLEAR_FLAG(F_OF);
- CONDITIONAL_SET_FLAG(l & 0x80, F_SF);
- CONDITIONAL_SET_FLAG(l == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(l & 0xff), F_PF);
- return l;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ADC instruction and side effects.
-****************************************************************************/
-u8 adc_byte(u8 d, u8 s)
-{
- register u32 res; /* all operands in native machine order */
- register u32 cc;
-
- if (ACCESS_FLAG(F_CF))
- res = 1 + d + s;
- else
- res = d + s;
-
- CONDITIONAL_SET_FLAG(res & 0x100, F_CF);
- CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the carry chain SEE NOTE AT TOP. */
- cc = (s & d) | ((~res) & (s | d));
- CONDITIONAL_SET_FLAG(XOR2(cc >> 6), F_OF);
- CONDITIONAL_SET_FLAG(cc & 0x8, F_AF);
- return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ADC instruction and side effects.
-****************************************************************************/
-u16 adc_word(u16 d, u16 s)
-{
- register u32 res; /* all operands in native machine order */
- register u32 cc;
-
- if (ACCESS_FLAG(F_CF))
- res = 1 + d + s;
- else
- res = d + s;
-
- CONDITIONAL_SET_FLAG(res & 0x10000, F_CF);
- CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the carry chain SEE NOTE AT TOP. */
- cc = (s & d) | ((~res) & (s | d));
- CONDITIONAL_SET_FLAG(XOR2(cc >> 14), F_OF);
- CONDITIONAL_SET_FLAG(cc & 0x8, F_AF);
- return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ADC instruction and side effects.
-****************************************************************************/
-u32 adc_long(u32 d, u32 s)
-{
- register u32 lo; /* all operands in native machine order */
- register u32 hi;
- register u32 res;
- register u32 cc;
-
- if (ACCESS_FLAG(F_CF)) {
- lo = 1 + (d & 0xFFFF) + (s & 0xFFFF);
- res = 1 + d + s;
- }
- else {
- lo = (d & 0xFFFF) + (s & 0xFFFF);
- res = d + s;
- }
- hi = (lo >> 16) + (d >> 16) + (s >> 16);
-
- CONDITIONAL_SET_FLAG(hi & 0x10000, F_CF);
- CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the carry chain SEE NOTE AT TOP. */
- cc = (s & d) | ((~res) & (s | d));
- CONDITIONAL_SET_FLAG(XOR2(cc >> 30), F_OF);
- CONDITIONAL_SET_FLAG(cc & 0x8, F_AF);
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ADD instruction and side effects.
-****************************************************************************/
-u8 add_byte(u8 d, u8 s)
-{
- register u32 res; /* all operands in native machine order */
- register u32 cc;
-
- res = d + s;
- CONDITIONAL_SET_FLAG(res & 0x100, F_CF);
- CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the carry chain SEE NOTE AT TOP. */
- cc = (s & d) | ((~res) & (s | d));
- CONDITIONAL_SET_FLAG(XOR2(cc >> 6), F_OF);
- CONDITIONAL_SET_FLAG(cc & 0x8, F_AF);
- return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ADD instruction and side effects.
-****************************************************************************/
-u16 add_word(u16 d, u16 s)
-{
- register u32 res; /* all operands in native machine order */
- register u32 cc;
-
- res = d + s;
- CONDITIONAL_SET_FLAG(res & 0x10000, F_CF);
- CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the carry chain SEE NOTE AT TOP. */
- cc = (s & d) | ((~res) & (s | d));
- CONDITIONAL_SET_FLAG(XOR2(cc >> 14), F_OF);
- CONDITIONAL_SET_FLAG(cc & 0x8, F_AF);
- return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ADD instruction and side effects.
-****************************************************************************/
-u32 add_long(u32 d, u32 s)
-{
- register u32 lo; /* all operands in native machine order */
- register u32 hi;
- register u32 res;
- register u32 cc;
-
- lo = (d & 0xFFFF) + (s & 0xFFFF);
- res = d + s;
- hi = (lo >> 16) + (d >> 16) + (s >> 16);
-
- CONDITIONAL_SET_FLAG(hi & 0x10000, F_CF);
- CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the carry chain SEE NOTE AT TOP. */
- cc = (s & d) | ((~res) & (s | d));
- CONDITIONAL_SET_FLAG(XOR2(cc >> 30), F_OF);
- CONDITIONAL_SET_FLAG(cc & 0x8, F_AF);
-
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the AND instruction and side effects.
-****************************************************************************/
-u8 and_byte(u8 d, u8 s)
-{
- register u8 res; /* all operands in native machine order */
-
- res = d & s;
-
- /* set the flags */
- CLEAR_FLAG(F_OF);
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_AF);
- CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
- CONDITIONAL_SET_FLAG(res == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res), F_PF);
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the AND instruction and side effects.
-****************************************************************************/
-u16 and_word(u16 d, u16 s)
-{
- register u16 res; /* all operands in native machine order */
-
- res = d & s;
-
- /* set the flags */
- CLEAR_FLAG(F_OF);
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_AF);
- CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
- CONDITIONAL_SET_FLAG(res == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the AND instruction and side effects.
-****************************************************************************/
-u32 and_long(u32 d, u32 s)
-{
- register u32 res; /* all operands in native machine order */
-
- res = d & s;
-
- /* set the flags */
- CLEAR_FLAG(F_OF);
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_AF);
- CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
- CONDITIONAL_SET_FLAG(res == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the CMP instruction and side effects.
-****************************************************************************/
-u8 cmp_byte(u8 d, u8 s)
-{
- register u32 res; /* all operands in native machine order */
- register u32 bc;
-
- res = d - s;
- CLEAR_FLAG(F_CF);
- CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
- CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the borrow chain. See note at top */
- bc = (res & (~d | s)) | (~d & s);
- CONDITIONAL_SET_FLAG(bc & 0x80, F_CF);
- CONDITIONAL_SET_FLAG(XOR2(bc >> 6), F_OF);
- CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
- return d;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the CMP instruction and side effects.
-****************************************************************************/
-u16 cmp_word(u16 d, u16 s)
-{
- register u32 res; /* all operands in native machine order */
- register u32 bc;
-
- res = d - s;
- CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
- CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the borrow chain. See note at top */
- bc = (res & (~d | s)) | (~d & s);
- CONDITIONAL_SET_FLAG(bc & 0x8000, F_CF);
- CONDITIONAL_SET_FLAG(XOR2(bc >> 14), F_OF);
- CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
- return d;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the CMP instruction and side effects.
-****************************************************************************/
-u32 cmp_long(u32 d, u32 s)
-{
- register u32 res; /* all operands in native machine order */
- register u32 bc;
-
- res = d - s;
- CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
- CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the borrow chain. See note at top */
- bc = (res & (~d | s)) | (~d & s);
- CONDITIONAL_SET_FLAG(bc & 0x80000000, F_CF);
- CONDITIONAL_SET_FLAG(XOR2(bc >> 30), F_OF);
- CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
- return d;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the DAA instruction and side effects.
-****************************************************************************/
-u8 daa_byte(u8 d)
-{
- u32 res = d;
- if ((d & 0xf) > 9 || ACCESS_FLAG(F_AF)) {
- res += 6;
- SET_FLAG(F_AF);
- }
- if (res > 0x9F || ACCESS_FLAG(F_CF)) {
- res += 0x60;
- SET_FLAG(F_CF);
- }
- CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
- CONDITIONAL_SET_FLAG((res & 0xFF) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the DAS instruction and side effects.
-****************************************************************************/
-u8 das_byte(u8 d)
-{
- if ((d & 0xf) > 9 || ACCESS_FLAG(F_AF)) {
- d -= 6;
- SET_FLAG(F_AF);
- }
- if (d > 0x9F || ACCESS_FLAG(F_CF)) {
- d -= 0x60;
- SET_FLAG(F_CF);
- }
- CONDITIONAL_SET_FLAG(d & 0x80, F_SF);
- CONDITIONAL_SET_FLAG(d == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(d & 0xff), F_PF);
- return d;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the DEC instruction and side effects.
-****************************************************************************/
-u8 dec_byte(u8 d)
-{
- register u32 res; /* all operands in native machine order */
- register u32 bc;
-
- res = d - 1;
- CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
- CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the borrow chain. See note at top */
- /* based on sub_byte, uses s==1. */
- bc = (res & (~d | 1)) | (~d & 1);
- /* carry flag unchanged */
- CONDITIONAL_SET_FLAG(XOR2(bc >> 6), F_OF);
- CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
- return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the DEC instruction and side effects.
-****************************************************************************/
-u16 dec_word(u16 d)
-{
- register u32 res; /* all operands in native machine order */
- register u32 bc;
-
- res = d - 1;
- CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
- CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the borrow chain. See note at top */
- /* based on the sub_byte routine, with s==1 */
- bc = (res & (~d | 1)) | (~d & 1);
- /* carry flag unchanged */
- CONDITIONAL_SET_FLAG(XOR2(bc >> 14), F_OF);
- CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
- return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the DEC instruction and side effects.
-****************************************************************************/
-u32 dec_long(u32 d)
-{
- register u32 res; /* all operands in native machine order */
- register u32 bc;
-
- res = d - 1;
-
- CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
- CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the borrow chain. See note at top */
- bc = (res & (~d | 1)) | (~d & 1);
- /* carry flag unchanged */
- CONDITIONAL_SET_FLAG(XOR2(bc >> 30), F_OF);
- CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the INC instruction and side effects.
-****************************************************************************/
-u8 inc_byte(u8 d)
-{
- register u32 res; /* all operands in native machine order */
- register u32 cc;
-
- res = d + 1;
- CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the carry chain SEE NOTE AT TOP. */
- cc = ((1 & d) | (~res)) & (1 | d);
- CONDITIONAL_SET_FLAG(XOR2(cc >> 6), F_OF);
- CONDITIONAL_SET_FLAG(cc & 0x8, F_AF);
- return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the INC instruction and side effects.
-****************************************************************************/
-u16 inc_word(u16 d)
-{
- register u32 res; /* all operands in native machine order */
- register u32 cc;
-
- res = d + 1;
- CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the carry chain SEE NOTE AT TOP. */
- cc = (1 & d) | ((~res) & (1 | d));
- CONDITIONAL_SET_FLAG(XOR2(cc >> 14), F_OF);
- CONDITIONAL_SET_FLAG(cc & 0x8, F_AF);
- return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the INC instruction and side effects.
-****************************************************************************/
-u32 inc_long(u32 d)
-{
- register u32 res; /* all operands in native machine order */
- register u32 cc;
-
- res = d + 1;
- CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the carry chain SEE NOTE AT TOP. */
- cc = (1 & d) | ((~res) & (1 | d));
- CONDITIONAL_SET_FLAG(XOR2(cc >> 30), F_OF);
- CONDITIONAL_SET_FLAG(cc & 0x8, F_AF);
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the OR instruction and side effects.
-****************************************************************************/
-u8 or_byte(u8 d, u8 s)
-{
- register u8 res; /* all operands in native machine order */
-
- res = d | s;
- CLEAR_FLAG(F_OF);
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_AF);
- CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
- CONDITIONAL_SET_FLAG(res == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res), F_PF);
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the OR instruction and side effects.
-****************************************************************************/
-u16 or_word(u16 d, u16 s)
-{
- register u16 res; /* all operands in native machine order */
-
- res = d | s;
- /* set the carry flag to be bit 8 */
- CLEAR_FLAG(F_OF);
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_AF);
- CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
- CONDITIONAL_SET_FLAG(res == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the OR instruction and side effects.
-****************************************************************************/
-u32 or_long(u32 d, u32 s)
-{
- register u32 res; /* all operands in native machine order */
-
- res = d | s;
-
- /* set the carry flag to be bit 8 */
- CLEAR_FLAG(F_OF);
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_AF);
- CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
- CONDITIONAL_SET_FLAG(res == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the OR instruction and side effects.
-****************************************************************************/
-u8 neg_byte(u8 s)
-{
- register u8 res;
- register u8 bc;
-
- CONDITIONAL_SET_FLAG(s != 0, F_CF);
- res = (u8)-s;
- CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res), F_PF);
- /* calculate the borrow chain --- modified such that d=0.
- substitutiing d=0 into bc= res&(~d|s)|(~d&s);
- (the one used for sub) and simplifying, since ~d=0xff...,
- ~d|s == 0xffff..., and res&0xfff... == res. Similarly
- ~d&s == s. So the simplified result is: */
- bc = res | s;
- CONDITIONAL_SET_FLAG(XOR2(bc >> 6), F_OF);
- CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the OR instruction and side effects.
-****************************************************************************/
-u16 neg_word(u16 s)
-{
- register u16 res;
- register u16 bc;
-
- CONDITIONAL_SET_FLAG(s != 0, F_CF);
- res = (u16)-s;
- CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the borrow chain --- modified such that d=0.
- substitutiing d=0 into bc= res&(~d|s)|(~d&s);
- (the one used for sub) and simplifying, since ~d=0xff...,
- ~d|s == 0xffff..., and res&0xfff... == res. Similarly
- ~d&s == s. So the simplified result is: */
- bc = res | s;
- CONDITIONAL_SET_FLAG(XOR2(bc >> 14), F_OF);
- CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the OR instruction and side effects.
-****************************************************************************/
-u32 neg_long(u32 s)
-{
- register u32 res;
- register u32 bc;
-
- CONDITIONAL_SET_FLAG(s != 0, F_CF);
- res = (u32)-s;
- CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the borrow chain --- modified such that d=0.
- substitutiing d=0 into bc= res&(~d|s)|(~d&s);
- (the one used for sub) and simplifying, since ~d=0xff...,
- ~d|s == 0xffff..., and res&0xfff... == res. Similarly
- ~d&s == s. So the simplified result is: */
- bc = res | s;
- CONDITIONAL_SET_FLAG(XOR2(bc >> 30), F_OF);
- CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the NOT instruction and side effects.
-****************************************************************************/
-u8 not_byte(u8 s)
-{
- return ~s;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the NOT instruction and side effects.
-****************************************************************************/
-u16 not_word(u16 s)
-{
- return ~s;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the NOT instruction and side effects.
-****************************************************************************/
-u32 not_long(u32 s)
-{
- return ~s;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the RCL instruction and side effects.
-****************************************************************************/
-u8 rcl_byte(u8 d, u8 s)
-{
- register unsigned int res, cnt, mask, cf;
-
- /* s is the rotate distance. It varies from 0 - 8. */
- /* have
-
- CF B_7 B_6 B_5 B_4 B_3 B_2 B_1 B_0
-
- want to rotate through the carry by "s" bits. We could
- loop, but that's inefficient. So the width is 9,
- and we split into three parts:
-
- The new carry flag (was B_n)
- the stuff in B_n-1 .. B_0
- the stuff in B_7 .. B_n+1
-
- The new rotate is done mod 9, and given this,
- for a rotation of n bits (mod 9) the new carry flag is
- then located n bits from the MSB. The low part is
- then shifted up cnt bits, and the high part is or'd
- in. Using CAPS for new values, and lowercase for the
- original values, this can be expressed as:
-
- IF n > 0
- 1) CF <- b_(8-n)
- 2) B_(7) .. B_(n) <- b_(8-(n+1)) .. b_0
- 3) B_(n-1) <- cf
- 4) B_(n-2) .. B_0 <- b_7 .. b_(8-(n-1))
- */
- res = d;
- if ((cnt = s % 9) != 0) {
- /* extract the new CARRY FLAG. */
- /* CF <- b_(8-n) */
- cf = (d >> (8 - cnt)) & 0x1;
-
- /* get the low stuff which rotated
- into the range B_7 .. B_cnt */
- /* B_(7) .. B_(n) <- b_(8-(n+1)) .. b_0 */
- /* note that the right hand side done by the mask */
- res = (d << cnt) & 0xff;
-
- /* now the high stuff which rotated around
- into the positions B_cnt-2 .. B_0 */
- /* B_(n-2) .. B_0 <- b_7 .. b_(8-(n-1)) */
- /* shift it downward, 7-(n-2) = 9-n positions.
- and mask off the result before or'ing in.
- */
- mask = (1 << (cnt - 1)) - 1;
- res |= (d >> (9 - cnt)) & mask;
-
- /* if the carry flag was set, or it in. */
- if (ACCESS_FLAG(F_CF)) { /* carry flag is set */
- /* B_(n-1) <- cf */
- res |= 1 << (cnt - 1);
- }
- /* set the new carry flag, based on the variable "cf" */
- CONDITIONAL_SET_FLAG(cf, F_CF);
- /* OVERFLOW is set *IFF* cnt==1, then it is the
- xor of CF and the most significant bit. Blecck. */
- /* parenthesized this expression since it appears to
- be causing OF to be misset */
- CONDITIONAL_SET_FLAG(cnt == 1 && XOR2(cf + ((res >> 6) & 0x2)),
- F_OF);
-
- }
- return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the RCL instruction and side effects.
-****************************************************************************/
-u16 rcl_word(u16 d, u8 s)
-{
- register unsigned int res, cnt, mask, cf;
-
- res = d;
- if ((cnt = s % 17) != 0) {
- cf = (d >> (16 - cnt)) & 0x1;
- res = (d << cnt) & 0xffff;
- mask = (1 << (cnt - 1)) - 1;
- res |= (d >> (17 - cnt)) & mask;
- if (ACCESS_FLAG(F_CF)) {
- res |= 1 << (cnt - 1);
- }
- CONDITIONAL_SET_FLAG(cf, F_CF);
- CONDITIONAL_SET_FLAG(cnt == 1 && XOR2(cf + ((res >> 14) & 0x2)),
- F_OF);
- }
- return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the RCL instruction and side effects.
-****************************************************************************/
-u32 rcl_long(u32 d, u8 s)
-{
- register u32 res, cnt, mask, cf;
-
- res = d;
- if ((cnt = s % 33) != 0) {
- cf = (d >> (32 - cnt)) & 0x1;
- res = (d << cnt) & 0xffffffff;
- mask = (1 << (cnt - 1)) - 1;
- res |= (d >> (33 - cnt)) & mask;
- if (ACCESS_FLAG(F_CF)) { /* carry flag is set */
- res |= 1 << (cnt - 1);
- }
- CONDITIONAL_SET_FLAG(cf, F_CF);
- CONDITIONAL_SET_FLAG(cnt == 1 && XOR2(cf + ((res >> 30) & 0x2)),
- F_OF);
- }
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the RCR instruction and side effects.
-****************************************************************************/
-u8 rcr_byte(u8 d, u8 s)
-{
- u32 res, cnt;
- u32 mask, cf, ocf = 0;
-
- /* rotate right through carry */
- /*
- s is the rotate distance. It varies from 0 - 8.
- d is the byte object rotated.
-
- have
-
- CF B_7 B_6 B_5 B_4 B_3 B_2 B_1 B_0
-
- The new rotate is done mod 9, and given this,
- for a rotation of n bits (mod 9) the new carry flag is
- then located n bits from the LSB. The low part is
- then shifted up cnt bits, and the high part is or'd
- in. Using CAPS for new values, and lowercase for the
- original values, this can be expressed as:
-
- IF n > 0
- 1) CF <- b_(n-1)
- 2) B_(8-(n+1)) .. B_(0) <- b_(7) .. b_(n)
- 3) B_(8-n) <- cf
- 4) B_(7) .. B_(8-(n-1)) <- b_(n-2) .. b_(0)
- */
- res = d;
- if ((cnt = s % 9) != 0) {
- /* extract the new CARRY FLAG. */
- /* CF <- b_(n-1) */
- if (cnt == 1) {
- cf = d & 0x1;
- /* note hackery here. Access_flag(..) evaluates to either
- 0 if flag not set
- non-zero if flag is set.
- doing access_flag(..) != 0 casts that into either
- 0..1 in any representation of the flags register
- (i.e. packed bit array or unpacked.)
- */
- ocf = ACCESS_FLAG(F_CF) != 0;
- } else
- cf = (d >> (cnt - 1)) & 0x1;
-
- /* B_(8-(n+1)) .. B_(0) <- b_(7) .. b_n */
- /* note that the right hand side done by the mask
- This is effectively done by shifting the
- object to the right. The result must be masked,
- in case the object came in and was treated
- as a negative number. Needed??? */
-
- mask = (1 << (8 - cnt)) - 1;
- res = (d >> cnt) & mask;
-
- /* now the high stuff which rotated around
- into the positions B_cnt-2 .. B_0 */
- /* B_(7) .. B_(8-(n-1)) <- b_(n-2) .. b_(0) */
- /* shift it downward, 7-(n-2) = 9-n positions.
- and mask off the result before or'ing in.
- */
- res |= (d << (9 - cnt));
-
- /* if the carry flag was set, or it in. */
- if (ACCESS_FLAG(F_CF)) { /* carry flag is set */
- /* B_(8-n) <- cf */
- res |= 1 << (8 - cnt);
- }
- /* set the new carry flag, based on the variable "cf" */
- CONDITIONAL_SET_FLAG(cf, F_CF);
- /* OVERFLOW is set *IFF* cnt==1, then it is the
- xor of CF and the most significant bit. Blecck. */
- /* parenthesized... */
- if (cnt == 1) {
- CONDITIONAL_SET_FLAG(XOR2(ocf + ((d >> 6) & 0x2)),
- F_OF);
- }
- }
- return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the RCR instruction and side effects.
-****************************************************************************/
-u16 rcr_word(u16 d, u8 s)
-{
- u32 res, cnt;
- u32 mask, cf, ocf = 0;
-
- /* rotate right through carry */
- res = d;
- if ((cnt = s % 17) != 0) {
- if (cnt == 1) {
- cf = d & 0x1;
- ocf = ACCESS_FLAG(F_CF) != 0;
- } else
- cf = (d >> (cnt - 1)) & 0x1;
- mask = (1 << (16 - cnt)) - 1;
- res = (d >> cnt) & mask;
- res |= (d << (17 - cnt));
- if (ACCESS_FLAG(F_CF)) {
- res |= 1 << (16 - cnt);
- }
- CONDITIONAL_SET_FLAG(cf, F_CF);
- if (cnt == 1) {
- CONDITIONAL_SET_FLAG(XOR2(ocf + ((d >> 14) & 0x2)),
- F_OF);
- }
- }
- return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the RCR instruction and side effects.
-****************************************************************************/
-u32 rcr_long(u32 d, u8 s)
-{
- u32 res, cnt;
- u32 mask, cf, ocf = 0;
-
- /* rotate right through carry */
- res = d;
- if ((cnt = s % 33) != 0) {
- if (cnt == 1) {
- cf = d & 0x1;
- ocf = ACCESS_FLAG(F_CF) != 0;
- } else
- cf = (d >> (cnt - 1)) & 0x1;
- mask = (1 << (32 - cnt)) - 1;
- res = (d >> cnt) & mask;
- if (cnt != 1)
- res |= (d << (33 - cnt));
- if (ACCESS_FLAG(F_CF)) { /* carry flag is set */
- res |= 1 << (32 - cnt);
- }
- CONDITIONAL_SET_FLAG(cf, F_CF);
- if (cnt == 1) {
- CONDITIONAL_SET_FLAG(XOR2(ocf + ((d >> 30) & 0x2)),
- F_OF);
- }
- }
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ROL instruction and side effects.
-****************************************************************************/
-u8 rol_byte(u8 d, u8 s)
-{
- register unsigned int res, cnt, mask;
-
- /* rotate left */
- /*
- s is the rotate distance. It varies from 0 - 8.
- d is the byte object rotated.
-
- have
-
- CF B_7 ... B_0
-
- The new rotate is done mod 8.
- Much simpler than the "rcl" or "rcr" operations.
-
- IF n > 0
- 1) B_(7) .. B_(n) <- b_(8-(n+1)) .. b_(0)
- 2) B_(n-1) .. B_(0) <- b_(7) .. b_(8-n)
- */
- res = d;
- if ((cnt = s % 8) != 0) {
- /* B_(7) .. B_(n) <- b_(8-(n+1)) .. b_(0) */
- res = (d << cnt);
-
- /* B_(n-1) .. B_(0) <- b_(7) .. b_(8-n) */
- mask = (1 << cnt) - 1;
- res |= (d >> (8 - cnt)) & mask;
-
- /* set the new carry flag, Note that it is the low order
- bit of the result!!! */
- CONDITIONAL_SET_FLAG(res & 0x1, F_CF);
- /* OVERFLOW is set *IFF* s==1, then it is the
- xor of CF and the most significant bit. Blecck. */
- CONDITIONAL_SET_FLAG(s == 1 &&
- XOR2((res & 0x1) + ((res >> 6) & 0x2)),
- F_OF);
- } if (s != 0) {
- /* set the new carry flag, Note that it is the low order
- bit of the result!!! */
- CONDITIONAL_SET_FLAG(res & 0x1, F_CF);
- }
- return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ROL instruction and side effects.
-****************************************************************************/
-u16 rol_word(u16 d, u8 s)
-{
- register unsigned int res, cnt, mask;
-
- res = d;
- if ((cnt = s % 16) != 0) {
- res = (d << cnt);
- mask = (1 << cnt) - 1;
- res |= (d >> (16 - cnt)) & mask;
- CONDITIONAL_SET_FLAG(res & 0x1, F_CF);
- CONDITIONAL_SET_FLAG(s == 1 &&
- XOR2((res & 0x1) + ((res >> 14) & 0x2)),
- F_OF);
- } if (s != 0) {
- /* set the new carry flag, Note that it is the low order
- bit of the result!!! */
- CONDITIONAL_SET_FLAG(res & 0x1, F_CF);
- }
- return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ROL instruction and side effects.
-****************************************************************************/
-u32 rol_long(u32 d, u8 s)
-{
- register u32 res, cnt, mask;
-
- res = d;
- if ((cnt = s % 32) != 0) {
- res = (d << cnt);
- mask = (1 << cnt) - 1;
- res |= (d >> (32 - cnt)) & mask;
- CONDITIONAL_SET_FLAG(res & 0x1, F_CF);
- CONDITIONAL_SET_FLAG(s == 1 &&
- XOR2((res & 0x1) + ((res >> 30) & 0x2)),
- F_OF);
- } if (s != 0) {
- /* set the new carry flag, Note that it is the low order
- bit of the result!!! */
- CONDITIONAL_SET_FLAG(res & 0x1, F_CF);
- }
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ROR instruction and side effects.
-****************************************************************************/
-u8 ror_byte(u8 d, u8 s)
-{
- register unsigned int res, cnt, mask;
-
- /* rotate right */
- /*
- s is the rotate distance. It varies from 0 - 8.
- d is the byte object rotated.
-
- have
-
- B_7 ... B_0
-
- The rotate is done mod 8.
-
- IF n > 0
- 1) B_(8-(n+1)) .. B_(0) <- b_(7) .. b_(n)
- 2) B_(7) .. B_(8-n) <- b_(n-1) .. b_(0)
- */
- res = d;
- if ((cnt = s % 8) != 0) { /* not a typo, do nada if cnt==0 */
- /* B_(7) .. B_(8-n) <- b_(n-1) .. b_(0) */
- res = (d << (8 - cnt));
-
- /* B_(8-(n+1)) .. B_(0) <- b_(7) .. b_(n) */
- mask = (1 << (8 - cnt)) - 1;
- res |= (d >> (cnt)) & mask;
-
- /* set the new carry flag, Note that it is the low order
- bit of the result!!! */
- CONDITIONAL_SET_FLAG(res & 0x80, F_CF);
- /* OVERFLOW is set *IFF* s==1, then it is the
- xor of the two most significant bits. Blecck. */
- CONDITIONAL_SET_FLAG(s == 1 && XOR2(res >> 6), F_OF);
- } else if (s != 0) {
- /* set the new carry flag, Note that it is the low order
- bit of the result!!! */
- CONDITIONAL_SET_FLAG(res & 0x80, F_CF);
- }
- return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ROR instruction and side effects.
-****************************************************************************/
-u16 ror_word(u16 d, u8 s)
-{
- register unsigned int res, cnt, mask;
-
- res = d;
- if ((cnt = s % 16) != 0) {
- res = (d << (16 - cnt));
- mask = (1 << (16 - cnt)) - 1;
- res |= (d >> (cnt)) & mask;
- CONDITIONAL_SET_FLAG(res & 0x8000, F_CF);
- CONDITIONAL_SET_FLAG(s == 1 && XOR2(res >> 14), F_OF);
- } else if (s != 0) {
- /* set the new carry flag, Note that it is the low order
- bit of the result!!! */
- CONDITIONAL_SET_FLAG(res & 0x8000, F_CF);
- }
- return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the ROR instruction and side effects.
-****************************************************************************/
-u32 ror_long(u32 d, u8 s)
-{
- register u32 res, cnt, mask;
-
- res = d;
- if ((cnt = s % 32) != 0) {
- res = (d << (32 - cnt));
- mask = (1 << (32 - cnt)) - 1;
- res |= (d >> (cnt)) & mask;
- CONDITIONAL_SET_FLAG(res & 0x80000000, F_CF);
- CONDITIONAL_SET_FLAG(s == 1 && XOR2(res >> 30), F_OF);
- } else if (s != 0) {
- /* set the new carry flag, Note that it is the low order
- bit of the result!!! */
- CONDITIONAL_SET_FLAG(res & 0x80000000, F_CF);
- }
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SHL instruction and side effects.
-****************************************************************************/
-u8 shl_byte(u8 d, u8 s)
-{
- unsigned int cnt, res, cf;
-
- if (s < 8) {
- cnt = s % 8;
-
- /* last bit shifted out goes into carry flag */
- if (cnt > 0) {
- res = d << cnt;
- cf = d & (1 << (8 - cnt));
- CONDITIONAL_SET_FLAG(cf, F_CF);
- CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- } else {
- res = (u8) d;
- }
-
- if (cnt == 1) {
- /* Needs simplification. */
- CONDITIONAL_SET_FLAG(
- (((res & 0x80) == 0x80) ^
- (ACCESS_FLAG(F_CF) != 0)),
- /* was (M.x86.R_FLG&F_CF)==F_CF)), */
- F_OF);
- } else {
- CLEAR_FLAG(F_OF);
- }
- } else {
- res = 0;
- CONDITIONAL_SET_FLAG((d << (s-1)) & 0x80, F_CF);
- CLEAR_FLAG(F_OF);
- CLEAR_FLAG(F_SF);
- SET_FLAG(F_PF);
- SET_FLAG(F_ZF);
- }
- return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SHL instruction and side effects.
-****************************************************************************/
-u16 shl_word(u16 d, u8 s)
-{
- unsigned int cnt, res, cf;
-
- if (s < 16) {
- cnt = s % 16;
- if (cnt > 0) {
- res = d << cnt;
- cf = d & (1 << (16 - cnt));
- CONDITIONAL_SET_FLAG(cf, F_CF);
- CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- } else {
- res = (u16) d;
- }
-
- if (cnt == 1) {
- CONDITIONAL_SET_FLAG(
- (((res & 0x8000) == 0x8000) ^
- (ACCESS_FLAG(F_CF) != 0)),
- F_OF);
- } else {
- CLEAR_FLAG(F_OF);
- }
- } else {
- res = 0;
- CONDITIONAL_SET_FLAG((d << (s-1)) & 0x8000, F_CF);
- CLEAR_FLAG(F_OF);
- CLEAR_FLAG(F_SF);
- SET_FLAG(F_PF);
- SET_FLAG(F_ZF);
- }
- return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SHL instruction and side effects.
-****************************************************************************/
-u32 shl_long(u32 d, u8 s)
-{
- unsigned int cnt, res, cf;
-
- if (s < 32) {
- cnt = s % 32;
- if (cnt > 0) {
- res = d << cnt;
- cf = d & (1 << (32 - cnt));
- CONDITIONAL_SET_FLAG(cf, F_CF);
- CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- } else {
- res = d;
- }
- if (cnt == 1) {
- CONDITIONAL_SET_FLAG((((res & 0x80000000) == 0x80000000) ^
- (ACCESS_FLAG(F_CF) != 0)), F_OF);
- } else {
- CLEAR_FLAG(F_OF);
- }
- } else {
- res = 0;
- CONDITIONAL_SET_FLAG((d << (s-1)) & 0x80000000, F_CF);
- CLEAR_FLAG(F_OF);
- CLEAR_FLAG(F_SF);
- SET_FLAG(F_PF);
- SET_FLAG(F_ZF);
- }
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SHR instruction and side effects.
-****************************************************************************/
-u8 shr_byte(u8 d, u8 s)
-{
- unsigned int cnt, res, cf;
-
- if (s < 8) {
- cnt = s % 8;
- if (cnt > 0) {
- cf = d & (1 << (cnt - 1));
- res = d >> cnt;
- CONDITIONAL_SET_FLAG(cf, F_CF);
- CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- } else {
- res = (u8) d;
- }
-
- if (cnt == 1) {
- CONDITIONAL_SET_FLAG(XOR2(res >> 6), F_OF);
- } else {
- CLEAR_FLAG(F_OF);
- }
- } else {
- res = 0;
- CONDITIONAL_SET_FLAG((d >> (s-1)) & 0x1, F_CF);
- CLEAR_FLAG(F_OF);
- CLEAR_FLAG(F_SF);
- SET_FLAG(F_PF);
- SET_FLAG(F_ZF);
- }
- return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SHR instruction and side effects.
-****************************************************************************/
-u16 shr_word(u16 d, u8 s)
-{
- unsigned int cnt, res, cf;
-
- if (s < 16) {
- cnt = s % 16;
- if (cnt > 0) {
- cf = d & (1 << (cnt - 1));
- res = d >> cnt;
- CONDITIONAL_SET_FLAG(cf, F_CF);
- CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- } else {
- res = d;
- }
-
- if (cnt == 1) {
- CONDITIONAL_SET_FLAG(XOR2(res >> 14), F_OF);
- } else {
- CLEAR_FLAG(F_OF);
- }
- } else {
- res = 0;
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- SET_FLAG(F_ZF);
- CLEAR_FLAG(F_SF);
- CLEAR_FLAG(F_PF);
- }
- return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SHR instruction and side effects.
-****************************************************************************/
-u32 shr_long(u32 d, u8 s)
-{
- unsigned int cnt, res, cf;
-
- if (s < 32) {
- cnt = s % 32;
- if (cnt > 0) {
- cf = d & (1 << (cnt - 1));
- res = d >> cnt;
- CONDITIONAL_SET_FLAG(cf, F_CF);
- CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- } else {
- res = d;
- }
- if (cnt == 1) {
- CONDITIONAL_SET_FLAG(XOR2(res >> 30), F_OF);
- } else {
- CLEAR_FLAG(F_OF);
- }
- } else {
- res = 0;
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- SET_FLAG(F_ZF);
- CLEAR_FLAG(F_SF);
- CLEAR_FLAG(F_PF);
- }
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SAR instruction and side effects.
-****************************************************************************/
-u8 sar_byte(u8 d, u8 s)
-{
- unsigned int cnt, res, cf, mask, sf;
-
- res = d;
- sf = d & 0x80;
- cnt = s % 8;
- if (cnt > 0 && cnt < 8) {
- mask = (1 << (8 - cnt)) - 1;
- cf = d & (1 << (cnt - 1));
- res = (d >> cnt) & mask;
- CONDITIONAL_SET_FLAG(cf, F_CF);
- if (sf) {
- res |= ~mask;
- }
- CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
- } else if (cnt >= 8) {
- if (sf) {
- res = 0xff;
- SET_FLAG(F_CF);
- CLEAR_FLAG(F_ZF);
- SET_FLAG(F_SF);
- SET_FLAG(F_PF);
- } else {
- res = 0;
- CLEAR_FLAG(F_CF);
- SET_FLAG(F_ZF);
- CLEAR_FLAG(F_SF);
- CLEAR_FLAG(F_PF);
- }
- }
- return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SAR instruction and side effects.
-****************************************************************************/
-u16 sar_word(u16 d, u8 s)
-{
- unsigned int cnt, res, cf, mask, sf;
-
- sf = d & 0x8000;
- cnt = s % 16;
- res = d;
- if (cnt > 0 && cnt < 16) {
- mask = (1 << (16 - cnt)) - 1;
- cf = d & (1 << (cnt - 1));
- res = (d >> cnt) & mask;
- CONDITIONAL_SET_FLAG(cf, F_CF);
- if (sf) {
- res |= ~mask;
- }
- CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- } else if (cnt >= 16) {
- if (sf) {
- res = 0xffff;
- SET_FLAG(F_CF);
- CLEAR_FLAG(F_ZF);
- SET_FLAG(F_SF);
- SET_FLAG(F_PF);
- } else {
- res = 0;
- CLEAR_FLAG(F_CF);
- SET_FLAG(F_ZF);
- CLEAR_FLAG(F_SF);
- CLEAR_FLAG(F_PF);
- }
- }
- return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SAR instruction and side effects.
-****************************************************************************/
-u32 sar_long(u32 d, u8 s)
-{
- u32 cnt, res, cf, mask, sf;
-
- sf = d & 0x80000000;
- cnt = s % 32;
- res = d;
- if (cnt > 0 && cnt < 32) {
- mask = (1 << (32 - cnt)) - 1;
- cf = d & (1 << (cnt - 1));
- res = (d >> cnt) & mask;
- CONDITIONAL_SET_FLAG(cf, F_CF);
- if (sf) {
- res |= ~mask;
- }
- CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- } else if (cnt >= 32) {
- if (sf) {
- res = 0xffffffff;
- SET_FLAG(F_CF);
- CLEAR_FLAG(F_ZF);
- SET_FLAG(F_SF);
- SET_FLAG(F_PF);
- } else {
- res = 0;
- CLEAR_FLAG(F_CF);
- SET_FLAG(F_ZF);
- CLEAR_FLAG(F_SF);
- CLEAR_FLAG(F_PF);
- }
- }
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SHLD instruction and side effects.
-****************************************************************************/
-u16 shld_word (u16 d, u16 fill, u8 s)
-{
- unsigned int cnt, res, cf;
-
- if (s < 16) {
- cnt = s % 16;
- if (cnt > 0) {
- res = (d << cnt) | (fill >> (16-cnt));
- cf = d & (1 << (16 - cnt));
- CONDITIONAL_SET_FLAG(cf, F_CF);
- CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- } else {
- res = d;
- }
- if (cnt == 1) {
- CONDITIONAL_SET_FLAG((((res & 0x8000) == 0x8000) ^
- (ACCESS_FLAG(F_CF) != 0)), F_OF);
- } else {
- CLEAR_FLAG(F_OF);
- }
- } else {
- res = 0;
- CONDITIONAL_SET_FLAG((d << (s-1)) & 0x8000, F_CF);
- CLEAR_FLAG(F_OF);
- CLEAR_FLAG(F_SF);
- SET_FLAG(F_PF);
- SET_FLAG(F_ZF);
- }
- return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SHLD instruction and side effects.
-****************************************************************************/
-u32 shld_long (u32 d, u32 fill, u8 s)
-{
- unsigned int cnt, res, cf;
-
- if (s < 32) {
- cnt = s % 32;
- if (cnt > 0) {
- res = (d << cnt) | (fill >> (32-cnt));
- cf = d & (1 << (32 - cnt));
- CONDITIONAL_SET_FLAG(cf, F_CF);
- CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- } else {
- res = d;
- }
- if (cnt == 1) {
- CONDITIONAL_SET_FLAG((((res & 0x80000000) == 0x80000000) ^
- (ACCESS_FLAG(F_CF) != 0)), F_OF);
- } else {
- CLEAR_FLAG(F_OF);
- }
- } else {
- res = 0;
- CONDITIONAL_SET_FLAG((d << (s-1)) & 0x80000000, F_CF);
- CLEAR_FLAG(F_OF);
- CLEAR_FLAG(F_SF);
- SET_FLAG(F_PF);
- SET_FLAG(F_ZF);
- }
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SHRD instruction and side effects.
-****************************************************************************/
-u16 shrd_word (u16 d, u16 fill, u8 s)
-{
- unsigned int cnt, res, cf;
-
- if (s < 16) {
- cnt = s % 16;
- if (cnt > 0) {
- cf = d & (1 << (cnt - 1));
- res = (d >> cnt) | (fill << (16 - cnt));
- CONDITIONAL_SET_FLAG(cf, F_CF);
- CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- } else {
- res = d;
- }
-
- if (cnt == 1) {
- CONDITIONAL_SET_FLAG(XOR2(res >> 14), F_OF);
- } else {
- CLEAR_FLAG(F_OF);
- }
- } else {
- res = 0;
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- SET_FLAG(F_ZF);
- CLEAR_FLAG(F_SF);
- CLEAR_FLAG(F_PF);
- }
- return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SHRD instruction and side effects.
-****************************************************************************/
-u32 shrd_long (u32 d, u32 fill, u8 s)
-{
- unsigned int cnt, res, cf;
-
- if (s < 32) {
- cnt = s % 32;
- if (cnt > 0) {
- cf = d & (1 << (cnt - 1));
- res = (d >> cnt) | (fill << (32 - cnt));
- CONDITIONAL_SET_FLAG(cf, F_CF);
- CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- } else {
- res = d;
- }
- if (cnt == 1) {
- CONDITIONAL_SET_FLAG(XOR2(res >> 30), F_OF);
- } else {
- CLEAR_FLAG(F_OF);
- }
- } else {
- res = 0;
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- SET_FLAG(F_ZF);
- CLEAR_FLAG(F_SF);
- CLEAR_FLAG(F_PF);
- }
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SBB instruction and side effects.
-****************************************************************************/
-u8 sbb_byte(u8 d, u8 s)
-{
- register u32 res; /* all operands in native machine order */
- register u32 bc;
-
- if (ACCESS_FLAG(F_CF))
- res = d - s - 1;
- else
- res = d - s;
- CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
- CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the borrow chain. See note at top */
- bc = (res & (~d | s)) | (~d & s);
- CONDITIONAL_SET_FLAG(bc & 0x80, F_CF);
- CONDITIONAL_SET_FLAG(XOR2(bc >> 6), F_OF);
- CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
- return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SBB instruction and side effects.
-****************************************************************************/
-u16 sbb_word(u16 d, u16 s)
-{
- register u32 res; /* all operands in native machine order */
- register u32 bc;
-
- if (ACCESS_FLAG(F_CF))
- res = d - s - 1;
- else
- res = d - s;
- CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
- CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the borrow chain. See note at top */
- bc = (res & (~d | s)) | (~d & s);
- CONDITIONAL_SET_FLAG(bc & 0x8000, F_CF);
- CONDITIONAL_SET_FLAG(XOR2(bc >> 14), F_OF);
- CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
- return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SBB instruction and side effects.
-****************************************************************************/
-u32 sbb_long(u32 d, u32 s)
-{
- register u32 res; /* all operands in native machine order */
- register u32 bc;
-
- if (ACCESS_FLAG(F_CF))
- res = d - s - 1;
- else
- res = d - s;
- CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
- CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the borrow chain. See note at top */
- bc = (res & (~d | s)) | (~d & s);
- CONDITIONAL_SET_FLAG(bc & 0x80000000, F_CF);
- CONDITIONAL_SET_FLAG(XOR2(bc >> 30), F_OF);
- CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SUB instruction and side effects.
-****************************************************************************/
-u8 sub_byte(u8 d, u8 s)
-{
- register u32 res; /* all operands in native machine order */
- register u32 bc;
-
- res = d - s;
- CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
- CONDITIONAL_SET_FLAG((res & 0xff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the borrow chain. See note at top */
- bc = (res & (~d | s)) | (~d & s);
- CONDITIONAL_SET_FLAG(bc & 0x80, F_CF);
- CONDITIONAL_SET_FLAG(XOR2(bc >> 6), F_OF);
- CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
- return (u8)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SUB instruction and side effects.
-****************************************************************************/
-u16 sub_word(u16 d, u16 s)
-{
- register u32 res; /* all operands in native machine order */
- register u32 bc;
-
- res = d - s;
- CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
- CONDITIONAL_SET_FLAG((res & 0xffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the borrow chain. See note at top */
- bc = (res & (~d | s)) | (~d & s);
- CONDITIONAL_SET_FLAG(bc & 0x8000, F_CF);
- CONDITIONAL_SET_FLAG(XOR2(bc >> 14), F_OF);
- CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
- return (u16)res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the SUB instruction and side effects.
-****************************************************************************/
-u32 sub_long(u32 d, u32 s)
-{
- register u32 res; /* all operands in native machine order */
- register u32 bc;
-
- res = d - s;
- CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
- CONDITIONAL_SET_FLAG((res & 0xffffffff) == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
-
- /* calculate the borrow chain. See note at top */
- bc = (res & (~d | s)) | (~d & s);
- CONDITIONAL_SET_FLAG(bc & 0x80000000, F_CF);
- CONDITIONAL_SET_FLAG(XOR2(bc >> 30), F_OF);
- CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the TEST instruction and side effects.
-****************************************************************************/
-void test_byte(u8 d, u8 s)
-{
- register u32 res; /* all operands in native machine order */
-
- res = d & s;
-
- CLEAR_FLAG(F_OF);
- CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
- CONDITIONAL_SET_FLAG(res == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- /* AF == dont care */
- CLEAR_FLAG(F_CF);
-}
-
-/****************************************************************************
-REMARKS:
-Implements the TEST instruction and side effects.
-****************************************************************************/
-void test_word(u16 d, u16 s)
-{
- register u32 res; /* all operands in native machine order */
-
- res = d & s;
-
- CLEAR_FLAG(F_OF);
- CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
- CONDITIONAL_SET_FLAG(res == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- /* AF == dont care */
- CLEAR_FLAG(F_CF);
-}
-
-/****************************************************************************
-REMARKS:
-Implements the TEST instruction and side effects.
-****************************************************************************/
-void test_long(u32 d, u32 s)
-{
- register u32 res; /* all operands in native machine order */
-
- res = d & s;
-
- CLEAR_FLAG(F_OF);
- CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
- CONDITIONAL_SET_FLAG(res == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- /* AF == dont care */
- CLEAR_FLAG(F_CF);
-}
-
-/****************************************************************************
-REMARKS:
-Implements the XOR instruction and side effects.
-****************************************************************************/
-u8 xor_byte(u8 d, u8 s)
-{
- register u8 res; /* all operands in native machine order */
-
- res = d ^ s;
- CLEAR_FLAG(F_OF);
- CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
- CONDITIONAL_SET_FLAG(res == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res), F_PF);
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_AF);
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the XOR instruction and side effects.
-****************************************************************************/
-u16 xor_word(u16 d, u16 s)
-{
- register u16 res; /* all operands in native machine order */
-
- res = d ^ s;
- CLEAR_FLAG(F_OF);
- CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
- CONDITIONAL_SET_FLAG(res == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_AF);
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the XOR instruction and side effects.
-****************************************************************************/
-u32 xor_long(u32 d, u32 s)
-{
- register u32 res; /* all operands in native machine order */
-
- res = d ^ s;
- CLEAR_FLAG(F_OF);
- CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
- CONDITIONAL_SET_FLAG(res == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(res & 0xff), F_PF);
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_AF);
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the IMUL instruction and side effects.
-****************************************************************************/
-void imul_byte(u8 s)
-{
- s16 res = (s16)((s8)M.x86.R_AL * (s8)s);
-
- M.x86.R_AX = res;
- if (((M.x86.R_AL & 0x80) == 0 && M.x86.R_AH == 0x00) ||
- ((M.x86.R_AL & 0x80) != 0 && M.x86.R_AH == 0xFF)) {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- } else {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- }
-}
-
-/****************************************************************************
-REMARKS:
-Implements the IMUL instruction and side effects.
-****************************************************************************/
-void imul_word(u16 s)
-{
- s32 res = (s16)M.x86.R_AX * (s16)s;
-
- M.x86.R_AX = (u16)res;
- M.x86.R_DX = (u16)(res >> 16);
- if (((M.x86.R_AX & 0x8000) == 0 && M.x86.R_DX == 0x00) ||
- ((M.x86.R_AX & 0x8000) != 0 && M.x86.R_DX == 0xFF)) {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- } else {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- }
-}
-
-/****************************************************************************
-REMARKS:
-Implements the IMUL instruction and side effects.
-****************************************************************************/
-void imul_long_direct(u32 *res_lo, u32* res_hi,u32 d, u32 s)
-{
-#ifdef __HAS_LONG_LONG__
- s64 res = (s32)d * (s32)s;
-
- *res_lo = (u32)res;
- *res_hi = (u32)(res >> 32);
-#else
- u32 d_lo,d_hi,d_sign;
- u32 s_lo,s_hi,s_sign;
- u32 rlo_lo,rlo_hi,rhi_lo;
-
- if ((d_sign = d & 0x80000000) != 0)
- d = -d;
- d_lo = d & 0xFFFF;
- d_hi = d >> 16;
- if ((s_sign = s & 0x80000000) != 0)
- s = -s;
- s_lo = s & 0xFFFF;
- s_hi = s >> 16;
- rlo_lo = d_lo * s_lo;
- rlo_hi = (d_hi * s_lo + d_lo * s_hi) + (rlo_lo >> 16);
- rhi_lo = d_hi * s_hi + (rlo_hi >> 16);
- *res_lo = (rlo_hi << 16) | (rlo_lo & 0xFFFF);
- *res_hi = rhi_lo;
- if (d_sign != s_sign) {
- d = ~*res_lo;
- s = (((d & 0xFFFF) + 1) >> 16) + (d >> 16);
- *res_lo = ~*res_lo+1;
- *res_hi = ~*res_hi+(s >> 16);
- }
-#endif
-}
-
-/****************************************************************************
-REMARKS:
-Implements the IMUL instruction and side effects.
-****************************************************************************/
-void imul_long(u32 s)
-{
- imul_long_direct(&M.x86.R_EAX,&M.x86.R_EDX,M.x86.R_EAX,s);
- if (((M.x86.R_EAX & 0x80000000) == 0 && M.x86.R_EDX == 0x00) ||
- ((M.x86.R_EAX & 0x80000000) != 0 && M.x86.R_EDX == 0xFF)) {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- } else {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- }
-}
-
-/****************************************************************************
-REMARKS:
-Implements the MUL instruction and side effects.
-****************************************************************************/
-void mul_byte(u8 s)
-{
- u16 res = (u16)(M.x86.R_AL * s);
-
- M.x86.R_AX = res;
- if (M.x86.R_AH == 0) {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- } else {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- }
-}
-
-/****************************************************************************
-REMARKS:
-Implements the MUL instruction and side effects.
-****************************************************************************/
-void mul_word(u16 s)
-{
- u32 res = M.x86.R_AX * s;
-
- M.x86.R_AX = (u16)res;
- M.x86.R_DX = (u16)(res >> 16);
- if (M.x86.R_DX == 0) {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- } else {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- }
-}
-
-/****************************************************************************
-REMARKS:
-Implements the MUL instruction and side effects.
-****************************************************************************/
-void mul_long(u32 s)
-{
-#ifdef __HAS_LONG_LONG__
- u64 res = (u32)M.x86.R_EAX * (u32)s;
-
- M.x86.R_EAX = (u32)res;
- M.x86.R_EDX = (u32)(res >> 32);
-#else
- u32 a,a_lo,a_hi;
- u32 s_lo,s_hi;
- u32 rlo_lo,rlo_hi,rhi_lo;
-
- a = M.x86.R_EAX;
- a_lo = a & 0xFFFF;
- a_hi = a >> 16;
- s_lo = s & 0xFFFF;
- s_hi = s >> 16;
- rlo_lo = a_lo * s_lo;
- rlo_hi = (a_hi * s_lo + a_lo * s_hi) + (rlo_lo >> 16);
- rhi_lo = a_hi * s_hi + (rlo_hi >> 16);
- M.x86.R_EAX = (rlo_hi << 16) | (rlo_lo & 0xFFFF);
- M.x86.R_EDX = rhi_lo;
-#endif
-
- if (M.x86.R_EDX == 0) {
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_OF);
- } else {
- SET_FLAG(F_CF);
- SET_FLAG(F_OF);
- }
-}
-
-/****************************************************************************
-REMARKS:
-Implements the IDIV instruction and side effects.
-****************************************************************************/
-void idiv_byte(u8 s)
-{
- s32 dvd, div, mod;
-
- dvd = (s16)M.x86.R_AX;
- if (s == 0) {
- x86emu_intr_raise(0);
- return;
- }
- div = dvd / (s8)s;
- mod = dvd % (s8)s;
- if (abs(div) > 0x7f) {
- x86emu_intr_raise(0);
- return;
- }
- M.x86.R_AL = (s8) div;
- M.x86.R_AH = (s8) mod;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the IDIV instruction and side effects.
-****************************************************************************/
-void idiv_word(u16 s)
-{
- s32 dvd, div, mod;
-
- dvd = (((s32)M.x86.R_DX) << 16) | M.x86.R_AX;
- if (s == 0) {
- x86emu_intr_raise(0);
- return;
- }
- div = dvd / (s16)s;
- mod = dvd % (s16)s;
- if (abs(div) > 0x7fff) {
- x86emu_intr_raise(0);
- return;
- }
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_SF);
- CONDITIONAL_SET_FLAG(div == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(mod & 0xff), F_PF);
-
- M.x86.R_AX = (u16)div;
- M.x86.R_DX = (u16)mod;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the IDIV instruction and side effects.
-****************************************************************************/
-void idiv_long(u32 s)
-{
-#ifdef __HAS_LONG_LONG__
- s64 dvd, div, mod;
-
- dvd = (((s64)M.x86.R_EDX) << 32) | M.x86.R_EAX;
- if (s == 0) {
- x86emu_intr_raise(0);
- return;
- }
- div = dvd / (s32)s;
- mod = dvd % (s32)s;
- if (abs(div) > 0x7fffffff) {
- x86emu_intr_raise(0);
- return;
- }
-#else
- s32 div = 0, mod;
- s32 h_dvd = M.x86.R_EDX;
- u32 l_dvd = M.x86.R_EAX;
- u32 abs_s = s & 0x7FFFFFFF;
- u32 abs_h_dvd = h_dvd & 0x7FFFFFFF;
- u32 h_s = abs_s >> 1;
- u32 l_s = abs_s << 31;
- int counter = 31;
- int carry;
-
- if (s == 0) {
- x86emu_intr_raise(0);
- return;
- }
- do {
- div <<= 1;
- carry = (l_dvd >= l_s) ? 0 : 1;
-
- if (abs_h_dvd < (h_s + carry)) {
- h_s >>= 1;
- l_s = abs_s << (--counter);
- continue;
- } else {
- abs_h_dvd -= (h_s + carry);
- l_dvd = carry ? ((0xFFFFFFFF - l_s) + l_dvd + 1)
- : (l_dvd - l_s);
- h_s >>= 1;
- l_s = abs_s << (--counter);
- div |= 1;
- continue;
- }
-
- } while (counter > -1);
- /* overflow */
- if (abs_h_dvd || (l_dvd > abs_s)) {
- x86emu_intr_raise(0);
- return;
- }
- /* sign */
- div |= ((h_dvd & 0x10000000) ^ (s & 0x10000000));
- mod = l_dvd;
-
-#endif
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_AF);
- CLEAR_FLAG(F_SF);
- SET_FLAG(F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(mod & 0xff), F_PF);
-
- M.x86.R_EAX = (u32)div;
- M.x86.R_EDX = (u32)mod;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the DIV instruction and side effects.
-****************************************************************************/
-void div_byte(u8 s)
-{
- u32 dvd, div, mod;
-
- dvd = M.x86.R_AX;
- if (s == 0) {
- x86emu_intr_raise(0);
- return;
- }
- div = dvd / (u8)s;
- mod = dvd % (u8)s;
- if (abs(div) > 0xff) {
- x86emu_intr_raise(0);
- return;
- }
- M.x86.R_AL = (u8)div;
- M.x86.R_AH = (u8)mod;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the DIV instruction and side effects.
-****************************************************************************/
-void div_word(u16 s)
-{
- u32 dvd, div, mod;
-
- dvd = (((u32)M.x86.R_DX) << 16) | M.x86.R_AX;
- if (s == 0) {
- x86emu_intr_raise(0);
- return;
- }
- div = dvd / (u16)s;
- mod = dvd % (u16)s;
- if (abs(div) > 0xffff) {
- x86emu_intr_raise(0);
- return;
- }
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_SF);
- CONDITIONAL_SET_FLAG(div == 0, F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(mod & 0xff), F_PF);
-
- M.x86.R_AX = (u16)div;
- M.x86.R_DX = (u16)mod;
-}
-
-/****************************************************************************
-REMARKS:
-Implements the DIV instruction and side effects.
-****************************************************************************/
-void div_long(u32 s)
-{
-#ifdef __HAS_LONG_LONG__
- u64 dvd, div, mod;
-
- dvd = (((u64)M.x86.R_EDX) << 32) | M.x86.R_EAX;
- if (s == 0) {
- x86emu_intr_raise(0);
- return;
- }
- div = dvd / (u32)s;
- mod = dvd % (u32)s;
- if (abs(div) > 0xffffffff) {
- x86emu_intr_raise(0);
- return;
- }
-#else
- s32 div = 0, mod;
- s32 h_dvd = M.x86.R_EDX;
- u32 l_dvd = M.x86.R_EAX;
-
- u32 h_s = s;
- u32 l_s = 0;
- int counter = 32;
- int carry;
-
- if (s == 0) {
- x86emu_intr_raise(0);
- return;
- }
- do {
- div <<= 1;
- carry = (l_dvd >= l_s) ? 0 : 1;
-
- if (h_dvd < (h_s + carry)) {
- h_s >>= 1;
- l_s = s << (--counter);
- continue;
- } else {
- h_dvd -= (h_s + carry);
- l_dvd = carry ? ((0xFFFFFFFF - l_s) + l_dvd + 1)
- : (l_dvd - l_s);
- h_s >>= 1;
- l_s = s << (--counter);
- div |= 1;
- continue;
- }
-
- } while (counter > -1);
- /* overflow */
- if (h_dvd || (l_dvd > s)) {
- x86emu_intr_raise(0);
- return;
- }
- mod = l_dvd;
-#endif
- CLEAR_FLAG(F_CF);
- CLEAR_FLAG(F_AF);
- CLEAR_FLAG(F_SF);
- SET_FLAG(F_ZF);
- CONDITIONAL_SET_FLAG(PARITY(mod & 0xff), F_PF);
-
- M.x86.R_EAX = (u32)div;
- M.x86.R_EDX = (u32)mod;
-}
-
-#endif /* __HAVE_INLINE_ASSEMBLER__ */
-
-/****************************************************************************
-REMARKS:
-Implements the IN string instruction and side effects.
-****************************************************************************/
-void ins(int size)
-{
- int inc = size;
-
- if (ACCESS_FLAG(F_DF)) {
- inc = -size;
- }
- if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
- /* dont care whether REPE or REPNE */
- /* in until CX is ZERO. */
- u32 count = ((M.x86.mode & SYSMODE_PREFIX_DATA) ?
- M.x86.R_ECX : M.x86.R_CX);
- switch (size) {
- case 1:
- while (count--) {
- store_data_byte_abs(M.x86.R_ES, M.x86.R_DI,
- (*sys_inb)(M.x86.R_DX));
- M.x86.R_DI += inc;
- }
- break;
-
- case 2:
- while (count--) {
- store_data_word_abs(M.x86.R_ES, M.x86.R_DI,
- (*sys_inw)(M.x86.R_DX));
- M.x86.R_DI += inc;
- }
- break;
- case 4:
- while (count--) {
- store_data_long_abs(M.x86.R_ES, M.x86.R_DI,
- (*sys_inl)(M.x86.R_DX));
- M.x86.R_DI += inc;
- break;
- }
- }
- M.x86.R_CX = 0;
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_ECX = 0;
- }
- M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
- } else {
- switch (size) {
- case 1:
- store_data_byte_abs(M.x86.R_ES, M.x86.R_DI,
- (*sys_inb)(M.x86.R_DX));
- break;
- case 2:
- store_data_word_abs(M.x86.R_ES, M.x86.R_DI,
- (*sys_inw)(M.x86.R_DX));
- break;
- case 4:
- store_data_long_abs(M.x86.R_ES, M.x86.R_DI,
- (*sys_inl)(M.x86.R_DX));
- break;
- }
- M.x86.R_DI += inc;
- }
-}
-
-/****************************************************************************
-REMARKS:
-Implements the OUT string instruction and side effects.
-****************************************************************************/
-void outs(int size)
-{
- int inc = size;
-
- if (ACCESS_FLAG(F_DF)) {
- inc = -size;
- }
- if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
- /* dont care whether REPE or REPNE */
- /* out until CX is ZERO. */
- u32 count = ((M.x86.mode & SYSMODE_PREFIX_DATA) ?
- M.x86.R_ECX : M.x86.R_CX);
- switch (size) {
- case 1:
- while (count--) {
- (*sys_outb)(M.x86.R_DX,
- fetch_data_byte_abs(M.x86.R_ES, M.x86.R_SI));
- M.x86.R_SI += inc;
- }
- break;
-
- case 2:
- while (count--) {
- (*sys_outw)(M.x86.R_DX,
- fetch_data_word_abs(M.x86.R_ES, M.x86.R_SI));
- M.x86.R_SI += inc;
- }
- break;
- case 4:
- while (count--) {
- (*sys_outl)(M.x86.R_DX,
- fetch_data_long_abs(M.x86.R_ES, M.x86.R_SI));
- M.x86.R_SI += inc;
- break;
- }
- }
- M.x86.R_CX = 0;
- if (M.x86.mode & SYSMODE_PREFIX_DATA) {
- M.x86.R_ECX = 0;
- }
- M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
- } else {
- switch (size) {
- case 1:
- (*sys_outb)(M.x86.R_DX,
- fetch_data_byte_abs(M.x86.R_ES, M.x86.R_SI));
- break;
- case 2:
- (*sys_outw)(M.x86.R_DX,
- fetch_data_word_abs(M.x86.R_ES, M.x86.R_SI));
- break;
- case 4:
- (*sys_outl)(M.x86.R_DX,
- fetch_data_long_abs(M.x86.R_ES, M.x86.R_SI));
- break;
- }
- M.x86.R_SI += inc;
- }
-}
-
-/****************************************************************************
-PARAMETERS:
-addr - Address to fetch word from
-
-REMARKS:
-Fetches a word from emulator memory using an absolute address.
-****************************************************************************/
-u16 mem_access_word(int addr)
-{
-DB( if (CHECK_MEM_ACCESS())
- x86emu_check_mem_access(addr);)
- return (*sys_rdw)(addr);
-}
-
-/****************************************************************************
-REMARKS:
-Pushes a word onto the stack.
-
-NOTE: Do not inline this, as (*sys_wrX) is already inline!
-****************************************************************************/
-void push_word(u16 w)
-{
-DB( if (CHECK_SP_ACCESS())
- x86emu_check_sp_access();)
- M.x86.R_SP -= 2;
- (*sys_wrw)(((u32)M.x86.R_SS << 4) + M.x86.R_SP, w);
-}
-
-/****************************************************************************
-REMARKS:
-Pushes a long onto the stack.
-
-NOTE: Do not inline this, as (*sys_wrX) is already inline!
-****************************************************************************/
-void push_long(u32 w)
-{
-DB( if (CHECK_SP_ACCESS())
- x86emu_check_sp_access();)
- M.x86.R_SP -= 4;
- (*sys_wrl)(((u32)M.x86.R_SS << 4) + M.x86.R_SP, w);
-}
-
-/****************************************************************************
-REMARKS:
-Pops a word from the stack.
-
-NOTE: Do not inline this, as (*sys_rdX) is already inline!
-****************************************************************************/
-u16 pop_word(void)
-{
- register u16 res;
-
-DB( if (CHECK_SP_ACCESS())
- x86emu_check_sp_access();)
- res = (*sys_rdw)(((u32)M.x86.R_SS << 4) + M.x86.R_SP);
- M.x86.R_SP += 2;
- return res;
-}
-
-/****************************************************************************
-REMARKS:
-Pops a long from the stack.
-
-NOTE: Do not inline this, as (*sys_rdX) is already inline!
-****************************************************************************/
-u32 pop_long(void)
-{
- register u32 res;
-
-DB( if (CHECK_SP_ACCESS())
- x86emu_check_sp_access();)
- res = (*sys_rdl)(((u32)M.x86.R_SS << 4) + M.x86.R_SP);
- M.x86.R_SP += 4;
- return res;
-}
-
-#ifdef __HAVE_INLINE_ASSEMBLER__
-
-u16 aaa_word (u16 d)
-{ return aaa_word_asm(&M.x86.R_EFLG,d); }
-
-u16 aas_word (u16 d)
-{ return aas_word_asm(&M.x86.R_EFLG,d); }
-
-u16 aad_word (u16 d)
-{ return aad_word_asm(&M.x86.R_EFLG,d); }
-
-u16 aam_word (u8 d)
-{ return aam_word_asm(&M.x86.R_EFLG,d); }
-
-u8 adc_byte (u8 d, u8 s)
-{ return adc_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 adc_word (u16 d, u16 s)
-{ return adc_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 adc_long (u32 d, u32 s)
-{ return adc_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 add_byte (u8 d, u8 s)
-{ return add_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 add_word (u16 d, u16 s)
-{ return add_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 add_long (u32 d, u32 s)
-{ return add_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 and_byte (u8 d, u8 s)
-{ return and_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 and_word (u16 d, u16 s)
-{ return and_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 and_long (u32 d, u32 s)
-{ return and_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 cmp_byte (u8 d, u8 s)
-{ return cmp_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 cmp_word (u16 d, u16 s)
-{ return cmp_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 cmp_long (u32 d, u32 s)
-{ return cmp_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 daa_byte (u8 d)
-{ return daa_byte_asm(&M.x86.R_EFLG,d); }
-
-u8 das_byte (u8 d)
-{ return das_byte_asm(&M.x86.R_EFLG,d); }
-
-u8 dec_byte (u8 d)
-{ return dec_byte_asm(&M.x86.R_EFLG,d); }
-
-u16 dec_word (u16 d)
-{ return dec_word_asm(&M.x86.R_EFLG,d); }
-
-u32 dec_long (u32 d)
-{ return dec_long_asm(&M.x86.R_EFLG,d); }
-
-u8 inc_byte (u8 d)
-{ return inc_byte_asm(&M.x86.R_EFLG,d); }
-
-u16 inc_word (u16 d)
-{ return inc_word_asm(&M.x86.R_EFLG,d); }
-
-u32 inc_long (u32 d)
-{ return inc_long_asm(&M.x86.R_EFLG,d); }
-
-u8 or_byte (u8 d, u8 s)
-{ return or_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 or_word (u16 d, u16 s)
-{ return or_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 or_long (u32 d, u32 s)
-{ return or_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 neg_byte (u8 s)
-{ return neg_byte_asm(&M.x86.R_EFLG,s); }
-
-u16 neg_word (u16 s)
-{ return neg_word_asm(&M.x86.R_EFLG,s); }
-
-u32 neg_long (u32 s)
-{ return neg_long_asm(&M.x86.R_EFLG,s); }
-
-u8 not_byte (u8 s)
-{ return not_byte_asm(&M.x86.R_EFLG,s); }
-
-u16 not_word (u16 s)
-{ return not_word_asm(&M.x86.R_EFLG,s); }
-
-u32 not_long (u32 s)
-{ return not_long_asm(&M.x86.R_EFLG,s); }
-
-u8 rcl_byte (u8 d, u8 s)
-{ return rcl_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 rcl_word (u16 d, u8 s)
-{ return rcl_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 rcl_long (u32 d, u8 s)
-{ return rcl_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 rcr_byte (u8 d, u8 s)
-{ return rcr_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 rcr_word (u16 d, u8 s)
-{ return rcr_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 rcr_long (u32 d, u8 s)
-{ return rcr_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 rol_byte (u8 d, u8 s)
-{ return rol_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 rol_word (u16 d, u8 s)
-{ return rol_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 rol_long (u32 d, u8 s)
-{ return rol_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 ror_byte (u8 d, u8 s)
-{ return ror_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 ror_word (u16 d, u8 s)
-{ return ror_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 ror_long (u32 d, u8 s)
-{ return ror_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 shl_byte (u8 d, u8 s)
-{ return shl_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 shl_word (u16 d, u8 s)
-{ return shl_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 shl_long (u32 d, u8 s)
-{ return shl_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 shr_byte (u8 d, u8 s)
-{ return shr_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 shr_word (u16 d, u8 s)
-{ return shr_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 shr_long (u32 d, u8 s)
-{ return shr_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 sar_byte (u8 d, u8 s)
-{ return sar_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 sar_word (u16 d, u8 s)
-{ return sar_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 sar_long (u32 d, u8 s)
-{ return sar_long_asm(&M.x86.R_EFLG,d,s); }
-
-u16 shld_word (u16 d, u16 fill, u8 s)
-{ return shld_word_asm(&M.x86.R_EFLG,d,fill,s); }
-
-u32 shld_long (u32 d, u32 fill, u8 s)
-{ return shld_long_asm(&M.x86.R_EFLG,d,fill,s); }
-
-u16 shrd_word (u16 d, u16 fill, u8 s)
-{ return shrd_word_asm(&M.x86.R_EFLG,d,fill,s); }
-
-u32 shrd_long (u32 d, u32 fill, u8 s)
-{ return shrd_long_asm(&M.x86.R_EFLG,d,fill,s); }
-
-u8 sbb_byte (u8 d, u8 s)
-{ return sbb_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 sbb_word (u16 d, u16 s)
-{ return sbb_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 sbb_long (u32 d, u32 s)
-{ return sbb_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 sub_byte (u8 d, u8 s)
-{ return sub_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 sub_word (u16 d, u16 s)
-{ return sub_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 sub_long (u32 d, u32 s)
-{ return sub_long_asm(&M.x86.R_EFLG,d,s); }
-
-void test_byte (u8 d, u8 s)
-{ test_byte_asm(&M.x86.R_EFLG,d,s); }
-
-void test_word (u16 d, u16 s)
-{ test_word_asm(&M.x86.R_EFLG,d,s); }
-
-void test_long (u32 d, u32 s)
-{ test_long_asm(&M.x86.R_EFLG,d,s); }
-
-u8 xor_byte (u8 d, u8 s)
-{ return xor_byte_asm(&M.x86.R_EFLG,d,s); }
-
-u16 xor_word (u16 d, u16 s)
-{ return xor_word_asm(&M.x86.R_EFLG,d,s); }
-
-u32 xor_long (u32 d, u32 s)
-{ return xor_long_asm(&M.x86.R_EFLG,d,s); }
-
-void imul_byte (u8 s)
-{ imul_byte_asm(&M.x86.R_EFLG,&M.x86.R_AX,M.x86.R_AL,s); }
-
-void imul_word (u16 s)
-{ imul_word_asm(&M.x86.R_EFLG,&M.x86.R_AX,&M.x86.R_DX,M.x86.R_AX,s); }
-
-void imul_long (u32 s)
-{ imul_long_asm(&M.x86.R_EFLG,&M.x86.R_EAX,&M.x86.R_EDX,M.x86.R_EAX,s); }
-
-void imul_long_direct(u32 *res_lo, u32* res_hi,u32 d, u32 s)
-{ imul_long_asm(&M.x86.R_EFLG,res_lo,res_hi,d,s); }
-
-void mul_byte (u8 s)
-{ mul_byte_asm(&M.x86.R_EFLG,&M.x86.R_AX,M.x86.R_AL,s); }
-
-void mul_word (u16 s)
-{ mul_word_asm(&M.x86.R_EFLG,&M.x86.R_AX,&M.x86.R_DX,M.x86.R_AX,s); }
-
-void mul_long (u32 s)
-{ mul_long_asm(&M.x86.R_EFLG,&M.x86.R_EAX,&M.x86.R_EDX,M.x86.R_EAX,s); }
-
-void idiv_byte (u8 s)
-{ idiv_byte_asm(&M.x86.R_EFLG,&M.x86.R_AL,&M.x86.R_AH,M.x86.R_AX,s); }
-
-void idiv_word (u16 s)
-{ idiv_word_asm(&M.x86.R_EFLG,&M.x86.R_AX,&M.x86.R_DX,M.x86.R_AX,M.x86.R_DX,s); }
-
-void idiv_long (u32 s)
-{ idiv_long_asm(&M.x86.R_EFLG,&M.x86.R_EAX,&M.x86.R_EDX,M.x86.R_EAX,M.x86.R_EDX,s); }
-
-void div_byte (u8 s)
-{ div_byte_asm(&M.x86.R_EFLG,&M.x86.R_AL,&M.x86.R_AH,M.x86.R_AX,s); }
-
-void div_word (u16 s)
-{ div_word_asm(&M.x86.R_EFLG,&M.x86.R_AX,&M.x86.R_DX,M.x86.R_AX,M.x86.R_DX,s); }
-
-void div_long (u32 s)
-{ div_long_asm(&M.x86.R_EFLG,&M.x86.R_EAX,&M.x86.R_EDX,M.x86.R_EAX,M.x86.R_EDX,s); }
-
-#endif
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/sys.c b/board/MAI/bios_emulator/scitech/src/x86emu/sys.c
deleted file mode 100644
index afe58f8647..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/sys.c
+++ /dev/null
@@ -1,658 +0,0 @@
-/****************************************************************************
-*
-* Realmode X86 Emulator Library
-*
-* Copyright (C) 1996-1999 SciTech Software, Inc.
-* Copyright (C) David Mosberger-Tang
-* Copyright (C) 1999 Egbert Eich
-*
-* ========================================================================
-*
-* Permission to use, copy, modify, distribute, and sell this software and
-* its documentation for any purpose is hereby granted without fee,
-* provided that the above copyright notice appear in all copies and that
-* both that copyright notice and this permission notice appear in
-* supporting documentation, and that the name of the authors not be used
-* in advertising or publicity pertaining to distribution of the software
-* without specific, written prior permission. The authors makes no
-* representations about the suitability of this software for any purpose.
-* It is provided "as is" without express or implied warranty.
-*
-* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-* Developer: Kendall Bennett
-*
-* Description: This file includes subroutines which are related to
-* programmed I/O and memory access. Included in this module
-* are default functions with limited usefulness. For real
-* uses these functions will most likely be overriden by the
-* user library.
-*
-****************************************************************************/
-
-#include "x86emu.h"
-#include "x86emu/regs.h"
-#include "x86emu/debug.h"
-#include "x86emu/prim_ops.h"
-#include <string.h>
-
-/*------------------------- Global Variables ------------------------------*/
-
-X86EMU_sysEnv _X86EMU_env; /* Global emulator machine state */
-X86EMU_intrFuncs _X86EMU_intrTab[256];
-
-/*----------------------------- Implementation ----------------------------*/
-#ifdef __alpha__
-/* to cope with broken egcs-1.1.2 :-(((( */
-
-/*
- * inline functions to do unaligned accesses
- * from linux/include/asm-alpha/unaligned.h
- */
-
-/*
- * EGCS 1.1 knows about arbitrary unaligned loads. Define some
- * packed structures to talk about such things with.
- */
-
-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 91
-struct __una_u64 { unsigned long x __attribute__((packed)); };
-struct __una_u32 { unsigned int x __attribute__((packed)); };
-struct __una_u16 { unsigned short x __attribute__((packed)); };
-#endif
-
-static __inline__ unsigned long ldq_u(unsigned long * r11)
-{
-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 91
- const struct __una_u64 *ptr = (const struct __una_u64 *) r11;
- return ptr->x;
-#else
- unsigned long r1,r2;
- __asm__("ldq_u %0,%3\n\t"
- "ldq_u %1,%4\n\t"
- "extql %0,%2,%0\n\t"
- "extqh %1,%2,%1"
- :"=&r" (r1), "=&r" (r2)
- :"r" (r11),
- "m" (*r11),
- "m" (*(const unsigned long *)(7+(char *) r11)));
- return r1 | r2;
-#endif
-}
-
-static __inline__ unsigned long ldl_u(unsigned int * r11)
-{
-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 91
- const struct __una_u32 *ptr = (const struct __una_u32 *) r11;
- return ptr->x;
-#else
- unsigned long r1,r2;
- __asm__("ldq_u %0,%3\n\t"
- "ldq_u %1,%4\n\t"
- "extll %0,%2,%0\n\t"
- "extlh %1,%2,%1"
- :"=&r" (r1), "=&r" (r2)
- :"r" (r11),
- "m" (*r11),
- "m" (*(const unsigned long *)(3+(char *) r11)));
- return r1 | r2;
-#endif
-}
-
-static __inline__ unsigned long ldw_u(unsigned short * r11)
-{
-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 91
- const struct __una_u16 *ptr = (const struct __una_u16 *) r11;
- return ptr->x;
-#else
- unsigned long r1,r2;
- __asm__("ldq_u %0,%3\n\t"
- "ldq_u %1,%4\n\t"
- "extwl %0,%2,%0\n\t"
- "extwh %1,%2,%1"
- :"=&r" (r1), "=&r" (r2)
- :"r" (r11),
- "m" (*r11),
- "m" (*(const unsigned long *)(1+(char *) r11)));
- return r1 | r2;
-#endif
-}
-
-/*
- * Elemental unaligned stores
- */
-
-static __inline__ void stq_u(unsigned long r5, unsigned long * r11)
-{
-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 91
- struct __una_u64 *ptr = (struct __una_u64 *) r11;
- ptr->x = r5;
-#else
- unsigned long r1,r2,r3,r4;
-
- __asm__("ldq_u %3,%1\n\t"
- "ldq_u %2,%0\n\t"
- "insqh %6,%7,%5\n\t"
- "insql %6,%7,%4\n\t"
- "mskqh %3,%7,%3\n\t"
- "mskql %2,%7,%2\n\t"
- "bis %3,%5,%3\n\t"
- "bis %2,%4,%2\n\t"
- "stq_u %3,%1\n\t"
- "stq_u %2,%0"
- :"=m" (*r11),
- "=m" (*(unsigned long *)(7+(char *) r11)),
- "=&r" (r1), "=&r" (r2), "=&r" (r3), "=&r" (r4)
- :"r" (r5), "r" (r11));
-#endif
-}
-
-static __inline__ void stl_u(unsigned long r5, unsigned int * r11)
-{
-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 91
- struct __una_u32 *ptr = (struct __una_u32 *) r11;
- ptr->x = r5;
-#else
- unsigned long r1,r2,r3,r4;
-
- __asm__("ldq_u %3,%1\n\t"
- "ldq_u %2,%0\n\t"
- "inslh %6,%7,%5\n\t"
- "insll %6,%7,%4\n\t"
- "msklh %3,%7,%3\n\t"
- "mskll %2,%7,%2\n\t"
- "bis %3,%5,%3\n\t"
- "bis %2,%4,%2\n\t"
- "stq_u %3,%1\n\t"
- "stq_u %2,%0"
- :"=m" (*r11),
- "=m" (*(unsigned long *)(3+(char *) r11)),
- "=&r" (r1), "=&r" (r2), "=&r" (r3), "=&r" (r4)
- :"r" (r5), "r" (r11));
-#endif
-}
-
-static __inline__ void stw_u(unsigned long r5, unsigned short * r11)
-{
-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 91
- struct __una_u16 *ptr = (struct __una_u16 *) r11;
- ptr->x = r5;
-#else
- unsigned long r1,r2,r3,r4;
-
- __asm__("ldq_u %3,%1\n\t"
- "ldq_u %2,%0\n\t"
- "inswh %6,%7,%5\n\t"
- "inswl %6,%7,%4\n\t"
- "mskwh %3,%7,%3\n\t"
- "mskwl %2,%7,%2\n\t"
- "bis %3,%5,%3\n\t"
- "bis %2,%4,%2\n\t"
- "stq_u %3,%1\n\t"
- "stq_u %2,%0"
- :"=m" (*r11),
- "=m" (*(unsigned long *)(1+(char *) r11)),
- "=&r" (r1), "=&r" (r2), "=&r" (r3), "=&r" (r4)
- :"r" (r5), "r" (r11));
-#endif
-}
-
-#elif defined (__ia64__)
-/*
- * EGCS 1.1 knows about arbitrary unaligned loads. Define some
- * packed structures to talk about such things with.
- */
-struct __una_u64 { unsigned long x __attribute__((packed)); };
-struct __una_u32 { unsigned int x __attribute__((packed)); };
-struct __una_u16 { unsigned short x __attribute__((packed)); };
-
-static __inline__ unsigned long
-__uldq (const unsigned long * r11)
-{
- const struct __una_u64 *ptr = (const struct __una_u64 *) r11;
- return ptr->x;
-}
-
-static __inline__ unsigned long
-uldl (const unsigned int * r11)
-{
- const struct __una_u32 *ptr = (const struct __una_u32 *) r11;
- return ptr->x;
-}
-
-static __inline__ unsigned long
-uldw (const unsigned short * r11)
-{
- const struct __una_u16 *ptr = (const struct __una_u16 *) r11;
- return ptr->x;
-}
-
-static __inline__ void
-ustq (unsigned long r5, unsigned long * r11)
-{
- struct __una_u64 *ptr = (struct __una_u64 *) r11;
- ptr->x = r5;
-}
-
-static __inline__ void
-ustl (unsigned long r5, unsigned int * r11)
-{
- struct __una_u32 *ptr = (struct __una_u32 *) r11;
- ptr->x = r5;
-}
-
-static __inline__ void
-ustw (unsigned long r5, unsigned short * r11)
-{
- struct __una_u16 *ptr = (struct __una_u16 *) r11;
- ptr->x = r5;
-}
-
-#endif
-
-/****************************************************************************
-PARAMETERS:
-addr - Emulator memory address to read
-
-RETURNS:
-Byte value read from emulator memory.
-
-REMARKS:
-Reads a byte value from the emulator memory.
-****************************************************************************/
-u8 X86API rdb(
- u32 addr)
-{
- u8 val;
-
- if (addr > M.mem_size - 1) {
- DB(printk("mem_read: address %#lx out of range!\n", addr);)
- HALT_SYS();
- }
- val = *(u8*)(M.mem_base + addr);
-DB( if (DEBUG_MEM_TRACE())
- printk("%#08x 1 -> %#x\n", addr, val);)
- return val;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr - Emulator memory address to read
-
-RETURNS:
-Word value read from emulator memory.
-
-REMARKS:
-Reads a word value from the emulator memory.
-****************************************************************************/
-u16 X86API rdw(
- u32 addr)
-{
- u16 val = 0;
-
- if (addr > M.mem_size - 2) {
- DB(printk("mem_read: address %#lx out of range!\n", addr);)
- HALT_SYS();
- }
-#ifdef __BIG_ENDIAN__
- if (addr & 0x1) {
- val = (*(u8*)(M.mem_base + addr) |
- (*(u8*)(M.mem_base + addr + 1) << 8));
- }
- else
-#endif
-#ifdef __alpha__
- val = ldw_u((u16*)(M.mem_base + addr));
-#elif defined (__ia64__)
- val = uldw((u16*)(M.mem_base + addr));
-#else
- val = *(u16*)(M.mem_base + addr);
-#endif
- DB( if (DEBUG_MEM_TRACE())
- printk("%#08x 2 -> %#x\n", addr, val);)
- return val;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr - Emulator memory address to read
-
-RETURNS:
-Long value read from emulator memory.
-REMARKS:
-Reads a long value from the emulator memory.
-****************************************************************************/
-u32 X86API rdl(
- u32 addr)
-{
- u32 val = 0;
-
- if (addr > M.mem_size - 4) {
- DB(printk("mem_read: address %#lx out of range!\n", addr);)
- HALT_SYS();
- }
-#ifdef __BIG_ENDIAN__
- if (addr & 0x3) {
- val = (*(u8*)(M.mem_base + addr + 0) |
- (*(u8*)(M.mem_base + addr + 1) << 8) |
- (*(u8*)(M.mem_base + addr + 2) << 16) |
- (*(u8*)(M.mem_base + addr + 3) << 24));
- }
- else
-#endif
-#ifdef __alpha__
- val = ldl_u((u32*)(M.mem_base + addr));
-#elif defined (__ia64__)
- val = uldl((u32*)(M.mem_base + addr));
-#else
- val = *(u32*)(M.mem_base + addr);
-#endif
-DB( if (DEBUG_MEM_TRACE())
- printk("%#08x 4 -> %#x\n", addr, val);)
- return val;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr - Emulator memory address to read
-val - Value to store
-
-REMARKS:
-Writes a byte value to emulator memory.
-****************************************************************************/
-void X86API wrb(
- u32 addr,
- u8 val)
-{
-DB( if (DEBUG_MEM_TRACE())
- printk("%#08x 1 <- %#x\n", addr, val);)
- if (addr > M.mem_size - 1) {
- DB(printk("mem_write: address %#lx out of range!\n", addr);)
- HALT_SYS();
- }
- *(u8*)(M.mem_base + addr) = val;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr - Emulator memory address to read
-val - Value to store
-
-REMARKS:
-Writes a word value to emulator memory.
-****************************************************************************/
-void X86API wrw(
- u32 addr,
- u16 val)
-{
-DB( if (DEBUG_MEM_TRACE())
- printk("%#08x 2 <- %#x\n", addr, val);)
- if (addr > M.mem_size - 2) {
- DB(printk("mem_write: address %#lx out of range!\n", addr);)
- HALT_SYS();
- }
-#ifdef __BIG_ENDIAN__
- if (addr & 0x1) {
- *(u8*)(M.mem_base + addr + 0) = (val >> 0) & 0xff;
- *(u8*)(M.mem_base + addr + 1) = (val >> 8) & 0xff;
- }
- else
-#endif
-#ifdef __alpha__
- stw_u(val,(u16*)(M.mem_base + addr));
-#elif defined (__ia64__)
- ustw(val,(u16*)(M.mem_base + addr));
-#else
- *(u16*)(M.mem_base + addr) = val;
-#endif
-}
-
-/****************************************************************************
-PARAMETERS:
-addr - Emulator memory address to read
-val - Value to store
-
-REMARKS:
-Writes a long value to emulator memory.
-****************************************************************************/
-void X86API wrl(
- u32 addr,
- u32 val)
-{
-DB( if (DEBUG_MEM_TRACE())
- printk("%#08x 4 <- %#x\n", addr, val);)
- if (addr > M.mem_size - 4) {
- DB(printk("mem_write: address %#lx out of range!\n", addr);)
- HALT_SYS();
- }
-#ifdef __BIG_ENDIAN__
- if (addr & 0x1) {
- *(u8*)(M.mem_base + addr + 0) = (val >> 0) & 0xff;
- *(u8*)(M.mem_base + addr + 1) = (val >> 8) & 0xff;
- *(u8*)(M.mem_base + addr + 2) = (val >> 16) & 0xff;
- *(u8*)(M.mem_base + addr + 3) = (val >> 24) & 0xff;
- }
- else
-#endif
-#ifdef __alpha__
- stl_u(val,(u32*)(M.mem_base + addr));
-#elif defined (__ia64__)
- ustl(val,(u32*)(M.mem_base + addr));
-#else
- *(u32*)(M.mem_base + addr) = val;
-#endif
-}
-
-/****************************************************************************
-PARAMETERS:
-addr - PIO address to read
-RETURN:
-0
-REMARKS:
-Default PIO byte read function. Doesn't perform real inb.
-****************************************************************************/
-static u8 X86API p_inb(
- X86EMU_pioAddr addr)
-{
-DB( if (DEBUG_IO_TRACE())
- printk("inb %#04x \n", addr);)
- return 0;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr - PIO address to read
-RETURN:
-0
-REMARKS:
-Default PIO word read function. Doesn't perform real inw.
-****************************************************************************/
-static u16 X86API p_inw(
- X86EMU_pioAddr addr)
-{
-DB( if (DEBUG_IO_TRACE())
- printk("inw %#04x \n", addr);)
- return 0;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr - PIO address to read
-RETURN:
-0
-REMARKS:
-Default PIO long read function. Doesn't perform real inl.
-****************************************************************************/
-static u32 X86API p_inl(
- X86EMU_pioAddr addr)
-{
-DB( if (DEBUG_IO_TRACE())
- printk("inl %#04x \n", addr);)
- return 0;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr - PIO address to write
-val - Value to store
-REMARKS:
-Default PIO byte write function. Doesn't perform real outb.
-****************************************************************************/
-static void X86API p_outb(
- X86EMU_pioAddr addr,
- u8 val)
-{
-DB( if (DEBUG_IO_TRACE())
- printk("outb %#02x -> %#04x \n", val, addr);)
- return;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr - PIO address to write
-val - Value to store
-REMARKS:
-Default PIO word write function. Doesn't perform real outw.
-****************************************************************************/
-static void X86API p_outw(
- X86EMU_pioAddr addr,
- u16 val)
-{
-DB( if (DEBUG_IO_TRACE())
- printk("outw %#04x -> %#04x \n", val, addr);)
- return;
-}
-
-/****************************************************************************
-PARAMETERS:
-addr - PIO address to write
-val - Value to store
-REMARKS:
-Default PIO ;ong write function. Doesn't perform real outl.
-****************************************************************************/
-static void X86API p_outl(
- X86EMU_pioAddr addr,
- u32 val)
-{
-DB( if (DEBUG_IO_TRACE())
- printk("outl %#08x -> %#04x \n", val, addr);)
- return;
-}
-
-/*------------------------- Global Variables ------------------------------*/
-
-u8 (X86APIP sys_rdb)(u32 addr) = rdb;
-u16 (X86APIP sys_rdw)(u32 addr) = rdw;
-u32 (X86APIP sys_rdl)(u32 addr) = rdl;
-void (X86APIP sys_wrb)(u32 addr,u8 val) = wrb;
-void (X86APIP sys_wrw)(u32 addr,u16 val) = wrw;
-void (X86APIP sys_wrl)(u32 addr,u32 val) = wrl;
-u8 (X86APIP sys_inb)(X86EMU_pioAddr addr) = p_inb;
-u16 (X86APIP sys_inw)(X86EMU_pioAddr addr) = p_inw;
-u32 (X86APIP sys_inl)(X86EMU_pioAddr addr) = p_inl;
-void (X86APIP sys_outb)(X86EMU_pioAddr addr, u8 val) = p_outb;
-void (X86APIP sys_outw)(X86EMU_pioAddr addr, u16 val) = p_outw;
-void (X86APIP sys_outl)(X86EMU_pioAddr addr, u32 val) = p_outl;
-
-/*----------------------------- Setup -------------------------------------*/
-
-/****************************************************************************
-PARAMETERS:
-funcs - New memory function pointers to make active
-
-REMARKS:
-This function is used to set the pointers to functions which access
-memory space, allowing the user application to override these functions
-and hook them out as necessary for their application.
-****************************************************************************/
-void X86EMU_setupMemFuncs(
- X86EMU_memFuncs *funcs)
-{
- sys_rdb = funcs->rdb;
- sys_rdw = funcs->rdw;
- sys_rdl = funcs->rdl;
- sys_wrb = funcs->wrb;
- sys_wrw = funcs->wrw;
- sys_wrl = funcs->wrl;
-}
-
-/****************************************************************************
-PARAMETERS:
-funcs - New programmed I/O function pointers to make active
-
-REMARKS:
-This function is used to set the pointers to functions which access
-I/O space, allowing the user application to override these functions
-and hook them out as necessary for their application.
-****************************************************************************/
-void X86EMU_setupPioFuncs(
- X86EMU_pioFuncs *funcs)
-{
- sys_inb = funcs->inb;
- sys_inw = funcs->inw;
- sys_inl = funcs->inl;
- sys_outb = funcs->outb;
- sys_outw = funcs->outw;
- sys_outl = funcs->outl;
-}
-
-/****************************************************************************
-PARAMETERS:
-funcs - New interrupt vector table to make active
-
-REMARKS:
-This function is used to set the pointers to functions which handle
-interrupt processing in the emulator, allowing the user application to
-hook interrupts as necessary for their application. Any interrupts that
-are not hooked by the user application, and reflected and handled internally
-in the emulator via the interrupt vector table. This allows the application
-to get control when the code being emulated executes specific software
-interrupts.
-****************************************************************************/
-void X86EMU_setupIntrFuncs(
- X86EMU_intrFuncs funcs[])
-{
- int i;
-
- for (i=0; i < 256; i++)
- _X86EMU_intrTab[i] = NULL;
- if (funcs) {
- for (i = 0; i < 256; i++)
- _X86EMU_intrTab[i] = funcs[i];
- }
-}
-
-/****************************************************************************
-PARAMETERS:
-int - New software interrupt to prepare for
-
-REMARKS:
-This function is used to set up the emulator state to exceute a software
-interrupt. This can be used by the user application code to allow an
-interrupt to be hooked, examined and then reflected back to the emulator
-so that the code in the emulator will continue processing the software
-interrupt as per normal. This essentially allows system code to actively
-hook and handle certain software interrupts as necessary.
-****************************************************************************/
-void X86EMU_prepareForInt(
- int num)
-{
- push_word((u16)M.x86.R_FLG);
- CLEAR_FLAG(F_IF);
- CLEAR_FLAG(F_TF);
- push_word(M.x86.R_CS);
- M.x86.R_CS = mem_access_word(num * 4 + 2);
- push_word(M.x86.R_IP);
- M.x86.R_IP = mem_access_word(num * 4);
- M.x86.intr = 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/validate.c b/board/MAI/bios_emulator/scitech/src/x86emu/validate.c
deleted file mode 100644
index c951301f96..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/validate.c
+++ /dev/null
@@ -1,765 +0,0 @@
-/****************************************************************************
-*
-* Realmode X86 Emulator Library
-*
-* Copyright (C) 1996-1999 SciTech Software, Inc.
-* Copyright (C) David Mosberger-Tang
-* Copyright (C) 1999 Egbert Eich
-*
-* ========================================================================
-*
-* Permission to use, copy, modify, distribute, and sell this software and
-* its documentation for any purpose is hereby granted without fee,
-* provided that the above copyright notice appear in all copies and that
-* both that copyright notice and this permission notice appear in
-* supporting documentation, and that the name of the authors not be used
-* in advertising or publicity pertaining to distribution of the software
-* without specific, written prior permission. The authors makes no
-* representations about the suitability of this software for any purpose.
-* It is provided "as is" without express or implied warranty.
-*
-* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* ========================================================================
-*
-* Language: Watcom C 10.6 or later
-* Environment: 32-bit DOS
-* Developer: Kendall Bennett
-*
-* Description: Program to validate the x86 emulator library for
-* correctness. We run the emulator primitive operations
-* functions against the real x86 CPU, and compare the result
-* and flags to ensure correctness.
-*
-* We use inline assembler to compile and build this program.
-*
-****************************************************************************/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <stdarg.h>
-#include "x86emu.h"
-#include "x86emu/prim_asm.h"
-
-/*-------------------------- Implementation -------------------------------*/
-
-#define true 1
-#define false 0
-
-#define ALL_FLAGS (F_CF | F_PF | F_AF | F_ZF | F_SF | F_OF)
-
-#define VAL_START_BINARY(parm_type,res_type,dmax,smax,dincr,sincr) \
-{ \
- parm_type d,s; \
- res_type r,r_asm; \
- ulong flags,inflags; \
- int f,failed = false; \
- char buf1[80],buf2[80]; \
- for (d = 0; d < dmax; d += dincr) { \
- for (s = 0; s < smax; s += sincr) { \
- M.x86.R_EFLG = inflags = flags = def_flags; \
- for (f = 0; f < 2; f++) {
-
-#define VAL_TEST_BINARY(name) \
- r_asm = name##_asm(&flags,d,s); \
- r = name(d,s); \
- if (r != r_asm || M.x86.R_EFLG != flags) \
- failed = true; \
- if (failed || trace) {
-
-#define VAL_TEST_BINARY_VOID(name) \
- name##_asm(&flags,d,s); \
- name(d,s); \
- r = r_asm = 0; \
- if (M.x86.R_EFLG != flags) \
- failed = true; \
- if (failed || trace) {
-
-#define VAL_FAIL_BYTE_BYTE_BINARY(name) \
- if (failed) \
- printk("fail\n"); \
- printk("0x%02X = %-15s(0x%02X,0x%02X), flags = %s -> %s\n", \
- r, #name, d, s, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG)); \
- printk("0x%02X = %-15s(0x%02X,0x%02X), flags = %s -> %s\n", \
- r_asm, #name"_asm", d, s, print_flags(buf1,inflags), print_flags(buf2,flags));
-
-#define VAL_FAIL_WORD_WORD_BINARY(name) \
- if (failed) \
- printk("fail\n"); \
- printk("0x%04X = %-15s(0x%04X,0x%04X), flags = %s -> %s\n", \
- r, #name, d, s, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG)); \
- printk("0x%04X = %-15s(0x%04X,0x%04X), flags = %s -> %s\n", \
- r_asm, #name"_asm", d, s, print_flags(buf1,inflags), print_flags(buf2,flags));
-
-#define VAL_FAIL_LONG_LONG_BINARY(name) \
- if (failed) \
- printk("fail\n"); \
- printk("0x%08X = %-15s(0x%08X,0x%08X), flags = %s -> %s\n", \
- r, #name, d, s, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG)); \
- printk("0x%08X = %-15s(0x%08X,0x%08X), flags = %s -> %s\n", \
- r_asm, #name"_asm", d, s, print_flags(buf1,inflags), print_flags(buf2,flags));
-
-#define VAL_END_BINARY() \
- } \
- M.x86.R_EFLG = inflags = flags = def_flags | (ALL_FLAGS & ~F_OF); \
- if (failed) \
- break; \
- } \
- if (failed) \
- break; \
- } \
- if (failed) \
- break; \
- } \
- if (!failed) \
- printk("passed\n"); \
-}
-
-#define VAL_BYTE_BYTE_BINARY(name) \
- printk("Validating %s ... ", #name); \
- VAL_START_BINARY(u8,u8,0xFF,0xFF,1,1) \
- VAL_TEST_BINARY(name) \
- VAL_FAIL_BYTE_BYTE_BINARY(name) \
- VAL_END_BINARY()
-
-#define VAL_WORD_WORD_BINARY(name) \
- printk("Validating %s ... ", #name); \
- VAL_START_BINARY(u16,u16,0xFF00,0xFF00,0x100,0x100) \
- VAL_TEST_BINARY(name) \
- VAL_FAIL_WORD_WORD_BINARY(name) \
- VAL_END_BINARY()
-
-#define VAL_LONG_LONG_BINARY(name) \
- printk("Validating %s ... ", #name); \
- VAL_START_BINARY(u32,u32,0xFF000000,0xFF000000,0x1000000,0x1000000) \
- VAL_TEST_BINARY(name) \
- VAL_FAIL_LONG_LONG_BINARY(name) \
- VAL_END_BINARY()
-
-#define VAL_VOID_BYTE_BINARY(name) \
- printk("Validating %s ... ", #name); \
- VAL_START_BINARY(u8,u8,0xFF,0xFF,1,1) \
- VAL_TEST_BINARY_VOID(name) \
- VAL_FAIL_BYTE_BYTE_BINARY(name) \
- VAL_END_BINARY()
-
-#define VAL_VOID_WORD_BINARY(name) \
- printk("Validating %s ... ", #name); \
- VAL_START_BINARY(u16,u16,0xFF00,0xFF00,0x100,0x100) \
- VAL_TEST_BINARY_VOID(name) \
- VAL_FAIL_WORD_WORD_BINARY(name) \
- VAL_END_BINARY()
-
-#define VAL_VOID_LONG_BINARY(name) \
- printk("Validating %s ... ", #name); \
- VAL_START_BINARY(u32,u32,0xFF000000,0xFF000000,0x1000000,0x1000000) \
- VAL_TEST_BINARY_VOID(name) \
- VAL_FAIL_LONG_LONG_BINARY(name) \
- VAL_END_BINARY()
-
-#define VAL_BYTE_ROTATE(name) \
- printk("Validating %s ... ", #name); \
- VAL_START_BINARY(u8,u8,0xFF,8,1,1) \
- VAL_TEST_BINARY(name) \
- VAL_FAIL_BYTE_BYTE_BINARY(name) \
- VAL_END_BINARY()
-
-#define VAL_WORD_ROTATE(name) \
- printk("Validating %s ... ", #name); \
- VAL_START_BINARY(u16,u16,0xFF00,16,0x100,1) \
- VAL_TEST_BINARY(name) \
- VAL_FAIL_WORD_WORD_BINARY(name) \
- VAL_END_BINARY()
-
-#define VAL_LONG_ROTATE(name) \
- printk("Validating %s ... ", #name); \
- VAL_START_BINARY(u32,u32,0xFF000000,32,0x1000000,1) \
- VAL_TEST_BINARY(name) \
- VAL_FAIL_LONG_LONG_BINARY(name) \
- VAL_END_BINARY()
-
-#define VAL_START_TERNARY(parm_type,res_type,dmax,smax,dincr,sincr,maxshift)\
-{ \
- parm_type d,s; \
- res_type r,r_asm; \
- u8 shift; \
- u32 flags,inflags; \
- int f,failed = false; \
- char buf1[80],buf2[80]; \
- for (d = 0; d < dmax; d += dincr) { \
- for (s = 0; s < smax; s += sincr) { \
- for (shift = 0; shift < maxshift; shift += 1) { \
- M.x86.R_EFLG = inflags = flags = def_flags; \
- for (f = 0; f < 2; f++) {
-
-#define VAL_TEST_TERNARY(name) \
- r_asm = name##_asm(&flags,d,s,shift); \
- r = name(d,s,shift); \
- if (r != r_asm || M.x86.R_EFLG != flags) \
- failed = true; \
- if (failed || trace) {
-
-#define VAL_FAIL_WORD_WORD_TERNARY(name) \
- if (failed) \
- printk("fail\n"); \
- printk("0x%04X = %-15s(0x%04X,0x%04X,%d), flags = %s -> %s\n", \
- r, #name, d, s, shift, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG)); \
- printk("0x%04X = %-15s(0x%04X,0x%04X,%d), flags = %s -> %s\n", \
- r_asm, #name"_asm", d, s, shift, print_flags(buf1,inflags), print_flags(buf2,flags));
-
-#define VAL_FAIL_LONG_LONG_TERNARY(name) \
- if (failed) \
- printk("fail\n"); \
- printk("0x%08X = %-15s(0x%08X,0x%08X,%d), flags = %s -> %s\n", \
- r, #name, d, s, shift, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG)); \
- printk("0x%08X = %-15s(0x%08X,0x%08X,%d), flags = %s -> %s\n", \
- r_asm, #name"_asm", d, s, shift, print_flags(buf1,inflags), print_flags(buf2,flags));
-
-#define VAL_END_TERNARY() \
- } \
- M.x86.R_EFLG = inflags = flags = def_flags | (ALL_FLAGS & ~F_OF); \
- if (failed) \
- break; \
- } \
- if (failed) \
- break; \
- } \
- if (failed) \
- break; \
- } \
- if (failed) \
- break; \
- } \
- if (!failed) \
- printk("passed\n"); \
-}
-
-#define VAL_WORD_ROTATE_DBL(name) \
- printk("Validating %s ... ", #name); \
- VAL_START_TERNARY(u16,u16,0xFF00,0xFF00,0x100,0x100,16) \
- VAL_TEST_TERNARY(name) \
- VAL_FAIL_WORD_WORD_TERNARY(name) \
- VAL_END_TERNARY()
-
-#define VAL_LONG_ROTATE_DBL(name) \
- printk("Validating %s ... ", #name); \
- VAL_START_TERNARY(u32,u32,0xFF000000,0xFF000000,0x1000000,0x1000000,32) \
- VAL_TEST_TERNARY(name) \
- VAL_FAIL_LONG_LONG_TERNARY(name) \
- VAL_END_TERNARY()
-
-#define VAL_START_UNARY(parm_type,max,incr) \
-{ \
- parm_type d,r,r_asm; \
- u32 flags,inflags; \
- int f,failed = false; \
- char buf1[80],buf2[80]; \
- for (d = 0; d < max; d += incr) { \
- M.x86.R_EFLG = inflags = flags = def_flags; \
- for (f = 0; f < 2; f++) {
-
-#define VAL_TEST_UNARY(name) \
- r_asm = name##_asm(&flags,d); \
- r = name(d); \
- if (r != r_asm || M.x86.R_EFLG != flags) { \
- failed = true;
-
-#define VAL_FAIL_BYTE_UNARY(name) \
- printk("fail\n"); \
- printk("0x%02X = %-15s(0x%02X), flags = %s -> %s\n", \
- r, #name, d, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG)); \
- printk("0x%02X = %-15s(0x%02X), flags = %s -> %s\n", \
- r_asm, #name"_asm", d, print_flags(buf1,inflags), print_flags(buf2,flags));
-
-#define VAL_FAIL_WORD_UNARY(name) \
- printk("fail\n"); \
- printk("0x%04X = %-15s(0x%04X), flags = %s -> %s\n", \
- r, #name, d, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG)); \
- printk("0x%04X = %-15s(0x%04X), flags = %s -> %s\n", \
- r_asm, #name"_asm", d, print_flags(buf1,inflags), print_flags(buf2,flags));
-
-#define VAL_FAIL_LONG_UNARY(name) \
- printk("fail\n"); \
- printk("0x%08X = %-15s(0x%08X), flags = %s -> %s\n", \
- r, #name, d, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG)); \
- printk("0x%08X = %-15s(0x%08X), flags = %s -> %s\n", \
- r_asm, #name"_asm", d, print_flags(buf1,inflags), print_flags(buf2,flags));
-
-#define VAL_END_UNARY() \
- } \
- M.x86.R_EFLG = inflags = flags = def_flags | ALL_FLAGS; \
- if (failed) \
- break; \
- } \
- if (failed) \
- break; \
- } \
- if (!failed) \
- printk("passed\n"); \
-}
-
-#define VAL_BYTE_UNARY(name) \
- printk("Validating %s ... ", #name); \
- VAL_START_UNARY(u8,0xFF,0x1) \
- VAL_TEST_UNARY(name) \
- VAL_FAIL_BYTE_UNARY(name) \
- VAL_END_UNARY()
-
-#define VAL_WORD_UNARY(name) \
- printk("Validating %s ... ", #name); \
- VAL_START_UNARY(u16,0xFF00,0x100) \
- VAL_TEST_UNARY(name) \
- VAL_FAIL_WORD_UNARY(name) \
- VAL_END_UNARY()
-
-#define VAL_WORD_BYTE_UNARY(name) \
- printk("Validating %s ... ", #name); \
- VAL_START_UNARY(u16,0xFF,0x1) \
- VAL_TEST_UNARY(name) \
- VAL_FAIL_WORD_UNARY(name) \
- VAL_END_UNARY()
-
-#define VAL_LONG_UNARY(name) \
- printk("Validating %s ... ", #name); \
- VAL_START_UNARY(u32,0xFF000000,0x1000000) \
- VAL_TEST_UNARY(name) \
- VAL_FAIL_LONG_UNARY(name) \
- VAL_END_UNARY()
-
-#define VAL_BYTE_MUL(name) \
- printk("Validating %s ... ", #name); \
-{ \
- u8 d,s; \
- u16 r,r_asm; \
- u32 flags,inflags; \
- int f,failed = false; \
- char buf1[80],buf2[80]; \
- for (d = 0; d < 0xFF; d += 1) { \
- for (s = 0; s < 0xFF; s += 1) { \
- M.x86.R_EFLG = inflags = flags = def_flags; \
- for (f = 0; f < 2; f++) { \
- name##_asm(&flags,&r_asm,d,s); \
- M.x86.R_AL = d; \
- name(s); \
- r = M.x86.R_AX; \
- if (r != r_asm || M.x86.R_EFLG != flags) \
- failed = true; \
- if (failed || trace) { \
- if (failed) \
- printk("fail\n"); \
- printk("0x%04X = %-15s(0x%02X,0x%02X), flags = %s -> %s\n", \
- r, #name, d, s, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG)); \
- printk("0x%04X = %-15s(0x%02X,0x%02X), flags = %s -> %s\n", \
- r_asm, #name"_asm", d, s, print_flags(buf1,inflags), print_flags(buf2,flags)); \
- } \
- M.x86.R_EFLG = inflags = flags = def_flags | (ALL_FLAGS & ~F_OF); \
- if (failed) \
- break; \
- } \
- if (failed) \
- break; \
- } \
- if (failed) \
- break; \
- } \
- if (!failed) \
- printk("passed\n"); \
-}
-
-#define VAL_WORD_MUL(name) \
- printk("Validating %s ... ", #name); \
-{ \
- u16 d,s; \
- u16 r_lo,r_asm_lo; \
- u16 r_hi,r_asm_hi; \
- u32 flags,inflags; \
- int f,failed = false; \
- char buf1[80],buf2[80]; \
- for (d = 0; d < 0xFF00; d += 0x100) { \
- for (s = 0; s < 0xFF00; s += 0x100) { \
- M.x86.R_EFLG = inflags = flags = def_flags; \
- for (f = 0; f < 2; f++) { \
- name##_asm(&flags,&r_asm_lo,&r_asm_hi,d,s); \
- M.x86.R_AX = d; \
- name(s); \
- r_lo = M.x86.R_AX; \
- r_hi = M.x86.R_DX; \
- if (r_lo != r_asm_lo || r_hi != r_asm_hi || M.x86.R_EFLG != flags)\
- failed = true; \
- if (failed || trace) { \
- if (failed) \
- printk("fail\n"); \
- printk("0x%04X:0x%04X = %-15s(0x%04X,0x%04X), flags = %s -> %s\n", \
- r_hi,r_lo, #name, d, s, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG)); \
- printk("0x%04X:0x%04X = %-15s(0x%04X,0x%04X), flags = %s -> %s\n", \
- r_asm_hi,r_asm_lo, #name"_asm", d, s, print_flags(buf1,inflags), print_flags(buf2,flags)); \
- } \
- M.x86.R_EFLG = inflags = flags = def_flags | (ALL_FLAGS & ~F_OF); \
- if (failed) \
- break; \
- } \
- if (failed) \
- break; \
- } \
- if (failed) \
- break; \
- } \
- if (!failed) \
- printk("passed\n"); \
-}
-
-#define VAL_LONG_MUL(name) \
- printk("Validating %s ... ", #name); \
-{ \
- u32 d,s; \
- u32 r_lo,r_asm_lo; \
- u32 r_hi,r_asm_hi; \
- u32 flags,inflags; \
- int f,failed = false; \
- char buf1[80],buf2[80]; \
- for (d = 0; d < 0xFF000000; d += 0x1000000) { \
- for (s = 0; s < 0xFF000000; s += 0x1000000) { \
- M.x86.R_EFLG = inflags = flags = def_flags; \
- for (f = 0; f < 2; f++) { \
- name##_asm(&flags,&r_asm_lo,&r_asm_hi,d,s); \
- M.x86.R_EAX = d; \
- name(s); \
- r_lo = M.x86.R_EAX; \
- r_hi = M.x86.R_EDX; \
- if (r_lo != r_asm_lo || r_hi != r_asm_hi || M.x86.R_EFLG != flags)\
- failed = true; \
- if (failed || trace) { \
- if (failed) \
- printk("fail\n"); \
- printk("0x%08X:0x%08X = %-15s(0x%08X,0x%08X), flags = %s -> %s\n", \
- r_hi,r_lo, #name, d, s, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG)); \
- printk("0x%08X:0x%08X = %-15s(0x%08X,0x%08X), flags = %s -> %s\n", \
- r_asm_hi,r_asm_lo, #name"_asm", d, s, print_flags(buf1,inflags), print_flags(buf2,flags)); \
- } \
- M.x86.R_EFLG = inflags = flags = def_flags | (ALL_FLAGS & ~F_OF); \
- if (failed) \
- break; \
- } \
- if (failed) \
- break; \
- } \
- if (failed) \
- break; \
- } \
- if (!failed) \
- printk("passed\n"); \
-}
-
-#define VAL_BYTE_DIV(name) \
- printk("Validating %s ... ", #name); \
-{ \
- u16 d,s; \
- u8 r_quot,r_rem,r_asm_quot,r_asm_rem; \
- u32 flags,inflags; \
- int f,failed = false; \
- char buf1[80],buf2[80]; \
- for (d = 0; d < 0xFF00; d += 0x100) { \
- for (s = 1; s < 0xFF; s += 1) { \
- M.x86.R_EFLG = inflags = flags = def_flags; \
- for (f = 0; f < 2; f++) { \
- M.x86.intr = 0; \
- M.x86.R_AX = d; \
- name(s); \
- r_quot = M.x86.R_AL; \
- r_rem = M.x86.R_AH; \
- if (M.x86.intr & INTR_SYNCH) \
- continue; \
- name##_asm(&flags,&r_asm_quot,&r_asm_rem,d,s); \
- if (r_quot != r_asm_quot || r_rem != r_asm_rem || M.x86.R_EFLG != flags) \
- failed = true; \
- if (failed || trace) { \
- if (failed) \
- printk("fail\n"); \
- printk("0x%02X:0x%02X = %-15s(0x%04X,0x%02X), flags = %s -> %s\n", \
- r_quot, r_rem, #name, d, s, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG)); \
- printk("0x%02X:0x%02X = %-15s(0x%04X,0x%02X), flags = %s -> %s\n", \
- r_asm_quot, r_asm_rem, #name"_asm", d, s, print_flags(buf1,inflags), print_flags(buf2,flags)); \
- } \
- M.x86.R_EFLG = inflags = flags = def_flags | (ALL_FLAGS & ~F_OF); \
- if (failed) \
- break; \
- } \
- if (failed) \
- break; \
- } \
- if (failed) \
- break; \
- } \
- if (!failed) \
- printk("passed\n"); \
-}
-
-#define VAL_WORD_DIV(name) \
- printk("Validating %s ... ", #name); \
-{ \
- u32 d,s; \
- u16 r_quot,r_rem,r_asm_quot,r_asm_rem; \
- u32 flags,inflags; \
- int f,failed = false; \
- char buf1[80],buf2[80]; \
- for (d = 0; d < 0xFF000000; d += 0x1000000) { \
- for (s = 0x100; s < 0xFF00; s += 0x100) { \
- M.x86.R_EFLG = inflags = flags = def_flags; \
- for (f = 0; f < 2; f++) { \
- M.x86.intr = 0; \
- M.x86.R_AX = d & 0xFFFF; \
- M.x86.R_DX = d >> 16; \
- name(s); \
- r_quot = M.x86.R_AX; \
- r_rem = M.x86.R_DX; \
- if (M.x86.intr & INTR_SYNCH) \
- continue; \
- name##_asm(&flags,&r_asm_quot,&r_asm_rem,d & 0xFFFF,d >> 16,s);\
- if (r_quot != r_asm_quot || r_rem != r_asm_rem || M.x86.R_EFLG != flags) \
- failed = true; \
- if (failed || trace) { \
- if (failed) \
- printk("fail\n"); \
- printk("0x%04X:0x%04X = %-15s(0x%08X,0x%04X), flags = %s -> %s\n", \
- r_quot, r_rem, #name, d, s, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG)); \
- printk("0x%04X:0x%04X = %-15s(0x%08X,0x%04X), flags = %s -> %s\n", \
- r_asm_quot, r_asm_rem, #name"_asm", d, s, print_flags(buf1,inflags), print_flags(buf2,flags)); \
- } \
- M.x86.R_EFLG = inflags = flags = def_flags | (ALL_FLAGS & ~F_OF); \
- if (failed) \
- break; \
- } \
- if (failed) \
- break; \
- } \
- if (failed) \
- break; \
- } \
- if (!failed) \
- printk("passed\n"); \
-}
-
-#define VAL_LONG_DIV(name) \
- printk("Validating %s ... ", #name); \
-{ \
- u32 d,s; \
- u32 r_quot,r_rem,r_asm_quot,r_asm_rem; \
- u32 flags,inflags; \
- int f,failed = false; \
- char buf1[80],buf2[80]; \
- for (d = 0; d < 0xFF000000; d += 0x1000000) { \
- for (s = 0x100; s < 0xFF00; s += 0x100) { \
- M.x86.R_EFLG = inflags = flags = def_flags; \
- for (f = 0; f < 2; f++) { \
- M.x86.intr = 0; \
- M.x86.R_EAX = d; \
- M.x86.R_EDX = 0; \
- name(s); \
- r_quot = M.x86.R_EAX; \
- r_rem = M.x86.R_EDX; \
- if (M.x86.intr & INTR_SYNCH) \
- continue; \
- name##_asm(&flags,&r_asm_quot,&r_asm_rem,d,0,s); \
- if (r_quot != r_asm_quot || r_rem != r_asm_rem || M.x86.R_EFLG != flags) \
- failed = true; \
- if (failed || trace) { \
- if (failed) \
- printk("fail\n"); \
- printk("0x%08X:0x%08X = %-15s(0x%08X:0x%08X,0x%08X), flags = %s -> %s\n", \
- r_quot, r_rem, #name, 0, d, s, print_flags(buf1,inflags), print_flags(buf2,M.x86.R_EFLG)); \
- printk("0x%08X:0x%08X = %-15s(0x%08X:0x%08X,0x%08X), flags = %s -> %s\n", \
- r_asm_quot, r_asm_rem, #name"_asm", 0, d, s, print_flags(buf1,inflags), print_flags(buf2,flags)); \
- } \
- M.x86.R_EFLG = inflags = flags = def_flags | (ALL_FLAGS & ~F_OF); \
- if (failed) \
- break; \
- } \
- if (failed) \
- break; \
- } \
- if (failed) \
- break; \
- } \
- if (!failed) \
- printk("passed\n"); \
-}
-
-void printk(const char *fmt, ...)
-{
- va_list argptr;
- va_start(argptr, fmt);
- vfprintf(stdout, fmt, argptr);
- fflush(stdout);
- va_end(argptr);
-}
-
-char * print_flags(char *buf,ulong flags)
-{
- char *separator = "";
-
- buf[0] = 0;
- if (flags & F_CF) {
- strcat(buf,separator);
- strcat(buf,"CF");
- separator = ",";
- }
- if (flags & F_PF) {
- strcat(buf,separator);
- strcat(buf,"PF");
- separator = ",";
- }
- if (flags & F_AF) {
- strcat(buf,separator);
- strcat(buf,"AF");
- separator = ",";
- }
- if (flags & F_ZF) {
- strcat(buf,separator);
- strcat(buf,"ZF");
- separator = ",";
- }
- if (flags & F_SF) {
- strcat(buf,separator);
- strcat(buf,"SF");
- separator = ",";
- }
- if (flags & F_OF) {
- strcat(buf,separator);
- strcat(buf,"OF");
- separator = ",";
- }
- if (separator[0] == 0)
- strcpy(buf,"None");
- return buf;
-}
-
-int main(int argc)
-{
- ulong def_flags;
- int trace = false;
-
- if (argc > 1)
- trace = true;
- memset(&M, 0, sizeof(M));
- def_flags = get_flags_asm() & ~ALL_FLAGS;
-
- VAL_WORD_UNARY(aaa_word);
- VAL_WORD_UNARY(aas_word);
-
- VAL_WORD_UNARY(aad_word);
- VAL_WORD_UNARY(aam_word);
-
- VAL_BYTE_BYTE_BINARY(adc_byte);
- VAL_WORD_WORD_BINARY(adc_word);
- VAL_LONG_LONG_BINARY(adc_long);
-
- VAL_BYTE_BYTE_BINARY(add_byte);
- VAL_WORD_WORD_BINARY(add_word);
- VAL_LONG_LONG_BINARY(add_long);
-
- VAL_BYTE_BYTE_BINARY(and_byte);
- VAL_WORD_WORD_BINARY(and_word);
- VAL_LONG_LONG_BINARY(and_long);
-
- VAL_BYTE_BYTE_BINARY(cmp_byte);
- VAL_WORD_WORD_BINARY(cmp_word);
- VAL_LONG_LONG_BINARY(cmp_long);
-
- VAL_BYTE_UNARY(daa_byte);
- VAL_BYTE_UNARY(das_byte); /* Fails for 0x9A (out of range anyway) */
-
- VAL_BYTE_UNARY(dec_byte);
- VAL_WORD_UNARY(dec_word);
- VAL_LONG_UNARY(dec_long);
-
- VAL_BYTE_UNARY(inc_byte);
- VAL_WORD_UNARY(inc_word);
- VAL_LONG_UNARY(inc_long);
-
- VAL_BYTE_BYTE_BINARY(or_byte);
- VAL_WORD_WORD_BINARY(or_word);
- VAL_LONG_LONG_BINARY(or_long);
-
- VAL_BYTE_UNARY(neg_byte);
- VAL_WORD_UNARY(neg_word);
- VAL_LONG_UNARY(neg_long);
-
- VAL_BYTE_UNARY(not_byte);
- VAL_WORD_UNARY(not_word);
- VAL_LONG_UNARY(not_long);
-
- VAL_BYTE_ROTATE(rcl_byte);
- VAL_WORD_ROTATE(rcl_word);
- VAL_LONG_ROTATE(rcl_long);
-
- VAL_BYTE_ROTATE(rcr_byte);
- VAL_WORD_ROTATE(rcr_word);
- VAL_LONG_ROTATE(rcr_long);
-
- VAL_BYTE_ROTATE(rol_byte);
- VAL_WORD_ROTATE(rol_word);
- VAL_LONG_ROTATE(rol_long);
-
- VAL_BYTE_ROTATE(ror_byte);
- VAL_WORD_ROTATE(ror_word);
- VAL_LONG_ROTATE(ror_long);
-
- VAL_BYTE_ROTATE(shl_byte);
- VAL_WORD_ROTATE(shl_word);
- VAL_LONG_ROTATE(shl_long);
-
- VAL_BYTE_ROTATE(shr_byte);
- VAL_WORD_ROTATE(shr_word);
- VAL_LONG_ROTATE(shr_long);
-
- VAL_BYTE_ROTATE(sar_byte);
- VAL_WORD_ROTATE(sar_word);
- VAL_LONG_ROTATE(sar_long);
-
- VAL_WORD_ROTATE_DBL(shld_word);
- VAL_LONG_ROTATE_DBL(shld_long);
-
- VAL_WORD_ROTATE_DBL(shrd_word);
- VAL_LONG_ROTATE_DBL(shrd_long);
-
- VAL_BYTE_BYTE_BINARY(sbb_byte);
- VAL_WORD_WORD_BINARY(sbb_word);
- VAL_LONG_LONG_BINARY(sbb_long);
-
- VAL_BYTE_BYTE_BINARY(sub_byte);
- VAL_WORD_WORD_BINARY(sub_word);
- VAL_LONG_LONG_BINARY(sub_long);
-
- VAL_BYTE_BYTE_BINARY(xor_byte);
- VAL_WORD_WORD_BINARY(xor_word);
- VAL_LONG_LONG_BINARY(xor_long);
-
- VAL_VOID_BYTE_BINARY(test_byte);
- VAL_VOID_WORD_BINARY(test_word);
- VAL_VOID_LONG_BINARY(test_long);
-
- VAL_BYTE_MUL(imul_byte);
- VAL_WORD_MUL(imul_word);
- VAL_LONG_MUL(imul_long);
-
- VAL_BYTE_MUL(mul_byte);
- VAL_WORD_MUL(mul_word);
- VAL_LONG_MUL(mul_long);
-
- VAL_BYTE_DIV(idiv_byte);
- VAL_WORD_DIV(idiv_word);
- VAL_LONG_DIV(idiv_long);
-
- VAL_BYTE_DIV(div_byte);
- VAL_WORD_DIV(div_word);
- VAL_LONG_DIV(div_long);
-
- return 0;
-}
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/debug.h b/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/debug.h
deleted file mode 100644
index 9a4a096c65..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/debug.h
+++ /dev/null
@@ -1,210 +0,0 @@
-/****************************************************************************
-*
-* Realmode X86 Emulator Library
-*
-* Copyright (C) 1996-1999 SciTech Software, Inc.
-* Copyright (C) David Mosberger-Tang
-* Copyright (C) 1999 Egbert Eich
-*
-* ========================================================================
-*
-* Permission to use, copy, modify, distribute, and sell this software and
-* its documentation for any purpose is hereby granted without fee,
-* provided that the above copyright notice appear in all copies and that
-* both that copyright notice and this permission notice appear in
-* supporting documentation, and that the name of the authors not be used
-* in advertising or publicity pertaining to distribution of the software
-* without specific, written prior permission. The authors makes no
-* representations about the suitability of this software for any purpose.
-* It is provided "as is" without express or implied warranty.
-*
-* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-* Developer: Kendall Bennett
-*
-* Description: Header file for debug definitions.
-*
-****************************************************************************/
-
-#ifndef __X86EMU_DEBUG_H
-#define __X86EMU_DEBUG_H
-
-/*---------------------- Macros and type definitions ----------------------*/
-
-/* checks to be enabled for "runtime" */
-
-#define CHECK_IP_FETCH_F 0x1
-#define CHECK_SP_ACCESS_F 0x2
-#define CHECK_MEM_ACCESS_F 0x4 /*using regular linear pointer */
-#define CHECK_DATA_ACCESS_F 0x8 /*using segment:offset*/
-
-#ifdef DEBUG
-# define CHECK_IP_FETCH() (M.x86.check & CHECK_IP_FETCH_F)
-# define CHECK_SP_ACCESS() (M.x86.check & CHECK_SP_ACCESS_F)
-# define CHECK_MEM_ACCESS() (M.x86.check & CHECK_MEM_ACCESS_F)
-# define CHECK_DATA_ACCESS() (M.x86.check & CHECK_DATA_ACCESS_F)
-#else
-# define CHECK_IP_FETCH()
-# define CHECK_SP_ACCESS()
-# define CHECK_MEM_ACCESS()
-# define CHECK_DATA_ACCESS()
-#endif
-
-#ifdef DEBUG
-# define DEBUG_INSTRUMENT() (M.x86.debug & DEBUG_INSTRUMENT_F)
-# define DEBUG_DECODE() (M.x86.debug & DEBUG_DECODE_F)
-# define DEBUG_TRACE() (M.x86.debug & DEBUG_TRACE_F)
-# define DEBUG_STEP() (M.x86.debug & DEBUG_STEP_F)
-# define DEBUG_DISASSEMBLE() (M.x86.debug & DEBUG_DISASSEMBLE_F)
-# define DEBUG_BREAK() (M.x86.debug & DEBUG_BREAK_F)
-# define DEBUG_SVC() (M.x86.debug & DEBUG_SVC_F)
-# define DEBUG_SAVE_IP_CS() (M.x86.debug & DEBUG_SAVE_CS_IP)
-
-# define DEBUG_FS() (M.x86.debug & DEBUG_FS_F)
-# define DEBUG_PROC() (M.x86.debug & DEBUG_PROC_F)
-# define DEBUG_SYSINT() (M.x86.debug & DEBUG_SYSINT_F)
-# define DEBUG_TRACECALL() (M.x86.debug & DEBUG_TRACECALL_F)
-# define DEBUG_TRACECALLREGS() (M.x86.debug & DEBUG_TRACECALL_REGS_F)
-# define DEBUG_SYS() (M.x86.debug & DEBUG_SYS_F)
-# define DEBUG_MEM_TRACE() (M.x86.debug & DEBUG_MEM_TRACE_F)
-# define DEBUG_IO_TRACE() (M.x86.debug & DEBUG_IO_TRACE_F)
-# define DEBUG_DECODE_NOPRINT() (M.x86.debug & DEBUG_DECODE_NOPRINT_F)
-#else
-# define DEBUG_INSTRUMENT() 0
-# define DEBUG_DECODE() 0
-# define DEBUG_TRACE() 0
-# define DEBUG_STEP() 0
-# define DEBUG_DISASSEMBLE() 0
-# define DEBUG_BREAK() 0
-# define DEBUG_SVC() 0
-# define DEBUG_SAVE_IP_CS() 0
-# define DEBUG_FS() 0
-# define DEBUG_PROC() 0
-# define DEBUG_SYSINT() 0
-# define DEBUG_TRACECALL() 0
-# define DEBUG_TRACECALLREGS() 0
-# define DEBUG_SYS() 0
-# define DEBUG_MEM_TRACE() 0
-# define DEBUG_IO_TRACE() 0
-# define DEBUG_DECODE_NOPRINT() 0
-#endif
-
-#ifdef DEBUG
-
-# define DECODE_PRINTF(x) if (DEBUG_DECODE()) \
- x86emu_decode_printf(x)
-# define DECODE_PRINTF2(x,y) if (DEBUG_DECODE()) \
- x86emu_decode_printf2(x,y)
-
-/*
- * The following allow us to look at the bytes of an instruction. The
- * first INCR_INSTRN_LEN, is called everytime bytes are consumed in
- * the decoding process. The SAVE_IP_CS is called initially when the
- * major opcode of the instruction is accessed.
- */
-#define INC_DECODED_INST_LEN(x) \
- if (DEBUG_DECODE()) \
- x86emu_inc_decoded_inst_len(x)
-
-#define SAVE_IP_CS(x,y) \
- if (DEBUG_DECODE() | DEBUG_TRACECALL() | DEBUG_BREAK() \
- | DEBUG_IO_TRACE() | DEBUG_SAVE_IP_CS()) { \
- M.x86.saved_cs = x; \
- M.x86.saved_ip = y; \
- }
-#else
-# define INC_DECODED_INST_LEN(x)
-# define DECODE_PRINTF(x)
-# define DECODE_PRINTF2(x,y)
-# define SAVE_IP_CS(x,y)
-#endif
-
-#ifdef DEBUG
-#define TRACE_REGS() \
- if (DEBUG_DISASSEMBLE()) { \
- x86emu_just_disassemble(); \
- goto EndOfTheInstructionProcedure; \
- } \
- if (DEBUG_TRACE() || DEBUG_DECODE()) X86EMU_trace_regs()
-#else
-# define TRACE_REGS()
-#endif
-
-#ifdef DEBUG
-# define SINGLE_STEP() if (DEBUG_STEP()) x86emu_single_step()
-#else
-# define SINGLE_STEP()
-#endif
-
-#define TRACE_AND_STEP() \
- TRACE_REGS(); \
- SINGLE_STEP()
-
-#ifdef DEBUG
-# define START_OF_INSTR()
-# define END_OF_INSTR() EndOfTheInstructionProcedure: x86emu_end_instr();
-# define END_OF_INSTR_NO_TRACE() x86emu_end_instr();
-#else
-# define START_OF_INSTR()
-# define END_OF_INSTR()
-# define END_OF_INSTR_NO_TRACE()
-#endif
-
-#ifdef DEBUG
-# define CALL_TRACE(u,v,w,x,s) \
- if (DEBUG_TRACECALLREGS()) \
- x86emu_dump_regs(); \
- if (DEBUG_TRACECALL()) \
- printk("%04x:%04x: CALL %s%04x:%04x\n", u , v, s, w, x);
-# define RETURN_TRACE(n,u,v) \
- if (DEBUG_TRACECALLREGS()) \
- x86emu_dump_regs(); \
- if (DEBUG_TRACECALL()) \
- printk("%04x:%04x: %s\n",u,v,n);
-#else
-# define CALL_TRACE(u,v,w,x,s)
-# define RETURN_TRACE(n,u,v)
-#endif
-
-#ifdef DEBUG
-#define DB(x) x
-#else
-#define DB(x)
-#endif
-
-/*-------------------------- Function Prototypes --------------------------*/
-
-#ifdef __cplusplus
-extern "C" { /* Use "C" linkage when in C++ mode */
-#endif
-
-extern void x86emu_inc_decoded_inst_len (int x);
-extern void x86emu_decode_printf (char *x);
-extern void x86emu_decode_printf2 (char *x, int y);
-extern void x86emu_just_disassemble (void);
-extern void x86emu_single_step (void);
-extern void x86emu_end_instr (void);
-extern void x86emu_dump_regs (void);
-extern void x86emu_dump_xregs (void);
-extern void x86emu_print_int_vect (u16 iv);
-extern void x86emu_instrument_instruction (void);
-extern void x86emu_check_ip_access (void);
-extern void x86emu_check_sp_access (void);
-extern void x86emu_check_mem_access (u32 p);
-extern void x86emu_check_data_access (uint s, uint o);
-
-#ifdef __cplusplus
-} /* End of "C" linkage for C++ */
-#endif
-
-#endif /* __X86EMU_DEBUG_H */
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/decode.h b/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/decode.h
deleted file mode 100644
index 321a345399..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/decode.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/****************************************************************************
-*
-* Realmode X86 Emulator Library
-*
-* Copyright (C) 1996-1999 SciTech Software, Inc.
-* Copyright (C) David Mosberger-Tang
-* Copyright (C) 1999 Egbert Eich
-*
-* ========================================================================
-*
-* Permission to use, copy, modify, distribute, and sell this software and
-* its documentation for any purpose is hereby granted without fee,
-* provided that the above copyright notice appear in all copies and that
-* both that copyright notice and this permission notice appear in
-* supporting documentation, and that the name of the authors not be used
-* in advertising or publicity pertaining to distribution of the software
-* without specific, written prior permission. The authors makes no
-* representations about the suitability of this software for any purpose.
-* It is provided "as is" without express or implied warranty.
-*
-* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-* Developer: Kendall Bennett
-*
-* Description: Header file for instruction decoding logic.
-*
-****************************************************************************/
-
-#ifndef __X86EMU_DECODE_H
-#define __X86EMU_DECODE_H
-
-/*---------------------- Macros and type definitions ----------------------*/
-
-/* Instruction Decoding Stuff */
-
-#define FETCH_DECODE_MODRM(mod,rh,rl) fetch_decode_modrm(&mod,&rh,&rl)
-#define DECODE_RM_BYTE_REGISTER(r) decode_rm_byte_register(r)
-#define DECODE_RM_WORD_REGISTER(r) decode_rm_word_register(r)
-#define DECODE_RM_LONG_REGISTER(r) decode_rm_long_register(r)
-#define DECODE_CLEAR_SEGOVR() M.x86.mode &= ~SYSMODE_CLRMASK
-
-/*-------------------------- Function Prototypes --------------------------*/
-
-#ifdef __cplusplus
-extern "C" { /* Use "C" linkage when in C++ mode */
-#endif
-
-void x86emu_intr_raise (u8 type);
-void fetch_decode_modrm (int *mod,int *regh,int *regl);
-u8 fetch_byte_imm (void);
-u16 fetch_word_imm (void);
-u32 fetch_long_imm (void);
-u8 fetch_data_byte (uint offset);
-u8 fetch_data_byte_abs (uint segment, uint offset);
-u16 fetch_data_word (uint offset);
-u16 fetch_data_word_abs (uint segment, uint offset);
-u32 fetch_data_long (uint offset);
-u32 fetch_data_long_abs (uint segment, uint offset);
-void store_data_byte (uint offset, u8 val);
-void store_data_byte_abs (uint segment, uint offset, u8 val);
-void store_data_word (uint offset, u16 val);
-void store_data_word_abs (uint segment, uint offset, u16 val);
-void store_data_long (uint offset, u32 val);
-void store_data_long_abs (uint segment, uint offset, u32 val);
-u8* decode_rm_byte_register(int reg);
-u16* decode_rm_word_register(int reg);
-u32* decode_rm_long_register(int reg);
-u16* decode_rm_seg_register(int reg);
-unsigned decode_rm00_address(int rm);
-unsigned decode_rm01_address(int rm);
-unsigned decode_rm10_address(int rm);
-
-#ifdef __cplusplus
-} /* End of "C" linkage for C++ */
-#endif
-
-#endif /* __X86EMU_DECODE_H */
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/fpu.h b/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/fpu.h
deleted file mode 100644
index 5fb271463b..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/fpu.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/****************************************************************************
-*
-* Realmode X86 Emulator Library
-*
-* Copyright (C) 1996-1999 SciTech Software, Inc.
-* Copyright (C) David Mosberger-Tang
-* Copyright (C) 1999 Egbert Eich
-*
-* ========================================================================
-*
-* Permission to use, copy, modify, distribute, and sell this software and
-* its documentation for any purpose is hereby granted without fee,
-* provided that the above copyright notice appear in all copies and that
-* both that copyright notice and this permission notice appear in
-* supporting documentation, and that the name of the authors not be used
-* in advertising or publicity pertaining to distribution of the software
-* without specific, written prior permission. The authors makes no
-* representations about the suitability of this software for any purpose.
-* It is provided "as is" without express or implied warranty.
-*
-* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-* Developer: Kendall Bennett
-*
-* Description: Header file for FPU instruction decoding.
-*
-****************************************************************************/
-
-#ifndef __X86EMU_FPU_H
-#define __X86EMU_FPU_H
-
-#ifdef __cplusplus
-extern "C" { /* Use "C" linkage when in C++ mode */
-#endif
-
-/* these have to be defined, whether 8087 support compiled in or not. */
-
-extern void x86emuOp_esc_coprocess_d8 (u8 op1);
-extern void x86emuOp_esc_coprocess_d9 (u8 op1);
-extern void x86emuOp_esc_coprocess_da (u8 op1);
-extern void x86emuOp_esc_coprocess_db (u8 op1);
-extern void x86emuOp_esc_coprocess_dc (u8 op1);
-extern void x86emuOp_esc_coprocess_dd (u8 op1);
-extern void x86emuOp_esc_coprocess_de (u8 op1);
-extern void x86emuOp_esc_coprocess_df (u8 op1);
-
-#ifdef __cplusplus
-} /* End of "C" linkage for C++ */
-#endif
-
-#endif /* __X86EMU_FPU_H */
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/ops.h b/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/ops.h
deleted file mode 100644
index 65ea676543..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/ops.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/****************************************************************************
-*
-* Realmode X86 Emulator Library
-*
-* Copyright (C) 1996-1999 SciTech Software, Inc.
-* Copyright (C) David Mosberger-Tang
-* Copyright (C) 1999 Egbert Eich
-*
-* ========================================================================
-*
-* Permission to use, copy, modify, distribute, and sell this software and
-* its documentation for any purpose is hereby granted without fee,
-* provided that the above copyright notice appear in all copies and that
-* both that copyright notice and this permission notice appear in
-* supporting documentation, and that the name of the authors not be used
-* in advertising or publicity pertaining to distribution of the software
-* without specific, written prior permission. The authors makes no
-* representations about the suitability of this software for any purpose.
-* It is provided "as is" without express or implied warranty.
-*
-* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-* Developer: Kendall Bennett
-*
-* Description: Header file for operand decoding functions.
-*
-****************************************************************************/
-
-#ifndef __X86EMU_OPS_H
-#define __X86EMU_OPS_H
-
-extern void (*x86emu_optab[0x100])(u8 op1);
-extern void (*x86emu_optab2[0x100])(u8 op2);
-
-#endif /* __X86EMU_OPS_H */
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/prim_asm.h b/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/prim_asm.h
deleted file mode 100644
index e023cf88da..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/prim_asm.h
+++ /dev/null
@@ -1,970 +0,0 @@
-/****************************************************************************
-*
-* Realmode X86 Emulator Library
-*
-* Copyright (C) 1996-1999 SciTech Software, Inc.
-* Copyright (C) David Mosberger-Tang
-* Copyright (C) 1999 Egbert Eich
-*
-* ========================================================================
-*
-* Permission to use, copy, modify, distribute, and sell this software and
-* its documentation for any purpose is hereby granted without fee,
-* provided that the above copyright notice appear in all copies and that
-* both that copyright notice and this permission notice appear in
-* supporting documentation, and that the name of the authors not be used
-* in advertising or publicity pertaining to distribution of the software
-* without specific, written prior permission. The authors makes no
-* representations about the suitability of this software for any purpose.
-* It is provided "as is" without express or implied warranty.
-*
-* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* ========================================================================
-*
-* Language: Watcom C++ 10.6 or later
-* Environment: Any
-* Developer: Kendall Bennett
-*
-* Description: Inline assembler versions of the primitive operand
-* functions for faster performance. At the moment this is
-* x86 inline assembler, but these functions could be replaced
-* with native inline assembler for each supported processor
-* platform.
-*
-****************************************************************************/
-
-#ifndef __X86EMU_PRIM_ASM_H
-#define __X86EMU_PRIM_ASM_H
-
-#ifdef __WATCOMC__
-
-#ifndef VALIDATE
-#define __HAVE_INLINE_ASSEMBLER__
-#endif
-
-u32 get_flags_asm(void);
-#pragma aux get_flags_asm = \
- "pushf" \
- "pop eax" \
- value [eax] \
- modify exact [eax];
-
-u16 aaa_word_asm(u32 *flags,u16 d);
-#pragma aux aaa_word_asm = \
- "push [edi]" \
- "popf" \
- "aaa" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] \
- value [ax] \
- modify exact [ax];
-
-u16 aas_word_asm(u32 *flags,u16 d);
-#pragma aux aas_word_asm = \
- "push [edi]" \
- "popf" \
- "aas" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] \
- value [ax] \
- modify exact [ax];
-
-u16 aad_word_asm(u32 *flags,u16 d);
-#pragma aux aad_word_asm = \
- "push [edi]" \
- "popf" \
- "aad" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] \
- value [ax] \
- modify exact [ax];
-
-u16 aam_word_asm(u32 *flags,u8 d);
-#pragma aux aam_word_asm = \
- "push [edi]" \
- "popf" \
- "aam" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] \
- value [ax] \
- modify exact [ax];
-
-u8 adc_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux adc_byte_asm = \
- "push [edi]" \
- "popf" \
- "adc al,bl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] [bl] \
- value [al] \
- modify exact [al bl];
-
-u16 adc_word_asm(u32 *flags,u16 d, u16 s);
-#pragma aux adc_word_asm = \
- "push [edi]" \
- "popf" \
- "adc ax,bx" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] [bx] \
- value [ax] \
- modify exact [ax bx];
-
-u32 adc_long_asm(u32 *flags,u32 d, u32 s);
-#pragma aux adc_long_asm = \
- "push [edi]" \
- "popf" \
- "adc eax,ebx" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] [ebx] \
- value [eax] \
- modify exact [eax ebx];
-
-u8 add_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux add_byte_asm = \
- "push [edi]" \
- "popf" \
- "add al,bl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] [bl] \
- value [al] \
- modify exact [al bl];
-
-u16 add_word_asm(u32 *flags,u16 d, u16 s);
-#pragma aux add_word_asm = \
- "push [edi]" \
- "popf" \
- "add ax,bx" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] [bx] \
- value [ax] \
- modify exact [ax bx];
-
-u32 add_long_asm(u32 *flags,u32 d, u32 s);
-#pragma aux add_long_asm = \
- "push [edi]" \
- "popf" \
- "add eax,ebx" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] [ebx] \
- value [eax] \
- modify exact [eax ebx];
-
-u8 and_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux and_byte_asm = \
- "push [edi]" \
- "popf" \
- "and al,bl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] [bl] \
- value [al] \
- modify exact [al bl];
-
-u16 and_word_asm(u32 *flags,u16 d, u16 s);
-#pragma aux and_word_asm = \
- "push [edi]" \
- "popf" \
- "and ax,bx" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] [bx] \
- value [ax] \
- modify exact [ax bx];
-
-u32 and_long_asm(u32 *flags,u32 d, u32 s);
-#pragma aux and_long_asm = \
- "push [edi]" \
- "popf" \
- "and eax,ebx" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] [ebx] \
- value [eax] \
- modify exact [eax ebx];
-
-u8 cmp_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux cmp_byte_asm = \
- "push [edi]" \
- "popf" \
- "cmp al,bl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] [bl] \
- value [al] \
- modify exact [al bl];
-
-u16 cmp_word_asm(u32 *flags,u16 d, u16 s);
-#pragma aux cmp_word_asm = \
- "push [edi]" \
- "popf" \
- "cmp ax,bx" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] [bx] \
- value [ax] \
- modify exact [ax bx];
-
-u32 cmp_long_asm(u32 *flags,u32 d, u32 s);
-#pragma aux cmp_long_asm = \
- "push [edi]" \
- "popf" \
- "cmp eax,ebx" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] [ebx] \
- value [eax] \
- modify exact [eax ebx];
-
-u8 daa_byte_asm(u32 *flags,u8 d);
-#pragma aux daa_byte_asm = \
- "push [edi]" \
- "popf" \
- "daa" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] \
- value [al] \
- modify exact [al];
-
-u8 das_byte_asm(u32 *flags,u8 d);
-#pragma aux das_byte_asm = \
- "push [edi]" \
- "popf" \
- "das" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] \
- value [al] \
- modify exact [al];
-
-u8 dec_byte_asm(u32 *flags,u8 d);
-#pragma aux dec_byte_asm = \
- "push [edi]" \
- "popf" \
- "dec al" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] \
- value [al] \
- modify exact [al];
-
-u16 dec_word_asm(u32 *flags,u16 d);
-#pragma aux dec_word_asm = \
- "push [edi]" \
- "popf" \
- "dec ax" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] \
- value [ax] \
- modify exact [ax];
-
-u32 dec_long_asm(u32 *flags,u32 d);
-#pragma aux dec_long_asm = \
- "push [edi]" \
- "popf" \
- "dec eax" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] \
- value [eax] \
- modify exact [eax];
-
-u8 inc_byte_asm(u32 *flags,u8 d);
-#pragma aux inc_byte_asm = \
- "push [edi]" \
- "popf" \
- "inc al" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] \
- value [al] \
- modify exact [al];
-
-u16 inc_word_asm(u32 *flags,u16 d);
-#pragma aux inc_word_asm = \
- "push [edi]" \
- "popf" \
- "inc ax" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] \
- value [ax] \
- modify exact [ax];
-
-u32 inc_long_asm(u32 *flags,u32 d);
-#pragma aux inc_long_asm = \
- "push [edi]" \
- "popf" \
- "inc eax" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] \
- value [eax] \
- modify exact [eax];
-
-u8 or_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux or_byte_asm = \
- "push [edi]" \
- "popf" \
- "or al,bl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] [bl] \
- value [al] \
- modify exact [al bl];
-
-u16 or_word_asm(u32 *flags,u16 d, u16 s);
-#pragma aux or_word_asm = \
- "push [edi]" \
- "popf" \
- "or ax,bx" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] [bx] \
- value [ax] \
- modify exact [ax bx];
-
-u32 or_long_asm(u32 *flags,u32 d, u32 s);
-#pragma aux or_long_asm = \
- "push [edi]" \
- "popf" \
- "or eax,ebx" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] [ebx] \
- value [eax] \
- modify exact [eax ebx];
-
-u8 neg_byte_asm(u32 *flags,u8 d);
-#pragma aux neg_byte_asm = \
- "push [edi]" \
- "popf" \
- "neg al" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] \
- value [al] \
- modify exact [al];
-
-u16 neg_word_asm(u32 *flags,u16 d);
-#pragma aux neg_word_asm = \
- "push [edi]" \
- "popf" \
- "neg ax" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] \
- value [ax] \
- modify exact [ax];
-
-u32 neg_long_asm(u32 *flags,u32 d);
-#pragma aux neg_long_asm = \
- "push [edi]" \
- "popf" \
- "neg eax" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] \
- value [eax] \
- modify exact [eax];
-
-u8 not_byte_asm(u32 *flags,u8 d);
-#pragma aux not_byte_asm = \
- "push [edi]" \
- "popf" \
- "not al" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] \
- value [al] \
- modify exact [al];
-
-u16 not_word_asm(u32 *flags,u16 d);
-#pragma aux not_word_asm = \
- "push [edi]" \
- "popf" \
- "not ax" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] \
- value [ax] \
- modify exact [ax];
-
-u32 not_long_asm(u32 *flags,u32 d);
-#pragma aux not_long_asm = \
- "push [edi]" \
- "popf" \
- "not eax" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] \
- value [eax] \
- modify exact [eax];
-
-u8 rcl_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux rcl_byte_asm = \
- "push [edi]" \
- "popf" \
- "rcl al,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] [cl] \
- value [al] \
- modify exact [al cl];
-
-u16 rcl_word_asm(u32 *flags,u16 d, u8 s);
-#pragma aux rcl_word_asm = \
- "push [edi]" \
- "popf" \
- "rcl ax,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] [cl] \
- value [ax] \
- modify exact [ax cl];
-
-u32 rcl_long_asm(u32 *flags,u32 d, u8 s);
-#pragma aux rcl_long_asm = \
- "push [edi]" \
- "popf" \
- "rcl eax,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] [cl] \
- value [eax] \
- modify exact [eax cl];
-
-u8 rcr_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux rcr_byte_asm = \
- "push [edi]" \
- "popf" \
- "rcr al,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] [cl] \
- value [al] \
- modify exact [al cl];
-
-u16 rcr_word_asm(u32 *flags,u16 d, u8 s);
-#pragma aux rcr_word_asm = \
- "push [edi]" \
- "popf" \
- "rcr ax,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] [cl] \
- value [ax] \
- modify exact [ax cl];
-
-u32 rcr_long_asm(u32 *flags,u32 d, u8 s);
-#pragma aux rcr_long_asm = \
- "push [edi]" \
- "popf" \
- "rcr eax,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] [cl] \
- value [eax] \
- modify exact [eax cl];
-
-u8 rol_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux rol_byte_asm = \
- "push [edi]" \
- "popf" \
- "rol al,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] [cl] \
- value [al] \
- modify exact [al cl];
-
-u16 rol_word_asm(u32 *flags,u16 d, u8 s);
-#pragma aux rol_word_asm = \
- "push [edi]" \
- "popf" \
- "rol ax,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] [cl] \
- value [ax] \
- modify exact [ax cl];
-
-u32 rol_long_asm(u32 *flags,u32 d, u8 s);
-#pragma aux rol_long_asm = \
- "push [edi]" \
- "popf" \
- "rol eax,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] [cl] \
- value [eax] \
- modify exact [eax cl];
-
-u8 ror_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux ror_byte_asm = \
- "push [edi]" \
- "popf" \
- "ror al,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] [cl] \
- value [al] \
- modify exact [al cl];
-
-u16 ror_word_asm(u32 *flags,u16 d, u8 s);
-#pragma aux ror_word_asm = \
- "push [edi]" \
- "popf" \
- "ror ax,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] [cl] \
- value [ax] \
- modify exact [ax cl];
-
-u32 ror_long_asm(u32 *flags,u32 d, u8 s);
-#pragma aux ror_long_asm = \
- "push [edi]" \
- "popf" \
- "ror eax,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] [cl] \
- value [eax] \
- modify exact [eax cl];
-
-u8 shl_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux shl_byte_asm = \
- "push [edi]" \
- "popf" \
- "shl al,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] [cl] \
- value [al] \
- modify exact [al cl];
-
-u16 shl_word_asm(u32 *flags,u16 d, u8 s);
-#pragma aux shl_word_asm = \
- "push [edi]" \
- "popf" \
- "shl ax,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] [cl] \
- value [ax] \
- modify exact [ax cl];
-
-u32 shl_long_asm(u32 *flags,u32 d, u8 s);
-#pragma aux shl_long_asm = \
- "push [edi]" \
- "popf" \
- "shl eax,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] [cl] \
- value [eax] \
- modify exact [eax cl];
-
-u8 shr_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux shr_byte_asm = \
- "push [edi]" \
- "popf" \
- "shr al,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] [cl] \
- value [al] \
- modify exact [al cl];
-
-u16 shr_word_asm(u32 *flags,u16 d, u8 s);
-#pragma aux shr_word_asm = \
- "push [edi]" \
- "popf" \
- "shr ax,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] [cl] \
- value [ax] \
- modify exact [ax cl];
-
-u32 shr_long_asm(u32 *flags,u32 d, u8 s);
-#pragma aux shr_long_asm = \
- "push [edi]" \
- "popf" \
- "shr eax,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] [cl] \
- value [eax] \
- modify exact [eax cl];
-
-u8 sar_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux sar_byte_asm = \
- "push [edi]" \
- "popf" \
- "sar al,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] [cl] \
- value [al] \
- modify exact [al cl];
-
-u16 sar_word_asm(u32 *flags,u16 d, u8 s);
-#pragma aux sar_word_asm = \
- "push [edi]" \
- "popf" \
- "sar ax,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] [cl] \
- value [ax] \
- modify exact [ax cl];
-
-u32 sar_long_asm(u32 *flags,u32 d, u8 s);
-#pragma aux sar_long_asm = \
- "push [edi]" \
- "popf" \
- "sar eax,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] [cl] \
- value [eax] \
- modify exact [eax cl];
-
-u16 shld_word_asm(u32 *flags,u16 d, u16 fill, u8 s);
-#pragma aux shld_word_asm = \
- "push [edi]" \
- "popf" \
- "shld ax,dx,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] [dx] [cl] \
- value [ax] \
- modify exact [ax dx cl];
-
-u32 shld_long_asm(u32 *flags,u32 d, u32 fill, u8 s);
-#pragma aux shld_long_asm = \
- "push [edi]" \
- "popf" \
- "shld eax,edx,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] [edx] [cl] \
- value [eax] \
- modify exact [eax edx cl];
-
-u16 shrd_word_asm(u32 *flags,u16 d, u16 fill, u8 s);
-#pragma aux shrd_word_asm = \
- "push [edi]" \
- "popf" \
- "shrd ax,dx,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] [dx] [cl] \
- value [ax] \
- modify exact [ax dx cl];
-
-u32 shrd_long_asm(u32 *flags,u32 d, u32 fill, u8 s);
-#pragma aux shrd_long_asm = \
- "push [edi]" \
- "popf" \
- "shrd eax,edx,cl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] [edx] [cl] \
- value [eax] \
- modify exact [eax edx cl];
-
-u8 sbb_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux sbb_byte_asm = \
- "push [edi]" \
- "popf" \
- "sbb al,bl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] [bl] \
- value [al] \
- modify exact [al bl];
-
-u16 sbb_word_asm(u32 *flags,u16 d, u16 s);
-#pragma aux sbb_word_asm = \
- "push [edi]" \
- "popf" \
- "sbb ax,bx" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] [bx] \
- value [ax] \
- modify exact [ax bx];
-
-u32 sbb_long_asm(u32 *flags,u32 d, u32 s);
-#pragma aux sbb_long_asm = \
- "push [edi]" \
- "popf" \
- "sbb eax,ebx" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] [ebx] \
- value [eax] \
- modify exact [eax ebx];
-
-u8 sub_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux sub_byte_asm = \
- "push [edi]" \
- "popf" \
- "sub al,bl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] [bl] \
- value [al] \
- modify exact [al bl];
-
-u16 sub_word_asm(u32 *flags,u16 d, u16 s);
-#pragma aux sub_word_asm = \
- "push [edi]" \
- "popf" \
- "sub ax,bx" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] [bx] \
- value [ax] \
- modify exact [ax bx];
-
-u32 sub_long_asm(u32 *flags,u32 d, u32 s);
-#pragma aux sub_long_asm = \
- "push [edi]" \
- "popf" \
- "sub eax,ebx" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] [ebx] \
- value [eax] \
- modify exact [eax ebx];
-
-void test_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux test_byte_asm = \
- "push [edi]" \
- "popf" \
- "test al,bl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] [bl] \
- modify exact [al bl];
-
-void test_word_asm(u32 *flags,u16 d, u16 s);
-#pragma aux test_word_asm = \
- "push [edi]" \
- "popf" \
- "test ax,bx" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] [bx] \
- modify exact [ax bx];
-
-void test_long_asm(u32 *flags,u32 d, u32 s);
-#pragma aux test_long_asm = \
- "push [edi]" \
- "popf" \
- "test eax,ebx" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] [ebx] \
- modify exact [eax ebx];
-
-u8 xor_byte_asm(u32 *flags,u8 d, u8 s);
-#pragma aux xor_byte_asm = \
- "push [edi]" \
- "popf" \
- "xor al,bl" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [al] [bl] \
- value [al] \
- modify exact [al bl];
-
-u16 xor_word_asm(u32 *flags,u16 d, u16 s);
-#pragma aux xor_word_asm = \
- "push [edi]" \
- "popf" \
- "xor ax,bx" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [ax] [bx] \
- value [ax] \
- modify exact [ax bx];
-
-u32 xor_long_asm(u32 *flags,u32 d, u32 s);
-#pragma aux xor_long_asm = \
- "push [edi]" \
- "popf" \
- "xor eax,ebx" \
- "pushf" \
- "pop [edi]" \
- parm [edi] [eax] [ebx] \
- value [eax] \
- modify exact [eax ebx];
-
-void imul_byte_asm(u32 *flags,u16 *ax,u8 d,u8 s);
-#pragma aux imul_byte_asm = \
- "push [edi]" \
- "popf" \
- "imul bl" \
- "pushf" \
- "pop [edi]" \
- "mov [esi],ax" \
- parm [edi] [esi] [al] [bl] \
- modify exact [esi ax bl];
-
-void imul_word_asm(u32 *flags,u16 *ax,u16 *dx,u16 d,u16 s);
-#pragma aux imul_word_asm = \
- "push [edi]" \
- "popf" \
- "imul bx" \
- "pushf" \
- "pop [edi]" \
- "mov [esi],ax" \
- "mov [ecx],dx" \
- parm [edi] [esi] [ecx] [ax] [bx]\
- modify exact [esi edi ax bx dx];
-
-void imul_long_asm(u32 *flags,u32 *eax,u32 *edx,u32 d,u32 s);
-#pragma aux imul_long_asm = \
- "push [edi]" \
- "popf" \
- "imul ebx" \
- "pushf" \
- "pop [edi]" \
- "mov [esi],eax" \
- "mov [ecx],edx" \
- parm [edi] [esi] [ecx] [eax] [ebx] \
- modify exact [esi edi eax ebx edx];
-
-void mul_byte_asm(u32 *flags,u16 *ax,u8 d,u8 s);
-#pragma aux mul_byte_asm = \
- "push [edi]" \
- "popf" \
- "mul bl" \
- "pushf" \
- "pop [edi]" \
- "mov [esi],ax" \
- parm [edi] [esi] [al] [bl] \
- modify exact [esi ax bl];
-
-void mul_word_asm(u32 *flags,u16 *ax,u16 *dx,u16 d,u16 s);
-#pragma aux mul_word_asm = \
- "push [edi]" \
- "popf" \
- "mul bx" \
- "pushf" \
- "pop [edi]" \
- "mov [esi],ax" \
- "mov [ecx],dx" \
- parm [edi] [esi] [ecx] [ax] [bx]\
- modify exact [esi edi ax bx dx];
-
-void mul_long_asm(u32 *flags,u32 *eax,u32 *edx,u32 d,u32 s);
-#pragma aux mul_long_asm = \
- "push [edi]" \
- "popf" \
- "mul ebx" \
- "pushf" \
- "pop [edi]" \
- "mov [esi],eax" \
- "mov [ecx],edx" \
- parm [edi] [esi] [ecx] [eax] [ebx] \
- modify exact [esi edi eax ebx edx];
-
-void idiv_byte_asm(u32 *flags,u8 *al,u8 *ah,u16 d,u8 s);
-#pragma aux idiv_byte_asm = \
- "push [edi]" \
- "popf" \
- "idiv bl" \
- "pushf" \
- "pop [edi]" \
- "mov [esi],al" \
- "mov [ecx],ah" \
- parm [edi] [esi] [ecx] [ax] [bl]\
- modify exact [esi edi ax bl];
-
-void idiv_word_asm(u32 *flags,u16 *ax,u16 *dx,u16 dlo,u16 dhi,u16 s);
-#pragma aux idiv_word_asm = \
- "push [edi]" \
- "popf" \
- "idiv bx" \
- "pushf" \
- "pop [edi]" \
- "mov [esi],ax" \
- "mov [ecx],dx" \
- parm [edi] [esi] [ecx] [ax] [dx] [bx]\
- modify exact [esi edi ax dx bx];
-
-void idiv_long_asm(u32 *flags,u32 *eax,u32 *edx,u32 dlo,u32 dhi,u32 s);
-#pragma aux idiv_long_asm = \
- "push [edi]" \
- "popf" \
- "idiv ebx" \
- "pushf" \
- "pop [edi]" \
- "mov [esi],eax" \
- "mov [ecx],edx" \
- parm [edi] [esi] [ecx] [eax] [edx] [ebx]\
- modify exact [esi edi eax edx ebx];
-
-void div_byte_asm(u32 *flags,u8 *al,u8 *ah,u16 d,u8 s);
-#pragma aux div_byte_asm = \
- "push [edi]" \
- "popf" \
- "div bl" \
- "pushf" \
- "pop [edi]" \
- "mov [esi],al" \
- "mov [ecx],ah" \
- parm [edi] [esi] [ecx] [ax] [bl]\
- modify exact [esi edi ax bl];
-
-void div_word_asm(u32 *flags,u16 *ax,u16 *dx,u16 dlo,u16 dhi,u16 s);
-#pragma aux div_word_asm = \
- "push [edi]" \
- "popf" \
- "div bx" \
- "pushf" \
- "pop [edi]" \
- "mov [esi],ax" \
- "mov [ecx],dx" \
- parm [edi] [esi] [ecx] [ax] [dx] [bx]\
- modify exact [esi edi ax dx bx];
-
-void div_long_asm(u32 *flags,u32 *eax,u32 *edx,u32 dlo,u32 dhi,u32 s);
-#pragma aux div_long_asm = \
- "push [edi]" \
- "popf" \
- "div ebx" \
- "pushf" \
- "pop [edi]" \
- "mov [esi],eax" \
- "mov [ecx],edx" \
- parm [edi] [esi] [ecx] [eax] [edx] [ebx]\
- modify exact [esi edi eax edx ebx];
-
-#endif
-
-#endif /* __X86EMU_PRIM_ASM_H */
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/prim_ops.h b/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/prim_ops.h
deleted file mode 100644
index 1633fe1fae..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/prim_ops.h
+++ /dev/null
@@ -1,231 +0,0 @@
-/****************************************************************************
-*
-* Realmode X86 Emulator Library
-*
-* Copyright (C) 1996-1999 SciTech Software, Inc.
-* Copyright (C) David Mosberger-Tang
-* Copyright (C) 1999 Egbert Eich
-*
-* ========================================================================
-*
-* Permission to use, copy, modify, distribute, and sell this software and
-* its documentation for any purpose is hereby granted without fee,
-* provided that the above copyright notice appear in all copies and that
-* both that copyright notice and this permission notice appear in
-* supporting documentation, and that the name of the authors not be used
-* in advertising or publicity pertaining to distribution of the software
-* without specific, written prior permission. The authors makes no
-* representations about the suitability of this software for any purpose.
-* It is provided "as is" without express or implied warranty.
-*
-* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-* Developer: Kendall Bennett
-*
-* Description: Header file for primitive operation functions.
-*
-****************************************************************************/
-
-#ifndef __X86EMU_PRIM_OPS_H
-#define __X86EMU_PRIM_OPS_H
-
-#include "x86emu/prim_asm.h"
-
-#ifdef __cplusplus
-extern "C" { /* Use "C" linkage when in C++ mode */
-#endif
-
-u16 aaa_word (u16 d);
-u16 aas_word (u16 d);
-u16 aad_word (u16 d);
-u16 aam_word (u8 d);
-u8 adc_byte (u8 d, u8 s);
-u16 adc_word (u16 d, u16 s);
-u32 adc_long (u32 d, u32 s);
-u8 add_byte (u8 d, u8 s);
-u16 add_word (u16 d, u16 s);
-u32 add_long (u32 d, u32 s);
-u8 and_byte (u8 d, u8 s);
-u16 and_word (u16 d, u16 s);
-u32 and_long (u32 d, u32 s);
-u8 cmp_byte (u8 d, u8 s);
-u16 cmp_word (u16 d, u16 s);
-u32 cmp_long (u32 d, u32 s);
-u8 daa_byte (u8 d);
-u8 das_byte (u8 d);
-u8 dec_byte (u8 d);
-u16 dec_word (u16 d);
-u32 dec_long (u32 d);
-u8 inc_byte (u8 d);
-u16 inc_word (u16 d);
-u32 inc_long (u32 d);
-u8 or_byte (u8 d, u8 s);
-u16 or_word (u16 d, u16 s);
-u32 or_long (u32 d, u32 s);
-u8 neg_byte (u8 s);
-u16 neg_word (u16 s);
-u32 neg_long (u32 s);
-u8 not_byte (u8 s);
-u16 not_word (u16 s);
-u32 not_long (u32 s);
-u8 rcl_byte (u8 d, u8 s);
-u16 rcl_word (u16 d, u8 s);
-u32 rcl_long (u32 d, u8 s);
-u8 rcr_byte (u8 d, u8 s);
-u16 rcr_word (u16 d, u8 s);
-u32 rcr_long (u32 d, u8 s);
-u8 rol_byte (u8 d, u8 s);
-u16 rol_word (u16 d, u8 s);
-u32 rol_long (u32 d, u8 s);
-u8 ror_byte (u8 d, u8 s);
-u16 ror_word (u16 d, u8 s);
-u32 ror_long (u32 d, u8 s);
-u8 shl_byte (u8 d, u8 s);
-u16 shl_word (u16 d, u8 s);
-u32 shl_long (u32 d, u8 s);
-u8 shr_byte (u8 d, u8 s);
-u16 shr_word (u16 d, u8 s);
-u32 shr_long (u32 d, u8 s);
-u8 sar_byte (u8 d, u8 s);
-u16 sar_word (u16 d, u8 s);
-u32 sar_long (u32 d, u8 s);
-u16 shld_word (u16 d, u16 fill, u8 s);
-u32 shld_long (u32 d, u32 fill, u8 s);
-u16 shrd_word (u16 d, u16 fill, u8 s);
-u32 shrd_long (u32 d, u32 fill, u8 s);
-u8 sbb_byte (u8 d, u8 s);
-u16 sbb_word (u16 d, u16 s);
-u32 sbb_long (u32 d, u32 s);
-u8 sub_byte (u8 d, u8 s);
-u16 sub_word (u16 d, u16 s);
-u32 sub_long (u32 d, u32 s);
-void test_byte (u8 d, u8 s);
-void test_word (u16 d, u16 s);
-void test_long (u32 d, u32 s);
-u8 xor_byte (u8 d, u8 s);
-u16 xor_word (u16 d, u16 s);
-u32 xor_long (u32 d, u32 s);
-void imul_byte (u8 s);
-void imul_word (u16 s);
-void imul_long (u32 s);
-void imul_long_direct(u32 *res_lo, u32* res_hi,u32 d, u32 s);
-void mul_byte (u8 s);
-void mul_word (u16 s);
-void mul_long (u32 s);
-void idiv_byte (u8 s);
-void idiv_word (u16 s);
-void idiv_long (u32 s);
-void div_byte (u8 s);
-void div_word (u16 s);
-void div_long (u32 s);
-void ins (int size);
-void outs (int size);
-u16 mem_access_word (int addr);
-void push_word (u16 w);
-void push_long (u32 w);
-u16 pop_word (void);
-u32 pop_long (void);
-
-#if defined(__HAVE_INLINE_ASSEMBLER__) && !defined(PRIM_OPS_NO_REDEFINE_ASM)
-
-#define aaa_word(d) aaa_word_asm(&M.x86.R_EFLG,d)
-#define aas_word(d) aas_word_asm(&M.x86.R_EFLG,d)
-#define aad_word(d) aad_word_asm(&M.x86.R_EFLG,d)
-#define aam_word(d) aam_word_asm(&M.x86.R_EFLG,d)
-#define adc_byte(d,s) adc_byte_asm(&M.x86.R_EFLG,d,s)
-#define adc_word(d,s) adc_word_asm(&M.x86.R_EFLG,d,s)
-#define adc_long(d,s) adc_long_asm(&M.x86.R_EFLG,d,s)
-#define add_byte(d,s) add_byte_asm(&M.x86.R_EFLG,d,s)
-#define add_word(d,s) add_word_asm(&M.x86.R_EFLG,d,s)
-#define add_long(d,s) add_long_asm(&M.x86.R_EFLG,d,s)
-#define and_byte(d,s) and_byte_asm(&M.x86.R_EFLG,d,s)
-#define and_word(d,s) and_word_asm(&M.x86.R_EFLG,d,s)
-#define and_long(d,s) and_long_asm(&M.x86.R_EFLG,d,s)
-#define cmp_byte(d,s) cmp_byte_asm(&M.x86.R_EFLG,d,s)
-#define cmp_word(d,s) cmp_word_asm(&M.x86.R_EFLG,d,s)
-#define cmp_long(d,s) cmp_long_asm(&M.x86.R_EFLG,d,s)
-#define daa_byte(d) daa_byte_asm(&M.x86.R_EFLG,d)
-#define das_byte(d) das_byte_asm(&M.x86.R_EFLG,d)
-#define dec_byte(d) dec_byte_asm(&M.x86.R_EFLG,d)
-#define dec_word(d) dec_word_asm(&M.x86.R_EFLG,d)
-#define dec_long(d) dec_long_asm(&M.x86.R_EFLG,d)
-#define inc_byte(d) inc_byte_asm(&M.x86.R_EFLG,d)
-#define inc_word(d) inc_word_asm(&M.x86.R_EFLG,d)
-#define inc_long(d) inc_long_asm(&M.x86.R_EFLG,d)
-#define or_byte(d,s) or_byte_asm(&M.x86.R_EFLG,d,s)
-#define or_word(d,s) or_word_asm(&M.x86.R_EFLG,d,s)
-#define or_long(d,s) or_long_asm(&M.x86.R_EFLG,d,s)
-#define neg_byte(s) neg_byte_asm(&M.x86.R_EFLG,s)
-#define neg_word(s) neg_word_asm(&M.x86.R_EFLG,s)
-#define neg_long(s) neg_long_asm(&M.x86.R_EFLG,s)
-#define not_byte(s) not_byte_asm(&M.x86.R_EFLG,s)
-#define not_word(s) not_word_asm(&M.x86.R_EFLG,s)
-#define not_long(s) not_long_asm(&M.x86.R_EFLG,s)
-#define rcl_byte(d,s) rcl_byte_asm(&M.x86.R_EFLG,d,s)
-#define rcl_word(d,s) rcl_word_asm(&M.x86.R_EFLG,d,s)
-#define rcl_long(d,s) rcl_long_asm(&M.x86.R_EFLG,d,s)
-#define rcr_byte(d,s) rcr_byte_asm(&M.x86.R_EFLG,d,s)
-#define rcr_word(d,s) rcr_word_asm(&M.x86.R_EFLG,d,s)
-#define rcr_long(d,s) rcr_long_asm(&M.x86.R_EFLG,d,s)
-#define rol_byte(d,s) rol_byte_asm(&M.x86.R_EFLG,d,s)
-#define rol_word(d,s) rol_word_asm(&M.x86.R_EFLG,d,s)
-#define rol_long(d,s) rol_long_asm(&M.x86.R_EFLG,d,s)
-#define ror_byte(d,s) ror_byte_asm(&M.x86.R_EFLG,d,s)
-#define ror_word(d,s) ror_word_asm(&M.x86.R_EFLG,d,s)
-#define ror_long(d,s) ror_long_asm(&M.x86.R_EFLG,d,s)
-#define shl_byte(d,s) shl_byte_asm(&M.x86.R_EFLG,d,s)
-#define shl_word(d,s) shl_word_asm(&M.x86.R_EFLG,d,s)
-#define shl_long(d,s) shl_long_asm(&M.x86.R_EFLG,d,s)
-#define shr_byte(d,s) shr_byte_asm(&M.x86.R_EFLG,d,s)
-#define shr_word(d,s) shr_word_asm(&M.x86.R_EFLG,d,s)
-#define shr_long(d,s) shr_long_asm(&M.x86.R_EFLG,d,s)
-#define sar_byte(d,s) sar_byte_asm(&M.x86.R_EFLG,d,s)
-#define sar_word(d,s) sar_word_asm(&M.x86.R_EFLG,d,s)
-#define sar_long(d,s) sar_long_asm(&M.x86.R_EFLG,d,s)
-#define shld_word(d,fill,s) shld_word_asm(&M.x86.R_EFLG,d,fill,s)
-#define shld_long(d,fill,s) shld_long_asm(&M.x86.R_EFLG,d,fill,s)
-#define shrd_word(d,fill,s) shrd_word_asm(&M.x86.R_EFLG,d,fill,s)
-#define shrd_long(d,fill,s) shrd_long_asm(&M.x86.R_EFLG,d,fill,s)
-#define sbb_byte(d,s) sbb_byte_asm(&M.x86.R_EFLG,d,s)
-#define sbb_word(d,s) sbb_word_asm(&M.x86.R_EFLG,d,s)
-#define sbb_long(d,s) sbb_long_asm(&M.x86.R_EFLG,d,s)
-#define sub_byte(d,s) sub_byte_asm(&M.x86.R_EFLG,d,s)
-#define sub_word(d,s) sub_word_asm(&M.x86.R_EFLG,d,s)
-#define sub_long(d,s) sub_long_asm(&M.x86.R_EFLG,d,s)
-#define test_byte(d,s) test_byte_asm(&M.x86.R_EFLG,d,s)
-#define test_word(d,s) test_word_asm(&M.x86.R_EFLG,d,s)
-#define test_long(d,s) test_long_asm(&M.x86.R_EFLG,d,s)
-#define xor_byte(d,s) xor_byte_asm(&M.x86.R_EFLG,d,s)
-#define xor_word(d,s) xor_word_asm(&M.x86.R_EFLG,d,s)
-#define xor_long(d,s) xor_long_asm(&M.x86.R_EFLG,d,s)
-#define imul_byte(s) imul_byte_asm(&M.x86.R_EFLG,&M.x86.R_AX,M.x86.R_AL,s)
-#define imul_word(s) imul_word_asm(&M.x86.R_EFLG,&M.x86.R_AX,&M.x86.R_DX,M.x86.R_AX,s)
-#define imul_long(s) imul_long_asm(&M.x86.R_EFLG,&M.x86.R_EAX,&M.x86.R_EDX,M.x86.R_EAX,s)
-#define imul_long_direct(res_lo,res_hi,d,s) imul_long_asm(&M.x86.R_EFLG,res_lo,res_hi,d,s)
-#define mul_byte(s) mul_byte_asm(&M.x86.R_EFLG,&M.x86.R_AX,M.x86.R_AL,s)
-#define mul_word(s) mul_word_asm(&M.x86.R_EFLG,&M.x86.R_AX,&M.x86.R_DX,M.x86.R_AX,s)
-#define mul_long(s) mul_long_asm(&M.x86.R_EFLG,&M.x86.R_EAX,&M.x86.R_EDX,M.x86.R_EAX,s)
-#define idiv_byte(s) idiv_byte_asm(&M.x86.R_EFLG,&M.x86.R_AL,&M.x86.R_AH,M.x86.R_AX,s)
-#define idiv_word(s) idiv_word_asm(&M.x86.R_EFLG,&M.x86.R_AX,&M.x86.R_DX,M.x86.R_AX,M.x86.R_DX,s)
-#define idiv_long(s) idiv_long_asm(&M.x86.R_EFLG,&M.x86.R_EAX,&M.x86.R_EDX,M.x86.R_EAX,M.x86.R_EDX,s)
-#define div_byte(s) div_byte_asm(&M.x86.R_EFLG,&M.x86.R_AL,&M.x86.R_AH,M.x86.R_AX,s)
-#define div_word(s) div_word_asm(&M.x86.R_EFLG,&M.x86.R_AX,&M.x86.R_DX,M.x86.R_AX,M.x86.R_DX,s)
-#define div_long(s) div_long_asm(&M.x86.R_EFLG,&M.x86.R_EAX,&M.x86.R_EDX,M.x86.R_EAX,M.x86.R_EDX,s)
-
-#endif
-
-#ifdef __cplusplus
-} /* End of "C" linkage for C++ */
-#endif
-
-#endif /* __X86EMU_PRIM_OPS_H */
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/x86emui.h b/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/x86emui.h
deleted file mode 100644
index bff49039e0..0000000000
--- a/board/MAI/bios_emulator/scitech/src/x86emu/x86emu/x86emui.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/****************************************************************************
-*
-* Realmode X86 Emulator Library
-*
-* Copyright (C) 1996-1999 SciTech Software, Inc.
-* Copyright (C) David Mosberger-Tang
-* Copyright (C) 1999 Egbert Eich
-*
-* ========================================================================
-*
-* Permission to use, copy, modify, distribute, and sell this software and
-* its documentation for any purpose is hereby granted without fee,
-* provided that the above copyright notice appear in all copies and that
-* both that copyright notice and this permission notice appear in
-* supporting documentation, and that the name of the authors not be used
-* in advertising or publicity pertaining to distribution of the software
-* without specific, written prior permission. The authors makes no
-* representations about the suitability of this software for any purpose.
-* It is provided "as is" without express or implied warranty.
-*
-* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* ========================================================================
-*
-* Language: ANSI C
-* Environment: Any
-* Developer: Kendall Bennett
-*
-* Description: Header file for system specific functions. These functions
-* are always compiled and linked in the OS depedent libraries,
-* and never in a binary portable driver.
-*
-****************************************************************************/
-
-#ifndef __X86EMU_X86EMUI_H
-#define __X86EMU_X86EMUI_H
-
-/* If we are compiling in C++ mode, we can compile some functions as
- * inline to increase performance (however the code size increases quite
- * dramatically in this case).
- */
-
-#if defined(__cplusplus) && !defined(_NO_INLINE)
-#define _INLINE inline
-#else
-#define _INLINE static
-#endif
-
-/* Get rid of unused parameters in C++ compilation mode */
-
-#ifdef __cplusplus
-#define X86EMU_UNUSED(v)
-#else
-#define X86EMU_UNUSED(v) v
-#endif
-
-#include "x86emu.h"
-#include "x86emu/regs.h"
-#include "x86emu/debug.h"
-#include "x86emu/decode.h"
-#include "x86emu/ops.h"
-#include "x86emu/prim_ops.h"
-#include "x86emu/fpu.h"
-#include "x86emu/fpu_regs.h"
-#include <stdio.h>
-#include <string.h>
-
-/*--------------------------- Inline Functions ----------------------------*/
-
-#ifdef __cplusplus
-extern "C" { /* Use "C" linkage when in C++ mode */
-#endif
-
-extern u8 (X86APIP sys_rdb)(u32 addr);
-extern u16 (X86APIP sys_rdw)(u32 addr);
-extern u32 (X86APIP sys_rdl)(u32 addr);
-extern void (X86APIP sys_wrb)(u32 addr,u8 val);
-extern void (X86APIP sys_wrw)(u32 addr,u16 val);
-extern void (X86APIP sys_wrl)(u32 addr,u32 val);
-
-extern u8 (X86APIP sys_inb)(X86EMU_pioAddr addr);
-extern u16 (X86APIP sys_inw)(X86EMU_pioAddr addr);
-extern u32 (X86APIP sys_inl)(X86EMU_pioAddr addr);
-extern void (X86APIP sys_outb)(X86EMU_pioAddr addr,u8 val);
-extern void (X86APIP sys_outw)(X86EMU_pioAddr addr,u16 val);
-extern void (X86APIP sys_outl)(X86EMU_pioAddr addr,u32 val);
-
-#ifdef __cplusplus
-} /* End of "C" linkage for C++ */
-#endif
-
-#endif /* __X86EMU_X86EMUI_H */