diff options
Diffstat (limited to 'board/MAI/bios_emulator/scitech/src/pm/dos/_pmdos.asm')
-rw-r--r-- | board/MAI/bios_emulator/scitech/src/pm/dos/_pmdos.asm | 1105 |
1 files changed, 1105 insertions, 0 deletions
diff --git a/board/MAI/bios_emulator/scitech/src/pm/dos/_pmdos.asm b/board/MAI/bios_emulator/scitech/src/pm/dos/_pmdos.asm new file mode 100644 index 00000000000..5c741f346c2 --- /dev/null +++ b/board/MAI/bios_emulator/scitech/src/pm/dos/_pmdos.asm @@ -0,0 +1,1105 @@ +;**************************************************************************** +;* +;* SciTech OS Portability Manager Library +;* +;* ======================================================================== +;* +;* The contents of this file are subject to the SciTech MGL Public +;* License Version 1.0 (the "License"); you may not use this file +;* except in compliance with the License. You may obtain a copy of +;* the License at http://www.scitechsoft.com/mgl-license.txt +;* +;* Software distributed under the License is distributed on an +;* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or +;* implied. See the License for the specific language governing +;* rights and limitations under the License. +;* +;* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc. +;* +;* The Initial Developer of the Original Code is SciTech Software, Inc. +;* All Rights Reserved. +;* +;* ======================================================================== +;* +;* Language: 80386 Assembler, TASM 4.0 or NASM +;* Environment: IBM PC Real mode and 16/32 bit protected mode +;* +;* Description: Low level assembly support for the PM library specific to +;* MSDOS interrupt handling. +;* +;**************************************************************************** + + IDEAL + +include "scitech.mac" ; Memory model macros + +header _pmdos ; Set up memory model + +; Define the size of our local stacks. For real mode code they cant be +; that big, but for 32 bit protected mode code we can make them nice and +; large so that complex C functions can be used. + +ifdef flatmodel +MOUSE_STACK EQU 4096 +TIMER_STACK EQU 4096 +KEY_STACK EQU 1024 +INT10_STACK EQU 1024 +IRQ_STACK EQU 1024 +else +MOUSE_STACK EQU 1024 +TIMER_STACK EQU 512 +KEY_STACK EQU 256 +INT10_STACK EQU 256 +IRQ_STACK EQU 256 +endif + +ifdef USE_NASM + +; Macro to load DS and ES registers with correct value. + +%imacro LOAD_DS 0 +%ifdef flatmodel + mov ds,[cs:_PM_savedDS] + mov es,[cs:_PM_savedDS] +%else + push ax + mov ax,_DATA + mov ds,ax + pop ax +%endif +%endmacro + +; Note that interrupts we disable interrupts during the following stack +; %imacro for correct operation, but we do not enable them again. Normally +; these %imacros are used within interrupt handlers so interrupts should +; already be off. We turn them back on explicitly later if the user code +; needs them to be back on. + +; Macro to switch to a new local stack. + +%imacro NEWSTK 1 + cli + mov [seg_%1],ss + mov [ptr_%1],_sp + mov [TempSeg],ds + mov ss,[TempSeg] + mov _sp,offset %1 +%endmacro + +; %imacro to switch back to the old stack. + +%imacro RESTSTK 1 + cli + mov ss,[seg_%1] + mov _sp,[ptr_%1] +%endmacro + +; %imacro to swap the current stack with the one saved away. + +%imacro SWAPSTK 1 + cli + mov ax,ss + xchg ax,[seg_%1] + mov ss,ax + xchg _sp,[ptr_%1] +%endmacro + +else + +; Macro to load DS and ES registers with correct value. + +MACRO LOAD_DS +ifdef flatmodel + mov ds,[cs:_PM_savedDS] + mov es,[cs:_PM_savedDS] +else + push ax + mov ax,_DATA + mov ds,ax + pop ax +endif +ENDM + +; Note that interrupts we disable interrupts during the following stack +; macro for correct operation, but we do not enable them again. Normally +; these macros are used within interrupt handlers so interrupts should +; already be off. We turn them back on explicitly later if the user code +; needs them to be back on. + +; Macro to switch to a new local stack. + +MACRO NEWSTK stkname + cli + mov [seg_&stkname&],ss + mov [ptr_&stkname&],_sp + mov [TempSeg],ds + mov ss,[TempSeg] + mov _sp,offset stkname +ENDM + +; Macro to switch back to the old stack. + +MACRO RESTSTK stkname + cli + mov ss,[seg_&stkname&] + mov _sp,[ptr_&stkname&] +ENDM + +; Macro to swap the current stack with the one saved away. + +MACRO SWAPSTK stkname + cli + mov ax,ss + xchg ax,[seg_&stkname&] + mov ss,ax + xchg _sp,[ptr_&stkname&] +ENDM + +endif + +begdataseg _pmdos + +ifdef flatmodel + cextern _PM_savedDS,USHORT +endif + cextern _PM_critHandler,CPTR + cextern _PM_breakHandler,CPTR + cextern _PM_timerHandler,CPTR + cextern _PM_rtcHandler,CPTR + cextern _PM_keyHandler,CPTR + cextern _PM_key15Handler,CPTR + cextern _PM_mouseHandler,CPTR + cextern _PM_int10Handler,CPTR + + cextern _PM_ctrlCPtr,DPTR + cextern _PM_ctrlBPtr,DPTR + cextern _PM_critPtr,DPTR + + cextern _PM_prevTimer,FCPTR + cextern _PM_prevRTC,FCPTR + cextern _PM_prevKey,FCPTR + cextern _PM_prevKey15,FCPTR + cextern _PM_prevBreak,FCPTR + cextern _PM_prevCtrlC,FCPTR + cextern _PM_prevCritical,FCPTR + cextern _PM_prevRealTimer,ULONG + cextern _PM_prevRealRTC,ULONG + cextern _PM_prevRealKey,ULONG + cextern _PM_prevRealKey15,ULONG + cextern _PM_prevRealInt10,ULONG + +cpublic _PM_pmdosDataStart + +; Allocate space for all of the local stacks that we need. These stacks +; are not very large, but should be large enough for most purposes +; (generally you want to handle these interrupts quickly, simply storing +; the information for later and then returning). If you need bigger +; stacks then change the appropriate value in here. + + ALIGN 4 + dclb MOUSE_STACK ; Space for local stack (small) +MsStack: ; Stack starts at end! +ptr_MsStack DUINT 0 ; Place to store old stack offset +seg_MsStack dw 0 ; Place to store old stack segment + + ALIGN 4 + dclb INT10_STACK ; Space for local stack (small) +Int10Stack: ; Stack starts at end! +ptr_Int10Stack DUINT 0 ; Place to store old stack offset +seg_Int10Stack dw 0 ; Place to store old stack segment + + ALIGN 4 + dclb TIMER_STACK ; Space for local stack (small) +TmStack: ; Stack starts at end! +ptr_TmStack DUINT 0 ; Place to store old stack offset +seg_TmStack dw 0 ; Place to store old stack segment + + ALIGN 4 + dclb TIMER_STACK ; Space for local stack (small) +RtcStack: ; Stack starts at end! +ptr_RtcStack DUINT 0 ; Place to store old stack offset +seg_RtcStack dw 0 ; Place to store old stack segment +RtcInside dw 0 ; Are we still handling current interrupt + + ALIGN 4 + dclb KEY_STACK ; Space for local stack (small) +KyStack: ; Stack starts at end! +ptr_KyStack DUINT 0 ; Place to store old stack offset +seg_KyStack dw 0 ; Place to store old stack segment +KyInside dw 0 ; Are we still handling current interrupt + + ALIGN 4 + dclb KEY_STACK ; Space for local stack (small) +Ky15Stack: ; Stack starts at end! +ptr_Ky15Stack DUINT 0 ; Place to store old stack offset +seg_Ky15Stack dw 0 ; Place to store old stack segment + +TempSeg dw 0 ; Place to store stack segment + +cpublic _PM_pmdosDataEnd + +enddataseg _pmdos + +begcodeseg _pmdos ; Start of code segment + +cpublic _PM_pmdosCodeStart + +;---------------------------------------------------------------------------- +; PM_mouseISR - Mouse interrupt subroutine dispatcher +;---------------------------------------------------------------------------- +; Interrupt subroutine called by the mouse driver upon interrupts, to +; dispatch control to high level C based subroutines. Interrupts are on +; when we call the user code. +; +; It is _extremely_ important to save the state of the extended registers +; as these may well be trashed by the routines called from here and not +; restored correctly by the mouse interface module. +; +; NOTE: This routine switches to a local stack before calling any C code, +; and hence is _not_ re-entrant. For mouse handlers this is not a +; problem, as the mouse driver arbitrates calls to the user mouse +; handler for us. +; +; Entry: AX - Condition mask giving reason for call +; BX - Mouse button state +; CX - Horizontal cursor coordinate +; DX - Vertical cursor coordinate +; SI - Horizontal mickey value +; DI - Vertical mickey value +; +;---------------------------------------------------------------------------- +ifdef DJGPP +cprocstart _PM_mouseISR +else +cprocfar _PM_mouseISR +endif + + push ds ; Save value of DS + push es + pushad ; Save _all_ extended registers + cld ; Clear direction flag + + LOAD_DS ; Load DS register + NEWSTK MsStack ; Switch to local stack + +; Call the installed high level C code routine + + clrhi dx ; Clear out high order values + clrhi cx + clrhi bx + clrhi ax + sgnhi si + sgnhi di + + push _di + push _si + push _dx + push _cx + push _bx + push _ax + sti ; Enable interrupts + call [CPTR _PM_mouseHandler] + _add sp,12,24 + + RESTSTK MsStack ; Restore previous stack + + popad ; Restore all extended registers + pop es + pop ds + ret ; We are done!! + +cprocend + +;---------------------------------------------------------------------------- +; PM_timerISR - Timer interrupt subroutine dispatcher +;---------------------------------------------------------------------------- +; Hardware interrupt handler for the timer interrupt, to dispatch control +; to high level C based subroutines. We save the state of all registers +; in this routine, and switch to a local stack. Interrupts are *off* +; when we call the user code. +; +; NOTE: This routine switches to a local stack before calling any C code, +; and hence is _not_ re-entrant. Make sure your C code executes as +; quickly as possible, since a timer overrun will simply hang the +; system. +;---------------------------------------------------------------------------- +cprocfar _PM_timerISR + + push ds ; Save value of DS + push es + pushad ; Save _all_ extended registers + cld ; Clear direction flag + + LOAD_DS ; Load DS register + + NEWSTK TmStack ; Switch to local stack + call [CPTR _PM_timerHandler] + RESTSTK TmStack ; Restore previous stack + + popad ; Restore all extended registers + pop es + pop ds + iret ; Return from interrupt + +cprocend + +;---------------------------------------------------------------------------- +; PM_chainPrevTimer - Chain to previous timer interrupt and return +;---------------------------------------------------------------------------- +; Chains to the previous timer interrupt routine and returns control +; back to the high level interrupt handler. +;---------------------------------------------------------------------------- +cprocstart PM_chainPrevTimer + +ifdef TNT + push eax + push ebx + push ecx + pushfd ; Push flags on stack to simulate interrupt + mov ax,250Eh ; Call real mode procedure function + mov ebx,[_PM_prevRealTimer] + mov ecx,1 ; Copy real mode flags to real mode stack + int 21h ; Call the real mode code + popfd + pop ecx + pop ebx + pop eax + ret +else + SWAPSTK TmStack ; Swap back to previous stack + pushf ; Save state of interrupt flag + pushf ; Push flags on stack to simulate interrupt +ifdef USE_NASM + call far dword [_PM_prevTimer] +else + call [_PM_prevTimer] +endif + popf ; Restore state of interrupt flag + SWAPSTK TmStack ; Swap back to C stack again + ret +endif + +cprocend + +; Macro to delay briefly to ensure that enough time has elapsed between +; successive I/O accesses so that the device being accessed can respond +; to both accesses even on a very fast PC. + +ifdef USE_NASM +%macro DELAY 0 + jmp short $+2 + jmp short $+2 + jmp short $+2 +%endmacro +%macro IODELAYN 1 +%rep %1 + DELAY +%endrep +%endmacro +else +macro DELAY + jmp short $+2 + jmp short $+2 + jmp short $+2 +endm +macro IODELAYN N + rept N + DELAY + endm +endm +endif + +;---------------------------------------------------------------------------- +; PM_rtcISR - Real time clock interrupt subroutine dispatcher +;---------------------------------------------------------------------------- +; Hardware interrupt handler for the timer interrupt, to dispatch control +; to high level C based subroutines. We save the state of all registers +; in this routine, and switch to a local stack. Interrupts are *off* +; when we call the user code. +; +; NOTE: This routine switches to a local stack before calling any C code, +; and hence is _not_ re-entrant. Make sure your C code executes as +; quickly as possible, since a timer overrun will simply hang the +; system. +;---------------------------------------------------------------------------- +cprocfar _PM_rtcISR + + push ds ; Save value of DS + push es + pushad ; Save _all_ extended registers + cld ; Clear direction flag + +; Clear priority interrupt controller and re-enable interrupts so we +; dont lock things up for long. + + mov al,20h + out 0A0h,al + out 020h,al + +; Clear real-time clock timeout + + in al,70h ; Read CMOS index register + push _ax ; and save for later + IODELAYN 3 + mov al,0Ch + out 70h,al + IODELAYN 5 + in al,71h + +; Call the C interrupt handler function + + LOAD_DS ; Load DS register + cmp [BYTE RtcInside],1 ; Check for mutual exclusion + je @@Exit + mov [BYTE RtcInside],1 + NEWSTK RtcStack ; Switch to local stack + sti ; Re-enable interrupts + call [CPTR _PM_rtcHandler] + RESTSTK RtcStack ; Restore previous stack + mov [BYTE RtcInside],0 + +@@Exit: pop _ax + out 70h,al ; Restore CMOS index register + popad ; Restore all extended registers + pop es + pop ds + iret ; Return from interrupt + +cprocend + +ifdef flatmodel +;---------------------------------------------------------------------------- +; PM_irqISRTemplate - Hardware interrupt handler IRQ template +;---------------------------------------------------------------------------- +; Hardware interrupt handler for any interrupt, to dispatch control +; to high level C based subroutines. We save the state of all registers +; in this routine, and switch to a local stack. Interrupts are *off* +; when we call the user code. +; +; NOTE: This routine switches to a local stack before calling any C code, +; and hence is _not_ re-entrant. Make sure your C code executes as +; quickly as possible. +;---------------------------------------------------------------------------- +cprocfar _PM_irqISRTemplate + + push ebx + mov ebx,0 ; Relocation adjustment factor + jmp __IRQEntry + +; Global variables stored in the IRQ thunk code segment + +_CHandler dd 0 ; Pointer to C interrupt handler +_PrevIRQ dd 0 ; Previous IRQ handler + dd 0 +_IRQ dd 0 ; IRQ we are hooked for +ptr_IRQStack DUINT 0 ; Place to store old stack offset +seg_IRQStack dw 0 ; Place to store old stack segment +_Inside db 0 ; Mutual exclusion flag + ALIGN 4 + dclb IRQ_STACK ; Space for local stack +_IRQStack: ; Stack starts at end! + +; Check for and reject spurious IRQ 7 signals + +__IRQEntry: + cmp [BYTE cs:ebx+_IRQ],7 ; Spurious IRQs occur only on IRQ 7 + jmp @@ValidIRQ + push eax + mov al,1011b ; OCW3: read ISR + out 20h,al ; (Intel Peripheral Components, 1991, + in al,20h ; p. 3-188) + shl al,1 ; Set C = bit 7 (IRQ 7) of ISR register + pop eax + jc @@ValidIRQ + iret ; Return from interrupt + +; Save all registers for duration of IRQ handler + +@@ValidIRQ: + push ds ; Save value of DS + push es + pushad ; Save _all_ extended registers + cld ; Clear direction flag + LOAD_DS ; Load DS register + +; Send an EOI to the PIC + + mov al,20h ; Send EOI to PIC + cmp [BYTE ebx+_IRQ],8 ; Clear PIC1 first if IRQ >= 8 + jb @@1 + out 0A0h,al +@@1: out 20h,al + +; Check for mutual exclusion + + cmp [BYTE ebx+_Inside],1 + je @@ChainOldHandler + mov [BYTE ebx+_Inside],1 + +; Call the C interrupt handler function + + mov [ebx+seg_IRQStack],ss ; Switch to local stack + mov [ebx+ptr_IRQStack],esp + mov [TempSeg],ds + mov ss,[TempSeg] + lea esp,[ebx+_IRQStack] + sti ; Re-enable interrupts + push ebx + call [DWORD ebx+_CHandler] + pop ebx + cli + mov ss,[ebx+seg_IRQStack] ; Restore previous stack + mov esp,[ebx+ptr_IRQStack] + or eax,eax + jz @@ChainOldHandler ; Chain if not handled for shared IRQ + +@@Exit: mov [BYTE ebx+_Inside],0 + popad ; Restore all extended registers + pop es + pop ds + pop ebx + iret ; Return from interrupt + +@@ChainOldHandler: + cmp [DWORD ebx+_PrevIRQ],0 + jz @@Exit + mov [BYTE ebx+_Inside],0 + mov eax,[DWORD ebx+_PrevIRQ] + mov ebx,[DWORD ebx+_PrevIRQ+4] + mov [DWORD _PrevIRQ],eax + mov [DWORD _PrevIRQ+4],ebx + popad ; Restore all extended registers + pop es + pop ds + pop ebx + jmp [cs:_PrevIRQ] ; Chain to previous IRQ handler + +cprocend +cpublic _PM_irqISRTemplateEnd +endif + +;---------------------------------------------------------------------------- +; PM_keyISR - keyboard interrupt subroutine dispatcher +;---------------------------------------------------------------------------- +; Hardware interrupt handler for the keyboard interrupt, to dispatch control +; to high level C based subroutines. We save the state of all registers +; in this routine, and switch to a local stack. Interrupts are *off* +; when we call the user code. +; +; NOTE: This routine switches to a local stack before calling any C code, +; and hence is _not_ re-entrant. However we ensure within this routine +; mutual exclusion to the keyboard handling routine. +;---------------------------------------------------------------------------- +cprocfar _PM_keyISR + + push ds ; Save value of DS + push es + pushad ; Save _all_ extended registers + cld ; Clear direction flag + + LOAD_DS ; Load DS register + + cmp [BYTE KyInside],1 ; Check for mutual exclusion + je @@Reissued + + mov [BYTE KyInside],1 + NEWSTK KyStack ; Switch to local stack + call [CPTR _PM_keyHandler] ; Call C code + RESTSTK KyStack ; Restore previous stack + mov [BYTE KyInside],0 + +@@Exit: popad ; Restore all extended registers + pop es + pop ds + iret ; Return from interrupt + +; When the BIOS keyboard handler needs to change the SHIFT status lights +; on the keyboard, in the process of doing this the keyboard controller +; re-issues another interrupt, while the current handler is still executing. +; If we recieve another interrupt while still handling the current one, +; then simply chain directly to the previous handler. +; +; Note that for most DOS extenders, the real mode interrupt handler that we +; install takes care of this for us. + +@@Reissued: +ifdef TNT + push eax + push ebx + push ecx + pushfd ; Push flags on stack to simulate interrupt + mov ax,250Eh ; Call real mode procedure function + mov ebx,[_PM_prevRealKey] + mov ecx,1 ; Copy real mode flags to real mode stack + int 21h ; Call the real mode code + popfd + pop ecx + pop ebx + pop eax +else + pushf +ifdef USE_NASM + call far dword [_PM_prevKey] +else + call [_PM_prevKey] +endif +endif + jmp @@Exit + +cprocend + +;---------------------------------------------------------------------------- +; PM_chainPrevkey - Chain to previous key interrupt and return +;---------------------------------------------------------------------------- +; Chains to the previous key interrupt routine and returns control +; back to the high level interrupt handler. +;---------------------------------------------------------------------------- +cprocstart PM_chainPrevKey + +ifdef TNT + push eax + push ebx + push ecx + pushfd ; Push flags on stack to simulate interrupt + mov ax,250Eh ; Call real mode procedure function + mov ebx,[_PM_prevRealKey] + mov ecx,1 ; Copy real mode flags to real mode stack + int 21h ; Call the real mode code + popfd + pop ecx + pop ebx + pop eax + ret +else + +; YIKES! For some strange reason, when execution returns from the +; previous keyboard handler, interrupts are re-enabled!! Since we expect +; interrupts to remain off during the duration of our handler, this can +; cause havoc. However our stack macros always turn off interrupts, so they +; will be off when we exit this routine. Obviously there is a tiny weeny +; window when interrupts will be enabled, but there is nothing we can +; do about this. + + SWAPSTK KyStack ; Swap back to previous stack + pushf ; Push flags on stack to simulate interrupt +ifdef USE_NASM + call far dword [_PM_prevKey] +else + call [_PM_prevKey] +endif + SWAPSTK KyStack ; Swap back to C stack again + ret +endif + +cprocend + +;---------------------------------------------------------------------------- +; PM_key15ISR - Int 15h keyboard interrupt subroutine dispatcher +;---------------------------------------------------------------------------- +; This routine gets called if we have been called to handle the Int 15h +; keyboard interrupt callout from real mode. +; +; Entry: AX - Hardware scan code to process +; Exit: AX - Hardware scan code to process (0 to ignore) +;---------------------------------------------------------------------------- +cprocfar _PM_key15ISR + + push ds + push es + LOAD_DS + cmp ah,4Fh + jnz @@NotOurs ; Quit if not keyboard callout + + pushad + cld ; Clear direction flag + xor ah,ah ; AX := scan code + NEWSTK Ky15Stack ; Switch to local stack + push _ax + call [CPTR _PM_key15Handler] ; Call C code + _add sp,2,4 + RESTSTK Ky15Stack ; Restore previous stack + test ax,ax + jz @@1 + stc ; Set carry to process as normal + jmp @@2 +@@1: clc ; Clear carry to ignore scan code +@@2: popad + jmp @@Exit ; We are done + +@@NotOurs: +ifdef TNT + push eax + push ebx + push ecx + pushfd ; Push flags on stack to simulate interrupt + mov ax,250Eh ; Call real mode procedure function + mov ebx,[_PM_prevRealKey15] + mov ecx,1 ; Copy real mode flags to real mode stack + int 21h ; Call the real mode code + popfd + pop ecx + pop ebx + pop eax +else + pushf +ifdef USE_NASM + call far dword [_PM_prevKey15] +else + call [_PM_prevKey15] +endif +endif +@@Exit: pop es + pop ds +ifdef flatmodel + retf 4 +else + retf 2 +endif + +cprocend + +;---------------------------------------------------------------------------- +; PM_breakISR - Control Break interrupt subroutine dispatcher +;---------------------------------------------------------------------------- +; Hardware interrupt handler for the Ctrl-Break interrupt. We simply set +; the Ctrl-Break flag to a 1 and leave (note that this is accessed through +; a far pointer, as it may well be located in conventional memory). +;---------------------------------------------------------------------------- +cprocfar _PM_breakISR + + sti + push ds ; Save value of DS + push es + push _bx + + LOAD_DS ; Load DS register +ifdef flatmodel + mov ebx,[_PM_ctrlBPtr] +else + les bx,[_PM_ctrlBPtr] +endif + mov [UINT _ES _bx],1 + +; Run alternate break handler code if installed + + cmp [CPTR _PM_breakHandler],0 + je @@Exit + + pushad + mov _ax,1 + push _ax + call [CPTR _PM_breakHandler] ; Call C code + pop _ax + popad + +@@Exit: pop _bx + pop es + pop ds + iret ; Return from interrupt + +cprocend + +;---------------------------------------------------------------------------- +; int PM_ctrlBreakHit(int clearFlag) +;---------------------------------------------------------------------------- +; Returns the current state of the Ctrl-Break flag and possibly clears it. +;---------------------------------------------------------------------------- +cprocstart PM_ctrlBreakHit + + ARG clearFlag:UINT + + enter_c + pushf ; Save interrupt status + push es +ifdef flatmodel + mov ebx,[_PM_ctrlBPtr] +else + les bx,[_PM_ctrlBPtr] +endif + cli ; No interrupts thanks! + mov _ax,[_ES _bx] + test [BYTE clearFlag],1 + jz @@Done + mov [UINT _ES _bx],0 + +@@Done: pop es + popf ; Restore interrupt status + leave_c + ret + +cprocend + +;---------------------------------------------------------------------------- +; PM_ctrlCISR - Control Break interrupt subroutine dispatcher +;---------------------------------------------------------------------------- +; Hardware interrupt handler for the Ctrl-C interrupt. We simply set +; the Ctrl-C flag to a 1 and leave (note that this is accessed through +; a far pointer, as it may well be located in conventional memory). +;---------------------------------------------------------------------------- +cprocfar _PM_ctrlCISR + + sti + push ds ; Save value of DS + push es + push _bx + + LOAD_DS ; Load DS register +ifdef flatmodel + mov ebx,[_PM_ctrlCPtr] +else + les bx,[_PM_ctrlCPtr] +endif + mov [UINT _ES _bx],1 + +; Run alternate break handler code if installed + + cmp [CPTR _PM_breakHandler],0 + je @@Exit + + pushad + mov _ax,0 + push _ax + call [CPTR _PM_breakHandler] ; Call C code + pop _ax + popad + +@@Exit: pop _bx + pop es + pop ds + iret ; Return from interrupt + iretd + +cprocend + +;---------------------------------------------------------------------------- +; int PM_ctrlCHit(int clearFlag) +;---------------------------------------------------------------------------- +; Returns the current state of the Ctrl-C flag and possibly clears it. +;---------------------------------------------------------------------------- +cprocstart PM_ctrlCHit + + ARG clearFlag:UINT + + enter_c + pushf ; Save interrupt status + push es +ifdef flatmodel + mov ebx,[_PM_ctrlCPtr] +else + les bx,[_PM_ctrlCPtr] +endif + cli ; No interrupts thanks! + mov _ax,[_ES _bx] + test [BYTE clearFlag],1 + jz @@Done + mov [UINT _ES _bx],0 + +@@Done: + pop es + popf ; Restore interrupt status + leave_c + ret + +cprocend + +;---------------------------------------------------------------------------- +; PM_criticalISR - Control Error handler interrupt subroutine dispatcher +;---------------------------------------------------------------------------- +; Interrupt handler for the MSDOS Critical Error interrupt, to dispatch +; control to high level C based subroutines. We save the state of all +; registers in this routine, and switch to a local stack. We also pass +; the values of the AX and DI registers to the as pointers, so that the +; values can be modified before returning to MSDOS. +;---------------------------------------------------------------------------- +cprocfar _PM_criticalISR + + sti + push ds ; Save value of DS + push es + push _bx ; Save register values changed + cld ; Clear direction flag + + LOAD_DS ; Load DS register +ifdef flatmodel + mov ebx,[_PM_critPtr] +else + les bx,[_PM_critPtr] +endif + mov [_ES _bx],ax + mov [_ES _bx+2],di + +; Run alternate critical handler code if installed + + cmp [CPTR _PM_critHandler],0 + je @@NoAltHandler + + pushad + push _di + push _ax + call [CPTR _PM_critHandler] ; Call C code + _add sp,4,8 + popad + + pop _bx + pop es + pop ds + iret ; Return from interrupt + +@@NoAltHandler: + mov ax,3 ; Tell MSDOS to fail the operation + pop _bx + pop es + pop ds + iret ; Return from interrupt + +cprocend + +;---------------------------------------------------------------------------- +; int PM_criticalError(int *axVal,int *diVal,int clearFlag) +;---------------------------------------------------------------------------- +; Returns the current state of the critical error flags, and the values that +; MSDOS passed in the AX and DI registers to our handler. +;---------------------------------------------------------------------------- +cprocstart PM_criticalError + + ARG axVal:DPTR, diVal:DPTR, clearFlag:UINT + + enter_c + pushf ; Save interrupt status + push es +ifdef flatmodel + mov ebx,[_PM_critPtr] +else + les bx,[_PM_critPtr] +endif + cli ; No interrupts thanks! + xor _ax,_ax + xor _di,_di + mov ax,[_ES _bx] + mov di,[_ES _bx+2] + test [BYTE clearFlag],1 + jz @@NoClear + mov [ULONG _ES _bx],0 +@@NoClear: + _les _bx,[axVal] + mov [_ES _bx],_ax + _les _bx,[diVal] + mov [_ES _bx],_di + pop es + popf ; Restore interrupt status + leave_c + ret + +cprocend + +;---------------------------------------------------------------------------- +; void PM_setMouseHandler(int mask, PM_mouseHandler mh) +;---------------------------------------------------------------------------- +cprocstart _PM_setMouseHandler + + ARG mouseMask:UINT + + enter_c + push es + + mov ax,0Ch ; AX := Function 12 - install interrupt sub + mov _cx,[mouseMask] ; CX := mouse mask + mov _dx,offset _PM_mouseISR + push cs + pop es ; ES:_DX -> mouse handler + int 33h ; Call mouse driver + + pop es + leave_c + ret + +cprocend + +ifdef flatmodel + +;---------------------------------------------------------------------------- +; void PM_mousePMCB(void) +;---------------------------------------------------------------------------- +; Mouse realmode callback routine. Upon entry to this routine, we recieve +; the following from the DPMI server: +; +; Entry: DS:_SI -> Real mode stack at time of call +; ES:_DI -> Real mode register data structure +; SS:_SP -> Locked protected mode stack to use +;---------------------------------------------------------------------------- +cprocfar _PM_mousePMCB + + pushad + mov eax,[es:_di+1Ch] ; Load register values from real mode + mov ebx,[es:_di+10h] + mov ecx,[es:_di+18h] + mov edx,[es:_di+14h] + mov esi,[es:_di+04h] + mov edi,[es:_di] + call _PM_mouseISR ; Call the mouse handler + popad + + mov ax,[ds:_si] + mov [es:_di+2Ah],ax ; Plug in return IP address + mov ax,[ds:_si+2] + mov [es:_di+2Ch],ax ; Plug in return CS value + add [WORD es:_di+2Eh],4 ; Remove return address from stack + iret ; Go back to real mode! + +cprocend + +;---------------------------------------------------------------------------- +; void PM_int10PMCB(void) +;---------------------------------------------------------------------------- +; int10 realmode callback routine. Upon entry to this routine, we recieve +; the following from the DPMI server: +; +; Entry: DS:ESI -> Real mode stack at time of call +; ES:EDI -> Real mode register data structure +; SS:ESP -> Locked protected mode stack to use +;---------------------------------------------------------------------------- +cprocfar _PM_int10PMCB + + pushad + push ds + push es + push fs + + pushfd + pop eax + mov [es:edi+20h],ax ; Save return flag status + mov ax,[ds:esi] + mov [es:edi+2Ah],ax ; Plug in return IP address + mov ax,[ds:esi+2] + mov [es:edi+2Ch],ax ; Plug in return CS value + add [WORD es:edi+2Eh],4 ; Remove return address from stack + +; Call the install int10 handler in protected mode. This function gets called +; with DS set to the current data selector, and ES:EDI pointing the the +; real mode DPMI register structure at the time of the interrupt. The +; handle must be written in assembler to be able to extract the real mode +; register values from the structure + + push es + pop fs ; FS:EDI -> real mode registers + LOAD_DS + NEWSTK Int10Stack ; Switch to local stack + + call [_PM_int10Handler] + + RESTSTK Int10Stack ; Restore previous stack + pop fs + pop es + pop ds + popad + iret ; Go back to real mode! + +cprocend + +endif + +cpublic _PM_pmdosCodeEnd + +endcodeseg _pmdos + + END ; End of module |