summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/Kconfig2
-rw-r--r--arch/arm/include/asm/arch-fsl-layerscape/config.h2
-rw-r--r--arch/powerpc/cpu/mpc85xx/Kconfig70
-rw-r--r--arch/powerpc/cpu/mpc85xx/cpu.c3
-rw-r--r--arch/powerpc/cpu/mpc85xx/spl_minimal.c4
-rw-r--r--arch/powerpc/include/asm/config_mpc85xx.h42
6 files changed, 72 insertions, 51 deletions
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 91a5863c97f..8a7bbb4a655 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -85,6 +85,7 @@ config ARCH_LS1043A
select SYS_FSL_ERRATUM_A010539
select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_DDR4
+ select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
@@ -123,6 +124,7 @@ config ARCH_LS1046A
select SYS_FSL_ERRATUM_A010539
select SYS_FSL_HAS_DDR4
select SYS_FSL_SRDS_2
+ select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index 1850008a6d1..5824778ca28 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -209,7 +209,6 @@
/* SoC related */
#ifdef CONFIG_ARCH_LS1043A
-#define CONFIG_SYS_FSL_QMAN_V3
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 7
#define CONFIG_SYS_NUM_FM1_10GEC 1
@@ -256,7 +255,6 @@
#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE
#elif defined(CONFIG_ARCH_LS1046A)
-#define CONFIG_SYS_FSL_QMAN_V3
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 8
#define CONFIG_SYS_NUM_FM1_10GEC 2
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index d01e69bf892..81f7991268e 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -78,6 +78,7 @@ config TARGET_P3041DS
select PHYS_64BIT
select ARCH_P3041
select BOARD_LATE_INIT if CHAIN_OF_TRUST
+ select FSL_NGPIXIS
imply CMD_SATA
imply PANIC_HANG
@@ -86,6 +87,7 @@ config TARGET_P4080DS
select PHYS_64BIT
select ARCH_P4080
select BOARD_LATE_INIT if CHAIN_OF_TRUST
+ select FSL_NGPIXIS
imply CMD_SATA
imply PANIC_HANG
@@ -94,6 +96,8 @@ config TARGET_P5040DS
select PHYS_64BIT
select ARCH_P5040
select BOARD_LATE_INIT if CHAIN_OF_TRUST
+ select FSL_NGPIXIS
+ select SYS_FSL_RAID_ENGINE
imply CMD_SATA
imply PANIC_HANG
@@ -262,6 +266,8 @@ config ARCH_B4420
select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v24
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
+ select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN
+ select SYS_FSL_USB1_PHY_ENABLE
select SYS_PPC64
select FSL_IFC
imply CMD_EEPROM
@@ -293,6 +299,9 @@ config ARCH_B4860
select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v24
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
+ select SYS_FSL_SRIO_LIODN
+ select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN
+ select SYS_FSL_USB1_PHY_ENABLE
select SYS_PPC64
select FSL_IFC
imply CMD_EEPROM
@@ -405,6 +414,7 @@ config ARCH_MPC8548
select SYS_FSL_HAS_DDR2
select SYS_FSL_HAS_DDR1
select SYS_FSL_HAS_SEC
+ select SYS_FSL_RMU
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
@@ -440,6 +450,7 @@ config ARCH_P1010
select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v22
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
+ select SYS_FSL_USB1_PHY_ENABLE
select SYS_PPC_E500_USE_DEBUG_TLB
select FSL_IFC
imply CMD_EEPROM
@@ -535,6 +546,7 @@ config ARCH_P1024
select FSL_PCIE_RESET
select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
+ select SYS_FSL_RMU
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
@@ -610,6 +622,8 @@ config ARCH_P2041
select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v22
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
+ select SYS_FSL_USB1_PHY_ENABLE
+ select SYS_FSL_USB2_PHY_ENABLE
select FSL_ELBC
imply CMD_NAND
@@ -640,6 +654,8 @@ config ARCH_P3041
select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v22
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
+ select SYS_FSL_USB1_PHY_ENABLE
+ select SYS_FSL_USB2_PHY_ENABLE
select FSL_ELBC
imply CMD_NAND
imply CMD_SATA
@@ -681,6 +697,7 @@ config ARCH_P4080
select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_QORIQ_CHASSIS1
+ select SYS_FSL_RMU
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
select FSL_ELBC
@@ -711,6 +728,8 @@ config ARCH_P5040
select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v24
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
+ select SYS_FSL_USB1_PHY_ENABLE
+ select SYS_FSL_USB2_PHY_ENABLE
select SYS_PPC64
select FSL_ELBC
imply CMD_SATA
@@ -742,6 +761,9 @@ config ARCH_T1024
select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v24
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_5
+ select SYS_FSL_SINGLE_SOURCE_CLK
+ select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN
+ select SYS_FSL_USB_DUAL_PHY_ENABLE
select FSL_IFC
imply CMD_EEPROM
imply CMD_NAND
@@ -770,6 +792,9 @@ config ARCH_T1040
select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v24
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_5
+ select SYS_FSL_SINGLE_SOURCE_CLK
+ select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN
+ select SYS_FSL_USB_DUAL_PHY_ENABLE
select FSL_IFC
imply CMD_MTDPARTS
imply CMD_NAND
@@ -797,6 +822,9 @@ config ARCH_T1042
select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v24
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_5
+ select SYS_FSL_SINGLE_SOURCE_CLK
+ select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN
+ select SYS_FSL_USB_DUAL_PHY_ENABLE
select FSL_IFC
imply CMD_MTDPARTS
imply CMD_NAND
@@ -826,6 +854,9 @@ config ARCH_T2080
select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v30
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
+ select SYS_FSL_SRIO_LIODN
+ select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN
+ select SYS_FSL_USB_DUAL_PHY_ENABLE
select SYS_PPC64
select FSL_IFC
imply CMD_SATA
@@ -859,6 +890,9 @@ config ARCH_T4240
select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v30
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
+ select SYS_FSL_SRIO_LIODN
+ select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN
+ select SYS_FSL_USB_DUAL_PHY_ENABLE
select SYS_PPC64
select FSL_IFC
imply CMD_SATA
@@ -1147,6 +1181,12 @@ config FSL_PCIE_DISABLE_ASPM
config FSL_PCIE_RESET
bool
+config SYS_FSL_RAID_ENGINE
+ bool
+
+config SYS_FSL_RMU
+ bool
+
config SYS_FSL_QORIQ_CHASSIS1
bool
@@ -1312,6 +1352,9 @@ config FSL_CORENET
bool
select SYS_FSL_CPC
+config FSL_NGPIXIS
+ bool
+
config SYS_CPC_REINIT_F
bool
help
@@ -1347,6 +1390,33 @@ config SYS_FSL_PCIE_COMPAT
Defines the string to utilize when trying to match PCIe device tree
nodes for the given platform.
+config SYS_FSL_SINGLE_SOURCE_CLK
+ bool
+
+config SYS_FSL_SRIO_LIODN
+ bool
+
+config SYS_FSL_TBCLK_DIV
+ int
+ default 32 if ARCH_P2041 || ARCH_P3041
+ default 16 if ARCH_P4080 || ARCH_P5040 || ARCH_T4240 || ARCH_B4860 || \
+ ARCH_B4420 || ARCH_T1040 || ARCH_T1042 || \
+ ARCH_T1024 || ARCH_T2080
+ default 8
+ help
+ Defines the core time base clock divider ratio compared to the system
+ clock. On most PQ3 devices this is 8, on newer QorIQ devices it can
+ be 16 or 32. The ratio varies from SoC to Soc.
+
+config SYS_FSL_USB1_PHY_ENABLE
+ bool
+
+config SYS_FSL_USB2_PHY_ENABLE
+ bool
+
+config SYS_FSL_USB_DUAL_PHY_ENABLE
+ bool
+
config SYS_MPC85XX_NO_RESETVEC
bool "Discard resetvec section and move bootpg section up"
depends on MPC85xx
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index ffa8b602426..1b6cdc4df02 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -334,9 +334,6 @@ int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
/*
* Get timebase clock frequency
*/
-#ifndef CONFIG_SYS_FSL_TBCLK_DIV
-#define CONFIG_SYS_FSL_TBCLK_DIV 8
-#endif
__weak unsigned long get_tbclk(void)
{
unsigned long tbclk_div = CONFIG_SYS_FSL_TBCLK_DIV;
diff --git a/arch/powerpc/cpu/mpc85xx/spl_minimal.c b/arch/powerpc/cpu/mpc85xx/spl_minimal.c
index 21b35db08df..bdd73389d90 100644
--- a/arch/powerpc/cpu/mpc85xx/spl_minimal.c
+++ b/arch/powerpc/cpu/mpc85xx/spl_minimal.c
@@ -31,10 +31,6 @@ ulong cpu_init_f(void)
return 0;
}
-#ifndef CONFIG_SYS_FSL_TBCLK_DIV
-#define CONFIG_SYS_FSL_TBCLK_DIV 8
-#endif
-
void udelay(unsigned long usec)
{
u32 ticks_per_usec = gd->bus_clk / (CONFIG_SYS_FSL_TBCLK_DIV * 1000000);
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index f972bee7470..d3d4e9c053f 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -20,15 +20,12 @@
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
-#define CONFIG_SYS_FSL_RMU
#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
#elif defined(CONFIG_ARCH_P1010)
#define CONFIG_FSL_SDHC_V2_3
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
-#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
/* P1011 is single core version of P1020 */
#elif defined(CONFIG_ARCH_P1011)
@@ -65,7 +62,6 @@
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
-#define CONFIG_SYS_FSL_RMU
#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
#elif defined(CONFIG_ARCH_P2041) /* also supports P2040 */
@@ -73,10 +69,6 @@
#define CONFIG_SYS_NUM_FM1_DTSEC 5
#define CONFIG_SYS_NUM_FM1_10GEC 1
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
-#define CONFIG_SYS_FSL_TBCLK_DIV 32
-#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
@@ -87,10 +79,6 @@
#define CONFIG_SYS_NUM_FM1_DTSEC 5
#define CONFIG_SYS_NUM_FM1_10GEC 1
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
-#define CONFIG_SYS_FSL_TBCLK_DIV 32
-#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
@@ -103,11 +91,9 @@
#define CONFIG_SYS_NUM_FM1_10GEC 1
#define CONFIG_SYS_NUM_FM2_10GEC 1
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
-#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
-#define CONFIG_SYS_FSL_RMU
#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000
@@ -118,10 +104,6 @@
#define CONFIG_SYS_NUM_FM2_DTSEC 5
#define CONFIG_SYS_NUM_FM2_10GEC 1
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
-#define CONFIG_SYS_FSL_TBCLK_DIV 16
-#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
#elif defined(CONFIG_ARCH_BSC9131)
@@ -135,7 +117,6 @@
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 3
#elif defined(CONFIG_ARCH_T4240)
-#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
#ifdef CONFIG_ARCH_T4240
#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 4 }
#define CONFIG_SYS_NUM_FM1_DTSEC 8
@@ -158,24 +139,17 @@
#define CONFIG_SYS_FM1_CLK 3
#define CONFIG_SYS_FM2_CLK 3
#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
-#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
-#define CONFIG_SYS_FSL_SRIO_LIODN
-#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#elif defined(CONFIG_ARCH_B4860) || defined(CONFIG_ARCH_B4420)
-#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
#define CONFIG_SYS_FSL_SRDS_1
#define CONFIG_SYS_FSL_SRDS_2
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_FM1_CLK 0
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4
#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
-#define CONFIG_SYS_FSL_TBCLK_DIV 16
-#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#ifdef CONFIG_ARCH_B4860
#define CONFIG_MAX_DSP_CPUS 12
@@ -186,7 +160,6 @@
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
-#define CONFIG_SYS_FSL_SRIO_LIODN
#else
#define CONFIG_MAX_DSP_CPUS 2
#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 4 }
@@ -195,7 +168,6 @@
#endif
#elif defined(CONFIG_ARCH_T1040) || defined(CONFIG_ARCH_T1042)
-#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 1, 1 }
#define CONFIG_SYS_FSL_SRDS_1
#define CONFIG_SYS_NUM_FMAN 1
@@ -206,17 +178,12 @@
#define CONFIG_FM_PLAT_CLK_DIV 1
#define CONFIG_SYS_FM1_CLK CONFIG_FM_PLAT_CLK_DIV
#define CONFIG_SYS_FM_MURAM_SIZE 0x30000
-#define CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
-#define CONFIG_SYS_FSL_TBCLK_DIV 16
-#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
#define QE_MURAM_SIZE 0x6000UL
#define MAX_QE_RISC 1
#define QE_NUM_OF_SNUM 28
#elif defined(CONFIG_ARCH_T1024)
-#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
#define CONFIG_SYS_FSL_NUM_CC_PLL 2
#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 1, 1 }
#define CONFIG_SYS_FSL_SRDS_1
@@ -228,17 +195,12 @@
#define CONFIG_SYS_FM1_CLK 0
#define CONFIG_QBMAN_CLK_DIV 1
#define CONFIG_SYS_FM_MURAM_SIZE 0x30000
-#define CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
-#define CONFIG_SYS_FSL_TBCLK_DIV 16
-#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
#define QE_MURAM_SIZE 0x6000UL
#define MAX_QE_RISC 1
#define QE_NUM_OF_SNUM 28
#elif defined(CONFIG_ARCH_T2080)
-#define CONFIG_SYS_FSL_QMAN_V3
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 4, 4, 4 }
#define CONFIG_SYS_FSL_SRDS_1
@@ -246,7 +208,6 @@
#define CONFIG_SYS_NUM_FM1_DTSEC 8
#define CONFIG_SYS_NUM_FM1_10GEC 4
#define CONFIG_SYS_FSL_SRDS_2
-#define CONFIG_SYS_FSL_SRIO_LIODN
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
@@ -256,9 +217,6 @@
#define CONFIG_SYS_FM1_CLK 0
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
-#define CONFIG_SYS_FSL_TBCLK_DIV 16
-#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE