diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/Kconfig | 6 | ||||
-rw-r--r-- | arch/arm/cpu/arm926ejs/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/cpu/arm926ejs/armada100/Makefile | 7 | ||||
-rw-r--r-- | arch/arm/cpu/arm926ejs/armada100/cpu.c | 93 | ||||
-rw-r--r-- | arch/arm/cpu/arm926ejs/armada100/dram.c | 117 | ||||
-rw-r--r-- | arch/arm/cpu/arm926ejs/armada100/timer.c | 198 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-armada100/armada100.h | 59 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-armada100/config.h | 27 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-armada100/cpu.h | 161 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-armada100/gpio.h | 31 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-armada100/mfp.h | 79 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-armada100/spi.h | 78 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-armada100/utmi-armada100.h | 62 |
13 files changed, 0 insertions, 919 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1b1767d7ba4..6675a633f85 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -551,11 +551,6 @@ config ARCH_AT91 select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB select SPL_SEPARATE_BSS if SPL -config TARGET_ASPENITE - bool "Support aspenite" - select CPU_ARM926EJS - select GPIO_EXTRA_HEADER - config ARCH_DAVINCI bool "TI DaVinci" select CPU_ARM926EJS @@ -2144,7 +2139,6 @@ source "board/armltd/total_compute/Kconfig" source "board/bosch/shc/Kconfig" source "board/bosch/guardian/Kconfig" -source "board/Marvell/aspenite/Kconfig" source "board/Marvell/octeontx/Kconfig" source "board/Marvell/octeontx2/Kconfig" source "board/armltd/vexpress/Kconfig" diff --git a/arch/arm/cpu/arm926ejs/Makefile b/arch/arm/cpu/arm926ejs/Makefile index 98aafe805a2..a6b29af8f4c 100644 --- a/arch/arm/cpu/arm926ejs/Makefile +++ b/arch/arm/cpu/arm926ejs/Makefile @@ -12,7 +12,6 @@ extra-y := endif endif -obj-$(CONFIG_ARMADA100) += armada100/ obj-$(CONFIG_MX25) += mx25/ obj-$(CONFIG_MX27) += mx27/ obj-$(if $(filter mxs,$(SOC)),y) += mxs/ diff --git a/arch/arm/cpu/arm926ejs/armada100/Makefile b/arch/arm/cpu/arm926ejs/armada100/Makefile deleted file mode 100644 index 77ac0e2624a..00000000000 --- a/arch/arm/cpu/arm926ejs/armada100/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2010 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <prafulla@marvell.com> - -obj-y = cpu.o timer.o dram.o diff --git a/arch/arm/cpu/arm926ejs/armada100/cpu.c b/arch/arm/cpu/arm926ejs/armada100/cpu.c deleted file mode 100644 index 96726b3144e..00000000000 --- a/arch/arm/cpu/arm926ejs/armada100/cpu.c +++ /dev/null @@ -1,93 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2010 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * Contributor: Mahavir Jain <mjain@marvell.com> - */ - -#include <common.h> -#include <cpu_func.h> -#include <init.h> -#include <asm/arch/cpu.h> -#include <asm/arch/armada100.h> - -#define UARTCLK14745KHZ (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1)) -#define SET_MRVL_ID (1<<8) -#define L2C_RAM_SEL (1<<4) - -int arch_cpu_init(void) -{ - u32 val; - struct armd1cpu_registers *cpuregs = - (struct armd1cpu_registers *) ARMD1_CPU_BASE; - - struct armd1apb1_registers *apb1clkres = - (struct armd1apb1_registers *) ARMD1_APBC1_BASE; - - struct armd1mpmu_registers *mpmu = - (struct armd1mpmu_registers *) ARMD1_MPMU_BASE; - - /* set SEL_MRVL_ID bit in ARMADA100_CPU_CONF register */ - val = readl(&cpuregs->cpu_conf); - val = val | SET_MRVL_ID; - writel(val, &cpuregs->cpu_conf); - - /* Enable Clocks for all hardware units */ - writel(0xFFFFFFFF, &mpmu->acgr); - - /* Turn on AIB and AIB-APB Functional clock */ - writel(APBC_APBCLK | APBC_FNCLK, &apb1clkres->aib); - - /* ensure L2 cache is not mapped as SRAM */ - val = readl(&cpuregs->cpu_conf); - val = val & ~(L2C_RAM_SEL); - writel(val, &cpuregs->cpu_conf); - - /* Enable GPIO clock */ - writel(APBC_APBCLK, &apb1clkres->gpio); - -#ifdef CONFIG_I2C_MV - /* Enable general I2C clock */ - writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0); - writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0); - - /* Enable power I2C clock */ - writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1); - writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1); -#endif - - /* - * Enable Functional and APB clock at 14.7456MHz - * for configured UART console - */ -#if (CONFIG_SYS_NS16550_COM1 == ARMD1_UART3_BASE) - writel(UARTCLK14745KHZ, &apb1clkres->uart3); -#elif (CONFIG_SYS_NS16550_COM1 == ARMD1_UART2_BASE) - writel(UARTCLK14745KHZ, &apb1clkres->uart2); -#else - writel(UARTCLK14745KHZ, &apb1clkres->uart1); -#endif - icache_enable(); - - return 0; -} - -#if defined(CONFIG_DISPLAY_CPUINFO) -int print_cpuinfo(void) -{ - u32 id; - struct armd1cpu_registers *cpuregs = - (struct armd1cpu_registers *) ARMD1_CPU_BASE; - - id = readl(&cpuregs->chip_id); - printf("SoC: Armada 88AP%X-%X\n", (id & 0xFFF), (id >> 0x10)); - return 0; -} -#endif - -#ifdef CONFIG_I2C_MV -void i2c_clk_enable(void) -{ -} -#endif diff --git a/arch/arm/cpu/arm926ejs/armada100/dram.c b/arch/arm/cpu/arm926ejs/armada100/dram.c deleted file mode 100644 index c97b5b1940a..00000000000 --- a/arch/arm/cpu/arm926ejs/armada100/dram.c +++ /dev/null @@ -1,117 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2010 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com>, - * Contributor: Mahavir Jain <mjain@marvell.com> - */ - -#include <common.h> -#include <init.h> -#include <asm/global_data.h> -#include <asm/io.h> -#include <asm/arch/armada100.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * ARMADA100 DRAM controller supports upto 8 banks - * for chip select 0 and 1 - */ - -/* - * DDR Memory Control Registers - * Refer Datasheet Appendix A.17 - */ -struct armd1ddr_map_registers { - u32 cs; /* Memory Address Map Register -CS */ - u32 pad[3]; -}; - -struct armd1ddr_registers { - u8 pad[0x100 - 0x000]; - struct armd1ddr_map_registers mmap[2]; -}; - -/* - * armd1_sdram_base - reads SDRAM Base Address Register - */ -u32 armd1_sdram_base(int chip_sel) -{ - struct armd1ddr_registers *ddr_regs = - (struct armd1ddr_registers *)ARMD1_DRAM_BASE; - u32 result = 0; - u32 CS_valid = 0x01 & readl(&ddr_regs->mmap[chip_sel].cs); - - if (!CS_valid) - return 0; - - result = readl(&ddr_regs->mmap[chip_sel].cs) & 0xFF800000; - return result; -} - -/* - * armd1_sdram_size - reads SDRAM size - */ -u32 armd1_sdram_size(int chip_sel) -{ - struct armd1ddr_registers *ddr_regs = - (struct armd1ddr_registers *)ARMD1_DRAM_BASE; - u32 result = 0; - u32 CS_valid = 0x01 & readl(&ddr_regs->mmap[chip_sel].cs); - - if (!CS_valid) - return 0; - - result = readl(&ddr_regs->mmap[chip_sel].cs); - result = (result >> 16) & 0xF; - if (result < 0x7) { - printf("Unknown DRAM Size\n"); - return -1; - } else { - return ((0x8 << (result - 0x7)) * 1024 * 1024); - } -} - -int dram_init(void) -{ - int i; - - gd->ram_size = 0; - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - gd->bd->bi_dram[i].start = armd1_sdram_base(i); - gd->bd->bi_dram[i].size = armd1_sdram_size(i); - /* - * It is assumed that all memory banks are consecutive - * and without gaps. - * If the gap is found, ram_size will be reported for - * consecutive memory only - */ - if (gd->bd->bi_dram[i].start != gd->ram_size) - break; - - gd->ram_size += gd->bd->bi_dram[i].size; - - } - - for (; i < CONFIG_NR_DRAM_BANKS; i++) { - /* If above loop terminated prematurely, we need to set - * remaining banks' start address & size as 0. Otherwise other - * u-boot functions and Linux kernel gets wrong values which - * could result in crash */ - gd->bd->bi_dram[i].start = 0; - gd->bd->bi_dram[i].size = 0; - } - return 0; -} - -/* - * If this function is not defined here, - * board.c alters dram bank zero configuration defined above. - */ -int dram_init_banksize(void) -{ - dram_init(); - - return 0; -} diff --git a/arch/arm/cpu/arm926ejs/armada100/timer.c b/arch/arm/cpu/arm926ejs/armada100/timer.c deleted file mode 100644 index 4b96d4aa918..00000000000 --- a/arch/arm/cpu/arm926ejs/armada100/timer.c +++ /dev/null @@ -1,198 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2010 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * Contributor: Mahavir Jain <mjain@marvell.com> - */ - -#include <common.h> -#include <cpu_func.h> -#include <init.h> -#include <time.h> -#include <asm/arch/cpu.h> -#include <asm/arch/armada100.h> -#include <asm/global_data.h> -#include <linux/delay.h> - -/* - * Timer registers - * Refer Section A.6 in Datasheet - */ -struct armd1tmr_registers { - u32 clk_ctrl; /* Timer clk control reg */ - u32 match[9]; /* Timer match registers */ - u32 count[3]; /* Timer count registers */ - u32 status[3]; - u32 ie[3]; - u32 preload[3]; /* Timer preload value */ - u32 preload_ctrl[3]; - u32 wdt_match_en; - u32 wdt_match_r; - u32 wdt_val; - u32 wdt_sts; - u32 icr[3]; - u32 wdt_icr; - u32 cer; /* Timer count enable reg */ - u32 cmr; - u32 ilr[3]; - u32 wcr; - u32 wfar; - u32 wsar; - u32 cvwr; -}; - -#define TIMER 0 /* Use TIMER 0 */ -/* Each timer has 3 match registers */ -#define MATCH_CMP(x) ((3 * TIMER) + x) -#define TIMER_LOAD_VAL 0xffffffff -#define COUNT_RD_REQ 0x1 - -DECLARE_GLOBAL_DATA_PTR; -/* Using gd->arch.tbu from timestamp and gd->arch.tbl for lastdec */ - -/* For preventing risk of instability in reading counter value, - * first set read request to register cvwr and then read same - * register after it captures counter value. - */ -ulong read_timer(void) -{ - struct armd1tmr_registers *armd1timers = - (struct armd1tmr_registers *) ARMD1_TIMER_BASE; - volatile int loop=100; - - writel(COUNT_RD_REQ, &armd1timers->cvwr); - while (loop--); - return(readl(&armd1timers->cvwr)); -} - -static ulong get_timer_masked(void) -{ - ulong now = read_timer(); - - if (now >= gd->arch.tbl) { - /* normal mode */ - gd->arch.tbu += now - gd->arch.tbl; - } else { - /* we have an overflow ... */ - gd->arch.tbu += now + TIMER_LOAD_VAL - gd->arch.tbl; - } - gd->arch.tbl = now; - - return gd->arch.tbu; -} - -ulong get_timer(ulong base) -{ - return ((get_timer_masked() / (CONFIG_SYS_HZ_CLOCK / 1000)) - - base); -} - -void __udelay(unsigned long usec) -{ - ulong delayticks; - ulong endtime; - - delayticks = (usec * (CONFIG_SYS_HZ_CLOCK / 1000000)); - endtime = get_timer_masked() + delayticks; - - while (get_timer_masked() < endtime); -} - -/* - * init the Timer - */ -int timer_init(void) -{ - struct armd1apb1_registers *apb1clkres = - (struct armd1apb1_registers *) ARMD1_APBC1_BASE; - struct armd1tmr_registers *armd1timers = - (struct armd1tmr_registers *) ARMD1_TIMER_BASE; - - /* Enable Timer clock at 3.25 MHZ */ - writel(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3), &apb1clkres->timers); - - /* load value into timer */ - writel(0x0, &armd1timers->clk_ctrl); - /* Use Timer 0 Match Resiger 0 */ - writel(TIMER_LOAD_VAL, &armd1timers->match[MATCH_CMP(0)]); - /* Preload value is 0 */ - writel(0x0, &armd1timers->preload[TIMER]); - /* Enable match comparator 0 for Timer 0 */ - writel(0x1, &armd1timers->preload_ctrl[TIMER]); - - /* Enable timer 0 */ - writel(0x1, &armd1timers->cer); - /* init the gd->arch.tbu and gd->arch.tbl value */ - gd->arch.tbl = read_timer(); - gd->arch.tbu = 0; - - return 0; -} - -#define MPMU_APRR_WDTR (1<<4) -#define TMR_WFAR 0xbaba /* WDT Register First key */ -#define TMP_WSAR 0xeb10 /* WDT Register Second key */ - -/* - * This function uses internal Watchdog Timer - * based reset mechanism. - * Steps to write watchdog registers (protected access) - * 1. Write key value to TMR_WFAR reg. - * 2. Write key value to TMP_WSAR reg. - * 3. Perform write operation. - */ -void reset_cpu(void) -{ - struct armd1mpmu_registers *mpmu = - (struct armd1mpmu_registers *) ARMD1_MPMU_BASE; - struct armd1tmr_registers *armd1timers = - (struct armd1tmr_registers *) ARMD1_TIMER_BASE; - u32 val; - - /* negate hardware reset to the WDT after system reset */ - val = readl(&mpmu->aprr); - val = val | MPMU_APRR_WDTR; - writel(val, &mpmu->aprr); - - /* reset/enable WDT clock */ - writel(APBC_APBCLK | APBC_FNCLK | APBC_RST, &mpmu->wdtpcr); - readl(&mpmu->wdtpcr); - writel(APBC_APBCLK | APBC_FNCLK, &mpmu->wdtpcr); - readl(&mpmu->wdtpcr); - - /* clear previous WDT status */ - writel(TMR_WFAR, &armd1timers->wfar); - writel(TMP_WSAR, &armd1timers->wsar); - writel(0, &armd1timers->wdt_sts); - - /* set match counter */ - writel(TMR_WFAR, &armd1timers->wfar); - writel(TMP_WSAR, &armd1timers->wsar); - writel(0xf, &armd1timers->wdt_match_r); - - /* enable WDT reset */ - writel(TMR_WFAR, &armd1timers->wfar); - writel(TMP_WSAR, &armd1timers->wsar); - writel(0x3, &armd1timers->wdt_match_en); - - while(1); -} - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On ARM it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - return get_timer(0); -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - return (ulong)CONFIG_SYS_HZ; -} diff --git a/arch/arm/include/asm/arch-armada100/armada100.h b/arch/arm/include/asm/arch-armada100/armada100.h deleted file mode 100644 index dd21ad3c605..00000000000 --- a/arch/arm/include/asm/arch-armada100/armada100.h +++ /dev/null @@ -1,59 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2010 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * Contributor: Mahavir Jain <mjain@marvell.com> - */ - -#ifndef _ASM_ARCH_ARMADA100_H -#define _ASM_ARCH_ARMADA100_H - -#if defined (CONFIG_ARMADA100) - -/* Common APB clock register bit definitions */ -#define APBC_APBCLK (1<<0) /* APB Bus Clock Enable */ -#define APBC_FNCLK (1<<1) /* Functional Clock Enable */ -#define APBC_RST (1<<2) /* Reset Generation */ -/* Functional Clock Selection Mask */ -#define APBC_FNCLKSEL(x) (((x) & 0xf) << 4) - -/* Fast Ethernet Controller Clock register definition */ -#define FE_CLK_RST 0x1 -#define FE_CLK_ENA 0x8 - -/* SSP2 Clock Control */ -#define SSP2_APBCLK 0x01 -#define SSP2_FNCLK 0x02 - -/* USB Clock/reset control bits */ -#define USB_SPH_AXICLK_EN 0x10 -#define USB_SPH_AXI_RST 0x02 - -/* MPMU Clocks */ -#define APB2_26M_EN (1 << 20) -#define AP_26M (1 << 4) - -/* Register Base Addresses */ -#define ARMD1_DRAM_BASE 0xB0000000 -#define ARMD1_FEC_BASE 0xC0800000 -#define ARMD1_TIMER_BASE 0xD4014000 -#define ARMD1_APBC1_BASE 0xD4015000 -#define ARMD1_APBC2_BASE 0xD4015800 -#define ARMD1_UART1_BASE 0xD4017000 -#define ARMD1_UART2_BASE 0xD4018000 -#define ARMD1_GPIO_BASE 0xD4019000 -#define ARMD1_SSP1_BASE 0xD401B000 -#define ARMD1_SSP2_BASE 0xD401C000 -#define ARMD1_MFPR_BASE 0xD401E000 -#define ARMD1_SSP3_BASE 0xD401F000 -#define ARMD1_SSP4_BASE 0xD4020000 -#define ARMD1_SSP5_BASE 0xD4021000 -#define ARMD1_UART3_BASE 0xD4026000 -#define ARMD1_MPMU_BASE 0xD4050000 -#define ARMD1_USB_HOST_BASE 0xD4209000 -#define ARMD1_APMU_BASE 0xD4282800 -#define ARMD1_CPU_BASE 0xD4282C00 - -#endif /* CONFIG_ARMADA100 */ -#endif /* _ASM_ARCH_ARMADA100_H */ diff --git a/arch/arm/include/asm/arch-armada100/config.h b/arch/arm/include/asm/arch-armada100/config.h deleted file mode 100644 index 2862dd072b9..00000000000 --- a/arch/arm/include/asm/arch-armada100/config.h +++ /dev/null @@ -1,27 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2011 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Lei Wen <leiwen@marvell.com> - */ - -/* - * This file should be included in board config header file. - * - * It supports common definitions for Armada100 platform - */ - -#ifndef _ARMD1_CONFIG_H -#define _ARMD1_CONFIG_H - -#include <asm/arch/armada100.h> - -#define CONFIG_SYS_TCLK (14745600) /* NS16550 clk config */ -#define CONFIG_SYS_HZ_CLOCK (3250000) /* Timer Freq. 3.25MHZ */ -#define CONFIG_MARVELL_MFP /* Enable mvmfp driver */ -#define MV_MFPR_BASE ARMD1_MFPR_BASE -#define MV_UART_CONSOLE_BASE ARMD1_UART1_BASE -#define CONFIG_SYS_NS16550_IER (1 << 6) /* Bit 6 in UART_IER register - represents UART Unit Enable */ - -#endif /* _ARMD1_CONFIG_H */ diff --git a/arch/arm/include/asm/arch-armada100/cpu.h b/arch/arm/include/asm/arch-armada100/cpu.h deleted file mode 100644 index cd5e5051d51..00000000000 --- a/arch/arm/include/asm/arch-armada100/cpu.h +++ /dev/null @@ -1,161 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2010 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com>, Contributor: Mahavir Jain <mjain@marvell.com> - */ - -#ifndef _ARMADA100CPU_H -#define _ARMADA100CPU_H - -#include <asm/io.h> -#include <asm/system.h> - -/* - * Main Power Management (MPMU) Registers - * Refer Datasheet Appendix A.8 - */ -struct armd1mpmu_registers { - u8 pad0[0x08 - 0x00]; - u32 fccr; /*0x0008*/ - u32 pocr; /*0x000c*/ - u32 posr; /*0x0010*/ - u32 succr; /*0x0014*/ - u8 pad1[0x030 - 0x014 - 4]; - u32 gpcr; /*0x0030*/ - u8 pad2[0x200 - 0x030 - 4]; - u32 wdtpcr; /*0x0200*/ - u8 pad3[0x1000 - 0x200 - 4]; - u32 apcr; /*0x1000*/ - u32 apsr; /*0x1004*/ - u8 pad4[0x1020 - 0x1004 - 4]; - u32 aprr; /*0x1020*/ - u32 acgr; /*0x1024*/ - u32 arsr; /*0x1028*/ -}; - -/* - * Application Subsystem Power Management - * Refer Datasheet Appendix A.9 - */ -struct armd1apmu_registers { - u32 pcr; /* 0x000 */ - u32 ccr; /* 0x004 */ - u32 pad1; - u32 ccsr; /* 0x00C */ - u32 fc_timer; /* 0x010 */ - u32 pad2; - u32 ideal_cfg; /* 0x018 */ - u8 pad3[0x04C - 0x018 - 4]; - u32 lcdcrc; /* 0x04C */ - u32 cciccrc; /* 0x050 */ - u32 sd1crc; /* 0x054 */ - u32 sd2crc; /* 0x058 */ - u32 usbcrc; /* 0x05C */ - u32 nfccrc; /* 0x060 */ - u32 dmacrc; /* 0x064 */ - u32 pad4; - u32 buscrc; /* 0x06C */ - u8 pad5[0x07C - 0x06C - 4]; - u32 wake_clr; /* 0x07C */ - u8 pad6[0x090 - 0x07C - 4]; - u32 core_status; /* 0x090 */ - u32 rfsc; /* 0x094 */ - u32 imr; /* 0x098 */ - u32 irwc; /* 0x09C */ - u32 isr; /* 0x0A0 */ - u8 pad7[0x0B0 - 0x0A0 - 4]; - u32 mhst; /* 0x0B0 */ - u32 msr; /* 0x0B4 */ - u8 pad8[0x0C0 - 0x0B4 - 4]; - u32 msst; /* 0x0C0 */ - u32 pllss; /* 0x0C4 */ - u32 smb; /* 0x0C8 */ - u32 gccrc; /* 0x0CC */ - u8 pad9[0x0D4 - 0x0CC - 4]; - u32 smccrc; /* 0x0D4 */ - u32 pad10; - u32 xdcrc; /* 0x0DC */ - u32 sd3crc; /* 0x0E0 */ - u32 sd4crc; /* 0x0E4 */ - u8 pad11[0x0F0 - 0x0E4 - 4]; - u32 cfcrc; /* 0x0F0 */ - u32 mspcrc; /* 0x0F4 */ - u32 cmucrc; /* 0x0F8 */ - u32 fecrc; /* 0x0FC */ - u32 pciecrc; /* 0x100 */ - u32 epdcrc; /* 0x104 */ -}; - -/* - * APB1 Clock Reset/Control Registers - * Refer Datasheet Appendix A.10 - */ -struct armd1apb1_registers { - u32 uart1; /*0x000*/ - u32 uart2; /*0x004*/ - u32 gpio; /*0x008*/ - u32 pwm1; /*0x00c*/ - u32 pwm2; /*0x010*/ - u32 pwm3; /*0x014*/ - u32 pwm4; /*0x018*/ - u8 pad0[0x028 - 0x018 - 4]; - u32 rtc; /*0x028*/ - u32 twsi0; /*0x02c*/ - u32 kpc; /*0x030*/ - u32 timers; /*0x034*/ - u8 pad1[0x03c - 0x034 - 4]; - u32 aib; /*0x03c*/ - u32 sw_jtag; /*0x040*/ - u32 timer1; /*0x044*/ - u32 onewire; /*0x048*/ - u8 pad2[0x050 - 0x048 - 4]; - u32 asfar; /*0x050 AIB Secure First Access Reg*/ - u32 assar; /*0x054 AIB Secure Second Access Reg*/ - u8 pad3[0x06c - 0x054 - 4]; - u32 twsi1; /*0x06c*/ - u32 uart3; /*0x070*/ - u8 pad4[0x07c - 0x070 - 4]; - u32 timer2; /*0x07C*/ - u8 pad5[0x084 - 0x07c - 4]; - u32 ac97; /*0x084*/ -}; - -/* -* APB2 Clock Reset/Control Registers -* Refer Datasheet Appendix A.11 -*/ -struct armd1apb2_registers { - u32 pad1[0x01C - 0x000]; - u32 ssp1_clkrst; /* 0x01C */ - u32 ssp2_clkrst; /* 0x020 */ - u32 pad2[0x04C - 0x020 - 4]; - u32 ssp3_clkrst; /* 0x04C */ - u32 pad3[0x058 - 0x04C - 4]; - u32 ssp4_clkrst; /* 0x058 */ - u32 ssp5_clkrst; /* 0x05C */ -}; - -/* - * CPU Interface Registers - * Refer Datasheet Appendix A.2 - */ -struct armd1cpu_registers { - u32 chip_id; /* Chip Id Reg */ - u32 pad; - u32 cpu_conf; /* CPU Conf Reg */ - u32 pad1; - u32 cpu_sram_spd; /* CPU SRAM Speed Reg */ - u32 pad2; - u32 cpu_l2c_spd; /* CPU L2cache Speed Conf */ - u32 mcb_conf; /* MCB Conf Reg */ - u32 sys_boot_ctl; /* Sytem Boot Control */ -}; - -/* - * Functions - */ -u32 armd1_sdram_base(int); -u32 armd1_sdram_size(int); - -#endif /* _ARMADA100CPU_H */ diff --git a/arch/arm/include/asm/arch-armada100/gpio.h b/arch/arm/include/asm/arch-armada100/gpio.h deleted file mode 100644 index b85f6a53d98..00000000000 --- a/arch/arm/include/asm/arch-armada100/gpio.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2011 - * eInfochips Ltd. <www.einfochips.com> - * Written-by: Ajay Bhargav <contact@8051projects.net> - * - * (C) Copyright 2010 - * Marvell Semiconductor <www.marvell.com> - */ - -#ifndef _ASM_ARCH_GPIO_H -#define _ASM_ARCH_GPIO_H - -#include <asm/types.h> -#include <asm/arch/armada100.h> - -#define GPIO_HIGH 1 -#define GPIO_LOW 0 - -#define GPIO_TO_REG(gp) (gp >> 5) -#define GPIO_TO_BIT(gp) (1 << (gp & 0x1F)) -#define GPIO_VAL(gp, val) ((val >> (gp & 0x1F)) & 0x01) - -static inline void *get_gpio_base(int bank) -{ - const unsigned int offset[4] = {0, 4, 8, 0x100}; - /* gpio register bank offset - refer Appendix A.36 */ - return (struct gpio_reg *)(ARMD1_GPIO_BASE + offset[bank]); -} - -#endif /* _ASM_ARCH_GPIO_H */ diff --git a/arch/arm/include/asm/arch-armada100/mfp.h b/arch/arm/include/asm/arch-armada100/mfp.h deleted file mode 100644 index cd837eaef45..00000000000 --- a/arch/arm/include/asm/arch-armada100/mfp.h +++ /dev/null @@ -1,79 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Based on linux/arch/arm/mach-mpp/include/mfp-pxa168.h - * (C) Copyright 2007 - * Marvell Semiconductor <www.marvell.com> - * 2007-08-21: eric miao <eric.miao@marvell.com> - * - * (C) Copyright 2010 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * Contributor: Mahavir Jain <mjain@marvell.com> - */ - -#ifndef __ARMADA100_MFP_H -#define __ARMADA100_MFP_H - -/* - * Frequently used MFP Configuration macros for all ARMADA100 family of SoCs - * - * offset, pull,pF, drv,dF, edge,eF ,afn,aF - */ -/* UART1 */ -#define MFP107_UART1_TXD (MFP_REG(0x01ac) | MFP_AF1 | MFP_DRIVE_FAST) -#define MFP107_UART1_RXD (MFP_REG(0x01ac) | MFP_AF2 | MFP_DRIVE_FAST) -#define MFP108_UART1_RXD (MFP_REG(0x01b0) | MFP_AF1 | MFP_DRIVE_FAST) -#define MFP108_UART1_TXD (MFP_REG(0x01b0) | MFP_AF2 | MFP_DRIVE_FAST) -#define MFP109_UART1_CTS (MFP_REG(0x01b4) | MFP_AF1 | MFP_DRIVE_MEDIUM) -#define MFP109_UART1_RTS (MFP_REG(0x01b4) | MFP_AF2 | MFP_DRIVE_MEDIUM) -#define MFP110_UART1_RTS (MFP_REG(0x01b8) | MFP_AF1 | MFP_DRIVE_MEDIUM) -#define MFP110_UART1_CTS (MFP_REG(0x01b8) | MFP_AF2 | MFP_DRIVE_MEDIUM) -#define MFP111_UART1_RI (MFP_REG(0x01bc) | MFP_AF1 | MFP_DRIVE_MEDIUM) -#define MFP111_UART1_DSR (MFP_REG(0x01bc) | MFP_AF2 | MFP_DRIVE_MEDIUM) -#define MFP112_UART1_DTR (MFP_REG(0x01c0) | MFP_AF1 | MFP_DRIVE_MEDIUM) -#define MFP112_UART1_DCD (MFP_REG(0x01c0) | MFP_AF2 | MFP_DRIVE_MEDIUM) - -/* UART2 */ -#define MFP47_UART2_RXD (MFP_REG(0x0028) | MFP_AF6 | MFP_DRIVE_MEDIUM) -#define MFP48_UART2_TXD (MFP_REG(0x002c) | MFP_AF6 | MFP_DRIVE_MEDIUM) -#define MFP88_UART2_RXD (MFP_REG(0x0160) | MFP_AF2 | MFP_DRIVE_MEDIUM) -#define MFP89_UART2_TXD (MFP_REG(0x0164) | MFP_AF2 | MFP_DRIVE_MEDIUM) - -/* UART3 */ -#define MFPO8_UART3_TXD (MFP_REG(0x06c) | MFP_AF2 | MFP_DRIVE_MEDIUM) -#define MFPO9_UART3_RXD (MFP_REG(0x070) | MFP_AF2 | MFP_DRIVE_MEDIUM) - -/* I2c */ -#define MFP105_CI2C_SDA (MFP_REG(0x1a4) | MFP_AF1 | MFP_DRIVE_MEDIUM) -#define MFP106_CI2C_SCL (MFP_REG(0x1a8) | MFP_AF1 | MFP_DRIVE_MEDIUM) - -/* Fast Ethernet */ -#define MFP086_ETH_TXCLK (MFP_REG(0x158) | MFP_AF5 | MFP_DRIVE_MEDIUM) -#define MFP087_ETH_TXEN (MFP_REG(0x15C) | MFP_AF5 | MFP_DRIVE_MEDIUM) -#define MFP088_ETH_TXDQ3 (MFP_REG(0x160) | MFP_AF5 | MFP_DRIVE_MEDIUM) -#define MFP089_ETH_TXDQ2 (MFP_REG(0x164) | MFP_AF5 | MFP_DRIVE_MEDIUM) -#define MFP090_ETH_TXDQ1 (MFP_REG(0x168) | MFP_AF5 | MFP_DRIVE_MEDIUM) -#define MFP091_ETH_TXDQ0 (MFP_REG(0x16C) | MFP_AF5 | MFP_DRIVE_MEDIUM) -#define MFP092_ETH_CRS (MFP_REG(0x170) | MFP_AF5 | MFP_DRIVE_MEDIUM) -#define MFP093_ETH_COL (MFP_REG(0x174) | MFP_AF5 | MFP_DRIVE_MEDIUM) -#define MFP094_ETH_RXCLK (MFP_REG(0x178) | MFP_AF5 | MFP_DRIVE_MEDIUM) -#define MFP095_ETH_RXER (MFP_REG(0x17C) | MFP_AF5 | MFP_DRIVE_MEDIUM) -#define MFP096_ETH_RXDQ3 (MFP_REG(0x180) | MFP_AF5 | MFP_DRIVE_MEDIUM) -#define MFP097_ETH_RXDQ2 (MFP_REG(0x184) | MFP_AF5 | MFP_DRIVE_MEDIUM) -#define MFP098_ETH_RXDQ1 (MFP_REG(0x188) | MFP_AF5 | MFP_DRIVE_MEDIUM) -#define MFP099_ETH_RXDQ0 (MFP_REG(0x18C) | MFP_AF5 | MFP_DRIVE_MEDIUM) -#define MFP100_ETH_MDC (MFP_REG(0x190) | MFP_AF5 | MFP_DRIVE_MEDIUM) -#define MFP101_ETH_MDIO (MFP_REG(0x194) | MFP_AF5 | MFP_DRIVE_MEDIUM) -#define MFP103_ETH_RXDV (MFP_REG(0x19C) | MFP_AF5 | MFP_DRIVE_MEDIUM) - -/* SPI */ -#define MFP107_SSP2_RXD (MFP_REG(0x1AC) | MFP_AF4 | MFP_DRIVE_MEDIUM) -#define MFP108_SSP2_TXD (MFP_REG(0x1B0) | MFP_AF4 | MFP_DRIVE_MEDIUM) -#define MFP110_SSP2_CS (MFP_REG(0x1B8) | MFP_AF0 | MFP_DRIVE_MEDIUM) -#define MFP111_SSP2_CLK (MFP_REG(0x1BC) | MFP_AF4 | MFP_DRIVE_MEDIUM) - -/* More macros can be defined here... */ - -#define MFP_PIN_MAX 117 - -#endif /* __ARMADA100_MFP_H */ diff --git a/arch/arm/include/asm/arch-armada100/spi.h b/arch/arm/include/asm/arch-armada100/spi.h deleted file mode 100644 index 873ba6e91c9..00000000000 --- a/arch/arm/include/asm/arch-armada100/spi.h +++ /dev/null @@ -1,78 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2011 - * eInfochips Ltd. <www.einfochips.com> - * Written-by: Ajay Bhargav <contact@8051projects.net> - * - * (C) Copyright 2010 - * Marvell Semiconductor <www.marvell.com> - */ - -#ifndef __ARMADA100_SPI_H_ -#define __ARMADA100_SPI_H_ - -#include <asm/arch/armada100.h> - -#define CAT_BASE_ADDR(x) ARMD1_SSP ## x ## _BASE -#define SSP_REG_BASE(x) CAT_BASE_ADDR(x) - -/* - * SSP Serial Port Registers - * refer Appendix A.26 - */ -struct ssp_reg { - u32 sscr0; /* SSP Control Register 0 - 0x000 */ - u32 sscr1; /* SSP Control Register 1 - 0x004 */ - u32 sssr; /* SSP Status Register - 0x008 */ - u32 ssitr; /* SSP Interrupt Test Register - 0x00C */ - u32 ssdr; /* SSP Data Register - 0x010 */ - u32 pad1[5]; - u32 ssto; /* SSP Timeout Register - 0x028 */ - u32 sspsp; /* SSP Programmable Serial Protocol Register - 0x02C */ - u32 sstsa; /* SSP TX Timeslot Active Register - 0x030 */ - u32 ssrsa; /* SSP RX Timeslot Active Register - 0x034 */ - u32 sstss; /* SSP Timeslot Status Register - 0x038 */ -}; - -#define DEFAULT_WORD_LEN 8 -#define SSP_FLUSH_NUM 0x2000 -#define RX_THRESH_DEF 8 -#define TX_THRESH_DEF 8 -#define TIMEOUT_DEF 1000 - -#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ -#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ -#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */ -#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity - setting */ -#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ -#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ -#define SSCR1_TFT 0x03c0 /* Transmit FIFO Threshold (mask) */ -#define SSCR1_RFT 0x3c00 /* Receive FIFO Threshold (mask) */ - -#define SSCR1_TXTRESH(x) ((x - 1) << 6) /* level [1..16] */ -#define SSCR1_RXTRESH(x) ((x - 1) << 10) /* level [1..16] */ -#define SSCR1_TINTE (1 << 19) /* Receiver Time-out - Interrupt enable */ - -#define SSCR0_DSS 0x0f /* Data Size Select (mask) */ -#define SSCR0_DATASIZE(x) (x - 1) /* Data Size Select [4..16] */ -#define SSCR0_FRF 0x30 /* FRame Format (mask) */ -#define SSCR0_MOTO (0x0 << 4) /* Motorola's Serial - Peripheral Interface */ -#define SSCR0_TI (0x1 << 4) /* TI's Synchronous - Serial Protocol (SSP) */ -#define SSCR0_NATIONAL (0x2 << 4) /* National Microwire */ -#define SSCR0_ECS (1 << 6) /* External clock select */ -#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port - Enable */ - -#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */ -#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */ -#define SSSR_BSY (1 << 4) /* SSP Busy */ -#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */ -#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ -#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ -#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ - -#endif /* __ARMADA100_SPI_H_ */ diff --git a/arch/arm/include/asm/arch-armada100/utmi-armada100.h b/arch/arm/include/asm/arch-armada100/utmi-armada100.h deleted file mode 100644 index 28147f42acf..00000000000 --- a/arch/arm/include/asm/arch-armada100/utmi-armada100.h +++ /dev/null @@ -1,62 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2012 - * eInfochips Ltd. <www.einfochips.com> - * Written-by: Ajay Bhargav <contact@8051projects.net> - * - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - */ - -#ifndef __UTMI_ARMADA100__ -#define __UTMI_ARMADA100__ - -#define UTMI_PHY_BASE 0xD4206000 - -/* utmi_ctrl - bits */ -#define INPKT_DELAY_SOF (1 << 28) -#define PLL_PWR_UP 2 -#define PHY_PWR_UP 1 - -/* utmi_pll - bits */ -#define PLL_FBDIV_MASK 0x00000FF0 -#define PLL_FBDIV 4 -#define PLL_REFDIV_MASK 0x0000000F -#define PLL_REFDIV 0 -#define PLL_READY 0x800000 -#define VCOCAL_START (1 << 21) - -#define N_DIVIDER 0xEE -#define M_DIVIDER 0x0B - -/* utmi_tx - bits */ -#define CK60_PHSEL 17 -#define PHSEL_VAL 0x4 -#define RCAL_START (1 << 12) - -/* - * USB PHY registers - * Refer Datasheet Appendix A.21 - */ -struct armd1usb_phy_reg { - u32 utmi_rev; /* USB PHY Revision */ - u32 utmi_ctrl; /* USB PHY Control register */ - u32 utmi_pll; /* PLL register */ - u32 utmi_tx; /* Tx register */ - u32 utmi_rx; /* Rx register */ - u32 utmi_ivref; /* IVREF register */ - u32 utmi_tst_g0; /* Test group 0 register */ - u32 utmi_tst_g1; /* Test group 1 register */ - u32 utmi_tst_g2; /* Test group 2 register */ - u32 utmi_tst_g3; /* Test group 3 register */ - u32 utmi_tst_g4; /* Test group 4 register */ - u32 utmi_tst_g5; /* Test group 5 register */ - u32 utmi_reserve; /* Reserve Register */ - u32 utmi_usb_int; /* USB interuppt register */ - u32 utmi_dbg_ctl; /* Debug control register */ - u32 utmi_otg_addon; /* OTG addon register */ -}; - -int utmi_init(void); - -#endif /* __UTMI_ARMADA100__ */ |