diff options
Diffstat (limited to 'arch')
135 files changed, 2012 insertions, 1913 deletions
diff --git a/arch/arc/dts/axs10x_mb.dtsi b/arch/arc/dts/axs10x_mb.dtsi index 33b0593438..d4ff4f7039 100644 --- a/arch/arc/dts/axs10x_mb.dtsi +++ b/arch/arc/dts/axs10x_mb.dtsi @@ -90,14 +90,15 @@ }; spi0: spi@0 { - compatible = "snps,dw-apb-ssi"; + compatible = "snps,axs10x-spi", "snps,dw-apb-ssi"; reg = <0x0 0x100>; #address-cells = <1>; #size-cells = <0>; spi-max-frequency = <4000000>; clocks = <&apbclk>; clock-names = "spi_clk"; - cs-gpio = <&cs_gpio 0>; + num-cs = <1>; + cs-gpios = <&cs_gpio 0>; spi_flash@0 { compatible = "jedec,spi-nor"; reg = <0>; diff --git a/arch/arc/dts/hsdk-common.dtsi b/arch/arc/dts/hsdk-common.dtsi index 9aa10e4b25..3fc82e57d7 100644 --- a/arch/arc/dts/hsdk-common.dtsi +++ b/arch/arc/dts/hsdk-common.dtsi @@ -128,14 +128,15 @@ }; spi0: spi@f0020000 { - compatible = "snps,dw-apb-ssi"; + compatible = "snps,hsdk-spi", "snps,dw-apb-ssi"; reg = <0xf0020000 0x1000>; #address-cells = <1>; #size-cells = <0>; spi-max-frequency = <4000000>; clocks = <&cgu_clk CLK_SYS_SPI_REF>; clock-names = "spi_clk"; - cs-gpio = <&cs_gpio 0>; + num-cs = <1>; + cs-gpios = <&cs_gpio 0>; spi_flash@0 { compatible = "jedec,spi-nor"; reg = <0>; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5903c09370..fbe90875ae 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1326,6 +1326,18 @@ config TARGET_LX2160AQDS is a high-performance development platform that supports the QorIQ LX2160A/LX2120A/LX2080A Layerscape Architecture processor. +config TARGET_LX2162AQDS + bool "Support lx2162aqds" + select ARCH_LX2162A + select ARCH_MISC_INIT + select ARM64 + select ARMV8_MULTIENTRY + select ARCH_SUPPORT_TFABOOT + select BOARD_LATE_INIT + help + Support for NXP LX2162AQDS platform. + The lx2162aqds support is based on LX2160A Layerscape Architecture processor. + config TARGET_HIKEY bool "Support HiKey 96boards Consumer Edition Platform" select ARM64 diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig index 937989b278..747059b56a 100644 --- a/arch/arm/cpu/armv7/ls102xa/Kconfig +++ b/arch/arm/cpu/armv7/ls102xa/Kconfig @@ -5,11 +5,11 @@ config ARCH_LS1021A select SYS_FSL_ERRATUM_A008378 select SYS_FSL_ERRATUM_A008407 select SYS_FSL_ERRATUM_A008850 - select SYS_FSL_ERRATUM_A008997 - select SYS_FSL_ERRATUM_A009007 - select SYS_FSL_ERRATUM_A009008 + select SYS_FSL_ERRATUM_A008997 if USB + select SYS_FSL_ERRATUM_A009007 if USB + select SYS_FSL_ERRATUM_A009008 if USB select SYS_FSL_ERRATUM_A009663 - select SYS_FSL_ERRATUM_A009798 + select SYS_FSL_ERRATUM_A009798 if USB select SYS_FSL_ERRATUM_A009942 select SYS_FSL_ERRATUM_A010315 select SYS_FSL_HAS_CCI400 diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig index 3655990772..f2474413cc 100644 --- a/arch/arm/cpu/armv8/Kconfig +++ b/arch/arm/cpu/armv8/Kconfig @@ -115,7 +115,7 @@ config PSCI_RESET !TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \ !TARGET_LS1046AFRWY && \ !TARGET_LS2081ARDB && !TARGET_LX2160ARDB && \ - !TARGET_LX2160AQDS && \ + !TARGET_LX2160AQDS && !TARGET_LX2162AQDS && \ !ARCH_UNIPHIER && !TARGET_S32V234EVB help Most armv8 systems have PSCI support enabled in EL3, either through diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index be51b7d856..4d46587214 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -208,6 +208,35 @@ config ARCH_LS2080A imply DISTRO_DEFAULTS imply PANIC_HANG +config ARCH_LX2162A + bool + select ARMV8_SET_SMPEN + select FSL_LSCH3 + select NXP_LSCH3_2 + select SYS_HAS_SERDES + select SYS_FSL_SRDS_1 + select SYS_FSL_SRDS_2 + select SYS_FSL_DDR + select SYS_FSL_DDR_LE + select SYS_FSL_DDR_VER_50 + select SYS_FSL_EC1 + select SYS_FSL_EC2 + select SYS_FSL_ERRATUM_A050106 + select SYS_FSL_HAS_RGMII + select SYS_FSL_HAS_SEC + select SYS_FSL_HAS_CCN508 + select SYS_FSL_HAS_DDR4 + select SYS_FSL_SEC_COMPAT_5 + select SYS_FSL_SEC_LE + select ARCH_EARLY_INIT_R + select BOARD_EARLY_INIT_F + select SYS_I2C_MXC + select RESV_RAM if GIC_V3_ITS + imply DISTRO_DEFAULTS + imply PANIC_HANG + imply SCSI + imply SCSI_AHCI + config ARCH_LX2160A bool select ARMV8_SET_SMPEN @@ -345,7 +374,7 @@ config SYS_FSL_ERRATUM_A050106 help USB3.0 Receiver needs to enable fixed equalization for each of PHY instances in an SOC. This is similar - to erratum A-009007, but this one is for LX2160A, + to erratum A-009007, but this one is for LX2160A and LX2162A, and the register value is different. config SYS_FSL_ERRATUM_A010315 @@ -362,6 +391,7 @@ config MAX_CPUS default 16 if ARCH_LS2080A default 8 if ARCH_LS1088A default 16 if ARCH_LX2160A + default 16 if ARCH_LX2162A default 1 help Set this number to the maximum number of possible CPUs in the SoC. @@ -491,6 +521,7 @@ config SYS_FSL_DUART_CLK_DIV int "DUART clock divider" default 1 if ARCH_LS1043A default 4 if ARCH_LX2160A + default 4 if ARCH_LX2162A default 2 help This is the divider that is used to derive DUART clock from Platform @@ -502,6 +533,7 @@ config SYS_FSL_I2C_CLK_DIV default 4 if ARCH_LS1012A default 4 if ARCH_LS1028A default 8 if ARCH_LX2160A + default 8 if ARCH_LX2162A default 8 if ARCH_LS1088A default 2 help @@ -514,6 +546,7 @@ config SYS_FSL_IFC_CLK_DIV default 4 if ARCH_LS1012A default 4 if ARCH_LS1028A default 8 if ARCH_LX2160A + default 8 if ARCH_LX2162A default 8 if ARCH_LS1088A default 2 help @@ -560,14 +593,14 @@ config SYS_FSL_EC1 bool help Ethernet controller 1, this is connected to - MAC17 for LX2160A or to MAC3 for other SoCs + MAC17 for LX2160A and LX2162A or to MAC3 for other SoCs Provides DPAA2 capabilities config SYS_FSL_EC2 bool help Ethernet controller 2, this is connected to - MAC18 for LX2160A or to MAC4 for other SoCs + MAC18 for LX2160A and LX2162A or to MAC4 for other SoCs Provides DPAA2 capabilities config SYS_FSL_ERRATUM_A008336 diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile index 9ecb372b4e..598c36ee66 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile +++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile @@ -27,6 +27,11 @@ obj-$(CONFIG_SYS_HAS_SERDES) += lx2160a_serdes.o obj-y += icid.o lx2160_ids.o endif +ifneq ($(CONFIG_ARCH_LX2162A),) +obj-$(CONFIG_SYS_HAS_SERDES) += lx2160a_serdes.o +obj-y += icid.o lx2160_ids.o +endif + ifneq ($(CONFIG_ARCH_LS2080A),) obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o obj-y += icid.o ls2088_ids.o diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index 596b88d3e2..1a5d26b537 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -79,6 +79,9 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(LX2160A, LX2160A, 16), CPU_TYPE_ENTRY(LX2120A, LX2120A, 12), CPU_TYPE_ENTRY(LX2080A, LX2080A, 8), + CPU_TYPE_ENTRY(LX2162A, LX2162A, 16), + CPU_TYPE_ENTRY(LX2122A, LX2122A, 12), + CPU_TYPE_ENTRY(LX2082A, LX2082A, 8), }; #define EARLY_PGTABLE_SIZE 0x5000 @@ -403,7 +406,7 @@ void cpu_name(char *name) for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++) if ((cpu_type_list[i].soc_ver & SVR_WO_E) == ver) { strcpy(name, cpu_type_list[i].name); -#ifdef CONFIG_ARCH_LX2160A +#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) if (IS_C_PROCESSOR(svr)) strcat(name, "C"); #endif @@ -1229,7 +1232,7 @@ __efi_runtime_data u32 __iomem *rstcr = (u32 *)CONFIG_SYS_FSL_RST_ADDR; void __efi_runtime reset_cpu(ulong addr) { -#ifdef CONFIG_ARCH_LX2160A +#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) /* clear the RST_REQ_MSK and SW_RST_REQ */ out_le32(rstcr, 0x0); diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc index ad55573c85..f33d05d053 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc @@ -9,6 +9,7 @@ SoC overview 7. LS2081A 8. LX2160A 9. LS1028A + 10. LX2162A LS1043A --------- @@ -379,3 +380,58 @@ The LS1028A SoC includes the following function and features: - Layerscape Trust Architecture - Service Processor (SP) provides pre-boot initialization and secure-boot capabilities + +LX2162A +-------- +The QorIQ LX2162A processor is built on the Layerscape architecture +combining sixteen ARM A72 processor cores with advanced, high-performance +datapath acceleration and network, peripheral interfaces required for +networking, wireless infrastructure, storage, and general-purpose embedded +applications. + +LX2162A is compliant with the Layerscape Chassis Generation 3.2. + +The LX2162A SoC includes the following function and features: + Sixteen 32-bit / 64-bit ARM v8 A72 CPUs + Cache Coherent Interconnect Fabric (CCN508) + One 64-bit 2.9GT/s DDR4 SDRAM memory controllers with ECC. + Data path acceleration architecture (DPAA2) + 12 Serdes lanes at up to 25 GHz + Ethernet interfaces + Support for 10G-SXGMII (aka USXGMII). + Support for SGMII (and 1000Base-KX) + Support for XFI (and 10GBase-KR) + Support for CAUI2 (50G) and 25G-AUI(25G). + Support for XLAUI (and 40GBase-KR4) for 40G. + Support for two RGMII parallel interfaces. + Energy efficient Ethernet support (802.3az) + IEEE 1588 support. + High-speed peripheral interfaces + One PCIe Gen 3.0 8-lane controllers supporting SR-IOV, + Two PCIe Gen 3.0 4-lane controllers. + Four serial ATA (SATA 3.0) controllers. + One USB 3.0 controllers with integrated PHY + Two Enhanced secure digital host controllers + Two Controller Area Network (CAN) modules + Flexible Serial peripheral interface (FlexSPI) controller. + Three Serial peripheral interface (SPI) controllers. + Eight I2C Controllers. + Four PL011 UARTs supporting two 4-pin UART ports or four 2-pin UART ports. + General Purpose IO (GPIO) + Support for hardware virtualization and partitioning (ARM MMU-500) + Support for GIC (ARM GIC-500) + QorIQ platform Trust Architecture 3.0 + One Secure WatchDog timer and one Non-Secure Watchdog timer. + ARM Generic Timer + Two Flextimers + Debug supporting run control, data acquisition, high-speed trace, + performance/event monitoring + Thermal Monitor Unit (TMU) with +/- 2C accuracy + Support for Voltage ID (VID) for yield improvement + +LX2162A SoC has 2 more similar SoC personalities +1)LX2122A, few difference w.r.t. LX2162A: + a) Twelve 64-bit ARM v8 Cortex-A72 CPUs + +2)LX2082A, few difference w.r.t. LX2162A: + a) Eight 64-bit ARM v8 Cortex-A72 CPUs diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c index 598ee2ffa2..7f29aa4725 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c @@ -400,10 +400,12 @@ void fdt_fixup_remove_jr(void *blob) while (jr_node != -FDT_ERR_NOTFOUND) { reg = (fdt32_t *)fdt_getprop(blob, jr_node, "reg", &len); - jr_offset = fdt_read_number(reg, addr_cells); - if (jr_offset == used_jr) { - fdt_del_node(blob, jr_node); - break; + if (reg) { + jr_offset = fdt_read_number(reg, addr_cells); + if (jr_offset == used_jr) { + fdt_del_node(blob, jr_node); + break; + } } jr_node = fdt_node_offset_by_compatible(blob, jr_node, "fsl,sec-v4.0-job-ring"); diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c index aa6fd6b28c..fad7a93566 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright 2016-2018 NXP + * Copyright 2016-2018, 2020 NXP * Copyright 2014-2015 Freescale Semiconductor, Inc. */ @@ -26,7 +26,7 @@ static u8 serdes3_prtcl_map[SERDES_PRCTL_COUNT]; #endif #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) -#ifdef CONFIG_ARCH_LX2160A +#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) int xfi_dpmac[XFI14 + 1]; int sgmii_dpmac[SGMII18 + 1]; int a25gaui_dpmac[_25GE10 + 1]; @@ -159,7 +159,7 @@ void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask, else { serdes_prtcl_map[lane_prtcl] = 1; #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) -#ifdef CONFIG_ARCH_LX2160A +#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) if (lane_prtcl >= XFI1 && lane_prtcl <= XFI14) wriop_init_dpmac(sd, xfi_dpmac[lane_prtcl], (int)lane_prtcl); @@ -552,7 +552,7 @@ void fsl_serdes_init(void) #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) int i , j; -#ifdef CONFIG_ARCH_LX2160A +#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) for (i = XFI1, j = 1; i <= XFI14; i++, j++) xfi_dpmac[i] = j; diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c index 7f8178f72e..bf153c720e 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Copyright 2014-2015, Freescale Semiconductor, Inc. - * Copyright 2019 NXP Semiconductors + * Copyright 2019-2020 NXP * * Derived from arch/power/cpu/mpc85xx/speed.c */ @@ -180,7 +180,7 @@ int get_clocks(void) #ifdef CONFIG_FSL_ESDHC #if defined(CONFIG_ARCH_LS1028A) || defined(CONFIG_ARCH_LS1088A) clock = sys_info.freq_cga_m2; -#elif defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LS2080A) +#elif defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LX2162A) clock = sys_info.freq_systembus; #endif gd->arch.sdhc_per_clk = clock / CONFIG_SYS_FSL_SDHC_CLK_DIV; diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lx2160a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/lx2160a_serdes.c index a04a370268..5941d90e03 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/lx2160a_serdes.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/lx2160a_serdes.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright 2018 NXP + * Copyright 2018, 2020 NXP */ #include <common.h> @@ -11,6 +11,22 @@ struct serdes_config { u8 lanes[SRDS_MAX_LANES]; }; +#if defined(CONFIG_ARCH_LX2162A) +static struct serdes_config serdes1_cfg_tbl[] = { + /* SerDes 1 */ + {0x01, {PCIE1, PCIE1, PCIE1, PCIE1 } }, + {0x02, {SGMII6, SGMII5, SGMII4, SGMII3 } }, + {0x03, {XFI6, XFI5, XFI4, XFI3 } }, + {0x09, {SGMII6, SGMII5, SGMII4, PCIE1 } }, + {0x0B, {SGMII6, SGMII5, PCIE1, PCIE1 } }, + {0x0F, {_50GE2, _50GE2, _50GE1, _50GE1 } }, + {0x10, {_25GE6, _25GE5, _50GE1, _50GE1 } }, + {0x11, {_25GE6, _25GE5, _25GE4, _25GE3 } }, + {0x12, {_25GE6, _25GE5, XFI4, XFI3 } }, + {0x14, {_40GE1, _40GE1, _40GE1, _40GE1 } }, + {} +}; +#else static struct serdes_config serdes1_cfg_tbl[] = { /* SerDes 1 */ {0x01, {PCIE2, PCIE2, PCIE2, PCIE2, PCIE1, PCIE1, PCIE1, PCIE1 } }, @@ -48,6 +64,7 @@ static struct serdes_config serdes1_cfg_tbl[] = { {0x16, {XFI10, XFI9, PCIE2, PCIE2, XFI6, XFI5, XFI4, XFI3 } }, {} }; +#endif static struct serdes_config serdes2_cfg_tbl[] = { /* SerDes 2 */ diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 96b2775f3f..7553b5bce2 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Copyright 2014-2015 Freescale Semiconductor - * Copyright 2019 NXP + * Copyright 2019-2020 NXP */ #include <common.h> @@ -33,13 +33,10 @@ #include <fsl_validate.h> #endif #include <fsl_immap.h> -#ifdef CONFIG_TFABOOT -#include <env_internal.h> -#endif #include <dm.h> #include <dm/device_compat.h> #include <linux/err.h> -#if defined(CONFIG_TFABOOT) || defined(CONFIG_GIC_V3_ITS) +#ifdef CONFIG_GIC_V3_ITS DECLARE_GLOBAL_DATA_PTR; #endif @@ -186,7 +183,8 @@ static void erratum_a008997(void) out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_4) #elif defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A) || \ - defined(CONFIG_ARCH_LS1028A) || defined(CONFIG_ARCH_LX2160A) + defined(CONFIG_ARCH_LS1028A) || defined(CONFIG_ARCH_LX2160A) || \ + defined(CONFIG_ARCH_LX2162A) #define PROGRAM_USB_PHY_RX_OVRD_IN_HI(phy) \ out_le16((phy) + DCSR_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_1); \ @@ -222,7 +220,7 @@ static void erratum_a009007(void) #if defined(CONFIG_FSL_LSCH3) static void erratum_a050106(void) { -#if defined(CONFIG_ARCH_LX2160A) +#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) void __iomem *dcsr = (void __iomem *)DCSR_BASE; PROGRAM_USB_PHY_RX_OVRD_IN_HI(dcsr + DCSR_USB_PHY1); @@ -392,7 +390,8 @@ void fsl_lsch3_early_init_f(void) #endif #if defined(CONFIG_ARCH_LS1088A) || defined(CONFIG_ARCH_LS1028A) || \ - defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LX2160A) + defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LX2160A) || \ + defined(CONFIG_ARCH_LX2162A) set_icids(); #endif } @@ -954,28 +953,12 @@ int board_late_init(void) #endif #ifdef CONFIG_TFABOOT /* - * check if gd->env_addr is default_environment; then setenv bootcmd - * and mcinitcmd. - */ -#ifdef CONFIG_SYS_RELOC_GD_ENV_ADDR - if (gd->env_addr == (ulong)&default_environment[0]) { -#else - if (gd->env_addr + gd->reloc_off == (ulong)&default_environment[0]) { -#endif - fsl_setenv_bootcmd(); - fsl_setenv_mcinitcmd(); - } - - /* - * If the boot mode is secure, default environment is not present then - * setenv command needs to be run by default + * Set bootcmd and mcinitcmd if they don't exist in the environment. */ -#ifdef CONFIG_CHAIN_OF_TRUST - if ((fsl_check_boot_mode_secure() == 1)) { + if (!env_get("bootcmd")) fsl_setenv_bootcmd(); + if (!env_get("mcinitcmd")) fsl_setenv_mcinitcmd(); - } -#endif #endif #ifdef CONFIG_QSPI_AHB_INIT qspi_ahb_init(); diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index e2e8a5fb7a..fd47e408f8 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -204,7 +204,6 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ dtb-$(CONFIG_ARCH_MVEBU) += \ armada-3720-db.dtb \ armada-3720-espressobin.dtb \ - armada-3720-espressobin-emmc.dtb \ armada-3720-turris-mox.dtb \ armada-3720-uDPU.dtb \ armada-375-db.dtb \ @@ -415,7 +414,11 @@ dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \ fsl-lx2160a-qds-19-x-x.dtb \ fsl-lx2160a-qds-19-11-x.dtb \ fsl-lx2160a-qds-20-x-x.dtb \ - fsl-lx2160a-qds-20-11-x.dtb + fsl-lx2160a-qds-20-11-x.dtb \ + fsl-lx2162a-qds.dtb\ + fsl-lx2162a-qds-17-x.dtb\ + fsl-lx2162a-qds-18-x.dtb\ + fsl-lx2162a-qds-20-x.dtb dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \ fsl-ls1043a-qds-lpuart.dtb \ fsl-ls1043a-rdb.dtb \ @@ -643,14 +646,8 @@ dtb-$(CONFIG_MX53) += imx53-cx9020.dtb \ ifneq ($(CONFIG_MX6DL)$(CONFIG_MX6QDL)$(CONFIG_MX6S),) dtb-y += \ - imx6dl-aristainetos2_4.dtb \ - imx6dl-aristainetos2_7.dtb \ - imx6dl-aristainetos2b_4.dtb \ - imx6dl-aristainetos2b_7.dtb \ - imx6dl-aristainetos2b_csl_4.dtb \ - imx6dl-aristainetos2b_csl_7.dtb \ - imx6dl-aristainetos2c_4.dtb \ imx6dl-aristainetos2c_7.dtb \ + imx6dl-aristainetos2c_cslb_7.dtb \ imx6dl-brppt2.dtb \ imx6dl-cubox-i.dtb \ imx6dl-cubox-i-emmc-som-v15.dtb \ @@ -768,6 +765,7 @@ dtb-$(CONFIG_ARCH_IMX8) += \ imx8qm-rom7720-a1.dtb \ fsl-imx8qxp-ai_ml.dtb \ fsl-imx8qxp-colibri.dtb \ + fsl-imx8qxp-apalis.dtb \ fsl-imx8qxp-mek.dtb \ imx8-deneb.dtb \ imx8-giedi.dtb diff --git a/arch/arm/dts/armada-3720-espressobin-emmc.dts b/arch/arm/dts/armada-3720-espressobin-emmc.dts deleted file mode 100644 index 29ccb6a573..0000000000 --- a/arch/arm/dts/armada-3720-espressobin-emmc.dts +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC - * Copyright (C) 2018 Marvell - * - * Romain Perier <romain.perier@free-electrons.com> - * Konstantin Porotchkin <kostap@marvell.com> - * - */ -/* - * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf - */ - -/dts-v1/; - -#include "armada-3720-espressobin.dtsi" - -/ { - model = "Globalscale Marvell ESPRESSOBin Board (eMMC)"; - compatible = "globalscale,espressobin-emmc", "globalscale,espressobin", - "marvell,armada3720", "marvell,armada3710"; -}; - -/* U11 */ -&sdhci1 { - non-removable; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,xenon-emmc; - marvell,xenon-tun-count = <9>; - marvell,pad-type = "fixed-1-8v"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc_pins>; - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - mmccard: mmccard@0 { - compatible = "mmc-card"; - reg = <0>; - }; -}; diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts index 1542d836c0..96a4b3d95b 100644 --- a/arch/arm/dts/armada-3720-espressobin.dts +++ b/arch/arm/dts/armada-3720-espressobin.dts @@ -1,20 +1,192 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Device Tree file for Globalscale Marvell ESPRESSOBin Board + * Device Tree file for Marvell Armada 3720 community board + * (ESPRESSOBin) * Copyright (C) 2016 Marvell * - * Romain Perier <romain.perier@free-electrons.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> * - */ -/* - * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -#include "armada-3720-espressobin.dtsi" +#include "armada-372x.dtsi" / { model = "Globalscale Marvell ESPRESSOBin Board"; compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + ethernet0 = ð0; + i2c0 = &i2c0; + spi0 = &spi0; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + vcc_sd_reg0: regulator@0 { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-type = "voltage"; + states = <1800000 0x1 + 3300000 0x0>; + gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>; + }; +}; + +&comphy { + max-lanes = <3>; + phy0 { + phy-type = <PHY_TYPE_USB3_HOST0>; + phy-speed = <PHY_SPEED_5G>; + }; + + phy1 { + phy-type = <PHY_TYPE_PEX0>; + phy-speed = <PHY_SPEED_2_5G>; + }; + + phy2 { + phy-type = <PHY_TYPE_SATA0>; + phy-speed = <PHY_SPEED_5G>; + }; +}; + +ð0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&smi_pins>; + phy-mode = "rgmii"; + phy_addr = <0x1>; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +/* CON3 */ +&sata { + status = "okay"; +}; + +&sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; + bus-width = <4>; + cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; + vqmmc-supply = <&vcc_sd_reg0>; + status = "okay"; +}; + +/* U11 */ +&sdhci1 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p128", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + m25p,fast-read; + }; +}; + +/* Exported on the micro USB connector CON32 through an FTDI */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +/* CON29 */ +&usb2 { + status = "okay"; +}; + +/* CON31 */ +&usb3 { + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; + status = "okay"; }; diff --git a/arch/arm/dts/armada-3720-espressobin.dtsi b/arch/arm/dts/armada-3720-espressobin.dtsi deleted file mode 100644 index 05dec89834..0000000000 --- a/arch/arm/dts/armada-3720-espressobin.dtsi +++ /dev/null @@ -1,167 +0,0 @@ -/* - * Device Tree file for Marvell Armada 3720 community board - * (ESPRESSOBin) - * Copyright (C) 2016 Marvell - * - * Gregory CLEMENT <gregory.clement@free-electrons.com> - * Konstantin Porotchkin <kostap@marvell.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; - -#include "armada-372x.dtsi" - -/ { - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - ethernet0 = ð0; - i2c0 = &i2c0; - spi0 = &spi0; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x20000000>; - }; - - vcc_sd_reg0: regulator@0 { - compatible = "regulator-gpio"; - regulator-name = "vcc_sd0"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-type = "voltage"; - states = <1800000 0x1 - 3300000 0x0>; - gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>; - }; -}; - -&comphy { - max-lanes = <3>; - phy0 { - phy-type = <PHY_TYPE_USB3_HOST0>; - phy-speed = <PHY_SPEED_5G>; - }; - - phy1 { - phy-type = <PHY_TYPE_PEX0>; - phy-speed = <PHY_SPEED_2_5G>; - }; - - phy2 { - phy-type = <PHY_TYPE_SATA0>; - phy-speed = <PHY_SPEED_5G>; - }; -}; - -ð0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>, <&smi_pins>; - phy-mode = "rgmii"; - phy_addr = <0x1>; - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - status = "okay"; -}; - -/* CON3 */ -&sata { - status = "okay"; -}; - -&sdhci0 { - pinctrl-names = "default"; - pinctrl-0 = <&sdio_pins>; - bus-width = <4>; - cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; - vqmmc-supply = <&vcc_sd_reg0>; - status = "okay"; -}; - -&spi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi_quad_pins>; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p128", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <50000000>; - m25p,fast-read; - }; -}; - -/* Exported on the micro USB connector CON32 through an FTDI */ -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; - status = "okay"; -}; - -/* CON29 */ -&usb2 { - status = "okay"; -}; - -/* CON31 */ -&usb3 { - status = "okay"; -}; - -&pcie0 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie_pins>; - reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; - status = "okay"; -}; diff --git a/arch/arm/dts/armada-xp-gp-u-boot.dtsi b/arch/arm/dts/armada-xp-gp-u-boot.dtsi new file mode 100644 index 0000000000..2422856616 --- /dev/null +++ b/arch/arm/dts/armada-xp-gp-u-boot.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/ { + soc { + internal-regs { + serial@12000 { + u-boot,dm-pre-reloc; + }; + }; + }; +}; + +&spi0 { + u-boot,dm-pre-reloc; + + spi-flash@0 { + u-boot,dm-pre-reloc; + }; +}; diff --git a/arch/arm/dts/armada-xp-gp.dts b/arch/arm/dts/armada-xp-gp.dts index 1139e9469a..d46475fe22 100644 --- a/arch/arm/dts/armada-xp-gp.dts +++ b/arch/arm/dts/armada-xp-gp.dts @@ -31,6 +31,10 @@ stdout-path = "serial0:115200n8"; }; + aliases { + spi0 = &spi0; + }; + memory@0 { device_type = "memory"; /* diff --git a/arch/arm/dts/at91-sama5d2_icp.dts b/arch/arm/dts/at91-sama5d2_icp.dts index cae8748268..f81fa60171 100644 --- a/arch/arm/dts/at91-sama5d2_icp.dts +++ b/arch/arm/dts/at91-sama5d2_icp.dts @@ -53,19 +53,19 @@ status = "okay"; eeprom@50 { - compatible = "atmel,24c32"; + compatible = "microchip,24aa02e48"; reg = <0x50>; pagesize = <16>; }; eeprom@52 { - compatible = "atmel,24c32"; + compatible = "microchip,24aa02e48"; reg = <0x52>; pagesize = <16>; }; eeprom@53 { - compatible = "atmel,24c32"; + compatible = "microchip,24aa02e48"; reg = <0x53>; pagesize = <16>; }; diff --git a/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi b/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi index 80d6475b7c..9e0d264b71 100644 --- a/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi +++ b/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi @@ -118,8 +118,11 @@ &usdhc1 { u-boot,dm-spl; + mmc-hs400-1_8v; }; &usdhc2 { u-boot,dm-spl; + sd-uhs-sdr104; + sd-uhs-ddr50; }; diff --git a/arch/arm/dts/fsl-imx8qxp-apalis-u-boot.dtsi b/arch/arm/dts/fsl-imx8qxp-apalis-u-boot.dtsi new file mode 100644 index 0000000000..e41911a04a --- /dev/null +++ b/arch/arm/dts/fsl-imx8qxp-apalis-u-boot.dtsi @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2020 Toradex + */ + +&{/imx8qx-pm} { + + u-boot,dm-pre-proper; +}; + +&mu { + u-boot,dm-pre-proper; +}; + +&clk { + u-boot,dm-pre-proper; +}; + +&iomuxc { + u-boot,dm-pre-proper; +}; + +&pd_lsio { + u-boot,dm-pre-proper; +}; + +&pd_lsio_gpio0 { + u-boot,dm-pre-proper; +}; + +&pd_lsio_gpio1 { + u-boot,dm-pre-proper; +}; + +&pd_lsio_gpio2 { + u-boot,dm-pre-proper; +}; + +&pd_lsio_gpio3 { + u-boot,dm-pre-proper; +}; + +&pd_lsio_gpio4 { + u-boot,dm-pre-proper; +}; + +&pd_lsio_gpio5 { + u-boot,dm-pre-proper; +}; + +&pd_lsio_gpio6 { + u-boot,dm-pre-proper; +}; + +&pd_lsio_gpio7 { + u-boot,dm-pre-proper; +}; + +&pd_dma { + u-boot,dm-pre-proper; +}; + +&pd_dma_lpuart0 { + u-boot,dm-pre-proper; +}; + +&pd_dma_lpuart3 { + u-boot,dm-pre-proper; +}; + +&pd_conn { + u-boot,dm-pre-proper; +}; + +&pd_conn_sdch0 { + u-boot,dm-pre-proper; +}; + +&pd_conn_sdch1 { + u-boot,dm-pre-proper; +}; + +&pd_conn_sdch2 { + u-boot,dm-pre-proper; +}; + +&pd_conn_enet0 { + u-boot,dm-pre-proper; +}; + +&gpio0 { + u-boot,dm-pre-proper; +}; + +&gpio1 { + u-boot,dm-pre-proper; +}; + +&gpio2 { + u-boot,dm-pre-proper; +}; + +&gpio3 { + u-boot,dm-pre-proper; +}; + +&gpio4 { + u-boot,dm-pre-proper; +}; + +&gpio5 { + u-boot,dm-pre-proper; +}; + +&gpio6 { + u-boot,dm-pre-proper; +}; + +&gpio7 { + u-boot,dm-pre-proper; +}; + +&lpuart3 { + u-boot,dm-pre-proper; +}; + +&lpuart0 { + u-boot,dm-pre-proper; +}; + +&usdhc1 { + u-boot,dm-pre-proper; + /delete-property/ assigned-clock-parents; +}; + +&usdhc2 { + u-boot,dm-pre-proper; + /delete-property/ assigned-clock-parents; +}; diff --git a/arch/arm/dts/fsl-imx8qxp-apalis.dts b/arch/arm/dts/fsl-imx8qxp-apalis.dts new file mode 100644 index 0000000000..6bd231b283 --- /dev/null +++ b/arch/arm/dts/fsl-imx8qxp-apalis.dts @@ -0,0 +1,278 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2020 Toradex + */ + +/dts-v1/; + +#include "fsl-imx8qxp.dtsi" +#include "fsl-imx8qxp-apalis-u-boot.dtsi" + +/ { + model = "Toradex Apalis iMX8X"; + compatible = "toradex,apalis-imx8x", "fsl,imx8qxp"; + + chosen { + bootargs = "console=ttyLP1,115200"; + stdout-path = &lpuart1; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog0>, <&pinctrl_hog1>, <&pinctrl_reset_moci>; + + apalis-imx8x { + /* Apalis UART1 */ + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + SC_P_UART1_RX_ADMA_UART1_RX 0x06000020 /* SODIMM 118 */ + SC_P_UART1_TX_ADMA_UART1_TX 0x06000020 /* SODIMM 112 */ + >; + }; + + /* On-module Gigabit Ethernet PHY Micrel KSZ9031 */ + pinctrl_fec1: fec1grp { + fsl,pins = < + SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD 0x14a0 + SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD 0x14a0 + SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x61 + SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x61 + SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x61 + SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x61 + SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x61 + SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x61 + SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x61 + SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x61 + SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x61 + SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x61 + SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x61 + SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x61 + /* On-module ETH_RESET# */ + SC_P_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04 0x06000020 + /* On-module ETH_INT# */ + SC_P_ADC_IN2_LSIO_GPIO1_IO12 0x21 + >; + }; + + /* Apalis BKL_ON */ + pinctrl_gpio_bkl_on: gpio-bkl-on { + fsl,pins = < + SC_P_QSPI0A_DQS_LSIO_GPIO3_IO13 0x40 /* SODIMM 286 */ + >; + }; + + pinctrl_hog0: hog0grp { + fsl,pins = < + SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD 0x000514a0 + >; + }; + + pinctrl_hog1: hog1grp { + fsl,pins = < + /* Apalis USBO1_EN */ + SC_P_QSPI0A_SCLK_LSIO_GPIO3_IO16 0x41 /* SODIMM 274 */ + >; + }; + + /* Apalis RESET_MOCI# */ + pinctrl_reset_moci: gpioresetmocigrp { + fsl,pins = < + SC_P_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01 0x21 + >; + }; + + /* On-module eMMC */ + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x21 + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 + SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x21 + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 + SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x21 + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 + SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 + >; + }; + + /* Apalis MMC1_CD# */ + pinctrl_usdhc2_gpio: mmc1gpiogrp { + fsl,pins = < + SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22 0x06000021 /* SODIMM 164 */ + >; + }; + + pinctrl_usdhc2_gpio_sleep: usdhc1gpioslpgrp { + fsl,pins = < + SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22 0x60 /* SODIMM 164 */ + >; + }; + + /* Apalis USBH_EN */ + pinctrl_usbh_en: usbhen { + fsl,pins = < + SC_P_USB_SS3_TC1_LSIO_GPIO4_IO04 0x40 /* SODIMM 84 */ + >; + }; + + /* Apalis MMC1 */ + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 154 */ + SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 150 */ + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 160 */ + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 162 */ + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 144 */ + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 146 */ + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 154 */ + SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 150 */ + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 160 */ + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 162 */ + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 144 */ + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 146 */ + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 154 */ + SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 150 */ + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 160 */ + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 162 */ + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 144 */ + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 146 */ + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 + >; + }; + + pinctrl_usdhc2_sleep: usdhc2slpgrp { + fsl,pins = < + SC_P_USDHC1_CLK_LSIO_GPIO4_IO23 0x60 /* SODIMM 154 */ + SC_P_USDHC1_CMD_LSIO_GPIO4_IO24 0x60 /* SODIMM 150 */ + SC_P_USDHC1_DATA0_LSIO_GPIO4_IO25 0x60 /* SODIMM 160 */ + SC_P_USDHC1_DATA1_LSIO_GPIO4_IO26 0x60 /* SODIMM 162 */ + SC_P_USDHC1_DATA2_LSIO_GPIO4_IO27 0x60 /* SODIMM 144 */ + SC_P_USDHC1_DATA3_LSIO_GPIO4_IO28 0x60 /* SODIMM 146 */ + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 + >; + }; + }; +}; + +/* Apalis Gigabit LAN */ +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + fsl,magic-packet; + phy-handle = <ðphy0>; + phy-mode = "rgmii"; + phy-reset-duration = <10>; + phy-reset-post-delay = <150>; + phy-reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + }; + }; +}; + +/* Apalis UART1 */ +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; +}; + +/* On-module eMMC */ +&usdhc1 { + bus-width = <8>; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + status = "okay"; +}; + +/* Apalis MMC1 */ +&usdhc2 { + bus-width = <4>; + cd-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>; + disable-wp; + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi b/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi index 771ab635f1..701af4434d 100644 --- a/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi +++ b/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi @@ -118,8 +118,11 @@ &usdhc1 { u-boot,dm-spl; + mmc-hs400-1_8v; }; &usdhc2 { u-boot,dm-spl; + sd-uhs-sdr104; + sd-uhs-ddr50; }; diff --git a/arch/arm/dts/fsl-ls1012a.dtsi b/arch/arm/dts/fsl-ls1012a.dtsi index 2d70c82a72..c401ba33ac 100644 --- a/arch/arm/dts/fsl-ls1012a.dtsi +++ b/arch/arm/dts/fsl-ls1012a.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ OR X11 /* + * Copyright 2020 NXP * Copyright 2016 Freescale Semiconductor */ @@ -116,7 +117,7 @@ status = "disabled"; }; - pcie@3400000 { + pcie1: pcie@3400000 { compatible = "fsl,ls-pcie", "snps,dw-pcie"; reg = <0x00 0x03400000 0x0 0x80000 /* dbi registers */ 0x00 0x03480000 0x0 0x40000 /* lut registers */ diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi b/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi index 65d5684973..9b4e0298a7 100644 --- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi @@ -4,8 +4,8 @@ / { aliases { - mmc0 = &esdhc0; - mmc1 = &esdhc1; + mmc0 = &esdhc1; + mmc1 = &esdhc0; i2c0 = &i2c0; i2c1 = &i2c3; i2c2 = &i2c4; diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi index bf6373d5ec..d0850237c7 100644 --- a/arch/arm/dts/fsl-ls1028a.dtsi +++ b/arch/arm/dts/fsl-ls1028a.dtsi @@ -2,7 +2,7 @@ /* * NXP ls1028a SOC common device tree source * - * Copyright 2019 NXP + * Copyright 2019-2020 NXP * */ @@ -91,7 +91,7 @@ status = "disabled"; }; - pcie@3400000 { + pcie1: pcie@3400000 { compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie"; reg = <0x00 0x03400000 0x0 0x80000 0x00 0x03480000 0x0 0x40000 /* lut registers */ @@ -107,7 +107,7 @@ 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; - pcie@3500000 { + pcie2: pcie@3500000 { compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie"; reg = <0x00 0x03500000 0x0 0x80000 0x00 0x03580000 0x0 0x40000 /* lut registers */ diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi index f7db44c0fa..8ca57ea7b9 100644 --- a/arch/arm/dts/fsl-ls1043a.dtsi +++ b/arch/arm/dts/fsl-ls1043a.dtsi @@ -1,7 +1,8 @@ // SPDX-License-Identifier: GPL-2.0+ OR X11 /* - * Device Tree Include file for Freescale Layerscape-1043A family SoC. + * Device Tree Include file for NXP Layerscape-1043A family SoC. * + * Copyright 2020 NXP * Copyright (C) 2014-2015, Freescale Semiconductor * * Mingkai Hu <Mingkai.hu@freescale.com> @@ -240,7 +241,7 @@ dr_mode = "host"; }; - pcie@3400000 { + pcie1: pcie@3400000 { compatible = "fsl,ls-pcie", "snps,dw-pcie"; reg = <0x00 0x03400000 0x0 0x10000 /* dbi registers */ 0x00 0x03410000 0x0 0x10000 /* lut registers */ @@ -255,7 +256,7 @@ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; - pcie@3500000 { + pcie2: pcie@3500000 { compatible = "fsl,ls-pcie", "snps,dw-pcie"; reg = <0x00 0x03500000 0x0 0x10000 /* dbi registers */ 0x00 0x03510000 0x0 0x10000 /* lut registers */ @@ -271,7 +272,7 @@ 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; - pcie@3600000 { + pcie3: pcie@3600000 { compatible = "fsl,ls-pcie", "snps,dw-pcie"; reg = <0x00 0x03600000 0x0 0x10000 /* dbi registers */ 0x00 0x03610000 0x0 0x10000 /* lut registers */ diff --git a/arch/arm/dts/fsl-ls1046a.dtsi b/arch/arm/dts/fsl-ls1046a.dtsi index 3f11d6cd18..155455d591 100644 --- a/arch/arm/dts/fsl-ls1046a.dtsi +++ b/arch/arm/dts/fsl-ls1046a.dtsi @@ -241,7 +241,7 @@ dr_mode = "host"; }; - pcie@3400000 { + pcie1: pcie@3400000 { compatible = "fsl,ls-pcie", "snps,dw-pcie"; reg = <0x00 0x03400000 0x0 0x80000 /* dbi registers */ 0x00 0x03480000 0x0 0x40000 /* lut registers */ @@ -257,7 +257,7 @@ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; - pcie_ep@3400000 { + pcie_ep1: pcie_ep@3400000 { compatible = "fsl,ls-pcie-ep"; reg = <0x00 0x03400000 0x0 0x80000 0x00 0x034c0000 0x0 0x40000 @@ -268,7 +268,7 @@ big-endian; }; - pcie@3500000 { + pcie2: pcie@3500000 { compatible = "fsl,ls-pcie", "snps,dw-pcie"; reg = <0x00 0x03500000 0x0 0x80000 /* dbi registers */ 0x00 0x03580000 0x0 0x40000 /* lut registers */ @@ -285,7 +285,7 @@ 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; - pcie_ep@3500000 { + pcie_ep2: pcie_ep@3500000 { compatible = "fsl,ls-pcie-ep"; reg = <0x00 0x03500000 0x0 0x80000 0x00 0x035c0000 0x0 0x40000 @@ -296,7 +296,7 @@ big-endian; }; - pcie@3600000 { + pcie3: pcie@3600000 { compatible = "fsl,ls-pcie", "snps,dw-pcie"; reg = <0x00 0x03600000 0x0 0x80000 /* dbi registers */ 0x00 0x03680000 0x0 0x40000 /* lut registers */ @@ -312,7 +312,7 @@ 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; - pcie_ep@3600000 { + pcie_ep3: pcie_ep@3600000 { compatible = "fsl,ls-pcie-ep"; reg = <0x00 0x03600000 0x0 0x80000 0x00 0x036c0000 0x0 0x40000 diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi index 6653794d1c..7b4ac6d3de 100644 --- a/arch/arm/dts/fsl-ls1088a.dtsi +++ b/arch/arm/dts/fsl-ls1088a.dtsi @@ -2,7 +2,7 @@ /* * NXP ls1088a SOC common device tree source * - * Copyright 2017 NXP + * Copyright 2017, 2020 NXP */ / { @@ -135,7 +135,7 @@ dr_mode = "host"; }; - pcie@3400000 { + pcie1: pcie@3400000 { compatible = "fsl,ls-pcie", "snps,dw-pcie"; reg = <0x00 0x03400000 0x0 0x80000 /* dbi registers */ 0x00 0x03480000 0x0 0x80000 /* lut registers */ @@ -151,7 +151,7 @@ 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; - pcie@3500000 { + pcie2: pcie@3500000 { compatible = "fsl,ls-pcie", "snps,dw-pcie"; reg = <0x00 0x03500000 0x0 0x80000 /* dbi registers */ 0x00 0x03580000 0x0 0x80000 /* lut registers */ @@ -167,7 +167,7 @@ 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; - pcie@3600000 { + pcie3: pcie@3600000 { compatible = "fsl,ls-pcie", "snps,dw-pcie"; reg = <0x00 0x03600000 0x0 0x80000 /* dbi registers */ 0x00 0x03680000 0x0 0x80000 /* lut registers */ diff --git a/arch/arm/dts/fsl-ls2080a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi index 6b7bf8eb16..f0f4a82c14 100644 --- a/arch/arm/dts/fsl-ls2080a.dtsi +++ b/arch/arm/dts/fsl-ls2080a.dtsi @@ -1,7 +1,8 @@ // SPDX-License-Identifier: GPL-2.0+ OR X11 /* - * Freescale ls2080a SOC common device tree source + * NXP ls2080a SOC common device tree source * + * Copyright 2020 NXP * Copyright 2013-2015 Freescale Semiconductor, Inc. */ @@ -133,7 +134,7 @@ dr_mode = "host"; }; - pcie@3400000 { + pcie1: pcie@3400000 { compatible = "fsl,ls-pcie", "snps,dw-pcie"; reg = <0x00 0x03400000 0x0 0x80000 /* dbi registers */ 0x00 0x03480000 0x0 0x80000 /* lut registers */ @@ -148,7 +149,7 @@ 0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; - pcie@3500000 { + pcie2: pcie@3500000 { compatible = "fsl,ls-pcie", "snps,dw-pcie"; reg = <0x00 0x03500000 0x0 0x80000 /* dbi registers */ 0x00 0x03580000 0x0 0x80000 /* lut registers */ @@ -163,7 +164,7 @@ 0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; - pcie@3600000 { + pcie3: pcie@3600000 { compatible = "fsl,ls-pcie", "snps,dw-pcie"; reg = <0x00 0x03600000 0x0 0x80000 /* dbi registers */ 0x00 0x03680000 0x0 0x80000 /* lut registers */ @@ -178,7 +179,7 @@ 0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; - pcie@3700000 { + pcie4: pcie@3700000 { compatible = "fsl,ls-pcie", "snps,dw-pcie"; reg = <0x00 0x03700000 0x0 0x80000 /* dbi registers */ 0x00 0x03780000 0x0 0x80000 /* lut registers */ diff --git a/arch/arm/dts/fsl-lx2160a-qds.dts b/arch/arm/dts/fsl-lx2160a-qds.dts index e0f5d5e2d3..332c778d3a 100644 --- a/arch/arm/dts/fsl-lx2160a-qds.dts +++ b/arch/arm/dts/fsl-lx2160a-qds.dts @@ -13,7 +13,4 @@ / { model = "NXP Layerscape LX2160AQDS Board"; compatible = "fsl,lx2160aqds", "fsl,lx2160a"; - aliases { - spi0 = &fspi; - }; }; diff --git a/arch/arm/dts/fsl-lx2160a-qds.dtsi b/arch/arm/dts/fsl-lx2160a-qds.dtsi index 96c980004b..288607c034 100644 --- a/arch/arm/dts/fsl-lx2160a-qds.dtsi +++ b/arch/arm/dts/fsl-lx2160a-qds.dtsi @@ -2,12 +2,18 @@ /* * NXP LX2160AQDS common device tree source * - * Copyright 2018-2019 NXP + * Copyright 2018-2020 NXP * */ #include "fsl-lx2160a.dtsi" +/ { + aliases { + spi0 = &fspi; + }; +}; + &dpmac17 { status = "okay"; phy-handle = <&rgmii_phy1>; @@ -251,6 +257,20 @@ }; }; +&fspi { + status = "okay"; + + mt35xu512aba0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; + }; +}; + &sata0 { status = "okay"; }; diff --git a/arch/arm/dts/fsl-lx2160a.dtsi b/arch/arm/dts/fsl-lx2160a.dtsi index bfdf178738..a6f0e9bc56 100644 --- a/arch/arm/dts/fsl-lx2160a.dtsi +++ b/arch/arm/dts/fsl-lx2160a.dtsi @@ -325,7 +325,7 @@ }; - pcie@3400000 { + pcie1: pcie@3400000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03400000 0x0 0x80000 /* PAB registers */ 0x00 0x03480000 0x0 0x40000 /* LUT registers */ @@ -340,7 +340,7 @@ 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; - pcie@3500000 { + pcie2: pcie@3500000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03500000 0x0 0x80000 /* PAB registers */ 0x00 0x03580000 0x0 0x40000 /* LUT registers */ @@ -356,7 +356,7 @@ 0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; - pcie@3600000 { + pcie3: pcie@3600000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03600000 0x0 0x80000 /* PAB registers */ 0x00 0x03680000 0x0 0x40000 /* LUT registers */ @@ -371,7 +371,7 @@ 0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; - pcie@3700000 { + pcie4: pcie@3700000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03700000 0x0 0x80000 /* PAB registers */ 0x00 0x03780000 0x0 0x40000 /* LUT registers */ @@ -386,7 +386,7 @@ 0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; - pcie@3800000 { + pcie5: pcie@3800000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03800000 0x0 0x80000 /* PAB registers */ 0x00 0x03880000 0x0 0x40000 /* LUT registers */ @@ -401,7 +401,7 @@ 0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; - pcie@3900000 { + pcie6: pcie@3900000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03900000 0x0 0x80000 /* PAB registers */ 0x00 0x03980000 0x0 0x40000 /* LUT registers */ diff --git a/arch/arm/dts/fsl-lx2162a-qds-17-x.dts b/arch/arm/dts/fsl-lx2162a-qds-17-x.dts new file mode 100644 index 0000000000..8a8895f023 --- /dev/null +++ b/arch/arm/dts/fsl-lx2162a-qds-17-x.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2162AQDS device tree source for SERDES protocol 17.x + * + * Copyright 2020 NXP + * + */ + +/dts-v1/; + +#include "fsl-lx2162a-qds-sd1-17.dtsi" + +/ { + model = "NXP Layerscape LX2160AQDS Board (DTS 17.x)"; + compatible = "fsl,lx2162aqds", "fsl,lx2160a"; + +}; diff --git a/arch/arm/dts/fsl-lx2162a-qds-18-x.dts b/arch/arm/dts/fsl-lx2162a-qds-18-x.dts new file mode 100644 index 0000000000..c28e5e2497 --- /dev/null +++ b/arch/arm/dts/fsl-lx2162a-qds-18-x.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2162AQDS device tree source for SERDES protocol 18.x + * + * Copyright 2020 NXP + * + */ + +/dts-v1/; + +#include "fsl-lx2162a-qds-sd1-18.dtsi" + +/ { + model = "NXP Layerscape LX2160AQDS Board (DTS 18.x)"; + compatible = "fsl,lx2162aqds", "fsl,lx2160a"; + +}; diff --git a/arch/arm/dts/fsl-lx2162a-qds-20-x.dts b/arch/arm/dts/fsl-lx2162a-qds-20-x.dts new file mode 100644 index 0000000000..7882c767e2 --- /dev/null +++ b/arch/arm/dts/fsl-lx2162a-qds-20-x.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2162AQDS device tree source for SERDES protocol 20.x + * + * Copyright 2020 NXP + * + */ + +/dts-v1/; + +#include "fsl-lx2162a-qds-sd1-20.dtsi" + +/ { + model = "NXP Layerscape LX2160AQDS Board (DTS 20.x)"; + compatible = "fsl,lx2162aqds", "fsl,lx2160a"; + +}; diff --git a/arch/arm/dts/fsl-lx2162a-qds-sd1-17.dtsi b/arch/arm/dts/fsl-lx2162a-qds-sd1-17.dtsi new file mode 100644 index 0000000000..60f5a4ee43 --- /dev/null +++ b/arch/arm/dts/fsl-lx2162a-qds-sd1-17.dtsi @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2162AQDS device tree source for the SERDES block #1 - protocol 17 + * + * Some assumptions are made: + * * mezzanine card M8 is connected to IO SLOT1 (25g-aui for DPMAC 3,4,5,6) + * + * Copyright 2020 NXP + * + */ + +#include "fsl-lx2160a-qds.dtsi" + +&dpmac3 { + status = "okay"; + phy-handle = <&inphi_phy0>; + phy-connection-type = "25g-aui"; +}; + +&dpmac4 { + status = "okay"; + phy-handle = <&inphi_phy1>; + phy-connection-type = "25g-aui"; +}; + +&dpmac5 { + status = "okay"; + phy-handle = <&inphi_phy2>; + phy-connection-type = "25g-aui"; +}; + +&dpmac6 { + status = "okay"; + phy-handle = <&inphi_phy3>; + phy-connection-type = "25g-aui"; +}; + +&emdio1_slot1 { + inphi_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0210.7440"; + reg = <0x0>; + }; + + inphi_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0210.7440"; + reg = <0x1>; + }; + + inphi_phy2: ethernet-phy@2 { + compatible = "ethernet-phy-id0210.7440"; + reg = <0x2>; + }; + + inphi_phy3: ethernet-phy@3 { + compatible = "ethernet-phy-id0210.7440"; + reg = <0x3>; + }; +}; diff --git a/arch/arm/dts/fsl-lx2162a-qds-sd1-18.dtsi b/arch/arm/dts/fsl-lx2162a-qds-sd1-18.dtsi new file mode 100644 index 0000000000..8e11b0680a --- /dev/null +++ b/arch/arm/dts/fsl-lx2162a-qds-sd1-18.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2162AQDS device tree source for the SERDES block #1 - protocol 18 + * + * Some assumptions are made: + * * mezzanine card M11 is connected to IO SLOT1 (usxgmii for DPMAC 3,4) + * * mezzanine card M13/M8 is connected to IO SLOT6 (25g-aui for DPMAC 5,6) + * + * Copyright 2020 NXP + * + */ + +#include "fsl-lx2160a-qds.dtsi" + +&dpmac3 { + status = "okay"; + phy-handle = <&aquantia_phy1>; + phy-connection-type = "usxgmii"; +}; + +&dpmac4 { + status = "okay"; + phy-handle = <&aquantia_phy2>; + phy-connection-type = "usxgmii"; +}; + +&dpmac5 { + status = "okay"; + phy-handle = <&inphi_phy0>; + phy-connection-type = "25g-aui"; +}; + +&dpmac6 { + status = "okay"; + phy-handle = <&inphi_phy1>; + phy-connection-type = "25g-aui"; +}; + +&emdio1_slot1 { + aquantia_phy1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + + aquantia_phy2: ethernet-phy@5 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; +}; + +&emdio1_slot6 { + inphi_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0210.7440"; + reg = <0x0>; + }; + + inphi_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0210.7440"; + reg = <0x1>; + }; +}; diff --git a/arch/arm/dts/fsl-lx2162a-qds-sd1-20.dtsi b/arch/arm/dts/fsl-lx2162a-qds-sd1-20.dtsi new file mode 100644 index 0000000000..faf4285eab --- /dev/null +++ b/arch/arm/dts/fsl-lx2162a-qds-sd1-20.dtsi @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2162AQDS device tree source for the SERDES block #1 - protocol 20 + * + * Some assumptions are made: + * * Mezzanine card M8 is connected to IO SLOT1 + * (xlaui4 for DPMAC 1) + * + * Copyright 2020 NXP + * + */ + +#include "fsl-lx2160a-qds.dtsi" + +&dpmac1 { + status = "okay"; + phy-handle = <&cortina_phy1_0>; + phy-connection-type = "xlaui4"; +}; + +&emdio1_slot1 { + cortina_phy1_0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; +}; diff --git a/arch/arm/dts/fsl-lx2162a-qds.dts b/arch/arm/dts/fsl-lx2162a-qds.dts new file mode 100644 index 0000000000..b16526503d --- /dev/null +++ b/arch/arm/dts/fsl-lx2162a-qds.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2162AQDS device tree source + * + * Copyright 2020 NXP + * + */ + +/dts-v1/; + +#include "fsl-lx2160a-qds.dtsi" + +/ { + model = "NXP Layerscape LX2162AQDS Board"; + compatible = "fsl,lx2162aqds", "fsl,lx2160a"; + + aliases { + pcie@3500000 { + status = "disabled"; + }; + + pcie@3800000 { + status = "disabled"; + }; + + pcie@3900000 { + status = "disabled"; + }; + }; +}; + +&usb1 { + status = "disabled"; +}; diff --git a/arch/arm/dts/imx53-ppd-uboot.dtsi b/arch/arm/dts/imx53-ppd-uboot.dtsi index d61b7cb876..b293e27a03 100644 --- a/arch/arm/dts/imx53-ppd-uboot.dtsi +++ b/arch/arm/dts/imx53-ppd-uboot.dtsi @@ -28,7 +28,7 @@ #size-cells = <1>; vpd@0 { - reg = <0 1022>; + reg = <0 800>; }; bootcount: bootcount@1022 { diff --git a/arch/arm/dts/imx6dl-aristainetos2_4-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2_4-u-boot.dtsi deleted file mode 100644 index ac7052c7b7..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2_4-u-boot.dtsi +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2019 Heiko Schocher <hs@denx.de> - */ - -#include <imx6qdl-aristainetos2-u-boot.dtsi> - -&lcd_panel { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp>; - enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; - backlight = <&backlight>; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2_4.dts b/arch/arm/dts/imx6dl-aristainetos2_4.dts deleted file mode 100644 index 0157e244ae..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2_4.dts +++ /dev/null @@ -1,51 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2 board - * parts for 4.3 inch LG display on spi1 port0 - * - * Copyright (C) 2019 Heiko Schocher <hs@denx.de> - * Copyright (C) 2015 Heiko Schocher <hs@denx.de> - * - */ -/dts-v1/; - -#include "imx6dl-aristainetos2_4.dtsi" -#include "imx6qdl-aristainetos2.dtsi" - -/ { - model = "aristainetos2 i.MX6 Dual Lite Board 4"; - compatible = "fsl,imx6dl"; - -}; - -&ecspi1 { - lcd_panel: display@0 { - compatible = "lg,lg4573"; - spi-max-frequency = <10000000>; - reg = <0>; - power-on-delay = <10>; - - display-timings { - 480x800p57 { - native-mode; - clock-frequency = <27000027>; - hactive = <480>; - vactive = <800>; - hfront-porch = <10>; - hback-porch = <59>; - hsync-len = <10>; - vback-porch = <15>; - vfront-porch = <15>; - vsync-len = <15>; - hsync-active = <1>; - vsync-active = <1>; - }; - }; - - port { - panel_in: endpoint { - remote-endpoint = <&display_out>; - }; - }; - }; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2_4.dtsi b/arch/arm/dts/imx6dl-aristainetos2_4.dtsi deleted file mode 100644 index be4601b4b2..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2_4.dtsi +++ /dev/null @@ -1,84 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2 board - * parts for 4.3 inch LG display on the parallel port and atmel maxtouch - * - * Copyright (C) 2019 Heiko Schocher <hs@denx.de> - * Copyright (C) 2015 Heiko Schocher <hs@denx.de> - * - */ -/dts-v1/; -#include "imx6dl.dtsi" - -/ { - display0: disp0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp>; - - port@0 { - reg = <0>; - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - port@1 { - reg = <1>; - display_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; -}; - -&i2c3 { - touch: touch@4b { - compatible = "atmel,maxtouch"; - reg = <0x4b>; - interrupt-parent = <&gpio2>; - interrupts = <9 8>; - }; -}; - -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - -&iomuxc { - pinctrl_ipu_disp: ipudisp1grp { - fsl,pins = < - MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31 - MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xE1 - MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 - MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 - MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xE1 - MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xE1 - MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xE1 - MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xE1 - MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xE1 - MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xE1 - MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xE1 - MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xE1 - MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xE1 - MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xE1 - MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xE1 - MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xE1 - MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xE1 - MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xE1 - MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xe1 - MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xE1 - MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xE1 - MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xE1 - MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xE1 - MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xE1 - MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xE1 - MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xE1 - MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xE1 - MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xE1 - >; - }; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2_7-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2_7-u-boot.dtsi deleted file mode 100644 index 25bc562064..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2_7-u-boot.dtsi +++ /dev/null @@ -1,19 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2019 Heiko Schocher <hs@denx.de> - */ - -#include <imx6qdl-aristainetos2-u-boot.dtsi> -/ { - vdd_panel_reg: regulator-panel { - compatible = "regulator-fixed"; - regulator-name = "panel_regulator"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; -}; - -&panel0 { - power-supply = <&vdd_panel_reg>; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2_7.dts b/arch/arm/dts/imx6dl-aristainetos2_7.dts deleted file mode 100644 index 0d1e83cb68..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2_7.dts +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2 board - * - * Copyright (C) 2019 Heiko Schocher <hs@denx.de> - * Copyright (C) 2015 Heiko Schocher <hs@denx.de> - * - */ -/dts-v1/; -#include "imx6dl-aristainetos2_7.dtsi" -#include "imx6qdl-aristainetos2.dtsi" - -/ { - model = "aristainetos2 i.MX6 Dual Lite Board 7"; - compatible = "fsl,imx6dl"; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2_7.dtsi b/arch/arm/dts/imx6dl-aristainetos2_7.dtsi index 52d6a517a7..ec633b8ed1 100644 --- a/arch/arm/dts/imx6dl-aristainetos2_7.dtsi +++ b/arch/arm/dts/imx6dl-aristainetos2_7.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: (GPL-2.0) /* * support for the imx6 based aristainetos2 board - * parts for 7 inch LG display connected to the LVDS port and atmel maxtouch + * parts for 7 inch LG display connected to the LVDS port * * Copyright (C) 2019 Heiko Schocher <hs@denx.de> * Copyright (C) 2015 Heiko Schocher <hs@denx.de> @@ -26,15 +26,6 @@ }; }; -&i2c3 { - touch: touch@4d { - compatible = "atmel,maxtouch"; - reg = <0x4d>; - interrupt-parent = <&gpio2>; - interrupts = <9 8>; - }; -}; - &ldb { status = "okay"; diff --git a/arch/arm/dts/imx6dl-aristainetos2b_4-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2b_4-u-boot.dtsi deleted file mode 100644 index ee02df39c1..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2b_4-u-boot.dtsi +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ or X11 -/* - * Copyright (C) 2019 Heiko Schocher <hs@denx.de> - */ - -#include <imx6qdl-aristainetos2b-u-boot.dtsi> - -&lcd_panel { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp>; - enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; - backlight = <&backlight>; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2b_4.dts b/arch/arm/dts/imx6dl-aristainetos2b_4.dts deleted file mode 100644 index a48a25c119..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2b_4.dts +++ /dev/null @@ -1,50 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2b board - * parts for 4.3 inch LG display on spi1 port1 - * - * Copyright (C) 2019 Heiko Schocher <hs@denx.de> - * - */ -/dts-v1/; - -#include "imx6dl-aristainetos2_4.dtsi" -#include "imx6qdl-aristainetos2b.dtsi" - -/ { - model = "aristainetos2b i.MX6 Dual Lite Board 4"; - compatible = "fsl,imx6dl"; - -}; - -&ecspi1 { - lcd_panel: display@0 { - compatible = "lg,lg4573"; - spi-max-frequency = <10000000>; - reg = <1>; - power-on-delay = <10>; - - display-timings { - 480x800p57 { - native-mode; - clock-frequency = <27000027>; - hactive = <480>; - vactive = <800>; - hfront-porch = <10>; - hback-porch = <59>; - hsync-len = <10>; - vback-porch = <15>; - vfront-porch = <15>; - vsync-len = <15>; - hsync-active = <1>; - vsync-active = <1>; - }; - }; - - port { - panel_in: endpoint { - remote-endpoint = <&display_out>; - }; - }; - }; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2b_7-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2b_7-u-boot.dtsi deleted file mode 100644 index 0cb4f1974b..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2b_7-u-boot.dtsi +++ /dev/null @@ -1,19 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ or X11 -/* - * Copyright (C) 2019 Heiko Schocher <hs@denx.de> - */ - -#include <imx6qdl-aristainetos2b-u-boot.dtsi> -/ { - vdd_panel_reg: regulator-panel { - compatible = "regulator-fixed"; - regulator-name = "panel_regulator"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; -}; - -&panel0 { - power-supply = <&vdd_panel_reg>; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2b_7.dts b/arch/arm/dts/imx6dl-aristainetos2b_7.dts deleted file mode 100644 index f1496cbfdd..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2b_7.dts +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2 board - * - * Copyright (C) 2019 Heiko Schocher <hs@denx.de> - * Copyright (C) 2015 Heiko Schocher <hs@denx.de> - * - */ -/dts-v1/; -#include "imx6dl-aristainetos2_7.dtsi" -#include "imx6qdl-aristainetos2b.dtsi" - -/ { - model = "aristainetos2b i.MX6 Dual Lite Board 7"; - compatible = "fsl,imx6dl"; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2b_csl_4-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2b_csl_4-u-boot.dtsi deleted file mode 100644 index 654ac122a1..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2b_csl_4-u-boot.dtsi +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ or X11 -/* - * Copyright (C) 2019 Heiko Schocher <hs@denx.de> - */ - -#include <imx6qdl-aristainetos2b_csl-u-boot.dtsi> - -&lcd_panel { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp>; - enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; - backlight = <&backlight>; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2b_csl_4.dts b/arch/arm/dts/imx6dl-aristainetos2b_csl_4.dts deleted file mode 100644 index bfbb799f20..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2b_csl_4.dts +++ /dev/null @@ -1,50 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2b csl board - * parts for 4.3 inch LG display on spi1 port1 - * - * Copyright (C) 2019 Heiko Schocher <hs@denx.de> - * - */ -/dts-v1/; - -#include "imx6dl-aristainetos2_4.dtsi" -#include "imx6qdl-aristainetos2b_csl.dtsi" - -/ { - model = "aristainetos2b csl i.MX6 Dual Lite Board 4"; - compatible = "fsl,imx6dl"; - -}; - -&ecspi1 { - lcd_panel: display@0 { - compatible = "lg,lg4573"; - spi-max-frequency = <10000000>; - reg = <1>; - power-on-delay = <10>; - - display-timings { - 480x800p57 { - native-mode; - clock-frequency = <27000027>; - hactive = <480>; - vactive = <800>; - hfront-porch = <10>; - hback-porch = <59>; - hsync-len = <10>; - vback-porch = <15>; - vfront-porch = <15>; - vsync-len = <15>; - hsync-active = <1>; - vsync-active = <1>; - }; - }; - - port { - panel_in: endpoint { - remote-endpoint = <&display_out>; - }; - }; - }; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2b_csl_7.dts b/arch/arm/dts/imx6dl-aristainetos2b_csl_7.dts deleted file mode 100644 index ecf767da6c..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2b_csl_7.dts +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2 board - * - * Copyright (C) 2019 Heiko Schocher <hs@denx.de> - * Copyright (C) 2015 Heiko Schocher <hs@denx.de> - * - */ -/dts-v1/; -#include "imx6dl-aristainetos2_7.dtsi" -#include "imx6qdl-aristainetos2b_csl.dtsi" - -/ { - model = "aristainetos2b csl i.MX6 Dual Lite Board 7"; - compatible = "fsl,imx6dl"; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi deleted file mode 100644 index 052d51852b..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ or X11 -/* - * Copyright (C) 2019 Heiko Schocher <hs@denx.de> - */ - -#include <imx6qdl-aristainetos2c-u-boot.dtsi> - -&lcd_panel { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp>; - enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; - backlight = <&backlight>; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2c_4.dts b/arch/arm/dts/imx6dl-aristainetos2c_4.dts deleted file mode 100644 index 142b108ace..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2c_4.dts +++ /dev/null @@ -1,50 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2c board - * parts for 4.3 inch LG display on spi1 port1 - * - * Copyright (C) 2019 Heiko Schocher <hs@denx.de> - * - */ -/dts-v1/; - -#include "imx6dl-aristainetos2_4.dtsi" -#include "imx6qdl-aristainetos2c.dtsi" - -/ { - model = "aristainetos2c i.MX6 Dual Lite Board 4"; - compatible = "fsl,imx6dl"; - -}; - -&ecspi1 { - lcd_panel: display@0 { - compatible = "lg,lg4573"; - spi-max-frequency = <10000000>; - reg = <1>; - power-on-delay = <10>; - - display-timings { - 480x800p57 { - native-mode; - clock-frequency = <27000027>; - hactive = <480>; - vactive = <800>; - hfront-porch = <10>; - hback-porch = <59>; - hsync-len = <10>; - vback-porch = <15>; - vfront-porch = <15>; - vsync-len = <15>; - hsync-active = <1>; - vsync-active = <1>; - }; - }; - - port { - panel_in: endpoint { - remote-endpoint = <&display_out>; - }; - }; - }; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2c_7.dts b/arch/arm/dts/imx6dl-aristainetos2c_7.dts index 35435e1c10..e1f9e88291 100644 --- a/arch/arm/dts/imx6dl-aristainetos2c_7.dts +++ b/arch/arm/dts/imx6dl-aristainetos2c_7.dts @@ -11,6 +11,6 @@ #include "imx6qdl-aristainetos2c.dtsi" / { - model = "aristainetos2c i.MX6 Dual Lite Board 7"; - compatible = "fsl,imx6dl"; + model = "aristainetos2c+2d i.MX6 Dual Lite Boards 7"; + compatible = "abb,aristainetos2-imx6dl-7", "fsl,imx6dl"; }; diff --git a/arch/arm/dts/imx6dl-aristainetos2b_csl_7-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2c_cslb_7-u-boot.dtsi index 70d195ecbf..b069debc1e 100644 --- a/arch/arm/dts/imx6dl-aristainetos2b_csl_7-u-boot.dtsi +++ b/arch/arm/dts/imx6dl-aristainetos2c_cslb_7-u-boot.dtsi @@ -3,7 +3,7 @@ * Copyright (C) 2019 Heiko Schocher <hs@denx.de> */ -#include <imx6qdl-aristainetos2b_csl-u-boot.dtsi> +#include <imx6qdl-aristainetos2c_cslb-u-boot.dtsi> / { vdd_panel_reg: regulator-panel { compatible = "regulator-fixed"; diff --git a/arch/arm/dts/imx6dl-aristainetos2c_cslb_7.dts b/arch/arm/dts/imx6dl-aristainetos2c_cslb_7.dts new file mode 100644 index 0000000000..7f839ca5e2 --- /dev/null +++ b/arch/arm/dts/imx6dl-aristainetos2c_cslb_7.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0) +/* + * support for the imx6 based aristainetos2c cslb board + * + * Copyright (C) 2019 Heiko Schocher <hs@denx.de> + * Copyright (C) 2015 Heiko Schocher <hs@denx.de> + * + */ +/dts-v1/; +#include "imx6dl-aristainetos2_7.dtsi" +#include "imx6qdl-aristainetos2c_cslb.dtsi" + +/ { + model = "aristainetos2c cslb i.MX6 Dual Lite Board 7"; + compatible = "abb,aristainetos2-imx6dl-7", "fsl,imx6dl"; +}; diff --git a/arch/arm/dts/imx6q-ba16.dtsi b/arch/arm/dts/imx6q-ba16.dtsi index 7d8f61f2fd..9da2bb6e86 100644 --- a/arch/arm/dts/imx6q-ba16.dtsi +++ b/arch/arm/dts/imx6q-ba16.dtsi @@ -174,6 +174,17 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; status = "okay"; + phy-handle = <&phy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@4 { + reg = <4>; + qca,clk-out-frequency = <125000000>; + }; + }; }; &hdmi { diff --git a/arch/arm/dts/imx6q-bx50v3-uboot.dtsi b/arch/arm/dts/imx6q-bx50v3-uboot.dtsi index 01321cab78..2de3b850ec 100644 --- a/arch/arm/dts/imx6q-bx50v3-uboot.dtsi +++ b/arch/arm/dts/imx6q-bx50v3-uboot.dtsi @@ -27,7 +27,7 @@ #size-cells = <1>; vpd@0 { - reg = <0 1022>; + reg = <0 800>; }; bootcount: bootcount { diff --git a/arch/arm/dts/imx6qdl-aristainetos2-common.dtsi b/arch/arm/dts/imx6qdl-aristainetos2-common.dtsi index 2aa531b1ab..570143694e 100644 --- a/arch/arm/dts/imx6qdl-aristainetos2-common.dtsi +++ b/arch/arm/dts/imx6qdl-aristainetos2-common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0) /* - * support for the imx6 based aristainetos2 board + * support for the imx6 based aristainetos2 boards * parts common to all versions * * Copyright (C) 2019 Heiko Schocher <hs@denx.de> @@ -13,6 +13,8 @@ / { aliases { eeprom0 = &i2c_eeprom0; + eeprom1 = &i2c_eeprom1; + eeprom2 = &i2c_eeprom2; pmic0 = &i2c_pmic0; }; @@ -250,6 +252,12 @@ }; }; + i2c_eeprom2: eeprom@57{ + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + }; + rtc@68 { compatible = "st,m41t11"; reg = <0x68>; @@ -274,6 +282,19 @@ }; }; +&gpio2 { + tpm_pp { + gpio-hog; + output-low; + gpios = <17 GPIO_ACTIVE_HIGH>; + }; + tpm_reset { + gpio-hog; + output-high; + gpios = <18 GPIO_ACTIVE_HIGH>; + }; +}; + &gpio6 { spi_bus_ena { gpio-hog; diff --git a/arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi b/arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi index c713efd84c..3063f01d70 100644 --- a/arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi +++ b/arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi @@ -50,28 +50,6 @@ }; }; -&iomuxc { - pinctrl-0 = <&pinctrl_gpio &pinctrl_gpio_fix>; - u-boot,dm-pre-reloc; - - pinctrl_gpio_fix: gpiofixgrp { - /* - * usdhc2 has a levelshifter on the carrier board Rev. DV1, - * that will automatically detect the driving direction. - * During initialisation this isn't working correctly, - * which causes DAT3 to be driven low towards the SD-card. - * This causes a SD-card enetring the SPI-Mode - * and therefore getting inaccessible until next power cycle. - * As workaround we drive the DAT3 line as GPIO and set it high. - * This makes usdhc2 unusable in u-boot, but works for the - * initialisation in Linux - */ - fsl,pins = < - MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x20000 - >; - }; -}; - &gpio1 { usdhc_fix { gpio-hog; diff --git a/arch/arm/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/dts/imx6qdl-aristainetos2.dtsi deleted file mode 100644 index 788e13edad..0000000000 --- a/arch/arm/dts/imx6qdl-aristainetos2.dtsi +++ /dev/null @@ -1,244 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2 board - * - * Copyright (C) 2019 Heiko Schocher <hs@denx.de> - * Copyright (C) 2015 Heiko Schocher <hs@denx.de> - * - */ -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clock/imx6qdl-clock.h> - -#include "imx6qdl-aristainetos2-common.dtsi" - -/ { - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio>; - - LED_blue { - label = "led_blue"; - gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; - }; - - LED_green { - label = "led_green"; - gpios = <&gpio5 4 GPIO_ACTIVE_LOW>; - }; - - LED_red { - label = "led_red"; - gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; - }; - - LED_yellow { - label = "led_yellow"; - gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; - }; - - LED_ena { - label = "led_ena"; - gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&ecspi1 { - fsl,spi-num-chipselects = <3>; - cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH - &gpio4 10 GPIO_ACTIVE_HIGH - &gpio4 11 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - status = "okay"; -}; - -&ecspi4 { - fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi4>; - status = "okay"; - pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; - - flash: m25p80@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "micron,n25q128a11", "jedec,spi-nor"; - spi-max-frequency = <20000000>; - reg = <1>; - }; -}; - -&gpio7 { - sd2_driver_ena { - gpio-hog; - output-high; - gpios = <8 GPIO_ACTIVE_HIGH>; - }; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - status = "okay"; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; - status = "okay"; -}; - -&can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; - no-1-8-v; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; - no-1-8-v; - status = "okay"; -}; - -&iomuxc { - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x100b1 /* SS0# */ - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 /* SS1# */ - MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 /* SS2# */ - >; - }; - - pinctrl_ecspi4: ecspi4grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 - MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 - MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */ - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */ - MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0 /* WP pin */ - >; - }; - - pinctrl_gpio: gpiogrp { - fsl,pins = < - /* led enable */ - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0 - /* LCD power enable */ - MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x4001b0b0 - /* led yellow */ - MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x4001b0b0 - /* led red */ - MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x4001b0b0 - /* led green */ - MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x4001b0b0 - /* led blue */ - MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x4001b0b0 - /* Profibus IRQ */ - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 - /* FPGA IRQ currently unused*/ - MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 - /* Display reset because of clock failure */ - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b0 - /* spi bus #2 SS driver enable */ - MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0 - /* RST_LOC# PHY reset input (has pull-down!)*/ - MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x4001b0b0 - /* USB_OTG_ID = GPIO1_24*/ - MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x4001b0b0 - /* Touchscreen IRQ */ - MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 - /* PCIe reset */ - MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x4001b0b0 - >; - }; - - pinctrl_gpmi_nand: gpmi-nand { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; - - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0 - MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0 - >; - }; - - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0 - MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 - /* SD1 card detect input */ - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 - /* SD1 write protect input */ - MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x71 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x71 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71 - /* SD2 level shifter output enable */ - MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x4001b0b0 - /* SD2 card detect input */ - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 - /* SD2 write protect input */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 - >; - }; -}; diff --git a/arch/arm/dts/imx6qdl-aristainetos2b-u-boot.dtsi b/arch/arm/dts/imx6qdl-aristainetos2b-u-boot.dtsi deleted file mode 100644 index 88826a2634..0000000000 --- a/arch/arm/dts/imx6qdl-aristainetos2b-u-boot.dtsi +++ /dev/null @@ -1,77 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ or X11 -/* - * Copyright (C) 2019 Heiko Schocher <hs@denx.de> - */ - -/ { - chosen { - u-boot,dm-pre-reloc; - stdout-path = &uart2; - }; - - wdt-reboot { - compatible = "wdt-reboot"; - wdt = <&wdog1>; - }; -}; - -&uart2 { - u-boot,dm-pre-reloc; -}; - -&pinctrl_gpio { - u-boot,dm-pre-reloc; -}; - -&pinctrl_uart2 { - u-boot,dm-pre-reloc; -}; - -&iomuxc { - u-boot,dm-pre-reloc; -}; - -&aips2 { - u-boot,dm-pre-reloc; -}; - -&backlight { - pwms = <&pwm1 0 300000>; - default-brightness-level = <2>; -}; - -/* - * allow switching write protect / reset pin by gpio, - * because "pinctrl-assert-gpios" from &ecspi1 isn't handled by u-boot - */ -&gpio2 { - u-boot,dm-pre-reloc; - - wp_spi_nor { - gpio-hog; - output-high; - gpios = <15 GPIO_ACTIVE_HIGH>; - }; - - reset_spi_nor { - gpio-hog; - output-high; - gpios = <28 GPIO_ACTIVE_HIGH>; - }; -}; - -&gpio4 { - u-boot,dm-pre-reloc; -}; - -&ecspi1 { - u-boot,dm-pre-reloc; -}; - -&flash { - u-boot,dm-pre-reloc; -}; - -&pinctrl_ecspi1 { - u-boot,dm-pre-reloc; -}; diff --git a/arch/arm/dts/imx6qdl-aristainetos2b.dtsi b/arch/arm/dts/imx6qdl-aristainetos2b.dtsi deleted file mode 100644 index 7d92ea2af7..0000000000 --- a/arch/arm/dts/imx6qdl-aristainetos2b.dtsi +++ /dev/null @@ -1,266 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2b board - * - * Copyright (C) 2019 Heiko Schocher <hs@denx.de> - * Copyright (C) 2015 Heiko Schocher <hs@denx.de> - * - */ -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clock/imx6qdl-clock.h> - -#include "imx6qdl-aristainetos2-common.dtsi" - -/ { - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio>; - - LED_blue { - label = "led_blue"; - gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; - }; - - LED_green { - label = "led_green"; - gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; - }; - - LED_red { - label = "led_red"; - gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; - }; - - LED_yellow { - label = "led_yellow"; - gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; - }; - - LED_ena { - label = "led_ena"; - gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&ecspi1 { - fsl,spi-num-chipselects = <3>; - cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH - &gpio4 10 GPIO_ACTIVE_HIGH - &gpio4 11 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - status = "okay"; - pinctrl-assert-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; - pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; - - flash: m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "micron,n25q128a11", "jedec,spi-nor"; - spi-max-frequency = <20000000>; - reg = <0>; - }; -}; - -&ecspi4 { - fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi4>; - status = "okay"; -}; - -&i2c1 { - tpm@20 { - compatible = "infineon,slb9645tt"; - reg = <0x20>; - }; -}; - -&gpio7 { - sd2_driver_ena { - gpio-hog; - output-high; - gpios = <8 GPIO_ACTIVE_HIGH>; - }; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - status = "okay"; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; - status = "okay"; -}; - -&can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>; - no-1-8-v; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - /* - * comment out this line to make the WiFi Eval-Module work in - * SD-Slot2, and add line: - * broken-cd; - * causes 6% CPU load if no WiFi module installed (polling) - */ - cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; - no-1-8-v; - status = "okay"; -}; - -&iomuxc { - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - /* SS0# */ - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1 - /* SS1# */ - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 - /* SS2# */ - MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 - /* WP pin NOR Flash */ - MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0 - /* Flash nReset */ - MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x4001b0b0 - >; - }; - - pinctrl_ecspi4: ecspi4grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 - MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 - MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */ - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */ - >; - }; - - pinctrl_gpio: gpiogrp { - fsl,pins = < - /* led enable */ - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0 - /* LCD power enable */ - MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x4001b0b0 - /* led yellow */ - MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x4001b0b0 - /* led red */ - MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x4001b0b0 - /* led green */ - MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x4001b0b0 - /* led blue */ - MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x4001b0b0 - /* Profibus IRQ */ - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 - /* FPGA IRQ currently unused*/ - MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 - /* Display reset because of clock failure */ - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b0 - /* spi bus #2 SS driver enable */ - MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0 - /* RST_LOC# PHY reset input (has pull-down!)*/ - MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x4001b0b0 - /* Touchscreen IRQ */ - MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 - /* PCIe reset */ - MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x4001b0b0 - /* make sure pin is GPIO and not ENET_REF_CLK */ - MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001a0b0 - /* SD2 level shifter output enable / SD2 Reset# */ - MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x4001b0b0 - >; - }; - - pinctrl_gpmi_nand: gpmi-nand { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; - - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0 - MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0 - >; - }; - - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0 - MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 - MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 - /* SD1 card detect input */ - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 - /* SD1 write protect input */ - MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x71 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x71 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71 - /* SD2 card detect input */ - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 - /* SD2 write protect input */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 - >; - }; -}; diff --git a/arch/arm/dts/imx6qdl-aristainetos2c.dtsi b/arch/arm/dts/imx6qdl-aristainetos2c.dtsi index ba13d55f41..70c0177d29 100644 --- a/arch/arm/dts/imx6qdl-aristainetos2c.dtsi +++ b/arch/arm/dts/imx6qdl-aristainetos2c.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0) /* - * support for the imx6 based aristainetos2c board + * support for the imx6 based aristainetos2c+2d boards * * Copyright (C) 2019 Heiko Schocher <hs@denx.de> * Copyright (C) 2015 Heiko Schocher <hs@denx.de> @@ -79,6 +79,14 @@ }; }; +&gpio7 { + eMMC_reset { + gpio-hog; + output-high; + gpios = <8 GPIO_ACTIVE_HIGH>; + }; +}; + &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; @@ -172,6 +180,8 @@ MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x4001b0b0 /* TPM Reset */ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x4001b0b0 + /* eMMC Reset# */ + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x4001b0b0 >; }; diff --git a/arch/arm/dts/imx6qdl-aristainetos2b_csl-u-boot.dtsi b/arch/arm/dts/imx6qdl-aristainetos2c_cslb-u-boot.dtsi index 8c2ed70075..8c2ed70075 100644 --- a/arch/arm/dts/imx6qdl-aristainetos2b_csl-u-boot.dtsi +++ b/arch/arm/dts/imx6qdl-aristainetos2c_cslb-u-boot.dtsi diff --git a/arch/arm/dts/imx6qdl-aristainetos2b_csl.dtsi b/arch/arm/dts/imx6qdl-aristainetos2c_cslb.dtsi index fa4dadefb6..c3724ec86f 100644 --- a/arch/arm/dts/imx6qdl-aristainetos2b_csl.dtsi +++ b/arch/arm/dts/imx6qdl-aristainetos2c_cslb.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0) /* - * support for the imx6 based aristainetos2b-csl board + * support for the imx6 based aristainetos2c-cslb board * * Copyright (C) 2019 Heiko Schocher <hs@denx.de> * Copyright (C) 2015 Heiko Schocher <hs@denx.de> @@ -104,19 +104,13 @@ }; &gpio7 { - wlan_reset { + eMMC_reset { gpio-hog; output-high; gpios = <8 GPIO_ACTIVE_HIGH>; }; }; -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - status = "okay"; -}; - &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -127,7 +121,9 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <8>; no-1-8-v; + non-removable; status = "okay"; }; @@ -190,31 +186,15 @@ MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x4001b0b0 /* make sure pin is GPIO and not ENET_REF_CLK */ MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001a0b0 - /* WLAN Module Reset# */ + /* TPM PP */ + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x4001b0b0 + /* TPM Reset */ + MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x4001b0b0 + /* eMMC Reset# */ MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x4001b0b0 >; }; - pinctrl_gpmi_nand: gpmi-nand { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; - pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 @@ -237,12 +217,16 @@ pinctrl_usdhc2: usdhc2grp { fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x71 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x71 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71 + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059 + MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059 + MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059 + MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059 >; }; }; diff --git a/arch/arm/dts/imx6ull-dart-6ul.dtsi b/arch/arm/dts/imx6ull-dart-6ul.dtsi index e96669f493..805a382da9 100644 --- a/arch/arm/dts/imx6ull-dart-6ul.dtsi +++ b/arch/arm/dts/imx6ull-dart-6ul.dtsi @@ -14,6 +14,10 @@ chosen { stdout-path = &uart1; }; + + aliases { + eeprom0 = &eeprom_som; + }; }; &fec1 { @@ -52,6 +56,10 @@ }; }; +&gpio1 { + u-boot,dm-pre-reloc; +}; + &gpmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; @@ -96,10 +104,13 @@ scl-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; sda-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; status = "okay"; + u-boot,dm-pre-reloc; - eeprom@50 { - compatible = "cat,24c32"; + eeprom_som: eeprom@50 { + u-boot,dm-pre-reloc; + compatible = "atmel,24c04"; reg = <0x50>; + status = "okay"; }; }; @@ -205,6 +216,7 @@ }; pinctrl_i2c2: i2cgrp { + u-boot,dm-pre-reloc; fsl,pins = < MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 @@ -212,6 +224,7 @@ }; pinctrl_i2c2_gpio: i2c2grp_gpio { + u-boot,dm-pre-reloc; fsl,pins = < MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b8b0 MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x1b8b0 diff --git a/arch/arm/dts/imx8mm-beacon-baseboard.dtsi b/arch/arm/dts/imx8mm-beacon-baseboard.dtsi index baa5f997d0..d6b9dedd16 100644 --- a/arch/arm/dts/imx8mm-beacon-baseboard.dtsi +++ b/arch/arm/dts/imx8mm-beacon-baseboard.dtsi @@ -10,19 +10,19 @@ led0 { label = "gen_led0"; gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>; - default-state = "none"; + default-state = "off"; }; led1 { label = "gen_led1"; gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>; - default-state = "none"; + default-state = "off"; }; led2 { label = "gen_led2"; gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>; - default-state = "none"; + default-state = "off"; }; led3 { @@ -70,7 +70,7 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_espi2>; - cs-gpios = <&gpio5 9 0>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; status = "okay"; eeprom@0 { @@ -210,7 +210,7 @@ >; }; - pinctrl_pcal6414: pcal6414-gpio { + pinctrl_pcal6414: pcal6414-gpiogrp { fsl,pins = < MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 >; @@ -240,7 +240,7 @@ >; }; - pinctrl_usdhc2_gpio: usdhc2grpgpio { + pinctrl_usdhc2_gpio: usdhc2gpiogrp { fsl,pins = < MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x41 MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 @@ -259,7 +259,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 @@ -271,7 +271,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 diff --git a/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi b/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi index fc1aebb2fe..6d80a529ae 100644 --- a/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi @@ -37,6 +37,10 @@ /delete-property/ assigned-clock-rates; }; +®_usdhc2_vmmc { + u-boot,off-on-delay-us = <20000>; +}; + &fec1 { phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/dts/imx8mm-beacon-som.dtsi b/arch/arm/dts/imx8mm-beacon-som.dtsi index 801bd02eae..b88c3c99b0 100644 --- a/arch/arm/dts/imx8mm-beacon-som.dtsi +++ b/arch/arm/dts/imx8mm-beacon-som.dtsi @@ -24,6 +24,26 @@ cpu-supply = <&buck2_reg>; }; +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; @@ -52,9 +72,10 @@ pmic@4b { compatible = "rohm,bd71847"; reg = <0x4b>; + pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio1>; - interrupts = <3 GPIO_ACTIVE_LOW>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; rohm,reset-snvs-powered; regulators { @@ -116,7 +137,7 @@ ldo1_reg: LDO1 { regulator-name = "ldo1"; - regulator-min-microvolt = <3000000>; + regulator-min-microvolt = <1600000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; @@ -124,7 +145,7 @@ ldo2_reg: LDO2 { regulator-name = "ldo2"; - regulator-min-microvolt = <900000>; + regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; regulator-boot-on; regulator-always-on; @@ -164,7 +185,7 @@ status = "okay"; eeprom@50 { - compatible = "microchip, at24c64d", "atmel,24c64"; + compatible = "microchip,24c64", "atmel,24c64"; pagesize = <32>; read-only; /* Manufacturing EEPROM programmed at factory */ reg = <0x50>; @@ -190,6 +211,7 @@ host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; clocks = <&osc_32k>; + max-speed = <4000000>; clock-names = "extclk"; }; }; @@ -270,9 +292,9 @@ >; }; - pinctrl_pmic: pmicirq { + pinctrl_pmic: pmicirqgrp { fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 >; }; @@ -289,7 +311,7 @@ >; }; - pinctrl_usdhc1_gpio: usdhc1grpgpio { + pinctrl_usdhc1_gpio: usdhc1gpiogrp { fsl,pins = < MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41 >; @@ -306,7 +328,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 @@ -317,7 +339,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 @@ -344,7 +366,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = < MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 @@ -360,7 +382,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = < MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 diff --git a/arch/arm/dts/imx8mm-evk-u-boot.dtsi b/arch/arm/dts/imx8mm-evk-u-boot.dtsi index b5c12105a9..e843a5648e 100644 --- a/arch/arm/dts/imx8mm-evk-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-evk-u-boot.dtsi @@ -46,6 +46,10 @@ u-boot,dm-spl; }; +®_usdhc2_vmmc { + u-boot,off-on-delay-us = <20000>; +}; + &pinctrl_reg_usdhc2_vmmc { u-boot,dm-spl; }; @@ -96,10 +100,14 @@ &usdhc2 { u-boot,dm-spl; + sd-uhs-sdr104; + sd-uhs-ddr50; }; &usdhc3 { u-boot,dm-spl; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; }; &i2c1 { diff --git a/arch/arm/dts/imx8mm-verdin-u-boot.dtsi b/arch/arm/dts/imx8mm-verdin-u-boot.dtsi index fe6bb9bf03..249b0f8f66 100644 --- a/arch/arm/dts/imx8mm-verdin-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-verdin-u-boot.dtsi @@ -2,7 +2,6 @@ /* * Copyright 2020 Toradex */ - / { wdt-reboot { compatible = "wdt-reboot"; @@ -90,11 +89,11 @@ u-boot,dm-spl; }; -&{/soc@0/bus@30800000/i2c@30a20000/pmic@4b} { +&{/soc@0/bus@30800000/i2c@30a20000/pmic} { u-boot,dm-spl; }; -&{/soc@0/bus@30800000/i2c@30a20000/pmic@4b/regulators} { +&{/soc@0/bus@30800000/i2c@30a20000/pmic/regulators} { u-boot,dm-spl; }; diff --git a/arch/arm/dts/imx8mm-verdin.dts b/arch/arm/dts/imx8mm-verdin.dts index 1c67c08c88..fb0756d6e1 100644 --- a/arch/arm/dts/imx8mm-verdin.dts +++ b/arch/arm/dts/imx8mm-verdin.dts @@ -203,115 +203,123 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic@4b { - compatible = "rohm,bd71840", "rohm,bd71837"; - bd71837,pmic-buck2-uses-i2c-dvs; - bd71837,pmic-buck2-dvs-voltage = <1000000>, <900000>, <0>; /* VDD_ARM: Run-Idle */ - gpio_intr = <&gpio1 3 GPIO_ACTIVE_LOW>; - /* PMIC BD71837 PMIC_nINT GPIO1_IO3 */ + /* Assembled on V1.1 HW and later */ + pmic { + reg = <0x25>; + u-boot,dm-spl; + compatible = "nxp,pca9450a"; + /* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */ pinctrl-0 = <&pinctrl_pmic>; - reg = <0x4b>; - - gpo { - rohm,drv = <0x0C>; /* 0b0000_1100 all gpos with cmos output mode */ - }; + gpio_intr = <&gpio1 3 GPIO_ACTIVE_LOW>; regulators { - buck1_reg: BUCK1 { - regulator-always-on; - regulator-boot-on; + u-boot,dm-spl; + #address-cells = <1>; + #size-cells = <0>; + + pca9450,pmic-buck2-uses-i2c-dvs; + /* Run/Standby voltage */ + pca9450,pmic-buck2-dvs-voltage = <950000>, <850000>; + + buck1_reg: regulator@0 { + reg = <0>; regulator-compatible = "buck1"; - regulator-max-microvolt = <1300000>; - regulator-min-microvolt = <700000>; - regulator-ramp-delay = <1250>; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; }; - buck2_reg: BUCK2 { - regulator-always-on; - regulator-boot-on; + buck2_reg: regulator@1 { + reg = <1>; regulator-compatible = "buck2"; - regulator-max-microvolt = <1300000>; - regulator-min-microvolt = <700000>; - regulator-ramp-delay = <1250>; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; }; - buck5_reg: BUCK5 { - regulator-always-on; + buck3_reg: regulator@2 { + reg = <2>; + regulator-compatible = "buck3"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; regulator-boot-on; - regulator-compatible = "buck5"; - regulator-max-microvolt = <1350000>; - regulator-min-microvolt = <700000>; + regulator-always-on; }; - buck6_reg: BUCK6 { - regulator-always-on; + buck4_reg: regulator@3 { + reg = <3>; + regulator-compatible = "buck4"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; regulator-boot-on; - regulator-compatible = "buck6"; - regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <3000000>; + regulator-always-on; }; - buck7_reg: BUCK7 { - regulator-always-on; + buck5_reg: regulator@4 { + reg = <4>; + regulator-compatible = "buck5"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; regulator-boot-on; - regulator-compatible = "buck7"; - regulator-max-microvolt = <1995000>; - regulator-min-microvolt = <1605000>; + regulator-always-on; }; - buck8_reg: BUCK8 { - regulator-always-on; + buck6_reg: regulator@5 { + reg = <5>; + regulator-compatible = "buck6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; regulator-boot-on; - regulator-compatible = "buck8"; - regulator-max-microvolt = <1400000>; - regulator-min-microvolt = <800000>; + regulator-always-on; }; - ldo1_reg: LDO1 { - regulator-always-on; - regulator-boot-on; + ldo1_reg: regulator@6 { + reg = <6>; regulator-compatible = "ldo1"; + regulator-min-microvolt = <1600000>; regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; }; - ldo2_reg: LDO2 { - regulator-always-on; - regulator-boot-on; + ldo2_reg: regulator@7 { + reg = <7>; regulator-compatible = "ldo2"; - regulator-max-microvolt = <900000>; - regulator-min-microvolt = <900000>; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; }; - ldo3_reg: LDO3 { - regulator-always-on; - regulator-boot-on; + ldo3_reg: regulator@8 { + reg = <8>; regulator-compatible = "ldo3"; + regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; }; - ldo4_reg: LDO4 { - regulator-always-on; - regulator-boot-on; + ldo4_reg: regulator@9 { + reg = <9>; regulator-compatible = "ldo4"; - regulator-max-microvolt = <1800000>; - regulator-min-microvolt = <900000>; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; }; - ldo5_reg: LDO5 { + ldo5_reg: regulator@10 { + reg = <10>; regulator-compatible = "ldo5"; + regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <3300000>; }; - ldo6_reg: LDO6 { - regulator-always-on; - regulator-boot-on; - regulator-compatible = "ldo6"; - regulator-max-microvolt = <1800000>; - regulator-min-microvolt = <900000>; - }; }; }; @@ -321,12 +329,6 @@ reg = <0x32>; }; - adc@34 { - compatible = "maxim,max11607"; - reg = <0x34>; - vcc-supply = <&ldo5_reg>; - }; - eeprom_module: eeprom@50 { compatible = "st,24c02", "atmel,24c02", "i2c-eeprom"; pagesize = <16>; diff --git a/arch/arm/dts/imx8mm.dtsi b/arch/arm/dts/imx8mm.dtsi index 1e5e11592f..05ee062548 100644 --- a/arch/arm/dts/imx8mm.dtsi +++ b/arch/arm/dts/imx8mm.dtsi @@ -18,10 +18,18 @@ aliases { ethernet0 = &fec1; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; @@ -29,14 +37,6 @@ spi0 = &ecspi1; spi1 = &ecspi2; spi2 = &ecspi3; - mmc0 = &usdhc1; - mmc1 = &usdhc2; - mmc2 = &usdhc3; - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - gpio4 = &gpio5; }; cpus { @@ -68,6 +68,7 @@ nvmem-cells = <&cpu_speed_grade>; nvmem-cell-names = "speed_grade"; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_1: cpu@1 { @@ -80,6 +81,7 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_2: cpu@2 { @@ -92,6 +94,7 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_3: cpu@3 { @@ -104,6 +107,7 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_L2: l2-cache0 { @@ -125,7 +129,7 @@ opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; - opp-microvolt = <900000>; + opp-microvolt = <950000>; opp-supported-hw = <0xc>, <0x7>; clock-latency-ns = <150000>; opp-suspend; @@ -204,6 +208,38 @@ arm,no-tick-in-suspend; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tmu>; + trips { + cpu_alert0: trip0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit0: trip1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + usbphynop1: usbphynop1 { compatible = "usb-nop-xceiv"; clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; @@ -227,12 +263,14 @@ ranges = <0x0 0x0 0x0 0x3e000000>; aips1: bus@30000000 { - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30000000 0x400000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x30000000 0x30000000 0x400000>; sai1: sai@30010000 { + #sound-dai-cells = <0>; compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; reg = <0x30010000 0x10000>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; @@ -246,6 +284,7 @@ }; sai2: sai@30020000 { + #sound-dai-cells = <0>; compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; reg = <0x30020000 0x10000>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; @@ -273,6 +312,7 @@ }; sai5: sai@30050000 { + #sound-dai-cells = <0>; compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; reg = <0x30050000 0x10000>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; @@ -286,6 +326,7 @@ }; sai6: sai@30060000 { + #sound-dai-cells = <0>; compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; reg = <0x30060000 0x10000>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; @@ -363,6 +404,13 @@ gpio-ranges = <&iomuxc 0 119 30>; }; + tmu: tmu@30260000 { + compatible = "fsl,imx8mm-tmu"; + reg = <0x30260000 0x10000>; + clocks = <&clk IMX8MM_CLK_TMU_ROOT>; + #thermal-sensor-cells = <0>; + }; + wdog1: watchdog@30280000 { compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; reg = <0x30280000 0x10000>; @@ -419,7 +467,7 @@ reg = <0x30340000 0x10000>; }; - ocotp: ocotp-ctrl@30350000 { + ocotp: efuse@30350000 { compatible = "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>; @@ -455,6 +503,8 @@ compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SNVS_ROOT>; + clock-names = "snvs-pwrkey"; linux,keycode = <KEY_POWER>; wakeup-source; status = "disabled"; @@ -469,16 +519,20 @@ <&clk_ext3>, <&clk_ext4>; clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", "clk_ext3", "clk_ext4"; - assigned-clocks = <&clk IMX8MM_CLK_NOC>, + assigned-clocks = <&clk IMX8MM_CLK_A53_SRC>, + <&clk IMX8MM_CLK_A53_CORE>, + <&clk IMX8MM_CLK_NOC>, <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_IPG_AUDIO_ROOT>, <&clk IMX8MM_SYS_PLL3>, <&clk IMX8MM_VIDEO_PLL1>, <&clk IMX8MM_AUDIO_PLL1>, <&clk IMX8MM_AUDIO_PLL2>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>, + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>, + <&clk IMX8MM_ARM_PLL_OUT>, + <&clk IMX8MM_SYS_PLL3_OUT>, <&clk IMX8MM_SYS_PLL1_800M>; - assigned-clock-rates = <0>, + assigned-clock-rates = <0>, <0>, <0>, <400000000>, <400000000>, <750000000>, @@ -496,7 +550,8 @@ }; aips2: bus@30400000 { - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30400000 0x400000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x30400000 0x30400000 0x400000>; @@ -555,10 +610,12 @@ }; aips3: bus@30800000 { - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30800000 0x400000>; #address-cells = <1>; #size-cells = <1>; - ranges = <0x30800000 0x30800000 0x400000>; + ranges = <0x30800000 0x30800000 0x400000>, + <0x8000000 0x8000000 0x10000000>; ecspi1: spi@30820000 { compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; @@ -718,6 +775,14 @@ status = "disabled"; }; + mu: mailbox@30aa0000 { + compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu"; + reg = <0x30aa0000 0x10000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_MU_ROOT>; + #mbox-cells = <2>; + }; + usdhc1: mmc@30b40000 { compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b40000 0x10000>; @@ -760,6 +825,19 @@ status = "disabled"; }; + flexspi: spi@30bb0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,imx8mm-fspi"; + reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_QSPI_ROOT>, + <&clk IMX8MM_CLK_QSPI_ROOT>; + clock-names = "fspi", "fspi_en"; + status = "disabled"; + }; + sdma1: dma-controller@30bd0000 { compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma"; reg = <0x30bd0000 0x10000>; @@ -776,7 +854,8 @@ reg = <0x30be0000 0x10000>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MM_CLK_ENET1_ROOT>, <&clk IMX8MM_CLK_ENET1_ROOT>, <&clk IMX8MM_CLK_ENET_TIMER>, @@ -800,7 +879,8 @@ }; aips4: bus@32c00000 { - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x32c00000 0x400000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x32c00000 0x32c00000 0x400000>; @@ -896,7 +976,6 @@ ddr-pmu@3d800000 { compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu"; reg = <0x3d800000 0x400000>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi index 4419679d4c..025090fff4 100644 --- a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi +++ b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi @@ -47,6 +47,10 @@ u-boot,dm-spl; }; +®_usdhc2_vmmc { + u-boot,off-on-delay-us = <20000>; +}; + &pinctrl_uart2 { u-boot,dm-spl; }; @@ -93,10 +97,14 @@ &usdhc2 { u-boot,dm-spl; + sd-uhs-sdr104; + sd-uhs-ddr50; }; &usdhc3 { u-boot,dm-spl; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; }; &wdog1 { diff --git a/arch/arm/dts/imx8mp-evk-u-boot.dtsi b/arch/arm/dts/imx8mp-evk-u-boot.dtsi index 24a93ac2d6..4f00b5a3a9 100644 --- a/arch/arm/dts/imx8mp-evk-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-evk-u-boot.dtsi @@ -49,6 +49,10 @@ }; ®_usdhc2_vmmc { + u-boot,off-on-delay-us = <20000>; +}; + +®_usdhc2_vmmc { u-boot,dm-spl; }; @@ -122,10 +126,14 @@ &usdhc2 { u-boot,dm-spl; + sd-uhs-sdr104; + sd-uhs-ddr50; }; &usdhc3 { u-boot,dm-spl; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; }; &wdog1 { diff --git a/arch/arm/dts/imx8mq-evk-u-boot.dtsi b/arch/arm/dts/imx8mq-evk-u-boot.dtsi new file mode 100644 index 0000000000..44af663727 --- /dev/null +++ b/arch/arm/dts/imx8mq-evk-u-boot.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +®_usdhc2_vmmc { + u-boot,off-on-delay-us = <20000>; +}; + +&usdhc1 { + mmc-hs400-1_8v; +}; + +&usdhc2 { + sd-uhs-sdr104; + sd-uhs-ddr50; +}; diff --git a/arch/arm/dts/imx8mq-phanbell-u-boot.dtsi b/arch/arm/dts/imx8mq-phanbell-u-boot.dtsi new file mode 100644 index 0000000000..4712cf6a44 --- /dev/null +++ b/arch/arm/dts/imx8mq-phanbell-u-boot.dtsi @@ -0,0 +1,5 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +®_usdhc2_vmmc { + u-boot,off-on-delay-us = <20000>; +}; diff --git a/arch/arm/dts/imx8qm-rom7720-a1.dts b/arch/arm/dts/imx8qm-rom7720-a1.dts index 5f9ac955ed..d1f2fff869 100644 --- a/arch/arm/dts/imx8qm-rom7720-a1.dts +++ b/arch/arm/dts/imx8qm-rom7720-a1.dts @@ -293,7 +293,7 @@ &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy0>; fsl,ar8031-phy-fixup; fsl,magic-packet; @@ -318,7 +318,7 @@ &fec2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec2>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy1>; fsl,ar8031-phy-fixup; fsl,magic-packet; diff --git a/arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi b/arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi index c431988075..fbcc8287c5 100644 --- a/arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi +++ b/arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi @@ -11,3 +11,7 @@ snps,reset-delays-us = <0 10000 1000000>; snps,reset-active-low; }; + +&tflash_vdd { + gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; +}; diff --git a/arch/arm/dts/sam9x60.dtsi b/arch/arm/dts/sam9x60.dtsi index 7f3eae3f5d..007646fcb4 100644 --- a/arch/arm/dts/sam9x60.dtsi +++ b/arch/arm/dts/sam9x60.dtsi @@ -153,12 +153,18 @@ sdhci0 { pinctrl_sdhci0: sdhci0 { atmel,pins = - <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_DRIVE_STRENGTH_DEFAULT /* PA17 CK periph A with pullup */ - AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 CMD periph A with pullup */ - AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA15 DAT0 periph A */ - AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 DAT1 periph A with pullup */ - AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 DAT2 periph A with pullup */ - AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 DAT3 periph A with pullup */ + <AT91_PIOA 17 AT91_PERIPH_A + (AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA17 CK periph A with pullup */ + AT91_PIOA 16 AT91_PERIPH_A + (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA16 CMD periph A with pullup */ + AT91_PIOA 15 AT91_PERIPH_A + (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA15 DAT0 periph A */ + AT91_PIOA 18 AT91_PERIPH_A + (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA18 DAT1 periph A with pullup */ + AT91_PIOA 19 AT91_PERIPH_A + (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA19 DAT2 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A + (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>; /* PA20 DAT3 periph A with pullup */ }; }; }; diff --git a/arch/arm/dts/socfpga.dtsi b/arch/arm/dts/socfpga.dtsi index eda558f2fe..ff79d335ac 100644 --- a/arch/arm/dts/socfpga.dtsi +++ b/arch/arm/dts/socfpga.dtsi @@ -804,7 +804,8 @@ }; spi0: spi@fff00000 { - compatible = "snps,dw-apb-ssi"; + compatible = "altr,socfpga-spi", "snps,dw-apb-ssi-3.20", + "snps,dw-apb-ssi"; #address-cells = <1>; #size-cells = <0>; reg = <0xfff00000 0x1000>; @@ -816,7 +817,8 @@ }; spi1: spi@fff01000 { - compatible = "snps,dw-apb-ssi"; + compatible = "altr,socfpga-spi", "snps,dw-apb-ssi-3.20", + "snps,dw-apb-ssi"; #address-cells = <1>; #size-cells = <0>; reg = <0xfff01000 0x1000>; diff --git a/arch/arm/dts/socfpga_agilex.dtsi b/arch/arm/dts/socfpga_agilex.dtsi index 179b4d5591..c3ead2d72b 100644 --- a/arch/arm/dts/socfpga_agilex.dtsi +++ b/arch/arm/dts/socfpga_agilex.dtsi @@ -366,7 +366,8 @@ }; spi0: spi@ffda4000 { - compatible = "snps,dw-apb-ssi"; + compatible = "intel,agilex-spi", + "snps,dw-apb-ssi-4.00a", "snps,dw-apb-ssi"; #address-cells = <1>; #size-cells = <0>; reg = <0xffda4000 0x1000>; @@ -379,7 +380,8 @@ }; spi1: spi@ffda5000 { - compatible = "snps,dw-apb-ssi"; + compatible = "intel,agilex-spi", + "snps,dw-apb-ssi-4.00a", "snps,dw-apb-ssi"; #address-cells = <1>; #size-cells = <0>; reg = <0xffda5000 0x1000>; diff --git a/arch/arm/dts/socfpga_arria10.dtsi b/arch/arm/dts/socfpga_arria10.dtsi index a598c75542..bab34ab56c 100644 --- a/arch/arm/dts/socfpga_arria10.dtsi +++ b/arch/arm/dts/socfpga_arria10.dtsi @@ -604,7 +604,8 @@ }; spi0: spi@ffda4000 { - compatible = "snps,dw-apb-ssi"; + compatible = "altr,socfpga-arria10-spi", + "snps,dw-apb-ssi-3.22a", "snps,dw-apb-ssi"; #address-cells = <1>; #size-cells = <0>; reg = <0xffda4000 0x100>; @@ -617,7 +618,8 @@ }; spi1: spi@ffda5000 { - compatible = "snps,dw-apb-ssi"; + compatible = "altr,socfpga-arria10-spi", + "snps,dw-apb-ssi-3.22a", "snps,dw-apb-ssi"; #address-cells = <1>; #size-cells = <0>; reg = <0xffda5000 0x100>; diff --git a/arch/arm/dts/socfpga_stratix10.dtsi b/arch/arm/dts/socfpga_stratix10.dtsi index cb799bc551..7a7777202c 100755 --- a/arch/arm/dts/socfpga_stratix10.dtsi +++ b/arch/arm/dts/socfpga_stratix10.dtsi @@ -268,7 +268,8 @@ }; spi0: spi@ffda4000 { - compatible = "snps,dw-apb-ssi"; + compatible = "intel,stratix10-spi", + "snps,dw-apb-ssi-4.00a", "snps,dw-apb-ssi"; #address-cells = <1>; #size-cells = <0>; reg = <0xffda4000 0x1000>; @@ -281,7 +282,8 @@ }; spi1: spi@ffda5000 { - compatible = "snps,dw-apb-ssi"; + compatible = "intel,stratix10-spi", + "snps,dw-apb-ssi-4.00a", "snps,dw-apb-ssi"; #address-cells = <1>; #size-cells = <0>; reg = <0xffda5000 0x1000>; diff --git a/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts b/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts index 5a237a3b7b..e8508aa4d5 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts +++ b/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts @@ -105,9 +105,18 @@ * On DRC02, the SoM does not have SDIO WiFi. The pins * are used for on-board microSD slot instead. */ - /delete-property/broken-cd; - cd-gpios = <&gpioi 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; + cd-gpios = <&gpioi 10 GPIO_ACTIVE_HIGH>; disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + mmc-ddr-3_3v; + status = "okay"; }; &spi1 { diff --git a/arch/arm/dts/stm32mp15xx-dhcom.dtsi b/arch/arm/dts/stm32mp15xx-dhcom.dtsi index f022d8395c..dafcce4323 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom.dtsi @@ -333,12 +333,25 @@ disable-wp; st,sig-dir; st,neg-edge; - st,use-ckin; bus-width = <4>; vmmc-supply = <&vdd_sd>; status = "okay"; }; +&sdmmc1_b4_pins_a { + /* + * SD bus pull-up resistors: + * - optional on SoMs with SD voltage translator + * - mandatory on SoMs without SD voltage translator + */ + pins1 { + bias-pull-up; + }; + pins2 { + bias-pull-up; + }; +}; + &sdmmc2 { pinctrl-names = "default"; pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; diff --git a/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts b/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts index 88f25d89b2..9b5dda318e 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts +++ b/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts @@ -192,7 +192,8 @@ }; &usbotg_hs { - dr_mode = "peripheral"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; phys = <&usbphyc_port1 0>; phy-names = "usb2-phy"; status = "okay"; diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index e13f4d83e6..a9bd8b24fd 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright 2016-2018 NXP + * Copyright 2016-2018, 2020 NXP * Copyright 2015, Freescale Semiconductor */ @@ -179,8 +179,8 @@ #define SYS_FSL_OCRAM_SPACE_SIZE 0x00200000 /* 2M space */ #define CONFIG_SYS_FSL_OCRAM_SIZE 0x00020000 /* Real size 128K */ -/* LX2160A Soc Support */ -#elif defined(CONFIG_ARCH_LX2160A) +/* LX2160A/LX2162A Soc Support */ +#elif defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) #define TZPC_BASE 0x02200000 #define TZPCDECPROT_0_SET_BASE (TZPC_BASE + 0x804) #if !defined(CONFIG_DM_I2C) diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h index 7759acdb8f..4335aa0ec2 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright 2017-2018 NXP + * Copyright 2017-2018, 2020 NXP * Copyright 2014-2015, Freescale Semiconductor */ @@ -53,7 +53,7 @@ #define CONFIG_SYS_FSL_WRIOP1_SIZE 0x100000000 #define CONFIG_SYS_FSL_AIOP1_BASE 0x4b00000000 #define CONFIG_SYS_FSL_AIOP1_SIZE 0x100000000 -#ifndef CONFIG_ARCH_LX2160A +#if !defined(CONFIG_ARCH_LX2160A) || !defined(CONFIG_ARCH_LX2162) #define CONFIG_SYS_FSL_PEBUF_BASE 0x4c00000000 #else #define CONFIG_SYS_FSL_PEBUF_BASE 0x1c00000000 diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index 24a64b7575..b61666ed4b 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -2,7 +2,7 @@ /* * LayerScape Internal Memory Map * - * Copyright 2017-2019 NXP + * Copyright 2017-2020 NXP * Copyright 2014 Freescale Semiconductor, Inc. */ @@ -15,7 +15,7 @@ #define CONFIG_SYS_FSL_DDR3_ADDR 0x08210000 #define CONFIG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00E00000) #define CONFIG_SYS_FSL_PMU_ADDR (CONFIG_SYS_IMMR + 0x00E30000) -#ifdef CONFIG_ARCH_LX2160A +#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) #define CONFIG_SYS_FSL_RST_ADDR (CONFIG_SYS_IMMR + 0x00e88180) #else #define CONFIG_SYS_FSL_RST_ADDR (CONFIG_SYS_IMMR + 0x00E60000) @@ -198,12 +198,12 @@ #define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR + 0x2500000) #define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_IMMR + 0x2600000) #define CONFIG_SYS_PCIE4_ADDR (CONFIG_SYS_IMMR + 0x2700000) -#ifdef CONFIG_ARCH_LX2160A +#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) #define SYS_PCIE5_ADDR (CONFIG_SYS_IMMR + 0x2800000) #define SYS_PCIE6_ADDR (CONFIG_SYS_IMMR + 0x2900000) #endif -#ifdef CONFIG_ARCH_LX2160A +#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) #define CONFIG_SYS_PCIE1_PHYS_ADDR 0x8000000000ULL #define CONFIG_SYS_PCIE2_PHYS_ADDR 0x8800000000ULL #define CONFIG_SYS_PCIE3_PHYS_ADDR 0x9000000000ULL @@ -267,7 +267,7 @@ defined(CONFIG_ARCH_LS1028A) #define USB_PHY_RX_EQ_VAL_3 0x0380 #define USB_PHY_RX_EQ_VAL_4 0x0b80 -#elif defined(CONFIG_ARCH_LX2160A) +#elif defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) #define USB_PHY_RX_EQ_VAL_3 0x0080 #define USB_PHY_RX_EQ_VAL_4 0x0880 #endif @@ -391,7 +391,7 @@ struct ccsr_gur { #define FSL_CHASSIS3_SRDS2_PRTCL_SHIFT FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT #define FSL_CHASSIS3_SRDS1_REGSR 29 #define FSL_CHASSIS3_SRDS2_REGSR 29 -#elif defined(CONFIG_ARCH_LX2160A) +#elif defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) #define FSL_CHASSIS3_EC1_REGSR 27 #define FSL_CHASSIS3_EC2_REGSR 27 #define FSL_CHASSIS3_EC1_REGSR_PRTCL_MASK 0x00000003 diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h index 020548ac6c..b24f38cac9 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright 2017-2019 NXP + * Copyright 2017-2020 NXP * Copyright 2015 Freescale Semiconductor */ @@ -106,13 +106,16 @@ enum boot_src get_boot_src(void); #define SVR_LX2160A 0x873600 #define SVR_LX2120A 0x873620 #define SVR_LX2080A 0x873602 +#define SVR_LX2162A 0x873608 +#define SVR_LX2122A 0x873628 +#define SVR_LX2082A 0x87360A #define SVR_MAJ(svr) (((svr) >> 4) & 0xf) #define SVR_MIN(svr) (((svr) >> 0) & 0xf) #define SVR_REV(svr) (((svr) >> 0) & 0xff) #define SVR_SOC_VER(svr) (((svr) >> 8) & SVR_WO_E) #define IS_E_PROCESSOR(svr) (!((svr >> 8) & 0x1)) -#ifdef CONFIG_ARCH_LX2160A +#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) #define IS_C_PROCESSOR(svr) (!((svr >> 12) & 0x1)) #endif #ifdef CONFIG_ARCH_LS1028A diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h index 4c54e3d3d5..36f36699a7 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright 2015-2019 NXP + * Copyright 2015-2020 NXP * Copyright 2014 Freescale Semiconductor, Inc. * */ @@ -74,11 +74,13 @@ #define FSL_SDMMC_STREAM_ID 3 #define FSL_SATA1_STREAM_ID 4 -#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LX2160A) +#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LX2160A) || \ + defined(CONFIG_ARCH_LX2162A) #define FSL_SATA2_STREAM_ID 5 #endif -#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LX2160A) +#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LX2160A) || \ + defined(CONFIG_ARCH_LX2162A) #define FSL_DMA_STREAM_ID 6 #elif defined(CONFIG_ARCH_LS1088A) || defined(CONFIG_ARCH_LS1028A) #define FSL_DMA_STREAM_ID 5 @@ -91,7 +93,7 @@ #define FSL_PEX_STREAM_ID_END 22 #elif defined(CONFIG_ARCH_LS1088A) #define FSL_PEX_STREAM_ID_END 18 -#elif defined(CONFIG_ARCH_LX2160A) +#elif defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) #define FSL_PEX_STREAM_ID_END (0x100) #endif diff --git a/arch/arm/include/asm/arch-stih410/sdhci.h b/arch/arm/include/asm/arch-stih410/sdhci.h index d5557b89fc..1735c0e391 100644 --- a/arch/arm/include/asm/arch-stih410/sdhci.h +++ b/arch/arm/include/asm/arch-stih410/sdhci.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2017, STMicroelectronics - All Rights Reserved - * Author(s): Patrice Chotard, <patrice.chotard@st.com> for STMicroelectronics. + * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics. */ #ifndef __STI_SDHCI_H__ diff --git a/arch/arm/include/asm/arch-stih410/sys_proto.h b/arch/arm/include/asm/arch-stih410/sys_proto.h index f9e8d3704a..30e7f398eb 100644 --- a/arch/arm/include/asm/arch-stih410/sys_proto.h +++ b/arch/arm/include/asm/arch-stih410/sys_proto.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2017, STMicroelectronics - All Rights Reserved - * Author(s): Patrice Chotard, <patrice.chotard@st.com> for STMicroelectronics. + * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics. */ #ifndef _ASM_ARCH_SYS_PROTO_H diff --git a/arch/arm/include/asm/arch-stm32/stm32f.h b/arch/arm/include/asm/arch-stm32/stm32f.h index bd3f4fd30a..a1ce81ecad 100644 --- a/arch/arm/include/asm/arch-stm32/stm32f.h +++ b/arch/arm/include/asm/arch-stm32/stm32f.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2018, STMicroelectronics - All Rights Reserved - * Author(s): Patrice Chotard, <patrice.chotard@st.com> for STMicroelectronics. + * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics. */ #ifndef _ASM_ARCH_STM32F_H diff --git a/arch/arm/include/asm/arch-stm32f4/stm32_pwr.h b/arch/arm/include/asm/arch-stm32f4/stm32_pwr.h index 8af6de220d..fe6ca03d2d 100644 --- a/arch/arm/include/asm/arch-stm32f4/stm32_pwr.h +++ b/arch/arm/include/asm/arch-stm32f4/stm32_pwr.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2017, STMicroelectronics - All Rights Reserved - * Author(s): Patrice Chotard, <patrice.chotard@st.com> for STMicroelectronics. + * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics. */ #ifndef __STM32_PWR_H_ diff --git a/arch/arm/include/asm/arch-stm32f7/stm32_pwr.h b/arch/arm/include/asm/arch-stm32f7/stm32_pwr.h index 02faaeb663..5cd6553d04 100644 --- a/arch/arm/include/asm/arch-stm32f7/stm32_pwr.h +++ b/arch/arm/include/asm/arch-stm32f7/stm32_pwr.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2017, STMicroelectronics - All Rights Reserved - * Author(s): Patrice Chotard, <patrice.chotard@st.com> for STMicroelectronics. + * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics. */ #ifndef __STM32_PWR_H_ diff --git a/arch/arm/include/asm/arch-stm32h7/gpio.h b/arch/arm/include/asm/arch-stm32h7/gpio.h index 2dad52a400..4f57f175ff 100644 --- a/arch/arm/include/asm/arch-stm32h7/gpio.h +++ b/arch/arm/include/asm/arch-stm32h7/gpio.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2017, STMicroelectronics - All Rights Reserved - * Author(s): Patrice Chotard, <patrice.chotard@st.com> for STMicroelectronics. + * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics. */ #ifndef _STM32_GPIO_H_ diff --git a/arch/arm/include/asm/arch-stm32h7/stm32.h b/arch/arm/include/asm/arch-stm32h7/stm32.h index 458baca458..2b0a670008 100644 --- a/arch/arm/include/asm/arch-stm32h7/stm32.h +++ b/arch/arm/include/asm/arch-stm32h7/stm32.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2017, STMicroelectronics - All Rights Reserved - * Author(s): Patrice Chotard, <patrice.chotard@st.com> for STMicroelectronics. + * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics. */ #ifndef _ASM_ARCH_HARDWARE_H diff --git a/arch/arm/include/asm/mach-imx/sys_proto.h b/arch/arm/include/asm/mach-imx/sys_proto.h index 5f0c1ae218..43eae6d796 100644 --- a/arch/arm/include/asm/mach-imx/sys_proto.h +++ b/arch/arm/include/asm/mach-imx/sys_proto.h @@ -183,6 +183,11 @@ void init_src(void); void init_snvs(void); void imx_wdog_disable_powerdown(void); +void board_mem_get_layout(u64 *phys_sdram_1_start, + u64 *phys_sdram_1_size, + u64 *phys_sdram_2_start, + u64 *phys_sdram_2_size); + int arch_auxiliary_core_check_up(u32 core_id); int board_mmc_get_env_dev(int devno); diff --git a/arch/arm/mach-at91/armv7/Makefile b/arch/arm/mach-at91/armv7/Makefile index 55477560a8..f5b2665957 100644 --- a/arch/arm/mach-at91/armv7/Makefile +++ b/arch/arm/mach-at91/armv7/Makefile @@ -6,13 +6,15 @@ # (C) Copyright 2013 # Bo Shen <voice.shen@atmel.com> -obj-$(CONFIG_SAMA5D2) += sama5d2_devices.o -obj-$(CONFIG_SAMA5D3) += sama5d3_devices.o -obj-$(CONFIG_SAMA5D4) += sama5d4_devices.o +obj-$(CONFIG_SAMA5D2) += sama5d2_devices.o clock.o +obj-$(CONFIG_SAMA5D3) += sama5d3_devices.o clock.o +obj-$(CONFIG_SAMA5D4) += sama5d4_devices.o clock.o obj-$(CONFIG_SAMA7G5) += sama7g5_devices.o -obj-y += clock.o obj-y += cpu.o obj-y += reset.o -ifeq ($(CONFIG_ATMEL_PIT_TIMER),) +ifneq ($(CONFIG_ATMEL_PIT_TIMER),y) +ifneq ($(CONFIG_MCHP_PIT64B_TIMER),y) +# old non-DM timer driver obj-y += timer.o endif +endif diff --git a/arch/arm/mach-at91/armv7/cpu.c b/arch/arm/mach-at91/armv7/cpu.c index 8b7355042b..9b3753491e 100644 --- a/arch/arm/mach-at91/armv7/cpu.c +++ b/arch/arm/mach-at91/armv7/cpu.c @@ -24,7 +24,11 @@ int arch_cpu_init(void) { +#if defined(CONFIG_CLK_CCF) + return 0; +#else return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK); +#endif } void arch_preboot_os(void) diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig index 9d1f73dfc7..04b9729109 100644 --- a/arch/arm/mach-imx/imx8/Kconfig +++ b/arch/arm/mach-imx/imx8/Kconfig @@ -65,6 +65,11 @@ config TARGET_COLIBRI_IMX8X select BOARD_LATE_INIT select IMX8QXP +config TARGET_APALIS_IMX8X + bool "Support Apalis iMX8X module" + select BOARD_LATE_INIT + select IMX8QXP + config TARGET_DENEB bool "Support i.MX8QXP Capricorn Deneb board" select BOARD_LATE_INIT @@ -98,6 +103,7 @@ source "board/freescale/imx8qxp_mek/Kconfig" source "board/advantech/imx8qm_rom7720_a1/Kconfig" source "board/toradex/apalis-imx8/Kconfig" source "board/toradex/colibri-imx8x/Kconfig" +source "board/toradex/apalis-imx8x/Kconfig" source "board/siemens/capricorn/Kconfig" config IMX_SNVS_SEC_SC diff --git a/arch/arm/mach-imx/imx8/ahab.c b/arch/arm/mach-imx/imx8/ahab.c index 5dbe1d56e0..600a1108ce 100644 --- a/arch/arm/mach-imx/imx8/ahab.c +++ b/arch/arm/mach-imx/imx8/ahab.c @@ -14,6 +14,7 @@ #include <asm/arch/sys_proto.h> #include <asm/arch/image.h> #include <console.h> +#include <cpu_func.h> DECLARE_GLOBAL_DATA_PTR; @@ -92,7 +93,7 @@ int authenticate_os_container(ulong addr) sizeof(struct container_hdr) + i * sizeof(struct boot_img_t)); - debug("img %d, dst 0x%x, src 0x%x, size 0x%x\n", + debug("img %d, dst 0x%x, src 0x%lux, size 0x%x\n", i, (uint32_t) img->dst, img->offset + addr, img->size); memcpy((void *)img->dst, (const void *)(img->offset + addr), @@ -106,7 +107,7 @@ int authenticate_os_container(ulong addr) /* Find the memreg and set permission for seco pt */ err = sc_rm_find_memreg(-1, &mr, s, e); if (err) { - printf("Error: can't find memreg for image load address 0x%x, error %d\n", img->dst, err); + printf("Error: can't find memreg for image load address 0x%llx, error %d\n", img->dst, err); ret = -ENOMEM; goto exit; } @@ -302,10 +303,11 @@ static int confirm_close(void) static int do_ahab_close(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { + int confirmed = argc >= 2 && !strcmp(argv[1], "-y"); int err; u16 lc; - if (!confirm_close()) + if (!confirmed && !confirm_close()) return -EACCES; err = sc_seco_chip_info(-1, &lc, NULL, NULL, NULL); diff --git a/arch/arm/mach-imx/imx8/cpu.c b/arch/arm/mach-imx/imx8/cpu.c index 38b2c0926f..911d6a51d1 100644 --- a/arch/arm/mach-imx/imx8/cpu.c +++ b/arch/arm/mach-imx/imx8/cpu.c @@ -260,14 +260,30 @@ static int get_owned_memreg(sc_rm_mr_t mr, sc_faddr_t *addr_start, return -EINVAL; } +__weak void board_mem_get_layout(u64 *phys_sdram_1_start, + u64 *phys_sdram_1_size, + u64 *phys_sdram_2_start, + u64 *phys_sdram_2_size) +{ + *phys_sdram_1_start = PHYS_SDRAM_1; + *phys_sdram_1_size = PHYS_SDRAM_1_SIZE; + *phys_sdram_2_start = PHYS_SDRAM_2; + *phys_sdram_2_size = PHYS_SDRAM_2_SIZE; +} + phys_size_t get_effective_memsize(void) { sc_rm_mr_t mr; sc_faddr_t start, end, end1, start_aligned; + u64 phys_sdram_1_start, phys_sdram_1_size; + u64 phys_sdram_2_start, phys_sdram_2_size; int err; - end1 = (sc_faddr_t)PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE; + board_mem_get_layout(&phys_sdram_1_start, &phys_sdram_1_size, + &phys_sdram_2_start, &phys_sdram_2_size); + + end1 = (sc_faddr_t)phys_sdram_1_start + phys_sdram_1_size; for (mr = 0; mr < 64; mr++) { err = get_owned_memreg(mr, &start, &end); if (!err) { @@ -277,29 +293,35 @@ phys_size_t get_effective_memsize(void) continue; /* Find the memory region runs the U-Boot */ - if (start >= PHYS_SDRAM_1 && start <= end1 && + if (start >= phys_sdram_1_start && start <= end1 && (start <= CONFIG_SYS_TEXT_BASE && end >= CONFIG_SYS_TEXT_BASE)) { - if ((end + 1) <= ((sc_faddr_t)PHYS_SDRAM_1 + - PHYS_SDRAM_1_SIZE)) - return (end - PHYS_SDRAM_1 + 1); + if ((end + 1) <= + ((sc_faddr_t)phys_sdram_1_start + + phys_sdram_1_size)) + return (end - phys_sdram_1_start + 1); else - return PHYS_SDRAM_1_SIZE; + return phys_sdram_1_size; } } } - return PHYS_SDRAM_1_SIZE; + return phys_sdram_1_size; } int dram_init(void) { sc_rm_mr_t mr; sc_faddr_t start, end, end1, end2; + u64 phys_sdram_1_start, phys_sdram_1_size; + u64 phys_sdram_2_start, phys_sdram_2_size; int err; - end1 = (sc_faddr_t)PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE; - end2 = (sc_faddr_t)PHYS_SDRAM_2 + PHYS_SDRAM_2_SIZE; + board_mem_get_layout(&phys_sdram_1_start, &phys_sdram_1_size, + &phys_sdram_2_start, &phys_sdram_2_size); + + end1 = (sc_faddr_t)phys_sdram_1_start + phys_sdram_1_size; + end2 = (sc_faddr_t)phys_sdram_2_start + phys_sdram_2_size; for (mr = 0; mr < 64; mr++) { err = get_owned_memreg(mr, &start, &end); if (!err) { @@ -308,12 +330,13 @@ int dram_init(void) if (start > end) continue; - if (start >= PHYS_SDRAM_1 && start <= end1) { + if (start >= phys_sdram_1_start && start <= end1) { if ((end + 1) <= end1) gd->ram_size += end - start + 1; else gd->ram_size += end1 - start; - } else if (start >= PHYS_SDRAM_2 && start <= end2) { + } else if (start >= phys_sdram_2_start && + start <= end2) { if ((end + 1) <= end2) gd->ram_size += end - start + 1; else @@ -324,8 +347,8 @@ int dram_init(void) /* If error, set to the default value */ if (!gd->ram_size) { - gd->ram_size = PHYS_SDRAM_1_SIZE; - gd->ram_size += PHYS_SDRAM_2_SIZE; + gd->ram_size = phys_sdram_1_size; + gd->ram_size += phys_sdram_2_size; } return 0; } @@ -358,11 +381,15 @@ int dram_init_banksize(void) sc_rm_mr_t mr; sc_faddr_t start, end, end1, end2; int i = 0; + u64 phys_sdram_1_start, phys_sdram_1_size; + u64 phys_sdram_2_start, phys_sdram_2_size; int err; - end1 = (sc_faddr_t)PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE; - end2 = (sc_faddr_t)PHYS_SDRAM_2 + PHYS_SDRAM_2_SIZE; + board_mem_get_layout(&phys_sdram_1_start, &phys_sdram_1_size, + &phys_sdram_2_start, &phys_sdram_2_size); + end1 = (sc_faddr_t)phys_sdram_1_start + phys_sdram_1_size; + end2 = (sc_faddr_t)phys_sdram_2_start + phys_sdram_2_size; for (mr = 0; mr < 64 && i < CONFIG_NR_DRAM_BANKS; mr++) { err = get_owned_memreg(mr, &start, &end); if (!err) { @@ -370,7 +397,7 @@ int dram_init_banksize(void) if (start > end) /* Small memory region, no use it */ continue; - if (start >= PHYS_SDRAM_1 && start <= end1) { + if (start >= phys_sdram_1_start && start <= end1) { gd->bd->bi_dram[i].start = start; if ((end + 1) <= end1) @@ -381,7 +408,7 @@ int dram_init_banksize(void) dram_bank_sort(i); i++; - } else if (start >= PHYS_SDRAM_2 && start <= end2) { + } else if (start >= phys_sdram_2_start && start <= end2) { gd->bd->bi_dram[i].start = start; if ((end + 1) <= end2) @@ -398,10 +425,10 @@ int dram_init_banksize(void) /* If error, set to the default value */ if (!i) { - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; + gd->bd->bi_dram[0].start = phys_sdram_1_start; + gd->bd->bi_dram[0].size = phys_sdram_1_size; + gd->bd->bi_dram[1].start = phys_sdram_2_start; + gd->bd->bi_dram[1].size = phys_sdram_2_size; } return 0; @@ -411,11 +438,16 @@ static u64 get_block_attrs(sc_faddr_t addr_start) { u64 attr = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN; + u64 phys_sdram_1_start, phys_sdram_1_size; + u64 phys_sdram_2_start, phys_sdram_2_size; + + board_mem_get_layout(&phys_sdram_1_start, &phys_sdram_1_size, + &phys_sdram_2_start, &phys_sdram_2_size); - if ((addr_start >= PHYS_SDRAM_1 && - addr_start <= ((sc_faddr_t)PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)) || - (addr_start >= PHYS_SDRAM_2 && - addr_start <= ((sc_faddr_t)PHYS_SDRAM_2 + PHYS_SDRAM_2_SIZE))) + if ((addr_start >= phys_sdram_1_start && + addr_start <= ((sc_faddr_t)phys_sdram_1_start + phys_sdram_1_size)) || + (addr_start >= phys_sdram_2_start && + addr_start <= ((sc_faddr_t)phys_sdram_2_start + phys_sdram_2_size))) return (PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE); return attr; @@ -424,14 +456,20 @@ static u64 get_block_attrs(sc_faddr_t addr_start) static u64 get_block_size(sc_faddr_t addr_start, sc_faddr_t addr_end) { sc_faddr_t end1, end2; + u64 phys_sdram_1_start, phys_sdram_1_size; + u64 phys_sdram_2_start, phys_sdram_2_size; + + board_mem_get_layout(&phys_sdram_1_start, &phys_sdram_1_size, + &phys_sdram_2_start, &phys_sdram_2_size); + - end1 = (sc_faddr_t)PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE; - end2 = (sc_faddr_t)PHYS_SDRAM_2 + PHYS_SDRAM_2_SIZE; + end1 = (sc_faddr_t)phys_sdram_1_start + phys_sdram_1_size; + end2 = (sc_faddr_t)phys_sdram_2_start + phys_sdram_2_size; - if (addr_start >= PHYS_SDRAM_1 && addr_start <= end1) { + if (addr_start >= phys_sdram_1_start && addr_start <= end1) { if ((addr_end + 1) > end1) return end1 - addr_start; - } else if (addr_start >= PHYS_SDRAM_2 && addr_start <= end2) { + } else if (addr_start >= phys_sdram_2_start && addr_start <= end2) { if ((addr_end + 1) > end2) return end2 - addr_start; } diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index 9bca5bf972..5df8e17510 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -210,6 +210,9 @@ int dram_init(void) else gd->ram_size = sdram_size; + /* also update the SDRAM size in the mem_map used externally */ + imx8m_mem_map[5].size = sdram_size; + #ifdef PHYS_SDRAM_2_SIZE gd->ram_size += PHYS_SDRAM_2_SIZE; #endif diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 0646b7369c..513d007ce7 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -128,30 +128,8 @@ config TARGET_APALIS_IMX6 imply CMD_DM imply CMD_SATA -config TARGET_ARISTAINETOS2 - bool "aristainetos2" - depends on MX6DL - select BOARD_LATE_INIT - select SYS_I2C_MXC - select MXC_UART - select FEC_MXC - select DM - imply CMD_SATA - imply CMD_DM - -config TARGET_ARISTAINETOS2B - bool "Support aristainetos2-revB" - depends on MX6DL - select BOARD_LATE_INIT - select SYS_I2C_MXC - select MXC_UART - select FEC_MXC - select DM - imply CMD_SATA - imply CMD_DM - -config TARGET_ARISTAINETOS2BCSL - bool "Support aristainetos2-revB CSL" +config TARGET_ARISTAINETOS2C + bool "Support aristainetos2-revC" depends on MX6DL select BOARD_LATE_INIT select SYS_I2C_MXC @@ -161,8 +139,8 @@ config TARGET_ARISTAINETOS2BCSL imply CMD_SATA imply CMD_DM -config TARGET_ARISTAINETOS2C - bool "Support aristainetos2-revC" +config TARGET_ARISTAINETOS2CCSLB + bool "Support aristainetos2-revC CSL" depends on MX6DL select BOARD_LATE_INIT select SYS_I2C_MXC diff --git a/arch/arm/mach-imx/mx7/clock.c b/arch/arm/mach-imx/mx7/clock.c index aba9461d92..6a1bad855e 100644 --- a/arch/arm/mach-imx/mx7/clock.c +++ b/arch/arm/mach-imx/mx7/clock.c @@ -916,7 +916,7 @@ void mxs_set_lcdclk(uint32_t base_addr, uint32_t freq) } if (5 == i) { - printf("Fail to set rate to %dkhz", freq); + printf("Fail to set rate to %u kHz", freq); return; } } @@ -936,7 +936,7 @@ void mxs_set_lcdclk(uint32_t base_addr, uint32_t freq) } if (best == 0) { - printf("Fail to set rate to %dkhz", freq); + printf("Fail to set rate to %u kHz", freq); return; } @@ -1115,17 +1115,17 @@ int do_mx7_showclocks(struct cmd_tbl *cmdtp, int flag, int argc, printf("\n"); - printf("IPG %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000); - printf("UART %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000); + printf("IPG %8u kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000); + printf("UART %8u kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000); #ifdef CONFIG_MXC_SPI - printf("CSPI %8d kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000); + printf("CSPI %8u kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000); #endif - printf("AHB %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000); - printf("AXI %8d kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000); - printf("DDR %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000); - printf("USDHC1 %8d kHz\n", mxc_get_clock(MXC_ESDHC_CLK) / 1000); - printf("USDHC2 %8d kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000); - printf("USDHC3 %8d kHz\n", mxc_get_clock(MXC_ESDHC3_CLK) / 1000); + printf("AHB %8u kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000); + printf("AXI %8u kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000); + printf("DDR %8u kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000); + printf("USDHC1 %8u kHz\n", mxc_get_clock(MXC_ESDHC_CLK) / 1000); + printf("USDHC2 %8u kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000); + printf("USDHC3 %8u kHz\n", mxc_get_clock(MXC_ESDHC3_CLK) / 1000); return 0; } diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 0d8e0922a2..72aee8b3e5 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -30,6 +30,12 @@ config ARMADA_38X select ARMADA_32BIT select HAVE_MVEBU_EFUSE +config ARMADA_38X_HS_IMPEDANCE_THRESH + hex "Armada 38x USB 2.0 High-Speed Impedance Threshold (0x0 - 0x7)" + depends on ARMADA_38X + default 0x6 + range 0x0 0x7 + config ARMADA_XP bool select ARMADA_32BIT diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c index 2454730e6d..ae2a361104 100644 --- a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c +++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c @@ -677,9 +677,9 @@ struct op_params usb2_power_up_params[] = { {0xc200c, 0x0 /*NA*/, 0xf000, {0x1000}, 0, 0}, {0xc400c, 0x0 /*NA*/, 0xf000, {0x1000}, 0, 0}, /* Change the High speed impedance threshold */ - {0xc0008, 0x0 /*NA*/, 0x700, {0x600}, 0, 0}, - {0xc2008, 0x0 /*NA*/, 0x700, {0x600}, 0, 0}, - {0xc4008, 0x0 /*NA*/, 0x700, {0x600}, 0, 0}, + {0xc0008, 0x0 /*NA*/, 0x700, {CONFIG_ARMADA_38X_HS_IMPEDANCE_THRESH << 8}, 0, 0}, + {0xc2008, 0x0 /*NA*/, 0x700, {CONFIG_ARMADA_38X_HS_IMPEDANCE_THRESH << 8}, 0, 0}, + {0xc4008, 0x0 /*NA*/, 0x700, {CONFIG_ARMADA_38X_HS_IMPEDANCE_THRESH << 8}, 0, 0}, /* Change the squelch level of the receiver to meet the receiver electrical measurements (squelch and receiver sensitivity tests) */ {0xc0014, 0x0 /*NA*/, 0xf, {0x8}, 0, 0}, {0xc2014, 0x0 /*NA*/, 0xf, {0x8}, 0, 0}, diff --git a/arch/arm/mach-stm32/soc.c b/arch/arm/mach-stm32/soc.c index 1f12da401c..0bd8d7b22c 100644 --- a/arch/arm/mach-stm32/soc.c +++ b/arch/arm/mach-stm32/soc.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2017, STMicroelectronics - All Rights Reserved - * Author(s): Patrice Chotard, <patrice.chotard@st.com> for STMicroelectronics. + * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics. */ #include <common.h> diff --git a/arch/arm/mach-tegra/tegra124/Kconfig b/arch/arm/mach-tegra/tegra124/Kconfig index 6fa31ea0a1..fb016aa46c 100644 --- a/arch/arm/mach-tegra/tegra124/Kconfig +++ b/arch/arm/mach-tegra/tegra124/Kconfig @@ -19,6 +19,7 @@ config TARGET_JETSON_TK1 config TARGET_CEI_TK1_SOM bool "Colorado Engineering Inc Tegra124 TK1-som board" + select ARCH_SUPPORT_PSCI select BOARD_LATE_INIT select CPU_V7_HAS_NONSEC if !SPL_BUILD select CPU_V7_HAS_VIRT if !SPL_BUILD diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S index d0c412236d..335aafa6a8 100644 --- a/arch/mips/cpu/start.S +++ b/arch/mips/cpu/start.S @@ -74,9 +74,14 @@ .endm ENTRY(_start) - /* U-Boot entry point */ + /* + * U-Boot entry point. + * Do not add instructions to the branch delay slot! Some SoC's + * like Octeon might patch the final U-Boot binary at this location + * with additional boot headers. + */ b reset - mtc0 zero, CP0_COUNT # clear cp0 count for most accurate boot timing + nop #if defined(CONFIG_MIPS_INSERT_BOOT_CONFIG) /* @@ -123,6 +128,7 @@ ENTRY(_start) #endif reset: + mtc0 zero, CP0_COUNT # clear cp0 count for most accurate boot timing #if __mips_isa_rev >= 6 mfc0 t0, CP0_CONFIG, 5 and t0, t0, MIPS_CONF5_VP diff --git a/arch/mips/dts/mscc,jr2.dtsi b/arch/mips/dts/mscc,jr2.dtsi index 7f5a96fecd..c44e9a2b3a 100644 --- a/arch/mips/dts/mscc,jr2.dtsi +++ b/arch/mips/dts/mscc,jr2.dtsi @@ -94,7 +94,7 @@ spi0: spi-master@101000 { #address-cells = <1>; #size-cells = <0>; - compatible = "snps,dw-apb-ssi"; + compatible = "mscc,jaguar2-spi", "snps,dw-apb-ssi"; reg = <0x101000 0x40>; num-chipselect = <4>; bus-num = <0>; diff --git a/arch/mips/dts/mscc,ocelot.dtsi b/arch/mips/dts/mscc,ocelot.dtsi index 9a187b6e58..aeb4bf8f4b 100644 --- a/arch/mips/dts/mscc,ocelot.dtsi +++ b/arch/mips/dts/mscc,ocelot.dtsi @@ -100,7 +100,7 @@ spi0: spi-master@101000 { #address-cells = <1>; #size-cells = <0>; - compatible = "snps,dw-apb-ssi"; + compatible = "mscc,ocelot-spi", "snps,dw-apb-ssi"; reg = <0x101000 0x40>; num-chipselect = <4>; bus-num = <0>; diff --git a/arch/mips/mach-octeon/bootoctlinux.c b/arch/mips/mach-octeon/bootoctlinux.c index 75d7e83bd7..26136902f3 100644 --- a/arch/mips/mach-octeon/bootoctlinux.c +++ b/arch/mips/mach-octeon/bootoctlinux.c @@ -9,7 +9,6 @@ #include <dm.h> #include <elf.h> #include <env.h> -#include <ram.h> #include <asm/io.h> #include <linux/compat.h> @@ -370,8 +369,6 @@ int do_bootoctlinux(struct cmd_tbl *cmdtp, int flag, int argc, struct cvmx_coremask avail_coremask; int first_core; int core; - struct ram_info ram; - struct udevice *dev; const u64 *nmi_code; int num_dwords; u8 node_mask = 0x01; @@ -470,19 +467,6 @@ int do_bootoctlinux(struct cmd_tbl *cmdtp, int flag, int argc, */ cvmx_coremask_or(&coremask_to_run, &coremask_to_run, &core_mask); - /* Get RAM size */ - ret = uclass_get_device(UCLASS_RAM, 0, &dev); - if (ret) { - debug("DRAM init failed: %d\n", ret); - return ret; - } - - ret = ram_get_info(dev, &ram); - if (ret) { - debug("Cannot get DRAM size: %d\n", ret); - return ret; - } - /* * Load kernel ELF image, or try binary if ELF is not detected. * This way the much smaller vmlinux.bin can also be started but @@ -498,7 +482,7 @@ int do_bootoctlinux(struct cmd_tbl *cmdtp, int flag, int argc, /* Init bootmem list for Linux kernel booting */ if (!cvmx_bootmem_phy_mem_list_init( - ram.size, OCTEON_RESERVED_LOW_MEM_SIZE, + gd->ram_size, OCTEON_RESERVED_LOW_MEM_SIZE, (void *)CKSEG0ADDR(BOOTLOADER_BOOTMEM_DESC_SPACE))) { printf("FATAL: Error initializing free memory list\n"); return 0; @@ -517,7 +501,8 @@ int do_bootoctlinux(struct cmd_tbl *cmdtp, int flag, int argc, if (core == first_core) cvmx_bootinfo_array[core].flags |= BOOT_FLAG_INIT_CORE; - cvmx_bootinfo_array[core].dram_size = ram.size / (1024 * 1024); + cvmx_bootinfo_array[core].dram_size = gd->ram_size / + (1024 * 1024); cvmx_bootinfo_array[core].dclock_hz = gd->mem_clk * 1000000; cvmx_bootinfo_array[core].eclock_hz = gd->cpu_clk; diff --git a/arch/mips/mach-octeon/dram.c b/arch/mips/mach-octeon/dram.c index 6dc08e19da..4679260f17 100644 --- a/arch/mips/mach-octeon/dram.c +++ b/arch/mips/mach-octeon/dram.c @@ -33,7 +33,7 @@ int dram_init(void) return ret; } - gd->ram_size = min_t(size_t, ram.size, UBOOT_RAM_SIZE_MAX); + gd->ram_size = ram.size; debug("SDRAM base=%lx, size=%lx\n", (unsigned long)ram.base, (unsigned long)ram.size); } else { @@ -72,6 +72,11 @@ void board_add_ram_info(int use_default) } } +phys_size_t get_effective_memsize(void) +{ + return UBOOT_RAM_SIZE_MAX; +} + ulong board_get_usable_ram_top(ulong total_size) { if (IS_ENABLED(CONFIG_RAM_OCTEON)) { diff --git a/arch/mips/mach-octeon/include/mach/cvmx-bootinfo.h b/arch/mips/mach-octeon/include/mach/cvmx-bootinfo.h index 337987178f..97438ff787 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-bootinfo.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-bootinfo.h @@ -125,226 +125,4 @@ struct cvmx_bootinfo { #endif /* (CVMX_BOOTINFO_MAJ_VER == 1) */ -/* Type defines for board and chip types */ -enum cvmx_board_types_enum { - CVMX_BOARD_TYPE_NULL = 0, - CVMX_BOARD_TYPE_SIM = 1, - CVMX_BOARD_TYPE_EBT3000 = 2, - CVMX_BOARD_TYPE_KODAMA = 3, - CVMX_BOARD_TYPE_NIAGARA = 4, - CVMX_BOARD_TYPE_NAC38 = 5, /* formerly NAO38 */ - CVMX_BOARD_TYPE_THUNDER = 6, - CVMX_BOARD_TYPE_TRANTOR = 7, - CVMX_BOARD_TYPE_EBH3000 = 8, - CVMX_BOARD_TYPE_EBH3100 = 9, - CVMX_BOARD_TYPE_HIKARI = 10, - CVMX_BOARD_TYPE_CN3010_EVB_HS5 = 11, - CVMX_BOARD_TYPE_CN3005_EVB_HS5 = 12, - CVMX_BOARD_TYPE_KBP = 13, - /* Deprecated, CVMX_BOARD_TYPE_CN3010_EVB_HS5 supports the CN3020 */ - CVMX_BOARD_TYPE_CN3020_EVB_HS5 = 14, - CVMX_BOARD_TYPE_EBT5800 = 15, - CVMX_BOARD_TYPE_NICPRO2 = 16, - CVMX_BOARD_TYPE_EBH5600 = 17, - CVMX_BOARD_TYPE_EBH5601 = 18, - CVMX_BOARD_TYPE_EBH5200 = 19, - CVMX_BOARD_TYPE_BBGW_REF = 20, - CVMX_BOARD_TYPE_NIC_XLE_4G = 21, - CVMX_BOARD_TYPE_EBT5600 = 22, - CVMX_BOARD_TYPE_EBH5201 = 23, - CVMX_BOARD_TYPE_EBT5200 = 24, - CVMX_BOARD_TYPE_CB5600 = 25, - CVMX_BOARD_TYPE_CB5601 = 26, - CVMX_BOARD_TYPE_CB5200 = 27, - /* Special 'generic' board type, supports many boards */ - CVMX_BOARD_TYPE_GENERIC = 28, - CVMX_BOARD_TYPE_EBH5610 = 29, - CVMX_BOARD_TYPE_LANAI2_A = 30, - CVMX_BOARD_TYPE_LANAI2_U = 31, - CVMX_BOARD_TYPE_EBB5600 = 32, - CVMX_BOARD_TYPE_EBB6300 = 33, - CVMX_BOARD_TYPE_NIC_XLE_10G = 34, - CVMX_BOARD_TYPE_LANAI2_G = 35, - CVMX_BOARD_TYPE_EBT5810 = 36, - CVMX_BOARD_TYPE_NIC10E = 37, - CVMX_BOARD_TYPE_EP6300C = 38, - CVMX_BOARD_TYPE_EBB6800 = 39, - CVMX_BOARD_TYPE_NIC4E = 40, - CVMX_BOARD_TYPE_NIC2E = 41, - CVMX_BOARD_TYPE_EBB6600 = 42, - CVMX_BOARD_TYPE_REDWING = 43, - CVMX_BOARD_TYPE_NIC68_4 = 44, - CVMX_BOARD_TYPE_NIC10E_66 = 45, - CVMX_BOARD_TYPE_MAX, - - /* - * The range from CVMX_BOARD_TYPE_MAX to - * CVMX_BOARD_TYPE_CUST_DEFINED_MIN is reserved for future - * SDK use. - */ - - /* - * Set aside a range for customer boards. These numbers are managed - * by Cavium. - */ - CVMX_BOARD_TYPE_CUST_DEFINED_MIN = 10000, - CVMX_BOARD_TYPE_CUST_WSX16 = 10001, - CVMX_BOARD_TYPE_CUST_NS0216 = 10002, - CVMX_BOARD_TYPE_CUST_NB5 = 10003, - CVMX_BOARD_TYPE_CUST_WMR500 = 10004, - CVMX_BOARD_TYPE_CUST_ITB101 = 10005, - CVMX_BOARD_TYPE_CUST_NTE102 = 10006, - CVMX_BOARD_TYPE_CUST_AGS103 = 10007, - CVMX_BOARD_TYPE_CUST_GST104 = 10008, - CVMX_BOARD_TYPE_CUST_GCT105 = 10009, - CVMX_BOARD_TYPE_CUST_AGS106 = 10010, - CVMX_BOARD_TYPE_CUST_SGM107 = 10011, - CVMX_BOARD_TYPE_CUST_GCT108 = 10012, - CVMX_BOARD_TYPE_CUST_AGS109 = 10013, - CVMX_BOARD_TYPE_CUST_GCT110 = 10014, - CVMX_BOARD_TYPE_CUST_L2_AIR_SENDER = 10015, - CVMX_BOARD_TYPE_CUST_L2_AIR_RECEIVER = 10016, - CVMX_BOARD_TYPE_CUST_L2_ACCTON2_TX = 10017, - CVMX_BOARD_TYPE_CUST_L2_ACCTON2_RX = 10018, - CVMX_BOARD_TYPE_CUST_L2_WSTRNSNIC_TX = 10019, - CVMX_BOARD_TYPE_CUST_L2_WSTRNSNIC_RX = 10020, - CVMX_BOARD_TYPE_CUST_L2_ZINWELL = 10021, - CVMX_BOARD_TYPE_CUST_DEFINED_MAX = 20000, - - /* - * Set aside a range for customer private use. The SDK won't - * use any numbers in this range. - */ - CVMX_BOARD_TYPE_CUST_PRIVATE_MIN = 20001, - CVMX_BOARD_TYPE_UBNT_E100 = 20002, - CVMX_BOARD_TYPE_CUST_DSR1000N = 20006, - CVMX_BOARD_TYPE_KONTRON_S1901 = 21901, - CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000, - - /* The remaining range is reserved for future use. */ -}; - -enum cvmx_chip_types_enum { - CVMX_CHIP_TYPE_NULL = 0, - CVMX_CHIP_SIM_TYPE_DEPRECATED = 1, - CVMX_CHIP_TYPE_OCTEON_SAMPLE = 2, - CVMX_CHIP_TYPE_MAX, -}; - -/* - * Compatibility alias for NAC38 name change, planned to be removed - * from SDK 1.7 - */ -#define CVMX_BOARD_TYPE_NAO38 CVMX_BOARD_TYPE_NAC38 - -/* Functions to return string based on type */ -#define ENUM_BRD_TYPE_CASE(x) \ - case x: \ - return(#x + 16) /* Skip CVMX_BOARD_TYPE_ */ - -static inline const char *cvmx_board_type_to_string(enum - cvmx_board_types_enum type) -{ - switch (type) { - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NULL); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_SIM); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBT3000); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_KODAMA); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NIAGARA); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NAC38); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_THUNDER); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_TRANTOR); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBH3000); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBH3100); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_HIKARI); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CN3010_EVB_HS5); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CN3005_EVB_HS5); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_KBP); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CN3020_EVB_HS5); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBT5800); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NICPRO2); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBH5600); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBH5601); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBH5200); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_BBGW_REF); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NIC_XLE_4G); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBT5600); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBH5201); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBT5200); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CB5600); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CB5601); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CB5200); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_GENERIC); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBH5610); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_LANAI2_A); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_LANAI2_U); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBB5600); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBB6300); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NIC_XLE_10G); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_LANAI2_G); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBT5810); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NIC10E); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EP6300C); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBB6800); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NIC4E); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NIC2E); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBB6600); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_REDWING); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NIC68_4); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NIC10E_66); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_MAX); - - /* Customer boards listed here */ - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_DEFINED_MIN); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_WSX16); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_NS0216); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_NB5); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_WMR500); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_ITB101); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_NTE102); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_AGS103); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_GST104); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_GCT105); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_AGS106); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_SGM107); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_GCT108); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_AGS109); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_GCT110); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_L2_AIR_SENDER); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_L2_AIR_RECEIVER); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_L2_ACCTON2_TX); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_L2_ACCTON2_RX); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_L2_WSTRNSNIC_TX); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_L2_WSTRNSNIC_RX); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_L2_ZINWELL); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_DEFINED_MAX); - - /* Customer private range */ - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MIN); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E100); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_DSR1000N); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_KONTRON_S1901); - ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX); - } - - return NULL; -} - -#define ENUM_CHIP_TYPE_CASE(x) \ - case x: \ - return(#x + 15) /* Skip CVMX_CHIP_TYPE */ - -static inline const char *cvmx_chip_type_to_string(enum - cvmx_chip_types_enum type) -{ - switch (type) { - ENUM_CHIP_TYPE_CASE(CVMX_CHIP_TYPE_NULL); - ENUM_CHIP_TYPE_CASE(CVMX_CHIP_SIM_TYPE_DEPRECATED); - ENUM_CHIP_TYPE_CASE(CVMX_CHIP_TYPE_OCTEON_SAMPLE); - ENUM_CHIP_TYPE_CASE(CVMX_CHIP_TYPE_MAX); - } - - return "Unsupported Chip"; -} - #endif /* __CVMX_BOOTINFO_H__ */ diff --git a/arch/mips/mach-octeon/include/mach/cvmx-bootloader.h b/arch/mips/mach-octeon/include/mach/cvmx-bootloader.h new file mode 100644 index 0000000000..9abe021452 --- /dev/null +++ b/arch/mips/mach-octeon/include/mach/cvmx-bootloader.h @@ -0,0 +1,172 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2020 Marvell International Ltd. + */ + +/* + * Bootloader definitions that are shared with other programs + */ + +#ifndef __CVMX_BOOTLOADER__ +#define __CVMX_BOOTLOADER__ + +/* + * The bootloader_header_t structure defines the header that is present + * at the start of binary u-boot images. This header is used to locate + * the bootloader image in NAND, and also to allow verification of images + * for normal NOR booting. This structure is placed at the beginning of a + * bootloader binary image, and remains in the executable code. + */ +#define BOOTLOADER_HEADER_MAGIC 0x424f4f54 /* "BOOT" in ASCII */ + +#define BOOTLOADER_HEADER_COMMENT_LEN 64 +#define BOOTLOADER_HEADER_VERSION_LEN 64 +/* limited by the space to the next exception handler */ +#define BOOTLOADER_HEADER_MAX_SIZE 0x200 + +#define BOOTLOADER_HEADER_CURRENT_MAJOR_REV 1 +#define BOOTLOADER_HEADER_CURRENT_MINOR_REV 2 +/* + * Revision history + * 1.1 Initial released revision. (SDK 1.9) + * 1.2 TLB based relocatable image (SDK 2.0) + */ + +#ifndef __ASSEMBLY__ +struct bootloader_header { + uint32_t jump_instr; /* + * Jump to executable code following the + * header. This allows this header to be + * (and remain) part of the executable image) + */ + uint32_t nop_instr; /* Must be 0x0 */ + uint32_t magic; /* Magic number to identify header */ + uint32_t hcrc; /* CRC of all of header excluding this field */ + + uint16_t hlen; /* Length of header in bytes */ + uint16_t maj_rev; /* Major revision */ + uint16_t min_rev; /* Minor revision */ + uint16_t board_type; /* Board type that the image is for */ + + uint32_t dlen; /* Length of data (following header) in bytes */ + uint32_t dcrc; /* CRC of data */ + uint64_t address; /* Mips virtual address */ + uint32_t flags; + uint16_t image_type; /* Defined in bootloader_image_t enum */ + uint16_t resv0; /* pad */ + + uint32_t reserved1; + uint32_t reserved2; + uint32_t reserved3; + uint32_t reserved4; + + /* Optional, for descriptive purposes */ + char comment_string[BOOTLOADER_HEADER_COMMENT_LEN]; + /* Optional, for descriptive purposes */ + char version_string[BOOTLOADER_HEADER_VERSION_LEN]; +} __packed; + +/* Defines for flag field */ +#define BL_HEADER_FLAG_FAILSAFE 1 + +enum bootloader_image { + BL_HEADER_IMAGE_UNKNOWN = 0x0, + BL_HEADER_IMAGE_STAGE2, /* Binary bootloader stage2 image */ + BL_HEADER_IMAGE_STAGE3, /* Binary bootloader stage3 image */ + BL_HEADER_IMAGE_NOR, /* Binary bootloader for NOR boot */ + BL_HEADER_IMAGE_PCIBOOT, /* Binary bootloader for PCI boot */ + BL_HEADER_IMAGE_UBOOT_ENV, /* Environment for u-boot */ + /* Bootloader before U-Boot (stage 1/1.5) */ + BL_HEADER_IMAGE_PRE_UBOOT, + BL_HEADER_IMAGE_STAGE1, /* NOR stage 1 bootloader */ + BL_HEADER_IMAGE_MAX, + /* Range for customer private use. Will not be used by Cavium Inc. */ + BL_HEADER_IMAGE_CUST_RESERVED_MIN = 0x1000, + BL_HEADER_IMAGE_CUST_RESERVED_MAX = 0x1fff +}; + +#endif /* __ASSEMBLY__ */ + +/* + * Maximum address searched for NAND boot images and environments. + * This is used by stage1 and stage2. + */ +#define MAX_NAND_SEARCH_ADDR 0x800000 + +/* Maximum address to look for start of normal bootloader */ +#define MAX_NOR_SEARCH_ADDR 0x400000 + +/* + * Defines for RAM based environment set by the host or the previous + * bootloader in a chain boot configuration. + */ + +#define U_BOOT_RAM_ENV_ADDR 0x1000 +#define U_BOOT_RAM_ENV_SIZE 0x1000 +#define U_BOOT_RAM_ENV_CRC_SIZE 0x4 +#define U_BOOT_RAM_ENV_ADDR_2 (U_BOOT_RAM_ENV_ADDR + U_BOOT_RAM_ENV_SIZE) +/* Address of environment in L2 cache if booted from cache */ +#define U_BOOT_CACHE_ENV_ADDR 0x000ff000 +/* Size of environment in L2 cache */ +#define U_BOOT_CACHE_ENV_SIZE 0x1000 + +/* Board numbers and names */ + +/* Type defines for board and chip types */ +enum cvmx_board_types_enum { + CVMX_BOARD_TYPE_NULL = 0, + CVMX_BOARD_TYPE_SIM = 1, + /* Special 'generic' board type, supports many boards */ + CVMX_BOARD_TYPE_GENERIC = 28, + CVMX_BOARD_TYPE_EBB7304 = 76, + CVMX_BOARD_TYPE_MAX, + /* NOTE: 256-257 are being used by a customer. */ + + /* + * The range from CVMX_BOARD_TYPE_MAX to + * CVMX_BOARD_TYPE_CUST_DEFINED_MIN is reserved + * for future SDK use. + */ + + /* + * Set aside a range for customer boards. These numbers are managed + * by Cavium. + */ + CVMX_BOARD_TYPE_CUST_DEFINED_MIN = 10000, + CVMX_BOARD_TYPE_CUST_DEFINED_MAX = 20000, + + /* + * Set aside a range for customer private use. The SDK won't + * use any numbers in this range. + */ + CVMX_BOARD_TYPE_CUST_PRIVATE_MIN = 20001, + CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000, +}; + +/* Functions to return string based on type */ +/* Skip CVMX_BOARD_TYPE_ */ +#define ENUM_BRD_TYPE_CASE(x) case x: return(#x + 16) + +static inline const char +*cvmx_board_type_to_string(enum cvmx_board_types_enum type) +{ + switch (type) { + ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NULL); + ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_SIM); + ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_GENERIC); + ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBB7304); + ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_MAX); + + /* Customer boards listed here */ + ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_DEFINED_MIN); + ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_DEFINED_MAX); + + /* Customer private range */ + ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MIN); + ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX); + } + + return "Unsupported Board"; +} + +#endif /* __CVMX_BOOTLOADER__ */ diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 4ca1e2b325..f25ba1af09 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -116,7 +116,9 @@ #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_NUM_FM1_DTSEC 5 #define CONFIG_SYS_NUM_FM1_10GEC 1 +#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#endif #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #define CONFIG_SYS_FSL_TBCLK_DIV 32 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S index bbc737ed9a..8589509e01 100644 --- a/arch/riscv/cpu/start.S +++ b/arch/riscv/cpu/start.S @@ -123,7 +123,7 @@ call_board_init_f_0: * wait for initialization to complete. */ la t0, hart_lottery - li s2, 1 + li t1, 1 amoswap.w s2, t1, 0(t0) bnez s2, wait_for_gd_init #else diff --git a/arch/riscv/dts/k210-maix-bit.dts b/arch/riscv/dts/k210-maix-bit.dts index c2beec602c..e4dea205b2 100644 --- a/arch/riscv/dts/k210-maix-bit.dts +++ b/arch/riscv/dts/k210-maix-bit.dts @@ -152,7 +152,7 @@ pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>, <K210_FPIOA(27, K210_PCF_SPI1_SCLK)>, <K210_FPIOA(28, K210_PCF_SPI1_D0)>, - <K210_FPIOA(29, K210_PCF_GPIOHS13)>; + <K210_FPIOA(29, K210_PCF_GPIOHS13)>; /* cs */ }; }; @@ -160,3 +160,47 @@ pinctrl-0 = <&fpioa_dvp>; pinctrl-names = "default"; }; + +&spi0 { + pinctrl-0 = <&fpioa_spi0>; + pinctrl-names = "default"; + num-cs = <1>; + cs-gpios = <&gpio0 20 0>; + + panel@0 { + compatible = "sitronix,st7789v"; + reg = <0>; + reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + dc-gpios = <&gpio0 22 0>; + spi-max-frequency = <15000000>; + status = "disabled"; + }; +}; + +&spi1 { + pinctrl-0 = <&fpioa_spi1>; + pinctrl-names = "default"; + num-cs = <1>; + cs-gpios = <&gpio0 13 0>; + status = "okay"; + + slot@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + spi-max-frequency = <25000000>; + voltage-ranges = <3300 3300>; + broken-cd; + }; +}; + +&spi3 { + status = "okay"; + + spi-flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + broken-flash-reset; + }; +}; diff --git a/arch/riscv/dts/k210.dtsi b/arch/riscv/dts/k210.dtsi index 81ef8ca4f7..81b04018c6 100644 --- a/arch/riscv/dts/k210.dtsi +++ b/arch/riscv/dts/k210.dtsi @@ -284,7 +284,8 @@ }; spi2: spi@50240000 { - compatible = "kendryte,k120-spislave", + compatible = "canaan,kendryte-k210-spi", + "snps,dw-apb-ssi-4.01", "snps,dw-apb-ssi"; spi-slave; reg = <0x50240000 0x100>; @@ -495,6 +496,8 @@ interrupts = <24>; clocks = <&sysclk K210_CLK_DVP>; resets = <&sysrst K210_RST_DVP>; + kendryte,sysctl = <&sysctl>; + kendryte,misc-offset = <K210_SYSCTL_MISC>; status = "disabled"; }; @@ -557,7 +560,8 @@ spi0: spi@52000000 { #address-cells = <1>; #size-cells = <0>; - compatible = "kendryte,k210-spi", + compatible = "canaan,kendryte-k210-spi", + "snps,dw-apb-ssi-4.01", "snps,dw-apb-ssi"; reg = <0x52000000 0x100>; interrupts = <1>; @@ -573,7 +577,8 @@ spi1: spi@53000000 { #address-cells = <1>; #size-cells = <0>; - compatible = "kendryte,k210-spi", + compatible = "canaan,kendryte-k210-spi", + "snps,dw-apb-ssi-4.01", "snps,dw-apb-ssi"; reg = <0x53000000 0x100>; interrupts = <2>; @@ -589,8 +594,8 @@ spi3: spi@54000000 { #address-cells = <1>; #size-cells = <0>; - compatible = "kendryte,k210-spi", - "snps,dw-apb-ssi"; + compatible = "canaan,kendryte-k210-ssi", + "snps,dwc-ssi-1.01a"; reg = <0x54000000 0x200>; interrupts = <4>; clocks = <&sysclk K210_CLK_SPI3>; diff --git a/arch/riscv/lib/crt0_riscv_efi.S b/arch/riscv/lib/crt0_riscv_efi.S index 87fe1e56f9..e7c4d99c21 100644 --- a/arch/riscv/lib/crt0_riscv_efi.S +++ b/arch/riscv/lib/crt0_riscv_efi.S @@ -15,11 +15,13 @@ #define SAVE_LONG(reg, idx) sd reg, (idx*SIZE_LONG)(sp) #define LOAD_LONG(reg, idx) ld reg, (idx*SIZE_LONG)(sp) #define PE_MACHINE IMAGE_FILE_MACHINE_RISCV64 +#define PE_MAGIC IMAGE_NT_OPTIONAL_HDR64_MAGIC #else #define SIZE_LONG 4 #define SAVE_LONG(reg, idx) sw reg, (idx*SIZE_LONG)(sp) #define LOAD_LONG(reg, idx) lw reg, (idx*SIZE_LONG)(sp) #define PE_MACHINE IMAGE_FILE_MACHINE_RISCV32 +#define PE_MAGIC IMAGE_NT_OPTIONAL_HDR32_MAGIC #endif @@ -48,7 +50,7 @@ coff_header: IMAGE_FILE_LOCAL_SYMS_STRIPPED | \ IMAGE_FILE_DEBUG_STRIPPED) optional_header: - .short IMAGE_NT_OPTIONAL_HDR64_MAGIC /* PE32+ format */ + .short PE_MAGIC /* PE32(+) format */ .byte 0x02 /* MajorLinkerVersion */ .byte 0x14 /* MinorLinkerVersion */ .long _edata - _start /* SizeOfCode */ @@ -56,9 +58,16 @@ optional_header: .long 0 /* SizeOfUninitializedData */ .long _start - ImageBase /* AddressOfEntryPoint */ .long _start - ImageBase /* BaseOfCode */ +#if __riscv_xlen == 32 + .long 0 /* BaseOfData */ +#endif extra_header_fields: +#if __riscv_xlen == 32 + .long 0 /* ImageBase */ +#else .quad 0 /* ImageBase */ +#endif .long 0x20 /* SectionAlignment */ .long 0x8 /* FileAlignment */ .short 0 /* MajorOperatingSystemVersion */ @@ -78,10 +87,17 @@ extra_header_fields: .long 0 /* CheckSum */ .short IMAGE_SUBSYSTEM_EFI_APPLICATION /* Subsystem */ .short 0 /* DllCharacteristics */ +#if __riscv_xlen == 32 + .long 0 /* SizeOfStackReserve */ + .long 0 /* SizeOfStackCommit */ + .long 0 /* SizeOfHeapReserve */ + .long 0 /* SizeOfHeapCommit */ +#else .quad 0 /* SizeOfStackReserve */ .quad 0 /* SizeOfStackCommit */ .quad 0 /* SizeOfHeapReserve */ .quad 0 /* SizeOfHeapCommit */ +#endif .long 0 /* LoaderFlags */ .long 0x6 /* NumberOfRvaAndSizes */ @@ -91,6 +107,16 @@ extra_header_fields: .quad 0 /* ExceptionTable */ .quad 0 /* CertificationTable */ .quad 0 /* BaseRelocationTable */ + .quad 0 /* Debug */ + .quad 0 /* Architecture */ + .quad 0 /* Global Ptr */ + .quad 0 /* TLS Table */ + .quad 0 /* Load Config Table */ + .quad 0 /* Bound Import */ + .quad 0 /* IAT */ + .quad 0 /* Delay Import Descriptor */ + .quad 0 /* CLR Runtime Header */ + .quad 0 /* Reserved */ /* Section table */ section_table: diff --git a/arch/riscv/lib/interrupts.c b/arch/riscv/lib/interrupts.c index 35de98e8ce..fb3ce118c1 100644 --- a/arch/riscv/lib/interrupts.c +++ b/arch/riscv/lib/interrupts.c @@ -27,7 +27,7 @@ static void show_efi_loaded_images(uintptr_t epc) static void show_regs(struct pt_regs *regs) { #ifdef CONFIG_SHOW_REGS - printf("SP: " REG_FMT " GP: " REG_FMT " TP: " REG_FMT "\n", + printf("\nSP: " REG_FMT " GP: " REG_FMT " TP: " REG_FMT "\n", regs->sp, regs->gp, regs->tp); printf("T0: " REG_FMT " T1: " REG_FMT " T2: " REG_FMT "\n", regs->t0, regs->t1, regs->t2); @@ -45,7 +45,7 @@ static void show_regs(struct pt_regs *regs) regs->s7, regs->s8, regs->s9); printf("S10: " REG_FMT " S11: " REG_FMT " T3: " REG_FMT "\n", regs->s10, regs->s11, regs->t3); - printf("T4: " REG_FMT " T5: " REG_FMT " T6: " REG_FMT "\n\n", + printf("T4: " REG_FMT " T5: " REG_FMT " T6: " REG_FMT "\n", regs->t4, regs->t5, regs->t6); #endif } @@ -80,12 +80,12 @@ static void _exit_trap(ulong code, ulong epc, ulong tval, struct pt_regs *regs) epc, regs->ra, tval); /* Print relocation adjustments, but only if gd is initialized */ if (gd && gd->flags & GD_FLG_RELOC) - printf("EPC: " REG_FMT " RA: " REG_FMT " reloc adjusted\n\n", + printf("EPC: " REG_FMT " RA: " REG_FMT " reloc adjusted\n", epc - gd->reloc_off, regs->ra - gd->reloc_off); show_regs(regs); show_efi_loaded_images(epc); - hang(); + panic("\n"); } int interrupt_init(void) diff --git a/arch/x86/cpu/tangier/Kconfig b/arch/x86/cpu/tangier/Kconfig index 571470c74b..19aaf165d6 100644 --- a/arch/x86/cpu/tangier/Kconfig +++ b/arch/x86/cpu/tangier/Kconfig @@ -10,9 +10,11 @@ config INTEL_TANGIER imply MMC_SDHCI imply MMC_SDHCI_SDMA imply MMC_SDHCI_TANGIER + imply MISC imply USB + imply USB_XHCI_HCD imply USB_DWC3 - imply BINMAN + imply USB_DWC3_GENERIC if INTEL_TANGIER @@ -27,8 +29,4 @@ config SYS_CAR_SIZE Space in bytes in eSRAM used as Cache-As-RAM (CAR). Note this size must not exceed eSRAM's total size. -config SYS_USB_OTG_BASE - hex - default 0xf9100000 - endif diff --git a/arch/x86/cpu/tangier/sdram.c b/arch/x86/cpu/tangier/sdram.c index df3b9e4ec9..afb08476ed 100644 --- a/arch/x86/cpu/tangier/sdram.c +++ b/arch/x86/cpu/tangier/sdram.c @@ -196,6 +196,49 @@ unsigned int install_e820_map(unsigned int max_entries, return sfi_setup_e820(max_entries, entries); } +/* + * This function looks for the highest region of memory lower than 2GB which + * has enough space for U-Boot where U-Boot is aligned on a page boundary. It + * overrides the default implementation found elsewhere which simply picks the + * end of RAM, wherever that may be. The location of the stack, the relocation + * address, and how far U-Boot is moved by relocation are set in the global + * data structure. + */ +ulong board_get_usable_ram_top(ulong total_size) +{ + struct sfi_table_simple *sb; + struct sfi_mem_entry *mentry; + ulong dest_addr = 0; + u32 i; + + sb = sfi_search_mmap(); + if (!sb) + panic("No available memory found for relocation"); + + sfi_for_each_mentry(i, sb, mentry) { + unsigned long long start, end; + + if (mentry->type != SFI_MEM_CONV) + continue; + + start = mentry->phys_start; + end = start + (mentry->pages << 12); + + /* Filter memory over 2GB. */ + if (end > 0x7fffffffULL) + end = 0x80000000ULL; + /* Skip this region if it's too small. */ + if (end - start < total_size) + continue; + + /* Use this address if it's the largest so far. */ + if (end > dest_addr) + dest_addr = end; + } + + return dest_addr; +} + int dram_init_banksize(void) { sfi_get_bank_size(); diff --git a/arch/x86/dts/edison.dts b/arch/x86/dts/edison.dts index bc84bc892e..8d245bffc2 100644 --- a/arch/x86/dts/edison.dts +++ b/arch/x86/dts/edison.dts @@ -16,7 +16,7 @@ / { model = "Intel Edison"; - compatible = "intel,edison"; + compatible = "intel,edison", "intel,tangier"; aliases { serial0 = &serial0; @@ -105,6 +105,18 @@ reg = <0xff009000 0x1000>; }; + usb: usb@f9100000 { + compatible = "intel,tangier-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + + dwc3: dwc3 { + reg = <0xf9100000 0x100000>; + maximum-speed = "high-speed"; + dr_mode = "peripheral"; + }; + }; + watchdog: wdt@0 { compatible = "intel,tangier-wdt"; }; diff --git a/arch/x86/lib/zimage.c b/arch/x86/lib/zimage.c index f154827ec7..708025b207 100644 --- a/arch/x86/lib/zimage.c +++ b/arch/x86/lib/zimage.c @@ -61,8 +61,8 @@ * BZIMAGE_LOAD_ADDR or ZIMAGE_LOAD_ADDR * @base_ptr: Pointer to the boot parameters, typically at address * DEFAULT_SETUP_BASE - * @cmdline: Address of 'override' command line, or 0 to use the one in the - * setup block + * @cmdline: Environment variable containing the 'override' command line, or + * NULL to use the one in the setup block */ struct zboot_state { ulong bzimage_addr; @@ -71,7 +71,7 @@ struct zboot_state { ulong initrd_size; ulong load_address; struct boot_params *base_ptr; - ulong cmdline; + char *cmdline; } state; enum { @@ -420,7 +420,7 @@ static int do_zboot_start(struct cmd_tbl *cmdtp, int flag, int argc, state.bzimage_addr = 0; } if (argc >= 7) - state.cmdline = simple_strtoul(argv[6], NULL, 16); + state.cmdline = env_get(argv[6]); return 0; } @@ -466,7 +466,7 @@ static int do_zboot_setup(struct cmd_tbl *cmdtp, int flag, int argc, } ret = setup_zimage(base_ptr, (char *)base_ptr + COMMAND_LINE_OFFSET, 0, state.initrd_addr, state.initrd_size, - state.cmdline); + (ulong)state.cmdline); if (ret) { puts("Setting up boot parameters failed ...\n"); return CMD_RET_FAILURE; @@ -757,8 +757,9 @@ U_BOOT_CMDREP_COMPLETE( " initrd size - The size of the initrd image to use, if any.\n" " setup - The address of the kernel setup region, if this\n" " is not at addr\n" - " cmdline - The address of the kernel command line, to\n" - " override U-Boot's normal cmdline generation\n" + " cmdline - Environment variable containing the kernel\n" + " command line, to override U-Boot's normal\n" + " cmdline generation\n" "\n" "Sub-commands to do part of the zboot sequence:\n" "\tstart [addr [arg ...]] - specify arguments\n" |