summaryrefslogtreecommitdiff
path: root/arch/x86
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86')
-rw-r--r--arch/x86/Kconfig9
-rw-r--r--arch/x86/cpu/baytrail/early_uart.c10
-rw-r--r--arch/x86/cpu/qemu/Kconfig7
-rw-r--r--arch/x86/cpu/qemu/Makefile2
-rw-r--r--arch/x86/cpu/qemu/fw_cfg.c316
-rw-r--r--arch/x86/cpu/qemu/qemu.c29
-rw-r--r--arch/x86/dts/bayleybay.dts4
-rw-r--r--arch/x86/dts/broadwell_som-6896.dts4
-rw-r--r--arch/x86/dts/chromebook_link.dts4
-rw-r--r--arch/x86/dts/chromebox_panther.dts4
-rw-r--r--arch/x86/dts/crownbay.dts4
-rw-r--r--arch/x86/dts/galileo.dts4
-rw-r--r--arch/x86/dts/minnowmax.dts4
-rw-r--r--arch/x86/include/asm/arch-qemu/device.h2
-rw-r--r--arch/x86/include/asm/arch-qemu/qemu.h5
-rw-r--r--arch/x86/include/asm/fw_cfg.h70
-rw-r--r--arch/x86/include/asm/u-boot-x86.h2
-rw-r--r--arch/x86/lib/Makefile2
-rw-r--r--arch/x86/lib/acpi_table.c4
-rw-r--r--arch/x86/lib/fsp/fsp_support.c2
20 files changed, 452 insertions, 36 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f07567c81ac..a995e32bb98 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -358,6 +358,15 @@ config GENERATE_ACPI_TABLE
by the operating system. It defines platform-independent interfaces
for configuration and power management monitoring.
+config QEMU_ACPI_TABLE
+ bool "Load ACPI table from QEMU fw_cfg interface"
+ depends on GENERATE_ACPI_TABLE && QEMU
+ default y
+ help
+ By default, U-Boot generates its own ACPI tables. This option, if
+ enabled, disables U-Boot's version and loads ACPI tables generated
+ by QEMU.
+
config GENERATE_SMBIOS_TABLE
bool "Generate an SMBIOS (System Management BIOS) table"
default y
diff --git a/arch/x86/cpu/baytrail/early_uart.c b/arch/x86/cpu/baytrail/early_uart.c
index b64a3a90db4..471d592b49f 100644
--- a/arch/x86/cpu/baytrail/early_uart.c
+++ b/arch/x86/cpu/baytrail/early_uart.c
@@ -59,11 +59,15 @@ static void x86_pci_write_config32(int dev, unsigned int where, u32 value)
}
/* This can be called after memory-mapped PCI is working */
-int setup_early_uart(void)
+int setup_internal_uart(int enable)
{
- /* Enable the legacy UART hardware. */
+ /* Enable or disable the legacy UART hardware */
x86_pci_write_config32(PCI_DEV_CONFIG(0, LPC_DEV, LPC_FUNC), UART_CONT,
- 1);
+ enable);
+
+ /* All done for the disable part, so just return */
+ if (!enable)
+ return 0;
/*
* Set up the pads to the UART function. This allows the signals to
diff --git a/arch/x86/cpu/qemu/Kconfig b/arch/x86/cpu/qemu/Kconfig
index 4f9862194a9..6808c9a6b9a 100644
--- a/arch/x86/cpu/qemu/Kconfig
+++ b/arch/x86/cpu/qemu/Kconfig
@@ -17,4 +17,11 @@ config SYS_CAR_SIZE
hex
default 0x10000
+config ACPI_PM1_BASE
+ hex
+ default 0xe400
+ help
+ ACPI Power Managment 1 (PM1) i/o-mapped base address.
+ This device is defined in ACPI specification, with 16 bytes in size.
+
endif
diff --git a/arch/x86/cpu/qemu/Makefile b/arch/x86/cpu/qemu/Makefile
index 176ea54ae4e..801413a1cb1 100644
--- a/arch/x86/cpu/qemu/Makefile
+++ b/arch/x86/cpu/qemu/Makefile
@@ -8,4 +8,6 @@ ifndef CONFIG_EFI_STUB
obj-y += car.o dram.o
endif
obj-y += cpu.o fw_cfg.o qemu.o
+ifndef CONFIG_QEMU_ACPI_TABLE
obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi.o dsdt.o
+endif
diff --git a/arch/x86/cpu/qemu/fw_cfg.c b/arch/x86/cpu/qemu/fw_cfg.c
index 05992145cf0..5ea7a6e2e53 100644
--- a/arch/x86/cpu/qemu/fw_cfg.c
+++ b/arch/x86/cpu/qemu/fw_cfg.c
@@ -10,10 +10,16 @@
#include <malloc.h>
#include <asm/io.h>
#include <asm/fw_cfg.h>
+#include <asm/tables.h>
+#include <asm/e820.h>
+#include <linux/list.h>
+#include <memalign.h>
static bool fwcfg_present;
static bool fwcfg_dma_present;
+static LIST_HEAD(fw_list);
+
/* Read configuration item using fw_cfg PIO interface */
static void qemu_fwcfg_read_entry_pio(uint16_t entry,
uint32_t size, void *address)
@@ -162,29 +168,311 @@ static int qemu_fwcfg_setup_kernel(void *load_addr, void *initrd_addr)
return 0;
}
-static int qemu_fwcfg_list_firmware(void)
+static int qemu_fwcfg_read_firmware_list(void)
{
int i;
uint32_t count;
- struct fw_cfg_files *files;
+ struct fw_file *file;
+ struct list_head *entry;
+
+ /* don't read it twice */
+ if (!list_empty(&fw_list))
+ return 0;
qemu_fwcfg_read_entry(FW_CFG_FILE_DIR, 4, &count);
if (!count)
return 0;
count = be32_to_cpu(count);
- files = malloc(count * sizeof(struct fw_cfg_file));
- if (!files)
- return -ENOMEM;
-
- files->count = count;
- qemu_fwcfg_read_entry(FW_CFG_INVALID,
- count * sizeof(struct fw_cfg_file),
- files->files);
-
- for (i = 0; i < files->count; i++)
- printf("%-56s\n", files->files[i].name);
- free(files);
+ for (i = 0; i < count; i++) {
+ file = malloc(sizeof(*file));
+ if (!file) {
+ printf("error: allocating resource\n");
+ goto err;
+ }
+ qemu_fwcfg_read_entry(FW_CFG_INVALID,
+ sizeof(struct fw_cfg_file), &file->cfg);
+ file->addr = 0;
+ list_add_tail(&file->list, &fw_list);
+ }
+
+ return 0;
+
+err:
+ list_for_each(entry, &fw_list) {
+ file = list_entry(entry, struct fw_file, list);
+ free(file);
+ }
+
+ return -ENOMEM;
+}
+
+#ifdef CONFIG_QEMU_ACPI_TABLE
+static struct fw_file *qemu_fwcfg_find_file(const char *name)
+{
+ struct list_head *entry;
+ struct fw_file *file;
+
+ list_for_each(entry, &fw_list) {
+ file = list_entry(entry, struct fw_file, list);
+ if (!strcmp(file->cfg.name, name))
+ return file;
+ }
+
+ return NULL;
+}
+
+/*
+ * This function allocates memory for ACPI tables
+ *
+ * @entry : BIOS linker command entry which tells where to allocate memory
+ * (either high memory or low memory)
+ * @addr : The address that should be used for low memory allcation. If the
+ * memory allocation request is 'ZONE_HIGH' then this parameter will
+ * be ignored.
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_allocate(struct bios_linker_entry *entry,
+ unsigned long *addr)
+{
+ uint32_t size, align;
+ struct fw_file *file;
+ unsigned long aligned_addr;
+
+ align = le32_to_cpu(entry->alloc.align);
+ /* align must be power of 2 */
+ if (align & (align - 1)) {
+ printf("error: wrong alignment %u\n", align);
+ return -EINVAL;
+ }
+
+ file = qemu_fwcfg_find_file(entry->alloc.file);
+ if (!file) {
+ printf("error: can't find file %s\n", entry->alloc.file);
+ return -ENOENT;
+ }
+
+ size = be32_to_cpu(file->cfg.size);
+
+ /*
+ * ZONE_HIGH means we need to allocate from high memory, since
+ * malloc space is already at the end of RAM, so we directly use it.
+ * If allocation zone is ZONE_FSEG, then we use the 'addr' passed
+ * in which is low memory
+ */
+ if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH) {
+ aligned_addr = (unsigned long)memalign(align, size);
+ if (!aligned_addr) {
+ printf("error: allocating resource\n");
+ return -ENOMEM;
+ }
+ } else if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) {
+ aligned_addr = ALIGN(*addr, align);
+ } else {
+ printf("error: invalid allocation zone\n");
+ return -EINVAL;
+ }
+
+ debug("bios_linker_allocate: allocate file %s, size %u, zone %d, align %u, addr 0x%lx\n",
+ file->cfg.name, size, entry->alloc.zone, align, aligned_addr);
+
+ qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
+ size, (void *)aligned_addr);
+ file->addr = aligned_addr;
+
+ /* adjust address for low memory allocation */
+ if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG)
+ *addr = (aligned_addr + size);
+
+ return 0;
+}
+
+/*
+ * This function patches ACPI tables previously loaded
+ * by bios_linker_allocate()
+ *
+ * @entry : BIOS linker command entry which tells how to patch
+ * ACPI tables
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_add_pointer(struct bios_linker_entry *entry)
+{
+ struct fw_file *dest, *src;
+ uint32_t offset = le32_to_cpu(entry->pointer.offset);
+ uint64_t pointer = 0;
+
+ dest = qemu_fwcfg_find_file(entry->pointer.dest_file);
+ if (!dest || !dest->addr)
+ return -ENOENT;
+ src = qemu_fwcfg_find_file(entry->pointer.src_file);
+ if (!src || !src->addr)
+ return -ENOENT;
+
+ debug("bios_linker_add_pointer: dest->addr 0x%lx, src->addr 0x%lx, offset 0x%x size %u, 0x%llx\n",
+ dest->addr, src->addr, offset, entry->pointer.size, pointer);
+
+ memcpy(&pointer, (char *)dest->addr + offset, entry->pointer.size);
+ pointer = le64_to_cpu(pointer);
+ pointer += (unsigned long)src->addr;
+ pointer = cpu_to_le64(pointer);
+ memcpy((char *)dest->addr + offset, &pointer, entry->pointer.size);
+
+ return 0;
+}
+
+/*
+ * This function updates checksum fields of ACPI tables previously loaded
+ * by bios_linker_allocate()
+ *
+ * @entry : BIOS linker command entry which tells where to update ACPI table
+ * checksums
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_add_checksum(struct bios_linker_entry *entry)
+{
+ struct fw_file *file;
+ uint8_t *data, cksum = 0;
+ uint8_t *cksum_start;
+
+ file = qemu_fwcfg_find_file(entry->cksum.file);
+ if (!file || !file->addr)
+ return -ENOENT;
+
+ data = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.offset));
+ cksum_start = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.start));
+ cksum = table_compute_checksum(cksum_start,
+ le32_to_cpu(entry->cksum.length));
+ *data = cksum;
+
+ return 0;
+}
+
+unsigned install_e820_map(unsigned max_entries, struct e820entry *entries)
+{
+ entries[0].addr = 0;
+ entries[0].size = ISA_START_ADDRESS;
+ entries[0].type = E820_RAM;
+
+ entries[1].addr = ISA_START_ADDRESS;
+ entries[1].size = ISA_END_ADDRESS - ISA_START_ADDRESS;
+ entries[1].type = E820_RESERVED;
+
+ /*
+ * since we use memalign(malloc) to allocate high memory for
+ * storing ACPI tables, we need to reserve them in e820 tables,
+ * otherwise kernel will reclaim them and data will be corrupted
+ */
+ entries[2].addr = ISA_END_ADDRESS;
+ entries[2].size = gd->relocaddr - TOTAL_MALLOC_LEN - ISA_END_ADDRESS;
+ entries[2].type = E820_RAM;
+
+ /* for simplicity, reserve entire malloc space */
+ entries[3].addr = gd->relocaddr - TOTAL_MALLOC_LEN;
+ entries[3].size = TOTAL_MALLOC_LEN;
+ entries[3].type = E820_RESERVED;
+
+ entries[4].addr = gd->relocaddr;
+ entries[4].size = gd->ram_size - gd->relocaddr;
+ entries[4].type = E820_RESERVED;
+
+ entries[5].addr = CONFIG_PCIE_ECAM_BASE;
+ entries[5].size = CONFIG_PCIE_ECAM_SIZE;
+ entries[5].type = E820_RESERVED;
+
+ return 6;
+}
+
+/* This function loads and patches ACPI tables provided by QEMU */
+unsigned long write_acpi_tables(unsigned long addr)
+{
+ int i, ret = 0;
+ struct fw_file *file;
+ struct bios_linker_entry *table_loader;
+ struct bios_linker_entry *entry;
+ uint32_t size;
+ struct list_head *list;
+
+ /* make sure fw_list is loaded */
+ ret = qemu_fwcfg_read_firmware_list();
+ if (ret) {
+ printf("error: can't read firmware file list\n");
+ return addr;
+ }
+
+ file = qemu_fwcfg_find_file("etc/table-loader");
+ if (!file) {
+ printf("error: can't find etc/table-loader\n");
+ return addr;
+ }
+
+ size = be32_to_cpu(file->cfg.size);
+ if ((size % sizeof(*entry)) != 0) {
+ printf("error: table-loader maybe corrupted\n");
+ return addr;
+ }
+
+ table_loader = malloc(size);
+ if (!table_loader) {
+ printf("error: no memory for table-loader\n");
+ return addr;
+ }
+
+ qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
+ size, table_loader);
+
+ for (i = 0; i < (size / sizeof(*entry)); i++) {
+ entry = table_loader + i;
+ switch (le32_to_cpu(entry->command)) {
+ case BIOS_LINKER_LOADER_COMMAND_ALLOCATE:
+ ret = bios_linker_allocate(entry, &addr);
+ if (ret)
+ goto out;
+ break;
+ case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER:
+ ret = bios_linker_add_pointer(entry);
+ if (ret)
+ goto out;
+ break;
+ case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM:
+ ret = bios_linker_add_checksum(entry);
+ if (ret)
+ goto out;
+ break;
+ default:
+ break;
+ }
+ }
+
+out:
+ if (ret) {
+ list_for_each(list, &fw_list) {
+ file = list_entry(list, struct fw_file, list);
+ if (file->addr)
+ free((void *)file->addr);
+ }
+ }
+
+ free(table_loader);
+ return addr;
+}
+#endif
+
+static int qemu_fwcfg_list_firmware(void)
+{
+ int ret;
+ struct list_head *entry;
+ struct fw_file *file;
+
+ /* make sure fw_list is loaded */
+ ret = qemu_fwcfg_read_firmware_list();
+ if (ret)
+ return ret;
+
+ list_for_each(entry, &fw_list) {
+ file = list_entry(entry, struct fw_file, list);
+ printf("%-56s\n", file->cfg.name);
+ }
+
return 0;
}
diff --git a/arch/x86/cpu/qemu/qemu.c b/arch/x86/cpu/qemu/qemu.c
index 5a7b92944a2..f8af566deae 100644
--- a/arch/x86/cpu/qemu/qemu.c
+++ b/arch/x86/cpu/qemu/qemu.c
@@ -15,6 +15,31 @@
static bool i440fx;
+static void enable_pm_piix(void)
+{
+ u8 en;
+ u16 cmd;
+
+ /* Set the PM I/O base */
+ x86_pci_write_config32(PIIX_PM, PMBA, CONFIG_ACPI_PM1_BASE | 1);
+
+ /* Enable access to the PM I/O space */
+ cmd = x86_pci_read_config16(PIIX_PM, PCI_COMMAND);
+ cmd |= PCI_COMMAND_IO;
+ x86_pci_write_config16(PIIX_PM, PCI_COMMAND, cmd);
+
+ /* PM I/O Space Enable (PMIOSE) */
+ en = x86_pci_read_config8(PIIX_PM, PMREGMISC);
+ en |= PMIOSE;
+ x86_pci_write_config8(PIIX_PM, PMREGMISC, en);
+}
+
+static void enable_pm_ich9(void)
+{
+ /* Set the PM I/O base */
+ x86_pci_write_config32(ICH9_PM, PMBA, CONFIG_ACPI_PM1_BASE | 1);
+}
+
static void qemu_chipset_init(void)
{
u16 device, xbcs;
@@ -53,10 +78,14 @@ static void qemu_chipset_init(void)
xbcs = x86_pci_read_config16(PIIX_ISA, XBCS);
xbcs |= APIC_EN;
x86_pci_write_config16(PIIX_ISA, XBCS, xbcs);
+
+ enable_pm_piix();
} else {
/* Configure PCIe ECAM base address */
x86_pci_write_config32(PCI_BDF(0, 0, 0), PCIEX_BAR,
CONFIG_PCIE_ECAM_BASE | BAR_EN);
+
+ enable_pm_ich9();
}
qemu_fwcfg_init();
diff --git a/arch/x86/dts/bayleybay.dts b/arch/x86/dts/bayleybay.dts
index 9bf707bf0e8..fbca46762c5 100644
--- a/arch/x86/dts/bayleybay.dts
+++ b/arch/x86/dts/bayleybay.dts
@@ -21,7 +21,7 @@
aliases {
serial0 = &serial;
- spi0 = "/spi";
+ spi0 = &spi;
};
config {
@@ -184,7 +184,7 @@
>;
};
- spi {
+ spi: spi {
#address-cells = <1>;
#size-cells = <0>;
compatible = "intel,ich-spi";
diff --git a/arch/x86/dts/broadwell_som-6896.dts b/arch/x86/dts/broadwell_som-6896.dts
index 4e9e410b706..7b2c51504b1 100644
--- a/arch/x86/dts/broadwell_som-6896.dts
+++ b/arch/x86/dts/broadwell_som-6896.dts
@@ -10,7 +10,7 @@
compatible = "advantech,som-6896", "intel,broadwell";
aliases {
- spi0 = "/spi";
+ spi0 = &spi;
};
config {
@@ -34,7 +34,7 @@
reg = <0x0000f800 0 0 0 0>;
compatible = "intel,pch9";
- spi {
+ spi: spi {
#address-cells = <1>;
#size-cells = <0>;
compatible = "intel,ich-spi";
diff --git a/arch/x86/dts/chromebook_link.dts b/arch/x86/dts/chromebook_link.dts
index d148d6e349c..58072031df8 100644
--- a/arch/x86/dts/chromebook_link.dts
+++ b/arch/x86/dts/chromebook_link.dts
@@ -11,7 +11,7 @@
compatible = "google,link", "intel,celeron-ivybridge";
aliases {
- spi0 = "/pci/pch/spi";
+ spi0 = &spi;
usb0 = &usb_0;
usb1 = &usb_1;
};
@@ -252,7 +252,7 @@
/* Enable EC SMI source */
intel,alt-gp-smi-enable = <0x0100>;
- spi {
+ spi: spi {
#address-cells = <1>;
#size-cells = <0>;
compatible = "intel,ich-spi";
diff --git a/arch/x86/dts/chromebox_panther.dts b/arch/x86/dts/chromebox_panther.dts
index 23027016e57..48f0c77d458 100644
--- a/arch/x86/dts/chromebox_panther.dts
+++ b/arch/x86/dts/chromebox_panther.dts
@@ -10,7 +10,7 @@
compatible = "google,panther", "intel,haswell";
aliases {
- spi0 = "/spi";
+ spi0 = &spi;
};
config {
@@ -56,7 +56,7 @@
reg = <0x0000f800 0 0 0 0>;
compatible = "intel,pch9";
- spi {
+ spi: spi {
#address-cells = <1>;
#size-cells = <0>;
compatible = "intel,ich-spi";
diff --git a/arch/x86/dts/crownbay.dts b/arch/x86/dts/crownbay.dts
index d6dd0b49f0f..47fab0fda67 100644
--- a/arch/x86/dts/crownbay.dts
+++ b/arch/x86/dts/crownbay.dts
@@ -19,7 +19,7 @@
compatible = "intel,crownbay", "intel,queensbay";
aliases {
- spi0 = "/spi";
+ spi0 = &spi;
};
config {
@@ -227,7 +227,7 @@
>;
};
- spi {
+ spi: spi {
#address-cells = <1>;
#size-cells = <0>;
compatible = "intel,ich-spi";
diff --git a/arch/x86/dts/galileo.dts b/arch/x86/dts/galileo.dts
index a2f5a1f2234..dd75fc4dc96 100644
--- a/arch/x86/dts/galileo.dts
+++ b/arch/x86/dts/galileo.dts
@@ -18,7 +18,7 @@
compatible = "intel,galileo", "intel,quark";
aliases {
- spi0 = "/spi";
+ spi0 = &spi;
};
config {
@@ -115,7 +115,7 @@
>;
};
- spi {
+ spi: spi {
#address-cells = <1>;
#size-cells = <0>;
compatible = "intel,ich-spi";
diff --git a/arch/x86/dts/minnowmax.dts b/arch/x86/dts/minnowmax.dts
index e7ef7c987b6..7afdf6c30ba 100644
--- a/arch/x86/dts/minnowmax.dts
+++ b/arch/x86/dts/minnowmax.dts
@@ -20,7 +20,7 @@
aliases {
serial0 = &serial;
- spi0 = "/spi";
+ spi0 = &spi;
};
config {
@@ -218,7 +218,7 @@
>;
};
- spi {
+ spi: spi {
#address-cells = <1>;
#size-cells = <0>;
compatible = "intel,ich-spi";
diff --git a/arch/x86/include/asm/arch-qemu/device.h b/arch/x86/include/asm/arch-qemu/device.h
index 75a435e67b9..38ab798994f 100644
--- a/arch/x86/include/asm/arch-qemu/device.h
+++ b/arch/x86/include/asm/arch-qemu/device.h
@@ -13,6 +13,8 @@
#define PIIX_ISA PCI_BDF(0, 1, 0)
#define PIIX_IDE PCI_BDF(0, 1, 1)
#define PIIX_USB PCI_BDF(0, 1, 2)
+#define PIIX_PM PCI_BDF(0, 1, 3)
+#define ICH9_PM PCI_BDF(0, 0x1f, 0)
#define I440FX_VGA PCI_BDF(0, 2, 0)
#define QEMU_Q35 PCI_BDF(0, 0, 0)
diff --git a/arch/x86/include/asm/arch-qemu/qemu.h b/arch/x86/include/asm/arch-qemu/qemu.h
index b67d3428ee6..a85eee8ec6d 100644
--- a/arch/x86/include/asm/arch-qemu/qemu.h
+++ b/arch/x86/include/asm/arch-qemu/qemu.h
@@ -33,4 +33,9 @@
#define LOW_RAM_ADDR 0x34
#define HIGH_RAM_ADDR 0x35
+/* PM registers */
+#define PMBA 0x40
+#define PMREGMISC 0x80
+#define PMIOSE (1 << 0)
+
#endif /* _ARCH_QEMU_H_ */
diff --git a/arch/x86/include/asm/fw_cfg.h b/arch/x86/include/asm/fw_cfg.h
index fb110fa8e78..e9450c61968 100644
--- a/arch/x86/include/asm/fw_cfg.h
+++ b/arch/x86/include/asm/fw_cfg.h
@@ -12,6 +12,8 @@
#define FW_DMA_PORT_LOW 0x514
#define FW_DMA_PORT_HIGH 0x518
+#include <linux/list.h>
+
enum qemu_fwcfg_items {
FW_CFG_SIGNATURE = 0x00,
FW_CFG_ID = 0x01,
@@ -45,11 +47,23 @@ enum qemu_fwcfg_items {
FW_CFG_INVALID = 0xffff,
};
+enum {
+ BIOS_LINKER_LOADER_COMMAND_ALLOCATE = 0x1,
+ BIOS_LINKER_LOADER_COMMAND_ADD_POINTER = 0x2,
+ BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM = 0x3,
+};
+
+enum {
+ BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH = 0x1,
+ BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG = 0x2,
+};
+
#define FW_CFG_FILE_SLOTS 0x10
#define FW_CFG_MAX_ENTRY (FW_CFG_FILE_FIRST + FW_CFG_FILE_SLOTS)
#define FW_CFG_ENTRY_MASK ~(FW_CFG_WRITE_CHANNEL | FW_CFG_ARCH_LOCAL)
#define FW_CFG_MAX_FILE_PATH 56
+#define BIOS_LINKER_LOADER_FILESZ FW_CFG_MAX_FILE_PATH
#define QEMU_FW_CFG_SIGNATURE (('Q' << 24) | ('E' << 16) | ('M' << 8) | 'U')
@@ -67,9 +81,10 @@ struct fw_cfg_file {
char name[FW_CFG_MAX_FILE_PATH];
};
-struct fw_cfg_files {
- __be32 count;
- struct fw_cfg_file files[];
+struct fw_file {
+ struct fw_cfg_file cfg; /* firmware file information */
+ unsigned long addr; /* firmware file in-memory address */
+ struct list_head list; /* list node to link to fw_list */
};
struct fw_cfg_dma_access {
@@ -78,6 +93,55 @@ struct fw_cfg_dma_access {
__be64 address;
};
+struct bios_linker_entry {
+ __le32 command;
+ union {
+ /*
+ * COMMAND_ALLOCATE - allocate a table from @alloc.file
+ * subject to @alloc.align alignment (must be power of 2)
+ * and @alloc.zone (can be HIGH or FSEG) requirements.
+ *
+ * Must appear exactly once for each file, and before
+ * this file is referenced by any other command.
+ */
+ struct {
+ char file[BIOS_LINKER_LOADER_FILESZ];
+ __le32 align;
+ uint8_t zone;
+ } alloc;
+
+ /*
+ * COMMAND_ADD_POINTER - patch the table (originating from
+ * @dest_file) at @pointer.offset, by adding a pointer to the
+ * table originating from @src_file. 1,2,4 or 8 byte unsigned
+ * addition is used depending on @pointer.size.
+ */
+ struct {
+ char dest_file[BIOS_LINKER_LOADER_FILESZ];
+ char src_file[BIOS_LINKER_LOADER_FILESZ];
+ __le32 offset;
+ uint8_t size;
+ } pointer;
+
+ /*
+ * COMMAND_ADD_CHECKSUM - calculate checksum of the range
+ * specified by @cksum_start and @cksum_length fields,
+ * and then add the value at @cksum.offset.
+ * Checksum simply sums -X for each byte X in the range
+ * using 8-bit math.
+ */
+ struct {
+ char file[BIOS_LINKER_LOADER_FILESZ];
+ __le32 offset;
+ __le32 start;
+ __le32 length;
+ } cksum;
+
+ /* padding */
+ char pad[124];
+ };
+} __packed;
+
/**
* Initialize QEMU fw_cfg interface
*/
diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h
index 9c143caf670..031740b708a 100644
--- a/arch/x86/include/asm/u-boot-x86.h
+++ b/arch/x86/include/asm/u-boot-x86.h
@@ -45,7 +45,7 @@ void dram_init_banksize(void);
int default_print_cpuinfo(void);
/* Set up a UART which can be used with printch(), printhex8(), etc. */
-int setup_early_uart(void);
+int setup_internal_uart(int enable);
void setup_pcat_compatibility(void);
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index d9fc296b6e4..50bc69a659f 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -32,7 +32,9 @@ obj-$(CONFIG_X86_RAMTEST) += ramtest.o
obj-y += sfi.o
obj-$(CONFIG_GENERATE_SMBIOS_TABLE) += smbios.o
obj-y += string.o
+ifndef CONFIG_QEMU_ACPI_TABLE
obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi_table.o
+endif
obj-y += tables.o
obj-$(CONFIG_CMD_ZBOOT) += zimage.o
obj-$(CONFIG_HAVE_FSP) += fsp/
diff --git a/arch/x86/lib/acpi_table.c b/arch/x86/lib/acpi_table.c
index ab1db7ec26e..2ec5ad2fa4a 100644
--- a/arch/x86/lib/acpi_table.c
+++ b/arch/x86/lib/acpi_table.c
@@ -331,6 +331,10 @@ static void acpi_create_ssdt_generator(acpi_header_t *ssdt,
ssdt->checksum = table_compute_checksum((void *)ssdt, ssdt->length);
}
+/*
+ * QEMU's version of write_acpi_tables is defined in
+ * arch/x86/cpu/qemu/fw_cfg.c
+ */
unsigned long write_acpi_tables(unsigned long start)
{
unsigned long current;
diff --git a/arch/x86/lib/fsp/fsp_support.c b/arch/x86/lib/fsp/fsp_support.c
index 875c96a8f19..29fa06098d1 100644
--- a/arch/x86/lib/fsp/fsp_support.c
+++ b/arch/x86/lib/fsp/fsp_support.c
@@ -111,7 +111,7 @@ void fsp_init(u32 stack_top, u32 boot_mode, void *nvs_buf)
#endif
#ifdef CONFIG_DEBUG_UART
- setup_early_uart();
+ setup_internal_uart(1);
#endif
fsp_hdr = find_fsp_header();
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-18 02:21:34 +0000