diff options
Diffstat (limited to 'arch/powerpc')
| -rw-r--r-- | arch/powerpc/cpu/mpc83xx/Kconfig | 1 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc83xx/cpu_init.c | 1 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc83xx/elbc/Kconfig | 32 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0 | 733 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1 | 733 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2 | 733 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3 | 733 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4 | 733 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc83xx/elbc/elbc.h | 186 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc83xx/spl_minimal.c | 1 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc8xxx/fsl_lbc.c | 4 |
11 files changed, 3890 insertions, 0 deletions
diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index 8c84196b978..474572f245e 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -285,6 +285,7 @@ config ARCH_MPC837X source "arch/powerpc/cpu/mpc83xx/hrcw/Kconfig" source "arch/powerpc/cpu/mpc83xx/bats/Kconfig" source "arch/powerpc/cpu/mpc83xx/lblaw/Kconfig" +source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig" menu "Legacy options" diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c index 91451e7b304..5ce7b794b26 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c @@ -13,6 +13,7 @@ #endif #include "lblaw/lblaw.h" +#include "elbc/elbc.h" DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig new file mode 100644 index 00000000000..74c4ff3ed43 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig @@ -0,0 +1,32 @@ +menu "ELBC register setup" + +choice + prompt "OR/BR for NAND SPL" + +config ELBC_BR_OR_NAND_PRELIM_NONE + bool "None" + +config ELBC_BR_OR_NAND_PRELIM_0 + bool "0" + +config ELBC_BR_OR_NAND_PRELIM_1 + bool "1" + +config ELBC_BR_OR_NAND_PRELIM_2 + bool "2" + +config ELBC_BR_OR_NAND_PRELIM_3 + bool "3" + +config ELBC_BR_OR_NAND_PRELIM_4 + bool "4" + +endchoice + +source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0" +source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1" +source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2" +source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3" +source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4" + +endmenu diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0 new file mode 100644 index 00000000000..23e81ab0bf9 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0 @@ -0,0 +1,733 @@ +menuconfig ELBC_BR0_OR0 + bool "ELBC BR0/OR0" + +if ELBC_BR0_OR0 + +config BR0_OR0_NAME + string "Identifier" + +config BR0_OR0_BASE + hex "Port base" + +choice + prompt "Port size" + +config BR0_PORTSIZE_8BIT + bool "8-bit" + +config BR0_PORTSIZE_16BIT + depends on !BR0_MACHINE_FCM + bool "16-bit" + + +config BR0_PORTSIZE_32BIT + depends on !BR0_MACHINE_FCM + depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379 + bool "32-bit" + +endchoice + +if BR0_MACHINE_FCM + +choice + prompt "Data Error Checking" + +config BR0_ERRORCHECKING_DISABLED + bool "Disabled" + +config BR0_ERRORCHECKING_ECC_CHECKING + bool "ECC checking / No ECC generation" + +config BR0_ERRORCHECKING_BOTH + bool "ECC checking and generation" + +endchoice + +endif + +config BR0_WRITE_PROTECT + bool "Write-protect" + +config BR0_MACHINE_UPM + bool + +choice + prompt "Machine select" + +config BR0_MACHINE_GPCM + bool "GPCM" + +config BR0_MACHINE_FCM + depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360 + bool "FCM" + +config BR0_MACHINE_SDRAM + depends on ARCH_MPC8349 || ARCH_MPC8360 + bool "SDRAM" + +config BR0_MACHINE_UPMA + select BR0_MACHINE_UPM + bool "UPM (A)" + +config BR0_MACHINE_UPMB + select BR0_MACHINE_UPM + bool "UPM (B)" + +config BR0_MACHINE_UPMC + select BR0_MACHINE_UPM + bool "UPM (C)" + +endchoice + +if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360 + +choice + prompt "Atomic operations" + +config BR0_ATOMIC_NONE + bool "No atomic operations" + +config BR0_ATOMIC_RAWA + bool "Read-after-write-atomic" + +config BR0_ATOMIC_WARA + bool "Write-after-read-atomic" + +endchoice + +endif + +if BR0_MACHINE_GPCM || BR0_MACHINE_FCM || BR0_MACHINE_UPM || BR0_MACHINE_SDRAM + +choice + prompt "Address mask" + +config OR0_AM_32_KBYTES + depends on !BR0_MACHINE_SDRAM + bool "32 kb" + +config OR0_AM_64_KBYTES + bool "64 kb" + +config OR0_AM_128_KBYTES + bool "128 kb" + +config OR0_AM_256_KBYTES + bool "256 kb" + +config OR0_AM_512_KBYTES + bool "512 kb" + +config OR0_AM_1_MBYTES + bool "1 mb" + +config OR0_AM_2_MBYTES + bool "2 mb" + +config OR0_AM_4_MBYTES + bool "4 mb" + +config OR0_AM_8_MBYTES + bool "8 mb" + +config OR0_AM_16_MBYTES + bool "16 mb" + +config OR0_AM_32_MBYTES + bool "32 mb" + +config OR0_AM_64_MBYTES + bool "64 mb" + +# XXX: Some boards define 128MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR0_AM_128_MBYTES + bool "128 mb" + +# XXX: Some boards define 256MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR0_AM_256_MBYTES + bool "256 mb" + +config OR0_AM_512_MBYTES + depends on BR0_MACHINE_FCM + bool "512 mb" + +# XXX: Some boards define 1GB AM with GPCM, even though it should not be +# possible according to the manuals +config OR0_AM_1_GBYTES + bool "1 gb" + +config OR0_AM_2_GBYTES + depends on BR0_MACHINE_FCM + bool "2 gb" + +config OR0_AM_4_GBYTES + depends on BR0_MACHINE_FCM + bool "4 gb" + +endchoice + +config OR0_XAM_SET + bool "Set unused bytes after address mask" +choice + prompt "Buffer control disable" + +config OR0_BCTLD_ASSERTED + bool "Asserted" + +config OR0_BCTLD_NOT_ASSERTED + bool "Not asserted" + +endchoice + +endif + +if BR0_MACHINE_GPCM || BR0_MACHINE_FCM + +choice + prompt "Cycle length in bus clocks" + +config OR0_SCY_0 + bool "No wait states" + +config OR0_SCY_1 + bool "1 wait state" + +config OR0_SCY_2 + bool "2 wait states" + +config OR0_SCY_3 + bool "3 wait states" + +config OR0_SCY_4 + bool "4 wait states" + +config OR0_SCY_5 + bool "5 wait states" + +config OR0_SCY_6 + bool "6 wait states" + +config OR0_SCY_7 + bool "7 wait states" + +config OR0_SCY_8 + depends on BR0_MACHINE_GPCM + bool "8 wait states" + +config OR0_SCY_9 + depends on BR0_MACHINE_GPCM + bool "9 wait states" + +config OR0_SCY_10 + depends on BR0_MACHINE_GPCM + bool "10 wait states" + +config OR0_SCY_11 + depends on BR0_MACHINE_GPCM + bool "11 wait states" + +config OR0_SCY_12 + depends on BR0_MACHINE_GPCM + bool "12 wait states" + +config OR0_SCY_13 + depends on BR0_MACHINE_GPCM + bool "13 wait states" + +config OR0_SCY_14 + depends on BR0_MACHINE_GPCM + bool "14 wait states" + +config OR0_SCY_15 + depends on BR0_MACHINE_GPCM + bool "15 wait states" + +endchoice + +endif # BR0_MACHINE_GPCM || BR0_MACHINE_FCM + +if BR0_MACHINE_GPCM + +choice + prompt "Chip select negotiation time" + +config OR0_CSNT_NORMAL + bool "Normal" + +config OR0_CSNT_EARLIER + bool "Earlier" + +endchoice + +choice + prompt "Address to chip-select setup" + +config OR0_ACS_SAME_TIME + bool "At the same time" + +config OR0_ACS_HALF_CYCLE_EARLIER + bool "Half of a bus clock cycle earlier" + +config OR0_ACS_QUARTER_CYCLE_EARLIER + bool "Half/Quarter of a bus clock cycle earlier" + +endchoice + +choice + prompt "Extra address to check-select setup" + +config OR0_XACS_NORMAL + bool "Normal" + +config OR0_XACS_EXTENDED + bool "Extended" + +endchoice + +choice + prompt "External address termination" + +config OR0_SETA_INTERNAL + bool "Access is terminated internally" + +config OR0_SETA_EXTERNAL + bool "Access is terminated externally" + +endchoice + +endif # BR0_MACHINE_GPCM + +if BR0_MACHINE_FCM + +choice + prompt "NAND Flash EEPROM page size" + +config OR0_PGS_SMALL + bool "Small page device" + +config OR0_PGS_LARGE + bool "Large page device" + +endchoice + +choice + prompt "Chip select to command time" + +config OR0_CSCT_1_CYCLE + depends on OR0_TRLX_NORMAL + bool "1 cycle" + +config OR0_CSCT_2_CYCLE + depends on OR0_TRLX_RELAXED + bool "2 cycles" + +config OR0_CSCT_4_CYCLE + depends on OR0_TRLX_NORMAL + bool "4 cycles" + +config OR0_CSCT_8_CYCLE + depends on OR0_TRLX_RELAXED + bool "8 cycles" + +endchoice + +choice + prompt "Command setup time" + +config OR0_CST_COINCIDENT + depends on OR0_TRLX_NORMAL + bool "Coincident with any command" + +config OR0_CST_QUARTER_CLOCK + depends on OR0_TRLX_NORMAL + bool "0.25 clocks after" + +config OR0_CST_HALF_CLOCK + depends on OR0_TRLX_RELAXED + bool "0.5 clocks after" + +config OR0_CST_ONE_CLOCK + depends on OR0_TRLX_RELAXED + bool "1 clock after" + +endchoice + +choice + prompt "Command hold time" + +config OR0_CHT_HALF_CLOCK + depends on OR0_TRLX_NORMAL + bool "0.5 clocks before" + +config OR0_CHT_ONE_CLOCK + depends on OR0_TRLX_NORMAL + bool "1 clock before" + +config OR0_CHT_ONE_HALF_CLOCK + depends on OR0_TRLX_RELAXED + bool "1.5 clocks before" + +config OR0_CHT_TWO_CLOCK + depends on OR0_TRLX_RELAXED + bool "2 clocks before" + +endchoice + +choice + prompt "Reset setup time" + +config OR0_RST_THREE_QUARTER_CLOCK + depends on OR0_TRLX_NORMAL + bool "0.75 clocks prior" + +config OR0_RST_ONE_HALF_CLOCK + depends on OR0_TRLX_RELAXED + bool "0.5 clocks prior" + +config OR0_RST_ONE_CLOCK + bool "1 clock prior" + +endchoice + +endif # BR0_MACHINE_FCM + +if BR0_MACHINE_UPM + +choice + prompt "Burst inhibit" + +config OR0_BI_BURSTSUPPORT + bool "Support burst access" + +config OR0_BI_BURSTINHIBIT + bool "Inhibit burst access" + +endchoice + +endif # BR0_MACHINE_UPM + +if BR0_MACHINE_SDRAM + +choice + prompt "Number of column address lines" + +config OR0_COLS_7 + bool "7" + +config OR0_COLS_8 + bool "8" + +config OR0_COLS_9 + bool "9" + +config OR0_COLS_10 + bool "10" + +config OR0_COLS_11 + bool "11" + +config OR0_COLS_12 + bool "12" + +config OR0_COLS_13 + bool "13" + +config OR0_COLS_14 + bool "14" + +endchoice + +choice + prompt "Number of rows address lines" + +config OR0_ROWS_9 + bool "9" + +config OR0_ROWS_10 + bool "10" + +config OR0_ROWS_11 + bool "11" + +config OR0_ROWS_12 + bool "12" + +config OR0_ROWS_13 + bool "13" + +config OR0_ROWS_14 + bool "14" + +config OR0_ROWS_15 + bool "15" + +endchoice + +choice + prompt "Page mode select" + +config OR0_PMSEL_BTB + bool "Back-to-back" + +config OR0_PMSEL_KEPT_OPEN + bool "Page kept open until page miss or refresh" + +endchoice + +endif # BR0_MACHINE_SDRAM + +choice + prompt "Relaxed timing" + +config OR0_TRLX_NORMAL + bool "Normal" + +config OR0_TRLX_RELAXED + bool "Relaxed" + +endchoice + +choice + prompt "Extended hold time" + +config OR0_EHTR_NORMAL + depends on OR0_TRLX_NORMAL + bool "Normal" + +config OR0_EHTR_1_CYCLE + depends on OR0_TRLX_NORMAL + bool "1 idle clock cycle inserted" + +config OR0_EHTR_4_CYCLE + depends on OR0_TRLX_RELAXED + bool "4 idle clock cycles inserted" + +config OR0_EHTR_8_CYCLE + depends on OR0_TRLX_RELAXED + bool "8 idle clock cycles inserted" + +endchoice + +if !ARCH_MPC8308 + +choice + prompt "External address latch delay" + +config OR0_EAD_NONE + bool "None" + +config OR0_EAD_EXTRA + bool "Extra" + +endchoice + +endif # !ARCH_MPC8308 + +endif # ELBC_BR0_OR0 + +config BR0_PORTSIZE + hex + default 0x800 if BR0_PORTSIZE_8BIT + default 0x1000 if BR0_PORTSIZE_16BIT + default 0x1800 if BR0_PORTSIZE_32BIT + +config BR0_ERRORCHECKING + hex + default 0x0 if !BR0_MACHINE_FCM + default 0x0 if BR0_ERRORCHECKING_DISABLED + default 0x200 if BR0_ERRORCHECKING_ECC_CHECKING + default 0x400 if BR0_ERRORCHECKING_BOTH + +config BR0_WRITE_PROTECT_BIT + hex + default 0x0 if !BR0_WRITE_PROTECT + default 0x100 if BR0_WRITE_PROTECT + +config BR0_MACHINE + hex + default 0x0 if BR0_MACHINE_GPCM + default 0x20 if BR0_MACHINE_FCM + default 0x60 if BR0_MACHINE_SDRAM + default 0x80 if BR0_MACHINE_UPMA + default 0xa0 if BR0_MACHINE_UPMB + default 0xc0 if BR0_MACHINE_UPMC + +config BR0_ATOMIC + hex + default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360 + default 0x0 if BR0_ATOMIC_NONE + default 0x4 if BR0_ATOMIC_RAWA + default 0x8 if BR0_ATOMIC_WARA + +config BR0_VALID_BIT + hex + default 0x0 if !ELBC_BR0_OR0 + default 0x1 if ELBC_BR0_OR0 + +config OR0_AM + hex + default 0xffff8000 if OR0_AM_32_KBYTES && !BR0_MACHINE_SDRAM + default 0xffff0000 if OR0_AM_64_KBYTES + default 0xfffe0000 if OR0_AM_128_KBYTES + default 0xfffc0000 if OR0_AM_256_KBYTES + default 0xfff80000 if OR0_AM_512_KBYTES + default 0xfff00000 if OR0_AM_1_MBYTES + default 0xffe00000 if OR0_AM_2_MBYTES + default 0xffc00000 if OR0_AM_4_MBYTES + default 0xff800000 if OR0_AM_8_MBYTES + default 0xff000000 if OR0_AM_16_MBYTES + default 0xfe000000 if OR0_AM_32_MBYTES + default 0xfc000000 if OR0_AM_64_MBYTES + default 0xf8000000 if OR0_AM_128_MBYTES + default 0xf0000000 if OR0_AM_256_MBYTES + default 0xe0000000 if OR0_AM_512_MBYTES + default 0xc0000000 if OR0_AM_1_GBYTES + default 0x80000000 if OR0_AM_2_GBYTES + default 0x00000000 if OR0_AM_4_GBYTES + +config OR0_XAM + hex + default 0x0 if !OR0_XAM_SET + default 0x6000 if OR0_XAM_SET + +config OR0_BCTLD + hex + default 0x0 if OR0_BCTLD_ASSERTED + default 0x1000 if OR0_BCTLD_NOT_ASSERTED + +config OR0_BI + hex + default 0x0 if !BR0_MACHINE_UPM + default 0x0 if OR0_BI_BURSTSUPPORT + default 0x100 if OR0_BI_BURSTINHIBIT + +config OR0_COLS + hex + default 0x0 if !BR0_MACHINE_SDRAM + default 0x0 if OR0_COLS_7 + default 0x400 if OR0_COLS_8 + default 0x800 if OR0_COLS_9 + default 0xc00 if OR0_COLS_10 + default 0x1000 if OR0_COLS_11 + default 0x1400 if OR0_COLS_12 + default 0x1800 if OR0_COLS_13 + default 0x1c00 if OR0_COLS_14 + +config OR0_ROWS + hex + default 0x0 if !BR0_MACHINE_SDRAM + default 0x0 if OR0_ROWS_9 + default 0x40 if OR0_ROWS_10 + default 0x80 if OR0_ROWS_11 + default 0xc0 if OR0_ROWS_12 + default 0x100 if OR0_ROWS_13 + default 0x140 if OR0_ROWS_14 + default 0x180 if OR0_ROWS_15 + +config OR0_PMSEL + hex + default 0x0 if !BR0_MACHINE_SDRAM + default 0x0 if OR0_PMSEL_BTB + default 0x20 if OR0_PMSEL_KEPT_OPEN + +config OR0_SCY + hex + default 0x0 if !BR0_MACHINE_GPCM && !BR0_MACHINE_FCM + default 0x0 if OR0_SCY_0 + default 0x10 if OR0_SCY_1 + default 0x20 if OR0_SCY_2 + default 0x30 if OR0_SCY_3 + default 0x40 if OR0_SCY_4 + default 0x50 if OR0_SCY_5 + default 0x60 if OR0_SCY_6 + default 0x70 if OR0_SCY_7 + default 0x80 if OR0_SCY_8 + default 0x90 if OR0_SCY_9 + default 0xa0 if OR0_SCY_10 + default 0xb0 if OR0_SCY_11 + default 0xc0 if OR0_SCY_12 + default 0xd0 if OR0_SCY_13 + default 0xe0 if OR0_SCY_14 + default 0xf0 if OR0_SCY_15 + +config OR0_PGS + hex + default 0x0 if !BR0_MACHINE_FCM + default 0x0 if OR0_PGS_SMALL + default 0x400 if OR0_PGS_LARGE + +config OR0_CSCT + hex + default 0x0 if !BR0_MACHINE_FCM + default 0x0 if OR0_CSCT_1_CYCLE + default 0x0 if OR0_CSCT_2_CYCLE + default 0x200 if OR0_CSCT_4_CYCLE + default 0x200 if OR0_CSCT_8_CYCLE + +config OR0_CST + hex + default 0x0 if !BR0_MACHINE_FCM + default 0x0 if OR0_CST_COINCIDENT + default 0x100 if OR0_CST_QUARTER_CLOCK + default 0x0 if OR0_CST_HALF_CLOCK + default 0x100 if OR0_CST_ONE_CLOCK + +config OR0_CHT + hex + default 0x0 if !BR0_MACHINE_FCM + default 0x0 if OR0_CHT_HALF_CLOCK + default 0x80 if OR0_CHT_ONE_CLOCK + default 0x0 if OR0_CHT_ONE_HALF_CLOCK + default 0x80 if OR0_CHT_TWO_CLOCK + +config OR0_RST + hex + default 0x0 if !BR0_MACHINE_FCM + default 0x0 if OR0_RST_THREE_QUARTER_CLOCK + default 0x8 if OR0_RST_ONE_CLOCK + default 0x0 if OR0_RST_ONE_HALF_CLOCK + +config OR0_CSNT + hex + default 0x0 if !BR0_MACHINE_GPCM + default 0x0 if OR0_CSNT_NORMAL + default 0x800 if OR0_CSNT_EARLIER + +config OR0_ACS + hex + default 0x0 if !BR0_MACHINE_GPCM + default 0x0 if OR0_ACS_SAME_TIME + default 0x400 if OR0_ACS_QUARTER_CYCLE_EARLIER + default 0x600 if OR0_ACS_HALF_CYCLE_EARLIER + +config OR0_XACS + hex + default 0x0 if !BR0_MACHINE_GPCM + default 0x0 if OR0_XACS_NORMAL + default 0x100 if OR0_XACS_EXTENDED + +config OR0_SETA + hex + default 0x0 if !BR0_MACHINE_GPCM + default 0x0 if OR0_SETA_INTERNAL + default 0x8 if OR0_SETA_EXTERNAL + +config OR0_TRLX + hex + default 0x0 if OR0_TRLX_NORMAL + default 0x4 if OR0_TRLX_RELAXED + +config OR0_EHTR + hex + default 0x0 if OR0_EHTR_NORMAL + default 0x2 if OR0_EHTR_1_CYCLE + default 0x0 if OR0_EHTR_4_CYCLE + default 0x2 if OR0_EHTR_8_CYCLE + +config OR0_EAD + hex + default 0x0 if ARCH_MPC8308 + default 0x0 if OR0_EAD_NONE + default 0x1 if OR0_EAD_EXTRA diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1 new file mode 100644 index 00000000000..08dcc7dd2ba --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1 @@ -0,0 +1,733 @@ +menuconfig ELBC_BR1_OR1 + bool "ELBC BR1/OR1" + +if ELBC_BR1_OR1 + +config BR1_OR1_NAME + string "Identifier" + +config BR1_OR1_BASE + hex "Port base" + +choice + prompt "Port size" + +config BR1_PORTSIZE_8BIT + bool "8-bit" + +config BR1_PORTSIZE_16BIT + depends on !BR1_MACHINE_FCM + bool "16-bit" + + +config BR1_PORTSIZE_32BIT + depends on !BR1_MACHINE_FCM + depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379 + bool "32-bit" + +endchoice + +if BR1_MACHINE_FCM + +choice + prompt "Data Error Checking" + +config BR1_ERRORCHECKING_DISABLED + bool "Disabled" + +config BR1_ERRORCHECKING_ECC_CHECKING + bool "ECC checking / No ECC generation" + +config BR1_ERRORCHECKING_BOTH + bool "ECC checking and generation" + +endchoice + +endif + +config BR1_WRITE_PROTECT + bool "Write-protect" + +config BR1_MACHINE_UPM + bool + +choice + prompt "Machine select" + +config BR1_MACHINE_GPCM + bool "GPCM" + +config BR1_MACHINE_FCM + depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360 + bool "FCM" + +config BR1_MACHINE_SDRAM + depends on ARCH_MPC8349 || ARCH_MPC8360 + bool "SDRAM" + +config BR1_MACHINE_UPMA + select BR1_MACHINE_UPM + bool "UPM (A)" + +config BR1_MACHINE_UPMB + select BR1_MACHINE_UPM + bool "UPM (B)" + +config BR1_MACHINE_UPMC + select BR1_MACHINE_UPM + bool "UPM (C)" + +endchoice + +if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360 + +choice + prompt "Atomic operations" + +config BR1_ATOMIC_NONE + bool "No atomic operations" + +config BR1_ATOMIC_RAWA + bool "Read-after-write-atomic" + +config BR1_ATOMIC_WARA + bool "Write-after-read-atomic" + +endchoice + +endif + +if BR1_MACHINE_GPCM || BR1_MACHINE_FCM || BR1_MACHINE_UPM || BR1_MACHINE_SDRAM + +choice + prompt "Address mask" + +config OR1_AM_32_KBYTES + depends on !BR1_MACHINE_SDRAM + bool "32 kb" + +config OR1_AM_64_KBYTES + bool "64 kb" + +config OR1_AM_128_KBYTES + bool "128 kb" + +config OR1_AM_256_KBYTES + bool "256 kb" + +config OR1_AM_512_KBYTES + bool "512 kb" + +config OR1_AM_1_MBYTES + bool "1 mb" + +config OR1_AM_2_MBYTES + bool "2 mb" + +config OR1_AM_4_MBYTES + bool "4 mb" + +config OR1_AM_8_MBYTES + bool "8 mb" + +config OR1_AM_16_MBYTES + bool "16 mb" + +config OR1_AM_32_MBYTES + bool "32 mb" + +config OR1_AM_64_MBYTES + bool "64 mb" + +# XXX: Some boards define 128MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR1_AM_128_MBYTES + bool "128 mb" + +# XXX: Some boards define 256MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR1_AM_256_MBYTES + bool "256 mb" + +config OR1_AM_512_MBYTES + depends on BR1_MACHINE_FCM + bool "512 mb" + +# XXX: Some boards define 1GB AM with GPCM, even though it should not be +# possible according to the manuals +config OR1_AM_1_GBYTES + bool "1 gb" + +config OR1_AM_2_GBYTES + depends on BR1_MACHINE_FCM + bool "2 gb" + +config OR1_AM_4_GBYTES + depends on BR1_MACHINE_FCM + bool "4 gb" + +endchoice + +config OR1_XAM_SET + bool "Set unused bytes after address mask" +choice + prompt "Buffer control disable" + +config OR1_BCTLD_ASSERTED + bool "Asserted" + +config OR1_BCTLD_NOT_ASSERTED + bool "Not asserted" + +endchoice + +endif + +if BR1_MACHINE_GPCM || BR1_MACHINE_FCM + +choice + prompt "Cycle length in bus clocks" + +config OR1_SCY_0 + bool "No wait states" + +config OR1_SCY_1 + bool "1 wait state" + +config OR1_SCY_2 + bool "2 wait states" + +config OR1_SCY_3 + bool "3 wait states" + +config OR1_SCY_4 + bool "4 wait states" + +config OR1_SCY_5 + bool "5 wait states" + +config OR1_SCY_6 + bool "6 wait states" + +config OR1_SCY_7 + bool "7 wait states" + +config OR1_SCY_8 + depends on BR1_MACHINE_GPCM + bool "8 wait states" + +config OR1_SCY_9 + depends on BR1_MACHINE_GPCM + bool "9 wait states" + +config OR1_SCY_10 + depends on BR1_MACHINE_GPCM + bool "10 wait states" + +config OR1_SCY_11 + depends on BR1_MACHINE_GPCM + bool "11 wait states" + +config OR1_SCY_12 + depends on BR1_MACHINE_GPCM + bool "12 wait states" + +config OR1_SCY_13 + depends on BR1_MACHINE_GPCM + bool "13 wait states" + +config OR1_SCY_14 + depends on BR1_MACHINE_GPCM + bool "14 wait states" + +config OR1_SCY_15 + depends on BR1_MACHINE_GPCM + bool "15 wait states" + +endchoice + +endif # BR1_MACHINE_GPCM || BR1_MACHINE_FCM + +if BR1_MACHINE_GPCM + +choice + prompt "Chip select negotiation time" + +config OR1_CSNT_NORMAL + bool "Normal" + +config OR1_CSNT_EARLIER + bool "Earlier" + +endchoice + +choice + prompt "Address to chip-select setup" + +config OR1_ACS_SAME_TIME + bool "At the same time" + +config OR1_ACS_HALF_CYCLE_EARLIER + bool "Half of a bus clock cycle earlier" + +config OR1_ACS_QUARTER_CYCLE_EARLIER + bool "Half/Quarter of a bus clock cycle earlier" + +endchoice + +choice + prompt "Extra address to check-select setup" + +config OR1_XACS_NORMAL + bool "Normal" + +config OR1_XACS_EXTENDED + bool "Extended" + +endchoice + +choice + prompt "External address termination" + +config OR1_SETA_INTERNAL + bool "Access is terminated internally" + +config OR1_SETA_EXTERNAL + bool "Access is terminated externally" + +endchoice + +endif # BR1_MACHINE_GPCM + +if BR1_MACHINE_FCM + +choice + prompt "NAND Flash EEPROM page size" + +config OR1_PGS_SMALL + bool "Small page device" + +config OR1_PGS_LARGE + bool "Large page device" + +endchoice + +choice + prompt "Chip select to command time" + +config OR1_CSCT_1_CYCLE + depends on OR1_TRLX_NORMAL + bool "1 cycle" + +config OR1_CSCT_2_CYCLE + depends on OR1_TRLX_RELAXED + bool "2 cycles" + +config OR1_CSCT_4_CYCLE + depends on OR1_TRLX_NORMAL + bool "4 cycles" + +config OR1_CSCT_8_CYCLE + depends on OR1_TRLX_RELAXED + bool "8 cycles" + +endchoice + +choice + prompt "Command setup time" + +config OR1_CST_COINCIDENT + depends on OR1_TRLX_NORMAL + bool "Coincident with any command" + +config OR1_CST_QUARTER_CLOCK + depends on OR1_TRLX_NORMAL + bool "0.25 clocks after" + +config OR1_CST_HALF_CLOCK + depends on OR1_TRLX_RELAXED + bool "0.5 clocks after" + +config OR1_CST_ONE_CLOCK + depends on OR1_TRLX_RELAXED + bool "1 clock after" + +endchoice + +choice + prompt "Command hold time" + +config OR1_CHT_HALF_CLOCK + depends on OR1_TRLX_NORMAL + bool "0.5 clocks before" + +config OR1_CHT_ONE_CLOCK + depends on OR1_TRLX_NORMAL + bool "1 clock before" + +config OR1_CHT_ONE_HALF_CLOCK + depends on OR1_TRLX_RELAXED + bool "1.5 clocks before" + +config OR1_CHT_TWO_CLOCK + depends on OR1_TRLX_RELAXED + bool "2 clocks before" + +endchoice + +choice + prompt "Reset setup time" + +config OR1_RST_THREE_QUARTER_CLOCK + depends on OR1_TRLX_NORMAL + bool "0.75 clocks prior" + +config OR1_RST_ONE_HALF_CLOCK + depends on OR1_TRLX_RELAXED + bool "0.5 clocks prior" + +config OR1_RST_ONE_CLOCK + bool "1 clock prior" + +endchoice + +endif # BR1_MACHINE_FCM + +if BR1_MACHINE_UPM + +choice + prompt "Burst inhibit" + +config OR1_BI_BURSTSUPPORT + bool "Support burst access" + +config OR1_BI_BURSTINHIBIT + bool "Inhibit burst access" + +endchoice + +endif # BR1_MACHINE_UPM + +if BR1_MACHINE_SDRAM + +choice + prompt "Number of column address lines" + +config OR1_COLS_7 + bool "7" + +config OR1_COLS_8 + bool "8" + +config OR1_COLS_9 + bool "9" + +config OR1_COLS_10 + bool "10" + +config OR1_COLS_11 + bool "11" + +config OR1_COLS_12 + bool "12" + +config OR1_COLS_13 + bool "13" + +config OR1_COLS_14 + bool "14" + +endchoice + +choice + prompt "Number of rows address lines" + +config OR1_ROWS_9 + bool "9" + +config OR1_ROWS_10 + bool "10" + +config OR1_ROWS_11 + bool "11" + +config OR1_ROWS_12 + bool "12" + +config OR1_ROWS_13 + bool "13" + +config OR1_ROWS_14 + bool "14" + +config OR1_ROWS_15 + bool "15" + +endchoice + +choice + prompt "Page mode select" + +config OR1_PMSEL_BTB + bool "Back-to-back" + +config OR1_PMSEL_KEPT_OPEN + bool "Page kept open until page miss or refresh" + +endchoice + +endif # BR1_MACHINE_SDRAM + +choice + prompt "Relaxed timing" + +config OR1_TRLX_NORMAL + bool "Normal" + +config OR1_TRLX_RELAXED + bool "Relaxed" + +endchoice + +choice + prompt "Extended hold time" + +config OR1_EHTR_NORMAL + depends on OR1_TRLX_NORMAL + bool "Normal" + +config OR1_EHTR_1_CYCLE + depends on OR1_TRLX_NORMAL + bool "1 idle clock cycle inserted" + +config OR1_EHTR_4_CYCLE + depends on OR1_TRLX_RELAXED + bool "4 idle clock cycles inserted" + +config OR1_EHTR_8_CYCLE + depends on OR1_TRLX_RELAXED + bool "8 idle clock cycles inserted" + +endchoice + +if !ARCH_MPC8308 + +choice + prompt "External address latch delay" + +config OR1_EAD_NONE + bool "None" + +config OR1_EAD_EXTRA + bool "Extra" + +endchoice + +endif # !ARCH_MPC8308 + +endif # ELBC_BR1_OR1 + +config BR1_PORTSIZE + hex + default 0x800 if BR1_PORTSIZE_8BIT + default 0x1000 if BR1_PORTSIZE_16BIT + default 0x1800 if BR1_PORTSIZE_32BIT + +config BR1_ERRORCHECKING + hex + default 0x0 if !BR1_MACHINE_FCM + default 0x0 if BR1_ERRORCHECKING_DISABLED + default 0x200 if BR1_ERRORCHECKING_ECC_CHECKING + default 0x400 if BR1_ERRORCHECKING_BOTH + +config BR1_WRITE_PROTECT_BIT + hex + default 0x0 if !BR1_WRITE_PROTECT + default 0x100 if BR1_WRITE_PROTECT + +config BR1_MACHINE + hex + default 0x0 if BR1_MACHINE_GPCM + default 0x20 if BR1_MACHINE_FCM + default 0x60 if BR1_MACHINE_SDRAM + default 0x80 if BR1_MACHINE_UPMA + default 0xa0 if BR1_MACHINE_UPMB + default 0xc0 if BR1_MACHINE_UPMC + +config BR1_ATOMIC + hex + default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360 + default 0x0 if BR1_ATOMIC_NONE + default 0x4 if BR1_ATOMIC_RAWA + default 0x8 if BR1_ATOMIC_WARA + +config BR1_VALID_BIT + hex + default 0x0 if !ELBC_BR1_OR1 + default 0x1 if ELBC_BR1_OR1 + +config OR1_AM + hex + default 0xffff8000 if OR1_AM_32_KBYTES && !BR1_MACHINE_SDRAM + default 0xffff0000 if OR1_AM_64_KBYTES + default 0xfffe0000 if OR1_AM_128_KBYTES + default 0xfffc0000 if OR1_AM_256_KBYTES + default 0xfff80000 if OR1_AM_512_KBYTES + default 0xfff00000 if OR1_AM_1_MBYTES + default 0xffe00000 if OR1_AM_2_MBYTES + default 0xffc00000 if OR1_AM_4_MBYTES + default 0xff800000 if OR1_AM_8_MBYTES + default 0xff000000 if OR1_AM_16_MBYTES + default 0xfe000000 if OR1_AM_32_MBYTES + default 0xfc000000 if OR1_AM_64_MBYTES + default 0xf8000000 if OR1_AM_128_MBYTES + default 0xf0000000 if OR1_AM_256_MBYTES + default 0xe0000000 if OR1_AM_512_MBYTES + default 0xc0000000 if OR1_AM_1_GBYTES + default 0x80000000 if OR1_AM_2_GBYTES + default 0x00000000 if OR1_AM_4_GBYTES + +config OR1_XAM + hex + default 0x0 if !OR1_XAM_SET + default 0x6000 if OR1_XAM_SET + +config OR1_BCTLD + hex + default 0x0 if OR1_BCTLD_ASSERTED + default 0x1000 if OR1_BCTLD_NOT_ASSERTED + +config OR1_BI + hex + default 0x0 if !BR1_MACHINE_UPM + default 0x0 if OR1_BI_BURSTSUPPORT + default 0x100 if OR1_BI_BURSTINHIBIT + +config OR1_COLS + hex + default 0x0 if !BR1_MACHINE_SDRAM + default 0x0 if OR1_COLS_7 + default 0x400 if OR1_COLS_8 + default 0x800 if OR1_COLS_9 + default 0xc00 if OR1_COLS_10 + default 0x1000 if OR1_COLS_11 + default 0x1400 if OR1_COLS_12 + default 0x1800 if OR1_COLS_13 + default 0x1c00 if OR1_COLS_14 + +config OR1_ROWS + hex + default 0x0 if !BR1_MACHINE_SDRAM + default 0x0 if OR1_ROWS_9 + default 0x40 if OR1_ROWS_10 + default 0x80 if OR1_ROWS_11 + default 0xc0 if OR1_ROWS_12 + default 0x100 if OR1_ROWS_13 + default 0x140 if OR1_ROWS_14 + default 0x180 if OR1_ROWS_15 + +config OR1_PMSEL + hex + default 0x0 if !BR1_MACHINE_SDRAM + default 0x0 if OR1_PMSEL_BTB + default 0x20 if OR1_PMSEL_KEPT_OPEN + +config OR1_SCY + hex + default 0x0 if !BR1_MACHINE_GPCM && !BR1_MACHINE_FCM + default 0x0 if OR1_SCY_0 + default 0x10 if OR1_SCY_1 + default 0x20 if OR1_SCY_2 + default 0x30 if OR1_SCY_3 + default 0x40 if OR1_SCY_4 + default 0x50 if OR1_SCY_5 + default 0x60 if OR1_SCY_6 + default 0x70 if OR1_SCY_7 + default 0x80 if OR1_SCY_8 + default 0x90 if OR1_SCY_9 + default 0xa0 if OR1_SCY_10 + default 0xb0 if OR1_SCY_11 + default 0xc0 if OR1_SCY_12 + default 0xd0 if OR1_SCY_13 + default 0xe0 if OR1_SCY_14 + default 0xf0 if OR1_SCY_15 + +config OR1_PGS + hex + default 0x0 if !BR1_MACHINE_FCM + default 0x0 if OR1_PGS_SMALL + default 0x400 if OR1_PGS_LARGE + +config OR1_CSCT + hex + default 0x0 if !BR1_MACHINE_FCM + default 0x0 if OR1_CSCT_1_CYCLE + default 0x0 if OR1_CSCT_2_CYCLE + default 0x200 if OR1_CSCT_4_CYCLE + default 0x200 if OR1_CSCT_8_CYCLE + +config OR1_CST + hex + default 0x0 if !BR1_MACHINE_FCM + default 0x0 if OR1_CST_COINCIDENT + default 0x100 if OR1_CST_QUARTER_CLOCK + default 0x0 if OR1_CST_HALF_CLOCK + default 0x100 if OR1_CST_ONE_CLOCK + +config OR1_CHT + hex + default 0x0 if !BR1_MACHINE_FCM + default 0x0 if OR1_CHT_HALF_CLOCK + default 0x80 if OR1_CHT_ONE_CLOCK + default 0x0 if OR1_CHT_ONE_HALF_CLOCK + default 0x80 if OR1_CHT_TWO_CLOCK + +config OR1_RST + hex + default 0x0 if !BR1_MACHINE_FCM + default 0x0 if OR1_RST_THREE_QUARTER_CLOCK + default 0x8 if OR1_RST_ONE_CLOCK + default 0x0 if OR1_RST_ONE_HALF_CLOCK + +config OR1_CSNT + hex + default 0x0 if !BR1_MACHINE_GPCM + default 0x0 if OR1_CSNT_NORMAL + default 0x800 if OR1_CSNT_EARLIER + +config OR1_ACS + hex + default 0x0 if !BR1_MACHINE_GPCM + default 0x0 if OR1_ACS_SAME_TIME + default 0x400 if OR1_ACS_QUARTER_CYCLE_EARLIER + default 0x600 if OR1_ACS_HALF_CYCLE_EARLIER + +config OR1_XACS + hex + default 0x0 if !BR1_MACHINE_GPCM + default 0x0 if OR1_XACS_NORMAL + default 0x100 if OR1_XACS_EXTENDED + +config OR1_SETA + hex + default 0x0 if !BR1_MACHINE_GPCM + default 0x0 if OR1_SETA_INTERNAL + default 0x8 if OR1_SETA_EXTERNAL + +config OR1_TRLX + hex + default 0x0 if OR1_TRLX_NORMAL + default 0x4 if OR1_TRLX_RELAXED + +config OR1_EHTR + hex + default 0x0 if OR1_EHTR_NORMAL + default 0x2 if OR1_EHTR_1_CYCLE + default 0x0 if OR1_EHTR_4_CYCLE + default 0x2 if OR1_EHTR_8_CYCLE + +config OR1_EAD + hex + default 0x0 if ARCH_MPC8308 + default 0x0 if OR1_EAD_NONE + default 0x1 if OR1_EAD_EXTRA diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2 new file mode 100644 index 00000000000..298d87f5e0f --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2 @@ -0,0 +1,733 @@ +menuconfig ELBC_BR2_OR2 + bool "ELBC BR2/OR2" + +if ELBC_BR2_OR2 + +config BR2_OR2_NAME + string "Identifier" + +config BR2_OR2_BASE + hex "Port base" + +choice + prompt "Port size" + +config BR2_PORTSIZE_8BIT + bool "8-bit" + +config BR2_PORTSIZE_16BIT + depends on !BR2_MACHINE_FCM + bool "16-bit" + + +config BR2_PORTSIZE_32BIT + depends on !BR2_MACHINE_FCM + depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379 + bool "32-bit" + +endchoice + +if BR2_MACHINE_FCM + +choice + prompt "Data Error Checking" + +config BR2_ERRORCHECKING_DISABLED + bool "Disabled" + +config BR2_ERRORCHECKING_ECC_CHECKING + bool "ECC checking / No ECC generation" + +config BR2_ERRORCHECKING_BOTH + bool "ECC checking and generation" + +endchoice + +endif + +config BR2_WRITE_PROTECT + bool "Write-protect" + +config BR2_MACHINE_UPM + bool + +choice + prompt "Machine select" + +config BR2_MACHINE_GPCM + bool "GPCM" + +config BR2_MACHINE_FCM + depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360 + bool "FCM" + +config BR2_MACHINE_SDRAM + depends on ARCH_MPC8349 || ARCH_MPC8360 + bool "SDRAM" + +config BR2_MACHINE_UPMA + select BR2_MACHINE_UPM + bool "UPM (A)" + +config BR2_MACHINE_UPMB + select BR2_MACHINE_UPM + bool "UPM (B)" + +config BR2_MACHINE_UPMC + select BR2_MACHINE_UPM + bool "UPM (C)" + +endchoice + +if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360 + +choice + prompt "Atomic operations" + +config BR2_ATOMIC_NONE + bool "No atomic operations" + +config BR2_ATOMIC_RAWA + bool "Read-after-write-atomic" + +config BR2_ATOMIC_WARA + bool "Write-after-read-atomic" + +endchoice + +endif + +if BR2_MACHINE_GPCM || BR2_MACHINE_FCM || BR2_MACHINE_UPM || BR2_MACHINE_SDRAM + +choice + prompt "Address mask" + +config OR2_AM_32_KBYTES + depends on !BR2_MACHINE_SDRAM + bool "32 kb" + +config OR2_AM_64_KBYTES + bool "64 kb" + +config OR2_AM_128_KBYTES + bool "128 kb" + +config OR2_AM_256_KBYTES + bool "256 kb" + +config OR2_AM_512_KBYTES + bool "512 kb" + +config OR2_AM_1_MBYTES + bool "1 mb" + +config OR2_AM_2_MBYTES + bool "2 mb" + +config OR2_AM_4_MBYTES + bool "4 mb" + +config OR2_AM_8_MBYTES + bool "8 mb" + +config OR2_AM_16_MBYTES + bool "16 mb" + +config OR2_AM_32_MBYTES + bool "32 mb" + +config OR2_AM_64_MBYTES + bool "64 mb" + +# XXX: Some boards define 128MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR2_AM_128_MBYTES + bool "128 mb" + +# XXX: Some boards define 256MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR2_AM_256_MBYTES + bool "256 mb" + +config OR2_AM_512_MBYTES + depends on BR2_MACHINE_FCM + bool "512 mb" + +# XXX: Some boards define 1GB AM with GPCM, even though it should not be +# possible according to the manuals +config OR2_AM_1_GBYTES + bool "1 gb" + +config OR2_AM_2_GBYTES + depends on BR2_MACHINE_FCM + bool "2 gb" + +config OR2_AM_4_GBYTES + depends on BR2_MACHINE_FCM + bool "4 gb" + +endchoice + +config OR2_XAM_SET + bool "Set unused bytes after address mask" +choice + prompt "Buffer control disable" + +config OR2_BCTLD_ASSERTED + bool "Asserted" + +config OR2_BCTLD_NOT_ASSERTED + bool "Not asserted" + +endchoice + +endif + +if BR2_MACHINE_GPCM || BR2_MACHINE_FCM + +choice + prompt "Cycle length in bus clocks" + +config OR2_SCY_0 + bool "No wait states" + +config OR2_SCY_1 + bool "1 wait state" + +config OR2_SCY_2 + bool "2 wait states" + +config OR2_SCY_3 + bool "3 wait states" + +config OR2_SCY_4 + bool "4 wait states" + +config OR2_SCY_5 + bool "5 wait states" + +config OR2_SCY_6 + bool "6 wait states" + +config OR2_SCY_7 + bool "7 wait states" + +config OR2_SCY_8 + depends on BR2_MACHINE_GPCM + bool "8 wait states" + +config OR2_SCY_9 + depends on BR2_MACHINE_GPCM + bool "9 wait states" + +config OR2_SCY_10 + depends on BR2_MACHINE_GPCM + bool "10 wait states" + +config OR2_SCY_11 + depends on BR2_MACHINE_GPCM + bool "11 wait states" + +config OR2_SCY_12 + depends on BR2_MACHINE_GPCM + bool "12 wait states" + +config OR2_SCY_13 + depends on BR2_MACHINE_GPCM + bool "13 wait states" + +config OR2_SCY_14 + depends on BR2_MACHINE_GPCM + bool "14 wait states" + +config OR2_SCY_15 + depends on BR2_MACHINE_GPCM + bool "15 wait states" + +endchoice + +endif # BR2_MACHINE_GPCM || BR2_MACHINE_FCM + +if BR2_MACHINE_GPCM + +choice + prompt "Chip select negotiation time" + +config OR2_CSNT_NORMAL + bool "Normal" + +config OR2_CSNT_EARLIER + bool "Earlier" + +endchoice + +choice + prompt "Address to chip-select setup" + +config OR2_ACS_SAME_TIME + bool "At the same time" + +config OR2_ACS_HALF_CYCLE_EARLIER + bool "Half of a bus clock cycle earlier" + +config OR2_ACS_QUARTER_CYCLE_EARLIER + bool "Half/Quarter of a bus clock cycle earlier" + +endchoice + +choice + prompt "Extra address to check-select setup" + +config OR2_XACS_NORMAL + bool "Normal" + +config OR2_XACS_EXTENDED + bool "Extended" + +endchoice + +choice + prompt "External address termination" + +config OR2_SETA_INTERNAL + bool "Access is terminated internally" + +config OR2_SETA_EXTERNAL + bool "Access is terminated externally" + +endchoice + +endif # BR2_MACHINE_GPCM + +if BR2_MACHINE_FCM + +choice + prompt "NAND Flash EEPROM page size" + +config OR2_PGS_SMALL + bool "Small page device" + +config OR2_PGS_LARGE + bool "Large page device" + +endchoice + +choice + prompt "Chip select to command time" + +config OR2_CSCT_1_CYCLE + depends on OR2_TRLX_NORMAL + bool "1 cycle" + +config OR2_CSCT_2_CYCLE + depends on OR2_TRLX_RELAXED + bool "2 cycles" + +config OR2_CSCT_4_CYCLE + depends on OR2_TRLX_NORMAL + bool "4 cycles" + +config OR2_CSCT_8_CYCLE + depends on OR2_TRLX_RELAXED + bool "8 cycles" + +endchoice + +choice + prompt "Command setup time" + +config OR2_CST_COINCIDENT + depends on OR2_TRLX_NORMAL + bool "Coincident with any command" + +config OR2_CST_QUARTER_CLOCK + depends on OR2_TRLX_NORMAL + bool "0.25 clocks after" + +config OR2_CST_HALF_CLOCK + depends on OR2_TRLX_RELAXED + bool "0.5 clocks after" + +config OR2_CST_ONE_CLOCK + depends on OR2_TRLX_RELAXED + bool "1 clock after" + +endchoice + +choice + prompt "Command hold time" + +config OR2_CHT_HALF_CLOCK + depends on OR2_TRLX_NORMAL + bool "0.5 clocks before" + +config OR2_CHT_ONE_CLOCK + depends on OR2_TRLX_NORMAL + bool "1 clock before" + +config OR2_CHT_ONE_HALF_CLOCK + depends on OR2_TRLX_RELAXED + bool "1.5 clocks before" + +config OR2_CHT_TWO_CLOCK + depends on OR2_TRLX_RELAXED + bool "2 clocks before" + +endchoice + +choice + prompt "Reset setup time" + +config OR2_RST_THREE_QUARTER_CLOCK + depends on OR2_TRLX_NORMAL + bool "0.75 clocks prior" + +config OR2_RST_ONE_HALF_CLOCK + depends on OR2_TRLX_RELAXED + bool "0.5 clocks prior" + +config OR2_RST_ONE_CLOCK + bool "1 clock prior" + +endchoice + +endif # BR2_MACHINE_FCM + +if BR2_MACHINE_UPM + +choice + prompt "Burst inhibit" + +config OR2_BI_BURSTSUPPORT + bool "Support burst access" + +config OR2_BI_BURSTINHIBIT + bool "Inhibit burst access" + +endchoice + +endif # BR2_MACHINE_UPM + +if BR2_MACHINE_SDRAM + +choice + prompt "Number of column address lines" + +config OR2_COLS_7 + bool "7" + +config OR2_COLS_8 + bool "8" + +config OR2_COLS_9 + bool "9" + +config OR2_COLS_10 + bool "10" + +config OR2_COLS_11 + bool "11" + +config OR2_COLS_12 + bool "12" + +config OR2_COLS_13 + bool "13" + +config OR2_COLS_14 + bool "14" + +endchoice + +choice + prompt "Number of rows address lines" + +config OR2_ROWS_9 + bool "9" + +config OR2_ROWS_10 + bool "10" + +config OR2_ROWS_11 + bool "11" + +config OR2_ROWS_12 + bool "12" + +config OR2_ROWS_13 + bool "13" + +config OR2_ROWS_14 + bool "14" + +config OR2_ROWS_15 + bool "15" + +endchoice + +choice + prompt "Page mode select" + +config OR2_PMSEL_BTB + bool "Back-to-back" + +config OR2_PMSEL_KEPT_OPEN + bool "Page kept open until page miss or refresh" + +endchoice + +endif # BR2_MACHINE_SDRAM + +choice + prompt "Relaxed timing" + +config OR2_TRLX_NORMAL + bool "Normal" + +config OR2_TRLX_RELAXED + bool "Relaxed" + +endchoice + +choice + prompt "Extended hold time" + +config OR2_EHTR_NORMAL + depends on OR2_TRLX_NORMAL + bool "Normal" + +config OR2_EHTR_1_CYCLE + depends on OR2_TRLX_NORMAL + bool "1 idle clock cycle inserted" + +config OR2_EHTR_4_CYCLE + depends on OR2_TRLX_RELAXED + bool "4 idle clock cycles inserted" + +config OR2_EHTR_8_CYCLE + depends on OR2_TRLX_RELAXED + bool "8 idle clock cycles inserted" + +endchoice + +if !ARCH_MPC8308 + +choice + prompt "External address latch delay" + +config OR2_EAD_NONE + bool "None" + +config OR2_EAD_EXTRA + bool "Extra" + +endchoice + +endif # !ARCH_MPC8308 + +endif # ELBC_BR2_OR2 + +config BR2_PORTSIZE + hex + default 0x800 if BR2_PORTSIZE_8BIT + default 0x1000 if BR2_PORTSIZE_16BIT + default 0x1800 if BR2_PORTSIZE_32BIT + +config BR2_ERRORCHECKING + hex + default 0x0 if !BR2_MACHINE_FCM + default 0x0 if BR2_ERRORCHECKING_DISABLED + default 0x200 if BR2_ERRORCHECKING_ECC_CHECKING + default 0x400 if BR2_ERRORCHECKING_BOTH + +config BR2_WRITE_PROTECT_BIT + hex + default 0x0 if !BR2_WRITE_PROTECT + default 0x100 if BR2_WRITE_PROTECT + +config BR2_MACHINE + hex + default 0x0 if BR2_MACHINE_GPCM + default 0x20 if BR2_MACHINE_FCM + default 0x60 if BR2_MACHINE_SDRAM + default 0x80 if BR2_MACHINE_UPMA + default 0xa0 if BR2_MACHINE_UPMB + default 0xc0 if BR2_MACHINE_UPMC + +config BR2_ATOMIC + hex + default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360 + default 0x0 if BR2_ATOMIC_NONE + default 0x4 if BR2_ATOMIC_RAWA + default 0x8 if BR2_ATOMIC_WARA + +config BR2_VALID_BIT + hex + default 0x0 if !ELBC_BR2_OR2 + default 0x1 if ELBC_BR2_OR2 + +config OR2_AM + hex + default 0xffff8000 if OR2_AM_32_KBYTES && !BR2_MACHINE_SDRAM + default 0xffff0000 if OR2_AM_64_KBYTES + default 0xfffe0000 if OR2_AM_128_KBYTES + default 0xfffc0000 if OR2_AM_256_KBYTES + default 0xfff80000 if OR2_AM_512_KBYTES + default 0xfff00000 if OR2_AM_1_MBYTES + default 0xffe00000 if OR2_AM_2_MBYTES + default 0xffc00000 if OR2_AM_4_MBYTES + default 0xff800000 if OR2_AM_8_MBYTES + default 0xff000000 if OR2_AM_16_MBYTES + default 0xfe000000 if OR2_AM_32_MBYTES + default 0xfc000000 if OR2_AM_64_MBYTES + default 0xf8000000 if OR2_AM_128_MBYTES + default 0xf0000000 if OR2_AM_256_MBYTES + default 0xe0000000 if OR2_AM_512_MBYTES + default 0xc0000000 if OR2_AM_1_GBYTES + default 0x80000000 if OR2_AM_2_GBYTES + default 0x00000000 if OR2_AM_4_GBYTES + +config OR2_XAM + hex + default 0x0 if !OR2_XAM_SET + default 0x6000 if OR2_XAM_SET + +config OR2_BCTLD + hex + default 0x0 if OR2_BCTLD_ASSERTED + default 0x1000 if OR2_BCTLD_NOT_ASSERTED + +config OR2_BI + hex + default 0x0 if !BR2_MACHINE_UPM + default 0x0 if OR2_BI_BURSTSUPPORT + default 0x100 if OR2_BI_BURSTINHIBIT + +config OR2_COLS + hex + default 0x0 if !BR2_MACHINE_SDRAM + default 0x0 if OR2_COLS_7 + default 0x400 if OR2_COLS_8 + default 0x800 if OR2_COLS_9 + default 0xc00 if OR2_COLS_10 + default 0x1000 if OR2_COLS_11 + default 0x1400 if OR2_COLS_12 + default 0x1800 if OR2_COLS_13 + default 0x1c00 if OR2_COLS_14 + +config OR2_ROWS + hex + default 0x0 if !BR2_MACHINE_SDRAM + default 0x0 if OR2_ROWS_9 + default 0x40 if OR2_ROWS_10 + default 0x80 if OR2_ROWS_11 + default 0xc0 if OR2_ROWS_12 + default 0x100 if OR2_ROWS_13 + default 0x140 if OR2_ROWS_14 + default 0x180 if OR2_ROWS_15 + +config OR2_PMSEL + hex + default 0x0 if !BR2_MACHINE_SDRAM + default 0x0 if OR2_PMSEL_BTB + default 0x20 if OR2_PMSEL_KEPT_OPEN + +config OR2_SCY + hex + default 0x0 if !BR2_MACHINE_GPCM && !BR2_MACHINE_FCM + default 0x0 if OR2_SCY_0 + default 0x10 if OR2_SCY_1 + default 0x20 if OR2_SCY_2 + default 0x30 if OR2_SCY_3 + default 0x40 if OR2_SCY_4 + default 0x50 if OR2_SCY_5 + default 0x60 if OR2_SCY_6 + default 0x70 if OR2_SCY_7 + default 0x80 if OR2_SCY_8 + default 0x90 if OR2_SCY_9 + default 0xa0 if OR2_SCY_10 + default 0xb0 if OR2_SCY_11 + default 0xc0 if OR2_SCY_12 + default 0xd0 if OR2_SCY_13 + default 0xe0 if OR2_SCY_14 + default 0xf0 if OR2_SCY_15 + +config OR2_PGS + hex + default 0x0 if !BR2_MACHINE_FCM + default 0x0 if OR2_PGS_SMALL + default 0x400 if OR2_PGS_LARGE + +config OR2_CSCT + hex + default 0x0 if !BR2_MACHINE_FCM + default 0x0 if OR2_CSCT_1_CYCLE + default 0x0 if OR2_CSCT_2_CYCLE + default 0x200 if OR2_CSCT_4_CYCLE + default 0x200 if OR2_CSCT_8_CYCLE + +config OR2_CST + hex + default 0x0 if !BR2_MACHINE_FCM + default 0x0 if OR2_CST_COINCIDENT + default 0x100 if OR2_CST_QUARTER_CLOCK + default 0x0 if OR2_CST_HALF_CLOCK + default 0x100 if OR2_CST_ONE_CLOCK + +config OR2_CHT + hex + default 0x0 if !BR2_MACHINE_FCM + default 0x0 if OR2_CHT_HALF_CLOCK + default 0x80 if OR2_CHT_ONE_CLOCK + default 0x0 if OR2_CHT_ONE_HALF_CLOCK + default 0x80 if OR2_CHT_TWO_CLOCK + +config OR2_RST + hex + default 0x0 if !BR2_MACHINE_FCM + default 0x0 if OR2_RST_THREE_QUARTER_CLOCK + default 0x8 if OR2_RST_ONE_CLOCK + default 0x0 if OR2_RST_ONE_HALF_CLOCK + +config OR2_CSNT + hex + default 0x0 if !BR2_MACHINE_GPCM + default 0x0 if OR2_CSNT_NORMAL + default 0x800 if OR2_CSNT_EARLIER + +config OR2_ACS + hex + default 0x0 if !BR2_MACHINE_GPCM + default 0x0 if OR2_ACS_SAME_TIME + default 0x400 if OR2_ACS_QUARTER_CYCLE_EARLIER + default 0x600 if OR2_ACS_HALF_CYCLE_EARLIER + +config OR2_XACS + hex + default 0x0 if !BR2_MACHINE_GPCM + default 0x0 if OR2_XACS_NORMAL + default 0x100 if OR2_XACS_EXTENDED + +config OR2_SETA + hex + default 0x0 if !BR2_MACHINE_GPCM + default 0x0 if OR2_SETA_INTERNAL + default 0x8 if OR2_SETA_EXTERNAL + +config OR2_TRLX + hex + default 0x0 if OR2_TRLX_NORMAL + default 0x4 if OR2_TRLX_RELAXED + +config OR2_EHTR + hex + default 0x0 if OR2_EHTR_NORMAL + default 0x2 if OR2_EHTR_1_CYCLE + default 0x0 if OR2_EHTR_4_CYCLE + default 0x2 if OR2_EHTR_8_CYCLE + +config OR2_EAD + hex + default 0x0 if ARCH_MPC8308 + default 0x0 if OR2_EAD_NONE + default 0x1 if OR2_EAD_EXTRA diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3 new file mode 100644 index 00000000000..963831bfcbd --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3 @@ -0,0 +1,733 @@ +menuconfig ELBC_BR3_OR3 + bool "ELBC BR3/OR3" + +if ELBC_BR3_OR3 + +config BR3_OR3_NAME + string "Identifier" + +config BR3_OR3_BASE + hex "Port base" + +choice + prompt "Port size" + +config BR3_PORTSIZE_8BIT + bool "8-bit" + +config BR3_PORTSIZE_16BIT + depends on !BR3_MACHINE_FCM + bool "16-bit" + + +config BR3_PORTSIZE_32BIT + depends on !BR3_MACHINE_FCM + depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379 + bool "32-bit" + +endchoice + +if BR3_MACHINE_FCM + +choice + prompt "Data Error Checking" + +config BR3_ERRORCHECKING_DISABLED + bool "Disabled" + +config BR3_ERRORCHECKING_ECC_CHECKING + bool "ECC checking / No ECC generation" + +config BR3_ERRORCHECKING_BOTH + bool "ECC checking and generation" + +endchoice + +endif + +config BR3_WRITE_PROTECT + bool "Write-protect" + +config BR3_MACHINE_UPM + bool + +choice + prompt "Machine select" + +config BR3_MACHINE_GPCM + bool "GPCM" + +config BR3_MACHINE_FCM + depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360 + bool "FCM" + +config BR3_MACHINE_SDRAM + depends on ARCH_MPC8349 || ARCH_MPC8360 + bool "SDRAM" + +config BR3_MACHINE_UPMA + select BR3_MACHINE_UPM + bool "UPM (A)" + +config BR3_MACHINE_UPMB + select BR3_MACHINE_UPM + bool "UPM (B)" + +config BR3_MACHINE_UPMC + select BR3_MACHINE_UPM + bool "UPM (C)" + +endchoice + +if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360 + +choice + prompt "Atomic operations" + +config BR3_ATOMIC_NONE + bool "No atomic operations" + +config BR3_ATOMIC_RAWA + bool "Read-after-write-atomic" + +config BR3_ATOMIC_WARA + bool "Write-after-read-atomic" + +endchoice + +endif + +if BR3_MACHINE_GPCM || BR3_MACHINE_FCM || BR3_MACHINE_UPM || BR3_MACHINE_SDRAM + +choice + prompt "Address mask" + +config OR3_AM_32_KBYTES + depends on !BR3_MACHINE_SDRAM + bool "32 kb" + +config OR3_AM_64_KBYTES + bool "64 kb" + +config OR3_AM_128_KBYTES + bool "128 kb" + +config OR3_AM_256_KBYTES + bool "256 kb" + +config OR3_AM_512_KBYTES + bool "512 kb" + +config OR3_AM_1_MBYTES + bool "1 mb" + +config OR3_AM_2_MBYTES + bool "2 mb" + +config OR3_AM_4_MBYTES + bool "4 mb" + +config OR3_AM_8_MBYTES + bool "8 mb" + +config OR3_AM_16_MBYTES + bool "16 mb" + +config OR3_AM_32_MBYTES + bool "32 mb" + +config OR3_AM_64_MBYTES + bool "64 mb" + +# XXX: Some boards define 128MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR3_AM_128_MBYTES + bool "128 mb" + +# XXX: Some boards define 256MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR3_AM_256_MBYTES + bool "256 mb" + +config OR3_AM_512_MBYTES + depends on BR3_MACHINE_FCM + bool "512 mb" + +# XXX: Some boards define 1GB AM with GPCM, even though it should not be +# possible according to the manuals +config OR3_AM_1_GBYTES + bool "1 gb" + +config OR3_AM_2_GBYTES + depends on BR3_MACHINE_FCM + bool "2 gb" + +config OR3_AM_4_GBYTES + depends on BR3_MACHINE_FCM + bool "4 gb" + +endchoice + +config OR3_XAM_SET + bool "Set unused bytes after address mask" +choice + prompt "Buffer control disable" + +config OR3_BCTLD_ASSERTED + bool "Asserted" + +config OR3_BCTLD_NOT_ASSERTED + bool "Not asserted" + +endchoice + +endif + +if BR3_MACHINE_GPCM || BR3_MACHINE_FCM + +choice + prompt "Cycle length in bus clocks" + +config OR3_SCY_0 + bool "No wait states" + +config OR3_SCY_1 + bool "1 wait state" + +config OR3_SCY_2 + bool "2 wait states" + +config OR3_SCY_3 + bool "3 wait states" + +config OR3_SCY_4 + bool "4 wait states" + +config OR3_SCY_5 + bool "5 wait states" + +config OR3_SCY_6 + bool "6 wait states" + +config OR3_SCY_7 + bool "7 wait states" + +config OR3_SCY_8 + depends on BR3_MACHINE_GPCM + bool "8 wait states" + +config OR3_SCY_9 + depends on BR3_MACHINE_GPCM + bool "9 wait states" + +config OR3_SCY_10 + depends on BR3_MACHINE_GPCM + bool "10 wait states" + +config OR3_SCY_11 + depends on BR3_MACHINE_GPCM + bool "11 wait states" + +config OR3_SCY_12 + depends on BR3_MACHINE_GPCM + bool "12 wait states" + +config OR3_SCY_13 + depends on BR3_MACHINE_GPCM + bool "13 wait states" + +config OR3_SCY_14 + depends on BR3_MACHINE_GPCM + bool "14 wait states" + +config OR3_SCY_15 + depends on BR3_MACHINE_GPCM + bool "15 wait states" + +endchoice + +endif # BR3_MACHINE_GPCM || BR3_MACHINE_FCM + +if BR3_MACHINE_GPCM + +choice + prompt "Chip select negotiation time" + +config OR3_CSNT_NORMAL + bool "Normal" + +config OR3_CSNT_EARLIER + bool "Earlier" + +endchoice + +choice + prompt "Address to chip-select setup" + +config OR3_ACS_SAME_TIME + bool "At the same time" + +config OR3_ACS_HALF_CYCLE_EARLIER + bool "Half of a bus clock cycle earlier" + +config OR3_ACS_QUARTER_CYCLE_EARLIER + bool "Half/Quarter of a bus clock cycle earlier" + +endchoice + +choice + prompt "Extra address to check-select setup" + +config OR3_XACS_NORMAL + bool "Normal" + +config OR3_XACS_EXTENDED + bool "Extended" + +endchoice + +choice + prompt "External address termination" + +config OR3_SETA_INTERNAL + bool "Access is terminated internally" + +config OR3_SETA_EXTERNAL + bool "Access is terminated externally" + +endchoice + +endif # BR3_MACHINE_GPCM + +if BR3_MACHINE_FCM + +choice + prompt "NAND Flash EEPROM page size" + +config OR3_PGS_SMALL + bool "Small page device" + +config OR3_PGS_LARGE + bool "Large page device" + +endchoice + +choice + prompt "Chip select to command time" + +config OR3_CSCT_1_CYCLE + depends on OR3_TRLX_NORMAL + bool "1 cycle" + +config OR3_CSCT_2_CYCLE + depends on OR3_TRLX_RELAXED + bool "2 cycles" + +config OR3_CSCT_4_CYCLE + depends on OR3_TRLX_NORMAL + bool "4 cycles" + +config OR3_CSCT_8_CYCLE + depends on OR3_TRLX_RELAXED + bool "8 cycles" + +endchoice + +choice + prompt "Command setup time" + +config OR3_CST_COINCIDENT + depends on OR3_TRLX_NORMAL + bool "Coincident with any command" + +config OR3_CST_QUARTER_CLOCK + depends on OR3_TRLX_NORMAL + bool "0.25 clocks after" + +config OR3_CST_HALF_CLOCK + depends on OR3_TRLX_RELAXED + bool "0.5 clocks after" + +config OR3_CST_ONE_CLOCK + depends on OR3_TRLX_RELAXED + bool "1 clock after" + +endchoice + +choice + prompt "Command hold time" + +config OR3_CHT_HALF_CLOCK + depends on OR3_TRLX_NORMAL + bool "0.5 clocks before" + +config OR3_CHT_ONE_CLOCK + depends on OR3_TRLX_NORMAL + bool "1 clock before" + +config OR3_CHT_ONE_HALF_CLOCK + depends on OR3_TRLX_RELAXED + bool "1.5 clocks before" + +config OR3_CHT_TWO_CLOCK + depends on OR3_TRLX_RELAXED + bool "2 clocks before" + +endchoice + +choice + prompt "Reset setup time" + +config OR3_RST_THREE_QUARTER_CLOCK + depends on OR3_TRLX_NORMAL + bool "0.75 clocks prior" + +config OR3_RST_ONE_HALF_CLOCK + depends on OR3_TRLX_RELAXED + bool "0.5 clocks prior" + +config OR3_RST_ONE_CLOCK + bool "1 clock prior" + +endchoice + +endif # BR3_MACHINE_FCM + +if BR3_MACHINE_UPM + +choice + prompt "Burst inhibit" + +config OR3_BI_BURSTSUPPORT + bool "Support burst access" + +config OR3_BI_BURSTINHIBIT + bool "Inhibit burst access" + +endchoice + +endif # BR3_MACHINE_UPM + +if BR3_MACHINE_SDRAM + +choice + prompt "Number of column address lines" + +config OR3_COLS_7 + bool "7" + +config OR3_COLS_8 + bool "8" + +config OR3_COLS_9 + bool "9" + +config OR3_COLS_10 + bool "10" + +config OR3_COLS_11 + bool "11" + +config OR3_COLS_12 + bool "12" + +config OR3_COLS_13 + bool "13" + +config OR3_COLS_14 + bool "14" + +endchoice + +choice + prompt "Number of rows address lines" + +config OR3_ROWS_9 + bool "9" + +config OR3_ROWS_10 + bool "10" + +config OR3_ROWS_11 + bool "11" + +config OR3_ROWS_12 + bool "12" + +config OR3_ROWS_13 + bool "13" + +config OR3_ROWS_14 + bool "14" + +config OR3_ROWS_15 + bool "15" + +endchoice + +choice + prompt "Page mode select" + +config OR3_PMSEL_BTB + bool "Back-to-back" + +config OR3_PMSEL_KEPT_OPEN + bool "Page kept open until page miss or refresh" + +endchoice + +endif # BR3_MACHINE_SDRAM + +choice + prompt "Relaxed timing" + +config OR3_TRLX_NORMAL + bool "Normal" + +config OR3_TRLX_RELAXED + bool "Relaxed" + +endchoice + +choice + prompt "Extended hold time" + +config OR3_EHTR_NORMAL + depends on OR3_TRLX_NORMAL + bool "Normal" + +config OR3_EHTR_1_CYCLE + depends on OR3_TRLX_NORMAL + bool "1 idle clock cycle inserted" + +config OR3_EHTR_4_CYCLE + depends on OR3_TRLX_RELAXED + bool "4 idle clock cycles inserted" + +config OR3_EHTR_8_CYCLE + depends on OR3_TRLX_RELAXED + bool "8 idle clock cycles inserted" + +endchoice + +if !ARCH_MPC8308 + +choice + prompt "External address latch delay" + +config OR3_EAD_NONE + bool "None" + +config OR3_EAD_EXTRA + bool "Extra" + +endchoice + +endif # !ARCH_MPC8308 + +endif # ELBC_BR3_OR3 + +config BR3_PORTSIZE + hex + default 0x800 if BR3_PORTSIZE_8BIT + default 0x1000 if BR3_PORTSIZE_16BIT + default 0x1800 if BR3_PORTSIZE_32BIT + +config BR3_ERRORCHECKING + hex + default 0x0 if !BR3_MACHINE_FCM + default 0x0 if BR3_ERRORCHECKING_DISABLED + default 0x200 if BR3_ERRORCHECKING_ECC_CHECKING + default 0x400 if BR3_ERRORCHECKING_BOTH + +config BR3_WRITE_PROTECT_BIT + hex + default 0x0 if !BR3_WRITE_PROTECT + default 0x100 if BR3_WRITE_PROTECT + +config BR3_MACHINE + hex + default 0x0 if BR3_MACHINE_GPCM + default 0x20 if BR3_MACHINE_FCM + default 0x60 if BR3_MACHINE_SDRAM + default 0x80 if BR3_MACHINE_UPMA + default 0xa0 if BR3_MACHINE_UPMB + default 0xc0 if BR3_MACHINE_UPMC + +config BR3_ATOMIC + hex + default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360 + default 0x0 if BR3_ATOMIC_NONE + default 0x4 if BR3_ATOMIC_RAWA + default 0x8 if BR3_ATOMIC_WARA + +config BR3_VALID_BIT + hex + default 0x0 if !ELBC_BR3_OR3 + default 0x1 if ELBC_BR3_OR3 + +config OR3_AM + hex + default 0xffff8000 if OR3_AM_32_KBYTES && !BR3_MACHINE_SDRAM + default 0xffff0000 if OR3_AM_64_KBYTES + default 0xfffe0000 if OR3_AM_128_KBYTES + default 0xfffc0000 if OR3_AM_256_KBYTES + default 0xfff80000 if OR3_AM_512_KBYTES + default 0xfff00000 if OR3_AM_1_MBYTES + default 0xffe00000 if OR3_AM_2_MBYTES + default 0xffc00000 if OR3_AM_4_MBYTES + default 0xff800000 if OR3_AM_8_MBYTES + default 0xff000000 if OR3_AM_16_MBYTES + default 0xfe000000 if OR3_AM_32_MBYTES + default 0xfc000000 if OR3_AM_64_MBYTES + default 0xf8000000 if OR3_AM_128_MBYTES + default 0xf0000000 if OR3_AM_256_MBYTES + default 0xe0000000 if OR3_AM_512_MBYTES + default 0xc0000000 if OR3_AM_1_GBYTES + default 0x80000000 if OR3_AM_2_GBYTES + default 0x00000000 if OR3_AM_4_GBYTES + +config OR3_XAM + hex + default 0x0 if !OR3_XAM_SET + default 0x6000 if OR3_XAM_SET + +config OR3_BCTLD + hex + default 0x0 if OR3_BCTLD_ASSERTED + default 0x1000 if OR3_BCTLD_NOT_ASSERTED + +config OR3_BI + hex + default 0x0 if !BR3_MACHINE_UPM + default 0x0 if OR3_BI_BURSTSUPPORT + default 0x100 if OR3_BI_BURSTINHIBIT + +config OR3_COLS + hex + default 0x0 if !BR3_MACHINE_SDRAM + default 0x0 if OR3_COLS_7 + default 0x400 if OR3_COLS_8 + default 0x800 if OR3_COLS_9 + default 0xc00 if OR3_COLS_10 + default 0x1000 if OR3_COLS_11 + default 0x1400 if OR3_COLS_12 + default 0x1800 if OR3_COLS_13 + default 0x1c00 if OR3_COLS_14 + +config OR3_ROWS + hex + default 0x0 if !BR3_MACHINE_SDRAM + default 0x0 if OR3_ROWS_9 + default 0x40 if OR3_ROWS_10 + default 0x80 if OR3_ROWS_11 + default 0xc0 if OR3_ROWS_12 + default 0x100 if OR3_ROWS_13 + default 0x140 if OR3_ROWS_14 + default 0x180 if OR3_ROWS_15 + +config OR3_PMSEL + hex + default 0x0 if !BR3_MACHINE_SDRAM + default 0x0 if OR3_PMSEL_BTB + default 0x20 if OR3_PMSEL_KEPT_OPEN + +config OR3_SCY + hex + default 0x0 if !BR3_MACHINE_GPCM && !BR3_MACHINE_FCM + default 0x0 if OR3_SCY_0 + default 0x10 if OR3_SCY_1 + default 0x20 if OR3_SCY_2 + default 0x30 if OR3_SCY_3 + default 0x40 if OR3_SCY_4 + default 0x50 if OR3_SCY_5 + default 0x60 if OR3_SCY_6 + default 0x70 if OR3_SCY_7 + default 0x80 if OR3_SCY_8 + default 0x90 if OR3_SCY_9 + default 0xa0 if OR3_SCY_10 + default 0xb0 if OR3_SCY_11 + default 0xc0 if OR3_SCY_12 + default 0xd0 if OR3_SCY_13 + default 0xe0 if OR3_SCY_14 + default 0xf0 if OR3_SCY_15 + +config OR3_PGS + hex + default 0x0 if !BR3_MACHINE_FCM + default 0x0 if OR3_PGS_SMALL + default 0x400 if OR3_PGS_LARGE + +config OR3_CSCT + hex + default 0x0 if !BR3_MACHINE_FCM + default 0x0 if OR3_CSCT_1_CYCLE + default 0x0 if OR3_CSCT_2_CYCLE + default 0x200 if OR3_CSCT_4_CYCLE + default 0x200 if OR3_CSCT_8_CYCLE + +config OR3_CST + hex + default 0x0 if !BR3_MACHINE_FCM + default 0x0 if OR3_CST_COINCIDENT + default 0x100 if OR3_CST_QUARTER_CLOCK + default 0x0 if OR3_CST_HALF_CLOCK + default 0x100 if OR3_CST_ONE_CLOCK + +config OR3_CHT + hex + default 0x0 if !BR3_MACHINE_FCM + default 0x0 if OR3_CHT_HALF_CLOCK + default 0x80 if OR3_CHT_ONE_CLOCK + default 0x0 if OR3_CHT_ONE_HALF_CLOCK + default 0x80 if OR3_CHT_TWO_CLOCK + +config OR3_RST + hex + default 0x0 if !BR3_MACHINE_FCM + default 0x0 if OR3_RST_THREE_QUARTER_CLOCK + default 0x8 if OR3_RST_ONE_CLOCK + default 0x0 if OR3_RST_ONE_HALF_CLOCK + +config OR3_CSNT + hex + default 0x0 if !BR3_MACHINE_GPCM + default 0x0 if OR3_CSNT_NORMAL + default 0x800 if OR3_CSNT_EARLIER + +config OR3_ACS + hex + default 0x0 if !BR3_MACHINE_GPCM + default 0x0 if OR3_ACS_SAME_TIME + default 0x400 if OR3_ACS_QUARTER_CYCLE_EARLIER + default 0x600 if OR3_ACS_HALF_CYCLE_EARLIER + +config OR3_XACS + hex + default 0x0 if !BR3_MACHINE_GPCM + default 0x0 if OR3_XACS_NORMAL + default 0x100 if OR3_XACS_EXTENDED + +config OR3_SETA + hex + default 0x0 if !BR3_MACHINE_GPCM + default 0x0 if OR3_SETA_INTERNAL + default 0x8 if OR3_SETA_EXTERNAL + +config OR3_TRLX + hex + default 0x0 if OR3_TRLX_NORMAL + default 0x4 if OR3_TRLX_RELAXED + +config OR3_EHTR + hex + default 0x0 if OR3_EHTR_NORMAL + default 0x2 if OR3_EHTR_1_CYCLE + default 0x0 if OR3_EHTR_4_CYCLE + default 0x2 if OR3_EHTR_8_CYCLE + +config OR3_EAD + hex + default 0x0 if ARCH_MPC8308 + default 0x0 if OR3_EAD_NONE + default 0x1 if OR3_EAD_EXTRA diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4 new file mode 100644 index 00000000000..0063dab9622 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4 @@ -0,0 +1,733 @@ +menuconfig ELBC_BR4_OR4 + bool "ELBC BR4/OR4" + +if ELBC_BR4_OR4 + +config BR4_OR4_NAME + string "Identifier" + +config BR4_OR4_BASE + hex "Port base" + +choice + prompt "Port size" + +config BR4_PORTSIZE_8BIT + bool "8-bit" + +config BR4_PORTSIZE_16BIT + depends on !BR4_MACHINE_FCM + bool "16-bit" + + +config BR4_PORTSIZE_32BIT + depends on !BR4_MACHINE_FCM + depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379 + bool "32-bit" + +endchoice + +if BR4_MACHINE_FCM + +choice + prompt "Data Error Checking" + +config BR4_ERRORCHECKING_DISABLED + bool "Disabled" + +config BR4_ERRORCHECKING_ECC_CHECKING + bool "ECC checking / No ECC generation" + +config BR4_ERRORCHECKING_BOTH + bool "ECC checking and generation" + +endchoice + +endif + +config BR4_WRITE_PROTECT + bool "Write-protect" + +config BR4_MACHINE_UPM + bool + +choice + prompt "Machine select" + +config BR4_MACHINE_GPCM + bool "GPCM" + +config BR4_MACHINE_FCM + depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360 + bool "FCM" + +config BR4_MACHINE_SDRAM + depends on ARCH_MPC8349 || ARCH_MPC8360 + bool "SDRAM" + +config BR4_MACHINE_UPMA + select BR4_MACHINE_UPM + bool "UPM (A)" + +config BR4_MACHINE_UPMB + select BR4_MACHINE_UPM + bool "UPM (B)" + +config BR4_MACHINE_UPMC + select BR4_MACHINE_UPM + bool "UPM (C)" + +endchoice + +if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360 + +choice + prompt "Atomic operations" + +config BR4_ATOMIC_NONE + bool "No atomic operations" + +config BR4_ATOMIC_RAWA + bool "Read-after-write-atomic" + +config BR4_ATOMIC_WARA + bool "Write-after-read-atomic" + +endchoice + +endif + +if BR4_MACHINE_GPCM || BR4_MACHINE_FCM || BR4_MACHINE_UPM || BR4_MACHINE_SDRAM + +choice + prompt "Address mask" + +config OR4_AM_32_KBYTES + depends on !BR4_MACHINE_SDRAM + bool "32 kb" + +config OR4_AM_64_KBYTES + bool "64 kb" + +config OR4_AM_128_KBYTES + bool "128 kb" + +config OR4_AM_256_KBYTES + bool "256 kb" + +config OR4_AM_512_KBYTES + bool "512 kb" + +config OR4_AM_1_MBYTES + bool "1 mb" + +config OR4_AM_2_MBYTES + bool "2 mb" + +config OR4_AM_4_MBYTES + bool "4 mb" + +config OR4_AM_8_MBYTES + bool "8 mb" + +config OR4_AM_16_MBYTES + bool "16 mb" + +config OR4_AM_32_MBYTES + bool "32 mb" + +config OR4_AM_64_MBYTES + bool "64 mb" + +# XXX: Some boards define 128MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR4_AM_128_MBYTES + bool "128 mb" + +# XXX: Some boards define 256MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR4_AM_256_MBYTES + bool "256 mb" + +config OR4_AM_512_MBYTES + depends on BR4_MACHINE_FCM + bool "512 mb" + +# XXX: Some boards define 1GB AM with GPCM, even though it should not be +# possible according to the manuals +config OR4_AM_1_GBYTES + bool "1 gb" + +config OR4_AM_2_GBYTES + depends on BR4_MACHINE_FCM + bool "2 gb" + +config OR4_AM_4_GBYTES + depends on BR4_MACHINE_FCM + bool "4 gb" + +endchoice + +config OR4_XAM_SET + bool "Set unused bytes after address mask" +choice + prompt "Buffer control disable" + +config OR4_BCTLD_ASSERTED + bool "Asserted" + +config OR4_BCTLD_NOT_ASSERTED + bool "Not asserted" + +endchoice + +endif + +if BR4_MACHINE_GPCM || BR4_MACHINE_FCM + +choice + prompt "Cycle length in bus clocks" + +config OR4_SCY_0 + bool "No wait states" + +config OR4_SCY_1 + bool "1 wait state" + +config OR4_SCY_2 + bool "2 wait states" + +config OR4_SCY_3 + bool "3 wait states" + +config OR4_SCY_4 + bool "4 wait states" + +config OR4_SCY_5 + bool "5 wait states" + +config OR4_SCY_6 + bool "6 wait states" + +config OR4_SCY_7 + bool "7 wait states" + +config OR4_SCY_8 + depends on BR4_MACHINE_GPCM + bool "8 wait states" + +config OR4_SCY_9 + depends on BR4_MACHINE_GPCM + bool "9 wait states" + +config OR4_SCY_10 + depends on BR4_MACHINE_GPCM + bool "10 wait states" + +config OR4_SCY_11 + depends on BR4_MACHINE_GPCM + bool "11 wait states" + +config OR4_SCY_12 + depends on BR4_MACHINE_GPCM + bool "12 wait states" + +config OR4_SCY_13 + depends on BR4_MACHINE_GPCM + bool "13 wait states" + +config OR4_SCY_14 + depends on BR4_MACHINE_GPCM + bool "14 wait states" + +config OR4_SCY_15 + depends on BR4_MACHINE_GPCM + bool "15 wait states" + +endchoice + +endif # BR4_MACHINE_GPCM || BR4_MACHINE_FCM + +if BR4_MACHINE_GPCM + +choice + prompt "Chip select negotiation time" + +config OR4_CSNT_NORMAL + bool "Normal" + +config OR4_CSNT_EARLIER + bool "Earlier" + +endchoice + +choice + prompt "Address to chip-select setup" + +config OR4_ACS_SAME_TIME + bool "At the same time" + +config OR4_ACS_HALF_CYCLE_EARLIER + bool "Half of a bus clock cycle earlier" + +config OR4_ACS_QUARTER_CYCLE_EARLIER + bool "Half/Quarter of a bus clock cycle earlier" + +endchoice + +choice + prompt "Extra address to check-select setup" + +config OR4_XACS_NORMAL + bool "Normal" + +config OR4_XACS_EXTENDED + bool "Extended" + +endchoice + +choice + prompt "External address termination" + +config OR4_SETA_INTERNAL + bool "Access is terminated internally" + +config OR4_SETA_EXTERNAL + bool "Access is terminated externally" + +endchoice + +endif # BR4_MACHINE_GPCM + +if BR4_MACHINE_FCM + +choice + prompt "NAND Flash EEPROM page size" + +config OR4_PGS_SMALL + bool "Small page device" + +config OR4_PGS_LARGE + bool "Large page device" + +endchoice + +choice + prompt "Chip select to command time" + +config OR4_CSCT_1_CYCLE + depends on OR4_TRLX_NORMAL + bool "1 cycle" + +config OR4_CSCT_2_CYCLE + depends on OR4_TRLX_RELAXED + bool "2 cycles" + +config OR4_CSCT_4_CYCLE + depends on OR4_TRLX_NORMAL + bool "4 cycles" + +config OR4_CSCT_8_CYCLE + depends on OR4_TRLX_RELAXED + bool "8 cycles" + +endchoice + +choice + prompt "Command setup time" + +config OR4_CST_COINCIDENT + depends on OR4_TRLX_NORMAL + bool "Coincident with any command" + +config OR4_CST_QUARTER_CLOCK + depends on OR4_TRLX_NORMAL + bool "0.25 clocks after" + +config OR4_CST_HALF_CLOCK + depends on OR4_TRLX_RELAXED + bool "0.5 clocks after" + +config OR4_CST_ONE_CLOCK + depends on OR4_TRLX_RELAXED + bool "1 clock after" + +endchoice + +choice + prompt "Command hold time" + +config OR4_CHT_HALF_CLOCK + depends on OR4_TRLX_NORMAL + bool "0.5 clocks before" + +config OR4_CHT_ONE_CLOCK + depends on OR4_TRLX_NORMAL + bool "1 clock before" + +config OR4_CHT_ONE_HALF_CLOCK + depends on OR4_TRLX_RELAXED + bool "1.5 clocks before" + +config OR4_CHT_TWO_CLOCK + depends on OR4_TRLX_RELAXED + bool "2 clocks before" + +endchoice + +choice + prompt "Reset setup time" + +config OR4_RST_THREE_QUARTER_CLOCK + depends on OR4_TRLX_NORMAL + bool "0.75 clocks prior" + +config OR4_RST_ONE_HALF_CLOCK + depends on OR4_TRLX_RELAXED + bool "0.5 clocks prior" + +config OR4_RST_ONE_CLOCK + bool "1 clock prior" + +endchoice + +endif # BR4_MACHINE_FCM + +if BR4_MACHINE_UPM + +choice + prompt "Burst inhibit" + +config OR4_BI_BURSTSUPPORT + bool "Support burst access" + +config OR4_BI_BURSTINHIBIT + bool "Inhibit burst access" + +endchoice + +endif # BR4_MACHINE_UPM + +if BR4_MACHINE_SDRAM + +choice + prompt "Number of column address lines" + +config OR4_COLS_7 + bool "7" + +config OR4_COLS_8 + bool "8" + +config OR4_COLS_9 + bool "9" + +config OR4_COLS_10 + bool "10" + +config OR4_COLS_11 + bool "11" + +config OR4_COLS_12 + bool "12" + +config OR4_COLS_13 + bool "13" + +config OR4_COLS_14 + bool "14" + +endchoice + +choice + prompt "Number of rows address lines" + +config OR4_ROWS_9 + bool "9" + +config OR4_ROWS_10 + bool "10" + +config OR4_ROWS_11 + bool "11" + +config OR4_ROWS_12 + bool "12" + +config OR4_ROWS_13 + bool "13" + +config OR4_ROWS_14 + bool "14" + +config OR4_ROWS_15 + bool "15" + +endchoice + +choice + prompt "Page mode select" + +config OR4_PMSEL_BTB + bool "Back-to-back" + +config OR4_PMSEL_KEPT_OPEN + bool "Page kept open until page miss or refresh" + +endchoice + +endif # BR4_MACHINE_SDRAM + +choice + prompt "Relaxed timing" + +config OR4_TRLX_NORMAL + bool "Normal" + +config OR4_TRLX_RELAXED + bool "Relaxed" + +endchoice + +choice + prompt "Extended hold time" + +config OR4_EHTR_NORMAL + depends on OR4_TRLX_NORMAL + bool "Normal" + +config OR4_EHTR_1_CYCLE + depends on OR4_TRLX_NORMAL + bool "1 idle clock cycle inserted" + +config OR4_EHTR_4_CYCLE + depends on OR4_TRLX_RELAXED + bool "4 idle clock cycles inserted" + +config OR4_EHTR_8_CYCLE + depends on OR4_TRLX_RELAXED + bool "8 idle clock cycles inserted" + +endchoice + +if !ARCH_MPC8308 + +choice + prompt "External address latch delay" + +config OR4_EAD_NONE + bool "None" + +config OR4_EAD_EXTRA + bool "Extra" + +endchoice + +endif # !ARCH_MPC8308 + +endif # ELBC_BR4_OR4 + +config BR4_PORTSIZE + hex + default 0x800 if BR4_PORTSIZE_8BIT + default 0x1000 if BR4_PORTSIZE_16BIT + default 0x1800 if BR4_PORTSIZE_32BIT + +config BR4_ERRORCHECKING + hex + default 0x0 if !BR4_MACHINE_FCM + default 0x0 if BR4_ERRORCHECKING_DISABLED + default 0x200 if BR4_ERRORCHECKING_ECC_CHECKING + default 0x400 if BR4_ERRORCHECKING_BOTH + +config BR4_WRITE_PROTECT_BIT + hex + default 0x0 if !BR4_WRITE_PROTECT + default 0x100 if BR4_WRITE_PROTECT + +config BR4_MACHINE + hex + default 0x0 if BR4_MACHINE_GPCM + default 0x20 if BR4_MACHINE_FCM + default 0x60 if BR4_MACHINE_SDRAM + default 0x80 if BR4_MACHINE_UPMA + default 0xa0 if BR4_MACHINE_UPMB + default 0xc0 if BR4_MACHINE_UPMC + +config BR4_ATOMIC + hex + default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360 + default 0x0 if BR4_ATOMIC_NONE + default 0x4 if BR4_ATOMIC_RAWA + default 0x8 if BR4_ATOMIC_WARA + +config BR4_VALID_BIT + hex + default 0x0 if !ELBC_BR4_OR4 + default 0x1 if ELBC_BR4_OR4 + +config OR4_AM + hex + default 0xffff8000 if OR4_AM_32_KBYTES && !BR4_MACHINE_SDRAM + default 0xffff0000 if OR4_AM_64_KBYTES + default 0xfffe0000 if OR4_AM_128_KBYTES + default 0xfffc0000 if OR4_AM_256_KBYTES + default 0xfff80000 if OR4_AM_512_KBYTES + default 0xfff00000 if OR4_AM_1_MBYTES + default 0xffe00000 if OR4_AM_2_MBYTES + default 0xffc00000 if OR4_AM_4_MBYTES + default 0xff800000 if OR4_AM_8_MBYTES + default 0xff000000 if OR4_AM_16_MBYTES + default 0xfe000000 if OR4_AM_32_MBYTES + default 0xfc000000 if OR4_AM_64_MBYTES + default 0xf8000000 if OR4_AM_128_MBYTES + default 0xf0000000 if OR4_AM_256_MBYTES + default 0xe0000000 if OR4_AM_512_MBYTES + default 0xc0000000 if OR4_AM_1_GBYTES + default 0x80000000 if OR4_AM_2_GBYTES + default 0x00000000 if OR4_AM_4_GBYTES + +config OR4_XAM + hex + default 0x0 if !OR4_XAM_SET + default 0x6000 if OR4_XAM_SET + +config OR4_BCTLD + hex + default 0x0 if OR4_BCTLD_ASSERTED + default 0x1000 if OR4_BCTLD_NOT_ASSERTED + +config OR4_BI + hex + default 0x0 if !BR4_MACHINE_UPM + default 0x0 if OR4_BI_BURSTSUPPORT + default 0x100 if OR4_BI_BURSTINHIBIT + +config OR4_COLS + hex + default 0x0 if !BR4_MACHINE_SDRAM + default 0x0 if OR4_COLS_7 + default 0x400 if OR4_COLS_8 + default 0x800 if OR4_COLS_9 + default 0xc00 if OR4_COLS_10 + default 0x1000 if OR4_COLS_11 + default 0x1400 if OR4_COLS_12 + default 0x1800 if OR4_COLS_13 + default 0x1c00 if OR4_COLS_14 + +config OR4_ROWS + hex + default 0x0 if !BR4_MACHINE_SDRAM + default 0x0 if OR4_ROWS_9 + default 0x40 if OR4_ROWS_10 + default 0x80 if OR4_ROWS_11 + default 0xc0 if OR4_ROWS_12 + default 0x100 if OR4_ROWS_13 + default 0x140 if OR4_ROWS_14 + default 0x180 if OR4_ROWS_15 + +config OR4_PMSEL + hex + default 0x0 if !BR4_MACHINE_SDRAM + default 0x0 if OR4_PMSEL_BTB + default 0x20 if OR4_PMSEL_KEPT_OPEN + +config OR4_SCY + hex + default 0x0 if !BR4_MACHINE_GPCM && !BR4_MACHINE_FCM + default 0x0 if OR4_SCY_0 + default 0x10 if OR4_SCY_1 + default 0x20 if OR4_SCY_2 + default 0x30 if OR4_SCY_3 + default 0x40 if OR4_SCY_4 + default 0x50 if OR4_SCY_5 + default 0x60 if OR4_SCY_6 + default 0x70 if OR4_SCY_7 + default 0x80 if OR4_SCY_8 + default 0x90 if OR4_SCY_9 + default 0xa0 if OR4_SCY_10 + default 0xb0 if OR4_SCY_11 + default 0xc0 if OR4_SCY_12 + default 0xd0 if OR4_SCY_13 + default 0xe0 if OR4_SCY_14 + default 0xf0 if OR4_SCY_15 + +config OR4_PGS + hex + default 0x0 if !BR4_MACHINE_FCM + default 0x0 if OR4_PGS_SMALL + default 0x400 if OR4_PGS_LARGE + +config OR4_CSCT + hex + default 0x0 if !BR4_MACHINE_FCM + default 0x0 if OR4_CSCT_1_CYCLE + default 0x0 if OR4_CSCT_2_CYCLE + default 0x200 if OR4_CSCT_4_CYCLE + default 0x200 if OR4_CSCT_8_CYCLE + +config OR4_CST + hex + default 0x0 if !BR4_MACHINE_FCM + default 0x0 if OR4_CST_COINCIDENT + default 0x100 if OR4_CST_QUARTER_CLOCK + default 0x0 if OR4_CST_HALF_CLOCK + default 0x100 if OR4_CST_ONE_CLOCK + +config OR4_CHT + hex + default 0x0 if !BR4_MACHINE_FCM + default 0x0 if OR4_CHT_HALF_CLOCK + default 0x80 if OR4_CHT_ONE_CLOCK + default 0x0 if OR4_CHT_ONE_HALF_CLOCK + default 0x80 if OR4_CHT_TWO_CLOCK + +config OR4_RST + hex + default 0x0 if !BR4_MACHINE_FCM + default 0x0 if OR4_RST_THREE_QUARTER_CLOCK + default 0x8 if OR4_RST_ONE_CLOCK + default 0x0 if OR4_RST_ONE_HALF_CLOCK + +config OR4_CSNT + hex + default 0x0 if !BR4_MACHINE_GPCM + default 0x0 if OR4_CSNT_NORMAL + default 0x800 if OR4_CSNT_EARLIER + +config OR4_ACS + hex + default 0x0 if !BR4_MACHINE_GPCM + default 0x0 if OR4_ACS_SAME_TIME + default 0x400 if OR4_ACS_QUARTER_CYCLE_EARLIER + default 0x600 if OR4_ACS_HALF_CYCLE_EARLIER + +config OR4_XACS + hex + default 0x0 if !BR4_MACHINE_GPCM + default 0x0 if OR4_XACS_NORMAL + default 0x100 if OR4_XACS_EXTENDED + +config OR4_SETA + hex + default 0x0 if !BR4_MACHINE_GPCM + default 0x0 if OR4_SETA_INTERNAL + default 0x8 if OR4_SETA_EXTERNAL + +config OR4_TRLX + hex + default 0x0 if OR4_TRLX_NORMAL + default 0x4 if OR4_TRLX_RELAXED + +config OR4_EHTR + hex + default 0x0 if OR4_EHTR_NORMAL + default 0x2 if OR4_EHTR_1_CYCLE + default 0x0 if OR4_EHTR_4_CYCLE + default 0x2 if OR4_EHTR_8_CYCLE + +config OR4_EAD + hex + default 0x0 if ARCH_MPC8308 + default 0x0 if OR4_EAD_NONE + default 0x1 if OR4_EAD_EXTRA diff --git a/arch/powerpc/cpu/mpc83xx/elbc/elbc.h b/arch/powerpc/cpu/mpc83xx/elbc/elbc.h new file mode 100644 index 00000000000..245fe7c6fb7 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/elbc.h @@ -0,0 +1,186 @@ +#ifdef CONFIG_ELBC_BR0_OR0 +#define CONFIG_SYS_BR0_PRELIM (\ + CONFIG_BR0_OR0_BASE |\ + CONFIG_BR0_PORTSIZE |\ + CONFIG_BR0_ERRORCHECKING |\ + CONFIG_BR0_WRITE_PROTECT_BIT |\ + CONFIG_BR0_MACHINE |\ + CONFIG_BR0_ATOMIC |\ + CONFIG_BR0_VALID_BIT \ +) +#define CONFIG_SYS_OR0_PRELIM (\ + CONFIG_OR0_AM |\ + CONFIG_OR0_XAM |\ + CONFIG_OR0_BCTLD |\ + CONFIG_OR0_BI |\ + CONFIG_OR0_COLS |\ + CONFIG_OR0_ROWS |\ + CONFIG_OR0_PMSEL |\ + CONFIG_OR0_SCY |\ + CONFIG_OR0_PGS |\ + CONFIG_OR0_CSCT |\ + CONFIG_OR0_CST |\ + CONFIG_OR0_CHT |\ + CONFIG_OR0_RST |\ + CONFIG_OR0_CSNT |\ + CONFIG_OR0_ACS |\ + CONFIG_OR0_XACS |\ + CONFIG_OR0_SETA |\ + CONFIG_OR0_TRLX |\ + CONFIG_OR0_EHTR |\ + CONFIG_OR0_EAD \ +) +#endif /* CONFIG_ELBC_BR0_OR0 */ + +#ifdef CONFIG_ELBC_BR1_OR1 +#define CONFIG_SYS_BR1_PRELIM (\ + CONFIG_BR1_OR1_BASE |\ + CONFIG_BR1_PORTSIZE |\ + CONFIG_BR1_ERRORCHECKING |\ + CONFIG_BR1_WRITE_PROTECT_BIT |\ + CONFIG_BR1_MACHINE |\ + CONFIG_BR1_ATOMIC |\ + CONFIG_BR1_VALID_BIT \ +) +#define CONFIG_SYS_OR1_PRELIM (\ + CONFIG_OR1_AM |\ + CONFIG_OR1_XAM |\ + CONFIG_OR1_BCTLD |\ + CONFIG_OR1_BI |\ + CONFIG_OR1_COLS |\ + CONFIG_OR1_ROWS |\ + CONFIG_OR1_PMSEL |\ + CONFIG_OR1_SCY |\ + CONFIG_OR1_PGS |\ + CONFIG_OR1_CSCT |\ + CONFIG_OR1_CST |\ + CONFIG_OR1_CHT |\ + CONFIG_OR1_RST |\ + CONFIG_OR1_CSNT |\ + CONFIG_OR1_ACS |\ + CONFIG_OR1_XACS |\ + CONFIG_OR1_SETA |\ + CONFIG_OR1_TRLX |\ + CONFIG_OR1_EHTR |\ + CONFIG_OR1_EAD \ +) +#endif /* CONFIG_ELBC_BR1_OR1 */ + +#ifdef CONFIG_ELBC_BR2_OR2 +#define CONFIG_SYS_BR2_PRELIM (\ + CONFIG_BR2_OR2_BASE |\ + CONFIG_BR2_PORTSIZE |\ + CONFIG_BR2_ERRORCHECKING |\ + CONFIG_BR2_WRITE_PROTECT_BIT |\ + CONFIG_BR2_MACHINE |\ + CONFIG_BR2_ATOMIC |\ + CONFIG_BR2_VALID_BIT \ +) +#define CONFIG_SYS_OR2_PRELIM (\ + CONFIG_OR2_AM |\ + CONFIG_OR2_XAM |\ + CONFIG_OR2_BCTLD |\ + CONFIG_OR2_BI |\ + CONFIG_OR2_COLS |\ + CONFIG_OR2_ROWS |\ + CONFIG_OR2_PMSEL |\ + CONFIG_OR2_SCY |\ + CONFIG_OR2_PGS |\ + CONFIG_OR2_CSCT |\ + CONFIG_OR2_CST |\ + CONFIG_OR2_CHT |\ + CONFIG_OR2_RST |\ + CONFIG_OR2_CSNT |\ + CONFIG_OR2_ACS |\ + CONFIG_OR2_XACS |\ + CONFIG_OR2_SETA |\ + CONFIG_OR2_TRLX |\ + CONFIG_OR2_EHTR |\ + CONFIG_OR2_EAD \ +) +#endif /* CONFIG_ELBC_BR2_OR2 */ + +#ifdef CONFIG_ELBC_BR3_OR3 +#define CONFIG_SYS_BR3_PRELIM (\ + CONFIG_BR3_OR3_BASE |\ + CONFIG_BR3_PORTSIZE |\ + CONFIG_BR3_ERRORCHECKING |\ + CONFIG_BR3_WRITE_PROTECT_BIT |\ + CONFIG_BR3_MACHINE |\ + CONFIG_BR3_ATOMIC |\ + CONFIG_BR3_VALID_BIT \ +) +#define CONFIG_SYS_OR3_PRELIM (\ + CONFIG_OR3_AM |\ + CONFIG_OR3_XAM |\ + CONFIG_OR3_BCTLD |\ + CONFIG_OR3_BI |\ + CONFIG_OR3_COLS |\ + CONFIG_OR3_ROWS |\ + CONFIG_OR3_PMSEL |\ + CONFIG_OR3_SCY |\ + CONFIG_OR3_PGS |\ + CONFIG_OR3_CSCT |\ + CONFIG_OR3_CST |\ + CONFIG_OR3_CHT |\ + CONFIG_OR3_RST |\ + CONFIG_OR3_CSNT |\ + CONFIG_OR3_ACS |\ + CONFIG_OR3_XACS |\ + CONFIG_OR3_SETA |\ + CONFIG_OR3_TRLX |\ + CONFIG_OR3_EHTR |\ + CONFIG_OR3_EAD \ +) +#endif /* CONFIG_ELBC_BR3_OR3 */ + +#ifdef CONFIG_ELBC_BR4_OR4 +#define CONFIG_SYS_BR4_PRELIM (\ + CONFIG_BR4_OR4_BASE |\ + CONFIG_BR4_PORTSIZE |\ + CONFIG_BR4_ERRORCHECKING |\ + CONFIG_BR4_WRITE_PROTECT_BIT |\ + CONFIG_BR4_MACHINE |\ + CONFIG_BR4_ATOMIC |\ + CONFIG_BR4_VALID_BIT \ +) +#define CONFIG_SYS_OR4_PRELIM (\ + CONFIG_OR4_AM |\ + CONFIG_OR4_XAM |\ + CONFIG_OR4_BCTLD |\ + CONFIG_OR4_BI |\ + CONFIG_OR4_COLS |\ + CONFIG_OR4_ROWS |\ + CONFIG_OR4_PMSEL |\ + CONFIG_OR4_SCY |\ + CONFIG_OR4_PGS |\ + CONFIG_OR4_CSCT |\ + CONFIG_OR4_CST |\ + CONFIG_OR4_CHT |\ + CONFIG_OR4_RST |\ + CONFIG_OR4_CSNT |\ + CONFIG_OR4_ACS |\ + CONFIG_OR4_XACS |\ + CONFIG_OR4_SETA |\ + CONFIG_OR4_TRLX |\ + CONFIG_OR4_EHTR |\ + CONFIG_OR4_EAD \ +) +#endif /* CONFIG_ELBC_BR4_OR4 */ + +#if defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_0) +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR0_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR0_PRELIM +#elif defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_1) +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR1_PRELIM +#elif defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_2) +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR2_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR2_PRELIM +#elif defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_3) +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR3_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR3_PRELIM +#elif defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_4) +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR4_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR4_PRELIM +#endif diff --git a/arch/powerpc/cpu/mpc83xx/spl_minimal.c b/arch/powerpc/cpu/mpc83xx/spl_minimal.c index 75eb65010ec..b4e2fb1119d 100644 --- a/arch/powerpc/cpu/mpc83xx/spl_minimal.c +++ b/arch/powerpc/cpu/mpc83xx/spl_minimal.c @@ -7,6 +7,7 @@ #include <mpc83xx.h> #include "lblaw/lblaw.h" +#include "elbc/elbc.h" DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c index 13545fc6ad6..c43732f7c5c 100644 --- a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c +++ b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c @@ -6,6 +6,10 @@ #include <common.h> #include <asm/fsl_lbc.h> +#ifdef CONFIG_MPC83xx +#include "../mpc83xx/elbc/elbc.h" +#endif + #ifdef CONFIG_MPC85xx /* Boards should provide their own version of this if they use lbc sdram */ static void __lbc_sdram_init(void) |