summaryrefslogtreecommitdiff
path: root/arch/powerpc/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/cpu')
-rw-r--r--arch/powerpc/cpu/mpc8xx/Kconfig51
-rw-r--r--arch/powerpc/cpu/mpc8xx/Makefile25
-rw-r--r--arch/powerpc/cpu/mpc8xx/bedbug_860.c314
-rw-r--r--arch/powerpc/cpu/mpc8xx/config.mk8
-rw-r--r--arch/powerpc/cpu/mpc8xx/cpu.c580
-rw-r--r--arch/powerpc/cpu/mpc8xx/cpu_init.c218
-rw-r--r--arch/powerpc/cpu/mpc8xx/fdt.c27
-rw-r--r--arch/powerpc/cpu/mpc8xx/fec.c933
-rw-r--r--arch/powerpc/cpu/mpc8xx/fec.h12
-rw-r--r--arch/powerpc/cpu/mpc8xx/interrupts.c278
-rw-r--r--arch/powerpc/cpu/mpc8xx/kgdb.S54
-rw-r--r--arch/powerpc/cpu/mpc8xx/plprcr_write.S119
-rw-r--r--arch/powerpc/cpu/mpc8xx/scc.c472
-rw-r--r--arch/powerpc/cpu/mpc8xx/serial.c676
-rw-r--r--arch/powerpc/cpu/mpc8xx/speed.c403
-rw-r--r--arch/powerpc/cpu/mpc8xx/spi.c533
-rw-r--r--arch/powerpc/cpu/mpc8xx/start.S650
-rw-r--r--arch/powerpc/cpu/mpc8xx/traps.c216
-rw-r--r--arch/powerpc/cpu/mpc8xx/upatch.c194
-rw-r--r--arch/powerpc/cpu/mpc8xx/video.c1123
-rw-r--r--arch/powerpc/cpu/ppc4xx/4xx_uart.c1
-rw-r--r--arch/powerpc/cpu/ppc4xx/interrupts.c1
-rw-r--r--arch/powerpc/cpu/ppc4xx/miiphy.c1
-rw-r--r--arch/powerpc/cpu/ppc4xx/uic.c1
-rw-r--r--arch/powerpc/cpu/ppc4xx/xilinx_irq.c1
25 files changed, 0 insertions, 6891 deletions
diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig
deleted file mode 100644
index 79cee35fb1..0000000000
--- a/arch/powerpc/cpu/mpc8xx/Kconfig
+++ /dev/null
@@ -1,51 +0,0 @@
-menu "mpc8xx CPU"
- depends on 8xx
-
-config SYS_CPU
- default "mpc8xx"
-
-choice
- prompt "Target select"
- optional
-
-config TARGET_TQM823L
- bool "Support TQM823L"
-
-config TARGET_TQM823M
- bool "Support TQM823M"
-
-config TARGET_TQM850L
- bool "Support TQM850L"
-
-config TARGET_TQM850M
- bool "Support TQM850M"
-
-config TARGET_TQM855L
- bool "Support TQM855L"
-
-config TARGET_TQM855M
- bool "Support TQM855M"
-
-config TARGET_TQM860L
- bool "Support TQM860L"
-
-config TARGET_TQM860M
- bool "Support TQM860M"
-
-config TARGET_TQM862L
- bool "Support TQM862L"
-
-config TARGET_TQM862M
- bool "Support TQM862M"
-
-config TARGET_TQM866M
- bool "Support TQM866M"
-
-config TARGET_TQM885D
- bool "Support TQM885D"
-
-endchoice
-
-source "board/tqc/tqm8xx/Kconfig"
-
-endmenu
diff --git a/arch/powerpc/cpu/mpc8xx/Makefile b/arch/powerpc/cpu/mpc8xx/Makefile
deleted file mode 100644
index fc91a054f0..0000000000
--- a/arch/powerpc/cpu/mpc8xx/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-# ccflags-y += -DET_DEBUG
-
-extra-y += start.o
-extra-y += traps.o
-obj-y += bedbug_860.o
-obj-y += cpu.o
-obj-y += cpu_init.o
-obj-y += fec.o
-obj-$(CONFIG_OF_LIBFDT) += fdt.o
-obj-y += interrupts.o
-obj-y += scc.o
-obj-y += serial.o
-obj-y += speed.o
-obj-y += spi.o
-obj-y += upatch.o
-obj-y += video.o
-obj-y += kgdb.o
-obj-y += plprcr_write.o
diff --git a/arch/powerpc/cpu/mpc8xx/bedbug_860.c b/arch/powerpc/cpu/mpc8xx/bedbug_860.c
deleted file mode 100644
index c0016f72ff..0000000000
--- a/arch/powerpc/cpu/mpc8xx/bedbug_860.c
+++ /dev/null
@@ -1,314 +0,0 @@
-/*
- * Bedbug Functions specific to the MPC860 chip
- */
-
-#include <common.h>
-#include <command.h>
-#include <linux/ctype.h>
-#include <bedbug/bedbug.h>
-#include <bedbug/regs.h>
-#include <bedbug/ppc.h>
-#include <bedbug/type.h>
-
-#if defined(CONFIG_CMD_BEDBUG) && defined(CONFIG_8xx)
-
-#define MAX_BREAK_POINTS 2
-
-extern CPU_DEBUG_CTX bug_ctx;
-
-void bedbug860_init __P((void));
-void bedbug860_do_break __P((cmd_tbl_t*,int,int,char*const[]));
-void bedbug860_break_isr __P((struct pt_regs*));
-int bedbug860_find_empty __P((void));
-int bedbug860_set __P((int,unsigned long));
-int bedbug860_clear __P((int));
-
-
-/* ======================================================================
- * Initialize the global bug_ctx structure for the MPC860. Clear all
- * of the breakpoints.
- * ====================================================================== */
-
-void bedbug860_init( void )
-{
- int i;
- /* -------------------------------------------------- */
-
- bug_ctx.hw_debug_enabled = 0;
- bug_ctx.stopped = 0;
- bug_ctx.current_bp = 0;
- bug_ctx.regs = NULL;
-
- bug_ctx.do_break = bedbug860_do_break;
- bug_ctx.break_isr = bedbug860_break_isr;
- bug_ctx.find_empty = bedbug860_find_empty;
- bug_ctx.set = bedbug860_set;
- bug_ctx.clear = bedbug860_clear;
-
- for( i = 1; i <= MAX_BREAK_POINTS; ++i )
- (*bug_ctx.clear)( i );
-
- puts ("BEDBUG:ready\n");
- return;
-} /* bedbug_init_breakpoints */
-
-
-
-/* ======================================================================
- * Set/clear/show one of the hardware breakpoints for the 860. The "off"
- * string will disable a specific breakpoint. The "show" string will
- * display the current breakpoints. Otherwise an address will set a
- * breakpoint at that address. Setting a breakpoint uses the CPU-specific
- * set routine which will assign a breakpoint number.
- * ====================================================================== */
-
-void bedbug860_do_break (cmd_tbl_t *cmdtp, int flag, int argc,
- char * const argv[])
-{
- long addr = 0; /* Address to break at */
- int which_bp; /* Breakpoint number */
- /* -------------------------------------------------- */
-
- if (argc < 2) {
- cmd_usage(cmdtp);
- return;
- }
-
- /* Turn off a breakpoint */
-
- if( strcmp( argv[ 1 ], "off" ) == 0 )
- {
- if( bug_ctx.hw_debug_enabled == 0 )
- {
- printf( "No breakpoints enabled\n" );
- return;
- }
-
- which_bp = simple_strtoul( argv[ 2 ], NULL, 10 );
-
- if( bug_ctx.clear )
- (*bug_ctx.clear)( which_bp );
-
- printf( "Breakpoint %d removed\n", which_bp );
- return;
- }
-
- /* Show a list of breakpoints */
-
- if( strcmp( argv[ 1 ], "show" ) == 0 )
- {
- for( which_bp = 1; which_bp <= MAX_BREAK_POINTS; ++which_bp )
- {
-
- switch( which_bp )
- {
- case 1: addr = GET_CMPA(); break;
- case 2: addr = GET_CMPB(); break;
- case 3: addr = GET_CMPC(); break;
- case 4: addr = GET_CMPD(); break;
- }
-
- printf( "Breakpoint [%d]: ", which_bp );
- if( addr == 0 )
- printf( "NOT SET\n" );
- else
- disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX );
- }
- return;
- }
-
- /* Set a breakpoint at the address */
-
- if( !isdigit( argv[ 1 ][ 0 ])) {
- cmd_usage(cmdtp);
- return;
- }
-
- addr = simple_strtoul( argv[ 1 ], NULL, 16 ) & 0xfffffffc;
-
- if(( bug_ctx.set ) && ( which_bp = (*bug_ctx.set)( 0, addr )) > 0 )
- {
- printf( "Breakpoint [%d]: ", which_bp );
- disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX );
- }
-
- return;
-} /* bedbug860_do_break */
-
-
-
-/* ======================================================================
- * Handle a breakpoint. First determine which breakpoint was hit by
- * looking at the DeBug Status Register (DBSR), clear the breakpoint
- * and enter a mini main loop. Stay in the loop until the stopped flag
- * in the debug context is cleared.
- * ====================================================================== */
-
-void bedbug860_break_isr( struct pt_regs *regs )
-{
- unsigned long addr; /* Address stopped at */
- unsigned long cause; /* Address stopped at */
- /* -------------------------------------------------- */
-
- cause = GET_ICR();
-
- if( !(cause & 0x00000004)) {
- printf( "Not an instruction breakpoint (ICR 0x%08lx)\n", cause );
- return;
- }
-
- addr = regs->nip;
-
- if( addr == GET_CMPA() )
- {
- bug_ctx.current_bp = 1;
- }
- else if( addr == GET_CMPB() )
- {
- bug_ctx.current_bp = 2;
- }
- else if( addr == GET_CMPC() )
- {
- bug_ctx.current_bp = 3;
- }
- else if( addr == GET_CMPD() )
- {
- bug_ctx.current_bp = 4;
- }
-
- bedbug_main_loop( addr, regs );
- return;
-} /* bedbug860_break_isr */
-
-
-
-/* ======================================================================
- * Look through all of the hardware breakpoints available to see if one
- * is unused.
- * ====================================================================== */
-
-int bedbug860_find_empty( void )
-{
- /* -------------------------------------------------- */
-
- if( GET_CMPA() == 0 )
- return 1;
-
- if( GET_CMPB() == 0 )
- return 2;
-
- if( GET_CMPC() == 0 )
- return 3;
-
- if( GET_CMPD() == 0 )
- return 4;
-
- return 0;
-} /* bedbug860_find_empty */
-
-
-
-/* ======================================================================
- * Set a breakpoint. If 'which_bp' is zero then find an unused breakpoint
- * number, otherwise reassign the given breakpoint. If hardware debugging
- * is not enabled, then turn it on via the MSR and DBCR0. Set the break
- * address in the appropriate IACx register and enable proper address
- * beakpoint in DBCR0.
- * ====================================================================== */
-
-int bedbug860_set( int which_bp, unsigned long addr )
-{
- /* -------------------------------------------------- */
-
- /* Only look if which_bp == 0, else use which_bp */
- if(( bug_ctx.find_empty ) && ( !which_bp ) &&
- ( which_bp = (*bug_ctx.find_empty)()) == 0 )
- {
- printf( "All breakpoints in use\n" );
- return 0;
- }
-
- if( which_bp < 1 || which_bp > MAX_BREAK_POINTS )
- {
- printf( "Invalid break point # %d\n", which_bp );
- return 0;
- }
-
- if( ! bug_ctx.hw_debug_enabled )
- {
- bug_ctx.hw_debug_enabled = 1;
- SET_DER( GET_DER() | 0x00000004 );
- }
-
- switch( which_bp )
- {
- case 1:
- SET_CMPA( addr );
- SET_ICTRL( GET_ICTRL() | 0x80080800 ); /* CTA=Equal,IW0=Match A,SIW0EN */
- break;
-
- case 2:
- SET_CMPB( addr );
- SET_ICTRL( GET_ICTRL() | 0x10020400 ); /* CTB=Equal,IW1=Match B,SIW1EN */
- break;
-
- case 3:
- SET_CMPC( addr );
- SET_ICTRL( GET_ICTRL() | 0x02008200 ); /* CTC=Equal,IW2=Match C,SIW2EN */
- break;
-
- case 4:
- SET_CMPD( addr );
- SET_ICTRL( GET_ICTRL() | 0x00404100 ); /* CTD=Equal,IW3=Match D,SIW3EN */
- break;
- }
-
- return which_bp;
-} /* bedbug860_set */
-
-
-
-/* ======================================================================
- * Disable a specific breakoint by setting the appropriate IACx register
- * to zero and claring the instruction address breakpoint in DBCR0.
- * ====================================================================== */
-
-int bedbug860_clear( int which_bp )
-{
- /* -------------------------------------------------- */
-
- if( which_bp < 1 || which_bp > MAX_BREAK_POINTS )
- {
- printf( "Invalid break point # (%d)\n", which_bp );
- return -1;
- }
-
- switch( which_bp )
- {
- case 1:
- SET_CMPA( 0 );
- SET_ICTRL( GET_ICTRL() & ~0x80080800 ); /* CTA=Equal,IW0=Match A,SIW0EN */
- break;
-
- case 2:
- SET_CMPB( 0 );
- SET_ICTRL( GET_ICTRL() & ~0x10020400 ); /* CTB=Equal,IW1=Match B,SIW1EN */
- break;
-
- case 3:
- SET_CMPC( 0 );
- SET_ICTRL( GET_ICTRL() & ~0x02008200 ); /* CTC=Equal,IW2=Match C,SIW2EN */
- break;
-
- case 4:
- SET_CMPD( 0 );
- SET_ICTRL( GET_ICTRL() & ~0x00404100 ); /* CTD=Equal,IW3=Match D,SIW3EN */
- break;
- }
-
- return 0;
-} /* bedbug860_clear */
-
-
-/* ====================================================================== */
-#endif
diff --git a/arch/powerpc/cpu/mpc8xx/config.mk b/arch/powerpc/cpu/mpc8xx/config.mk
deleted file mode 100644
index 485e43d2de..0000000000
--- a/arch/powerpc/cpu/mpc8xx/config.mk
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2010
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -mstring -mcpu=860 -msoft-float
diff --git a/arch/powerpc/cpu/mpc8xx/cpu.c b/arch/powerpc/cpu/mpc8xx/cpu.c
deleted file mode 100644
index 105be9ccc7..0000000000
--- a/arch/powerpc/cpu/mpc8xx/cpu.c
+++ /dev/null
@@ -1,580 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * m8xx.c
- *
- * CPU specific code
- *
- * written or collected and sometimes rewritten by
- * Magnus Damm <damm@bitsmart.com>
- *
- * minor modifications by
- * Wolfgang Denk <wd@denx.de>
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <mpc8xx.h>
-#include <commproc.h>
-#include <netdev.h>
-#include <asm/cache.h>
-#include <linux/compiler.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#include <fdt_support.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static char *cpu_warning = "\n " \
- "*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***";
-
-#if ((defined(CONFIG_MPC86x) || defined(CONFIG_MPC855)) && \
- !defined(CONFIG_MPC862))
-
-static int check_CPU (long clock, uint pvr, uint immr)
-{
- char *id_str =
-# if defined(CONFIG_MPC855)
- "PC855";
-# elif defined(CONFIG_MPC860P)
- "PC860P";
-# else
- NULL;
-# endif
- volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
- uint k, m;
- char buf[32];
- char pre = 'X';
- char *mid = "xx";
- char *suf;
-
- /* the highest 16 bits should be 0x0050 for a 860 */
-
- if ((pvr >> 16) != 0x0050)
- return -1;
-
- k = (immr << 16) |
- immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)];
- m = 0;
- suf = "";
-
- /*
- * Some boards use sockets so different CPUs can be used.
- * We have to check chip version in run time.
- */
- switch (k) {
- case 0x00020001: pre = 'P'; break;
- case 0x00030001: break;
- case 0x00120003: suf = "A"; break;
- case 0x00130003: suf = "A3"; break;
-
- case 0x00200004: suf = "B"; break;
-
- case 0x00300004: suf = "C"; break;
- case 0x00310004: suf = "C1"; m = 1; break;
-
- case 0x00200064: mid = "SR"; suf = "B"; break;
- case 0x00300065: mid = "SR"; suf = "C"; break;
- case 0x00310065: mid = "SR"; suf = "C1"; m = 1; break;
- case 0x05010000: suf = "D3"; m = 1; break;
- case 0x05020000: suf = "D4"; m = 1; break;
- /* this value is not documented anywhere */
- case 0x40000000: pre = 'P'; suf = "D"; m = 1; break;
- /* MPC866P/MPC866T/MPC859T/MPC859DSL/MPC852T */
- case 0x08010004: /* Rev. A.0 */
- suf = "A";
- /* fall through */
- case 0x08000003: /* Rev. 0.3 */
- pre = 'M'; m = 1;
- if (id_str == NULL)
- id_str =
-# if defined(CONFIG_MPC859T)
- "PC859T";
-# else
- "PC866x"; /* Unknown chip from MPC866 family */
-# endif
- break;
- case 0x09000000: pre = 'M'; mid = suf = ""; m = 1;
- if (id_str == NULL)
- id_str = "PC885"; /* 870/875/880/885 */
- break;
-
- default: suf = NULL; break;
- }
-
- if (id_str == NULL)
- id_str = "PC86x"; /* Unknown 86x chip */
- if (suf)
- printf ("%c%s%sZPnn%s", pre, id_str, mid, suf);
- else
- printf ("unknown M%s (0x%08x)", id_str, k);
-
-
-#if defined(CONFIG_SYS_8xx_CPUCLK_MIN) && defined(CONFIG_SYS_8xx_CPUCLK_MAX)
- printf (" at %s MHz [%d.%d...%d.%d MHz]\n ",
- strmhz (buf, clock),
- CONFIG_SYS_8xx_CPUCLK_MIN / 1000000,
- ((CONFIG_SYS_8xx_CPUCLK_MIN % 1000000) + 50000) / 100000,
- CONFIG_SYS_8xx_CPUCLK_MAX / 1000000,
- ((CONFIG_SYS_8xx_CPUCLK_MAX % 1000000) + 50000) / 100000
- );
-#else
- printf (" at %s MHz: ", strmhz (buf, clock));
-#endif
- print_size(checkicache(), " I-Cache ");
- print_size(checkdcache(), " D-Cache");
-
- /* do we have a FEC (860T/P or 852/859/866/885)? */
-
- immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
- if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
- printf (" FEC present");
- }
-
- if (!m) {
- puts (cpu_warning);
- }
-
- putc ('\n');
-
-#ifdef DEBUG
- if(clock != measure_gclk()) {
- printf ("clock %ldHz != %dHz\n", clock, measure_gclk());
- }
-#endif
-
- return 0;
-}
-
-#elif defined(CONFIG_MPC862)
-
-static int check_CPU (long clock, uint pvr, uint immr)
-{
- volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
- uint k, m;
- char buf[32];
- char pre = 'X';
- __maybe_unused char *mid = "xx";
- char *suf;
-
- /* the highest 16 bits should be 0x0050 for a 8xx */
-
- if ((pvr >> 16) != 0x0050)
- return -1;
-
- k = (immr << 16) |
- immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)];
- m = 0;
-
- switch (k) {
-
- /* this value is not documented anywhere */
- case 0x06000000: mid = "P"; suf = "0"; break;
- case 0x06010001: mid = "P"; suf = "A"; m = 1; break;
- case 0x07000003: mid = "P"; suf = "B"; m = 1; break;
- default: suf = NULL; break;
- }
-
-#ifndef CONFIG_MPC857
- if (suf)
- printf ("%cPC862%sZPnn%s", pre, mid, suf);
- else
- printf ("unknown MPC862 (0x%08x)", k);
-#else
- if (suf)
- printf ("%cPC857TZPnn%s", pre, suf); /* only 857T tested right now! */
- else
- printf ("unknown MPC857 (0x%08x)", k);
-#endif
-
- printf(" at %s MHz: ", strmhz(buf, clock));
-
- print_size(checkicache(), " I-Cache ");
- print_size(checkdcache(), " D-Cache");
-
- /* lets check and see if we're running on a 862T (or P?) */
-
- immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
- if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
- printf (" FEC present");
- }
-
- if (!m) {
- puts (cpu_warning);
- }
-
- putc ('\n');
-
- return 0;
-}
-
-#elif defined(CONFIG_MPC823)
-
-static int check_CPU (long clock, uint pvr, uint immr)
-{
- volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
- uint k, m;
- char buf[32];
- char *suf;
-
- /* the highest 16 bits should be 0x0050 for a 8xx */
-
- if ((pvr >> 16) != 0x0050)
- return -1;
-
- k = (immr << 16) |
- in_be16(&immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)]);
- m = 0;
-
- switch (k) {
- /* MPC823 */
- case 0x20000000: suf = "0"; break;
- case 0x20010000: suf = "0.1"; break;
- case 0x20020000: suf = "Z2/3"; break;
- case 0x20020001: suf = "Z3"; break;
- case 0x21000000: suf = "A"; break;
- case 0x21010000: suf = "B"; m = 1; break;
- case 0x21010001: suf = "B2"; m = 1; break;
- /* MPC823E */
- case 0x24010000: suf = NULL;
- puts ("PPC823EZTnnB2");
- m = 1;
- break;
- default:
- suf = NULL;
- printf ("unknown MPC823 (0x%08x)", k);
- break;
- }
- if (suf)
- printf ("PPC823ZTnn%s", suf);
-
- printf(" at %s MHz: ", strmhz(buf, clock));
-
- print_size(checkicache(), " I-Cache ");
- print_size(checkdcache(), " D-Cache");
-
- /* lets check and see if we're running on a 860T (or P?) */
-
- immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
- if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
- puts (" FEC present");
- }
-
- if (!m) {
- puts (cpu_warning);
- }
-
- putc ('\n');
-
- return 0;
-}
-
-#elif defined(CONFIG_MPC850)
-
-static int check_CPU (long clock, uint pvr, uint immr)
-{
- volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
- uint k, m;
- char buf[32];
-
- /* the highest 16 bits should be 0x0050 for a 8xx */
-
- if ((pvr >> 16) != 0x0050)
- return -1;
-
- k = (immr << 16) |
- immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)];
- m = 0;
-
- switch (k) {
- case 0x20020001:
- printf ("XPC850xxZT");
- break;
- case 0x21000065:
- printf ("XPC850xxZTA");
- break;
- case 0x21010067:
- printf ("XPC850xxZTB");
- m = 1;
- break;
- case 0x21020068:
- printf ("XPC850xxZTC");
- m = 1;
- break;
- default:
- printf ("unknown MPC850 (0x%08x)", k);
- }
- printf(" at %s MHz: ", strmhz(buf, clock));
-
- print_size(checkicache(), " I-Cache ");
- print_size(checkdcache(), " D-Cache");
-
- /* lets check and see if we're running on a 850T (or P?) */
-
- immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
- if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
- printf (" FEC present");
- }
-
- if (!m) {
- puts (cpu_warning);
- }
-
- putc ('\n');
-
- return 0;
-}
-#else
-#error CPU undefined
-#endif
-/* ------------------------------------------------------------------------- */
-
-int checkcpu (void)
-{
- ulong clock = gd->cpu_clk;
- uint immr = get_immr (0); /* Return full IMMR contents */
- uint pvr = get_pvr ();
-
- puts ("CPU: ");
-
- /* 850 has PARTNUM 20 */
- /* 801 has PARTNUM 10 */
- return check_CPU (clock, pvr, immr);
-}
-
-/* ------------------------------------------------------------------------- */
-/* L1 i-cache */
-/* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB) */
-/* the 860 P (plus) has 256 sets of 16 bytes in 4 ways (= 16 kB) */
-
-int checkicache (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- u32 cacheon = rd_ic_cst () & IDC_ENABLED;
-
-#ifdef CONFIG_IP86x
- u32 k = memctl->memc_br1 & ~0x00007fff; /* probe in flash memoryarea */
-#else
- u32 k = memctl->memc_br0 & ~0x00007fff; /* probe in flash memoryarea */
-#endif
- u32 m;
- u32 lines = -1;
-
- wr_ic_cst (IDC_UNALL);
- wr_ic_cst (IDC_INVALL);
- wr_ic_cst (IDC_DISABLE);
- __asm__ volatile ("isync");
-
- while (!((m = rd_ic_cst ()) & IDC_CERR2)) {
- wr_ic_adr (k);
- wr_ic_cst (IDC_LDLCK);
- __asm__ volatile ("isync");
-
- lines++;
- k += 0x10; /* the number of bytes in a cacheline */
- }
-
- wr_ic_cst (IDC_UNALL);
- wr_ic_cst (IDC_INVALL);
-
- if (cacheon)
- wr_ic_cst (IDC_ENABLE);
- else
- wr_ic_cst (IDC_DISABLE);
-
- __asm__ volatile ("isync");
-
- return lines << 4;
-};
-
-/* ------------------------------------------------------------------------- */
-/* L1 d-cache */
-/* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB) */
-/* the 860 P (plus) has 256 sets of 16 bytes in 2 ways (= 8 kB) */
-/* call with cache disabled */
-
-int checkdcache (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- u32 cacheon = rd_dc_cst () & IDC_ENABLED;
-
-#ifdef CONFIG_IP86x
- u32 k = memctl->memc_br1 & ~0x00007fff; /* probe in flash memoryarea */
-#else
- u32 k = memctl->memc_br0 & ~0x00007fff; /* probe in flash memoryarea */
-#endif
- u32 m;
- u32 lines = -1;
-
- wr_dc_cst (IDC_UNALL);
- wr_dc_cst (IDC_INVALL);
- wr_dc_cst (IDC_DISABLE);
-
- while (!((m = rd_dc_cst ()) & IDC_CERR2)) {
- wr_dc_adr (k);
- wr_dc_cst (IDC_LDLCK);
- lines++;
- k += 0x10; /* the number of bytes in a cacheline */
- }
-
- wr_dc_cst (IDC_UNALL);
- wr_dc_cst (IDC_INVALL);
-
- if (cacheon)
- wr_dc_cst (IDC_ENABLE);
- else
- wr_dc_cst (IDC_DISABLE);
-
- return lines << 4;
-};
-
-/* ------------------------------------------------------------------------- */
-
-void upmconfig (uint upm, uint * table, uint size)
-{
- uint i;
- uint addr = 0;
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- for (i = 0; i < size; i++) {
- memctl->memc_mdr = table[i]; /* (16-15) */
- memctl->memc_mcr = addr | upm; /* (16-16) */
- addr++;
- }
-}
-
-/* ------------------------------------------------------------------------- */
-
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- ulong msr, addr;
-
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- immap->im_clkrst.car_plprcr |= PLPRCR_CSR; /* Checkstop Reset enable */
-
- /* Interrupts and MMU off */
- __asm__ volatile ("mtspr 81, 0");
- __asm__ volatile ("mfmsr %0":"=r" (msr));
-
- msr &= ~0x1030;
- __asm__ volatile ("mtmsr %0"::"r" (msr));
-
- /*
- * Trying to execute the next instruction at a non-existing address
- * should cause a machine check, resulting in reset
- */
-#ifdef CONFIG_SYS_RESET_ADDRESS
- addr = CONFIG_SYS_RESET_ADDRESS;
-#else
- /*
- * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE
- * - sizeof (ulong) is usually a valid address. Better pick an address
- * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
- * "(ulong)-1" used to be a good choice for many systems...
- */
- addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
-#endif
- ((void (*)(void)) addr) ();
- return 1;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- *
- * See sections 14.2 and 14.6 of the User's Manual
- */
-unsigned long get_tbclk (void)
-{
- uint immr = get_immr (0); /* Return full IMMR contents */
- volatile immap_t *immap = (volatile immap_t *)(immr & 0xFFFF0000);
- ulong oscclk, factor, pll;
-
- if (immap->im_clkrst.car_sccr & SCCR_TBS) {
- return (gd->cpu_clk / 16);
- }
-
- pll = immap->im_clkrst.car_plprcr;
-
-#define PLPRCR_val(a) ((pll & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
-
- /*
- * For newer PQ1 chips (MPC866/87x/88x families), PLL multiplication
- * factor is calculated as follows:
- *
- * MFN
- * MFI + -------
- * MFD + 1
- * factor = -----------------
- * (PDF + 1) * 2^S
- *
- * For older chips, it's just MF field of PLPRCR plus one.
- */
- if ((immr & 0x0FFF) >= MPC8xx_NEW_CLK) { /* MPC866/87x/88x series */
- factor = (PLPRCR_val(MFI) + PLPRCR_val(MFN)/(PLPRCR_val(MFD)+1))/
- (PLPRCR_val(PDF)+1) / (1<<PLPRCR_val(S));
- } else {
- factor = PLPRCR_val(MF)+1;
- }
-
- oscclk = gd->cpu_clk / factor;
-
- if ((immap->im_clkrst.car_sccr & SCCR_RTSEL) == 0 || factor > 2) {
- return (oscclk / 4);
- }
- return (oscclk / 16);
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset (void)
-{
- int re_enable = disable_interrupts ();
-
- reset_8xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
- if (re_enable)
- enable_interrupts ();
-}
-#endif /* CONFIG_WATCHDOG */
-
-#if defined(CONFIG_WATCHDOG)
-
-void reset_8xx_watchdog (volatile immap_t * immr)
-{
- /*
- * All other boards use the MPC8xx Internal Watchdog
- */
- immr->im_siu_conf.sc_swsr = 0x556c; /* write magic1 */
- immr->im_siu_conf.sc_swsr = 0xaa39; /* write magic2 */
-}
-#endif /* CONFIG_WATCHDOG */
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(SCC_ENET) && defined(CONFIG_CMD_NET)
- scc_initialize(bis);
-#endif
-#if defined(FEC_ENET)
- fec_initialize(bis);
-#endif
- return 0;
-}
diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c
deleted file mode 100644
index f621d6285c..0000000000
--- a/arch/powerpc/cpu/mpc8xx/cpu_init.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <watchdog.h>
-
-#include <mpc8xx.h>
-#include <commproc.h>
-
-#if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS)
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
-#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
- defined(CONFIG_SYS_SMC_UCODE_PATCH)
-void cpm_load_patch (volatile immap_t * immr);
-#endif
-
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
-void cpu_init_f (volatile immap_t * immr)
-{
- volatile memctl8xx_t *memctl = &immr->im_memctl;
-# ifdef CONFIG_SYS_PLPRCR
- ulong mfmask;
-# endif
- ulong reg;
-
- /* SYPCR - contains watchdog control (11-9) */
-
- immr->im_siu_conf.sc_sypcr = CONFIG_SYS_SYPCR;
-
-#if defined(CONFIG_WATCHDOG)
- reset_8xx_watchdog (immr);
-#endif /* CONFIG_WATCHDOG */
-
- /* SIUMCR - contains debug pin configuration (11-6) */
- immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR;
- /* initialize timebase status and control register (11-26) */
- /* unlock TBSCRK */
-
- immr->im_sitk.sitk_tbscrk = KAPWR_KEY;
- immr->im_sit.sit_tbscr = CONFIG_SYS_TBSCR;
-
- /* initialize the PIT (11-31) */
-
- immr->im_sitk.sitk_piscrk = KAPWR_KEY;
- immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
-
- /* System integration timers. Don't change EBDF! (15-27) */
-
- immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
- reg = immr->im_clkrst.car_sccr;
- reg &= SCCR_MASK;
- reg |= CONFIG_SYS_SCCR;
- immr->im_clkrst.car_sccr = reg;
-
- /* PLL (CPU clock) settings (15-30) */
-
- immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
-
- /* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to
- * set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr,
- * otherwise OR in CONFIG_SYS_PLPRCR so we do not change the current MF
- * field value.
- *
- * For newer (starting MPC866) chips PLPRCR layout is different.
- */
-#ifdef CONFIG_SYS_PLPRCR
- if (get_immr(0xFFFF) >= MPC8xx_NEW_CLK)
- mfmask = PLPRCR_MFACT_MSK;
- else
- mfmask = PLPRCR_MF_MSK;
-
- if ((CONFIG_SYS_PLPRCR & mfmask) != 0)
- reg = CONFIG_SYS_PLPRCR; /* reset control bits */
- else {
- reg = immr->im_clkrst.car_plprcr;
- reg &= mfmask; /* isolate MF-related fields */
- reg |= CONFIG_SYS_PLPRCR; /* reset control bits */
- }
- immr->im_clkrst.car_plprcr = reg;
-#endif
-
- /*
- * Memory Controller:
- */
-
- /* perform BR0 reset that MPC850 Rev. A can't guarantee */
- reg = memctl->memc_br0;
- reg &= BR_PS_MSK; /* Clear everything except Port Size bits */
- reg |= BR_V; /* then add just the "Bank Valid" bit */
- memctl->memc_br0 = reg;
-
- /* Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at
- * preliminary addresses - these have to be modified later
- * when FLASH size has been determined
- *
- * Depending on the size of the memory region defined by
- * CONFIG_SYS_OR0_REMAP some boards (wide address mask) allow to map the
- * CONFIG_SYS_MONITOR_BASE, while others (narrower address mask) can't
- * map CONFIG_SYS_MONITOR_BASE.
- *
- * For example, for CONFIG_IVMS8, the CONFIG_SYS_MONITOR_BASE is
- * 0xff000000, but CONFIG_SYS_OR0_REMAP's address mask is 0xfff80000.
- *
- * If BR0 wasn't loaded with address base 0xff000000, then BR0's
- * base address remains as 0x00000000. However, the address mask
- * have been narrowed to 512Kb, so CONFIG_SYS_MONITOR_BASE wasn't mapped
- * into the Bank0.
- *
- * This is why CONFIG_IVMS8 and similar boards must load BR0 with
- * CONFIG_SYS_BR0_PRELIM in advance.
- *
- * [Thanks to Michael Liao for this explanation.
- * I owe him a free beer. - wd]
- */
-
-#if defined(CONFIG_SYS_OR0_REMAP)
- memctl->memc_or0 = CONFIG_SYS_OR0_REMAP;
-#endif
-#if defined(CONFIG_SYS_OR1_REMAP)
- memctl->memc_or1 = CONFIG_SYS_OR1_REMAP;
-#endif
-#if defined(CONFIG_SYS_OR5_REMAP)
- memctl->memc_or5 = CONFIG_SYS_OR5_REMAP;
-#endif
-
- /* now restrict to preliminary range */
- memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
- memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
-
-#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
- memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
- memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
- memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
- memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
- memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR4_PRELIM) && defined(CONFIG_SYS_BR4_PRELIM)
- memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
- memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR5_PRELIM) && defined(CONFIG_SYS_BR5_PRELIM)
- memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM;
- memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR6_PRELIM) && defined(CONFIG_SYS_BR6_PRELIM)
- memctl->memc_or6 = CONFIG_SYS_OR6_PRELIM;
- memctl->memc_br6 = CONFIG_SYS_BR6_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR7_PRELIM) && defined(CONFIG_SYS_BR7_PRELIM)
- memctl->memc_or7 = CONFIG_SYS_OR7_PRELIM;
- memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM;
-#endif
-
- /*
- * Reset CPM
- */
- immr->im_cpm.cp_cpcr = CPM_CR_RST | CPM_CR_FLG;
- do { /* Spin until command processed */
- __asm__ ("eieio");
- } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
-
-#ifdef CONFIG_SYS_RCCR /* must be done before cpm_load_patch() */
- /* write config value */
- immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR;
-#endif
-
-#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
- defined(CONFIG_SYS_SMC_UCODE_PATCH)
- cpm_load_patch (immr); /* load mpc8xx microcode patch */
-#endif
-}
-
-/*
- * initialize higher level parts of CPU like timers
- */
-int cpu_init_r (void)
-{
-#if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS)
- bd_t *bd = gd->bd;
- volatile immap_t *immr = (volatile immap_t *) (bd->bi_immr_base);
-#endif
-
-#ifdef CONFIG_SYS_RTCSC
- /* Unlock RTSC register */
- immr->im_sitk.sitk_rtcsck = KAPWR_KEY;
- /* write config value */
- immr->im_sit.sit_rtcsc = CONFIG_SYS_RTCSC;
-#endif
-
-#ifdef CONFIG_SYS_RMDS
- /* write config value */
- immr->im_cpm.cp_rmds = CONFIG_SYS_RMDS;
-#endif
- return (0);
-}
diff --git a/arch/powerpc/cpu/mpc8xx/fdt.c b/arch/powerpc/cpu/mpc8xx/fdt.c
deleted file mode 100644
index 34d36478d3..0000000000
--- a/arch/powerpc/cpu/mpc8xx/fdt.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright 2008 (C) Bryan O'Donoghue
- *
- * Code copied & edited from Freescale mpc85xx stuff.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "timebase-frequency", get_tbclk(), 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "clock-frequency", bd->bi_intfreq, 1);
- do_fixup_by_compat_u32(blob, "fsl,cpm-brg", "clock-frequency",
- gd->arch.brg_clk, 1);
-
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-}
diff --git a/arch/powerpc/cpu/mpc8xx/fec.c b/arch/powerpc/cpu/mpc8xx/fec.c
deleted file mode 100644
index b27310fffb..0000000000
--- a/arch/powerpc/cpu/mpc8xx/fec.c
+++ /dev/null
@@ -1,933 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <commproc.h>
-#include <malloc.h>
-#include <net.h>
-
-#include <phy.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#undef ET_DEBUG
-
-#if defined(CONFIG_CMD_NET) && \
- (defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2))
-
-/* compatibility test, if only FEC_ENET defined assume ETHER on FEC1 */
-#if defined(FEC_ENET) && !defined(CONFIG_ETHER_ON_FEC1) && !defined(CONFIG_ETHER_ON_FEC2)
-#define CONFIG_ETHER_ON_FEC1 1
-#endif
-
-/* define WANT_MII when MII support is required */
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_FEC1_PHY) || defined(CONFIG_FEC2_PHY)
-#define WANT_MII
-#else
-#undef WANT_MII
-#endif
-
-#if defined(WANT_MII)
-#include <miiphy.h>
-
-#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
-#error "CONFIG_MII has to be defined!"
-#endif
-
-#endif
-
-#if defined(CONFIG_RMII) && !defined(WANT_MII)
-#error RMII support is unusable without a working PHY.
-#endif
-
-#ifdef CONFIG_SYS_DISCOVER_PHY
-static int mii_discover_phy(struct eth_device *dev);
-#endif
-
-int fec8xx_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg);
-int fec8xx_miiphy_write(struct mii_dev *bus, int addr, int devad, int reg,
- u16 value);
-
-static struct ether_fcc_info_s
-{
- int ether_index;
- int fecp_offset;
- int phy_addr;
- int actual_phy_addr;
- int initialized;
-}
- ether_fcc_info[] = {
-#if defined(CONFIG_ETHER_ON_FEC1)
- {
- 0,
- offsetof(immap_t, im_cpm.cp_fec1),
-#if defined(CONFIG_FEC1_PHY)
- CONFIG_FEC1_PHY,
-#else
- -1, /* discover */
-#endif
- -1,
- 0,
-
- },
-#endif
-#if defined(CONFIG_ETHER_ON_FEC2)
- {
- 1,
- offsetof(immap_t, im_cpm.cp_fec2),
-#if defined(CONFIG_FEC2_PHY)
- CONFIG_FEC2_PHY,
-#else
- -1,
-#endif
- -1,
- 0,
- },
-#endif
-};
-
-/* Ethernet Transmit and Receive Buffers */
-#define DBUF_LENGTH 1520
-
-#define TX_BUF_CNT 2
-
-#define TOUT_LOOP 100
-
-#define PKT_MAXBUF_SIZE 1518
-#define PKT_MINBUF_SIZE 64
-#define PKT_MAXBLR_SIZE 1520
-
-#ifdef __GNUC__
-static char txbuf[DBUF_LENGTH] __attribute__ ((aligned(8)));
-#else
-#error txbuf must be aligned.
-#endif
-
-static uint rxIdx; /* index of the current RX buffer */
-static uint txIdx; /* index of the current TX buffer */
-
-/*
- * FEC Ethernet Tx and Rx buffer descriptors allocated at the
- * immr->udata_bd address on Dual-Port RAM
- * Provide for Double Buffering
- */
-
-typedef volatile struct CommonBufferDescriptor {
- cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
- cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
-} RTXBD;
-
-static RTXBD *rtx = NULL;
-
-static int fec_send(struct eth_device *dev, void *packet, int length);
-static int fec_recv(struct eth_device* dev);
-static int fec_init(struct eth_device* dev, bd_t * bd);
-static void fec_halt(struct eth_device* dev);
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-static void __mii_init(void);
-#endif
-
-int fec_initialize(bd_t *bis)
-{
- struct eth_device* dev;
- struct ether_fcc_info_s *efis;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(ether_fcc_info); i++) {
-
- dev = malloc(sizeof(*dev));
- if (dev == NULL)
- hang();
-
- memset(dev, 0, sizeof(*dev));
-
- /* for FEC1 make sure that the name of the interface is the same
- as the old one for compatibility reasons */
- if (i == 0) {
- strcpy(dev->name, "FEC");
- } else {
- sprintf (dev->name, "FEC%d",
- ether_fcc_info[i].ether_index + 1);
- }
-
- efis = &ether_fcc_info[i];
-
- /*
- * reset actual phy addr
- */
- efis->actual_phy_addr = -1;
-
- dev->priv = efis;
- dev->init = fec_init;
- dev->halt = fec_halt;
- dev->send = fec_send;
- dev->recv = fec_recv;
-
- eth_register(dev);
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
- int retval;
- struct mii_dev *mdiodev = mdio_alloc();
- if (!mdiodev)
- return -ENOMEM;
- strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
- mdiodev->read = fec8xx_miiphy_read;
- mdiodev->write = fec8xx_miiphy_write;
-
- retval = mdio_register(mdiodev);
- if (retval < 0)
- return retval;
-#endif
- }
- return 1;
-}
-
-static int fec_send(struct eth_device *dev, void *packet, int length)
-{
- int j, rc;
- struct ether_fcc_info_s *efis = dev->priv;
- volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
-
- /* section 16.9.23.3
- * Wait for ready
- */
- j = 0;
- while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
- udelay(1);
- j++;
- }
- if (j>=TOUT_LOOP) {
- printf("TX not ready\n");
- }
-
- rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
- rtx->txbd[txIdx].cbd_datlen = length;
- rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST;
- __asm__ ("eieio");
-
- /* Activate transmit Buffer Descriptor polling */
- fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */
-
- j = 0;
- while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
- udelay(1);
- j++;
- }
- if (j>=TOUT_LOOP) {
- printf("TX timeout\n");
- }
-#ifdef ET_DEBUG
- printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n",
- __FILE__,__LINE__,__FUNCTION__,j,rtx->txbd[txIdx].cbd_sc,
- (rtx->txbd[txIdx].cbd_sc & 0x003C)>>2);
-#endif
- /* return only status bits */;
- rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS);
-
- txIdx = (txIdx + 1) % TX_BUF_CNT;
-
- return rc;
-}
-
-static int fec_recv (struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- volatile fec_t *fecp =
- (volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset);
- int length;
-
- for (;;) {
- /* section 16.9.23.2 */
- if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
- length = -1;
- break; /* nothing received - leave for() loop */
- }
-
- length = rtx->rxbd[rxIdx].cbd_datlen;
-
- if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
-#ifdef ET_DEBUG
- printf ("%s[%d] err: %x\n",
- __FUNCTION__, __LINE__,
- rtx->rxbd[rxIdx].cbd_sc);
-#endif
- } else {
- uchar *rx = net_rx_packets[rxIdx];
-
- length -= 4;
-
-#if defined(CONFIG_CMD_CDP)
- if ((rx[0] & 1) != 0 &&
- memcmp((uchar *)rx, net_bcast_ethaddr, 6) != 0 &&
- !is_cdp_packet((uchar *)rx))
- rx = NULL;
-#endif
- /*
- * Pass the packet up to the protocol layers.
- */
- if (rx != NULL)
- net_process_received_packet(rx, length);
- }
-
- /* Give the buffer back to the FEC. */
- rtx->rxbd[rxIdx].cbd_datlen = 0;
-
- /* wrap around buffer index when necessary */
- if ((rxIdx + 1) >= PKTBUFSRX) {
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
- (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
- rxIdx = 0;
- } else {
- rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
- rxIdx++;
- }
-
- __asm__ ("eieio");
-
- /* Try to fill Buffer Descriptors */
- fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
- }
-
- return length;
-}
-
-/**************************************************************
- *
- * FEC Ethernet Initialization Routine
- *
- *************************************************************/
-
-#define FEC_ECNTRL_PINMUX 0x00000004
-#define FEC_ECNTRL_ETHER_EN 0x00000002
-#define FEC_ECNTRL_RESET 0x00000001
-
-#define FEC_RCNTRL_BC_REJ 0x00000010
-#define FEC_RCNTRL_PROM 0x00000008
-#define FEC_RCNTRL_MII_MODE 0x00000004
-#define FEC_RCNTRL_DRT 0x00000002
-#define FEC_RCNTRL_LOOP 0x00000001
-
-#define FEC_TCNTRL_FDEN 0x00000004
-#define FEC_TCNTRL_HBC 0x00000002
-#define FEC_TCNTRL_GTS 0x00000001
-
-#define FEC_RESET_DELAY 50
-
-#if defined(CONFIG_RMII)
-
-static inline void fec_10Mbps(struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- int fecidx = efis->ether_index;
- uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008;
-
- if ((unsigned int)fecidx >= 2)
- hang();
-
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_cptr |= mask;
-}
-
-static inline void fec_100Mbps(struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- int fecidx = efis->ether_index;
- uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008;
-
- if ((unsigned int)fecidx >= 2)
- hang();
-
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_cptr &= ~mask;
-}
-
-#endif
-
-static inline void fec_full_duplex(struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
-
- fecp->fec_r_cntrl &= ~FEC_RCNTRL_DRT;
- fecp->fec_x_cntrl |= FEC_TCNTRL_FDEN; /* FD enable */
-}
-
-static inline void fec_half_duplex(struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
-
- fecp->fec_r_cntrl |= FEC_RCNTRL_DRT;
- fecp->fec_x_cntrl &= ~FEC_TCNTRL_FDEN; /* FD disable */
-}
-
-static void fec_pin_init(int fecidx)
-{
- bd_t *bd = gd->bd;
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- /*
- * Set MII speed to 2.5 MHz or slightly below.
- *
- * According to the MPC860T (Rev. D) Fast ethernet controller user
- * manual (6.2.14),
- * the MII management interface clock must be less than or equal
- * to 2.5 MHz.
- * This MDC frequency is equal to system clock / (2 * MII_SPEED).
- * Then MII_SPEED = system_clock / 2 * 2,5 MHz.
- *
- * All MII configuration is done via FEC1 registers:
- */
- immr->im_cpm.cp_fec1.fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1;
-
-#if defined(CONFIG_MPC885_FAMILY) && defined(WANT_MII)
- /* use MDC for MII */
- immr->im_ioport.iop_pdpar |= 0x0080;
- immr->im_ioport.iop_pddir &= ~0x0080;
-#endif
-
- if (fecidx == 0) {
-#if defined(CONFIG_ETHER_ON_FEC1)
-
-#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
-
-#if !defined(CONFIG_RMII)
-
- immr->im_ioport.iop_papar |= 0xf830;
- immr->im_ioport.iop_padir |= 0x0830;
- immr->im_ioport.iop_padir &= ~0xf000;
-
- immr->im_cpm.cp_pbpar |= 0x00001001;
- immr->im_cpm.cp_pbdir &= ~0x00001001;
-
- immr->im_ioport.iop_pcpar |= 0x000c;
- immr->im_ioport.iop_pcdir &= ~0x000c;
-
- immr->im_cpm.cp_pepar |= 0x00000003;
- immr->im_cpm.cp_pedir |= 0x00000003;
- immr->im_cpm.cp_peso &= ~0x00000003;
-
- immr->im_cpm.cp_cptr &= ~0x00000100;
-
-#else
-
-#if !defined(CONFIG_FEC1_PHY_NORXERR)
- immr->im_ioport.iop_papar |= 0x1000;
- immr->im_ioport.iop_padir &= ~0x1000;
-#endif
- immr->im_ioport.iop_papar |= 0xe810;
- immr->im_ioport.iop_padir |= 0x0810;
- immr->im_ioport.iop_padir &= ~0xe000;
-
- immr->im_cpm.cp_pbpar |= 0x00000001;
- immr->im_cpm.cp_pbdir &= ~0x00000001;
-
- immr->im_cpm.cp_cptr |= 0x00000100;
- immr->im_cpm.cp_cptr &= ~0x00000050;
-
-#endif /* !CONFIG_RMII */
-
-#else
- /*
- * Configure all of port D for MII.
- */
- immr->im_ioport.iop_pdpar = 0x1fff;
-
- /*
- * Bits moved from Rev. D onward
- */
- if ((get_immr(0) & 0xffff) < 0x0501)
- immr->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */
- else
- immr->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */
-#endif
-
-#endif /* CONFIG_ETHER_ON_FEC1 */
- } else if (fecidx == 1) {
-
-#if defined(CONFIG_ETHER_ON_FEC2)
-
-#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
-
-#if !defined(CONFIG_RMII)
- immr->im_cpm.cp_pepar |= 0x0003fffc;
- immr->im_cpm.cp_pedir |= 0x0003fffc;
- immr->im_cpm.cp_peso &= ~0x000087fc;
- immr->im_cpm.cp_peso |= 0x00037800;
-
- immr->im_cpm.cp_cptr &= ~0x00000080;
-#else
-
-#if !defined(CONFIG_FEC2_PHY_NORXERR)
- immr->im_cpm.cp_pepar |= 0x00000010;
- immr->im_cpm.cp_pedir |= 0x00000010;
- immr->im_cpm.cp_peso &= ~0x00000010;
-#endif
- immr->im_cpm.cp_pepar |= 0x00039620;
- immr->im_cpm.cp_pedir |= 0x00039620;
- immr->im_cpm.cp_peso |= 0x00031000;
- immr->im_cpm.cp_peso &= ~0x00008620;
-
- immr->im_cpm.cp_cptr |= 0x00000080;
- immr->im_cpm.cp_cptr &= ~0x00000028;
-#endif /* CONFIG_RMII */
-
-#endif /* CONFIG_MPC885_FAMILY */
-
-#endif /* CONFIG_ETHER_ON_FEC2 */
-
- }
-}
-
-static int fec_reset(volatile fec_t *fecp)
-{
- int i;
-
- /* Whack a reset.
- * A delay is required between a reset of the FEC block and
- * initialization of other FEC registers because the reset takes
- * some time to complete. If you don't delay, subsequent writes
- * to FEC registers might get killed by the reset routine which is
- * still in progress.
- */
-
- fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
- for (i = 0;
- (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
- ++i) {
- udelay (1);
- }
- if (i == FEC_RESET_DELAY)
- return -1;
-
- return 0;
-}
-
-static int fec_init (struct eth_device *dev, bd_t * bd)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile fec_t *fecp =
- (volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset);
- int i;
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
- /* the MII interface is connected to FEC1
- * so for the miiphy_xxx function to work we must
- * call mii_init since fec_halt messes the thing up
- */
- if (efis->ether_index != 0)
- __mii_init();
-#endif
-
- if (fec_reset(fecp) < 0)
- printf ("FEC_RESET_DELAY timeout\n");
-
- /* We use strictly polling mode only
- */
- fecp->fec_imask = 0;
-
- /* Clear any pending interrupt
- */
- fecp->fec_ievent = 0xffc0;
-
- /* No need to set the IVEC register */
-
- /* Set station address
- */
-#define ea dev->enetaddr
- fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
- fecp->fec_addr_high = (ea[4] << 8) | (ea[5]);
-#undef ea
-
-#if defined(CONFIG_CMD_CDP)
- /*
- * Turn on multicast address hash table
- */
- fecp->fec_hash_table_high = 0xffffffff;
- fecp->fec_hash_table_low = 0xffffffff;
-#else
- /* Clear multicast address hash table
- */
- fecp->fec_hash_table_high = 0;
- fecp->fec_hash_table_low = 0;
-#endif
-
- /* Set maximum receive buffer size.
- */
- fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
-
- /* Set maximum frame length
- */
- fecp->fec_r_hash = PKT_MAXBUF_SIZE;
-
- /*
- * Setup Buffers and Buffer Desriptors
- */
- rxIdx = 0;
- txIdx = 0;
-
- if (!rtx)
- rtx = (RTXBD *)(immr->im_cpm.cp_dpmem + CPM_FEC_BASE);
- /*
- * Setup Receiver Buffer Descriptors (13.14.24.18)
- * Settings:
- * Empty, Wrap
- */
- for (i = 0; i < PKTBUFSRX; i++) {
- rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
- rtx->rxbd[i].cbd_datlen = 0; /* Reset */
- rtx->rxbd[i].cbd_bufaddr = (uint) net_rx_packets[i];
- }
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
-
- /*
- * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
- * Settings:
- * Last, Tx CRC
- */
- for (i = 0; i < TX_BUF_CNT; i++) {
- rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC;
- rtx->txbd[i].cbd_datlen = 0; /* Reset */
- rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
- }
- rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
-
- /* Set receive and transmit descriptor base
- */
- fecp->fec_r_des_start = (unsigned int) (&rtx->rxbd[0]);
- fecp->fec_x_des_start = (unsigned int) (&rtx->txbd[0]);
-
- /* Enable MII mode
- */
-#if 0 /* Full duplex mode */
- fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE;
- fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;
-#else /* Half duplex mode */
- fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
- fecp->fec_x_cntrl = 0;
-#endif
-
- /* Enable big endian and don't care about SDMA FC.
- */
- fecp->fec_fun_code = 0x78000000;
-
- /*
- * Setup the pin configuration of the FEC
- */
- fec_pin_init (efis->ether_index);
-
- rxIdx = 0;
- txIdx = 0;
-
- /*
- * Now enable the transmit and receive processing
- */
- fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
-
- if (efis->phy_addr == -1) {
-#ifdef CONFIG_SYS_DISCOVER_PHY
- /*
- * wait for the PHY to wake up after reset
- */
- efis->actual_phy_addr = mii_discover_phy (dev);
-
- if (efis->actual_phy_addr == -1) {
- printf ("Unable to discover phy!\n");
- return -1;
- }
-#else
- efis->actual_phy_addr = -1;
-#endif
- } else {
- efis->actual_phy_addr = efis->phy_addr;
- }
-
-#if defined(CONFIG_MII) && defined(CONFIG_RMII)
- /*
- * adapt the RMII speed to the speed of the phy
- */
- if (miiphy_speed (dev->name, efis->actual_phy_addr) == _100BASET) {
- fec_100Mbps (dev);
- } else {
- fec_10Mbps (dev);
- }
-#endif
-
-#if defined(CONFIG_MII)
- /*
- * adapt to the half/full speed settings
- */
- if (miiphy_duplex (dev->name, efis->actual_phy_addr) == FULL) {
- fec_full_duplex (dev);
- } else {
- fec_half_duplex (dev);
- }
-#endif
-
- /* And last, try to fill Rx Buffer Descriptors */
- fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
-
- efis->initialized = 1;
-
- return 0;
-}
-
-
-static void fec_halt(struct eth_device* dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
- int i;
-
- /* avoid halt if initialized; mii gets stuck otherwise */
- if (!efis->initialized)
- return;
-
- /* Whack a reset.
- * A delay is required between a reset of the FEC block and
- * initialization of other FEC registers because the reset takes
- * some time to complete. If you don't delay, subsequent writes
- * to FEC registers might get killed by the reset routine which is
- * still in progress.
- */
-
- fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
- for (i = 0;
- (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
- ++i) {
- udelay (1);
- }
- if (i == FEC_RESET_DELAY) {
- printf ("FEC_RESET_DELAY timeout\n");
- return;
- }
-
- efis->initialized = 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-
-/* Make MII read/write commands for the FEC.
-*/
-
-#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \
- (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \
- (REG & 0x1f) << 18) | \
- (VAL & 0xffff))
-
-/* Interrupt events/masks.
-*/
-#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */
-#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */
-#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */
-#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */
-#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */
-#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */
-#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */
-#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */
-#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */
-#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */
-
-/* PHY identification
- */
-#define PHY_ID_LXT970 0x78100000 /* LXT970 */
-#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */
-#define PHY_ID_82555 0x02a80150 /* Intel 82555 */
-#define PHY_ID_QS6612 0x01814400 /* QS6612 */
-#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
-#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
-#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
-#define PHY_ID_DM9161 0x0181B880 /* Davicom DM9161 */
-#define PHY_ID_KSM8995M 0x00221450 /* MICREL KS8995MA */
-
-/* send command to phy using mii, wait for result */
-static uint
-mii_send(uint mii_cmd)
-{
- uint mii_reply;
- volatile fec_t *ep;
- int cnt;
-
- ep = &(((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_fec);
-
- ep->fec_mii_data = mii_cmd; /* command to phy */
-
- /* wait for mii complete */
- cnt = 0;
- while (!(ep->fec_ievent & FEC_ENET_MII)) {
- if (++cnt > 1000) {
- printf("mii_send STUCK!\n");
- break;
- }
- }
- mii_reply = ep->fec_mii_data; /* result from phy */
- ep->fec_ievent = FEC_ENET_MII; /* clear MII complete */
-#if 0
- printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
- __FILE__,__LINE__,__FUNCTION__,mii_cmd,mii_reply);
-#endif
- return (mii_reply & 0xffff); /* data read from phy */
-}
-#endif
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-static int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
- uint phyno;
- int pass;
- uint phytype;
- int phyaddr;
-
- phyaddr = -1; /* didn't find a PHY yet */
- for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
- if (pass > 1) {
- /* PHY may need more time to recover from reset.
- * The LXT970 needs 50ms typical, no maximum is
- * specified, so wait 10ms before try again.
- * With 11 passes this gives it 100ms to wake up.
- */
- udelay(10000); /* wait 10ms */
- }
- for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
- phytype = mii_send(mk_mii_read(phyno, MII_PHYSID2));
-#ifdef ET_DEBUG
- printf("PHY type 0x%x pass %d type ", phytype, pass);
-#endif
- if (phytype != 0xffff) {
- phyaddr = phyno;
- phytype |= mii_send(mk_mii_read(phyno,
- MII_PHYSID1)) << 16;
-
-#ifdef ET_DEBUG
- printf("PHY @ 0x%x pass %d type ",phyno,pass);
- switch (phytype & 0xfffffff0) {
- case PHY_ID_LXT970:
- printf("LXT970\n");
- break;
- case PHY_ID_LXT971:
- printf("LXT971\n");
- break;
- case PHY_ID_82555:
- printf("82555\n");
- break;
- case PHY_ID_QS6612:
- printf("QS6612\n");
- break;
- case PHY_ID_AMD79C784:
- printf("AMD79C784\n");
- break;
- case PHY_ID_LSI80225B:
- printf("LSI L80225/B\n");
- break;
- case PHY_ID_DM9161:
- printf("Davicom DM9161\n");
- break;
- case PHY_ID_KSM8995M:
- printf("MICREL KS8995M\n");
- break;
- default:
- printf("0x%08x\n", phytype);
- break;
- }
-#endif
- }
- }
- }
- if (phyaddr < 0) {
- printf("No PHY device found.\n");
- }
- return phyaddr;
-}
-#endif /* CONFIG_SYS_DISCOVER_PHY */
-
-#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && !defined(CONFIG_BITBANGMII)
-
-/****************************************************************************
- * mii_init -- Initialize the MII via FEC 1 for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-static void __mii_init(void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
-
- if (fec_reset(fecp) < 0)
- printf ("FEC_RESET_DELAY timeout\n");
-
- /* We use strictly polling mode only
- */
- fecp->fec_imask = 0;
-
- /* Clear any pending interrupt
- */
- fecp->fec_ievent = 0xffc0;
-
- /* Now enable the transmit and receive processing
- */
- fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
-}
-
-void mii_init (void)
-{
- int i;
-
- __mii_init();
-
- /* Setup the pin configuration of the FEC(s)
- */
- for (i = 0; i < ARRAY_SIZE(ether_fcc_info); i++)
- fec_pin_init(ether_fcc_info[i].ether_index);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- * does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- * no PHY connected...
- * For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- * Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int fec8xx_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg)
-{
- unsigned short value = 0;
- short rdreg; /* register working value */
-
-#ifdef MII_DEBUG
- printf ("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
- rdreg = mii_send(mk_mii_read(addr, reg));
-
- value = rdreg;
-#ifdef MII_DEBUG
- printf ("0x%04x\n", value);
-#endif
- return value;
-}
-
-int fec8xx_miiphy_write(struct mii_dev *bus, int addr, int devad, int reg,
- u16 value)
-{
-#ifdef MII_DEBUG
- printf ("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
- (void)mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
- printf ("0x%04x\n", value);
-#endif
- return 0;
-}
-#endif
-
-#endif
diff --git a/arch/powerpc/cpu/mpc8xx/fec.h b/arch/powerpc/cpu/mpc8xx/fec.h
deleted file mode 100644
index e025c3f464..0000000000
--- a/arch/powerpc/cpu/mpc8xx/fec.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _FEC_H_
-#define _FEC_H_
-
-
-#endif /* _FEC_H_ */
diff --git a/arch/powerpc/cpu/mpc8xx/interrupts.c b/arch/powerpc/cpu/mpc8xx/interrupts.c
deleted file mode 100644
index 482ceecb9f..0000000000
--- a/arch/powerpc/cpu/mpc8xx/interrupts.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <mpc8xx_irq.h>
-#include <asm/processor.h>
-#include <commproc.h>
-
-/************************************************************************/
-
-/*
- * CPM interrupt vector functions.
- */
-struct interrupt_action {
- interrupt_handler_t *handler;
- void *arg;
-};
-
-static struct interrupt_action cpm_vecs[CPMVEC_NR];
-static struct interrupt_action irq_vecs[NR_IRQS];
-
-static void cpm_interrupt_init (void);
-static void cpm_interrupt (void *regs);
-
-/************************************************************************/
-
-int interrupt_init_cpu (unsigned *decrementer_count)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- *decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
-
- /* disable all interrupts */
- immr->im_siu_conf.sc_simask = 0;
-
- /* Configure CPM interrupts */
- cpm_interrupt_init ();
-
- return (0);
-}
-
-/************************************************************************/
-
-/*
- * Handle external interrupts
- */
-void external_interrupt (struct pt_regs *regs)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- int irq;
- ulong simask, newmask;
- ulong vec, v_bit;
-
- /*
- * read the SIVEC register and shift the bits down
- * to get the irq number
- */
- vec = immr->im_siu_conf.sc_sivec;
- irq = vec >> 26;
- v_bit = 0x80000000UL >> irq;
-
- /*
- * Read Interrupt Mask Register and Mask Interrupts
- */
- simask = immr->im_siu_conf.sc_simask;
- newmask = simask & (~(0xFFFF0000 >> irq));
- immr->im_siu_conf.sc_simask = newmask;
-
- if (!(irq & 0x1)) { /* External Interrupt ? */
- ulong siel;
-
- /*
- * Read Interrupt Edge/Level Register
- */
- siel = immr->im_siu_conf.sc_siel;
-
- if (siel & v_bit) { /* edge triggered interrupt ? */
- /*
- * Rewrite SIPEND Register to clear interrupt
- */
- immr->im_siu_conf.sc_sipend = v_bit;
- }
- }
-
- if (irq_vecs[irq].handler != NULL) {
- irq_vecs[irq].handler (irq_vecs[irq].arg);
- } else {
- printf ("\nBogus External Interrupt IRQ %d Vector %ld\n",
- irq, vec);
- /* turn off the bogus interrupt to avoid it from now */
- simask &= ~v_bit;
- }
- /*
- * Re-Enable old Interrupt Mask
- */
- immr->im_siu_conf.sc_simask = simask;
-}
-
-/************************************************************************/
-
-/*
- * CPM interrupt handler
- */
-static void cpm_interrupt (void *regs)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- uint vec;
-
- /*
- * Get the vector by setting the ACK bit
- * and then reading the register.
- */
- immr->im_cpic.cpic_civr = 1;
- vec = immr->im_cpic.cpic_civr;
- vec >>= 11;
-
- if (cpm_vecs[vec].handler != NULL) {
- (*cpm_vecs[vec].handler) (cpm_vecs[vec].arg);
- } else {
- immr->im_cpic.cpic_cimr &= ~(1 << vec);
- printf ("Masking bogus CPM interrupt vector 0x%x\n", vec);
- }
- /*
- * After servicing the interrupt,
- * we have to remove the status indicator.
- */
- immr->im_cpic.cpic_cisr |= (1 << vec);
-}
-
-/*
- * The CPM can generate the error interrupt when there is a race
- * condition between generating and masking interrupts. All we have
- * to do is ACK it and return. This is a no-op function so we don't
- * need any special tests in the interrupt handler.
- */
-static void cpm_error_interrupt (void *dummy)
-{
-}
-
-/************************************************************************/
-/*
- * Install and free an interrupt handler
- */
-void irq_install_handler (int vec, interrupt_handler_t * handler,
- void *arg)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- if ((vec & CPMVEC_OFFSET) != 0) {
- /* CPM interrupt */
- vec &= 0xffff;
- if (cpm_vecs[vec].handler != NULL) {
- printf ("CPM interrupt 0x%x replacing 0x%x\n",
- (uint) handler,
- (uint) cpm_vecs[vec].handler);
- }
- cpm_vecs[vec].handler = handler;
- cpm_vecs[vec].arg = arg;
- immr->im_cpic.cpic_cimr |= (1 << vec);
-#if 0
- printf ("Install CPM interrupt for vector %d ==> %p\n",
- vec, handler);
-#endif
- } else {
- /* SIU interrupt */
- if (irq_vecs[vec].handler != NULL) {
- printf ("SIU interrupt %d 0x%x replacing 0x%x\n",
- vec,
- (uint) handler,
- (uint) cpm_vecs[vec].handler);
- }
- irq_vecs[vec].handler = handler;
- irq_vecs[vec].arg = arg;
- immr->im_siu_conf.sc_simask |= 1 << (31 - vec);
-#if 0
- printf ("Install SIU interrupt for vector %d ==> %p\n",
- vec, handler);
-#endif
- }
-}
-
-void irq_free_handler (int vec)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- if ((vec & CPMVEC_OFFSET) != 0) {
- /* CPM interrupt */
- vec &= 0xffff;
-#if 0
- printf ("Free CPM interrupt for vector %d ==> %p\n",
- vec, cpm_vecs[vec].handler);
-#endif
- immr->im_cpic.cpic_cimr &= ~(1 << vec);
- cpm_vecs[vec].handler = NULL;
- cpm_vecs[vec].arg = NULL;
- } else {
- /* SIU interrupt */
-#if 0
- printf ("Free CPM interrupt for vector %d ==> %p\n",
- vec, cpm_vecs[vec].handler);
-#endif
- immr->im_siu_conf.sc_simask &= ~(1 << (31 - vec));
- irq_vecs[vec].handler = NULL;
- irq_vecs[vec].arg = NULL;
- }
-}
-
-/************************************************************************/
-
-static void cpm_interrupt_init (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- /*
- * Initialize the CPM interrupt controller.
- */
-
- immr->im_cpic.cpic_cicr =
- (CICR_SCD_SCC4 |
- CICR_SCC_SCC3 |
- CICR_SCB_SCC2 |
- CICR_SCA_SCC1) | ((CPM_INTERRUPT / 2) << 13) | CICR_HP_MASK;
-
- immr->im_cpic.cpic_cimr = 0;
-
- /*
- * Install the error handler.
- */
- irq_install_handler (CPMVEC_ERROR, cpm_error_interrupt, NULL);
-
- immr->im_cpic.cpic_cicr |= CICR_IEN;
-
- /*
- * Install the cpm interrupt handler
- */
- irq_install_handler (CPM_INTERRUPT, cpm_interrupt, NULL);
-}
-
-/************************************************************************/
-
-/*
- * timer_interrupt - gets called when the decrementer overflows,
- * with interrupts disabled.
- * Trivial implementation - no need to be really accurate.
- */
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-#if 0
- printf ("*** Timer Interrupt *** ");
-#endif
- /* Reset Timer Expired and Timers Interrupt Status */
- immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
- __asm__ ("nop");
- /*
- Clear TEXPS (and TMIST on older chips). SPLSS (on older
- chips) is cleared too.
-
- Bitwise OR is a read-modify-write operation so ALL bits
- which are cleared by writing `1' would be cleared by
- operations like
-
- immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS;
-
- The same can be achieved by simple writing of the PLPRCR
- to itself. If a bit value should be preserved, read the
- register, ZERO the bit and write, not OR, the result back.
- */
- immr->im_clkrst.car_plprcr = immr->im_clkrst.car_plprcr;
-}
-
-/************************************************************************/
diff --git a/arch/powerpc/cpu/mpc8xx/kgdb.S b/arch/powerpc/cpu/mpc8xx/kgdb.S
deleted file mode 100644
index 0ea1a06c7a..0000000000
--- a/arch/powerpc/cpu/mpc8xx/kgdb.S
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (C) 2000 Murray Jensen <Murray.Jensen@cmst.csiro.au>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <command.h>
-#include <mpc8xx.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#if defined(CONFIG_CMD_KGDB)
-
- /*
- * cache flushing routines for kgdb
- */
-
- .globl kgdb_flush_cache_all
-kgdb_flush_cache_all:
- lis r3, IDC_INVALL@h
- mtspr DC_CST, r3
- sync
- lis r3, IDC_INVALL@h
- mtspr IC_CST, r3
- SYNC
- blr
-
- .globl kgdb_flush_cache_range
-kgdb_flush_cache_range:
- li r5,CONFIG_SYS_CACHELINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,CONFIG_SYS_CACHELINE_SHIFT
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,CONFIG_SYS_CACHELINE_SIZE
- bdnz 2b
- SYNC
- blr
-
-#endif
diff --git a/arch/powerpc/cpu/mpc8xx/plprcr_write.S b/arch/powerpc/cpu/mpc8xx/plprcr_write.S
deleted file mode 100644
index e28292f5e2..0000000000
--- a/arch/powerpc/cpu/mpc8xx/plprcr_write.S
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <mpc8xx.h>
-#include <ppc_asm.tmpl>
-#include <asm/cache.h>
-
-#define CACHE_CMD_ENABLE 0x02000000
-#define CACHE_CMD_DISABLE 0x04000000
-#define CACHE_CMD_LOAD_LOCK 0x06000000
-#define CACHE_CMD_UNLOCK_LINE 0x08000000
-#define CACHE_CMD_UNLOCK_ALL 0x0A000000
-#define CACHE_CMD_INVALIDATE 0x0C000000
-#define SPEED_PLPRCR_WAIT_5CYC 150
-#define _CACHE_ALIGN_SIZE 16
-
-
- .text
- .align 2
- .globl plprcr_write_866
-
-/*
- * void plprcr_write_866 (long plprcr)
- * Write PLPRCR, including workaround for device errata SIU4 and SIU9.
- */
-
-plprcr_write_866:
- mfspr r10, LR /* save the Link Register value */
-
- /* turn instruction cache on (no MMU required for instructions)
- */
- lis r4, CACHE_CMD_ENABLE@h
- ori r4, r4, CACHE_CMD_ENABLE@l
- mtspr IC_CST, r4
- isync
-
- /* clear IC_CST error bits
- */
- mfspr r4, IC_CST
-
- bl plprcr_here
-
-plprcr_here:
- mflr r5
-
- /* calculate relocation offset
- */
- lis r4, plprcr_here@h
- ori r4, r4, plprcr_here@l
- sub r5, r5, r4
-
- /* calculate first address of this function
- */
- lis r6, plprcr_write_866@h
- ori r6, r6, plprcr_write_866@l
- add r6, r6, r5
-
- /* calculate end address of this function
- */
- lis r7, plprcr_end@h
- ori r7, r7, plprcr_end@l
- add r7, r7, r5
-
- /* load and lock code addresses
- */
- mr r5, r6
-
-plprcr_loop:
- mtspr IC_ADR, r5
- addi r5, r5, _CACHE_ALIGN_SIZE /* increment by one line */
-
- lis r4, CACHE_CMD_LOAD_LOCK@h
- ori r4, r4, CACHE_CMD_LOAD_LOCK@l
- mtspr IC_CST, r4
- isync
-
- cmpw r5, r7
- blt plprcr_loop
-
- /* IC_CST error bits not evaluated
- */
-
- /* switch PLPRCR
- */
- mfspr r4, IMMR /* read IMMR */
- rlwinm r4, r4, 0, 0, 15 /* only high 16 bits count */
-
- /* write sequence according to MPC866 Errata
- */
- stw r3, PLPRCR(r4)
- isync
-
- lis r3, SPEED_PLPRCR_WAIT_5CYC@h
- ori r3, r3, SPEED_PLPRCR_WAIT_5CYC@l
-
-plprcr_wait:
- cmpwi r3, 0
- beq plprcr_wait_end
- nop
- subi r3, r3, 1
- b plprcr_wait
-
-plprcr_wait_end:
-
- /* unlock instruction cache but leave it enabled
- */
- lis r4, CACHE_CMD_UNLOCK_ALL@h
- ori r4, r4, CACHE_CMD_UNLOCK_ALL@l
- mtspr IC_CST, r4
- isync
-
- mtspr LR, r10 /* restore original Link Register value */
- blr
-
-plprcr_end:
diff --git a/arch/powerpc/cpu/mpc8xx/scc.c b/arch/powerpc/cpu/mpc8xx/scc.c
deleted file mode 100644
index 17bcc2fe0a..0000000000
--- a/arch/powerpc/cpu/mpc8xx/scc.c
+++ /dev/null
@@ -1,472 +0,0 @@
-/*
- * File: scc.c
- * Description:
- * Basic ET HW initialization and packet RX/TX routines
- *
- * NOTE <<<IMPORTANT: PLEASE READ>>>:
- * Do not cache Rx/Tx buffers!
- */
-
-/*
- * MPC823 <-> MC68160 Connections:
- *
- * Setup MPC823 to work with MC68160 Enhanced Ethernet
- * Serial Tranceiver as follows:
- *
- * MPC823 Signal MC68160 Comments
- * ------ ------ ------- --------
- * PA-12 ETHTX --------> TX Eth. Port Transmit Data
- * PB-18 E_TENA --------> TENA Eth. Transmit Port Enable
- * PA-5 ETHTCK <-------- TCLK Eth. Port Transmit Clock
- * PA-13 ETHRX <-------- RX Eth. Port Receive Data
- * PC-8 E_RENA <-------- RENA Eth. Receive Enable
- * PA-6 ETHRCK <-------- RCLK Eth. Port Receive Clock
- * PC-9 E_CLSN <-------- CLSN Eth. Port Collision Indication
- *
- * FADS Board Signal MC68160 Comments
- * ----------------- ------- --------
- * (BCSR1) ETHEN* --------> CS2 Eth. Port Enable
- * (BSCR4) TPSQEL* --------> TPSQEL Twisted Pair Signal Quality Error Test Enable
- * (BCSR4) TPFLDL* --------> TPFLDL Twisted Pair Full-Duplex
- * (BCSR4) ETHLOOP --------> LOOP Eth. Port Diagnostic Loop-Back
- *
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <commproc.h>
-#include <net.h>
-#include <command.h>
-
-#if defined(CONFIG_CMD_NET) && defined(SCC_ENET)
-
-/* Ethernet Transmit and Receive Buffers */
-#define DBUF_LENGTH 1520
-
-#define TX_BUF_CNT 2
-
-#define TOUT_LOOP 10000 /* 10 ms to have a packet sent */
-
-static char txbuf[DBUF_LENGTH];
-
-static uint rxIdx; /* index of the current RX buffer */
-static uint txIdx; /* index of the current TX buffer */
-
-/*
- * SCC Ethernet Tx and Rx buffer descriptors allocated at the
- * immr->udata_bd address on Dual-Port RAM
- * Provide for Double Buffering
- */
-
-typedef volatile struct CommonBufferDescriptor {
- cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
- cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
-} RTXBD;
-
-static RTXBD *rtx;
-
-static int scc_send(struct eth_device *dev, void *packet, int length);
-static int scc_recv(struct eth_device* dev);
-static int scc_init (struct eth_device* dev, bd_t * bd);
-static void scc_halt(struct eth_device* dev);
-
-int scc_initialize(bd_t *bis)
-{
- struct eth_device* dev;
-
- dev = (struct eth_device*) malloc(sizeof *dev);
- memset(dev, 0, sizeof *dev);
-
- strcpy(dev->name, "SCC");
- dev->iobase = 0;
- dev->priv = 0;
- dev->init = scc_init;
- dev->halt = scc_halt;
- dev->send = scc_send;
- dev->recv = scc_recv;
-
- eth_register(dev);
-
- return 1;
-}
-
-static int scc_send(struct eth_device *dev, void *packet, int length)
-{
- int i, j=0;
-#if 0
- volatile char *in, *out;
-#endif
-
- /* section 16.9.23.3
- * Wait for ready
- */
-#if 0
- while (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY);
- out = (char *)(rtx->txbd[txIdx].cbd_bufaddr);
- in = packet;
- for(i = 0; i < length; i++) {
- *out++ = *in++;
- }
- rtx->txbd[txIdx].cbd_datlen = length;
- rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST);
- while (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) j++;
-
-#ifdef ET_DEBUG
- printf("cycles: %d status: %x\n", j, rtx->txbd[txIdx].cbd_sc);
-#endif
- i = (rtx->txbd[txIdx++].cbd_sc & BD_ENET_TX_STATS) /* return only status bits */;
-
- /* wrap around buffer index when necessary */
- if (txIdx >= TX_BUF_CNT) txIdx = 0;
-#endif
-
- while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
- udelay (1); /* will also trigger Wd if needed */
- j++;
- }
- if (j>=TOUT_LOOP) printf("TX not ready\n");
- rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
- rtx->txbd[txIdx].cbd_datlen = length;
- rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST |BD_ENET_TX_WRAP);
- while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
- udelay (1); /* will also trigger Wd if needed */
- j++;
- }
- if (j>=TOUT_LOOP) printf("TX timeout\n");
-#ifdef ET_DEBUG
- printf("cycles: %d status: %x\n", j, rtx->txbd[txIdx].cbd_sc);
-#endif
- i = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS) /* return only status bits */;
- return i;
-}
-
-static int scc_recv (struct eth_device *dev)
-{
- int length;
-
- for (;;) {
- /* section 16.9.23.2 */
- if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
- length = -1;
- break; /* nothing received - leave for() loop */
- }
-
- length = rtx->rxbd[rxIdx].cbd_datlen;
-
- if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
-#ifdef ET_DEBUG
- printf ("err: %x\n", rtx->rxbd[rxIdx].cbd_sc);
-#endif
- } else {
- /* Pass the packet up to the protocol layers. */
- net_process_received_packet(net_rx_packets[rxIdx],
- length - 4);
- }
-
-
- /* Give the buffer back to the SCC. */
- rtx->rxbd[rxIdx].cbd_datlen = 0;
-
- /* wrap around buffer index when necessary */
- if ((rxIdx + 1) >= PKTBUFSRX) {
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
- (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
- rxIdx = 0;
- } else {
- rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
- rxIdx++;
- }
- }
- return length;
-}
-
-/**************************************************************
- *
- * SCC Ethernet Initialization Routine
- *
- *************************************************************/
-
-static int scc_init (struct eth_device *dev, bd_t * bis)
-{
-
- int i;
- scc_enet_t *pram_ptr;
-
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- pram_ptr = (scc_enet_t *) & (immr->im_cpm.cp_dparam[PROFF_ENET]);
-
- rxIdx = 0;
- txIdx = 0;
-
- if (!rtx)
- rtx = (RTXBD *)(immr->im_cpm.cp_dpmem + CPM_SCC_BASE);
-
-#if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD))
- /* Configure port A pins for Txd and Rxd.
- */
- immr->im_ioport.iop_papar |= (PA_ENET_RXD | PA_ENET_TXD);
- immr->im_ioport.iop_padir &= ~(PA_ENET_RXD | PA_ENET_TXD);
- immr->im_ioport.iop_paodr &= ~PA_ENET_TXD;
-#elif (defined(PB_ENET_RXD) && defined(PB_ENET_TXD))
- /* Configure port B pins for Txd and Rxd.
- */
- immr->im_cpm.cp_pbpar |= (PB_ENET_RXD | PB_ENET_TXD);
- immr->im_cpm.cp_pbdir &= ~(PB_ENET_RXD | PB_ENET_TXD);
- immr->im_cpm.cp_pbodr &= ~PB_ENET_TXD;
-#else
-#error Configuration Error: exactly ONE of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined
-#endif
-
-#if defined(PC_ENET_LBK)
- /* Configure port C pins to disable External Loopback
- */
- immr->im_ioport.iop_pcpar &= ~PC_ENET_LBK;
- immr->im_ioport.iop_pcdir |= PC_ENET_LBK;
- immr->im_ioport.iop_pcso &= ~PC_ENET_LBK;
- immr->im_ioport.iop_pcdat &= ~PC_ENET_LBK; /* Disable Loopback */
-#endif /* PC_ENET_LBK */
-
- /* Configure port C pins to enable CLSN and RENA.
- */
- immr->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
- immr->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
- immr->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA);
-
- /* Configure port A for TCLK and RCLK.
- */
- immr->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK);
- immr->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
-
- /*
- * Configure Serial Interface clock routing -- see section 16.7.5.3
- * First, clear all SCC bits to zero, then set the ones we want.
- */
-
- immr->im_cpm.cp_sicr &= ~SICR_ENET_MASK;
- immr->im_cpm.cp_sicr |= SICR_ENET_CLKRT;
-
-
- /*
- * Initialize SDCR -- see section 16.9.23.7
- * SDMA configuration register
- */
- immr->im_siu_conf.sc_sdcr = 0x01;
-
-
- /*
- * Setup SCC Ethernet Parameter RAM
- */
-
- pram_ptr->sen_genscc.scc_rfcr = 0x18; /* Normal Operation and Mot byte ordering */
- pram_ptr->sen_genscc.scc_tfcr = 0x18; /* Mot byte ordering, Normal access */
-
- pram_ptr->sen_genscc.scc_mrblr = DBUF_LENGTH; /* max. ET package len 1520 */
-
- pram_ptr->sen_genscc.scc_rbase = (unsigned int) (&rtx->rxbd[0]); /* Set RXBD tbl start at Dual Port */
- pram_ptr->sen_genscc.scc_tbase = (unsigned int) (&rtx->txbd[0]); /* Set TXBD tbl start at Dual Port */
-
- /*
- * Setup Receiver Buffer Descriptors (13.14.24.18)
- * Settings:
- * Empty, Wrap
- */
-
- for (i = 0; i < PKTBUFSRX; i++) {
- rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
- rtx->rxbd[i].cbd_datlen = 0; /* Reset */
- rtx->rxbd[i].cbd_bufaddr = (uint) net_rx_packets[i];
- }
-
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
-
- /*
- * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
- * Settings:
- * Add PADs to Short FRAMES, Wrap, Last, Tx CRC
- */
-
- for (i = 0; i < TX_BUF_CNT; i++) {
- rtx->txbd[i].cbd_sc =
- (BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC);
- rtx->txbd[i].cbd_datlen = 0; /* Reset */
- rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
- }
-
- rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
-
- /*
- * Enter Command: Initialize Rx Params for SCC
- */
-
- do { /* Spin until ready to issue command */
- __asm__ ("eieio");
- } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
- /* Issue command */
- immr->im_cpm.cp_cpcr =
- ((CPM_CR_INIT_RX << 8) | (CPM_CR_ENET << 4) | CPM_CR_FLG);
- do { /* Spin until command processed */
- __asm__ ("eieio");
- } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
-
- /*
- * Ethernet Specific Parameter RAM
- * see table 13-16, pg. 660,
- * pg. 681 (example with suggested settings)
- */
-
- pram_ptr->sen_cpres = ~(0x0); /* Preset CRC */
- pram_ptr->sen_cmask = 0xdebb20e3; /* Constant Mask for CRC */
- pram_ptr->sen_crcec = 0x0; /* Error Counter CRC (unused) */
- pram_ptr->sen_alec = 0x0; /* Alignment Error Counter (unused) */
- pram_ptr->sen_disfc = 0x0; /* Discard Frame Counter (unused) */
- pram_ptr->sen_pads = 0x8888; /* Short Frame PAD Characters */
-
- pram_ptr->sen_retlim = 15; /* Retry Limit Threshold */
- pram_ptr->sen_maxflr = 1518; /* MAX Frame Length Register */
- pram_ptr->sen_minflr = 64; /* MIN Frame Length Register */
-
- pram_ptr->sen_maxd1 = DBUF_LENGTH; /* MAX DMA1 Length Register */
- pram_ptr->sen_maxd2 = DBUF_LENGTH; /* MAX DMA2 Length Register */
-
- pram_ptr->sen_gaddr1 = 0x0; /* Group Address Filter 1 (unused) */
- pram_ptr->sen_gaddr2 = 0x0; /* Group Address Filter 2 (unused) */
- pram_ptr->sen_gaddr3 = 0x0; /* Group Address Filter 3 (unused) */
- pram_ptr->sen_gaddr4 = 0x0; /* Group Address Filter 4 (unused) */
-
-#define ea eth_get_ethaddr()
- pram_ptr->sen_paddrh = (ea[5] << 8) + ea[4];
- pram_ptr->sen_paddrm = (ea[3] << 8) + ea[2];
- pram_ptr->sen_paddrl = (ea[1] << 8) + ea[0];
-#undef ea
-
- pram_ptr->sen_pper = 0x0; /* Persistence (unused) */
- pram_ptr->sen_iaddr1 = 0x0; /* Individual Address Filter 1 (unused) */
- pram_ptr->sen_iaddr2 = 0x0; /* Individual Address Filter 2 (unused) */
- pram_ptr->sen_iaddr3 = 0x0; /* Individual Address Filter 3 (unused) */
- pram_ptr->sen_iaddr4 = 0x0; /* Individual Address Filter 4 (unused) */
- pram_ptr->sen_taddrh = 0x0; /* Tmp Address (MSB) (unused) */
- pram_ptr->sen_taddrm = 0x0; /* Tmp Address (unused) */
- pram_ptr->sen_taddrl = 0x0; /* Tmp Address (LSB) (unused) */
-
- /*
- * Enter Command: Initialize Tx Params for SCC
- */
-
- do { /* Spin until ready to issue command */
- __asm__ ("eieio");
- } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
- /* Issue command */
- immr->im_cpm.cp_cpcr =
- ((CPM_CR_INIT_TX << 8) | (CPM_CR_ENET << 4) | CPM_CR_FLG);
- do { /* Spin until command processed */
- __asm__ ("eieio");
- } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
-
- /*
- * Mask all Events in SCCM - we use polling mode
- */
- immr->im_cpm.cp_scc[SCC_ENET].scc_sccm = 0;
-
- /*
- * Clear Events in SCCE -- Clear bits by writing 1's
- */
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_scce = ~(0x0);
-
-
- /*
- * Initialize GSMR High 32-Bits
- * Settings: Normal Mode
- */
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrh = 0;
-
- /*
- * Initialize GSMR Low 32-Bits, but do not Enable Transmit/Receive
- * Settings:
- * TCI = Invert
- * TPL = 48 bits
- * TPP = Repeating 10's
- * MODE = Ethernet
- */
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl = (SCC_GSMRL_TCI |
- SCC_GSMRL_TPL_48 |
- SCC_GSMRL_TPP_10 |
- SCC_GSMRL_MODE_ENET);
-
- /*
- * Initialize the DSR -- see section 13.14.4 (pg. 513) v0.4
- */
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_dsr = 0xd555;
-
- /*
- * Initialize the PSMR
- * Settings:
- * CRC = 32-Bit CCITT
- * NIB = Begin searching for SFD 22 bits after RENA
- * FDE = Full Duplex Enable
- * LPB = Loopback Enable (Needed when FDE is set)
- * BRO = Reject broadcast packets
- * PROMISCOUS = Catch all packets regardless of dest. MAC adress
- */
- immr->im_cpm.cp_scc[SCC_ENET].scc_psmr = SCC_PSMR_ENCRC |
- SCC_PSMR_NIB22 |
-#if defined(CONFIG_SCC_ENET_FULL_DUPLEX)
- SCC_PSMR_FDE | SCC_PSMR_LPB |
-#endif
-#if defined(CONFIG_SCC_ENET_NO_BROADCAST)
- SCC_PSMR_BRO |
-#endif
-#if defined(CONFIG_SCC_ENET_PROMISCOUS)
- SCC_PSMR_PRO |
-#endif
- 0;
-
- /*
- * Configure Ethernet TENA Signal
- */
-
-#if (defined(PC_ENET_TENA) && !defined(PB_ENET_TENA))
- immr->im_ioport.iop_pcpar |= PC_ENET_TENA;
- immr->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
-#elif (defined(PB_ENET_TENA) && !defined(PC_ENET_TENA))
- immr->im_cpm.cp_pbpar |= PB_ENET_TENA;
- immr->im_cpm.cp_pbdir |= PB_ENET_TENA;
-#else
-#error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined
-#endif
-
- /*
- * Set the ENT/ENR bits in the GSMR Low -- Enable Transmit/Receive
- */
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl |=
- (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
- return 1;
-}
-
-
-static void scc_halt (struct eth_device *dev)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl &=
- ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
- immr->im_ioport.iop_pcso &= ~(PC_ENET_CLSN | PC_ENET_RENA);
-}
-
-#if 0
-void restart (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl |=
- (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-}
-#endif
-#endif
diff --git a/arch/powerpc/cpu/mpc8xx/serial.c b/arch/powerpc/cpu/mpc8xx/serial.c
deleted file mode 100644
index b6e12d0d85..0000000000
--- a/arch/powerpc/cpu/mpc8xx/serial.c
+++ /dev/null
@@ -1,676 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <command.h>
-#include <serial.h>
-#include <watchdog.h>
-#include <linux/compiler.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if !defined(CONFIG_8xx_CONS_NONE) /* No Console at all */
-
-#if defined(CONFIG_8xx_CONS_SMC1) /* Console on SMC1 */
-#define SMC_INDEX 0
-#define PROFF_SMC PROFF_SMC1
-#define CPM_CR_CH_SMC CPM_CR_CH_SMC1
-
-#elif defined(CONFIG_8xx_CONS_SMC2) /* Console on SMC2 */
-#define SMC_INDEX 1
-#define PROFF_SMC PROFF_SMC2
-#define CPM_CR_CH_SMC CPM_CR_CH_SMC2
-
-#endif /* CONFIG_8xx_CONS_SMCx */
-
-#if defined(CONFIG_8xx_CONS_SCC1) /* Console on SCC1 */
-#define SCC_INDEX 0
-#define PROFF_SCC PROFF_SCC1
-#define CPM_CR_CH_SCC CPM_CR_CH_SCC1
-
-#elif defined(CONFIG_8xx_CONS_SCC2) /* Console on SCC2 */
-#define SCC_INDEX 1
-#define PROFF_SCC PROFF_SCC2
-#define CPM_CR_CH_SCC CPM_CR_CH_SCC2
-
-#elif defined(CONFIG_8xx_CONS_SCC3) /* Console on SCC3 */
-#define SCC_INDEX 2
-#define PROFF_SCC PROFF_SCC3
-#define CPM_CR_CH_SCC CPM_CR_CH_SCC3
-
-#elif defined(CONFIG_8xx_CONS_SCC4) /* Console on SCC4 */
-#define SCC_INDEX 3
-#define PROFF_SCC PROFF_SCC4
-#define CPM_CR_CH_SCC CPM_CR_CH_SCC4
-
-#endif /* CONFIG_8xx_CONS_SCCx */
-
-#if !defined(CONFIG_SYS_SMC_RXBUFLEN)
-#define CONFIG_SYS_SMC_RXBUFLEN 1
-#define CONFIG_SYS_MAXIDLE 0
-#else
-#if !defined(CONFIG_SYS_MAXIDLE)
-#error "you must define CONFIG_SYS_MAXIDLE"
-#endif
-#endif
-
-typedef volatile struct serialbuffer {
- cbd_t rxbd; /* Rx BD */
- cbd_t txbd; /* Tx BD */
- uint rxindex; /* index for next character to read */
- volatile uchar rxbuf[CONFIG_SYS_SMC_RXBUFLEN];/* rx buffers */
- volatile uchar txbuf; /* tx buffers */
-} serialbuffer_t;
-
-static void serial_setdivisor(volatile cpm8xx_t *cp)
-{
- int divisor=(gd->cpu_clk + 8*gd->baudrate)/16/gd->baudrate;
-
- if(divisor/16>0x1000) {
- /* bad divisor, assume 50MHz clock and 9600 baud */
- divisor=(50*1000*1000 + 8*9600)/16/9600;
- }
-
-#ifdef CONFIG_SYS_BRGCLK_PRESCALE
- divisor /= CONFIG_SYS_BRGCLK_PRESCALE;
-#endif
-
- if(divisor<=0x1000) {
- cp->cp_brgc1=((divisor-1)<<1) | CPM_BRG_EN;
- } else {
- cp->cp_brgc1=((divisor/16-1)<<1) | CPM_BRG_EN | CPM_BRG_DIV16;
- }
-}
-
-#if (defined (CONFIG_8xx_CONS_SMC1) || defined (CONFIG_8xx_CONS_SMC2))
-
-/*
- * Minimal serial functions needed to use one of the SMC ports
- * as serial console interface.
- */
-
-static void smc_setbrg (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = &(im->im_cpm);
-
- /* Set up the baud rate generator.
- * See 8xx_io/commproc.c for details.
- *
- * Wire BRG1 to SMCx
- */
-
- cp->cp_simode = 0x00000000;
-
- serial_setdivisor(cp);
-}
-
-static int smc_init (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile smc_t *sp;
- volatile smc_uart_t *up;
- volatile cpm8xx_t *cp = &(im->im_cpm);
-#if (!defined(CONFIG_8xx_CONS_SMC1)) && (defined(CONFIG_MPC823) || defined(CONFIG_MPC850))
- volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport);
-#endif
- uint dpaddr;
- volatile serialbuffer_t *rtx;
-
- /* initialize pointers to SMC */
-
- sp = (smc_t *) &(cp->cp_smc[SMC_INDEX]);
- up = (smc_uart_t *) &cp->cp_dparam[PROFF_SMC];
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- up = (smc_uart_t *) &cp->cp_dpmem[up->smc_rpbase];
-#else
- /* Disable relocation */
- up->smc_rpbase = 0;
-#endif
-
- /* Disable transmitter/receiver. */
- sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-
- /* Enable SDMA. */
- im->im_siu_conf.sc_sdcr = 1;
-
- /* clear error conditions */
-#ifdef CONFIG_SYS_SDSR
- im->im_sdma.sdma_sdsr = CONFIG_SYS_SDSR;
-#else
- im->im_sdma.sdma_sdsr = 0x83;
-#endif
-
- /* clear SDMA interrupt mask */
-#ifdef CONFIG_SYS_SDMR
- im->im_sdma.sdma_sdmr = CONFIG_SYS_SDMR;
-#else
- im->im_sdma.sdma_sdmr = 0x00;
-#endif
-
-#if defined(CONFIG_8xx_CONS_SMC1)
- /* Use Port B for SMC1 instead of other functions. */
- cp->cp_pbpar |= 0x000000c0;
- cp->cp_pbdir &= ~0x000000c0;
- cp->cp_pbodr &= ~0x000000c0;
-#else /* CONFIG_8xx_CONS_SMC2 */
-# if defined(CONFIG_MPC823) || defined(CONFIG_MPC850)
- /* Use Port A for SMC2 instead of other functions. */
- ip->iop_papar |= 0x00c0;
- ip->iop_padir &= ~0x00c0;
- ip->iop_paodr &= ~0x00c0;
-# else /* must be a 860 then */
- /* Use Port B for SMC2 instead of other functions.
- */
- cp->cp_pbpar |= 0x00000c00;
- cp->cp_pbdir &= ~0x00000c00;
- cp->cp_pbodr &= ~0x00000c00;
-# endif
-#endif
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
- dpaddr = CPM_SERIAL_BASE;
-
- rtx = (serialbuffer_t *)&cp->cp_dpmem[dpaddr];
- /* Allocate space for two buffer descriptors in the DP ram.
- * For now, this address seems OK, but it may have to
- * change with newer versions of the firmware.
- * damm: allocating space after the two buffers for rx/tx data
- */
-
- rtx->rxbd.cbd_bufaddr = (uint) &rtx->rxbuf;
- rtx->rxbd.cbd_sc = 0;
-
- rtx->txbd.cbd_bufaddr = (uint) &rtx->txbuf;
- rtx->txbd.cbd_sc = 0;
-
- /* Set up the uart parameters in the parameter ram. */
- up->smc_rbase = dpaddr;
- up->smc_tbase = dpaddr+sizeof(cbd_t);
- up->smc_rfcr = SMC_EB;
- up->smc_tfcr = SMC_EB;
-#if defined (CONFIG_SYS_SMC_UCODE_PATCH)
- up->smc_rbptr = up->smc_rbase;
- up->smc_tbptr = up->smc_tbase;
- up->smc_rstate = 0;
- up->smc_tstate = 0;
-#endif
-
- /* Set UART mode, 8 bit, no parity, one stop.
- * Enable receive and transmit.
- */
- sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
-
- /* Mask all interrupts and remove anything pending.
- */
- sp->smc_smcm = 0;
- sp->smc_smce = 0xff;
-
-#ifdef CONFIG_SYS_SPC1920_SMC1_CLK4
- /* clock source is PLD */
-
- /* set freq to 19200 Baud */
- *((volatile uchar *) CONFIG_SYS_SPC1920_PLD_BASE+6) = 0x3;
- /* configure clk4 as input */
- im->im_ioport.iop_pdpar |= 0x800;
- im->im_ioport.iop_pddir &= ~0x800;
-
- cp->cp_simode = ((cp->cp_simode & ~0xf000) | 0x7000);
-#else
- /* Set up the baud rate generator */
- smc_setbrg ();
-#endif
-
- /* Make the first buffer the only buffer. */
- rtx->txbd.cbd_sc |= BD_SC_WRAP;
- rtx->rxbd.cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
- /* single/multi character receive. */
- up->smc_mrblr = CONFIG_SYS_SMC_RXBUFLEN;
- up->smc_maxidl = CONFIG_SYS_MAXIDLE;
- rtx->rxindex = 0;
-
- /* Initialize Tx/Rx parameters. */
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- /* Enable transmitter/receiver. */
- sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-
- return (0);
-}
-
-static void
-smc_putc(const char c)
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
- volatile serialbuffer_t *rtx;
-
- if (c == '\n')
- smc_putc ('\r');
-
- up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
-#endif
-
- rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
- /* Wait for last character to go. */
- rtx->txbuf = c;
- rtx->txbd.cbd_datlen = 1;
- rtx->txbd.cbd_sc |= BD_SC_READY;
- __asm__("eieio");
-
- while (rtx->txbd.cbd_sc & BD_SC_READY) {
- WATCHDOG_RESET ();
- __asm__("eieio");
- }
-}
-
-static void
-smc_puts (const char *s)
-{
- while (*s) {
- smc_putc (*s++);
- }
-}
-
-static int
-smc_getc(void)
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
- volatile serialbuffer_t *rtx;
- unsigned char c;
-
- up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
-#endif
- rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
- /* Wait for character to show up. */
- while (rtx->rxbd.cbd_sc & BD_SC_EMPTY)
- WATCHDOG_RESET ();
-
- /* the characters are read one by one,
- * use the rxindex to know the next char to deliver
- */
- c = *(unsigned char *) (rtx->rxbd.cbd_bufaddr+rtx->rxindex);
- rtx->rxindex++;
-
- /* check if all char are readout, then make prepare for next receive */
- if (rtx->rxindex >= rtx->rxbd.cbd_datlen) {
- rtx->rxindex = 0;
- rtx->rxbd.cbd_sc |= BD_SC_EMPTY;
- }
- return(c);
-}
-
-static int
-smc_tstc(void)
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
- volatile serialbuffer_t *rtx;
-
- up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
-#endif
-
- rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
- return !(rtx->rxbd.cbd_sc & BD_SC_EMPTY);
-}
-
-struct serial_device serial_smc_device =
-{
- .name = "serial_smc",
- .start = smc_init,
- .stop = NULL,
- .setbrg = smc_setbrg,
- .getc = smc_getc,
- .tstc = smc_tstc,
- .putc = smc_putc,
- .puts = smc_puts,
-};
-
-#endif /* CONFIG_8xx_CONS_SMC1 || CONFIG_8xx_CONS_SMC2 */
-
-#if defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) || \
- defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
-
-static void
-scc_setbrg (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = &(im->im_cpm);
-
- /* Set up the baud rate generator.
- * See 8xx_io/commproc.c for details.
- *
- * Wire BRG1 to SCCx
- */
-
- cp->cp_sicr &= ~(0x000000FF << (8 * SCC_INDEX));
-
- serial_setdivisor(cp);
-}
-
-static int scc_init (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile scc_t *sp;
- volatile scc_uart_t *up;
- volatile cbd_t *tbdf, *rbdf;
- volatile cpm8xx_t *cp = &(im->im_cpm);
- uint dpaddr;
-#if (SCC_INDEX != 2) || !defined(CONFIG_MPC850)
- volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport);
-#endif
-
- /* initialize pointers to SCC */
-
- sp = (scc_t *) &(cp->cp_scc[SCC_INDEX]);
- up = (scc_uart_t *) &cp->cp_dparam[PROFF_SCC];
-
- /* Disable transmitter/receiver. */
- sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-#if (SCC_INDEX == 2) && defined(CONFIG_MPC850)
- /*
- * The MPC850 has SCC3 on Port B
- */
- cp->cp_pbpar |= 0x06;
- cp->cp_pbdir &= ~0x06;
- cp->cp_pbodr &= ~0x06;
-
-#elif (SCC_INDEX < 2)
- /*
- * Standard configuration for SCC's is on Part A
- */
- ip->iop_papar |= ((3 << (2 * SCC_INDEX)));
- ip->iop_padir &= ~((3 << (2 * SCC_INDEX)));
- ip->iop_paodr &= ~((3 << (2 * SCC_INDEX)));
-#endif
-
- /* Allocate space for two buffer descriptors in the DP ram. */
- dpaddr = dpram_alloc_align(sizeof(cbd_t)*2 + 2, 8);
-
- /* Enable SDMA. */
- im->im_siu_conf.sc_sdcr = 0x0001;
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
-
- rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr];
- rbdf->cbd_bufaddr = (uint) (rbdf+2);
- rbdf->cbd_sc = 0;
- tbdf = rbdf + 1;
- tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
- tbdf->cbd_sc = 0;
-
- /* Set up the baud rate generator. */
- scc_setbrg ();
-
- /* Set up the uart parameters in the parameter ram. */
- up->scc_genscc.scc_rbase = dpaddr;
- up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
-
- /* Initialize Tx/Rx parameters. */
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SCC, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- up->scc_genscc.scc_rfcr = SCC_EB | 0x05;
- up->scc_genscc.scc_tfcr = SCC_EB | 0x05;
-
- up->scc_genscc.scc_mrblr = 1; /* Single character receive */
- up->scc_maxidl = 0; /* disable max idle */
- up->scc_brkcr = 1; /* send one break character on stop TX */
- up->scc_parec = 0;
- up->scc_frmec = 0;
- up->scc_nosec = 0;
- up->scc_brkec = 0;
- up->scc_uaddr1 = 0;
- up->scc_uaddr2 = 0;
- up->scc_toseq = 0;
- up->scc_char1 = 0x8000;
- up->scc_char2 = 0x8000;
- up->scc_char3 = 0x8000;
- up->scc_char4 = 0x8000;
- up->scc_char5 = 0x8000;
- up->scc_char6 = 0x8000;
- up->scc_char7 = 0x8000;
- up->scc_char8 = 0x8000;
- up->scc_rccm = 0xc0ff;
-
- /* Set low latency / small fifo. */
- sp->scc_gsmrh = SCC_GSMRH_RFW;
-
- /* Set SCC(x) clock mode to 16x
- * See 8xx_io/commproc.c for details.
- *
- * Wire BRG1 to SCCn
- */
-
- /* Set UART mode, clock divider 16 on Tx and Rx */
- sp->scc_gsmrl &= ~0xF;
- sp->scc_gsmrl |=
- (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
-
- sp->scc_psmr = 0;
- sp->scc_psmr |= SCU_PSMR_CL;
-
- /* Mask all interrupts and remove anything pending. */
- sp->scc_sccm = 0;
- sp->scc_scce = 0xffff;
- sp->scc_dsr = 0x7e7e;
- sp->scc_psmr = 0x3000;
-
- /* Make the first buffer the only buffer. */
- tbdf->cbd_sc |= BD_SC_WRAP;
- rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
- /* Enable transmitter/receiver. */
- sp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
- return (0);
-}
-
-static void
-scc_putc(const char c)
-{
- volatile cbd_t *tbdf;
- volatile char *buf;
- volatile scc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
-
- if (c == '\n')
- scc_putc ('\r');
-
- up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
-
- tbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_tbase];
-
- /* Wait for last character to go. */
-
- buf = (char *)tbdf->cbd_bufaddr;
-
- *buf = c;
- tbdf->cbd_datlen = 1;
- tbdf->cbd_sc |= BD_SC_READY;
- __asm__("eieio");
-
- while (tbdf->cbd_sc & BD_SC_READY) {
- __asm__("eieio");
- WATCHDOG_RESET ();
- }
-}
-
-static void
-scc_puts (const char *s)
-{
- while (*s) {
- scc_putc (*s++);
- }
-}
-
-static int
-scc_getc(void)
-{
- volatile cbd_t *rbdf;
- volatile unsigned char *buf;
- volatile scc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
- unsigned char c;
-
- up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
-
- rbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_rbase];
-
- /* Wait for character to show up. */
- buf = (unsigned char *)rbdf->cbd_bufaddr;
-
- while (rbdf->cbd_sc & BD_SC_EMPTY)
- WATCHDOG_RESET ();
-
- c = *buf;
- rbdf->cbd_sc |= BD_SC_EMPTY;
-
- return(c);
-}
-
-static int
-scc_tstc(void)
-{
- volatile cbd_t *rbdf;
- volatile scc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
-
- up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
-
- rbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_rbase];
-
- return(!(rbdf->cbd_sc & BD_SC_EMPTY));
-}
-
-struct serial_device serial_scc_device =
-{
- .name = "serial_scc",
- .start = scc_init,
- .stop = NULL,
- .setbrg = scc_setbrg,
- .getc = scc_getc,
- .tstc = scc_tstc,
- .putc = scc_putc,
- .puts = scc_puts,
-};
-
-#endif /* CONFIG_8xx_CONS_SCCx */
-
-__weak struct serial_device *default_serial_console(void)
-{
-#if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2)
- return &serial_smc_device;
-#else
- return &serial_scc_device;
-#endif
-}
-
-void mpc8xx_serial_initialize(void)
-{
-#if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2)
- serial_register(&serial_smc_device);
-#endif
-#if defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) || \
- defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
- serial_register(&serial_scc_device);
-#endif
-}
-
-#if defined(CONFIG_CMD_KGDB)
-
-void
-kgdb_serial_init(void)
-{
- int i = -1;
-
- if (strcmp(default_serial_console()->name, "serial_smc") == 0)
- {
-#if defined(CONFIG_8xx_CONS_SMC1)
- i = 1;
-#elif defined(CONFIG_8xx_CONS_SMC2)
- i = 2;
-#endif
- }
- else if (strcmp(default_serial_console()->name, "serial_scc") == 0)
- {
-#if defined(CONFIG_8xx_CONS_SCC1)
- i = 1;
-#elif defined(CONFIG_8xx_CONS_SCC2)
- i = 2;
-#elif defined(CONFIG_8xx_CONS_SCC3)
- i = 3;
-#elif defined(CONFIG_8xx_CONS_SCC4)
- i = 4;
-#endif
- }
-
- if (i >= 0)
- {
- serial_printf("[on %s%d] ", default_serial_console()->name, i);
- }
-}
-
-void
-putDebugChar (int c)
-{
- serial_putc (c);
-}
-
-void
-putDebugStr (const char *str)
-{
- serial_puts (str);
-}
-
-int
-getDebugChar (void)
-{
- return serial_getc();
-}
-
-void
-kgdb_interruptible (int yes)
-{
- return;
-}
-#endif
-
-#endif /* CONFIG_8xx_CONS_NONE */
diff --git a/arch/powerpc/cpu/mpc8xx/speed.c b/arch/powerpc/cpu/mpc8xx/speed.c
deleted file mode 100644
index e2295d253f..0000000000
--- a/arch/powerpc/cpu/mpc8xx/speed.c
+++ /dev/null
@@ -1,403 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if !defined(CONFIG_8xx_CPUCLK_DEFAULT) || defined(CONFIG_SYS_MEASURE_CPUCLK) || defined(DEBUG)
-
-#define PITC_SHIFT 16
-#define PITR_SHIFT 16
-/* pitc values to time for 58/8192 seconds (about 70.8 milliseconds) */
-#define SPEED_PIT_COUNTS 58
-#define SPEED_PITC ((SPEED_PIT_COUNTS - 1) << PITC_SHIFT)
-#define SPEED_PITC_INIT ((SPEED_PIT_COUNTS + 1) << PITC_SHIFT)
-
-/* Access functions for the Machine State Register */
-static __inline__ unsigned long get_msr(void)
-{
- unsigned long msr;
-
- asm volatile("mfmsr %0" : "=r" (msr) :);
- return msr;
-}
-
-static __inline__ void set_msr(unsigned long msr)
-{
- asm volatile("mtmsr %0" : : "r" (msr));
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Measure CPU clock speed (core clock GCLK1, GCLK2),
- * also determine bus clock speed (checking bus divider factor)
- *
- * (Approx. GCLK frequency in Hz)
- *
- * Initializes timer 2 and PIT, but disables them before return.
- * [Use timer 2, because MPC823 CPUs mask 0.x do not have timers 3 and 4]
- *
- * When measuring the CPU clock against the PIT, we count cpu clocks
- * for 58/8192 seconds with a prescale divide by 177 for the cpu clock.
- * These strange values for the timing interval and prescaling are used
- * because the formula for the CPU clock is:
- *
- * CPU clock = count * (177 * (8192 / 58))
- *
- * = count * 24999.7241
- *
- * which is very close to
- *
- * = count * 25000
- *
- * Since the count gives the CPU clock divided by 25000, we can get
- * the CPU clock rounded to the nearest 0.1 MHz by
- *
- * CPU clock = ((count + 2) / 4) * 100000;
- *
- * The rounding is important since the measurement is sometimes going
- * to be high or low by 0.025 MHz, depending on exactly how the clocks
- * and counters interact. By rounding we get the exact answer for any
- * CPU clock that is an even multiple of 0.1 MHz.
- */
-
-unsigned long measure_gclk(void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpmtimer8xx_t *timerp = &immr->im_cpmtimer;
- ulong timer2_val;
- ulong msr_val;
-
-#ifdef CONFIG_SYS_8XX_XIN
- /* dont use OSCM, only use EXTCLK/512 */
- immr->im_clkrst.car_sccr |= SCCR_RTSEL | SCCR_RTDIV;
-#else
- immr->im_clkrst.car_sccr &= ~(SCCR_RTSEL | SCCR_RTDIV);
-#endif
-
- /* Reset + Stop Timer 2, no cascading
- */
- timerp->cpmt_tgcr &= ~(TGCR_CAS2 | TGCR_RST2);
-
- /* Keep stopped, halt in debug mode
- */
- timerp->cpmt_tgcr |= (TGCR_FRZ2 | TGCR_STP2);
-
- /* Timer 2 setup:
- * Output ref. interrupt disable, int. clock
- * Prescale by 177. Note that prescaler divides by value + 1
- * so we must subtract 1 here.
- */
- timerp->cpmt_tmr2 = ((177 - 1) << TMR_PS_SHIFT) | TMR_ICLK_IN_GEN;
-
- timerp->cpmt_tcn2 = 0; /* reset state */
- timerp->cpmt_tgcr |= TGCR_RST2; /* enable timer 2 */
-
- /*
- * PIT setup:
- *
- * We want to time for SPEED_PITC_COUNTS counts (of 8192 Hz),
- * so the count value would be SPEED_PITC_COUNTS - 1.
- * But there would be an uncertainty in the start time of 1/4
- * count since when we enable the PIT the count is not
- * synchronized to the 32768 Hz oscillator. The trick here is
- * to start the count higher and wait until the PIT count
- * changes to the required value before starting timer 2.
- *
- * One count high should be enough, but occasionally the start
- * is off by 1 or 2 counts of 32768 Hz. With the start value
- * set two counts high it seems very reliable.
- */
-
- immr->im_sitk.sitk_pitck = KAPWR_KEY; /* PIT initialization */
- immr->im_sit.sit_pitc = SPEED_PITC_INIT;
-
- immr->im_sitk.sitk_piscrk = KAPWR_KEY;
- immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
-
- /*
- * Start measurement - disable interrupts, just in case
- */
- msr_val = get_msr ();
- set_msr (msr_val & ~MSR_EE);
-
- immr->im_sit.sit_piscr |= PISCR_PTE;
-
- /* spin until get exact count when we want to start */
- while (immr->im_sit.sit_pitr > SPEED_PITC);
-
- timerp->cpmt_tgcr &= ~TGCR_STP2; /* Start Timer 2 */
- while ((immr->im_sit.sit_piscr & PISCR_PS) == 0);
- timerp->cpmt_tgcr |= TGCR_STP2; /* Stop Timer 2 */
-
- /* re-enable external interrupts if they were on */
- set_msr (msr_val);
-
- /* Disable timer and PIT
- */
- timer2_val = timerp->cpmt_tcn2; /* save before reset timer */
-
- timerp->cpmt_tgcr &= ~(TGCR_RST2 | TGCR_FRZ2 | TGCR_STP2);
- immr->im_sit.sit_piscr &= ~PISCR_PTE;
-
-#if defined(CONFIG_SYS_8XX_XIN)
- /* not using OSCM, using XIN, so scale appropriately */
- return (((timer2_val + 2) / 4) * (CONFIG_SYS_8XX_XIN/512))/8192 * 100000L;
-#else
- return ((timer2_val + 2) / 4) * 100000L; /* convert to Hz */
-#endif
-}
-
-#endif
-
-void get_brgclk(uint sccr)
-{
- uint divider = 0;
-
- switch((sccr&SCCR_DFBRG11)>>11){
- case 0:
- divider = 1;
- break;
- case 1:
- divider = 4;
- break;
- case 2:
- divider = 16;
- break;
- case 3:
- divider = 64;
- break;
- }
- gd->arch.brg_clk = gd->cpu_clk/divider;
-}
-
-#if !defined(CONFIG_8xx_CPUCLK_DEFAULT)
-
-/*
- * get_clocks() fills in gd->cpu_clock depending on CONFIG_8xx_GCLK_FREQ
- * or (if it is not defined) measure_gclk() (which uses the ref clock)
- * from above.
- */
-int get_clocks (void)
-{
- uint immr = get_immr (0); /* Return full IMMR contents */
- volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
- uint sccr = immap->im_clkrst.car_sccr;
- /*
- * If for some reason measuring the gclk frequency won't
- * work, we return the hardwired value.
- * (For example, the cogent CMA286-60 CPU module has no
- * separate oscillator for PITRTCLK)
- */
-#if defined(CONFIG_8xx_GCLK_FREQ)
- gd->cpu_clk = CONFIG_8xx_GCLK_FREQ;
-#elif defined(CONFIG_8xx_OSCLK)
-#define PLPRCR_val(a) ((pll & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
- uint pll = immap->im_clkrst.car_plprcr;
- uint clk;
-
- if ((immr & 0x0FFF) >= MPC8xx_NEW_CLK) { /* MPC866/87x/88x series */
- clk = ((CONFIG_8xx_OSCLK / (PLPRCR_val(PDF)+1)) *
- (PLPRCR_val(MFI) + PLPRCR_val(MFN) / (PLPRCR_val(MFD)+1))) /
- (1<<PLPRCR_val(S));
- } else {
- clk = CONFIG_8xx_OSCLK * (PLPRCR_val(MF)+1);
- }
- if (pll & PLPRCR_CSRC) { /* Low frequency division factor is used */
- gd->cpu_clk = clk / (2 << ((sccr >> 8) & 7));
- } else { /* High frequency division factor is used */
- gd->cpu_clk = clk / (1 << ((sccr >> 5) & 7));
- }
-#else
- gd->cpu_clk = measure_gclk();
-#endif /* CONFIG_8xx_GCLK_FREQ */
-
- if ((sccr & SCCR_EBDF11) == 0) {
- /* No Bus Divider active */
- gd->bus_clk = gd->cpu_clk;
- } else {
- /* The MPC8xx has only one BDF: half clock speed */
- gd->bus_clk = gd->cpu_clk / 2;
- }
-
- get_brgclk(sccr);
-
- return (0);
-}
-
-#else /* CONFIG_8xx_CPUCLK_DEFAULT defined, use dynamic clock setting */
-
-static long init_pll_866 (long clk);
-
-/* Adjust sdram refresh rate to actual CPU clock.
- */
-static int sdram_adjust_866(void)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- long mamr;
-
- mamr = immr->im_memctl.memc_mamr;
- mamr &= ~MAMR_PTA_MSK;
- mamr |= ((gd->cpu_clk / CONFIG_SYS_PTA_PER_CLK) << MAMR_PTA_SHIFT);
- immr->im_memctl.memc_mamr = mamr;
-
- return 0;
-}
-
-/*
- * Adjust sdram refresh rate to actual CPU clock
- * and set timebase source according to actual CPU clock
- */
-static int adjust_sdram_tbs_8xx(void)
-{
-#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) && \
- !defined(CONFIG_TQM885D)
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- long mamr;
- long sccr;
-
- mamr = immr->im_memctl.memc_mamr;
- mamr &= ~MAMR_PTA_MSK;
- mamr |= ((gd->cpu_clk / CONFIG_SYS_PTA_PER_CLK) << MAMR_PTA_SHIFT);
- immr->im_memctl.memc_mamr = mamr;
-
- if (gd->cpu_clk < 67000000) {
- sccr = immr->im_clkrst.car_sccr;
- sccr |= SCCR_TBS;
- immr->im_clkrst.car_sccr = sccr;
- }
-#endif /* CONFIG_TQM8xxL/M, !TQM866M, !TQM885D */
-
- return 0;
-}
-
-/* This function sets up PLL (init_pll_866() is called) and
- * fills gd->cpu_clk and gd->bus_clk according to the environment
- * variable 'cpuclk' or to CONFIG_8xx_CPUCLK_DEFAULT (if 'cpuclk'
- * contains invalid value).
- * This functions requires an MPC866 or newer series CPU.
- */
-int get_clocks(void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- char tmp[64];
- long cpuclk = 0;
- long sccr_reg;
- int ret;
-
- if (getenv_f("cpuclk", tmp, sizeof (tmp)) > 0)
- cpuclk = simple_strtoul (tmp, NULL, 10) * 1000000;
-
- if ((CONFIG_SYS_8xx_CPUCLK_MIN > cpuclk) || (CONFIG_SYS_8xx_CPUCLK_MAX < cpuclk))
- cpuclk = CONFIG_8xx_CPUCLK_DEFAULT;
-
- gd->cpu_clk = init_pll_866 (cpuclk);
-#if defined(CONFIG_SYS_MEASURE_CPUCLK)
- gd->cpu_clk = measure_gclk ();
-#endif
-
- get_brgclk(immr->im_clkrst.car_sccr);
-
- /* if cpu clock <= 66 MHz then set bus division factor to 1,
- * otherwise set it to 2
- */
- sccr_reg = immr->im_clkrst.car_sccr;
- sccr_reg &= ~SCCR_EBDF11;
-
- if (gd->cpu_clk <= 66000000) {
- sccr_reg |= SCCR_EBDF00; /* bus division factor = 1 */
- gd->bus_clk = gd->cpu_clk;
- } else {
- sccr_reg |= SCCR_EBDF01; /* bus division factor = 2 */
- gd->bus_clk = gd->cpu_clk / 2;
- }
- immr->im_clkrst.car_sccr = sccr_reg;
-
- ret = sdram_adjust_866();
- if (ret)
- return ret;
-
- return adjust_sdram_tbs_8xx();
-}
-
-/* Configure PLL for MPC866/859/885 CPU series
- * PLL multiplication factor is set to the value nearest to the desired clk,
- * assuming a oscclk of 10 MHz.
- */
-static long init_pll_866 (long clk)
-{
- extern void plprcr_write_866 (long);
-
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- long n, plprcr;
- char mfi, mfn, mfd, s, pdf;
- long step_mfi, step_mfn;
-
- if (clk < 20000000) {
- clk *= 2;
- pdf = 1;
- } else {
- pdf = 0;
- }
-
- if (clk < 40000000) {
- s = 2;
- step_mfi = CONFIG_8xx_OSCLK / 4;
- mfd = 7;
- step_mfn = CONFIG_8xx_OSCLK / 30;
- } else if (clk < 80000000) {
- s = 1;
- step_mfi = CONFIG_8xx_OSCLK / 2;
- mfd = 14;
- step_mfn = CONFIG_8xx_OSCLK / 30;
- } else {
- s = 0;
- step_mfi = CONFIG_8xx_OSCLK;
- mfd = 29;
- step_mfn = CONFIG_8xx_OSCLK / 30;
- }
-
- /* Calculate integer part of multiplication factor
- */
- n = clk / step_mfi;
- mfi = (char)n;
-
- /* Calculate numerator of fractional part of multiplication factor
- */
- n = clk - (n * step_mfi);
- mfn = (char)(n / step_mfn);
-
- /* Calculate effective clk
- */
- n = ((mfi * step_mfi) + (mfn * step_mfn)) / (pdf + 1);
-
- immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
-
- plprcr = (immr->im_clkrst.car_plprcr & ~(PLPRCR_MFN_MSK
- | PLPRCR_MFD_MSK | PLPRCR_S_MSK
- | PLPRCR_MFI_MSK | PLPRCR_DBRMO
- | PLPRCR_PDF_MSK))
- | (mfn << PLPRCR_MFN_SHIFT)
- | (mfd << PLPRCR_MFD_SHIFT)
- | (s << PLPRCR_S_SHIFT)
- | (mfi << PLPRCR_MFI_SHIFT)
- | (pdf << PLPRCR_PDF_SHIFT);
-
- if( (mfn > 0) && ((mfd / mfn) > 10) )
- plprcr |= PLPRCR_DBRMO;
-
- plprcr_write_866 (plprcr); /* set value using SIU4/9 workaround */
- immr->im_clkrstk.cark_plprcrk = 0x00000000;
-
- return (n);
-}
-
-#endif /* CONFIG_8xx_CPUCLK_DEFAULT */
diff --git a/arch/powerpc/cpu/mpc8xx/spi.c b/arch/powerpc/cpu/mpc8xx/spi.c
deleted file mode 100644
index 35b425e7c1..0000000000
--- a/arch/powerpc/cpu/mpc8xx/spi.c
+++ /dev/null
@@ -1,533 +0,0 @@
-/*
- * Copyright (c) 2001 Navin Boppuri / Prashant Patel
- * <nboppuri@trinetcommunication.com>,
- * <pmpatel@trinetcommunication.com>
- * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
- * Copyright (c) 2001 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * MPC8xx CPM SPI interface.
- *
- * Parts of this code are probably not portable and/or specific to
- * the board which I used for the tests. Please send fixes/complaints
- * to wd@denx.de
- *
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <commproc.h>
-#include <linux/ctype.h>
-#include <malloc.h>
-#include <post.h>
-#include <serial.h>
-
-#if (defined(CONFIG_SPI)) || (CONFIG_POST & CONFIG_SYS_POST_SPI)
-
-/* Warning:
- * You cannot enable DEBUG for early system initalization, i. e. when
- * this driver is used to read environment parameters like "baudrate"
- * from EEPROM which are used to initialize the serial port which is
- * needed to print the debug messages...
- */
-#undef DEBUG
-
-#define SPI_EEPROM_WREN 0x06
-#define SPI_EEPROM_RDSR 0x05
-#define SPI_EEPROM_READ 0x03
-#define SPI_EEPROM_WRITE 0x02
-
-/* ---------------------------------------------------------------
- * Offset for initial SPI buffers in DPRAM:
- * We need a 520 byte scratch DPRAM area to use at an early stage.
- * It is used between the two initialization calls (spi_init_f()
- * and spi_init_r()).
- * The value 0xb00 makes it far enough from the start of the data
- * area (as well as from the stack pointer).
- * --------------------------------------------------------------- */
-#ifndef CONFIG_SYS_SPI_INIT_OFFSET
-#define CONFIG_SYS_SPI_INIT_OFFSET 0xB00
-#endif
-
-#ifdef DEBUG
-
-#define DPRINT(a) printf a;
-/* -----------------------------------------------
- * Helper functions to peek into tx and rx buffers
- * ----------------------------------------------- */
-static const char * const hex_digit = "0123456789ABCDEF";
-
-static char quickhex (int i)
-{
- return hex_digit[i];
-}
-
-static void memdump (void *pv, int num)
-{
- int i;
- unsigned char *pc = (unsigned char *) pv;
-
- for (i = 0; i < num; i++)
- printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
- printf ("\t");
- for (i = 0; i < num; i++)
- printf ("%c", isprint (pc[i]) ? pc[i] : '.');
- printf ("\n");
-}
-#else /* !DEBUG */
-
-#define DPRINT(a)
-
-#endif /* DEBUG */
-
-/* -------------------
- * Function prototypes
- * ------------------- */
-void spi_init (void);
-
-ssize_t spi_read (uchar *, int, uchar *, int);
-ssize_t spi_write (uchar *, int, uchar *, int);
-ssize_t spi_xfer (size_t);
-
-/* -------------------
- * Variables
- * ------------------- */
-
-#define MAX_BUFFER 0x104
-
-/* ----------------------------------------------------------------------
- * Initially we place the RX and TX buffers at a fixed location in DPRAM!
- * ---------------------------------------------------------------------- */
-static uchar *rxbuf =
- (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem
- [CONFIG_SYS_SPI_INIT_OFFSET];
-static uchar *txbuf =
- (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem
- [CONFIG_SYS_SPI_INIT_OFFSET+MAX_BUFFER];
-
-/* **************************************************************************
- *
- * Function: spi_init_f
- *
- * Description: Init SPI-Controller (ROM part)
- *
- * return: ---
- *
- * *********************************************************************** */
-void spi_init_f (void)
-{
- unsigned int dpaddr;
-
- volatile spi_t *spi;
- volatile immap_t *immr;
- volatile cpm8xx_t *cp;
- volatile cbd_t *tbdf, *rbdf;
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- cp = (cpm8xx_t *) &immr->im_cpm;
-
-#ifdef CONFIG_SYS_SPI_UCODE_PATCH
- spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
-#else
- spi = (spi_t *)&cp->cp_dparam[PROFF_SPI];
- /* Disable relocation */
- spi->spi_rpbase = 0;
-#endif
-
-/* 1 */
- /* ------------------------------------------------
- * Initialize Port B SPI pins -> page 34-8 MPC860UM
- * (we are only in Master Mode !)
- * ------------------------------------------------ */
-
- /* --------------------------------------------
- * GPIO or per. Function
- * PBPAR[28] = 1 [0x00000008] -> PERI: (SPIMISO)
- * PBPAR[29] = 1 [0x00000004] -> PERI: (SPIMOSI)
- * PBPAR[30] = 1 [0x00000002] -> PERI: (SPICLK)
- * PBPAR[31] = 0 [0x00000001] -> GPIO: (CS for PCUE/CCM-EEPROM)
- * -------------------------------------------- */
- cp->cp_pbpar |= 0x0000000E; /* set bits */
- cp->cp_pbpar &= ~0x00000001; /* reset bit */
-
- /* ----------------------------------------------
- * In/Out or per. Function 0/1
- * PBDIR[28] = 1 [0x00000008] -> PERI1: SPIMISO
- * PBDIR[29] = 1 [0x00000004] -> PERI1: SPIMOSI
- * PBDIR[30] = 1 [0x00000002] -> PERI1: SPICLK
- * PBDIR[31] = 1 [0x00000001] -> GPIO OUT: CS for PCUE/CCM-EEPROM
- * ---------------------------------------------- */
- cp->cp_pbdir |= 0x0000000F;
-
- /* ----------------------------------------------
- * open drain or active output
- * PBODR[28] = 1 [0x00000008] -> open drain: SPIMISO
- * PBODR[29] = 0 [0x00000004] -> active output SPIMOSI
- * PBODR[30] = 0 [0x00000002] -> active output: SPICLK
- * PBODR[31] = 0 [0x00000001] -> active output: GPIO OUT: CS for PCUE/CCM
- * ---------------------------------------------- */
-
- cp->cp_pbodr |= 0x00000008;
- cp->cp_pbodr &= ~0x00000007;
-
- /* Initialize the parameter ram.
- * We need to make sure many things are initialized to zero
- */
- spi->spi_rstate = 0;
- spi->spi_rdp = 0;
- spi->spi_rbptr = 0;
- spi->spi_rbc = 0;
- spi->spi_rxtmp = 0;
- spi->spi_tstate = 0;
- spi->spi_tdp = 0;
- spi->spi_tbptr = 0;
- spi->spi_tbc = 0;
- spi->spi_txtmp = 0;
-
- dpaddr = CPM_SPI_BASE;
-
-/* 3 */
- /* Set up the SPI parameters in the parameter ram */
- spi->spi_rbase = dpaddr;
- spi->spi_tbase = dpaddr + sizeof (cbd_t);
-
- /***********IMPORTANT******************/
-
- /*
- * Setting transmit and receive buffer descriptor pointers
- * initially to rbase and tbase. Only the microcode patches
- * documentation talks about initializing this pointer. This
- * is missing from the sample I2C driver. If you dont
- * initialize these pointers, the kernel hangs.
- */
- spi->spi_rbptr = spi->spi_rbase;
- spi->spi_tbptr = spi->spi_tbase;
-
-/* 4 */
-#ifdef CONFIG_SYS_SPI_UCODE_PATCH
- /*
- * Initialize required parameters if using microcode patch.
- */
- spi->spi_rstate = 0;
- spi->spi_tstate = 0;
-#else
- /* Init SPI Tx + Rx Parameters */
- while (cp->cp_cpcr & CPM_CR_FLG)
- ;
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SPI, CPM_CR_INIT_TRX) | CPM_CR_FLG;
- while (cp->cp_cpcr & CPM_CR_FLG)
- ;
-#endif /* CONFIG_SYS_SPI_UCODE_PATCH */
-
-/* 5 */
- /* Set SDMA configuration register */
- immr->im_siu_conf.sc_sdcr = 0x0001;
-
-/* 6 */
- /* Set to big endian. */
- spi->spi_tfcr = SMC_EB;
- spi->spi_rfcr = SMC_EB;
-
-/* 7 */
- /* Set maximum receive size. */
- spi->spi_mrblr = MAX_BUFFER;
-
-/* 8 + 9 */
- /* tx and rx buffer descriptors */
- tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
- rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
-
- tbdf->cbd_sc &= ~BD_SC_READY;
- rbdf->cbd_sc &= ~BD_SC_EMPTY;
-
- /* Set the bd's rx and tx buffer address pointers */
- rbdf->cbd_bufaddr = (ulong) rxbuf;
- tbdf->cbd_bufaddr = (ulong) txbuf;
-
-/* 10 + 11 */
- cp->cp_spim = 0; /* Mask all SPI events */
- cp->cp_spie = SPI_EMASK; /* Clear all SPI events */
-
- return;
-}
-
-/* **************************************************************************
- *
- * Function: spi_init_r
- *
- * Description: Init SPI-Controller (RAM part) -
- * The malloc engine is ready and we can move our buffers to
- * normal RAM
- *
- * return: ---
- *
- * *********************************************************************** */
-void spi_init_r (void)
-{
- volatile cpm8xx_t *cp;
- volatile spi_t *spi;
- volatile immap_t *immr;
- volatile cbd_t *tbdf, *rbdf;
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- cp = (cpm8xx_t *) &immr->im_cpm;
-
-#ifdef CONFIG_SYS_SPI_UCODE_PATCH
- spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
-#else
- spi = (spi_t *)&cp->cp_dparam[PROFF_SPI];
- /* Disable relocation */
- spi->spi_rpbase = 0;
-#endif
-
- /* tx and rx buffer descriptors */
- tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
- rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
-
- /* Allocate memory for RX and TX buffers */
- rxbuf = (uchar *) malloc (MAX_BUFFER);
- txbuf = (uchar *) malloc (MAX_BUFFER);
-
- rbdf->cbd_bufaddr = (ulong) rxbuf;
- tbdf->cbd_bufaddr = (ulong) txbuf;
-
- return;
-}
-
-/****************************************************************************
- * Function: spi_write
- **************************************************************************** */
-ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
-{
- int i;
-
- memset(rxbuf, 0, MAX_BUFFER);
- memset(txbuf, 0, MAX_BUFFER);
- *txbuf = SPI_EEPROM_WREN; /* write enable */
- spi_xfer(1);
- memcpy(txbuf, addr, alen);
- *txbuf = SPI_EEPROM_WRITE; /* WRITE memory array */
- memcpy(alen + txbuf, buffer, len);
- spi_xfer(alen + len);
- /* ignore received data */
- for (i = 0; i < 1000; i++) {
- *txbuf = SPI_EEPROM_RDSR; /* read status */
- txbuf[1] = 0;
- spi_xfer(2);
- if (!(rxbuf[1] & 1)) {
- break;
- }
- udelay(1000);
- }
- if (i >= 1000) {
- printf ("*** spi_write: Time out while writing!\n");
- }
-
- return len;
-}
-
-/****************************************************************************
- * Function: spi_read
- **************************************************************************** */
-ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
-{
- memset(rxbuf, 0, MAX_BUFFER);
- memset(txbuf, 0, MAX_BUFFER);
- memcpy(txbuf, addr, alen);
- *txbuf = SPI_EEPROM_READ; /* READ memory array */
-
- /*
- * There is a bug in 860T (?) that cuts the last byte of input
- * if we're reading into DPRAM. The solution we choose here is
- * to always read len+1 bytes (we have one extra byte at the
- * end of the buffer).
- */
- spi_xfer(alen + len + 1);
- memcpy(buffer, alen + rxbuf, len);
-
- return len;
-}
-
-/****************************************************************************
- * Function: spi_xfer
- **************************************************************************** */
-ssize_t spi_xfer (size_t count)
-{
- volatile immap_t *immr;
- volatile cpm8xx_t *cp;
- volatile spi_t *spi;
- cbd_t *tbdf, *rbdf;
- ushort loop;
- int tm;
-
- DPRINT (("*** spi_xfer entered ***\n"));
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- cp = (cpm8xx_t *) &immr->im_cpm;
-
-#ifdef CONFIG_SYS_SPI_UCODE_PATCH
- spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
-#else
- spi = (spi_t *)&cp->cp_dparam[PROFF_SPI];
- /* Disable relocation */
- spi->spi_rpbase = 0;
-#endif
-
- tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
- rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
-
- /* Set CS for device */
- cp->cp_pbdat &= ~0x0001;
-
- /* Setting tx bd status and data length */
- tbdf->cbd_sc = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP;
- tbdf->cbd_datlen = count;
-
- DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n",
- tbdf->cbd_datlen));
-
- /* Setting rx bd status and data length */
- rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
- rbdf->cbd_datlen = 0; /* rx length has no significance */
-
- loop = cp->cp_spmode & SPMODE_LOOP;
- cp->cp_spmode = /*SPMODE_DIV16 |*/ /* BRG/16 mode not used here */
- loop |
- SPMODE_REV |
- SPMODE_MSTR |
- SPMODE_EN |
- SPMODE_LEN(8) | /* 8 Bits per char */
- SPMODE_PM(0x8) ; /* medium speed */
- cp->cp_spim = 0; /* Mask all SPI events */
- cp->cp_spie = SPI_EMASK; /* Clear all SPI events */
-
- /* start spi transfer */
- DPRINT (("*** spi_xfer: Performing transfer ...\n"));
- cp->cp_spcom |= SPI_STR; /* Start transmit */
-
- /* --------------------------------
- * Wait for SPI transmit to get out
- * or time out (1 second = 1000 ms)
- * -------------------------------- */
- for (tm=0; tm<1000; ++tm) {
- if (cp->cp_spie & SPI_TXB) { /* Tx Buffer Empty */
- DPRINT (("*** spi_xfer: Tx buffer empty\n"));
- break;
- }
- if ((tbdf->cbd_sc & BD_SC_READY) == 0) {
- DPRINT (("*** spi_xfer: Tx BD done\n"));
- break;
- }
- udelay (1000);
- }
- if (tm >= 1000) {
- printf ("*** spi_xfer: Time out while xferring to/from SPI!\n");
- }
- DPRINT (("*** spi_xfer: ... transfer ended\n"));
-
-#ifdef DEBUG
- printf ("\nspi_xfer: txbuf after xfer\n");
- memdump ((void *) txbuf, 16); /* dump of txbuf before transmit */
- printf ("spi_xfer: rxbuf after xfer\n");
- memdump ((void *) rxbuf, 16); /* dump of rxbuf after transmit */
- printf ("\n");
-#endif
-
- /* Clear CS for device */
- cp->cp_pbdat |= 0x0001;
-
- return count;
-}
-#endif /* CONFIG_SPI || (CONFIG_POST & CONFIG_SYS_POST_SPI) */
-
-/*
- * SPI test
- *
- * The Serial Peripheral Interface (SPI) is tested in the local loopback mode.
- * The interface is configured accordingly and several packets
- * are transferred. The configurable test parameters are:
- * TEST_MIN_LENGTH - minimum size of packet to transfer
- * TEST_MAX_LENGTH - maximum size of packet to transfer
- * TEST_NUM - number of tests
- */
-
-#if CONFIG_POST & CONFIG_SYS_POST_SPI
-
-#define TEST_MIN_LENGTH 1
-#define TEST_MAX_LENGTH MAX_BUFFER
-#define TEST_NUM 1
-
-static void packet_fill (char * packet, int length)
-{
- char c = (char) length;
- int i;
-
- for (i = 0; i < length; i++)
- {
- packet[i] = c++;
- }
-}
-
-static int packet_check (char * packet, int length)
-{
- char c = (char) length;
- int i;
-
- for (i = 0; i < length; i++) {
- if (packet[i] != c++) return -1;
- }
-
- return 0;
-}
-
-int spi_post_test (int flags)
-{
- int res = -1;
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = (cpm8xx_t *) & immr->im_cpm;
- int i;
- int l;
-
- spi_init_f ();
- spi_init_r ();
-
- cp->cp_spmode |= SPMODE_LOOP;
-
- for (i = 0; i < TEST_NUM; i++) {
- for (l = TEST_MIN_LENGTH; l <= TEST_MAX_LENGTH; l += 8) {
- packet_fill ((char *)txbuf, l);
-
- spi_xfer (l);
-
- if (packet_check ((char *)rxbuf, l) < 0) {
- goto Done;
- }
- }
- }
-
- res = 0;
-
- Done:
-
- cp->cp_spmode &= ~SPMODE_LOOP;
-
- /*
- * SCC2 parameter RAM space overlaps
- * the SPI parameter RAM space. So we need to restore
- * the SCC2 configuration if it is used by UART.
- */
-
-#if !defined(CONFIG_8xx_CONS_NONE)
- serial_reinit_all ();
-#endif
-
- if (res != 0) {
- post_log ("SPI test failed\n");
- }
-
- return res;
-}
-#endif /* CONFIG_POST & CONFIG_SYS_POST_SPI */
diff --git a/arch/powerpc/cpu/mpc8xx/start.S b/arch/powerpc/cpu/mpc8xx/start.S
deleted file mode 100644
index f8aa93d611..0000000000
--- a/arch/powerpc/cpu/mpc8xx/start.S
+++ /dev/null
@@ -1,650 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* U-Boot - Startup Code for PowerPC based Embedded Boards
- *
- *
- * The processor starts at 0x00000100 and the code is executed
- * from flash. The code is organized to be at an other address
- * in memory, but as long we don't jump around before relocating,
- * board_init lies at a quite high address and when the cpu has
- * jumped there, everything is ok.
- * This works because the cpu gives the FLASH (CS0) the whole
- * address space at startup, and board_init lies as a echo of
- * the flash somewhere up there in the memory map.
- *
- * board_init will change CS0 to be positioned at the correct
- * address and (s)dram will be positioned at address 0
- */
-#include <asm-offsets.h>
-#include <config.h>
-#include <mpc8xx.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <asm/u-boot.h>
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-#define MSR_KERNEL ( MSR_ME | MSR_RI ) /* Machine Check and Recoverable Interr. */
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(__bss_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-
-/*
- * r3 - 1st arg to board_init(): IMMP pointer
- * r4 - 2nd arg to board_init(): boot flag
- */
- .text
- .long 0x27051956 /* U-Boot Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION_STRING, "\0"
-
- . = EXC_OFF_SYS_RESET
- .globl _start
-_start:
- lis r3, CONFIG_SYS_IMMR@h /* position IMMR */
- mtspr 638, r3
-
- /* Initialize machine status; enable machine check interrupt */
- /*----------------------------------------------------------------------*/
- li r3, MSR_KERNEL /* Set ME, RI flags */
- mtmsr r3
- mtspr SRR1, r3 /* Make SRR1 match MSR */
-
- mfspr r3, ICR /* clear Interrupt Cause Register */
-
- /* Initialize debug port registers */
- /*----------------------------------------------------------------------*/
- xor r0, r0, r0 /* Clear R0 */
- mtspr LCTRL1, r0 /* Initialize debug port regs */
- mtspr LCTRL2, r0
- mtspr COUNTA, r0
- mtspr COUNTB, r0
-
- /* Reset the caches */
- /*----------------------------------------------------------------------*/
-
- mfspr r3, IC_CST /* Clear error bits */
- mfspr r3, DC_CST
-
- lis r3, IDC_UNALL@h /* Unlock all */
- mtspr IC_CST, r3
- mtspr DC_CST, r3
-
- lis r3, IDC_INVALL@h /* Invalidate all */
- mtspr IC_CST, r3
- mtspr DC_CST, r3
-
- lis r3, IDC_DISABLE@h /* Disable data cache */
- mtspr DC_CST, r3
-
-#if !defined(CONFIG_SYS_DELAYED_ICACHE)
- /* On IP860 and PCU E,
- * we cannot enable IC yet
- */
- lis r3, IDC_ENABLE@h /* Enable instruction cache */
-#endif
- mtspr IC_CST, r3
-
- /* invalidate all tlb's */
- /*----------------------------------------------------------------------*/
-
- tlbia
- isync
-
- /*
- * Calculate absolute address in FLASH and jump there
- *----------------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_MONITOR_BASE@h
- ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
- addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
- mtlr r3
- blr
-
-in_flash:
-
- /* initialize some SPRs that are hard to access from C */
- /*----------------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_IMMR@h /* pass IMMR as arg1 to C routine */
- ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET /* set up the stack in internal DPRAM */
- /* Note: R0 is still 0 here */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- /*
- * Disable serialized ifetch and show cycles
- * (i.e. set processor to normal mode).
- * This is also a silicon bug workaround, see errata
- */
-
- li r2, 0x0007
- mtspr ICTRL, r2
-
- /* Set up debug mode entry */
-
- lis r2, CONFIG_SYS_DER@h
- ori r2, r2, CONFIG_SYS_DER@l
- mtspr DER, r2
-
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*----------------------------------------------------------------------*/
-
- GET_GOT /* initialize GOT access */
-
- /* r3: IMMR */
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
-
- bl board_init_f /* run 1st part of board init code (from Flash) */
-
- /* NOTREACHED - board_init_f() does not return */
-
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- /* No FPU on MPC8xx. This exception is not supposed to happen.
- */
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
- /* On the MPC8xx, this is a software emulation interrupt. It occurs
- * for all unimplemented and illegal instructions.
- */
- STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
-
- STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
- STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
- STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
-
- STD_EXCEPTION(0x1500, Reserved5, UnknownException)
- STD_EXCEPTION(0x1600, Reserved6, UnknownException)
- STD_EXCEPTION(0x1700, Reserved7, UnknownException)
- STD_EXCEPTION(0x1800, Reserved8, UnknownException)
- STD_EXCEPTION(0x1900, Reserved9, UnknownException)
- STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
- STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
-
- STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
- STD_EXCEPTION(0x1d00, InstructionBreakpoint, DebugException)
- STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
- STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
-
-
- .globl _end_of_vectors
-_end_of_vectors:
-
-
- . = 0x2000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- mtspr SPRG2,r22 /* r1 is now kernel sp */
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-/* Cache functions.
-*/
- .globl icache_enable
-icache_enable:
- SYNC
- lis r3, IDC_INVALL@h
- mtspr IC_CST, r3
- lis r3, IDC_ENABLE@h
- mtspr IC_CST, r3
- blr
-
- .globl icache_disable
-icache_disable:
- SYNC
- lis r3, IDC_DISABLE@h
- mtspr IC_CST, r3
- blr
-
- .globl icache_status
-icache_status:
- mfspr r3, IC_CST
- srwi r3, r3, 31 /* >>31 => select bit 0 */
- blr
-
- .globl dcache_enable
-dcache_enable:
-#if 0
- SYNC
-#endif
-#if 1
- lis r3, 0x0400 /* Set cache mode with MMU off */
- mtspr MD_CTR, r3
-#endif
-
- lis r3, IDC_INVALL@h
- mtspr DC_CST, r3
-#if 0
- lis r3, DC_SFWT@h
- mtspr DC_CST, r3
-#endif
- lis r3, IDC_ENABLE@h
- mtspr DC_CST, r3
- blr
-
- .globl dcache_disable
-dcache_disable:
- SYNC
- lis r3, IDC_DISABLE@h
- mtspr DC_CST, r3
- lis r3, IDC_INVALL@h
- mtspr DC_CST, r3
- blr
-
- .globl dcache_status
-dcache_status:
- mfspr r3, DC_CST
- srwi r3, r3, 31 /* >>31 => select bit 0 */
- blr
-
- .globl dc_read
-dc_read:
- mtspr DC_ADR, r3
- mfspr r3, DC_DAT
- blr
-
-/*
- * unsigned int get_immr (unsigned int mask)
- *
- * return (mask ? (IMMR & mask) : IMMR);
- */
- .globl get_immr
-get_immr:
- mr r4,r3 /* save mask */
- mfspr r3, IMMR /* IMMR */
- cmpwi 0,r4,0 /* mask != 0 ? */
- beq 4f
- and r3,r3,r4 /* IMMR & mask */
-4:
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-
- .globl wr_ic_cst
-wr_ic_cst:
- mtspr IC_CST, r3
- blr
-
- .globl rd_ic_cst
-rd_ic_cst:
- mfspr r3, IC_CST
- blr
-
- .globl wr_ic_adr
-wr_ic_adr:
- mtspr IC_ADR, r3
- blr
-
-
- .globl wr_dc_cst
-wr_dc_cst:
- mtspr DC_CST, r3
- blr
-
- .globl rd_dc_cst
-rd_dc_cst:
- mfspr r3, DC_CST
- blr
-
- .globl wr_dc_adr
-wr_dc_adr:
- mtspr DC_ADR, r3
- blr
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- cmpwi r0,0
- add r0,r0,r11
- stw r4,0(r3)
- beq- 5f
- stw r0,0(r4)
-5: bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(__bss_end)
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
-
- mr r3, r9 /* Global Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mtlr r4 /* restore link register */
- blr
diff --git a/arch/powerpc/cpu/mpc8xx/traps.c b/arch/powerpc/cpu/mpc8xx/traps.c
deleted file mode 100644
index 01f24ac1a9..0000000000
--- a/arch/powerpc/cpu/mpc8xx/traps.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * linux/arch/powerpc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#define END_OF_MEM 0x02000000
-
-/*
- * Trap & Exception support
- */
-
-static void print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- printf("\n");
-}
-
-void show_regs(struct pt_regs *regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0)
- {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7)
- {
- printf("\n");
- }
- }
-}
-
-
-static void _exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-void MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Machine check in kernel mode.\n");
- printf("Caused by (from msr): ");
- printf("regs %p ",regs);
- switch( regs->msr & 0x000F0000) {
- case (0x80000000>>12):
- printf("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
- break;
- case (0x80000000>>13):
- printf("Transfer error ack signal\n");
- break;
- case (0x80000000>>14):
- printf("Data parity signal\n");
- break;
- case (0x80000000>>15):
- printf("Address parity signal\n");
- break;
- default:
- printf("Unknown values in msr\n");
- }
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("machine check");
-}
-
-void AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void ProgramCheckException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Software Emulation Exception");
-}
-
-
-void UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-void DebugException(struct pt_regs *regs)
-{
- printf("Debugger trap at @ %lx\n", regs->nip );
- show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint( regs );
-#endif
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int addr_probe(uint *addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__( \
- "1: lwz %0,0(%1)\n" \
- " eieio\n" \
- " li %0,0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: li %0,-1\n" \
- " b 2b\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 1b,3b\n" \
- ".text" \
- : "=r" (retval) : "r"(addr));
-
- return (retval);
-#endif
- return 0;
-}
diff --git a/arch/powerpc/cpu/mpc8xx/upatch.c b/arch/powerpc/cpu/mpc8xx/upatch.c
deleted file mode 100644
index a8cb735ab7..0000000000
--- a/arch/powerpc/cpu/mpc8xx/upatch.c
+++ /dev/null
@@ -1,194 +0,0 @@
-#include <common.h>
-#include <commproc.h>
-
-#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
- defined(CONFIG_SYS_SMC_UCODE_PATCH)
-
-static void UcodeCopy (volatile cpm8xx_t *cpm);
-
-void cpm_load_patch (volatile immap_t *immr)
-{
- immr->im_cpm.cp_rccr &= ~0x0003; /* Disable microcode program area */
-
- UcodeCopy ((cpm8xx_t *)&immr->im_cpm); /* Copy ucode patch to DPRAM */
-#ifdef CONFIG_SYS_SPI_UCODE_PATCH
- {
- volatile spi_t *spi = (spi_t *) & immr->im_cpm.cp_dparam[PROFF_SPI];
- /* Activate the microcode per the instructions in the microcode manual */
- /* NOTE: We're only relocating the SPI parameters (not I2C). */
- immr->im_cpm.cp_cpmcr1 = 0x802a; /* Write Trap register 1 value */
- immr->im_cpm.cp_cpmcr2 = 0x8028; /* Write Trap register 2 value */
- spi->spi_rpbase = CONFIG_SYS_SPI_DPMEM_OFFSET; /* Where to relocte SPI params */
- }
-#endif
-
-#ifdef CONFIG_SYS_I2C_UCODE_PATCH
- {
- volatile iic_t *iip = (iic_t *) & immr->im_cpm.cp_dparam[PROFF_IIC];
- /* Activate the microcode per the instructions in the microcode manual */
- /* NOTE: We're only relocating the I2C parameters (not SPI). */
- immr->im_cpm.cp_cpmcr3 = 0x802e; /* Write Trap register 3 value */
- immr->im_cpm.cp_cpmcr4 = 0x802c; /* Write Trap register 4 value */
- iip->iic_rpbase = CONFIG_SYS_I2C_DPMEM_OFFSET; /* Where to relocte I2C params */
- }
-#endif
-
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- {
- volatile smc_uart_t *up = (smc_uart_t *) & immr->im_cpm.cp_dparam[PROFF_SMC1];
- /* Activate the microcode per the instructions in the microcode manual */
- /* NOTE: We're only relocating the SMC parameters. */
- immr->im_cpm.cp_cpmcr1 = 0x8080; /* Write Trap register 1 value */
- immr->im_cpm.cp_cpmcr2 = 0x8088; /* Write Trap register 2 value */
- up->smc_rpbase = CONFIG_SYS_SMC_DPMEM_OFFSET; /* Where to relocte SMC params */
- }
-#endif
-
- /*
- * Enable DPRAM microcode to execute from the first 512 bytes
- * and a 256 byte extension of DPRAM.
- */
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- immr->im_cpm.cp_rccr |= 0x0002;
-#else
- immr->im_cpm.cp_rccr |= 0x0001;
-#endif
-}
-
-#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCh)
-static ulong patch_2000[] = {
- 0x7FFFEFD9, 0x3FFD0000, 0x7FFB49F7, 0x7FF90000,
- 0x5FEFADF7, 0x5F88ADF7, 0x5FEFAFF7, 0x5F88AFF7,
- 0x3A9CFBC8, 0x77CAE1BB, 0xF4DE7FAD, 0xABAE9330,
- 0x4E08FDCF, 0x6E0FAFF8, 0x7CCF76CF, 0xFDAFF9CF,
- 0xABF88DC8, 0xAB5879F7, 0xB0927383, 0xDFD079F7,
- 0xB090E6BB, 0xE5BBE74F, 0xB3FA6F0F, 0x6FFB76CE,
- 0xEE0CF9CF, 0x2BFBEFEF, 0xCFEEF9CF, 0x76CEAD23,
- 0x90B3DF99, 0x7FDDD0C1, 0x4BF847FD, 0x7CCF76CE,
- 0xCFEF77CA, 0x7EAF7FAD, 0x7DFDF0B7, 0xEF7A7FCA,
- 0x77CAFBC8, 0x6079E722, 0xFBC85FFF, 0xDFFF5FB3,
- 0xFFFBFBC8, 0xF3C894A5, 0xE7C9EDF9, 0x7F9A7FAD,
- 0x5F36AFE8, 0x5F5BFFDF, 0xDF95CB9E, 0xAF7D5FC3,
- 0xAFED8C1B, 0x5FC3AFDD, 0x5FC5DF99, 0x7EFDB0B3,
- 0x5FB3FFFE, 0xABAE5FB3, 0xFFFE5FD0, 0x600BE6BB,
- 0x600B5FD0, 0xDFC827FB, 0xEFDF5FCA, 0xCFDE3A9C,
- 0xE7C9EDF9, 0xF3C87F9E, 0x54CA7FED, 0x2D3A3637,
- 0x756F7E9A, 0xF1CE37EF, 0x2E677FEE, 0x10EBADF8,
- 0xEFDECFEA, 0xE52F7D9F, 0xE12BF1CE, 0x5F647E9A,
- 0x4DF8CFEA, 0x5F717D9B, 0xEFEECFEA, 0x5F73E522,
- 0xEFDE5F73, 0xCFDA0B61, 0x7385DF61, 0xE7C9EDF9,
- 0x7E9A30D5, 0x1458BFFF, 0xF3C85FFF, 0xDFFFA7F8,
- 0x5F5BBFFE, 0x7F7D10D0, 0x144D5F33, 0xBFFFAF78,
- 0x5F5BBFFD, 0xA7F85F33, 0xBFFE77FD, 0x30BD4E08,
- 0xFDCFE5FF, 0x6E0FAFF8, 0x7EEF7E9F, 0xFDEFF1CF,
- 0x5F17ABF8, 0x0D5B5F5B, 0xFFEF79F7, 0x309EAFDD,
- 0x5F3147F8, 0x5F31AFED, 0x7FDD50AF, 0x497847FD,
- 0x7F9E7FED, 0x7DFD70A9, 0xEF7E7ECE, 0x6BA07F9E,
- 0x2D227EFD, 0x30DB5F5B, 0xFFFD5F5B, 0xFFEF5F5B,
- 0xFFDF0C9C, 0xAFED0A9A, 0xAFDD0C37, 0x5F37AFBD,
- 0x7FBDB081, 0x5F8147F8,
-};
-
-static ulong patch_2F00[] = {
- 0x3E303430, 0x34343737, 0xABBF9B99, 0x4B4FBDBD,
- 0x59949334, 0x9FFF37FB, 0x9B177DD9, 0x936956BB,
- 0xFBDD697B, 0xDD2FD113, 0x1DB9F7BB, 0x36313963,
- 0x79373369, 0x3193137F, 0x7331737A, 0xF7BB9B99,
- 0x9BB19795, 0x77FDFD3D, 0x573B773F, 0x737933F7,
- 0xB991D115, 0x31699315, 0x31531694, 0xBF4FBDBD,
- 0x35931497, 0x35376956, 0xBD697B9D, 0x96931313,
- 0x19797937, 0x69350000,
-};
-#else
-
-static ulong patch_2000[] = {
- 0x3fff0000, 0x3ffd0000, 0x3ffb0000, 0x3ff90000,
- 0x5fefeff8, 0x5f91eff8, 0x3ff30000, 0x3ff10000,
- 0x3a11e710, 0xedf0ccb9, 0xf318ed66, 0x7f0e5fe2,
- 0x7fedbb38, 0x3afe7468, 0x7fedf4d8, 0x8ffbb92d,
- 0xb83b77fd, 0xb0bb5eb9, 0xdfda7fed, 0x90bde74d,
- 0x6f0dcbd3, 0xe7decfed, 0xcb50cfed, 0xcfeddf6d,
- 0x914d4f74, 0x5eaedfcb, 0x9ee0e7df, 0xefbb6ffb,
- 0xe7ef7f0e, 0x9ee57fed, 0xebb7effa, 0xeb30affb,
- 0x7fea90b3, 0x7e0cf09f, 0xbffff318, 0x5fffdfff,
- 0xac35efea, 0x7fce1fc1, 0xe2ff5fbd, 0xaffbe2ff,
- 0x5fbfaffb, 0xf9a87d0f, 0xaef8770f, 0x7d0fb0a2,
- 0xeffbbfff, 0xcfef5fba, 0x7d0fbfff, 0x5fba4cf8,
- 0x7fddd09b, 0x49f847fd, 0x7efdf097, 0x7fedfffd,
- 0x7dfdf093, 0xef7e7e1e, 0x5fba7f0e, 0x3a11e710,
- 0xedf0cc87, 0xfb18ad0a, 0x1f85bbb8, 0x74283b7e,
- 0x7375e4bb, 0x2ab64fb8, 0x5c7de4bb, 0x32fdffbf,
- 0x5f0843f8, 0x7ce3e1bb, 0xe74f7ded, 0x6f0f4fe8,
- 0xc7ba32be, 0x73f2efeb, 0x600b4f78, 0xe5bb760b,
- 0x5388aef8, 0x4ef80b6a, 0xcfef9ee5, 0xabf8751f,
- 0xefef5b88, 0x741f4fe8, 0x751e760d, 0x7fdb70dd,
- 0x741cafce, 0xefcc7fce, 0x751e7088, 0x741ce7bb,
- 0x334ecfed, 0xafdbefeb, 0xe5bb760b, 0x53ceaef8,
- 0xafe8e7eb, 0x4bf8771e, 0x7e007fed, 0x4fcbe2cc,
- 0x7fbc3085, 0x7b0f7a0f, 0x34b177fd, 0xb0e75e93,
- 0xdf313e3b, 0xaf78741f, 0x741f30cc, 0xcfef5f08,
- 0x741f3e88, 0xafb8771e, 0x5f437fed, 0x0bafe2cc,
- 0x741ccfec, 0xe5ca53a9, 0x6fcb4f74, 0x5e89df27,
- 0x2a923d14, 0x4b8fdf0c, 0x751f741c, 0x6c1eeffa,
- 0xefea7fce, 0x6ffc309a, 0xefec3fca, 0x308fdf0a,
- 0xadf85e7a, 0xaf7daefd, 0x5e7adf0a, 0x5e7aafdd,
- 0x761f1088, 0x1e7c7efd, 0x3089fffe, 0x4908fb18,
- 0x5fffdfff, 0xafbbf0f7, 0x4ef85f43, 0xadf81489,
- 0x7a0f7089, 0xcfef5089, 0x7a0fdf0c, 0x5e7cafed,
- 0xbc6e780f, 0xefef780f, 0xefef790f, 0xa7f85eeb,
- 0xffef790f, 0xefef790f, 0x1489df0a, 0x5e7aadfd,
- 0x5f09fffb, 0xe79aded9, 0xeff96079, 0x607ae79a,
- 0xded8eff9, 0x60795edb, 0x607acfef, 0xefefefdf,
- 0xefbfef7f, 0xeeffedff, 0xebffe7ff, 0xafefafdf,
- 0xafbfaf7f, 0xaeffadff, 0xabffa7ff, 0x6fef6fdf,
- 0x6fbf6f7f, 0x6eff6dff, 0x6bff67ff, 0x2fef2fdf,
- 0x2fbf2f7f, 0x2eff2dff, 0x2bff27ff, 0x4e08fd1f,
- 0xe5ff6e0f, 0xaff87eef, 0x7e0ffdef, 0xf11f6079,
- 0xabf8f51e, 0x7e0af11c, 0x37cfae16, 0x7fec909a,
- 0xadf8efdc, 0xcfeae52f, 0x7d0fe12b, 0xf11c6079,
- 0x7e0a4df8, 0xcfea5ea0, 0x7d0befec, 0xcfea5ea2,
- 0xe522efdc, 0x5ea2cfda, 0x4e08fd1f, 0x6e0faff8,
- 0x7c1f761f, 0xfdeff91f, 0x6079abf8, 0x761cee00,
- 0xf91f2bfb, 0xefefcfec, 0xf91f6079, 0x761c27fb,
- 0xefdf5e83, 0xcfdc7fdd, 0x50f84bf8, 0x47fd7c1f,
- 0x761ccfcf, 0x7eef7fed, 0x7dfd70ef, 0xef7e7f1e,
- 0x771efb18, 0x6079e722, 0xe6bbe5bb, 0x2e66e5bb,
- 0x600b2ee1, 0xe2bbe2bb, 0xe2bbe2bb, 0x2f5ee2bb,
- 0xe2bb2ff9, 0x6079e2bb,
-};
-
-static ulong patch_2F00[] = {
- 0x30303030, 0x3e3e3030, 0xaf79b9b3, 0xbaa3b979,
- 0x9693369f, 0x79f79777, 0x97333fff, 0xfb3b9e9f,
- 0x79b91d11, 0x9e13f3ff, 0x3f9b6bd9, 0xe173d136,
- 0x695669d1, 0x697b3daf, 0x79b93a3a, 0x3f979f91,
- 0x379ff976, 0xf99777fd, 0x9779737d, 0xe9d6bbf9,
- 0xbfffd9df, 0x97f7fd97, 0x6f7b9bff, 0xf9bd9683,
- 0x397db973, 0xd97b3b9f, 0xd7f9f733, 0x9993bb9e,
- 0xe1f9ef93, 0x73773337, 0xb936917d, 0x11f87379,
- 0xb979d336, 0x8b7ded73, 0x1b7d9337, 0x31f3f22f,
- 0x3f2327ee, 0xeeeeeeee, 0xeeeeeeee, 0xeeeeeeee,
- 0xeeeeee4b, 0xf4fbdbd2, 0x58bb1878, 0x577fdfd2,
- 0xd573b773, 0xf7374b4f, 0xbdbd25b8, 0xb177d2d1,
- 0x7376856b, 0xbfdd687b, 0xdd2fff8f, 0x78ffff8f,
- 0xf22f0000,
-};
-#endif
-
-static void UcodeCopy (volatile cpm8xx_t *cpm)
-{
- vu_long *p;
- int i;
-
- p = (vu_long *)&(cpm->cp_dpmem[0x0000]);
- for (i=0; i < sizeof(patch_2000)/4; ++i) {
- p[i] = patch_2000[i];
- }
-
- p = (vu_long *)&(cpm->cp_dpmem[0x0F00]);
- for (i=0; i < sizeof(patch_2F00)/4; ++i) {
- p[i] = patch_2F00[i];
- }
-}
-
-#endif /* CONFIG_SYS_I2C_UCODE_PATCH, CONFIG_SYS_SPI_UCODE_PATCH */
diff --git a/arch/powerpc/cpu/mpc8xx/video.c b/arch/powerpc/cpu/mpc8xx/video.c
deleted file mode 100644
index c35406d37b..0000000000
--- a/arch/powerpc/cpu/mpc8xx/video.c
+++ /dev/null
@@ -1,1123 +0,0 @@
-/*
- * (C) Copyright 2000
- * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
- * (C) Copyright 2002
- * Wolfgang Denk, wd@denx.de
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* #define DEBUG */
-
-/************************************************************************/
-/* ** HEADER FILES */
-/************************************************************************/
-
-#include <stdarg.h>
-#include <common.h>
-#include <config.h>
-#include <version.h>
-#include <i2c.h>
-#include <linux/types.h>
-#include <stdio_dev.h>
-
-#ifdef CONFIG_VIDEO
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/************************************************************************/
-/* ** DEBUG SETTINGS */
-/************************************************************************/
-
-#if 0
-#define VIDEO_DEBUG_COLORBARS /* Force colorbars output */
-#endif
-
-/************************************************************************/
-/* ** VIDEO MODE SETTINGS */
-/************************************************************************/
-
-#if 0
-#define VIDEO_MODE_EXTENDED /* Allow screen size bigger than visible area */
-#define VIDEO_MODE_NTSC
-#endif
-
-#define VIDEO_MODE_PAL
-
-#if 0
-#define VIDEO_BLINK /* This enables cursor blinking (under construction) */
-#endif
-
-#define VIDEO_INFO /* Show U-Boot information */
-#define VIDEO_INFO_X VIDEO_LOGO_WIDTH+8
-#define VIDEO_INFO_Y 16
-
-/************************************************************************/
-/* ** VIDEO MODE CONSTANTS */
-/************************************************************************/
-
-#ifdef VIDEO_MODE_EXTENDED
-#define VIDEO_COLS VIDEO_ACTIVE_COLS
-#define VIDEO_ROWS VIDEO_ACTIVE_ROWS
-#else
-#define VIDEO_COLS VIDEO_VISIBLE_COLS
-#define VIDEO_ROWS VIDEO_VISIBLE_ROWS
-#endif
-
-#define VIDEO_PIXEL_SIZE (VIDEO_MODE_BPP/8)
-#define VIDEO_SIZE (VIDEO_ROWS*VIDEO_COLS*VIDEO_PIXEL_SIZE) /* Total size of buffer */
-#define VIDEO_PIX_BLOCKS (VIDEO_SIZE >> 2) /* Number of ints */
-#define VIDEO_LINE_LEN (VIDEO_COLS*VIDEO_PIXEL_SIZE) /* Number of bytes per line */
-#define VIDEO_BURST_LEN (VIDEO_COLS/8)
-
-#ifdef VIDEO_MODE_YUYV
-#define VIDEO_BG_COL 0x80D880D8 /* Background color in YUYV format */
-#else
-#define VIDEO_BG_COL 0xF8F8F8F8 /* Background color in RGB format */
-#endif
-
-/************************************************************************/
-/* ** FONT AND LOGO DATA */
-/************************************************************************/
-
-#include <video_font.h> /* Get font data, width and height */
-
-#ifdef CONFIG_VIDEO_LOGO
-#include <video_logo.h> /* Get logo data, width and height */
-
-#define VIDEO_LOGO_WIDTH DEF_U_BOOT_LOGO_WIDTH
-#define VIDEO_LOGO_HEIGHT DEF_U_BOOT_LOGO_HEIGHT
-#define VIDEO_LOGO_ADDR &u_boot_logo
-#endif
-
-/************************************************************************/
-/* ** VIDEO CONTROLLER CONSTANTS */
-/************************************************************************/
-
-/* VCCR - VIDEO CONTROLLER CONFIGURATION REGISTER */
-
-#define VIDEO_VCCR_VON 0 /* Video controller ON */
-#define VIDEO_VCCR_CSRC 1 /* Clock source */
-#define VIDEO_VCCR_PDF 13 /* Pixel display format */
-#define VIDEO_VCCR_IEN 11 /* Interrupt enable */
-
-/* VSR - VIDEO STATUS REGISTER */
-
-#define VIDEO_VSR_CAS 6 /* Active set */
-#define VIDEO_VSR_EOF 0 /* End of frame */
-
-/* VCMR - VIDEO COMMAND REGISTER */
-
-#define VIDEO_VCMR_BD 0 /* Blank display */
-#define VIDEO_VCMR_ASEL 1 /* Active set selection */
-
-/* VBCB - VIDEO BACKGROUND COLOR BUFFER REGISTER */
-
-#define VIDEO_BCSR4_RESET_BIT 21 /* BCSR4 - Extern video encoder reset */
-#define VIDEO_BCSR4_EXTCLK_BIT 22 /* BCSR4 - Extern clock enable */
-#define VIDEO_BCSR4_VIDLED_BIT 23 /* BCSR4 - Video led disable */
-
-/************************************************************************/
-/* ** CONSOLE CONSTANTS */
-/************************************************************************/
-
-#ifdef CONFIG_VIDEO_LOGO
-#define CONSOLE_ROWS ((VIDEO_ROWS - VIDEO_LOGO_HEIGHT) / VIDEO_FONT_HEIGHT)
-#define VIDEO_LOGO_SKIP (VIDEO_COLS - VIDEO_LOGO_WIDTH)
-#else
-#define CONSOLE_ROWS (VIDEO_ROWS / VIDEO_FONT_HEIGHT)
-#endif
-
-#define CONSOLE_COLS (VIDEO_COLS / VIDEO_FONT_WIDTH)
-#define CONSOLE_ROW_SIZE (VIDEO_FONT_HEIGHT * VIDEO_LINE_LEN)
-#define CONSOLE_ROW_FIRST (video_console_address)
-#define CONSOLE_ROW_SECOND (video_console_address + CONSOLE_ROW_SIZE)
-#define CONSOLE_ROW_LAST (video_console_address + CONSOLE_SIZE - CONSOLE_ROW_SIZE)
-#define CONSOLE_SIZE (CONSOLE_ROW_SIZE * CONSOLE_ROWS)
-#define CONSOLE_SCROLL_SIZE (CONSOLE_SIZE - CONSOLE_ROW_SIZE)
-
-/*
- * Simple color definitions
- */
-#define CONSOLE_COLOR_BLACK 0
-#define CONSOLE_COLOR_RED 1
-#define CONSOLE_COLOR_GREEN 2
-#define CONSOLE_COLOR_YELLOW 3
-#define CONSOLE_COLOR_BLUE 4
-#define CONSOLE_COLOR_MAGENTA 5
-#define CONSOLE_COLOR_CYAN 6
-#define CONSOLE_COLOR_GREY 13
-#define CONSOLE_COLOR_GREY2 14
-#define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */
-
-/************************************************************************/
-/* ** BITOPS MACROS */
-/************************************************************************/
-
-#define HISHORT(i) ((i >> 16)&0xffff)
-#define LOSHORT(i) (i & 0xffff)
-#define HICHAR(s) ((i >> 8)&0xff)
-#define LOCHAR(s) (i & 0xff)
-#define HI(c) ((c >> 4)&0xf)
-#define LO(c) (c & 0xf)
-#define SWAPINT(i) (HISHORT(i) | (LOSHORT(i) << 16))
-#define SWAPSHORT(s) (HICHAR(s) | (LOCHAR(s) << 8))
-#define SWAPCHAR(c) (HI(c) | (LO(c) << 4))
-#define BITMASK(b) (1 << (b))
-#define GETBIT(v,b) (((v) & BITMASK(b)) > 0)
-#define SETBIT(v,b,d) (v = (((d)>0) ? (v) | BITMASK(b): (v) & ~BITMASK(b)))
-
-/************************************************************************/
-/* ** STRUCTURES */
-/************************************************************************/
-
-typedef struct {
- unsigned char V, Y1, U, Y2;
-} tYUYV;
-
-/* This structure is based on the Video Ram in the MPC823. */
-typedef struct VRAM {
- unsigned hx:2, /* Horizontal sync */
- vx:2, /* Vertical sync */
- fx:2, /* Frame */
- bx:2, /* Blank */
- res1:6, /* Reserved */
- vds:2, /* Video Data Select */
- inter:1, /* Interrupt */
- res2:2, /* Reserved */
- lcyc:11, /* Loop/video cycles */
- lp:1, /* Loop start/end */
- lst:1; /* Last entry */
-} VRAM;
-
-/************************************************************************/
-/* ** VARIABLES */
-/************************************************************************/
-
-static int
- video_panning_range_x = 0, /* Video mode invisible pixels x range */
- video_panning_range_y = 0, /* Video mode invisible pixels y range */
- video_panning_value_x = 0, /* Video mode x panning value (absolute) */
- video_panning_value_y = 0, /* Video mode y panning value (absolute) */
- video_panning_factor_x = 0, /* Video mode x panning value (-127 +127) */
- video_panning_factor_y = 0, /* Video mode y panning value (-127 +127) */
- console_col = 0, /* Cursor col */
- console_row = 0, /* Cursor row */
- video_palette[16]; /* Our palette */
-
-static const int video_font_draw_table[] =
- { 0x00000000, 0x0000ffff, 0xffff0000, 0xffffffff };
-
-static char
- video_color_fg = 0, /* Current fg color index (0-15) */
- video_color_bg = 0, /* Current bg color index (0-15) */
- video_enable = 0; /* Video has been initialized? */
-
-static void
- *video_fb_address, /* Frame buffer address */
- *video_console_address; /* Console frame buffer start address */
-
-/************************************************************************/
-/* ** MEMORY FUNCTIONS (32bit) */
-/************************************************************************/
-
-static void memsetl (int *p, int c, int v)
-{
- while (c--)
- *(p++) = v;
-}
-
-static void memcpyl (int *d, int *s, int c)
-{
- while (c--)
- *(d++) = *(s++);
-}
-
-/************************************************************************/
-/* ** VIDEO DRAWING AND COLOR FUNCTIONS */
-/************************************************************************/
-
-static int video_maprgb (int r, int g, int b)
-{
-#ifdef VIDEO_MODE_YUYV
- unsigned int pR, pG, pB;
- tYUYV YUYV;
- unsigned int *ret = (unsigned int *) &YUYV;
-
- /* Transform (0-255) components to (0-100) */
-
- pR = r * 100 / 255;
- pG = g * 100 / 255;
- pB = b * 100 / 255;
-
- /* Calculate YUV values (0-255) from RGB beetween 0-100 */
-
- YUYV.Y1 = YUYV.Y2 = 209 * (pR + pG + pB) / 300 + 16;
- YUYV.U = pR - (pG * 3 / 4) - (pB / 4) + 128;
- YUYV.V = pB - (pR / 4) - (pG * 3 / 4) + 128;
- return *ret;
-#endif
-#ifdef VIDEO_MODE_RGB
- return ((r >> 3) << 11) | ((g > 2) << 6) | (b >> 3);
-#endif
-}
-
-static void video_setpalette (int color, int r, int g, int b)
-{
- color &= 0xf;
-
- video_palette[color] = video_maprgb (r, g, b);
-
- /* Swap values if our panning offset is odd */
- if (video_panning_value_x & 1)
- video_palette[color] = SWAPINT (video_palette[color]);
-}
-
-static void video_fill (int color)
-{
- memsetl (video_fb_address, VIDEO_PIX_BLOCKS, color);
-}
-
-static void video_setfgcolor (int i)
-{
- video_color_fg = i & 0xf;
-}
-
-static void video_setbgcolor (int i)
-{
- video_color_bg = i & 0xf;
-}
-
-static int video_pickcolor (int i)
-{
- return video_palette[i & 0xf];
-}
-
-/* Absolute console plotting functions */
-
-#ifdef VIDEO_BLINK
-static void video_revchar (int xx, int yy)
-{
- int rows;
- u8 *dest;
-
- dest = video_fb_address + yy * VIDEO_LINE_LEN + xx * 2;
-
- for (rows = VIDEO_FONT_HEIGHT; rows--; dest += VIDEO_LINE_LEN) {
- switch (VIDEO_FONT_WIDTH) {
- case 16:
- ((u32 *) dest)[6] ^= 0xffffffff;
- ((u32 *) dest)[7] ^= 0xffffffff;
- /* FALL THROUGH */
- case 12:
- ((u32 *) dest)[4] ^= 0xffffffff;
- ((u32 *) dest)[5] ^= 0xffffffff;
- /* FALL THROUGH */
- case 8:
- ((u32 *) dest)[2] ^= 0xffffffff;
- ((u32 *) dest)[3] ^= 0xffffffff;
- /* FALL THROUGH */
- case 4:
- ((u32 *) dest)[0] ^= 0xffffffff;
- ((u32 *) dest)[1] ^= 0xffffffff;
- }
- }
-}
-#endif
-
-static void video_drawchars (int xx, int yy, unsigned char *s, int count)
-{
- u8 *cdat, *dest, *dest0;
- int rows, offset, c;
- u32 eorx, fgx, bgx;
-
- offset = yy * VIDEO_LINE_LEN + xx * 2;
- dest0 = video_fb_address + offset;
-
- fgx = video_pickcolor (video_color_fg);
- bgx = video_pickcolor (video_color_bg);
-
- if (xx & 1) {
- fgx = SWAPINT (fgx);
- bgx = SWAPINT (bgx);
- }
-
- eorx = fgx ^ bgx;
-
- switch (VIDEO_FONT_WIDTH) {
- case 4:
- case 8:
- while (count--) {
- c = *s;
- cdat = video_fontdata + c * VIDEO_FONT_HEIGHT;
- for (rows = VIDEO_FONT_HEIGHT, dest = dest0;
- rows--;
- dest += VIDEO_LINE_LEN) {
- u8 bits = *cdat++;
-
- ((u32 *) dest)[0] =
- (video_font_draw_table[bits >> 6] & eorx) ^ bgx;
- ((u32 *) dest)[1] =
- (video_font_draw_table[bits >> 4 & 3] & eorx) ^ bgx;
- if (VIDEO_FONT_WIDTH == 8) {
- ((u32 *) dest)[2] =
- (video_font_draw_table[bits >> 2 & 3] & eorx) ^ bgx;
- ((u32 *) dest)[3] =
- (video_font_draw_table[bits & 3] & eorx) ^ bgx;
- }
- }
- dest0 += VIDEO_FONT_WIDTH * 2;
- s++;
- }
- break;
- case 12:
- case 16:
- while (count--) {
- cdat = video_fontdata + (*s) * (VIDEO_FONT_HEIGHT << 1);
- for (rows = VIDEO_FONT_HEIGHT, dest = dest0; rows--;
- dest += VIDEO_LINE_LEN) {
- u8 bits = *cdat++;
-
- ((u32 *) dest)[0] =
- (video_font_draw_table[bits >> 6] & eorx) ^ bgx;
- ((u32 *) dest)[1] =
- (video_font_draw_table[bits >> 4 & 3] & eorx) ^ bgx;
- ((u32 *) dest)[2] =
- (video_font_draw_table[bits >> 2 & 3] & eorx) ^ bgx;
- ((u32 *) dest)[3] =
- (video_font_draw_table[bits & 3] & eorx) ^ bgx;
- bits = *cdat++;
- ((u32 *) dest)[4] =
- (video_font_draw_table[bits >> 6] & eorx) ^ bgx;
- ((u32 *) dest)[5] =
- (video_font_draw_table[bits >> 4 & 3] & eorx) ^ bgx;
- if (VIDEO_FONT_WIDTH == 16) {
- ((u32 *) dest)[6] =
- (video_font_draw_table[bits >> 2 & 3] & eorx) ^ bgx;
- ((u32 *) dest)[7] =
- (video_font_draw_table[bits & 3] & eorx) ^ bgx;
- }
- }
- s++;
- dest0 += VIDEO_FONT_WIDTH * 2;
- }
- break;
- }
-}
-
-static inline void video_drawstring (int xx, int yy, char *s)
-{
- video_drawchars (xx, yy, (unsigned char *)s, strlen (s));
-}
-
-/* Relative to console plotting functions */
-
-static void video_putchars (int xx, int yy, unsigned char *s, int count)
-{
-#ifdef CONFIG_VIDEO_LOGO
- video_drawchars (xx, yy + VIDEO_LOGO_HEIGHT, s, count);
-#else
- video_drawchars (xx, yy, s, count);
-#endif
-}
-
-static void video_putchar (int xx, int yy, unsigned char c)
-{
-#ifdef CONFIG_VIDEO_LOGO
- video_drawchars (xx, yy + VIDEO_LOGO_HEIGHT, &c, 1);
-#else
- video_drawchars (xx, yy, &c, 1);
-#endif
-}
-
-static inline void video_putstring (int xx, int yy, unsigned char *s)
-{
- video_putchars (xx, yy, (unsigned char *)s, strlen ((char *)s));
-}
-
-/************************************************************************/
-/* ** VIDEO CONTROLLER LOW-LEVEL FUNCTIONS */
-/************************************************************************/
-
-static void video_mode_dupefield (VRAM * source, VRAM * dest, int entries)
-{
- int i;
-
- for (i = 0; i < entries; i++) {
- dest[i] = source[i]; /* Copy the entire record */
- dest[i].fx = (!dest[i].fx) * 3; /* Negate field bit */
- }
-
- dest[0].lcyc++; /* Add a cycle to the first entry */
- dest[entries - 1].lst = 1; /* Set end of ram entries */
-}
-
-static void inline video_mode_addentry (VRAM * vr,
- int Hx, int Vx, int Fx, int Bx,
- int VDS, int INT, int LCYC, int LP, int LST)
-{
- vr->hx = Hx;
- vr->vx = Vx;
- vr->fx = Fx;
- vr->bx = Bx;
- vr->vds = VDS;
- vr->inter = INT;
- vr->lcyc = LCYC;
- vr->lp = LP;
- vr->lst = LST;
-}
-
-#define ADDENTRY(a,b,c,d,e,f,g,h,i) video_mode_addentry(&vr[entry++],a,b,c,d,e,f,g,h,i)
-
-static int video_mode_generate (void)
-{
- immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- VRAM *vr = (VRAM *) (((void *) immap) + 0xb00); /* Pointer to the VRAM table */
- int DX, X1, X2, DY, Y1, Y2, entry = 0, fifo;
-
- /* CHECKING PARAMETERS */
-
- if (video_panning_factor_y < -128)
- video_panning_factor_y = -128;
-
- if (video_panning_factor_y > 128)
- video_panning_factor_y = 128;
-
- if (video_panning_factor_x < -128)
- video_panning_factor_x = -128;
-
- if (video_panning_factor_x > 128)
- video_panning_factor_x = 128;
-
- /* Setting panning */
-
- DX = video_panning_range_x = (VIDEO_ACTIVE_COLS - VIDEO_COLS) * 2;
- DY = video_panning_range_y = (VIDEO_ACTIVE_ROWS - VIDEO_ROWS) / 2;
-
- video_panning_value_x = (video_panning_factor_x + 128) * DX / 256;
- video_panning_value_y = (video_panning_factor_y + 128) * DY / 256;
-
- /* We assume these are burst units (multiplied by 2, we need it pari) */
- X1 = video_panning_value_x & 0xfffe;
- X2 = DX - X1;
-
- /* We assume these are field line units (divided by 2, we need it pari) */
- Y1 = video_panning_value_y & 0xfffe;
- Y2 = DY - Y1;
-
- debug("X1=%d, X2=%d, Y1=%d, Y2=%d, DX=%d, DY=%d VIDEO_COLS=%d \n",
- X1, X2, Y1, Y2, DX, DY, VIDEO_COLS);
-
-#ifdef VIDEO_MODE_NTSC
-/*
- * Hx Vx Fx Bx VDS INT LCYC LP LST
- *
- * Retrace blanking
- */
- ADDENTRY (0, 0, 3, 0, 1, 0, 3, 1, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 243, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
-/*
- * Vertical blanking
- */
- ADDENTRY (0, 0, 0, 0, 1, 0, 18, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 243, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
-/*
- * Odd field active area (TOP)
- */
- if (Y1 > 0) {
- ADDENTRY (0, 0, 0, 0, 1, 0, Y1, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 235, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
- }
-/*
- * Odd field active area
- */
- ADDENTRY (0, 0, 0, 0, 1, 0, 240 - DY, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 235, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, 8 + X1, 0, 0);
- ADDENTRY (3, 0, 0, 3, 0, 0, VIDEO_COLS * 2, 0, 0);
-
- if (X2 > 0)
- ADDENTRY (3, 0, 0, 3, 1, 0, X2, 0, 0);
-
- ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
-
-/*
- * Odd field active area (BOTTOM)
- */
- if (Y1 > 0) {
- ADDENTRY (0, 0, 0, 0, 1, 0, Y2, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 235, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
- }
-/*
- * Vertical blanking
- */
- ADDENTRY (0, 0, 0, 0, 1, 0, 4, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 243, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
-/*
- * Vertical blanking
- */
- ADDENTRY (0, 0, 3, 0, 1, 0, 19, 1, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 243, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
-/*
- * Even field active area (TOP)
- */
- if (Y1 > 0) {
- ADDENTRY (0, 0, 3, 0, 1, 0, Y1, 1, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 235, 0, 0);
- ADDENTRY (3, 0, 3, 3, 1, 0, 1448, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
- }
-/*
- * Even field active area (CENTER)
- */
- ADDENTRY (0, 0, 3, 0, 1, 0, 240 - DY, 1, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 235, 0, 0);
- ADDENTRY (3, 0, 3, 3, 1, 0, 8 + X1, 0, 0);
- ADDENTRY (3, 0, 3, 3, 0, 0, VIDEO_COLS * 2, 0, 0);
-
- if (X2 > 0)
- ADDENTRY (3, 0, 3, 3, 1, 0, X2, 0, 0);
-
- ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
-/*
- * Even field active area (BOTTOM)
- */
- if (Y1 > 0) {
- ADDENTRY (0, 0, 3, 0, 1, 0, Y2, 1, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 235, 0, 0);
- ADDENTRY (3, 0, 3, 3, 1, 0, 1448, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
- }
-/*
- * Vertical blanking
- */
- ADDENTRY (0, 0, 3, 0, 1, 0, 1, 1, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 243, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 1, 32, 1, 1);
-#endif
-
-#ifdef VIDEO_MODE_PAL
-
-/*
- * Hx Vx Fx Bx VDS INT LCYC LP LST
- *
- * vertical; blanking
- */
- ADDENTRY (0, 0, 0, 0, 1, 0, 22, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 263, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
-/*
- * active area (TOP)
- */
- if (Y1 > 0) {
- ADDENTRY (0, 0, 0, 0, 1, 0, Y1, 1, 0); /* 11? */
- ADDENTRY (3, 0, 0, 0, 1, 0, 255, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
- }
-/*
- * field active area (CENTER)
- */
- ADDENTRY (0, 0, 0, 0, 1, 0, 288 - DY, 1, 0); /* 265? */
- ADDENTRY (3, 0, 0, 0, 1, 0, 255, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, 8 + X1, 0, 0);
- ADDENTRY (3, 0, 0, 3, 0, 0, VIDEO_COLS * 2, 0, 0);
-
- if (X2 > 0)
- ADDENTRY (3, 0, 0, 1, 1, 0, X2, 0, 0);
-
- ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
-/*
- * field active area (BOTTOM)
- */
- if (Y2 > 0) {
- ADDENTRY (0, 0, 0, 0, 1, 0, Y2, 1, 0); /* 12? */
- ADDENTRY (3, 0, 0, 0, 1, 0, 255, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
- }
-/*
- * field vertical; blanking
- */
- ADDENTRY (0, 0, 0, 0, 1, 0, 2, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 263, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
-/*
- * Create the other field (like this, but whit other field selected,
- * one more cycle loop and a last identifier)
- */
- video_mode_dupefield (vr, &vr[entry], entry);
-
-#endif /* VIDEO_MODE_PAL */
-
- /* See what FIFO are we using */
- fifo = GETBIT (immap->im_vid.vid_vsr, VIDEO_VSR_CAS);
-
- /* Set number of lines and burst (only one frame for now) */
- if (fifo) {
- immap->im_vid.vid_vfcr0 = VIDEO_BURST_LEN |
- (VIDEO_BURST_LEN << 8) | ((VIDEO_ROWS / 2) << 19);
- } else {
- immap->im_vid.vid_vfcr1 = VIDEO_BURST_LEN |
- (VIDEO_BURST_LEN << 8) | ((VIDEO_ROWS / 2) << 19);
- }
-
- SETBIT (immap->im_vid.vid_vcmr, VIDEO_VCMR_ASEL, !fifo);
-
-/*
- * Wait until changes are applied (not done)
- * while (GETBIT(immap->im_vid.vid_vsr, VIDEO_VSR_CAS) == fifo) ;
- */
-
- /* Return number of VRAM entries */
- return entry * 2;
-}
-
-static void video_encoder_init (void)
-{
- return;
-}
-
-static void video_ctrl_init (void *memptr)
-{
- immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- video_fb_address = memptr;
-
- /* Set background */
- debug ("[VIDEO CTRL] Setting background color...\n");
- immap->im_vid.vid_vbcb = VIDEO_BG_COL;
-
- /* Show the background */
- debug ("[VIDEO CTRL] Forcing background...\n");
- SETBIT (immap->im_vid.vid_vcmr, VIDEO_VCMR_BD, 1);
-
- /* Turn off video controller */
- debug ("[VIDEO CTRL] Turning off video controller...\n");
- SETBIT (immap->im_vid.vid_vccr, VIDEO_VCCR_VON, 0);
-
- /* Generate and make active a new video mode */
- debug ("[VIDEO CTRL] Generating video mode...\n");
- video_mode_generate ();
-
- /* Start of frame buffer (even and odd frame, to make it working with */
- /* any selected active set) */
- debug ("[VIDEO CTRL] Setting frame buffer address...\n");
- immap->im_vid.vid_vfaa1 =
- immap->im_vid.vid_vfaa0 = (u32) video_fb_address;
- immap->im_vid.vid_vfba1 =
- immap->im_vid.vid_vfba0 =
- (u32) video_fb_address + VIDEO_LINE_LEN;
-
- /* YUV, Big endian, SHIFT/CLK/CLK input (BEFORE ENABLING 27MHZ EXT CLOCK) */
- debug ("[VIDEO CTRL] Setting pixel mode and clocks...\n");
- immap->im_vid.vid_vccr = 0x2042;
-
- /* Configure port pins */
- debug ("[VIDEO CTRL] Configuring input/output pins...\n");
- immap->im_ioport.iop_pdpar = 0x1fff;
- immap->im_ioport.iop_pddir = 0x0000;
-
- /* Blanking the screen. */
- debug ("[VIDEO CTRL] Blanking the screen...\n");
- video_fill (VIDEO_BG_COL);
-
- /*
- * Turns on Aggressive Mode. Normally, turning on the caches
- * will cause the screen to flicker when the caches try to
- * fill. This gives the FIFO's for the Video Controller
- * higher priority and prevents flickering because of
- * underrun. This may still be an issue when using FLASH,
- * since accessing data from Flash is so slow.
- */
- debug ("[VIDEO CTRL] Turning on aggressive mode...\n");
- immap->im_siu_conf.sc_sdcr = 0x40;
-
- /* Turn on video controller */
- debug ("[VIDEO CTRL] Turning on video controller...\n");
- SETBIT (immap->im_vid.vid_vccr, VIDEO_VCCR_VON, 1);
-
- /* Show the display */
- debug ("[VIDEO CTRL] Enabling the video...\n");
- SETBIT (immap->im_vid.vid_vcmr, VIDEO_VCMR_BD, 0);
-}
-
-/************************************************************************/
-/* ** CONSOLE FUNCTIONS */
-/************************************************************************/
-
-static void console_scrollup (void)
-{
- /* Copy up rows ignoring the first one */
- memcpyl (CONSOLE_ROW_FIRST, CONSOLE_ROW_SECOND, CONSOLE_SCROLL_SIZE >> 2);
-
- /* Clear the last one */
- memsetl (CONSOLE_ROW_LAST, CONSOLE_ROW_SIZE >> 2, VIDEO_BG_COL);
-}
-
-static inline void console_back (void)
-{
- console_col--;
-
- if (console_col < 0) {
- console_col = CONSOLE_COLS - 1;
- console_row--;
- if (console_row < 0)
- console_row = 0;
- }
-
- video_putchar ( console_col * VIDEO_FONT_WIDTH,
- console_row * VIDEO_FONT_HEIGHT, ' ');
-}
-
-static inline void console_newline (void)
-{
- console_row++;
- console_col = 0;
-
- /* Check if we need to scroll the terminal */
- if (console_row >= CONSOLE_ROWS) {
- /* Scroll everything up */
- console_scrollup ();
-
- /* Decrement row number */
- console_row--;
- }
-}
-
-void video_putc(struct stdio_dev *dev, const char c)
-{
- if (!video_enable) {
- serial_putc (c);
- return;
- }
-
- switch (c) {
- case 13: /* Simply ignore this */
- break;
-
- case '\n': /* Next line, please */
- console_newline ();
- break;
-
- case 9: /* Tab (8 chars alignment) */
- console_col |= 0x0008; /* Next 8 chars boundary */
- console_col &= ~0x0007; /* Set this bit to zero */
-
- if (console_col >= CONSOLE_COLS)
- console_newline ();
- break;
-
- case 8: /* Eat last character */
- console_back ();
- break;
-
- default: /* Add to the console */
- video_putchar ( console_col * VIDEO_FONT_WIDTH,
- console_row * VIDEO_FONT_HEIGHT, c);
- console_col++;
- /* Check if we need to go to next row */
- if (console_col >= CONSOLE_COLS)
- console_newline ();
- }
-}
-
-void video_puts(struct stdio_dev *dev, const char *s)
-{
- int count = strlen (s);
-
- if (!video_enable)
- while (count--)
- serial_putc (*s++);
- else
- while (count--)
- video_putc(dev, *s++);
-}
-
-/************************************************************************/
-/* ** CURSOR BLINKING FUNCTIONS */
-/************************************************************************/
-
-#ifdef VIDEO_BLINK
-
-#define BLINK_TIMER_ID 0
-#define BLINK_TIMER_HZ 2
-
-static unsigned char blink_enabled = 0;
-static timer_t blink_timer;
-
-static void blink_update (void)
-{
- static int blink_row = -1, blink_col = -1, blink_old = 0;
-
- /* Check if we have a new position to invert */
- if ((console_row != blink_row) || (console_col != blink_col)) {
- /* Check if we need to reverse last character */
- if (blink_old)
- video_revchar ( blink_col * VIDEO_FONT_WIDTH,
- (blink_row
-#ifdef CONFIG_VIDEO_LOGO
- + VIDEO_LOGO_HEIGHT
-#endif
- ) * VIDEO_FONT_HEIGHT);
-
- /* Update values */
- blink_row = console_row;
- blink_col = console_col;
- blink_old = 0;
- }
-
-/* Reverse this character */
- blink_old = !blink_old;
- video_revchar ( console_col * VIDEO_FONT_WIDTH,
- (console_row
-#ifdef CONFIG_VIDEO_LOGO
- + VIDEO_LOGO_HEIGHT
-#endif
- ) * VIDEO_FONT_HEIGHT);
-
-}
-
-/*
- * Handler for blinking cursor
- */
-static void blink_handler (void *arg)
-{
-/* Blink */
- blink_update ();
-/* Ack the timer */
- timer_ack (&blink_timer);
-}
-
-int blink_set (int blink)
-{
- int ret = blink_enabled;
-
- if (blink)
- timer_enable (&blink_timer);
- else
- timer_disable (&blink_timer);
-
- blink_enabled = blink;
-
- return ret;
-}
-
-static inline void blink_close (void)
-{
- timer_close (&blink_timer);
-}
-
-static inline void blink_init (void)
-{
- timer_init (&blink_timer,
- BLINK_TIMER_ID, BLINK_TIMER_HZ,
- blink_handler);
-}
-#endif
-
-/************************************************************************/
-/* ** LOGO PLOTTING FUNCTIONS */
-/************************************************************************/
-
-#ifdef CONFIG_VIDEO_LOGO
-void easylogo_plot (fastimage_t * image, void *screen, int width, int x,
- int y)
-{
- int skip = width - image->width, xcount, ycount = image->height;
-
-#ifdef VIDEO_MODE_YUYV
- ushort *source = (ushort *) image->data;
- ushort *dest = (ushort *) screen + y * width + x;
-
- while (ycount--) {
- xcount = image->width;
- while (xcount--)
- *dest++ = *source++;
- dest += skip;
- }
-#endif
-#ifdef VIDEO_MODE_RGB
- unsigned char
- *source = (unsigned short *) image->data,
- *dest = (unsigned short *) screen + ((y * width) + x) * 3;
-
- while (ycount--) {
- xcount = image->width * 3;
- memcpy (dest, source, xcount);
- source += xcount;
- dest += ycount;
- }
-#endif
-}
-
-static void *video_logo (void)
-{
- u16 *screen = video_fb_address, width = VIDEO_COLS;
-#ifdef VIDEO_INFO
- char temp[32];
- char info[80];
-#endif /* VIDEO_INFO */
-
- easylogo_plot (VIDEO_LOGO_ADDR, screen, width, 0, 0);
-
-#ifdef VIDEO_INFO
- sprintf (info, "%s (%s - %s) ",
- U_BOOT_VERSION, U_BOOT_DATE, U_BOOT_TIME);
- video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y, info);
-
- strcpy(info, "(C) 2002 DENX Software Engineering");
- video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT,
- info);
-
- strcpy(info, " Wolfgang DENK, wd@denx.de");
- video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 2,
- info);
-
- /* leave one blank line */
-
- sprintf(info, "MPC823 CPU at %s MHz, %ld MiB RAM, %ld MiB Flash",
- strmhz(temp, gd->cpu_clk),
- gd->ram_size >> 20,
- gd->bd->bi_flashsize >> 20 );
- video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 4,
- info);
-#endif
-
- return video_fb_address + VIDEO_LOGO_HEIGHT * VIDEO_LINE_LEN;
-}
-#endif
-
-/************************************************************************/
-/* ** VIDEO HIGH-LEVEL FUNCTIONS */
-/************************************************************************/
-
-static int video_init (void *videobase)
-{
- /* Initialize the encoder */
- debug ("[VIDEO] Initializing video encoder...\n");
- video_encoder_init ();
-
- /* Initialize the video controller */
- debug ("[VIDEO] Initializing video controller at %08x...\n",
- (int) videobase);
- video_ctrl_init (videobase);
-
- /* Setting the palette */
- video_setpalette (CONSOLE_COLOR_BLACK, 0, 0, 0);
- video_setpalette (CONSOLE_COLOR_RED, 0xFF, 0, 0);
- video_setpalette (CONSOLE_COLOR_GREEN, 0, 0xFF, 0);
- video_setpalette (CONSOLE_COLOR_YELLOW, 0xFF, 0xFF, 0);
- video_setpalette (CONSOLE_COLOR_BLUE, 0, 0, 0xFF);
- video_setpalette (CONSOLE_COLOR_MAGENTA, 0xFF, 0, 0xFF);
- video_setpalette (CONSOLE_COLOR_CYAN, 0, 0xFF, 0xFF);
- video_setpalette (CONSOLE_COLOR_GREY, 0xAA, 0xAA, 0xAA);
- video_setpalette (CONSOLE_COLOR_GREY2, 0xF8, 0xF8, 0xF8);
- video_setpalette (CONSOLE_COLOR_WHITE, 0xFF, 0xFF, 0xFF);
-
-#ifndef CONFIG_SYS_WHITE_ON_BLACK
- video_setfgcolor (CONSOLE_COLOR_BLACK);
- video_setbgcolor (CONSOLE_COLOR_GREY2);
-#else
- video_setfgcolor (CONSOLE_COLOR_GREY2);
- video_setbgcolor (CONSOLE_COLOR_BLACK);
-#endif /* CONFIG_SYS_WHITE_ON_BLACK */
-
-#ifdef CONFIG_VIDEO_LOGO
- /* Paint the logo and retrieve tv base address */
- debug ("[VIDEO] Drawing the logo...\n");
- video_console_address = video_logo ();
-#else
- video_console_address = video_fb_address;
-#endif
-
-#ifdef VIDEO_BLINK
- /* Enable the blinking (under construction) */
- blink_init ();
- blink_set (0); /* To Fix! */
-#endif
-
- /* Initialize the console */
- console_col = 0;
- console_row = 0;
- video_enable = 1;
-
-#ifdef VIDEO_MODE_PAL
-# define VIDEO_MODE_TMP1 "PAL"
-#endif
-#ifdef VIDEO_MODE_NTSC
-# define VIDEO_MODE_TMP1 "NTSC"
-#endif
-#ifdef VIDEO_MODE_YUYV
-# define VIDEO_MODE_TMP2 "YCbYCr"
-#endif
-#ifdef VIDEO_MODE_RGB
-# define VIDEO_MODE_TMP2 "RGB"
-#endif
- debug ( VIDEO_MODE_TMP1
- " %dx%dx%d (" VIDEO_MODE_TMP2 ") on %s - console %dx%d\n",
- VIDEO_COLS, VIDEO_ROWS, VIDEO_MODE_BPP,
- VIDEO_ENCODER_NAME, CONSOLE_COLS, CONSOLE_ROWS);
- return 0;
-}
-
-int drv_video_init (void)
-{
- int error, devices = 1;
-
- struct stdio_dev videodev;
-
- video_init ((void *)(gd->fb_base)); /* Video initialization */
-
-/* Device initialization */
-
- memset (&videodev, 0, sizeof (videodev));
-
- strcpy (videodev.name, "video");
- videodev.flags = DEV_FLAGS_OUTPUT; /* Output only */
- videodev.putc = video_putc; /* 'putc' function */
- videodev.puts = video_puts; /* 'puts' function */
-
- error = stdio_register (&videodev);
-
- return (error == 0) ? devices : error;
-}
-
-/************************************************************************/
-/* ** ROM capable initialization part - needed to reserve FB memory */
-/************************************************************************/
-
-/*
- * This is called early in the system initialization to grab memory
- * for the video controller.
- * Returns new address for monitor, after reserving video buffer memory
- *
- * Note that this is running from ROM, so no write access to global data.
- */
-ulong video_setmem (ulong addr)
-{
- /* Allocate pages for the frame buffer. */
- addr -= VIDEO_SIZE;
-
- debug ("Reserving %dk for Video Framebuffer at: %08lx\n",
- VIDEO_SIZE>>10, addr);
-
- return (addr);
-}
-
-#endif
diff --git a/arch/powerpc/cpu/ppc4xx/4xx_uart.c b/arch/powerpc/cpu/ppc4xx/4xx_uart.c
index c02058f79b..bca839378d 100644
--- a/arch/powerpc/cpu/ppc4xx/4xx_uart.c
+++ b/arch/powerpc/cpu/ppc4xx/4xx_uart.c
@@ -9,7 +9,6 @@
*/
#include <common.h>
-#include <commproc.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <watchdog.h>
diff --git a/arch/powerpc/cpu/ppc4xx/interrupts.c b/arch/powerpc/cpu/ppc4xx/interrupts.c
index 45997d6eae..599f2c21cf 100644
--- a/arch/powerpc/cpu/ppc4xx/interrupts.c
+++ b/arch/powerpc/cpu/ppc4xx/interrupts.c
@@ -22,7 +22,6 @@
#include <asm/interrupt.h>
#include <asm/ppc4xx.h>
#include <ppc_asm.tmpl>
-#include <commproc.h>
DECLARE_GLOBAL_DATA_PTR;
diff --git a/arch/powerpc/cpu/ppc4xx/miiphy.c b/arch/powerpc/cpu/ppc4xx/miiphy.c
index aef267e0a2..6273772ee0 100644
--- a/arch/powerpc/cpu/ppc4xx/miiphy.c
+++ b/arch/powerpc/cpu/ppc4xx/miiphy.c
@@ -21,7 +21,6 @@
#include <asm/processor.h>
#include <asm/io.h>
#include <ppc_asm.tmpl>
-#include <commproc.h>
#include <asm/ppc4xx.h>
#include <asm/ppc4xx-emac.h>
#include <asm/ppc4xx-mal.h>
diff --git a/arch/powerpc/cpu/ppc4xx/uic.c b/arch/powerpc/cpu/ppc4xx/uic.c
index fb453b1adf..acc232dcf2 100644
--- a/arch/powerpc/cpu/ppc4xx/uic.c
+++ b/arch/powerpc/cpu/ppc4xx/uic.c
@@ -22,7 +22,6 @@
#include <asm/interrupt.h>
#include <asm/ppc4xx.h>
#include <ppc_asm.tmpl>
-#include <commproc.h>
#if (UIC_MAX > 3)
#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
diff --git a/arch/powerpc/cpu/ppc4xx/xilinx_irq.c b/arch/powerpc/cpu/ppc4xx/xilinx_irq.c
index 1a2e917eb2..acb933e08b 100644
--- a/arch/powerpc/cpu/ppc4xx/xilinx_irq.c
+++ b/arch/powerpc/cpu/ppc4xx/xilinx_irq.c
@@ -12,7 +12,6 @@
#include <asm/interrupt.h>
#include <asm/ppc4xx.h>
#include <ppc_asm.tmpl>
-#include <commproc.h>
#include <asm/io.h>
#include <asm/xilinx_irq.h>