summaryrefslogtreecommitdiff
path: root/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c')
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c526
1 files changed, 0 insertions, 526 deletions
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
deleted file mode 100644
index 332fe25c48..0000000000
--- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
+++ /dev/null
@@ -1,526 +0,0 @@
-/*
- * Copyright 2008-2012 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-
-#if defined(CONFIG_FSL_DDR3)
-static unsigned int
-compute_cas_latency_ddr3(const dimm_params_t *dimm_params,
- common_timing_params_t *outpdimm,
- unsigned int number_of_dimms)
-{
- unsigned int i;
- unsigned int taamin_ps = 0;
- unsigned int tckmin_x_ps = 0;
- unsigned int common_caslat;
- unsigned int caslat_actual;
- unsigned int retry = 16;
- unsigned int tmp;
- const unsigned int mclk_ps = get_memory_clk_period_ps();
-
- /* compute the common CAS latency supported between slots */
- tmp = dimm_params[0].caslat_x;
- for (i = 1; i < number_of_dimms; i++) {
- if (dimm_params[i].n_ranks)
- tmp &= dimm_params[i].caslat_x;
- }
- common_caslat = tmp;
-
- /* compute the max tAAmin tCKmin between slots */
- for (i = 0; i < number_of_dimms; i++) {
- taamin_ps = max(taamin_ps, dimm_params[i].taa_ps);
- tckmin_x_ps = max(tckmin_x_ps, dimm_params[i].tckmin_x_ps);
- }
- /* validate if the memory clk is in the range of dimms */
- if (mclk_ps < tckmin_x_ps) {
- printf("DDR clock (MCLK cycle %u ps) is faster than "
- "the slowest DIMM(s) (tCKmin %u ps) can support.\n",
- mclk_ps, tckmin_x_ps);
- }
- /* determine the acutal cas latency */
- caslat_actual = (taamin_ps + mclk_ps - 1) / mclk_ps;
- /* check if the dimms support the CAS latency */
- while (!(common_caslat & (1 << caslat_actual)) && retry > 0) {
- caslat_actual++;
- retry--;
- }
- /* once the caculation of caslat_actual is completed
- * we must verify that this CAS latency value does not
- * exceed tAAmax, which is 20 ns for all DDR3 speed grades
- */
- if (caslat_actual * mclk_ps > 20000) {
- printf("The choosen cas latency %d is too large\n",
- caslat_actual);
- }
- outpdimm->lowest_common_SPD_caslat = caslat_actual;
-
- return 0;
-}
-#endif
-
-/*
- * compute_lowest_common_dimm_parameters()
- *
- * Determine the worst-case DIMM timing parameters from the set of DIMMs
- * whose parameters have been computed into the array pointed to
- * by dimm_params.
- */
-unsigned int
-compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
- common_timing_params_t *outpdimm,
- const unsigned int number_of_dimms)
-{
- unsigned int i, j;
-
- unsigned int tckmin_x_ps = 0;
- unsigned int tckmax_ps = 0xFFFFFFFF;
- unsigned int tckmax_max_ps = 0;
- unsigned int trcd_ps = 0;
- unsigned int trp_ps = 0;
- unsigned int tras_ps = 0;
- unsigned int twr_ps = 0;
- unsigned int twtr_ps = 0;
- unsigned int trfc_ps = 0;
- unsigned int trrd_ps = 0;
- unsigned int trc_ps = 0;
- unsigned int refresh_rate_ps = 0;
- unsigned int extended_op_srt = 1;
- unsigned int tis_ps = 0;
- unsigned int tih_ps = 0;
- unsigned int tds_ps = 0;
- unsigned int tdh_ps = 0;
- unsigned int trtp_ps = 0;
- unsigned int tdqsq_max_ps = 0;
- unsigned int tqhs_ps = 0;
-
- unsigned int temp1, temp2;
- unsigned int additive_latency = 0;
-#if !defined(CONFIG_FSL_DDR3)
- const unsigned int mclk_ps = get_memory_clk_period_ps();
- unsigned int lowest_good_caslat;
- unsigned int not_ok;
-
- debug("using mclk_ps = %u\n", mclk_ps);
-#endif
-
- temp1 = 0;
- for (i = 0; i < number_of_dimms; i++) {
- /*
- * If there are no ranks on this DIMM,
- * it probably doesn't exist, so skip it.
- */
- if (dimm_params[i].n_ranks == 0) {
- temp1++;
- continue;
- }
- if (dimm_params[i].n_ranks == 4 && i != 0) {
- printf("Found Quad-rank DIMM in wrong bank, ignored."
- " Software may not run as expected.\n");
- temp1++;
- continue;
- }
-
- /*
- * check if quad-rank DIMM is plugged if
- * CONFIG_CHIP_SELECT_QUAD_CAPABLE is not defined
- * Only the board with proper design is capable
- */
-#ifndef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
- if (dimm_params[i].n_ranks == 4 && \
- CONFIG_CHIP_SELECTS_PER_CTRL/CONFIG_DIMM_SLOTS_PER_CTLR < 4) {
- printf("Found Quad-rank DIMM, not able to support.");
- temp1++;
- continue;
- }
-#endif
- /*
- * Find minimum tckmax_ps to find fastest slow speed,
- * i.e., this is the slowest the whole system can go.
- */
- tckmax_ps = min(tckmax_ps, dimm_params[i].tckmax_ps);
-
- /* Either find maximum value to determine slowest
- * speed, delay, time, period, etc */
- tckmin_x_ps = max(tckmin_x_ps, dimm_params[i].tckmin_x_ps);
- tckmax_max_ps = max(tckmax_max_ps, dimm_params[i].tckmax_ps);
- trcd_ps = max(trcd_ps, dimm_params[i].trcd_ps);
- trp_ps = max(trp_ps, dimm_params[i].trp_ps);
- tras_ps = max(tras_ps, dimm_params[i].tras_ps);
- twr_ps = max(twr_ps, dimm_params[i].twr_ps);
- twtr_ps = max(twtr_ps, dimm_params[i].twtr_ps);
- trfc_ps = max(trfc_ps, dimm_params[i].trfc_ps);
- trrd_ps = max(trrd_ps, dimm_params[i].trrd_ps);
- trc_ps = max(trc_ps, dimm_params[i].trc_ps);
- tis_ps = max(tis_ps, dimm_params[i].tis_ps);
- tih_ps = max(tih_ps, dimm_params[i].tih_ps);
- tds_ps = max(tds_ps, dimm_params[i].tds_ps);
- tdh_ps = max(tdh_ps, dimm_params[i].tdh_ps);
- trtp_ps = max(trtp_ps, dimm_params[i].trtp_ps);
- tqhs_ps = max(tqhs_ps, dimm_params[i].tqhs_ps);
- refresh_rate_ps = max(refresh_rate_ps,
- dimm_params[i].refresh_rate_ps);
- /* extended_op_srt is either 0 or 1, 0 having priority */
- extended_op_srt = min(extended_op_srt,
- dimm_params[i].extended_op_srt);
-
- /*
- * Find maximum tdqsq_max_ps to find slowest.
- *
- * FIXME: is finding the slowest value the correct
- * strategy for this parameter?
- */
- tdqsq_max_ps = max(tdqsq_max_ps, dimm_params[i].tdqsq_max_ps);
- }
-
- outpdimm->ndimms_present = number_of_dimms - temp1;
-
- if (temp1 == number_of_dimms) {
- debug("no dimms this memory controller\n");
- return 0;
- }
-
- outpdimm->tckmin_x_ps = tckmin_x_ps;
- outpdimm->tckmax_ps = tckmax_ps;
- outpdimm->tckmax_max_ps = tckmax_max_ps;
- outpdimm->trcd_ps = trcd_ps;
- outpdimm->trp_ps = trp_ps;
- outpdimm->tras_ps = tras_ps;
- outpdimm->twr_ps = twr_ps;
- outpdimm->twtr_ps = twtr_ps;
- outpdimm->trfc_ps = trfc_ps;
- outpdimm->trrd_ps = trrd_ps;
- outpdimm->trc_ps = trc_ps;
- outpdimm->refresh_rate_ps = refresh_rate_ps;
- outpdimm->extended_op_srt = extended_op_srt;
- outpdimm->tis_ps = tis_ps;
- outpdimm->tih_ps = tih_ps;
- outpdimm->tds_ps = tds_ps;
- outpdimm->tdh_ps = tdh_ps;
- outpdimm->trtp_ps = trtp_ps;
- outpdimm->tdqsq_max_ps = tdqsq_max_ps;
- outpdimm->tqhs_ps = tqhs_ps;
-
- /* Determine common burst length for all DIMMs. */
- temp1 = 0xff;
- for (i = 0; i < number_of_dimms; i++) {
- if (dimm_params[i].n_ranks) {
- temp1 &= dimm_params[i].burst_lengths_bitmask;
- }
- }
- outpdimm->all_dimms_burst_lengths_bitmask = temp1;
-
- /* Determine if all DIMMs registered buffered. */
- temp1 = temp2 = 0;
- for (i = 0; i < number_of_dimms; i++) {
- if (dimm_params[i].n_ranks) {
- if (dimm_params[i].registered_dimm) {
- temp1 = 1;
-#ifndef CONFIG_SPL_BUILD
- printf("Detected RDIMM %s\n",
- dimm_params[i].mpart);
-#endif
- } else {
- temp2 = 1;
-#ifndef CONFIG_SPL_BUILD
- printf("Detected UDIMM %s\n",
- dimm_params[i].mpart);
-#endif
- }
- }
- }
-
- outpdimm->all_dimms_registered = 0;
- outpdimm->all_dimms_unbuffered = 0;
- if (temp1 && !temp2) {
- outpdimm->all_dimms_registered = 1;
- } else if (!temp1 && temp2) {
- outpdimm->all_dimms_unbuffered = 1;
- } else {
- printf("ERROR: Mix of registered buffered and unbuffered "
- "DIMMs detected!\n");
- }
-
- temp1 = 0;
- if (outpdimm->all_dimms_registered)
- for (j = 0; j < 16; j++) {
- outpdimm->rcw[j] = dimm_params[0].rcw[j];
- for (i = 1; i < number_of_dimms; i++) {
- if (!dimm_params[i].n_ranks)
- continue;
- if (dimm_params[i].rcw[j] != dimm_params[0].rcw[j]) {
- temp1 = 1;
- break;
- }
- }
- }
-
- if (temp1 != 0)
- printf("ERROR: Mix different RDIMM detected!\n");
-
-#if defined(CONFIG_FSL_DDR3)
- if (compute_cas_latency_ddr3(dimm_params, outpdimm, number_of_dimms))
- return 1;
-#else
- /*
- * Compute a CAS latency suitable for all DIMMs
- *
- * Strategy for SPD-defined latencies: compute only
- * CAS latency defined by all DIMMs.
- */
-
- /*
- * Step 1: find CAS latency common to all DIMMs using bitwise
- * operation.
- */
- temp1 = 0xFF;
- for (i = 0; i < number_of_dimms; i++) {
- if (dimm_params[i].n_ranks) {
- temp2 = 0;
- temp2 |= 1 << dimm_params[i].caslat_x;
- temp2 |= 1 << dimm_params[i].caslat_x_minus_1;
- temp2 |= 1 << dimm_params[i].caslat_x_minus_2;
- /*
- * FIXME: If there was no entry for X-2 (X-1) in
- * the SPD, then caslat_x_minus_2
- * (caslat_x_minus_1) contains either 255 or
- * 0xFFFFFFFF because that's what the glorious
- * __ilog2 function returns for an input of 0.
- * On 32-bit PowerPC, left shift counts with bit
- * 26 set (that the value of 255 or 0xFFFFFFFF
- * will have), cause the destination register to
- * be 0. That is why this works.
- */
- temp1 &= temp2;
- }
- }
-
- /*
- * Step 2: check each common CAS latency against tCK of each
- * DIMM's SPD.
- */
- lowest_good_caslat = 0;
- temp2 = 0;
- while (temp1) {
- not_ok = 0;
- temp2 = __ilog2(temp1);
- debug("checking common caslat = %u\n", temp2);
-
- /* Check if this CAS latency will work on all DIMMs at tCK. */
- for (i = 0; i < number_of_dimms; i++) {
- if (!dimm_params[i].n_ranks) {
- continue;
- }
- if (dimm_params[i].caslat_x == temp2) {
- if (mclk_ps >= dimm_params[i].tckmin_x_ps) {
- debug("CL = %u ok on DIMM %u at tCK=%u"
- " ps with its tCKmin_X_ps of %u\n",
- temp2, i, mclk_ps,
- dimm_params[i].tckmin_x_ps);
- continue;
- } else {
- not_ok++;
- }
- }
-
- if (dimm_params[i].caslat_x_minus_1 == temp2) {
- unsigned int tckmin_x_minus_1_ps
- = dimm_params[i].tckmin_x_minus_1_ps;
- if (mclk_ps >= tckmin_x_minus_1_ps) {
- debug("CL = %u ok on DIMM %u at "
- "tCK=%u ps with its "
- "tckmin_x_minus_1_ps of %u\n",
- temp2, i, mclk_ps,
- tckmin_x_minus_1_ps);
- continue;
- } else {
- not_ok++;
- }
- }
-
- if (dimm_params[i].caslat_x_minus_2 == temp2) {
- unsigned int tckmin_x_minus_2_ps
- = dimm_params[i].tckmin_x_minus_2_ps;
- if (mclk_ps >= tckmin_x_minus_2_ps) {
- debug("CL = %u ok on DIMM %u at "
- "tCK=%u ps with its "
- "tckmin_x_minus_2_ps of %u\n",
- temp2, i, mclk_ps,
- tckmin_x_minus_2_ps);
- continue;
- } else {
- not_ok++;
- }
- }
- }
-
- if (!not_ok) {
- lowest_good_caslat = temp2;
- }
-
- temp1 &= ~(1 << temp2);
- }
-
- debug("lowest common SPD-defined CAS latency = %u\n",
- lowest_good_caslat);
- outpdimm->lowest_common_SPD_caslat = lowest_good_caslat;
-
-
- /*
- * Compute a common 'de-rated' CAS latency.
- *
- * The strategy here is to find the *highest* dereated cas latency
- * with the assumption that all of the DIMMs will support a dereated
- * CAS latency higher than or equal to their lowest dereated value.
- */
- temp1 = 0;
- for (i = 0; i < number_of_dimms; i++) {
- temp1 = max(temp1, dimm_params[i].caslat_lowest_derated);
- }
- outpdimm->highest_common_derated_caslat = temp1;
- debug("highest common dereated CAS latency = %u\n", temp1);
-#endif /* #if defined(CONFIG_FSL_DDR3) */
-
- /* Determine if all DIMMs ECC capable. */
- temp1 = 1;
- for (i = 0; i < number_of_dimms; i++) {
- if (dimm_params[i].n_ranks &&
- !(dimm_params[i].edc_config & EDC_ECC)) {
- temp1 = 0;
- break;
- }
- }
- if (temp1) {
- debug("all DIMMs ECC capable\n");
- } else {
- debug("Warning: not all DIMMs ECC capable, cant enable ECC\n");
- }
- outpdimm->all_dimms_ecc_capable = temp1;
-
-#ifndef CONFIG_FSL_DDR3
- /* FIXME: move to somewhere else to validate. */
- if (mclk_ps > tckmax_max_ps) {
- printf("Warning: some of the installed DIMMs "
- "can not operate this slowly.\n");
- return 1;
- }
-#endif
- /*
- * Compute additive latency.
- *
- * For DDR1, additive latency should be 0.
- *
- * For DDR2, with ODT enabled, use "a value" less than ACTTORW,
- * which comes from Trcd, and also note that:
- * add_lat + caslat must be >= 4
- *
- * For DDR3, we use the AL=0
- *
- * When to use additive latency for DDR2:
- *
- * I. Because you are using CL=3 and need to do ODT on writes and
- * want functionality.
- * 1. Are you going to use ODT? (Does your board not have
- * additional termination circuitry for DQ, DQS, DQS_,
- * DM, RDQS, RDQS_ for x4/x8 configs?)
- * 2. If so, is your lowest supported CL going to be 3?
- * 3. If so, then you must set AL=1 because
- *
- * WL >= 3 for ODT on writes
- * RL = AL + CL
- * WL = RL - 1
- * ->
- * WL = AL + CL - 1
- * AL + CL - 1 >= 3
- * AL + CL >= 4
- * QED
- *
- * RL >= 3 for ODT on reads
- * RL = AL + CL
- *
- * Since CL aren't usually less than 2, AL=0 is a minimum,
- * so the WL-derived AL should be the -- FIXME?
- *
- * II. Because you are using auto-precharge globally and want to
- * use additive latency (posted CAS) to get more bandwidth.
- * 1. Are you going to use auto-precharge mode globally?
- *
- * Use addtivie latency and compute AL to be 1 cycle less than
- * tRCD, i.e. the READ or WRITE command is in the cycle
- * immediately following the ACTIVATE command..
- *
- * III. Because you feel like it or want to do some sort of
- * degraded-performance experiment.
- * 1. Do you just want to use additive latency because you feel
- * like it?
- *
- * Validation: AL is less than tRCD, and within the other
- * read-to-precharge constraints.
- */
-
- additive_latency = 0;
-
-#if defined(CONFIG_FSL_DDR2)
- if (lowest_good_caslat < 4) {
- additive_latency = (picos_to_mclk(trcd_ps) > lowest_good_caslat)
- ? picos_to_mclk(trcd_ps) - lowest_good_caslat : 0;
- if (mclk_to_picos(additive_latency) > trcd_ps) {
- additive_latency = picos_to_mclk(trcd_ps);
- debug("setting additive_latency to %u because it was "
- " greater than tRCD_ps\n", additive_latency);
- }
- }
-
-#elif defined(CONFIG_FSL_DDR3)
- /*
- * The system will not use the global auto-precharge mode.
- * However, it uses the page mode, so we set AL=0
- */
- additive_latency = 0;
-#endif
-
- /*
- * Validate additive latency
- * FIXME: move to somewhere else to validate
- *
- * AL <= tRCD(min)
- */
- if (mclk_to_picos(additive_latency) > trcd_ps) {
- printf("Error: invalid additive latency exceeds tRCD(min).\n");
- return 1;
- }
-
- /*
- * RL = CL + AL; RL >= 3 for ODT_RD_CFG to be enabled
- * WL = RL - 1; WL >= 3 for ODT_WL_CFG to be enabled
- * ADD_LAT (the register) must be set to a value less
- * than ACTTORW if WL = 1, then AL must be set to 1
- * RD_TO_PRE (the register) must be set to a minimum
- * tRTP + AL if AL is nonzero
- */
-
- /*
- * Additive latency will be applied only if the memctl option to
- * use it.
- */
- outpdimm->additive_latency = additive_latency;
-
- debug("tCKmin_ps = %u\n", outpdimm->tckmin_x_ps);
- debug("trcd_ps = %u\n", outpdimm->trcd_ps);
- debug("trp_ps = %u\n", outpdimm->trp_ps);
- debug("tras_ps = %u\n", outpdimm->tras_ps);
- debug("twr_ps = %u\n", outpdimm->twr_ps);
- debug("twtr_ps = %u\n", outpdimm->twtr_ps);
- debug("trfc_ps = %u\n", outpdimm->trfc_ps);
- debug("trrd_ps = %u\n", outpdimm->trrd_ps);
- debug("trc_ps = %u\n", outpdimm->trc_ps);
-
- return 0;
-}