summaryrefslogtreecommitdiff
path: root/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/cpu/mpc85xx/ddr-gen3.c')
-rw-r--r--arch/powerpc/cpu/mpc85xx/ddr-gen3.c464
1 files changed, 0 insertions, 464 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
deleted file mode 100644
index 1be51d3307..0000000000
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * Copyright 2008-2012 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/processor.h>
-
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
-#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
-#endif
-
-
-/*
- * regs has the to-be-set values for DDR controller registers
- * ctrl_num is the DDR controller number
- * step: 0 goes through the initialization in one pass
- * 1 sets registers and returns before enabling controller
- * 2 resumes from step 1 and continues to initialize
- * Dividing the initialization to two steps to deassert DDR reset signal
- * to comply with JEDEC specs for RDIMMs.
- */
-void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num, int step)
-{
- unsigned int i, bus_width;
- volatile ccsr_ddr_t *ddr;
- u32 temp_sdram_cfg;
- u32 total_gb_size_per_controller;
- int timeout;
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
- int timeout_save;
- volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR;
- unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t;
- int csn = -1;
-#endif
-
- switch (ctrl_num) {
- case 0:
- ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
- break;
-#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
- case 1:
- ddr = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
- break;
-#endif
-#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
- case 2:
- ddr = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
- break;
-#endif
-#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
- case 3:
- ddr = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR;
- break;
-#endif
- default:
- printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
- return;
- }
-
- if (step == 2)
- goto step2;
-
- if (regs->ddr_eor)
- out_be32(&ddr->eor, regs->ddr_eor);
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
- debug("Workaround for ERRATUM_DDR111_DDR134\n");
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- cs_sa = (regs->cs[i].bnds >> 16) & 0xfff;
- cs_ea = regs->cs[i].bnds & 0xfff;
- if ((cs_sa <= 0xff) && (cs_ea >= 0xff)) {
- csn = i;
- csn_bnds_backup = regs->cs[i].bnds;
- csn_bnds_t = (unsigned int *) &regs->cs[i].bnds;
- if (cs_ea > 0xeff)
- *csn_bnds_t = regs->cs[i].bnds + 0x01000000;
- else
- *csn_bnds_t = regs->cs[i].bnds + 0x01000100;
- debug("Found cs%d_bns (0x%08x) covering 0xff000000, "
- "change it to 0x%x\n",
- csn, csn_bnds_backup, regs->cs[i].bnds);
- break;
- }
- }
-#endif
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == 0) {
- out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs0_config, regs->cs[i].config);
- out_be32(&ddr->cs0_config_2, regs->cs[i].config_2);
-
- } else if (i == 1) {
- out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs1_config, regs->cs[i].config);
- out_be32(&ddr->cs1_config_2, regs->cs[i].config_2);
-
- } else if (i == 2) {
- out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs2_config, regs->cs[i].config);
- out_be32(&ddr->cs2_config_2, regs->cs[i].config_2);
-
- } else if (i == 3) {
- out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs3_config, regs->cs[i].config);
- out_be32(&ddr->cs3_config_2, regs->cs[i].config_2);
- }
- }
-
- out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
- out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
- out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
- out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
- out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
- out_be32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
- out_be32(&ddr->sdram_mode_4, regs->ddr_sdram_mode_4);
- out_be32(&ddr->sdram_mode_5, regs->ddr_sdram_mode_5);
- out_be32(&ddr->sdram_mode_6, regs->ddr_sdram_mode_6);
- out_be32(&ddr->sdram_mode_7, regs->ddr_sdram_mode_7);
- out_be32(&ddr->sdram_mode_8, regs->ddr_sdram_mode_8);
- out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
- out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
- out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
- out_be32(&ddr->init_addr, regs->ddr_init_addr);
- out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-
- out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4);
- out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
- out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
- out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
-#ifndef CONFIG_SYS_FSL_DDR_EMU
- /*
- * Skip these two registers if running on emulator
- * because emulator doesn't have skew between bytes.
- */
-
- if (regs->ddr_wrlvl_cntl_2)
- out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2);
- if (regs->ddr_wrlvl_cntl_3)
- out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3);
-#endif
-
- out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
- out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
- out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
- out_be32(&ddr->ddr_cdr1, regs->ddr_cdr1);
- out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
- out_be32(&ddr->err_disable, regs->err_disable);
- out_be32(&ddr->err_int_en, regs->err_int_en);
- for (i = 0; i < 32; i++) {
- if (regs->debug[i]) {
- debug("Write to debug_%d as %08x\n", i+1, regs->debug[i]);
- out_be32(&ddr->debug[i], regs->debug[i]);
- }
- }
-#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
- out_be32(&ddr->debug[28], 0x30003000);
-#endif
-
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474
- out_be32(&ddr->debug[12], 0x00000015);
- out_be32(&ddr->debug[21], 0x24000000);
-#endif /* CONFIG_SYS_FSL_ERRATUM_DDR_A003474 */
-
- /*
- * For RDIMMs, JEDEC spec requires clocks to be stable before reset is
- * deasserted. Clocks start when any chip select is enabled and clock
- * control register is set. Because all DDR components are connected to
- * one reset signal, this needs to be done in two steps. Step 1 is to
- * get the clocks started. Step 2 resumes after reset signal is
- * deasserted.
- */
- if (step == 1) {
- udelay(200);
- return;
- }
-
-step2:
- /* Set, but do not enable the memory */
- temp_sdram_cfg = regs->ddr_sdram_cfg;
- temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN);
- out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003
- debug("Workaround for ERRATUM_DDR_A003\n");
- if (regs->ddr_sdram_rcw_2 & 0x00f00000) {
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2 & 0xf07fffff);
- out_be32(&ddr->debug[2], 0x00000400);
- out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl & 0x7fffffff);
- out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl & 0x7fffffff);
- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2 & 0xffffffeb);
- out_be32(&ddr->mtcr, 0);
- out_be32(&ddr->debug[12], 0x00000015);
- out_be32(&ddr->debug[21], 0x24000000);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval & 0xffff);
- out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_BI | SDRAM_CFG_MEM_EN);
-
- asm volatile("sync;isync");
- while (!(in_be32(&ddr->debug[1]) & 0x2))
- ;
-
- switch (regs->ddr_sdram_rcw_2 & 0x00f00000) {
- case 0x00000000:
- out_be32(&ddr->sdram_md_cntl,
- MD_CNTL_MD_EN |
- MD_CNTL_CS_SEL_CS0_CS1 |
- 0x04000000 |
- MD_CNTL_WRCW |
- MD_CNTL_MD_VALUE(0x02));
- break;
- case 0x00100000:
- out_be32(&ddr->sdram_md_cntl,
- MD_CNTL_MD_EN |
- MD_CNTL_CS_SEL_CS0_CS1 |
- 0x04000000 |
- MD_CNTL_WRCW |
- MD_CNTL_MD_VALUE(0x0a));
- break;
- case 0x00200000:
- out_be32(&ddr->sdram_md_cntl,
- MD_CNTL_MD_EN |
- MD_CNTL_CS_SEL_CS0_CS1 |
- 0x04000000 |
- MD_CNTL_WRCW |
- MD_CNTL_MD_VALUE(0x12));
- break;
- case 0x00300000:
- out_be32(&ddr->sdram_md_cntl,
- MD_CNTL_MD_EN |
- MD_CNTL_CS_SEL_CS0_CS1 |
- 0x04000000 |
- MD_CNTL_WRCW |
- MD_CNTL_MD_VALUE(0x1a));
- break;
- default:
- out_be32(&ddr->sdram_md_cntl,
- MD_CNTL_MD_EN |
- MD_CNTL_CS_SEL_CS0_CS1 |
- 0x04000000 |
- MD_CNTL_WRCW |
- MD_CNTL_MD_VALUE(0x02));
- printf("Unsupported RC10\n");
- break;
- }
-
- while (in_be32(&ddr->sdram_md_cntl) & 0x80000000)
- ;
- udelay(6);
- out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- out_be32(&ddr->debug[2], 0x0);
- out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
- out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
- out_be32(&ddr->debug[12], 0x0);
- out_be32(&ddr->debug[21], 0x0);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
-
- }
-#endif
- /*
- * For 8572 DDR1 erratum - DDR controller may enter illegal state
- * when operatiing in 32-bit bus mode with 4-beat bursts,
- * This erratum does not affect DDR3 mode, only for DDR2 mode.
- */
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_115
- debug("Workaround for ERRATUM_DDR_115\n");
- if ((((in_be32(&ddr->sdram_cfg) >> 24) & 0x7) == SDRAM_TYPE_DDR2)
- && in_be32(&ddr->sdram_cfg) & 0x80000) {
- /* set DEBUG_1[31] */
- setbits_be32(&ddr->debug[0], 1);
- }
-#endif
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
- debug("Workaround for ERRATUM_DDR111_DDR134\n");
- /*
- * This is the combined workaround for DDR111 and DDR134
- * following the published errata for MPC8572
- */
-
- /* 1. Set EEBACR[3] */
- setbits_be32(&ecm->eebacr, 0x10000000);
- debug("Setting EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr));
-
- /* 2. Set DINIT in SDRAM_CFG_2*/
- setbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_D_INIT);
- debug("Setting sdram_cfg_2[D_INIT] to 0x%08x\n",
- in_be32(&ddr->sdram_cfg_2));
-
- /* 3. Set DEBUG_3[21] */
- setbits_be32(&ddr->debug[2], 0x400);
- debug("Setting DEBUG_3[21] to 0x%08x\n", in_be32(&ddr->debug[2]));
-
-#endif /* part 1 of the workaound */
-
- /*
- * 500 painful micro-seconds must elapse between
- * the DDR clock setup and the DDR config enable.
- * DDR2 need 200 us, and DDR3 need 500 us from spec,
- * we choose the max, that is 500 us for all of case.
- */
- udelay(500);
- asm volatile("sync;isync");
-
- /* Let the controller go */
- temp_sdram_cfg = in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
- out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
- asm volatile("sync;isync");
-
- total_gb_size_per_controller = 0;
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (!(regs->cs[i].config & 0x80000000))
- continue;
- total_gb_size_per_controller += 1 << (
- ((regs->cs[i].config >> 14) & 0x3) + 2 +
- ((regs->cs[i].config >> 8) & 0x7) + 12 +
- ((regs->cs[i].config >> 0) & 0x7) + 8 +
- 3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) -
- 26); /* minus 26 (count of 64M) */
- }
- if (fsl_ddr_get_intl3r() & 0x80000000) /* 3-way interleaving */
- total_gb_size_per_controller *= 3;
- else if (regs->cs[0].config & 0x20000000) /* 2-way interleaving */
- total_gb_size_per_controller <<= 1;
- /*
- * total memory / bus width = transactions needed
- * transactions needed / data rate = seconds
- * to add plenty of buffer, double the time
- * For example, 2GB on 666MT/s 64-bit bus takes about 402ms
- * Let's wait for 800ms
- */
- bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK)
- >> SDRAM_CFG_DBW_SHIFT);
- timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 /
- (get_ddr_freq(0) >> 20)) << 1;
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
- timeout_save = timeout;
-#endif
- total_gb_size_per_controller >>= 4; /* shift down to gb size */
- debug("total %d GB\n", total_gb_size_per_controller);
- debug("Need to wait up to %d * 10ms\n", timeout);
-
- /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
- while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
- (timeout >= 0)) {
- udelay(10000); /* throttle polling rate */
- timeout--;
- }
-
- if (timeout <= 0)
- printf("Waiting for D_INIT timeout. Memory may not work.\n");
-
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
- /* continue this workaround */
-
- /* 4. Clear DEBUG3[21] */
- clrbits_be32(&ddr->debug[2], 0x400);
- debug("Clearing D3[21] to 0x%08x\n", in_be32(&ddr->debug[2]));
-
- /* DDR134 workaround starts */
- /* A: Clear sdram_cfg_2[odt_cfg] */
- clrbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_ODT_CFG_MASK);
- debug("Clearing SDRAM_CFG2[ODT_CFG] to 0x%08x\n",
- in_be32(&ddr->sdram_cfg_2));
-
- /* B: Set DEBUG1[15] */
- setbits_be32(&ddr->debug[0], 0x10000);
- debug("Setting D1[15] to 0x%08x\n", in_be32(&ddr->debug[0]));
-
- /* C: Set timing_cfg_2[cpo] to 0b11111 */
- setbits_be32(&ddr->timing_cfg_2, TIMING_CFG_2_CPO_MASK);
- debug("Setting TMING_CFG_2[CPO] to 0x%08x\n",
- in_be32(&ddr->timing_cfg_2));
-
- /* D: Set D6 to 0x9f9f9f9f */
- out_be32(&ddr->debug[5], 0x9f9f9f9f);
- debug("Setting D6 to 0x%08x\n", in_be32(&ddr->debug[5]));
-
- /* E: Set D7 to 0x9f9f9f9f */
- out_be32(&ddr->debug[6], 0x9f9f9f9f);
- debug("Setting D7 to 0x%08x\n", in_be32(&ddr->debug[6]));
-
- /* F: Set D2[20] */
- setbits_be32(&ddr->debug[1], 0x800);
- debug("Setting D2[20] to 0x%08x\n", in_be32(&ddr->debug[1]));
-
- /* G: Poll on D2[20] until cleared */
- while (in_be32(&ddr->debug[1]) & 0x800)
- udelay(10000); /* throttle polling rate */
-
- /* H: Clear D1[15] */
- clrbits_be32(&ddr->debug[0], 0x10000);
- debug("Setting D1[15] to 0x%08x\n", in_be32(&ddr->debug[0]));
-
- /* I: Set sdram_cfg_2[odt_cfg] */
- setbits_be32(&ddr->sdram_cfg_2,
- regs->ddr_sdram_cfg_2 & SDRAM_CFG2_ODT_CFG_MASK);
- debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
-
- /* Continuing with the DDR111 workaround */
- /* 5. Set D2[21] */
- setbits_be32(&ddr->debug[1], 0x400);
- debug("Setting D2[21] to 0x%08x\n", in_be32(&ddr->debug[1]));
-
- /* 6. Poll D2[21] until its cleared */
- while (in_be32(&ddr->debug[1]) & 0x400)
- udelay(10000); /* throttle polling rate */
-
- /* 7. Wait for state machine 2nd run, roughly 400ms/GB */
- debug("Wait for %d * 10ms\n", timeout_save);
- udelay(timeout_save * 10000);
-
- /* 8. Set sdram_cfg_2[dinit] if options requires */
- setbits_be32(&ddr->sdram_cfg_2,
- regs->ddr_sdram_cfg_2 & SDRAM_CFG2_D_INIT);
- debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
-
- /* 9. Poll until dinit is cleared */
- timeout = timeout_save;
- debug("Need to wait up to %d * 10ms\n", timeout);
- while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
- (timeout >= 0)) {
- udelay(10000); /* throttle polling rate */
- timeout--;
- }
-
- if (timeout <= 0)
- printf("Waiting for D_INIT timeout. Memory may not work.\n");
-
- /* 10. Clear EEBACR[3] */
- clrbits_be32(&ecm->eebacr, 10000000);
- debug("Clearing EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr));
-
- if (csn != -1) {
- csn_bnds_t = (unsigned int *) &regs->cs[csn].bnds;
- *csn_bnds_t = csn_bnds_backup;
- debug("Change cs%d_bnds back to 0x%08x\n",
- csn, regs->cs[csn].bnds);
- setbits_be32(&ddr->sdram_cfg, 0x2); /* MEM_HALT */
- switch (csn) {
- case 0:
- out_be32(&ddr->cs0_bnds, regs->cs[csn].bnds);
- break;
- case 1:
- out_be32(&ddr->cs1_bnds, regs->cs[csn].bnds);
- break;
- case 2:
- out_be32(&ddr->cs2_bnds, regs->cs[csn].bnds);
- break;
- case 3:
- out_be32(&ddr->cs3_bnds, regs->cs[csn].bnds);
- break;
- }
- clrbits_be32(&ddr->sdram_cfg, 0x2);
- }
-#endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */
-}