diff options
Diffstat (limited to 'arch/powerpc/cpu/mpc8260/pci.c')
-rw-r--r-- | arch/powerpc/cpu/mpc8260/pci.c | 466 |
1 files changed, 466 insertions, 0 deletions
diff --git a/arch/powerpc/cpu/mpc8260/pci.c b/arch/powerpc/cpu/mpc8260/pci.c new file mode 100644 index 00000000000..6a14ba4adcc --- /dev/null +++ b/arch/powerpc/cpu/mpc8260/pci.c @@ -0,0 +1,466 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (c) 2005 MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * Added support for PCI bridge on MPC8272ADS + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#ifdef CONFIG_PCI + +#include <pci.h> +#include <mpc8260.h> +#include <asm/m8260_pci.h> +#include <asm/io.h> +#ifdef CONFIG_OF_LIBFDT +#include <libfdt.h> +#include <fdt_support.h> +#endif + +#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 || defined CONFIG_PM826 +DECLARE_GLOBAL_DATA_PTR; +#endif + +/* + * Local->PCI map (from CPU) controlled by + * MPC826x master window + * + * 0x80000000 - 0xBFFFFFFF CPU2PCI space PCIBR0 + * 0xF4000000 - 0xF7FFFFFF CPU2PCI space PCIBR1 + * + * 0x80000000 - 0x9FFFFFFF 0x80000000 - 0x9FFFFFFF (Outbound ATU #1) + * PCI Mem with prefetch + * + * 0xA0000000 - 0xBFFFFFFF 0xA0000000 - 0xBFFFFFFF (Outbound ATU #2) + * PCI Mem w/o prefetch + * + * 0xF4000000 - 0xF7FFFFFF 0x00000000 - 0x03FFFFFF (Outbound ATU #3) + * 32-bit PCI IO + * + * PCI->Local map (from PCI) + * MPC826x slave window controlled by + * + * 0x00000000 - 0x1FFFFFFF 0x00000000 - 0x1FFFFFFF (Inbound ATU #1) + * MPC826x local memory + */ + +/* + * Slave window that allows PCI masters to access MPC826x local memory. + * This window is set up using the first set of Inbound ATU registers + */ + +#ifndef CONFIG_SYS_PCI_SLV_MEM_LOCAL +#define PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE /* Local base */ +#else +#define PCI_SLV_MEM_LOCAL CONFIG_SYS_PCI_SLV_MEM_LOCAL +#endif + +#ifndef CONFIG_SYS_PCI_SLV_MEM_BUS +#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */ +#else +#define PCI_SLV_MEM_BUS CONFIG_SYS_PCI_SLV_MEM_BUS +#endif + +#ifndef CONFIG_SYS_PICMR0_MASK_ATTRIB +#define PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \ + PICMR_PREFETCH_EN) +#else +#define PICMR0_MASK_ATTRIB CONFIG_SYS_PICMR0_MASK_ATTRIB +#endif + +/* + * These are the windows that allow the CPU to access PCI address space. + * All three PCI master windows, which allow the CPU to access PCI + * prefetch, non prefetch, and IO space (see below), must all fit within + * these windows. + */ + +/* PCIBR0 */ +#ifndef CONFIG_SYS_PCI_MSTR0_LOCAL +#define PCI_MSTR0_LOCAL 0x80000000 /* Local base */ +#else +#define PCI_MSTR0_LOCAL CONFIG_SYS_PCI_MSTR0_LOCAL +#endif + +#ifndef CONFIG_SYS_PCIMSK0_MASK +#define PCIMSK0_MASK PCIMSK_1GB /* Size of window */ +#else +#define PCIMSK0_MASK CONFIG_SYS_PCIMSK0_MASK +#endif + +/* PCIBR1 */ +#ifndef CONFIG_SYS_PCI_MSTR1_LOCAL +#define PCI_MSTR1_LOCAL 0xF4000000 /* Local base */ +#else +#define PCI_MSTR1_LOCAL CONFIG_SYS_PCI_MSTR1_LOCAL +#endif + +#ifndef CONFIG_SYS_PCIMSK1_MASK +#define PCIMSK1_MASK PCIMSK_64MB /* Size of window */ +#else +#define PCIMSK1_MASK CONFIG_SYS_PCIMSK1_MASK +#endif + +/* + * Master window that allows the CPU to access PCI Memory (prefetch). + * This window will be setup with the first set of Outbound ATU registers + * in the bridge. + */ + +#ifndef CONFIG_SYS_PCI_MSTR_MEM_LOCAL +#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */ +#else +#define PCI_MSTR_MEM_LOCAL CONFIG_SYS_PCI_MSTR_MEM_LOCAL +#endif + +#ifndef CONFIG_SYS_PCI_MSTR_MEM_BUS +#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */ +#else +#define PCI_MSTR_MEM_BUS CONFIG_SYS_PCI_MSTR_MEM_BUS +#endif + +#ifndef CONFIG_SYS_CPU_PCI_MEM_START +#define CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL +#else +#define CPU_PCI_MEM_START CONFIG_SYS_CPU_PCI_MEM_START +#endif + +#ifndef CONFIG_SYS_PCI_MSTR_MEM_SIZE +#define PCI_MSTR_MEM_SIZE 0x10000000 /* 256MB */ +#else +#define PCI_MSTR_MEM_SIZE CONFIG_SYS_PCI_MSTR_MEM_SIZE +#endif + +#ifndef CONFIG_SYS_POCMR0_MASK_ATTRIB +#define POCMR0_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PREFETCH_EN) +#else +#define POCMR0_MASK_ATTRIB CONFIG_SYS_POCMR0_MASK_ATTRIB +#endif + +/* + * Master window that allows the CPU to access PCI Memory (non-prefetch). + * This window will be setup with the second set of Outbound ATU registers + * in the bridge. + */ + +#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL +#define PCI_MSTR_MEMIO_LOCAL 0x90000000 /* Local base */ +#else +#define PCI_MSTR_MEMIO_LOCAL CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL +#endif + +#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_BUS +#define PCI_MSTR_MEMIO_BUS 0x90000000 /* PCI base */ +#else +#define PCI_MSTR_MEMIO_BUS CONFIG_SYS_PCI_MSTR_MEMIO_BUS +#endif + +#ifndef CONFIG_SYS_CPU_PCI_MEMIO_START +#define CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL +#else +#define CPU_PCI_MEMIO_START CONFIG_SYS_CPU_PCI_MEMIO_START +#endif + +#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_SIZE +#define PCI_MSTR_MEMIO_SIZE 0x10000000 /* 256 MB */ +#else +#define PCI_MSTR_MEMIO_SIZE CONFIG_SYS_PCI_MSTR_MEMIO_SIZE +#endif + +#ifndef CONFIG_SYS_POCMR1_MASK_ATTRIB +#define POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE) +#else +#define POCMR1_MASK_ATTRIB CONFIG_SYS_POCMR1_MASK_ATTRIB +#endif + +/* + * Master window that allows the CPU to access PCI IO space. + * This window will be setup with the third set of Outbound ATU registers + * in the bridge. + */ + +#ifndef CONFIG_SYS_PCI_MSTR_IO_LOCAL +#define PCI_MSTR_IO_LOCAL 0xA0000000 /* Local base */ +#else +#define PCI_MSTR_IO_LOCAL CONFIG_SYS_PCI_MSTR_IO_LOCAL +#endif + +#ifndef CONFIG_SYS_PCI_MSTR_IO_BUS +#define PCI_MSTR_IO_BUS 0xA0000000 /* PCI base */ +#else +#define PCI_MSTR_IO_BUS CONFIG_SYS_PCI_MSTR_IO_BUS +#endif + +#ifndef CONFIG_SYS_CPU_PCI_IO_START +#define CPU_PCI_IO_START PCI_MSTR_IO_LOCAL +#else +#define CPU_PCI_IO_START CONFIG_SYS_CPU_PCI_IO_START +#endif + +#ifndef CONFIG_SYS_PCI_MSTR_IO_SIZE +#define PCI_MSTR_IO_SIZE 0x10000000 /* 256MB */ +#else +#define PCI_MSTR_IO_SIZE CONFIG_SYS_PCI_MSTR_IO_SIZE +#endif + +#ifndef CONFIG_SYS_POCMR2_MASK_ATTRIB +#define POCMR2_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PCI_IO) +#else +#define POCMR2_MASK_ATTRIB CONFIG_SYS_POCMR2_MASK_ATTRIB +#endif + +/* PCI bus configuration registers. + */ + +#define PCI_CLASS_BRIDGE_CTLR 0x06 + + +static inline void pci_outl (u32 addr, u32 data) +{ + *(volatile u32 *) addr = cpu_to_le32 (data); +} + +void pci_mpc8250_init (struct pci_controller *hose) +{ + u16 tempShort; + + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; + pci_dev_t host_devno = PCI_BDF (0, 0, 0); + + pci_setup_indirect (hose, CONFIG_SYS_IMMR + PCI_CFG_ADDR_REG, + CONFIG_SYS_IMMR + PCI_CFG_DATA_REG); + + /* + * Setting required to enable local bus for PCI (SIUMCR [LBPC]). + */ +#ifdef CONFIG_MPC8266ADS + immap->im_siu_conf.sc_siumcr = + (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11) + | SIUMCR_LBPC01; +#elif defined(CONFIG_ADSTYPE) && CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS +/* nothing to do for this board here */ +#elif defined CONFIG_MPC8272 + immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr & + ~SIUMCR_BBD & + ~SIUMCR_ESE & + ~SIUMCR_PBSE & + ~SIUMCR_CDIS & + ~SIUMCR_DPPC11 & + ~SIUMCR_L2CPC11 & + ~SIUMCR_LBPC11 & + ~SIUMCR_APPC11 & + ~SIUMCR_CS10PC11 & + ~SIUMCR_BCTLC11 & + ~SIUMCR_MMR11) + | SIUMCR_DPPC11 + | SIUMCR_L2CPC01 + | SIUMCR_LBPC00 + | SIUMCR_APPC10 + | SIUMCR_CS10PC00 + | SIUMCR_BCTLC00 + | SIUMCR_MMR11; +#elif defined(CONFIG_TQM8272) +/* nothing to do for this Board here */ +#else + /* + * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), + * and local bus for PCI (SIUMCR [LBPC]). + */ + immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr & + ~SIUMCR_LBPC11 & + ~SIUMCR_CS10PC11 & + ~SIUMCR_LBPC11) | + SIUMCR_LBPC01 | + SIUMCR_CS10PC01 | + SIUMCR_APPC10; +#endif + + /* Make PCI lowest priority */ + /* Each 4 bits is a device bus request and the MS 4bits + is highest priority */ + /* Bus 4bit value + --- ---------- + CPM high 0b0000 + CPM middle 0b0001 + CPM low 0b0010 + PCI reguest 0b0011 + Reserved 0b0100 + Reserved 0b0101 + Internal Core 0b0110 + External Master 1 0b0111 + External Master 2 0b1000 + External Master 3 0b1001 + The rest are reserved */ + immap->im_siu_conf.sc_ppc_alrh = 0x61207893; + + /* Park bus on core while modifying PCI Bus accesses */ + immap->im_siu_conf.sc_ppc_acr = 0x6; + + /* + * Set up master windows that allow the CPU to access PCI space. These + * windows are set up using the two SIU PCIBR registers. + */ + immap->im_memctl.memc_pcimsk0 = PCIMSK0_MASK; + immap->im_memctl.memc_pcibr0 = PCI_MSTR0_LOCAL | PCIBR_ENABLE; + +#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 + immap->im_memctl.memc_pcimsk1 = PCIMSK1_MASK; + immap->im_memctl.memc_pcibr1 = PCI_MSTR1_LOCAL | PCIBR_ENABLE; +#endif + + /* Release PCI RST (by default the PCI RST signal is held low) */ + immap->im_pci.pci_gcr = cpu_to_le32 (PCIGCR_PCI_BUS_EN); + + /* give it some time */ + { +#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 + /* Give the PCI cards more time to initialize before query + This might be good for other boards also + */ + int i; + + for (i = 0; i < 1000; ++i) +#endif + udelay (1000); + } + + /* + * Set up master window that allows the CPU to access PCI Memory (prefetch) + * space. This window is set up using the first set of Outbound ATU registers. + */ + immap->im_pci.pci_potar0 = cpu_to_le32 (PCI_MSTR_MEM_BUS >> 12); /* PCI base */ + immap->im_pci.pci_pobar0 = cpu_to_le32 (PCI_MSTR_MEM_LOCAL >> 12); /* Local base */ + immap->im_pci.pci_pocmr0 = cpu_to_le32 (POCMR0_MASK_ATTRIB); /* Size & attribute */ + + /* + * Set up master window that allows the CPU to access PCI Memory (non-prefetch) + * space. This window is set up using the second set of Outbound ATU registers. + */ + immap->im_pci.pci_potar1 = cpu_to_le32 (PCI_MSTR_MEMIO_BUS >> 12); /* PCI base */ + immap->im_pci.pci_pobar1 = cpu_to_le32 (PCI_MSTR_MEMIO_LOCAL >> 12); /* Local base */ + immap->im_pci.pci_pocmr1 = cpu_to_le32 (POCMR1_MASK_ATTRIB); /* Size & attribute */ + + /* + * Set up master window that allows the CPU to access PCI IO space. This window + * is set up using the third set of Outbound ATU registers. + */ + immap->im_pci.pci_potar2 = cpu_to_le32 (PCI_MSTR_IO_BUS >> 12); /* PCI base */ + immap->im_pci.pci_pobar2 = cpu_to_le32 (PCI_MSTR_IO_LOCAL >> 12); /* Local base */ + immap->im_pci.pci_pocmr2 = cpu_to_le32 (POCMR2_MASK_ATTRIB); /* Size & attribute */ + + /* + * Set up slave window that allows PCI masters to access MPC826x local memory. + * This window is set up using the first set of Inbound ATU registers + */ + immap->im_pci.pci_pitar0 = cpu_to_le32 (PCI_SLV_MEM_LOCAL >> 12); /* PCI base */ + immap->im_pci.pci_pibar0 = cpu_to_le32 (PCI_SLV_MEM_BUS >> 12); /* Local base */ + immap->im_pci.pci_picmr0 = cpu_to_le32 (PICMR0_MASK_ATTRIB); /* Size & attribute */ + + /* See above for description - puts PCI request as highest priority */ +#ifdef CONFIG_MPC8272 + immap->im_siu_conf.sc_ppc_alrh = 0x01236745; +#else + immap->im_siu_conf.sc_ppc_alrh = 0x03124567; +#endif + + /* Park the bus on the PCI */ + immap->im_siu_conf.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI; + + /* Host mode - specify the bridge as a host-PCI bridge */ + + pci_hose_write_config_byte (hose, host_devno, PCI_CLASS_CODE, + PCI_CLASS_BRIDGE_CTLR); + + /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */ + pci_hose_read_config_word (hose, host_devno, PCI_COMMAND, &tempShort); + pci_hose_write_config_word (hose, host_devno, PCI_COMMAND, + tempShort | PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY); + + /* do some bridge init, should be done on all 8260 based bridges */ + pci_hose_write_config_byte (hose, host_devno, PCI_CACHE_LINE_SIZE, + 0x08); + pci_hose_write_config_byte (hose, host_devno, PCI_LATENCY_TIMER, + 0xF8); + + hose->first_busno = 0; + hose->last_busno = 0xff; + + /* System memory space */ +#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 || defined CONFIG_PM826 + pci_set_region (hose->regions + 0, + PCI_SLV_MEM_BUS, + PCI_SLV_MEM_LOCAL, + gd->ram_size, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); +#else + pci_set_region (hose->regions + 0, + CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_BASE, + 0x4000000, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); +#endif + + /* PCI memory space */ +#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 + pci_set_region (hose->regions + 1, + PCI_MSTR_MEMIO_BUS, + PCI_MSTR_MEMIO_LOCAL, + PCI_MSTR_MEMIO_SIZE, PCI_REGION_MEM); +#else + pci_set_region (hose->regions + 1, + PCI_MSTR_MEM_BUS, + PCI_MSTR_MEM_LOCAL, + PCI_MSTR_MEM_SIZE, PCI_REGION_MEM); +#endif + + /* PCI I/O space */ + pci_set_region (hose->regions + 2, + PCI_MSTR_IO_BUS, + PCI_MSTR_IO_LOCAL, PCI_MSTR_IO_SIZE, PCI_REGION_IO); + + hose->region_count = 3; + + pci_register_hose (hose); + /* Mask off master abort machine checks */ + immap->im_pci.pci_emr &= cpu_to_le32 (~PCI_ERROR_PCI_NO_RSP); + eieio (); + + hose->last_busno = pci_hose_scan (hose); + + + /* clear the error in the error status register */ + immap->im_pci.pci_esr = cpu_to_le32 (PCI_ERROR_PCI_NO_RSP); + + /* unmask master abort machine checks */ + immap->im_pci.pci_emr |= cpu_to_le32 (PCI_ERROR_PCI_NO_RSP); +} + +#if defined(CONFIG_OF_LIBFDT) +void ft_pci_setup(void *blob, bd_t *bd) +{ + do_fixup_by_prop_u32(blob, "device_type", "pci", 4, + "clock-frequency", gd->pci_clk, 1); +} +#endif + +#endif /* CONFIG_PCI */ |