summaryrefslogtreecommitdiff
path: root/arch/powerpc/cpu/mpc5xxx/start.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/cpu/mpc5xxx/start.S')
-rw-r--r--arch/powerpc/cpu/mpc5xxx/start.S780
1 files changed, 0 insertions, 780 deletions
diff --git a/arch/powerpc/cpu/mpc5xxx/start.S b/arch/powerpc/cpu/mpc5xxx/start.S
deleted file mode 100644
index b4c5543eb5..0000000000
--- a/arch/powerpc/cpu/mpc5xxx/start.S
+++ /dev/null
@@ -1,780 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000 - 2003 Wolfgang Denk <wd@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * U-Boot - Startup Code for MPC5xxx CPUs
- */
-#include <asm-offsets.h>
-#include <config.h>
-#include <mpc5xxx.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <asm/u-boot.h>
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-/* Floating Point enable, Machine Check and Recoverable Interr. */
-#ifdef DEBUG
-#define MSR_KERNEL (MSR_FP|MSR_RI)
-#else
-#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
-#endif
-
-#ifndef CONFIG_SPL_BUILD
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(__bss_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-#endif
-
-/*
- * Version string
- */
- .data
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION_STRING, "\0"
-
-/*
- * Exception vectors
- */
- .text
- . = EXC_OFF_SYS_RESET
- .globl _start
-_start:
-
-#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
- /*
- * This is the entry of the real U-Boot from a board port
- * that supports SPL booting on the MPC5200. We only need
- * to call board_init_f() here. Everything else has already
- * been done in the SPL u-boot version.
- */
- GET_GOT /* initialize GOT access */
-
- /*
- * The GD (global data) struct needs to get cleared. Lets do
- * this by calling memset().
- * This function is called when the platform is build with SPL
- * support from the main (full-blown) U-Boot. And the GD needs
- * to get cleared (again) so that the following generic
- * board support code initializes all variables correctly.
- */
- mr r3, r2 /* parameter 1: GD pointer */
- li r4,0 /* parameter 2: value to fill */
- li r5,GD_SIZE /* parameter 3: count */
- bl memset
-
- li r3, 0 /* parameter 1: bootflag */
- bl board_init_f /* run 1st part of board init code (in Flash)*/
- /* NOTREACHED - board_init_f() does not return */
-#else
- mfmsr r5 /* save msr contents */
-
- /* Move CSBoot and adjust instruction pointer */
- /*--------------------------------------------------------------*/
-
-#if defined(CONFIG_SYS_LOWBOOT)
-# if defined(CONFIG_SYS_RAMBOOT)
-# error CONFIG_SYS_LOWBOOT is incompatible with CONFIG_SYS_RAMBOOT
-# endif /* CONFIG_SYS_RAMBOOT */
- lis r4, CONFIG_SYS_DEFAULT_MBAR@h
- lis r3, START_REG(CONFIG_SYS_BOOTCS_START)@h
- ori r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l
- stw r3, 0x4(r4) /* CS0 start */
- lis r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@h
- ori r3, r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@l
- stw r3, 0x8(r4) /* CS0 stop */
- lis r3, 0x02010000@h
- ori r3, r3, 0x02010000@l
- stw r3, 0x54(r4) /* CS0 and Boot enable */
-
- lis r3, lowboot_reentry@h /* jump from bootlow address space (0x0000xxxx) */
- ori r3, r3, lowboot_reentry@l /* to the address space the linker used */
- mtlr r3
- blr
-
-lowboot_reentry:
- lis r3, START_REG(CONFIG_SYS_BOOTCS_START)@h
- ori r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l
- stw r3, 0x4c(r4) /* Boot start */
- lis r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@h
- ori r3, r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@l
- stw r3, 0x50(r4) /* Boot stop */
- lis r3, 0x02000001@h
- ori r3, r3, 0x02000001@l
- stw r3, 0x54(r4) /* Boot enable, CS0 disable */
-#endif /* CONFIG_SYS_LOWBOOT */
-
-#if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT)
- lis r3, CONFIG_SYS_MBAR@h
- ori r3, r3, CONFIG_SYS_MBAR@l
- /* MBAR is mirrored into the MBAR SPR */
- mtspr MBAR,r3
- rlwinm r3, r3, 16, 16, 31
- lis r4, CONFIG_SYS_DEFAULT_MBAR@h
- stw r3, 0(r4)
-#endif /* CONFIG_SYS_DEFAULT_MBAR */
-
- /* Initialise the MPC5xxx processor core */
- /*--------------------------------------------------------------*/
-
- bl init_5xxx_core
-
- /* initialize some things that are hard to access from C */
- /*--------------------------------------------------------------*/
-
- /* set up stack in on-chip SRAM */
- lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
- ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*--------------------------------------------------------------*/
-
-#ifndef CONFIG_SPL_BUILD
- GET_GOT /* initialize GOT access */
-#endif
-
- /* r3: IMMR */
- bl cpu_init_f /* run low-level CPU init code (in Flash)*/
-
- li r3, 0 /* parameter 1: bootflag */
- bl board_init_f /* run 1st part of board init code (in Flash)*/
-
- /* NOTREACHED - board_init_f() does not return */
-#endif
-
-#ifndef CONFIG_SPL_BUILD
-/*
- * Vector Table
- */
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
-
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
- STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
-#ifdef DEBUG
- . = 0x1300
- /*
- * This exception occurs when the program counter matches the
- * Instruction Address Breakpoint Register (IABR).
- *
- * I want the cpu to halt if this occurs so I can hunt around
- * with the debugger and look at things.
- *
- * When DEBUG is defined, both machine check enable (in the MSR)
- * and checkstop reset enable (in the reset mode register) are
- * turned off and so a checkstop condition will result in the cpu
- * halting.
- *
- * I force the cpu into a checkstop condition by putting an illegal
- * instruction here (at least this is the theory).
- *
- * well - that didnt work, so just do an infinite loop!
- */
-1: b 1b
-#else
- STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
-#endif
- STD_EXCEPTION(0x1400, SMI, UnknownException)
-
- STD_EXCEPTION(0x1500, Trap_15, UnknownException)
- STD_EXCEPTION(0x1600, Trap_16, UnknownException)
- STD_EXCEPTION(0x1700, Trap_17, UnknownException)
- STD_EXCEPTION(0x1800, Trap_18, UnknownException)
- STD_EXCEPTION(0x1900, Trap_19, UnknownException)
- STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
- STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
- STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
- STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
- STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
- STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
- STD_EXCEPTION(0x2000, Trap_20, UnknownException)
- STD_EXCEPTION(0x2100, Trap_21, UnknownException)
- STD_EXCEPTION(0x2200, Trap_22, UnknownException)
- STD_EXCEPTION(0x2300, Trap_23, UnknownException)
- STD_EXCEPTION(0x2400, Trap_24, UnknownException)
- STD_EXCEPTION(0x2500, Trap_25, UnknownException)
- STD_EXCEPTION(0x2600, Trap_26, UnknownException)
- STD_EXCEPTION(0x2700, Trap_27, UnknownException)
- STD_EXCEPTION(0x2800, Trap_28, UnknownException)
- STD_EXCEPTION(0x2900, Trap_29, UnknownException)
- STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
- STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
- STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
- STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
- STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
- STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
-
-
- .globl _end_of_vectors
-_end_of_vectors:
-
- . = 0x3000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-#endif /* CONFIG_SPL_BUILD */
-
-/*
- * This code initialises the MPC5xxx processor core
- * (conforms to PowerPC 603e spec)
- * Note: expects original MSR contents to be in r5.
- */
-
- .globl init_5xx_core
-init_5xxx_core:
-
- /* Initialize machine status; enable machine check interrupt */
- /*--------------------------------------------------------------*/
-
- li r3, MSR_KERNEL /* Set ME and RI flags */
- rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
-#ifdef DEBUG
- rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
-#endif
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
- mtspr SRR1, r3 /* Make SRR1 match MSR */
-
- /* Initialize the Hardware Implementation-dependent Registers */
- /* HID0 also contains cache control */
- /*--------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_HID0_INIT@h
- ori r3, r3, CONFIG_SYS_HID0_INIT@l
- SYNC
- mtspr HID0, r3
-
- lis r3, CONFIG_SYS_HID0_FINAL@h
- ori r3, r3, CONFIG_SYS_HID0_FINAL@l
- SYNC
- mtspr HID0, r3
-
- /* clear all BAT's */
- /*--------------------------------------------------------------*/
-
- li r0, 0
- mtspr DBAT0U, r0
- mtspr DBAT0L, r0
- mtspr DBAT1U, r0
- mtspr DBAT1L, r0
- mtspr DBAT2U, r0
- mtspr DBAT2L, r0
- mtspr DBAT3U, r0
- mtspr DBAT3L, r0
- mtspr DBAT4U, r0
- mtspr DBAT4L, r0
- mtspr DBAT5U, r0
- mtspr DBAT5L, r0
- mtspr DBAT6U, r0
- mtspr DBAT6L, r0
- mtspr DBAT7U, r0
- mtspr DBAT7L, r0
- mtspr IBAT0U, r0
- mtspr IBAT0L, r0
- mtspr IBAT1U, r0
- mtspr IBAT1L, r0
- mtspr IBAT2U, r0
- mtspr IBAT2L, r0
- mtspr IBAT3U, r0
- mtspr IBAT3L, r0
- mtspr IBAT4U, r0
- mtspr IBAT4L, r0
- mtspr IBAT5U, r0
- mtspr IBAT5L, r0
- mtspr IBAT6U, r0
- mtspr IBAT6L, r0
- mtspr IBAT7U, r0
- mtspr IBAT7L, r0
- SYNC
-
- /* invalidate all tlb's */
- /* */
- /* From the 603e User Manual: "The 603e provides the ability to */
- /* invalidate a TLB entry. The TLB Invalidate Entry (tlbie) */
- /* instruction invalidates the TLB entry indexed by the EA, and */
- /* operates on both the instruction and data TLBs simultaneously*/
- /* invalidating four TLB entries (both sets in each TLB). The */
- /* index corresponds to bits 15-19 of the EA. To invalidate all */
- /* entries within both TLBs, 32 tlbie instructions should be */
- /* issued, incrementing this field by one each time." */
- /* */
- /* "Note that the tlbia instruction is not implemented on the */
- /* 603e." */
- /* */
- /* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */
- /* incrementing by 0x1000 each time. The code below is sort of */
- /* based on code in "flush_tlbs" from arch/powerpc/kernel/head.S */
- /* */
- /*--------------------------------------------------------------*/
-
- li r3, 32
- mtctr r3
- li r3, 0
-1: tlbie r3
- addi r3, r3, 0x1000
- bdnz 1b
- SYNC
-
- /* Done! */
- /*--------------------------------------------------------------*/
-
- blr
-
-/* Cache functions.
- *
- * Note: requires that all cache bits in
- * HID0 are in the low half word.
- */
- .globl icache_enable
-icache_enable:
- mfspr r3, HID0
- ori r3, r3, HID0_ICE
- lis r4, 0
- ori r4, r4, HID0_ILOCK
- andc r3, r3, r4
- ori r4, r3, HID0_ICFI
- isync
- mtspr HID0, r4 /* sets enable and invalidate, clears lock */
- isync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl icache_disable
-icache_disable:
- mfspr r3, HID0
- lis r4, 0
- ori r4, r4, HID0_ICE|HID0_ILOCK
- andc r3, r3, r4
- ori r4, r3, HID0_ICFI
- isync
- mtspr HID0, r4 /* sets invalidate, clears enable and lock */
- isync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl icache_status
-icache_status:
- mfspr r3, HID0
- rlwinm r3, r3, HID0_ICE_BITPOS + 1, 31, 31
- blr
-
- .globl dcache_enable
-dcache_enable:
- mfspr r3, HID0
- ori r3, r3, HID0_DCE
- lis r4, 0
- ori r4, r4, HID0_DLOCK
- andc r3, r3, r4
- ori r4, r3, HID0_DCI
- sync
- mtspr HID0, r4 /* sets enable and invalidate, clears lock */
- sync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl dcache_disable
-dcache_disable:
- mfspr r3, HID0
- lis r4, 0
- ori r4, r4, HID0_DCE|HID0_DLOCK
- andc r3, r3, r4
- ori r4, r3, HID0_DCI
- sync
- mtspr HID0, r4 /* sets invalidate, clears enable and lock */
- sync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl dcache_status
-dcache_status:
- mfspr r3, HID0
- rlwinm r3, r3, HID0_DCE_BITPOS + 1, 31, 31
- blr
-
- .globl get_svr
-get_svr:
- mfspr r3, SVR
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-#ifndef CONFIG_SPL_BUILD
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mfspr r7,HID0 /* don't do dcbst if dcache is disabled */
- rlwinm r7,r7,HID0_DCE_BITPOS+1,31,31
- cmpwi r7,0
- beq 9f
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
-9: mfspr r7,HID0 /* don't do icbi if icache is disabled */
- rlwinm r7,r7,HID0_ICE_BITPOS+1,31,31
- cmpwi r7,0
- beq 7f
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- cmpwi r0,0
- add r0,r0,r11
- stw r4,0(r3)
- beq- 5f
- stw r0,0(r4)
-5: bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(__bss_end)
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
-
- mr r3, r9 /* Global Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mfmsr r3 /* now that the vectors have */
- lis r7, MSR_IP@h /* relocated into low memory */
- ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
- andc r3, r3, r7 /* (if it was on) */
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
-
- mtlr r4 /* restore link register */
- blr
-
-#endif /* CONFIG_SPL_BUILD */