diff options
Diffstat (limited to 'arch/arm')
30 files changed, 1379 insertions, 197 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index cee10f533f..5726156a2d 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -71,7 +71,8 @@ dtb-$(CONFIG_MACH_S700) += \ dtb-$(CONFIG_ROCKCHIP_PX30) += \ px30-evb.dtb \ - px30-firefly.dtb + px30-firefly.dtb \ + rk3326-odroid-go2.dtb dtb-$(CONFIG_ROCKCHIP_RK3036) += \ rk3036-sdk.dtb @@ -135,7 +136,9 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \ rk3399-puma-haikou.dtb \ rk3399-roc-pc.dtb \ rk3399-roc-pc-mezzanine.dtb \ - rk3399-rock-pi-4.dtb \ + rk3399-rock-pi-4a.dtb \ + rk3399-rock-pi-4b.dtb \ + rk3399-rock-pi-4c.dtb \ rk3399-rock960.dtb \ rk3399-rockpro64.dtb \ rk3399pro-rock-pi-n10.dtb diff --git a/arch/arm/dts/rk3288-rock-pi-n8.dts b/arch/arm/dts/rk3288-rock-pi-n8.dts index c8637a50c1..c9894a60e7 100644 --- a/arch/arm/dts/rk3288-rock-pi-n8.dts +++ b/arch/arm/dts/rk3288-rock-pi-n8.dts @@ -7,8 +7,8 @@ /dts-v1/; #include "rk3288.dtsi" -#include "rk3288-vmarc-som.dtsi" #include <rockchip-radxa-dalang-carrier.dtsi> +#include "rk3288-vmarc-som.dtsi" / { model = "Radxa ROCK Pi N8"; diff --git a/arch/arm/dts/rk3288-vmarc-som.dtsi b/arch/arm/dts/rk3288-vmarc-som.dtsi index 3cffe61cdf..717cb3dc81 100644 --- a/arch/arm/dts/rk3288-vmarc-som.dtsi +++ b/arch/arm/dts/rk3288-vmarc-som.dtsi @@ -7,35 +7,17 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/pwm/pwm.h> / { compatible = "vamrs,rk3288-vmarc-som", "rockchip,rk3288"; - ext_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - #clock-cells = <0>; - }; - vccio_flash: vccio-flash-regulator { compatible = "regulator-fixed"; regulator-name = "vccio_flash"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - startup-delay-us = <150>; vin-supply = <&vcc_io>; }; - - vcc_sys: vsys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; }; &emmc { @@ -45,23 +27,21 @@ non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vccio_flash>; status = "okay"; }; &gmac { assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - clock_in_out = "input"; - phy-mode = "rgmii"; phy-supply = <&vcc_io>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x30>; - rx_delay = <0x10>; - max-speed = <1000>; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec_c0>; }; &i2c0 { @@ -80,37 +60,37 @@ #clock-cells = <1>; clock-output-names = "rk808-clkout1", "rk808-clkout2"; - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; vcc8-supply = <&vcc_io>; vcc9-supply = <&vcc_io>; - vcc10-supply = <&vcc_sys>; - vcc11-supply = <&vcc_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; vcc12-supply = <&vcc_io>; vddio-supply = <&vcc_io>; regulators { vdd_cpu: DCDC_REG1 { + regulator-name = "vdd_arm"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1400000>; - regulator-name = "vdd_arm"; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1250000>; - regulator-name = "vdd_gpu"; regulator-ramp-delay = <6000>; regulator-state-mem { regulator-off-in-suspend; @@ -118,20 +98,20 @@ }; vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; regulator-always-on; regulator-boot-on; - regulator-name = "vcc_ddr"; regulator-state-mem { regulator-on-in-suspend; }; }; vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcc_io"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; @@ -139,22 +119,22 @@ }; vcc_tp: LDO_REG1 { + regulator-name = "vcc_tp"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcc_tp"; regulator-state-mem { regulator-off-in-suspend; }; }; vcca_codec: LDO_REG2 { + regulator-name = "vcca_codec"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcca_codec"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; @@ -162,11 +142,11 @@ }; vdd_10: LDO_REG3 { + regulator-name = "vdd_10"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; - regulator-name = "vdd_10"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1000000>; @@ -174,22 +154,22 @@ }; vcc_wl: LDO_REG4 { + regulator-name = "vcc_wl"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc_wl"; regulator-state-mem { regulator-on-in-suspend; }; }; vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; @@ -197,22 +177,22 @@ }; vdd10_lcd: LDO_REG6 { + regulator-name = "vdd10_lcd"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; - regulator-name = "vdd10_lcd"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_18: LDO_REG7 { + regulator-name = "vcc_18"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc_18"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; @@ -220,29 +200,29 @@ }; vcc18_lcd: LDO_REG8 { + regulator-name = "vcc18_lcd"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_lcd"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_sd: SWITCH_REG1 { + regulator-name = "vcc_sd"; regulator-always-on; regulator-boot-on; - regulator-name = "vcc_sd"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_lcd: SWITCH_REG2 { + regulator-name = "vcc_lcd"; regulator-always-on; regulator-boot-on; - regulator-name = "vcc_lcd"; regulator-state-mem { regulator-off-in-suspend; }; @@ -251,6 +231,10 @@ }; }; +&i2c5 { + status = "okay"; +}; + &pinctrl { pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { drive-strength = <8>; @@ -277,13 +261,53 @@ }; sdmmc_clk: sdmmc-clk { - rockchip,pins = - <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = - <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>; }; }; + + vbus_host { + usb1_en_oc: usb1-en-oc { + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + vbus_typec { + usb0_en_oc: usb0-en-oc { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1 { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&vbus_host { + enable-active-high; + gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */ +}; + +&vbus_typec { + enable-active-high; + gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */ }; diff --git a/arch/arm/dts/rk3288.dtsi b/arch/arm/dts/rk3288.dtsi index 866fc08215..22bb06cec5 100644 --- a/arch/arm/dts/rk3288.dtsi +++ b/arch/arm/dts/rk3288.dtsi @@ -431,7 +431,16 @@ status = "disabled"; }; - /* NOTE: ohci@ff520000 doesn't actually work on hardware */ + /* NOTE: doesn't work on RK3288, but fixed on RK3288W */ + usb_host0_ohci: usb@ff520000 { + compatible = "generic-ohci"; + reg = <0x0 0xff520000 0x0 0x100>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_USBHOST0>; + phys = <&usbphy1>; + phy-names = "usb"; + status = "disabled"; + }; usb_host1: usb@ff540000 { compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", @@ -1085,6 +1094,12 @@ #interrupt-cells = <2>; }; + hdmi { + hdmi_cec_c0: hdmi-cec-c0 { + rockchip,pins = <7 RK_PC0 2 &pcfg_pull_none>; + }; + }; + pcfg_pull_up: pcfg-pull-up { bias-pull-up; }; diff --git a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi new file mode 100644 index 0000000000..00767d2abd --- /dev/null +++ b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH + */ + +/ { + chosen { + u-boot,spl-boot-order = &sdmmc; + }; +}; + +&cru { + u-boot,dm-pre-reloc; +}; + +&dmc { + u-boot,dm-pre-reloc; +}; + +&gpio0 { + u-boot,dm-pre-reloc; +}; + +&gpio1 { + u-boot,dm-pre-reloc; +}; + +&gpio2 { + u-boot,dm-pre-reloc; +}; + +&gpio3 { + u-boot,dm-pre-reloc; +}; + +&grf { + u-boot,dm-pre-reloc; +}; + +&pmucru { + u-boot,dm-pre-reloc; +}; + +&pmugrf { + u-boot,dm-pre-reloc; +}; + +&saradc { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&sdmmc { + u-boot,dm-pre-reloc; + + /* mmc to sram can't do dma, prevent aborts transferring TF-A parts */ + u-boot,spl-fifo-mode; +}; + +&uart1 { + clock-frequency = <24000000>; + u-boot,dm-pre-reloc; +}; + +&uart2 { + clock-frequency = <24000000>; + u-boot,dm-pre-reloc; +}; + +&xin24m { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/rk3326-odroid-go2.dts b/arch/arm/dts/rk3326-odroid-go2.dts new file mode 100644 index 0000000000..8cd4688c49 --- /dev/null +++ b/arch/arm/dts/rk3326-odroid-go2.dts @@ -0,0 +1,716 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Hardkernel Co., Ltd + * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3326.dtsi" + +/ { + model = "ODROID-GO Advance"; + compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc_bl>; + pwms = <&pwm1 0 25000 0>; + }; + + adc-joystick { + compatible = "adc-joystick"; + io-channels = <&saradc 1>, + <&saradc 2>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-range = <172 772>; + abs-fuzz = <10>; + abs-flat = <10>; + linux,code = <ABS_X>; + }; + + axis@1 { + reg = <1>; + abs-range = <278 815>; + abs-fuzz = <10>; + abs-flat = <10>; + linux,code = <ABS_Y>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&btn_pins>; + + /* + * *** ODROIDGO2-Advance Switch layout *** + * |------------------------------------------------| + * | sw15 sw16 | + * |------------------------------------------------| + * | sw1 |-------------------| sw8 | + * | sw3 sw4 | | sw7 sw5 | + * | sw2 | LCD Display | sw6 | + * | | | | + * | |-------------------| | + * | sw9 sw10 sw11 sw12 sw13 sw14 | + * |------------------------------------------------| + */ + + sw1 { + gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>; + label = "DPAD-UP"; + linux,code = <BTN_DPAD_UP>; + }; + sw2 { + gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>; + label = "DPAD-DOWN"; + linux,code = <BTN_DPAD_DOWN>; + }; + sw3 { + gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; + label = "DPAD-LEFT"; + linux,code = <BTN_DPAD_LEFT>; + }; + sw4 { + gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>; + label = "DPAD-RIGHT"; + linux,code = <BTN_DPAD_RIGHT>; + }; + sw5 { + gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>; + label = "BTN-A"; + linux,code = <BTN_EAST>; + }; + sw6 { + gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>; + label = "BTN-B"; + linux,code = <BTN_SOUTH>; + }; + sw7 { + gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>; + label = "BTN-Y"; + linux,code = <BTN_WEST>; + }; + sw8 { + gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>; + label = "BTN-X"; + linux,code = <BTN_NORTH>; + }; + sw9 { + gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; + label = "F1"; + linux,code = <BTN_TRIGGER_HAPPY1>; + }; + sw10 { + gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>; + label = "F2"; + linux,code = <BTN_TRIGGER_HAPPY2>; + }; + sw11 { + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; + label = "F3"; + linux,code = <BTN_TRIGGER_HAPPY3>; + }; + sw12 { + gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>; + label = "F4"; + linux,code = <BTN_TRIGGER_HAPPY4>; + }; + sw13 { + gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>; + label = "F5"; + linux,code = <BTN_TRIGGER_HAPPY5>; + }; + sw14 { + gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>; + label = "F6"; + linux,code = <BTN_TRIGGER_HAPPY6>; + }; + sw15 { + gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>; + label = "TOP-LEFT"; + linux,code = <BTN_TL>; + }; + sw16 { + gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>; + label = "TOP-RIGHT"; + linux,code = <BTN_TR>; + }; + }; + + leds: gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&blue_led_pin>; + + blue_led: led-0 { + label = "blue:heartbeat"; + gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + rk817-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "rockchip,rk817-codec"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "MIC_IN", "Mic Jack", + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR"; + simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; + simple-audio-card,codec-hp-det = <1>; + + simple-audio-card,cpu { + sound-dai = <&i2s1_2ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk817_codec>; + }; + }; + + vccsys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v8_sys"; + regulator-always-on; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + }; + + vcc_host: vcc_host { + compatible = "regulator-fixed"; + regulator-name = "vcc_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + vin-supply = <&vccsys>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&cru { + assigned-clocks = <&cru PLL_NPLL>, + <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, + <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, + <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>, + <&cru PLL_CPLL>; + + assigned-clock-rates = <1188000000>, + <200000000>, <200000000>, + <150000000>, <150000000>, + <100000000>, <200000000>, + <17000000>; +}; + +&display_subsystem { + status = "okay"; +}; + +&dsi { + status = "okay"; + + ports { + mipi_out: port@1 { + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + panel@0 { + compatible = "elida,kd35t133"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc_lcd>; + reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; + vdd-supply = <&vcc_lcd>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + +&dsi_dphy { + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_logic>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <16>; + i2c-scl-rising-time-ns = <280>; + status = "okay"; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default", "pmic-sleep", + "pmic-power-off", "pmic-reset"; + pinctrl-0 = <&pmic_int>; + pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>; + pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>; + pinctrl-3 = <&soc_slppin_rst>, <&rk817_slppin_rst>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "xin32k"; + + vcc1-supply = <&vccsys>; + vcc2-supply = <&vccsys>; + vcc3-supply = <&vccsys>; + vcc4-supply = <&vccsys>; + vcc5-supply = <&vccsys>; + vcc6-supply = <&vccsys>; + vcc7-supply = <&vccsys>; + + pinctrl_rk8xx: pinctrl_rk8xx { + gpio-controller; + #gpio-cells = <2>; + + rk817_ts_gpio1: rk817_ts_gpio1 { + pins = "gpio_ts"; + function = "pin_fun1"; + /* output-low; */ + /* input-enable; */ + }; + + rk817_gt_gpio2: rk817_gt_gpio2 { + pins = "gpio_gt"; + function = "pin_fun1"; + }; + + rk817_pin_ts: rk817_pin_ts { + pins = "gpio_ts"; + function = "pin_fun0"; + }; + + rk817_pin_gt: rk817_pin_gt { + pins = "gpio_gt"; + function = "pin_fun0"; + }; + + rk817_slppin_null: rk817_slppin_null { + pins = "gpio_slp"; + function = "pin_fun0"; + }; + + rk817_slppin_slp: rk817_slppin_slp { + pins = "gpio_slp"; + function = "pin_fun1"; + }; + + rk817_slppin_pwrdn: rk817_slppin_pwrdn { + pins = "gpio_slp"; + function = "pin_fun2"; + }; + + rk817_slppin_rst: rk817_slppin_rst { + pins = "gpio_slp"; + function = "pin_fun3"; + }; + }; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-name = "vcc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v3_pmu: LDO_REG4 { + regulator-name = "vcc3v3_pmu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: LDO_REG6 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_bl: LDO_REG7 { + regulator-name = "vcc_bl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_lcd: LDO_REG8 { + regulator-name = "vcc_lcd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <2800000>; + }; + }; + + vcc_cam: LDO_REG9 { + regulator-name = "vcc_cam"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + }; + + battery { + compatible = "rk817,battery"; + ocv_table = <3500 3625 3685 3697 3718 3735 3748 + 3760 3774 3788 3802 3816 3834 3853 + 3877 3908 3946 3975 4018 4071 4106>; + + /* KPL605475 Battery Spec */ + /* + Capacity : 3.7V 3000mA + Normal Voltage = 3.7V + Cut-Off Voltage : 3.1V + Internal Impedance : 180 mOhm + Charging Voltage : 4.2V + Charging Voltage Max : 4.25V + Sample resister : 10 mohm + */ + design_capacity = <3000>; + design_qmax = <3000>; + bat_res = <180>; + sleep_enter_current = <300>; + sleep_exit_current = <300>; + sleep_filter_current = <100>; + power_off_thresd = <3500>; + zero_algorithm_vol = <3700>; + max_soc_offset = <60>; + monitor_sec = <5>; + virtual_power = <0>; + sample_res = <10>; + }; + + charger { + compatible = "rk817,charger"; + min_input_voltage = <4500>; + max_input_current = <1500>; + max_chrg_current = <2000>; + max_chrg_voltage = <4200>; + chrg_term_mode = <0>; + chrg_finish_cur = <300>; + virtual_power = <0>; + sample_res = <10>; + + /* P.C.B rev0.2 DC Detect & Charger Status LED GPIO */ + dc_det_gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; + chg_led_gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + + extcon = <&u2phy>; + }; + + rk817_codec: codec { + #sound-dai-cells = <0>; + compatible = "rockchip,rk817-codec"; + clocks = <&cru SCLK_I2S1_OUT>; + clock-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_2ch_mclk>; + hp-volume = <20>; + spk-volume = <3>; + status = "okay"; + }; + }; +}; + +/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */ +&i2c1 { + clock-frequency = <400000>; + status = "okay"; +}; + +/* I2S 1 Channel Used */ +&i2s1_2ch { + status = "okay"; +}; + +&io_domains { + vccio1-supply = <&vcc_3v3>; + vccio2-supply = <&vccio_sd>; + vccio3-supply = <&vcc_3v3>; + vccio4-supply = <&vcc_3v3>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + status = "okay"; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + card-detect-delay = <200>; + cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/ + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy { + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "disabled"; + }; +}; + +&usb20_otg { + status = "okay"; +}; + +/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer &uart1_cts>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2m1_xfer>; + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&pinctrl { + btns { + btn_pins: btn-pins { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + headphone { + hp_det: hp-det { + rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + leds { + blue_led_pin: blue-led-pin { + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + dc_det: dc-det { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pmic_int: pmic-int { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + soc_slppin_gpio: soc_slppin_gpio { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>; + }; + + soc_slppin_rst: soc_slppin_rst { + rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>; + }; + + soc_slppin_slp: soc_slppin_slp { + rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm/dts/rk3326.dtsi b/arch/arm/dts/rk3326.dtsi new file mode 100644 index 0000000000..2ba6da1251 --- /dev/null +++ b/arch/arm/dts/rk3326.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd + */ + +#include "px30.dtsi" + +&display_subsystem { + ports = <&vopb_out>; +}; + +/delete-node/ &dsi_in_vopl; +/delete-node/ &lvds_vopl_in; +/delete-node/ &vopl; +/delete-node/ &vopl_mmu; diff --git a/arch/arm/dts/rk3328-rock64-u-boot.dtsi b/arch/arm/dts/rk3328-rock64-u-boot.dtsi index f076075076..7340ef95f1 100644 --- a/arch/arm/dts/rk3328-rock64-u-boot.dtsi +++ b/arch/arm/dts/rk3328-rock64-u-boot.dtsi @@ -46,3 +46,9 @@ &vcc_sd { u-boot,dm-spl; }; + +&spi0 { + spi_flash: spiflash@0 { + u-boot,dm-pre-reloc; + }; +}; diff --git a/arch/arm/dts/rk3328-u-boot.dtsi b/arch/arm/dts/rk3328-u-boot.dtsi index c69e13e11e..1633558264 100644 --- a/arch/arm/dts/rk3328-u-boot.dtsi +++ b/arch/arm/dts/rk3328-u-boot.dtsi @@ -7,6 +7,7 @@ aliases { mmc0 = &emmc; mmc1 = &sdmmc; + spi0 = &spi0; }; chosen { @@ -66,3 +67,7 @@ &usb20_otg { hnp-srp-disable; }; + +&spi0 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/rk3399-rock-pi-4.dts b/arch/arm/dts/rk3399-rock-pi-4.dtsi index 3923ec01ef..1c55a4645b 100644 --- a/arch/arm/dts/rk3399-rock-pi-4.dts +++ b/arch/arm/dts/rk3399-rock-pi-4.dtsi @@ -11,9 +11,6 @@ #include "rk3399-opp.dtsi" / { - model = "Radxa ROCK Pi 4"; - compatible = "radxa,rockpi4", "rockchip,rk3399"; - chosen { stdout-path = "serial2:1500000n8"; }; @@ -587,17 +584,6 @@ pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; sd-uhs-sdr104; - status = "okay"; - - brcmf: wifi@1 { - compatible = "brcm,bcm4329-fmac"; - reg = <1>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; - interrupt-names = "host-wake"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_host_wake_l>; - }; }; &sdmmc { @@ -666,18 +652,6 @@ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; - }; }; &uart2 { diff --git a/arch/arm/dts/rk3399-rock-pi-4a.dts b/arch/arm/dts/rk3399-rock-pi-4a.dts new file mode 100644 index 0000000000..d96dd3ebd3 --- /dev/null +++ b/arch/arm/dts/rk3399-rock-pi-4a.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com> + * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com> + */ + +/dts-v1/; +#include "rk3399-rock-pi-4.dtsi" + +/ { + model = "Radxa ROCK Pi 4A"; + compatible = "radxa,rockpi4", "rockchip,rk3399"; +}; diff --git a/arch/arm/dts/rk3399-rock-pi-4b-u-boot.dtsi b/arch/arm/dts/rk3399-rock-pi-4b-u-boot.dtsi new file mode 100644 index 0000000000..85ee5770ad --- /dev/null +++ b/arch/arm/dts/rk3399-rock-pi-4b-u-boot.dtsi @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com> + */ + +#include "rk3399-rock-pi-4-u-boot.dtsi" diff --git a/arch/arm/dts/rk3399-rock-pi-4b.dts b/arch/arm/dts/rk3399-rock-pi-4b.dts new file mode 100644 index 0000000000..4ca970acac --- /dev/null +++ b/arch/arm/dts/rk3399-rock-pi-4b.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com> + * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com> + */ + +/dts-v1/; +#include "rk3399-rock-pi-4.dtsi" + +/ { + model = "Radxa ROCK Pi 4B"; + compatible = "radxa,rockpi4", "rockchip,rk3399"; +}; + +&sdio0 { + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&uart0 { + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + }; +}; diff --git a/arch/arm/dts/rk3399-rock-pi-4c-u-boot.dtsi b/arch/arm/dts/rk3399-rock-pi-4c-u-boot.dtsi new file mode 100644 index 0000000000..85ee5770ad --- /dev/null +++ b/arch/arm/dts/rk3399-rock-pi-4c-u-boot.dtsi @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com> + */ + +#include "rk3399-rock-pi-4-u-boot.dtsi" diff --git a/arch/arm/dts/rk3399-rock-pi-4c.dts b/arch/arm/dts/rk3399-rock-pi-4c.dts new file mode 100644 index 0000000000..9d07ebd1ec --- /dev/null +++ b/arch/arm/dts/rk3399-rock-pi-4c.dts @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2019 Radxa Limited + * Copyright (c) 2019 Amarula Solutions(India) + */ + +/dts-v1/; +#include "rk3399-rock-pi-4.dtsi" + +/ { + model = "Radxa ROCK Pi 4C"; + compatible = "radxa,rockpi4", "rockchip,rk3399"; +}; + +&sdio0 { + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&uart0 { + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + }; +}; + +&vcc5v0_host { + gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; +}; + +&vcc5v0_host_en { + rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; +}; diff --git a/arch/arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi b/arch/arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi index 946a0230db..7c66e1145a 100644 --- a/arch/arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi +++ b/arch/arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi @@ -5,3 +5,9 @@ #include "rk3399pro-u-boot.dtsi" #include "rk3399-sdram-lpddr3-4GB-1600.dtsi" + +/ { + chosen { + u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc; + }; +}; diff --git a/arch/arm/dts/rk3399pro-rock-pi-n10.dts b/arch/arm/dts/rk3399pro-rock-pi-n10.dts index 6ac2d4d721..bf026786fa 100644 --- a/arch/arm/dts/rk3399pro-rock-pi-n10.dts +++ b/arch/arm/dts/rk3399pro-rock-pi-n10.dts @@ -8,11 +8,15 @@ /dts-v1/; #include "rk3399.dtsi" #include "rk3399-opp.dtsi" -#include "rk3399pro-vmarc-som.dtsi" #include <rockchip-radxa-dalang-carrier.dtsi> +#include "rk3399pro-vmarc-som.dtsi" / { model = "Radxa ROCK Pi N10"; compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; }; diff --git a/arch/arm/dts/rk3399pro-vmarc-som.dtsi b/arch/arm/dts/rk3399pro-vmarc-som.dtsi index 6fd17e8a81..5d087be04a 100644 --- a/arch/arm/dts/rk3399pro-vmarc-som.dtsi +++ b/arch/arm/dts/rk3399pro-vmarc-som.dtsi @@ -12,30 +12,16 @@ / { compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro"; - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - vcc12v_dcin: vcc12v-dcin-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - vcc5v0_sys: vcc5v0-sys-regulator { + vcc3v3_pcie: vcc-pcie-regulator { compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; + enable-active-high; + gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwr>; + regulator-name = "vcc3v3_pcie"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; + vin-supply = <&vcc5v0_sys>; }; }; @@ -61,23 +47,20 @@ &gmac { assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x28>; - rx_delay = <0x11>; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; }; &i2c0 { clock-frequency = <400000>; - i2c-scl-rising-time-ns = <180>; i2c-scl-falling-time-ns = <30>; + i2c-scl-rising-time-ns = <180>; status = "okay"; rk809: pmic@20 { @@ -171,7 +154,8 @@ regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-state-mem { - regulator-off-in-suspend; + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; }; }; @@ -206,7 +190,8 @@ regulator-min-microvolt = <1850000>; regulator-max-microvolt = <1850000>; regulator-state-mem { - regulator-off-in-suspend; + regulator-on-in-suspend; + regulator-suspend-microvolt = <1850000>; }; }; @@ -297,11 +282,88 @@ }; }; +&i2c1 { + i2c-scl-falling-time-ns = <30>; + i2c-scl-rising-time-ns = <140>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PD6 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + &io_domains { status = "okay"; bt656-supply = <&vcca_1v8>; - sdmmc-supply = <&vccio_sd>; gpio1830-supply = <&vccio_3v0>; + sdmmc-supply = <&vccio_sd>; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + max-link-speed = <2>; + num-lanes = <4>; + pinctrl-0 = <&pcie_clkreqnb_cpm>; + pinctrl-names = "default"; + vpcie0v9-supply = <&vcca_0v9>; /* VCC_0V9_S0 */ + vpcie1v8-supply = <&vcca_1v8>; /* VCC_1V8_S0 */ + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <4 RK_PD6 0 &pcfg_pull_up>; + }; + }; + + pcie { + pcie_pwr: pcie-pwr { + rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC2 0 &pcfg_pull_up>; + }; + }; + + vbus_host { + usb1_en_oc: usb1-en-oc { + rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + vbus_typec { + usb0_en_oc: usb0-en-oc { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; }; &pmu_io_domains { @@ -322,17 +384,74 @@ max-frequency = <150000000>; }; -&tsadc { +&tcphy0 { status = "okay"; +}; + +&tsadc { rockchip,hw-tshut-mode = <1>; rockchip,hw-tshut-polarity = <1>; + status = "okay"; }; -&pinctrl { - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = - <1 RK_PC2 0 &pcfg_pull_up>; - }; +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + phy-supply = <&vbus_typec>; + status = "okay"; }; + + u2phy0_host: host-port { + phy-supply = <&vbus_host>; + status = "okay"; + }; +}; + + +&u2phy1 { + status = "okay"; + + u2phy1_host: host-port { + phy-supply = <&vbus_host>; + status = "okay"; + }; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; +}; + +&vbus_host { + enable-active-high; + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */ + pinctrl-names = "default"; + pinctrl-0 = <&usb1_en_oc>; +}; + +&vbus_typec { + enable-active-high; + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */ + pinctrl-names = "default"; + pinctrl-0 = <&usb0_en_oc>; }; diff --git a/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi index 3e54f38f0a..26b53eac47 100644 --- a/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi +++ b/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi @@ -8,36 +8,66 @@ #include <dt-bindings/pwm/pwm.h> / { - chosen { - stdout-path = "serial2:1500000n8"; + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; }; -}; -&gmac { - status = "okay"; + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vbus_host: vbus-host { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_en_oc>; + regulator-name = "vbus_host"; /* HOST-5V */ + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + vbus_typec: vbus-typec { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_en_oc>; + regulator-name = "vbus_typec"; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; }; -&i2c1 { +&gmac { + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; status = "okay"; - i2c-scl-rising-time-ns = <140>; - i2c-scl-falling-time-ns = <30>; }; -&i2c2 { +&hdmi { status = "okay"; - clock-frequency = <400000>; - - hym8563: hym8563@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "hym8563"; - pinctrl-names = "default"; - pinctrl-0 = <&hym8563_int>; - interrupt-parent = <&gpio4>; - interrupts = <30 IRQ_TYPE_LEVEL_LOW>; - }; }; &pwm0 { @@ -69,11 +99,18 @@ status = "okay"; }; -&pinctrl { - hym8563 { - hym8563_int: hym8563-int { - rockchip,pins = - <4 RK_PD6 0 &pcfg_pull_up>; - }; - }; +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; }; diff --git a/arch/arm/include/asm/arch-rockchip/cpu_rk3288.h b/arch/arm/include/asm/arch-rockchip/cpu_rk3288.h new file mode 100644 index 0000000000..7445e64b8c --- /dev/null +++ b/arch/arm/include/asm/arch-rockchip/cpu_rk3288.h @@ -0,0 +1,49 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Rockchip Electronics Co., Ltd. + */ + +#ifndef __ASM_ARCH_CPU_RK3288_H +#define __ASM_ARCH_CPU_RK3288_H + +#include <asm/io.h> + +#define ROCKCHIP_CPU_MASK 0xffff0000 +#define ROCKCHIP_CPU_RK3288 0x32880000 + +#define ROCKCHIP_SOC_MASK (ROCKCHIP_CPU_MASK | 0xff) +#define ROCKCHIP_SOC_RK3288 (ROCKCHIP_CPU_RK3288 | 0x00) +#define ROCKCHIP_SOC_RK3288W (ROCKCHIP_CPU_RK3288 | 0x01) + +#define RK3288_HDMI_PHYS 0xff980000 +#define HDMI_CONFIG0_ID 0x4 +#define RK3288W_HDMI_REVID 0x1a + +static inline int rockchip_soc_id(void) +{ + u8 reg; + +#if defined(CONFIG_ROCKCHIP_RK3288) + reg = readb(RK3288_HDMI_PHYS + HDMI_CONFIG0_ID); + if (reg == RK3288W_HDMI_REVID) + return ROCKCHIP_SOC_RK3288W; + else + return ROCKCHIP_SOC_RK3288; +#else + return 0; +#endif +} + +#define ROCKCHIP_SOC(id, ID) \ +static inline bool soc_is_##id(void) \ +{ \ + int soc_id = rockchip_soc_id(); \ + if (soc_id) \ + return ((soc_id & ROCKCHIP_SOC_MASK) == ROCKCHIP_SOC_ ##ID); \ + return false; \ +} + +ROCKCHIP_SOC(rk3288, RK3288) +ROCKCHIP_SOC(rk3288w, RK3288W) + +#endif /* __ASM_ARCH_CPU_RK3288_H */ diff --git a/arch/arm/include/asm/arch-rockchip/cru.h b/arch/arm/include/asm/arch-rockchip/cru.h index 5eb17f9d55..13ea4aba8e 100644 --- a/arch/arm/include/asm/arch-rockchip/cru.h +++ b/arch/arm/include/asm/arch-rockchip/cru.h @@ -26,9 +26,10 @@ enum { SND_GLB_TSADC_RST_ST = BIT(3), FST_GLB_WDT_RST_ST = BIT(4), SND_GLB_WDT_RST_ST = BIT(5), - GLB_RST_ST_MASK = GENMASK(5, 0), }; #define MHz 1000000 +char *get_reset_cause(void); + #endif /* _ROCKCHIP_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-rockchip/sdram_common.h b/arch/arm/include/asm/arch-rockchip/sdram_common.h index 36d31156be..5efa6e9445 100644 --- a/arch/arm/include/asm/arch-rockchip/sdram_common.h +++ b/arch/arm/include/asm/arch-rockchip/sdram_common.h @@ -114,25 +114,10 @@ struct sdram_base_params { #define SYS_REG_ENC_CS1_COL(n, ch) (((n) - 9) << (0 + 2 * (ch))) #define SYS_REG_DEC_CS1_COL(n, ch) (9 + (((n) >> (0 + 2 * (ch))) & 0x3)) -#if !defined(CONFIG_RAM_ROCKCHIP_DEBUG) -inline void sdram_print_dram_type(unsigned char dramtype) -{ -} - -inline void sdram_print_ddr_info(struct sdram_cap_info *cap_info, - struct sdram_base_params *base) -{ -} - -inline void sdram_print_stride(unsigned int stride) -{ -} -#else void sdram_print_dram_type(unsigned char dramtype); void sdram_print_ddr_info(struct sdram_cap_info *cap_info, struct sdram_base_params *base); void sdram_print_stride(unsigned int stride); -#endif /* CONFIG_RAM_ROCKCHIP_DEBUG */ void sdram_org_config(struct sdram_cap_info *cap_info, struct sdram_base_params *base, diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index e2b6326584..fcab1d5cee 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -99,6 +99,7 @@ config ROCKCHIP_RK322X config ROCKCHIP_RK3288 bool "Support Rockchip RK3288" select CPU_V7A + select OF_BOARD_SETUP select SUPPORT_SPL select SPL select SUPPORT_TPL diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile index 5b38526fe0..121f23a563 100644 --- a/arch/arm/mach-rockchip/Makefile +++ b/arch/arm/mach-rockchip/Makefile @@ -22,11 +22,14 @@ ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) # we can have the preprocessor correctly recognise both 0x0 and 0 # meaning "turn it off". obj-y += boot_mode.o -obj-$(CONFIG_DISPLAY_CPUINFO) += cpu-info.o obj-$(CONFIG_ROCKCHIP_COMMON_BOARD) += board.o obj-$(CONFIG_MISC_INIT_R) += misc.o endif +ifeq ($(CONFIG_TPL_BUILD),) +obj-$(CONFIG_DISPLAY_CPUINFO) += cpu-info.o +endif + obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram.o obj-$(CONFIG_ROCKCHIP_PX30) += px30/ diff --git a/arch/arm/mach-rockchip/cpu-info.c b/arch/arm/mach-rockchip/cpu-info.c index 21ca9dedce..d0f030109f 100644 --- a/arch/arm/mach-rockchip/cpu-info.c +++ b/arch/arm/mach-rockchip/cpu-info.c @@ -13,7 +13,7 @@ #include <asm/arch-rockchip/hardware.h> #include <linux/err.h> -static char *get_reset_cause(void) +char *get_reset_cause(void) { struct rockchip_cru *cru = rockchip_get_cru(); char *cause = NULL; @@ -41,27 +41,25 @@ static char *get_reset_cause(void) cause = "unknown reset"; } - /** - * reset_reason env is used by rk3288, due to special use case - * to figure it the boot behavior. so keep this as it is. - */ - env_set("reset_reason", cause); - - /* - * Clear glb_rst_st, so we can determine the last reset cause - * for following resets. - */ - rk_clrreg(&cru->glb_rst_st, GLB_RST_ST_MASK); - return cause; } +#if CONFIG_IS_ENABLED(DISPLAY_CPUINFO) int print_cpuinfo(void) { + char *cause = get_reset_cause(); + printf("SoC: Rockchip %s\n", CONFIG_SYS_SOC); - printf("Reset cause: %s\n", get_reset_cause()); + printf("Reset cause: %s\n", cause); + + /** + * reset_reason env is used by rk3288, due to special use case + * to figure it the boot behavior. so keep this as it is. + */ + env_set("reset_reason", cause); /* TODO print operating temparature and clock */ return 0; } +#endif diff --git a/arch/arm/mach-rockchip/px30/Kconfig b/arch/arm/mach-rockchip/px30/Kconfig index 9f3ad4f623..f5373c6f9f 100644 --- a/arch/arm/mach-rockchip/px30/Kconfig +++ b/arch/arm/mach-rockchip/px30/Kconfig @@ -3,6 +3,9 @@ if ROCKCHIP_PX30 config TARGET_EVB_PX30 bool "EVB_PX30" +config TARGET_ODROID_GO2 + bool "ODROID_GO2" + config ROCKCHIP_BOOT_MODE_REG default 0xff010200 @@ -36,6 +39,7 @@ config DEBUG_UART_CHANNEL For using the UART for early debugging the route to use needs to be declared (0 or 1). +source "board/hardkernel/odroid_go2/Kconfig" source "board/rockchip/evb_px30/Kconfig" endif diff --git a/arch/arm/mach-rockchip/rk3288/rk3288.c b/arch/arm/mach-rockchip/rk3288/rk3288.c index 804abe8a1b..1a4ecdf625 100644 --- a/arch/arm/mach-rockchip/rk3288/rk3288.c +++ b/arch/arm/mach-rockchip/rk3288/rk3288.c @@ -13,6 +13,7 @@ #include <asm/io.h> #include <asm/arch-rockchip/bootrom.h> #include <asm/arch-rockchip/clock.h> +#include <asm/arch-rockchip/cpu_rk3288.h> #include <asm/arch-rockchip/cru.h> #include <asm/arch-rockchip/hardware.h> #include <asm/arch-rockchip/grf_rk3288.h> @@ -115,6 +116,35 @@ int rk_board_late_init(void) return rk3288_board_late_init(); } +static int ft_rk3288w_setup(void *blob) +{ + const char *path; + int offs, ret; + + path = "/clock-controller@ff760000"; + offs = fdt_path_offset(blob, path); + if (offs < 0) { + debug("failed to found fdt path %s\n", path); + return offs; + } + + ret = fdt_setprop_string(blob, offs, "compatible", "rockchip,rk3288w-cru"); + if (ret) { + printf("failed to set rk3288w-cru compatible (ret=%d)\n", ret); + return ret; + } + + return ret; +} + +int ft_board_setup(void *blob, struct bd_info *bd) +{ + if (soc_is_rk3288w()) + return ft_rk3288w_setup(blob); + + return 0; +} + static int do_clock(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c index 4fda93b152..c643483971 100644 --- a/arch/arm/mach-rockchip/rk3399/rk3399.c +++ b/arch/arm/mach-rockchip/rk3399/rk3399.c @@ -241,8 +241,14 @@ static void rk3399_force_power_on_reset(void) } #endif +void __weak led_setup(void) +{ +} + void spl_board_init(void) { + led_setup(); + #if defined(SPL_GPIO_SUPPORT) struct rockchip_cru *cru = rockchip_get_cru(); diff --git a/arch/arm/mach-rockchip/sdram.c b/arch/arm/mach-rockchip/sdram.c index 24fe6cc8f0..4c637b7767 100644 --- a/arch/arm/mach-rockchip/sdram.c +++ b/arch/arm/mach-rockchip/sdram.c @@ -56,16 +56,14 @@ int dram_init_banksize(void) - CONFIG_SYS_SDRAM_BASE; gd->bd->bi_dram[1].start = tos_parameter->tee_mem.phy_addr + tos_parameter->tee_mem.size; - gd->bd->bi_dram[1].size = gd->bd->bi_dram[0].start - + top - gd->bd->bi_dram[1].start; + gd->bd->bi_dram[1].size = top - gd->bd->bi_dram[1].start; } else { gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; gd->bd->bi_dram[0].size = 0x8400000; /* Reserve 32M for OPTEE with TA */ gd->bd->bi_dram[1].start = CONFIG_SYS_SDRAM_BASE + gd->bd->bi_dram[0].size + 0x2000000; - gd->bd->bi_dram[1].size = gd->bd->bi_dram[0].start - + top - gd->bd->bi_dram[1].start; + gd->bd->bi_dram[1].size = top - gd->bd->bi_dram[1].start; } #else gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; diff --git a/arch/arm/mach-rockchip/tpl.c b/arch/arm/mach-rockchip/tpl.c index 88f80b05a9..cc908e1b0e 100644 --- a/arch/arm/mach-rockchip/tpl.c +++ b/arch/arm/mach-rockchip/tpl.c @@ -43,18 +43,11 @@ __weak void rockchip_stimer_init(void) TIMER_CONTROL_REG); } -__weak int board_early_init_f(void) -{ - return 0; -} - void board_init_f(ulong dummy) { struct udevice *dev; int ret; - board_early_init_f(); - #if defined(CONFIG_DEBUG_UART) && defined(CONFIG_TPL_SERIAL_SUPPORT) /* * Debug UART can be used from here if required: |