diff options
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/cpu/armv7/am33xx/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/am33xx/elm.c | 196 | ||||
-rw-r--r-- | arch/arm/include/asm/omap_elm.h (renamed from arch/arm/include/asm/arch-am33xx/elm.h) | 0 |
3 files changed, 0 insertions, 197 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile index 966fcab71b4..5566310d948 100644 --- a/arch/arm/cpu/armv7/am33xx/Makefile +++ b/arch/arm/cpu/armv7/am33xx/Makefile @@ -19,4 +19,3 @@ obj-y += ddr.o obj-y += emif4.o obj-y += board.o obj-y += mux.o -obj-$(CONFIG_NAND_OMAP_GPMC) += elm.o diff --git a/arch/arm/cpu/armv7/am33xx/elm.c b/arch/arm/cpu/armv7/am33xx/elm.c deleted file mode 100644 index 8f1d6afdd39..00000000000 --- a/arch/arm/cpu/armv7/am33xx/elm.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * (C) Copyright 2010-2011 Texas Instruments, <www.ti.com> - * Mansoor Ahamed <mansoor.ahamed@ti.com> - * - * BCH Error Location Module (ELM) support. - * - * NOTE: - * 1. Supports only continuous mode. Dont see need for page mode in uboot - * 2. Supports only syndrome polynomial 0. i.e. poly local variable is - * always set to ELM_DEFAULT_POLY. Dont see need for other polynomial - * sets in uboot - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/errno.h> -#include <asm/arch/cpu.h> -#include <asm/omap_gpmc.h> -#include <asm/arch/elm.h> - -#define ELM_DEFAULT_POLY (0) - -struct elm *elm_cfg; - -/** - * elm_load_syndromes - Load BCH syndromes based on nibble selection - * @syndrome: BCH syndrome - * @nibbles: - * @poly: Syndrome Polynomial set to use - * - * Load BCH syndromes based on nibble selection - */ -static void elm_load_syndromes(u8 *syndrome, u32 nibbles, u8 poly) -{ - u32 *ptr; - u32 val; - - /* reg 0 */ - ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[0]; - val = syndrome[0] | (syndrome[1] << 8) | (syndrome[2] << 16) | - (syndrome[3] << 24); - writel(val, ptr); - /* reg 1 */ - ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[1]; - val = syndrome[4] | (syndrome[5] << 8) | (syndrome[6] << 16) | - (syndrome[7] << 24); - writel(val, ptr); - - /* BCH 8-bit with 26 nibbles (4*8=32) */ - if (nibbles > 13) { - /* reg 2 */ - ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[2]; - val = syndrome[8] | (syndrome[9] << 8) | (syndrome[10] << 16) | - (syndrome[11] << 24); - writel(val, ptr); - /* reg 3 */ - ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[3]; - val = syndrome[12] | (syndrome[13] << 8) | - (syndrome[14] << 16) | (syndrome[15] << 24); - writel(val, ptr); - } - - /* BCH 16-bit with 52 nibbles (7*8=56) */ - if (nibbles > 26) { - /* reg 4 */ - ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[4]; - val = syndrome[16] | (syndrome[17] << 8) | - (syndrome[18] << 16) | (syndrome[19] << 24); - writel(val, ptr); - - /* reg 5 */ - ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[5]; - val = syndrome[20] | (syndrome[21] << 8) | - (syndrome[22] << 16) | (syndrome[23] << 24); - writel(val, ptr); - - /* reg 6 */ - ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]; - val = syndrome[24] | (syndrome[25] << 8) | - (syndrome[26] << 16) | (syndrome[27] << 24); - writel(val, ptr); - } -} - -/** - * elm_check_errors - Check for BCH errors and return error locations - * @syndrome: BCH syndrome - * @nibbles: - * @error_count: Returns number of errrors in the syndrome - * @error_locations: Returns error locations (in decimal) in this array - * - * Check the provided syndrome for BCH errors and return error count - * and locations in the array passed. Returns -1 if error is not correctable, - * else returns 0 - */ -int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count, - u32 *error_locations) -{ - u8 poly = ELM_DEFAULT_POLY; - s8 i; - u32 location_status; - - elm_load_syndromes(syndrome, nibbles, poly); - - /* start processing */ - writel((readl(&elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]) - | ELM_SYNDROME_FRAGMENT_6_SYNDROME_VALID), - &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]); - - /* wait for processing to complete */ - while ((readl(&elm_cfg->irqstatus) & (0x1 << poly)) != 0x1) - ; - /* clear status */ - writel((readl(&elm_cfg->irqstatus) | (0x1 << poly)), - &elm_cfg->irqstatus); - - /* check if correctable */ - location_status = readl(&elm_cfg->error_location[poly].location_status); - if (!(location_status & ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK)) - return -1; - - /* get error count */ - *error_count = readl(&elm_cfg->error_location[poly].location_status) & - ELM_LOCATION_STATUS_ECC_NB_ERRORS_MASK; - - for (i = 0; i < *error_count; i++) { - error_locations[i] = - readl(&elm_cfg->error_location[poly].error_location_x[i]); - } - - return 0; -} - - -/** - * elm_config - Configure ELM module - * @level: 4 / 8 / 16 bit BCH - * - * Configure ELM module based on BCH level. - * Set mode as continuous mode. - * Currently we are using only syndrome 0 and syndromes 1 to 6 are not used. - * Also, the mode is set only for syndrome 0 - */ -int elm_config(enum bch_level level) -{ - u32 val; - u8 poly = ELM_DEFAULT_POLY; - u32 buffer_size = 0x7FF; - - /* config size and level */ - val = (u32)(level) & ELM_LOCATION_CONFIG_ECC_BCH_LEVEL_MASK; - val |= ((buffer_size << ELM_LOCATION_CONFIG_ECC_SIZE_POS) & - ELM_LOCATION_CONFIG_ECC_SIZE_MASK); - writel(val, &elm_cfg->location_config); - - /* config continous mode */ - /* enable interrupt generation for syndrome polynomial set */ - writel((readl(&elm_cfg->irqenable) | (0x1 << poly)), - &elm_cfg->irqenable); - /* set continuous mode for the syndrome polynomial set */ - writel((readl(&elm_cfg->page_ctrl) & ~(0x1 << poly)), - &elm_cfg->page_ctrl); - - return 0; -} - -/** - * elm_reset - Do a soft reset of ELM - * - * Perform a soft reset of ELM and return after reset is done. - */ -void elm_reset(void) -{ - /* initiate reset */ - writel((readl(&elm_cfg->sysconfig) | ELM_SYSCONFIG_SOFTRESET), - &elm_cfg->sysconfig); - - /* wait for reset complete and normal operation */ - while ((readl(&elm_cfg->sysstatus) & ELM_SYSSTATUS_RESETDONE) != - ELM_SYSSTATUS_RESETDONE) - ; -} - -/** - * elm_init - Initialize ELM module - * - * Initialize ELM support. Currently it does only base address init - * and ELM reset. - */ -void elm_init(void) -{ - elm_cfg = (struct elm *)ELM_BASE; - elm_reset(); -} diff --git a/arch/arm/include/asm/arch-am33xx/elm.h b/arch/arm/include/asm/omap_elm.h index 45454eaf0f1..45454eaf0f1 100644 --- a/arch/arm/include/asm/arch-am33xx/elm.h +++ b/arch/arm/include/asm/omap_elm.h |