diff options
Diffstat (limited to 'arch/arm')
36 files changed, 1391 insertions, 687 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index cbb2a2a1580..3b0e315061a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1066,16 +1066,6 @@ config TARGET_VEXPRESS64_BASE_FVP select PL01X_SERIAL select SEMIHOSTING -config TARGET_VEXPRESS64_BASE_FVP_DRAM - bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" - select ARM64 - select PL01X_SERIAL - help - This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides - the default config to allow the user to load the images directly into - DRAM using model parameters rather than by using semi-hosting to load - the files from the host filesystem. - config TARGET_VEXPRESS64_JUNO bool "Support Versatile Express Juno Development Platform" select ARM64 @@ -1567,6 +1557,7 @@ config ARCH_STM32MP imply SPL_SYSRESET imply CMD_DM imply CMD_POWEROFF + imply OF_LIBFDT_OVERLAY imply ENV_VARS_UBOOT_RUNTIME_CONFIG imply USE_PREBOOT help diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 42d31fdab0a..54d03ae622d 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -245,14 +245,6 @@ config FSL_LSCH3 config NXP_LSCH3_2 bool -config FSL_MC_ENET - bool "Management Complex network" - depends on ARCH_LS2080A || ARCH_LS1088A || ARCH_LX2160A - default y - select RESV_RAM - help - Enable Management Complex (MC) network - menu "Layerscape architecture" depends on FSL_LSCH2 || FSL_LSCH3 @@ -593,15 +585,6 @@ config SYS_FSL_HAS_RGMII bool depends on SYS_FSL_EC1 || SYS_FSL_EC2 - -config SYS_MC_RSV_MEM_ALIGN - hex "Management Complex reserved memory alignment" - depends on RESV_RAM - default 0x20000000 if ARCH_LS2080A || ARCH_LS1088A || ARCH_LX2160A - help - Reserved memory needs to be aligned for MC to use. Default value - is 512MB. - config SPL_LDSCRIPT default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A diff --git a/arch/arm/dts/armada-cp110-master.dtsi b/arch/arm/dts/armada-cp110-master.dtsi index 551d00d7746..e4c17e9f4b6 100644 --- a/arch/arm/dts/armada-cp110-master.dtsi +++ b/arch/arm/dts/armada-cp110-master.dtsi @@ -96,6 +96,7 @@ #size-cells = <0>; compatible = "marvell,orion-mdio"; reg = <0x12a200 0x10>; + device-name = "cpm-mdio"; }; cpm_syscon0: system-controller@440000 { diff --git a/arch/arm/dts/armada-cp110-slave.dtsi b/arch/arm/dts/armada-cp110-slave.dtsi index 2ea9004f1d4..2fbd7b5514e 100644 --- a/arch/arm/dts/armada-cp110-slave.dtsi +++ b/arch/arm/dts/armada-cp110-slave.dtsi @@ -96,6 +96,7 @@ #size-cells = <0>; compatible = "marvell,orion-mdio"; reg = <0x12a200 0x10>; + device-name = "cps-mdio"; }; cps_syscon0: system-controller@440000 { diff --git a/arch/arm/dts/r7s72100-gr-peach-u-boot.dts b/arch/arm/dts/r7s72100-gr-peach-u-boot.dts index 28247d19d73..30e35e47d68 100644 --- a/arch/arm/dts/r7s72100-gr-peach-u-boot.dts +++ b/arch/arm/dts/r7s72100-gr-peach-u-boot.dts @@ -37,6 +37,15 @@ }; }; + reg_usbhs0_vbus: regulator-usbhs0-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbhs0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&port4 1 GPIO_ACTIVE_LOW>; + }; + + rpc: rpc@0xee200000 { compatible = "renesas,rpc-r7s72100", "renesas,rpc"; reg = <0x3fefa000 0x100>, <0x18000000 0x08000000>; @@ -76,3 +85,8 @@ &scif2_pins { u-boot,dm-pre-reloc; }; + +&usbhs0 { + vbus-supply = <®_usbhs0_vbus>; + status = "okay"; +}; diff --git a/arch/arm/dts/stih407-clock.dtsi b/arch/arm/dts/stih407-clock.dtsi index 13029c03d7c..1ab40db7c91 100644 --- a/arch/arm/dts/stih407-clock.dtsi +++ b/arch/arm/dts/stih407-clock.dtsi @@ -1,39 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics R&D Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/clock/stih407-clks.h> / { + /* + * Fixed 30MHz oscillator inputs to SoC + */ + clk_sysin: clk-sysin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <30000000>; + }; + + clk_tmdsout_hdmi: clk-tmdsout-hdmi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; ranges; /* - * Fixed 30MHz oscillator inputs to SoC - */ - clk_sysin: clk-sysin { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <30000000>; - }; - - /* - * ARM Peripheral clock for timers - */ - arm_periph_clk: clk-m-a9-periphs { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - - clocks = <&clk_m_a9>; - clock-div = <2>; - clock-mult = <1>; - }; - - /* * A9 PLL. */ clockgen-a9@92b0000 { @@ -62,35 +53,22 @@ <&clockgen_a9_pll 0>, <&clk_s_c0_flexgen 13>, <&clk_m_a9_ext2f_div2>; - }; - /* - * ARM Peripheral clock for timers - */ - clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&clk_s_c0_flexgen 13>; - - clock-output-names = "clk-m-a9-ext2f-div2"; - - clock-div = <2>; - clock-mult = <1>; - }; + /* + * ARM Peripheral clock for timers + */ + arm_periph_clk: clk-m-a9-periphs { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; - /* - * Bootloader initialized system infrastructure clock for - * serial devices. - */ - clk_ext2f_a9: clockgen-c0@13 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <200000000>; - clock-output-names = "clk-s-icn-reg-0"; + clocks = <&clk_m_a9>; + clock-div = <2>; + clock-mult = <1>; + }; }; - clockgen-a@090ff000 { + clockgen-a@90ff000 { compatible = "st,clkgen-c32"; reg = <0x90ff000 0x1000>; @@ -101,6 +79,7 @@ clocks = <&clk_sysin>; clock-output-names = "clk-s-a0-pll-ofd-0"; + clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */ }; clk_s_a0_flexgen: clk-s-a0-flexgen { @@ -112,6 +91,7 @@ <&clk_sysin>; clock-output-names = "clk-ic-lmi0"; + clock-critical = <CLK_IC_LMI0>; }; }; @@ -126,9 +106,10 @@ "clk-s-c0-fs0-ch1", "clk-s-c0-fs0-ch2", "clk-s-c0-fs0-ch3"; + clock-critical = <0>; /* clk-s-c0-fs0-ch0 */ }; - clk_s_c0: clockgen-c@09103000 { + clk_s_c0: clockgen-c@9103000 { compatible = "st,clkgen-c32"; reg = <0x9103000 0x1000>; @@ -139,6 +120,7 @@ clocks = <&clk_sysin>; clock-output-names = "clk-s-c0-pll0-odf-0"; + clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */ }; clk_s_c0_pll1: clk-s-c0-pll1 { @@ -194,6 +176,27 @@ "clk-main-disp", "clk-aux-disp", "clk-compo-dvp"; + clock-critical = <CLK_PROC_STFE>, + <CLK_ICN_CPU>, + <CLK_TX_ICN_DMU>, + <CLK_EXT2F_A9>, + <CLK_ICN_LMI>, + <CLK_ICN_SBC>; + + /* + * ARM Peripheral clock for timers + */ + clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + + clocks = <&clk_s_c0_flexgen 13>; + + clock-output-names = "clk-m-a9-ext2f-div2"; + + clock-div = <2>; + clock-mult = <1>; + }; }; }; @@ -210,7 +213,7 @@ "clk-s-d0-fs0-ch3"; }; - clockgen-d0@09104000 { + clockgen-d0@9104000 { compatible = "st,clkgen-c32"; reg = <0x9104000 0x1000>; @@ -244,13 +247,7 @@ "clk-s-d2-fs0-ch3"; }; - clk_tmdsout_hdmi: clk-tmdsout-hdmi { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - clockgen-d2@x9106000 { + clockgen-d2@9106000 { compatible = "st,clkgen-c32"; reg = <0x9106000 0x1000>; diff --git a/arch/arm/dts/stih407-family.dtsi b/arch/arm/dts/stih407-family.dtsi index 6c6de58029c..7c36c37260a 100644 --- a/arch/arm/dts/stih407-family.dtsi +++ b/arch/arm/dts/stih407-family.dtsi @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics Limited. * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include "stih407-pinctrl.dtsi" #include <dt-bindings/mfd/st-lpc.h> @@ -20,7 +17,13 @@ #size-cells = <1>; ranges; - dmu_reserved: rproc@44000000 { + gp0_reserved: rproc@45000000 { + compatible = "shared-dma-pool"; + reg = <0x45000000 0x00400000>; + no-map; + }; + + delta_reserved: rproc@44000000 { compatible = "shared-dma-pool"; reg = <0x44000000 0x01000000>; no-map; @@ -47,6 +50,7 @@ clocks = <&clk_m_a9>; clock-names = "cpu"; clock-latency = <100000>; + cpu0-supply = <&pwm_regulator>; st,syscfg = <&syscfg_core 0x8e0>; }; cpu@1 { @@ -65,19 +69,19 @@ }; }; - intc: interrupt-controller@08761000 { + intc: interrupt-controller@8761000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x08761000 0x1000>, <0x08760100 0x100>; }; - scu@08760000 { + scu@8760000 { compatible = "arm,cortex-a9-scu"; reg = <0x08760000 0x1000>; }; - timer@08760200 { + timer@8760200 { interrupt-parent = <&intc>; compatible = "arm,cortex-a9-global-timer"; reg = <0x08760200 0x100>; @@ -85,7 +89,7 @@ clocks = <&arm_periph_clk>; }; - l2: cache-controller { + l2: cache-controller@8762000 { compatible = "arm,pl310-cache"; reg = <0x08762000 0x1000>; arm,data-latency = <3 3 3>; @@ -118,24 +122,28 @@ ranges; compatible = "simple-bus"; - restart { + restart: restart-controller@0 { compatible = "st,stih407-restart"; + reg = <0 0>; st,syscfg = <&syscfg_sbc_reg>; status = "okay"; }; - powerdown: powerdown-controller { + powerdown: powerdown-controller@0 { compatible = "st,stih407-powerdown"; + reg = <0 0>; #reset-cells = <1>; }; - softreset: softreset-controller { + softreset: softreset-controller@0 { compatible = "st,stih407-softreset"; + reg = <0 0>; #reset-cells = <1>; }; - picophyreset: picophyreset-controller { + picophyreset: picophyreset-controller@0 { compatible = "st,stih407-picophyreset"; + reg = <0 0>; #reset-cells = <1>; }; @@ -167,6 +175,13 @@ syscfg_core: core-syscfg@92b0000 { compatible = "st,stih407-core-syscfg", "syscon"; reg = <0x92b0000 0x1000>; + + sti_sasg_codec: sti-sasg-codec { + compatible = "st,stih407-sas-codec"; + #sound-dai-cells = <1>; + status = "disabled"; + st,syscfg = <&syscfg_core>; + }; }; syscfg_lpm: lpm-syscfg@94b5100 { @@ -174,8 +189,9 @@ reg = <0x94b5100 0x1000>; }; - irq-syscfg { + irq-syscfg@0 { compatible = "st,stih407-irq-syscfg"; + reg = <0 0>; st,syscfg = <&syscfg_core>; st,irq-device = <ST_IRQ_SYSCFG_PMU_0>, <ST_IRQ_SYSCFG_PMU_1>; @@ -187,22 +203,21 @@ vtg_main: sti-vtg-main@8d02800 { compatible = "st,vtg"; reg = <0x8d02800 0x200>; - interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; }; vtg_aux: sti-vtg-aux@8d00200 { compatible = "st,vtg"; reg = <0x8d00200 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; }; serial@9830000 { compatible = "st,asc"; reg = <0x9830000 0x2c>; - interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_serial0>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + /* Pinctrl moved out to a per-board configuration */ status = "disabled"; }; @@ -210,7 +225,7 @@ serial@9831000 { compatible = "st,asc"; reg = <0x9831000 0x2c>; - interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_serial1>; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; @@ -221,7 +236,7 @@ serial@9832000 { compatible = "st,asc"; reg = <0x9832000 0x2c>; - interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_serial2>; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; @@ -233,7 +248,7 @@ sbc_serial0: serial@9530000 { compatible = "st,asc"; reg = <0x9530000 0x2c>; - interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial0>; clocks = <&clk_sysin>; @@ -244,7 +259,7 @@ serial@9531000 { compatible = "st,asc"; reg = <0x9531000 0x2c>; - interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial1>; clocks = <&clk_sysin>; @@ -374,8 +389,9 @@ status = "disabled"; }; - usb2_picophy0: phy1 { + usb2_picophy0: phy1@0 { compatible = "st,stih407-usb2-phy"; + reg = <0 0>; #phy-cells = <0>; st,syscfg = <&syscfg_core 0x100 0xf4>; resets = <&softreset STIH407_PICOPHY_SOFTRESET>, @@ -383,12 +399,13 @@ reset-names = "global", "port"; }; - miphy28lp_phy: miphy28lp@9b22000 { + miphy28lp_phy: miphy28lp@0 { compatible = "st,miphy28lp-phy"; st,syscfg = <&syscfg_core>; #address-cells = <1>; #size-cells = <1>; ranges; + reg = <0 0>; phy_port0: port@9b22000 { reg = <0x9b22000 0xff>, @@ -458,6 +475,8 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -470,6 +489,8 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -482,6 +503,8 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi3_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -494,6 +517,8 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi4_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -507,6 +532,8 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi10_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -519,6 +546,8 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi11_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -531,16 +560,18 @@ clock-names = "ssc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi12_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; - mmc0: sdhci@09060000 { + mmc0: sdhci@9060000 { compatible = "st,sdhci-stih407", "st,sdhci"; status = "disabled"; reg = <0x09060000 0x7ff>, <0x9061008 0x20>; reg-names = "mmc", "top-mmc-delay"; - interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "mmcirq"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc0>; @@ -550,12 +581,12 @@ bus-width = <8>; }; - mmc1: sdhci@09080000 { + mmc1: sdhci@9080000 { compatible = "st,sdhci-stih407", "st,sdhci"; status = "disabled"; reg = <0x09080000 0x7ff>; reg-names = "mmc"; - interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "mmcirq"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sd1>; @@ -563,7 +594,6 @@ clocks = <&clk_s_c0_flexgen CLK_MMC_1>, <&clk_s_c0_flexgen CLK_RX_ICN_HVA>; resets = <&softreset STIH407_MMC1_SOFTRESET>; - reset-names = "softreset"; bus-width = <4>; }; @@ -590,7 +620,7 @@ compatible = "st,ahci"; reg = <0x9b20000 0x1000>; - interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hostc"; phys = <&phy_port0 PHY_TYPE_SATA>; @@ -613,7 +643,7 @@ compatible = "st,ahci"; reg = <0x9b28000 0x1000>; - interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hostc"; phys = <&phy_port1 PHY_TYPE_SATA>; @@ -654,11 +684,12 @@ dwc3: dwc3@9900000 { compatible = "snps,dwc3"; reg = <0x09900000 0x100000>; - interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>; - dr_mode = "peripheral"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; phy-names = "usb2-phy", "usb3-phy"; phys = <&usb2_picophy0>, <&phy_port2 PHY_TYPE_USB3>; + snps,dis_u3_susphy_quirk; }; }; @@ -667,7 +698,7 @@ compatible = "st,sti-pwm"; #pwm-cells = <2>; reg = <0x9810000 0x68>; - interrupts = <GIC_SPI 128 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm0_chan0_default>; clock-names = "pwm"; @@ -682,6 +713,7 @@ compatible = "st,sti-pwm"; #pwm-cells = <2>; reg = <0x9510000 0x68>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1_chan0_default &pinctrl_pwm1_chan1_default @@ -694,14 +726,14 @@ status = "disabled"; }; - rng10: rng@08a89000 { + rng10: rng@8a89000 { compatible = "st,rng"; reg = <0x08a89000 0x1000>; clocks = <&clk_sysin>; status = "okay"; }; - rng11: rng@08a8a000 { + rng11: rng@8a8a000 { compatible = "st,rng"; reg = <0x08a8a000 0x1000>; clocks = <&clk_sysin>; @@ -720,8 +752,8 @@ resets = <&softreset STIH407_ETH1_SOFTRESET>; reset-names = "stmmaceth"; - interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>, - <GIC_SPI 99 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq", "eth_wake_irq"; /* DMA Bus Mode */ @@ -735,26 +767,14 @@ <&clk_s_c0_flexgen CLK_ETH_PHY>; }; - cec: sti-cec@094a087c { - compatible = "st,stih-cec"; - reg = <0x94a087c 0x64>; - clocks = <&clk_sysin>; - clock-names = "cec-clk"; - interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>; - interrupt-names = "cec-irq"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_cec0_default>; - resets = <&softreset STIH407_LPM_SOFTRESET>; - }; - - rng10: rng@08a89000 { + rng10: rng@8a89000 { compatible = "st,rng"; reg = <0x08a89000 0x1000>; clocks = <&clk_sysin>; status = "okay"; }; - rng11: rng@08a8a000 { + rng11: rng@8a8a000 { compatible = "st,rng"; reg = <0x08a8a000 0x1000>; clocks = <&clk_sysin>; @@ -764,7 +784,7 @@ mailbox0: mailbox@8f00000 { compatible = "st,stih407-mailbox"; reg = <0x8f00000 0x1000>; - interrupts = <GIC_SPI 1 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; #mbox-cells = <2>; mbox-name = "a9"; status = "okay"; @@ -794,9 +814,24 @@ status = "okay"; }; - st231_delta: st231-delta@44000000 { + st231_gp0: st231-gp0@0 { compatible = "st,st231-rproc"; - memory-region = <&dmu_reserved>; + reg = <0 0>; + memory-region = <&gp0_reserved>; + resets = <&softreset STIH407_ST231_GP0_SOFTRESET>; + reset-names = "sw_reset"; + clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>; + clock-frequency = <600000000>; + st,syscfg = <&syscfg_core 0x22c>; + #mbox-cells = <1>; + mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx"; + mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>; + }; + + st231_delta: st231-delta@0 { + compatible = "st,st231-rproc"; + reg = <0 0>; + memory-region = <&delta_reserved>; resets = <&softreset STIH407_ST231_DMU_SOFTRESET>; reset-names = "sw_reset"; clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>; @@ -819,7 +854,7 @@ <&clk_s_c0_flexgen CLK_EXT2F_A9>, <&clk_s_c0_flexgen CLK_EXT2F_A9>, <&clk_s_c0_flexgen CLK_EXT2F_A9>; - interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; dma-channels = <16>; #dma-cells = <3>; }; @@ -837,9 +872,11 @@ <&clk_s_c0_flexgen CLK_TX_ICN_DMU>, <&clk_s_c0_flexgen CLK_EXT2F_A9>; - interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; dma-channels = <16>; #dma-cells = <3>; + + status = "disabled"; }; /* fdma free running */ @@ -850,20 +887,15 @@ <0x8e77000 0x1000>, <0x8e78000 0x8000>; reg-names = "slimcore", "dmem", "peripherals", "imem"; - interrupts = <GIC_SPI 9 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; dma-channels = <16>; #dma-cells = <3>; clocks = <&clk_s_c0_flexgen CLK_FDMA>, <&clk_s_c0_flexgen CLK_EXT2F_A9>, <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, <&clk_s_c0_flexgen CLK_EXT2F_A9>; - }; - sti_sasg_codec: sti-sasg-codec { - compatible = "st,stih407-sas-codec"; - #sound-dai-cells = <1>; status = "disabled"; - st,syscfg = <&syscfg_core>; }; sti_uni_player0: sti-uni-player@8d80000 { @@ -875,7 +907,7 @@ assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>; assigned-clock-rates = <50000000>; reg = <0x8d80000 0x158>; - interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; dmas = <&fdma0 2 0 1>; dma-names = "tx"; @@ -891,7 +923,7 @@ assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>; assigned-clock-rates = <50000000>; reg = <0x8d81000 0x158>; - interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; dmas = <&fdma0 3 0 1>; dma-names = "tx"; @@ -907,7 +939,7 @@ assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>; assigned-clock-rates = <50000000>; reg = <0x8d82000 0x158>; - interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; dmas = <&fdma0 4 0 1>; dma-names = "tx"; @@ -923,7 +955,7 @@ assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>; assigned-clock-rates = <50000000>; reg = <0x8d85000 0x158>; - interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; dmas = <&fdma0 7 0 1>; dma-names = "tx"; @@ -935,7 +967,7 @@ #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; reg = <0x8d83000 0x158>; - interrupts = <GIC_SPI 87 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; dmas = <&fdma0 5 0 1>; dma-names = "rx"; @@ -947,32 +979,22 @@ #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; reg = <0x8d84000 0x158>; - interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; dmas = <&fdma0 6 0 1>; dma-names = "rx"; status = "disabled"; }; - rc: rc@09518000 { - compatible = "st,comms-irb"; - reg = <0x09518000 0x234>; - interrupts = <GIC_SPI 132 IRQ_TYPE_NONE>; - rx-mode = "infrared"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ir - &pinctrl_uhf - &pinctrl_tx - &pinctrl_tx_od>; - clocks = <&clk_sysin>; - resets = <&softreset STIH407_IRB_SOFTRESET>; - - status = "disabled"; - }; - - socinfo { - compatible = "st,stih407-socinfo"; - st,syscfg = <&syscfg_core>; + delta0@0 { + compatible = "st,st-delta"; + reg = <0 0>; + clock-names = "delta", + "delta-st231", + "delta-flash-promip"; + clocks = <&clk_s_c0_flexgen CLK_VID_DMU>, + <&clk_s_c0_flexgen CLK_ST231_DMU>, + <&clk_s_c0_flexgen CLK_FLASH_PROMIP>; }; }; }; diff --git a/arch/arm/dts/stih407-pinctrl.dtsi b/arch/arm/dts/stih407-pinctrl.dtsi index f27ae21f676..2cf335714ca 100644 --- a/arch/arm/dts/stih407-pinctrl.dtsi +++ b/arch/arm/dts/stih407-pinctrl.dtsi @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics Limited. * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include "st-pincfg.h" #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -45,18 +42,18 @@ }; soc { - pin-controller-sbc { + pin-controller-sbc@961f080 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stih407-sbc-pinctrl"; st,syscfg = <&syscfg_sbc>; reg = <0x0961f080 0x4>; reg-names = "irqmux"; - interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "irqmux"; ranges = <0 0x09610000 0x6000>; - pio0: gpio@09610000 { + pio0: gpio@9610000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -64,7 +61,7 @@ reg = <0x0 0x100>; st,bank-name = "PIO0"; }; - pio1: gpio@09611000 { + pio1: gpio@9611000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -72,7 +69,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO1"; }; - pio2: gpio@09612000 { + pio2: gpio@9612000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -80,7 +77,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO2"; }; - pio3: gpio@09613000 { + pio3: gpio@9613000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -88,7 +85,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO3"; }; - pio4: gpio@09614000 { + pio4: gpio@9614000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -97,7 +94,7 @@ st,bank-name = "PIO4"; }; - pio5: gpio@09615000 { + pio5: gpio@9615000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -369,18 +366,18 @@ }; }; - pin-controller-front0 { + pin-controller-front0@920f080 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stih407-front-pinctrl"; st,syscfg = <&syscfg_front>; reg = <0x0920f080 0x4>; reg-names = "irqmux"; - interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "irqmux"; ranges = <0 0x09200000 0x10000>; - pio10: pio@09200000 { + pio10: pio@9200000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -388,7 +385,7 @@ reg = <0x0 0x100>; st,bank-name = "PIO10"; }; - pio11: pio@09201000 { + pio11: pio@9201000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -396,7 +393,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO11"; }; - pio12: pio@09202000 { + pio12: pio@9202000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -404,7 +401,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO12"; }; - pio13: pio@09203000 { + pio13: pio@9203000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -412,7 +409,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO13"; }; - pio14: pio@09204000 { + pio14: pio@9204000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -420,7 +417,7 @@ reg = <0x4000 0x100>; st,bank-name = "PIO14"; }; - pio15: pio@09205000 { + pio15: pio@9205000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -428,7 +425,7 @@ reg = <0x5000 0x100>; st,bank-name = "PIO15"; }; - pio16: pio@09206000 { + pio16: pio@9206000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -436,7 +433,7 @@ reg = <0x6000 0x100>; st,bank-name = "PIO16"; }; - pio17: pio@09207000 { + pio17: pio@9207000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -444,7 +441,7 @@ reg = <0x7000 0x100>; st,bank-name = "PIO17"; }; - pio18: pio@09208000 { + pio18: pio@9208000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -452,7 +449,7 @@ reg = <0x8000 0x100>; st,bank-name = "PIO18"; }; - pio19: pio@09209000 { + pio19: pio@9209000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -465,19 +462,16 @@ serial0 { pinctrl_serial0: serial0-0 { st,pins { - tx = <&pio17 0 ALT1 OUT>; - rx = <&pio17 1 ALT1 IN>; + tx = <&pio17 0 ALT1 OUT>; + rx = <&pio17 1 ALT1 IN>; }; }; - pinctrl_serial0_rts: serial0_rts { - st,pins { - rts = <&pio17 3 ALT1 OUT>; - }; - }; - - pinctrl_serial0_cts: serial0_cts { + pinctrl_serial0_hw_flowctrl: serial0-0_hw_flowctrl { st,pins { + tx = <&pio17 0 ALT1 OUT>; + rx = <&pio17 1 ALT1 IN>; cts = <&pio17 2 ALT1 IN>; + rts = <&pio17 3 ALT1 OUT>; }; }; }; @@ -932,18 +926,18 @@ }; }; - pin-controller-front1 { + pin-controller-front1@921f080 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stih407-front-pinctrl"; st,syscfg = <&syscfg_front>; reg = <0x0921f080 0x4>; reg-names = "irqmux"; - interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "irqmux"; ranges = <0 0x09210000 0x10000>; - pio20: pio@09210000 { + pio20: pio@9210000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -965,18 +959,18 @@ }; }; - pin-controller-rear { + pin-controller-rear@922f080 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stih407-rear-pinctrl"; st,syscfg = <&syscfg_rear>; reg = <0x0922f080 0x4>; reg-names = "irqmux"; - interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "irqmux"; ranges = <0 0x09220000 0x6000>; - pio30: gpio@09220000 { + pio30: gpio@9220000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -984,7 +978,7 @@ reg = <0x0 0x100>; st,bank-name = "PIO30"; }; - pio31: gpio@09221000 { + pio31: gpio@9221000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -992,7 +986,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO31"; }; - pio32: gpio@09222000 { + pio32: gpio@9222000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1000,7 +994,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO32"; }; - pio33: gpio@09223000 { + pio33: gpio@9223000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1008,7 +1002,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO33"; }; - pio34: gpio@09224000 { + pio34: gpio@9224000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1016,7 +1010,7 @@ reg = <0x4000 0x100>; st,bank-name = "PIO34"; }; - pio35: gpio@09225000 { + pio35: gpio@9225000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1026,41 +1020,6 @@ st,retime-pin-mask = <0x7f>; }; - dvo { - pinctrl_dvo: dvo { - st,pins { - hs = <&pio30 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - vs = <&pio30 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - de = <&pio30 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - ck = <&pio30 3 ALT2 (OE | CLKNOTDATA) 0>; - d0 = <&pio30 4 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d1 = <&pio30 5 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d2 = <&pio30 6 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d3 = <&pio30 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d4 = <&pio31 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d5 = <&pio31 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d6 = <&pio31 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d7 = <&pio31 3 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d8 = <&pio31 4 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d9 = <&pio31 5 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d10 = <&pio31 6 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d11 = <&pio31 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d12 = <&pio32 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d13 = <&pio32 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d14 = <&pio32 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d15 = <&pio32 3 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d16 = <&pio32 4 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d17 = <&pio32 5 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d18 = <&pio32 6 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d19 = <&pio32 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d20 = <&pio33 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d21 = <&pio33 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d22 = <&pio33 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - d23 = <&pio33 3 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - }; - }; - }; - i2c4 { pinctrl_i2c4_default: i2c4-default { st,pins { @@ -1195,18 +1154,18 @@ }; }; - pin-controller-flash { + pin-controller-flash@923f080 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stih407-flash-pinctrl"; st,syscfg = <&syscfg_flash>; reg = <0x0923f080 0x4>; reg-names = "irqmux"; - interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>; - interrupts-names = "irqmux"; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "irqmux"; ranges = <0 0x09230000 0x3000>; - pio40: gpio@09230000 { + pio40: gpio@9230000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1214,7 +1173,7 @@ reg = <0 0x100>; st,bank-name = "PIO40"; }; - pio41: gpio@09231000 { + pio41: gpio@9231000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1222,7 +1181,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO41"; }; - pio42: gpio@09232000 { + pio42: gpio@9232000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/arch/arm/dts/stih410-b2260-u-boot.dtsi b/arch/arm/dts/stih410-b2260-u-boot.dtsi index 83916319fc1..897c42146aa 100644 --- a/arch/arm/dts/stih410-b2260-u-boot.dtsi +++ b/arch/arm/dts/stih410-b2260-u-boot.dtsi @@ -9,8 +9,25 @@ soc { st_dwc3: dwc3@8f94000 { dwc3: dwc3@9900000 { + dr_mode = "peripheral"; phys = <&usb2_picophy0>; }; }; + + ohci0: usb@9a03c00 { + compatible = "generic-ohci"; + }; + + ehci0: usb@9a03e00 { + compatible = "generic-ehci"; + }; + + ohci1: usb@9a83c00 { + compatible = "generic-ohci"; + }; + + ehci1: usb@9a83e00 { + compatible = "generic-ehci"; + }; }; }; diff --git a/arch/arm/dts/stih410-b2260.dts b/arch/arm/dts/stih410-b2260.dts index 54250e25182..4fbd8e9eb5b 100644 --- a/arch/arm/dts/stih410-b2260.dts +++ b/arch/arm/dts/stih410-b2260.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2016 STMicroelectronics (R&D) Limited. * Author: Patrice Chotard <patrice.chotard@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; #include "stih410.dtsi" @@ -15,68 +12,79 @@ compatible = "st,stih410-b2260", "st,stih410"; chosen { - bootargs = "console=ttyAS1,115200"; - linux,stdout-path = &uart1; + bootargs = "clk_ignore_unused"; stdout-path = &uart1; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x40000000>; }; aliases { - ttyAS1 = &uart1; + serial1 = &uart1; ethernet0 = ðernet0; }; - soc { - - leds { - compatible = "gpio-leds"; - user_green_1 { - label = "User_green_1"; - gpios = <&pio1 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; + leds { + compatible = "gpio-leds"; + user_green_1 { + label = "User_green_1"; + gpios = <&pio1 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; - user_green_2 { - label = "User_green_2"; - gpios = <&pio4 1 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; + user_green_2 { + label = "User_green_2"; + gpios = <&pio4 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; - user_green_3 { - label = "User_green_3"; - gpios = <&pio2 1 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; + user_green_3 { + label = "User_green_3"; + gpios = <&pio2 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; - user_green_4 { - label = "User_green_4"; - gpios = <&pio2 5 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; + user_green_4 { + label = "User_green_4"; + gpios = <&pio2 5 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; - wifi_yellow { - label = "Wifi_yellow"; - gpios = <&pio4 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "wifi-activity"; - default-state = "off"; + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "STI-B2260"; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + simple-audio-card,dai-link@0 { + reg = <0>; + /* DAC */ + format = "i2s"; + mclk-fs = <128>; + cpu { + sound-dai = <&sti_uni_player0>; }; - bt_blue { - label = "Bluetooth_blue"; - gpios = <&pio3 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "hci0-power"; - default-state = "off"; + codec { + sound-dai = <&sti_hdmi>; }; }; + }; + soc { /* Low speed expansion connector */ uart0: serial@9830000 { label = "LS-UART0"; + pinctrl-names = "default", "no-hw-flowctrl"; + pinctrl-0 = <&pinctrl_serial0_hw_flowctrl>; + pinctrl-1 = <&pinctrl_serial0>; + rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; }; @@ -119,14 +127,14 @@ status = "okay"; }; - mmc0: sdhci@09060000 { + mmc0: sdhci@9060000 { pinctrl-0 = <&pinctrl_sd0>; bus-width = <4>; status = "okay"; }; /* high speed expansion connector */ - mmc1: sdhci@09080000 { + mmc1: sdhci@9080000 { status = "okay"; }; @@ -138,11 +146,11 @@ status = "okay"; }; - usb2_picophy1: phy2 { + usb2_picophy1: phy2@0 { status = "okay"; }; - usb2_picophy2: phy3 { + usb2_picophy2: phy3@0 { status = "okay"; }; @@ -183,17 +191,17 @@ sti_uni_player0: sti-uni-player@8d80000 { status = "okay"; }; - /* SSC11 to HDMI */ hdmiddc: i2c@9541000 { /* HDMI V1.3a supports Standard mode only */ clock-frequency = <100000>; st,i2c-min-scl-pulse-width-us = <0>; - st,i2c-min-sda-pulse-width-us = <1>; + st,i2c-min-sda-pulse-width-us = <5>; status = "okay"; }; - miphy28lp_phy: miphy28lp@9b22000 { + miphy28lp_phy: miphy28lp@0 { + phy_port1: port@9b2a000 { st,osc-force-ext; }; @@ -202,25 +210,5 @@ sata1: sata@9b28000 { status = "okay"; }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "STI-B2260"; - status = "okay"; - - simple-audio-card,dai-link@0 { - /* DAC */ - format = "i2s"; - mclk-fs = <128>; - cpu { - sound-dai = <&sti_uni_player0>; - }; - - codec { - sound-dai = <&sti_hdmi>; - }; - }; - }; - }; }; diff --git a/arch/arm/dts/stih410-clock.dtsi b/arch/arm/dts/stih410-clock.dtsi index 8598effd6c0..81a8c25d7ba 100644 --- a/arch/arm/dts/stih410-clock.dtsi +++ b/arch/arm/dts/stih410-clock.dtsi @@ -1,12 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics R&D Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/clock/stih410-clks.h> / { + /* + * Fixed 30MHz oscillator inputs to SoC + */ + clk_sysin: clk-sysin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <30000000>; + clock-output-names = "CLK_SYSIN"; + }; + + clk_tmdsout_hdmi: clk-tmdsout-hdmi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; @@ -15,27 +28,6 @@ compatible = "st,stih410-clk", "simple-bus"; /* - * Fixed 30MHz oscillator inputs to SoC - */ - clk_sysin: clk-sysin { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <30000000>; - clock-output-names = "CLK_SYSIN"; - }; - - /* - * ARM Peripheral clock for timers - */ - arm_periph_clk: clk-m-a9-periphs { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&clk_m_a9>; - clock-div = <2>; - clock-mult = <1>; - }; - - /* * A9 PLL. */ clockgen-a9@92b0000 { @@ -64,35 +56,19 @@ <&clockgen_a9_pll 0>, <&clk_s_c0_flexgen 13>, <&clk_m_a9_ext2f_div2>; + /* + * ARM Peripheral clock for timers + */ + arm_periph_clk: clk-m-a9-periphs { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a9>; + clock-div = <2>; + clock-mult = <1>; + }; }; - /* - * ARM Peripheral clock for timers - */ - clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - - clocks = <&clk_s_c0_flexgen 13>; - - clock-output-names = "clk-m-a9-ext2f-div2"; - - clock-div = <2>; - clock-mult = <1>; - }; - - /* - * Bootloader initialized system infrastructure clock for - * serial devices. - */ - clk_ext2f_a9: clockgen-c0@13 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <200000000>; - clock-output-names = "clk-s-icn-reg-0"; - }; - - clockgen-a@090ff000 { + clockgen-a@90ff000 { compatible = "st,clkgen-c32"; reg = <0x90ff000 0x1000>; @@ -134,7 +110,7 @@ clock-critical = <0>; /* clk-s-c0-fs0-ch0 */ }; - clk_s_c0: clockgen-c@09103000 { + clk_s_c0: clockgen-c@9103000 { compatible = "st,clkgen-c32"; reg = <0x9103000 0x1000>; @@ -208,11 +184,27 @@ "clk-clust-hades", "clk-hwpe-hades", "clk-fc-hades"; - clock-critical = <CLK_ICN_CPU>, + clock-critical = <CLK_PROC_STFE>, + <CLK_ICN_CPU>, <CLK_TX_ICN_DMU>, <CLK_EXT2F_A9>, <CLK_ICN_LMI>, <CLK_ICN_SBC>; + + /* + * ARM Peripheral clock for timers + */ + clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + + clocks = <&clk_s_c0_flexgen 13>; + + clock-output-names = "clk-m-a9-ext2f-div2"; + + clock-div = <2>; + clock-mult = <1>; + }; }; }; @@ -229,7 +221,7 @@ "clk-s-d0-fs0-ch3"; }; - clockgen-d0@09104000 { + clockgen-d0@9104000 { compatible = "st,clkgen-c32"; reg = <0x9104000 0x1000>; @@ -265,13 +257,7 @@ "clk-s-d2-fs0-ch3"; }; - clk_tmdsout_hdmi: clk-tmdsout-hdmi { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - clockgen-d2@x9106000 { + clockgen-d2@9106000 { compatible = "st,clkgen-c32"; reg = <0x9106000 0x1000>; diff --git a/arch/arm/dts/stih410-pinctrl.dtsi b/arch/arm/dts/stih410-pinctrl.dtsi index b3e9dfc81c0..e6eadd12441 100644 --- a/arch/arm/dts/stih410-pinctrl.dtsi +++ b/arch/arm/dts/stih410-pinctrl.dtsi @@ -1,16 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics Limited. * Author: Peter Griffin <peter.griffin@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include "st-pincfg.h" / { soc { - pin-controller-rear { + pin-controller-rear@922f080 { usb0 { pinctrl_usb0: usb2-0 { diff --git a/arch/arm/dts/stih410.dtsi b/arch/arm/dts/stih410.dtsi index b59b1109893..6d847019c55 100644 --- a/arch/arm/dts/stih410.dtsi +++ b/arch/arm/dts/stih410.dtsi @@ -1,67 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics Limited. * Author: Peter Griffin <peter.griffin@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include "stih410-clock.dtsi" #include "stih407-family.dtsi" #include "stih410-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> / { aliases { bdisp0 = &bdisp0; }; - cpus { - cpu@0 { - st,syscfg = <&syscfg_core 0x8e0>; - st,syscfg-eng = <&syscfg_opp 0x4 0x0>; - clocks = <&clk_m_a9>; - operating-points-v2 = <&cpu0_opp_table>; - }; - cpu@1 { - clocks = <&clk_m_a9>; - operating-points-v2 = <&cpu0_opp_table>; - }; - }; - - cpu0_opp_table: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp@1500000000 { - opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>; - opp-hz = /bits/ 64 <1500000000>; - clock-latency-ns = <10000000>; - opp-suspend; - }; - opp@1200000000 { - opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>; - opp-hz = /bits/ 64 <1200000000>; - clock-latency-ns = <10000000>; - }; - opp@800000000 { - opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>; - opp-hz = /bits/ 64 <800000000>; - clock-latency-ns = <10000000>; - }; - opp@400000000 { - opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>; - opp-hz = /bits/ 64 <400000000>; - clock-latency-ns = <10000000>; - }; - }; - soc { - syscfg_opp: @08a6583c { - compatible = "syscon"; - reg = <0x08a6583c 0x8>; - }; - - usb2_picophy1: phy2 { + usb2_picophy1: phy2@0 { compatible = "st,stih407-usb2-phy"; + reg = <0 0>; #phy-cells = <0>; st,syscfg = <&syscfg_core 0xf8 0xf4>; resets = <&softreset STIH407_PICOPHY_SOFTRESET>, @@ -71,8 +25,9 @@ status = "disabled"; }; - usb2_picophy2: phy3 { + usb2_picophy2: phy3@0 { compatible = "st,stih407-usb2-phy"; + reg = <0 0>; #phy-cells = <0>; st,syscfg = <&syscfg_core 0xfc 0xf4>; resets = <&softreset STIH407_PICOPHY_SOFTRESET>, @@ -83,15 +38,14 @@ }; ohci0: usb@9a03c00 { - compatible = "generic-ohci"; + compatible = "st,st-ohci-300x"; reg = <0x9a03c00 0x100>; - interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>; resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, <&softreset STIH407_USB2_PORT0_SOFTRESET>; reset-names = "power", "softreset"; - phys = <&usb2_picophy1>; phy-names = "usb"; @@ -99,9 +53,9 @@ }; ehci0: usb@9a03e00 { - compatible = "generic-ehci"; + compatible = "st,st-ehci-300x"; reg = <0x9a03e00 0x100>; - interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, @@ -116,15 +70,14 @@ }; ohci1: usb@9a83c00 { - compatible = "generic-ohci"; + compatible = "st,st-ohci-300x"; reg = <0x9a83c00 0x100>; - interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>; resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, <&softreset STIH407_USB2_PORT1_SOFTRESET>; reset-names = "power", "softreset"; - phys = <&usb2_picophy2>; phy-names = "usb"; @@ -132,9 +85,9 @@ }; ehci1: usb@9a83e00 { - compatible = "generic-ehci"; + compatible = "st,st-ehci-300x"; reg = <0x9a83e00 0x100>; - interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, @@ -142,18 +95,18 @@ resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, <&softreset STIH407_USB2_PORT1_SOFTRESET>; reset-names = "power", "softreset"; - phys = <&usb2_picophy2>; phy-names = "usb"; status = "disabled"; }; - sti-display-subsystem { + sti-display-subsystem@0 { compatible = "st,sti-display-subsystem"; #address-cells = <1>; #size-cells = <1>; + reg = <0 0>; assigned-clocks = <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>, <&clk_s_c0_pll1 0>, @@ -243,10 +196,10 @@ sti_hdmi: sti-hdmi@8d04000 { compatible = "st,stih407-hdmi"; - #sound-dai-cells = <0>; reg = <0x8d04000 0x1000>; reg-names = "hdmi-reg"; - interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>; + #sound-dai-cells = <0>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "irq"; clock-names = "pix", "tmds", @@ -262,7 +215,7 @@ <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>; - hdmi,hpd-gpio = <&pio5 3>; + hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>; reset-names = "hdmi"; resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>; ddc = <&hdmiddc>; @@ -283,24 +236,7 @@ <&clk_s_d2_quadfs 1>; }; - sti-dvo@8d00400 { - compatible = "st,stih407-dvo"; - status = "disabled"; - reg = <0x8d00400 0x200>; - reg-names = "dvo-reg"; - clock-names = "dvo_pix", - "dvo", - "main_parent", - "aux_parent"; - clocks = <&clk_s_d2_flexgen CLK_PIX_DVO>, - <&clk_s_d2_flexgen CLK_DVO>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_dvo>; - }; - - sti-hqvdp@9c000000 { + sti-hqvdp@9c00000 { compatible = "st,stih407-hqvdp"; reg = <0x9C00000 0x100000>; clock-names = "hqvdp", "pix_main"; @@ -315,7 +251,7 @@ bdisp0:bdisp@9f10000 { compatible = "st,stih407-bdisp"; reg = <0x9f10000 0x1000>; - interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clock-names = "bdisp"; clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>; }; @@ -324,8 +260,8 @@ compatible = "st,st-hva"; reg = <0x8c85000 0x400>, <0x6000000 0x40000>; reg-names = "hva_registers", "hva_esram"; - interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>, - <GIC_SPI 59 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_hva"; clocks = <&clk_s_c0_flexgen CLK_HVA>; }; @@ -338,66 +274,7 @@ interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>; }; - g1@8c80000 { - compatible = "st,g1"; - reg = <0x8c80000 0x194>; - interrupts = <GIC_SPI 57 IRQ_TYPE_NONE>; - }; - - temp0{ - compatible = "st,stih407-thermal"; - reg = <0x91a0000 0x28>; - clock-names = "thermal"; - clocks = <&clk_sysin>; - interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>; - }; - - delta0 { - compatible = "st,delta"; - clock-names = "delta", "delta-st231", "delta-flash-promip"; - clocks = <&clk_s_c0_flexgen CLK_VID_DMU>, - <&clk_s_c0_flexgen CLK_ST231_DMU>, - <&clk_s_c0_flexgen CLK_FLASH_PROMIP>; - }; - - h264pp0: h264pp@8c00000 { - compatible = "st,h264pp"; - reg = <0x8c00000 0x20000>; - interrupts = <GIC_SPI 53 IRQ_TYPE_NONE>; - clock-names = "clk_h264pp_0"; - clocks = <&clk_s_c0_flexgen CLK_PP_DMU>; - }; - - mali: mali@09f00000 { - compatible = "arm,mali-400"; - reg = <0x09f00000 0x10000>; - interrupts = <GIC_SPI 49 IRQ_TYPE_NONE>, - <GIC_SPI 50 IRQ_TYPE_NONE>, - <GIC_SPI 41 IRQ_TYPE_NONE>, - <GIC_SPI 45 IRQ_TYPE_NONE>, - <GIC_SPI 42 IRQ_TYPE_NONE>, - <GIC_SPI 46 IRQ_TYPE_NONE>, - <GIC_SPI 43 IRQ_TYPE_NONE>, - <GIC_SPI 47 IRQ_TYPE_NONE>, - <GIC_SPI 44 IRQ_TYPE_NONE>, - <GIC_SPI 48 IRQ_TYPE_NONE>; - interrupt-names = "IRQGP", - "IRQGPMMU", - "IRQPP0", - "IRQPPMMU0", - "IRQPP1", - "IRQPPMMU1", - "IRQPP2", - "IRQPPMMU2", - "IRQPP3", - "IRQPPMMU3"; - clock-names = "gpu-clk"; - clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>; - reset-names = "gpu"; - resets = <&softreset STIH407_GPU_SOFTRESET>; - }; - - delta0 { + delta0@0 { compatible = "st,st-delta"; clock-names = "delta", "delta-st231", @@ -407,51 +284,17 @@ <&clk_s_c0_flexgen CLK_FLASH_PROMIP>; }; - h264pp0: h264pp@8c00000 { - compatible = "st,h264pp"; - reg = <0x8c00000 0x20000>; - interrupts = <GIC_SPI 53 IRQ_TYPE_NONE>; - clock-names = "clk_h264pp_0"; - clocks = <&clk_s_c0_flexgen CLK_PP_DMU>; - }; - - mali: mali@09f00000 { - compatible = "arm,mali-400"; - reg = <0x09f00000 0x10000>; - interrupts = <GIC_SPI 49 IRQ_TYPE_NONE>, - <GIC_SPI 50 IRQ_TYPE_NONE>, - <GIC_SPI 41 IRQ_TYPE_NONE>, - <GIC_SPI 45 IRQ_TYPE_NONE>, - <GIC_SPI 42 IRQ_TYPE_NONE>, - <GIC_SPI 46 IRQ_TYPE_NONE>, - <GIC_SPI 43 IRQ_TYPE_NONE>, - <GIC_SPI 47 IRQ_TYPE_NONE>, - <GIC_SPI 44 IRQ_TYPE_NONE>, - <GIC_SPI 48 IRQ_TYPE_NONE>; - interrupt-names = "IRQGP", - "IRQGPMMU", - "IRQPP0", - "IRQPPMMU0", - "IRQPP1", - "IRQPPMMU1", - "IRQPP2", - "IRQPPMMU2", - "IRQPP3", - "IRQPPMMU3"; - clock-names = "gpu-clk"; - clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>; - reset-names = "gpu"; - resets = <&softreset STIH407_GPU_SOFTRESET>; - }; - - hva@8c85000{ - compatible = "st,st-hva"; - reg = <0x8c85000 0x400>, <0x6000000 0x40000>; - reg-names = "hva_registers", "hva_esram"; - interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>, - <GIC_SPI 59 IRQ_TYPE_NONE>; - clock-names = "clk_hva"; - clocks = <&clk_s_c0_flexgen CLK_HVA>; + sti-cec@94a087c { + compatible = "st,stih-cec"; + reg = <0x94a087c 0x64>; + clocks = <&clk_sysin>; + clock-names = "cec-clk"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cec-irq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cec0_default>; + resets = <&softreset STIH407_LPM_SOFTRESET>; + hdmi-phandle = <&sti_hdmi>; }; }; }; diff --git a/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi index dc30360b0a4..11e8f2bef69 100644 --- a/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi @@ -16,7 +16,7 @@ * address mapping : RBC * Tc > + 85C : N */ -#define DDR_MEM_NAME "DDR3-1066/888 bin G 1x4Gb 533MHz v1.44" +#define DDR_MEM_NAME "DDR3-1066/888 bin G 1x4Gb 533MHz v1.45" #define DDR_MEM_SPEED 533000 #define DDR_MEM_SIZE 0x20000000 @@ -89,7 +89,7 @@ #define DDR_PTR2 0x042DA068 #define DDR_ACIOCR 0x10400812 #define DDR_DXCCR 0x00000C40 -#define DDR_DSGCR 0xF200001F +#define DDR_DSGCR 0xF200011F #define DDR_DCR 0x0000000B #define DDR_DTPR0 0x38D488D0 #define DDR_DTPR1 0x098B00D8 diff --git a/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi index 8158a56f135..4b70b605541 100644 --- a/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi @@ -16,8 +16,7 @@ * address mapping : RBC * Tc > + 85C : N */ - -#define DDR_MEM_NAME "DDR3-1066/888 bin G 2x4Gb 533MHz v1.44" +#define DDR_MEM_NAME "DDR3-1066/888 bin G 2x4Gb 533MHz v1.45" #define DDR_MEM_SPEED 533000 #define DDR_MEM_SIZE 0x40000000 @@ -90,7 +89,7 @@ #define DDR_PTR2 0x042DA068 #define DDR_ACIOCR 0x10400812 #define DDR_DXCCR 0x00000C40 -#define DDR_DSGCR 0xF200001F +#define DDR_DSGCR 0xF200011F #define DDR_DCR 0x0000000B #define DDR_DTPR0 0x38D488D0 #define DDR_DTPR1 0x098B00D8 diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi index 9bae85045a1..4367e8dcf75 100644 --- a/arch/arm/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi @@ -25,8 +25,7 @@ reg = <0x0 0x400>; clocks = <&rcc GPIOA>; st,bank-name = "GPIOA"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; + status = "disabled"; }; gpiob: gpio@50003000 { @@ -37,8 +36,7 @@ reg = <0x1000 0x400>; clocks = <&rcc GPIOB>; st,bank-name = "GPIOB"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; + status = "disabled"; }; gpioc: gpio@50004000 { @@ -49,8 +47,7 @@ reg = <0x2000 0x400>; clocks = <&rcc GPIOC>; st,bank-name = "GPIOC"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; + status = "disabled"; }; gpiod: gpio@50005000 { @@ -61,8 +58,7 @@ reg = <0x3000 0x400>; clocks = <&rcc GPIOD>; st,bank-name = "GPIOD"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; + status = "disabled"; }; gpioe: gpio@50006000 { @@ -73,8 +69,7 @@ reg = <0x4000 0x400>; clocks = <&rcc GPIOE>; st,bank-name = "GPIOE"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; + status = "disabled"; }; gpiof: gpio@50007000 { @@ -85,8 +80,7 @@ reg = <0x5000 0x400>; clocks = <&rcc GPIOF>; st,bank-name = "GPIOF"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 80 16>; + status = "disabled"; }; gpiog: gpio@50008000 { @@ -97,8 +91,7 @@ reg = <0x6000 0x400>; clocks = <&rcc GPIOG>; st,bank-name = "GPIOG"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 96 16>; + status = "disabled"; }; gpioh: gpio@50009000 { @@ -109,8 +102,7 @@ reg = <0x7000 0x400>; clocks = <&rcc GPIOH>; st,bank-name = "GPIOH"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 112 16>; + status = "disabled"; }; gpioi: gpio@5000a000 { @@ -121,8 +113,7 @@ reg = <0x8000 0x400>; clocks = <&rcc GPIOI>; st,bank-name = "GPIOI"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 128 16>; + status = "disabled"; }; gpioj: gpio@5000b000 { @@ -133,8 +124,7 @@ reg = <0x9000 0x400>; clocks = <&rcc GPIOJ>; st,bank-name = "GPIOJ"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 144 16>; + status = "disabled"; }; gpiok: gpio@5000c000 { @@ -145,8 +135,7 @@ reg = <0xa000 0x400>; clocks = <&rcc GPIOK>; st,bank-name = "GPIOK"; - ngpios = <8>; - gpio-ranges = <&pinctrl 0 160 8>; + status = "disabled"; }; adc12_usb_pwr_pins_a: adc12-usb-pwr-pins-0 { @@ -186,6 +175,47 @@ }; }; + dcmi_pins_a: dcmi-0 { + pins { + pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('H', 9, AF13)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */ + <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */ + <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */ + <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */ + <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */ + <STM32_PINMUX('H', 7, AF13)>,/* DCMI_D9 */ + <STM32_PINMUX('I', 3, AF13)>,/* DCMI_D10 */ + <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */ + bias-disable; + }; + }; + + dcmi_sleep_pins_a: dcmi-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('H', 9, ANALOG)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */ + <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */ + <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */ + <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */ + <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */ + <STM32_PINMUX('H', 7, ANALOG)>,/* DCMI_D9 */ + <STM32_PINMUX('I', 3, ANALOG)>,/* DCMI_D10 */ + <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */ + }; + }; + ethernet0_rgmii_pins_a: rgmii-0 { pins1 { pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ @@ -308,6 +338,13 @@ }; }; + i2c1_pins_sleep_b: i2c1-3 { + pins { + pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ + }; + }; + i2c2_pins_a: i2c2-0 { pins { pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */ @@ -325,16 +362,21 @@ }; }; - i2c2_pins_b: i2c2-2 { + i2c2_pins_b1: i2c2-2 { pins { - pinmux = <STM32_PINMUX('Z', 0, AF3)>, /* I2C2_SCL */ - <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ + pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ bias-disable; drive-open-drain; slew-rate = <0>; }; }; + i2c2_pins_sleep_b1: i2c2-3 { + pins { + pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ + }; + }; + i2c5_pins_a: i2c5-0 { pins { pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */ @@ -353,6 +395,25 @@ }; }; + i2s2_pins_a: i2s2-0 { + pins { + pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */ + <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */ + <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + }; + + i2s2_pins_sleep_a: i2s2-1 { + pins { + pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */ + <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */ + <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */ + }; + }; + ltdc_pins_a: ltdc-a-0 { pins { pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */ @@ -547,6 +608,12 @@ }; }; + qspi_clk_sleep_pins_a: qspi-clk-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */ + }; + }; + qspi_bk1_pins_a: qspi-bk1-0 { pins1 { pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */ @@ -565,6 +632,16 @@ }; }; + qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */ + <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */ + }; + }; + qspi_bk2_pins_a: qspi-bk2-0 { pins1 { pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */ @@ -583,6 +660,89 @@ }; }; + qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */ + <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */ + <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */ + <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */ + <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */ + }; + }; + + sai2a_pins_a: sai2a-0 { + pins { + pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */ + <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */ + <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai2a_sleep_pins_a: sai2a-1 { + pins { + pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */ + <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */ + <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */ + }; + }; + + sai2b_pins_a: sai2b-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */ + <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */ + <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_a: sai2b-1 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */ + <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */ + <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */ + <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */ + }; + }; + + sai2b_pins_b: sai2b-2 { + pins { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_b: sai2b-3 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */ + }; + }; + + sai4a_pins_a: sai4a-0 { + pins { + pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai4a_sleep_pins_a: sai4a-1 { + pins { + pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */ + }; + }; + sdmmc1_b4_pins_a: sdmmc1-b4-0 { pins { pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ @@ -752,12 +912,6 @@ bias-disable; }; }; - - usbotg_hs_pins_a: usbotg_hs-0 { - pins { - pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */ - }; - }; }; pinctrl_z: pin-controller-z@54004000 { @@ -779,8 +933,22 @@ clocks = <&rcc GPIOZ>; st,bank-name = "GPIOZ"; st,bank-ioport = <11>; - ngpios = <8>; - gpio-ranges = <&pinctrl_z 0 400 8>; + status = "disabled"; + }; + + i2c2_pins_b2: i2c2-0 { + pins { + pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b2: i2c2-1 { + pins { + pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */ + }; }; i2c4_pins_a: i2c4-0 { diff --git a/arch/arm/dts/stm32mp157-u-boot.dtsi b/arch/arm/dts/stm32mp157-u-boot.dtsi index 8102ce20d0d..0d1d387e540 100644 --- a/arch/arm/dts/stm32mp157-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157-u-boot.dtsi @@ -25,6 +25,11 @@ u-boot,dm-pre-reloc; }; + /* need PSCI for sysreset during board_f */ + psci { + u-boot,dm-pre-proper; + }; + reboot { u-boot,dm-pre-reloc; }; @@ -106,6 +111,15 @@ u-boot,dm-pre-reloc; }; +&iwdg2 { + u-boot,dm-pre-reloc; +}; + +/* pre-reloc probe = reserve video frame buffer in video_reserve() */ +<dc { + u-boot,dm-pre-proper; +}; + &pinctrl { u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/stm32mp157a-avenger96.dts b/arch/arm/dts/stm32mp157a-avenger96.dts index dd0859769bf..5b15a4a915e 100644 --- a/arch/arm/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/dts/stm32mp157a-avenger96.dts @@ -1,8 +1,5 @@ // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) /* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. - * * Copyright (C) Linaro Ltd 2019 - All Rights Reserved * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> */ @@ -10,17 +7,19 @@ /dts-v1/; #include "stm32mp157c.dtsi" -#include "stm32mp157-pinctrl.dtsi" +#include "stm32mp157xac-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/st,stpmic1.h> / { model = "Arrow Electronics STM32MP157A Avenger96 board"; - compatible = "st,stm32mp157a-avenger96", "st,stm32mp157"; + compatible = "arrow,stm32mp157a-avenger96", "st,stm32mp157"; aliases { ethernet0 = ðernet0; + mmc0 = &sdmmc1; serial0 = &uart4; + serial1 = &uart7; }; chosen { @@ -28,6 +27,7 @@ }; memory@c0000000 { + device_type = "memory"; reg = <0xc0000000 0x40000000>; }; @@ -109,7 +109,7 @@ &i2c2 { pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_b>; + pinctrl-0 = <&i2c2_pins_b1 &i2c2_pins_b2>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; @@ -151,10 +151,10 @@ vddcore: buck1 { regulator-name = "vddcore"; - regulator-min-microvolt = <800000>; + regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1350000>; regulator-always-on; - regulator-initial-mode = <2>; + regulator-initial-mode = <0>; regulator-over-current-protection; }; @@ -163,17 +163,17 @@ regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; - regulator-initial-mode = <2>; + regulator-initial-mode = <0>; regulator-over-current-protection; }; vdd: buck3 { regulator-name = "vdd"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; st,mask_reset; - regulator-initial-mode = <8>; + regulator-initial-mode = <0>; regulator-over-current-protection; }; @@ -183,7 +183,7 @@ regulator-max-microvolt = <3300000>; regulator-always-on; regulator-over-current-protection; - regulator-initial-mode = <8>; + regulator-initial-mode = <0>; }; vdda: ldo1 { @@ -204,8 +204,8 @@ vtt_ddr: ldo3 { regulator-name = "vtt_ddr"; - regulator-min-microvolt = <0000000>; - regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; regulator-always-on; regulator-over-current-protection; }; @@ -233,6 +233,7 @@ regulator-max-microvolt = <1800000>; interrupts = <IT_CURLIM_LDO6 0>; interrupt-parent = <&pmic>; + regulator-enable-ramp-delay = <300000>; }; vref_ddr: vref_ddr { @@ -282,7 +283,10 @@ }; &pwr { - pwr-supply = <&vdd>; + pwr-regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; + }; }; &rng1 { @@ -294,8 +298,10 @@ }; &sdmmc1 { - pinctrl-names = "default"; + pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; broken-cd; st,sig-dir; st,neg-edge; @@ -325,12 +331,16 @@ }; &uart4 { + /* On Low speed expansion header */ + label = "LS-UART1"; pinctrl-names = "default"; pinctrl-0 = <&uart4_pins_b>; status = "okay"; }; &uart7 { + /* On Low speed expansion header */ + label = "LS-UART0"; pinctrl-names = "default"; pinctrl-0 = <&uart7_pins_a>; status = "okay"; diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi index 36c852d28b3..dcaab3eef2f 100644 --- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi @@ -17,6 +17,8 @@ u-boot,boot-led = "heartbeat"; u-boot,error-led = "error"; st,adc_usb_pd = <&adc1 18>, <&adc1 19>; + st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; }; led { red { @@ -187,6 +189,8 @@ }; pins2 { u-boot,dm-pre-reloc; + /* pull-up on rx to avoid floating level */ + bias-pull-up; }; }; diff --git a/arch/arm/dts/stm32mp157a-dk1.dts b/arch/arm/dts/stm32mp157a-dk1.dts index adb24649209..c210acc0aa2 100644 --- a/arch/arm/dts/stm32mp157a-dk1.dts +++ b/arch/arm/dts/stm32mp157a-dk1.dts @@ -7,7 +7,7 @@ /dts-v1/; #include "stm32mp157c.dtsi" -#include "stm32mp157-pinctrl.dtsi" +#include "stm32mp157xac-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/st,stpmic1.h> @@ -28,6 +28,17 @@ reg = <0xc0000000 0x20000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpu_reserved: gpu@d4000000 { + reg = <0xd4000000 0x4000000>; + no-map; + }; + }; + led { compatible = "gpio-leds"; blue { @@ -65,6 +76,47 @@ }; }; +&gpu { + contiguous-area = <&gpu_reserved>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_pins_sleep_a>; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + hdmi-transmitter@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + iovcc-supply = <&v3v3_hdmi>; + cvcc12-supply = <&v1v2_hdmi>; + reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpiog>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_a>; + pinctrl-1 = <<dc_pins_sleep_a>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sii9022_in: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + }; + }; +}; &i2c4 { pinctrl-names = "default"; @@ -241,8 +293,31 @@ status = "okay"; }; +<dc { + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&sii9022_in>; + }; + }; +}; + +&m4_rproc { + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + status = "okay"; +}; + &pwr { - pwr-supply = <&vdd>; + pwr-regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; + }; }; &rng1 { diff --git a/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi b/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi index 06ef3a4095f..18ac1e3cb2a 100644 --- a/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi @@ -4,3 +4,9 @@ */ #include "stm32mp157a-dk1-u-boot.dtsi" + +&i2c1 { + hdmi-transmitter@39 { + reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi index 200601edff6..4953a0db555 100644 --- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi @@ -15,31 +15,22 @@ }; config { + u-boot,boot-led = "heartbeat"; + u-boot,error-led = "error"; st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; }; led { - compatible = "gpio-leds"; - red { - label = "stm32mp:red:status"; + label = "error"; gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; default-state = "off"; + status = "okay"; }; - green { - label = "stm32mp:green:user"; - gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - orange { - label = "stm32mp:orange:status"; - gpios = <&gpioh 7 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; + blue { - label = "stm32mp:blue:user"; - gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; }; @@ -206,5 +197,7 @@ }; pins2 { u-boot,dm-pre-reloc; + /* pull-up on rx to avoid floating level */ + bias-pull-up; }; }; diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts index 11981d6dd4f..1d9cc734f12 100644 --- a/arch/arm/dts/stm32mp157c-ed1.dts +++ b/arch/arm/dts/stm32mp157c-ed1.dts @@ -6,7 +6,7 @@ /dts-v1/; #include "stm32mp157c.dtsi" -#include "stm32mp157-pinctrl.dtsi" +#include "stm32mp157xaa-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/st,stpmic1.h> @@ -23,6 +23,17 @@ reg = <0xC0000000 0x40000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpu_reserved: gpu@e8000000 { + reg = <0xe8000000 0x8000000>; + no-map; + }; + }; + aliases { serial0 = &uart4; }; @@ -45,6 +56,11 @@ status = "okay"; }; +&gpu { + contiguous-area = <&gpu_reserved>; + status = "okay"; +}; + &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&i2c4_pins_a>; @@ -201,8 +217,17 @@ status = "okay"; }; +&m4_rproc { + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + status = "okay"; +}; + &pwr { - pwr-supply = <&vdd>; + pwr-regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; + }; }; &rng1 { diff --git a/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi index b656eb120db..ec60486f41e 100644 --- a/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi @@ -17,14 +17,9 @@ }; &flash0 { - compatible = "jedec,spi-nor"; u-boot,dm-spl; }; -&flash1 { - compatible = "jedec,spi-nor"; -}; - &qspi { u-boot,dm-spl; }; diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts index ca2a333d432..23de232831c 100644 --- a/arch/arm/dts/stm32mp157c-ev1.dts +++ b/arch/arm/dts/stm32mp157c-ev1.dts @@ -7,6 +7,7 @@ #include "stm32mp157c-ed1.dts" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "STMicroelectronics STM32MP157C eval daughter on eval mother"; @@ -21,6 +22,51 @@ ethernet0 = ðernet0; }; + clocks { + clk_ext_camera: clk-ext-camera { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + joystick { + compatible = "gpio-keys"; + #size-cells = <0>; + pinctrl-0 = <&joystick_pins>; + pinctrl-names = "default"; + button-0 { + label = "JoySel"; + linux,code = <KEY_ENTER>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; + }; + button-1 { + label = "JoyDown"; + linux,code = <KEY_DOWN>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <1 IRQ_TYPE_EDGE_RISING>; + }; + button-2 { + label = "JoyLeft"; + linux,code = <KEY_LEFT>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + }; + button-3 { + label = "JoyRight"; + linux,code = <KEY_RIGHT>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + }; + button-4 { + label = "JoyUp"; + linux,code = <KEY_UP>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + }; + }; + panel_backlight: panel-backlight { compatible = "gpio-backlight"; gpios = <&gpiod 13 GPIO_ACTIVE_LOW>; @@ -35,6 +81,23 @@ status = "okay"; }; +&dcmi { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcmi_pins_a>; + pinctrl-1 = <&dcmi_sleep_pins_a>; + + port { + dcmi_0: endpoint { + remote-endpoint = <&ov5640_0>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; +}; + &dsi { #address-cells = <1>; #size-cells = <0>; @@ -64,6 +127,7 @@ reg = <0>; reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>; backlight = <&panel_backlight>; + power-supply = <&v3v3>; status = "okay"; port { @@ -116,6 +180,31 @@ i2c-scl-falling-time-ns = <20>; status = "okay"; + ov5640: camera@3c { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&ov5640_pins>; + reg = <0x3c>; + clocks = <&clk_ext_camera>; + clock-names = "xclk"; + DOVDD-supply = <&v2v8>; + powerdown-gpios = <&stmfx_pinctrl 18 GPIO_ACTIVE_HIGH>; + reset-gpios = <&stmfx_pinctrl 19 GPIO_ACTIVE_LOW>; + rotation = <180>; + status = "okay"; + + port { + ov5640_0: endpoint { + remote-endpoint = <&dcmi_0>; + bus-width = <8>; + data-shift = <2>; /* lines 9:2 are used */ + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; + }; + stmfx: stmfx@42 { compatible = "st,stmfx-0300"; reg = <0x42>; @@ -130,7 +219,18 @@ interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&stmfx_pinctrl 0 0 24>; - status = "disabled"; + + joystick_pins: joystick { + pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; + drive-push-pull; + bias-pull-down; + }; + + ov5640_pins: camera { + pins = "agpio2", "agpio3"; /* stmfx pins 18 & 19 */ + drive-push-pull; + output-low; + }; }; }; }; @@ -165,14 +265,16 @@ }; &qspi { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>; reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; #address-cells = <1>; #size-cells = <0>; status = "okay"; flash0: mx66l51235l@0 { + compatible = "jedec,spi-nor"; reg = <0>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; @@ -181,6 +283,7 @@ }; flash1: mx66l51235l@1 { + compatible = "jedec,spi-nor"; reg = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; @@ -245,8 +348,6 @@ }; &usbotg_hs { - pinctrl-names = "default"; - pinctrl-0 = <&usbotg_hs_pins_a>; dr_mode = "peripheral"; phys = <&usbphyc_port1 0>; phy-names = "usb2-phy"; diff --git a/arch/arm/dts/stm32mp157c.dtsi b/arch/arm/dts/stm32mp157c.dtsi index d15fba0c802..a6045dd682c 100644 --- a/arch/arm/dts/stm32mp157c.dtsi +++ b/arch/arm/dts/stm32mp157c.dtsi @@ -372,6 +372,17 @@ status = "disabled"; }; + i2s2: audio-controller@4000b000 { + compatible = "st,stm32h7-i2s"; + #sound-dai-cells = <0>; + reg = <0x4000b000 0x400>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 39 0x400 0x01>, + <&dmamux1 40 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + spi3: spi@4000c000 { #address-cells = <1>; #size-cells = <0>; @@ -386,6 +397,17 @@ status = "disabled"; }; + i2s3: audio-controller@4000c000 { + compatible = "st,stm32h7-i2s"; + #sound-dai-cells = <0>; + reg = <0x4000c000 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 61 0x400 0x01>, + <&dmamux1 62 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + spdifrx: audio-controller@4000d000 { compatible = "st,stm32h7-spdifrx"; #sound-dai-cells = <0>; @@ -614,6 +636,17 @@ status = "disabled"; }; + i2s1: audio-controller@44004000 { + compatible = "st,stm32h7-i2s"; + #sound-dai-cells = <0>; + reg = <0x44004000 0x400>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 37 0x400 0x01>, + <&dmamux1 38 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + spi4: spi@44005000 { #address-cells = <1>; #size-cells = <0>; @@ -715,6 +748,100 @@ status = "disabled"; }; + sai1: sai@4400a000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4400a000 0x400>; + reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc SAI1_R>; + status = "disabled"; + + sai1a: audio-controller@4400a004 { + #sound-dai-cells = <0>; + + compatible = "st,stm32-sai-sub-a"; + reg = <0x4 0x1c>; + clocks = <&rcc SAI1_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 87 0x400 0x01>; + status = "disabled"; + }; + + sai1b: audio-controller@4400a024 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x1c>; + clocks = <&rcc SAI1_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 88 0x400 0x01>; + status = "disabled"; + }; + }; + + sai2: sai@4400b000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4400b000 0x400>; + reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc SAI2_R>; + status = "disabled"; + + sai2a: audio-controller@4400b004 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-a"; + reg = <0x4 0x1c>; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 89 0x400 0x01>; + status = "disabled"; + }; + + sai2b: audio-controller@4400b024 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x1c>; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 90 0x400 0x01>; + status = "disabled"; + }; + }; + + sai3: sai@4400c000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4400c000 0x400>; + reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc SAI3_R>; + status = "disabled"; + + sai3a: audio-controller@4400c004 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-a"; + reg = <0x04 0x1c>; + clocks = <&rcc SAI3_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 113 0x400 0x01>; + status = "disabled"; + }; + + sai3b: audio-controller@4400c024 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x1c>; + clocks = <&rcc SAI3_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 114 0x400 0x01>; + status = "disabled"; + }; + }; + dfsdm: dfsdm@4400d000 { compatible = "st,stm32mp1-dfsdm"; reg = <0x4400d000 0x800>; @@ -945,6 +1072,18 @@ status = "disabled"; }; + dcmi: dcmi@4c006000 { + compatible = "st,stm32-dcmi"; + reg = <0x4c006000 0x400>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc CAMITF_R>; + clocks = <&rcc DCMI>; + clock-names = "mclk"; + dmas = <&dmamux1 75 0x400 0x0d>; + dma-names = "tx"; + status = "disabled"; + }; + rcc: rcc@50000000 { compatible = "st,stm32mp1-rcc", "syscon"; reg = <0x50000000 0x1000>; @@ -1084,6 +1223,37 @@ status = "disabled"; }; + sai4: sai@50027000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x50027000 0x400>; + reg = <0x50027000 0x4>, <0x500273f0 0x10>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc SAI4_R>; + status = "disabled"; + + sai4a: audio-controller@50027004 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-a"; + reg = <0x04 0x1c>; + clocks = <&rcc SAI4_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 99 0x400 0x01>; + status = "disabled"; + }; + + sai4b: audio-controller@50027024 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x1c>; + clocks = <&rcc SAI4_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 100 0x400 0x01>; + status = "disabled"; + }; + }; + dts: thermal@50028000 { compatible = "st,stm32-thermal"; reg = <0x50028000 0x100>; @@ -1242,6 +1412,16 @@ status = "disabled"; }; + gpu: gpu@59000000 { + compatible = "vivante,gc"; + reg = <0x59000000 0x800>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc GPU>, <&rcc GPU_K>; + clock-names = "bus" ,"core"; + resets = <&rcc GPU_R>; + status = "disabled"; + }; + dsi: dsi@5a000000 { compatible = "st,stm32-dsi"; reg = <0x5a000000 0x800>; @@ -1363,4 +1543,24 @@ status = "disabled"; }; }; + + mlahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + dma-ranges = <0x00000000 0x38000000 0x10000>, + <0x10000000 0x10000000 0x60000>, + <0x30000000 0x30000000 0x60000>; + + m4_rproc: m4@10000000 { + compatible = "st,stm32mp1-m4"; + reg = <0x10000000 0x40000>, + <0x30000000 0x40000>, + <0x38000000 0x10000>; + resets = <&rcc MCU_R>; + st,syscfg-holdboot = <&rcc 0x10C 0x1>; + st,syscfg-tz = <&rcc 0x000 0x1>; + status = "disabled"; + }; + }; }; diff --git a/arch/arm/dts/stm32mp157xaa-pinctrl.dtsi b/arch/arm/dts/stm32mp157xaa-pinctrl.dtsi new file mode 100644 index 00000000000..875adf5e1e3 --- /dev/null +++ b/arch/arm/dts/stm32mp157xaa-pinctrl.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> + */ + +#include "stm32mp157-pinctrl.dtsi" +/ { + soc { + pinctrl: pin-controller@50002000 { + st,package = <STM32MP_PKG_AA>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio@5000b000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 144 16>; + }; + + gpiok: gpio@5000c000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 160 8>; + }; + }; + + pinctrl_z: pin-controller-z@54004000 { + st,package = <STM32MP_PKG_AA>; + + gpioz: gpio@54004000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; + }; + }; +}; diff --git a/arch/arm/dts/stm32mp157xab-pinctrl.dtsi b/arch/arm/dts/stm32mp157xab-pinctrl.dtsi new file mode 100644 index 00000000000..961fa12a59c --- /dev/null +++ b/arch/arm/dts/stm32mp157xab-pinctrl.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> + */ + +#include "stm32mp157-pinctrl.dtsi" +/ { + soc { + pinctrl: pin-controller@50002000 { + st,package = <STM32MP_PKG_AB>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <6>; + gpio-ranges = <&pinctrl 6 86 6>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl 6 102 10>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <2>; + gpio-ranges = <&pinctrl 0 112 2>; + }; + }; + }; +}; diff --git a/arch/arm/dts/stm32mp157xac-pinctrl.dtsi b/arch/arm/dts/stm32mp157xac-pinctrl.dtsi new file mode 100644 index 00000000000..26600f188d2 --- /dev/null +++ b/arch/arm/dts/stm32mp157xac-pinctrl.dtsi @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> + */ + +#include "stm32mp157-pinctrl.dtsi" +/ { + soc { + pinctrl: pin-controller@50002000 { + st,package = <STM32MP_PKG_AC>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 0 128 12>; + }; + }; + + pinctrl_z: pin-controller-z@54004000 { + st,package = <STM32MP_PKG_AC>; + + gpioz: gpio@54004000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; + }; + }; +}; diff --git a/arch/arm/dts/stm32mp157xad-pinctrl.dtsi b/arch/arm/dts/stm32mp157xad-pinctrl.dtsi new file mode 100644 index 00000000000..910113f3e69 --- /dev/null +++ b/arch/arm/dts/stm32mp157xad-pinctrl.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> + */ + +#include "stm32mp157-pinctrl.dtsi" +/ { + soc { + pinctrl: pin-controller@50002000 { + st,package = <STM32MP_PKG_AD>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <6>; + gpio-ranges = <&pinctrl 6 86 6>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl 6 102 10>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <2>; + gpio-ranges = <&pinctrl 0 112 2>; + }; + }; + }; +}; diff --git a/arch/arm/include/asm/mach-imx/mxc_i2c.h b/arch/arm/include/asm/mach-imx/mxc_i2c.h index 8e1ea9af19d..81fd9814447 100644 --- a/arch/arm/include/asm/mach-imx/mxc_i2c.h +++ b/arch/arm/include/asm/mach-imx/mxc_i2c.h @@ -6,6 +6,9 @@ #define __ASM_ARCH_MXC_MXC_I2C_H__ #include <asm-generic/gpio.h> #include <asm/mach-imx/iomux-v3.h> +#if CONFIG_IS_ENABLED(CLK) +#include <clk.h> +#endif struct i2c_pin_ctrl { iomux_v3_cfg_t i2c_mode; @@ -47,6 +50,9 @@ struct mxc_i2c_bus { ulong driver_data; int speed; struct i2c_pads_info *pads_info; +#if CONFIG_IS_ENABLED(CLK) + struct clk per_clk; +#endif #ifndef CONFIG_DM_I2C int (*idle_bus_fn)(void *p); void *idle_bus_data; diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c index 449544d11cf..463d283cb76 100644 --- a/arch/arm/lib/cache.c +++ b/arch/arm/lib/cache.c @@ -77,6 +77,7 @@ void noncached_init(void) phys_addr_t start, end; size_t size; + /* If this calculation changes, update board_f.c:reserve_noncached() */ end = ALIGN(mem_malloc_start, MMU_SECTION_SIZE) - MMU_SECTION_SIZE; size = ALIGN(CONFIG_SYS_NONCACHED_MEMORY, MMU_SECTION_SIZE); start = end - size; diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig index 9dc3c4d1c5f..c9bc0841949 100644 --- a/arch/arm/mach-stm32mp/Kconfig +++ b/arch/arm/mach-stm32mp/Kconfig @@ -16,8 +16,9 @@ config SPL select SPL_REGMAP select SPL_DM_RESET select SPL_SERIAL_SUPPORT + select SPL_SPI_LOAD select SPL_SYSCON - select SPL_WATCHDOG_SUPPORT + select SPL_WATCHDOG_SUPPORT if WATCHDOG imply BOOTSTAGE_STASH if SPL_BOOTSTAGE imply SPL_BOOTSTAGE if BOOTSTAGE imply SPL_DISPLAY_PRINT @@ -42,11 +43,15 @@ config TARGET_STM32MP1 select PINCTRL_STM32 select STM32_RCC select STM32_RESET + select STM32_SERIAL select SYS_ARCH_TIMER imply BOOTCOUNT_LIMIT imply BOOTSTAGE imply CMD_BOOTCOUNT imply CMD_BOOTSTAGE + imply DISABLE_CONSOLE + imply PRE_CONSOLE_BUFFER + imply SILENT_CONSOLE imply SYSRESET_PSCI if STM32MP1_TRUSTED imply SYSRESET_SYSCON if !STM32MP1_TRUSTED help @@ -109,6 +114,13 @@ config CMD_STM32KEY fuse public key hash in corresponding fuse used to authenticate binary. + +config PRE_CON_BUF_ADDR + default 0xC02FF000 + +config PRE_CON_BUF_SZ + default 4096 + config BOOTSTAGE_STASH_ADDR default 0xC3000000 diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile index ad5fd46ccda..eee39c27c3a 100644 --- a/arch/arm/mach-stm32mp/Makefile +++ b/arch/arm/mach-stm32mp/Makefile @@ -12,7 +12,8 @@ obj-y += spl.o else obj-y += bsec.o obj-$(CONFIG_CMD_STM32KEY) += cmd_stm32key.o -endif obj-$(CONFIG_ARMV7_PSCI) += psci.o +endif + obj-$(CONFIG_$(SPL_)DM_REGULATOR) += pwr_regulator.o obj-$(CONFIG_OF_SYSTEM_SETUP) += fdt.o diff --git a/arch/arm/mach-stm32mp/bsec.c b/arch/arm/mach-stm32mp/bsec.c index 80183668856..a77c706a1a0 100644 --- a/arch/arm/mach-stm32mp/bsec.c +++ b/arch/arm/mach-stm32mp/bsec.c @@ -364,15 +364,13 @@ static int stm32mp_bsec_read(struct udevice *dev, int offset, offs -= STM32_BSEC_OTP_OFFSET; shadow = false; } - otp = offs / sizeof(u32); - if (otp < 0 || (otp + nb_otp - 1) > BSEC_OTP_MAX_VALUE) { - dev_err(dev, "wrong value for otp, max value : %i\n", - BSEC_OTP_MAX_VALUE); + if (offs < 0 || (offs % 4) || (size % 4)) return -EINVAL; - } - for (i = otp; i < (otp + nb_otp); i++) { + otp = offs / sizeof(u32); + + for (i = otp; i < (otp + nb_otp) && i <= BSEC_OTP_MAX_VALUE; i++) { u32 *addr = &((u32 *)buf)[i - otp]; if (shadow) @@ -383,7 +381,10 @@ static int stm32mp_bsec_read(struct udevice *dev, int offset, if (ret) break; } - return ret; + if (ret) + return ret; + else + return (i - otp) * 4; } static int stm32mp_bsec_write(struct udevice *dev, int offset, @@ -400,15 +401,13 @@ static int stm32mp_bsec_write(struct udevice *dev, int offset, offs -= STM32_BSEC_OTP_OFFSET; shadow = false; } - otp = offs / sizeof(u32); - if (otp < 0 || (otp + nb_otp - 1) > BSEC_OTP_MAX_VALUE) { - dev_err(dev, "wrong value for otp, max value : %d\n", - BSEC_OTP_MAX_VALUE); + if (offs < 0 || (offs % 4) || (size % 4)) return -EINVAL; - } - for (i = otp; i < otp + nb_otp; i++) { + otp = offs / sizeof(u32); + + for (i = otp; i < otp + nb_otp && i <= BSEC_OTP_MAX_VALUE; i++) { u32 *val = &((u32 *)buf)[i - otp]; if (shadow) @@ -418,7 +417,10 @@ static int stm32mp_bsec_write(struct udevice *dev, int offset, if (ret) break; } - return ret; + if (ret) + return ret; + else + return (i - otp) * 4; } static const struct misc_ops stm32mp_bsec_ops = { diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h index 1d4b5482acc..b3e9ccc5d32 100644 --- a/arch/arm/mach-stm32mp/include/mach/stm32.h +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h @@ -94,6 +94,7 @@ enum boot_device { #define TAMP_BOOT_DEVICE_MASK GENMASK(7, 4) #define TAMP_BOOT_INSTANCE_MASK GENMASK(3, 0) #define TAMP_BOOT_FORCED_MASK GENMASK(7, 0) +#define TAMP_BOOT_DEBUG_ON BIT(16) enum forced_boot_mode { BOOT_NORMAL = 0x00, |