diff options
Diffstat (limited to 'arch/arm')
79 files changed, 2037 insertions, 830 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5d367888d8..bbb1e2738b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -989,6 +989,8 @@ config ARCH_SUNXI select USB_KEYBOARD if DISTRO_DEFAULTS select USB_STORAGE if DISTRO_DEFAULTS select SPL_USE_TINY_PRINTF + select USE_PREBOOT + select SYS_RELOC_GD_ENV_ADDR imply CMD_DM imply CMD_GPT imply CMD_UBI if MTD_RAW_NAND @@ -1366,6 +1368,7 @@ config TARGET_LS1028ARDB select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT + select BOARD_LATE_INIT help Support for Freescale LS1028ARDB platform The LS1028A Development System (RDB) is a high-performance diff --git a/arch/arm/cpu/armv8/cpu.c b/arch/arm/cpu/armv8/cpu.c index 2467e0b87b..35752037bc 100644 --- a/arch/arm/cpu/armv8/cpu.c +++ b/arch/arm/cpu/armv8/cpu.c @@ -32,6 +32,8 @@ void sdelay(unsigned long loops) "b.ne 1b" : "=r" (loops) : "0"(loops) : "cc"); } +void __weak board_cleanup_before_linux(void){} + int cleanup_before_linux(void) { /* @@ -40,6 +42,9 @@ int cleanup_before_linux(void) * * disable interrupt and turn off caches etc ... */ + + board_cleanup_before_linux(); + disable_interrupts(); /* diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 275c66d992..b25639183f 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -74,11 +74,11 @@ config ARCH_LS1043A select SYS_FSL_HAS_DDR4 select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F - select SYS_I2C_MXC - select SYS_I2C_MXC_I2C1 - select SYS_I2C_MXC_I2C2 - select SYS_I2C_MXC_I2C3 - select SYS_I2C_MXC_I2C4 + select SYS_I2C_MXC if !DM_I2C + select SYS_I2C_MXC_I2C1 if !DM_I2C + select SYS_I2C_MXC_I2C2 if !DM_I2C + select SYS_I2C_MXC_I2C3 if !DM_I2C + select SYS_I2C_MXC_I2C4 if !DM_I2C imply CMD_PCI config ARCH_LS1046A @@ -107,11 +107,11 @@ config ARCH_LS1046A select SYS_FSL_SRDS_2 select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F - select SYS_I2C_MXC - select SYS_I2C_MXC_I2C1 - select SYS_I2C_MXC_I2C2 - select SYS_I2C_MXC_I2C3 - select SYS_I2C_MXC_I2C4 + select SYS_I2C_MXC if !DM_I2C + select SYS_I2C_MXC_I2C1 if !DM_I2C + select SYS_I2C_MXC_I2C2 if !DM_I2C + select SYS_I2C_MXC_I2C3 if !DM_I2C + select SYS_I2C_MXC_I2C4 if !DM_I2C imply SCSI imply SCSI_AHCI diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 9c593b2c98..ec8fd112f9 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -180,7 +180,8 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra210-e2220-1170.dtb \ tegra210-p2371-0000.dtb \ tegra210-p2371-2180.dtb \ - tegra210-p2571.dtb + tegra210-p2571.dtb \ + tegra210-p3450-0000.dtb dtb-$(CONFIG_ARCH_MVEBU) += \ armada-3720-db.dtb \ @@ -276,6 +277,7 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \ zynqmp-zcu102-revA.dtb \ zynqmp-zcu102-revB.dtb \ zynqmp-zcu102-rev1.0.dtb \ + zynqmp-zcu102-rev1.1.dtb \ zynqmp-zcu104-revA.dtb \ zynqmp-zcu104-revC.dtb \ zynqmp-zcu106-revA.dtb \ diff --git a/arch/arm/dts/avnet-ultra96-rev1.dts b/arch/arm/dts/avnet-ultra96-rev1.dts index 88aa06fa78..ddb8febaec 100644 --- a/arch/arm/dts/avnet-ultra96-rev1.dts +++ b/arch/arm/dts/avnet-ultra96-rev1.dts @@ -2,7 +2,7 @@ /* * dts file for Avnet Ultra96 rev1 * - * (C) Copyright 2018, Xilinx, Inc. + * (C) Copyright 2018 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ diff --git a/arch/arm/dts/fsl-ls1028a-qds.dts b/arch/arm/dts/fsl-ls1028a-qds.dts index 3fd37beedf..029a8e386b 100644 --- a/arch/arm/dts/fsl-ls1028a-qds.dts +++ b/arch/arm/dts/fsl-ls1028a-qds.dts @@ -49,6 +49,8 @@ compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; }; }; diff --git a/arch/arm/dts/fsl-ls1028a-rdb.dts b/arch/arm/dts/fsl-ls1028a-rdb.dts index a8f40855b6..85b4815b2e 100644 --- a/arch/arm/dts/fsl-ls1028a-rdb.dts +++ b/arch/arm/dts/fsl-ls1028a-rdb.dts @@ -48,6 +48,8 @@ compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; }; }; diff --git a/arch/arm/dts/fsl-ls1046a-frwy.dts b/arch/arm/dts/fsl-ls1046a-frwy.dts index 3d41e3bd44..d39159322a 100644 --- a/arch/arm/dts/fsl-ls1046a-frwy.dts +++ b/arch/arm/dts/fsl-ls1046a-frwy.dts @@ -32,3 +32,6 @@ }; +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-ls1046a-qds.dtsi b/arch/arm/dts/fsl-ls1046a-qds.dtsi index c95f44fc36..76dc397328 100644 --- a/arch/arm/dts/fsl-ls1046a-qds.dtsi +++ b/arch/arm/dts/fsl-ls1046a-qds.dtsi @@ -80,3 +80,7 @@ &sata { status = "okay"; }; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-ls1046a-rdb.dts b/arch/arm/dts/fsl-ls1046a-rdb.dts index a05c9e9b9e..83e34ab02a 100644 --- a/arch/arm/dts/fsl-ls1046a-rdb.dts +++ b/arch/arm/dts/fsl-ls1046a-rdb.dts @@ -43,3 +43,11 @@ &sata { status = "okay"; }; + +&i2c0 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-lx2160a-qds.dts b/arch/arm/dts/fsl-lx2160a-qds.dts index 34df0f5106..592fd5977e 100644 --- a/arch/arm/dts/fsl-lx2160a-qds.dts +++ b/arch/arm/dts/fsl-lx2160a-qds.dts @@ -13,6 +13,9 @@ / { model = "NXP Layerscape LX2160AQDS Board"; compatible = "fsl,lx2160aqds", "fsl,lx2160a"; + aliases { + spi0 = &fspi; + }; }; &esdhc0 { @@ -46,6 +49,20 @@ }; }; +&fspi { + status = "okay"; + + mt35xu512aba0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; + }; +}; + &sata0 { status = "okay"; }; diff --git a/arch/arm/dts/fsl-lx2160a-rdb.dts b/arch/arm/dts/fsl-lx2160a-rdb.dts index e542c6992a..87617ca51f 100644 --- a/arch/arm/dts/fsl-lx2160a-rdb.dts +++ b/arch/arm/dts/fsl-lx2160a-rdb.dts @@ -39,6 +39,8 @@ compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; }; mt35xu512aba1: flash@1 { @@ -47,6 +49,8 @@ compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <1>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; }; }; diff --git a/arch/arm/dts/r8a7792-blanche-u-boot.dts b/arch/arm/dts/r8a7792-blanche-u-boot.dts index 3555663d64..30b27040f5 100644 --- a/arch/arm/dts/r8a7792-blanche-u-boot.dts +++ b/arch/arm/dts/r8a7792-blanche-u-boot.dts @@ -8,6 +8,10 @@ #include "r8a7792-blanche.dts" #include "r8a7792-u-boot.dtsi" +&iic3 { + status = "okay"; +}; + &scif0 { u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/r8a7792.dtsi b/arch/arm/dts/r8a7792.dtsi index 8e9eb4b704..6fd80e3541 100644 --- a/arch/arm/dts/r8a7792.dtsi +++ b/arch/arm/dts/r8a7792.dtsi @@ -444,6 +444,23 @@ status = "disabled"; }; + iic3: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7792", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 926>; + status = "disabled"; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7792", "renesas,rcar-dmac"; diff --git a/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi b/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi index 1908be4b8b..debeb8b239 100644 --- a/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi +++ b/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi @@ -37,3 +37,6 @@ u-boot,dm-pre-reloc; }; +&qspi { + status = "okay"; +}; diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi new file mode 100644 index 0000000000..422dad1ddd --- /dev/null +++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi @@ -0,0 +1,1153 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics. + */ +#include <dt-bindings/pinctrl/stm32-pinfunc.h> + +/ { + soc { + pinctrl: pin-controller@50002000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp157-pinctrl"; + ranges = <0 0x50002000 0xa400>; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; + hwlocks = <&hwspinlock 0>; + pins-are-numbered; + + gpioa: gpio@50002000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&rcc GPIOA>; + st,bank-name = "GPIOA"; + status = "disabled"; + }; + + gpiob: gpio@50003000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&rcc GPIOB>; + st,bank-name = "GPIOB"; + status = "disabled"; + }; + + gpioc: gpio@50004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&rcc GPIOC>; + st,bank-name = "GPIOC"; + status = "disabled"; + }; + + gpiod: gpio@50005000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x400>; + clocks = <&rcc GPIOD>; + st,bank-name = "GPIOD"; + status = "disabled"; + }; + + gpioe: gpio@50006000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x400>; + clocks = <&rcc GPIOE>; + st,bank-name = "GPIOE"; + status = "disabled"; + }; + + gpiof: gpio@50007000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x400>; + clocks = <&rcc GPIOF>; + st,bank-name = "GPIOF"; + status = "disabled"; + }; + + gpiog: gpio@50008000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x6000 0x400>; + clocks = <&rcc GPIOG>; + st,bank-name = "GPIOG"; + status = "disabled"; + }; + + gpioh: gpio@50009000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x7000 0x400>; + clocks = <&rcc GPIOH>; + st,bank-name = "GPIOH"; + status = "disabled"; + }; + + gpioi: gpio@5000a000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x8000 0x400>; + clocks = <&rcc GPIOI>; + st,bank-name = "GPIOI"; + status = "disabled"; + }; + + gpioj: gpio@5000b000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x9000 0x400>; + clocks = <&rcc GPIOJ>; + st,bank-name = "GPIOJ"; + status = "disabled"; + }; + + gpiok: gpio@5000c000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0xa000 0x400>; + clocks = <&rcc GPIOK>; + st,bank-name = "GPIOK"; + status = "disabled"; + }; + + adc12_ain_pins_a: adc12-ain-0 { + pins { + pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */ + <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */ + <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */ + <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */ + }; + }; + + adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */ + <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */ + }; + }; + + cec_pins_a: cec-0 { + pins { + pinmux = <STM32_PINMUX('A', 15, AF4)>; + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + cec_pins_sleep_a: cec-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */ + }; + }; + + cec_pins_b: cec-1 { + pins { + pinmux = <STM32_PINMUX('B', 6, AF5)>; + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + cec_pins_sleep_b: cec-sleep-1 { + pins { + pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */ + }; + }; + + dac_ch1_pins_a: dac-ch1 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>; + }; + }; + + dac_ch2_pins_a: dac-ch2 { + pins { + pinmux = <STM32_PINMUX('A', 5, ANALOG)>; + }; + }; + + dcmi_pins_a: dcmi-0 { + pins { + pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('H', 9, AF13)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */ + <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */ + <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */ + <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */ + <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */ + <STM32_PINMUX('H', 7, AF13)>,/* DCMI_D9 */ + <STM32_PINMUX('I', 3, AF13)>,/* DCMI_D10 */ + <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */ + bias-disable; + }; + }; + + dcmi_sleep_pins_a: dcmi-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('H', 9, ANALOG)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */ + <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */ + <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */ + <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */ + <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */ + <STM32_PINMUX('H', 7, ANALOG)>,/* DCMI_D9 */ + <STM32_PINMUX('I', 3, ANALOG)>,/* DCMI_D10 */ + <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */ + }; + }; + + ethernet0_rgmii_pins_a: rgmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ + }; + }; + + ethernet0_rgmii_pins_b: rgmii-1 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('B', 12, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('G', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_pins_sleep_b: rgmii-sleep-1 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('B', 12, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ + }; + }; + + fmc_pins_a: fmc-0 { + pins1 { + pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */ + <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */ + <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */ + <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */ + <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */ + <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */ + <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */ + <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */ + <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */ + <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */ + <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */ + <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */ + <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */ + bias-pull-up; + }; + }; + + fmc_sleep_pins_a: fmc-sleep-0 { + pins { + pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */ + <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */ + <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */ + <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */ + <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */ + <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */ + <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */ + <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */ + <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */ + <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */ + <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */ + <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */ + <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */ + <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */ + }; + }; + + i2c1_pins_a: i2c1-0 { + pins { + pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_pins_sleep_a: i2c1-1 { + pins { + pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ + }; + }; + + i2c1_pins_b: i2c1-2 { + pins { + pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_pins_sleep_b: i2c1-3 { + pins { + pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ + }; + }; + + i2c2_pins_a: i2c2-0 { + pins { + pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */ + <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_a: i2c2-1 { + pins { + pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */ + <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ + }; + }; + + i2c2_pins_b1: i2c2-2 { + pins { + pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b1: i2c2-3 { + pins { + pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ + }; + }; + + i2c5_pins_a: i2c5-0 { + pins { + pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */ + <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c5_pins_sleep_a: i2c5-1 { + pins { + pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */ + <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */ + + }; + }; + + i2s2_pins_a: i2s2-0 { + pins { + pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */ + <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */ + <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + }; + + i2s2_pins_sleep_a: i2s2-1 { + pins { + pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */ + <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */ + <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */ + }; + }; + + ltdc_pins_a: ltdc-a-0 { + pins { + pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */ + <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */ + <STM32_PINMUX('H', 2, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('H', 3, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('H', 8, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('H', 9, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('C', 0, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('E', 5, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('E', 6, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('I', 0, AF14)>, /* LCD_G5 */ + <STM32_PINMUX('I', 1, AF14)>, /* LCD_G6 */ + <STM32_PINMUX('I', 2, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('D', 9, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('I', 4, AF14)>, /* LCD_B4 */ + <STM32_PINMUX('A', 3, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('D', 8, AF14)>; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_pins_sleep_a: ltdc-a-1 { + pins { + pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */ + <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */ + <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */ + <STM32_PINMUX('H', 2, ANALOG)>, /* LCD_R0 */ + <STM32_PINMUX('H', 3, ANALOG)>, /* LCD_R1 */ + <STM32_PINMUX('H', 8, ANALOG)>, /* LCD_R2 */ + <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_R3 */ + <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */ + <STM32_PINMUX('C', 0, ANALOG)>, /* LCD_R5 */ + <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */ + <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* LCD_G0 */ + <STM32_PINMUX('E', 6, ANALOG)>, /* LCD_G1 */ + <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */ + <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */ + <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */ + <STM32_PINMUX('I', 0, ANALOG)>, /* LCD_G5 */ + <STM32_PINMUX('I', 1, ANALOG)>, /* LCD_G6 */ + <STM32_PINMUX('I', 2, ANALOG)>, /* LCD_G7 */ + <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_B0 */ + <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */ + <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */ + <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */ + <STM32_PINMUX('I', 4, ANALOG)>, /* LCD_B4 */ + <STM32_PINMUX('A', 3, ANALOG)>, /* LCD_B5 */ + <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */ + <STM32_PINMUX('D', 8, ANALOG)>; /* LCD_B7 */ + }; + }; + + ltdc_pins_b: ltdc-b-0 { + pins { + pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */ + <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('K', 7, AF14)>, /* LCD_DE */ + <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */ + <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */ + <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */ + <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('K', 6, AF14)>; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_pins_sleep_b: ltdc-b-1 { + pins { + pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */ + <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */ + <STM32_PINMUX('K', 7, ANALOG)>, /* LCD_DE */ + <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */ + <STM32_PINMUX('J', 0, ANALOG)>, /* LCD_R1 */ + <STM32_PINMUX('J', 1, ANALOG)>, /* LCD_R2 */ + <STM32_PINMUX('J', 2, ANALOG)>, /* LCD_R3 */ + <STM32_PINMUX('J', 3, ANALOG)>, /* LCD_R4 */ + <STM32_PINMUX('J', 4, ANALOG)>, /* LCD_R5 */ + <STM32_PINMUX('J', 5, ANALOG)>, /* LCD_R6 */ + <STM32_PINMUX('J', 6, ANALOG)>, /* LCD_R7 */ + <STM32_PINMUX('J', 7, ANALOG)>, /* LCD_G0 */ + <STM32_PINMUX('J', 8, ANALOG)>, /* LCD_G1 */ + <STM32_PINMUX('J', 9, ANALOG)>, /* LCD_G2 */ + <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */ + <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */ + <STM32_PINMUX('K', 0, ANALOG)>, /* LCD_G5 */ + <STM32_PINMUX('K', 1, ANALOG)>, /* LCD_G6 */ + <STM32_PINMUX('K', 2, ANALOG)>, /* LCD_G7 */ + <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */ + <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */ + <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */ + <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */ + <STM32_PINMUX('K', 3, ANALOG)>, /* LCD_B4 */ + <STM32_PINMUX('K', 4, ANALOG)>, /* LCD_B5 */ + <STM32_PINMUX('K', 5, ANALOG)>, /* LCD_B6 */ + <STM32_PINMUX('K', 6, ANALOG)>; /* LCD_B7 */ + }; + }; + + m_can1_pins_a: m-can1-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */ + bias-disable; + }; + }; + + m_can1_sleep_pins_a: m_can1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */ + <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */ + }; + }; + + pwm2_pins_a: pwm2-0 { + pins { + pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm8_pins_a: pwm8-0 { + pins { + pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm12_pins_a: pwm12-0 { + pins { + pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + qspi_clk_pins_a: qspi-clk-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; + + qspi_clk_sleep_pins_a: qspi-clk-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */ + }; + }; + + qspi_bk1_pins_a: qspi-bk1-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; + }; + + qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */ + <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */ + }; + }; + + qspi_bk2_pins_a: qspi-bk2-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */ + <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */ + <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */ + <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; + }; + + qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */ + <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */ + <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */ + <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */ + <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */ + }; + }; + + sai2a_pins_a: sai2a-0 { + pins { + pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */ + <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */ + <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai2a_sleep_pins_a: sai2a-1 { + pins { + pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */ + <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */ + <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */ + }; + }; + + sai2b_pins_a: sai2b-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */ + <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */ + <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_a: sai2b-1 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */ + <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */ + <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */ + <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */ + }; + }; + + sai2b_pins_b: sai2b-2 { + pins { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_b: sai2b-3 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */ + }; + }; + + sai4a_pins_a: sai4a-0 { + pins { + pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai4a_sleep_pins_a: sai4a-1 { + pins { + pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */ + }; + }; + + sdmmc1_b4_pins_a: sdmmc1-b4-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + pins2{ + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ + }; + }; + + sdmmc1_dir_pins_a: sdmmc1-dir-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */ + slew-rate = <3>; + drive-push-pull; + bias-pull-up; + }; + pins2{ + pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */ + bias-pull-up; + }; + }; + + sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ + <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */ + }; + }; + + sdmmc1_dir_pins_b: sdmmc1-dir-1 { + pins1 { + pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('E', 14, AF8)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2{ + pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */ + bias-pull-up; + }; + }; + + sdmmc1_dir_sleep_pins_b: sdmmc1-dir-sleep-1 { + pins { + pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('E', 14, ANALOG)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ + <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */ + }; + }; + + sdmmc2_b4_pins_a: sdmmc2-b4-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ + <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + pins3 { + pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */ + <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */ + <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */ + }; + }; + + sdmmc2_d47_pins_a: sdmmc2-d47-0 { + pins { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */ + }; + }; + + sdmmc2_d47_pins_b: sdmmc2-d47-1 { + pins { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 15, AF9)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_d47_sleep_pins_b: sdmmc2-d47-sleep-1 { + pins { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 15, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */ + }; + }; + + spdifrx_pins_a: spdifrx-0 { + pins { + pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */ + bias-disable; + }; + }; + + spdifrx_sleep_pins_a: spdifrx-1 { + pins { + pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */ + }; + }; + + spi2_pins_a: spi2-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */ + <STM32_PINMUX('I', 0, AF5)>, /* SPI2_NSS */ + <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */ + bias-disable; + }; + }; + + stusb1600_pins_a: stusb1600-0 { + pins { + pinmux = <STM32_PINMUX('I', 11, ANALOG)>; + bias-pull-up; + }; + }; + + uart4_pins_a: uart4-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_pins_b: uart4-1 { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart7_pins_a: uart7-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */ + <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */ + <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */ + bias-disable; + }; + }; + }; + + pinctrl_z: pin-controller-z@54004000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp157-z-pinctrl"; + ranges = <0 0x54004000 0x400>; + pins-are-numbered; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; + hwlocks = <&hwspinlock 0>; + + gpioz: gpio@54004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x400>; + clocks = <&rcc GPIOZ>; + st,bank-name = "GPIOZ"; + st,bank-ioport = <11>; + status = "disabled"; + }; + + i2c2_pins_b2: i2c2-0 { + pins { + pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b2: i2c2-1 { + pins { + pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */ + }; + }; + + i2c4_pins_a: i2c4-0 { + pins { + pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */ + <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c4_pins_sleep_a: i2c4-1 { + pins { + pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */ + <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */ + }; + }; + + spi1_pins_a: spi1-0 { + pins1 { + pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */ + <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */ + bias-disable; + }; + }; + }; + }; +}; diff --git a/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi b/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi index 228635b6c6..f2ff7a23c5 100644 --- a/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi @@ -153,9 +153,12 @@ }; }; -&sdmmc1_dir_pins_a { +&sdmmc1_dir_pins_b { u-boot,dm-spl; - pins { + pins1 { + u-boot,dm-spl; + }; + pins2 { u-boot,dm-spl; }; }; @@ -174,7 +177,7 @@ }; }; -&sdmmc2_d47_pins_a { +&sdmmc2_d47_pins_b { u-boot,dm-spl; pins { u-boot,dm-spl; diff --git a/arch/arm/dts/stm32mp157a-avenger96.dts b/arch/arm/dts/stm32mp157a-avenger96.dts index 5bc377d5e3..80ee9c0a2c 100644 --- a/arch/arm/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/dts/stm32mp157a-avenger96.dts @@ -8,6 +8,7 @@ #include "stm32mp157.dtsi" #include "stm32mp15-pinctrl.dtsi" +#include "stm32mp157-pinctrl.dtsi" #include "stm32mp15xxac-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/st,stpmic1.h> @@ -17,10 +18,12 @@ compatible = "arrow,stm32mp157a-avenger96", "st,stm32mp157"; aliases { + eeprom0 = &eeprom0; ethernet0 = ðernet0; mmc0 = &sdmmc1; serial0 = &uart4; serial1 = &uart7; + spi0 = &qspi; }; chosen { @@ -77,16 +80,42 @@ default-state = "off"; }; }; + + sd_switch: regulator-sd_switch { + compatible = "regulator-gpio"; + regulator-name = "sd_switch"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-type = "voltage"; + regulator-always-on; + + gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1>, + <2900000 0x0>; + }; + + /* Enpirion EP3A8LQI U2 on the DHCOR */ + vdd_io: regulator-buck-io { + compatible = "regulator-fixed"; + regulator-name = "buck-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd>; + }; }; ðernet0 { status = "okay"; - pinctrl-0 = <ðernet0_rgmii_pins_a>; - pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-0 = <ðernet0_rgmii_pins_b>; + pinctrl-1 = <ðernet0_rgmii_pins_sleep_b>; pinctrl-names = "default", "sleep"; phy-mode = "rgmii"; max-speed = <1000>; phy-handle = <&phy0>; + phy-reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>; mdio0 { #address-cells = <1>; @@ -152,7 +181,7 @@ vddcore: buck1 { regulator-name = "vddcore"; - regulator-min-microvolt = <1200000>; + regulator-min-microvolt = <800000>; regulator-max-microvolt = <1350000>; regulator-always-on; regulator-initial-mode = <0>; @@ -170,8 +199,8 @@ vdd: buck3 { regulator-name = "vdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; regulator-always-on; st,mask_reset; regulator-initial-mode = <0>; @@ -253,6 +282,7 @@ regulator-name = "vbus_otg"; interrupts = <IT_OCP_OTG 0>; interrupt-parent = <&pmic>; + regulator-active-discharge = <1>; }; vbus_sw: pwr_sw2 { @@ -275,6 +305,12 @@ status = "disabled"; }; }; + + eeprom0: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; }; &iwdg2 { @@ -283,10 +319,29 @@ }; &pwr_regulators { - vdd-supply = <&vdd>; + vdd-supply = <&vdd_io>; vdd_3v3_usbfs-supply = <&vdd_usb>; }; +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + reg = <0x58003000 0x1000>, <0x70000000 0x200000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash0: spi-flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + &rng1 { status = "okay"; }; @@ -297,21 +352,24 @@ &sdmmc1 { pinctrl-names = "default", "opendrain", "sleep"; - pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; - pinctrl-1 = <&sdmmc1_b4_od_pins_a>; - pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; - broken-cd; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>; + cd-gpios = <&gpioi 8 GPIO_ACTIVE_LOW>; + disable-wp; st,sig-dir; st,neg-edge; st,use-ckin; + sd-uhs-sdr104; bus-width = <4>; vmmc-supply = <&vdd_sd>; + vqmmc-supply = <&sd_switch>; status = "okay"; }; &sdmmc2 { pinctrl-names = "default"; - pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>; non-removable; no-sd; no-sdio; diff --git a/arch/arm/dts/stm32mp15xx-dhcom.dtsi b/arch/arm/dts/stm32mp15xx-dhcom.dtsi index 31da41bfca..d8a255b9c6 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom.dtsi @@ -12,6 +12,10 @@ #include <dt-bindings/mfd/st,stpmic1.h> / { + aliases { + eeprom0 = &eeprom0; + }; + memory@c0000000 { device_type = "memory"; reg = <0xC0000000 0x40000000>; @@ -189,7 +193,7 @@ }; }; - eeprom@50 { + eeprom0: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; pagesize = <16>; diff --git a/arch/arm/dts/tegra210-p2371-2180.dts b/arch/arm/dts/tegra210-p2371-2180.dts index c2f497c524..649c163152 100644 --- a/arch/arm/dts/tegra210-p2371-2180.dts +++ b/arch/arm/dts/tegra210-p2371-2180.dts @@ -12,6 +12,8 @@ aliases { i2c0 = "/i2c@7000d000"; + i2c2 = "/i2c@7000c400"; + i2c3 = "/i2c@7000c500"; mmc0 = "/sdhci@700b0600"; mmc1 = "/sdhci@700b0000"; usb0 = "/usb@7d000000"; @@ -85,6 +87,16 @@ non-removable; }; + i2c@7000c400 { + status = "okay"; + clock-frequency = <400000>; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <400000>; + }; + i2c@7000d000 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm/dts/tegra210-p3450-0000.dts b/arch/arm/dts/tegra210-p3450-0000.dts new file mode 100644 index 0000000000..9ef744ac8b --- /dev/null +++ b/arch/arm/dts/tegra210-p3450-0000.dts @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019-2020 NVIDIA Corporation <www.nvidia.com> + */ +/dts-v1/; + +#include "tegra210.dtsi" + +/ { + model = "NVIDIA Jetson Nano Developer Kit"; + compatible = "nvidia,p3450-0000", "nvidia,tegra210"; + + chosen { + stdout-path = &uarta; + }; + + aliases { + ethernet = "/pcie@1003000/pci@2,0/ethernet@0,0"; + i2c0 = "/i2c@7000d000"; + i2c2 = "/i2c@7000c400"; + i2c3 = "/i2c@7000c500"; + i2c4 = "/i2c@7000c700"; + mmc0 = "/sdhci@700b0600"; + mmc1 = "/sdhci@700b0000"; + spi0 = "/spi@70410000"; + usb0 = "/usb@7d000000"; + }; + + memory { + reg = <0x0 0x80000000 0x0 0xc0000000>; + }; + + pcie@1003000 { + status = "okay"; + + pci@1,0 { + status = "okay"; + }; + + pci@2,0 { + status = "okay"; + + ethernet@0,0 { + reg = <0x000000 0 0 0 0>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + }; + + serial@70006000 { + status = "okay"; + }; + + padctl@7009f000 { + pinctrl-0 = <&padctl_default>; + pinctrl-names = "default"; + + padctl_default: pinmux { + xusb { + nvidia,lanes = "otg-1", "otg-2"; + nvidia,function = "xusb"; + nvidia,iddq = <0>; + }; + + usb3 { + nvidia,lanes = "pcie-5", "pcie-6"; + nvidia,function = "usb3"; + nvidia,iddq = <0>; + }; + + pcie-x1 { + nvidia,lanes = "pcie-0"; + nvidia,function = "pcie-x1"; + nvidia,iddq = <0>; + }; + + pcie-x4 { + nvidia,lanes = "pcie-1", "pcie-2", + "pcie-3", "pcie-4"; + nvidia,function = "pcie-x4"; + nvidia,iddq = <0>; + }; + + sata { + nvidia,lanes = "sata-0"; + nvidia,function = "sata"; + nvidia,iddq = <0>; + }; + }; + }; + + sdhci@700b0000 { + status = "okay"; + cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + }; + + sdhci@700b0600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + i2c@7000c400 { + status = "okay"; + clock-frequency = <400000>; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <400000>; + }; + + i2c@7000c700 { + status = "okay"; + clock-frequency = <400000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + }; + + spi@70410000 { + status = "okay"; + spi-max-frequency = <80000000>; + }; + + usb@7d000000 { + status = "okay"; + dr_mode = "peripheral"; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; diff --git a/arch/arm/dts/zynq-cse-nor.dts b/arch/arm/dts/zynq-cse-nor.dts index 9710abadcf..197fbd717a 100644 --- a/arch/arm/dts/zynq-cse-nor.dts +++ b/arch/arm/dts/zynq-cse-nor.dts @@ -5,7 +5,6 @@ * Copyright (C) 2018 Xilinx, Inc. */ /dts-v1/; -#include "zynq-7000.dtsi" / { #address-cells = <1>; @@ -33,27 +32,21 @@ }; amba: amba { + u-boot,dm-pre-reloc; compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - interrupt-parent = <&intc>; ranges; - intc: interrupt-controller@f8f01000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0xF8F01000 0x1000>, - <0xF8F00100 0x100>; - }; - slcr: slcr@f8000000 { + u-boot,dm-pre-reloc; #address-cells = <1>; #size-cells = <1>; compatible = "xlnx,zynq-slcr", "syscon", "simple-bus"; reg = <0xF8000000 0x1000>; ranges; clkc: clkc@100 { + u-boot,dm-pre-reloc; #clock-cells = <1>; compatible = "xlnx,ps7-clkc"; clock-output-names = "armpll", "ddrpll", @@ -78,6 +71,20 @@ reg = <0x100 0x100>; }; }; + + /* + * This is partially hack because it is normally subnode of smcc + * but for mini U-Boot there is no reason to enable SMCC driver + * which does almost nothing in NOR flash configuration that's + * why place cfi-flash directly here. + */ + flash@e2000000 { + u-boot,dm-pre-reloc; + compatible = "cfi-flash"; + reg = <0xe2000000 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + }; }; }; diff --git a/arch/arm/dts/zynq-cse-qspi.dtsi b/arch/arm/dts/zynq-cse-qspi.dtsi index 65af4081ff..eb0e29e6cb 100644 --- a/arch/arm/dts/zynq-cse-qspi.dtsi +++ b/arch/arm/dts/zynq-cse-qspi.dtsi @@ -67,23 +67,23 @@ spi-max-frequency = <50000000>; #address-cells = <1>; #size-cells = <1>; - partition@qspi-fsbl-uboot { + partition@0 { label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { + partition@100000 { label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { + partition@600000 { label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { + partition@620000 { label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; - partition@qspi-bitstream { + partition@c00000 { label = "qspi-bitstream"; reg = <0xC00000 0x400000>; }; diff --git a/arch/arm/dts/zynq-topic-miami.dts b/arch/arm/dts/zynq-topic-miami.dts index f6f10fe1a1..ab6bde95fe 100644 --- a/arch/arm/dts/zynq-topic-miami.dts +++ b/arch/arm/dts/zynq-topic-miami.dts @@ -44,23 +44,23 @@ spi-max-frequency = <100000000>; #address-cells = <1>; #size-cells = <1>; - partition@qspi-u-boot-spl { + partition@0 { label = "qspi-u-boot-spl"; reg = <0x00000 0x10000>; }; - partition@qspi-u-boot-img { + partition@10000 { label = "qspi-u-boot-img"; reg = <0x10000 0x60000>; }; - partition@qspi-device-tree { + partition@70000 { label = "qspi-device-tree"; reg = <0x70000 0x10000>; }; - partition@qspi-linux { + partition@80000 { label = "qspi-linux"; reg = <0x80000 0x400000>; }; - partition@qspi-rootfs { + partition@480000 { label = "qspi-rootfs"; reg = <0x480000 0x1b80000>; }; diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts index d10695740f..b043d341d6 100644 --- a/arch/arm/dts/zynq-zc702.dts +++ b/arch/arm/dts/zynq-zc702.dts @@ -181,17 +181,17 @@ #address-cells = <1>; #size-cells = <0>; reg = <7>; - hwmon@52 { + hwmon@34 { compatible = "ti,ucd9248"; - reg = <52>; + reg = <0x34>; }; - hwmon@53 { + hwmon@35 { compatible = "ti,ucd9248"; - reg = <53>; + reg = <0x35>; }; - hwmon@54 { + hwmon@36 { compatible = "ti,ucd9248"; - reg = <54>; + reg = <0x36>; }; }; }; diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts index e1f34653ec..c547d7921d 100644 --- a/arch/arm/dts/zynq-zc770-xm010.dts +++ b/arch/arm/dts/zynq-zc770-xm010.dts @@ -72,7 +72,7 @@ status = "okay"; num-cs = <4>; is-decoded-cs = <0>; - flash@0 { + flash@1 { compatible = "sst25wf080", "jedec,spi-nor"; reg = <1>; spi-max-frequency = <1000000>; diff --git a/arch/arm/dts/zynq-zc770-xm011-x16.dts b/arch/arm/dts/zynq-zc770-xm011-x16.dts index 5bd6af39a4..6ff8393d7e 120000..100644 --- a/arch/arm/dts/zynq-zc770-xm011-x16.dts +++ b/arch/arm/dts/zynq-zc770-xm011-x16.dts @@ -1 +1,11 @@ -zynq-zc770-xm011.dts
\ No newline at end of file +// SPDX-License-Identifier: GPL-2.0+ +/* + * Xilinx ZC770 XM011 board DTS with NAND x16 + * + * Copyright (C) 2013-2018 Xilinx, Inc. + */ +#include "zynq-zc770-xm011.dts" + +/ { + model = "Xilinx ZC770 XM011 board (NAND x16)"; +}; diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts index 61482017d6..b6e3e255d7 100644 --- a/arch/arm/dts/zynq-zc770-xm011.dts +++ b/arch/arm/dts/zynq-zc770-xm011.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Xilinx ZC770 XM013 board DTS + * Xilinx ZC770 XM011 board DTS * * Copyright (C) 2013-2018 Xilinx, Inc. */ diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts index 05a49982cc..bdf0c2f956 100644 --- a/arch/arm/dts/zynq-zc770-xm013.dts +++ b/arch/arm/dts/zynq-zc770-xm013.dts @@ -67,7 +67,7 @@ status = "okay"; num-cs = <4>; is-decoded-cs = <0>; - eeprom: eeprom@0 { + eeprom: eeprom@2 { at25,byte-len = <8192>; at25,addr-mode = <2>; at25,page-size = <32>; diff --git a/arch/arm/dts/zynq-zturn.dts b/arch/arm/dts/zynq-zturn.dts index cc41efcb46..600e8ee025 100644 --- a/arch/arm/dts/zynq-zturn.dts +++ b/arch/arm/dts/zynq-zturn.dts @@ -54,7 +54,7 @@ label = "K1"; gpios = <&gpio0 0x32 0x1>; linux,code = <0x66>; - gpio-key,wakeup; + wakeup-source; autorepeat; }; }; diff --git a/arch/arm/dts/zynqmp-clk-ccf.dtsi b/arch/arm/dts/zynqmp-clk-ccf.dtsi index 8eacd22d7c..b02ef22abd 100644 --- a/arch/arm/dts/zynqmp-clk-ccf.dtsi +++ b/arch/arm/dts/zynqmp-clk-ccf.dtsi @@ -2,7 +2,7 @@ /* * Clock specification for Xilinx ZynqMP * - * (C) Copyright 2017 - 2019, Xilinx, Inc. + * (C) Copyright 2017 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -284,10 +284,18 @@ clocks = <&zynqmp_clk AMS_REF>; }; +&zynqmp_dpsub { + clocks = <&dp_aclk>, <&zynqmp_clk DP_AUDIO_REF>, <&zynqmp_clk DP_VIDEO_REF>; +}; + &xlnx_dpdma { clocks = <&zynqmp_clk DPDMA_REF>; }; -&xlnx_dp_snd_codec0 { +&zynqmp_dp_snd_codec0 { clocks = <&zynqmp_clk DP_AUDIO_REF>; }; + +&zynqmp_pcap { + clocks = <&zynqmp_clk PCAP>; +}; diff --git a/arch/arm/dts/zynqmp-clk.dtsi b/arch/arm/dts/zynqmp-clk.dtsi deleted file mode 100644 index c9464ec8eb..0000000000 --- a/arch/arm/dts/zynqmp-clk.dtsi +++ /dev/null @@ -1,244 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Clock specification for Xilinx ZynqMP - * - * (C) Copyright 2015 - 2018, Xilinx, Inc. - * - * Michal Simek <michal.simek@xilinx.com> - */ - -/ { - clk100: clk100 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - u-boot,dm-pre-reloc; - }; - - clk125: clk125 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - clk200: clk200 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - u-boot,dm-pre-reloc; - }; - - clk250: clk250 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <250000000>; - }; - - clk300: clk300 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <300000000>; - u-boot,dm-pre-reloc; - }; - - clk600: clk600 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <600000000>; - }; - - dp_aclk: clock0 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - clock-accuracy = <100>; - }; - - dp_aud_clk: clock1 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; - clock-accuracy = <100>; - }; - - dpdma_clk: dpdma-clk { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <533000000>; - }; - - drm_clock: drm-clock { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <262750000>; - clock-accuracy = <0x64>; - }; -}; - -&can0 { - clocks = <&clk100 &clk100>; -}; - -&can1 { - clocks = <&clk100 &clk100>; -}; - -&fpd_dma_chan1 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan2 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan3 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan4 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan5 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan6 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan7 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan8 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan1 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan2 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan3 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan4 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan5 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan6 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan7 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan8 { - clocks = <&clk600>, <&clk100>; -}; - -&nand0 { - clocks = <&clk100 &clk100>; -}; - -&gem0 { - clocks = <&clk125>, <&clk125>, <&clk125>; -}; - -&gem1 { - clocks = <&clk125>, <&clk125>, <&clk125>; -}; - -&gem2 { - clocks = <&clk125>, <&clk125>, <&clk125>; -}; - -&gem3 { - clocks = <&clk125>, <&clk125>, <&clk125>; -}; - -&gpio { - clocks = <&clk100>; -}; - -&i2c0 { - clocks = <&clk100>; -}; - -&i2c1 { - clocks = <&clk100>; -}; - -&qspi { - clocks = <&clk300 &clk300>; -}; - -&sata { - clocks = <&clk250>; -}; - -&sdhci0 { - clocks = <&clk200 &clk200>; -}; - -&sdhci1 { - clocks = <&clk200 &clk200>; -}; - -&spi0 { - clocks = <&clk200 &clk200>; -}; - -&spi1 { - clocks = <&clk200 &clk200>; -}; - -&uart0 { - clocks = <&clk100 &clk100>; -}; - -&uart1 { - clocks = <&clk100 &clk100>; -}; - -&usb0 { - clocks = <&clk250>, <&clk250>; -}; - -&usb1 { - clocks = <&clk250>, <&clk250>; -}; - -&watchdog0 { - clocks = <&clk100>; -}; - -&lpd_watchdog { - clocks = <&clk250>; -}; - -&xilinx_drm { - clocks = <&drm_clock>; -}; - -&xlnx_dp { - clocks = <&dp_aclk>, <&dp_aud_clk>; -}; - -&xlnx_dpdma { - clocks = <&dpdma_clk>; -}; - -&xlnx_dp_snd_codec0 { - clocks = <&dp_aud_clk>; -}; diff --git a/arch/arm/dts/zynqmp-mini-qspi.dts b/arch/arm/dts/zynqmp-mini-qspi.dts index e4ba5ae9b6..c523e81236 100644 --- a/arch/arm/dts/zynqmp-mini-qspi.dts +++ b/arch/arm/dts/zynqmp-mini-qspi.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP Mini Configuration * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2020, Xilinx, Inc. * * Siva Durga Prasad <siva.durga.paladugu@xilinx.com> * Michal Simek <michal.simek@xilinx.com> diff --git a/arch/arm/dts/zynqmp-zc1232-revA.dts b/arch/arm/dts/zynqmp-zc1232-revA.dts index 6117f83c47..afb3e96520 100644 --- a/arch/arm/dts/zynqmp-zc1232-revA.dts +++ b/arch/arm/dts/zynqmp-zc1232-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZC1232 * - * (C) Copyright 2017 - 2018, Xilinx, Inc. + * (C) Copyright 2017 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -48,19 +48,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zc1254-revA.dts b/arch/arm/dts/zynqmp-zc1254-revA.dts index 6ac8346d23..9cc1c0c6c5 100644 --- a/arch/arm/dts/zynqmp-zc1254-revA.dts +++ b/arch/arm/dts/zynqmp-zc1254-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZC1254 * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * Siva Durga Prasad Paladugu <sivadur@xilinx.com> @@ -48,19 +48,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts index bb6a94eefb..0805b93c4a 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm015-dc1 * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -108,19 +108,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; @@ -154,7 +154,10 @@ /* SD1 with level shifter */ &sdhci1 { status = "okay"; - no-1-8-v; /* for 1.0 silicon */ + /* + * This property should be removed for supporting UHS mode + */ + no-1-8-v; xlnx,mio_bank = <1>; }; @@ -172,32 +175,23 @@ dr_mode = "host"; }; -&xilinx_drm { +&zynqmp_dpsub { status = "okay"; }; -&xlnx_dp { +&zynqmp_dp_snd_pcm0 { status = "okay"; }; -&xlnx_dp_sub { +&zynqmp_dp_snd_pcm1 { status = "okay"; - xlnx,vid-clk-pl; }; -&xlnx_dp_snd_pcm0 { +&zynqmp_dp_snd_card0 { status = "okay"; }; -&xlnx_dp_snd_pcm1 { - status = "okay"; -}; - -&xlnx_dp_snd_card { - status = "okay"; -}; - -&xlnx_dp_snd_codec0 { +&zynqmp_dp_snd_codec0 { status = "okay"; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts index 1cc8aaa879..92d938d665 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm016-dc2 * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -197,7 +197,7 @@ reg = <0>; partition@0 { - label = "data"; + label = "spi0-data"; reg = <0x0 0x100000>; }; }; @@ -214,7 +214,7 @@ reg = <0>; partition@0 { - label = "data"; + label = "spi1-data"; reg = <0x0 0x84000>; }; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts index 2ead8dd24d..c7de59e1e9 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm017-dc3 * - * (C) Copyright 2016 - 2018, Xilinx, Inc. + * (C) Copyright 2016 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ diff --git a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts index 84c2904dc2..9b38b8b919 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm018-dc4 * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -115,7 +115,7 @@ status = "okay"; }; -&xlnx_dp { +&zynqmp_dpsub { status = "okay"; }; @@ -187,19 +187,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; /* also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts index 12c0173c55..8d8ebeaac3 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm019-dc5 * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2020, Xilinx, Inc. * * Siva Durga Prasad <siva.durga.paladugu@xilinx.com> * Michal Simek <michal.simek@xilinx.com> diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts index 21118c8cc3..1726edf78e 100644 --- a/arch/arm/dts/zynqmp-zcu100-revC.dts +++ b/arch/arm/dts/zynqmp-zcu100-revC.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU100 revC * - * (C) Copyright 2016 - 2018, Xilinx, Inc. + * (C) Copyright 2016 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * Nathalie Chan King Choy diff --git a/arch/arm/dts/zynqmp-zcu102-rev1.0.dts b/arch/arm/dts/zynqmp-zcu102-rev1.0.dts index 6c702f2674..d508f33599 100644 --- a/arch/arm/dts/zynqmp-zcu102-rev1.0.dts +++ b/arch/arm/dts/zynqmp-zcu102-rev1.0.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU102 Rev1.0 * - * (C) Copyright 2016 - 2018, Xilinx, Inc. + * (C) Copyright 2016 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -34,7 +34,3 @@ reg = <0xe0 0x3>; }; }; - -&sdhci1 { - /delete-property/ no-1-8-v; -}; diff --git a/arch/arm/dts/zynqmp-zcu102-rev1.1.dts b/arch/arm/dts/zynqmp-zcu102-rev1.1.dts new file mode 100644 index 0000000000..b6798394fc --- /dev/null +++ b/arch/arm/dts/zynqmp-zcu102-rev1.1.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU102 Rev1.1 + * + * (C) Copyright 2016 - 2020, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +#include "zynqmp-zcu102-rev1.0.dts" + +/ { + model = "ZynqMP ZCU102 Rev1.1"; + compatible = "xlnx,zynqmp-zcu102-rev1.1", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; +}; diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts index b580f9263d..d250681600 100644 --- a/arch/arm/dts/zynqmp-zcu102-revA.dts +++ b/arch/arm/dts/zynqmp-zcu102-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU102 RevA * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -614,19 +614,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; @@ -655,7 +655,11 @@ /* SD1 with level shifter */ &sdhci1 { status = "okay"; - no-1-8-v; /* for 1.0 silicon */ + /* + * 1.0 revision has level shifter and this property should be + * removed for supporting UHS mode + */ + no-1-8-v; xlnx,mio_bank = <1>; }; @@ -701,33 +705,23 @@ status = "okay"; }; -&xilinx_drm { +&zynqmp_dpsub { status = "okay"; - clocks = <&si570_1>; }; -&xlnx_dp { +&zynqmp_dp_snd_codec0 { status = "okay"; }; -&xlnx_dp_sub { +&zynqmp_dp_snd_pcm0 { status = "okay"; - xlnx,vid-clk-pl; }; -&xlnx_dp_snd_pcm0 { +&zynqmp_dp_snd_pcm1 { status = "okay"; }; -&xlnx_dp_snd_pcm1 { - status = "okay"; -}; - -&xlnx_dp_snd_card { - status = "okay"; -}; - -&xlnx_dp_snd_codec0 { +&zynqmp_dp_snd_card0 { status = "okay"; }; diff --git a/arch/arm/dts/zynqmp-zcu102-revB.dts b/arch/arm/dts/zynqmp-zcu102-revB.dts index 38ec188164..2422558b74 100644 --- a/arch/arm/dts/zynqmp-zcu102-revB.dts +++ b/arch/arm/dts/zynqmp-zcu102-revB.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU102 RevB * - * (C) Copyright 2016 - 2018, Xilinx, Inc. + * (C) Copyright 2016 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts index 82557c88d2..3ceb39dce0 100644 --- a/arch/arm/dts/zynqmp-zcu104-revA.dts +++ b/arch/arm/dts/zynqmp-zcu104-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU104 * - * (C) Copyright 2017 - 2018, Xilinx, Inc. + * (C) Copyright 2017 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -209,19 +209,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts index e0e7dac010..7dad4523de 100644 --- a/arch/arm/dts/zynqmp-zcu104-revC.dts +++ b/arch/arm/dts/zynqmp-zcu104-revC.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU104 * - * (C) Copyright 2017 - 2018, Xilinx, Inc. + * (C) Copyright 2017 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -222,19 +222,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts index d31982fce7..221685fd23 100644 --- a/arch/arm/dts/zynqmp-zcu106-revA.dts +++ b/arch/arm/dts/zynqmp-zcu106-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU106 * - * (C) Copyright 2016, Xilinx, Inc. + * (C) Copyright 2016 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -612,19 +612,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; @@ -653,6 +653,10 @@ /* SD1 with level shifter */ &sdhci1 { status = "okay"; + /* + * This property should be removed for supporting UHS mode + */ + no-1-8-v; xlnx,mio_bank = <1>; }; diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts index bff224f78d..d16bf8ac7a 100644 --- a/arch/arm/dts/zynqmp-zcu111-revA.dts +++ b/arch/arm/dts/zynqmp-zcu111-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU111 * - * (C) Copyright 2017 - 2018, Xilinx, Inc. + * (C) Copyright 2017 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -525,19 +525,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; @@ -567,6 +567,10 @@ &sdhci1 { status = "okay"; disable-wp; + /* + * This property should be removed for supporting UHS mode + */ + no-1-8-v; xlnx,mio_bank = <1>; }; diff --git a/arch/arm/dts/zynqmp-zcu1275-revA.dts b/arch/arm/dts/zynqmp-zcu1275-revA.dts index c22de576a5..cdd5c34187 100644 --- a/arch/arm/dts/zynqmp-zcu1275-revA.dts +++ b/arch/arm/dts/zynqmp-zcu1275-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU1275 * - * (C) Copyright 2017 - 2018, Xilinx, Inc. + * (C) Copyright 2017 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * Siva Durga Prasad Paladugu <sivadur@xilinx.com> @@ -49,19 +49,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zcu1275-revB.dts b/arch/arm/dts/zynqmp-zcu1275-revB.dts index 2ec29b0b5d..430fc5adb4 100644 --- a/arch/arm/dts/zynqmp-zcu1275-revB.dts +++ b/arch/arm/dts/zynqmp-zcu1275-revB.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU1275 RevB * - * (C) Copyright 2018, Xilinx, Inc. + * (C) Copyright 2018 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * Siva Durga Prasad Paladugu <sivadur@xilinx.com> @@ -50,19 +50,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <1>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zcu1285-revA.dts b/arch/arm/dts/zynqmp-zcu1285-revA.dts index 9c18013138..d8b9cb1a9e 100644 --- a/arch/arm/dts/zynqmp-zcu1285-revA.dts +++ b/arch/arm/dts/zynqmp-zcu1285-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU1285 RevA * - * (C) Copyright 2018 - 2019, Xilinx, Inc. + * (C) Copyright 2018 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * Siva Durga Prasad Paladugu <sivadur@xilinx.com> @@ -241,5 +241,9 @@ &sdhci1 { status = "okay"; + /* + * This property should be removed for supporting UHS mode + */ + no-1-8-v; xlnx,mio_bank = <1>; }; diff --git a/arch/arm/dts/zynqmp-zcu208-revA.dts b/arch/arm/dts/zynqmp-zcu208-revA.dts index 9181060b89..75ecd7a5c2 100644 --- a/arch/arm/dts/zynqmp-zcu208-revA.dts +++ b/arch/arm/dts/zynqmp-zcu208-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU208 * - * (C) Copyright 2017 - 2019, Xilinx, Inc. + * (C) Copyright 2017 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -50,7 +50,7 @@ label = "sw19"; gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; linux,code = <KEY_DOWN>; - gpio-key,wakeup; + wakeup-source; autorepeat; }; }; @@ -563,6 +563,10 @@ &sdhci1 { status = "okay"; disable-wp; + /* + * This property should be removed for supporting UHS mode + */ + no-1-8-v; xlnx,mio_bank = <1>; }; diff --git a/arch/arm/dts/zynqmp-zcu216-revA.dts b/arch/arm/dts/zynqmp-zcu216-revA.dts index c294e1b51a..f3b5edfeb4 100644 --- a/arch/arm/dts/zynqmp-zcu216-revA.dts +++ b/arch/arm/dts/zynqmp-zcu216-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU216 * - * (C) Copyright 2017 - 2019, Xilinx, Inc. + * (C) Copyright 2017 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -50,7 +50,7 @@ label = "sw19"; gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; linux,code = <KEY_DOWN>; - gpio-key,wakeup; + wakeup-source; autorepeat; }; }; @@ -567,6 +567,10 @@ &sdhci1 { status = "okay"; disable-wp; + /* + * This property should be removed for supporting UHS mode + */ + no-1-8-v; xlnx,mio_bank = <1>; }; diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi index 9e7fae83f7..1634af0bd8 100644 --- a/arch/arm/dts/zynqmp.dtsi +++ b/arch/arm/dts/zynqmp.dtsi @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP * - * (C) Copyright 2014 - 2015, Xilinx, Inc. + * (C) Copyright 2014 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * @@ -149,6 +149,11 @@ #power-domain-cells = <0x1>; u-boot,dm-pre-reloc; + zynqmp_pcap: pcap { + compatible = "xlnx,zynqmp-pcap-fpga"; + clock-names = "ref_clk"; + }; + zynqmp_power: zynqmp-power { u-boot,dm-pre-reloc; compatible = "xlnx,zynqmp-power"; @@ -162,6 +167,11 @@ compatible = "xlnx,zynqmp-reset"; #reset-cells = <1>; }; + + pinctrl0: pinctrl { + compatible = "xlnx,zynqmp-pinctrl"; + status = "disabled"; + }; }; }; @@ -180,9 +190,10 @@ fpga_full: fpga-full { compatible = "fpga-region"; - fpga-mgr = <&pcap>; + fpga-mgr = <&zynqmp_pcap>; #address-cells = <2>; #size-cells = <2>; + ranges; }; nvmem_firmware { @@ -195,63 +206,6 @@ }; }; - pcap: pcap { - compatible = "xlnx,zynqmp-pcap-fpga"; - }; - - rst: reset-controller { - compatible = "xlnx,zynqmp-reset"; - #reset-cells = <1>; - }; - - xlnx_dp_snd_card: dp_snd_card { - compatible = "xlnx,dp-snd-card"; - status = "disabled"; - xlnx,dp-snd-pcm = <&xlnx_dp_snd_pcm0>, <&xlnx_dp_snd_pcm1>; - xlnx,dp-snd-codec = <&xlnx_dp_snd_codec0>; - }; - - xlnx_dp_snd_codec0: dp_snd_codec0 { - compatible = "xlnx,dp-snd-codec"; - status = "disabled"; - clock-names = "aud_clk"; - }; - - xlnx_dp_snd_pcm0: dp_snd_pcm0 { - compatible = "xlnx,dp-snd-pcm"; - status = "disabled"; - dmas = <&xlnx_dpdma 4>; - dma-names = "tx"; - }; - - xlnx_dp_snd_pcm1: dp_snd_pcm1 { - compatible = "xlnx,dp-snd-pcm"; - status = "disabled"; - dmas = <&xlnx_dpdma 5>; - dma-names = "tx"; - }; - - xilinx_drm: xilinx_drm { - compatible = "xlnx,drm"; - status = "disabled"; - xlnx,encoder-slave = <&xlnx_dp>; - xlnx,connector-type = "DisplayPort"; - xlnx,dp-sub = <&xlnx_dp_sub>; - planes { - xlnx,pixel-format = "rgb565"; - plane0 { - dmas = <&xlnx_dpdma 3>; - dma-names = "dma0"; - }; - plane1 { - dmas = <&xlnx_dpdma 0>, - <&xlnx_dpdma 1>, - <&xlnx_dpdma 2>; - dma-names = "dma0", "dma1", "dma2"; - }; - }; - }; - amba_apu: amba-apu@0 { compatible = "simple-bus"; #address-cells = <2>; @@ -259,7 +213,7 @@ ranges = <0 0 0 0 0xffffffff>; gic: interrupt-controller@f9010000 { - compatible = "arm,gic-400", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; #interrupt-cells = <3>; reg = <0x0 0xf9010000 0x10000>, <0x0 0xf9020000 0x20000>, @@ -794,6 +748,8 @@ power-domains = <&zynqmp_firmware PD_SD_0>; nvmem-cells = <&soc_revision>; nvmem-cell-names = "soc_revision"; + #clock-cells = <1>; + clock-output-names = "clk_out_sd0", "clk_in_sd0"; }; sdhci1: mmc@ff170000 { @@ -810,12 +766,8 @@ power-domains = <&zynqmp_firmware PD_SD_1>; nvmem-cells = <&soc_revision>; nvmem-cell-names = "soc_revision"; - }; - - pinctrl0: pinctrl@ff180000 { - compatible = "xlnx,pinctrl-zynqmp"; - status = "disabled"; - reg = <0x0 0xff180000 0x0 0x1000>; + #clock-cells = <1>; + clock-output-names = "clk_out_sd1", "clk_in_sd1"; }; smmu: smmu@fd800000 { @@ -1015,37 +967,6 @@ }; }; - xlnx_dp: dp@fd4a0000 { - compatible = "xlnx,v-dp"; - status = "disabled"; - reg = <0x0 0xfd4a0000 0x0 0x1000>; - interrupts = <0 119 4>; - interrupt-parent = <&gic>; - clock-names = "aclk", "aud_clk"; - xlnx,dp-version = "v1.2"; - xlnx,max-lanes = <2>; - xlnx,max-link-rate = <540000>; - xlnx,max-bpc = <16>; - xlnx,enable-ycrcb; - xlnx,colormetry = "rgb"; - xlnx,bpc = <8>; - xlnx,audio-chan = <2>; - xlnx,dp-sub = <&xlnx_dp_sub>; - xlnx,max-pclock-frequency = <300000>; - }; - - xlnx_dp_sub: dp_sub@fd4aa000 { - compatible = "xlnx,dp-sub"; - status = "disabled"; - reg = <0x0 0xfd4aa000 0x0 0x1000>, - <0x0 0xfd4ab000 0x0 0x1000>, - <0x0 0xfd4ac000 0x0 0x1000>; - reg-names = "blend", "av_buf", "aud"; - xlnx,output-fmt = "rgb"; - xlnx,vid-fmt = "yuyv"; - xlnx,gfx-fmt = "rgb565"; - }; - xlnx_dpdma: dma@fd4c0000 { compatible = "xlnx,dpdma"; status = "disabled"; @@ -1075,5 +996,62 @@ compatible = "xlnx,audio1"; }; }; + + zynqmp_dpsub: zynqmp-display@fd4a0000 { + compatible = "xlnx,zynqmp-dpsub-1.7"; + status = "disabled"; + reg = <0x0 0xfd4a0000 0x0 0x1000>, + <0x0 0xfd4aa000 0x0 0x1000>, + <0x0 0xfd4ab000 0x0 0x1000>, + <0x0 0xfd4ac000 0x0 0x1000>; + reg-names = "dp", "blend", "av_buf", "aud"; + interrupts = <0 119 4>; + interrupt-parent = <&gic>; + + clock-names = "dp_apb_clk", "dp_aud_clk", + "dp_vtc_pixel_clk_in"; + + power-domains = <&zynqmp_firmware PD_DP>; + + vid-layer { + dma-names = "vid0", "vid1", "vid2"; + dmas = <&xlnx_dpdma 0>, + <&xlnx_dpdma 1>, + <&xlnx_dpdma 2>; + }; + + gfx-layer { + dma-names = "gfx0"; + dmas = <&xlnx_dpdma 3>; + }; + + /* dummy node to indicate there's no child i2c device */ + i2c-bus { + }; + + zynqmp_dp_snd_codec0: zynqmp_dp_snd_codec0 { + compatible = "xlnx,dp-snd-codec"; + clock-names = "aud_clk"; + }; + + zynqmp_dp_snd_pcm0: zynqmp_dp_snd_pcm0 { + compatible = "xlnx,dp-snd-pcm"; + dmas = <&xlnx_dpdma 4>; + dma-names = "tx"; + }; + + zynqmp_dp_snd_pcm1: zynqmp_dp_snd_pcm1 { + compatible = "xlnx,dp-snd-pcm"; + dmas = <&xlnx_dpdma 5>; + dma-names = "tx"; + }; + + zynqmp_dp_snd_card0: zynqmp_dp_snd_card { + compatible = "xlnx,dp-snd-card"; + xlnx,dp-snd-pcm = <&zynqmp_dp_snd_pcm0>, + <&zynqmp_dp_snd_pcm1>; + xlnx,dp-snd-codec = <&zynqmp_dp_snd_codec0>; + }; + }; }; }; diff --git a/arch/arm/include/asm/arch-rockchip/vop_rk3288.h b/arch/arm/include/asm/arch-rockchip/vop_rk3288.h index 8398249509..872a158b71 100644 --- a/arch/arm/include/asm/arch-rockchip/vop_rk3288.h +++ b/arch/arm/include/asm/arch-rockchip/vop_rk3288.h @@ -85,6 +85,16 @@ enum { LB_RGB_1280X8 = 0x5 }; +#if defined(CONFIG_ROCKCHIP_RK3399) +enum vop_modes { + VOP_MODE_EDP = 0, + VOP_MODE_MIPI, + VOP_MODE_HDMI, + VOP_MODE_MIPI1, + VOP_MODE_DP, + VOP_MODE_NONE, +}; +#else enum vop_modes { VOP_MODE_EDP = 0, VOP_MODE_HDMI, @@ -94,6 +104,7 @@ enum vop_modes { VOP_MODE_AUTO_DETECT, VOP_MODE_UNKNOWN, }; +#endif /* VOP_VERSION_INFO */ #define M_FPGA_VERSION (0xffff << 16) diff --git a/arch/arm/include/asm/arch-tegra/tegra_mmc.h b/arch/arm/include/asm/arch-tegra/tegra_mmc.h index a2b6f63ff0..70dcf4aa66 100644 --- a/arch/arm/include/asm/arch-tegra/tegra_mmc.h +++ b/arch/arm/include/asm/arch-tegra/tegra_mmc.h @@ -2,7 +2,7 @@ /* * (C) Copyright 2009 SAMSUNG Electronics * Minkyu Kang <mk7.kang@samsung.com> - * Portions Copyright (C) 2011-2012 NVIDIA Corporation + * Portions Copyright (C) 2011-2012,2019 NVIDIA Corporation */ #ifndef __TEGRA_MMC_H_ @@ -52,7 +52,7 @@ struct tegra_mmc { unsigned char admaerr; /* offset 54h */ unsigned char res4[3]; /* RESERVED, offset 55h-57h */ unsigned long admaaddr; /* offset 58h-5Fh */ - unsigned char res5[0xa0]; /* RESERVED, offset 60h-FBh */ + unsigned char res5[0x9c]; /* RESERVED, offset 60h-FBh */ unsigned short slotintstatus; /* offset FCh */ unsigned short hcver; /* HOST Version */ unsigned int venclkctl; /* _VENDOR_CLOCK_CNTRL_0, 100h */ @@ -127,11 +127,23 @@ struct tegra_mmc { #define TEGRA_MMC_NORINTSIGEN_XFER_COMPLETE (1 << 1) -/* SDMMC1/3 settings from section 24.6 of T30 TRM */ +/* SDMMC1/3 settings from SDMMCx Initialization Sequence of TRM */ #define MEMCOMP_PADCTRL_VREF 7 -#define AUTO_CAL_ENABLED (1 << 29) +#define AUTO_CAL_ENABLE (1 << 29) +#define AUTO_CAL_ACTIVE (1 << 31) +#define AUTO_CAL_START (1 << 31) +#if defined(CONFIG_TEGRA210) +#define AUTO_CAL_PD_OFFSET (0x7D << 8) +#define AUTO_CAL_PU_OFFSET (0 << 0) +#define IO_TRIM_BYPASS_MASK (1 << 2) +#define TRIM_VAL_SHIFT 24 +#define TRIM_VAL_MASK (0x1F << TRIM_VAL_SHIFT) +#define TAP_VAL_SHIFT 16 +#define TAP_VAL_MASK (0xFF << TAP_VAL_SHIFT) +#else #define AUTO_CAL_PD_OFFSET (0x70 << 8) #define AUTO_CAL_PU_OFFSET (0x62 << 0) +#endif #endif /* __ASSEMBLY__ */ #endif /* __TEGRA_MMC_H_ */ diff --git a/arch/arm/include/asm/arch-tegra/xusb-padctl.h b/arch/arm/include/asm/arch-tegra/xusb-padctl.h index deccdf455d..7e14d8109d 100644 --- a/arch/arm/include/asm/arch-tegra/xusb-padctl.h +++ b/arch/arm/include/asm/arch-tegra/xusb-padctl.h @@ -16,6 +16,7 @@ struct tegra_xusb_phy; struct tegra_xusb_phy *tegra_xusb_phy_get(unsigned int type); void tegra_xusb_padctl_init(void); +void tegra_xusb_padctl_exit(void); int tegra_xusb_phy_prepare(struct tegra_xusb_phy *phy); int tegra_xusb_phy_enable(struct tegra_xusb_phy *phy); int tegra_xusb_phy_disable(struct tegra_xusb_phy *phy); diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h index 84e5cb46e5..333e407b66 100644 --- a/arch/arm/include/asm/gpio.h +++ b/arch/arm/include/asm/gpio.h @@ -4,7 +4,8 @@ !defined(CONFIG_ARCH_ROCKCHIP) && !defined(CONFIG_ARCH_LX2160A) && \ !defined(CONFIG_ARCH_LS1028A) && !defined(CONFIG_ARCH_LS2080A) && \ !defined(CONFIG_ARCH_LS1088A) && !defined(CONFIG_ARCH_ASPEED) && \ - !defined(CONFIG_ARCH_LS1012A) && !defined(CONFIG_ARCH_U8500) && \ + !defined(CONFIG_ARCH_LS1012A) && !defined(CONFIG_ARCH_LS1043A) && \ + !defined(CONFIG_ARCH_LS1046A) && !defined(CONFIG_ARCH_U8500) && \ !defined(CONFIG_CORTINA_PLATFORM) #include <asm/arch/gpio.h> #endif diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index ed7514ab75..0cb1f23d0f 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -229,6 +229,7 @@ config ROCKCHIP_RK3399 select DM_PMIC select DM_REGULATOR_FIXED select BOARD_LATE_INIT + imply PRE_CONSOLE_BUFFER imply ROCKCHIP_COMMON_BOARD imply ROCKCHIP_SDRAM_COMMON imply SPL_ROCKCHIP_COMMON_BOARD diff --git a/arch/arm/mach-snapdragon/misc.c b/arch/arm/mach-snapdragon/misc.c index f6c87866c0..aaa561c2c6 100644 --- a/arch/arm/mach-snapdragon/misc.c +++ b/arch/arm/mach-snapdragon/misc.c @@ -41,7 +41,7 @@ void msm_generate_mac_addr(u8 *mac) int i; char sn[9]; - snprintf(sn, 8, "%08x", msm_board_serial()); + snprintf(sn, 9, "%08x", msm_board_serial()); /* fill in the mac with serialno, use locally adminstrated pool */ mac[0] = 0x02; diff --git a/arch/arm/mach-socfpga/include/mach/base_addr_a10.h b/arch/arm/mach-socfpga/include/mach/base_addr_a10.h index 929c413e03..b947cc0729 100644 --- a/arch/arm/mach-socfpga/include/mach/base_addr_a10.h +++ b/arch/arm/mach-socfpga/include/mach/base_addr_a10.h @@ -47,4 +47,6 @@ #define SOCFPGA_SDR_FIREWALL_L3_ADDRESS 0xffd13400 #define SOCFPGA_NOC_FW_H2F_SCR_OFST 0xffd13500 +#define SOCFPGA_PHYS_OCRAM_SIZE 0x40000 + #endif /* _SOCFPGA_A10_BASE_HARDWARE_H_ */ diff --git a/arch/arm/mach-socfpga/include/mach/base_addr_ac5.h b/arch/arm/mach-socfpga/include/mach/base_addr_ac5.h index 2725e9fcc3..da966fb458 100644 --- a/arch/arm/mach-socfpga/include/mach/base_addr_ac5.h +++ b/arch/arm/mach-socfpga/include/mach/base_addr_ac5.h @@ -59,4 +59,6 @@ #define SOCFPGA_DMANONSECURE_ADDRESS 0xffe00000 #define SOCFPGA_DMASECURE_ADDRESS 0xffe01000 +#define SOCFPGA_PHYS_OCRAM_SIZE 0x10000 + #endif /* _SOCFPGA_BASE_ADDRS_H_ */ diff --git a/arch/arm/mach-socfpga/spl_a10.c b/arch/arm/mach-socfpga/spl_a10.c index d9ef851054..b10be33268 100644 --- a/arch/arm/mach-socfpga/spl_a10.c +++ b/arch/arm/mach-socfpga/spl_a10.c @@ -33,6 +33,38 @@ DECLARE_GLOBAL_DATA_PTR; +#define BOOTROM_SHARED_MEM_SIZE 0x800 /* 2KB */ +#define BOOTROM_SHARED_MEM_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + SOCFPGA_PHYS_OCRAM_SIZE - \ + BOOTROM_SHARED_MEM_SIZE) +#define RST_STATUS_SHARED_ADDR (BOOTROM_SHARED_MEM_ADDR + 0x438) +static u32 rst_mgr_status __section(.data); + +/* + * Bootrom will clear the status register in reset manager and stores the + * reset status value in shared memory. Bootrom stores shared data at last + * 2KB of onchip RAM. + * This function save reset status provided by BootROM to rst_mgr_status. + * More information about reset status register value can be found in reset + * manager register description. + * When running in debugger without Bootrom, r0 to r3 are random values. + * So, skip save the value when r0 is not BootROM shared data address. + * + * r0 - Contains the pointer to the shared memory block. The shared + * memory block is located in the top 2 KB of on-chip RAM. + * r1 - contains the length of the shared memory. + * r2 - unused and set to 0x0. + * r3 - points to the version block. + */ +void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2, + unsigned long r3) +{ + if (r0 == BOOTROM_SHARED_MEM_ADDR) + rst_mgr_status = readl(RST_STATUS_SHARED_ADDR); + + save_boot_params_ret(); +} + u32 spl_boot_device(void) { const u32 bsel = readl(socfpga_get_sysmgr_addr() + SYSMGR_A10_BOOTINFO); diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 3a3b673430..be0822bfb7 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -994,7 +994,7 @@ config SPL_STACK_R_ADDR config SPL_SPI_SUNXI bool "Support for SPI Flash on Allwinner SoCs in SPL" - depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I + depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || MACH_SUN50I_H6 help Enable support for SPI Flash. This option allows SPL to read from sunxi SPI Flash. It uses the same method as the boot ROM, so does diff --git a/arch/arm/mach-sunxi/spl_spi_sunxi.c b/arch/arm/mach-sunxi/spl_spi_sunxi.c index 043d9f6ead..a3997b2590 100644 --- a/arch/arm/mach-sunxi/spl_spi_sunxi.c +++ b/arch/arm/mach-sunxi/spl_spi_sunxi.c @@ -36,13 +36,13 @@ /* SUN4I variant of the SPI controller */ /*****************************************************************************/ -#define SUN4I_SPI0_CCTL (0x01C05000 + 0x1C) -#define SUN4I_SPI0_CTL (0x01C05000 + 0x08) -#define SUN4I_SPI0_RX (0x01C05000 + 0x00) -#define SUN4I_SPI0_TX (0x01C05000 + 0x04) -#define SUN4I_SPI0_FIFO_STA (0x01C05000 + 0x28) -#define SUN4I_SPI0_BC (0x01C05000 + 0x20) -#define SUN4I_SPI0_TC (0x01C05000 + 0x24) +#define SUN4I_SPI0_CCTL 0x1C +#define SUN4I_SPI0_CTL 0x08 +#define SUN4I_SPI0_RX 0x00 +#define SUN4I_SPI0_TX 0x04 +#define SUN4I_SPI0_FIFO_STA 0x28 +#define SUN4I_SPI0_BC 0x20 +#define SUN4I_SPI0_TC 0x24 #define SUN4I_CTL_ENABLE BIT(0) #define SUN4I_CTL_MASTER BIT(1) @@ -54,15 +54,15 @@ /* SUN6I variant of the SPI controller */ /*****************************************************************************/ -#define SUN6I_SPI0_CCTL (0x01C68000 + 0x24) -#define SUN6I_SPI0_GCR (0x01C68000 + 0x04) -#define SUN6I_SPI0_TCR (0x01C68000 + 0x08) -#define SUN6I_SPI0_FIFO_STA (0x01C68000 + 0x1C) -#define SUN6I_SPI0_MBC (0x01C68000 + 0x30) -#define SUN6I_SPI0_MTC (0x01C68000 + 0x34) -#define SUN6I_SPI0_BCC (0x01C68000 + 0x38) -#define SUN6I_SPI0_TXD (0x01C68000 + 0x200) -#define SUN6I_SPI0_RXD (0x01C68000 + 0x300) +#define SUN6I_SPI0_CCTL 0x24 +#define SUN6I_SPI0_GCR 0x04 +#define SUN6I_SPI0_TCR 0x08 +#define SUN6I_SPI0_FIFO_STA 0x1C +#define SUN6I_SPI0_MBC 0x30 +#define SUN6I_SPI0_MTC 0x34 +#define SUN6I_SPI0_BCC 0x38 +#define SUN6I_SPI0_TXD 0x200 +#define SUN6I_SPI0_RXD 0x300 #define SUN6I_CTL_ENABLE BIT(0) #define SUN6I_CTL_MASTER BIT(1) @@ -72,7 +72,12 @@ /*****************************************************************************/ #define CCM_AHB_GATING0 (0x01C20000 + 0x60) +#define CCM_H6_SPI_BGR_REG (0x03001000 + 0x96c) +#ifdef CONFIG_MACH_SUN50I_H6 +#define CCM_SPI0_CLK (0x03001000 + 0x940) +#else #define CCM_SPI0_CLK (0x01C20000 + 0xA0) +#endif #define SUN6I_BUS_SOFT_RST_REG0 (0x01C20000 + 0x2C0) #define AHB_RESET_SPI0_SHIFT 20 @@ -86,74 +91,111 @@ /* * Allwinner A10/A20 SoCs were using pins PC0,PC1,PC2,PC23 for booting * from SPI Flash, everything else is using pins PC0,PC1,PC2,PC3. + * The H6 uses PC0, PC2, PC3, PC5. */ static void spi0_pinmux_setup(unsigned int pin_function) { - unsigned int pin; + /* All chips use PC0 and PC2. */ + sunxi_gpio_set_cfgpin(SUNXI_GPC(0), pin_function); + sunxi_gpio_set_cfgpin(SUNXI_GPC(2), pin_function); - for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(2); pin++) - sunxi_gpio_set_cfgpin(pin, pin_function); + /* All chips except H6 use PC1, and only H6 uses PC5. */ + if (!IS_ENABLED(CONFIG_MACH_SUN50I_H6)) + sunxi_gpio_set_cfgpin(SUNXI_GPC(1), pin_function); + else + sunxi_gpio_set_cfgpin(SUNXI_GPC(5), pin_function); - if (IS_ENABLED(CONFIG_MACH_SUN4I) || IS_ENABLED(CONFIG_MACH_SUN7I)) + /* Older generations use PC23 for CS, newer ones use PC3. */ + if (IS_ENABLED(CONFIG_MACH_SUN4I) || IS_ENABLED(CONFIG_MACH_SUN7I) || + IS_ENABLED(CONFIG_MACH_SUN8I_R40)) sunxi_gpio_set_cfgpin(SUNXI_GPC(23), pin_function); else sunxi_gpio_set_cfgpin(SUNXI_GPC(3), pin_function); } +static bool is_sun6i_gen_spi(void) +{ + return IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I) || + IS_ENABLED(CONFIG_MACH_SUN50I_H6); +} + +static uintptr_t spi0_base_address(void) +{ + if (IS_ENABLED(CONFIG_MACH_SUN8I_R40)) + return 0x01C05000; + + if (IS_ENABLED(CONFIG_MACH_SUN50I_H6)) + return 0x05010000; + + if (!is_sun6i_gen_spi()) + return 0x01C05000; + + return 0x01C68000; +} + /* * Setup 6 MHz from OSC24M (because the BROM is doing the same). */ static void spi0_enable_clock(void) { + uintptr_t base = spi0_base_address(); + /* Deassert SPI0 reset on SUN6I */ - if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) + if (IS_ENABLED(CONFIG_MACH_SUN50I_H6)) + setbits_le32(CCM_H6_SPI_BGR_REG, (1U << 16) | 0x1); + else if (is_sun6i_gen_spi()) setbits_le32(SUN6I_BUS_SOFT_RST_REG0, (1 << AHB_RESET_SPI0_SHIFT)); /* Open the SPI0 gate */ - setbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0)); + if (!IS_ENABLED(CONFIG_MACH_SUN50I_H6)) + setbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0)); /* Divide by 4 */ - writel(SPI0_CLK_DIV_BY_4, IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I) ? - SUN6I_SPI0_CCTL : SUN4I_SPI0_CCTL); + writel(SPI0_CLK_DIV_BY_4, base + (is_sun6i_gen_spi() ? + SUN6I_SPI0_CCTL : SUN4I_SPI0_CCTL)); /* 24MHz from OSC24M */ writel((1 << 31), CCM_SPI0_CLK); - if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) { + if (is_sun6i_gen_spi()) { /* Enable SPI in the master mode and do a soft reset */ - setbits_le32(SUN6I_SPI0_GCR, SUN6I_CTL_MASTER | - SUN6I_CTL_ENABLE | - SUN6I_CTL_SRST); + setbits_le32(base + SUN6I_SPI0_GCR, SUN6I_CTL_MASTER | + SUN6I_CTL_ENABLE | SUN6I_CTL_SRST); /* Wait for completion */ - while (readl(SUN6I_SPI0_GCR) & SUN6I_CTL_SRST) + while (readl(base + SUN6I_SPI0_GCR) & SUN6I_CTL_SRST) ; } else { /* Enable SPI in the master mode and reset FIFO */ - setbits_le32(SUN4I_SPI0_CTL, SUN4I_CTL_MASTER | - SUN4I_CTL_ENABLE | - SUN4I_CTL_TF_RST | - SUN4I_CTL_RF_RST); + setbits_le32(base + SUN4I_SPI0_CTL, SUN4I_CTL_MASTER | + SUN4I_CTL_ENABLE | + SUN4I_CTL_TF_RST | + SUN4I_CTL_RF_RST); } } static void spi0_disable_clock(void) { + uintptr_t base = spi0_base_address(); + /* Disable the SPI0 controller */ - if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) - clrbits_le32(SUN6I_SPI0_GCR, SUN6I_CTL_MASTER | + if (is_sun6i_gen_spi()) + clrbits_le32(base + SUN6I_SPI0_GCR, SUN6I_CTL_MASTER | SUN6I_CTL_ENABLE); else - clrbits_le32(SUN4I_SPI0_CTL, SUN4I_CTL_MASTER | + clrbits_le32(base + SUN4I_SPI0_CTL, SUN4I_CTL_MASTER | SUN4I_CTL_ENABLE); /* Disable the SPI0 clock */ writel(0, CCM_SPI0_CLK); /* Close the SPI0 gate */ - clrbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0)); + if (!IS_ENABLED(CONFIG_MACH_SUN50I_H6)) + clrbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0)); /* Assert SPI0 reset on SUN6I */ - if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) + if (IS_ENABLED(CONFIG_MACH_SUN50I_H6)) + clrbits_le32(CCM_H6_SPI_BGR_REG, (1U << 16) | 0x1); + else if (is_sun6i_gen_spi()) clrbits_le32(SUN6I_BUS_SOFT_RST_REG0, (1 << AHB_RESET_SPI0_SHIFT)); } @@ -162,7 +204,8 @@ static void spi0_init(void) { unsigned int pin_function = SUNXI_GPC_SPI0; - if (IS_ENABLED(CONFIG_MACH_SUN50I)) + if (IS_ENABLED(CONFIG_MACH_SUN50I) || + IS_ENABLED(CONFIG_MACH_SUN50I_H6)) pin_function = SUN50I_GPC_SPI0; spi0_pinmux_setup(pin_function); @@ -173,7 +216,8 @@ static void spi0_deinit(void) { /* New SoCs can disable pins, older could only set them as input */ unsigned int pin_function = SUNXI_GPIO_INPUT; - if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) + + if (is_sun6i_gen_spi()) pin_function = SUNXI_GPIO_DISABLE; spi0_disable_clock(); @@ -227,31 +271,32 @@ static void spi0_read_data(void *buf, u32 addr, u32 len) { u8 *buf8 = buf; u32 chunk_len; + uintptr_t base = spi0_base_address(); while (len > 0) { chunk_len = len; if (chunk_len > SPI_READ_MAX_SIZE) chunk_len = SPI_READ_MAX_SIZE; - if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) { + if (is_sun6i_gen_spi()) { sunxi_spi0_read_data(buf8, addr, chunk_len, - SUN6I_SPI0_TCR, + base + SUN6I_SPI0_TCR, SUN6I_TCR_XCH, - SUN6I_SPI0_FIFO_STA, - SUN6I_SPI0_TXD, - SUN6I_SPI0_RXD, - SUN6I_SPI0_MBC, - SUN6I_SPI0_MTC, - SUN6I_SPI0_BCC); + base + SUN6I_SPI0_FIFO_STA, + base + SUN6I_SPI0_TXD, + base + SUN6I_SPI0_RXD, + base + SUN6I_SPI0_MBC, + base + SUN6I_SPI0_MTC, + base + SUN6I_SPI0_BCC); } else { sunxi_spi0_read_data(buf8, addr, chunk_len, - SUN4I_SPI0_CTL, + base + SUN4I_SPI0_CTL, SUN4I_CTL_XCH, - SUN4I_SPI0_FIFO_STA, - SUN4I_SPI0_TX, - SUN4I_SPI0_RX, - SUN4I_SPI0_BC, - SUN4I_SPI0_TC, + base + SUN4I_SPI0_FIFO_STA, + base + SUN4I_SPI0_TX, + base + SUN4I_SPI0_RX, + base + SUN4I_SPI0_BC, + base + SUN4I_SPI0_TC, 0); } diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c index d3497a2673..224efc97c5 100644 --- a/arch/arm/mach-tegra/board2.c +++ b/arch/arm/mach-tegra/board2.c @@ -181,6 +181,12 @@ int board_init(void) return nvidia_board_init(); } +void board_cleanup_before_linux(void) +{ + /* power down UPHY PLL */ + tegra_xusb_padctl_exit(); +} + #ifdef CONFIG_BOARD_EARLY_INIT_F static void __gpio_early_init(void) { @@ -211,6 +217,31 @@ int board_early_init_f(void) arch_timer_init(); #endif +#if defined(CONFIG_DISABLE_SDMMC1_EARLY) + /* + * Turn off (reset/disable) SDMMC1 on Nano here, before GPIO INIT. + * We do this because earlier bootloaders have enabled power to + * SDMMC1 on Nano, and toggling power-gpio (PZ3) in pinmux_init() + * results in power being back-driven into the SD-card and SDMMC1 + * HW, which is 'bad' as per the HW team. + * + * From the HW team: "LDO2 from the PMIC has already been set to 3.3v in + * nvtboot/CBoot on Nano (for SD-card boot). So when U-Boot's GPIO_INIT + * table sets PZ3 to OUT0 as per the pinmux spreadsheet, it turns off + * the loadswitch. When PZ3 is 0 and not driving, essentially the SDCard + * voltage turns off. Since the SDCard voltage is no longer there, the + * SDMMC CLK/DAT lines are backdriving into what essentially is a + * powered-off SDCard, that's why the voltage drops from 3.3V to ~1.6V" + * + * Note that this can probably be removed when we change over to storing + * all BL components on QSPI on Nano, and U-Boot then becomes the first + * one to turn on SDMMC1 power. Another fix would be to have CBoot + * disable power/gate SDMMC1 off before handing off to U-Boot/kernel. + */ + reset_set_enable(PERIPH_ID_SDMMC1, 1); + clock_set_enable(PERIPH_ID_SDMMC1, 0); +#endif /* CONFIG_DISABLE_SDMMC1_EARLY */ + pinmux_init(); board_init_uart_f(); diff --git a/arch/arm/mach-tegra/tegra210/Kconfig b/arch/arm/mach-tegra/tegra210/Kconfig index 3637473051..97ed8e05f4 100644 --- a/arch/arm/mach-tegra/tegra210/Kconfig +++ b/arch/arm/mach-tegra/tegra210/Kconfig @@ -35,6 +35,12 @@ config TARGET_P2571 help P2571 is a P2530 married to a P1963 I/O board +config TARGET_P3450_0000 + bool "NVIDIA Jetson Nano Developer Kit" + select BOARD_LATE_INIT + help + P3450-0000 is a P3448 CPU board married to a P3449 I/O board. + endchoice config SYS_SOC @@ -44,5 +50,6 @@ source "board/nvidia/e2220-1170/Kconfig" source "board/nvidia/p2371-0000/Kconfig" source "board/nvidia/p2371-2180/Kconfig" source "board/nvidia/p2571/Kconfig" +source "board/nvidia/p3450-0000/Kconfig" endif diff --git a/arch/arm/mach-tegra/tegra210/Makefile b/arch/arm/mach-tegra/tegra210/Makefile index b6012fc7ba..cfcba5b68f 100644 --- a/arch/arm/mach-tegra/tegra210/Makefile +++ b/arch/arm/mach-tegra/tegra210/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2013-2015 +# (C) Copyright 2013-2020 # NVIDIA Corporation <www.nvidia.com> # # SPDX-License-Identifier: GPL-2.0+ @@ -7,6 +7,5 @@ obj-y += clock.o obj-y += funcmux.o -obj-y += pinmux.o obj-y += xusb-padctl.o obj-y += ../xusb-padctl-common.o diff --git a/arch/arm/mach-tegra/tegra210/clock.c b/arch/arm/mach-tegra/tegra210/clock.c index b240860f08..00c65c281f 100644 --- a/arch/arm/mach-tegra/tegra210/clock.c +++ b/arch/arm/mach-tegra/tegra210/clock.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * (C) Copyright 2013-2015 + * (C) Copyright 2013-2020 * NVIDIA Corporation <www.nvidia.com> */ @@ -333,7 +333,7 @@ static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = { TYPE(PERIPHC_DMIC3, CLOCK_TYPE_NONE), TYPE(PERIPHC_APE, CLOCK_TYPE_NONE), TYPE(PERIPHC_QSPI, CLOCK_TYPE_PC01C00_C42C41TC40), - TYPE(PERIPHC_VI_I2C, CLOCK_TYPE_NONE), + TYPE(PERIPHC_VI_I2C, CLOCK_TYPE_PC2CC3M_T16), TYPE(PERIPHC_USB2_HSIC_TRK, CLOCK_TYPE_NONE), TYPE(PERIPHC_PEX_SATA_USB_RX_BYP, CLOCK_TYPE_NONE), @@ -739,7 +739,7 @@ int get_periph_clock_info(enum periph_id periph_id, int *mux_bits, if (!clock_periph_id_isvalid(periph_id)) return -1; - internal_id = periph_id_to_internal_id[periph_id]; + internal_id = INTERNAL_ID(periph_id_to_internal_id[periph_id]); if (!periphc_internal_id_isvalid(internal_id)) return -1; @@ -765,7 +765,7 @@ enum clock_id get_periph_clock_id(enum periph_id periph_id, int source) if (!clock_periph_id_isvalid(periph_id)) return CLOCK_ID_NONE; - internal_id = periph_id_to_internal_id[periph_id]; + internal_id = INTERNAL_ID(periph_id_to_internal_id[periph_id]); if (!periphc_internal_id_isvalid(internal_id)) return CLOCK_ID_NONE; @@ -1235,25 +1235,6 @@ int tegra_plle_enable(void) value &= ~PLLE_SS_CNTL_INTERP_RESET; writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); - /* 7. Enable HW power sequencer for PLLE */ - - value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC); - value &= ~PLLE_MISC_IDDQ_SWCTL; - writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC); - - value = readl(NV_PA_CLK_RST_BASE + PLLE_AUX); - value &= ~PLLE_AUX_SS_SWCTL; - value &= ~PLLE_AUX_ENABLE_SWCTL; - value |= PLLE_AUX_SS_SEQ_INCLUDE; - value |= PLLE_AUX_USE_LOCKDET; - writel(value, NV_PA_CLK_RST_BASE + PLLE_AUX); - - /* 8. Wait 1 us */ - - udelay(1); - value |= PLLE_AUX_SEQ_ENABLE; - writel(value, NV_PA_CLK_RST_BASE + PLLE_AUX); - return 0; } diff --git a/arch/arm/mach-tegra/tegra210/pinmux.c b/arch/arm/mach-tegra/tegra210/pinmux.c deleted file mode 100644 index 615809990b..0000000000 --- a/arch/arm/mach-tegra/tegra210/pinmux.c +++ /dev/null @@ -1,194 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved. - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/pinmux.h> - -#define PIN(pin, f0, f1, f2, f3) \ - { \ - .funcs = { \ - PMUX_FUNC_##f0, \ - PMUX_FUNC_##f1, \ - PMUX_FUNC_##f2, \ - PMUX_FUNC_##f3, \ - }, \ - } - -#define PIN_RESERVED {} - -static const struct pmux_pingrp_desc tegra210_pingroups[] = { - /* pin, f0, f1, f2, f3 */ - /* Offset 0x3000 */ - PIN(SDMMC1_CLK_PM0, SDMMC1, RSVD1, RSVD2, RSVD3), - PIN(SDMMC1_CMD_PM1, SDMMC1, SPI3, RSVD2, RSVD3), - PIN(SDMMC1_DAT3_PM2, SDMMC1, SPI3, RSVD2, RSVD3), - PIN(SDMMC1_DAT2_PM3, SDMMC1, SPI3, RSVD2, RSVD3), - PIN(SDMMC1_DAT1_PM4, SDMMC1, SPI3, RSVD2, RSVD3), - PIN(SDMMC1_DAT0_PM5, SDMMC1, RSVD1, RSVD2, RSVD3), - PIN_RESERVED, - /* Offset 0x301c */ - PIN(SDMMC3_CLK_PP0, SDMMC3, RSVD1, RSVD2, RSVD3), - PIN(SDMMC3_CMD_PP1, SDMMC3, RSVD1, RSVD2, RSVD3), - PIN(SDMMC3_DAT0_PP5, SDMMC3, RSVD1, RSVD2, RSVD3), - PIN(SDMMC3_DAT1_PP4, SDMMC3, RSVD1, RSVD2, RSVD3), - PIN(SDMMC3_DAT2_PP3, SDMMC3, RSVD1, RSVD2, RSVD3), - PIN(SDMMC3_DAT3_PP2, SDMMC3, RSVD1, RSVD2, RSVD3), - PIN_RESERVED, - /* Offset 0x3038 */ - PIN(PEX_L0_RST_N_PA0, PE0, RSVD1, RSVD2, RSVD3), - PIN(PEX_L0_CLKREQ_N_PA1, PE0, RSVD1, RSVD2, RSVD3), - PIN(PEX_WAKE_N_PA2, PE, RSVD1, RSVD2, RSVD3), - PIN(PEX_L1_RST_N_PA3, PE1, RSVD1, RSVD2, RSVD3), - PIN(PEX_L1_CLKREQ_N_PA4, PE1, RSVD1, RSVD2, RSVD3), - PIN(SATA_LED_ACTIVE_PA5, SATA, RSVD1, RSVD2, RSVD3), - PIN(SPI1_MOSI_PC0, SPI1, RSVD1, RSVD2, RSVD3), - PIN(SPI1_MISO_PC1, SPI1, RSVD1, RSVD2, RSVD3), - PIN(SPI1_SCK_PC2, SPI1, RSVD1, RSVD2, RSVD3), - PIN(SPI1_CS0_PC3, SPI1, RSVD1, RSVD2, RSVD3), - PIN(SPI1_CS1_PC4, SPI1, RSVD1, RSVD2, RSVD3), - PIN(SPI2_MOSI_PB4, SPI2, DTV, RSVD2, RSVD3), - PIN(SPI2_MISO_PB5, SPI2, DTV, RSVD2, RSVD3), - PIN(SPI2_SCK_PB6, SPI2, DTV, RSVD2, RSVD3), - PIN(SPI2_CS0_PB7, SPI2, DTV, RSVD2, RSVD3), - PIN(SPI2_CS1_PDD0, SPI2, RSVD1, RSVD2, RSVD3), - PIN(SPI4_MOSI_PC7, SPI4, RSVD1, RSVD2, RSVD3), - PIN(SPI4_MISO_PD0, SPI4, RSVD1, RSVD2, RSVD3), - PIN(SPI4_SCK_PC5, SPI4, RSVD1, RSVD2, RSVD3), - PIN(SPI4_CS0_PC6, SPI4, RSVD1, RSVD2, RSVD3), - PIN(QSPI_SCK_PEE0, QSPI, RSVD1, RSVD2, RSVD3), - PIN(QSPI_CS_N_PEE1, QSPI, RSVD1, RSVD2, RSVD3), - PIN(QSPI_IO0_PEE2, QSPI, RSVD1, RSVD2, RSVD3), - PIN(QSPI_IO1_PEE3, QSPI, RSVD1, RSVD2, RSVD3), - PIN(QSPI_IO2_PEE4, QSPI, RSVD1, RSVD2, RSVD3), - PIN(QSPI_IO3_PEE5, QSPI, RSVD1, RSVD2, RSVD3), - PIN_RESERVED, - /* Offset 0x30a4 */ - PIN(DMIC1_CLK_PE0, DMIC1, I2S3, RSVD2, RSVD3), - PIN(DMIC1_DAT_PE1, DMIC1, I2S3, RSVD2, RSVD3), - PIN(DMIC2_CLK_PE2, DMIC2, I2S3, RSVD2, RSVD3), - PIN(DMIC2_DAT_PE3, DMIC2, I2S3, RSVD2, RSVD3), - PIN(DMIC3_CLK_PE4, DMIC3, I2S5A, RSVD2, RSVD3), - PIN(DMIC3_DAT_PE5, DMIC3, I2S5A, RSVD2, RSVD3), - PIN(GEN1_I2C_SCL_PJ1, I2C1, RSVD1, RSVD2, RSVD3), - PIN(GEN1_I2C_SDA_PJ0, I2C1, RSVD1, RSVD2, RSVD3), - PIN(GEN2_I2C_SCL_PJ2, I2C2, RSVD1, RSVD2, RSVD3), - PIN(GEN2_I2C_SDA_PJ3, I2C2, RSVD1, RSVD2, RSVD3), - PIN(GEN3_I2C_SCL_PF0, I2C3, RSVD1, RSVD2, RSVD3), - PIN(GEN3_I2C_SDA_PF1, I2C3, RSVD1, RSVD2, RSVD3), - PIN(CAM_I2C_SCL_PS2, I2C3, I2CVI, RSVD2, RSVD3), - PIN(CAM_I2C_SDA_PS3, I2C3, I2CVI, RSVD2, RSVD3), - PIN(PWR_I2C_SCL_PY3, I2CPMU, RSVD1, RSVD2, RSVD3), - PIN(PWR_I2C_SDA_PY4, I2CPMU, RSVD1, RSVD2, RSVD3), - PIN(UART1_TX_PU0, UARTA, RSVD1, RSVD2, RSVD3), - PIN(UART1_RX_PU1, UARTA, RSVD1, RSVD2, RSVD3), - PIN(UART1_RTS_PU2, UARTA, RSVD1, RSVD2, RSVD3), - PIN(UART1_CTS_PU3, UARTA, RSVD1, RSVD2, RSVD3), - PIN(UART2_TX_PG0, UARTB, I2S4A, SPDIF, UART), - PIN(UART2_RX_PG1, UARTB, I2S4A, SPDIF, UART), - PIN(UART2_RTS_PG2, UARTB, I2S4A, RSVD2, UART), - PIN(UART2_CTS_PG3, UARTB, I2S4A, RSVD2, UART), - PIN(UART3_TX_PD1, UARTC, SPI4, RSVD2, RSVD3), - PIN(UART3_RX_PD2, UARTC, SPI4, RSVD2, RSVD3), - PIN(UART3_RTS_PD3, UARTC, SPI4, RSVD2, RSVD3), - PIN(UART3_CTS_PD4, UARTC, SPI4, RSVD2, RSVD3), - PIN(UART4_TX_PI4, UARTD, UART, RSVD2, RSVD3), - PIN(UART4_RX_PI5, UARTD, UART, RSVD2, RSVD3), - PIN(UART4_RTS_PI6, UARTD, UART, RSVD2, RSVD3), - PIN(UART4_CTS_PI7, UARTD, UART, RSVD2, RSVD3), - PIN(DAP1_FS_PB0, I2S1, RSVD1, RSVD2, RSVD3), - PIN(DAP1_DIN_PB1, I2S1, RSVD1, RSVD2, RSVD3), - PIN(DAP1_DOUT_PB2, I2S1, RSVD1, RSVD2, RSVD3), - PIN(DAP1_SCLK_PB3, I2S1, RSVD1, RSVD2, RSVD3), - PIN(DAP2_FS_PAA0, I2S2, RSVD1, RSVD2, RSVD3), - PIN(DAP2_DIN_PAA2, I2S2, RSVD1, RSVD2, RSVD3), - PIN(DAP2_DOUT_PAA3, I2S2, RSVD1, RSVD2, RSVD3), - PIN(DAP2_SCLK_PAA1, I2S2, RSVD1, RSVD2, RSVD3), - PIN(DAP4_FS_PJ4, I2S4B, RSVD1, RSVD2, RSVD3), - PIN(DAP4_DIN_PJ5, I2S4B, RSVD1, RSVD2, RSVD3), - PIN(DAP4_DOUT_PJ6, I2S4B, RSVD1, RSVD2, RSVD3), - PIN(DAP4_SCLK_PJ7, I2S4B, RSVD1, RSVD2, RSVD3), - PIN(CAM1_MCLK_PS0, EXTPERIPH3, RSVD1, RSVD2, RSVD3), - PIN(CAM2_MCLK_PS1, EXTPERIPH3, RSVD1, RSVD2, RSVD3), - PIN(JTAG_RTCK, JTAG, RSVD1, RSVD2, RSVD3), - PIN(CLK_32K_IN, CLK, RSVD1, RSVD2, RSVD3), - PIN(CLK_32K_OUT_PY5, SOC, BLINK, RSVD2, RSVD3), - PIN(BATT_BCL, BCL, RSVD1, RSVD2, RSVD3), - PIN(CLK_REQ, SYS, RSVD1, RSVD2, RSVD3), - PIN(CPU_PWR_REQ, CPU, RSVD1, RSVD2, RSVD3), - PIN(PWR_INT_N, PMI, RSVD1, RSVD2, RSVD3), - PIN(SHUTDOWN, SHUTDOWN, RSVD1, RSVD2, RSVD3), - PIN(CORE_PWR_REQ, CORE, RSVD1, RSVD2, RSVD3), - PIN(AUD_MCLK_PBB0, AUD, RSVD1, RSVD2, RSVD3), - PIN(DVFS_PWM_PBB1, RSVD0, CLDVFS, SPI3, RSVD3), - PIN(DVFS_CLK_PBB2, RSVD0, CLDVFS, SPI3, RSVD3), - PIN(GPIO_X1_AUD_PBB3, RSVD0, RSVD1, SPI3, RSVD3), - PIN(GPIO_X3_AUD_PBB4, RSVD0, RSVD1, SPI3, RSVD3), - PIN(PCC7, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(HDMI_CEC_PCC0, CEC, RSVD1, RSVD2, RSVD3), - PIN(HDMI_INT_DP_HPD_PCC1, DP, RSVD1, RSVD2, RSVD3), - PIN(SPDIF_OUT_PCC2, SPDIF, RSVD1, RSVD2, RSVD3), - PIN(SPDIF_IN_PCC3, SPDIF, RSVD1, RSVD2, RSVD3), - PIN(USB_VBUS_EN0_PCC4, USB, RSVD1, RSVD2, RSVD3), - PIN(USB_VBUS_EN1_PCC5, USB, RSVD1, RSVD2, RSVD3), - PIN(DP_HPD0_PCC6, DP, RSVD1, RSVD2, RSVD3), - PIN(WIFI_EN_PH0, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(WIFI_RST_PH1, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(WIFI_WAKE_AP_PH2, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(AP_WAKE_BT_PH3, RSVD0, UARTB, SPDIF, RSVD3), - PIN(BT_RST_PH4, RSVD0, UARTB, SPDIF, RSVD3), - PIN(BT_WAKE_AP_PH5, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(AP_WAKE_NFC_PH7, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(NFC_EN_PI0, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(NFC_INT_PI1, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(GPS_EN_PI2, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(GPS_RST_PI3, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(CAM_RST_PS4, VGP1, RSVD1, RSVD2, RSVD3), - PIN(CAM_AF_EN_PS5, VIMCLK, VGP2, RSVD2, RSVD3), - PIN(CAM_FLASH_EN_PS6, VIMCLK, VGP3, RSVD2, RSVD3), - PIN(CAM1_PWDN_PS7, VGP4, RSVD1, RSVD2, RSVD3), - PIN(CAM2_PWDN_PT0, VGP5, RSVD1, RSVD2, RSVD3), - PIN(CAM1_STROBE_PT1, VGP6, RSVD1, RSVD2, RSVD3), - PIN(LCD_TE_PY2, DISPLAYA, RSVD1, RSVD2, RSVD3), - PIN(LCD_BL_PWM_PV0, DISPLAYA, PWM0, SOR0, RSVD3), - PIN(LCD_BL_EN_PV1, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(LCD_RST_PV2, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(LCD_GPIO1_PV3, DISPLAYB, RSVD1, RSVD2, RSVD3), - PIN(LCD_GPIO2_PV4, DISPLAYB, PWM1, RSVD2, SOR1), - PIN(AP_READY_PV5, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(TOUCH_RST_PV6, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(TOUCH_CLK_PV7, TOUCH, RSVD1, RSVD2, RSVD3), - PIN(MODEM_WAKE_AP_PX0, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(TOUCH_INT_PX1, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(MOTION_INT_PX2, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(ALS_PROX_INT_PX3, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(TEMP_ALERT_PX4, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(BUTTON_POWER_ON_PX5, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(BUTTON_VOL_UP_PX6, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(BUTTON_VOL_DOWN_PX7, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(BUTTON_SLIDE_SW_PY0, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(BUTTON_HOME_PY1, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(PA6, SATA, RSVD1, RSVD2, RSVD3), - PIN(PE6, RSVD0, I2S5A, PWM2, RSVD3), - PIN(PE7, RSVD0, I2S5A, PWM3, RSVD3), - PIN(PH6, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(PK0, IQC0, I2S5B, RSVD2, RSVD3), - PIN(PK1, IQC0, I2S5B, RSVD2, RSVD3), - PIN(PK2, IQC0, I2S5B, RSVD2, RSVD3), - PIN(PK3, IQC0, I2S5B, RSVD2, RSVD3), - PIN(PK4, IQC1, RSVD1, RSVD2, RSVD3), - PIN(PK5, IQC1, RSVD1, RSVD2, RSVD3), - PIN(PK6, IQC1, RSVD1, RSVD2, RSVD3), - PIN(PK7, IQC1, RSVD1, RSVD2, RSVD3), - PIN(PL0, RSVD0, RSVD1, RSVD2, RSVD3), - PIN(PL1, SOC, RSVD1, RSVD2, RSVD3), - PIN(PZ0, VIMCLK2, RSVD1, RSVD2, RSVD3), - PIN(PZ1, VIMCLK2, SDMMC1, RSVD2, RSVD3), - PIN(PZ2, SDMMC3, CCLA, RSVD2, RSVD3), - PIN(PZ3, SDMMC3, RSVD1, RSVD2, RSVD3), - PIN(PZ4, SDMMC1, RSVD1, RSVD2, RSVD3), - PIN(PZ5, SOC, RSVD1, RSVD2, RSVD3), -}; -const struct pmux_pingrp_desc *tegra_soc_pingroups = tegra210_pingroups; diff --git a/arch/arm/mach-tegra/tegra210/xusb-padctl.c b/arch/arm/mach-tegra/tegra210/xusb-padctl.c index ab6684f027..64dc297ae2 100644 --- a/arch/arm/mach-tegra/tegra210/xusb-padctl.c +++ b/arch/arm/mach-tegra/tegra210/xusb-padctl.c @@ -170,6 +170,17 @@ static int phy_unprepare(struct tegra_xusb_phy *phy) return tegra_xusb_padctl_disable(phy->padctl); } +#define XUSB_PADCTL_USB3_PAD_MUX 0x28 +#define XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE (1 << 0) +#define XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK0 (1 << 1) +#define XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK1 (1 << 2) +#define XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK2 (1 << 3) +#define XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK3 (1 << 4) +#define XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK4 (1 << 5) +#define XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK5 (1 << 6) +#define XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK6 (1 << 7) +#define XUSB_PADCTL_USB3_PAD_MUX_FORCE_SATA_PAD_IDDQ_DISABLE_MASK0 (1 << 8) + #define XUSB_PADCTL_UPHY_PLL_P0_CTL1 0x360 #define XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_NDIV_MASK (0xff << 20) #define XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_NDIV(x) (((x) & 0xff) << 20) @@ -366,31 +377,6 @@ static int pcie_phy_enable(struct tegra_xusb_phy *phy) value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_CLK_EN; padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8); - value = readl(NV_PA_CLK_RST_BASE + CLK_RST_XUSBIO_PLL_CFG0); - value &= ~CLK_RST_XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL; - value &= ~CLK_RST_XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL; - value |= CLK_RST_XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET; - value |= CLK_RST_XUSBIO_PLL_CFG0_PADPLL_SLEEP_IDDQ; - writel(value, NV_PA_CLK_RST_BASE + CLK_RST_XUSBIO_PLL_CFG0); - - value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1); - value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_PWR_OVRD; - padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1); - - value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2); - value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_OVRD; - padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2); - - value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8); - value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_OVRD; - padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8); - - udelay(1); - - value = readl(NV_PA_CLK_RST_BASE + CLK_RST_XUSBIO_PLL_CFG0); - value |= CLK_RST_XUSBIO_PLL_CFG0_SEQ_ENABLE; - writel(value, NV_PA_CLK_RST_BASE + CLK_RST_XUSBIO_PLL_CFG0); - debug("< %s()\n", __func__); return 0; } @@ -454,3 +440,35 @@ void tegra_xusb_padctl_init(void) ret = tegra_xusb_process_nodes(nodes, count, &tegra210_socdata); debug("%s: done, ret=%d\n", __func__, ret); } + +void tegra_xusb_padctl_exit(void) +{ + u32 value; + + debug("> %s\n", __func__); + + value = padctl_readl(&padctl, XUSB_PADCTL_USB3_PAD_MUX); + value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE; + value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK0; + value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK1; + value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK2; + value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK3; + value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK4; + value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK5; + value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK6; + value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_SATA_PAD_IDDQ_DISABLE_MASK0; + padctl_writel(&padctl, value, XUSB_PADCTL_USB3_PAD_MUX); + + value = padctl_readl(&padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_IDDQ; + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_SLEEP_MASK; + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL1_SLEEP(3); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_ENABLE; + padctl_writel(&padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + + reset_set_enable(PERIPH_ID_PEX_USB_UPHY, 1); + while (padctl.enable) + tegra_xusb_padctl_disable(&padctl); + + debug("< %s()\n", __func__); +} diff --git a/arch/arm/mach-tegra/xusb-padctl-dummy.c b/arch/arm/mach-tegra/xusb-padctl-dummy.c index 3ec27a2e3a..f2d90302f6 100644 --- a/arch/arm/mach-tegra/xusb-padctl-dummy.c +++ b/arch/arm/mach-tegra/xusb-padctl-dummy.c @@ -36,3 +36,7 @@ int __weak tegra_xusb_phy_unprepare(struct tegra_xusb_phy *phy) void __weak tegra_xusb_padctl_init(void) { } + +void __weak tegra_xusb_padctl_exit(void) +{ +} diff --git a/arch/arm/mach-versal/Kconfig b/arch/arm/mach-versal/Kconfig index a08e5ae414..e1d66e8d32 100644 --- a/arch/arm/mach-versal/Kconfig +++ b/arch/arm/mach-versal/Kconfig @@ -56,4 +56,10 @@ config DEFINE_TCM_OCM_MMAP This option if enabled defines the TCM and OCM memory and its memory attributes in MMU table entry. +config VERSAL_NO_DDR + bool "Disable DDR MMU mapping" + help + This option configures MMU with no DDR to avoid speculative + access to DDR memory where DDR is not present. + endif diff --git a/arch/arm/mach-versal/cpu.c b/arch/arm/mach-versal/cpu.c index 6ee6cd43ec..829a6c1b3e 100644 --- a/arch/arm/mach-versal/cpu.c +++ b/arch/arm/mach-versal/cpu.c @@ -81,6 +81,15 @@ void mem_map_fill(void) if (!gd->bd->bi_dram[i].size) break; +#if defined(CONFIG_VERSAL_NO_DDR) + if (gd->bd->bi_dram[i].start < 0x80000000UL || + gd->bd->bi_dram[i].start > 0x100000000UL) { + printf("Ignore caches over %llx/%llx\n", + gd->bd->bi_dram[i].start, + gd->bd->bi_dram[i].size); + continue; + } +#endif versal_mem_map[banks].virt = gd->bd->bi_dram[i].start; versal_mem_map[banks].phys = gd->bd->bi_dram[i].start; versal_mem_map[banks].size = gd->bd->bi_dram[i].size; diff --git a/arch/arm/mach-zynq/spl.c b/arch/arm/mach-zynq/spl.c index 96ba90fb7a..02a7dc9854 100644 --- a/arch/arm/mach-zynq/spl.c +++ b/arch/arm/mach-zynq/spl.c @@ -6,6 +6,7 @@ #include <debug_uart.h> #include <hang.h> #include <spl.h> +#include <generated/dt.h> #include <asm/io.h> #include <asm/spl.h> @@ -44,7 +45,6 @@ u32 spl_boot_device(void) switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) { #ifdef CONFIG_SPL_SPI_SUPPORT case ZYNQ_BM_QSPI: - puts("qspi boot\n"); mode = BOOT_DEVICE_SPI; break; #endif @@ -56,7 +56,6 @@ u32 spl_boot_device(void) break; #ifdef CONFIG_SPL_MMC_SUPPORT case ZYNQ_BM_SD: - puts("mmc boot\n"); mode = BOOT_DEVICE_MMC1; break; #endif @@ -89,8 +88,11 @@ void spl_board_prepare_for_boot(void) int board_fit_config_name_match(const char *name) { /* Just empty function now - can't decide what to choose */ - debug("%s: %s\n", __func__, name); + debug("%s: Check %s, default %s\n", __func__, name, DEVICE_TREE); - return 0; + if (!strcmp(name, DEVICE_TREE)) + return 0; + + return -1; } #endif diff --git a/arch/arm/mach-zynqmp/include/mach/hardware.h b/arch/arm/mach-zynqmp/include/mach/hardware.h index fd361c5ce8..a0acfa2ff1 100644 --- a/arch/arm/mach-zynqmp/include/mach/hardware.h +++ b/arch/arm/mach-zynqmp/include/mach/hardware.h @@ -128,7 +128,9 @@ struct apu_regs { #define ZYNQMP_SILICON_VER_SHIFT 12 struct csu_regs { - u32 reserved0[17]; + u32 reserved0[4]; + u32 multi_boot; + u32 reserved1[12]; u32 version; }; diff --git a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh b/arch/arm/mach-zynqmp/mkimage_fit_atf.sh index 1e770ba111..92e31849f8 100755 --- a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh +++ b/arch/arm/mach-zynqmp/mkimage_fit_atf.sh @@ -29,11 +29,8 @@ else fi if [ ! -f $BL31 ]; then - echo "WARNING: BL31 file $BL31 NOT found, resulting binary is non-functional" >&2 + echo "WARNING: BL31 file $BL31 NOT found, U-Boot will run in EL3" >&2 BL31=/dev/null - # But U-Boot proper could be loaded in EL3 by specifying - # firmware = "uboot"; - # instead of "atf" in config node fi cat << __HEADER_EOF @@ -58,6 +55,10 @@ cat << __HEADER_EOF algo = "md5"; }; }; +__HEADER_EOF + +if [ -f $BL31 ]; then +cat << __ATF atf { description = "ARM Trusted Firmware"; data = /incbin/("$BL31"); @@ -71,7 +72,8 @@ cat << __HEADER_EOF algo = "md5"; }; }; -__HEADER_EOF +__ATF +fi DEFAULT=1 cnt=1 @@ -106,6 +108,15 @@ __CONF_HEADER_EOF cnt=1 for dtname in $DT do +if [ ! -f $BL31 ]; then +cat << __CONF_SECTION1_EOF + config_$cnt { + description = "$(basename $dtname .dtb)"; + firmware = "uboot"; + fdt = "fdt_$cnt"; + }; +__CONF_SECTION1_EOF +else cat << __CONF_SECTION1_EOF config_$cnt { description = "$(basename $dtname .dtb)"; @@ -114,6 +125,8 @@ cat << __CONF_SECTION1_EOF fdt = "fdt_$cnt"; }; __CONF_SECTION1_EOF +fi + cnt=$((cnt+1)) done diff --git a/arch/arm/mach-zynqmp/spl.c b/arch/arm/mach-zynqmp/spl.c index 896657f51c..68df0a79c4 100644 --- a/arch/arm/mach-zynqmp/spl.c +++ b/arch/arm/mach-zynqmp/spl.c @@ -6,7 +6,6 @@ */ #include <common.h> -#include <debug_uart.h> #include <init.h> #include <spl.h> @@ -20,14 +19,6 @@ void board_init_f(ulong dummy) { board_early_init_f(); board_early_init_r(); - -#ifdef CONFIG_DEBUG_UART - /* Uart debug for sure */ - debug_uart_init(); - puts("Debug uart enabled\n"); /* or printch() */ -#endif - /* Delay is required for clocks to be propagated */ - udelay(1000000); } static void ps_mode_reset(ulong mode) @@ -66,6 +57,8 @@ void board_boot_order(u32 *spl_boot_list) spl_boot_list[1] = BOOT_DEVICE_MMC2; if (spl_boot_list[0] == BOOT_DEVICE_MMC2) spl_boot_list[1] = BOOT_DEVICE_MMC1; + + spl_boot_list[2] = BOOT_DEVICE_RAM; } u32 spl_boot_device(void) |