1 files changed, 7 insertions, 55 deletions
diff --git a/arch/arm/mach-rockchip/rk3399-board-spl.c b/arch/arm/mach-rockchip/rk3399-board-spl.c
index ccc136f3881..800ca800223 100644
--- a/arch/arm/mach-rockchip/rk3399-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3399-board-spl.c
@@ -12,12 +12,12 @@
 #include <spl_gpio.h>
 #include <syscon.h>
 #include <asm/io.h>
-#include <asm/arch/bootrom.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/grf_rk3399.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/periph.h>
-#include <asm/arch/sys_proto.h>
+#include <asm/arch-rockchip/bootrom.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/grf_rk3399.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <asm/arch-rockchip/periph.h>
+#include <asm/arch-rockchip/sys_proto.h>
 #include <dm/pinctrl.h>
 
 void board_return_to_bootrom(void)
@@ -127,53 +127,6 @@ void secure_timer_init(void)
 	writel(TIMER_EN | TIMER_FMODE, TIMER_CHN10_BASE + TIMER_CONTROL_REG);
 }
 
-void board_debug_uart_init(void)
-{
-#define GRF_BASE	0xff770000
-#define GPIO0_BASE	0xff720000
-#define PMUGRF_BASE	0xff320000
-	struct rk3399_grf_regs * const grf = (void *)GRF_BASE;
-#ifdef CONFIG_TARGET_CHROMEBOOK_BOB
-	struct rk3399_pmugrf_regs * const pmugrf = (void *)PMUGRF_BASE;
-	struct rockchip_gpio_regs * const gpio = (void *)GPIO0_BASE;
-#endif
-
-#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000)
-	/* Enable early UART0 on the RK3399 */
-	rk_clrsetreg(&grf->gpio2c_iomux,
-		     GRF_GPIO2C0_SEL_MASK,
-		     GRF_UART0BT_SIN << GRF_GPIO2C0_SEL_SHIFT);
-	rk_clrsetreg(&grf->gpio2c_iomux,
-		     GRF_GPIO2C1_SEL_MASK,
-		     GRF_UART0BT_SOUT << GRF_GPIO2C1_SEL_SHIFT);
-#else
-# ifdef CONFIG_TARGET_CHROMEBOOK_BOB
-	rk_setreg(&grf->io_vsel, 1 << 0);
-
-	/*
-	 * Let's enable these power rails here, we are already running the SPI
-	 * Flash based code.
-	 */
-	spl_gpio_output(gpio, GPIO(BANK_B, 2), 1);  /* PP1500_EN */
-	spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 2), GPIO_PULL_NORMAL);
-
-	spl_gpio_output(gpio, GPIO(BANK_B, 4), 1);  /* PP3000_EN */
-	spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 4), GPIO_PULL_NORMAL);
-#endif /* CONFIG_TARGET_CHROMEBOOK_BOB */
-
-	/* Enable early UART2 channel C on the RK3399 */
-	rk_clrsetreg(&grf->gpio4c_iomux,
-		     GRF_GPIO4C3_SEL_MASK,
-		     GRF_UART2DGBC_SIN << GRF_GPIO4C3_SEL_SHIFT);
-	rk_clrsetreg(&grf->gpio4c_iomux,
-		     GRF_GPIO4C4_SEL_MASK,
-		     GRF_UART2DBGC_SOUT << GRF_GPIO4C4_SEL_SHIFT);
-	/* Set channel C as UART2 input */
-	rk_clrsetreg(&grf->soc_con7,
-		     GRF_UART_DBG_SEL_MASK,
-		     GRF_UART_DBG_SEL_C << GRF_UART_DBG_SEL_SHIFT);
-#endif
-}
 
 void board_init_f(ulong dummy)
 {
@@ -183,8 +136,7 @@ void board_init_f(ulong dummy)
 	struct rk3399_grf_regs *grf;
 	int ret;
 
-#define EARLY_UART
-#ifdef EARLY_UART
+#ifdef CONFIG_DEBUG_UART
 	debug_uart_init();
 
 # ifdef CONFIG_TARGET_CHROMEBOOK_BOB