diff options
Diffstat (limited to 'arch/arm/mach-rockchip/rk3368-board-tpl.c')
| -rw-r--r-- | arch/arm/mach-rockchip/rk3368-board-tpl.c | 43 |
1 files changed, 6 insertions, 37 deletions
diff --git a/arch/arm/mach-rockchip/rk3368-board-tpl.c b/arch/arm/mach-rockchip/rk3368-board-tpl.c index f90a1fdca72..dc65a021c81 100644 --- a/arch/arm/mach-rockchip/rk3368-board-tpl.c +++ b/arch/arm/mach-rockchip/rk3368-board-tpl.c @@ -10,12 +10,11 @@ #include <spl.h> #include <syscon.h> #include <asm/io.h> -#include <asm/arch/bootrom.h> -#include <asm/arch/clock.h> -#include <asm/arch/cru_rk3368.h> -#include <asm/arch/grf_rk3368.h> -#include <asm/arch/hardware.h> -#include <asm/arch/timer.h> +#include <asm/arch-rockchip/bootrom.h> +#include <asm/arch-rockchip/clock.h> +#include <asm/arch-rockchip/cru_rk3368.h> +#include <asm/arch-rockchip/hardware.h> +#include <asm/arch-rockchip/timer.h> /* * The SPL (and also the full U-Boot stage on the RK3368) will run in @@ -79,42 +78,12 @@ static void sgrf_init(void) rk_clrreg(&cru->softrst_con[4], DMA2_SRST_REQ); } -void board_debug_uart_init(void) -{ - /* - * N.B.: This is called before the device-model has been - * initialised. For this reason, we can not access - * the GRF address range using the syscon API. - */ - struct rk3368_grf * const grf = - (struct rk3368_grf * const)0xff770000; - - enum { - GPIO2D1_MASK = GENMASK(3, 2), - GPIO2D1_GPIO = 0, - GPIO2D1_UART0_SOUT = (1 << 2), - - GPIO2D0_MASK = GENMASK(1, 0), - GPIO2D0_GPIO = 0, - GPIO2D0_UART0_SIN = (1 << 0), - }; - -#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000) - /* Enable early UART0 on the RK3368 */ - rk_clrsetreg(&grf->gpio2d_iomux, - GPIO2D0_MASK, GPIO2D0_UART0_SIN); - rk_clrsetreg(&grf->gpio2d_iomux, - GPIO2D1_MASK, GPIO2D1_UART0_SOUT); -#endif -} - void board_init_f(ulong dummy) { struct udevice *dev; int ret; -#define EARLY_UART -#ifdef EARLY_UART +#ifdef CONFIG_DEBUG_UART /* * Debug UART can be used from here if required: * |