diff options
Diffstat (limited to 'arch/arm/mach-imx/mx6/clock.c')
| -rw-r--r-- | arch/arm/mach-imx/mx6/clock.c | 1486 |
1 files changed, 1486 insertions, 0 deletions
diff --git a/arch/arm/mach-imx/mx6/clock.c b/arch/arm/mach-imx/mx6/clock.c new file mode 100644 index 0000000000..1f2739e864 --- /dev/null +++ b/arch/arm/mach-imx/mx6/clock.c @@ -0,0 +1,1486 @@ +/* + * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <div64.h> +#include <asm/io.h> +#include <linux/errno.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> + +enum pll_clocks { + PLL_SYS, /* System PLL */ + PLL_BUS, /* System Bus PLL*/ + PLL_USBOTG, /* OTG USB PLL */ + PLL_ENET, /* ENET PLL */ + PLL_AUDIO, /* AUDIO PLL */ + PLL_VIDEO, /* AUDIO PLL */ +}; + +struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + +#ifdef CONFIG_MXC_OCOTP +void enable_ocotp_clk(unsigned char enable) +{ + u32 reg; + + reg = __raw_readl(&imx_ccm->CCGR2); + if (enable) + reg |= MXC_CCM_CCGR2_OCOTP_CTRL_MASK; + else + reg &= ~MXC_CCM_CCGR2_OCOTP_CTRL_MASK; + __raw_writel(reg, &imx_ccm->CCGR2); +} +#endif + +#ifdef CONFIG_NAND_MXS +void setup_gpmi_io_clk(u32 cfg) +{ + /* Disable clocks per ERR007177 from MX6 errata */ + clrbits_le32(&imx_ccm->CCGR4, + MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK | + MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK | + MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK | + MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK | + MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK); + +#if defined(CONFIG_MX6SX) + clrbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK); + + clrsetbits_le32(&imx_ccm->cs2cdr, + MXC_CCM_CS2CDR_QSPI2_CLK_PODF_MASK | + MXC_CCM_CS2CDR_QSPI2_CLK_PRED_MASK | + MXC_CCM_CS2CDR_QSPI2_CLK_SEL_MASK, + cfg); + + setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK); +#else + clrbits_le32(&imx_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK); + + clrsetbits_le32(&imx_ccm->cs2cdr, + MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK | + MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK | + MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK, + cfg); + + setbits_le32(&imx_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK); +#endif + setbits_le32(&imx_ccm->CCGR4, + MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK | + MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK | + MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK | + MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK | + MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK); +} +#endif + +void enable_usboh3_clk(unsigned char enable) +{ + u32 reg; + + reg = __raw_readl(&imx_ccm->CCGR6); + if (enable) + reg |= MXC_CCM_CCGR6_USBOH3_MASK; + else + reg &= ~(MXC_CCM_CCGR6_USBOH3_MASK); + __raw_writel(reg, &imx_ccm->CCGR6); + +} + +#if defined(CONFIG_FEC_MXC) && !defined(CONFIG_MX6SX) +void enable_enet_clk(unsigned char enable) +{ + u32 mask, *addr; + + if (is_mx6ull()) { + mask = MXC_CCM_CCGR0_ENET_CLK_ENABLE_MASK; + addr = &imx_ccm->CCGR0; + } else if (is_mx6ul()) { + mask = MXC_CCM_CCGR3_ENET_MASK; + addr = &imx_ccm->CCGR3; + } else { + mask = MXC_CCM_CCGR1_ENET_MASK; + addr = &imx_ccm->CCGR1; + } + + if (enable) + setbits_le32(addr, mask); + else + clrbits_le32(addr, mask); +} +#endif + +#ifdef CONFIG_MXC_UART +void enable_uart_clk(unsigned char enable) +{ + u32 mask; + + if (is_mx6ul() || is_mx6ull()) + mask = MXC_CCM_CCGR5_UART_MASK; + else + mask = MXC_CCM_CCGR5_UART_MASK | MXC_CCM_CCGR5_UART_SERIAL_MASK; + + if (enable) + setbits_le32(&imx_ccm->CCGR5, mask); + else + clrbits_le32(&imx_ccm->CCGR5, mask); +} +#endif + +#ifdef CONFIG_MMC +int enable_usdhc_clk(unsigned char enable, unsigned bus_num) +{ + u32 mask; + + if (bus_num > 3) + return -EINVAL; + + mask = MXC_CCM_CCGR_CG_MASK << (bus_num * 2 + 2); + if (enable) + setbits_le32(&imx_ccm->CCGR6, mask); + else + clrbits_le32(&imx_ccm->CCGR6, mask); + + return 0; +} +#endif + +#ifdef CONFIG_SYS_I2C_MXC +/* i2c_num can be from 0 - 3 */ +int enable_i2c_clk(unsigned char enable, unsigned i2c_num) +{ + u32 reg; + u32 mask; + u32 *addr; + + if (i2c_num > 3) + return -EINVAL; + if (i2c_num < 3) { + mask = MXC_CCM_CCGR_CG_MASK + << (MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET + + (i2c_num << 1)); + reg = __raw_readl(&imx_ccm->CCGR2); + if (enable) + reg |= mask; + else + reg &= ~mask; + __raw_writel(reg, &imx_ccm->CCGR2); + } else { + if (is_mx6sll()) + return -EINVAL; + if (is_mx6sx() || is_mx6ul() || is_mx6ull()) { + mask = MXC_CCM_CCGR6_I2C4_MASK; + addr = &imx_ccm->CCGR6; + } else { + mask = MXC_CCM_CCGR1_I2C4_SERIAL_MASK; + addr = &imx_ccm->CCGR1; + } + reg = __raw_readl(addr); + if (enable) + reg |= mask; + else + reg &= ~mask; + __raw_writel(reg, addr); + } + return 0; +} +#endif + +/* spi_num can be from 0 - SPI_MAX_NUM */ +int enable_spi_clk(unsigned char enable, unsigned spi_num) +{ + u32 reg; + u32 mask; + + if (spi_num > SPI_MAX_NUM) + return -EINVAL; + + mask = MXC_CCM_CCGR_CG_MASK << (spi_num << 1); + reg = __raw_readl(&imx_ccm->CCGR1); + if (enable) + reg |= mask; + else + reg &= ~mask; + __raw_writel(reg, &imx_ccm->CCGR1); + return 0; +} +static u32 decode_pll(enum pll_clocks pll, u32 infreq) +{ + u32 div, test_div, pll_num, pll_denom; + + switch (pll) { + case PLL_SYS: + div = __raw_readl(&imx_ccm->analog_pll_sys); + div &= BM_ANADIG_PLL_SYS_DIV_SELECT; + + return (infreq * div) >> 1; + case PLL_BUS: + div = __raw_readl(&imx_ccm->analog_pll_528); + div &= BM_ANADIG_PLL_528_DIV_SELECT; + + return infreq * (20 + (div << 1)); + case PLL_USBOTG: + div = __raw_readl(&imx_ccm->analog_usb1_pll_480_ctrl); + div &= BM_ANADIG_USB1_PLL_480_CTRL_DIV_SELECT; + + return infreq * (20 + (div << 1)); + case PLL_ENET: + div = __raw_readl(&imx_ccm->analog_pll_enet); + div &= BM_ANADIG_PLL_ENET_DIV_SELECT; + + return 25000000 * (div + (div >> 1) + 1); + case PLL_AUDIO: + div = __raw_readl(&imx_ccm->analog_pll_audio); + if (!(div & BM_ANADIG_PLL_AUDIO_ENABLE)) + return 0; + /* BM_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC is ignored */ + if (div & BM_ANADIG_PLL_AUDIO_BYPASS) + return MXC_HCLK; + pll_num = __raw_readl(&imx_ccm->analog_pll_audio_num); + pll_denom = __raw_readl(&imx_ccm->analog_pll_audio_denom); + test_div = (div & BM_ANADIG_PLL_AUDIO_TEST_DIV_SELECT) >> + BP_ANADIG_PLL_AUDIO_TEST_DIV_SELECT; + div &= BM_ANADIG_PLL_AUDIO_DIV_SELECT; + if (test_div == 3) { + debug("Error test_div\n"); + return 0; + } + test_div = 1 << (2 - test_div); + + return infreq * (div + pll_num / pll_denom) / test_div; + case PLL_VIDEO: + div = __raw_readl(&imx_ccm->analog_pll_video); + if (!(div & BM_ANADIG_PLL_VIDEO_ENABLE)) + return 0; + /* BM_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC is ignored */ + if (div & BM_ANADIG_PLL_VIDEO_BYPASS) + return MXC_HCLK; + pll_num = __raw_readl(&imx_ccm->analog_pll_video_num); + pll_denom = __raw_readl(&imx_ccm->analog_pll_video_denom); + test_div = (div & BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT) >> + BP_ANADIG_PLL_VIDEO_POST_DIV_SELECT; + div &= BM_ANADIG_PLL_VIDEO_DIV_SELECT; + if (test_div == 3) { + debug("Error test_div\n"); + return 0; + } + test_div = 1 << (2 - test_div); + + return infreq * (div + pll_num / pll_denom) / test_div; + default: + return 0; + } + /* NOTREACHED */ +} +static u32 mxc_get_pll_pfd(enum pll_clocks pll, int pfd_num) +{ + u32 div; + u64 freq; + + switch (pll) { + case PLL_BUS: + if (!is_mx6ul() && !is_mx6ull()) { + if (pfd_num == 3) { + /* No PFD3 on PLL2 */ + return 0; + } + } + div = __raw_readl(&imx_ccm->analog_pfd_528); + freq = (u64)decode_pll(PLL_BUS, MXC_HCLK); + break; + case PLL_USBOTG: + div = __raw_readl(&imx_ccm->analog_pfd_480); + freq = (u64)decode_pll(PLL_USBOTG, MXC_HCLK); + break; + default: + /* No PFD on other PLL */ + return 0; + } + + return lldiv(freq * 18, (div & ANATOP_PFD_FRAC_MASK(pfd_num)) >> + ANATOP_PFD_FRAC_SHIFT(pfd_num)); +} + +static u32 get_mcu_main_clk(void) +{ + u32 reg, freq; + + reg = __raw_readl(&imx_ccm->cacrr); + reg &= MXC_CCM_CACRR_ARM_PODF_MASK; + reg >>= MXC_CCM_CACRR_ARM_PODF_OFFSET; + freq = decode_pll(PLL_SYS, MXC_HCLK); + + return freq / (reg + 1); +} + +u32 get_periph_clk(void) +{ + u32 reg, div = 0, freq = 0; + + reg = __raw_readl(&imx_ccm->cbcdr); + if (reg & MXC_CCM_CBCDR_PERIPH_CLK_SEL) { + div = (reg & MXC_CCM_CBCDR_PERIPH_CLK2_PODF_MASK) >> + MXC_CCM_CBCDR_PERIPH_CLK2_PODF_OFFSET; + reg = __raw_readl(&imx_ccm->cbcmr); + reg &= MXC_CCM_CBCMR_PERIPH_CLK2_SEL_MASK; + reg >>= MXC_CCM_CBCMR_PERIPH_CLK2_SEL_OFFSET; + + switch (reg) { + case 0: + freq = decode_pll(PLL_USBOTG, MXC_HCLK); + break; + case 1: + case 2: + freq = MXC_HCLK; + break; + default: + break; + } + } else { + reg = __raw_readl(&imx_ccm->cbcmr); + reg &= MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK; + reg >>= MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET; + + switch (reg) { + case 0: + freq = decode_pll(PLL_BUS, MXC_HCLK); + break; + case 1: + freq = mxc_get_pll_pfd(PLL_BUS, 2); + break; + case 2: + freq = mxc_get_pll_pfd(PLL_BUS, 0); + break; + case 3: + /* static / 2 divider */ + freq = mxc_get_pll_pfd(PLL_BUS, 2) / 2; + break; + default: + break; + } + } + + return freq / (div + 1); +} + +static u32 get_ipg_clk(void) +{ + u32 reg, ipg_podf; + + reg = __raw_readl(&imx_ccm->cbcdr); + reg &= MXC_CCM_CBCDR_IPG_PODF_MASK; + ipg_podf = reg >> MXC_CCM_CBCDR_IPG_PODF_OFFSET; + + return get_ahb_clk() / (ipg_podf + 1); +} + +static u32 get_ipg_per_clk(void) +{ + u32 reg, perclk_podf; + + reg = __raw_readl(&imx_ccm->cscmr1); + if (is_mx6sll() || is_mx6sl() || is_mx6sx() || + is_mx6dqp() || is_mx6ul() || is_mx6ull()) { + if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK) + return MXC_HCLK; /* OSC 24Mhz */ + } + + perclk_podf = reg & MXC_CCM_CSCMR1_PERCLK_PODF_MASK; + + return get_ipg_clk() / (perclk_podf + 1); +} + +static u32 get_uart_clk(void) +{ + u32 reg, uart_podf; + u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */ + reg = __raw_readl(&imx_ccm->cscdr1); + + if (is_mx6sl() || is_mx6sx() || is_mx6dqp() || is_mx6ul() || + is_mx6sll() || is_mx6ull()) { + if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL) + freq = MXC_HCLK; + } + + reg &= MXC_CCM_CSCDR1_UART_CLK_PODF_MASK; + uart_podf = reg >> MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET; + + return freq / (uart_podf + 1); +} + +static u32 get_cspi_clk(void) +{ + u32 reg, cspi_podf; + + reg = __raw_readl(&imx_ccm->cscdr2); + cspi_podf = (reg & MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK) >> + MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET; + + if (is_mx6dqp() || is_mx6sl() || is_mx6sx() || is_mx6ul() || + is_mx6sll() || is_mx6ull()) { + if (reg & MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK) + return MXC_HCLK / (cspi_podf + 1); + } + + return decode_pll(PLL_USBOTG, MXC_HCLK) / (8 * (cspi_podf + 1)); +} + +static u32 get_axi_clk(void) +{ + u32 root_freq, axi_podf; + u32 cbcdr = __raw_readl(&imx_ccm->cbcdr); + + axi_podf = cbcdr & MXC_CCM_CBCDR_AXI_PODF_MASK; + axi_podf >>= MXC_CCM_CBCDR_AXI_PODF_OFFSET; + + if (cbcdr & MXC_CCM_CBCDR_AXI_SEL) { + if (cbcdr & MXC_CCM_CBCDR_AXI_ALT_SEL) + root_freq = mxc_get_pll_pfd(PLL_USBOTG, 1); + else + root_freq = mxc_get_pll_pfd(PLL_BUS, 2); + } else + root_freq = get_periph_clk(); + + return root_freq / (axi_podf + 1); +} + +static u32 get_emi_slow_clk(void) +{ + u32 emi_clk_sel, emi_slow_podf, cscmr1, root_freq = 0; + + cscmr1 = __raw_readl(&imx_ccm->cscmr1); + emi_clk_sel = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK; + emi_clk_sel >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_OFFSET; + emi_slow_podf = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK; + emi_slow_podf >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_OFFSET; + + switch (emi_clk_sel) { + case 0: + root_freq = get_axi_clk(); + break; + case 1: + root_freq = decode_pll(PLL_USBOTG, MXC_HCLK); + break; + case 2: + root_freq = mxc_get_pll_pfd(PLL_BUS, 2); + break; + case 3: + root_freq = mxc_get_pll_pfd(PLL_BUS, 0); + break; + } + + return root_freq / (emi_slow_podf + 1); +} + +static u32 get_mmdc_ch0_clk(void) +{ + u32 cbcmr = __raw_readl(&imx_ccm->cbcmr); + u32 cbcdr = __raw_readl(&imx_ccm->cbcdr); + + u32 freq, podf, per2_clk2_podf, pmu_misc2_audio_div; + + if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl() || + is_mx6sll()) { + podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) >> + MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET; + if (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK_SEL) { + per2_clk2_podf = (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_MASK) >> + MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_OFFSET; + if (is_mx6sl()) { + if (cbcmr & MXC_CCM_CBCMR_PERIPH2_CLK2_SEL) + freq = MXC_HCLK; + else + freq = decode_pll(PLL_USBOTG, MXC_HCLK); + } else { + if (cbcmr & MXC_CCM_CBCMR_PERIPH2_CLK2_SEL) + freq = decode_pll(PLL_BUS, MXC_HCLK); + else + freq = decode_pll(PLL_USBOTG, MXC_HCLK); + } + } else { + per2_clk2_podf = 0; + switch ((cbcmr & + MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK) >> + MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET) { + case 0: + freq = decode_pll(PLL_BUS, MXC_HCLK); + break; + case 1: + freq = mxc_get_pll_pfd(PLL_BUS, 2); + break; + case 2: + freq = mxc_get_pll_pfd(PLL_BUS, 0); + break; + case 3: + if (is_mx6sl()) { + freq = mxc_get_pll_pfd(PLL_BUS, 2) >> 1; + break; + } + + pmu_misc2_audio_div = PMU_MISC2_AUDIO_DIV(__raw_readl(&imx_ccm->pmu_misc2)); + switch (pmu_misc2_audio_div) { + case 0: + case 2: + pmu_misc2_audio_div = 1; + break; + case 1: + pmu_misc2_audio_div = 2; + break; + case 3: + pmu_misc2_audio_div = 4; + break; + } + freq = decode_pll(PLL_AUDIO, MXC_HCLK) / + pmu_misc2_audio_div; + break; + } + } + return freq / (podf + 1) / (per2_clk2_podf + 1); + } else { + podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK) >> + MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET; + return get_periph_clk() / (podf + 1); + } +} + +#if defined(CONFIG_VIDEO_MXS) +static int enable_pll_video(u32 pll_div, u32 pll_num, u32 pll_denom, + u32 post_div) +{ + u32 reg = 0; + ulong start; + + debug("pll5 div = %d, num = %d, denom = %d\n", + pll_div, pll_num, pll_denom); + + /* Power up PLL5 video */ + writel(BM_ANADIG_PLL_VIDEO_POWERDOWN | + BM_ANADIG_PLL_VIDEO_BYPASS | + BM_ANADIG_PLL_VIDEO_DIV_SELECT | + BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT, + &imx_ccm->analog_pll_video_clr); + + /* Set div, num and denom */ + switch (post_div) { + case 1: + writel(BF_ANADIG_PLL_VIDEO_DIV_SELECT(pll_div) | + BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0x2), + &imx_ccm->analog_pll_video_set); + break; + case 2: + writel(BF_ANADIG_PLL_VIDEO_DIV_SELECT(pll_div) | + BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0x1), + &imx_ccm->analog_pll_video_set); + break; + case 4: + writel(BF_ANADIG_PLL_VIDEO_DIV_SELECT(pll_div) | + BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0x0), + &imx_ccm->analog_pll_video_set); + break; + default: + puts("Wrong test_div!\n"); + return -EINVAL; + } + + writel(BF_ANADIG_PLL_VIDEO_NUM_A(pll_num), + &imx_ccm->analog_pll_video_num); + writel(BF_ANADIG_PLL_VIDEO_DENOM_B(pll_denom), + &imx_ccm->analog_pll_video_denom); + + /* Wait PLL5 lock */ + start = get_timer(0); /* Get current timestamp */ + + do { + reg = readl(&imx_ccm->analog_pll_video); + if (reg & BM_ANADIG_PLL_VIDEO_LOCK) { + /* Enable PLL out */ + writel(BM_ANADIG_PLL_VIDEO_ENABLE, + &imx_ccm->analog_pll_video_set); + return 0; + } + } while (get_timer(0) < (start + 10)); /* Wait 10ms */ + + puts("Lock PLL5 timeout\n"); + + return -ETIME; +} + +/* + * 24M--> PLL_VIDEO -> LCDIFx_PRED -> LCDIFx_PODF -> LCD + * + * 'freq' using KHz as unit, see driver/video/mxsfb.c. + */ +void mxs_set_lcdclk(u32 base_addr, u32 freq) +{ + u32 reg = 0; + u32 hck = MXC_HCLK / 1000; + /* DIV_SELECT ranges from 27 to 54 */ + u32 min = hck * 27; + u32 max = hck * 54; + u32 temp, best = 0; + u32 i, j, max_pred = 8, max_postd = 8, pred = 1, postd = 1; + u32 pll_div, pll_num, pll_denom, post_div = 1; + + debug("mxs_set_lcdclk, freq = %dKHz\n", freq); + + if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull() && !is_mx6sl() && + !is_mx6sll()) { + debug("This chip not support lcd!\n"); + return; + } + + if (!is_mx6sl()) { + if (base_addr == LCDIF1_BASE_ADDR) { + reg = readl(&imx_ccm->cscdr2); + /* Can't change clocks when clock not from pre-mux */ + if ((reg & MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK) != 0) + return; + } + } + + if (is_mx6sx()) { + reg = readl(&imx_ccm->cscdr2); + /* Can't change clocks when clock not from pre-mux */ + if ((reg & MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK) != 0) + return; + } + + temp = freq * max_pred * max_postd; + if (temp < min) { + /* + * Register: PLL_VIDEO + * Bit Field: POST_DIV_SELECT + * 00 — Divide by 4. + * 01 — Divide by 2. + * 10 — Divide by 1. + * 11 — Reserved + * No need to check post_div(1) + */ + for (post_div = 2; post_div <= 4; post_div <<= 1) { + if ((temp * post_div) > min) { + freq *= post_div; + break; + } + } + + if (post_div > 4) { + printf("Fail to set rate to %dkhz", freq); + return; + } + } + + /* Choose the best pred and postd to match freq for lcd */ + for (i = 1; i <= max_pred; i++) { + for (j = 1; j <= max_postd; j++) { + temp = freq * i * j; + if (temp > max || temp < min) + continue; + if (best == 0 || temp < best) { + best = temp; + pred = i; + postd = j; + } + } + } + + if (best == 0) { + printf("Fail to set rate to %dKHz", freq); + return; + } + + debug("best %d, pred = %d, postd = %d\n", best, pred, postd); + + pll_div = best / hck; + pll_denom = 1000000; + pll_num = (best - hck * pll_div) * pll_denom / hck; + + /* + * pll_num + * (24MHz * (pll_div + --------- )) + * pll_denom + *freq KHz = -------------------------------- + * post_div * pred * postd * 1000 + */ + + if (base_addr == LCDIF1_BASE_ADDR) { + if (enable_pll_video(pll_div, pll_num, pll_denom, post_div)) + return; + + enable_lcdif_clock(base_addr, 0); + if (!is_mx6sl()) { + /* Select pre-lcd clock to PLL5 and set pre divider */ + clrsetbits_le32(&imx_ccm->cscdr2, + MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_MASK | + MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_MASK, + (0x2 << MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_OFFSET) | + ((pred - 1) << + MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_OFFSET)); + + /* Set the post divider */ + clrsetbits_le32(&imx_ccm->cbcmr, + MXC_CCM_CBCMR_LCDIF1_PODF_MASK, + ((postd - 1) << + MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET)); + } else { + /* Select pre-lcd clock to PLL5 and set pre divider */ + clrsetbits_le32(&imx_ccm->cscdr2, + MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_MASK | + MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_MASK, + (0x2 << MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_OFFSET) | + ((pred - 1) << + MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_OFFSET)); + + /* Set the post divider */ + clrsetbits_le32(&imx_ccm->cscmr1, + MXC_CCM_CSCMR1_LCDIF_PIX_PODF_MASK, + (((postd - 1)^0x6) << + MXC_CCM_CSCMR1_LCDIF_PIX_PODF_OFFSET)); + } + + enable_lcdif_clock(base_addr, 1); + } else if (is_mx6sx()) { + /* Setting LCDIF2 for i.MX6SX */ + if (enable_pll_video(pll_div, pll_num, pll_denom, post_div)) + return; + + enable_lcdif_clock(base_addr, 0); + /* Select pre-lcd clock to PLL5 and set pre divider */ + clrsetbits_le32(&imx_ccm->cscdr2, + MXC_CCM_CSCDR2_LCDIF2_PRED_SEL_MASK | + MXC_CCM_CSCDR2_LCDIF2_PRE_DIV_MASK, + (0x2 << MXC_CCM_CSCDR2_LCDIF2_PRED_SEL_OFFSET) | + ((pred - 1) << + MXC_CCM_CSCDR2_LCDIF2_PRE_DIV_OFFSET)); + + /* Set the post divider */ + clrsetbits_le32(&imx_ccm->cscmr1, + MXC_CCM_CSCMR1_LCDIF2_PODF_MASK, + ((postd - 1) << + MXC_CCM_CSCMR1_LCDIF2_PODF_OFFSET)); + + enable_lcdif_clock(base_addr, 1); + } +} + +int enable_lcdif_clock(u32 base_addr, bool enable) +{ + u32 reg = 0; + u32 lcdif_clk_sel_mask, lcdif_ccgr3_mask; + + if (is_mx6sx()) { + if ((base_addr != LCDIF1_BASE_ADDR) && + (base_addr != LCDIF2_BASE_ADDR)) { + puts("Wrong LCD interface!\n"); + return -EINVAL; + } + /* Set to pre-mux clock at default */ + lcdif_clk_sel_mask = (base_addr == LCDIF2_BASE_ADDR) ? + MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK : + MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK; + lcdif_ccgr3_mask = (base_addr == LCDIF2_BASE_ADDR) ? + (MXC_CCM_CCGR3_LCDIF2_PIX_MASK | + MXC_CCM_CCGR3_DISP_AXI_MASK) : + (MXC_CCM_CCGR3_LCDIF1_PIX_MASK | + MXC_CCM_CCGR3_DISP_AXI_MASK); + } else if (is_mx6ul() || is_mx6ull() || is_mx6sll()) { + if (base_addr != LCDIF1_BASE_ADDR) { + puts("Wrong LCD interface!\n"); + return -EINVAL; + } + /* Set to pre-mux clock at default */ + lcdif_clk_sel_mask = MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK; + lcdif_ccgr3_mask = MXC_CCM_CCGR3_LCDIF1_PIX_MASK; + } else if (is_mx6sl()) { + if (base_addr != LCDIF1_BASE_ADDR) { + puts("Wrong LCD interface!\n"); + return -EINVAL; + } + + reg = readl(&imx_ccm->CCGR3); + reg &= ~(MXC_CCM_CCGR3_LCDIF_AXI_MASK | + MXC_CCM_CCGR3_LCDIF_PIX_MASK); + writel(reg, &imx_ccm->CCGR3); + + if (enable) { + reg = readl(&imx_ccm->cscdr3); + reg &= ~MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_MASK; + reg |= 1 << MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_OFFSET; + writel(reg, &imx_ccm->cscdr3); + + reg = readl(&imx_ccm->CCGR3); + reg |= MXC_CCM_CCGR3_LCDIF_AXI_MASK | + MXC_CCM_CCGR3_LCDIF_PIX_MASK; + writel(reg, &imx_ccm->CCGR3); + } + + return 0; + } else { + return 0; + } + + /* Gate LCDIF clock first */ + reg = readl(&imx_ccm->CCGR3); + reg &= ~lcdif_ccgr3_mask; + writel(reg, &imx_ccm->CCGR3); + + reg = readl(&imx_ccm->CCGR2); + reg &= ~MXC_CCM_CCGR2_LCD_MASK; + writel(reg, &imx_ccm->CCGR2); + + if (enable) { + /* Select pre-mux */ + reg = readl(&imx_ccm->cscdr2); + reg &= ~lcdif_clk_sel_mask; + writel(reg, &imx_ccm->cscdr2); + + /* Enable the LCDIF pix clock */ + reg = readl(&imx_ccm->CCGR3); + reg |= lcdif_ccgr3_mask; + writel(reg, &imx_ccm->CCGR3); + + reg = readl(&imx_ccm->CCGR2); + reg |= MXC_CCM_CCGR2_LCD_MASK; + writel(reg, &imx_ccm->CCGR2); + } + + return 0; +} +#endif + +#ifdef CONFIG_FSL_QSPI +/* qspi_num can be from 0 - 1 */ +void enable_qspi_clk(int qspi_num) +{ + u32 reg = 0; + /* Enable QuadSPI clock */ + switch (qspi_num) { + case 0: + /* disable the clock gate */ + clrbits_le32(&imx_ccm->CCGR3, MXC_CCM_CCGR3_QSPI1_MASK); + + /* set 50M : (50 = 396 / 2 / 4) */ + reg = readl(&imx_ccm->cscmr1); + reg &= ~(MXC_CCM_CSCMR1_QSPI1_PODF_MASK | + MXC_CCM_CSCMR1_QSPI1_CLK_SEL_MASK); + reg |= ((1 << MXC_CCM_CSCMR1_QSPI1_PODF_OFFSET) | + (2 << MXC_CCM_CSCMR1_QSPI1_CLK_SEL_OFFSET)); + writel(reg, &imx_ccm->cscmr1); + + /* enable the clock gate */ + setbits_le32(&imx_ccm->CCGR3, MXC_CCM_CCGR3_QSPI1_MASK); + break; + case 1: + /* + * disable the clock gate + * QSPI2 and GPMI_BCH_INPUT_GPMI_IO share the same clock gate, + * disable both of them. + */ + clrbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK | + MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK); + + /* set 50M : (50 = 396 / 2 / 4) */ + reg = readl(&imx_ccm->cs2cdr); + reg &= ~(MXC_CCM_CS2CDR_QSPI2_CLK_PODF_MASK | + MXC_CCM_CS2CDR_QSPI2_CLK_PRED_MASK | + MXC_CCM_CS2CDR_QSPI2_CLK_SEL_MASK); + reg |= (MXC_CCM_CS2CDR_QSPI2_CLK_PRED(0x1) | + MXC_CCM_CS2CDR_QSPI2_CLK_SEL(0x3)); + writel(reg, &imx_ccm->cs2cdr); + + /*enable the clock gate*/ + setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK | + MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK); + break; + default: + break; + } +} +#endif + +#ifdef CONFIG_FEC_MXC +int enable_fec_anatop_clock(int fec_id, enum enet_freq freq) +{ + u32 reg = 0; + s32 timeout = 100000; + + struct anatop_regs __iomem *anatop = + (struct anatop_regs __iomem *)ANATOP_BASE_ADDR; + + if (freq < ENET_25MHZ || freq > ENET_125MHZ) + return -EINVAL; + + reg = readl(&anatop->pll_enet); + + if (fec_id == 0) { + reg &= ~BM_ANADIG_PLL_ENET_DIV_SELECT; + reg |= BF_ANADIG_PLL_ENET_DIV_SELECT(freq); + } else if (fec_id == 1) { + /* Only i.MX6SX/UL support ENET2 */ + if (!(is_mx6sx() || is_mx6ul() || is_mx6ull())) + return -EINVAL; + reg &= ~BM_ANADIG_PLL_ENET2_DIV_SELECT; + reg |= BF_ANADIG_PLL_ENET2_DIV_SELECT(freq); + } else { + return -EINVAL; + } + + if ((reg & BM_ANADIG_PLL_ENET_POWERDOWN) || + (!(reg & BM_ANADIG_PLL_ENET_LOCK))) { + reg &= ~BM_ANADIG_PLL_ENET_POWERDOWN; + writel(reg, &anatop->pll_enet); + while (timeout--) { + if (readl(&anatop->pll_enet) & BM_ANADIG_PLL_ENET_LOCK) + break; + } + if (timeout < 0) + return -ETIMEDOUT; + } + + /* Enable FEC clock */ + if (fec_id == 0) + reg |= BM_ANADIG_PLL_ENET_ENABLE; + else + reg |= BM_ANADIG_PLL_ENET2_ENABLE; + reg &= ~BM_ANADIG_PLL_ENET_BYPASS; + writel(reg, &anatop->pll_enet); + +#ifdef CONFIG_MX6SX + /* Disable enet system clcok before switching clock parent */ + reg = readl(&imx_ccm->CCGR3); + reg &= ~MXC_CCM_CCGR3_ENET_MASK; + writel(reg, &imx_ccm->CCGR3); + + /* + * Set enet ahb clock to 200MHz + * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB + */ + reg = readl(&imx_ccm->chsccdr); + reg &= ~(MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_MASK + | MXC_CCM_CHSCCDR_ENET_PODF_MASK + | MXC_CCM_CHSCCDR_ENET_CLK_SEL_MASK); + /* PLL2 PFD2 */ + reg |= (4 << MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_OFFSET); + /* Div = 2*/ + reg |= (1 << MXC_CCM_CHSCCDR_ENET_PODF_OFFSET); + reg |= (0 << MXC_CCM_CHSCCDR_ENET_CLK_SEL_OFFSET); + writel(reg, &imx_ccm->chsccdr); + + /* Enable enet system clock */ + reg = readl(&imx_ccm->CCGR3); + reg |= MXC_CCM_CCGR3_ENET_MASK; + writel(reg, &imx_ccm->CCGR3); +#endif + return 0; +} +#endif + +static u32 get_usdhc_clk(u32 port) +{ + u32 root_freq = 0, usdhc_podf = 0, clk_sel = 0; + u32 cscmr1 = __raw_readl(&imx_ccm->cscmr1); + u32 cscdr1 = __raw_readl(&imx_ccm->cscdr1); + + if (is_mx6ul() || is_mx6ull()) { + if (port > 1) + return 0; + } + + if (is_mx6sll()) { + if (port > 2) + return 0; + } + + switch (port) { + case 0: + usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC1_PODF_MASK) >> + MXC_CCM_CSCDR1_USDHC1_PODF_OFFSET; + clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC1_CLK_SEL; + + break; + case 1: + usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC2_PODF_MASK) >> + MXC_CCM_CSCDR1_USDHC2_PODF_OFFSET; + clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC2_CLK_SEL; + + break; + case 2: + usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC3_PODF_MASK) >> + MXC_CCM_CSCDR1_USDHC3_PODF_OFFSET; + clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC3_CLK_SEL; + + break; + case 3: + usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC4_PODF_MASK) >> + MXC_CCM_CSCDR1_USDHC4_PODF_OFFSET; + clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC4_CLK_SEL; + + break; + default: + break; + } + + if (clk_sel) + root_freq = mxc_get_pll_pfd(PLL_BUS, 0); + else + root_freq = mxc_get_pll_pfd(PLL_BUS, 2); + + return root_freq / (usdhc_podf + 1); +} + +u32 imx_get_uartclk(void) +{ + return get_uart_clk(); +} + +u32 imx_get_fecclk(void) +{ + return mxc_get_clock(MXC_IPG_CLK); +} + +#if defined(CONFIG_SATA) || defined(CONFIG_PCIE_IMX) +static int enable_enet_pll(uint32_t en) +{ + struct mxc_ccm_reg *const imx_ccm + = (struct mxc_ccm_reg *) CCM_BASE_ADDR; + s32 timeout = 100000; + u32 reg = 0; + + /* Enable PLLs */ + reg = readl(&imx_ccm->analog_pll_enet); + reg &= ~BM_ANADIG_PLL_SYS_POWERDOWN; + writel(reg, &imx_ccm->analog_pll_enet); + reg |= BM_ANADIG_PLL_SYS_ENABLE; + while (timeout--) { + if (readl(&imx_ccm->analog_pll_enet) & BM_ANADIG_PLL_SYS_LOCK) + break; + } + if (timeout <= 0) + return -EIO; + reg &= ~BM_ANADIG_PLL_SYS_BYPASS; + writel(reg, &imx_ccm->analog_pll_enet); + reg |= en; + writel(reg, &imx_ccm->analog_pll_enet); + return 0; +} +#endif + +#ifdef CONFIG_SATA +static void ungate_sata_clock(void) +{ + struct mxc_ccm_reg *const imx_ccm = + (struct mxc_ccm_reg *)CCM_BASE_ADDR; + + /* Enable SATA clock. */ + setbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK); +} + +int enable_sata_clock(void) +{ + ungate_sata_clock(); + return enable_enet_pll(BM_ANADIG_PLL_ENET_ENABLE_SATA); +} + +void disable_sata_clock(void) +{ + struct mxc_ccm_reg *const imx_ccm = + (struct mxc_ccm_reg *)CCM_BASE_ADDR; + + clrbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK); +} +#endif + +#ifdef CONFIG_PCIE_IMX +static void ungate_pcie_clock(void) +{ + struct mxc_ccm_reg *const imx_ccm = + (struct mxc_ccm_reg *)CCM_BASE_ADDR; + + /* Enable PCIe clock. */ + setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_PCIE_MASK); +} + +int enable_pcie_clock(void) +{ + struct anatop_regs *anatop_regs = + (struct anatop_regs *)ANATOP_BASE_ADDR; + struct mxc_ccm_reg *ccm_regs = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + u32 lvds1_clk_sel; + + /* + * Here be dragons! + * + * The register ANATOP_MISC1 is not documented in the Freescale + * MX6RM. The register that is mapped in the ANATOP space and + * marked as ANATOP_MISC1 is actually documented in the PMU section + * of the datasheet as PMU_MISC1. + * + * Switch LVDS clock source to SATA (0xb) on mx6q/dl or PCI (0xa) on + * mx6sx, disable clock INPUT and enable clock OUTPUT. This is important + * for PCI express link that is clocked from the i.MX6. + */ +#define ANADIG_ANA_MISC1_LVDSCLK1_IBEN (1 << 12) +#define ANADIG_ANA_MISC1_LVDSCLK1_OBEN (1 << 10) +#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK 0x0000001F +#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF 0xa +#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF 0xb + + if (is_mx6sx()) + lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF; + else + lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF; + + clrsetbits_le32(&anatop_regs->ana_misc1, + ANADIG_ANA_MISC1_LVDSCLK1_IBEN | + ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK, + ANADIG_ANA_MISC1_LVDSCLK1_OBEN | lvds1_clk_sel); + + /* PCIe reference clock sourced from AXI. */ + clrbits_le32(&ccm_regs->cbcmr, MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL); + + /* Party time! Ungate the clock to the PCIe. */ +#ifdef CONFIG_SATA + ungate_sata_clock(); +#endif + ungate_pcie_clock(); + + return enable_enet_pll(BM_ANADIG_PLL_ENET_ENABLE_SATA | + BM_ANADIG_PLL_ENET_ENABLE_PCIE); +} +#endif + +#ifdef CONFIG_SECURE_BOOT +void hab_caam_clock_enable(unsigned char enable) +{ + u32 reg; + + if (is_mx6ull() || is_mx6sll()) { + /* CG5, DCP clock */ + reg = __raw_readl(&imx_ccm->CCGR0); + if (enable) + reg |= MXC_CCM_CCGR0_DCP_CLK_MASK; + else + reg &= ~MXC_CCM_CCGR0_DCP_CLK_MASK; + __raw_writel(reg, &imx_ccm->CCGR0); + } else { + /* CG4 ~ CG6, CAAM clocks */ + reg = __raw_readl(&imx_ccm->CCGR0); + if (enable) + reg |= (MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK | + MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK | + MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK); + else + reg &= ~(MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK | + MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK | + MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK); + __raw_writel(reg, &imx_ccm->CCGR0); + } + + /* EMI slow clk */ + reg = __raw_readl(&imx_ccm->CCGR6); + if (enable) + reg |= MXC_CCM_CCGR6_EMI_SLOW_MASK; + else + reg &= ~MXC_CCM_CCGR6_EMI_SLOW_MASK; + __raw_writel(reg, &imx_ccm->CCGR6); +} +#endif + +static void enable_pll3(void) +{ + struct anatop_regs __iomem *anatop = + (struct anatop_regs __iomem *)ANATOP_BASE_ADDR; + + /* make sure pll3 is enabled */ + if ((readl(&anatop->usb1_pll_480_ctrl) & + BM_ANADIG_USB1_PLL_480_CTRL_LOCK) == 0) { + /* enable pll's power */ + writel(BM_ANADIG_USB1_PLL_480_CTRL_POWER, + &anatop->usb1_pll_480_ctrl_set); + writel(0x80, &anatop->ana_misc2_clr); + /* wait for pll lock */ + while ((readl(&anatop->usb1_pll_480_ctrl) & + BM_ANADIG_USB1_PLL_480_CTRL_LOCK) == 0) + ; + /* disable bypass */ + writel(BM_ANADIG_USB1_PLL_480_CTRL_BYPASS, + &anatop->usb1_pll_480_ctrl_clr); + /* enable pll output */ + writel(BM_ANADIG_USB1_PLL_480_CTRL_ENABLE, + &anatop->usb1_pll_480_ctrl_set); + } +} + +void enable_thermal_clk(void) +{ + enable_pll3(); +} + +unsigned int mxc_get_clock(enum mxc_clock clk) +{ + switch (clk) { + case MXC_ARM_CLK: + return get_mcu_main_clk(); + case MXC_PER_CLK: + return get_periph_clk(); + case MXC_AHB_CLK: + return get_ahb_clk(); + case MXC_IPG_CLK: + return get_ipg_clk(); + case MXC_IPG_PERCLK: + case MXC_I2C_CLK: + return get_ipg_per_clk(); + case MXC_UART_CLK: + return get_uart_clk(); + case MXC_CSPI_CLK: + return get_cspi_clk(); + case MXC_AXI_CLK: + return get_axi_clk(); + case MXC_EMI_SLOW_CLK: + return get_emi_slow_clk(); + case MXC_DDR_CLK: + return get_mmdc_ch0_clk(); + case MXC_ESDHC_CLK: + return get_usdhc_clk(0); + case MXC_ESDHC2_CLK: + return get_usdhc_clk(1); + case MXC_ESDHC3_CLK: + return get_usdhc_clk(2); + case MXC_ESDHC4_CLK: + return get_usdhc_clk(3); + case MXC_SATA_CLK: + return get_ahb_clk(); + default: + printf("Unsupported MXC CLK: %d\n", clk); + break; + } + + return 0; +} + +/* + * Dump some core clockes. + */ +int do_mx6_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + u32 freq; + freq = decode_pll(PLL_SYS, MXC_HCLK); + printf("PLL_SYS %8d MHz\n", freq / 1000000); + freq = decode_pll(PLL_BUS, MXC_HCLK); + printf("PLL_BUS %8d MHz\n", freq / 1000000); + freq = decode_pll(PLL_USBOTG, MXC_HCLK); + printf("PLL_OTG %8d MHz\n", freq / 1000000); + freq = decode_pll(PLL_ENET, MXC_HCLK); + printf("PLL_NET %8d MHz\n", freq / 1000000); + + printf("\n"); + printf("ARM %8d kHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000); + printf("IPG %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000); + printf("UART %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000); +#ifdef CONFIG_MXC_SPI + printf("CSPI %8d kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000); +#endif + printf("AHB %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000); + printf("AXI %8d kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000); + printf("DDR %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000); + printf("USDHC1 %8d kHz\n", mxc_get_clock(MXC_ESDHC_CLK) / 1000); + printf("USDHC2 %8d kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000); + printf("USDHC3 %8d kHz\n", mxc_get_clock(MXC_ESDHC3_CLK) / 1000); + printf("USDHC4 %8d kHz\n", mxc_get_clock(MXC_ESDHC4_CLK) / 1000); + printf("EMI SLOW %8d kHz\n", mxc_get_clock(MXC_EMI_SLOW_CLK) / 1000); + printf("IPG PERCLK %8d kHz\n", mxc_get_clock(MXC_IPG_PERCLK) / 1000); + + return 0; +} + +#ifndef CONFIG_MX6SX +void enable_ipu_clock(void) +{ + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + int reg; + reg = readl(&mxc_ccm->CCGR3); + reg |= MXC_CCM_CCGR3_IPU1_IPU_MASK; + writel(reg, &mxc_ccm->CCGR3); + + if (is_mx6dqp()) { + setbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_PRG_CLK0_MASK); + setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU2_IPU_MASK); + } +} +#endif + +#if defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) || defined(CONFIG_MX6DL) || \ + defined(CONFIG_MX6S) +static void disable_ldb_di_clock_sources(void) +{ + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + int reg; + + /* Make sure PFDs are disabled at boot. */ + reg = readl(&mxc_ccm->analog_pfd_528); + /* Cannot disable pll2_pfd2_396M, as it is the MMDC clock in iMX6DL */ + if (is_mx6sdl()) + reg |= 0x80008080; + else + reg |= 0x80808080; + writel(reg, &mxc_ccm->analog_pfd_528); + + /* Disable PLL3 PFDs */ + reg = readl(&mxc_ccm->analog_pfd_480); + reg |= 0x80808080; + writel(reg, &mxc_ccm->analog_pfd_480); + + /* Disable PLL5 */ + reg = readl(&mxc_ccm->analog_pll_video); + reg &= ~(1 << 13); + writel(reg, &mxc_ccm->analog_pll_video); +} + +static void enable_ldb_di_clock_sources(void) +{ + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + int reg; + + reg = readl(&mxc_ccm->analog_pfd_528); + if (is_mx6sdl()) + reg &= ~(0x80008080); + else + reg &= ~(0x80808080); + writel(reg, &mxc_ccm->analog_pfd_528); + + reg = readl(&mxc_ccm->analog_pfd_480); + reg &= ~(0x80808080); + writel(reg, &mxc_ccm->analog_pfd_480); +} + +/* + * Try call this function as early in the boot process as possible since the + * function temporarily disables PLL2 PFD's, PLL3 PFD's and PLL5. + */ +void select_ldb_di_clock_source(enum ldb_di_clock clk) +{ + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + int reg; + + /* + * Need to follow a strict procedure when changing the LDB + * clock, else we can introduce a glitch. Things to keep in + * mind: + * 1. The current and new parent clocks must be disabled. + * 2. The default clock for ldb_dio_clk is mmdc_ch1 which has + * no CG bit. + * 3. In the RTL implementation of the LDB_DI_CLK_SEL mux + * the top four options are in one mux and the PLL3 option along + * with another option is in the second mux. There is third mux + * used to decide between the first and second mux. + * The code below switches the parent to the bottom mux first + * and then manipulates the top mux. This ensures that no glitch + * will enter the divider. + * + * Need to disable MMDC_CH1 clock manually as there is no CG bit + * for this clock. The only way to disable this clock is to move + * it to pll3_sw_clk and then to disable pll3_sw_clk + * Make sure periph2_clk2_sel is set to pll3_sw_clk + */ + + /* Disable all ldb_di clock parents */ + disable_ldb_di_clock_sources(); + + /* Set MMDC_CH1 mask bit */ + reg = readl(&mxc_ccm->ccdr); + reg |= MXC_CCM_CCDR_MMDC_CH1_HS_MASK; + writel(reg, &mxc_ccm->ccdr); + + /* Set periph2_clk2_sel to be sourced from PLL3_sw_clk */ + reg = readl(&mxc_ccm->cbcmr); + reg &= ~MXC_CCM_CBCMR_PERIPH2_CLK2_SEL; + writel(reg, &mxc_ccm->cbcmr); + + /* + * Set the periph2_clk_sel to the top mux so that + * mmdc_ch1 is from pll3_sw_clk. + */ + reg = readl(&mxc_ccm->cbcdr); + reg |= MXC_CCM_CBCDR_PERIPH2_CLK_SEL; + writel(reg, &mxc_ccm->cbcdr); + + /* Wait for the clock switch */ + while (readl(&mxc_ccm->cdhipr)) + ; + /* Disable pll3_sw_clk by selecting bypass clock source */ + reg = readl(&mxc_ccm->ccsr); + reg |= MXC_CCM_CCSR_PLL3_SW_CLK_SEL; + writel(reg, &mxc_ccm->ccsr); + + /* Set the ldb_di0_clk and ldb_di1_clk to 111b */ + reg = readl(&mxc_ccm->cs2cdr); + reg |= ((7 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET) + | (7 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)); + writel(reg, &mxc_ccm->cs2cdr); + + /* Set the ldb_di0_clk and ldb_di1_clk to 100b */ + reg = readl(&mxc_ccm->cs2cdr); + reg &= ~(MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK + | MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK); + reg |= ((4 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET) + | (4 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)); + writel(reg, &mxc_ccm->cs2cdr); + + /* Set the ldb_di0_clk and ldb_di1_clk to desired source */ + reg = readl(&mxc_ccm->cs2cdr); + reg &= ~(MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK + | MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK); + reg |= ((clk << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET) + | (clk << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)); + writel(reg, &mxc_ccm->cs2cdr); + + /* Unbypass pll3_sw_clk */ + reg = readl(&mxc_ccm->ccsr); + reg &= ~MXC_CCM_CCSR_PLL3_SW_CLK_SEL; + writel(reg, &mxc_ccm->ccsr); + + /* + * Set the periph2_clk_sel back to the bottom mux so that + * mmdc_ch1 is from its original parent. + */ + reg = readl(&mxc_ccm->cbcdr); + reg &= ~MXC_CCM_CBCDR_PERIPH2_CLK_SEL; + writel(reg, &mxc_ccm->cbcdr); + + /* Wait for the clock switch */ + while (readl(&mxc_ccm->cdhipr)) + ; + /* Clear MMDC_CH1 mask bit */ + reg = readl(&mxc_ccm->ccdr); + reg &= ~MXC_CCM_CCDR_MMDC_CH1_HS_MASK; + writel(reg, &mxc_ccm->ccdr); + + enable_ldb_di_clock_sources(); +} +#endif + +#ifdef CONFIG_MTD_NOR_FLASH +void enable_eim_clk(unsigned char enable) +{ + u32 reg; + + reg = __raw_readl(&imx_ccm->CCGR6); + if (enable) + reg |= MXC_CCM_CCGR6_EMI_SLOW_MASK; + else + reg &= ~MXC_CCM_CCGR6_EMI_SLOW_MASK; + __raw_writel(reg, &imx_ccm->CCGR6); +} +#endif + +/***************************************************/ + +U_BOOT_CMD( + clocks, CONFIG_SYS_MAXARGS, 1, do_mx6_showclocks, + "display clocks", + "" +); |