diff options
Diffstat (limited to 'arch/arm/dts/sun5i-a10s-olinuxino-micro.dts')
| -rw-r--r-- | arch/arm/dts/sun5i-a10s-olinuxino-micro.dts | 82 |
1 files changed, 49 insertions, 33 deletions
diff --git a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts index aef91476f9..2c902ed2c8 100644 --- a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts @@ -48,7 +48,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A10s-Olinuxino Micro"; @@ -64,6 +63,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -77,13 +87,17 @@ }; }; +&be0 { + status = "okay"; +}; + &ehci0 { status = "okay"; }; &emac { pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; + pinctrl-0 = <&emac_pins_b>; phy = <&phy1>; status = "okay"; }; @@ -92,6 +106,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -177,8 +201,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - cd-inverted; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ status = "okay"; }; @@ -187,8 +210,7 @@ pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ - cd-inverted; + cd-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */ status = "okay"; }; @@ -202,38 +224,32 @@ &pio { mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { - allwinner,pins = "PG13"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG13"; + function = "gpio_in"; + bias-pull-up; }; led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PE3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PE3"; + function = "gpio_out"; + drive-strength = <20>; }; usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 { - allwinner,pins = "PB10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB10"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG12"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG12"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -250,8 +266,12 @@ &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>, - <&spi2_cs0_pins_a>; + pinctrl-0 = <&spi2_pins_b>, + <&spi2_cs0_pins_b>; + status = "okay"; +}; + +&tcon0 { status = "okay"; }; @@ -263,7 +283,7 @@ &uart2 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; + pinctrl-0 = <&uart2_pins_b>; status = "okay"; }; @@ -278,10 +298,6 @@ status = "okay"; }; -&usb0_vbus_pin_a { - allwinner,pins = "PG11"; -}; - &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>; |