diff options
Diffstat (limited to 'arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts')
| -rw-r--r-- | arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts | 89 |
1 files changed, 16 insertions, 73 deletions
diff --git a/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts index ea90634e482..84b25be1ac9 100644 --- a/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts +++ b/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts @@ -46,7 +46,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> #include <dt-bindings/pwm/pwm.h> / { @@ -59,8 +58,6 @@ backlight: backlight { compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_protab>; pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; @@ -73,8 +70,6 @@ }; &codec { - pinctrl-names = "default"; - pinctrl-0 = <&codec_pa_pin>; allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ status = "okay"; }; @@ -88,8 +83,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -101,27 +94,14 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - - /* Accelerometer */ - bma250@18 { - compatible = "bosch,bma250"; - reg = <0x18>; - interrupt-parent = <&pio>; - interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */ - }; + /* pull-ups and devices require AXP209 LDO3 */ + status = "failed"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; - pixcir_ts@5c { - pinctrl-names = "default"; - pinctrl-0 = <&touchscreen_pins>; + touchscreen@5c { compatible = "pixcir,pixcir_tangoc"; reg = <0x5c>; interrupt-parent = <&pio>; @@ -140,14 +120,14 @@ vref-supply = <®_ldo2>; status = "okay"; - button@400 { + button-400 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <400000>; }; - button@800 { + button-800 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; @@ -156,12 +136,9 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; @@ -170,45 +147,22 @@ }; &pio { - bl_en_pin_protab: bl_en_pin@0 { - allwinner,pins = "PH7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + usb0_id_detect_pin: usb0-id-detect-pin { + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; - codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - touchscreen_pins: touchscreen_pins@0 { - allwinner,pins = "PA5", "PB13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + usb0_vbus_detect_pin: usb0-vbus-detect-pin { + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; @@ -237,17 +191,6 @@ regulator-name = "avcc"; }; -®_ldo3 { - /* - * We need to always power the camera sensor, otherwhise all access - * to i2c1 is blocked. - */ - regulator-always-on; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-name = "vdd-csi"; -}; - ®_usb0_vbus { status = "okay"; }; @@ -258,7 +201,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; |