diff options
Diffstat (limited to 'arch/arm/dts/k3-am68-sk-r5-base-board.dts')
| -rw-r--r-- | arch/arm/dts/k3-am68-sk-r5-base-board.dts | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/arch/arm/dts/k3-am68-sk-r5-base-board.dts b/arch/arm/dts/k3-am68-sk-r5-base-board.dts index 46ee6c4422..a64baba149 100644 --- a/arch/arm/dts/k3-am68-sk-r5-base-board.dts +++ b/arch/arm/dts/k3-am68-sk-r5-base-board.dts @@ -23,7 +23,7 @@ fs_loader0: fs_loader@0 { compatible = "u-boot,fs-loader"; - u-boot,dm-pre-reloc; + bootph-all; }; a72_0: a72@0 { @@ -39,27 +39,27 @@ ti,sci = <&sms>; ti,sci-proc-id = <32>; ti,sci-host-id = <10>; - u-boot,dm-spl; + bootph-pre-ram; }; clk_200mhz: dummy_clock_200mhz { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <200000000>; - u-boot,dm-spl; + bootph-pre-ram; }; clk_19_2mhz: dummy_clock_19_2mhz { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; - u-boot,dm-spl; + bootph-pre-ram; }; }; &cbass_mcu_wakeup { sa3_secproxy: secproxy@44880000 { - u-boot,dm-spl; + bootph-pre-ram; compatible = "ti,am654-secure-proxy"; reg = <0x0 0x44880000 0x0 0x20000>, <0x0 0x44860000 0x0 0x20000>, @@ -75,14 +75,14 @@ <0x0 0x2a480000 0x0 0x80000>; reg-names = "rt", "scfg", "target_data"; #mbox-cells = <1>; - u-boot,dm-spl; + bootph-pre-ram; }; sysctrler: sysctrler { compatible = "ti,am654-system-controller"; mboxes= <&mcu_secproxy 4>, <&mcu_secproxy 5>, <&sa3_secproxy 5>; mbox-names = "tx", "rx", "boot_notify"; - u-boot,dm-spl; + bootph-pre-ram; }; dm_tifs: dm-tifs { @@ -92,7 +92,7 @@ mbox-names = "rx", "tx"; mboxes= <&mcu_secproxy 21>, <&mcu_secproxy 23>; - u-boot,dm-spl; + bootph-pre-ram; }; }; @@ -126,7 +126,7 @@ &wkup_pmx0 { mcu_uart0_pins_default: mcu-uart0-pins-default { - u-boot,dm-spl; + bootph-pre-ram; pinctrl-single,pins = < J721S2_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /*(C24) WKUP_GPIO0_13.MCU_UART0_RXD*/ J721S2_WKUP_IOPAD(0x0f0, PIN_OUTPUT, 0) /*(C25) WKUP_GPIO0_12.MCU_UART0_TXD*/ @@ -134,7 +134,7 @@ }; wkup_uart0_pins_default: wkup-uart0-pins-default { - u-boot,dm-spl; + bootph-pre-ram; pinctrl-single,pins = < J721S2_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /*(E25) WKUP_GPIO0_6.WKUP_UART0_CTSn*/ J721S2_WKUP_IOPAD(0x0dc, PIN_OUTPUT, 0) /*(F28) WKUP_GPIO0_7.WKUP_UART0_RTSn*/ @@ -150,7 +150,7 @@ mbox-names = "tx", "rx", "notify"; ti,host-id = <4>; ti,secure-host; - u-boot,dm-spl; + bootph-pre-ram; }; &wkup_uart0 { |