summaryrefslogtreecommitdiff
path: root/arch/arm/dts/imx8mm.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/dts/imx8mm.dtsi')
-rw-r--r--arch/arm/dts/imx8mm.dtsi119
1 files changed, 99 insertions, 20 deletions
diff --git a/arch/arm/dts/imx8mm.dtsi b/arch/arm/dts/imx8mm.dtsi
index 1e5e11592f..05ee062548 100644
--- a/arch/arm/dts/imx8mm.dtsi
+++ b/arch/arm/dts/imx8mm.dtsi
@@ -18,10 +18,18 @@
aliases {
ethernet0 = &fec1;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
i2c3 = &i2c4;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc3;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
@@ -29,14 +37,6 @@
spi0 = &ecspi1;
spi1 = &ecspi2;
spi2 = &ecspi3;
- mmc0 = &usdhc1;
- mmc1 = &usdhc2;
- mmc2 = &usdhc3;
- gpio0 = &gpio1;
- gpio1 = &gpio2;
- gpio2 = &gpio3;
- gpio3 = &gpio4;
- gpio4 = &gpio5;
};
cpus {
@@ -68,6 +68,7 @@
nvmem-cells = <&cpu_speed_grade>;
nvmem-cell-names = "speed_grade";
cpu-idle-states = <&cpu_pd_wait>;
+ #cooling-cells = <2>;
};
A53_1: cpu@1 {
@@ -80,6 +81,7 @@
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
+ #cooling-cells = <2>;
};
A53_2: cpu@2 {
@@ -92,6 +94,7 @@
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
+ #cooling-cells = <2>;
};
A53_3: cpu@3 {
@@ -104,6 +107,7 @@
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
+ #cooling-cells = <2>;
};
A53_L2: l2-cache0 {
@@ -125,7 +129,7 @@
opp-1600000000 {
opp-hz = /bits/ 64 <1600000000>;
- opp-microvolt = <900000>;
+ opp-microvolt = <950000>;
opp-supported-hw = <0xc>, <0x7>;
clock-latency-ns = <150000>;
opp-suspend;
@@ -204,6 +208,38 @@
arm,no-tick-in-suspend;
};
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tmu>;
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit0: trip1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
usbphynop1: usbphynop1 {
compatible = "usb-nop-xceiv";
clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
@@ -227,12 +263,14 @@
ranges = <0x0 0x0 0x0 0x3e000000>;
aips1: bus@30000000 {
- compatible = "simple-bus";
+ compatible = "fsl,aips-bus", "simple-bus";
+ reg = <0x30000000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30000000 0x30000000 0x400000>;
sai1: sai@30010000 {
+ #sound-dai-cells = <0>;
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
reg = <0x30010000 0x10000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -246,6 +284,7 @@
};
sai2: sai@30020000 {
+ #sound-dai-cells = <0>;
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
reg = <0x30020000 0x10000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -273,6 +312,7 @@
};
sai5: sai@30050000 {
+ #sound-dai-cells = <0>;
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
reg = <0x30050000 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
@@ -286,6 +326,7 @@
};
sai6: sai@30060000 {
+ #sound-dai-cells = <0>;
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
reg = <0x30060000 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
@@ -363,6 +404,13 @@
gpio-ranges = <&iomuxc 0 119 30>;
};
+ tmu: tmu@30260000 {
+ compatible = "fsl,imx8mm-tmu";
+ reg = <0x30260000 0x10000>;
+ clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
+ #thermal-sensor-cells = <0>;
+ };
+
wdog1: watchdog@30280000 {
compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
reg = <0x30280000 0x10000>;
@@ -419,7 +467,7 @@
reg = <0x30340000 0x10000>;
};
- ocotp: ocotp-ctrl@30350000 {
+ ocotp: efuse@30350000 {
compatible = "fsl,imx8mm-ocotp", "syscon";
reg = <0x30350000 0x10000>;
clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
@@ -455,6 +503,8 @@
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&snvs>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
+ clock-names = "snvs-pwrkey";
linux,keycode = <KEY_POWER>;
wakeup-source;
status = "disabled";
@@ -469,16 +519,20 @@
<&clk_ext3>, <&clk_ext4>;
clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
"clk_ext3", "clk_ext4";
- assigned-clocks = <&clk IMX8MM_CLK_NOC>,
+ assigned-clocks = <&clk IMX8MM_CLK_A53_SRC>,
+ <&clk IMX8MM_CLK_A53_CORE>,
+ <&clk IMX8MM_CLK_NOC>,
<&clk IMX8MM_CLK_AUDIO_AHB>,
<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
<&clk IMX8MM_SYS_PLL3>,
<&clk IMX8MM_VIDEO_PLL1>,
<&clk IMX8MM_AUDIO_PLL1>,
<&clk IMX8MM_AUDIO_PLL2>;
- assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>,
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
+ <&clk IMX8MM_ARM_PLL_OUT>,
+ <&clk IMX8MM_SYS_PLL3_OUT>,
<&clk IMX8MM_SYS_PLL1_800M>;
- assigned-clock-rates = <0>,
+ assigned-clock-rates = <0>, <0>, <0>,
<400000000>,
<400000000>,
<750000000>,
@@ -496,7 +550,8 @@
};
aips2: bus@30400000 {
- compatible = "simple-bus";
+ compatible = "fsl,aips-bus", "simple-bus";
+ reg = <0x30400000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30400000 0x30400000 0x400000>;
@@ -555,10 +610,12 @@
};
aips3: bus@30800000 {
- compatible = "simple-bus";
+ compatible = "fsl,aips-bus", "simple-bus";
+ reg = <0x30800000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x30800000 0x30800000 0x400000>;
+ ranges = <0x30800000 0x30800000 0x400000>,
+ <0x8000000 0x8000000 0x10000000>;
ecspi1: spi@30820000 {
compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
@@ -718,6 +775,14 @@
status = "disabled";
};
+ mu: mailbox@30aa0000 {
+ compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu";
+ reg = <0x30aa0000 0x10000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_MU_ROOT>;
+ #mbox-cells = <2>;
+ };
+
usdhc1: mmc@30b40000 {
compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b40000 0x10000>;
@@ -760,6 +825,19 @@
status = "disabled";
};
+ flexspi: spi@30bb0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nxp,imx8mm-fspi";
+ reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
+ reg-names = "fspi_base", "fspi_mmap";
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
+ <&clk IMX8MM_CLK_QSPI_ROOT>;
+ clock-names = "fspi", "fspi_en";
+ status = "disabled";
+ };
+
sdma1: dma-controller@30bd0000 {
compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
reg = <0x30bd0000 0x10000>;
@@ -776,7 +854,8 @@
reg = <0x30be0000 0x10000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_ENET1_ROOT>,
<&clk IMX8MM_CLK_ENET1_ROOT>,
<&clk IMX8MM_CLK_ENET_TIMER>,
@@ -800,7 +879,8 @@
};
aips4: bus@32c00000 {
- compatible = "simple-bus";
+ compatible = "fsl,aips-bus", "simple-bus";
+ reg = <0x32c00000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x32c00000 0x32c00000 0x400000>;
@@ -896,7 +976,6 @@
ddr-pmu@3d800000 {
compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
reg = <0x3d800000 0x400000>;
- interrupt-parent = <&gic>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
};
};
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-06 21:46:25 +0000