diff options
Diffstat (limited to 'arch/arm/dts/imx8mm-beacon-som.dtsi')
| -rw-r--r-- | arch/arm/dts/imx8mm-beacon-som.dtsi | 44 |
1 files changed, 33 insertions, 11 deletions
diff --git a/arch/arm/dts/imx8mm-beacon-som.dtsi b/arch/arm/dts/imx8mm-beacon-som.dtsi index 801bd02eae..b88c3c99b0 100644 --- a/arch/arm/dts/imx8mm-beacon-som.dtsi +++ b/arch/arm/dts/imx8mm-beacon-som.dtsi @@ -24,6 +24,26 @@ cpu-supply = <&buck2_reg>; }; +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; @@ -52,9 +72,10 @@ pmic@4b { compatible = "rohm,bd71847"; reg = <0x4b>; + pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio1>; - interrupts = <3 GPIO_ACTIVE_LOW>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; rohm,reset-snvs-powered; regulators { @@ -116,7 +137,7 @@ ldo1_reg: LDO1 { regulator-name = "ldo1"; - regulator-min-microvolt = <3000000>; + regulator-min-microvolt = <1600000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; @@ -124,7 +145,7 @@ ldo2_reg: LDO2 { regulator-name = "ldo2"; - regulator-min-microvolt = <900000>; + regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; regulator-boot-on; regulator-always-on; @@ -164,7 +185,7 @@ status = "okay"; eeprom@50 { - compatible = "microchip, at24c64d", "atmel,24c64"; + compatible = "microchip,24c64", "atmel,24c64"; pagesize = <32>; read-only; /* Manufacturing EEPROM programmed at factory */ reg = <0x50>; @@ -190,6 +211,7 @@ host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; clocks = <&osc_32k>; + max-speed = <4000000>; clock-names = "extclk"; }; }; @@ -270,9 +292,9 @@ >; }; - pinctrl_pmic: pmicirq { + pinctrl_pmic: pmicirqgrp { fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 >; }; @@ -289,7 +311,7 @@ >; }; - pinctrl_usdhc1_gpio: usdhc1grpgpio { + pinctrl_usdhc1_gpio: usdhc1gpiogrp { fsl,pins = < MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41 >; @@ -306,7 +328,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 @@ -317,7 +339,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 @@ -344,7 +366,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = < MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 @@ -360,7 +382,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = < MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 |