summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/cpu')
-rw-r--r--arch/arm/cpu/armv7/Makefile2
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/Kconfig23
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/Makefile4
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/cpu.c6
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/fdt.c4
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S26
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c1
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/ppa.c2
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/spl.c20
9 files changed, 66 insertions, 22 deletions
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index 3a9913a86b..5fac252c0e 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -12,7 +12,7 @@ obj-y += cache_v7.o cache_v7_asm.o
obj-y += cpu.o cp15.o
obj-y += syslib.o
-ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_MX7)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_ARCH_SUNXI)$(CONFIG_ARCH_SOCFPGA)$(CONFIG_ARCH_MX7ULP)$(CONFIG_LS102XA),)
+ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_MX7)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_ARCH_SUNXI)$(CONFIG_ARCH_SOCFPGA)$(CONFIG_ARCH_MX7ULP)$(CONFIG_ARCH_LS1021A),)
ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y)
obj-y += lowlevel_init.o
endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index b24462bede..12fd80e7db 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -36,6 +36,7 @@ config ARCH_LS1046A
select SYS_FSL_DDR_VER_50
select SYS_FSL_ERRATUM_A008336
select SYS_FSL_ERRATUM_A008511
+ select SYS_FSL_ERRATUM_A008850
select SYS_FSL_ERRATUM_A009801
select SYS_FSL_ERRATUM_A009803
select SYS_FSL_ERRATUM_A009942
@@ -63,6 +64,8 @@ config ARCH_LS2080A
select SYS_FSL_SEC_COMPAT_5
select SYS_FSL_SEC_LE
select SYS_FSL_SRDS_2
+ select FSL_TZASC_1
+ select FSL_TZASC_2
select SYS_FSL_ERRATUM_A008336
select SYS_FSL_ERRATUM_A008511
select SYS_FSL_ERRATUM_A008514
@@ -171,6 +174,20 @@ config SYS_LS_PPA_FW_ADDR
QSPI flash, this address is a directly memory-mapped.
If it is in a serial accessed flash, such as NAND and SD
card, it is a byte offset.
+
+config SYS_LS_PPA_ESBC_ADDR
+ hex "hdr address of PPA firmware loading from"
+ depends on FSL_LS_PPA && CHAIN_OF_TRUST
+ default 0x600c0000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A
+ default 0x40740000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A
+ default 0x40480000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A
+ default 0x580c40000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3
+ help
+ If the PPA header firmware locate at XIP flash, such as NOR or
+ QSPI flash, this address is a directly memory-mapped.
+ If it is in a serial accessed flash, such as NAND and SD
+ card, it is a byte offset.
+
endmenu
config SYS_FSL_ERRATUM_A010315
@@ -223,6 +240,12 @@ config SYS_FSL_SRDS_2
config SYS_HAS_SERDES
bool
+config FSL_TZASC_1
+ bool
+
+config FSL_TZASC_2
+ bool
+
endmenu
menu "Layerscape clock tree configuration"
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index c9ab93e3d7..e3ce0184d8 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -22,11 +22,11 @@ obj-$(CONFIG_SYS_HAS_SERDES) += fsl_lsch2_serdes.o
endif
endif
-ifneq ($(CONFIG_LS2080A),)
+ifneq ($(CONFIG_ARCH_LS2080A),)
obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o
endif
-ifneq ($(CONFIG_LS1043A),)
+ifneq ($(CONFIG_ARCH_LS1043A),)
obj-$(CONFIG_SYS_HAS_SERDES) += ls1043a_serdes.o
obj-$(CONFIG_ARMV8_PSCI) += ls1043a_psci.o
endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index d446527616..c24f3f173c 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -92,7 +92,7 @@ static inline void early_mmu_setup(void)
static void fix_pcie_mmu_map(void)
{
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
unsigned int i;
u32 svr, ver;
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
@@ -523,7 +523,7 @@ int timer_init(void)
#ifdef CONFIG_FSL_LSCH3
u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR;
#endif
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET;
u32 svr_dev_id;
#endif
@@ -541,7 +541,7 @@ int timer_init(void)
out_le32(cltbenr, 0xf);
#endif
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
/*
* In certain Layerscape SoCs, the clock for each core's
* has an enable bit in the PMU Physical Core Time Base Enable
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
index 762a95b945..05c4577753 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
@@ -373,8 +373,8 @@ void ft_cpu_setup(void *blob, bd_t *bd)
"clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
#endif
- do_fixup_by_compat_u32(blob, "fixed-clock",
- "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
+ do_fixup_by_path_u32(blob, "/sysclk", "clock-frequency",
+ CONFIG_SYS_CLK_FREQ, 1);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
index a2185f2def..f427356104 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
+++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
@@ -76,7 +76,7 @@ ENTRY(lowlevel_init)
#ifdef CONFIG_FSL_LSCH3
/* Set Wuo bit for RN-I 20 */
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
ldr x0, =CCI_AUX_CONTROL_BASE(20)
ldr x1, =0x00000010
bl ccn504_set_aux
@@ -229,38 +229,40 @@ ENTRY(lowlevel_init)
* NOTE: As per the CCSR map doc, TZASC 3 and TZASC 4 are just
* placeholders.
*/
+#ifdef CONFIG_FSL_TZASC_1
ldr x1, =TZASC_GATE_KEEPER(0)
ldr w0, [x1] /* Filter 0 Gate Keeper Register */
orr w0, w0, #1 << 0 /* Set open_request for Filter 0 */
str w0, [x1]
- ldr x1, =TZASC_GATE_KEEPER(1)
- ldr w0, [x1] /* Filter 0 Gate Keeper Register */
- orr w0, w0, #1 << 0 /* Set open_request for Filter 0 */
- str w0, [x1]
-
ldr x1, =TZASC_REGION_ATTRIBUTES_0(0)
ldr w0, [x1] /* Region-0 Attributes Register */
orr w0, w0, #1 << 31 /* Set Sec global write en, Bit[31] */
orr w0, w0, #1 << 30 /* Set Sec global read en, Bit[30] */
str w0, [x1]
+ ldr x1, =TZASC_REGION_ID_ACCESS_0(0)
+ ldr w0, [x1] /* Region-0 Access Register */
+ mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */
+ str w0, [x1]
+#endif
+#ifdef CONFIG_FSL_TZASC_2
+ ldr x1, =TZASC_GATE_KEEPER(1)
+ ldr w0, [x1] /* Filter 0 Gate Keeper Register */
+ orr w0, w0, #1 << 0 /* Set open_request for Filter 0 */
+ str w0, [x1]
+
ldr x1, =TZASC_REGION_ATTRIBUTES_0(1)
ldr w0, [x1] /* Region-1 Attributes Register */
orr w0, w0, #1 << 31 /* Set Sec global write en, Bit[31] */
orr w0, w0, #1 << 30 /* Set Sec global read en, Bit[30] */
str w0, [x1]
- ldr x1, =TZASC_REGION_ID_ACCESS_0(0)
- ldr w0, [x1] /* Region-0 Access Register */
- mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */
- str w0, [x1]
-
ldr x1, =TZASC_REGION_ID_ACCESS_0(1)
ldr w0, [x1] /* Region-1 Attributes Register */
mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */
str w0, [x1]
-
+#endif
isb
dsb sy
#endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c
index ab83e85adc..4db3c76d72 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c
@@ -70,6 +70,7 @@ static struct serdes_config serdes2_cfg_tbl[] = {
SATA2 } },
{0x4A, {SGMII9, SGMII10, SGMII11, SGMII12, PCIE4, PCIE4, SATA1,
SATA2 } },
+ {0x51, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4 } },
{0x57, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SGMII15, SGMII16 } },
{}
};
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
index b35ad5fb6f..7f87bb8689 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
@@ -178,7 +178,7 @@ int ppa_init(void)
ppa_img_addr = (uintptr_t)ppa_fit_addr;
if (fsl_check_boot_mode_secure() != 0) {
ret = fsl_secboot_validate(ppa_esbc_hdr,
- CONFIG_PPA_KEY_HASH,
+ PPA_KEY_HASH,
&ppa_img_addr);
if (ret != 0)
printf("PPA validation failed\n");
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
index 73a8680741..eb730e84a4 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@@ -41,13 +41,31 @@ u32 spl_boot_mode(const u32 boot_device)
}
#ifdef CONFIG_SPL_BUILD
+
+void spl_board_init(void)
+{
+#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_FSL_LSCH2)
+ /*
+ * In case of Secure Boot, the IBR configures the SMMU
+ * to allow only Secure transactions.
+ * SMMU must be reset in bypass mode.
+ * Set the ClientPD bit and Clear the USFCFG Bit
+ */
+ u32 val;
+ val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
+ out_le32(SMMU_SCR0, val);
+ val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
+ out_le32(SMMU_NSCR0, val);
+#endif
+}
+
void board_init_f(ulong dummy)
{
/* Clear global data */
memset((void *)gd, 0, sizeof(gd_t));
board_early_init_f();
timer_init();
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
env_init();
#endif
get_clocks();
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-05 09:56:33 +0000